From: Fang Yafen yafen@iscas.ac.cn

Fix the following compile error when using bcm2711_defconfig (for RPi).

/bin/sh: -c: line 0: syntax error near unexpected token `(' /bin/sh: -c: line 0: `set -e; echo ' DTCO arch/arm64/boot/dts/overlays/act-led.dtbo'; mkdir -p arch/arm64/boot/dts/overlays/ ; gcc -E -Wp,-MMD,arch/arm64/boot/dts/overlays/.act-led.dtbo.d.pre.tmp -nostdinc -I./scripts/dtc/include-prefixes -undef -D__DTS__ -x assembler-with-cpp -o arch/arm64/boot/dts/overlays/.act-led.dtbo.dts.tmp arch/arm64/boot/dts/overlays/act-led-overlay.dts ; ./scripts/dtc/dtc -@ -H epapr -O dtb -o arch/arm64/boot/dts/overlays/act-led.dtbo -b 0 -i arch/arm64/boot/dts/overlays/ -Wno-interrupt_provider -Wno-unit_address_vs_reg -Wno-unit_address_format -Wno-gpios_property -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-simple_bus_reg -Wno-unique_unit_address -Wno-pci_device_reg -Wno-interrupts_property ifeq (y,y) -Wno-label_is_string -Wno-reg_format -Wno-pci_device_bus_num -Wno-i2c_bus_reg -Wno-spi_bus_reg -Wno-avoid_default_addr_size endif -d arch/arm64/boot/dts/overlays/.act-led.dtbo.d.dtc.tmp arch/arm64/boot/dts/overlays/.act-led.dtbo.dts.tmp ; cat ...; rm -f arch/arm64/boot/dts/overlays/.act-led.dtbo.d' make[2]: *** [scripts/Makefile.lib;363: arch/arm64/boot/dts/overlays/act-led.dtbo] Error 1 make[2]: *** Waiting for unfinished jobs....

Related patches:

ffa2d13ccc3 BCM2708: Add core Device Tree support 4894352ec98 kbuild: Silence unavoidable dtc overlay warnings a4a4d07f0cf kbuild: keep the original function for non-RPi

Signed-off-by: Fang Yafen yafen@iscas.ac.cn --- scripts/Makefile.lib | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index c23e3ae7ef40..a0e0e2543165 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -342,25 +342,25 @@ endef $(obj)/%.dt.yaml: $(src)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE $(call if_changed_rule,dtc,yaml)

+ifeq ($(CONFIG_OPENEULER_RASPBERRYPI),y) quiet_cmd_dtco = DTCO $@ cmd_dtco = mkdir -p $(dir ${dtc-tmp}) ; \ $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ $(DTC) -@ -H epapr -O dtb -o $@ -b 0 \ -i $(dir $<) $(DTC_FLAGS) \ -Wno-interrupts_property \ -ifeq ($(CONFIG_OPENEULER_RASPBERRYPI),y) \ -Wno-label_is_string \ -Wno-reg_format \ -Wno-pci_device_bus_num \ -Wno-i2c_bus_reg \ -Wno-spi_bus_reg \ -Wno-avoid_default_addr_size \ -endif \ -d $(depfile).dtc.tmp $(dtc-tmp) ; \ cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)

$(obj)/%.dtbo: $(src)/%-overlay.dts FORCE $(call if_changed_dep,dtco) +endif

dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)