*** BLURB HERE ***
Alan Stern (1): USB: legotower: fix logical error in recent commit
Alexander Sverdlin (1): serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access
Bui Quang Minh (1): USB: dummy-hcd: Fix uninitialized array use in init()
Hans de Goede (1): xhci-pci: Allow host runtime PM as default for Intel Alpine Ridge LP
Li Jun (1): xhci: Give USB2 ports time to enter U3 in bus suspend
Mika Westerberg (1): xhci-pci: Allow host runtime PM as default for Intel Maple Ridge xHCI
Oliver Neukum (2): USB: add RESET_RESUME quirk for Snapscan 1212 USB: UAS: introduce a quirk to set no_write_same
Peilin Ye (1): ptrace: Prevent kernel-infoleak in ptrace_get_syscall_info()
Steven Rostedt (VMware) (2): ktest.pl: If size of log is too big to email, email error message ktest.pl: Fix the logic for truncating the size of the log file for email
Takashi Iwai (3): ALSA: usb-audio: Fix potential out-of-bounds shift ALSA: usb-audio: Fix control 'access overflow' errors from chmap ALSA: pcm: oss: Fix potential out-of-bounds shift
Tejas Joglekar (1): usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK
Thomas Gleixner (1): USB: sisusbvga: Make console support depend on BROKEN
.../admin-guide/kernel-parameters.txt | 1 + drivers/tty/serial/8250/8250_omap.c | 5 ----- drivers/usb/core/quirks.c | 3 +++ drivers/usb/gadget/udc/dummy_hcd.c | 2 +- drivers/usb/host/xhci-hub.c | 4 ++++ drivers/usb/host/xhci-pci.c | 6 +++++- drivers/usb/host/xhci-plat.c | 3 +++ drivers/usb/host/xhci.h | 1 + drivers/usb/misc/legousbtower.c | 2 +- drivers/usb/misc/sisusbvga/Kconfig | 2 +- drivers/usb/storage/uas.c | 3 +++ drivers/usb/storage/unusual_uas.h | 7 +++++-- drivers/usb/storage/usb.c | 3 +++ include/linux/usb_usual.h | 2 ++ include/uapi/linux/ptrace.h | 3 ++- sound/core/oss/pcm_oss.c | 6 +++++- sound/usb/format.c | 2 ++ sound/usb/stream.c | 6 +++--- tools/testing/ktest/ktest.pl | 20 +++++++++++-------- 19 files changed, 57 insertions(+), 24 deletions(-)
From: Peilin Ye yepeilin.cs@gmail.com
stable inclusion from stable-5.10.2 commit d3f4117b0275b2fb2de3a034fe1060a80104833f bugzilla: 46859
--------------------------------
commit 0032ce0f85a269a006e91277be5fdbc05fad8426 upstream.
ptrace_get_syscall_info() is potentially copying uninitialized stack memory to userspace, since the compiler may leave a 3-byte hole near the beginning of `info`. Fix it by adding a padding field to `struct ptrace_syscall_info`.
Fixes: 201766a20e30 ("ptrace: add PTRACE_GET_SYSCALL_INFO request") Suggested-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Peilin Ye yepeilin.cs@gmail.com Reviewed-by: Dmitry V. Levin ldv@altlinux.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200801152044.230416-1-yepeilin.cs@gmail.com Signed-off-by: Christian Brauner christian.brauner@ubuntu.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/uapi/linux/ptrace.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/uapi/linux/ptrace.h b/include/uapi/linux/ptrace.h index a71b6e3b03eb..83ee45fa634b 100644 --- a/include/uapi/linux/ptrace.h +++ b/include/uapi/linux/ptrace.h @@ -81,7 +81,8 @@ struct seccomp_metadata {
struct ptrace_syscall_info { __u8 op; /* PTRACE_SYSCALL_INFO_* */ - __u32 arch __attribute__((__aligned__(sizeof(__u32)))); + __u8 pad[3]; + __u32 arch; __u64 instruction_pointer; __u64 stack_pointer; union {
From: "Steven Rostedt (VMware)" rostedt@goodmis.org
stable inclusion from stable-5.10.2 commit 4e282a8dff800c535a5828dc7d2e46cb18ddbc18 bugzilla: 46859
--------------------------------
commit 8cd6bc0359deebd8500e6de95899a8a78d3ec4ba upstream.
If the size of the error log is too big to send via email, and the sending fails, it wont email any result. This can be confusing for the user who is waiting for an email on the completion of the tests.
If it fails to send email, then try again without the log file stating that it failed to send an email. Obviously this will not be of use if the sending of email failed for some other reasons, but it will at least give the user some information when it fails for the most common reason.
Cc: stable@vger.kernel.org Fixes: c2d84ddb338c8 ("ktest.pl: Add MAIL_COMMAND option to define how to send email") Signed-off-by: Steven Rostedt (VMware) rostedt@goodmis.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/testing/ktest/ktest.pl | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 54188ee16c48..54f7d008e840 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -4253,7 +4253,12 @@ sub do_send_mail { $mail_command =~ s/$SUBJECT/$subject/g; $mail_command =~ s/$MESSAGE/$message/g;
- run_command $mail_command; + my $ret = run_command $mail_command; + if (!$ret && defined($file)) { + # try again without the file + $message .= "\n\n*** FAILED TO SEND LOG ***\n\n"; + do_send_email($subject, $message); + } }
sub send_email {
From: "Steven Rostedt (VMware)" rostedt@goodmis.org
stable inclusion from stable-5.10.2 commit 2902e302991a4dacd155658bcb3053e4d6b7d4a0 bugzilla: 46859
--------------------------------
commit 170f4869e66275f498ae4736106fb54c0fdcd036 upstream.
The logic for truncating the log file for emailing based on the MAIL_MAX_SIZE option is confusing and incorrect. Simplify it and have the tail of the log file truncated to the max size specified in the config.
Cc: stable@vger.kernel.org Fixes: 855d8abd2e8ff ("ktest.pl: Change the logic to control the size of the log file emailed") Signed-off-by: Steven Rostedt (VMware) rostedt@goodmis.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/testing/ktest/ktest.pl | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 54f7d008e840..4e2450964517 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -1499,17 +1499,16 @@ sub dodie { my $log_file;
if (defined($opt{"LOG_FILE"})) { - my $whence = 0; # beginning of file - my $pos = $test_log_start; + my $whence = 2; # End of file + my $log_size = tell LOG; + my $size = $log_size - $test_log_start;
if (defined($mail_max_size)) { - my $log_size = tell LOG; - $log_size -= $test_log_start; - if ($log_size > $mail_max_size) { - $whence = 2; # end of file - $pos = - $mail_max_size; + if ($size > $mail_max_size) { + $size = $mail_max_size; } } + my $pos = - $size; $log_file = "$tmpdir/log"; open (L, "$opt{LOG_FILE}") or die "Can't open $opt{LOG_FILE} to read)"; open (O, "> $tmpdir/log") or die "Can't open $tmpdir/log\n";
From: Alan Stern stern@rowland.harvard.edu
stable inclusion from stable-5.10.2 commit d483f5e5ce532e410dc10d91a025f12ee3fd2c82 bugzilla: 46859
--------------------------------
commit b175d273d4e4100b66e68f0675fef7a3c07a7957 upstream.
Commit d9f0d82f06c6 ("USB: legousbtower: use usb_control_msg_recv()") contained an elementary logical error. The check of the return code from the new usb_control_msg_recv() function was inverted.
Reported-and-tested-by: syzbot+9be25235b7a69b24d117@syzkaller.appspotmail.com Signed-off-by: Alan Stern stern@rowland.harvard.edu Link: https://lore.kernel.org/r/20201208163042.GD1298255@rowland.harvard.edu Fixes: d9f0d82f06c6 ("USB: legousbtower: use usb_control_msg_recv()") Cc: stable stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/misc/legousbtower.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index ba655b4af4fc..1c9e09138c10 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -797,7 +797,7 @@ static int tower_probe(struct usb_interface *interface, const struct usb_device_ &get_version_reply, sizeof(get_version_reply), 1000, GFP_KERNEL); - if (!result) { + if (result) { dev_err(idev, "get version request failed: %d\n", result); retval = result; goto error;
From: Bui Quang Minh minhquangbui99@gmail.com
stable inclusion from stable-5.10.2 commit 5fb2a55ad3e0a7f3c5094c36a54c230355ed3d38 bugzilla: 46859
--------------------------------
commit e90cfa813da7a527785033a0b247594c2de93dd8 upstream.
This error path
err_add_pdata: for (i = 0; i < mod_data.num; i++) kfree(dum[i]);
can be triggered when not all dum's elements are initialized.
Fix this by initializing all dum's elements to NULL.
Acked-by: Alan Stern stern@rowland.harvard.edu Cc: stable stable@vger.kernel.org Signed-off-by: Bui Quang Minh minhquangbui99@gmail.com Link: https://lore.kernel.org/r/1607063090-3426-1-git-send-email-minhquangbui99@gm... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/gadget/udc/dummy_hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index 53a227217f1c..99c1ebe86f6a 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -2734,7 +2734,7 @@ static int __init init(void) { int retval = -ENOMEM; int i; - struct dummy *dum[MAX_NUM_UDC]; + struct dummy *dum[MAX_NUM_UDC] = {};
if (usb_disabled()) return -ENODEV;
From: Oliver Neukum oneukum@suse.com
stable inclusion from stable-5.10.2 commit d8f0c9ec3638be7344a3e8ebe4415aae1b356981 bugzilla: 46859
--------------------------------
commit 08a02f954b0def3ada8ed6d4b2c7bcb67e885e9c upstream.
I got reports that some models of this old scanner need this when using runtime PM.
Signed-off-by: Oliver Neukum oneukum@suse.com Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20201207130323.23857-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index fad31ccd1fa8..1b4eb7046b07 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -342,6 +342,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x06a3, 0x0006), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS },
+ /* Agfa SNAPSCAN 1212U */ + { USB_DEVICE(0x06bd, 0x0001), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Guillemot Webcam Hercules Dualpix Exchange (2nd ID) */ { USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
From: Takashi Iwai tiwai@suse.de
stable inclusion from stable-5.10.2 commit cc3edd81ef035b728955241dca8a3b3c2f333ab6 bugzilla: 46859
--------------------------------
commit 43d5ca88dfcd35e43010fdd818e067aa9a55f5ba upstream.
syzbot spotted a potential out-of-bounds shift in the USB-audio format parser that receives the arbitrary shift value from the USB descriptor.
Add a range check for avoiding the undefined behavior.
Reported-by: syzbot+df7dc146ebdd6435eea3@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201209084552.17109-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/usb/format.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/sound/usb/format.c b/sound/usb/format.c index 3bfead393aa3..91f0ed4a2e7e 100644 --- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -40,6 +40,8 @@ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip, case UAC_VERSION_1: default: { struct uac_format_type_i_discrete_descriptor *fmt = _fmt; + if (format >= 64) + return 0; /* invalid format */ sample_width = fmt->bBitResolution; sample_bytes = fmt->bSubframeSize; format = 1ULL << format;
From: Takashi Iwai tiwai@suse.de
stable inclusion from stable-5.10.2 commit f1e6ab052c63a3bf3871aa2a8ec846feb7a77be2 bugzilla: 46859
--------------------------------
commit c6dde8ffd071aea9d1ce64279178e470977b235c upstream.
The current channel-map control implementation in USB-audio driver may lead to an error message like "control 3:0:0:Playback Channel Map:0: access overflow" when CONFIG_SND_CTL_VALIDATION is set. It's because the chmap get callback clears the whole array no matter which count is set, and rather the false-positive detection.
This patch fixes the problem by clearing only the needed array range at usb_chmap_ctl_get().
Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201211130048.6358-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/usb/stream.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/usb/stream.c b/sound/usb/stream.c index ca76ba5b5c0b..2f6d39c2ba7c 100644 --- a/sound/usb/stream.c +++ b/sound/usb/stream.c @@ -193,16 +193,16 @@ static int usb_chmap_ctl_get(struct snd_kcontrol *kcontrol, struct snd_pcm_chmap *info = snd_kcontrol_chip(kcontrol); struct snd_usb_substream *subs = info->private_data; struct snd_pcm_chmap_elem *chmap = NULL; - int i; + int i = 0;
- memset(ucontrol->value.integer.value, 0, - sizeof(ucontrol->value.integer.value)); if (subs->cur_audiofmt) chmap = subs->cur_audiofmt->chmap; if (chmap) { for (i = 0; i < chmap->channels; i++) ucontrol->value.integer.value[i] = chmap->map[i]; } + for (; i < subs->channels_max; i++) + ucontrol->value.integer.value[i] = 0; return 0; }
From: Li Jun jun.li@nxp.com
stable inclusion from stable-5.10.2 commit 2bd9751e6790c45377628c09b92afbc4f1bfe4ed bugzilla: 46859
--------------------------------
commit c1373f10479b624fb6dba0805d673e860f1b421d upstream.
If a USB2 device wakeup is not enabled/supported the link state may still be in U0 in xhci_bus_suspend(), where it's then manually put to suspended U3 state.
Just as with selective suspend the device needs time to enter U3 suspend before continuing with further suspend operations (e.g. system suspend), otherwise we may enter system suspend with link state in U0.
[commit message rewording -Mathias]
Cc: stable@vger.kernel.org Signed-off-by: Li Jun jun.li@nxp.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20201208092912.1773650-6-mathias.nyman@linux.intel... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci-hub.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index c799ca5361d4..74c497fd3476 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1712,6 +1712,10 @@ int xhci_bus_suspend(struct usb_hcd *hcd) hcd->state = HC_STATE_SUSPENDED; bus_state->next_statechange = jiffies + msecs_to_jiffies(10); spin_unlock_irqrestore(&xhci->lock, flags); + + if (bus_state->bus_suspended) + usleep_range(5000, 10000); + return 0; }
From: Tejas Joglekar Tejas.Joglekar@synopsys.com
stable inclusion from stable-5.10.2 commit 1bee58e891f26a4246ad10fcc9c8c7e173a898f4 bugzilla: 46859
--------------------------------
commit bac1ec551434697ca3c5bb5d258811ba5446866a upstream.
This commit uses the private data passed by parent device to set the quirk for Synopsys xHC. This patch fixes the SNPS xHC hang issue when the data is scattered across small buffers which does not make atleast MPS size for given TRB cache size of SNPS xHC.
Signed-off-by: Tejas Joglekar joglekar@synopsys.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20201208092912.1773650-2-mathias.nyman@linux.intel... Cc: stable stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci-plat.c | 3 +++ drivers/usb/host/xhci.h | 1 + 2 files changed, 4 insertions(+)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index aa2d35f98200..4d34f6005381 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -333,6 +333,9 @@ static int xhci_plat_probe(struct platform_device *pdev) if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT)) hcd->skip_phy_initialization = 1;
+ if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK)) + xhci->quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK; + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) goto disable_usb_phy; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index ebb359ebb261..d90c0d5df3b3 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1878,6 +1878,7 @@ struct xhci_hcd { #define XHCI_RENESAS_FW_QUIRK BIT_ULL(36) #define XHCI_SKIP_PHY_INIT BIT_ULL(37) #define XHCI_DISABLE_SPARSE BIT_ULL(38) +#define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39)
unsigned int num_active_eps; unsigned int limit_active_eps;
From: Hans de Goede hdegoede@redhat.com
stable inclusion from stable-5.10.2 commit 3203c4abf5051790411a0b49393b9f00a45f191a bugzilla: 46859
--------------------------------
commit c4d1ca05b8e68a4b5a3c4455cb6ec25b3df6d9dd upstream.
The xHCI controller on Alpine Ridge LP keeps the whole Thunderbolt controller awake if the host controller is not allowed to sleep. This is the case even if no USB devices are connected to the host.
Add the Intel Alpine Ridge LP product-id to the list of product-ids for which we allow runtime PM by default.
Fixes: 2815ef7fe4d4 ("xhci-pci: allow host runtime PM as default for Intel Alpine and Titan Ridge") Cc: stable@vger.kernel.org Reviewed-by: Mika Westerberg mika.westerberg@linux.intel.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20201208092912.1773650-4-mathias.nyman@linux.intel... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci-pci.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index bf89172c43ca..5f94d7edeb37 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -47,6 +47,7 @@ #define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI 0x15b5 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI 0x15b6 +#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI 0x15c1 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI 0x15db #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI 0x15d4 #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI 0x15e9 @@ -232,6 +233,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI ||
From: Mika Westerberg mika.westerberg@linux.intel.com
stable inclusion from stable-5.10.2 commit d769a22dc01fc01d9b08199472dfab27e378a052 bugzilla: 46859
--------------------------------
commit 5a8e3229ac27956bdcc25b2709e5d196d109a27a upstream.
Intel Maple Ridge is successor of Titan Ridge Thunderbolt controller. As Titan Ridge this one also includes xHCI host controller. In order to safe energy we should put it to low power state by default when idle. For this reason allow host runtime PM for Maple Ridge.
Signed-off-by: Mika Westerberg mika.westerberg@linux.intel.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20201208092912.1773650-5-mathias.nyman@linux.intel... Cc: stable stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci-pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 5f94d7edeb37..84da8406d5b4 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -56,6 +56,7 @@ #define PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI 0x8a13 #define PCI_DEVICE_ID_INTEL_CML_XHCI 0xa3af #define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI 0x9a13 +#define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI 0x1138
#define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba @@ -240,7 +241,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI)) + pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI)) xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
From: Oliver Neukum oneukum@suse.com
stable inclusion from stable-5.10.2 commit 2440c1cb2514447ac4a4e585b47d78d8b85f41b9 bugzilla: 46859
--------------------------------
commit 8010622c86ca5bb44bc98492f5968726fc7c7a21 upstream.
UAS does not share the pessimistic assumption storage is making that devices cannot deal with WRITE_SAME. A few devices supported by UAS, are reported to not deal well with WRITE_SAME. Those need a quirk.
Add it to the device that needs it.
Reported-by: David C. Partridge david.partridge@perdrix.co.uk Signed-off-by: Oliver Neukum oneukum@suse.com Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20201209152639.9195-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- Documentation/admin-guide/kernel-parameters.txt | 1 + drivers/usb/storage/uas.c | 3 +++ drivers/usb/storage/unusual_uas.h | 7 +++++-- drivers/usb/storage/usb.c | 3 +++ include/linux/usb_usual.h | 2 ++ 5 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 44fde25bb221..f6a1513dfb76 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -5663,6 +5663,7 @@ device); j = NO_REPORT_LUNS (don't use report luns command, uas only); + k = NO_SAME (do not use WRITE_SAME, uas only) l = NOT_LOCKABLE (don't try to lock and unlock ejectable media, not on uas); m = MAX_SECTORS_64 (don't transfer more diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 652d6d6f1f36..ff6f41e7e068 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -867,6 +867,9 @@ static int uas_slave_configure(struct scsi_device *sdev) if (devinfo->flags & US_FL_NO_READ_CAPACITY_16) sdev->no_read_capacity_16 = 1;
+ /* Some disks cannot handle WRITE_SAME */ + if (devinfo->flags & US_FL_NO_SAME) + sdev->no_write_same = 1; /* * Some disks return the total number of blocks in response * to READ CAPACITY rather than the highest block number. diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 711ab240058c..870e9cf3d5dc 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -35,12 +35,15 @@ UNUSUAL_DEV(0x054c, 0x087d, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_REPORT_OPCODES),
-/* Reported-by: Julian Groß julian.g@posteo.de */ +/* + * Initially Reported-by: Julian Groß julian.g@posteo.de + * Further reports David C. Partridge david.partridge@perdrix.co.uk + */ UNUSUAL_DEV(0x059f, 0x105f, 0x0000, 0x9999, "LaCie", "2Big Quadra USB3", USB_SC_DEVICE, USB_PR_DEVICE, NULL, - US_FL_NO_REPORT_OPCODES), + US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME),
/* * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 94a64729dc27..90aa9c12ffac 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -541,6 +541,9 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags) case 'j': f |= US_FL_NO_REPORT_LUNS; break; + case 'k': + f |= US_FL_NO_SAME; + break; case 'l': f |= US_FL_NOT_LOCKABLE; break; diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index 4a19ac3f24d0..6b03fdd69d27 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -84,6 +84,8 @@ /* Cannot handle REPORT_LUNS */ \ US_FLAG(ALWAYS_SYNC, 0x20000000) \ /* lies about caching, so always sync */ \ + US_FLAG(NO_SAME, 0x40000000) \ + /* Cannot handle WRITE_SAME */ \
#define US_FLAG(name, value) US_FL_##name = value , enum { US_DO_ALL_FLAGS };
From: Thomas Gleixner tglx@linutronix.de
stable inclusion from stable-5.10.2 commit 07747a44be4f4e042b0f93f853bc709022980d02 bugzilla: 46859
--------------------------------
commit 862ee699fefe1e6d6f2c1518395f0b999b8beb15 upstream.
The console part of sisusbvga is broken vs. printk(). It uses in_atomic() to detect contexts in which it cannot sleep despite the big fat comment in preempt.h which says: Do not use in_atomic() in driver code.
in_atomic() does not work on kernels with CONFIG_PREEMPT_COUNT=n which means that spin/rw_lock held regions are not detected by it.
There is no way to make this work by handing context information through to the driver and this only can be solved once the core printk infrastructure supports sleepable console drivers.
Make it depend on BROKEN for now.
Fixes: 1bbb4f2035d9 ("[PATCH] USB: sisusb[vga] update") Signed-off-by: Thomas Gleixner tglx@linutronix.de Cc: Thomas Winischhofer thomas@winischhofer.net Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: linux-usb@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201019101109.603244207@linutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/misc/sisusbvga/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig index 655d9cb0651a..c12cdd015410 100644 --- a/drivers/usb/misc/sisusbvga/Kconfig +++ b/drivers/usb/misc/sisusbvga/Kconfig @@ -16,7 +16,7 @@ config USB_SISUSBVGA
config USB_SISUSBVGA_CON bool "Text console and mode switching support" if USB_SISUSBVGA - depends on VT + depends on VT && BROKEN select FONT_8x16 help Say Y here if you want a VGA text console via the USB dongle or
From: Takashi Iwai tiwai@suse.de
stable inclusion from stable-5.10.2 commit ff654f1d31d5fe2962ea49476635c795653e289a bugzilla: 46859
--------------------------------
commit 175b8d89fe292796811fdee87fa39799a5b6b87a upstream.
syzbot spotted a potential out-of-bounds shift in the PCM OSS layer where it calculates the buffer size with the arbitrary shift value given via an ioctl.
Add a range check for avoiding the undefined behavior. As the value can be treated by a signed integer, the max shift should be 30.
Reported-by: syzbot+df7dc146ebdd6435eea3@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201209084552.17109-2-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/core/oss/pcm_oss.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c index 327ec42a36b0..de1917484647 100644 --- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -1935,11 +1935,15 @@ static int snd_pcm_oss_set_subdivide(struct snd_pcm_oss_file *pcm_oss_file, int static int snd_pcm_oss_set_fragment1(struct snd_pcm_substream *substream, unsigned int val) { struct snd_pcm_runtime *runtime; + int fragshift;
runtime = substream->runtime; if (runtime->oss.subdivision || runtime->oss.fragshift) return -EINVAL; - runtime->oss.fragshift = val & 0xffff; + fragshift = val & 0xffff; + if (fragshift >= 31) + return -EINVAL; + runtime->oss.fragshift = fragshift; runtime->oss.maxfrags = (val >> 16) & 0xffff; if (runtime->oss.fragshift < 4) /* < 16 */ runtime->oss.fragshift = 4;
From: Alexander Sverdlin alexander.sverdlin@gmail.com
stable inclusion from stable-5.10.2 commit dadaf794f207ebd94a42bf786f14bdcea95f8ec6 bugzilla: 46859
--------------------------------
commit d96f04d347e4011977abdbb4da5d8f303ebd26f8 upstream.
It has been observed that once per 300-1300 port openings the first transmitted byte is being corrupted on AM3352 ("v" written to FIFO appeared as "e" on the wire). It only happened if single byte has been transmitted right after port open, which means, DMA is not used for this transfer and the corruption never happened afterwards.
Therefore I've carefully re-read the MDR1 errata (link below), which says "when accessing the MDR1 registers that causes a dummy under-run condition that will freeze the UART in IrDA transmission. In UART mode, this may corrupt the transferred data". Strictly speaking, omap_8250_mdr1_errataset() performs a read access and if the value is the same as should be written, exits without errata-recommended FIFO reset.
A brief check of the serial_omap_mdr1_errataset() from the competing omap-serial driver showed it has no read access of MDR1. After removing the read access from omap_8250_mdr1_errataset() the data corruption never happened any more.
Link: https://www.ti.com/lit/er/sprz360i/sprz360i.pdf Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver") Cc: stable@vger.kernel.org Signed-off-by: Alexander Sverdlin alexander.sverdlin@gmail.com Link: https://lore.kernel.org/r/20201210055257.1053028-1-alexander.sverdlin@gmail.... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/8250/8250_omap.c | 5 ----- 1 file changed, 5 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 562087df7d33..0cc6d35a0815 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -184,11 +184,6 @@ static void omap_8250_mdr1_errataset(struct uart_8250_port *up, struct omap8250_priv *priv) { u8 timeout = 255; - u8 old_mdr1; - - old_mdr1 = serial_in(up, UART_OMAP_MDR1); - if (old_mdr1 == priv->mdr1) - return;
serial_out(up, UART_OMAP_MDR1, priv->mdr1); udelay(2);
For this series, Acked-by: Xie XiuQi xiexiuqi@huawei.com
-----邮件原件----- 发件人: chenjun (AM) 发送时间: 2020年12月23日 10:40 收件人: kernel@openeuler.org 抄送: Xiangrui (Euler) rui.xiang@huawei.com; Guohanjun (Hanjun Guo) guohanjun@huawei.com; Xiexiuqi xiexiuqi@huawei.com 主题: [PATCH OLK-5.10 00/16] Backport v5.10.2 LTS
*** BLURB HERE ***
Alan Stern (1): USB: legotower: fix logical error in recent commit
Alexander Sverdlin (1): serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access
Bui Quang Minh (1): USB: dummy-hcd: Fix uninitialized array use in init()
Hans de Goede (1): xhci-pci: Allow host runtime PM as default for Intel Alpine Ridge LP
Li Jun (1): xhci: Give USB2 ports time to enter U3 in bus suspend
Mika Westerberg (1): xhci-pci: Allow host runtime PM as default for Intel Maple Ridge xHCI
Oliver Neukum (2): USB: add RESET_RESUME quirk for Snapscan 1212 USB: UAS: introduce a quirk to set no_write_same
Peilin Ye (1): ptrace: Prevent kernel-infoleak in ptrace_get_syscall_info()
Steven Rostedt (VMware) (2): ktest.pl: If size of log is too big to email, email error message ktest.pl: Fix the logic for truncating the size of the log file for email
Takashi Iwai (3): ALSA: usb-audio: Fix potential out-of-bounds shift ALSA: usb-audio: Fix control 'access overflow' errors from chmap ALSA: pcm: oss: Fix potential out-of-bounds shift
Tejas Joglekar (1): usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK
Thomas Gleixner (1): USB: sisusbvga: Make console support depend on BROKEN
.../admin-guide/kernel-parameters.txt | 1 + drivers/tty/serial/8250/8250_omap.c | 5 ----- drivers/usb/core/quirks.c | 3 +++ drivers/usb/gadget/udc/dummy_hcd.c | 2 +- drivers/usb/host/xhci-hub.c | 4 ++++ drivers/usb/host/xhci-pci.c | 6 +++++- drivers/usb/host/xhci-plat.c | 3 +++ drivers/usb/host/xhci.h | 1 + drivers/usb/misc/legousbtower.c | 2 +- drivers/usb/misc/sisusbvga/Kconfig | 2 +- drivers/usb/storage/uas.c | 3 +++ drivers/usb/storage/unusual_uas.h | 7 +++++-- drivers/usb/storage/usb.c | 3 +++ include/linux/usb_usual.h | 2 ++ include/uapi/linux/ptrace.h | 3 ++- sound/core/oss/pcm_oss.c | 6 +++++- sound/usb/format.c | 2 ++ sound/usb/stream.c | 6 +++--- tools/testing/ktest/ktest.pl | 20 +++++++++++-------- 19 files changed, 57 insertions(+), 24 deletions(-)
-
Chen Jun -
Xiexiuqi