From: Thomas Gleixner tglx@linutronix.de
stable inclusion from stable-v5.15.168 commit e479cb835feeb2abff97f25766e23b96a6eabe28 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYRCY CVE: CVE-2024-49927
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit 830802a0fea8fb39d3dc9fb7d6b5581e1343eb1f ]
Breno observed panics when using failslab under certain conditions during runtime:
can not alloc irq_pin_list (-1,0,20) Kernel panic - not syncing: IO-APIC: failed to add irq-pin. Can not proceed
panic+0x4e9/0x590 mp_irqdomain_alloc+0x9ab/0xa80 irq_domain_alloc_irqs_locked+0x25d/0x8d0 __irq_domain_alloc_irqs+0x80/0x110 mp_map_pin_to_irq+0x645/0x890 acpi_register_gsi_ioapic+0xe6/0x150 hpet_open+0x313/0x480
That's a pointless panic which is a leftover of the historic IO/APIC code which panic'ed during early boot when the interrupt allocation failed.
The only place which might justify panic is the PIT/HPET timer_check() code which tries to figure out whether the timer interrupt is delivered through the IO/APIC. But that code does not require to handle interrupt allocation failures. If the interrupt cannot be allocated then timer delivery fails and it either panics due to that or falls back to legacy mode.
Cure this by removing the panic wrapper around __add_pin_to_irq_node() and making mp_irqdomain_alloc() aware of the failure condition and handle it as any other failure in this function gracefully.
Reported-by: Breno Leitao leitao@debian.org Signed-off-by: Thomas Gleixner tglx@linutronix.de Tested-by: Breno Leitao leitao@debian.org Tested-by: Qiuxu Zhuo qiuxu.zhuo@intel.com Link: https://lore.kernel.org/all/ZqfJmUF8sXIyuSHN@gmail.com Link: https://lore.kernel.org/all/20240802155440.275200843@linutronix.de Signed-off-by: Sasha Levin sashal@kernel.org
Conflicts: arch/x86/kernel/apic/io_apic.c [adjust context conflicts] Signed-off-by: Jinjie Ruan ruanjinjie@huawei.com --- arch/x86/kernel/apic/io_apic.c | 46 ++++++++++++++++------------------ 1 file changed, 22 insertions(+), 24 deletions(-)
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index a63366344fcf..b183a49525d2 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -371,27 +371,26 @@ static void ioapic_mask_entry(int apic, int pin) * shared ISA-space IRQs, so we have to support them. We are super * fast in the common case, and fast for shared ISA-space IRQs. */ -static int __add_pin_to_irq_node(struct mp_chip_data *data, - int node, int apic, int pin) +static bool add_pin_to_irq_node(struct mp_chip_data *data, int node, int apic, int pin) { struct irq_pin_list *entry;
- /* don't allow duplicates */ - for_each_irq_pin(entry, data->irq_2_pin) + /* Don't allow duplicates */ + for_each_irq_pin(entry, data->irq_2_pin) { if (entry->apic == apic && entry->pin == pin) - return 0; + return true; + }
entry = kzalloc_node(sizeof(struct irq_pin_list), GFP_ATOMIC, node); if (!entry) { - pr_err("can not alloc irq_pin_list (%d,%d,%d)\n", - node, apic, pin); - return -ENOMEM; + pr_err("Cannot allocate irq_pin_list (%d,%d,%d)\n", node, apic, pin); + return false; } + entry->apic = apic; entry->pin = pin; list_add_tail(&entry->list, &data->irq_2_pin); - - return 0; + return true; }
static void __remove_pin_from_irq(struct mp_chip_data *data, int apic, int pin) @@ -406,13 +405,6 @@ static void __remove_pin_from_irq(struct mp_chip_data *data, int apic, int pin) } }
-static void add_pin_to_irq_node(struct mp_chip_data *data, - int node, int apic, int pin) -{ - if (__add_pin_to_irq_node(data, node, apic, pin)) - panic("IO-APIC: failed to add irq-pin. Can not proceed\n"); -} - /* * Reroute an IRQ to a different pin. */ @@ -1012,8 +1004,7 @@ static int alloc_isa_irq_from_domain(struct irq_domain *domain, if (irq_data && irq_data->parent_data) { if (!mp_check_pin_attr(irq, info)) return -EBUSY; - if (__add_pin_to_irq_node(irq_data->chip_data, node, ioapic, - info->ioapic_pin)) + if (!add_pin_to_irq_node(irq_data->chip_data, node, ioapic, info->ioapic.pin)) return -ENOMEM; } else { info->flags |= X86_IRQ_ALLOC_LEGACY; @@ -2993,10 +2984,8 @@ int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
info->ioapic_entry = &data->entry; ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, info); - if (ret < 0) { - kfree(data); - return ret; - } + if (ret < 0) + goto free_data;
INIT_LIST_HEAD(&data->irq_2_pin); irq_data->hwirq = info->ioapic_pin; @@ -3006,7 +2995,10 @@ int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq, mp_irqdomain_get_attr(mp_pin_to_gsi(ioapic, pin), data, info);
cfg = irqd_cfg(irq_data); - add_pin_to_irq_node(data, ioapic_alloc_attr_node(info), ioapic, pin); + if (!add_pin_to_irq_node(data, ioapic_alloc_attr_node(info), ioapic, pin)) { + ret = -ENOMEM; + goto free_irqs; + }
local_irq_save(flags); if (info->ioapic_entry) @@ -3022,6 +3014,12 @@ int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq, virq, data->trigger, data->polarity, cfg->dest_apicid);
return 0; + +free_irqs: + irq_domain_free_irqs_parent(domain, virq, nr_irqs); +free_data: + kfree(data); + return ret; }
void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq,
反馈: 您发送到kernel@openeuler.org的补丁/补丁集,转换为PR失败! 邮件列表地址:https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/4... 失败原因:同步源码仓代码到fork仓失败 建议解决方法:请稍等,机器人会在下一次任务重新执行
FeedBack: The patch(es) which you have sent to kernel@openeuler.org has been converted to PR failed! Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/4... Failed Reason: sync origin kernel's codes to the fork repository failed Suggest Solution: please wait, the bot will retry in the next interval
反馈: 您发送到kernel@openeuler.org的补丁/补丁集,已成功转换为PR! PR链接地址: https://gitee.com/openeuler/kernel/pulls/12368 邮件列表地址:https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/4...
FeedBack: The patch(es) which you have sent to kernel@openeuler.org mailing list has been converted to a pull request successfully! Pull request link: https://gitee.com/openeuler/kernel/pulls/12368 Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/4...