linux-next inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IAI2U3
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?...
--------------------------------
The mbigen interrupt chip has its per node registers located in a contiguous region of page sized chunks. The code maps them into virtual address space as a contiguous region and determines the address of a node by using the node ID as index.
mbigen chip |-----------------|------------|--------------| mgn_node_0 mgn_node_1 ... mgn_node_i |--------------| |--------------| |----------------------| [0x0000, 0x0x0FFF] [0x1000, 0x1FFF] [i*0x1000, (i+1)*0x1000 - 1]
This works correctly up to 10 nodes, but then fails because the 11th's array slot is used for the MGN_CLEAR registers.
mbigen chip |-----------|--------|--------|---------------|--------| mgn_node_0 mgn_node_1 ... mgn_clear_register ... mgn_node_i |-----------------| [0xA000, 0xAFFF]
Skip the MGN_CLEAR register space when calculating the offset for node IDs greater than or equal to ten.
Fixes: a6c2f87b8820 ("irqchip/mbigen: Implement the mbigen irq chip operation functions") Signed-off-by: Yipeng Zou zouyipeng@huawei.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Link: https://lore.kernel.org/all/20240730014400.1751530-1-zouyipeng@huawei.com Signed-off-by: Yipeng Zou zouyipeng@huawei.com --- drivers/irqchip/irq-mbigen.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c index c75cd0fa213b..4e603fa73c33 100644 --- a/drivers/irqchip/irq-mbigen.c +++ b/drivers/irqchip/irq-mbigen.c @@ -300,6 +300,20 @@ static int vtimer_mbigen_set_type(unsigned int cpu_id) } #endif
+static inline unsigned int get_mbigen_node_offset(unsigned int nid) +{ + unsigned int offset = nid * MBIGEN_NODE_OFFSET; + + /* + * To avoid touched clear register in unexpected way, we need to directly + * skip clear register when access to more than 10 mbigen nodes. + */ + if (nid >= (REG_MBIGEN_CLEAR_OFFSET / MBIGEN_NODE_OFFSET)) + offset += MBIGEN_NODE_OFFSET; + + return offset; +} + static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq) { unsigned int nid, pin; @@ -313,8 +327,7 @@ static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq) nid = hwirq / IRQS_PER_MBIGEN_NODE + 1; pin = hwirq % IRQS_PER_MBIGEN_NODE;
- return pin * 4 + nid * MBIGEN_NODE_OFFSET - + REG_MBIGEN_LPI_VEC_OFFSET; + return pin * 4 + get_mbigen_node_offset(nid) + REG_MBIGEN_LPI_VEC_OFFSET; }
static inline void get_mbigen_type_reg(irq_hw_number_t hwirq, @@ -338,8 +351,7 @@ static inline void get_mbigen_type_reg(irq_hw_number_t hwirq, *mask = 1 << (irq_ofst % 32); ofst = irq_ofst / 32 * 4;
- *addr = ofst + nid * MBIGEN_NODE_OFFSET - + REG_MBIGEN_LPI_TYPE_OFFSET; + *addr = ofst + get_mbigen_node_offset(nid) + REG_MBIGEN_LPI_TYPE_OFFSET; }
static inline void get_mbigen_clear_reg(irq_hw_number_t hwirq,
反馈: 您发送到kernel@openeuler.org的补丁/补丁集,已成功转换为PR! PR链接地址: https://gitee.com/openeuler/kernel/pulls/10746 邮件列表地址:https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/P...
FeedBack: The patch(es) which you have sent to kernel@openeuler.org mailing list has been converted to a pull request successfully! Pull request link: https://gitee.com/openeuler/kernel/pulls/10746 Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/P...