From: Jernej Skrabec jernej.skrabec@gmail.com
stable inclusion from stable-v6.6.31 commit 0b82eb134d2942ecc669e2ab2be3f0a58d79428a category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I9TOGH CVE: CVE-2023-52882
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit 7e91ed763dc07437777bd012af7a2bd4493731ff ]
While PLL CPUX clock rate change when CPU is running from it works in vast majority of cases, now and then it causes instability. This leads to system crashes and other undefined behaviour. After a lot of testing (30+ hours) while also doing a lot of frequency switches, we can't observe any instability issues anymore when doing reparenting to stable clock like 24 MHz oscillator.
Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Reported-by: Chad Wagner wagnerch42@gmail.com Link: https://forum.libreelec.tv/thread/27295-orange-pi-3-lts-freezes/ Tested-by: Chad Wagner wagnerch42@gmail.com Reviewed-by: Chen-Yu Tsai wens@csie.org Link: https://lore.kernel.org/r/20231013181712.2128037-1-jernej.skrabec@gmail.com Signed-off-by: Jernej Skrabec jernej.skrabec@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yu Liao liaoyu15@huawei.com --- drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c index 42568c616181..892df807275c 100644 --- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c @@ -1181,11 +1181,18 @@ static const u32 usb2_clk_regs[] = { SUN50I_H6_USB3_CLK_REG, };
+static struct ccu_mux_nb sun50i_h6_cpu_nb = { + .common = &cpux_clk.common, + .cm = &cpux_clk.mux, + .delay_us = 1, + .bypass_index = 0, /* index of 24 MHz oscillator */ +}; + static int sun50i_h6_ccu_probe(struct platform_device *pdev) { void __iomem *reg; + int i, ret; u32 val; - int i;
reg = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(reg)) @@ -1252,7 +1259,15 @@ static int sun50i_h6_ccu_probe(struct platform_device *pdev) val |= BIT(24); writel(val, reg + SUN50I_H6_HDMI_CEC_CLK_REG);
- return devm_sunxi_ccu_probe(&pdev->dev, reg, &sun50i_h6_ccu_desc); + ret = devm_sunxi_ccu_probe(&pdev->dev, reg, &sun50i_h6_ccu_desc); + if (ret) + return ret; + + /* Reparent CPU during PLL CPUX rate changes */ + ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk, + &sun50i_h6_cpu_nb); + + return 0; }
static const struct of_device_id sun50i_h6_ccu_ids[] = {
反馈: 您发送到kernel@openeuler.org的补丁/补丁集,转换为PR失败! 邮件列表地址:https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/N... 失败原因:应用补丁/补丁集失败,Patch failed at 0001 clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change 建议解决方法:请查看失败原因, 确认补丁是否可以应用在当前期望分支的最新代码上
FeedBack: The patch(es) which you have sent to kernel@openeuler.org has been converted to PR failed! Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/N... Failed Reason: apply patch(es) failed, Patch failed at 0001 clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change Suggest Solution: please checkout if the failed patch(es) can work on the newest codes in expected branch