From: Aleksandr Loktionov aleksandr.loktionov@intel.com
mainline inclusion from mainline-v6.12-rc7 commit f30490e9695ef7da3d0899c6a0293cc7cd373567 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IB5KRJ CVE: CVE-2024-53088
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i...
--------------------------------
Fix a race condition in the i40e driver that leads to MAC/VLAN filters becoming corrupted and leaking. Address the issue that occurs under heavy load when multiple threads are concurrently modifying MAC/VLAN filters by setting mac and port VLAN.
1. Thread T0 allocates a filter in i40e_add_filter() within i40e_ndo_set_vf_port_vlan(). 2. Thread T1 concurrently frees the filter in __i40e_del_filter() within i40e_ndo_set_vf_mac(). 3. Subsequently, i40e_service_task() calls i40e_sync_vsi_filters(), which refers to the already freed filter memory, causing corruption.
Reproduction steps: 1. Spawn multiple VFs. 2. Apply a concurrent heavy load by running parallel operations to change MAC addresses on the VFs and change port VLANs on the host. 3. Observe errors in dmesg: "Error I40E_AQ_RC_ENOSPC adding RX filters on VF XX, please set promiscuous on manually for VF XX".
Exact code for stable reproduction Intel can't open-source now.
The fix involves implementing a new intermediate filter state, I40E_FILTER_NEW_SYNC, for the time when a filter is on a tmp_add_list. These filters cannot be deleted from the hash list directly but must be removed using the full process.
Fixes: 278e7d0b9d68 ("i40e: store MAC/VLAN filters in a hash with the MAC Address as key") Signed-off-by: Aleksandr Loktionov aleksandr.loktionov@intel.com Tested-by: Pucha Himasekhar Reddy himasekharx.reddy.pucha@intel.com (A Contingent worker at Intel) Reviewed-by: Michal Schmidt mschmidt@redhat.com Tested-by: Michal Schmidt mschmidt@redhat.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Conflicts: drivers/net/ethernet/intel/i40e/i40e_main.c [c87c938f62d8 ("i40e: Add VF VLAN pruning") and 5180ff1364bc ("i40e: use int for i40e_status") not merged] Signed-off-by: Zhang Changzhong zhangchangzhong@huawei.com --- drivers/net/ethernet/intel/i40e/i40e.h | 1 + drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 1 + drivers/net/ethernet/intel/i40e/i40e_main.c | 10 ++++++++-- 3 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h index dd630b6..1641145 100644 --- a/drivers/net/ethernet/intel/i40e/i40e.h +++ b/drivers/net/ethernet/intel/i40e/i40e.h @@ -681,6 +681,7 @@ enum i40e_filter_state { I40E_FILTER_ACTIVE, /* Added to switch by FW */ I40E_FILTER_FAILED, /* Rejected by FW */ I40E_FILTER_REMOVE, /* To be removed */ + I40E_FILTER_NEW_SYNC, /* New, not sent yet, is in i40e_sync_vsi_filters() */ /* There is no 'removed' state; the filter struct is freed */ }; struct i40e_mac_filter { diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c index 8bcf590..66eacbf 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c +++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c @@ -105,6 +105,7 @@ static char *i40e_filter_state_string[] = { "ACTIVE", "FAILED", "REMOVE", + "NEW_SYNC", };
/** diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 35a903f..00b6028 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -1232,6 +1232,7 @@ int i40e_count_filters(struct i40e_vsi *vsi)
hash_for_each_safe(vsi->mac_filter_hash, bkt, h, f, hlist) { if (f->state == I40E_FILTER_NEW || + f->state == I40E_FILTER_NEW_SYNC || f->state == I40E_FILTER_ACTIVE) ++cnt; } @@ -1418,6 +1419,8 @@ static int i40e_correct_mac_vlan_filters(struct i40e_vsi *vsi,
new->f = add_head; new->state = add_head->state; + if (add_head->state == I40E_FILTER_NEW) + add_head->state = I40E_FILTER_NEW_SYNC;
/* Add the new filter to the tmp list */ hlist_add_head(&new->hlist, tmp_add_list); @@ -2307,7 +2310,8 @@ static i40e_status i40e_aqc_broadcast_filter(struct i40e_vsi *vsi, const char *vsi_name, struct i40e_mac_filter *f) { - bool enable = f->state == I40E_FILTER_NEW; + bool enable = f->state == I40E_FILTER_NEW || + f->state == I40E_FILTER_NEW_SYNC; struct i40e_hw *hw = &vsi->back->hw; i40e_status aq_ret;
@@ -2481,6 +2485,7 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi)
/* Add it to the hash list */ hlist_add_head(&new->hlist, &tmp_add_list); + f->state = I40E_FILTER_NEW_SYNC; }
/* Count the number of active (current and new) VLAN @@ -2628,7 +2633,8 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) spin_lock_bh(&vsi->mac_filter_hash_lock); hlist_for_each_entry_safe(new, h, &tmp_add_list, hlist) { /* Only update the state if we're still NEW */ - if (new->f->state == I40E_FILTER_NEW) + if (new->f->state == I40E_FILTER_NEW || + new->f->state == I40E_FILTER_NEW_SYNC) new->f->state = new->state; hlist_del(&new->hlist); netdev_hw_addr_refcnt(new->f, vsi->netdev, -1);
反馈: 您发送到kernel@openeuler.org的补丁/补丁集,转换为PR失败! 邮件列表地址:https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/G... 失败原因:同步源码仓代码到fork仓失败 建议解决方法:请稍等,机器人会在下一次任务重新执行
FeedBack: The patch(es) which you have sent to kernel@openeuler.org has been converted to PR failed! Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/G... Failed Reason: sync origin kernel's codes to the fork repository failed Suggest Solution: please wait, the bot will retry in the next interval
反馈: 您发送到kernel@openeuler.org的补丁/补丁集,转换为PR失败! 邮件列表地址:https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/G... 失败原因:同步源码仓代码到fork仓失败 建议解决方法:请稍等,机器人会在下一次任务重新执行
FeedBack: The patch(es) which you have sent to kernel@openeuler.org has been converted to PR failed! Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/G... Failed Reason: sync origin kernel's codes to the fork repository failed Suggest Solution: please wait, the bot will retry in the next interval
反馈: 您发送到kernel@openeuler.org的补丁/补丁集,转换为PR失败! 邮件列表地址:https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/G... 失败原因:同步源码仓代码到fork仓失败 建议解决方法:请稍等,机器人会在下一次任务重新执行
FeedBack: The patch(es) which you have sent to kernel@openeuler.org has been converted to PR failed! Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/G... Failed Reason: sync origin kernel's codes to the fork repository failed Suggest Solution: please wait, the bot will retry in the next interval
反馈: 您发送到kernel@openeuler.org的补丁/补丁集,转换为PR失败! 邮件列表地址:https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/G... 失败原因:同步源码仓代码到fork仓失败 建议解决方法:请稍等,机器人会在下一次任务重新执行
FeedBack: The patch(es) which you have sent to kernel@openeuler.org has been converted to PR failed! Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/G... Failed Reason: sync origin kernel's codes to the fork repository failed Suggest Solution: please wait, the bot will retry in the next interval
反馈: 您发送到kernel@openeuler.org的补丁/补丁集,转换为PR失败! 邮件列表地址:https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/G... 失败原因:同步源码仓代码到fork仓失败 建议解决方法:请稍等,机器人会在下一次任务重新执行
FeedBack: The patch(es) which you have sent to kernel@openeuler.org has been converted to PR failed! Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/G... Failed Reason: sync origin kernel's codes to the fork repository failed Suggest Solution: please wait, the bot will retry in the next interval