From: Daniel Mack daniel@zonque.org

commit 1ed9ec9b08addbd8d3e36d5f4a652d8590a6ddb7 upstream.

The driver for Marvell switches puts all ports in IGMP snooping mode which results in all IGMP/MLD frames that ingress on the ports to be forwarded to the CPU only.

The bridge code in the kernel can then interpret these frames and act upon them, for instance by updating the mdb in the switch to reflect multicast memberships of stations connected to the ports. However, the IGMP/MLD frames must then also be forwarded to other ports of the bridge so external IGMP queriers can track membership reports, and external multicast clients can receive query reports from foreign IGMP queriers.

Currently, this is impossible as the EDSA tagger sets offload_fwd_mark on the skb when it unwraps the tagged frames, and that will make the switchdev layer prevent the skb from egressing on any other port of the same switch.

To fix that, look at the To_CPU code in the DSA header and make forwarding of the frame possible for trapped IGMP packets.

Introduce some #defines for the frame types to make the code a bit more comprehensive.

This was tested on a Marvell 88E6352 variant.

Signed-off-by: Daniel Mack daniel@zonque.org Reviewed-by: Andrew Lunn andrew@lunn.ch Tested-by: Andrew Lunn andrew@lunn.ch Signed-off-by: David S. Miller davem@davemloft.net Cc: DENG Qingfang dqfext@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/dsa/tag_edsa.c | 37 ++++++++++++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-)

diff --git a/net/dsa/tag_edsa.c b/net/dsa/tag_edsa.c index 4083326b806e..d62d28d358d9 100644 --- a/net/dsa/tag_edsa.c +++ b/net/dsa/tag_edsa.c @@ -17,6 +17,16 @@ #define DSA_HLEN 4 #define EDSA_HLEN 8

+#define FRAME_TYPE_TO_CPU 0x00 +#define FRAME_TYPE_FORWARD 0x03 + +#define TO_CPU_CODE_MGMT_TRAP 0x00 +#define TO_CPU_CODE_FRAME2REG 0x01 +#define TO_CPU_CODE_IGMP_MLD_TRAP 0x02 +#define TO_CPU_CODE_POLICY_TRAP 0x03 +#define TO_CPU_CODE_ARP_MIRROR 0x04 +#define TO_CPU_CODE_POLICY_MIRROR 0x05 + static struct sk_buff *edsa_xmit(struct sk_buff *skb, struct net_device *dev) { struct dsa_port *dp = dsa_slave_to_port(dev); @@ -81,6 +91,8 @@ static struct sk_buff *edsa_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt) { u8 *edsa_header; + int frame_type; + int code; int source_device; int source_port;

@@ -95,8 +107,29 @@ static struct sk_buff *edsa_rcv(struct sk_buff *skb, struct net_device *dev, /* * Check that frame type is either TO_CPU or FORWARD. */ - if ((edsa_header[0] & 0xc0) != 0x00 && (edsa_header[0] & 0xc0) != 0xc0) + frame_type = edsa_header[0] >> 6; + + switch (frame_type) { + case FRAME_TYPE_TO_CPU: + code = (edsa_header[1] & 0x6) | ((edsa_header[2] >> 4) & 1); + + /* + * Mark the frame to never egress on any port of the same switch + * unless it's a trapped IGMP/MLD packet, in which case the + * bridge might want to forward it. + */ + if (code != TO_CPU_CODE_IGMP_MLD_TRAP) + skb->offload_fwd_mark = 1; + + break; + + case FRAME_TYPE_FORWARD: + skb->offload_fwd_mark = 1; + break; + + default: return NULL; + }

/* * Determine source device and port. @@ -160,8 +193,6 @@ static struct sk_buff *edsa_rcv(struct sk_buff *skb, struct net_device *dev, 2 * ETH_ALEN); }

- skb->offload_fwd_mark = 1; - return skb; }

From: Quinn Tran quinn.tran@cavium.com

commit cd4ed6b470f1569692b5d0d295b207f870570829 upstream.

Currently, the rport registration is being called from a single work element that is used to process QLA internal "work_list". This work_list is meant for quick and simple task (ie no sleep). The Rport registration process sometime can be delayed by upper layer. This causes back pressure with the internal queue where other jobs are unable to move forward.

This patch will schedule the registration process with a new work element (fc_port.reg_work). While the RPort is being registered, the current state of the fcport will not move forward until the registration is done. If the state of the fabric has changed, a new field/next_disc_state will record the next action on whether to 'DELETE' or 'Reverify the session/ADISC'.

Signed-off-by: Quinn Tran quinn.tran@cavium.com Signed-off-by: Himanshu Madhani himanshu.madhani@cavium.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Zhengyuan Liu liuzhengyuan@kylinos.cn Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/scsi/qla2xxx/qla_def.h | 6 ++- drivers/scsi/qla2xxx/qla_gbl.h | 5 +- drivers/scsi/qla2xxx/qla_init.c | 66 ++++++++++++++++++++---- drivers/scsi/qla2xxx/qla_os.c | 26 ++++++---- drivers/scsi/qla2xxx/qla_target.c | 83 +++++++++++++++++++++++++------ 5 files changed, 147 insertions(+), 39 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index c41d0dbbbd79..16dd59bcd60a 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2375,11 +2375,13 @@ typedef struct fc_port { unsigned long expires; struct list_head del_list_entry; struct work_struct free_work; - + struct work_struct reg_work; + uint64_t jiffies_at_registration; struct qlt_plogi_ack_t *plogi_link[QLT_PLOGI_LINK_MAX];

uint16_t tgt_id; uint16_t old_tgt_id; + uint16_t sec_since_registration;

uint8_t fcp_prio;

@@ -2412,6 +2414,7 @@ typedef struct fc_port { struct qla_tgt_sess *tgt_session; struct ct_sns_desc ct_desc; enum discovery_state disc_state; + enum discovery_state next_disc_state; enum login_state fw_login_state; unsigned long dm_login_expire; unsigned long plogi_nack_done_deadline; @@ -3222,7 +3225,6 @@ enum qla_work_type { QLA_EVT_GPDB, QLA_EVT_PRLI, QLA_EVT_GPSC, - QLA_EVT_UPD_FCPORT, QLA_EVT_GNL, QLA_EVT_NACK, QLA_EVT_RELOGIN, diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 178974896b5c..b8e4abe804d5 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -54,7 +54,7 @@ extern void qla2x00_abort_isp_cleanup(scsi_qla_host_t *); extern void qla2x00_quiesce_io(scsi_qla_host_t *);

extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *); - +void qla_register_fcport_fn(struct work_struct *); extern void qla2x00_alloc_fw_dump(scsi_qla_host_t *); extern void qla2x00_try_to_stop_firmware(scsi_qla_host_t *);

@@ -109,6 +109,7 @@ int qla24xx_post_newsess_work(struct scsi_qla_host *, port_id_t *, u8 *, u8*, int qla24xx_fcport_handle_login(struct scsi_qla_host *, fc_port_t *); int qla24xx_detect_sfp(scsi_qla_host_t *vha); int qla24xx_post_gpdb_work(struct scsi_qla_host *, fc_port_t *, u8); + void qla2x00_async_prlo_done(struct scsi_qla_host *, fc_port_t *, uint16_t *); extern int qla2x00_post_async_prlo_work(struct scsi_qla_host *, fc_port_t *, @@ -208,7 +209,7 @@ extern void qla2x00_disable_board_on_pci_error(struct work_struct *); extern void qla2x00_sp_compl(void *, int); extern void qla2xxx_qpair_sp_free_dma(void *); extern void qla2xxx_qpair_sp_compl(void *, int); -extern int qla24xx_post_upd_fcport_work(struct scsi_qla_host *, fc_port_t *); +extern void qla24xx_sched_upd_fcport(fc_port_t *); void qla2x00_handle_login_done_event(struct scsi_qla_host *, fc_port_t *, uint16_t *); int qla24xx_post_gnl_work(struct scsi_qla_host *, fc_port_t *); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 9d97dcc91377..237c8aade1f7 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1203,11 +1203,7 @@ void __qla24xx_handle_gpdb_event(scsi_qla_host_t *vha, struct event_arg *ea) vha->fcport_count++; ea->fcport->login_succ = 1;

- ql_dbg(ql_dbg_disc, vha, 0x20d6, - "%s %d %8phC post upd_fcport fcp_cnt %d\n", - __func__, __LINE__, ea->fcport->port_name, - vha->fcport_count); - qla24xx_post_upd_fcport_work(vha, ea->fcport); + qla24xx_sched_upd_fcport(ea->fcport); } else if (ea->fcport->login_succ) { /* * We have an existing session. A late RSCN delivery @@ -1325,6 +1321,7 @@ int qla24xx_fcport_handle_login(struct scsi_qla_host *vha, fc_port_t *fcport) { u16 data[2]; u64 wwn; + u16 sec;

ql_dbg(ql_dbg_disc, vha, 0x20d8, "%s %8phC DS %d LS %d P %d fl %x confl %p rscn %d|%d login %d retry %d lid %d scan %d\n", @@ -1456,6 +1453,22 @@ int qla24xx_fcport_handle_login(struct scsi_qla_host *vha, fc_port_t *fcport) qla24xx_post_prli_work(vha, fcport); break;

+ case DSC_UPD_FCPORT: + sec = jiffies_to_msecs(jiffies - + fcport->jiffies_at_registration)/1000; + if (fcport->sec_since_registration < sec && sec && + !(sec % 60)) { + fcport->sec_since_registration = sec; + ql_dbg(ql_dbg_disc, fcport->vha, 0xffff, + "%s %8phC - Slow Rport registration(%d Sec)\n", + __func__, fcport->port_name, sec); + } + + if (fcport->next_disc_state != DSC_DELETE_PEND) + fcport->next_disc_state = DSC_ADISC; + set_bit(RELOGIN_NEEDED, &vha->dpc_flags); + break; + default: break; } @@ -1571,8 +1584,10 @@ void qla2x00_fcport_event_handler(scsi_qla_host_t *vha, struct event_arg *ea) case RSCN_PORT_ADDR: fcport = qla2x00_find_fcport_by_nportid (vha, &ea->id, 1); - if (fcport) + if (fcport) { fcport->scan_needed = 1; + fcport->rscn_gen++; + }

spin_lock_irqsave(&vha->work_lock, flags); if (vha->scan.scan_flags == 0) { @@ -4740,6 +4755,7 @@ qla2x00_alloc_fcport(scsi_qla_host_t *vha, gfp_t flags) return NULL; } INIT_WORK(&fcport->del_work, qla24xx_delete_sess_fn); + INIT_WORK(&fcport->reg_work, qla_register_fcport_fn); INIT_LIST_HEAD(&fcport->gnl_entry); INIT_LIST_HEAD(&fcport->list);

@@ -5220,13 +5236,15 @@ qla2x00_reg_remote_port(scsi_qla_host_t *vha, fc_port_t *fcport) void qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport) { - fcport->vha = vha; - if (IS_SW_RESV_ADDR(fcport->d_id)) return;

+ ql_dbg(ql_dbg_disc, vha, 0x20ef, "%s %8phC\n", + __func__, fcport->port_name); + + fcport->disc_state = DSC_UPD_FCPORT; + fcport->login_retry = vha->hw->login_retry_count; fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT); - fcport->disc_state = DSC_LOGIN_COMPLETE; fcport->deleted = 0; fcport->logout_on_delete = 1; fcport->login_retry = vha->hw->login_retry_count; @@ -5288,6 +5306,36 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport) } } qla2x00_set_fcport_state(fcport, FCS_ONLINE); + + fcport->disc_state = DSC_LOGIN_COMPLETE; +} + +void qla_register_fcport_fn(struct work_struct *work) +{ + fc_port_t *fcport = container_of(work, struct fc_port, reg_work); + u32 rscn_gen = fcport->rscn_gen; + u16 data[2]; + + if (IS_SW_RESV_ADDR(fcport->d_id)) + return; + + qla2x00_update_fcport(fcport->vha, fcport); + + if (rscn_gen != fcport->rscn_gen) { + /* RSCN(s) came in while registration */ + switch (fcport->next_disc_state) { + case DSC_DELETE_PEND: + qlt_schedule_sess_for_deletion(fcport); + break; + case DSC_ADISC: + data[0] = data[1] = 0; + qla2x00_post_async_adisc_work(fcport->vha, fcport, + data); + break; + default: + break; + } + } }

/* diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 8234448b4fcb..25b376f388bc 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -4792,16 +4792,25 @@ qlafx00_post_aenfx_work(struct scsi_qla_host *vha, uint32_t evtcode, return qla2x00_post_work(vha, e); }

-int qla24xx_post_upd_fcport_work(struct scsi_qla_host *vha, fc_port_t *fcport) +void qla24xx_sched_upd_fcport(fc_port_t *fcport) { - struct qla_work_evt *e; + unsigned long flags;

- e = qla2x00_alloc_work(vha, QLA_EVT_UPD_FCPORT); - if (!e) - return QLA_FUNCTION_FAILED; + if (IS_SW_RESV_ADDR(fcport->d_id)) + return;

- e->u.fcport.fcport = fcport; - return qla2x00_post_work(vha, e); + spin_lock_irqsave(&fcport->vha->work_lock, flags); + if (fcport->disc_state == DSC_UPD_FCPORT) { + spin_unlock_irqrestore(&fcport->vha->work_lock, flags); + return; + } + fcport->jiffies_at_registration = jiffies; + fcport->sec_since_registration = 0; + fcport->next_disc_state = DSC_DELETED; + fcport->disc_state = DSC_UPD_FCPORT; + spin_unlock_irqrestore(&fcport->vha->work_lock, flags); + + queue_work(system_unbound_wq, &fcport->reg_work); }

static @@ -5057,9 +5066,6 @@ qla2x00_do_work(struct scsi_qla_host *vha) case QLA_EVT_GPSC: qla24xx_async_gpsc(vha, e->u.fcport.fcport); break; - case QLA_EVT_UPD_FCPORT: - qla2x00_update_fcport(vha, e->u.fcport.fcport); - break; case QLA_EVT_GNL: qla24xx_async_gnl(vha, e->u.fcport.fcport); break; diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 95206e227730..7b14204c79dd 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -600,14 +600,7 @@ void qla2x00_async_nack_sp_done(void *s, int res) sp->fcport->login_succ = 1;

vha->fcport_count++; - - ql_dbg(ql_dbg_disc, vha, 0x20f3, - "%s %d %8phC post upd_fcport fcp_cnt %d\n", - __func__, __LINE__, - sp->fcport->port_name, - vha->fcport_count); - sp->fcport->disc_state = DSC_UPD_FCPORT; - qla24xx_post_upd_fcport_work(vha, sp->fcport); + qla24xx_sched_upd_fcport(sp->fcport); } else { sp->fcport->login_retry = 0; sp->fcport->disc_state = DSC_LOGIN_COMPLETE; @@ -1227,11 +1220,12 @@ void qlt_schedule_sess_for_deletion(struct fc_port *sess) { struct qla_tgt *tgt = sess->tgt; unsigned long flags; + u16 sec;

- if (sess->disc_state == DSC_DELETE_PEND) + switch (sess->disc_state) { + case DSC_DELETE_PEND: return; - - if (sess->disc_state == DSC_DELETED) { + case DSC_DELETED: if (tgt && tgt->tgt_stop && (tgt->sess_count == 0)) wake_up_all(&tgt->waitQ); if (sess->vha->fcport_count == 0) @@ -1240,6 +1234,24 @@ void qlt_schedule_sess_for_deletion(struct fc_port *sess) if (!sess->plogi_link[QLT_PLOGI_LINK_SAME_WWN] && !sess->plogi_link[QLT_PLOGI_LINK_CONFLICT]) return; + break; + case DSC_UPD_FCPORT: + /* + * This port is not done reporting to upper layer. + * let it finish + */ + sess->next_disc_state = DSC_DELETE_PEND; + sec = jiffies_to_msecs(jiffies - + sess->jiffies_at_registration)/1000; + if (sess->sec_since_registration < sec && sec && !(sec % 5)) { + sess->sec_since_registration = sec; + ql_dbg(ql_dbg_disc, sess->vha, 0xffff, + "%s %8phC : Slow Rport registration(%d Sec)\n", + __func__, sess->port_name, sec); + } + return; + default: + break; }

if (sess->deleted == QLA_SESS_DELETED) @@ -4749,6 +4761,32 @@ static int qlt_handle_login(struct scsi_qla_host *vha, goto out; }

+ if (sess->disc_state == DSC_UPD_FCPORT) { + u16 sec; + + /* + * Remote port registration is still going on from + * previous login. Allow it to finish before we + * accept the new login. + */ + sess->next_disc_state = DSC_DELETE_PEND; + sec = jiffies_to_msecs(jiffies - + sess->jiffies_at_registration) / 1000; + if (sess->sec_since_registration < sec && sec && + !(sec % 5)) { + sess->sec_since_registration = sec; + ql_dbg(ql_dbg_disc, vha, 0xffff, + "%s %8phC - Slow Rport registration (%d Sec)\n", + __func__, sess->port_name, sec); + } + + if (!conflict_sess) + kmem_cache_free(qla_tgt_plogi_cachep, pla); + + qlt_send_term_imm_notif(vha, iocb, 1); + goto out; + } + qlt_plogi_ack_link(vha, pla, sess, QLT_PLOGI_LINK_SAME_WWN); sess->d_id = port_id; sess->login_gen++; @@ -4908,6 +4946,7 @@ static int qlt_24xx_handle_els(struct scsi_qla_host *vha,

if (sess != NULL) { bool delete = false; + int sec; spin_lock_irqsave(&tgt->ha->tgt.sess_lock, flags); switch (sess->fw_login_state) { case DSC_LS_PLOGI_PEND: @@ -4920,9 +4959,24 @@ static int qlt_24xx_handle_els(struct scsi_qla_host *vha, }

switch (sess->disc_state) { + case DSC_UPD_FCPORT: + spin_unlock_irqrestore(&tgt->ha->tgt.sess_lock, + flags); + + sec = jiffies_to_msecs(jiffies - + sess->jiffies_at_registration)/1000; + if (sess->sec_since_registration < sec && sec && + !(sec % 5)) { + sess->sec_since_registration = sec; + ql_dbg(ql_dbg_disc, sess->vha, 0xffff, + "%s %8phC : Slow Rport registration(%d Sec)\n", + __func__, sess->port_name, sec); + } + qlt_send_term_imm_notif(vha, iocb, 1); + return 0; + case DSC_LOGIN_PEND: case DSC_GPDB: - case DSC_UPD_FCPORT: case DSC_LOGIN_COMPLETE: case DSC_ADISC: delete = false; @@ -5959,10 +6013,7 @@ static fc_port_t *qlt_get_port_database(struct scsi_qla_host *vha, case MODE_DUAL: if (newfcport) { if (!IS_IIDMA_CAPABLE(vha->hw) || !vha->hw->flags.gpsc_supported) { - ql_dbg(ql_dbg_disc, vha, 0x20fe, - "%s %d %8phC post upd_fcport fcp_cnt %d\n", - __func__, __LINE__, fcport->port_name, vha->fcport_count); - qla24xx_post_upd_fcport_work(vha, fcport); + qla24xx_sched_upd_fcport(fcport); } else { ql_dbg(ql_dbg_disc, vha, 0x20ff, "%s %d %8phC post gpsc fcp_cnt %d\n",

From: Bob Peterson rpeterso@redhat.com

commit cbcc89b630447ec7836aa2b9242d9bb1725f5a61 upstream.

Since transactions may be freed shortly after they're created, before a log_flush occurs, we need to initialize their ail1 and ail2 lists earlier. Before this patch, the ail1 list was initialized in gfs2_log_flush(). This moves the initialization to the point when the transaction is first created.

Signed-off-by: Bob Peterson rpeterso@redhat.com Signed-off-by: Andreas Gruenbacher agruenba@redhat.com Cc: Salvatore Bonaccorso carnil@debian.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/gfs2/glops.c | 2 ++ fs/gfs2/log.c | 2 -- fs/gfs2/trans.c | 2 ++ 3 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c index c63bee9adb6a..20f08f4391c9 100644 --- a/fs/gfs2/glops.c +++ b/fs/gfs2/glops.c @@ -89,6 +89,8 @@ static void gfs2_ail_empty_gl(struct gfs2_glock *gl) memset(&tr, 0, sizeof(tr)); INIT_LIST_HEAD(&tr.tr_buf); INIT_LIST_HEAD(&tr.tr_databuf); + INIT_LIST_HEAD(&tr.tr_ail1_list); + INIT_LIST_HEAD(&tr.tr_ail2_list); tr.tr_revokes = atomic_read(&gl->gl_ail_count);

if (!tr.tr_revokes) diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c index 06752db213d2..74c1fe9c4a04 100644 --- a/fs/gfs2/log.c +++ b/fs/gfs2/log.c @@ -806,8 +806,6 @@ void gfs2_log_flush(struct gfs2_sbd *sdp, struct gfs2_glock *gl, u32 flags) tr = sdp->sd_log_tr; if (tr) { sdp->sd_log_tr = NULL; - INIT_LIST_HEAD(&tr->tr_ail1_list); - INIT_LIST_HEAD(&tr->tr_ail2_list); tr->tr_first = sdp->sd_log_flush_head; if (unlikely (state == SFS_FROZEN)) gfs2_assert_withdraw(sdp, !tr->tr_num_buf_new && !tr->tr_num_databuf_new); diff --git a/fs/gfs2/trans.c b/fs/gfs2/trans.c index 812b5d5978b2..9313f7904e34 100644 --- a/fs/gfs2/trans.c +++ b/fs/gfs2/trans.c @@ -56,6 +56,8 @@ int gfs2_trans_begin(struct gfs2_sbd *sdp, unsigned int blocks, sizeof(u64)); INIT_LIST_HEAD(&tr->tr_databuf); INIT_LIST_HEAD(&tr->tr_buf); + INIT_LIST_HEAD(&tr->tr_ail1_list); + INIT_LIST_HEAD(&tr->tr_ail2_list);

sb_start_intwrite(sdp->sd_vfs);

From: Miaohe Lin linmiaohe@huawei.com

commit eabe861881a733fc84f286f4d5a1ffaddd4f526f upstream.

pskb_carve_frag_list() may return -ENOMEM in pskb_carve_inside_nonlinear(). we should handle this correctly or we would get wrong sk_buff.

Fixes: 6fa01ccd8830 ("skbuff: Add pskb_extract() helper function") Signed-off-by: Miaohe Lin linmiaohe@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/core/skbuff.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c index af6e9028716d..be4bc833c28a 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -5521,9 +5521,13 @@ static int pskb_carve_inside_nonlinear(struct sk_buff *skb, const u32 off, if (skb_has_frag_list(skb)) skb_clone_fraglist(skb);

- if (k == 0) { - /* split line is in frag list */ - pskb_carve_frag_list(skb, shinfo, off - pos, gfp_mask); + /* split line is in frag list */ + if (k == 0 && pskb_carve_frag_list(skb, shinfo, off - pos, gfp_mask)) { + /* skb_frag_unref() is not needed here as shinfo->nr_frags = 0. */ + if (skb_has_frag_list(skb)) + kfree_skb_list(skb_shinfo(skb)->frag_list); + kfree(data); + return -ENOMEM; } skb_release_data(skb);

From: Olga Kornievskaia kolga@netapp.com

[ Upstream commit 3d7a9520f0c3e6a68b6de8c5812fc8b6d7a52626 ]

A client should be able to handle getting an ERR_DELAY error while doing a LOCK call to reclaim state due to delegation being recalled. This is a transient error that can happen due to server moving its volumes and invalidating its file location cache and upon reference to it during the LOCK call needing to do an expensive lookup (leading to an ERR_DELAY error on a PUTFH).

Signed-off-by: Olga Kornievskaia kolga@netapp.com Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/nfs4proc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 816903fe8e9d..01844ed03b32 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -6997,7 +6997,12 @@ int nfs4_lock_delegation_recall(struct file_lock *fl, struct nfs4_state *state, err = nfs4_set_lock_state(state, fl); if (err != 0) return err; - err = _nfs4_do_setlk(state, F_SETLK, fl, NFS_LOCK_NEW); + do { + err = _nfs4_do_setlk(state, F_SETLK, fl, NFS_LOCK_NEW); + if (err != -NFS4ERR_DELAY) + break; + ssleep(1); + } while (err == -NFS4ERR_DELAY); return nfs4_handle_delegation_recall_error(server, state, stateid, fl, err); }

From: Javed Hasan jhasan@marvell.com

[ Upstream commit 5a5b80f98534416b3b253859897e2ba1dc241e70 ]

Fix for '&fp->skb' double free.

Link: https://lore.kernel.org/r/20200825093940.19612-1-jhasan@marvell.com Reported-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Javed Hasan jhasan@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/libfc/fc_disc.c | 2 -- 1 file changed, 2 deletions(-)

diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index 78cf5b32bca6..0b3f4538c1d4 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -646,8 +646,6 @@ static void fc_disc_gpn_id_resp(struct fc_seq *sp, struct fc_frame *fp, fc_frame_free(fp); out: kref_put(&rdata->kref, fc_rport_destroy); - if (!IS_ERR(fp)) - fc_frame_free(fp); }

/**

From: Vincent Whitchurch vincent.whitchurch@axis.com

[ Upstream commit 59ae97a7a9e1499c2070e29841d1c4be4ae2994a ]

If the zero duty cycle doesn't correspond to any voltage in the voltage table, the PWM regulator returns an -EINVAL from get_voltage_sel() which results in the core erroring out with a "failed to get the current voltage" and ending up not applying the machine constraints.

Instead, return -ENOTRECOVERABLE which makes the core set the voltage since it's at an unknown value.

For example, with this device tree:

fooregulator { compatible = "pwm-regulator"; pwms = <&foopwm 0 100000>; regulator-min-microvolt = <2250000>; regulator-max-microvolt = <2250000>; regulator-name = "fooregulator"; regulator-always-on; regulator-boot-on; voltage-table = <2250000 30>; };

Before this patch:

fooregulator: failed to get the current voltage(-22)

After this patch:

fooregulator: Setting 2250000-2250000uV fooregulator: 2250 mV

Signed-off-by: Vincent Whitchurch vincent.whitchurch@axis.com Link: https://lore.kernel.org/r/20200902130952.24880-1-vincent.whitchurch@axis.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/regulator/pwm-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c index a2fd140eff81..34f3b9778ffa 100644 --- a/drivers/regulator/pwm-regulator.c +++ b/drivers/regulator/pwm-regulator.c @@ -285,7 +285,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev, return ret; }

- drvdata->state = -EINVAL; + drvdata->state = -ENOTRECOVERABLE; drvdata->duty_cycle_table = duty_cycle_table; memcpy(&drvdata->ops, &pwm_regulator_voltage_table_ops, sizeof(drvdata->ops));

From: Chuck Lever chuck.lever@oracle.com

[ Upstream commit 644c9f40cf71969f29add32f32349e71d4995c0b ]

If a write delegation isn't available, the Linux NFS client uses a zero-stateid when performing a SETATTR.

NFSv4.0 provides no mechanism for an NFS server to match such a request to a particular client. It recalls all delegations for that file, even delegations held by the client issuing the request. If that client happens to hold a read delegation, the server will recall it immediately, resulting in an NFS4ERR_DELAY/CB_RECALL/ DELEGRETURN sequence.

Optimize out this pipeline bubble by having the client return any delegations it may hold on a file before it issues a SETATTR(zero-stateid) on that file.

Signed-off-by: Chuck Lever chuck.lever@oracle.com Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/nfs4proc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 01844ed03b32..027528a76274 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3120,8 +3120,10 @@ static int _nfs4_do_setattr(struct inode *inode,

/* Servers should only apply open mode checks for file size changes */ truncate = (arg->iap->ia_valid & ATTR_SIZE) ? true : false; - if (!truncate) + if (!truncate) { + nfs4_inode_make_writeable(inode); goto zero_stateid; + }

if (nfs4_copy_delegation_stateid(inode, FMODE_WRITE, &arg->stateid, &delegation_cred)) { /* Use that stateid */

From: Laurent Pinchart laurent.pinchart@ideasonboard.com

[ Upstream commit d2b86100245080cfdf1e95e9e07477474c1be2bd ]

Enabling a whole subsystem from a single driver 'select' is frowned upon and won't be accepted in new drivers, that need to use 'depends on' instead. Existing selection of DMAENGINES will then cause circular dependencies. Replace them with a dependency.

Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Acked-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/rapidio/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig index d6d2f20c4597..21df2816def7 100644 --- a/drivers/rapidio/Kconfig +++ b/drivers/rapidio/Kconfig @@ -25,7 +25,7 @@ config RAPIDIO_ENABLE_RX_TX_PORTS config RAPIDIO_DMA_ENGINE bool "DMA Engine support for RapidIO" depends on RAPIDIO - select DMADEVICES + depends on DMADEVICES select DMA_ENGINE help Say Y here if you want to use DMA Engine frameork for RapidIO data

From: David Milburn dmilburn@redhat.com

[ Upstream commit e126e8210e950bb83414c4f57b3120ddb8450742 ]

Cancel async event work in case async event has been queued up, and nvme_fc_submit_async_event() runs after event has been freed.

Signed-off-by: David Milburn dmilburn@redhat.com Reviewed-by: Keith Busch kbusch@kernel.org Reviewed-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/fc.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index bb3b447c5646..73db32f97abf 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -1791,6 +1791,7 @@ nvme_fc_term_aen_ops(struct nvme_fc_ctrl *ctrl) struct nvme_fc_fcp_op *aen_op; int i;

+ cancel_work_sync(&ctrl->ctrl.async_event_work); aen_op = ctrl->aen_ops; for (i = 0; i < NVME_NR_AEN_COMMANDS; i++, aen_op++) { if (!aen_op->fcp_req.private)

From: Sahitya Tummala stummala@codeaurora.org

[ Upstream commit e2cab031ba7b5003cd12185b3ef38f1a75e3dae8 ]

If the sbi->ckpt->next_free_nid is not NAT block aligned and if there are free nids in that NAT block between the start of the block and next_free_nid, then those free nids will not be scanned in scan_nat_page(). This results into mismatch between nm_i->available_nids and the sum of nm_i->free_nid_count of all NAT blocks scanned. And nm_i->available_nids will always be greater than the sum of free nids in all the blocks. Under this condition, if we use all the currently scanned free nids, then it will loop forever in f2fs_alloc_nid() as nm_i->available_nids is still not zero but nm_i->free_nid_count of that partially scanned NAT block is zero.

Fix this to align the nm_i->next_scan_nid to the first nid of the corresponding NAT block.

Signed-off-by: Sahitya Tummala stummala@codeaurora.org Reviewed-by: Chao Yu yuchao0@huawei.com Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/f2fs/node.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c index 2ff02541c53d..1934dc6ad1cc 100644 --- a/fs/f2fs/node.c +++ b/fs/f2fs/node.c @@ -2257,6 +2257,9 @@ static int __f2fs_build_free_nids(struct f2fs_sb_info *sbi, if (unlikely(nid >= nm_i->max_nid)) nid = 0;

+ if (unlikely(nid % NAT_ENTRY_PER_BLOCK)) + nid = NAT_BLOCK_OFFSET(nid) * NAT_ENTRY_PER_BLOCK; + /* Enough entries */ if (nm_i->nid_cnt[FREE_NID] >= NAT_ENTRY_PER_BLOCK) return 0;

From: Evan Nimmo evan.nimmo@alliedtelesis.co.nz

[ Upstream commit 0a355aeb24081e4538d4d424cd189f16c0bbd983 ]

If something goes wrong (such as the SCL being stuck low) then we need to reset the PCA chip. The issue with this is that on reset we lose all config settings and the chip ends up in a disabled state which results in a lock up/high CPU usage. We need to re-apply any configuration that had previously been set and re-enable the chip.

Signed-off-by: Evan Nimmo evan.nimmo@alliedtelesis.co.nz Reviewed-by: Chris Packham chris.packham@alliedtelesis.co.nz Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/algos/i2c-algo-pca.c | 35 +++++++++++++++++++++----------- include/linux/i2c-algo-pca.h | 15 ++++++++++++++ 2 files changed, 38 insertions(+), 12 deletions(-)

diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index 0e745f82d6a5..f328de980855 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -50,8 +50,22 @@ static void pca_reset(struct i2c_algo_pca_data *adap) pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IPRESET); pca_outw(adap, I2C_PCA_IND, 0xA5); pca_outw(adap, I2C_PCA_IND, 0x5A); + + /* + * After a reset we need to re-apply any configuration + * (calculated in pca_init) to get the bus in a working state. + */ + pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IMODE); + pca_outw(adap, I2C_PCA_IND, adap->bus_settings.mode); + pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_ISCLL); + pca_outw(adap, I2C_PCA_IND, adap->bus_settings.tlow); + pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_ISCLH); + pca_outw(adap, I2C_PCA_IND, adap->bus_settings.thi); + + pca_set_con(adap, I2C_PCA_CON_ENSIO); } else { adap->reset_chip(adap->data); + pca_set_con(adap, I2C_PCA_CON_ENSIO | adap->bus_settings.clock_freq); } }

@@ -432,13 +446,14 @@ static int pca_init(struct i2c_adapter *adap) " Use the nominal frequency.\n", adap->name); }

- pca_reset(pca_data); - clock = pca_clock(pca_data); printk(KERN_INFO "%s: Clock frequency is %dkHz\n", adap->name, freqs[clock]);

- pca_set_con(pca_data, I2C_PCA_CON_ENSIO | clock); + /* Store settings as these will be needed when the PCA chip is reset */ + pca_data->bus_settings.clock_freq = clock; + + pca_reset(pca_data); } else { int clock; int mode; @@ -505,19 +520,15 @@ static int pca_init(struct i2c_adapter *adap) thi = tlow * min_thi / min_tlow; }

+ /* Store settings as these will be needed when the PCA chip is reset */ + pca_data->bus_settings.mode = mode; + pca_data->bus_settings.tlow = tlow; + pca_data->bus_settings.thi = thi; + pca_reset(pca_data);

printk(KERN_INFO "%s: Clock frequency is %dHz\n", adap->name, clock * 100); - - pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_IMODE); - pca_outw(pca_data, I2C_PCA_IND, mode); - pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLL); - pca_outw(pca_data, I2C_PCA_IND, tlow); - pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLH); - pca_outw(pca_data, I2C_PCA_IND, thi); - - pca_set_con(pca_data, I2C_PCA_CON_ENSIO); } udelay(500); /* 500 us for oscillator to stabilise */

diff --git a/include/linux/i2c-algo-pca.h b/include/linux/i2c-algo-pca.h index d03071732db4..7c522fdd9ea7 100644 --- a/include/linux/i2c-algo-pca.h +++ b/include/linux/i2c-algo-pca.h @@ -53,6 +53,20 @@ #define I2C_PCA_CON_SI 0x08 /* Serial Interrupt */ #define I2C_PCA_CON_CR 0x07 /* Clock Rate (MASK) */

+/** + * struct pca_i2c_bus_settings - The configured PCA i2c bus settings + * @mode: Configured i2c bus mode + * @tlow: Configured SCL LOW period + * @thi: Configured SCL HIGH period + * @clock_freq: The configured clock frequency + */ +struct pca_i2c_bus_settings { + int mode; + int tlow; + int thi; + int clock_freq; +}; + struct i2c_algo_pca_data { void *data; /* private low level data */ void (*write_byte) (void *data, int reg, int val); @@ -64,6 +78,7 @@ struct i2c_algo_pca_data { * For PCA9665, use the frequency you want here. */ unsigned int i2c_clock; unsigned int chip; + struct pca_i2c_bus_settings bus_settings; };

int i2c_pca_add_bus(struct i2c_adapter *);

From: Huacai Chen chenhc@lemote.com

[ Upstream commit 15e9e35cd1dec2bc138464de6bf8ef828df19235 ]

MIPS defines two kvm types:

#define KVM_VM_MIPS_TE 0 #define KVM_VM_MIPS_VZ 1

In Documentation/virt/kvm/api.rst it is said that "You probably want to use 0 as machine type", which implies that type 0 be the "automatic" or "default" type. And, in user-space libvirt use the null-machine (with type 0) to detect the kvm capability, which returns "KVM not supported" on a VZ platform.

I try to fix it in QEMU but it is ugly: https://lists.nongnu.org/archive/html/qemu-devel/2020-08/msg05629.html

And Thomas Huth suggests me to change the definition of kvm type: https://lists.nongnu.org/archive/html/qemu-devel/2020-09/msg03281.html

So I define like this:

#define KVM_VM_MIPS_AUTO 0 #define KVM_VM_MIPS_VZ 1 #define KVM_VM_MIPS_TE 2

Since VZ and TE cannot co-exists, using type 0 on a TE platform will still return success (so old user-space tools have no problems on new kernels); the advantage is that using type 0 on a VZ platform will not return failure. So, the only problem is "new user-space tools use type 2 on old kernels", but if we treat this as a kernel bug, we can backport this patch to old stable kernels.

Signed-off-by: Huacai Chen chenhc@lemote.com Message-Id: 1599734031-28746-1-git-send-email-chenhc@lemote.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/kvm/mips.c | 2 ++ include/uapi/linux/kvm.h | 5 +++-- 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c index e7f5ef6bed0f..79485790f7b5 100644 --- a/arch/mips/kvm/mips.c +++ b/arch/mips/kvm/mips.c @@ -131,6 +131,8 @@ void kvm_arch_check_processor_compat(void *rtn) int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) { switch (type) { + case KVM_VM_MIPS_AUTO: + break; #ifdef CONFIG_KVM_MIPS_VZ case KVM_VM_MIPS_VZ: #else diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 6b6eb5b00a38..723ba0682468 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -746,9 +746,10 @@ struct kvm_ppc_resize_hpt { #define KVM_VM_PPC_HV 1 #define KVM_VM_PPC_PR 2

-/* on MIPS, 0 forces trap & emulate, 1 forces VZ ASE */ -#define KVM_VM_MIPS_TE 0 +/* on MIPS, 0 indicates auto, 1 forces VZ ASE, 2 forces trap & emulate */ +#define KVM_VM_MIPS_AUTO 0 #define KVM_VM_MIPS_VZ 1 +#define KVM_VM_MIPS_TE 2

#define KVM_S390_SIE_PAGE_OFFSET 1

From: Nathan Chancellor natechancellor@gmail.com

[ Upstream commit e9c006bc782c488f485ffe50de20b44e1e3daa18 ]

A new warning in Clang points out that the initialization of mux_pll_src_4plls_p appears incorrect:

../drivers/clk/rockchip/clk-rk3228.c:140:58: warning: suspicious concatenation of string literals in an array initialization; did you mean to separate the elements with a comma? [-Wstring-concatenation] PNAME(mux_pll_src_4plls_p) = { "cpll", "gpll", "hdmiphy" "usb480m" }; ^ , ../drivers/clk/rockchip/clk-rk3228.c:140:48: note: place parentheses around the string literal to silence warning PNAME(mux_pll_src_4plls_p) = { "cpll", "gpll", "hdmiphy" "usb480m" }; ^ 1 warning generated.

Given the name of the variable and the same variable name in rv1108, it seems that this should have been four distinct elements. Fix it up by adding the comma as suggested.

Fixes: 307a2e9ac524 ("clk: rockchip: add clock controller for rk3228") Link: https://github.com/ClangBuiltLinux/linux/issues/1123 Signed-off-by: Nathan Chancellor natechancellor@gmail.com Link: https://lore.kernel.org/r/20200810044020.2063350-1-natechancellor@gmail.com Reviewed-by: Heiko Stübner heiko@sntech.de Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/rockchip/clk-rk3228.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3228.c b/drivers/clk/rockchip/clk-rk3228.c index 04f4f3739e3b..8d11d76e1db7 100644 --- a/drivers/clk/rockchip/clk-rk3228.c +++ b/drivers/clk/rockchip/clk-rk3228.c @@ -144,7 +144,7 @@ PNAME(mux_usb480m_p) = { "usb480m_phy", "xin24m" }; PNAME(mux_hdmiphy_p) = { "hdmiphy_phy", "xin24m" }; PNAME(mux_aclk_cpu_src_p) = { "cpll_aclk_cpu", "gpll_aclk_cpu", "hdmiphy_aclk_cpu" };

-PNAME(mux_pll_src_4plls_p) = { "cpll", "gpll", "hdmiphy" "usb480m" }; +PNAME(mux_pll_src_4plls_p) = { "cpll", "gpll", "hdmiphy", "usb480m" }; PNAME(mux_pll_src_3plls_p) = { "cpll", "gpll", "hdmiphy" }; PNAME(mux_pll_src_2plls_p) = { "cpll", "gpll" }; PNAME(mux_sclk_hdmi_cec_p) = { "cpll", "gpll", "xin24m" };

From: Michael Kelley mikelley@microsoft.com

[ Upstream commit 911e1987efc8f3e6445955fbae7f54b428b92bd3 ]

vmbus_wait_for_unload() looks for a CHANNELMSG_UNLOAD_RESPONSE message coming from Hyper-V. But if the message isn't found for some reason, the panic path gets hung forever. Add a timeout of 10 seconds to prevent this.

Fixes: 415719160de3 ("Drivers: hv: vmbus: avoid scheduling in interrupt context in vmbus_initiate_unload()") Signed-off-by: Michael Kelley mikelley@microsoft.com Reviewed-by: Dexuan Cui decui@microsoft.com Reviewed-by: Vitaly Kuznetsov vkuznets@redhat.com Link: https://lore.kernel.org/r/1600026449-23651-1-git-send-email-mikelley@microso... Signed-off-by: Wei Liu wei.liu@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hv/channel_mgmt.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c index c83361a8e203..7920b0d7e35a 100644 --- a/drivers/hv/channel_mgmt.c +++ b/drivers/hv/channel_mgmt.c @@ -779,7 +779,7 @@ static void vmbus_wait_for_unload(void) void *page_addr; struct hv_message *msg; struct vmbus_channel_message_header *hdr; - u32 message_type; + u32 message_type, i;

/* * CHANNELMSG_UNLOAD_RESPONSE is always delivered to the CPU which was @@ -789,8 +789,11 @@ static void vmbus_wait_for_unload(void) * functional and vmbus_unload_response() will complete * vmbus_connection.unload_event. If not, the last thing we can do is * read message pages for all CPUs directly. + * + * Wait no more than 10 seconds so that the panic path can't get + * hung forever in case the response message isn't seen. */ - while (1) { + for (i = 0; i < 1000; i++) { if (completion_done(&vmbus_connection.unload_event)) break;

From: Thomas Bogendoerfer tsbogend@alpha.franken.de

[ Upstream commit 564c836fd945a94b5dd46597d6b7adb464092650 ]

Commit 930beb5ac09a ("MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>") forgot to select the correct MIPS_L1_CACHE_SHIFT for SNI RM. This breaks non coherent DMA because of a wrong allocation alignment.

Fixes: 930beb5ac09a ("MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>") Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/Kconfig | 1 + 1 file changed, 1 insertion(+)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index a830a9701e50..cc8c8d22afaf 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -852,6 +852,7 @@ config SNI_RM select I8253 select I8259 select ISA + select MIPS_L1_CACHE_SHIFT_6 select SWAP_IO_SPACE if CPU_BIG_ENDIAN select SYS_HAS_CPU_R4X00 select SYS_HAS_CPU_R5000

From: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp

[ Upstream commit ec0972adecb391a8d8650832263a4790f3bfb4df ]

syzbot is reporting OOB read at fbcon_resize() [1], for commit 39b3cffb8cf31117 ("fbcon: prevent user font height or width change from causing potential out-of-bounds access") is by error using registered_fb[con2fb_map[vc->vc_num]]->fbcon_par->p->userfont (which was set to non-zero) instead of fb_display[vc->vc_num].userfont (which remains zero for that display).

We could remove tricky userfont flag [2], for we can determine it by comparing address of the font data and addresses of built-in font data. But since that commit is failing to fix the original OOB read [3], this patch keeps the change minimal in case we decide to revert altogether.

[1] https://syzkaller.appspot.com/bug?id=ebcbbb6576958a496500fee9cf7aa83ea00b592... [2] https://syzkaller.appspot.com/text?tag=Patch&x=14030853900000 [3] https://syzkaller.appspot.com/bug?id=6fba8c186d97cf1011ab17660e633b1cc4e080c...

Reported-by: syzbot syzbot+b38b1ef6edf0c74a8d97@syzkaller.appspotmail.com Signed-off-by: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp Fixes: 39b3cffb8cf31117 ("fbcon: prevent user font height or width change from causing potential out-of-bounds access") Cc: George Kennedy george.kennedy@oracle.com Link: https://lore.kernel.org/r/f6e3e611-8704-1263-d163-f52c906a4f06@I-love.SAKURA... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/core/fbcon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c index 29226b6cb632..0bf5ea518558 100644 --- a/drivers/video/fbdev/core/fbcon.c +++ b/drivers/video/fbdev/core/fbcon.c @@ -1979,7 +1979,7 @@ static int fbcon_resize(struct vc_data *vc, unsigned int width, struct fb_var_screeninfo var = info->var; int x_diff, y_diff, virt_w, virt_h, virt_fw, virt_fh;

- if (ops->p && ops->p->userfont && FNTSIZE(vc->vc_font.data)) { + if (p->userfont && FNTSIZE(vc->vc_font.data)) { int size; int pitch = PITCH(vc->vc_font.width);

From: Yu Kuai yukuai3@huawei.com

[ Upstream commit 64c194c00789889b0f9454f583712f079ba414ee ]

mtk_ddp_comp_init() is called in a loop in mtk_drm_probe(), if it fail, previous successive init component is not proccessed.

Thus uninitialize valid component and put their device if component init failed.

Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Yu Kuai yukuai3@huawei.com Signed-off-by: Chun-Kuang Hu chunkuang.hu@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c index 947bc6d62302..d14321763607 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c @@ -600,8 +600,13 @@ static int mtk_drm_probe(struct platform_device *pdev) pm_runtime_disable(dev); err_node: of_node_put(private->mutex_node); - for (i = 0; i < DDP_COMPONENT_ID_MAX; i++) + for (i = 0; i < DDP_COMPONENT_ID_MAX; i++) { of_node_put(private->comp_node[i]); + if (private->ddp_comp[i]) { + put_device(private->ddp_comp[i]->larb_dev); + private->ddp_comp[i] = NULL; + } + } return ret; }

From: Penghao penghao@uniontech.com

commit bcea6dafeeef7d1a6a8320a249aabf981d63b881 upstream.

Add a USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for the BYD zhaoxin notebook. This notebook come with usb touchpad. And we would like to disable touchpad wakeup on this notebook by default.

Signed-off-by: Penghao penghao@uniontech.com Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20200907023026.28189-1-penghao@uniontech.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 2f068e525a37..4ee810531098 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -397,6 +397,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* Generic RTL8153 based ethernet adapters */ { USB_DEVICE(0x0bda, 0x8153), .driver_info = USB_QUIRK_NO_LPM },

+ /* SONiX USB DEVICE Touchpad */ + { USB_DEVICE(0x0c45, 0x7056), .driver_info = + USB_QUIRK_IGNORE_REMOTE_WAKEUP }, + /* Action Semiconductor flash disk */ { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255 },

From: Oliver Neukum oneukum@suse.com

commit 9cdabcb3ef8c24ca3a456e4db7b012befb688e73 upstream.

read() needs to check whether the device has been disconnected before it tries to talk to the device.

Signed-off-by: Oliver Neukum oneukum@suse.com Reported-by: syzbot+be5b5f86a162a6c281e6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200917103427.15740-1-oneukum@suse.com Cc: stable stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/class/usblp.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 419804c9c974..db36a796af8c 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -827,6 +827,11 @@ static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, lo if (rv < 0) return rv;

+ if (!usblp->present) { + count = -ENODEV; + goto done; + } + if ((avail = usblp->rstatus) < 0) { printk(KERN_ERR "usblp%d: error %d reading from printer\n", usblp->minor, (int)avail);

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

This reverts commit c0a7b7fe0e0f7baa7c1779e401d293d176307c51 which is commit 15cbff3fbbc631952c346744f862fb294504b5e2 upstream.

It causes know regressions and will be reverted in Linus's tree soon.

Reported-by: Hans de Goede hdegoede@redhat.com Cc: Dan Crawford dnlcrwfrd@gmail.com Cc: Takashi Iwai tiwai@suse.de Link: https://lore.kernel.org/r/7efd2fe5-bf38-7f85-891a-eee3845d1493@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_realtek.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8092fd5617fa..9c5b3d19bfa7 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2452,7 +2452,6 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x1462, 0x1276, "MSI-GL73", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x1293, "MSI-GP65", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x7350, "MSI-7350", ALC889_FIXUP_CD), - SND_PCI_QUIRK(0x1462, 0x9c37, "MSI X570-A PRO", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0xda57, "MSI Z270-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS), SND_PCI_QUIRK_VENDOR(0x1462, "MSI", ALC882_FIXUP_GPIO3), SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", ALC882_FIXUP_ABIT_AW9D_MAX),

From: Vincent Huang vincent.huang@tw.synaptics.com

commit 6c77545af100a72bf5e28142b510ba042a17648d upstream.

Add trackpoint variant IDs to allow supported control on Synaptics trackpoints.

Signed-off-by: Vincent Huang vincent.huang@tw.synaptics.com Link: https://lore.kernel.org/r/20200914120327.2592-1-vincent.huang@tw.synaptics.c... Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/input/mouse/trackpoint.c | 10 ++++++---- drivers/input/mouse/trackpoint.h | 10 ++++++---- 2 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c index 6590d10f166f..31c16b68aa31 100644 --- a/drivers/input/mouse/trackpoint.c +++ b/drivers/input/mouse/trackpoint.c @@ -20,10 +20,12 @@ #include "trackpoint.h"

static const char * const trackpoint_variants[] = { - [TP_VARIANT_IBM] = "IBM", - [TP_VARIANT_ALPS] = "ALPS", - [TP_VARIANT_ELAN] = "Elan", - [TP_VARIANT_NXP] = "NXP", + [TP_VARIANT_IBM] = "IBM", + [TP_VARIANT_ALPS] = "ALPS", + [TP_VARIANT_ELAN] = "Elan", + [TP_VARIANT_NXP] = "NXP", + [TP_VARIANT_JYT_SYNAPTICS] = "JYT_Synaptics", + [TP_VARIANT_SYNAPTICS] = "Synaptics", };

/* diff --git a/drivers/input/mouse/trackpoint.h b/drivers/input/mouse/trackpoint.h index 538986e5ac5b..4ebcdf802e9a 100644 --- a/drivers/input/mouse/trackpoint.h +++ b/drivers/input/mouse/trackpoint.h @@ -27,10 +27,12 @@ * 0x01 was the original IBM trackpoint, others implement very limited * subset of trackpoint features. */ -#define TP_VARIANT_IBM 0x01 -#define TP_VARIANT_ALPS 0x02 -#define TP_VARIANT_ELAN 0x03 -#define TP_VARIANT_NXP 0x04 +#define TP_VARIANT_IBM 0x01 +#define TP_VARIANT_ALPS 0x02 +#define TP_VARIANT_ELAN 0x03 +#define TP_VARIANT_NXP 0x04 +#define TP_VARIANT_JYT_SYNAPTICS 0x05 +#define TP_VARIANT_SYNAPTICS 0x06

/* * Commands

From: Tobias Diedrich tobiasdiedrich@gmail.com

commit 3c5a87be170aba8ac40982182f812dcff6ed1ad1 upstream.

These serial ports are exposed by the OOB-management-engine on RealManage-enabled network cards (e.g. AMD DASH enabled systems using Realtek cards).

Because these have 3 BARs, they fail the "num_iomem <= 1" check in serial_pci_guess_board.

I've manually checked the two IOMEM regions and BAR 2 doesn't seem to respond to reads, but BAR 4 seems to be an MMIO version of the IO ports (untested).

With this change, the ports are detected: 0000:02:00.1: ttyS0 at I/O 0x2200 (irq = 82, base_baud = 115200) is a 16550A 0000:02:00.2: ttyS1 at I/O 0x2100 (irq = 55, base_baud = 115200) is a 16550A

lspci output: 02:00.1 0700: 10ec:816a (rev 0e) (prog-if 02 [16550]) Subsystem: 17aa:5082 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 82 IOMMU group: 11 Region 0: I/O ports at 2200 [size=256] Region 2: Memory at fd715000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at fd704000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v2) Endpoint, MSI 01 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s (ok), Width x1 (ok) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Via message/WAKE#, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Vector table: BAR=4 offset=00000000 PBA: BAR=4 offset=00000800 Capabilities: [d0] Vital Product Data Not readable Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [170 v1] Latency Tolerance Reporting Max snoop latency: 0ns Max no snoop latency: 0ns Capabilities: [178 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=150us PortTPowerOnTime=150us L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- T_CommonMode=0us LTR1.2_Threshold=0ns L1SubCtl2: T_PwrOn=10us 02:00.2 0700: 10ec:816b (rev 0e) [...same...]

Signed-off-by: Tobias Diedrich tobiasdiedrich@gmail.com Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20200914173628.GA22508@yamamaya.is-a-geek.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/8250/8250_pci.c | 11 +++++++++++ 1 file changed, 11 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 02091782bc1e..725e5842b8ac 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -5236,6 +5236,17 @@ static const struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_wch384_4 },

+ /* + * Realtek RealManage + */ + { PCI_VENDOR_ID_REALTEK, 0x816a, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_REALTEK, 0x816b, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_b0_1_115200 }, + /* Fintek PCI serial cards */ { PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 }, { PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 },

From: Quentin Perret qperret@google.com

commit 29231826f3bd65500118c473fccf31c0cf14dbc0 upstream.

The CRC calculation done by genksyms is triggered when the parser hits EXPORT_SYMBOL*() macros. At this point, genksyms recursively expands the types of the function parameters, and uses that as the input for the CRC calculation. In the case of forward-declared structs, the type expands to 'UNKNOWN'. Following this, it appears that the result of the expansion of each type is cached somewhere, and seems to be re-used when/if the same type is seen again for another exported symbol in the same C file.

Unfortunately, this can cause CRC 'stability' issues when a struct definition becomes visible in the middle of a C file. For example, let's assume code with the following pattern:

struct foo;

int bar(struct foo *arg) { /* Do work ... */ } EXPORT_SYMBOL_GPL(bar);

/* This contains struct foo's definition */ #include "foo.h"

int baz(struct foo *arg) { /* Do more work ... */ } EXPORT_SYMBOL_GPL(baz);

Here, baz's CRC will be computed using the expansion of struct foo that was cached after bar's CRC calculation ('UNKOWN' here). But if EXPORT_SYMBOL_GPL(bar) is removed from the file (because of e.g. symbol trimming using CONFIG_TRIM_UNUSED_KSYMS), struct foo will be expanded late, during baz's CRC calculation, which now has visibility over the full struct definition, hence resulting in a different CRC for baz.

The proper fix for this certainly is in genksyms, but that will take me some time to get right. In the meantime, we have seen one occurrence of this in the ehci-hcd code which hits this problem because of the way it includes C files halfway through the code together with an unlucky mix of symbol trimming.

In order to workaround this, move the include done in ehci-hub.c early in ehci-hcd.c, hence making sure the struct definitions are visible to the entire file. This improves CRC stability of the ehci-hcd exports even when symbol trimming is enabled.

Acked-by: Alan Stern stern@rowland.harvard.edu Cc: stable stable@vger.kernel.org Signed-off-by: Quentin Perret qperret@google.com Link: https://lore.kernel.org/r/20200916171825.3228122-1-qperret@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/ehci-hcd.c | 1 + drivers/usb/host/ehci-hub.c | 1 - 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 8608ac513fb7..caf9f6b1cd34 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -22,6 +22,7 @@ #include <linux/interrupt.h> #include <linux/usb.h> #include <linux/usb/hcd.h> +#include <linux/usb/otg.h> #include <linux/moduleparam.h> #include <linux/dma-mapping.h> #include <linux/debugfs.h> diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index ce0eaf7d7c12..087402aec5cb 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -14,7 +14,6 @@ */

/*-------------------------------------------------------------------------*/ -#include <linux/usb/otg.h>

#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)

From: Adam Borowski kilobyte@angband.pl

commit 72a9c673636b779e370983fea08e40f97039b981 upstream.

A spanking new machine I just got has all but one USB ports wired as 3.0. Booting defconfig resulted in no keyboard or mouse, which was pretty uncool. Let's enable that -- USB3 is ubiquitous rather than an oddity. As 'y' not 'm' -- recovering from initrd problems needs a keyboard.

Also add it to the 32-bit defconfig.

Signed-off-by: Adam Borowski kilobyte@angband.pl Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/20181009062803.4332-1-kilobyte@angband.pl Signed-off-by: Ingo Molnar mingo@kernel.org Cc: Andy Shevchenko andy.shevchenko@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/configs/i386_defconfig | 1 + arch/x86/configs/x86_64_defconfig | 1 + 2 files changed, 2 insertions(+)

diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index 5a23a4ccd755..9218cb128661 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -245,6 +245,7 @@ CONFIG_USB_HIDDEV=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y +CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index dc0881292904..146a12293396 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -241,6 +241,7 @@ CONFIG_USB_HIDDEV=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y +CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_OHCI_HCD=y