*** BLURB HERE ***
Yang Yingliang (3): irqchip/mbigen: rename register marcros irqchip/mbigen: add support for a MBIGEN generating SPIs dt-bindings/irqchip/mbigen: add example of MBIGEN generate SPIs
.../hisilicon,mbigen-v2.txt | 17 +++++++- drivers/irqchip/irq-mbigen.c | 42 +++++++++++++------ 2 files changed, 45 insertions(+), 14 deletions(-)
From: Yang Yingliang yangyingliang@huawei.com
hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8NULW CVE: N/A
-------------------------------------------------
A MBIGEN can also be used for generating SPIs, so let's rename register macros to make them more resonable.
The first 64-pins of MBIGEN is used by SPIs, so rename RESERVED_IRQ_PER_MBIGEN_CHIP to SPI_NUM_PER_MBIGEN_CHIP and change the comment for this marcro.
Signed-off-by: Yang Yingliang yangyingliang@huawei.com Reviewed-by: Hanjun Guo guohanjun@huawei.com Signed-off-by: zhangyi (F) yi.zhang@huawei.com Acked-by: Xie XiuQi xiexiuqi@huawei.com Signed-off-by: Chen Jun chenjun102@huawei.com conflict: drivers/irqchip/irq-mbigen.c Signed-off-by: Yuntao Liu liuyuntao12@huawei.com --- drivers/irqchip/irq-mbigen.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c index 5101a3fb11df..c0aabfee847b 100644 --- a/drivers/irqchip/irq-mbigen.c +++ b/drivers/irqchip/irq-mbigen.c @@ -19,14 +19,14 @@ /* Interrupt numbers per mbigen node supported */ #define IRQS_PER_MBIGEN_NODE 128
-/* 64 irqs (Pin0-pin63) are reserved for each mbigen chip */ -#define RESERVED_IRQ_PER_MBIGEN_CHIP 64 +/* 64 irqs (Pin0-pin63) are used for SPIs on each mbigen chip */ +#define SPI_NUM_PER_MBIGEN_CHIP 64
/* The maximum IRQ pin number of mbigen chip(start from 0) */ #define MAXIMUM_IRQ_PIN_NUM 1407
/* - * In mbigen vector register + * In mbigen lpi vector register * bit[21:12]: event id value * bit[11:0]: device id */ @@ -37,8 +37,7 @@ #define MBIGEN_NODE_OFFSET 0x1000
/* offset of vector register in mbigen node */ -#define REG_MBIGEN_VEC_OFFSET 0x200 - +#define REG_MBIGEN_LPI_VEC_OFFSET 0x200 /* * offset of clear register in mbigen node * This register is used to clear the status @@ -51,7 +50,7 @@ * This register is used to configure interrupt * trigger type */ -#define REG_MBIGEN_TYPE_OFFSET 0x0 +#define REG_MBIGEN_LPI_TYPE_OFFSET 0x0
/** * struct mbigen_device - holds the information of mbigen device. @@ -68,12 +67,12 @@ static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq) { unsigned int nid, pin;
- hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP; + hwirq -= SPI_NUM_PER_MBIGEN_CHIP; nid = hwirq / IRQS_PER_MBIGEN_NODE + 1; pin = hwirq % IRQS_PER_MBIGEN_NODE;
return pin * 4 + nid * MBIGEN_NODE_OFFSET - + REG_MBIGEN_VEC_OFFSET; + + REG_MBIGEN_LPI_VEC_OFFSET; }
static inline void get_mbigen_type_reg(irq_hw_number_t hwirq, @@ -81,7 +80,7 @@ static inline void get_mbigen_type_reg(irq_hw_number_t hwirq, { unsigned int nid, irq_ofst, ofst;
- hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP; + hwirq -= SPI_NUM_PER_MBIGEN_CHIP; nid = hwirq / IRQS_PER_MBIGEN_NODE + 1; irq_ofst = hwirq % IRQS_PER_MBIGEN_NODE;
@@ -89,7 +88,7 @@ static inline void get_mbigen_type_reg(irq_hw_number_t hwirq, ofst = irq_ofst / 32 * 4;
*addr = ofst + nid * MBIGEN_NODE_OFFSET - + REG_MBIGEN_TYPE_OFFSET; + + REG_MBIGEN_LPI_TYPE_OFFSET; }
static inline void get_mbigen_clear_reg(irq_hw_number_t hwirq, @@ -175,7 +174,7 @@ static int mbigen_domain_translate(struct irq_domain *d, return -EINVAL;
if ((fwspec->param[0] > MAXIMUM_IRQ_PIN_NUM) || - (fwspec->param[0] < RESERVED_IRQ_PER_MBIGEN_CHIP)) + (fwspec->param[0] < SPI_NUM_PER_MBIGEN_CHIP)) return -EINVAL; else *hwirq = fwspec->param[0];
From: Yang Yingliang yangyingliang@huawei.com
hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8NULW CVE: N/A
-------------------------------------------------
Now with 5052875 ("irqchip/gic-v3: Add support for Message Based Interrupts as an MSI controller"), we can support MBIGEN to generate message based SPIs by writing GICD_SETSPIR.
The first 64-pins of each MBIGEN chip is used to generate SPIs, and each MBIGEN chip has several MBIGEN nodes, every node has 128 pins for generating LPIs. The total pins are: 64(SPIs) + 128 * node_nr(LPIs). So we can translate the pin index in a unified way in mbigen_domain_translate().
Also Add TYPE and VEC registers that used by generating SPIs, the driver can access them when MBIGEN is used to generate SPIs.
Signed-off-by: Yang Yingliang yangyingliang@huawei.com Reviewed-by: Hanjun Guo guohanjun@huawei.com Signed-off-by: zhangyi (F) yi.zhang@huawei.com Acked-by: Xie XiuQi xiexiuqi@huawei.com Signed-off-by: Chen Jun chenjun102@huawei.com conflict: drivers/irqchip/irq-mbigen.c Signed-off-by: Yuntao Liu liuyuntao12@huawei.com --- drivers/irqchip/irq-mbigen.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-)
diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c index c0aabfee847b..ecb7f16a7c68 100644 --- a/drivers/irqchip/irq-mbigen.c +++ b/drivers/irqchip/irq-mbigen.c @@ -37,6 +37,7 @@ #define MBIGEN_NODE_OFFSET 0x1000
/* offset of vector register in mbigen node */ +#define REG_MBIGEN_SPI_VEC_OFFSET 0x500 #define REG_MBIGEN_LPI_VEC_OFFSET 0x200 /* * offset of clear register in mbigen node @@ -50,6 +51,7 @@ * This register is used to configure interrupt * trigger type */ +#define REG_MBIGEN_SPI_TYPE_OFFSET 0x400 #define REG_MBIGEN_LPI_TYPE_OFFSET 0x0
/** @@ -67,6 +69,9 @@ static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq) { unsigned int nid, pin;
+ if (hwirq < SPI_NUM_PER_MBIGEN_CHIP) + return (hwirq * 4 + REG_MBIGEN_SPI_VEC_OFFSET); + hwirq -= SPI_NUM_PER_MBIGEN_CHIP; nid = hwirq / IRQS_PER_MBIGEN_NODE + 1; pin = hwirq % IRQS_PER_MBIGEN_NODE; @@ -80,6 +85,13 @@ static inline void get_mbigen_type_reg(irq_hw_number_t hwirq, { unsigned int nid, irq_ofst, ofst;
+ if (hwirq < SPI_NUM_PER_MBIGEN_CHIP) { + *mask = 1 << (hwirq % 32); + ofst = hwirq / 32 * 4; + *addr = ofst + REG_MBIGEN_SPI_TYPE_OFFSET; + return; + } + hwirq -= SPI_NUM_PER_MBIGEN_CHIP; nid = hwirq / IRQS_PER_MBIGEN_NODE + 1; irq_ofst = hwirq % IRQS_PER_MBIGEN_NODE; @@ -151,8 +163,14 @@ static void mbigen_write_msg(struct msi_desc *desc, struct msi_msg *msg)
if (!msg->address_lo && !msg->address_hi) return; - + base += get_mbigen_vec_reg(d->hwirq); + + if (d->hwirq < SPI_NUM_PER_MBIGEN_CHIP) { + writel_relaxed(msg->data, base); + return; + } + val = readl_relaxed(base);
val &= ~(IRQ_EVENT_ID_MASK << IRQ_EVENT_ID_SHIFT); @@ -173,8 +191,7 @@ static int mbigen_domain_translate(struct irq_domain *d, if (fwspec->param_count != 2) return -EINVAL;
- if ((fwspec->param[0] > MAXIMUM_IRQ_PIN_NUM) || - (fwspec->param[0] < SPI_NUM_PER_MBIGEN_CHIP)) + if (fwspec->param[0] > MAXIMUM_IRQ_PIN_NUM) return -EINVAL; else *hwirq = fwspec->param[0];
From: Yang Yingliang yangyingliang@huawei.com
hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8NULW CVE: N/A
-------------------------------------------------
Now MBIGEN can support to generate SPIs by writing GICD_SETSPIR. Add dt example to help document.
Signed-off-by: Yang Yingliang yangyingliang@huawei.com Reviewed-by: Hanjun Guo guohanjun@huawei.com Signed-off-by: zhangyi (F) yi.zhang@huawei.com Acked-by: Xie XiuQi xiexiuqi@huawei.com Signed-off-by: Chen Jun chenjun102@huawei.com Signed-off-by: Yuntao Liu liuyuntao12@huawei.com --- .../hisilicon,mbigen-v2.txt | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt index a6813a071f15..298c033ed860 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt @@ -10,7 +10,7 @@ Hisilicon designed mbigen to collect and generate interrupt.
Non-pci devices can connect to mbigen and generate the -interrupt by writing ITS register. +interrupt by writing GICD or ITS register.
The mbigen chip and devices connect to mbigen have the following properties:
@@ -64,6 +64,13 @@ Examples: num-pins = <2>; #interrupt-cells = <2>; }; + + mbigen_spi_example:spi_example { + interrupt-controller; + msi-parent = <&gic>; + num-pins = <2>; + #interrupt-cells = <2>; + }; };
Devices connect to mbigen required properties: @@ -82,3 +89,11 @@ Examples: interrupts = <656 1>, <657 1>; }; + + spi_example: spi0@0 { + compatible = "spi,example"; + reg = <0 0 0 0>; + interrupt-parent = <&mbigen_spi_example>; + interrupts = <13 4>, + <14 4>; + };
反馈： 您发送到kernel@openeuler.org的补丁/补丁集，已成功转换为PR！ PR链接地址： https://gitee.com/openeuler/kernel/pulls/3437 邮件列表地址：https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/E...
FeedBack: The patch(es) which you have sent to kernel@openeuler.org mailing list has been converted to a pull request successfully! Pull request link: https://gitee.com/openeuler/kernel/pulls/3437 Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/E...
-
patchwork bot -
Yuntao Liu