From: Thierry Reding treding@nvidia.com

stable inclusion from stable-5.10.3 commit eadec7f5374ef01fa4556c24dfc90769ebaefd5e bugzilla: 46871

--------------------------------

commit c9f64d1fc101c64ea2be1b2e562b4395127befc9 upstream.

When dumping the name and NTP servers advertised by DHCP, a blank line is emitted if either of the lists is empty. This can lead to confusing issues such as the blank line getting flagged as warning. This happens because the blank line is the result of pr_cont("\n") and that may see its level corrupted by some other driver concurrently writing to the console.

Fix this by making sure that the terminating newline is only emitted if at least one entry in the lists was printed before.

Reported-by: Jon Hunter jonathanh@nvidia.com Signed-off-by: Thierry Reding treding@nvidia.com Link: https://lore.kernel.org/r/20201110073757.1284594-1-thierry.reding@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- net/ipv4/ipconfig.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c index 561f15b5a944..3cd13e1bc6a7 100644 --- a/net/ipv4/ipconfig.c +++ b/net/ipv4/ipconfig.c @@ -1441,7 +1441,7 @@ static int __init ip_auto_config(void) int retries = CONF_OPEN_RETRIES; #endif int err; - unsigned int i; + unsigned int i, count;

/* Initialise all name servers and NTP servers to NONE (but only if the * "ip=" or "nfsaddrs=" kernel command line parameters weren't decoded, @@ -1575,7 +1575,7 @@ static int __init ip_auto_config(void) if (ic_dev_mtu) pr_cont(", mtu=%d", ic_dev_mtu); /* Name servers (if any): */ - for (i = 0; i < CONF_NAMESERVERS_MAX; i++) { + for (i = 0, count = 0; i < CONF_NAMESERVERS_MAX; i++) { if (ic_nameservers[i] != NONE) { if (i == 0) pr_info(" nameserver%u=%pI4", @@ -1583,12 +1583,14 @@ static int __init ip_auto_config(void) else pr_cont(", nameserver%u=%pI4", i, &ic_nameservers[i]); + + count++; } - if (i + 1 == CONF_NAMESERVERS_MAX) + if ((i + 1 == CONF_NAMESERVERS_MAX) && count > 0) pr_cont("\n"); } /* NTP servers (if any): */ - for (i = 0; i < CONF_NTP_SERVERS_MAX; i++) { + for (i = 0, count = 0; i < CONF_NTP_SERVERS_MAX; i++) { if (ic_ntp_servers[i] != NONE) { if (i == 0) pr_info(" ntpserver%u=%pI4", @@ -1596,8 +1598,10 @@ static int __init ip_auto_config(void) else pr_cont(", ntpserver%u=%pI4", i, &ic_ntp_servers[i]); + + count++; } - if (i + 1 == CONF_NTP_SERVERS_MAX) + if ((i + 1 == CONF_NTP_SERVERS_MAX) && count > 0) pr_cont("\n"); } #endif /* !SILENT */

From: Artem Labazov 123321artyom@gmail.com

stable inclusion from stable-5.10.3 commit 5f5240c03aa39b18034ec2b6ecada486ab0d4077 bugzilla: 46871

--------------------------------

commit 9eb78c25327548b905598975aa3ded4ef244b94a upstream.

The table for Unicode upcase conversion requires an order-5 allocation, which may fail on a highly-fragmented system:

pool-udisksd: page allocation failure: order:5, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null), cpuset=/,mems_allowed=0 CPU: 4 PID: 3756880 Comm: pool-udisksd Tainted: G U 5.8.10-200.fc32.x86_64 #1 Hardware name: Dell Inc. XPS 13 9360/0PVG6D, BIOS 2.13.0 11/14/2019 Call Trace: dump_stack+0x6b/0x88 warn_alloc.cold+0x75/0xd9 ? _cond_resched+0x16/0x40 ? __alloc_pages_direct_compact+0x144/0x150 __alloc_pages_slowpath.constprop.0+0xcfa/0xd30 ? __schedule+0x28a/0x840 ? __wait_on_bit_lock+0x92/0xa0 __alloc_pages_nodemask+0x2df/0x320 kmalloc_order+0x1b/0x80 kmalloc_order_trace+0x1d/0xa0 exfat_create_upcase_table+0x115/0x390 [exfat] exfat_fill_super+0x3ef/0x7f0 [exfat] ? sget_fc+0x1d0/0x240 ? exfat_init_fs_context+0x120/0x120 [exfat] get_tree_bdev+0x15c/0x250 vfs_get_tree+0x25/0xb0 do_mount+0x7c3/0xaf0 ? copy_mount_options+0xab/0x180 __x64_sys_mount+0x8e/0xd0 do_syscall_64+0x4d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Make the driver use kvcalloc() to eliminate the issue.

Fixes: 370e812b3ec1 ("exfat: add nls operations") Cc: stable@vger.kernel.org #v5.7+ Signed-off-by: Artem Labazov 123321artyom@gmail.com Signed-off-by: Namjae Jeon namjae.jeon@samsung.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- fs/exfat/nls.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/exfat/nls.c b/fs/exfat/nls.c index 675d0e7058c5..314d5407a1be 100644 --- a/fs/exfat/nls.c +++ b/fs/exfat/nls.c @@ -659,7 +659,7 @@ static int exfat_load_upcase_table(struct super_block *sb, unsigned char skip = false; unsigned short *upcase_table;

- upcase_table = kcalloc(UTBL_COUNT, sizeof(unsigned short), GFP_KERNEL); + upcase_table = kvcalloc(UTBL_COUNT, sizeof(unsigned short), GFP_KERNEL); if (!upcase_table) return -ENOMEM;

@@ -715,7 +715,7 @@ static int exfat_load_default_upcase_table(struct super_block *sb) unsigned short uni = 0, *upcase_table; unsigned int index = 0;

- upcase_table = kcalloc(UTBL_COUNT, sizeof(unsigned short), GFP_KERNEL); + upcase_table = kvcalloc(UTBL_COUNT, sizeof(unsigned short), GFP_KERNEL); if (!upcase_table) return -ENOMEM;

@@ -803,5 +803,5 @@ int exfat_create_upcase_table(struct super_block *sb)

void exfat_free_upcase_table(struct exfat_sb_info *sbi) { - kfree(sbi->vol_utbl); + kvfree(sbi->vol_utbl); }

From: Dan Carpenter dan.carpenter@oracle.com

stable inclusion from stable-5.10.3 commit 4cfc27cb56208be233915bb524198a5f1da4679a bugzilla: 46871

--------------------------------

commit 3f6f6343a29d9ea7429306b83b18e66dc1331d5c upstream.

This code is using the wrong sizeof() so it does not allocate enough memory. It allocates 32 bytes but 72 are required. That will lead to memory corruption.

Fixes: ae07809255d3 ("usb: mtu3: add debugfs interface files") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Link: https://lore.kernel.org/r/X8ikqc4Mo2/0G72j@mwanda Cc: stable stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Chen Jun chenjun102@huawei.com --- drivers/usb/mtu3/mtu3_debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/mtu3/mtu3_debugfs.c b/drivers/usb/mtu3/mtu3_debugfs.c index fdeade6254ae..7537bfd651af 100644 --- a/drivers/usb/mtu3/mtu3_debugfs.c +++ b/drivers/usb/mtu3/mtu3_debugfs.c @@ -127,7 +127,7 @@ static void mtu3_debugfs_regset(struct mtu3 *mtu, void __iomem *base, struct debugfs_regset32 *regset; struct mtu3_regset *mregs;

- mregs = devm_kzalloc(mtu->dev, sizeof(*regset), GFP_KERNEL); + mregs = devm_kzalloc(mtu->dev, sizeof(*mregs), GFP_KERNEL); if (!mregs) return;

From: "taehyun.cho" taehyun.cho@samsung.com

stable inclusion from stable-5.10.3 commit 798be9a2f9d745b578044eb519c5bca1ec745150 bugzilla: 46871

--------------------------------

commit 3ee05c20656782387aa9eb010fdb9bb16982ac3f upstream.

Setup the SuperSpeed Plus descriptors for f_acm. This allows the gadget to work properly without crashing at SuperSpeed rates.

Cc: Felipe Balbi balbi@kernel.org Cc: stable stable@vger.kernel.org Signed-off-by: taehyun.cho taehyun.cho@samsung.com Signed-off-by: Will McVicker willmcvicker@google.com Reviewed-by: Peter Chen peter.chen@nxp.com Link: https://lore.kernel.org/r/20201127140559.381351-3-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- drivers/usb/gadget/function/f_acm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/function/f_acm.c b/drivers/usb/gadget/function/f_acm.c index 46647bfac2ef..349945e064bb 100644 --- a/drivers/usb/gadget/function/f_acm.c +++ b/drivers/usb/gadget/function/f_acm.c @@ -686,7 +686,7 @@ acm_bind(struct usb_configuration *c, struct usb_function *f) acm_ss_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;

status = usb_assign_descriptors(f, acm_fs_function, acm_hs_function, - acm_ss_function, NULL); + acm_ss_function, acm_ss_function); if (status) goto fail;

From: Jack Pham jackp@codeaurora.org

stable inclusion from stable-5.10.3 commit 4ef3fc712c7702859553e33f9197d70beb3f31c8 bugzilla: 46871

--------------------------------

commit a353397b0d5dfa3c99b372505db3378fc919c6c6 upstream.

In many cases a function that supports SuperSpeed can very well operate in SuperSpeedPlus, if a gadget controller supports it, as the endpoint descriptors (and companion descriptors) are generally identical and can be re-used. This is true for two commonly used functions: Android's ADB and MTP. So we can simply assign the usb_function's ssp_descriptors array to point to its ss_descriptors, if available. Similarly, we need to allow an epfile's ioctl for FUNCTIONFS_ENDPOINT_DESC to correctly return the corresponding SuperSpeed endpoint descriptor in case the connected speed is SuperSpeedPlus as well.

The only exception is if a function wants to implement an Isochronous endpoint capable of transferring more than 48KB per service interval when operating at greater than USB 3.1 Gen1 speed, in which case it would require an additional SuperSpeedPlus Isochronous Endpoint Companion descriptor to be returned as part of the Configuration Descriptor. Support for that would need to be separately added to the userspace-facing FunctionFS API which may not be a trivial task--likely a new descriptor format (v3?) may need to be devised to allow for separate SS and SSP descriptors to be supplied.

Signed-off-by: Jack Pham jackp@codeaurora.org Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20201027230731.9073-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- drivers/usb/gadget/function/f_fs.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index c727cb5de871..f3443347874d 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -1328,6 +1328,7 @@ static long ffs_epfile_ioctl(struct file *file, unsigned code,

switch (epfile->ffs->gadget->speed) { case USB_SPEED_SUPER: + case USB_SPEED_SUPER_PLUS: desc_idx = 2; break; case USB_SPEED_HIGH: @@ -3174,7 +3175,8 @@ static int _ffs_func_bind(struct usb_configuration *c, }

if (likely(super)) { - func->function.ss_descriptors = vla_ptr(vlabuf, d, ss_descs); + func->function.ss_descriptors = func->function.ssp_descriptors = + vla_ptr(vlabuf, d, ss_descs); ss_len = ffs_do_descs(ffs->ss_descs_count, vla_ptr(vlabuf, d, raw_descs) + fs_len + hs_len, d_raw_descs__sz - fs_len - hs_len, @@ -3584,6 +3586,7 @@ static void ffs_func_unbind(struct usb_configuration *c, func->function.fs_descriptors = NULL; func->function.hs_descriptors = NULL; func->function.ss_descriptors = NULL; + func->function.ssp_descriptors = NULL; func->interfaces_nums = NULL;

ffs_event_add(ffs, FUNCTIONFS_UNBIND);

From: Fabio Estevam festevam@gmail.com

stable inclusion from stable-5.10.3 commit 39fb7424d4edea5080b3531cfbdb80fac5f68a56 bugzilla: 46871

--------------------------------

commit c7721e15f434920145c376e8fe77e1c079fc3726 upstream.

According to the i.MX6UL Errata document: https://www.nxp.com/docs/en/errata/IMX6ULCE.pdf

ERR007881 also affects i.MX6UL, so pass the CI_HDRC_DISABLE_DEVICE_STREAMING flag to workaround the issue.

Fixes: 52fe568e5d71 ("usb: chipidea: imx: add imx6ul usb support") Cc: stable@vger.kernel.org Signed-off-by: Fabio Estevam festevam@gmail.com Signed-off-by: Peter Chen peter.chen@nxp.com Link: https://lore.kernel.org/r/20201207020909.22483-2-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- drivers/usb/chipidea/ci_hdrc_imx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index 25c65accf089..5e07a0a86d11 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -57,7 +57,8 @@ static const struct ci_hdrc_imx_platform_flag imx6sx_usb_data = {

static const struct ci_hdrc_imx_platform_flag imx6ul_usb_data = { .flags = CI_HDRC_SUPPORTS_RUNTIME_PM | - CI_HDRC_TURN_VBUS_EARLY_ON, + CI_HDRC_TURN_VBUS_EARLY_ON | + CI_HDRC_DISABLE_DEVICE_STREAMING, };

static const struct ci_hdrc_imx_platform_flag imx7d_usb_data = {

From: Krzysztof Kozlowski krzk@kernel.org

stable inclusion from stable-5.10.3 commit 8ed259869637c61dd95ad2d6aba98cf39915d348 bugzilla: 46871

--------------------------------

commit 3d992fd8f4e0f09c980726308d2f2725587b32d6 upstream.

The VBUS control (PWREN) and over-current pins of USB 3.0 DWC3 controllers are on Exynos5410 regular GPIOs. This is different than for example on Exynos5422 where these are special ETC pins with proper reset values (pulls, functions).

Therefore these pins should be configured to enable proper USB 3.0 peripheral and host modes. This also fixes over-current warning:

[ 6.024658] usb usb4-port1: over-current condition [ 6.028271] usb usb3-port1: over-current condition

Fixes: cb0896562228 ("ARM: dts: exynos: Add USB to Exynos5410") Signed-off-by: Krzysztof Kozlowski krzk@kernel.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201015182044.480562-2-krzk@kernel.org Tested-by: Gabriel Ribba Esteva gabriel.ribbae@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 28 +++++++++++++++++++++++ arch/arm/boot/dts/exynos5410.dtsi | 4 ++++ 2 files changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi index e5d0a2a4f648..d0aa18443a69 100644 --- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi @@ -560,6 +560,34 @@ gpk3: gpk3 { interrupt-controller; #interrupt-cells = <2>; }; + + usb3_1_oc: usb3-1-oc { + samsung,pins = "gpk2-4", "gpk2-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + usb3_1_vbusctrl: usb3-1-vbusctrl { + samsung,pins = "gpk2-6", "gpk2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + usb3_0_oc: usb3-0-oc { + samsung,pins = "gpk3-0", "gpk3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + usb3_0_vbusctrl: usb3-0-vbusctrl { + samsung,pins = "gpk3-2", "gpk3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; };

&pinctrl_2 { diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 60a87684b1af..584ce62361b1 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -390,6 +390,8 @@ &trng { &usbdrd3_0 { clocks = <&clock CLK_USBD300>; clock-names = "usbdrd30"; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_0_oc>, <&usb3_0_vbusctrl>; };

&usbdrd_phy0 { @@ -401,6 +403,8 @@ &usbdrd_phy0 { &usbdrd3_1 { clocks = <&clock CLK_USBD301>; clock-names = "usbdrd30"; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_1_oc>, <&usb3_1_vbusctrl>; };

&usbdrd_dwc3_1 {

From: Sai Prakash Ranjan saiprakash.ranjan@codeaurora.org

stable inclusion from stable-5.10.3 commit 8c5c48b60caa8bb18f77b16075329d875cfd16a6 bugzilla: 46871

--------------------------------

commit 868663dd5d69fef05bfb004f91da5c30e9b93461 upstream.

There was a report of NULL pointer dereference in ETF enable path for perf CS mode with PID monitoring. It is almost 100% reproducible when the process to monitor is something very active such as chrome and with ETF as the sink and not ETR. Currently in a bid to find the pid, the owner is dereferenced via task_pid_nr() call in tmc_enable_etf_sink_perf() and with owner being NULL, we get a NULL pointer dereference.

Looking at the ETR and other places in the kernel, ETF and the ETB are the only places trying to dereference the task(owner) in tmc_enable_etf_sink_perf() which is also called from the sched_in path as in the call trace. Owner(task) is NULL even in the case of ETR in tmc_enable_etr_sink_perf(), but since we cache the PID in alloc_buffer() callback and it is done as part of etm_setup_aux() when allocating buffer for ETR sink, we never dereference this NULL pointer and we are safe. So lets do the same thing with ETF and cache the PID to which the cs_buffer belongs in tmc_alloc_etf_buffer() as done for ETR. This will also remove the unnecessary function calls(task_pid_nr()) since we are caching the PID.

Easily reproducible running below:

perf record -e cs_etm/@tmc_etf0/ -N -p <pid>

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000548 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 <snip>... Call trace: tmc_enable_etf_sink+0xe4/0x280 coresight_enable_path+0x168/0x1fc etm_event_start+0x8c/0xf8 etm_event_add+0x38/0x54 event_sched_in+0x194/0x2ac group_sched_in+0x54/0x12c flexible_sched_in+0xd8/0x120 visit_groups_merge+0x100/0x16c ctx_flexible_sched_in+0x50/0x74 ctx_sched_in+0xa4/0xa8 perf_event_sched_in+0x60/0x6c perf_event_context_sched_in+0x98/0xe0 __perf_event_task_sched_in+0x5c/0xd8 finish_task_switch+0x184/0x1cc schedule_tail+0x20/0xec ret_from_fork+0x4/0x18

Fixes: 880af782c6e8 ("coresight: tmc-etf: Add support for CPU-wide trace scenarios") Cc: stable@vger.kernel.org Signed-off-by: Sai Prakash Ranjan saiprakash.ranjan@codeaurora.org Signed-off-by: Mathieu Poirier mathieu.poirier@linaro.org Link: https://lore.kernel.org/r/20201127175256.1092685-10-mathieu.poirier@linaro.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- drivers/hwtracing/coresight/coresight-priv.h | 2 ++ drivers/hwtracing/coresight/coresight-tmc-etf.c | 4 +++- 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h index 65a29293b6cb..f5f654ea2994 100644 --- a/drivers/hwtracing/coresight/coresight-priv.h +++ b/drivers/hwtracing/coresight/coresight-priv.h @@ -87,6 +87,7 @@ enum cs_mode { * struct cs_buffer - keep track of a recording session' specifics * @cur: index of the current buffer * @nr_pages: max number of pages granted to us + * @pid: PID this cs_buffer belongs to * @offset: offset within the current buffer * @data_size: how much we collected in this run * @snapshot: is this run in snapshot mode @@ -95,6 +96,7 @@ enum cs_mode { struct cs_buffers { unsigned int cur; unsigned int nr_pages; + pid_t pid; unsigned long offset; local_t data_size; bool snapshot; diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c index 44402d413ebb..989d965f3d90 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etf.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c @@ -227,6 +227,7 @@ static int tmc_enable_etf_sink_perf(struct coresight_device *csdev, void *data) unsigned long flags; struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); struct perf_output_handle *handle = data; + struct cs_buffers *buf = etm_perf_sink_config(handle);

spin_lock_irqsave(&drvdata->spinlock, flags); do { @@ -243,7 +244,7 @@ static int tmc_enable_etf_sink_perf(struct coresight_device *csdev, void *data) }

/* Get a handle on the pid of the process to monitor */ - pid = task_pid_nr(handle->event->owner); + pid = buf->pid;

if (drvdata->pid != -1 && drvdata->pid != pid) { ret = -EBUSY; @@ -399,6 +400,7 @@ static void *tmc_alloc_etf_buffer(struct coresight_device *csdev, if (!buf) return NULL;

+ buf->pid = task_pid_nr(event->owner); buf->snapshot = overwrite; buf->nr_pages = nr_pages; buf->data_pages = pages;

From: Suzuki K Poulose suzuki.poulose@arm.com

stable inclusion from stable-5.10.3 commit cda539d024c85b80000d0bc037c65eaf034890f0 bugzilla: 46871

--------------------------------

commit 83be0b84fe846edf0c722fefe225482d5f0d7395 upstream.

When the ETR is used in perf mode with a larger buffer (configured via sysfs or the default size of 1M) than the perf aux buffer size, we end up inserting the barrier packet at the wrong offset, while moving the offset forward. i.e, instead of the "new moved offset", we insert it at the current hardware buffer offset. These packets will not be visible as they are never copied and could lead to corruption in the trace decoding side, as the decoder is not aware that it needs to reset the decoding.

Fixes: ec13c78d7b45 ("coresight: tmc-etr: Add barrier packets when moving offset forward") Cc: Mathieu Poirier mathieu.poirier@linaro.org Cc: stable@vger.kernel.org Reported-by: Al Grant al.grant@arm.com Tested-by: Mike Leach mike.leach@arm.com Signed-off-by: Suzuki K Poulose suzuki.poulose@arm.com Signed-off-by: Mathieu Poirier mathieu.poirier@linaro.org Link: https://lore.kernel.org/r/20201208182651.1597945-2-mathieu.poirier@linaro.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- drivers/hwtracing/coresight/coresight-tmc-etr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c index 7086c431e170..3309b1344ffc 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etr.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c @@ -1552,7 +1552,7 @@ tmc_update_etr_buffer(struct coresight_device *csdev,

/* Insert barrier packets at the beginning, if there was an overflow */ if (lost) - tmc_etr_buf_insert_barrier_packet(etr_buf, etr_buf->offset); + tmc_etr_buf_insert_barrier_packet(etr_buf, offset); tmc_etr_sync_perf_buffer(etr_perf, offset, size);

/*

From: Sai Prakash Ranjan saiprakash.ranjan@codeaurora.org

stable inclusion from stable-5.10.3 commit 99203d72820585762c0420af660448416e564f24 bugzilla: 46871

--------------------------------

commit ac0f82b1b4956e348a6b2de8104308144ffb6ef7 upstream.

There is a bug on the systems supporting to skip power up (qcom,skip-power-up) where setting LPOVERRIDE bit(low-power state override behaviour) will result in CPU hangs/lockups even on the implementations which supports it. So skip setting the LPOVERRIDE bit for such platforms.

Fixes: 02510a5aa78d ("coresight: etm4x: Add support to skip trace unit power up") Cc: stable@vger.kernel.org Reviewed-by: Suzuki K Poulose suzuki.poulose@arm.com Signed-off-by: Sai Prakash Ranjan saiprakash.ranjan@codeaurora.org Signed-off-by: Mathieu Poirier mathieu.poirier@linaro.org Link: https://lore.kernel.org/r/20201127175256.1092685-2-mathieu.poirier@linaro.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- drivers/hwtracing/coresight/coresight-etm4x-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index abd706b216ac..6096d7abf80d 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -779,7 +779,7 @@ static void etm4_init_arch_data(void *info) * LPOVERRIDE, bit[23] implementation supports * low-power state override */ - if (BMVAL(etmidr5, 23, 23)) + if (BMVAL(etmidr5, 23, 23) && (!drvdata->skip_power_up)) drvdata->lpoverride = true; else drvdata->lpoverride = false;

From: Suzuki K Poulose suzuki.poulose@arm.com

stable inclusion from stable-5.10.3 commit c3ac42626ea92118eeaa4c833e197b96adc83f9b bugzilla: 46871

--------------------------------

commit f2603b22e3d2dcffd8b0736e5c68df497af6bc84 upstream.

The TRCCIDCTLR1 is only implemented if TRCIDR4.NUMCIDC > 4. Don't touch the register if it is not implemented.

Cc: stable@vger.kernel.org Cc: Mathieu Poirier mathieu.poirier@linaro.org Cc: Mike Leach mike.leach@linaro.org Signed-off-by: Suzuki K Poulose suzuki.poulose@arm.com Signed-off-by: Mathieu Poirier mathieu.poirier@linaro.org Link: https://lore.kernel.org/r/20201127175256.1092685-5-mathieu.poirier@linaro.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- drivers/hwtracing/coresight/coresight-etm4x-core.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index e67365d1ce28..af0ab2f44865 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -187,7 +187,8 @@ static int etm4_enable_hw(struct etmv4_drvdata *drvdata) writeq_relaxed(config->ctxid_pid[i], drvdata->base + TRCCIDCVRn(i)); writel_relaxed(config->ctxid_mask0, drvdata->base + TRCCIDCCTLR0); - writel_relaxed(config->ctxid_mask1, drvdata->base + TRCCIDCCTLR1); + if (drvdata->numcidc > 4) + writel_relaxed(config->ctxid_mask1, drvdata->base + TRCCIDCCTLR1);

for (i = 0; i < drvdata->numvmidc; i++) writeq_relaxed(config->vmid_val[i], @@ -1241,7 +1242,8 @@ static int etm4_cpu_save(struct etmv4_drvdata *drvdata) state->trcvmidcvr[i] = readq(drvdata->base + TRCVMIDCVRn(i));

state->trccidcctlr0 = readl(drvdata->base + TRCCIDCCTLR0); - state->trccidcctlr1 = readl(drvdata->base + TRCCIDCCTLR1); + if (drvdata->numcidc > 4) + state->trccidcctlr1 = readl(drvdata->base + TRCCIDCCTLR1);

state->trcvmidcctlr0 = readl(drvdata->base + TRCVMIDCCTLR0); if (drvdata->numvmidc > 4) @@ -1352,7 +1354,8 @@ static void etm4_cpu_restore(struct etmv4_drvdata *drvdata) drvdata->base + TRCVMIDCVRn(i));

writel_relaxed(state->trccidcctlr0, drvdata->base + TRCCIDCCTLR0); - writel_relaxed(state->trccidcctlr1, drvdata->base + TRCCIDCCTLR1); + if (drvdata->numcidc > 4) + writel_relaxed(state->trccidcctlr1, drvdata->base + TRCCIDCCTLR1);

writel_relaxed(state->trcvmidcctlr0, drvdata->base + TRCVMIDCCTLR0); if (drvdata->numvmidc > 4)

From: Suzuki K Poulose suzuki.poulose@arm.com

stable inclusion from stable-5.10.3 commit 1384d0cba681faa44d1725f1f8277b79e2debb7f bugzilla: 46871

--------------------------------

commit 60c519c5d3629c21ba356782434d5b612d312de4 upstream.

TRCVIPCSSCTLR is not present if the TRCIDR4.NUMPC > 0. Thus we should only access the register if it is present, preventing any undesired behavior.

Cc: stable@vger.kernel.org Signed-off-by: Suzuki K Poulose suzuki.poulose@arm.com Signed-off-by: Mathieu Poirier mathieu.poirier@linaro.org Link: https://lore.kernel.org/r/20201127175256.1092685-8-mathieu.poirier@linaro.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- drivers/hwtracing/coresight/coresight-etm4x-core.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index 9e2090fbe396..e516e5b879e3 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -141,8 +141,9 @@ static int etm4_enable_hw(struct etmv4_drvdata *drvdata) writel_relaxed(config->viiectlr, drvdata->base + TRCVIIECTLR); writel_relaxed(config->vissctlr, drvdata->base + TRCVISSCTLR); - writel_relaxed(config->vipcssctlr, - drvdata->base + TRCVIPCSSCTLR); + if (drvdata->nr_pe_cmp) + writel_relaxed(config->vipcssctlr, + drvdata->base + TRCVIPCSSCTLR); for (i = 0; i < drvdata->nrseqstate - 1; i++) writel_relaxed(config->seq_ctrl[i], drvdata->base + TRCSEQEVRn(i)); @@ -1197,7 +1198,8 @@ static int etm4_cpu_save(struct etmv4_drvdata *drvdata) state->trcvictlr = readl(drvdata->base + TRCVICTLR); state->trcviiectlr = readl(drvdata->base + TRCVIIECTLR); state->trcvissctlr = readl(drvdata->base + TRCVISSCTLR); - state->trcvipcssctlr = readl(drvdata->base + TRCVIPCSSCTLR); + if (drvdata->nr_pe_cmp) + state->trcvipcssctlr = readl(drvdata->base + TRCVIPCSSCTLR); state->trcvdctlr = readl(drvdata->base + TRCVDCTLR); state->trcvdsacctlr = readl(drvdata->base + TRCVDSACCTLR); state->trcvdarcctlr = readl(drvdata->base + TRCVDARCCTLR); @@ -1305,7 +1307,8 @@ static void etm4_cpu_restore(struct etmv4_drvdata *drvdata) writel_relaxed(state->trcvictlr, drvdata->base + TRCVICTLR); writel_relaxed(state->trcviiectlr, drvdata->base + TRCVIIECTLR); writel_relaxed(state->trcvissctlr, drvdata->base + TRCVISSCTLR); - writel_relaxed(state->trcvipcssctlr, drvdata->base + TRCVIPCSSCTLR); + if (drvdata->nr_pe_cmp) + writel_relaxed(state->trcvipcssctlr, drvdata->base + TRCVIPCSSCTLR); writel_relaxed(state->trcvdctlr, drvdata->base + TRCVDCTLR); writel_relaxed(state->trcvdsacctlr, drvdata->base + TRCVDSACCTLR); writel_relaxed(state->trcvdarcctlr, drvdata->base + TRCVDARCCTLR);

From: Jack Qiu jack.qiu@huawei.com

stable inclusion from stable-5.10.3 commit 7812d88349b66df8e9071bcf9f04da3f5f575770 bugzilla: 46871

--------------------------------

commit 5335bfc6eb688344bfcd4b4133c002c0ae0d0719 upstream.

section is dirty, but dirty_secmap may not set

Reported-by: Jia Yang jiayang5@huawei.com Fixes: da52f8ade40b ("f2fs: get the right gc victim section when section has several segments") Cc: stable@vger.kernel.org Signed-off-by: Jack Qiu jack.qiu@huawei.com Reviewed-by: Chao Yu yuchao0@huawei.com Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- fs/f2fs/segment.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c index 1596502f7375..f2a4265318f5 100644 --- a/fs/f2fs/segment.c +++ b/fs/f2fs/segment.c @@ -4544,7 +4544,7 @@ static void init_dirty_segmap(struct f2fs_sb_info *sbi) return;

mutex_lock(&dirty_i->seglist_lock); - for (segno = 0; segno < MAIN_SECS(sbi); segno += blks_per_sec) { + for (segno = 0; segno < MAIN_SEGS(sbi); segno += sbi->segs_per_sec) { valid_blocks = get_valid_blocks(sbi, segno, true); secno = GET_SEC_FROM_SEG(sbi, segno);

From: Julian Sax jsbc@gmx.de

stable inclusion from stable-5.10.3 commit 45a13c35c7f8e8ed60c4cac8e66369ce862fff5b bugzilla: 46871

--------------------------------

commit c870d50ce387d84b6438211a7044c60afbd5d60a upstream.

This device uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list.

Cc: stable@vger.kernel.org Signed-off-by: Julian Sax jsbc@gmx.de Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c index 35f3bfc3e6f5..8e0f67455c09 100644 --- a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c +++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c @@ -405,6 +405,14 @@ static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = { }, .driver_data = (void *)&sipodev_desc }, + { + .ident = "Vero K147", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "VERO"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "K147"), + }, + .driver_data = (void *)&sipodev_desc + }, { } /* Terminate list */ };

From: Eric Biggers ebiggers@google.com

stable inclusion from stable-5.10.3 commit 3b7c17a81426289ab3509af8a5dfe4d0d7926933 bugzilla: 46871

--------------------------------

commit 3ceb6543e9cf6ed87cc1fbc6f23ca2db903564cd upstream.

There isn't really any valid reason to use __FSCRYPT_MODE_MAX or FSCRYPT_POLICY_FLAGS_VALID in a userspace program. These constants are only meant to be used by the kernel internally, and they are defined in the UAPI header next to the mode numbers and flags only so that kernel developers don't forget to update them when adding new modes or flags.

In https://lkml.kernel.org/r/20201005074133.1958633-2-satyat@google.com there was an example of someone wanting to use __FSCRYPT_MODE_MAX in a user program, and it was wrong because the program would have broken if __FSCRYPT_MODE_MAX were ever increased. So having this definition available is harmful. FSCRYPT_POLICY_FLAGS_VALID has the same problem.

So, remove these definitions from the UAPI header. Replace FSCRYPT_POLICY_FLAGS_VALID with just listing the valid flags explicitly in the one kernel function that needs it. Move __FSCRYPT_MODE_MAX to fscrypt_private.h, remove the double underscores (which were only present to discourage use by userspace), and add a BUILD_BUG_ON() and comments to (hopefully) ensure it is kept in sync.

Keep the old name FS_POLICY_FLAGS_VALID, since it's been around for longer and there's a greater chance that removing it would break source compatibility with some program. Indeed, mtd-utils is using it in an #ifdef, and removing it would introduce compiler warnings (about FS_POLICY_FLAGS_PAD_* being redefined) into the mtd-utils build. However, reduce its value to 0x07 so that it only includes the flags with old names (the ones present before Linux 5.4), and try to make it clear that it's now "frozen" and no new flags should be added to it.

Fixes: 2336d0deb2d4 ("fscrypt: use FSCRYPT_ prefix for uapi constants") Cc: stable@vger.kernel.org # v5.4+ Link: https://lore.kernel.org/r/20201024005132.495952-1-ebiggers@kernel.org Signed-off-by: Eric Biggers ebiggers@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- fs/crypto/fscrypt_private.h | 9 ++++++--- fs/crypto/keyring.c | 2 +- fs/crypto/keysetup.c | 4 +++- fs/crypto/policy.c | 5 ++++- include/uapi/linux/fscrypt.h | 5 ++--- 5 files changed, 16 insertions(+), 9 deletions(-)

diff --git a/fs/crypto/fscrypt_private.h b/fs/crypto/fscrypt_private.h index 4f5806a3b73d..322ecae9a758 100644 --- a/fs/crypto/fscrypt_private.h +++ b/fs/crypto/fscrypt_private.h @@ -25,6 +25,9 @@ #define FSCRYPT_CONTEXT_V1 1 #define FSCRYPT_CONTEXT_V2 2

+/* Keep this in sync with include/uapi/linux/fscrypt.h */ +#define FSCRYPT_MODE_MAX FSCRYPT_MODE_ADIANTUM + struct fscrypt_context_v1 { u8 version; /* FSCRYPT_CONTEXT_V1 */ u8 contents_encryption_mode; @@ -491,9 +494,9 @@ struct fscrypt_master_key { * Per-mode encryption keys for the various types of encryption policies * that use them. Allocated and derived on-demand. */ - struct fscrypt_prepared_key mk_direct_keys[__FSCRYPT_MODE_MAX + 1]; - struct fscrypt_prepared_key mk_iv_ino_lblk_64_keys[__FSCRYPT_MODE_MAX + 1]; - struct fscrypt_prepared_key mk_iv_ino_lblk_32_keys[__FSCRYPT_MODE_MAX + 1]; + struct fscrypt_prepared_key mk_direct_keys[FSCRYPT_MODE_MAX + 1]; + struct fscrypt_prepared_key mk_iv_ino_lblk_64_keys[FSCRYPT_MODE_MAX + 1]; + struct fscrypt_prepared_key mk_iv_ino_lblk_32_keys[FSCRYPT_MODE_MAX + 1];

/* Hash key for inode numbers. Initialized only when needed. */ siphash_key_t mk_ino_hash_key; diff --git a/fs/crypto/keyring.c b/fs/crypto/keyring.c index 53cc552a7b8f..d7ec52cb3d9a 100644 --- a/fs/crypto/keyring.c +++ b/fs/crypto/keyring.c @@ -44,7 +44,7 @@ static void free_master_key(struct fscrypt_master_key *mk)

wipe_master_key_secret(&mk->mk_secret);

- for (i = 0; i <= __FSCRYPT_MODE_MAX; i++) { + for (i = 0; i <= FSCRYPT_MODE_MAX; i++) { fscrypt_destroy_prepared_key(&mk->mk_direct_keys[i]); fscrypt_destroy_prepared_key(&mk->mk_iv_ino_lblk_64_keys[i]); fscrypt_destroy_prepared_key(&mk->mk_iv_ino_lblk_32_keys[i]); diff --git a/fs/crypto/keysetup.c b/fs/crypto/keysetup.c index d595abb8ef90..31fb08d94f87 100644 --- a/fs/crypto/keysetup.c +++ b/fs/crypto/keysetup.c @@ -56,6 +56,8 @@ static struct fscrypt_mode * select_encryption_mode(const union fscrypt_policy *policy, const struct inode *inode) { + BUILD_BUG_ON(ARRAY_SIZE(fscrypt_modes) != FSCRYPT_MODE_MAX + 1); + if (S_ISREG(inode->i_mode)) return &fscrypt_modes[fscrypt_policy_contents_mode(policy)];

@@ -168,7 +170,7 @@ static int setup_per_mode_enc_key(struct fscrypt_info *ci, unsigned int hkdf_infolen = 0; int err;

- if (WARN_ON(mode_num > __FSCRYPT_MODE_MAX)) + if (WARN_ON(mode_num > FSCRYPT_MODE_MAX)) return -EINVAL;

prep_key = &keys[mode_num]; diff --git a/fs/crypto/policy.c b/fs/crypto/policy.c index 4441d9944b9e..faa0f21daa68 100644 --- a/fs/crypto/policy.c +++ b/fs/crypto/policy.c @@ -175,7 +175,10 @@ static bool fscrypt_supported_v2_policy(const struct fscrypt_policy_v2 *policy, return false; }

- if (policy->flags & ~FSCRYPT_POLICY_FLAGS_VALID) { + if (policy->flags & ~(FSCRYPT_POLICY_FLAGS_PAD_MASK | + FSCRYPT_POLICY_FLAG_DIRECT_KEY | + FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64 | + FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32)) { fscrypt_warn(inode, "Unsupported encryption flags (0x%02x)", policy->flags); return false; diff --git a/include/uapi/linux/fscrypt.h b/include/uapi/linux/fscrypt.h index e5de60336938..9f4428be3e36 100644 --- a/include/uapi/linux/fscrypt.h +++ b/include/uapi/linux/fscrypt.h @@ -20,7 +20,6 @@ #define FSCRYPT_POLICY_FLAG_DIRECT_KEY 0x04 #define FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64 0x08 #define FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32 0x10 -#define FSCRYPT_POLICY_FLAGS_VALID 0x1F

/* Encryption algorithms */ #define FSCRYPT_MODE_AES_256_XTS 1 @@ -28,7 +27,7 @@ #define FSCRYPT_MODE_AES_128_CBC 5 #define FSCRYPT_MODE_AES_128_CTS 6 #define FSCRYPT_MODE_ADIANTUM 9 -#define __FSCRYPT_MODE_MAX 9 +/* If adding a mode number > 9, update FSCRYPT_MODE_MAX in fscrypt_private.h */

/* * Legacy policy version; ad-hoc KDF and no key verification. @@ -177,7 +176,7 @@ struct fscrypt_get_key_status_arg { #define FS_POLICY_FLAGS_PAD_32 FSCRYPT_POLICY_FLAGS_PAD_32 #define FS_POLICY_FLAGS_PAD_MASK FSCRYPT_POLICY_FLAGS_PAD_MASK #define FS_POLICY_FLAG_DIRECT_KEY FSCRYPT_POLICY_FLAG_DIRECT_KEY -#define FS_POLICY_FLAGS_VALID FSCRYPT_POLICY_FLAGS_VALID +#define FS_POLICY_FLAGS_VALID 0x07 /* contains old flags only */ #define FS_ENCRYPTION_MODE_INVALID 0 /* never used */ #define FS_ENCRYPTION_MODE_AES_256_XTS FSCRYPT_MODE_AES_256_XTS #define FS_ENCRYPTION_MODE_AES_256_GCM 2 /* never used */

From: Eric Biggers ebiggers@google.com

stable inclusion from stable-5.10.3 commit 456fcfca6dcfbb93515392564de39592793f81b2 bugzilla: 46871

--------------------------------

commit 76786a0f083473de31678bdb259a3d4167cf756d upstream.

As described in "fscrypt: add fscrypt_is_nokey_name()", it's possible to create a duplicate filename in an encrypted directory by creating a file concurrently with adding the directory's encryption key.

Fix this bug on ubifs by rejecting no-key dentries in ubifs_create(), ubifs_mkdir(), ubifs_mknod(), and ubifs_symlink().

Note that ubifs doesn't actually report the duplicate filenames from readdir, but rather it seems to replace the original dentry with a new one (which is still wrong, just a different effect from ext4).

On ubifs, this fixes xfstest generic/595 as well as the new xfstest I wrote specifically for this bug.

Fixes: f4f61d2cc6d8 ("ubifs: Implement encrypted filenames") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201118075609.120337-5-ebiggers@kernel.org Signed-off-by: Eric Biggers ebiggers@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- fs/ubifs/dir.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c index 155521e51ac5..08fde777c324 100644 --- a/fs/ubifs/dir.c +++ b/fs/ubifs/dir.c @@ -270,6 +270,15 @@ static struct dentry *ubifs_lookup(struct inode *dir, struct dentry *dentry, return d_splice_alias(inode, dentry); }

+static int ubifs_prepare_create(struct inode *dir, struct dentry *dentry, + struct fscrypt_name *nm) +{ + if (fscrypt_is_nokey_name(dentry)) + return -ENOKEY; + + return fscrypt_setup_filename(dir, &dentry->d_name, 0, nm); +} + static int ubifs_create(struct inode *dir, struct dentry *dentry, umode_t mode, bool excl) { @@ -293,7 +302,7 @@ static int ubifs_create(struct inode *dir, struct dentry *dentry, umode_t mode, if (err) return err;

- err = fscrypt_setup_filename(dir, &dentry->d_name, 0, &nm); + err = ubifs_prepare_create(dir, dentry, &nm); if (err) goto out_budg;

@@ -953,7 +962,7 @@ static int ubifs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode) if (err) return err;

- err = fscrypt_setup_filename(dir, &dentry->d_name, 0, &nm); + err = ubifs_prepare_create(dir, dentry, &nm); if (err) goto out_budg;

@@ -1038,7 +1047,7 @@ static int ubifs_mknod(struct inode *dir, struct dentry *dentry, return err; }

- err = fscrypt_setup_filename(dir, &dentry->d_name, 0, &nm); + err = ubifs_prepare_create(dir, dentry, &nm); if (err) { kfree(dev); goto out_budg; @@ -1122,7 +1131,7 @@ static int ubifs_symlink(struct inode *dir, struct dentry *dentry, if (err) return err;

- err = fscrypt_setup_filename(dir, &dentry->d_name, 0, &nm); + err = ubifs_prepare_create(dir, dentry, &nm); if (err) goto out_budg;

From: Eric Biggers ebiggers@google.com

stable inclusion from stable-5.10.3 commit c2c9944b5607357568f629f93a592db4540206fe bugzilla: 46871

--------------------------------

commit bfc2b7e8518999003a61f91c1deb5e88ed77b07d upstream.

As described in "fscrypt: add fscrypt_is_nokey_name()", it's possible to create a duplicate filename in an encrypted directory by creating a file concurrently with adding the directory's encryption key.

Fix this bug on f2fs by rejecting no-key dentries in f2fs_add_link().

Note that the weird check for the current task in f2fs_do_add_link() seems to make this bug difficult to reproduce on f2fs.

Fixes: 9ea97163c6da ("f2fs crypto: add filename encryption for f2fs_add_link") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201118075609.120337-4-ebiggers@kernel.org Signed-off-by: Eric Biggers ebiggers@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- fs/f2fs/f2fs.h | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index cb700d797296..9a321c52face 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -3251,6 +3251,8 @@ bool f2fs_empty_dir(struct inode *dir);

static inline int f2fs_add_link(struct dentry *dentry, struct inode *inode) { + if (fscrypt_is_nokey_name(dentry)) + return -ENOKEY; return f2fs_do_add_link(d_inode(dentry->d_parent), &dentry->d_name, inode, inode->i_ino, inode->i_mode); }

From: Jan Kara jack@suse.cz

stable inclusion from stable-5.10.3 commit e196311e0d696be7b3703ae4bd7f1c8f0eb5e57e bugzilla: 46871

--------------------------------

commit 11c514a99bb960941535134f0587102855e8ddee upstream.

Perform basic sanity checks of quota headers to avoid kernel crashes on corrupted quota files.

CC: stable@vger.kernel.org Reported-by: syzbot+f816042a7ae2225f25ba@syzkaller.appspotmail.com Reviewed-by: Andreas Dilger adilger@dilger.ca Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- fs/quota/quota_v2.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)

diff --git a/fs/quota/quota_v2.c b/fs/quota/quota_v2.c index e69a2bfdd81c..c21106557a37 100644 --- a/fs/quota/quota_v2.c +++ b/fs/quota/quota_v2.c @@ -157,6 +157,25 @@ static int v2_read_file_info(struct super_block *sb, int type) qinfo->dqi_entry_size = sizeof(struct v2r1_disk_dqblk); qinfo->dqi_ops = &v2r1_qtree_ops; } + ret = -EUCLEAN; + /* Some sanity checks of the read headers... */ + if ((loff_t)qinfo->dqi_blocks << qinfo->dqi_blocksize_bits > + i_size_read(sb_dqopt(sb)->files[type])) { + quota_error(sb, "Number of blocks too big for quota file size (%llu > %llu).", + (loff_t)qinfo->dqi_blocks << qinfo->dqi_blocksize_bits, + i_size_read(sb_dqopt(sb)->files[type])); + goto out; + } + if (qinfo->dqi_free_blk >= qinfo->dqi_blocks) { + quota_error(sb, "Free block number too big (%u >= %u).", + qinfo->dqi_free_blk, qinfo->dqi_blocks); + goto out; + } + if (qinfo->dqi_free_entry >= qinfo->dqi_blocks) { + quota_error(sb, "Block with free entry too big (%u >= %u).", + qinfo->dqi_free_entry, qinfo->dqi_blocks); + goto out; + } ret = 0; out: up_read(&dqopt->dqio_sem);

From: Antti Palosaari crope@iki.fi

stable inclusion from stable-5.10.3 commit 7730b2f41cefdefeb8837257fc7d69cb583195cd bugzilla: 46871

--------------------------------

commit 9c60cc797cf72e95bb39f32316e9f0e5f85435f9 upstream.

SPI bus number must be assigned dynamically for each device, otherwise it will crash when multiple devices are plugged to system.

Reported-and-tested-by: syzbot+c60ddb60b685777d9d59@syzkaller.appspotmail.com

Cc: stable@vger.kernel.org Signed-off-by: Antti Palosaari crope@iki.fi Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- drivers/media/usb/msi2500/msi2500.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/usb/msi2500/msi2500.c b/drivers/media/usb/msi2500/msi2500.c index 65be6f140fe8..1c60dfb647e5 100644 --- a/drivers/media/usb/msi2500/msi2500.c +++ b/drivers/media/usb/msi2500/msi2500.c @@ -1230,7 +1230,7 @@ static int msi2500_probe(struct usb_interface *intf, }

dev->master = master; - master->bus_num = 0; + master->bus_num = -1; master->num_chipselect = 1; master->transfer_one_message = msi2500_transfer_one_message; spi_master_set_devdata(master, dev);

From: Anant Thazhemadam anant.thazhemadam@gmail.com

stable inclusion from stable-5.10.3 commit 05725b40b9455d1bb36dd24a1f4b5d85e20d6c98 bugzilla: 46871

--------------------------------

commit 2d9463083ce92636a1bdd3e30d1236e3e95d859e upstream.

syzbot discovered a bug in which an OOB access was being made because an unsuitable key_idx value was wrongly considered to be acceptable while deleting a key in nl80211_del_key().

Since we don't know the cipher at the time of deletion, if cfg80211_validate_key_settings() were to be called directly in nl80211_del_key(), even valid keys would be wrongly determined invalid, and deletion wouldn't occur correctly. For this reason, a new function - cfg80211_valid_key_idx(), has been created, to determine if the key_idx value provided is valid or not. cfg80211_valid_key_idx() is directly called in 2 places - nl80211_del_key(), and cfg80211_validate_key_settings().

Reported-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com Tested-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com Suggested-by: Johannes Berg johannes@sipsolutions.net Signed-off-by: Anant Thazhemadam anant.thazhemadam@gmail.com Link: https://lore.kernel.org/r/20201204215825.129879-1-anant.thazhemadam@gmail.co... Cc: stable@vger.kernel.org [also disallow IGTK key IDs if no IGTK cipher is supported] Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Signed-off-by: Chen Jun chenjun102@huawei.com --- net/wireless/core.h | 2 ++ net/wireless/nl80211.c | 7 +++--- net/wireless/util.c | 51 +++++++++++++++++++++++++++++++++++------- 3 files changed, 49 insertions(+), 11 deletions(-)

diff --git a/net/wireless/core.h b/net/wireless/core.h index e3e9686859d4..7df91f940212 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -433,6 +433,8 @@ void cfg80211_sme_abandon_assoc(struct wireless_dev *wdev);

/* internal helpers */ bool cfg80211_supported_cipher_suite(struct wiphy *wiphy, u32 cipher); +bool cfg80211_valid_key_idx(struct cfg80211_registered_device *rdev, + int key_idx, bool pairwise); int cfg80211_validate_key_settings(struct cfg80211_registered_device *rdev, struct key_params *params, int key_idx, bool pairwise, const u8 *mac_addr); diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index f67ddf2cebcb..535e34a84d65 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4260,9 +4260,6 @@ static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info) if (err) return err;

- if (key.idx < 0) - return -EINVAL; - if (info->attrs[NL80211_ATTR_MAC]) mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);

@@ -4278,6 +4275,10 @@ static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info) key.type != NL80211_KEYTYPE_GROUP) return -EINVAL;

+ if (!cfg80211_valid_key_idx(rdev, key.idx, + key.type == NL80211_KEYTYPE_PAIRWISE)) + return -EINVAL; + if (!rdev->ops->del_key) return -EOPNOTSUPP;

diff --git a/net/wireless/util.c b/net/wireless/util.c index f01746894a4e..e4247c354356 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -272,18 +272,53 @@ bool cfg80211_supported_cipher_suite(struct wiphy *wiphy, u32 cipher) return false; }

-int cfg80211_validate_key_settings(struct cfg80211_registered_device *rdev, - struct key_params *params, int key_idx, - bool pairwise, const u8 *mac_addr) +static bool +cfg80211_igtk_cipher_supported(struct cfg80211_registered_device *rdev) { - int max_key_idx = 5; + struct wiphy *wiphy = &rdev->wiphy; + int i; + + for (i = 0; i < wiphy->n_cipher_suites; i++) { + switch (wiphy->cipher_suites[i]) { + case WLAN_CIPHER_SUITE_AES_CMAC: + case WLAN_CIPHER_SUITE_BIP_CMAC_256: + case WLAN_CIPHER_SUITE_BIP_GMAC_128: + case WLAN_CIPHER_SUITE_BIP_GMAC_256: + return true; + } + } + + return false; +}

- if (wiphy_ext_feature_isset(&rdev->wiphy, - NL80211_EXT_FEATURE_BEACON_PROTECTION) || - wiphy_ext_feature_isset(&rdev->wiphy, - NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT)) +bool cfg80211_valid_key_idx(struct cfg80211_registered_device *rdev, + int key_idx, bool pairwise) +{ + int max_key_idx; + + if (pairwise) + max_key_idx = 3; + else if (wiphy_ext_feature_isset(&rdev->wiphy, + NL80211_EXT_FEATURE_BEACON_PROTECTION) || + wiphy_ext_feature_isset(&rdev->wiphy, + NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT)) max_key_idx = 7; + else if (cfg80211_igtk_cipher_supported(rdev)) + max_key_idx = 5; + else + max_key_idx = 3; + if (key_idx < 0 || key_idx > max_key_idx) + return false; + + return true; +} + +int cfg80211_validate_key_settings(struct cfg80211_registered_device *rdev, + struct key_params *params, int key_idx, + bool pairwise, const u8 *mac_addr) +{ + if (!cfg80211_valid_key_idx(rdev, key_idx, pairwise)) return -EINVAL;

if (!pairwise && mac_addr && !(rdev->wiphy.flags & WIPHY_FLAG_IBSS_RSN))