From: Vasily Averin vvs@virtuozzo.com

[ Upstream commit e8224bfe77293494626f6eec1884fee7b87d0ced ]

found by smatch: drivers/net/net_failover.c:65 net_failover_open() error: we previously assumed 'primary_dev' could be null (see line 43)

Fixes: cfc80d9a1163 ("net: Introduce net_failover driver") Signed-off-by: Vasily Averin vvs@virtuozzo.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/net_failover.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/net_failover.c b/drivers/net/net_failover.c index beeb7eb76ca3..57273188b71e 100644 --- a/drivers/net/net_failover.c +++ b/drivers/net/net_failover.c @@ -62,7 +62,8 @@ static int net_failover_open(struct net_device *dev) return 0;

err_standby_open: - dev_close(primary_dev); + if (primary_dev) + dev_close(primary_dev); err_primary_open: netif_tx_disable(dev); return err;

From: Ido Schimmel idosch@mellanox.com

[ Upstream commit 8066e6b449e050675df48e7c4b16c29f00507ff0 ]

When proxy mode is enabled the vxlan device might reply to Neighbor Solicitation (NS) messages on behalf of remote hosts.

In case the NS message includes the "Source link-layer address" option [1], the vxlan device will use the specified address as the link-layer destination address in its reply.

To avoid an infinite loop, break out of the options parsing loop when encountering an option with length zero and disregard the NS message.

This is consistent with the IPv6 ndisc code and RFC 4886 which states that "Nodes MUST silently discard an ND packet that contains an option with length zero" [2].

[1] https://tools.ietf.org/html/rfc4861#section-4.3 [2] https://tools.ietf.org/html/rfc4861#section-4.6

Fixes: 4b29dba9c085 ("vxlan: fix nonfunctional neigh_reduce()") Signed-off-by: Ido Schimmel idosch@mellanox.com Acked-by: Nikolay Aleksandrov nikolay@cumulusnetworks.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/vxlan.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 7ee0bad18466..09f0b53b2b77 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1611,6 +1611,10 @@ static struct sk_buff *vxlan_na_create(struct sk_buff *request, ns_olen = request->len - skb_network_offset(request) - sizeof(struct ipv6hdr) - sizeof(*ns); for (i = 0; i < ns_olen-1; i += (ns->opt[i+1]<<3)) { + if (!ns->opt[i + 1]) { + kfree_skb(reply); + return NULL; + } if (ns->opt[i] == ND_OPT_SOURCE_LL_ADDR) { daddr = ns->opt + i + sizeof(struct nd_opt_hdr); break;

From: Lorenz Bauer lmb@cloudflare.com

commit 634efb750435 ("selftests: bpf: Reset global state between reuseport test runs") uses a macro RET_IF which doesn't exist in the v4.19 tree. It is defined as follows:

#define RET_IF(condition, tag, format...) ({ if (CHECK_FAIL(condition)) { printf(tag " " format); return; } })

CHECK_FAIL in turn is defined as:

#define CHECK_FAIL(condition) ({ int __ret = !!(condition); int __save_errno = errno; if (__ret) { test__fail(); fprintf(stdout, "%s:FAIL:%d\n", __func__, __LINE__); } errno = __save_errno; __ret; })

Replace occurences of RET_IF with CHECK. This will abort the test binary if clearing the intermediate state fails.

Fixes: 634efb750435 ("selftests: bpf: Reset global state between reuseport test runs") Reported-by: kernel test robot rong.a.chen@intel.com Signed-off-by: Lorenz Bauer lmb@cloudflare.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- tools/testing/selftests/bpf/test_select_reuseport.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/tools/testing/selftests/bpf/test_select_reuseport.c b/tools/testing/selftests/bpf/test_select_reuseport.c index cdbbdab2725f..b14d25bfa830 100644 --- a/tools/testing/selftests/bpf/test_select_reuseport.c +++ b/tools/testing/selftests/bpf/test_select_reuseport.c @@ -616,13 +616,13 @@ static void cleanup_per_test(void)

for (i = 0; i < NR_RESULTS; i++) { err = bpf_map_update_elem(result_map, &i, &zero, BPF_ANY); - RET_IF(err, "reset elem in result_map", - "i:%u err:%d errno:%d\n", i, err, errno); + CHECK(err, "reset elem in result_map", + "i:%u err:%d errno:%d\n", i, err, errno); }

err = bpf_map_update_elem(linum_map, &zero, &zero, BPF_ANY); - RET_IF(err, "reset line number in linum_map", "err:%d errno:%d\n", - err, errno); + CHECK(err, "reset line number in linum_map", "err:%d errno:%d\n", + err, errno);

for (i = 0; i < REUSEPORT_ARRAY_SIZE; i++) close(sk_fds[i]);

From: Qu Wenruo wqu@suse.com

commit 62fdaa52a3d00a875da771719b6dc537ca79fce1 upstream.

[BUG] With crafted image, btrfs will panic at btree operations:

kernel BUG at fs/btrfs/ctree.c:3894! invalid opcode: 0000 [#1] SMP PTI CPU: 0 PID: 1138 Comm: btrfs-transacti Not tainted 5.0.0-rc8+ #9 RIP: 0010:__push_leaf_left+0x6b6/0x6e0 RSP: 0018:ffffc0bd4128b990 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa0a4ab8f0e38 RCX: 0000000000000000 RDX: ffffa0a280000000 RSI: 0000000000000000 RDI: ffffa0a4b3814000 RBP: ffffc0bd4128ba38 R08: 0000000000001000 R09: ffffc0bd4128b948 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000240 R13: ffffa0a4b556fb60 R14: ffffa0a4ab8f0af0 R15: ffffa0a4ab8f0af0 FS: 0000000000000000(0000) GS:ffffa0a4b7a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2461c80020 CR3: 000000022b32a006 CR4: 00000000000206f0 Call Trace: ? _cond_resched+0x1a/0x50 push_leaf_left+0x179/0x190 btrfs_del_items+0x316/0x470 btrfs_del_csums+0x215/0x3a0 __btrfs_free_extent.isra.72+0x5a7/0xbe0 __btrfs_run_delayed_refs+0x539/0x1120 btrfs_run_delayed_refs+0xdb/0x1b0 btrfs_commit_transaction+0x52/0x950 ? start_transaction+0x94/0x450 transaction_kthread+0x163/0x190 kthread+0x105/0x140 ? btrfs_cleanup_transaction+0x560/0x560 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x35/0x40 Modules linked in: ---[ end trace c2425e6e89b5558f ]---

[CAUSE] The offending csum tree looks like this:

checksum tree key (CSUM_TREE ROOT_ITEM 0) node 29741056 level 1 items 14 free 107 generation 19 owner CSUM_TREE ... key (EXTENT_CSUM EXTENT_CSUM 85975040) block 29630464 gen 17 key (EXTENT_CSUM EXTENT_CSUM 89911296) block 29642752 gen 17 <<< key (EXTENT_CSUM EXTENT_CSUM 92274688) block 29646848 gen 17 ...

leaf 29630464 items 6 free space 1 generation 17 owner CSUM_TREE item 0 key (EXTENT_CSUM EXTENT_CSUM 85975040) itemoff 3987 itemsize 8 range start 85975040 end 85983232 length 8192 ... leaf 29642752 items 0 free space 3995 generation 17 owner 0 ^ empty leaf invalid owner ^

leaf 29646848 items 1 free space 602 generation 17 owner CSUM_TREE item 0 key (EXTENT_CSUM EXTENT_CSUM 92274688) itemoff 627 itemsize 3368 range start 92274688 end 95723520 length 3448832

So we have a corrupted csum tree where one tree leaf is completely empty, causing unbalanced btree, thus leading to unexpected btree balance error.

[FIX] For this particular case, we handle it in two directions to catch it: - Check if the tree block is empty through btrfs_verify_level_key() So that invalid tree blocks won't be read out through btrfs_search_slot() and its variants.

- Check 0 tree owner in tree checker NO tree is using 0 as its tree owner, detect it and reject at tree block read time.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202821 Reviewed-by: Nikolay Borisov nborisov@suse.com Signed-off-by: Qu Wenruo wqu@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Vikash Bansal bvikas@vmware.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Conflicts: fs/btrfs/tree-checker.c Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- fs/btrfs/disk-io.c | 10 ++++++++++ fs/btrfs/tree-checker.c | 6 ++++++ 2 files changed, 16 insertions(+)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index da7a2a530647..9740f7b5d4fb 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -438,6 +438,16 @@ int btrfs_verify_level_key(struct btrfs_fs_info *fs_info, */ if (btrfs_header_generation(eb) > fs_info->last_trans_committed) return 0; + + /* We have @first_key, so this @eb must have at least one item */ + if (btrfs_header_nritems(eb) == 0) { + btrfs_err(fs_info, + "invalid tree nritems, bytenr=%llu nritems=0 expect >0", + eb->start); + WARN_ON(IS_ENABLED(CONFIG_BTRFS_DEBUG)); + return -EUCLEAN; + } + if (found_level) btrfs_node_key_to_cpu(eb, &found_key, 0); else diff --git a/fs/btrfs/tree-checker.c b/fs/btrfs/tree-checker.c index 16a8f60f4e90..c3b2fa79a5b9 100644 --- a/fs/btrfs/tree-checker.c +++ b/fs/btrfs/tree-checker.c @@ -850,6 +850,12 @@ static int check_leaf(struct btrfs_fs_info *fs_info, struct extent_buffer *leaf, owner); return -EUCLEAN; } + /* Unknown tree */ + if (owner == 0) { + generic_err(fs_info, leaf, 0, + "invalid owner, root 0 is not defined"); + return -EUCLEAN; + } return 0; }

From: Stephan Gerhold stephan@gerhold.net

[ Upstream commit 3f8f770575d911c989043d8f0fb8dec96360c41c ]

MMS345L is another first generation touch screen from Melfas, which uses the same registers as MMS152.

However, using I2C_M_NOSTART for it causes errors when reading:

i2c i2c-0: sendbytes: NAK bailout. mms114 0-0048: __mms114_read_reg: i2c transfer failed (-5)

The driver works fine as soon as I2C_M_NOSTART is removed.

Reviewed-by: Andi Shyti andi@etezian.org Signed-off-by: Stephan Gerhold stephan@gerhold.net Link: https://lore.kernel.org/r/20200405170904.61512-1-stephan@gerhold.net [dtor: removed separate mms345l handling, made everyone use standard transfer mode, propagated the 10bit addressing flag to the read part of the transfer as well.] Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/input/touchscreen/mms114.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c index a5ab774da4cc..fca908ba4841 100644 --- a/drivers/input/touchscreen/mms114.c +++ b/drivers/input/touchscreen/mms114.c @@ -91,15 +91,15 @@ static int __mms114_read_reg(struct mms114_data *data, unsigned int reg, if (reg <= MMS114_MODE_CONTROL && reg + len > MMS114_MODE_CONTROL) BUG();

- /* Write register: use repeated start */ + /* Write register */ xfer[0].addr = client->addr; - xfer[0].flags = I2C_M_TEN | I2C_M_NOSTART; + xfer[0].flags = client->flags & I2C_M_TEN; xfer[0].len = 1; xfer[0].buf = &buf;

/* Read data */ xfer[1].addr = client->addr; - xfer[1].flags = I2C_M_RD; + xfer[1].flags = (client->flags & I2C_M_TEN) | I2C_M_RD; xfer[1].len = len; xfer[1].buf = val;

@@ -428,10 +428,8 @@ static int mms114_probe(struct i2c_client *client, const void *match_data; int error;

- if (!i2c_check_functionality(client->adapter, - I2C_FUNC_PROTOCOL_MANGLING)) { - dev_err(&client->dev, - "Need i2c bus that supports protocol mangling\n"); + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "Not supported I2C adapter\n"); return -ENODEV; }

From: Jens Axboe axboe@kernel.dk

[ Upstream commit 18f855e574d9799a0e7489f8ae6fd8447d0dd74a ]

Stefano reported a crash with using SQPOLL with io_uring:

BUG: kernel NULL pointer dereference, address: 00000000000003b0 CPU: 2 PID: 1307 Comm: io_uring-sq Not tainted 5.7.0-rc7 #11 RIP: 0010:task_numa_work+0x4f/0x2c0 Call Trace: task_work_run+0x68/0xa0 io_sq_thread+0x252/0x3d0 kthread+0xf9/0x130 ret_from_fork+0x35/0x40

which is task_numa_work() oopsing on current->mm being NULL.

The task work is queued by task_tick_numa(), which checks if current->mm is NULL at the time of the call. But this state isn't necessarily persistent, if the kthread is using use_mm() to temporarily adopt the mm of a task.

Change the task_tick_numa() check to exclude kernel threads in general, as it doesn't make sense to attempt ot balance for kthreads anyway.

Reported-by: Stefano Garzarella sgarzare@redhat.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Ingo Molnar mingo@kernel.org Acked-by: Peter Zijlstra peterz@infradead.org Link: https://lore.kernel.org/r/865de121-8190-5d30-ece5-3b097dc74431@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- kernel/sched/fair.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index af932fcc63a9..09b0d83d5bbc 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -2698,7 +2698,7 @@ void task_tick_numa(struct rq *rq, struct task_struct *curr) /* * We don't care about NUMA placement if we don't have memory. */ - if (!curr->mm || (curr->flags & PF_EXITING) || work->next != work) + if ((curr->flags & (PF_EXITING | PF_KTHREAD)) || work->next != work) return;

/*

From: Thomas Falcon tlfalcon@linux.ibm.com

[ Upstream commit 784688993ebac34dffe44a9f2fabbe126ebfd4db ]

VNIC protocol version is reported in big-endian format, but it is not byteswapped before logging. Fix that, and remove version comparison as only one protocol version exists at this time.

Signed-off-by: Thomas Falcon tlfalcon@linux.ibm.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/ethernet/ibm/ibmvnic.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index abfd990ba4d8..645298628b6f 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -4295,12 +4295,10 @@ static void ibmvnic_handle_crq(union ibmvnic_crq *crq, dev_err(dev, "Error %ld in VERSION_EXCHG_RSP\n", rc); break; } - dev_info(dev, "Partner protocol version is %d\n", - crq->version_exchange_rsp.version); - if (be16_to_cpu(crq->version_exchange_rsp.version) < - ibmvnic_version) - ibmvnic_version = + ibmvnic_version = be16_to_cpu(crq->version_exchange_rsp.version); + dev_info(dev, "Partner protocol version is %d\n", + ibmvnic_version); send_cap_queries(adapter); break; case QUERY_CAPABILITY_RSP:

From: Masashi Honma masashi.honma@gmail.com

[ Upstream commit 450edd2805982d14ed79733a82927d2857b27cac ]

Some devices like TP-Link TL-WN722N produces this kind of messages frequently.

kernel: ath: phy0: Short RX data len, dropping (dlen: 4)

This warning is useful for developers to recognize that the device (Wi-Fi dongle or USB hub etc) is noisy but not for general users. So this patch make this warning to debug message.

Reported-By: Denis pro.denis@protonmail.com Ref: https://bugzilla.kernel.org/show_bug.cgi?id=207539 Fixes: cd486e627e67 ("ath9k_htc: Discard undersized packets") Signed-off-by: Masashi Honma masashi.honma@gmail.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20200504214443.4485-1-masashi.honma@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c index b5d7ef4da17f..f19393e584dc 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c @@ -999,9 +999,9 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv, * which are not PHY_ERROR (short radar pulses have a length of 3) */ if (unlikely(!rs_datalen || (rs_datalen < 10 && !is_phyerr))) { - ath_warn(common, - "Short RX data len, dropping (dlen: %d)\n", - rs_datalen); + ath_dbg(common, ANY, + "Short RX data len, dropping (dlen: %d)\n", + rs_datalen); goto rx_next; }

From: Kim Phillips kim.phillips@amd.com

[ Upstream commit e2abfc0448a46d8a137505aa180caf14070ec535 ]

Commit

21b5ee59ef18 ("x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF")

mistakenly added erratum #1054 as an OS Visible Workaround (OSVW) ID 0. Erratum #1054 is not OSVW ID 0 [1], so make it a legacy erratum.

There would never have been a false positive on older hardware that has OSVW bit 0 set, since the IRPERF feature was not available.

However, save a couple of RDMSR executions per thread, on modern system configurations that correctly set non-zero values in their OSVW_ID_Length MSRs.

[1] Revision Guide for AMD Family 17h Models 00h-0Fh Processors. The revision guide is available from the bugzilla link below.

Fixes: 21b5ee59ef18 ("x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF") Reported-by: Andrew Cooper andrew.cooper3@citrix.com Signed-off-by: Kim Phillips kim.phillips@amd.com Signed-off-by: Borislav Petkov bp@suse.de Link: https://lkml.kernel.org/r/20200417143356.26054-1-kim.phillips@amd.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/x86/kernel/cpu/amd.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 120769955687..de69090ca142 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -1122,8 +1122,7 @@ static const int amd_erratum_383[] =

/* #1054: Instructions Retired Performance Counter May Be Inaccurate */ static const int amd_erratum_1054[] = - AMD_OSVW_ERRATUM(0, AMD_MODEL_RANGE(0x17, 0, 0, 0x2f, 0xf)); - + AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x17, 0, 0, 0x2f, 0xf));

static bool cpu_has_amd_erratum(struct cpuinfo_x86 *cpu, const int *erratum) {

From: Waiman Long longman@redhat.com

[ Upstream commit d4eaa2837851db2bfed572898bfc17f9a9f9151e ]

For kvmalloc'ed data object that contains sensitive information like cryptographic keys, we need to make sure that the buffer is always cleared before freeing it. Using memset() alone for buffer clearing may not provide certainty as the compiler may compile it away. To be sure, the special memzero_explicit() has to be used.

This patch introduces a new kvfree_sensitive() for freeing those sensitive data objects allocated by kvmalloc(). The relevant places where kvfree_sensitive() can be used are modified to use it.

Fixes: 4f0882491a14 ("KEYS: Avoid false positive ENOMEM error on key read") Suggested-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Waiman Long longman@redhat.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Reviewed-by: Eric Biggers ebiggers@google.com Acked-by: David Howells dhowells@redhat.com Cc: Jarkko Sakkinen jarkko.sakkinen@linux.intel.com Cc: James Morris jmorris@namei.org Cc: "Serge E. Hallyn" serge@hallyn.com Cc: Joe Perches joe@perches.com Cc: Matthew Wilcox willy@infradead.org Cc: David Rientjes rientjes@google.com Cc: Uladzislau Rezki urezki@gmail.com Link: http://lkml.kernel.org/r/20200407200318.11711-1-longman@redhat.com Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- include/linux/mm.h | 1 + mm/util.c | 18 ++++++++++++++++++ security/keys/internal.h | 11 ----------- security/keys/keyctl.c | 16 +++++----------- 4 files changed, 24 insertions(+), 22 deletions(-)

diff --git a/include/linux/mm.h b/include/linux/mm.h index aad6cff6af86..6d86c3668888 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -620,6 +620,7 @@ static inline void *kvcalloc(size_t n, size_t size, gfp_t flags) }

extern void kvfree(const void *addr); +extern void kvfree_sensitive(const void *addr, size_t len);

/* * Mapcount of compound page as a whole, does not include mapped sub-pages. diff --git a/mm/util.c b/mm/util.c index bc847ae3a626..5515219168e8 100644 --- a/mm/util.c +++ b/mm/util.c @@ -453,6 +453,24 @@ void kvfree(const void *addr) } EXPORT_SYMBOL(kvfree);

+/** + * kvfree_sensitive - Free a data object containing sensitive information. + * @addr: address of the data object to be freed. + * @len: length of the data object. + * + * Use the special memzero_explicit() function to clear the content of a + * kvmalloc'ed object containing sensitive data to make sure that the + * compiler won't optimize out the data clearing. + */ +void kvfree_sensitive(const void *addr, size_t len) +{ + if (likely(!ZERO_OR_NULL_PTR(addr))) { + memzero_explicit((void *)addr, len); + kvfree(addr); + } +} +EXPORT_SYMBOL(kvfree_sensitive); + static inline void *__page_rmapping(struct page *page) { unsigned long mapping; diff --git a/security/keys/internal.h b/security/keys/internal.h index eb50212fbbf8..d1b9c5957000 100644 --- a/security/keys/internal.h +++ b/security/keys/internal.h @@ -306,15 +306,4 @@ static inline void key_check(const struct key *key) #define key_check(key) do {} while(0)

#endif - -/* - * Helper function to clear and free a kvmalloc'ed memory object. - */ -static inline void __kvzfree(const void *addr, size_t len) -{ - if (addr) { - memset((void *)addr, 0, len); - kvfree(addr); - } -} #endif /* _INTERNAL_H */ diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c index c07c2e2b2478..9394d72a77e8 100644 --- a/security/keys/keyctl.c +++ b/security/keys/keyctl.c @@ -133,10 +133,7 @@ SYSCALL_DEFINE5(add_key, const char __user *, _type,

key_ref_put(keyring_ref); error3: - if (payload) { - memzero_explicit(payload, plen); - kvfree(payload); - } + kvfree_sensitive(payload, plen); error2: kfree(description); error: @@ -351,7 +348,7 @@ long keyctl_update_key(key_serial_t id,

key_ref_put(key_ref); error2: - __kvzfree(payload, plen); + kvfree_sensitive(payload, plen); error: return ret; } @@ -859,7 +856,7 @@ long keyctl_read_key(key_serial_t keyid, char __user *buffer, size_t buflen) */ if (ret > key_data_len) { if (unlikely(key_data)) - __kvzfree(key_data, key_data_len); + kvfree_sensitive(key_data, key_data_len); key_data_len = ret; continue; /* Allocate buffer */ } @@ -868,7 +865,7 @@ long keyctl_read_key(key_serial_t keyid, char __user *buffer, size_t buflen) ret = -EFAULT; break; } - __kvzfree(key_data, key_data_len); + kvfree_sensitive(key_data, key_data_len);

key_put_out: key_put(key); @@ -1170,10 +1167,7 @@ long keyctl_instantiate_key_common(key_serial_t id, keyctl_change_reqkey_auth(NULL);

error2: - if (payload) { - memzero_explicit(payload, plen); - kvfree(payload); - } + kvfree_sensitive(payload, plen); error: return ret; }

From: Qu Wenruo wqu@suse.com

[ Upstream commit f556faa46eb4e96d0d0772e74ecf66781e132f72 ]

Although we have tree level check at tree read runtime, it's completely based on its parent level. We still need to do accurate level check to avoid invalid tree blocks sneak into kernel space.

The check itself is simple, for leaf its level should always be 0. For nodes its level should be in range [1, BTRFS_MAX_LEVEL - 1].

Signed-off-by: Qu Wenruo wqu@suse.com Reviewed-by: Su Yue suy.fnst@cn.fujitsu.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- fs/btrfs/tree-checker.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)

diff --git a/fs/btrfs/tree-checker.c b/fs/btrfs/tree-checker.c index c3b2fa79a5b9..e8bca525618d 100644 --- a/fs/btrfs/tree-checker.c +++ b/fs/btrfs/tree-checker.c @@ -827,6 +827,13 @@ static int check_leaf(struct btrfs_fs_info *fs_info, struct extent_buffer *leaf, u32 nritems = btrfs_header_nritems(leaf); int slot;

+ if (btrfs_header_level(leaf) != 0) { + generic_err(fs_info, leaf, 0, + "invalid level for leaf, have %d expect 0", + btrfs_header_level(leaf)); + return -EUCLEAN; + } + /* * Extent buffers from a relocation tree have a owner field that * corresponds to the subvolume tree they are based on. So just from an @@ -967,9 +974,16 @@ int btrfs_check_node(struct btrfs_fs_info *fs_info, struct extent_buffer *node) unsigned long nr = btrfs_header_nritems(node); struct btrfs_key key, next_key; int slot; + int level = btrfs_header_level(node); u64 bytenr; int ret = 0;

+ if (level <= 0 || level >= BTRFS_MAX_LEVEL) { + generic_err(fs_info, node, 0, + "invalid level for node, have %d expect [1, %d]", + level, BTRFS_MAX_LEVEL - 1); + return -EUCLEAN; + } if (nr == 0 || nr > BTRFS_NODEPTRS_PER_BLOCK(fs_info)) { btrfs_crit(fs_info, "corrupt node: root=%llu block=%llu, nritems too %s, have %lu expect range [1,%u]",

From: Xiaochun Lee lixc17@lenovo.com

commit 1574051e52cb4b5b7f7509cfd729b76ca1117808 upstream.

The Intel C620 Platform Controller Hub has MROM functions that have non-PCI registers (undocumented in the public spec) where BAR 0 is supposed to be, which results in messages like this:

pci 0000:00:11.0: [Firmware Bug]: reg 0x30: invalid BAR (can't size)

Mark these MROM functions as having non-compliant BARs so we don't try to probe any of them. There are no other BARs on these devices.

See the Intel C620 Series Chipset Platform Controller Hub Datasheet, May 2019, Document Number 336067-007US, sec 2.1, 35.5, 35.6.

[bhelgaas: commit log, add 0xa26d] Link: https://lore.kernel.org/r/1589513467-17070-1-git-send-email-lixiaochun.2888@... Signed-off-by: Xiaochun Lee lixc17@lenovo.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/x86/pci/fixup.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index e723559c386a..0c67a5a94de3 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -572,6 +572,10 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, pci_invalid_bar); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_invalid_bar); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_invalid_bar); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0xa1ec, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0xa1ed, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0xa26c, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0xa26d, pci_invalid_bar);

/* * Device [1022:7808]

From: Hill Ma maahiuzeon@gmail.com

commit 140fd4ac78d385e6c8e6a5757585f6c707085f87 upstream.

On MacBook6,1 reboot would hang unless parameter reboot=pci is added. Make it automatic.

Signed-off-by: Hill Ma maahiuzeon@gmail.com Signed-off-by: Borislav Petkov bp@suse.de Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200425200641.GA1554@cslab.localdomain Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/x86/kernel/reboot.c | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 8fd3cedd9acc..39f3cad58b6c 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -197,6 +197,14 @@ static const struct dmi_system_id reboot_dmi_table[] __initconst = { DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5"), }, }, + { /* Handle problems with rebooting on Apple MacBook6,1 */ + .callback = set_pci_reboot, + .ident = "Apple MacBook6,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook6,1"), + }, + }, { /* Handle problems with rebooting on Apple MacBookPro5 */ .callback = set_pci_reboot, .ident = "Apple MacBookPro5",

From: Chuhong Yuan hslester96@gmail.com

commit d9b8fbf15d05350b36081eddafcf7b15aa1add50 upstream.

snd_es968_pnp_detect() misses a snd_card_free() in a failed path. Add the missed function call to fix it.

Fixes: a20971b201ac ("ALSA: Merge es1688 and es968 drivers") Signed-off-by: Chuhong Yuan hslester96@gmail.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200603092459.1424093-1-hslester96@gmail.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- sound/isa/es1688/es1688.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/isa/es1688/es1688.c b/sound/isa/es1688/es1688.c index 3dfe7e592c25..5a69314413b6 100644 --- a/sound/isa/es1688/es1688.c +++ b/sound/isa/es1688/es1688.c @@ -282,8 +282,10 @@ static int snd_es968_pnp_detect(struct pnp_card_link *pcard, return error; } error = snd_es1688_probe(card, dev); - if (error < 0) + if (error < 0) { + snd_card_free(card); return error; + } pnp_set_card_drvdata(pcard, card); snd_es968_pnp_is_probed = 1; return 0;

From: Takashi Iwai tiwai@suse.de

commit 862b2509d157c629dd26d7ac6c6cdbf043d332eb upstream.

When a USB-audio interface gets runtime-suspended via auto-pm feature, the driver suspends all functionality and increment chip->num_suspended_intf. Later on, when the system gets suspended to S3, the driver increments chip->num_suspended_intf again, skips the device changes, and sets the card power state to SNDRV_CTL_POWER_D3hot. In return, when the system gets resumed from S3, the resume callback decrements chip->num_suspended_intf. Since this refcount is still not zero (it's been runtime-suspended), the whole resume is skipped. But there is a small pitfall here.

The problem is that the driver doesn't restore the card power state after this resume call, leaving it as SNDRV_CTL_POWER_D3hot. So, even after the system resume finishes, the card instance still appears as if it were system-suspended, and this confuses many ioctl accesses that are blocked unexpectedly.

In details, we have two issues behind the scene: one is that the card power state is changed only when the refcount becomes zero, and another is that the prior auto-suspend check is kept in a boolean flag. Although the latter problem is almost negligible since the auto-pm feature is imposed only on the primary interface, but this can be a potential problem on the devices with multiple interfaces.

This patch addresses those issues by the following:

- Replace chip->autosuspended boolean flag with chip->system_suspend counter

- At the first system-suspend, chip->num_suspended_intf is recorded to chip->system_suspend

- At system-resume, the card power state is restored when the chip->num_suspended_intf refcount reaches to chip->system_suspend, i.e. the state returns to the auto-suspended

Also, the patch fixes yet another hidden problem by the code refactoring along with the fixes above: namely, when some resume procedure failed, the driver left chip->num_suspended_intf that was already decreased, and it might lead to the refcount unbalance. In the new code, the refcount decrement is done after the whole resume procedure, and the problem is avoided as well.

Fixes: 0662292aec05 ("ALSA: usb-audio: Handle normal and auto-suspend equally") Reported-and-tested-by: Macpaul Lin macpaul.lin@mediatek.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200603153709.6293-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- sound/usb/card.c | 19 ++++++++++++------- sound/usb/usbaudio.h | 2 +- 2 files changed, 13 insertions(+), 8 deletions(-)

diff --git a/sound/usb/card.c b/sound/usb/card.c index 746a72e23cf9..2644a5ae2b75 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -806,9 +806,6 @@ static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message) if (chip == (void *)-1L) return 0;

- chip->autosuspended = !!PMSG_IS_AUTO(message); - if (!chip->autosuspended) - snd_power_change_state(chip->card, SNDRV_CTL_POWER_D3hot); if (!chip->num_suspended_intf++) { list_for_each_entry(as, &chip->pcm_list, list) { snd_pcm_suspend_all(as->pcm); @@ -822,6 +819,11 @@ static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message) snd_usb_mixer_suspend(mixer); }

+ if (!PMSG_IS_AUTO(message) && !chip->system_suspend) { + snd_power_change_state(chip->card, SNDRV_CTL_POWER_D3hot); + chip->system_suspend = chip->num_suspended_intf; + } + return 0; }

@@ -835,10 +837,10 @@ static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume)

if (chip == (void *)-1L) return 0; - if (--chip->num_suspended_intf) - return 0;

atomic_inc(&chip->active); /* avoid autopm */ + if (chip->num_suspended_intf > 1) + goto out;

list_for_each_entry(as, &chip->pcm_list, list) { err = snd_usb_pcm_resume(as); @@ -860,9 +862,12 @@ static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume) snd_usbmidi_resume(p); }

- if (!chip->autosuspended) + out: + if (chip->num_suspended_intf == chip->system_suspend) { snd_power_change_state(chip->card, SNDRV_CTL_POWER_D0); - chip->autosuspended = 0; + chip->system_suspend = 0; + } + chip->num_suspended_intf--;

err_out: atomic_dec(&chip->active); /* allow autopm after this point */ diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 4a0a5a071d51..0d620c267e7a 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -37,7 +37,7 @@ struct snd_usb_audio { struct usb_interface *pm_intf; u32 usb_id; struct mutex mutex; - unsigned int autosuspended:1; + unsigned int system_suspend; atomic_t active; atomic_t shutdown; atomic_t usage_count;

From: Qiushi Wu wu000273@umn.edu

commit 6e6c25283dff866308c87b49434c7dbad4774cc0 upstream.

kobject_init_and_add() takes reference even when it fails. Thus, when kobject_init_and_add() returns an error, kobject_put() must be called to properly clean up the kobject.

Fixes: 3f8055c35836 ("ACPI / hotplug: Introduce user space interface for hotplug profiles") Signed-off-by: Qiushi Wu wu000273@umn.edu Cc: 3.10+ stable@vger.kernel.org # 3.10+ Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/acpi/sysfs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index f8150c7bfe88..0a8eb8961770 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -990,8 +990,10 @@ void acpi_sysfs_add_hotplug_profile(struct acpi_hotplug_profile *hotplug,

error = kobject_init_and_add(&hotplug->kobj, &acpi_hotplug_profile_ktype, hotplug_kobj, "%s", name); - if (error) + if (error) { + kobject_put(&hotplug->kobj); goto err_out; + }

kobject_uevent(&hotplug->kobj, KOBJ_ADD); return;

From: Ard Biesheuvel ardb@kernel.org

commit ea6f3af4c5e63f6981c0b0ab8ebec438e2d5ef40 upstream.

Per the ACPI spec, interrupts in the range [0, 255] may be handled in AML using individual methods whose naming is based on the format _Exx or _Lxx, where xx is the hex representation of the interrupt index.

Add support for this missing feature to our ACPI GED driver.

Cc: v4.9+ stable@vger.kernel.org # v4.9+ Signed-off-by: Ard Biesheuvel ardb@kernel.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/acpi/evged.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/evged.c b/drivers/acpi/evged.c index f13ba2c07667..abe3497b828d 100644 --- a/drivers/acpi/evged.c +++ b/drivers/acpi/evged.c @@ -88,6 +88,8 @@ static acpi_status acpi_ged_request_interrupt(struct acpi_resource *ares, struct resource r; struct acpi_resource_irq *p = &ares->data.irq; struct acpi_resource_extended_irq *pext = &ares->data.extended_irq; + char ev_name[5]; + u8 trigger;

if (ares->type == ACPI_RESOURCE_TYPE_END_TAG) return AE_OK; @@ -96,14 +98,28 @@ static acpi_status acpi_ged_request_interrupt(struct acpi_resource *ares, dev_err(dev, "unable to parse IRQ resource\n"); return AE_ERROR; } - if (ares->type == ACPI_RESOURCE_TYPE_IRQ) + if (ares->type == ACPI_RESOURCE_TYPE_IRQ) { gsi = p->interrupts[0]; - else + trigger = p->triggering; + } else { gsi = pext->interrupts[0]; + trigger = p->triggering; + }

irq = r.start;

- if (ACPI_FAILURE(acpi_get_handle(handle, "_EVT", &evt_handle))) { + switch (gsi) { + case 0 ... 255: + sprintf(ev_name, "_%c%02hhX", + trigger == ACPI_EDGE_SENSITIVE ? 'E' : 'L', gsi); + + if (ACPI_SUCCESS(acpi_get_handle(handle, ev_name, &evt_handle))) + break; + /* fall through */ + default: + if (ACPI_SUCCESS(acpi_get_handle(handle, "_EVT", &evt_handle))) + break; + dev_err(dev, "cannot locate _EVT method\n"); return AE_ERROR; }

From: Tejun Heo tj@kernel.org

commit 9b0eb69b75bccada2d341d7e7ca342f0cb1c9a6a upstream.

btrfs is going to use css_put() and wbc helpers to improve cgroup writeback support. Add dummy css_get() definition and export wbc helpers to prepare for module and !CONFIG_CGROUP builds.

[only backport the export of __inode_attach_wb for stable kernels - gregkh]

Reported-by: kbuild test robot lkp@intel.com Reviewed-by: Jan Kara jack@suse.cz Signed-off-by: Tejun Heo tj@kernel.org Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- fs/fs-writeback.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index 027e50419f17..fe1604ad9023 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -269,6 +269,7 @@ void __inode_attach_wb(struct inode *inode, struct page *page) if (unlikely(cmpxchg(&inode->i_wb, NULL, wb))) wb_put(wb); } +EXPORT_SYMBOL_GPL(__inode_attach_wb);

/** * locked_inode_to_wb_and_lock_list - determine a locked inode's wb and lock it

From: Lukas Wunner lukas@wunner.de

commit ca8b19d61e3fce5d2d7790cde27a0b57bcb3f341 upstream.

The Designware SPI driver uses devm_spi_register_controller() on bind. As a consequence, on unbind, __device_release_driver() first invokes dw_spi_remove_host() before unregistering the SPI controller via devres_release_all().

This order is incorrect: dw_spi_remove_host() shuts down the chip, rendering the SPI bus inaccessible even though the SPI controller is still registered. When the SPI controller is subsequently unregistered, it unbinds all its slave devices. Because their drivers cannot access the SPI bus, e.g. to quiesce interrupts, the slave devices may be left in an improper state.

As a rule, devm_spi_register_controller() must not be used if the ->remove() hook performs teardown steps which shall be performed after unregistering the controller and specifically after unbinding of slaves.

Fix by reverting to the non-devm variant of spi_register_controller().

An alternative approach would be to use device-managed functions for all steps in dw_spi_remove_host(), e.g. by calling devm_add_action_or_reset() on probe. However that approach would add more LoC to the driver and it wouldn't lend itself as well to backporting to stable.

Fixes: 04f421e7b0b1 ("spi: dw: use managed resources") Signed-off-by: Lukas Wunner lukas@wunner.de Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Cc: stable@vger.kernel.org # v3.14+ Cc: Baruch Siach baruch@tkos.co.il Link: https://lore.kernel.org/r/3fff8cb8ae44a9893840d0688be15bb88c090a14.159040849... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/spi/spi-dw.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index a0168b36ace4..a89f220f599d 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -537,7 +537,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) } }

- ret = devm_spi_register_controller(dev, master); + ret = spi_register_controller(master); if (ret) { dev_err(&master->dev, "problem registering spi master\n"); goto err_dma_exit; @@ -561,6 +561,8 @@ void dw_spi_remove_host(struct dw_spi *dws) { dw_spi_debugfs_remove(dws);

+ spi_unregister_controller(dws->master); + if (dws->dma_ops && dws->dma_ops->dma_exit) dws->dma_ops->dma_exit(dws);

From: Justin Chen justinpopo6@gmail.com

commit 4df3bea7f9d2ddd9ac2c29ba945c7c4db2def29c upstream.

Currently we set the tx/rx buffer to 0xff when NULL. This causes problems with some spi slaves where 0xff is a valid command. Looking at other drivers, the tx/rx buffer is usually set to 0x00 when NULL. Following this convention solves the issue.

Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver") Signed-off-by: Justin Chen justinpopo6@gmail.com Signed-off-by: Kamal Dasu kdasu.kdev@gmail.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200420190853.45614-6-kdasu.kdev@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/spi/spi-bcm-qspi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c index 285a6f463013..2145a70dac69 100644 --- a/drivers/spi/spi-bcm-qspi.c +++ b/drivers/spi/spi-bcm-qspi.c @@ -681,7 +681,7 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots) if (buf) buf[tp.byte] = read_rxram_slot_u8(qspi, slot); dev_dbg(&qspi->pdev->dev, "RD %02x\n", - buf ? buf[tp.byte] : 0xff); + buf ? buf[tp.byte] : 0x0); } else { u16 *buf = tp.trans->rx_buf;

@@ -689,7 +689,7 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots) buf[tp.byte / 2] = read_rxram_slot_u16(qspi, slot); dev_dbg(&qspi->pdev->dev, "RD %04x\n", - buf ? buf[tp.byte] : 0xffff); + buf ? buf[tp.byte / 2] : 0x0); }

update_qspi_trans_byte_count(qspi, &tp, @@ -744,13 +744,13 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi) while (!tstatus && slot < MSPI_NUM_CDRAM) { if (tp.trans->bits_per_word <= 8) { const u8 *buf = tp.trans->tx_buf; - u8 val = buf ? buf[tp.byte] : 0xff; + u8 val = buf ? buf[tp.byte] : 0x00;

write_txram_slot_u8(qspi, slot, val); dev_dbg(&qspi->pdev->dev, "WR %02x\n", val); } else { const u16 *buf = tp.trans->tx_buf; - u16 val = buf ? buf[tp.byte / 2] : 0xffff; + u16 val = buf ? buf[tp.byte / 2] : 0x0000;

write_txram_slot_u16(qspi, slot, val); dev_dbg(&qspi->pdev->dev, "WR %04x\n", val);

From: Christophe JAILLET christophe.jaillet@wanadoo.fr

commit 320bdbd816156f9ca07e5fed7bfb449f2908dda7 upstream.

When a list is completely iterated with 'list_for_each_entry(x, ...)', x is not NULL at the end.

While at it, remove a useless initialization of the ndev variable. It is overridden by 'list_for_each_entry'.

Fixes: f2663872f073 ("crypto: cavium - Register the CNN55XX supported crypto algorithms.") Cc: stable@vger.kernel.org Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/crypto/cavium/nitrox/nitrox_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/cavium/nitrox/nitrox_main.c b/drivers/crypto/cavium/nitrox/nitrox_main.c index fee7cb2ce747..a81f3c7e941d 100644 --- a/drivers/crypto/cavium/nitrox/nitrox_main.c +++ b/drivers/crypto/cavium/nitrox/nitrox_main.c @@ -183,7 +183,7 @@ static void nitrox_remove_from_devlist(struct nitrox_device *ndev)

struct nitrox_device *nitrox_get_first_device(void) { - struct nitrox_device *ndev = NULL; + struct nitrox_device *ndev;

mutex_lock(&devlist_lock); list_for_each_entry(ndev, &ndevlist, list) { @@ -191,7 +191,7 @@ struct nitrox_device *nitrox_get_first_device(void) break; } mutex_unlock(&devlist_lock); - if (!ndev) + if (&ndev->list == &ndevlist) return NULL;

refcount_inc(&ndev->refcnt);

From: Tony Luck tony.luck@intel.com

commit 17fae1294ad9d711b2c3dd0edef479d40c76a5e8 upstream.

An interesting thing happened when a guest Linux instance took a machine check. The VMM unmapped the bad page from guest physical space and passed the machine check to the guest.

Linux took all the normal actions to offline the page from the process that was using it. But then guest Linux crashed because it said there was a second machine check inside the kernel with this stack trace:

do_memory_failure set_mce_nospec set_memory_uc _set_memory_uc change_page_attr_set_clr cpa_flush clflush_cache_range_opt

This was odd, because a CLFLUSH instruction shouldn't raise a machine check (it isn't consuming the data). Further investigation showed that the VMM had passed in another machine check because is appeared that the guest was accessing the bad page.

Fix is to check the scope of the poison by checking the MCi_MISC register. If the entire page is affected, then unmap the page. If only part of the page is affected, then mark the page as uncacheable.

This assumes that VMMs will do the logical thing and pass in the "whole page scope" via the MCi_MISC register (since they unmapped the entire page).

[ bp: Adjust to x86/entry changes. ]

Fixes: 284ce4011ba6 ("x86/memory_failure: Introduce {set, clear}_mce_nospec()") Reported-by: Jue Wang juew@google.com Signed-off-by: Tony Luck tony.luck@intel.com Signed-off-by: Borislav Petkov bp@suse.de Signed-off-by: Thomas Gleixner tglx@linutronix.de Tested-by: Jue Wang juew@google.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200520163546.GA7977@agluck-desk2.amr.corp.intel.... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/x86/include/asm/set_memory.h | 19 +++++++++++++------ arch/x86/kernel/cpu/mce/core.c | 11 +++++++++-- include/linux/set_memory.h | 2 +- 3 files changed, 23 insertions(+), 9 deletions(-)

diff --git a/arch/x86/include/asm/set_memory.h b/arch/x86/include/asm/set_memory.h index 07a25753e85c..bc97b8c0fdf7 100644 --- a/arch/x86/include/asm/set_memory.h +++ b/arch/x86/include/asm/set_memory.h @@ -90,28 +90,35 @@ void set_kernel_text_rw(void); void set_kernel_text_ro(void);

#ifdef CONFIG_X86_64 -static inline int set_mce_nospec(unsigned long pfn) +/* + * Prevent speculative access to the page by either unmapping + * it (if we do not require access to any part of the page) or + * marking it uncacheable (if we want to try to retrieve data + * from non-poisoned lines in the page). + */ +static inline int set_mce_nospec(unsigned long pfn, bool unmap) { unsigned long decoy_addr; int rc;

/* - * Mark the linear address as UC to make sure we don't log more - * errors because of speculative access to the page. * We would like to just call: - * set_memory_uc((unsigned long)pfn_to_kaddr(pfn), 1); + * set_memory_XX((unsigned long)pfn_to_kaddr(pfn), 1); * but doing that would radically increase the odds of a * speculative access to the poison page because we'd have * the virtual address of the kernel 1:1 mapping sitting * around in registers. * Instead we get tricky. We create a non-canonical address * that looks just like the one we want, but has bit 63 flipped. - * This relies on set_memory_uc() properly sanitizing any __pa() + * This relies on set_memory_XX() properly sanitizing any __pa() * results with __PHYSICAL_MASK or PTE_PFN_MASK. */ decoy_addr = (pfn << PAGE_SHIFT) + (PAGE_OFFSET ^ BIT(63));

- rc = set_memory_uc(decoy_addr, 1); + if (unmap) + rc = set_memory_np(decoy_addr, 1); + else + rc = set_memory_uc(decoy_addr, 1); if (rc) pr_warn("Could not invalidate pfn=0x%lx from 1:1 map\n", pfn); return rc; diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c index 35ade24a0ff0..5221c49d335e 100644 --- a/arch/x86/kernel/cpu/mce/core.c +++ b/arch/x86/kernel/cpu/mce/core.c @@ -518,6 +518,13 @@ bool mce_is_memory_error(struct mce *m) } EXPORT_SYMBOL_GPL(mce_is_memory_error);

+static bool whole_page(struct mce *m) +{ + if (!mca_cfg.ser || !(m->status & MCI_STATUS_MISCV)) + return true; + return MCI_MISC_ADDR_LSB(m->misc) >= PAGE_SHIFT; +} + bool mce_is_correctable(struct mce *m) { if (m->cpuvendor == X86_VENDOR_AMD && m->status & MCI_STATUS_DEFERRED) @@ -586,7 +593,7 @@ static int srao_decode_notifier(struct notifier_block *nb, unsigned long val, if (mce_usable_address(mce) && (mce->severity == MCE_AO_SEVERITY)) { pfn = mce->addr >> PAGE_SHIFT; if (!memory_failure(pfn, 0)) - set_mce_nospec(pfn); + set_mce_nospec(pfn, whole_page(mce)); }

return NOTIFY_OK; @@ -1087,7 +1094,7 @@ static int do_memory_failure(struct mce *m) if (ret) pr_err("Memory error not recovered"); else - set_mce_nospec(m->addr >> PAGE_SHIFT); + set_mce_nospec(m->addr >> PAGE_SHIFT, whole_page(m)); return ret; }

diff --git a/include/linux/set_memory.h b/include/linux/set_memory.h index 2a986d282a97..a0e15e7b0b99 100644 --- a/include/linux/set_memory.h +++ b/include/linux/set_memory.h @@ -18,7 +18,7 @@ static inline int set_memory_nx(unsigned long addr, int numpages) { return 0; } #endif

#ifndef set_mce_nospec -static inline int set_mce_nospec(unsigned long pfn) +static inline int set_mce_nospec(unsigned long pfn, bool unmap) { return 0; }

From: Kai Huang kai.huang@linux.intel.com

[ Upstream commit 61455bf26236e7f3d72705382a6437fdfd1bd0af ]

Currently KVM sets 5 most significant bits of physical address bits reported by CPUID (boot_cpu_data.x86_phys_bits) for nonpresent or reserved bits SPTE to mitigate L1TF attack from guest when using shadow MMU. However for some particular Intel CPUs the physical address bits of internal cache is greater than physical address bits reported by CPUID.

Use the kernel's existing boot_cpu_data.x86_cache_bits to determine the five most significant bits. Doing so improves KVM's L1TF mitigation in the unlikely scenario that system RAM overlaps the high order bits of the "real" physical address space as reported by CPUID. This aligns with the kernel's warnings regarding L1TF mitigation, e.g. in the above scenario the kernel won't warn the user about lack of L1TF mitigation if x86_cache_bits is greater than x86_phys_bits.

Also initialize shadow_nonpresent_or_rsvd_mask explicitly to make it consistent with other 'shadow_{xxx}_mask', and opportunistically add a WARN once if KVM's L1TF mitigation cannot be applied on a system that is marked as being susceptible to L1TF.

Reviewed-by: Sean Christopherson sean.j.christopherson@intel.com Signed-off-by: Kai Huang kai.huang@linux.intel.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/x86/kvm/mmu.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 62f1e4663bc3..440ffe810e5d 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -479,16 +479,24 @@ static void kvm_mmu_reset_all_pte_masks(void) * If the CPU has 46 or less physical address bits, then set an * appropriate mask to guard against L1TF attacks. Otherwise, it is * assumed that the CPU is not vulnerable to L1TF. + * + * Some Intel CPUs address the L1 cache using more PA bits than are + * reported by CPUID. Use the PA width of the L1 cache when possible + * to achieve more effective mitigation, e.g. if system RAM overlaps + * the most significant bits of legal physical address space. */ - low_phys_bits = boot_cpu_data.x86_phys_bits; - if (boot_cpu_data.x86_phys_bits < + shadow_nonpresent_or_rsvd_mask = 0; + low_phys_bits = boot_cpu_data.x86_cache_bits; + if (boot_cpu_data.x86_cache_bits < 52 - shadow_nonpresent_or_rsvd_mask_len) { shadow_nonpresent_or_rsvd_mask = - rsvd_bits(boot_cpu_data.x86_phys_bits - + rsvd_bits(boot_cpu_data.x86_cache_bits - shadow_nonpresent_or_rsvd_mask_len, - boot_cpu_data.x86_phys_bits - 1); + boot_cpu_data.x86_cache_bits - 1); low_phys_bits -= shadow_nonpresent_or_rsvd_mask_len; - } + } else + WARN_ON_ONCE(boot_cpu_has_bug(X86_BUG_L1TF)); + shadow_nonpresent_or_rsvd_lower_gfn_mask = GENMASK_ULL(low_phys_bits - 1, PAGE_SHIFT); }

From: Paolo Bonzini pbonzini@redhat.com

[ Upstream commit d43e2675e96fc6ae1a633b6a69d296394448cc32 ]

KVM stores the gfn in MMIO SPTEs as a caching optimization. These are split in two parts, as in "[high 11111 low]", to thwart any attempt to use these bits in an L1TF attack. This works as long as there are 5 free bits between MAXPHYADDR and bit 50 (inclusive), leaving bit 51 free so that the MMIO access triggers a reserved-bit-set page fault.

The bit positions however were computed wrongly for AMD processors that have encryption support. In this case, x86_phys_bits is reduced (for example from 48 to 43, to account for the C bit at position 47 and four bits used internally to store the SEV ASID and other stuff) while x86_cache_bits in would remain set to 48, and _all_ bits between the reduced MAXPHYADDR and bit 51 are set. Then low_phys_bits would also cover some of the bits that are set in the shadow_mmio_value, terribly confusing the gfn caching mechanism.

To fix this, avoid splitting gfns as long as the processor does not have the L1TF bug (which includes all AMD processors). When there is no splitting, low_phys_bits can be set to the reduced MAXPHYADDR removing the overlap. This fixes "npt=0" operation on EPYC processors.

Thanks to Maxim Levitsky for bisecting this bug.

Cc: stable@vger.kernel.org Fixes: 52918ed5fcf0 ("KVM: SVM: Override default MMIO mask if memory encryption is enabled") Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/x86/kvm/mmu.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index ac0a794267d4..18632f15b29f 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -294,6 +294,8 @@ kvm_mmu_calc_root_page_role(struct kvm_vcpu *vcpu); void kvm_mmu_set_mmio_spte_mask(u64 mmio_mask, u64 mmio_value) { BUG_ON((mmio_mask & mmio_value) != mmio_value); + WARN_ON(mmio_value & (shadow_nonpresent_or_rsvd_mask << shadow_nonpresent_or_rsvd_mask_len)); + WARN_ON(mmio_value & shadow_nonpresent_or_rsvd_lower_gfn_mask); shadow_mmio_value = mmio_value | SPTE_SPECIAL_MASK; shadow_mmio_mask = mmio_mask | SPTE_SPECIAL_MASK; } @@ -486,16 +488,15 @@ static void kvm_mmu_reset_all_pte_masks(void) * the most significant bits of legal physical address space. */ shadow_nonpresent_or_rsvd_mask = 0; - low_phys_bits = boot_cpu_data.x86_cache_bits; - if (boot_cpu_data.x86_cache_bits < - 52 - shadow_nonpresent_or_rsvd_mask_len) { + low_phys_bits = boot_cpu_data.x86_phys_bits; + if (boot_cpu_has_bug(X86_BUG_L1TF) && + !WARN_ON_ONCE(boot_cpu_data.x86_cache_bits >= + 52 - shadow_nonpresent_or_rsvd_mask_len)) { + low_phys_bits = boot_cpu_data.x86_cache_bits + - shadow_nonpresent_or_rsvd_mask_len; shadow_nonpresent_or_rsvd_mask = - rsvd_bits(boot_cpu_data.x86_cache_bits - - shadow_nonpresent_or_rsvd_mask_len, - boot_cpu_data.x86_cache_bits - 1); - low_phys_bits -= shadow_nonpresent_or_rsvd_mask_len; - } else - WARN_ON_ONCE(boot_cpu_has_bug(X86_BUG_L1TF)); + rsvd_bits(low_phys_bits, boot_cpu_data.x86_cache_bits - 1); + }

shadow_nonpresent_or_rsvd_lower_gfn_mask = GENMASK_ULL(low_phys_bits - 1, PAGE_SHIFT);

From: Thomas Lendacky Thomas.Lendacky@amd.com

[ Upstream commit 20c3a2c33e9fdc82e9e8e8d2a6445b3256d20191 ]

Different AMD processors may have different implementations of STIBP. When STIBP is conditionally enabled, some implementations would benefit from having STIBP always on instead of toggling the STIBP bit through MSR writes. This preference is advertised through a CPUID feature bit.

When conditional STIBP support is requested at boot and the CPU advertises STIBP always-on mode as preferred, switch to STIBP "on" support. To show that this transition has occurred, create a new spectre_v2_user_mitigation value and a new spectre_v2_user_strings message. The new mitigation value is used in spectre_v2_user_select_mitigation() to print the new mitigation message as well as to return a new string from stibp_state().

Signed-off-by: Tom Lendacky thomas.lendacky@amd.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Cc: Andrea Arcangeli aarcange@redhat.com Cc: Konrad Rzeszutek Wilk konrad.wilk@oracle.com Cc: Jiri Kosina jkosina@suse.cz Cc: Borislav Petkov bp@alien8.de Cc: Tim Chen tim.c.chen@linux.intel.com Cc: David Woodhouse dwmw@amazon.co.uk Link: https://lkml.kernel.org/r/20181213230352.6937.74943.stgit@tlendack-t1.amdoff... Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/nospec-branch.h | 1 + arch/x86/kernel/cpu/bugs.c | 28 ++++++++++++++++++++++------ 3 files changed, 24 insertions(+), 6 deletions(-)

diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h index 9f03ac233566..f7f9604b10cc 100644 --- a/arch/x86/include/asm/cpufeatures.h +++ b/arch/x86/include/asm/cpufeatures.h @@ -291,6 +291,7 @@ #define X86_FEATURE_AMD_IBPB (13*32+12) /* "" Indirect Branch Prediction Barrier */ #define X86_FEATURE_AMD_IBRS (13*32+14) /* "" Indirect Branch Restricted Speculation */ #define X86_FEATURE_AMD_STIBP (13*32+15) /* "" Single Thread Indirect Branch Predictors */ +#define X86_FEATURE_AMD_STIBP_ALWAYS_ON (13*32+17) /* "" Single Thread Indirect Branch Predictors always-on preferred */ #define X86_FEATURE_AMD_SSBD (13*32+24) /* "" Speculative Store Bypass Disable */ #define X86_FEATURE_VIRT_SSBD (13*32+25) /* Virtualized Speculative Store Bypass Disable */ #define X86_FEATURE_AMD_SSB_NO (13*32+26) /* "" Speculative Store Bypass is fixed in hardware. */ diff --git a/arch/x86/include/asm/nospec-branch.h b/arch/x86/include/asm/nospec-branch.h index 09c7466c4880..e3f70c60e8cc 100644 --- a/arch/x86/include/asm/nospec-branch.h +++ b/arch/x86/include/asm/nospec-branch.h @@ -232,6 +232,7 @@ enum spectre_v2_mitigation { enum spectre_v2_user_mitigation { SPECTRE_V2_USER_NONE, SPECTRE_V2_USER_STRICT, + SPECTRE_V2_USER_STRICT_PREFERRED, SPECTRE_V2_USER_PRCTL, SPECTRE_V2_USER_SECCOMP, }; diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 0e515f9be10f..821dfa3df2b0 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -633,10 +633,11 @@ enum spectre_v2_user_cmd { };

static const char * const spectre_v2_user_strings[] = { - [SPECTRE_V2_USER_NONE] = "User space: Vulnerable", - [SPECTRE_V2_USER_STRICT] = "User space: Mitigation: STIBP protection", - [SPECTRE_V2_USER_PRCTL] = "User space: Mitigation: STIBP via prctl", - [SPECTRE_V2_USER_SECCOMP] = "User space: Mitigation: STIBP via seccomp and prctl", + [SPECTRE_V2_USER_NONE] = "User space: Vulnerable", + [SPECTRE_V2_USER_STRICT] = "User space: Mitigation: STIBP protection", + [SPECTRE_V2_USER_STRICT_PREFERRED] = "User space: Mitigation: STIBP always-on protection", + [SPECTRE_V2_USER_PRCTL] = "User space: Mitigation: STIBP via prctl", + [SPECTRE_V2_USER_SECCOMP] = "User space: Mitigation: STIBP via seccomp and prctl", };

static const struct { @@ -726,6 +727,15 @@ spectre_v2_user_select_mitigation(enum spectre_v2_mitigation_cmd v2_cmd) break; }

+ /* + * At this point, an STIBP mode other than "off" has been set. + * If STIBP support is not being forced, check if STIBP always-on + * is preferred. + */ + if (mode != SPECTRE_V2_USER_STRICT && + boot_cpu_has(X86_FEATURE_AMD_STIBP_ALWAYS_ON)) + mode = SPECTRE_V2_USER_STRICT_PREFERRED; + /* Initialize Indirect Branch Prediction Barrier */ if (boot_cpu_has(X86_FEATURE_IBPB)) { setup_force_cpu_cap(X86_FEATURE_USE_IBPB); @@ -1001,6 +1011,7 @@ void arch_smt_update(void) case SPECTRE_V2_USER_NONE: break; case SPECTRE_V2_USER_STRICT: + case SPECTRE_V2_USER_STRICT_PREFERRED: update_stibp_strict(); break; case SPECTRE_V2_USER_PRCTL: @@ -1235,7 +1246,8 @@ static int ib_prctl_set(struct task_struct *task, unsigned long ctrl) * Indirect branch speculation is always disabled in strict * mode. */ - if (spectre_v2_user == SPECTRE_V2_USER_STRICT) + if (spectre_v2_user == SPECTRE_V2_USER_STRICT || + spectre_v2_user == SPECTRE_V2_USER_STRICT_PREFERRED) return -EPERM; task_clear_spec_ib_disable(task); task_update_spec_tif(task); @@ -1248,7 +1260,8 @@ static int ib_prctl_set(struct task_struct *task, unsigned long ctrl) */ if (spectre_v2_user == SPECTRE_V2_USER_NONE) return -EPERM; - if (spectre_v2_user == SPECTRE_V2_USER_STRICT) + if (spectre_v2_user == SPECTRE_V2_USER_STRICT || + spectre_v2_user == SPECTRE_V2_USER_STRICT_PREFERRED) return 0; task_set_spec_ib_disable(task); if (ctrl == PR_SPEC_FORCE_DISABLE) @@ -1319,6 +1332,7 @@ static int ib_prctl_get(struct task_struct *task) return PR_SPEC_PRCTL | PR_SPEC_DISABLE; return PR_SPEC_PRCTL | PR_SPEC_ENABLE; case SPECTRE_V2_USER_STRICT: + case SPECTRE_V2_USER_STRICT_PREFERRED: return PR_SPEC_DISABLE; default: return PR_SPEC_NOT_AFFECTED; @@ -1566,6 +1580,8 @@ static char *stibp_state(void) return ", STIBP: disabled"; case SPECTRE_V2_USER_STRICT: return ", STIBP: forced"; + case SPECTRE_V2_USER_STRICT_PREFERRED: + return ", STIBP: always-on"; case SPECTRE_V2_USER_PRCTL: case SPECTRE_V2_USER_SECCOMP: if (static_key_enabled(&switch_to_cond_stibp))

From: Anthony Steinhauser asteinhauser@google.com

[ Upstream commit 4d8df8cbb9156b0a0ab3f802b80cb5db57acc0bf ]

Currently, it is possible to enable indirect branch speculation even after it was force-disabled using the PR_SPEC_FORCE_DISABLE option. Moreover, the PR_GET_SPECULATION_CTRL command gives afterwards an incorrect result (force-disabled when it is in fact enabled). This also is inconsistent vs. STIBP and the documention which cleary states that PR_SPEC_FORCE_DISABLE cannot be undone.

Fix this by actually enforcing force-disabled indirect branch speculation. PR_SPEC_ENABLE called after PR_SPEC_FORCE_DISABLE now fails with -EPERM as described in the documentation.

Fixes: 9137bb27e60e ("x86/speculation: Add prctl() control for indirect branch speculation") Signed-off-by: Anthony Steinhauser asteinhauser@google.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/x86/kernel/cpu/bugs.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index f984a15faa70..54ec900bd259 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -1251,11 +1251,14 @@ static int ib_prctl_set(struct task_struct *task, unsigned long ctrl) return 0; /* * Indirect branch speculation is always disabled in strict - * mode. + * mode. It can neither be enabled if it was force-disabled + * by a previous prctl call. + */ if (spectre_v2_user_ibpb == SPECTRE_V2_USER_STRICT || spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT || - spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED) + spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED || + task_spec_ib_force_disable(task)) return -EPERM; task_clear_spec_ib_disable(task); task_update_spec_tif(task);

From: Lukas Wunner lukas@wunner.de

[ Upstream commit 84855678add8aba927faf76bc2f130a40f94b6f7 ]

When an SPI controller unregisters, it unbinds all its slave devices. For this, their drivers may need to access the SPI bus, e.g. to quiesce interrupts.

However since commit ffbbdd21329f ("spi: create a message queueing infrastructure"), spi_destroy_queue() is executed before unbinding the slaves. It sets ctlr->running = false, thereby preventing SPI bus access and causing unbinding of slave devices to fail.

Fix by unbinding slaves before calling spi_destroy_queue().

Fixes: ffbbdd21329f ("spi: create a message queueing infrastructure") Signed-off-by: Lukas Wunner lukas@wunner.de Cc: stable@vger.kernel.org # v3.4+ Cc: Linus Walleij linus.walleij@linaro.org Link: https://lore.kernel.org/r/8aaf9d44c153fe233b17bc2dec4eb679898d7e7b.158955752... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/spi/spi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 05a57147b033..b8b9f6d88016 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -2306,6 +2306,8 @@ void spi_unregister_controller(struct spi_controller *ctlr) struct spi_controller *found; int id = ctlr->bus_num;

+ device_for_each_child(&ctlr->dev, NULL, __unregister); + /* First make sure that this controller was ever added */ mutex_lock(&board_lock); found = idr_find(&spi_master_idr, id); @@ -2318,7 +2320,6 @@ void spi_unregister_controller(struct spi_controller *ctlr) list_del(&ctlr->list); mutex_unlock(&board_lock);

- device_for_each_child(&ctlr->dev, NULL, __unregister); device_unregister(&ctlr->dev); /* free bus id */ mutex_lock(&board_lock);

From: Lukas Wunner lukas@wunner.de

[ Upstream commit 9dd277ff92d06f6aa95b39936ad83981d781f49b ]

The BCM2835 SPI driver uses devm_spi_register_controller() on bind. As a consequence, on unbind, __device_release_driver() first invokes bcm2835_spi_remove() before unregistering the SPI controller via devres_release_all().

This order is incorrect: bcm2835_spi_remove() tears down the DMA channels and turns off the SPI controller, including its interrupts and clock. The SPI controller is thus no longer usable.

When the SPI controller is subsequently unregistered, it unbinds all its slave devices. If their drivers need to access the SPI bus, e.g. to quiesce their interrupts, unbinding will fail.

As a rule, devm_spi_register_controller() must not be used if the ->remove() hook performs teardown steps which shall be performed after unbinding of slaves.

Fix by using the non-devm variant spi_register_controller(). Note that the struct spi_controller as well as the driver-private data are not freed until after bcm2835_spi_remove() has finished, so accessing them is safe.

Fixes: 247263dba208 ("spi: bcm2835: use devm_spi_register_master()") Signed-off-by: Lukas Wunner lukas@wunner.de Cc: stable@vger.kernel.org # v3.13+ Link: https://lore.kernel.org/r/2397dd70cdbe95e0bc4da2b9fca0f31cb94e5aed.158955752... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/spi/spi-bcm2835.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index eab27d41ba83..df6abc75bc16 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -793,7 +793,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev) goto out_clk_disable; }

- err = devm_spi_register_master(&pdev->dev, master); + err = spi_register_master(master); if (err) { dev_err(&pdev->dev, "could not register SPI master: %d\n", err); goto out_clk_disable; @@ -813,6 +813,8 @@ static int bcm2835_spi_remove(struct platform_device *pdev) struct spi_master *master = platform_get_drvdata(pdev); struct bcm2835_spi *bs = spi_master_get_devdata(master);

+ spi_unregister_master(master); + /* Clear FIFOs, and disable the HW block */ bcm2835_wr(bs, BCM2835_SPI_CS, BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);

From: Lukas Wunner lukas@wunner.de

[ Upstream commit 65e318e17358a3fd4fcb5a69d89b14016dee2f06 ]

The PXA2xx SPI driver releases a runtime PM ref in the probe error path even though it hasn't acquired a ref earlier.

Apparently commit e2b714afee32 ("spi: pxa2xx: Disable runtime PM if controller registration fails") sought to copy-paste the invocation of pm_runtime_disable() from pxa2xx_spi_remove(), but erroneously copied the call to pm_runtime_put_noidle() as well. Drop it.

Fixes: e2b714afee32 ("spi: pxa2xx: Disable runtime PM if controller registration fails") Signed-off-by: Lukas Wunner lukas@wunner.de Reviewed-by: Jarkko Nikula jarkko.nikula@linux.intel.com Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Cc: stable@vger.kernel.org # v4.17+ Cc: Jarkko Nikula jarkko.nikula@linux.intel.com Link: https://lore.kernel.org/r/58b2ac6942ca1f91aaeeafe512144bc5343e1d84.159040849... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/spi/spi-pxa2xx.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 6551188fea23..2525fd9c8aa4 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1748,7 +1748,6 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) return status;

out_error_pm_runtime_enabled: - pm_runtime_put_noidle(&pdev->dev); pm_runtime_disable(&pdev->dev);

out_error_clock_enabled:

From: "Longpeng(Mike)" longpeng2@huawei.com

[ Upstream commit b02989f37fc5e865ceeee9070907e4493b3a21e2 ]

The system will crash when the users insmod crypto/tcrypt.ko with mode=38 ( testing "cts(cbc(aes))" ).

Usually the next entry of one sg will be @sg@ + 1, but if this sg element is part of a chained scatterlist, it could jump to the start of a new scatterlist array. Fix it by sg_next() on calculation of src/dst scatterlist.

Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver") Reported-by: LABBE Corentin clabbe@baylibre.com Cc: Herbert Xu herbert@gondor.apana.org.au Cc: "Michael S. Tsirkin" mst@redhat.com Cc: Jason Wang jasowang@redhat.com Cc: "David S. Miller" davem@davemloft.net Cc: virtualization@lists.linux-foundation.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200123101000.GB24255@Red Signed-off-by: Gonglei arei.gonglei@huawei.com Signed-off-by: Longpeng(Mike) longpeng2@huawei.com Link: https://lore.kernel.org/r/20200602070501.2023-2-longpeng2@huawei.com Signed-off-by: Michael S. Tsirkin mst@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/crypto/virtio/virtio_crypto_algs.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/crypto/virtio/virtio_crypto_algs.c b/drivers/crypto/virtio/virtio_crypto_algs.c index 9348060cc32f..e9a8485c4929 100644 --- a/drivers/crypto/virtio/virtio_crypto_algs.c +++ b/drivers/crypto/virtio/virtio_crypto_algs.c @@ -367,13 +367,18 @@ __virtio_crypto_ablkcipher_do_req(struct virtio_crypto_sym_request *vc_sym_req, int err; unsigned long flags; struct scatterlist outhdr, iv_sg, status_sg, **sgs; - int i; u64 dst_len; unsigned int num_out = 0, num_in = 0; int sg_total; uint8_t *iv; + struct scatterlist *sg;

src_nents = sg_nents_for_len(req->src, req->nbytes); + if (src_nents < 0) { + pr_err("Invalid number of src SG.\n"); + return src_nents; + } + dst_nents = sg_nents(req->dst);

pr_debug("virtio_crypto: Number of sgs (src_nents: %d, dst_nents: %d)\n", @@ -459,12 +464,12 @@ __virtio_crypto_ablkcipher_do_req(struct virtio_crypto_sym_request *vc_sym_req, vc_sym_req->iv = iv;

/* Source data */ - for (i = 0; i < src_nents; i++) - sgs[num_out++] = &req->src[i]; + for (sg = req->src; src_nents; sg = sg_next(sg), src_nents--) + sgs[num_out++] = sg;

/* Destination data */ - for (i = 0; i < dst_nents; i++) - sgs[num_out + num_in++] = &req->dst[i]; + for (sg = req->dst; sg; sg = sg_next(sg)) + sgs[num_out + num_in++] = sg;

/* Status */ sg_init_one(&status_sg, &vc_req->status, sizeof(vc_req->status));

From: tannerlove tannerlove@google.com

[ Upstream commit 865a6cbb2288f8af7f9dc3b153c61b7014fdcf1e ]

getopt_long requires the last element to be filled with zeros. Otherwise, passing an unrecognized option can cause a segfault.

Fixes: 16e781224198 ("selftests/net: Add a test to validate behavior of rx timestamps") Signed-off-by: Tanner Love tannerlove@google.com Acked-by: Willem de Bruijn willemb@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- tools/testing/selftests/networking/timestamping/rxtimestamp.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/networking/timestamping/rxtimestamp.c b/tools/testing/selftests/networking/timestamping/rxtimestamp.c index dd4162fc0419..7a573fb4c1c4 100644 --- a/tools/testing/selftests/networking/timestamping/rxtimestamp.c +++ b/tools/testing/selftests/networking/timestamping/rxtimestamp.c @@ -114,6 +114,7 @@ static struct option long_options[] = { { "tcp", no_argument, 0, 't' }, { "udp", no_argument, 0, 'u' }, { "ip", no_argument, 0, 'i' }, + { NULL, 0, NULL, 0 }, };

static int next_port = 19999;

From: "Eric W. Biederman" ebiederm@xmission.com

commit ef1548adada51a2f32ed7faef50aa465e1b4c5da upstream.

Recently syzbot reported that unmounting proc when there is an ongoing inotify watch on the root directory of proc could result in a use after free when the watch is removed after the unmount of proc when the watcher exits.

Commit 69879c01a0c3 ("proc: Remove the now unnecessary internal mount of proc") made it easier to unmount proc and allowed syzbot to see the problem, but looking at the code it has been around for a long time.

Looking at the code the fsnotify watch should have been removed by fsnotify_sb_delete in generic_shutdown_super. Unfortunately the inode was allocated with new_inode_pseudo instead of new_inode so the inode was not on the sb->s_inodes list. Which prevented fsnotify_unmount_inodes from finding the inode and removing the watch as well as made it so the "VFS: Busy inodes after unmount" warning could not find the inodes to warn about them.

Make all of the inodes in proc visible to generic_shutdown_super, and fsnotify_sb_delete by using new_inode instead of new_inode_pseudo. The only functional difference is that new_inode places the inodes on the sb->s_inodes list.

I wrote a small test program and I can verify that without changes it can trigger this issue, and by replacing new_inode_pseudo with new_inode the issues goes away.

Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/000000000000d788c905a7dfa3f4@google.com Reported-by: syzbot+7d2debdcdb3cb93c1e5e@syzkaller.appspotmail.com Fixes: 0097875bd415 ("proc: Implement /proc/thread-self to point at the directory of the current thread") Fixes: 021ada7dff22 ("procfs: switch /proc/self away from proc_dir_entry") Fixes: 51f0885e5415 ("vfs,proc: guarantee unique inodes in /proc") Signed-off-by: "Eric W. Biederman" ebiederm@xmission.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- fs/proc/inode.c | 2 +- fs/proc/self.c | 2 +- fs/proc/thread_self.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/proc/inode.c b/fs/proc/inode.c index fc5306a31a1d..31bf3bb8ddae 100644 --- a/fs/proc/inode.c +++ b/fs/proc/inode.c @@ -451,7 +451,7 @@ const struct inode_operations proc_link_inode_operations = {

struct inode *proc_get_inode(struct super_block *sb, struct proc_dir_entry *de) { - struct inode *inode = new_inode_pseudo(sb); + struct inode *inode = new_inode(sb);

if (inode) { inode->i_ino = de->low_ino; diff --git a/fs/proc/self.c b/fs/proc/self.c index 127265e5c55f..cc6d4253399d 100644 --- a/fs/proc/self.c +++ b/fs/proc/self.c @@ -42,7 +42,7 @@ int proc_setup_self(struct super_block *s) inode_lock(root_inode); self = d_alloc_name(s->s_root, "self"); if (self) { - struct inode *inode = new_inode_pseudo(s); + struct inode *inode = new_inode(s); if (inode) { inode->i_ino = self_inum; inode->i_mtime = inode->i_atime = inode->i_ctime = current_time(inode); diff --git a/fs/proc/thread_self.c b/fs/proc/thread_self.c index b905010ca9eb..ed009aa135dd 100644 --- a/fs/proc/thread_self.c +++ b/fs/proc/thread_self.c @@ -42,7 +42,7 @@ int proc_setup_thread_self(struct super_block *s) inode_lock(root_inode); thread_self = d_alloc_name(s->s_root, "thread-self"); if (thread_self) { - struct inode *inode = new_inode_pseudo(s); + struct inode *inode = new_inode(s); if (inode) { inode->i_ino = thread_self_inum; inode->i_mtime = inode->i_atime = inode->i_ctime = current_time(inode);

From: Paolo Bonzini pbonzini@redhat.com

commit a3535be731c2a343912578465021f50937f7b099 upstream.

Async page faults have to be trapped in the host (L1 in this case), since the APF reason was passed from L0 to L1 and stored in the L1 APF data page. This was completely reversed: the page faults were passed to the guest, a L2 hypervisor.

Cc: stable@vger.kernel.org Reviewed-by: Sean Christopherson sean.j.christopherson@intel.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/x86/kvm/svm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 226db3dc490b..7fe9b60b2a36 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -3229,8 +3229,8 @@ static int nested_svm_exit_special(struct vcpu_svm *svm) return NESTED_EXIT_HOST; break; case SVM_EXIT_EXCP_BASE + PF_VECTOR: - /* When we're shadowing, trap PFs, but not async PF */ - if (!npt_enabled && svm->vcpu.arch.apf.host_apf_reason == 0) + /* Trap async PF even if not shadowing */ + if (!npt_enabled || svm->vcpu.arch.apf.host_apf_reason) return NESTED_EXIT_HOST; break; default:

From: Sean Christopherson sean.j.christopherson@intel.com

commit 2ebac8bb3c2d35f5135466490fc8eeaf3f3e2d37 upstream.

Consult only the basic exit reason, i.e. bits 15:0 of vmcs.EXIT_REASON, when determining whether a nested VM-Exit should be reflected into L1 or handled by KVM in L0.

For better or worse, the switch statement in nested_vmx_exit_reflected() currently defaults to "true", i.e. reflects any nested VM-Exit without dedicated logic. Because the case statements only contain the basic exit reason, any VM-Exit with modifier bits set will be reflected to L1, even if KVM intended to handle it in L0.

Practically speaking, this only affects EXIT_REASON_MCE_DURING_VMENTRY, i.e. a #MC that occurs on nested VM-Enter would be incorrectly routed to L1, as "failed VM-Entry" is the only modifier that KVM can currently encounter. The SMM modifiers will never be generated as KVM doesn't support/employ a SMI Transfer Monitor. Ditto for "exit from enclave", as KVM doesn't yet support virtualizing SGX, i.e. it's impossible to enter an enclave in a KVM guest (L1 or L2).

Fixes: 644d711aa0e1 ("KVM: nVMX: Deciding if L0 or L1 should handle an L2 exit") Cc: Jim Mattson jmattson@google.com Cc: Xiaoyao Li xiaoyao.li@intel.com Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson sean.j.christopherson@intel.com Message-Id: 20200227174430.26371-1-sean.j.christopherson@intel.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/x86/kvm/vmx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index f08c287b6242..2c4baff7553b 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -9683,7 +9683,7 @@ static bool nested_vmx_exit_reflected(struct kvm_vcpu *vcpu, u32 exit_reason) vmcs_read32(VM_EXIT_INTR_ERROR_CODE), KVM_ISA_VMX);

- switch (exit_reason) { + switch ((u16)exit_reason) { case EXIT_REASON_EXCEPTION_NMI: if (is_nmi(intr_info)) return false;

From: Xing Li lixing@loongson.cn

commit 5816c76dea116a458f1932eefe064e35403248eb upstream.

If a CPU support more than 32bit vmbits (which is true for 64bit CPUs), VPN2_MASK set to fixed 0xffffe000 will lead to a wrong EntryHi in some functions such as _kvm_mips_host_tlb_inv().

The cpu_vmbits definition of 32bit CPU in cpu-features.h is 31, so we still use the old definition.

Cc: Stable stable@vger.kernel.org Reviewed-by: Aleksandar Markovic aleksandar.qemu.devel@gmail.com Signed-off-by: Xing Li lixing@loongson.cn [Huacai: Improve commit messages] Signed-off-by: Huacai Chen chenhc@lemote.com Message-Id: 1590220602-3547-3-git-send-email-chenhc@lemote.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/mips/include/asm/kvm_host.h | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h index b9f0c902c749..2b3fdfc9e0e7 100644 --- a/arch/mips/include/asm/kvm_host.h +++ b/arch/mips/include/asm/kvm_host.h @@ -274,7 +274,11 @@ enum emulation_result { #define MIPS3_PG_SHIFT 6 #define MIPS3_PG_FRAME 0x3fffffc0

+#if defined(CONFIG_64BIT) +#define VPN2_MASK GENMASK(cpu_vmbits - 1, 13) +#else #define VPN2_MASK 0xffffe000 +#endif #define KVM_ENTRYHI_ASID cpu_asid_mask(&boot_cpu_data) #define TLB_IS_GLOBAL(x) ((x).tlb_lo[0] & (x).tlb_lo[1] & ENTRYLO_G) #define TLB_VPN2(x) ((x).tlb_hi & VPN2_MASK)

From: Sumit Saxena sumit.saxena@broadcom.com

commit 6fd8525a70221c26823b1c7e912fb21f218fb0c5 upstream.

When TM command times out, driver invokes the controller reset. Post reset, driver re-fires pended TM commands which leads to firmware crash.

Post controller reset, return pended TM commands back to OS.

Link: https://lore.kernel.org/r/20200508085242.23406-1-chandrakanth.patil@broadcom... Cc: stable@vger.kernel.org Signed-off-by: Sumit Saxena sumit.saxena@broadcom.com Signed-off-by: Chandrakanth Patil chandrakanth.patil@broadcom.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/scsi/megaraid/megaraid_sas_fusion.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 81bd824bb9d9..bdb12bf0d5c7 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -3940,6 +3940,7 @@ void megasas_refire_mgmt_cmd(struct megasas_instance *instance) struct fusion_context *fusion; struct megasas_cmd *cmd_mfi; union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc; + struct MPI2_RAID_SCSI_IO_REQUEST *scsi_io_req; u16 smid; bool refire_cmd = 0; u8 result; @@ -3990,6 +3991,11 @@ void megasas_refire_mgmt_cmd(struct megasas_instance *instance) break; }

+ scsi_io_req = (struct MPI2_RAID_SCSI_IO_REQUEST *) + cmd_fusion->io_request; + if (scsi_io_req->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) + result = RETURN_CMD; + switch (result) { case REFIRE_CMD: megasas_fire_cmd_fusion(instance, req_desc); @@ -4187,7 +4193,6 @@ megasas_issue_tm(struct megasas_instance *instance, u16 device_handle, if (!timeleft) { dev_err(&instance->pdev->dev, "task mgmt type 0x%x timed out\n", type); - cmd_mfi->flags |= DRV_DCMD_SKIP_REFIRE; mutex_unlock(&instance->reset_mutex); rc = megasas_reset_fusion(instance->host, MFI_IO_TIMEOUT_OCR); mutex_lock(&instance->reset_mutex);

From: Qiujun Huang hqjagain@gmail.com

commit e4ff08a4d727146bb6717a39a8d399d834654345 upstream.

Write out of slab bounds. We should check epid.

The case reported by syzbot: https://lore.kernel.org/linux-usb/0000000000006ac55b05a1c05d72@google.com BUG: KASAN: use-after-free in htc_process_conn_rsp drivers/net/wireless/ath/ath9k/htc_hst.c:131 [inline] BUG: KASAN: use-after-free in ath9k_htc_rx_msg+0xa25/0xaf0 drivers/net/wireless/ath/ath9k/htc_hst.c:443 Write of size 2 at addr ffff8881cea291f0 by task swapper/1/0

Call Trace: htc_process_conn_rsp drivers/net/wireless/ath/ath9k/htc_hst.c:131 [inline] ath9k_htc_rx_msg+0xa25/0xaf0 drivers/net/wireless/ath/ath9k/htc_hst.c:443 ath9k_hif_usb_reg_in_cb+0x1ba/0x630 drivers/net/wireless/ath/ath9k/hif_usb.c:718 __usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786

Reported-and-tested-by: syzbot+b1c61e5f11be5782f192@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang hqjagain@gmail.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20200404041838.10426-4-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/wireless/ath/ath9k/htc_hst.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c index d091c8ebdcf0..f705f0e1cb5b 100644 --- a/drivers/net/wireless/ath/ath9k/htc_hst.c +++ b/drivers/net/wireless/ath/ath9k/htc_hst.c @@ -113,6 +113,9 @@ static void htc_process_conn_rsp(struct htc_target *target,

if (svc_rspmsg->status == HTC_SERVICE_SUCCESS) { epid = svc_rspmsg->endpoint_id; + if (epid < 0 || epid >= ENDPOINT_MAX) + return; + service_id = be16_to_cpu(svc_rspmsg->service_id); max_msglen = be16_to_cpu(svc_rspmsg->max_msg_len); endpoint = &target->endpoint[epid];

From: Qiujun Huang hqjagain@gmail.com

commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream.

In ath9k_hif_usb_rx_cb interface number is assumed to be 0. usb_ifnum_to_if(urb->dev, 0) But it isn't always true.

The case reported by syzbot: https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com usb 2-1: new high-speed USB device number 2 using dummy_hcd usb 2-1: config 1 has an invalid interface number: 2 but max is 0 usb 2-1: config 1 has no interface number 0 usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 general protection fault, probably for non-canonical address 0xdffffc0000000015: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0

Call Trace __usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 __do_softirq+0x21e/0x950 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x178/0x1a0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:546 [inline] smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829

Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang hqjagain@gmail.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/wireless/ath/ath9k/hif_usb.c | 48 ++++++++++++++++++------ drivers/net/wireless/ath/ath9k/hif_usb.h | 5 +++ 2 files changed, 42 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 6049d3766c64..4ed21dad6a8e 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -643,9 +643,9 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,

static void ath9k_hif_usb_rx_cb(struct urb *urb) { - struct sk_buff *skb = (struct sk_buff *) urb->context; - struct hif_device_usb *hif_dev = - usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); + struct rx_buf *rx_buf = (struct rx_buf *)urb->context; + struct hif_device_usb *hif_dev = rx_buf->hif_dev; + struct sk_buff *skb = rx_buf->skb; int ret;

if (!skb) @@ -685,14 +685,15 @@ static void ath9k_hif_usb_rx_cb(struct urb *urb) return; free: kfree_skb(skb); + kfree(rx_buf); }

static void ath9k_hif_usb_reg_in_cb(struct urb *urb) { - struct sk_buff *skb = (struct sk_buff *) urb->context; + struct rx_buf *rx_buf = (struct rx_buf *)urb->context; + struct hif_device_usb *hif_dev = rx_buf->hif_dev; + struct sk_buff *skb = rx_buf->skb; struct sk_buff *nskb; - struct hif_device_usb *hif_dev = - usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); int ret;

if (!skb) @@ -750,6 +751,7 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb) return; free: kfree_skb(skb); + kfree(rx_buf); urb->context = NULL; }

@@ -795,7 +797,7 @@ static int ath9k_hif_usb_alloc_tx_urbs(struct hif_device_usb *hif_dev) init_usb_anchor(&hif_dev->mgmt_submitted);

for (i = 0; i < MAX_TX_URB_NUM; i++) { - tx_buf = kzalloc(sizeof(struct tx_buf), GFP_KERNEL); + tx_buf = kzalloc(sizeof(*tx_buf), GFP_KERNEL); if (!tx_buf) goto err;

@@ -832,8 +834,9 @@ static void ath9k_hif_usb_dealloc_rx_urbs(struct hif_device_usb *hif_dev)

static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev) { - struct urb *urb = NULL; + struct rx_buf *rx_buf = NULL; struct sk_buff *skb = NULL; + struct urb *urb = NULL; int i, ret;

init_usb_anchor(&hif_dev->rx_submitted); @@ -841,6 +844,12 @@ static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)

for (i = 0; i < MAX_RX_URB_NUM; i++) {

+ rx_buf = kzalloc(sizeof(*rx_buf), GFP_KERNEL); + if (!rx_buf) { + ret = -ENOMEM; + goto err_rxb; + } + /* Allocate URB */ urb = usb_alloc_urb(0, GFP_KERNEL); if (urb == NULL) { @@ -855,11 +864,14 @@ static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev) goto err_skb; }

+ rx_buf->hif_dev = hif_dev; + rx_buf->skb = skb; + usb_fill_bulk_urb(urb, hif_dev->udev, usb_rcvbulkpipe(hif_dev->udev, USB_WLAN_RX_PIPE), skb->data, MAX_RX_BUF_SIZE, - ath9k_hif_usb_rx_cb, skb); + ath9k_hif_usb_rx_cb, rx_buf);

/* Anchor URB */ usb_anchor_urb(urb, &hif_dev->rx_submitted); @@ -885,6 +897,8 @@ static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev) err_skb: usb_free_urb(urb); err_urb: + kfree(rx_buf); +err_rxb: ath9k_hif_usb_dealloc_rx_urbs(hif_dev); return ret; } @@ -896,14 +910,21 @@ static void ath9k_hif_usb_dealloc_reg_in_urbs(struct hif_device_usb *hif_dev)

static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev) { - struct urb *urb = NULL; + struct rx_buf *rx_buf = NULL; struct sk_buff *skb = NULL; + struct urb *urb = NULL; int i, ret;

init_usb_anchor(&hif_dev->reg_in_submitted);

for (i = 0; i < MAX_REG_IN_URB_NUM; i++) {

+ rx_buf = kzalloc(sizeof(*rx_buf), GFP_KERNEL); + if (!rx_buf) { + ret = -ENOMEM; + goto err_rxb; + } + /* Allocate URB */ urb = usb_alloc_urb(0, GFP_KERNEL); if (urb == NULL) { @@ -918,11 +939,14 @@ static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev) goto err_skb; }

+ rx_buf->hif_dev = hif_dev; + rx_buf->skb = skb; + usb_fill_int_urb(urb, hif_dev->udev, usb_rcvintpipe(hif_dev->udev, USB_REG_IN_PIPE), skb->data, MAX_REG_IN_BUF_SIZE, - ath9k_hif_usb_reg_in_cb, skb, 1); + ath9k_hif_usb_reg_in_cb, rx_buf, 1);

/* Anchor URB */ usb_anchor_urb(urb, &hif_dev->reg_in_submitted); @@ -948,6 +972,8 @@ static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev) err_skb: usb_free_urb(urb); err_urb: + kfree(rx_buf); +err_rxb: ath9k_hif_usb_dealloc_reg_in_urbs(hif_dev); return ret; } diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.h b/drivers/net/wireless/ath/ath9k/hif_usb.h index a94e7e1c86e9..5985aa15ca93 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.h +++ b/drivers/net/wireless/ath/ath9k/hif_usb.h @@ -86,6 +86,11 @@ struct tx_buf { struct list_head list; };

+struct rx_buf { + struct sk_buff *skb; + struct hif_device_usb *hif_dev; +}; + #define HIF_USB_TX_STOP BIT(0) #define HIF_USB_TX_FLUSH BIT(1)

From: Ezequiel Garcia ezequiel@collabora.com

commit 0ea2ea42b31abc1141f2fd3911f952a97d401fcb upstream.

We need to keep the reference to the drm_gem_object until the last access by vkms_dumb_create.

Therefore, the put the object after it is used.

This fixes a use-after-free issue reported by syzbot.

While here, change vkms_gem_create() symbol to static.

Reported-and-tested-by: syzbot+e3372a2afe1e7ef04bc7@syzkaller.appspotmail.com Signed-off-by: Ezequiel Garcia ezequiel@collabora.com Reviewed-by: Rodrigo Siqueira Rodrigo.Siqueira@amd.com Signed-off-by: Rodrigo Siqueira rodrigosiqueiramelo@gmail.com Link: https://patchwork.freedesktop.org/patch/msgid/20200427214405.13069-1-ezequie... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/gpu/drm/vkms/vkms_drv.h | 5 ----- drivers/gpu/drm/vkms/vkms_gem.c | 11 ++++++----- 2 files changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h index e018752d57bb..b46c31e25c27 100644 --- a/drivers/gpu/drm/vkms/vkms_drv.h +++ b/drivers/gpu/drm/vkms/vkms_drv.h @@ -62,11 +62,6 @@ int vkms_output_init(struct vkms_device *vkmsdev); struct drm_plane *vkms_plane_init(struct vkms_device *vkmsdev);

/* Gem stuff */ -struct drm_gem_object *vkms_gem_create(struct drm_device *dev, - struct drm_file *file, - u32 *handle, - u64 size); - int vkms_gem_fault(struct vm_fault *vmf);

int vkms_dumb_create(struct drm_file *file, struct drm_device *dev, diff --git a/drivers/gpu/drm/vkms/vkms_gem.c b/drivers/gpu/drm/vkms/vkms_gem.c index ce394009a36c..f731683c932e 100644 --- a/drivers/gpu/drm/vkms/vkms_gem.c +++ b/drivers/gpu/drm/vkms/vkms_gem.c @@ -93,10 +93,10 @@ int vkms_gem_fault(struct vm_fault *vmf) return ret; }

-struct drm_gem_object *vkms_gem_create(struct drm_device *dev, - struct drm_file *file, - u32 *handle, - u64 size) +static struct drm_gem_object *vkms_gem_create(struct drm_device *dev, + struct drm_file *file, + u32 *handle, + u64 size) { struct vkms_gem_object *obj; int ret; @@ -109,7 +109,6 @@ struct drm_gem_object *vkms_gem_create(struct drm_device *dev, return ERR_CAST(obj);

ret = drm_gem_handle_create(file, &obj->gem, handle); - drm_gem_object_put_unlocked(&obj->gem); if (ret) return ERR_PTR(ret);

@@ -138,6 +137,8 @@ int vkms_dumb_create(struct drm_file *file, struct drm_device *dev, args->size = gem_obj->size; args->pitch = pitch;

+ drm_gem_object_put_unlocked(gem_obj); + DRM_DEBUG_DRIVER("Created object of size %lld\n", size);

return 0;

From: Barret Rhoden brho@google.com

commit 2ed6edd33a214bca02bd2b45e3fc3038a059436b upstream.

Under rare circumstances, task_function_call() can repeatedly fail and cause a soft lockup.

There is a slight race where the process is no longer running on the cpu we targeted by the time remote_function() runs. The code will simply try again. If we are very unlucky, this will continue to fail, until a watchdog fires. This can happen in a heavily loaded, multi-core virtual machine.

Reported-by: syzbot+bb4935a5c09b5ff79940@syzkaller.appspotmail.com Signed-off-by: Barret Rhoden brho@google.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Link: https://lkml.kernel.org/r/20200414222920.121401-1-brho@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- kernel/events/core.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c index 250c0c021e4e..30a81d1b7b5c 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -94,11 +94,11 @@ static void remote_function(void *data) * @info: the function call argument * * Calls the function @func when the task is currently running. This might - * be on the current CPU, which just calls the function directly + * be on the current CPU, which just calls the function directly. This will + * retry due to any failures in smp_call_function_single(), such as if the + * task_cpu() goes offline concurrently. * - * returns: @func return value, or - * -ESRCH - when the process isn't running - * -EAGAIN - when the process moved away + * returns @func return value or -ESRCH when the process isn't running */ static int task_function_call(struct task_struct *p, remote_function_f func, void *info) @@ -111,11 +111,16 @@ task_function_call(struct task_struct *p, remote_function_f func, void *info) }; int ret;

- do { - ret = smp_call_function_single(task_cpu(p), remote_function, &data, 1); - if (!ret) - ret = data.ret; - } while (ret == -EAGAIN); + for (;;) { + ret = smp_call_function_single(task_cpu(p), remote_function, + &data, 1); + ret = !ret ? data.ret : -EAGAIN; + + if (ret != -EAGAIN) + break; + + cond_resched(); + }

return ret; }

From: Veerabhadrarao Badiganti vbadigan@codeaurora.org

commit 9253d71011c349d5f5cc0cebdf68b4a80811b92d upstream.

Clear tuning_done flag while executing tuning to ensure vendor specific HS400 settings are applied properly when the controller is re-initialized in HS400 mode.

Without this, re-initialization of the qcom SDHC in HS400 mode fails while resuming the driver from runtime-suspend or system-suspend.

Fixes: ff06ce417828 ("mmc: sdhci-msm: Add HS400 platform support") Cc: stable@vger.kernel.org Signed-off-by: Veerabhadrarao Badiganti vbadigan@codeaurora.org Link: https://lore.kernel.org/r/1590678838-18099-1-git-send-email-vbadigan@codeaur... Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/mmc/host/sdhci-msm.c | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 19ae527ecc72..4cff758767cb 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -1083,6 +1083,12 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode) /* Clock-Data-Recovery used to dynamically adjust RX sampling point */ msm_host->use_cdr = true;

+ /* + * Clear tuning_done flag before tuning to ensure proper + * HS400 settings. + */ + msm_host->tuning_done = 0; + /* * For HS400 tuning in HS200 timing requires: * - select MCLK/2 in VENDOR_SPEC

From: Ulf Hansson ulf.hansson@linaro.org

commit f04086c225da11ad16d7f9a2fbca6483ab16dded upstream.

During some scenarios mmc_sdio_init_card() runs a retry path for the UHS-I specific initialization, which leads to removal of the previously allocated card. A new card is then re-allocated while retrying.

However, in one of the corresponding error paths we may end up to remove an already removed card, which likely leads to a NULL pointer exception. So, let's fix this.

Fixes: 5fc3d80ef496 ("mmc: sdio: don't use rocr to check if the card could support UHS mode") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Link: https://lore.kernel.org/r/20200430091640.455-2-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/mmc/core/sdio.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 0aa99694b937..4e72ad24322f 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -720,9 +720,8 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, /* Retry init sequence, but without R4_18V_PRESENT. */ retries = 0; goto try_again; - } else { - goto remove; } + return err; }

/*

From: Marc Zyngier maz@kernel.org

commit 0370964dd3ff7d3d406f292cb443a927952cbd05 upstream.

On a VHE system, the EL1 state is left in the CPU most of the time, and only syncronized back to memory when vcpu_put() is called (most of the time on preemption).

Which means that when injecting an exception, we'd better have a way to either: (1) write directly to the EL1 sysregs (2) synchronize the state back to memory, and do the changes there

For an AArch64, we already do (1), so we are safe. Unfortunately, doing the same thing for AArch32 would be pretty invasive. Instead, we can easily implement (2) by calling the put/load architectural backends, and keep preemption disabled. We can then reload the state back into EL1.

Cc: stable@vger.kernel.org Reported-by: James Morse james.morse@arm.com Signed-off-by: Marc Zyngier maz@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Conflicts: arch/arm/include/asm/kvm_host.h arch/arm64/include/asm/kvm_host.h Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/arm/include/asm/kvm_host.h | 2 ++ arch/arm64/include/asm/kvm_host.h | 2 ++ virt/kvm/arm/aarch32.c | 28 ++++++++++++++++++++++++++++ 3 files changed, 32 insertions(+)

diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index b736a452c2ca..661bd0344254 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -378,6 +378,8 @@ static inline void kvm_vcpu_put_sysregs(struct kvm_vcpu *vcpu) {} struct kvm *kvm_arch_alloc_vm(void); void kvm_arch_free_vm(struct kvm *kvm);

+#define kvm_arm_vcpu_loaded(vcpu) (false) + static inline int kvm_arm_config_vm(struct kvm *kvm, unsigned long type) { if (type) diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index bb51607b1905..62b6d0447674 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -584,6 +584,8 @@ void kvm_set_ipa_limit(void); struct kvm *kvm_arch_alloc_vm(void); void kvm_arch_free_vm(struct kvm *kvm);

+#define kvm_arm_vcpu_loaded(vcpu) ((vcpu)->arch.sysregs_loaded_on_cpu) + int kvm_arm_config_vm(struct kvm *kvm, unsigned long type);

#endif /* __ARM64_KVM_HOST_H__ */ diff --git a/virt/kvm/arm/aarch32.c b/virt/kvm/arm/aarch32.c index 18d6d5124397..92c9ad6c0182 100644 --- a/virt/kvm/arm/aarch32.c +++ b/virt/kvm/arm/aarch32.c @@ -44,6 +44,26 @@ static const u8 return_offsets[8][2] = { [7] = { 4, 4 }, /* FIQ, unused */ };

+static bool pre_fault_synchronize(struct kvm_vcpu *vcpu) +{ + preempt_disable(); + if (kvm_arm_vcpu_loaded(vcpu)) { + kvm_arch_vcpu_put(vcpu); + return true; + } + + preempt_enable(); + return false; +} + +static void post_fault_synchronize(struct kvm_vcpu *vcpu, bool loaded) +{ + if (loaded) { + kvm_arch_vcpu_load(vcpu, smp_processor_id()); + preempt_enable(); + } +} + /* * When an exception is taken, most CPSR fields are left unchanged in the * handler. However, some are explicitly overridden (e.g. M[4:0]). @@ -166,7 +186,10 @@ static void prepare_fault32(struct kvm_vcpu *vcpu, u32 mode, u32 vect_offset)

void kvm_inject_undef32(struct kvm_vcpu *vcpu) { + bool loaded = pre_fault_synchronize(vcpu); + prepare_fault32(vcpu, PSR_AA32_MODE_UND, 4); + post_fault_synchronize(vcpu, loaded); }

/* @@ -179,6 +202,9 @@ static void inject_abt32(struct kvm_vcpu *vcpu, bool is_pabt, u32 vect_offset; u32 *far, *fsr; bool is_lpae; + bool loaded; + + loaded = pre_fault_synchronize(vcpu);

if (is_pabt) { vect_offset = 12; @@ -202,6 +228,8 @@ static void inject_abt32(struct kvm_vcpu *vcpu, bool is_pabt, /* no need to shuffle FS[4] into DFSR[10] as its 0 */ *fsr = DFSR_FSC_EXTABT_nLPAE; } + + post_fault_synchronize(vcpu, loaded); }

void kvm_inject_dabt32(struct kvm_vcpu *vcpu, unsigned long addr)

From: Bogdan Togorean bogdan.togorean@analog.com

[ Upstream commit b97b6a1f6e14a25d1e1ca2a46c5fa3e2ca374e22 ]

ADV7511 support sample rates up to 192kHz. CTS and N parameters should be computed accordingly so this commit extend the list up to maximum supported sample rate.

Signed-off-by: Bogdan Togorean bogdan.togorean@analog.com Reviewed-by: Andrzej Hajda a.hajda@samsung.com Signed-off-by: Andrzej Hajda a.hajda@samsung.com Link: https://patchwork.freedesktop.org/patch/msgid/20200413113513.86091-2-bogdan.... Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/gpu/drm/bridge/adv7511/adv7511_audio.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c index 1b4783d45c53..3a218b56a008 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c @@ -20,13 +20,15 @@ static void adv7511_calc_cts_n(unsigned int f_tmds, unsigned int fs, { switch (fs) { case 32000: - *n = 4096; + case 48000: + case 96000: + case 192000: + *n = fs * 128 / 1000; break; case 44100: - *n = 6272; - break; - case 48000: - *n = 6144; + case 88200: + case 176400: + *n = fs * 128 / 900; break; }

From: Brad Love brad@nextdimension.cc

[ Upstream commit e955f959ac52e145f27ff2be9078b646d0352af0 ]

Getting the Xtal trim property to check if running is less error prone. Reset if_frequency if state is unknown.

Replaces the previous "garbage check".

Signed-off-by: Brad Love brad@nextdimension.cc Signed-off-by: Sean Young sean@mess.org Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/media/tuners/si2157.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c index a08d8fe2bb1b..13770b038048 100644 --- a/drivers/media/tuners/si2157.c +++ b/drivers/media/tuners/si2157.c @@ -84,24 +84,23 @@ static int si2157_init(struct dvb_frontend *fe) struct si2157_cmd cmd; const struct firmware *fw; const char *fw_name; - unsigned int uitmp, chip_id; + unsigned int chip_id, xtal_trim;

dev_dbg(&client->dev, "\n");

- /* Returned IF frequency is garbage when firmware is not running */ - memcpy(cmd.args, "\x15\x00\x06\x07", 4); + /* Try to get Xtal trim property, to verify tuner still running */ + memcpy(cmd.args, "\x15\x00\x04\x02", 4); cmd.wlen = 4; cmd.rlen = 4; ret = si2157_cmd_execute(client, &cmd); - if (ret) - goto err;

- uitmp = cmd.args[2] << 0 | cmd.args[3] << 8; - dev_dbg(&client->dev, "if_frequency kHz=%u\n", uitmp); + xtal_trim = cmd.args[2] | (cmd.args[3] << 8);

- if (uitmp == dev->if_frequency / 1000) + if (ret == 0 && xtal_trim < 16) goto warm;

+ dev->if_frequency = 0; /* we no longer know current tuner state */ + /* power up */ if (dev->chiptype == SI2157_CHIPTYPE_SI2146) { memcpy(cmd.args, "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9);

From: Evan Green evgreen@chromium.org

[ Upstream commit 6eefaee4f2d366a389da0eb95e524ba82bf358c4 ]

With a couple allies at Intel, and much badgering, I got confirmation from Intel that at least BXT suffers from the same SPI chip-select issue as Cannonlake (and beyond). The issue being that after going through runtime suspend/resume, toggling the chip-select line without also sending data does nothing.

Add the quirk to BXT to briefly toggle dynamic clock gating off and on, forcing the fabric to wake up enough to notice the CS register change.

Signed-off-by: Evan Green evgreen@chromium.org Cc: Shobhit Srivastava shobhit.srivastava@intel.com Cc: Andy Shevchenko andriy.shevchenko@linux.intel.com Link: https://lore.kernel.org/r/20200427163238.1.Ib1faaabe236e37ea73be9b8dcc6aa034... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/spi/spi-pxa2xx.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 2525fd9c8aa4..eafd0c2135a1 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -156,6 +156,7 @@ static const struct lpss_config lpss_platforms[] = { .tx_threshold_hi = 48, .cs_sel_shift = 8, .cs_sel_mask = 3 << 8, + .cs_clk_stays_gated = true, }, { /* LPSS_CNL_SSP */ .offset = 0x200,

From: Arthur Kiyanovski akiyano@amazon.com

[ Upstream commit e9a1de378dd46375f9abfd8de1e6f59ee114a793 ]

In case the "func" parameter is NULL we now return "-EINVAL". This shouldn't happen in general, but when it does happen, this is the proper way to handle it.

We also check func for NULL in the beginning of the function, as there is no reason to do all the work and realize in the end of the function it was useless.

Signed-off-by: Sameeh Jubran sameehj@amazon.com Signed-off-by: Arthur Kiyanovski akiyano@amazon.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/ethernet/amazon/ena/ena_com.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c index 3afc0e59a2bd..d07f7f65169a 100644 --- a/drivers/net/ethernet/amazon/ena/ena_com.c +++ b/drivers/net/ethernet/amazon/ena/ena_com.c @@ -2137,6 +2137,9 @@ int ena_com_get_hash_function(struct ena_com_dev *ena_dev, rss->hash_key; int rc;

+ if (unlikely(!func)) + return -EINVAL; + rc = ena_com_get_feature_ex(ena_dev, &get_resp, ENA_ADMIN_RSS_HASH_FUNCTION, rss->hash_key_dma_addr, @@ -2149,8 +2152,7 @@ int ena_com_get_hash_function(struct ena_com_dev *ena_dev, if (rss->hash_func) rss->hash_func--;

- if (func) - *func = rss->hash_func; + *func = rss->hash_func;

if (key) memcpy(key, hash_key->key, (size_t)(hash_key->keys_num) << 2);

From: Daniel Thompson daniel.thompson@linaro.org

[ Upstream commit ab8ad279ceac4fc78ae4dcf1a26326e05695e537 ]

flush_icache_range() contains a bodge to avoid issuing IPIs when the kgdb trap handler is running because issuing IPIs is unsafe (and not needed) in this execution context. However the current test, based on kgdb_connected is flawed: it both over-matches and under-matches.

The over match occurs because kgdb_connected is set when gdb attaches to the stub and remains set during normal running. This is relatively harmelss because in almost all cases irq_disabled() will be false.

The under match is more serious. When kdb is used instead of kgdb to access the debugger then kgdb_connected is not set in all the places that the debug core updates sw breakpoints (and hence flushes the icache). This can lead to deadlock.

Fix by replacing the ad-hoc check with the proper kgdb macro. This also allows us to drop the #ifdef wrapper.

Fixes: 3b8c9f1cdfc5 ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings") Signed-off-by: Daniel Thompson daniel.thompson@linaro.org Reviewed-by: Douglas Anderson dianders@chromium.org Link: https://lore.kernel.org/r/20200504170518.2959478-1-daniel.thompson@linaro.or... Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/arm64/include/asm/cacheflush.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h index 19844211a4e6..a449a1c602d3 100644 --- a/arch/arm64/include/asm/cacheflush.h +++ b/arch/arm64/include/asm/cacheflush.h @@ -90,7 +90,7 @@ static inline void flush_icache_range(unsigned long start, unsigned long end) * IPI all online CPUs so that they undergo a context synchronization * event and are forced to refetch the new instructions. */ -#ifdef CONFIG_KGDB + /* * KGDB performs cache maintenance with interrupts disabled, so we * will deadlock trying to IPI the secondary CPUs. In theory, we can @@ -100,9 +100,9 @@ static inline void flush_icache_range(unsigned long start, unsigned long end) * the patching operation, so we don't need extra IPIs here anyway. * In which case, add a KGDB-specific bodge and return early. */ - if (kgdb_connected && irqs_disabled()) + if (in_dbg_master()) return; -#endif + kick_all_cpus_sync(); }

From: Luke Nelson lukenels@cs.washington.edu

[ Upstream commit 579d1b3faa3735e781ff74aac0afd598515dbc63 ]

This patch fixes two issues present in the current function for encoding arm64 logical immediates when using the 32-bit variants of instructions.

First, the code does not correctly reject an all-ones 32-bit immediate, and returns an undefined instruction encoding.

Second, the code incorrectly rejects some 32-bit immediates that are actually encodable as logical immediates. The root cause is that the code uses a default mask of 64-bit all-ones, even for 32-bit immediates. This causes an issue later on when the default mask is used to fill the top bits of the immediate with ones, shown here:

/* * Pattern: 0..01..10..01..1 * * Fill the unused top bits with ones, and check if * the result is a valid immediate (all ones with a * contiguous ranges of zeroes). */ imm |= ~mask; if (!range_of_ones(~imm)) return AARCH64_BREAK_FAULT;

To see the problem, consider an immediate of the form 0..01..10..01..1, where the upper 32 bits are zero, such as 0x80000001. The code checks if ~(imm | ~mask) contains a range of ones: the incorrect mask yields 1..10..01..10..0, which fails the check; the correct mask yields 0..01..10..0, which succeeds.

The fix for both issues is to generate a correct mask based on the instruction immediate size, and use the mask to check for all-ones, all-zeroes, and values wider than the mask.

Currently, arch/arm64/kvm/va_layout.c is the only user of this function, which uses 64-bit immediates and therefore won't trigger these bugs.

We tested the new code against llvm-mc with all 1,302 encodable 32-bit logical immediates and all 5,334 encodable 64-bit logical immediates.

Fixes: ef3935eeebff ("arm64: insn: Add encoder for bitwise operations using literals") Suggested-by: Will Deacon will@kernel.org Co-developed-by: Xi Wang xi.wang@gmail.com Signed-off-by: Xi Wang xi.wang@gmail.com Signed-off-by: Luke Nelson luke.r.nels@gmail.com Reviewed-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/20200508181547.24783-2-luke.r.nels@gmail.com Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/arm64/kernel/insn.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/kernel/insn.c b/arch/arm64/kernel/insn.c index 3e6229e30109..cd37edbdedcb 100644 --- a/arch/arm64/kernel/insn.c +++ b/arch/arm64/kernel/insn.c @@ -1490,16 +1490,10 @@ static u32 aarch64_encode_immediate(u64 imm, u32 insn) { unsigned int immr, imms, n, ones, ror, esz, tmp; - u64 mask = ~0UL; - - /* Can't encode full zeroes or full ones */ - if (!imm || !~imm) - return AARCH64_BREAK_FAULT; + u64 mask;

switch (variant) { case AARCH64_INSN_VARIANT_32BIT: - if (upper_32_bits(imm)) - return AARCH64_BREAK_FAULT; esz = 32; break; case AARCH64_INSN_VARIANT_64BIT: @@ -1511,6 +1505,12 @@ static u32 aarch64_encode_immediate(u64 imm, return AARCH64_BREAK_FAULT; }

+ mask = GENMASK(esz - 1, 0); + + /* Can't encode full zeroes, full ones, or value wider than the mask */ + if (!imm || imm == mask || imm & ~mask) + return AARCH64_BREAK_FAULT; + /* * Inverse of Replicate(). Try to spot a repeating pattern * with a pow2 stride.

From: Tiezhu Yang yangtiezhu@loongson.cn

[ Upstream commit a44de7497f91834df0b8b6d459e259788ba66794 ]

When ATI Radeon GPU driver has been compiled directly into the kernel instead of as a module, we should make sure the firmware for the model (check available ones in /lib/firmware/radeon) is built-in to the kernel as well, otherwise there exists the following fatal error during GPU init, change CONFIG_DRM_RADEON=y to CONFIG_DRM_RADEON=m to fix it.

[ 1.900997] [drm] Loading RS780 Microcode [ 1.905077] radeon 0000:01:05.0: Direct firmware load for radeon/RS780_pfp.bin failed with error -2 [ 1.914140] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin" [ 1.920405] [drm:r600_init] *ERROR* Failed to load firmware! [ 1.926069] radeon 0000:01:05.0: Fatal error during GPU init [ 1.931729] [drm] radeon: finishing device.

Fixes: 024e6a8b5bb1 ("MIPS: Loongson: Add a Loongson-3 default config file") Signed-off-by: Tiezhu Yang yangtiezhu@loongson.cn Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/mips/configs/loongson3_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig index 324dfee23dfb..c871e40b8878 100644 --- a/arch/mips/configs/loongson3_defconfig +++ b/arch/mips/configs/loongson3_defconfig @@ -250,7 +250,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_DRM=y -CONFIG_DRM_RADEON=y +CONFIG_DRM_RADEON=m CONFIG_FB_RADEON=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=m

From: Douglas Anderson dianders@chromium.org

[ Upstream commit 202164fbfa2b2ffa3e66b504e0f126ba9a745006 ]

In commit 81eaadcae81b ("kgdboc: disable the console lock when in kgdb") we avoided the WARN_CONSOLE_UNLOCKED() yell when we were in kgdboc. That still works fine, but it turns out that we get a similar yell when using other I/O drivers. One example is the "I/O driver" for the kgdb test suite (kgdbts). When I enabled that I again got the same yells.

Even though "kgdbts" doesn't actually interact with the user over the console, using it still causes kgdb to print to the consoles. That trips the same warning: con_is_visible+0x60/0x68 con_scroll+0x110/0x1b8 lf+0x4c/0xc8 vt_console_print+0x1b8/0x348 vkdb_printf+0x320/0x89c kdb_printf+0x68/0x90 kdb_main_loop+0x190/0x860 kdb_stub+0x2cc/0x3ec kgdb_cpu_enter+0x268/0x744 kgdb_handle_exception+0x1a4/0x200 kgdb_compiled_brk_fn+0x34/0x44 brk_handler+0x7c/0xb8 do_debug_exception+0x1b4/0x228

Let's increment/decrement the "ignore_console_lock_warning" variable all the time when we enter the debugger.

This will allow us to later revert commit 81eaadcae81b ("kgdboc: disable the console lock when in kgdb").

Signed-off-by: Douglas Anderson dianders@chromium.org Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Reviewed-by: Daniel Thompson daniel.thompson@linaro.org Link: https://lore.kernel.org/r/20200507130644.v4.1.Ied2b058357152ebcc8bf68edd6f20... Signed-off-by: Daniel Thompson daniel.thompson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- kernel/debug/debug_core.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c index 94aa9ae0007a..d2799767aab8 100644 --- a/kernel/debug/debug_core.c +++ b/kernel/debug/debug_core.c @@ -577,6 +577,8 @@ static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs, if (kgdb_skipexception(ks->ex_vector, ks->linux_regs)) goto kgdb_restore;

+ atomic_inc(&ignore_console_lock_warning); + /* Call the I/O driver's pre_exception routine */ if (dbg_io_ops->pre_exception) dbg_io_ops->pre_exception(); @@ -649,6 +651,8 @@ static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs, if (dbg_io_ops->post_exception) dbg_io_ops->post_exception();

+ atomic_dec(&ignore_console_lock_warning); + if (!kgdb_single_step) { raw_spin_unlock(&dbg_slave_lock); /* Wait till all the CPUs have quit from the debugger. */

From: Serge Semin Sergey.Semin@baikalelectronics.ru

[ Upstream commit 43dba9f3f98c2b184a19f856f06fe22817bfd9e0 ]

It's pointless to track the Tx overrun interrupts if Rx-only SPI transfer is issued. Similarly there is no need in handling the Rx overrun/underrun interrupts if Tx-only SPI transfer is executed. So lets unmask the interrupts only if corresponding SPI transactions are implied.

Co-developed-by: Georgy Vlasov Georgy.Vlasov@baikalelectronics.ru Signed-off-by: Georgy Vlasov Georgy.Vlasov@baikalelectronics.ru Signed-off-by: Serge Semin Sergey.Semin@baikalelectronics.ru Cc: Ramil Zaripov Ramil.Zaripov@baikalelectronics.ru Cc: Alexey Malahov Alexey.Malahov@baikalelectronics.ru Cc: Thomas Bogendoerfer tsbogend@alpha.franken.de Cc: Paul Burton paulburton@kernel.org Cc: Ralf Baechle ralf@linux-mips.org Cc: Arnd Bergmann arnd@arndb.de Cc: Andy Shevchenko andriy.shevchenko@linux.intel.com Cc: Rob Herring robh+dt@kernel.org Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200522000806.7381-3-Sergey.Semin@baikalelectroni... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/spi/spi-dw-mid.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index f7ec8b98e6db..e1b34ef9a31c 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -228,19 +228,23 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,

static int mid_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer) { - u16 dma_ctrl = 0; + u16 imr = 0, dma_ctrl = 0;

dw_writel(dws, DW_SPI_DMARDLR, 0xf); dw_writel(dws, DW_SPI_DMATDLR, 0x10);

- if (xfer->tx_buf) + if (xfer->tx_buf) { dma_ctrl |= SPI_DMA_TDMAE; - if (xfer->rx_buf) + imr |= SPI_INT_TXOI; + } + if (xfer->rx_buf) { dma_ctrl |= SPI_DMA_RDMAE; + imr |= SPI_INT_RXUI | SPI_INT_RXOI; + } dw_writel(dws, DW_SPI_DMACR, dma_ctrl);

/* Set the interrupt mask */ - spi_umask_intr(dws, SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI); + spi_umask_intr(dws, imr);

dws->transfer_handler = dma_transfer;

From: Serge Semin Sergey.Semin@baikalelectronics.ru

[ Upstream commit 6d2e16a3181bafb77b535095c39ad1c8b9558c8c ]

Commit 100214889973 ("clocksource: dw_apb_timer_of: use clocksource_of_init") replaced a publicly available driver initialization method with one called by the timer_probe() method available after CLKSRC_OF. In current implementation it traverses all the timers available in the system and calls their initialization methods if corresponding devices were either in dtb or in acpi. But if before the commit any number of available timers would be installed as clockevent and clocksource devices, after that there would be at most two. The rest are just ignored since default case branch doesn't do anything. I don't see a reason of such behaviour, neither the commit message explains it. Moreover this might be wrong if on some platforms these timers might be used for different purpose, as virtually CPU-local clockevent timers and as an independent broadcast timer. So in order to keep the compatibility with the platforms where the order of the timers detection has some meaning, lets add the secondly discovered timer to be of clocksource/sched_clock type, while the very first and the others would provide the clockevents service.

Fixes: 100214889973 ("clocksource: dw_apb_timer_of: use clocksource_of_init") Signed-off-by: Serge Semin Sergey.Semin@baikalelectronics.ru Cc: Alexey Malahov Alexey.Malahov@baikalelectronics.ru Cc: Thomas Bogendoerfer tsbogend@alpha.franken.de Cc: Paul Burton paulburton@kernel.org Cc: Ralf Baechle ralf@linux-mips.org Cc: Alessandro Zummo a.zummo@towertech.it Cc: Alexandre Belloni alexandre.belloni@bootlin.com Cc: Arnd Bergmann arnd@arndb.de Cc: Rob Herring robh+dt@kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Daniel Lezcano daniel.lezcano@linaro.org Link: https://lore.kernel.org/r/20200521204818.25436-7-Sergey.Semin@baikalelectron... Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/clocksource/dw_apb_timer_of.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c index 69866cd8f4bb..3e4d0e5733d3 100644 --- a/drivers/clocksource/dw_apb_timer_of.c +++ b/drivers/clocksource/dw_apb_timer_of.c @@ -146,10 +146,6 @@ static int num_called; static int __init dw_apb_timer_init(struct device_node *timer) { switch (num_called) { - case 0: - pr_debug("%s: found clockevent timer\n", __func__); - add_clockevent(timer); - break; case 1: pr_debug("%s: found clocksource timer\n", __func__); add_clocksource(timer); @@ -160,6 +156,8 @@ static int __init dw_apb_timer_init(struct device_node *timer) #endif break; default: + pr_debug("%s: found clockevent timer\n", __func__); + add_clockevent(timer); break; }

From: Linus Walleij linus.walleij@linaro.org

[ Upstream commit e1de94380af588bdf6ad6f0cc1f75004c35bc096 ]

Recent work with KASan exposed the folling hard-coded bitmask in arch/arm/mm/proc-macros.S:

bic rd, sp, #8128 bic rd, rd, #63

This forms the bitmask 0x1FFF that is coinciding with (PAGE_SIZE << THREAD_SIZE_ORDER) - 1, this code was assuming that THREAD_SIZE is always 8K (8192).

As KASan was increasing THREAD_SIZE_ORDER to 2, I ran into this bug.

Fix it by this little oneline suggested by Ard:

bic rd, sp, #(THREAD_SIZE - 1) & ~63

Where THREAD_SIZE is defined using THREAD_SIZE_ORDER.

We have to also include <linux/const.h> since the THREAD_SIZE expands to use the _AC() macro.

Cc: Ard Biesheuvel ardb@kernel.org Cc: Florian Fainelli f.fainelli@gmail.com Suggested-by: Ard Biesheuvel ardb@kernel.org Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/arm/mm/proc-macros.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index 5461d589a1e2..60ac7c5999a9 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -5,6 +5,7 @@ * VMA_VM_FLAGS * VM_EXEC */ +#include <linux/const.h> #include <asm/asm-offsets.h> #include <asm/thread_info.h>

@@ -30,7 +31,7 @@ * act_mm - get current->active_mm */ .macro act_mm, rd - bic \rd, sp, #8128 + bic \rd, sp, #(THREAD_SIZE - 1) & ~63 bic \rd, \rd, #63 ldr \rd, [\rd, #TI_TASK] .if (TSK_ACTIVE_MM > IMM12_MASK)

From: Martin Blumenstingl martin.blumenstingl@googlemail.com

[ Upstream commit 91995b904ec2e44b5c159ac6a5d3f154345a4de7 ]

The vendor driver (from the 3.10 kernel) triggers a soft reset every time before starting a new command. While this fixes a problem where SDIO cards are not detected at all (because all commands simply timed out) this hurts SD card read performance a bit (in my tests between 10% to 20%).

Trigger a soft reset after we got a CRC error or if the previous command timed out (just like the vendor driver from the same 3.10 kernel for the newer SDHC controller IP does). This fixes detection of SDIO cards and doesn't hurt SD card read performance at the same time.

With this patch the initialization of an RTL8723BS SDIO card looks like this: req done (CMD52): -110: 00000000 00000000 00000000 00000000 clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 1 timing 0 starting CMD0 arg 00000000 flags 000000c0 req done (CMD0): 0: 00000000 00000000 00000000 00000000 clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 0 starting CMD8 arg 000001aa flags 000002f5 req done (CMD8): -110: 00000000 00000000 00000000 00000000 starting CMD5 arg 00000000 flags 000002e1 req done (CMD5): 0: 90ff0000 00000000 00000000 00000000 starting CMD5 arg 00200000 flags 000002e1 req done (CMD5): 0: 90ff0000 00000000 00000000 00000000 starting CMD3 arg 00000000 flags 00000075 req done (CMD3): 0: 00010000 00000000 00000000 00000000 starting CMD7 arg 00010000 flags 00000015 req done (CMD7): 0: 00001e00 00000000 00000000 00000000 starting CMD52 arg 00000000 flags 00000195 req done (CMD52): 0: 00001032 00000000 00000000 00000000 [... more CMD52 omitted ...] clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 2 clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 2 starting CMD52 arg 00000e00 flags 00000195 req done (CMD52): 0: 00001000 00000000 00000000 00000000 starting CMD52 arg 80000e02 flags 00000195 req done (CMD52): 0: 00001002 00000000 00000000 00000000 clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 4 timing 2 starting CMD52 arg 00020000 flags 00000195 req done (CMD52): 0: 00001007 00000000 00000000 00000000 [... more CMD52 omitted ...] new high speed SDIO card at address 0001

Fixes: ed80a13bb4c4c9 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs") Signed-off-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Link: https://lore.kernel.org/r/20200503222805.2668941-1-martin.blumenstingl@googl... Tested-by: Tobias Baumann 017623705678@o2online.de Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/mmc/host/meson-mx-sdio.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/meson-mx-sdio.c b/drivers/mmc/host/meson-mx-sdio.c index 1c062473b1c2..27837a794e7b 100644 --- a/drivers/mmc/host/meson-mx-sdio.c +++ b/drivers/mmc/host/meson-mx-sdio.c @@ -249,6 +249,9 @@ static void meson_mx_mmc_request_done(struct meson_mx_mmc_host *host)

mrq = host->mrq;

+ if (host->cmd->error) + meson_mx_mmc_soft_reset(host); + host->mrq = NULL; host->cmd = NULL;

From: Jon Doron arilou@gmail.com

[ Upstream commit f7d31e65368aeef973fab788aa22c4f1d5a6af66 ]

The problem the patch is trying to address is the fact that 'struct kvm_hyperv_exit' has different layout on when compiling in 32 and 64 bit modes.

In 64-bit mode the default alignment boundary is 64 bits thus forcing extra gaps after 'type' and 'msr' but in 32-bit mode the boundary is at 32 bits thus no extra gaps.

This is an issue as even when the kernel is 64 bit, the userspace using the interface can be both 32 and 64 bit but the same 32 bit userspace has to work with 32 bit kernel.

The issue is fixed by forcing the 64 bit layout, this leads to ABI change for 32 bit builds and while we are obviously breaking '32 bit userspace with 32 bit kernel' case, we're fixing the '32 bit userspace with 64 bit kernel' one.

As the interface has no (known) users and 32 bit KVM is rather baroque nowadays, this seems like a reasonable decision.

Reviewed-by: Vitaly Kuznetsov vkuznets@redhat.com Signed-off-by: Jon Doron arilou@gmail.com Message-Id: 20200424113746.3473563-2-arilou@gmail.com Reviewed-by: Roman Kagan rvkagan@yandex-team.ru Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- Documentation/virtual/kvm/api.txt | 2 ++ include/uapi/linux/kvm.h | 2 ++ 2 files changed, 4 insertions(+)

diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 3072aaf2278b..1ed80bbf46a9 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -4038,9 +4038,11 @@ EOI was received. #define KVM_EXIT_HYPERV_SYNIC 1 #define KVM_EXIT_HYPERV_HCALL 2 __u32 type; + __u32 pad1; union { struct { __u32 msr; + __u32 pad2; __u64 control; __u64 evt_page; __u64 msg_page; diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index b4430d386b1c..211888d0c4e1 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -189,9 +189,11 @@ struct kvm_hyperv_exit { #define KVM_EXIT_HYPERV_SYNIC 1 #define KVM_EXIT_HYPERV_HCALL 2 __u32 type; + __u32 pad1; union { struct { __u32 msr; + __u32 pad2; __u64 control; __u64 evt_page; __u64 msg_page;

From: Christoph Hellwig hch@lst.de

[ Upstream commit 5bf9917452112694b2c774465ee4dbe441c84b77 ]

vm_map_ram can keep mappings around after the vm_unmap_ram. Using that with non-PAGE_KERNEL mappings can lead to all kinds of aliasing issues.

Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Andrew Morton akpm@linux-foundation.org Acked-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Acked-by: Peter Zijlstra (Intel) peterz@infradead.org Cc: Christian Borntraeger borntraeger@de.ibm.com Cc: Christophe Leroy christophe.leroy@c-s.fr Cc: Daniel Vetter daniel.vetter@ffwll.ch Cc: David Airlie airlied@linux.ie Cc: Gao Xiang xiang@kernel.org Cc: Haiyang Zhang haiyangz@microsoft.com Cc: Johannes Weiner hannes@cmpxchg.org Cc: "K. Y. Srinivasan" kys@microsoft.com Cc: Laura Abbott labbott@redhat.com Cc: Mark Rutland mark.rutland@arm.com Cc: Michael Kelley mikelley@microsoft.com Cc: Minchan Kim minchan@kernel.org Cc: Nitin Gupta ngupta@vflare.org Cc: Robin Murphy robin.murphy@arm.com Cc: Sakari Ailus sakari.ailus@linux.intel.com Cc: Stephen Hemminger sthemmin@microsoft.com Cc: Sumit Semwal sumit.semwal@linaro.org Cc: Wei Liu wei.liu@kernel.org Cc: Benjamin Herrenschmidt benh@kernel.crashing.org Cc: Catalin Marinas catalin.marinas@arm.com Cc: Heiko Carstens heiko.carstens@de.ibm.com Cc: Paul Mackerras paulus@ozlabs.org Cc: Vasily Gorbik gor@linux.ibm.com Cc: Will Deacon will@kernel.org Link: http://lkml.kernel.org/r/20200414131348.444715-4-hch@lst.de Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/staging/android/ion/ion_heap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/android/ion/ion_heap.c b/drivers/staging/android/ion/ion_heap.c index 31db510018a9..6babcdb4d7d2 100644 --- a/drivers/staging/android/ion/ion_heap.c +++ b/drivers/staging/android/ion/ion_heap.c @@ -97,12 +97,12 @@ int ion_heap_map_user(struct ion_heap *heap, struct ion_buffer *buffer,

static int ion_heap_clear_pages(struct page **pages, int num, pgprot_t pgprot) { - void *addr = vm_map_ram(pages, num, -1, pgprot); + void *addr = vmap(pages, num, VM_MAP, pgprot);

if (!addr) return -ENOMEM; memset(addr, 0, PAGE_SIZE * num); - vm_unmap_ram(addr, num); + vunmap(addr);

return 0; }

From: Stephane Eranian eranian@google.com

[ Upstream commit c6fddb28bad26e5472cb7acf7b04cd5126f1a4ab ]

The xxx_mountpoint() interface provided by fs.c finds mount points for common pseudo filesystems. The first time xxx_mountpoint() is invoked, it scans the mount table (/proc/mounts) looking for a match. If found, it is cached. The price to scan /proc/mounts is paid once if the mount is found.

When the mount point is not found, subsequent calls to xxx_mountpoint() scan /proc/mounts over and over again. There is no caching.

This causes a scaling issue in perf record with hugeltbfs__mountpoint(). The function is called for each process found in synthesize__mmap_events(). If the machine has thousands of processes and if the /proc/mounts has many entries this could cause major overhead in perf record. We have observed multi-second slowdowns on some configurations.

As an example on a laptop:

Before:

$ sudo umount /dev/hugepages $ strace -e trace=openat -o /tmp/tt perf record -a ls $ fgrep mounts /tmp/tt 285

After:

$ sudo umount /dev/hugepages $ strace -e trace=openat -o /tmp/tt perf record -a ls $ fgrep mounts /tmp/tt 1

One could argue that the non-caching in case the moint point is not found is intentional. That way subsequent calls may discover a moint point if the sysadmin mounts the filesystem. But the same argument could be made against caching the mount point. It could be unmounted causing errors. It all depends on the intent of the interface. This patch assumes it is expected to scan /proc/mounts once. The patch documents the caching behavior in the fs.h header file.

An alternative would be to just fix perf record. But it would solve the problem with hugetlbs__mountpoint() but there could be similar issues (possibly down the line) with other xxx_mountpoint() calls in perf or other tools.

Signed-off-by: Stephane Eranian eranian@google.com Reviewed-by: Ian Rogers irogers@google.com Acked-by: Jiri Olsa jolsa@redhat.com Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Andrey Zhizhikin andrey.z@gmail.com Cc: Kan Liang kan.liang@linux.intel.com Cc: Kefeng Wang wangkefeng.wang@huawei.com Cc: Mark Rutland mark.rutland@arm.com Cc: Namhyung Kim namhyung@kernel.org Cc: Peter Zijlstra peterz@infradead.org Cc: Petr Mladek pmladek@suse.com Cc: Thomas Gleixner tglx@linutronix.de Link: http://lore.kernel.org/lkml/20200402154357.107873-3-irogers@google.com Signed-off-by: Ian Rogers irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- tools/lib/api/fs/fs.c | 17 +++++++++++++++++ tools/lib/api/fs/fs.h | 12 ++++++++++++ 2 files changed, 29 insertions(+)

diff --git a/tools/lib/api/fs/fs.c b/tools/lib/api/fs/fs.c index bd021a0eeef8..4cc69675c2a9 100644 --- a/tools/lib/api/fs/fs.c +++ b/tools/lib/api/fs/fs.c @@ -90,6 +90,7 @@ struct fs { const char * const *mounts; char path[PATH_MAX]; bool found; + bool checked; long magic; };

@@ -111,31 +112,37 @@ static struct fs fs__entries[] = { .name = "sysfs", .mounts = sysfs__fs_known_mountpoints, .magic = SYSFS_MAGIC, + .checked = false, }, [FS__PROCFS] = { .name = "proc", .mounts = procfs__known_mountpoints, .magic = PROC_SUPER_MAGIC, + .checked = false, }, [FS__DEBUGFS] = { .name = "debugfs", .mounts = debugfs__known_mountpoints, .magic = DEBUGFS_MAGIC, + .checked = false, }, [FS__TRACEFS] = { .name = "tracefs", .mounts = tracefs__known_mountpoints, .magic = TRACEFS_MAGIC, + .checked = false, }, [FS__HUGETLBFS] = { .name = "hugetlbfs", .mounts = hugetlbfs__known_mountpoints, .magic = HUGETLBFS_MAGIC, + .checked = false, }, [FS__BPF_FS] = { .name = "bpf", .mounts = bpf_fs__known_mountpoints, .magic = BPF_FS_MAGIC, + .checked = false, }, };

@@ -158,6 +165,7 @@ static bool fs__read_mounts(struct fs *fs) }

fclose(fp); + fs->checked = true; return fs->found = found; }

@@ -220,6 +228,7 @@ static bool fs__env_override(struct fs *fs) return false;

fs->found = true; + fs->checked = true; strncpy(fs->path, override_path, sizeof(fs->path) - 1); fs->path[sizeof(fs->path) - 1] = '\0'; return true; @@ -246,6 +255,14 @@ static const char *fs__mountpoint(int idx) if (fs->found) return (const char *)fs->path;

+ /* the mount point was already checked for the mount point + * but and did not exist, so return NULL to avoid scanning again. + * This makes the found and not found paths cost equivalent + * in case of multiple calls. + */ + if (fs->checked) + return NULL; + return fs__get_mountpoint(fs); }

diff --git a/tools/lib/api/fs/fs.h b/tools/lib/api/fs/fs.h index 92d03b8396b1..3b70003e7cfb 100644 --- a/tools/lib/api/fs/fs.h +++ b/tools/lib/api/fs/fs.h @@ -18,6 +18,18 @@ const char *name##__mount(void); \ bool name##__configured(void); \

+/* + * The xxxx__mountpoint() entry points find the first match mount point for each + * filesystems listed below, where xxxx is the filesystem type. + * + * The interface is as follows: + * + * - If a mount point is found on first call, it is cached and used for all + * subsequent calls. + * + * - If a mount point is not found, NULL is returned on first call and all + * subsequent calls. + */ FS(sysfs) FS(procfs) FS(debugfs)

From: Jitao Shi jitao.shi@mediatek.com

[ Upstream commit b0ff9b590733079f7f9453e5976a9dd2630949e3 ]

Add property "pinctrl-names" to swap pin mode between gpio and dpi mode. Set the dpi pins to gpio mode and output-low to avoid leakage current when dpi disabled.

Acked-by: Rob Herring robh@kernel.org Signed-off-by: Jitao Shi jitao.shi@mediatek.com Signed-off-by: Chun-Kuang Hu chunkuang.hu@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- .../devicetree/bindings/display/mediatek/mediatek,dpi.txt | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt index b6a7e7397b8b..b944fe067188 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt @@ -16,6 +16,9 @@ Required properties: Documentation/devicetree/bindings/graph.txt. This port should be connected to the input port of an attached HDMI or LVDS encoder chip.

+Optional properties: +- pinctrl-names: Contain "default" and "sleep". + Example:

dpi0: dpi@1401d000 { @@ -26,6 +29,9 @@ dpi0: dpi@1401d000 { <&mmsys CLK_MM_DPI_ENGINE>, <&apmixedsys CLK_APMIXED_TVDPLL>; clock-names = "pixel", "engine", "pll"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dpi_pin_func>; + pinctrl-1 = <&dpi_pin_idle>;

port { dpi0_out: endpoint {

From: Colin Ian King colin.king@canonical.com

[ Upstream commit 96f3a9392799dd0f6472648a7366622ffd0989f3 ]

Currently when i2c transfers fail the error return -EREMOTEIO is assigned to err but then later overwritten when the tuner attach call is made. Fix this by returning early with the error return code -EREMOTEIO on i2c transfer failure errors.

If the transfer fails, an uninitialized value will be read from b2.

Addresses-Coverity: ("Unused value")

Fixes: fbfee8684ff2 ("V4L/DVB (5651): Dibusb-mb: convert pll handling to properly use dvb-pll") Signed-off-by: Colin Ian King colin.king@canonical.com Signed-off-by: Sean Young sean@mess.org Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/media/usb/dvb-usb/dibusb-mb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/usb/dvb-usb/dibusb-mb.c b/drivers/media/usb/dvb-usb/dibusb-mb.c index 408920577716..94f59c7765dc 100644 --- a/drivers/media/usb/dvb-usb/dibusb-mb.c +++ b/drivers/media/usb/dvb-usb/dibusb-mb.c @@ -84,7 +84,7 @@ static int dibusb_tuner_probe_and_attach(struct dvb_usb_adapter *adap)

if (i2c_transfer(&adap->dev->i2c_adap, msg, 2) != 2) { err("tuner i2c write failed."); - ret = -EREMOTEIO; + return -EREMOTEIO; }

if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl)

From: Tiezhu Yang yangtiezhu@loongson.cn

[ Upstream commit 269b3a9ac538c4ae87f84be640b9fa89914a2489 ]

In the current code, if CONFIG_SWIOTLB is set, when failed to get IO TLB memory from the low pages by plat_swiotlb_setup(), it may lead to the boot process failed with kernel panic.

(1) On the Loongson and SiByte platform arch/mips/loongson64/dma.c arch/mips/sibyte/common/dma.c void __init plat_swiotlb_setup(void) { swiotlb_init(1); }

kernel/dma/swiotlb.c void __init swiotlb_init(int verbose) { ... vstart = memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE); if (vstart && !swiotlb_init_with_tbl(vstart, io_tlb_nslabs, verbose)) return; ... pr_warn("Cannot allocate buffer"); no_iotlb_memory = true; }

phys_addr_t swiotlb_tbl_map_single() { ... if (no_iotlb_memory) panic("Can not allocate SWIOTLB buffer earlier ..."); ... }

(2) On the Cavium OCTEON platform arch/mips/cavium-octeon/dma-octeon.c void __init plat_swiotlb_setup(void) { ... octeon_swiotlb = memblock_alloc_low(swiotlbsize, PAGE_SIZE); if (!octeon_swiotlb) panic("%s: Failed to allocate %zu bytes align=%lx\n", __func__, swiotlbsize, PAGE_SIZE); ... }

Because IO_TLB_DEFAULT_SIZE is 64M, if the rest size of low memory is less than 64M when call plat_swiotlb_setup(), we can easily reproduce the panic case.

In order to reduce the possibility of kernel panic when failed to get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate low memory as small as possible before plat_swiotlb_setup(), so make sparse_init() using top-down allocation.

Reported-by: Juxin Gao gaojuxin@loongson.cn Co-developed-by: Juxin Gao gaojuxin@loongson.cn Signed-off-by: Juxin Gao gaojuxin@loongson.cn Signed-off-by: Tiezhu Yang yangtiezhu@loongson.cn Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/mips/kernel/setup.c | 10 ++++++++++ 1 file changed, 10 insertions(+)

diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index e87c98b8a72c..2c2480be3f36 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -933,7 +933,17 @@ static void __init arch_mem_init(char **cmdline_p) BOOTMEM_DEFAULT); #endif device_tree_init(); + + /* + * In order to reduce the possibility of kernel panic when failed to + * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate + * low memory as small as possible before plat_swiotlb_setup(), so + * make sparse_init() using top-down allocation. + */ + memblock_set_bottom_up(false); sparse_init(); + memblock_set_bottom_up(true); + plat_swiotlb_setup();

dma_contiguous_reserve(PFN_PHYS(max_low_pfn));

From: Paul Moore paul@paul-moore.com

[ Upstream commit 3054d06719079388a543de6adb812638675ad8f5 ]

If audit_list_rules_send() fails when trying to create a new thread to send the rules it also fails to cleanup properly, leaking a reference to a net structure. This patch fixes the error patch and renames audit_send_list() to audit_send_list_thread() to better match its cousin, audit_send_reply_thread().

Reported-by: teroincn@gmail.com Reviewed-by: Richard Guy Briggs rgb@redhat.com Signed-off-by: Paul Moore paul@paul-moore.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- kernel/audit.c | 2 +- kernel/audit.h | 2 +- kernel/auditfilter.c | 16 +++++++--------- 3 files changed, 9 insertions(+), 11 deletions(-)

diff --git a/kernel/audit.c b/kernel/audit.c index 20c78480d632..45741c3c48a4 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -893,7 +893,7 @@ static int kauditd_thread(void *dummy) return 0; }

-int audit_send_list(void *_dest) +int audit_send_list_thread(void *_dest) { struct audit_netlink_list *dest = _dest; struct sk_buff *skb; diff --git a/kernel/audit.h b/kernel/audit.h index 214e14948370..99badd7ba56f 100644 --- a/kernel/audit.h +++ b/kernel/audit.h @@ -248,7 +248,7 @@ struct audit_netlink_list { struct sk_buff_head q; };

-int audit_send_list(void *_dest); +int audit_send_list_thread(void *_dest);

extern int selinux_audit_rule_update(void);

diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index 1c8a48abda80..b2cc63ca0068 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1157,11 +1157,8 @@ int audit_rule_change(int type, int seq, void *data, size_t datasz) */ int audit_list_rules_send(struct sk_buff *request_skb, int seq) { - u32 portid = NETLINK_CB(request_skb).portid; - struct net *net = sock_net(NETLINK_CB(request_skb).sk); struct task_struct *tsk; struct audit_netlink_list *dest; - int err = 0;

/* We can't just spew out the rules here because we might fill * the available socket buffer space and deadlock waiting for @@ -1169,25 +1166,26 @@ int audit_list_rules_send(struct sk_buff *request_skb, int seq) * happen if we're actually running in the context of auditctl * trying to _send_ the stuff */

- dest = kmalloc(sizeof(struct audit_netlink_list), GFP_KERNEL); + dest = kmalloc(sizeof(*dest), GFP_KERNEL); if (!dest) return -ENOMEM; - dest->net = get_net(net); - dest->portid = portid; + dest->net = get_net(sock_net(NETLINK_CB(request_skb).sk)); + dest->portid = NETLINK_CB(request_skb).portid; skb_queue_head_init(&dest->q);

mutex_lock(&audit_filter_mutex); audit_list_rules(seq, &dest->q); mutex_unlock(&audit_filter_mutex);

- tsk = kthread_run(audit_send_list, dest, "audit_send_list"); + tsk = kthread_run(audit_send_list_thread, dest, "audit_send_list"); if (IS_ERR(tsk)) { skb_queue_purge(&dest->q); + put_net(dest->net); kfree(dest); - err = PTR_ERR(tsk); + return PTR_ERR(tsk); }

- return err; + return 0; }

int audit_comparator(u32 left, u32 op, u32 right)

From: Andrii Nakryiko andriin@fb.com

[ Upstream commit 9f56bb531a809ecaa7f0ddca61d2cf3adc1cb81a ]

getline() allocates string, which has to be freed.

Fixes: 81f77fd0deeb ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID") Signed-off-by: Andrii Nakryiko andriin@fb.com Signed-off-by: Alexei Starovoitov ast@kernel.org Cc: Song Liu songliubraving@fb.com Link: https://lore.kernel.org/bpf/20200429012111.277390-7-andriin@fb.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- tools/testing/selftests/bpf/test_progs.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c index 89f8b0dae7ef..bad3505d66e0 100644 --- a/tools/testing/selftests/bpf/test_progs.c +++ b/tools/testing/selftests/bpf/test_progs.c @@ -1118,6 +1118,7 @@ static int extract_build_id(char *build_id, size_t size) len = size; memcpy(build_id, line, len); build_id[len] = '\0'; + free(line); return 0; err: fclose(fp);

From: Nathan Chancellor natechancellor@gmail.com

[ Upstream commit 18f1ca46858eac22437819937ae44aa9a8f9f2fa ]

When building 64r6_defconfig with CONFIG_MIPS32_O32 disabled and CONFIG_CRYPTO_RSA enabled:

lib/mpi/generic_mpih-mul1.c:37:24: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb); ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/mpi/longlong.h:664:22: note: expanded from macro 'umul_ppmm' : "=d" ((UDItype)(w0)) ~~~~~~~~~~^~~ lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb); ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/mpi/longlong.h:668:22: note: expanded from macro 'umul_ppmm' : "=d" ((UDItype)(w1)) ~~~~~~~~~~^~~ 2 errors generated.

This special case for umul_ppmm for MIPS64r6 was added in commit bbc25bee37d2b ("lib/mpi: Fix umul_ppmm() for MIPS64r6"), due to GCC being inefficient and emitting a __multi3 intrinsic.

There is no such issue with clang; with this patch applied, I can build this configuration without any problems and there are no link errors like mentioned in the commit above (which I can still reproduce with GCC 9.3.0 when that commit is reverted). Only use this definition when GCC is being used.

This really should have been caught by commit b0c091ae04f67 ("lib/mpi: Eliminate unused umul_ppmm definitions for MIPS") when I was messing around in this area but I was not testing 64-bit MIPS at the time.

Link: https://github.com/ClangBuiltLinux/linux/issues/885 Reported-by: Dmitry Golovin dima@golovin.in Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- lib/mpi/longlong.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/mpi/longlong.h b/lib/mpi/longlong.h index e01b705556aa..6c5229f98c9e 100644 --- a/lib/mpi/longlong.h +++ b/lib/mpi/longlong.h @@ -671,7 +671,7 @@ do { \ ************** MIPS/64 ************** ***************************************/ #if (defined(__mips) && __mips >= 3) && W_TYPE_SIZE == 64 -#if defined(__mips_isa_rev) && __mips_isa_rev >= 6 +#if defined(__mips_isa_rev) && __mips_isa_rev >= 6 && defined(CONFIG_CC_IS_GCC) /* * GCC ends up emitting a __multi3 intrinsic call for MIPS64r6 with the plain C * code below, so we special case MIPS64r6 until the compiler can do better.

From: Peter Zijlstra peterz@infradead.org

[ Upstream commit bf2c59fce4074e55d622089b34be3a6bc95484fb ]

In the CPU-offline process, it calls mmdrop() after idle entry and the subsequent call to cpuhp_report_idle_dead(). Once execution passes the call to rcu_report_dead(), RCU is ignoring the CPU, which results in lockdep complaining when mmdrop() uses RCU from either memcg or debugobjects below.

Fix it by cleaning up the active_mm state from BP instead. Every arch which has CONFIG_HOTPLUG_CPU should have already called idle_task_exit() from AP. The only exception is parisc because it switches them to &init_mm unconditionally (see smp_boot_one_cpu() and smp_cpu_init()), but the patch will still work there because it calls mmgrab(&init_mm) in smp_cpu_init() and then should call mmdrop(&init_mm) in finish_cpu().

WARNING: suspicious RCU usage ----------------------------- kernel/workqueue.c:710 RCU or wq_pool_mutex should be held!

other info that might help us debug this:

RCU used illegally from offline CPU! Call Trace: dump_stack+0xf4/0x164 (unreliable) lockdep_rcu_suspicious+0x140/0x164 get_work_pool+0x110/0x150 __queue_work+0x1bc/0xca0 queue_work_on+0x114/0x120 css_release+0x9c/0xc0 percpu_ref_put_many+0x204/0x230 free_pcp_prepare+0x264/0x570 free_unref_page+0x38/0xf0 __mmdrop+0x21c/0x2c0 idle_task_exit+0x170/0x1b0 pnv_smp_cpu_kill_self+0x38/0x2e0 cpu_die+0x48/0x64 arch_cpu_idle_dead+0x30/0x50 do_idle+0x2f4/0x470 cpu_startup_entry+0x38/0x40 start_secondary+0x7a8/0xa80 start_secondary_resume+0x10/0x14

Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Signed-off-by: Qian Cai cai@lca.pw Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Acked-by: Michael Ellerman mpe@ellerman.id.au (powerpc) Link: https://lkml.kernel.org/r/20200401214033.8448-1-cai@lca.pw Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/powerpc/platforms/powernv/smp.c | 1 - include/linux/sched/mm.h | 2 ++ kernel/cpu.c | 18 +++++++++++++++++- kernel/sched/core.c | 5 +++-- 4 files changed, 22 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c index 3d3c989e44dd..8d49ba370c50 100644 --- a/arch/powerpc/platforms/powernv/smp.c +++ b/arch/powerpc/platforms/powernv/smp.c @@ -171,7 +171,6 @@ static void pnv_smp_cpu_kill_self(void) /* Standard hot unplug procedure */

idle_task_exit(); - current->active_mm = NULL; /* for sanity */ cpu = smp_processor_id(); DBG("CPU%d offline\n", cpu); generic_set_cpu_dead(cpu); diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h index 8c3eb9dda1a3..290a613687b5 100644 --- a/include/linux/sched/mm.h +++ b/include/linux/sched/mm.h @@ -49,6 +49,8 @@ static inline void mmdrop(struct mm_struct *mm) __mmdrop(mm); }

+void mmdrop(struct mm_struct *mm); + /* * This has to be called after a get_task_mm()/mmget_not_zero() * followed by taking the mmap_sem for writing before modifying the diff --git a/kernel/cpu.c b/kernel/cpu.c index 536b079de32d..0fea08aefcf9 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -3,6 +3,7 @@ * * This code is licenced under the GPL. */ +#include <linux/sched/mm.h> #include <linux/proc_fs.h> #include <linux/smp.h> #include <linux/init.h> @@ -532,6 +533,21 @@ static int bringup_cpu(unsigned int cpu) return bringup_wait_for_ap(cpu); }

+static int finish_cpu(unsigned int cpu) +{ + struct task_struct *idle = idle_thread_get(cpu); + struct mm_struct *mm = idle->active_mm; + + /* + * idle_task_exit() will have switched to &init_mm, now + * clean up any remaining active_mm state. + */ + if (mm != &init_mm) + idle->active_mm = &init_mm; + mmdrop(mm); + return 0; +} + /* * Hotplug state machine related functions */ @@ -1381,7 +1397,7 @@ static struct cpuhp_step cpuhp_hp_states[] = { [CPUHP_BRINGUP_CPU] = { .name = "cpu:bringup", .startup.single = bringup_cpu, - .teardown.single = NULL, + .teardown.single = finish_cpu, .cant_stop = true, }, /* Final state before CPU kills itself */ diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 5057f1926f2b..0fbdc620697b 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5607,13 +5607,14 @@ void idle_task_exit(void) struct mm_struct *mm = current->active_mm;

BUG_ON(cpu_online(smp_processor_id())); + BUG_ON(current != this_rq()->idle);

if (mm != &init_mm) { switch_mm(mm, &init_mm, current); - current->active_mm = &init_mm; finish_arch_post_lock_switch(); } - mmdrop(mm); + + /* finish_cpu(), as ran on the BP, will clean up the active_mm state */ }

/*

From: Wei Yongjun weiyongjun1@huawei.com

[ Upstream commit 88ec7cb22ddde725ed4ce15991f0bd9dd817fd85 ]

Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function.

Fixes: b7370112f519 ("lpc32xx: Added ethernet driver") Signed-off-by: Wei Yongjun weiyongjun1@huawei.com Acked-by: Vladimir Zapolskiy vz@mleia.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/ethernet/nxp/lpc_eth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index 41d30f55c946..6bd6c261f2ba 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -845,7 +845,8 @@ static int lpc_mii_init(struct netdata_local *pldat) if (mdiobus_register(pldat->mii_bus)) goto err_out_unregister_bus;

- if (lpc_mii_probe(pldat->ndev) != 0) + err = lpc_mii_probe(pldat->ndev); + if (err) goto err_out_unregister_bus;

return 0;

From: Yunjian Wang wangyunjian@huawei.com

[ Upstream commit 09f6c44aaae0f1bdb8b983d7762676d5018c53bc ]

The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. And emac_start_xmit() can leak one skb if 'channel' == 3.

Signed-off-by: Yunjian Wang wangyunjian@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/ethernet/allwinner/sun4i-emac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c index 3143de45baaa..c458b81ba63a 100644 --- a/drivers/net/ethernet/allwinner/sun4i-emac.c +++ b/drivers/net/ethernet/allwinner/sun4i-emac.c @@ -433,7 +433,7 @@ static void emac_timeout(struct net_device *dev) /* Hardware start transmission. * Send a packet to media from the upper layer. */ -static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev) +static netdev_tx_t emac_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct emac_board_info *db = netdev_priv(dev); unsigned long channel; @@ -441,7 +441,7 @@ static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)

channel = db->tx_fifo_stat & 3; if (channel == 3) - return 1; + return NETDEV_TX_BUSY;

channel = (channel == 1 ? 1 : 0);

From: "Darrick J. Wong" darrick.wong@oracle.com

[ Upstream commit 8bc3b5e4b70d28f8edcafc3c9e4de515998eea9e ]

Make sure we release resources properly if we cannot clean out the COW extents in preparation for an extent swap.

Fixes: 96987eea537d6c ("xfs: cancel COW blocks before swapext") Signed-off-by: Darrick J. Wong darrick.wong@oracle.com Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- fs/xfs/xfs_bmap_util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c index e638740f1681..3e1dd66bd676 100644 --- a/fs/xfs/xfs_bmap_util.c +++ b/fs/xfs/xfs_bmap_util.c @@ -1823,7 +1823,7 @@ xfs_swap_extents( if (xfs_inode_has_cow_data(tip)) { error = xfs_reflink_cancel_cow_range(tip, 0, NULLFILEOFF, true); if (error) - return error; + goto out_unlock; }

/*

From: Jiaxun Yang jiaxun.yang@flygoat.com

[ Upstream commit ff487d41036035376e47972c7c522490b839ab37 ]

LLD failed to link vmlinux with 64bit load address for 32bit ELF while bfd will strip 64bit address into 32bit silently. To fix LLD build, we should truncate load address provided by platform into 32bit for 32bit kernel.

Signed-off-by: Jiaxun Yang jiaxun.yang@flygoat.com Link: https://github.com/ClangBuiltLinux/linux/issues/786 Link: https://sourceware.org/bugzilla/show_bug.cgi?id=25784 Reviewed-by: Fangrui Song maskray@google.com Reviewed-by: Kees Cook keescook@chromium.org Tested-by: Nathan Chancellor natechancellor@gmail.com Cc: Maciej W. Rozycki macro@linux-mips.org Tested-by: Nick Desaulniers ndesaulniers@google.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/mips/Makefile | 13 ++++++++++++- arch/mips/boot/compressed/Makefile | 2 +- arch/mips/kernel/vmlinux.lds.S | 2 +- 3 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/arch/mips/Makefile b/arch/mips/Makefile index ad0a92f95af1..63e2ad43bd6a 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -290,12 +290,23 @@ ifdef CONFIG_64BIT endif endif

+# When linking a 32-bit executable the LLVM linker cannot cope with a +# 32-bit load address that has been sign-extended to 64 bits. Simply +# remove the upper 32 bits then, as it is safe to do so with other +# linkers. +ifdef CONFIG_64BIT + load-ld = $(load-y) +else + load-ld = $(subst 0xffffffff,0x,$(load-y)) +endif + KBUILD_AFLAGS += $(cflags-y) KBUILD_CFLAGS += $(cflags-y) -KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y) +KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y) -DLINKER_LOAD_ADDRESS=$(load-ld) KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)

bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \ + LINKER_LOAD_ADDRESS=$(load-ld) \ VMLINUX_ENTRY_ADDRESS=$(entry-y) \ PLATFORM="$(platform-y)" \ ITS_INPUTS="$(its-y)" diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile index d859f079b771..378cbfb31ee7 100644 --- a/arch/mips/boot/compressed/Makefile +++ b/arch/mips/boot/compressed/Makefile @@ -90,7 +90,7 @@ ifneq ($(zload-y),) VMLINUZ_LOAD_ADDRESS := $(zload-y) else VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \ - $(obj)/vmlinux.bin $(VMLINUX_LOAD_ADDRESS)) + $(obj)/vmlinux.bin $(LINKER_LOAD_ADDRESS)) endif UIMAGE_LOADADDR = $(VMLINUZ_LOAD_ADDRESS)

diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 36f2e860ba3e..be63fff95b2a 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -50,7 +50,7 @@ SECTIONS /* . = 0xa800000000300000; */ . = 0xffffffff80300000; #endif - . = VMLINUX_LOAD_ADDRESS; + . = LINKER_LOAD_ADDRESS; /* read-only */ _text = .; /* Text and read-only data */ .text : {

From: Daniel Thompson daniel.thompson@linaro.org

[ Upstream commit 3fec4aecb311995189217e64d725cfe84a568de3 ]

Currently there is a small window where a badly timed migration could cause in_dbg_master() to spuriously return true. Specifically if we migrate to a new core after reading the processor id and the previous core takes a breakpoint then we will evaluate true if we read kgdb_active before we get the IPI to bring us to halt.

Fix this by checking irqs_disabled() first. Interrupts are always disabled when we are executing the kgdb trap so this is an acceptable prerequisite. This also allows us to replace raw_smp_processor_id() with smp_processor_id() since the short circuit logic will prevent warnings from PREEMPT_DEBUG.

Fixes: dcc7871128e9 ("kgdb: core changes to support kdb") Suggested-by: Will Deacon will@kernel.org Link: https://lore.kernel.org/r/20200506164223.2875760-1-daniel.thompson@linaro.or... Reviewed-by: Douglas Anderson dianders@chromium.org Signed-off-by: Daniel Thompson daniel.thompson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- include/linux/kgdb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h index e465bb15912d..6be5545d3584 100644 --- a/include/linux/kgdb.h +++ b/include/linux/kgdb.h @@ -317,7 +317,7 @@ extern void gdbstub_exit(int status); extern int kgdb_single_step; extern atomic_t kgdb_active; #define in_dbg_master() \ - (raw_smp_processor_id() == atomic_read(&kgdb_active)) + (irqs_disabled() && (smp_processor_id() == atomic_read(&kgdb_active))) extern bool dbg_is_early; extern void __init dbg_late_init(void); #else /* ! CONFIG_KGDB */

From: Brian Foster bfoster@redhat.com

[ Upstream commit 629dcb38dc351947ed6a26a997d4b587f3bd5c7e ]

The pre-flush dquot verification in xfs_qm_dqflush() duplicates the read verifier by checking the dquot in the on-disk buffer. Instead, verify the in-core variant before it is flushed to the buffer.

Fixes: 7224fa482a6d ("xfs: add full xfs_dqblk verifier") Signed-off-by: Brian Foster bfoster@redhat.com Reviewed-by: Dave Chinner dchinner@redhat.com Reviewed-by: Christoph Hellwig hch@lst.de Reviewed-by: Allison Collins allison.henderson@oracle.com Reviewed-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- fs/xfs/xfs_dquot.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c index a1af984e4913..59b2b29542f4 100644 --- a/fs/xfs/xfs_dquot.c +++ b/fs/xfs/xfs_dquot.c @@ -1120,13 +1120,12 @@ xfs_qm_dqflush( dqb = bp->b_addr + dqp->q_bufoffset; ddqp = &dqb->dd_diskdq;

- /* - * A simple sanity check in case we got a corrupted dquot. - */ - fa = xfs_dqblk_verify(mp, dqb, be32_to_cpu(ddqp->d_id), 0); + /* sanity check the in-core structure before we flush */ + fa = xfs_dquot_verify(mp, &dqp->q_core, be32_to_cpu(dqp->q_core.d_id), + 0); if (fa) { xfs_alert(mp, "corrupt dquot ID 0x%x in memory at %pS", - be32_to_cpu(ddqp->d_id), fa); + be32_to_cpu(dqp->q_core.d_id), fa); xfs_buf_relse(bp); xfs_dqfunlock(dqp); xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);

From: Hans de Goede hdegoede@redhat.com

[ Upstream commit f6ba524970c4b73b234bf41ecd6628f5803b1559 ]

Split the sparse keymap into 2 separate keymaps, a buttons and a switches keymap and combine the 2 to a single map again in intel_vbtn_input_setup().

This is a preparation patch for not telling userspace that we have switches when we do not have them (and for doing the same for the buttons).

Fixes: de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's") Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/platform/x86/intel-vbtn.c | 28 +++++++++++++++++++++++++--- 1 file changed, 25 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c index 0bcfa20dd614..e42203776727 100644 --- a/drivers/platform/x86/intel-vbtn.c +++ b/drivers/platform/x86/intel-vbtn.c @@ -39,14 +39,20 @@ static const struct key_entry intel_vbtn_keymap[] = { { KE_IGNORE, 0xC7, { KEY_VOLUMEDOWN } }, /* volume-down key release */ { KE_KEY, 0xC8, { KEY_ROTATE_LOCK_TOGGLE } }, /* rotate-lock key press */ { KE_KEY, 0xC9, { KEY_ROTATE_LOCK_TOGGLE } }, /* rotate-lock key release */ +}; + +static const struct key_entry intel_vbtn_switchmap[] = { { KE_SW, 0xCA, { .sw = { SW_DOCK, 1 } } }, /* Docked */ { KE_SW, 0xCB, { .sw = { SW_DOCK, 0 } } }, /* Undocked */ { KE_SW, 0xCC, { .sw = { SW_TABLET_MODE, 1 } } }, /* Tablet */ { KE_SW, 0xCD, { .sw = { SW_TABLET_MODE, 0 } } }, /* Laptop */ - { KE_END }, };

+#define KEYMAP_LEN \ + (ARRAY_SIZE(intel_vbtn_keymap) + ARRAY_SIZE(intel_vbtn_switchmap) + 1) + struct intel_vbtn_priv { + struct key_entry keymap[KEYMAP_LEN]; struct input_dev *input_dev; bool wakeup_mode; }; @@ -54,13 +60,29 @@ struct intel_vbtn_priv { static int intel_vbtn_input_setup(struct platform_device *device) { struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev); - int ret; + int ret, keymap_len = 0; + + if (true) { + memcpy(&priv->keymap[keymap_len], intel_vbtn_keymap, + ARRAY_SIZE(intel_vbtn_keymap) * + sizeof(struct key_entry)); + keymap_len += ARRAY_SIZE(intel_vbtn_keymap); + } + + if (true) { + memcpy(&priv->keymap[keymap_len], intel_vbtn_switchmap, + ARRAY_SIZE(intel_vbtn_switchmap) * + sizeof(struct key_entry)); + keymap_len += ARRAY_SIZE(intel_vbtn_switchmap); + } + + priv->keymap[keymap_len].type = KE_END;

priv->input_dev = devm_input_allocate_device(&device->dev); if (!priv->input_dev) return -ENOMEM;

- ret = sparse_keymap_setup(priv->input_dev, intel_vbtn_keymap, NULL); + ret = sparse_keymap_setup(priv->input_dev, priv->keymap, NULL); if (ret) return ret;

From: Hans de Goede hdegoede@redhat.com

[ Upstream commit 1fac39fd0316b19c3e57a182524332332d1643ce ]

Commit de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's") added a DMI chassis-type check to avoid accidentally reporting SW_TABLET_MODE = 1 to userspace on laptops.

Some devices with a detachable keyboard and using the intel-vbnt (INT33D6) interface to report if they are in tablet mode (keyboard detached) or not, report 32 / "Detachable" as chassis-type, e.g. the HP Pavilion X2 series.

Other devices with a detachable keyboard and using the intel-vbnt (INT33D6) interface to report SW_TABLET_MODE, report 8 / "Portable" as chassis-type. The Dell Venue 11 Pro 7130 is an example of this.

Extend the DMI chassis-type check to also accept Portables and Detachables so that the intel-vbtn driver will report SW_TABLET_MODE on these devices.

Note the chassis-type check was originally added to avoid a false-positive tablet-mode report on the Dell XPS 9360 laptop. To the best of my knowledge that laptop is using a chassis-type of 9 / "Laptop", so after this commit we still ignore the tablet-switch for that chassis-type.

Fixes: de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's") Signed-off-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Mario Limonciello Mario.limonciello@dell.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/platform/x86/intel-vbtn.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c index 23cda7aa96cd..5f8120d12859 100644 --- a/drivers/platform/x86/intel-vbtn.c +++ b/drivers/platform/x86/intel-vbtn.c @@ -157,12 +157,22 @@ static void detect_tablet_mode(struct platform_device *device) static bool intel_vbtn_has_switches(acpi_handle handle) { const char *chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE); + unsigned long chassis_type_int; unsigned long long vgbs; acpi_status status;

- if (!(chassis_type && strcmp(chassis_type, "31") == 0)) + if (kstrtoul(chassis_type, 10, &chassis_type_int)) return false;

+ switch (chassis_type_int) { + case 8: /* Portable */ + case 31: /* Convertible */ + case 32: /* Detachable */ + break; + default: + return false; + } + status = acpi_evaluate_integer(handle, "VGBS", NULL, &vgbs); return ACPI_SUCCESS(status); }

From: Rakesh Pillai pillair@codeaurora.org

[ Upstream commit c730c477176ad4af86d9aae4d360a7ad840b073a ]

Currently when the sending of any management pkt via wmi command fails, the packet is being unmapped freed in the error handling. But the idr entry added, which is used to track these packet is not getting removed.

Hence, during unload, in wmi cleanup, all the entries in IDR are removed and the corresponding buffer is attempted to be freed. This can cause a situation where one packet is attempted to be freed twice.

Fix this error by rmeoving the msdu from the idr list when the sending of a management packet over wmi fails.

Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1

Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi") Signed-off-by: Rakesh Pillai pillair@codeaurora.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/1588667015-25490-1-git-send-email-pillair@codeauro... Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/wireless/ath/ath10k/mac.c | 3 +++ drivers/net/wireless/ath/ath10k/wmi-ops.h | 10 ++++++++++ drivers/net/wireless/ath/ath10k/wmi-tlv.c | 15 +++++++++++++++ 3 files changed, 28 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index a09d7a07e90a..81af403c19c2 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -3852,6 +3852,9 @@ void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work) if (ret) { ath10k_warn(ar, "failed to transmit management frame by ref via WMI: %d\n", ret); + /* remove this msdu from idr tracking */ + ath10k_wmi_cleanup_mgmt_tx_send(ar, skb); + dma_unmap_single(ar->dev, paddr, skb->len, DMA_TO_DEVICE); ieee80211_free_txskb(ar->hw, skb); diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h index 7fd63bbf8e24..b6cd33fa79f8 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-ops.h +++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h @@ -139,6 +139,7 @@ struct wmi_ops { struct sk_buff *(*gen_mgmt_tx_send)(struct ath10k *ar, struct sk_buff *skb, dma_addr_t paddr); + int (*cleanup_mgmt_tx_send)(struct ath10k *ar, struct sk_buff *msdu); struct sk_buff *(*gen_dbglog_cfg)(struct ath10k *ar, u64 module_enable, u32 log_level); struct sk_buff *(*gen_pktlog_enable)(struct ath10k *ar, u32 filter); @@ -431,6 +432,15 @@ ath10k_wmi_get_txbf_conf_scheme(struct ath10k *ar) return ar->wmi.ops->get_txbf_conf_scheme(ar); }

+static inline int +ath10k_wmi_cleanup_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu) +{ + if (!ar->wmi.ops->cleanup_mgmt_tx_send) + return -EOPNOTSUPP; + + return ar->wmi.ops->cleanup_mgmt_tx_send(ar, msdu); +} + static inline int ath10k_wmi_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu, dma_addr_t paddr) diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c index 248decb494c2..7f435fa29f75 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c @@ -2638,6 +2638,18 @@ ath10k_wmi_tlv_op_gen_request_stats(struct ath10k *ar, u32 stats_mask) return skb; }

+static int +ath10k_wmi_tlv_op_cleanup_mgmt_tx_send(struct ath10k *ar, + struct sk_buff *msdu) +{ + struct ath10k_skb_cb *cb = ATH10K_SKB_CB(msdu); + struct ath10k_wmi *wmi = &ar->wmi; + + idr_remove(&wmi->mgmt_pending_tx, cb->msdu_id); + + return 0; +} + static int ath10k_wmi_mgmt_tx_alloc_msdu_id(struct ath10k *ar, struct sk_buff *skb, dma_addr_t paddr) @@ -2710,6 +2722,8 @@ ath10k_wmi_tlv_op_gen_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu, if (desc_id < 0) goto err_free_skb;

+ cb->msdu_id = desc_id; + ptr = (void *)skb->data; tlv = ptr; tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_MGMT_TX_CMD); @@ -3949,6 +3963,7 @@ static const struct wmi_ops wmi_tlv_ops = { .gen_force_fw_hang = ath10k_wmi_tlv_op_gen_force_fw_hang, /* .gen_mgmt_tx = not implemented; HTT is used */ .gen_mgmt_tx_send = ath10k_wmi_tlv_op_gen_mgmt_tx_send, + .cleanup_mgmt_tx_send = ath10k_wmi_tlv_op_cleanup_mgmt_tx_send, .gen_dbglog_cfg = ath10k_wmi_tlv_op_gen_dbglog_cfg, .gen_pktlog_enable = ath10k_wmi_tlv_op_gen_pktlog_enable, .gen_pktlog_disable = ath10k_wmi_tlv_op_gen_pktlog_disable,

From: Bhupesh Sharma bhsharma@redhat.com

[ Upstream commit 73e030977f7884dbe1be0018bab517e8d02760f8 ]

Normally kdump kernel(s) run under severe memory constraint with the basic idea being to save the crashdump vmcore reliably when the primary kernel panics/hangs.

Currently the qed* ethernet driver ends up consuming a lot of memory in the kdump kernel, leading to kdump kernel panic when one tries to save the vmcore via ssh/nfs (thus utilizing the services of the underlying qed* network interfaces).

An example OOM message log seen in the kdump kernel can be seen here [1], with crashkernel size reservation of 512M.

Using tools like memstrack (see [2]), we can track the modules taking up the bulk of memory in the kdump kernel and organize the memory usage output as per 'highest allocator first'. An example log for the OOM case indicates that the qed* modules end up allocating approximately 216M memory, which is a large part of the total crashkernel size:

dracut-pre-pivot[676]: ======== Report format module_summary: ======== dracut-pre-pivot[676]: Module qed using 149.6MB (2394 pages), peak allocation 149.6MB (2394 pages) dracut-pre-pivot[676]: Module qede using 65.3MB (1045 pages), peak allocation 65.3MB (1045 pages)

This patch reduces the default RX and TX ring count from 1024 to 64 when running inside kdump kernel, which leads to a significant memory saving.

An example log with the patch applied shows the reduced memory allocation in the kdump kernel: dracut-pre-pivot[674]: ======== Report format module_summary: ======== dracut-pre-pivot[674]: Module qed using 141.8MB (2268 pages), peak allocation 141.8MB (2268 pages) <..snip..> [dracut-pre-pivot[674]: Module qede using 4.8MB (76 pages), peak allocation 4.9MB (78 pages)

Tested crashdump vmcore save via ssh/nfs protocol using underlying qed* network interface after applying this patch.

[1] OOM log: ------------

kworker/0:6: page allocation failure: order:6, mode:0x60c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null) kworker/0:6 cpuset=/ mems_allowed=0 CPU: 0 PID: 145 Comm: kworker/0:6 Not tainted 4.18.0-109.el8.aarch64 #1 Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL025 01/18/2019 Workqueue: events work_for_cpu_fn Call trace: dump_backtrace+0x0/0x188 show_stack+0x24/0x30 dump_stack+0x90/0xb4 warn_alloc+0xf4/0x178 __alloc_pages_nodemask+0xcac/0xd58 alloc_pages_current+0x8c/0xf8 kmalloc_order_trace+0x38/0x108 qed_iov_alloc+0x40/0x248 [qed] qed_resc_alloc+0x224/0x518 [qed] qed_slowpath_start+0x254/0x928 [qed] __qede_probe+0xf8/0x5e0 [qede] qede_probe+0x68/0xd8 [qede] local_pci_probe+0x44/0xa8 work_for_cpu_fn+0x20/0x30 process_one_work+0x1ac/0x3e8 worker_thread+0x44/0x448 kthread+0x130/0x138 ret_from_fork+0x10/0x18 Cannot start slowpath qede: probe of 0000:05:00.1 failed with error -12

[2]. Memstrack tool: https://github.com/ryncsn/memstrack

Cc: kexec@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Ariel Elior aelior@marvell.com Cc: GR-everest-linux-l2@marvell.com Cc: Manish Chopra manishc@marvell.com Cc: David S. Miller davem@davemloft.net Signed-off-by: Bhupesh Sharma bhsharma@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/ethernet/qlogic/qede/qede.h | 2 ++ drivers/net/ethernet/qlogic/qede/qede_main.c | 11 +++++++++-- 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h index dc3be8a4acf4..2bdc410d1144 100644 --- a/drivers/net/ethernet/qlogic/qede/qede.h +++ b/drivers/net/ethernet/qlogic/qede/qede.h @@ -550,12 +550,14 @@ int qede_add_tc_flower_fltr(struct qede_dev *edev, __be16 proto, #define RX_RING_SIZE ((u16)BIT(RX_RING_SIZE_POW)) #define NUM_RX_BDS_MAX (RX_RING_SIZE - 1) #define NUM_RX_BDS_MIN 128 +#define NUM_RX_BDS_KDUMP_MIN 63 #define NUM_RX_BDS_DEF ((u16)BIT(10) - 1)

#define TX_RING_SIZE_POW 13 #define TX_RING_SIZE ((u16)BIT(TX_RING_SIZE_POW)) #define NUM_TX_BDS_MAX (TX_RING_SIZE - 1) #define NUM_TX_BDS_MIN 128 +#define NUM_TX_BDS_KDUMP_MIN 63 #define NUM_TX_BDS_DEF NUM_TX_BDS_MAX

#define QEDE_MIN_PKT_LEN 64 diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 0d8e39ffbcd1..1aabb2e7a38b 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -29,6 +29,7 @@ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ +#include <linux/crash_dump.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/version.h> @@ -730,8 +731,14 @@ static struct qede_dev *qede_alloc_etherdev(struct qed_dev *cdev, edev->dp_module = dp_module; edev->dp_level = dp_level; edev->ops = qed_ops; - edev->q_num_rx_buffers = NUM_RX_BDS_DEF; - edev->q_num_tx_buffers = NUM_TX_BDS_DEF; + + if (is_kdump_kernel()) { + edev->q_num_rx_buffers = NUM_RX_BDS_KDUMP_MIN; + edev->q_num_tx_buffers = NUM_TX_BDS_KDUMP_MIN; + } else { + edev->q_num_rx_buffers = NUM_RX_BDS_DEF; + edev->q_num_tx_buffers = NUM_TX_BDS_DEF; + }

DP_INFO(edev, "Allocated netdev with %d tx queues and %d rx queues\n", info->num_queues, info->num_queues);

From: Guoqing Jiang guoqing.jiang@cloud.ionos.com

[ Upstream commit f6766ff6afff70e2aaf39e1511e16d471de7c3ae ]

We need to check mddev->del_work before flush workqueu since the purpose of flush is to ensure the previous md is disappeared. Otherwise the similar deadlock appeared if LOCKDEP is enabled, it is due to md_open holds the bdev->bd_mutex before flush workqueue.

kernel: [ 154.522645] ====================================================== kernel: [ 154.522647] WARNING: possible circular locking dependency detected kernel: [ 154.522650] 5.6.0-rc7-lp151.27-default #25 Tainted: G O kernel: [ 154.522651] ------------------------------------------------------ kernel: [ 154.522653] mdadm/2482 is trying to acquire lock: kernel: [ 154.522655] ffff888078529128 ((wq_completion)md_misc){+.+.}, at: flush_workqueue+0x84/0x4b0 kernel: [ 154.522673] kernel: [ 154.522673] but task is already holding lock: kernel: [ 154.522675] ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590 kernel: [ 154.522691] kernel: [ 154.522691] which lock already depends on the new lock. kernel: [ 154.522691] kernel: [ 154.522694] kernel: [ 154.522694] the existing dependency chain (in reverse order) is: kernel: [ 154.522696] kernel: [ 154.522696] -> #4 (&bdev->bd_mutex){+.+.}: kernel: [ 154.522704] __mutex_lock+0x87/0x950 kernel: [ 154.522706] __blkdev_get+0x79/0x590 kernel: [ 154.522708] blkdev_get+0x65/0x140 kernel: [ 154.522709] blkdev_get_by_dev+0x2f/0x40 kernel: [ 154.522716] lock_rdev+0x3d/0x90 [md_mod] kernel: [ 154.522719] md_import_device+0xd6/0x1b0 [md_mod] kernel: [ 154.522723] new_dev_store+0x15e/0x210 [md_mod] kernel: [ 154.522728] md_attr_store+0x7a/0xc0 [md_mod] kernel: [ 154.522732] kernfs_fop_write+0x117/0x1b0 kernel: [ 154.522735] vfs_write+0xad/0x1a0 kernel: [ 154.522737] ksys_write+0xa4/0xe0 kernel: [ 154.522745] do_syscall_64+0x64/0x2b0 kernel: [ 154.522748] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522749] kernel: [ 154.522749] -> #3 (&mddev->reconfig_mutex){+.+.}: kernel: [ 154.522752] __mutex_lock+0x87/0x950 kernel: [ 154.522756] new_dev_store+0xc9/0x210 [md_mod] kernel: [ 154.522759] md_attr_store+0x7a/0xc0 [md_mod] kernel: [ 154.522761] kernfs_fop_write+0x117/0x1b0 kernel: [ 154.522763] vfs_write+0xad/0x1a0 kernel: [ 154.522765] ksys_write+0xa4/0xe0 kernel: [ 154.522767] do_syscall_64+0x64/0x2b0 kernel: [ 154.522769] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522770] kernel: [ 154.522770] -> #2 (kn->count#253){++++}: kernel: [ 154.522775] __kernfs_remove+0x253/0x2c0 kernel: [ 154.522778] kernfs_remove+0x1f/0x30 kernel: [ 154.522780] kobject_del+0x28/0x60 kernel: [ 154.522783] mddev_delayed_delete+0x24/0x30 [md_mod] kernel: [ 154.522786] process_one_work+0x2a7/0x5f0 kernel: [ 154.522788] worker_thread+0x2d/0x3d0 kernel: [ 154.522793] kthread+0x117/0x130 kernel: [ 154.522795] ret_from_fork+0x3a/0x50 kernel: [ 154.522796] kernel: [ 154.522796] -> #1 ((work_completion)(&mddev->del_work)){+.+.}: kernel: [ 154.522800] process_one_work+0x27e/0x5f0 kernel: [ 154.522802] worker_thread+0x2d/0x3d0 kernel: [ 154.522804] kthread+0x117/0x130 kernel: [ 154.522806] ret_from_fork+0x3a/0x50 kernel: [ 154.522807] kernel: [ 154.522807] -> #0 ((wq_completion)md_misc){+.+.}: kernel: [ 154.522813] __lock_acquire+0x1392/0x1690 kernel: [ 154.522816] lock_acquire+0xb4/0x1a0 kernel: [ 154.522818] flush_workqueue+0xab/0x4b0 kernel: [ 154.522821] md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522823] __blkdev_get+0xea/0x590 kernel: [ 154.522825] blkdev_get+0x65/0x140 kernel: [ 154.522828] do_dentry_open+0x1d1/0x380 kernel: [ 154.522831] path_openat+0x567/0xcc0 kernel: [ 154.522834] do_filp_open+0x9b/0x110 kernel: [ 154.522836] do_sys_openat2+0x201/0x2a0 kernel: [ 154.522838] do_sys_open+0x57/0x80 kernel: [ 154.522840] do_syscall_64+0x64/0x2b0 kernel: [ 154.522842] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522844] kernel: [ 154.522844] other info that might help us debug this: kernel: [ 154.522844] kernel: [ 154.522846] Chain exists of: kernel: [ 154.522846] (wq_completion)md_misc --> &mddev->reconfig_mutex --> &bdev->bd_mutex kernel: [ 154.522846] kernel: [ 154.522850] Possible unsafe locking scenario: kernel: [ 154.522850] kernel: [ 154.522852] CPU0 CPU1 kernel: [ 154.522853] ---- ---- kernel: [ 154.522854] lock(&bdev->bd_mutex); kernel: [ 154.522856] lock(&mddev->reconfig_mutex); kernel: [ 154.522858] lock(&bdev->bd_mutex); kernel: [ 154.522860] lock((wq_completion)md_misc); kernel: [ 154.522861] kernel: [ 154.522861] *** DEADLOCK *** kernel: [ 154.522861] kernel: [ 154.522864] 1 lock held by mdadm/2482: kernel: [ 154.522865] #0: ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590 kernel: [ 154.522868] kernel: [ 154.522868] stack backtrace: kernel: [ 154.522873] CPU: 1 PID: 2482 Comm: mdadm Tainted: G O 5.6.0-rc7-lp151.27-default #25 kernel: [ 154.522875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 kernel: [ 154.522878] Call Trace: kernel: [ 154.522881] dump_stack+0x8f/0xcb kernel: [ 154.522884] check_noncircular+0x194/0x1b0 kernel: [ 154.522888] ? __lock_acquire+0x1392/0x1690 kernel: [ 154.522890] __lock_acquire+0x1392/0x1690 kernel: [ 154.522893] lock_acquire+0xb4/0x1a0 kernel: [ 154.522895] ? flush_workqueue+0x84/0x4b0 kernel: [ 154.522898] flush_workqueue+0xab/0x4b0 kernel: [ 154.522900] ? flush_workqueue+0x84/0x4b0 kernel: [ 154.522905] ? md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522908] md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522910] __blkdev_get+0xea/0x590 kernel: [ 154.522912] ? bd_acquire+0xc0/0xc0 kernel: [ 154.522914] blkdev_get+0x65/0x140 kernel: [ 154.522916] ? bd_acquire+0xc0/0xc0 kernel: [ 154.522918] do_dentry_open+0x1d1/0x380 kernel: [ 154.522921] path_openat+0x567/0xcc0 kernel: [ 154.522923] ? __lock_acquire+0x380/0x1690 kernel: [ 154.522926] do_filp_open+0x9b/0x110 kernel: [ 154.522929] ? __alloc_fd+0xe5/0x1f0 kernel: [ 154.522935] ? kmem_cache_alloc+0x28c/0x630 kernel: [ 154.522939] ? do_sys_openat2+0x201/0x2a0 kernel: [ 154.522941] do_sys_openat2+0x201/0x2a0 kernel: [ 154.522944] do_sys_open+0x57/0x80 kernel: [ 154.522946] do_syscall_64+0x64/0x2b0 kernel: [ 154.522948] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522951] RIP: 0033:0x7f98d279d9ae

And md_alloc also flushed the same workqueue, but the thing is different here. Because all the paths call md_alloc don't hold bdev->bd_mutex, and the flush is necessary to avoid race condition, so leave it as it is.

Signed-off-by: Guoqing Jiang guoqing.jiang@cloud.ionos.com Signed-off-by: Song Liu songliubraving@fb.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/md/md.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c index c85023a46715..26698e375e9f 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7473,7 +7473,8 @@ static int md_open(struct block_device *bdev, fmode_t mode) */ mddev_put(mddev); /* Wait until bdev->bd_disk is definitely gone */ - flush_workqueue(md_misc_wq); + if (work_pending(&mddev->del_work)) + flush_workqueue(md_misc_wq); /* Then retry the open from the top */ return -ERESTARTSYS; }

From: Erez Shitrit erezsh@mellanox.com

[ Upstream commit 8b46d424a743ddfef8056d5167f13ee7ebd1dcad ]

After enabled loopback packets for IPoIB, we need to drop these packets that this HCA has replicated and came back to the same interface that sent them.

Fixes: 4c6c615e3f30 ("net/mlx5e: IPoIB, Add PKEY child interface nic profile") Signed-off-by: Erez Shitrit erezsh@mellanox.com Reviewed-by: Alex Vesker valex@mellanox.com Signed-off-by: Saeed Mahameed saeedm@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c index 311aa8411c89..8a2f8189669d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c @@ -1314,6 +1314,7 @@ int mlx5e_poll_rx_cq(struct mlx5e_cq *cq, int budget)

#ifdef CONFIG_MLX5_CORE_IPOIB

+#define MLX5_IB_GRH_SGID_OFFSET 8 #define MLX5_IB_GRH_DGID_OFFSET 24 #define MLX5_GID_SIZE 16

@@ -1327,6 +1328,7 @@ static inline void mlx5i_complete_rx_cqe(struct mlx5e_rq *rq, struct net_device *netdev; struct mlx5e_priv *priv; char *pseudo_header; + u32 flags_rqpn; u32 qpn; u8 *dgid; u8 g; @@ -1348,7 +1350,8 @@ static inline void mlx5i_complete_rx_cqe(struct mlx5e_rq *rq, tstamp = &priv->tstamp; stats = &priv->channel_stats[rq->ix].rq;

- g = (be32_to_cpu(cqe->flags_rqpn) >> 28) & 3; + flags_rqpn = be32_to_cpu(cqe->flags_rqpn); + g = (flags_rqpn >> 28) & 3; dgid = skb->data + MLX5_IB_GRH_DGID_OFFSET; if ((!g) || dgid[0] != 0xff) skb->pkt_type = PACKET_HOST; @@ -1357,9 +1360,15 @@ static inline void mlx5i_complete_rx_cqe(struct mlx5e_rq *rq, else skb->pkt_type = PACKET_MULTICAST;

- /* TODO: IB/ipoib: Allow mcast packets from other VFs - * 68996a6e760e5c74654723eeb57bf65628ae87f4 + /* Drop packets that this interface sent, ie multicast packets + * that the HCA has replicated. */ + if (g && (qpn == (flags_rqpn & 0xffffff)) && + (memcmp(netdev->dev_addr + 4, skb->data + MLX5_IB_GRH_SGID_OFFSET, + MLX5_GID_SIZE) == 0)) { + skb->dev = NULL; + return; + }

skb_pull(skb, MLX5_IB_GRH_BYTES);

From: Pali Rohár pali@kernel.org

[ Upstream commit 3aa42bae9c4d1641aeb36f1a8585cd1d506cf471 ]

The mwifiex_cfg80211_dump_station() uses static variable for iterating over a linked list of all associated stations (when the driver is in UAP role). This has a race condition if .dump_station is called in parallel for multiple interfaces. This corruption can be triggered by registering multiple SSIDs and calling, in parallel for multiple interfaces iw dev <iface> station dump

[16750.719775] Unable to handle kernel paging request at virtual address dead000000000110 ... [16750.899173] Call trace: [16750.901696] mwifiex_cfg80211_dump_station+0x94/0x100 [mwifiex] [16750.907824] nl80211_dump_station+0xbc/0x278 [cfg80211] [16750.913160] netlink_dump+0xe8/0x320 [16750.916827] netlink_recvmsg+0x1b4/0x338 [16750.920861] ____sys_recvmsg+0x7c/0x2b0 [16750.924801] ___sys_recvmsg+0x70/0x98 [16750.928564] __sys_recvmsg+0x58/0xa0 [16750.932238] __arm64_sys_recvmsg+0x28/0x30 [16750.936453] el0_svc_common.constprop.3+0x90/0x158 [16750.941378] do_el0_svc+0x74/0x90 [16750.944784] el0_sync_handler+0x12c/0x1a8 [16750.948903] el0_sync+0x114/0x140 [16750.952312] Code: f9400003 f907f423 eb02007f 54fffd60 (b9401060) [16750.958583] ---[ end trace c8ad181c2f4b8576 ]---

This patch drops the use of the static iterator, and instead every time the function is called iterates to the idx-th position of the linked-list.

It would be better to convert the code not to use linked list for associated stations storage (since the chip has a limited number of associated stations anyway - it could just be an array). Such a change may be proposed in the future. In the meantime this patch can backported into stable kernels in this simple form.

Fixes: 8baca1a34d4c ("mwifiex: dump station support in uap mode") Signed-off-by: Pali Rohár pali@kernel.org Acked-by: Ganapathi Bhat ganapathi.bhat@nxp.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20200515075924.13841-1-pali@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/wireless/marvell/mwifiex/cfg80211.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c index 7b74ef71bef1..650191db25cb 100644 --- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c +++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c @@ -1468,7 +1468,8 @@ mwifiex_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *dev, int idx, u8 *mac, struct station_info *sinfo) { struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); - static struct mwifiex_sta_node *node; + struct mwifiex_sta_node *node; + int i;

if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) && priv->media_connected && idx == 0) { @@ -1478,13 +1479,10 @@ mwifiex_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *dev, mwifiex_send_cmd(priv, HOST_CMD_APCMD_STA_LIST, HostCmd_ACT_GEN_GET, 0, NULL, true);

- if (node && (&node->list == &priv->sta_list)) { - node = NULL; - return -ENOENT; - } - - node = list_prepare_entry(node, &priv->sta_list, list); - list_for_each_entry_continue(node, &priv->sta_list, list) { + i = 0; + list_for_each_entry(node, &priv->sta_list, list) { + if (i++ != idx) + continue; ether_addr_copy(mac, node->mac_addr); return mwifiex_dump_station_info(priv, node, sinfo); }

From: Serge Semin Sergey.Semin@baikalelectronics.ru

[ Upstream commit bbb5946eb545fab8ad8f46bce8a803e1c0c39d47 ]

Indeed according to the MIPS32 Privileged Resource Architecgture the MAAR pair register address field either takes [12:31] bits for non-XPA systems and [12:55] otherwise. In any case the current address mask is just wrong for 64-bit and 32-bits XPA chips. So lets extend it to 59-bits of physical address value. This shall cover the 64-bits architecture and systems with XPA enabled, and won't cause any problem for non-XPA 32-bit systems, since address values exceeding the architecture specific MAAR mask will be just truncated with setting zeros in the unsupported upper bits.

Co-developed-by: Alexey Malahov Alexey.Malahov@baikalelectronics.ru Signed-off-by: Alexey Malahov Alexey.Malahov@baikalelectronics.ru Signed-off-by: Serge Semin Sergey.Semin@baikalelectronics.ru Cc: Thomas Bogendoerfer tsbogend@alpha.franken.de Cc: Paul Burton paulburton@kernel.org Cc: Ralf Baechle ralf@linux-mips.org Cc: Arnd Bergmann arnd@arndb.de Cc: Rob Herring robh+dt@kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/mips/include/asm/mipsregs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 1bb9448777c5..f9a7c137be9f 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -749,7 +749,7 @@

/* MAAR bit definitions */ #define MIPS_MAAR_VH (_U64CAST_(1) << 63) -#define MIPS_MAAR_ADDR ((BIT_ULL(BITS_PER_LONG - 12) - 1) << 12) +#define MIPS_MAAR_ADDR GENMASK_ULL(55, 12) #define MIPS_MAAR_ADDR_SHIFT 12 #define MIPS_MAAR_S (_ULCAST_(1) << 1) #define MIPS_MAAR_VL (_ULCAST_(1) << 0)

From: Nicolas Toromanoff nicolas.toromanoff@st.com

[ Upstream commit 49c2c082e00e0bc4f5cbb7c21c7f0f873b35ab09 ]

Allow use of crc_update without prior call to crc_init. And change (and fix) driver to use CRC device even on unaligned buffers.

Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module")

Signed-off-by: Nicolas Toromanoff nicolas.toromanoff@st.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/crypto/stm32/stm32_crc32.c | 98 +++++++++++++++--------------- 1 file changed, 48 insertions(+), 50 deletions(-)

diff --git a/drivers/crypto/stm32/stm32_crc32.c b/drivers/crypto/stm32/stm32_crc32.c index 29d2095d9dfd..749b51762b18 100644 --- a/drivers/crypto/stm32/stm32_crc32.c +++ b/drivers/crypto/stm32/stm32_crc32.c @@ -28,8 +28,10 @@

/* Registers values */ #define CRC_CR_RESET BIT(0) -#define CRC_CR_REVERSE (BIT(7) | BIT(6) | BIT(5)) #define CRC_INIT_DEFAULT 0xFFFFFFFF +#define CRC_CR_REV_IN_WORD (BIT(6) | BIT(5)) +#define CRC_CR_REV_IN_BYTE BIT(5) +#define CRC_CR_REV_OUT BIT(7)

#define CRC_AUTOSUSPEND_DELAY 50

@@ -38,8 +40,6 @@ struct stm32_crc { struct device *dev; void __iomem *regs; struct clk *clk; - u8 pending_data[sizeof(u32)]; - size_t nb_pending_bytes; };

struct stm32_crc_list { @@ -59,7 +59,6 @@ struct stm32_crc_ctx {

struct stm32_crc_desc_ctx { u32 partial; /* crc32c: partial in first 4 bytes of that struct */ - struct stm32_crc *crc; };

static int stm32_crc32_cra_init(struct crypto_tfm *tfm) @@ -101,25 +100,22 @@ static int stm32_crc_init(struct shash_desc *desc) struct stm32_crc *crc;

spin_lock_bh(&crc_list.lock); - list_for_each_entry(crc, &crc_list.dev_list, list) { - ctx->crc = crc; - break; - } + crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list); spin_unlock_bh(&crc_list.lock);

- pm_runtime_get_sync(ctx->crc->dev); + pm_runtime_get_sync(crc->dev);

/* Reset, set key, poly and configure in bit reverse mode */ - writel_relaxed(bitrev32(mctx->key), ctx->crc->regs + CRC_INIT); - writel_relaxed(bitrev32(mctx->poly), ctx->crc->regs + CRC_POL); - writel_relaxed(CRC_CR_RESET | CRC_CR_REVERSE, ctx->crc->regs + CRC_CR); + writel_relaxed(bitrev32(mctx->key), crc->regs + CRC_INIT); + writel_relaxed(bitrev32(mctx->poly), crc->regs + CRC_POL); + writel_relaxed(CRC_CR_RESET | CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT, + crc->regs + CRC_CR);

/* Store partial result */ - ctx->partial = readl_relaxed(ctx->crc->regs + CRC_DR); - ctx->crc->nb_pending_bytes = 0; + ctx->partial = readl_relaxed(crc->regs + CRC_DR);

- pm_runtime_mark_last_busy(ctx->crc->dev); - pm_runtime_put_autosuspend(ctx->crc->dev); + pm_runtime_mark_last_busy(crc->dev); + pm_runtime_put_autosuspend(crc->dev);

return 0; } @@ -128,31 +124,49 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8, unsigned int length) { struct stm32_crc_desc_ctx *ctx = shash_desc_ctx(desc); - struct stm32_crc *crc = ctx->crc; - u32 *d32; - unsigned int i; + struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm); + struct stm32_crc *crc; + + spin_lock_bh(&crc_list.lock); + crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list); + spin_unlock_bh(&crc_list.lock);

pm_runtime_get_sync(crc->dev);

- if (unlikely(crc->nb_pending_bytes)) { - while (crc->nb_pending_bytes != sizeof(u32) && length) { - /* Fill in pending data */ - crc->pending_data[crc->nb_pending_bytes++] = *(d8++); + /* + * Restore previously calculated CRC for this context as init value + * Restore polynomial configuration + * Configure in register for word input data, + * Configure out register in reversed bit mode data. + */ + writel_relaxed(bitrev32(ctx->partial), crc->regs + CRC_INIT); + writel_relaxed(bitrev32(mctx->poly), crc->regs + CRC_POL); + writel_relaxed(CRC_CR_RESET | CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT, + crc->regs + CRC_CR); + + if (d8 != PTR_ALIGN(d8, sizeof(u32))) { + /* Configure for byte data */ + writel_relaxed(CRC_CR_REV_IN_BYTE | CRC_CR_REV_OUT, + crc->regs + CRC_CR); + while (d8 != PTR_ALIGN(d8, sizeof(u32)) && length) { + writeb_relaxed(*d8++, crc->regs + CRC_DR); length--; } - - if (crc->nb_pending_bytes == sizeof(u32)) { - /* Process completed pending data */ - writel_relaxed(*(u32 *)crc->pending_data, - crc->regs + CRC_DR); - crc->nb_pending_bytes = 0; - } + /* Configure for word data */ + writel_relaxed(CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT, + crc->regs + CRC_CR); }

- d32 = (u32 *)d8; - for (i = 0; i < length >> 2; i++) - /* Process 32 bits data */ - writel_relaxed(*(d32++), crc->regs + CRC_DR); + for (; length >= sizeof(u32); d8 += sizeof(u32), length -= sizeof(u32)) + writel_relaxed(*((u32 *)d8), crc->regs + CRC_DR); + + if (length) { + /* Configure for byte data */ + writel_relaxed(CRC_CR_REV_IN_BYTE | CRC_CR_REV_OUT, + crc->regs + CRC_CR); + while (length--) + writeb_relaxed(*d8++, crc->regs + CRC_DR); + }

/* Store partial result */ ctx->partial = readl_relaxed(crc->regs + CRC_DR); @@ -160,22 +174,6 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8, pm_runtime_mark_last_busy(crc->dev); pm_runtime_put_autosuspend(crc->dev);

- /* Check for pending data (non 32 bits) */ - length &= 3; - if (likely(!length)) - return 0; - - if ((crc->nb_pending_bytes + length) >= sizeof(u32)) { - /* Shall not happen */ - dev_err(crc->dev, "Pending data overflow\n"); - return -EINVAL; - } - - d8 = (const u8 *)d32; - for (i = 0; i < length; i++) - /* Store pending data */ - crc->pending_data[crc->nb_pending_bytes++] = *(d8++); - return 0; }

From: Nicolas Toromanoff nicolas.toromanoff@st.com

[ Upstream commit 10b89c43a64eb0d236903b79a3bc9d8f6cbfd9c7 ]

Ensure CRC algorithm is registered only once in crypto framework when there are several instances of CRC devices.

Update the CRC device list management to avoid that only the first CRC instance is used.

Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module")

Signed-off-by: Nicolas Toromanoff nicolas.toromanoff@st.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/crypto/stm32/stm32_crc32.c | 48 ++++++++++++++++++++++-------- 1 file changed, 36 insertions(+), 12 deletions(-)

diff --git a/drivers/crypto/stm32/stm32_crc32.c b/drivers/crypto/stm32/stm32_crc32.c index c5ad83ad2f72..47d31335c2d4 100644 --- a/drivers/crypto/stm32/stm32_crc32.c +++ b/drivers/crypto/stm32/stm32_crc32.c @@ -93,16 +93,29 @@ static int stm32_crc_setkey(struct crypto_shash *tfm, const u8 *key, return 0; }

-static int stm32_crc_init(struct shash_desc *desc) +static struct stm32_crc *stm32_crc_get_next_crc(void) { - struct stm32_crc_desc_ctx *ctx = shash_desc_ctx(desc); - struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm); struct stm32_crc *crc;

spin_lock_bh(&crc_list.lock); crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list); + if (crc) + list_move_tail(&crc->list, &crc_list.dev_list); spin_unlock_bh(&crc_list.lock);

+ return crc; +} + +static int stm32_crc_init(struct shash_desc *desc) +{ + struct stm32_crc_desc_ctx *ctx = shash_desc_ctx(desc); + struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm); + struct stm32_crc *crc; + + crc = stm32_crc_get_next_crc(); + if (!crc) + return -ENODEV; + pm_runtime_get_sync(crc->dev);

/* Reset, set key, poly and configure in bit reverse mode */ @@ -127,9 +140,9 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8, struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm); struct stm32_crc *crc;

- spin_lock_bh(&crc_list.lock); - crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list); - spin_unlock_bh(&crc_list.lock); + crc = stm32_crc_get_next_crc(); + if (!crc) + return -ENODEV;

pm_runtime_get_sync(crc->dev);

@@ -202,6 +215,8 @@ static int stm32_crc_digest(struct shash_desc *desc, const u8 *data, return stm32_crc_init(desc) ?: stm32_crc_finup(desc, data, length, out); }

+static unsigned int refcnt; +static DEFINE_MUTEX(refcnt_lock); static struct shash_alg algs[] = { /* CRC-32 */ { @@ -294,12 +309,18 @@ static int stm32_crc_probe(struct platform_device *pdev) list_add(&crc->list, &crc_list.dev_list); spin_unlock(&crc_list.lock);

- ret = crypto_register_shashes(algs, ARRAY_SIZE(algs)); - if (ret) { - dev_err(dev, "Failed to register\n"); - clk_disable_unprepare(crc->clk); - return ret; + mutex_lock(&refcnt_lock); + if (!refcnt) { + ret = crypto_register_shashes(algs, ARRAY_SIZE(algs)); + if (ret) { + mutex_unlock(&refcnt_lock); + dev_err(dev, "Failed to register\n"); + clk_disable_unprepare(crc->clk); + return ret; + } } + refcnt++; + mutex_unlock(&refcnt_lock);

dev_info(dev, "Initialized\n");

@@ -320,7 +341,10 @@ static int stm32_crc_remove(struct platform_device *pdev) list_del(&crc->list); spin_unlock(&crc_list.lock);

- crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); + mutex_lock(&refcnt_lock); + if (!--refcnt) + crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); + mutex_unlock(&refcnt_lock);

pm_runtime_disable(crc->dev); pm_runtime_put_noidle(crc->dev);

From: Finn Thain fthain@telegraphics.com.au

[ Upstream commit bcc44f6b74106b31f0b0408b70305a40360d63b7 ]

There is no VIA2 chip on the Mac IIfx, so don't call via_flush_cache(). This avoids a boot crash which appeared in v5.4.

printk: console [ttyS0] enabled printk: bootconsole [debug0] disabled printk: bootconsole [debug0] disabled Calibrating delay loop... 9.61 BogoMIPS (lpj=48064) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) devtmpfs: initialized random: get_random_u32 called from bucket_table_alloc.isra.27+0x68/0x194 with crng_init=0 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: -1, 3072 bytes, linear) NET: Registered protocol family 16 Data read fault at 0x00000000 in Super Data (pc=0x8a6a) BAD KERNEL BUSERR Oops: 00000000 Modules linked in: PC: [<00008a6a>] via_flush_cache+0x12/0x2c SR: 2700 SP: 01c1fe3c a2: 01c24000 d0: 00001119 d1: 0000000c d2: 00012000 d3: 0000000f d4: 01c06840 d5: 00033b92 a0: 00000000 a1: 00000000 Process swapper (pid: 1, task=01c24000) Frame format=B ssw=0755 isc=0200 isb=fff7 daddr=00000000 dobuf=01c1fed0 baddr=00008a6e dibuf=0000004e ver=f Stack from 01c1fec4: 01c1fed0 00007d7e 00010080 01c1fedc 0000792e 00000001 01c1fef4 00006b40 01c80000 00040000 00000006 00000003 01c1ff1c 004a545e 004ff200 00040000 00000000 00000003 01c06840 00033b92 004a5410 004b6c88 01c1ff84 000021e2 00000073 00000003 01c06840 00033b92 0038507a 004bb094 004b6ca8 004b6c88 004b6ca4 004b6c88 000021ae 00020002 00000000 01c0685d 00000000 01c1ffb4 0049f938 00409c85 01c06840 0045bd40 00000073 00000002 00000002 00000000 Call Trace: [<00007d7e>] mac_cache_card_flush+0x12/0x1c [<00010080>] fix_dnrm+0x2/0x18 [<0000792e>] cache_push+0x46/0x5a [<00006b40>] arch_dma_prep_coherent+0x60/0x6e [<00040000>] switched_to_dl+0x76/0xd0 [<004a545e>] dma_atomic_pool_init+0x4e/0x188 [<00040000>] switched_to_dl+0x76/0xd0 [<00033b92>] parse_args+0x0/0x370 [<004a5410>] dma_atomic_pool_init+0x0/0x188 [<000021e2>] do_one_initcall+0x34/0x1be [<00033b92>] parse_args+0x0/0x370 [<0038507a>] strcpy+0x0/0x1e [<000021ae>] do_one_initcall+0x0/0x1be [<00020002>] do_proc_dointvec_conv+0x54/0x74 [<0049f938>] kernel_init_freeable+0x126/0x190 [<0049f94c>] kernel_init_freeable+0x13a/0x190 [<004a5410>] dma_atomic_pool_init+0x0/0x188 [<00041798>] complete+0x0/0x3c [<000b9b0c>] kfree+0x0/0x20a [<0038df98>] schedule+0x0/0xd0 [<0038d604>] kernel_init+0x0/0xda [<0038d610>] kernel_init+0xc/0xda [<0038d604>] kernel_init+0x0/0xda [<00002d38>] ret_from_kernel_thread+0xc/0x14 Code: 0000 2079 0048 10da 2279 0048 10c8 d3c8 <1011> 0200 fff7 1280 d1f9 0048 10c8 1010 0000 0008 1080 4e5e 4e75 4e56 0000 2039 Disabling lock debugging due to kernel taint Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Thanks to Stan Johnson for capturing the console log and running git bisect.

Git bisect said commit 8e3a68fb55e0 ("dma-mapping: make dma_atomic_pool_init self-contained") is the first "bad" commit. I don't know why. Perhaps mach_l2_flush first became reachable with that commit.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-and-tested-by: Stan Johnson userm57@yahoo.com Signed-off-by: Finn Thain fthain@telegraphics.com.au Cc: Joshua Thompson funaho@jurai.org Link: https://lore.kernel.org/r/b8bbeef197d6b3898e82ed0d231ad08f575a4b34.158994912... Signed-off-by: Geert Uytterhoeven geert@linux-m68k.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/m68k/include/asm/mac_via.h | 1 + arch/m68k/mac/config.c | 21 ++------------------- arch/m68k/mac/via.c | 6 +++++- 3 files changed, 8 insertions(+), 20 deletions(-)

diff --git a/arch/m68k/include/asm/mac_via.h b/arch/m68k/include/asm/mac_via.h index de1470c4d829..1149251ea58d 100644 --- a/arch/m68k/include/asm/mac_via.h +++ b/arch/m68k/include/asm/mac_via.h @@ -257,6 +257,7 @@ extern int rbv_present,via_alt_mapping;

struct irq_desc;

+extern void via_l2_flush(int writeback); extern void via_register_interrupts(void); extern void via_irq_enable(int); extern void via_irq_disable(int); diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c index cd9317d53276..a4f91bea6c88 100644 --- a/arch/m68k/mac/config.c +++ b/arch/m68k/mac/config.c @@ -61,7 +61,6 @@ extern void iop_preinit(void); extern void iop_init(void); extern void via_init(void); extern void via_init_clock(irq_handler_t func); -extern void via_flush_cache(void); extern void oss_init(void); extern void psc_init(void); extern void baboon_init(void); @@ -132,21 +131,6 @@ int __init mac_parse_bootinfo(const struct bi_record *record) return unknown; }

-/* - * Flip into 24bit mode for an instant - flushes the L2 cache card. We - * have to disable interrupts for this. Our IRQ handlers will crap - * themselves if they take an IRQ in 24bit mode! - */ - -static void mac_cache_card_flush(int writeback) -{ - unsigned long flags; - - local_irq_save(flags); - via_flush_cache(); - local_irq_restore(flags); -} - void __init config_mac(void) { if (!MACH_IS_MAC) @@ -178,9 +162,8 @@ void __init config_mac(void) * not. */

- if (macintosh_config->ident == MAC_MODEL_IICI - || macintosh_config->ident == MAC_MODEL_IIFX) - mach_l2_flush = mac_cache_card_flush; + if (macintosh_config->ident == MAC_MODEL_IICI) + mach_l2_flush = via_l2_flush; }

diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index 038d5a1c4d48..8307da441a10 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -289,10 +289,14 @@ void via_debug_dump(void) * the system into 24-bit mode for an instant. */

-void via_flush_cache(void) +void via_l2_flush(int writeback) { + unsigned long flags; + + local_irq_save(flags); via2[gBufB] &= ~VIA2B_vMode32; via2[gBufB] |= VIA2B_vMode32; + local_irq_restore(flags); }

/*

From: Alexander Sverdlin alexander.sverdlin@nokia.com

[ Upstream commit 81f3dc9349ce0bf7b8447f147f45e70f0a5b36a6 ]

Ignore loopback-originatig packets soon enough and don't try to process L2 header where it doesn't exist. The very similar br_handle_frame() in bridge code performs exactly the same check.

This is an example of such ICMPv6 packet:

skb len=96 headroom=40 headlen=96 tailroom=56 mac=(40,0) net=(40,40) trans=80 shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0)) csum(0xae2e9a2f ip_summed=1 complete_sw=0 valid=0 level=0) hash(0xc97ebd88 sw=1 l4=1) proto=0x86dd pkttype=5 iif=24 dev name=etha01.212 feat=0x0x0000000040005000 skb headroom: 00000000: 00 7c 86 52 84 88 ff ff 00 00 00 00 00 00 08 00 skb headroom: 00000010: 45 00 00 9e 5d 5c 40 00 40 11 33 33 00 00 00 01 skb headroom: 00000020: 02 40 43 80 00 00 86 dd skb linear: 00000000: 60 09 88 bd 00 38 3a ff fe 80 00 00 00 00 00 00 skb linear: 00000010: 00 40 43 ff fe 80 00 00 ff 02 00 00 00 00 00 00 skb linear: 00000020: 00 00 00 00 00 00 00 01 86 00 61 00 40 00 00 2d skb linear: 00000030: 00 00 00 00 00 00 00 00 03 04 40 e0 00 00 01 2c skb linear: 00000040: 00 00 00 78 00 00 00 00 fd 5f 42 68 23 87 a8 81 skb linear: 00000050: 00 00 00 00 00 00 00 00 01 01 02 40 43 80 00 00 skb tailroom: 00000000: ... skb tailroom: 00000010: ... skb tailroom: 00000020: ... skb tailroom: 00000030: ...

Call Trace, how it happens exactly: ... macvlan_handle_frame+0x321/0x425 [macvlan] ? macvlan_forward_source+0x110/0x110 [macvlan] __netif_receive_skb_core+0x545/0xda0 ? enqueue_task_fair+0xe5/0x8e0 ? __netif_receive_skb_one_core+0x36/0x70 __netif_receive_skb_one_core+0x36/0x70 process_backlog+0x97/0x140 net_rx_action+0x1eb/0x350 ? __hrtimer_run_queues+0x136/0x2e0 __do_softirq+0xe3/0x383 do_softirq_own_stack+0x2a/0x40 </IRQ> do_softirq.part.4+0x4e/0x50 netif_rx_ni+0x60/0xd0 dev_loopback_xmit+0x83/0xf0 ip6_finish_output2+0x575/0x590 [ipv6] ? ip6_cork_release.isra.1+0x64/0x90 [ipv6] ? __ip6_make_skb+0x38d/0x680 [ipv6] ? ip6_output+0x6c/0x140 [ipv6] ip6_output+0x6c/0x140 [ipv6] ip6_send_skb+0x1e/0x60 [ipv6] rawv6_sendmsg+0xc4b/0xe10 [ipv6] ? proc_put_long+0xd0/0xd0 ? rw_copy_check_uvector+0x4e/0x110 ? sock_sendmsg+0x36/0x40 sock_sendmsg+0x36/0x40 ___sys_sendmsg+0x2b6/0x2d0 ? proc_dointvec+0x23/0x30 ? addrconf_sysctl_forward+0x8d/0x250 [ipv6] ? dev_forward_change+0x130/0x130 [ipv6] ? _raw_spin_unlock+0x12/0x30 ? proc_sys_call_handler.isra.14+0x9f/0x110 ? __call_rcu+0x213/0x510 ? get_max_files+0x10/0x10 ? trace_hardirqs_on+0x2c/0xe0 ? __sys_sendmsg+0x63/0xa0 __sys_sendmsg+0x63/0xa0 do_syscall_64+0x6c/0x1e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: Alexander Sverdlin alexander.sverdlin@nokia.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/macvlan.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 225bfc808112..349123592af0 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -451,6 +451,10 @@ static rx_handler_result_t macvlan_handle_frame(struct sk_buff **pskb) int ret; rx_handler_result_t handle_res;

+ /* Packets from dev_loopback_xmit() do not have L2 header, bail out */ + if (unlikely(skb->pkt_type == PACKET_LOOPBACK)) + return RX_HANDLER_PASS; + port = macvlan_port_get_rcu(skb->dev); if (is_multicast_ether_addr(eth->h_dest)) { unsigned int hash;

From: YuanJunQing yuanjunqing66@163.com

[ Upstream commit 31e1b3efa802f97a17628dde280006c4cee4ce5e ]

Register "a1" is unsaved in this function, when CONFIG_TRACE_IRQFLAGS is enabled, the TRACE_IRQS_OFF macro will call trace_hardirqs_off(), and this may change register "a1". The changed register "a1" as argument will be send to do_fpe() and do_msa_fpe().

Signed-off-by: YuanJunQing yuanjunqing66@163.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/mips/kernel/genex.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index 6c257b52f57f..7fad007fe025 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -477,20 +477,20 @@ NESTED(nmi_handler, PT_SIZE, sp) .endm

.macro __build_clear_fpe + CLI + TRACE_IRQS_OFF .set push /* gas fails to assemble cfc1 for some archs (octeon).*/ \ .set mips1 SET_HARDFLOAT cfc1 a1, fcr31 .set pop - CLI - TRACE_IRQS_OFF .endm

.macro __build_clear_msa_fpe - _cfcmsa a1, MSA_CSR CLI TRACE_IRQS_OFF + _cfcmsa a1, MSA_CSR .endm

.macro __build_clear_ade