From: Alain Volmat alain.volmat@st.com

commit 52d3be711e065a97a57c2f2ffba3098748855bd6 upstream.

The IP can handle two slave addresses. One address can either be 7 bits or 10 bits while the other can only be 7 bits. In order to ensure that a 10 bits address can always be allocated (assuming there is only one 7 bits address already allocated), pick up the 7-bits only address slot in priority when performing a 7-bits address allocation.

Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support") Signed-off-by: Alain Volmat alain.volmat@st.com Reviewed-by: Pierre-Yves MORDRET pierre-yves.mordret@st.com Signed-off-by: Wolfram Sang wsa@the-dreams.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/i2c/busses/i2c-stm32f7.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index f4e3613..144f305 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -1252,7 +1252,7 @@ static int stm32f7_i2c_get_free_slave_id(struct stm32f7_i2c_dev *i2c_dev, * slave[0] supports 7-bit and 10-bit slave address * slave[1] supports 7-bit slave address only */ - for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) { + for (i = STM32F7_I2C_MAX_SLAVE - 1; i >= 0; i--) { if (i == 1 && (slave->flags & I2C_CLIENT_PEC)) continue; if (!i2c_dev->slave[i]) {

From: Jarkko Nikula jarkko.nikula@linux.intel.com

commit 3f31bc67e4dc6a555341dffefe328ddd58e8b431 upstream.

It turned out Intel Gemini Lake doesn't use the same I2C timing parameters as Broxton.

I got confirmation from the Windows team that Gemini Lake systems should use updated timing parameters that differ from those used in Broxton based systems.

Fixes: f80e78aa11ad ("mfd: intel-lpss: Add Intel Gemini Lake PCI IDs") Tested-by: Chris Chiu chiu@endlessm.com Signed-off-by: Jarkko Nikula jarkko.nikula@linux.intel.com Acked-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/mfd/intel-lpss-pci.c | 28 ++++++++++++++++++++-------- 1 file changed, 20 insertions(+), 8 deletions(-)

diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c index c37c8bb8..742d6c1 100644 --- a/drivers/mfd/intel-lpss-pci.c +++ b/drivers/mfd/intel-lpss-pci.c @@ -126,6 +126,18 @@ static void intel_lpss_pci_remove(struct pci_dev *pdev) .properties = apl_i2c_properties, };

+static struct property_entry glk_i2c_properties[] = { + PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 313), + PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171), + PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 290), + { }, +}; + +static const struct intel_lpss_platform_info glk_i2c_info = { + .clk_rate = 133000000, + .properties = glk_i2c_properties, +}; + static const struct intel_lpss_platform_info cnl_i2c_info = { .clk_rate = 216000000, .properties = spt_i2c_properties, @@ -165,14 +177,14 @@ static void intel_lpss_pci_remove(struct pci_dev *pdev) { PCI_VDEVICE(INTEL, 0x1ac6), (kernel_ulong_t)&bxt_info }, { PCI_VDEVICE(INTEL, 0x1aee), (kernel_ulong_t)&bxt_uart_info }, /* GLK */ - { PCI_VDEVICE(INTEL, 0x31ac), (kernel_ulong_t)&bxt_i2c_info }, - { PCI_VDEVICE(INTEL, 0x31ae), (kernel_ulong_t)&bxt_i2c_info }, - { PCI_VDEVICE(INTEL, 0x31b0), (kernel_ulong_t)&bxt_i2c_info }, - { PCI_VDEVICE(INTEL, 0x31b2), (kernel_ulong_t)&bxt_i2c_info }, - { PCI_VDEVICE(INTEL, 0x31b4), (kernel_ulong_t)&bxt_i2c_info }, - { PCI_VDEVICE(INTEL, 0x31b6), (kernel_ulong_t)&bxt_i2c_info }, - { PCI_VDEVICE(INTEL, 0x31b8), (kernel_ulong_t)&bxt_i2c_info }, - { PCI_VDEVICE(INTEL, 0x31ba), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x31ac), (kernel_ulong_t)&glk_i2c_info }, + { PCI_VDEVICE(INTEL, 0x31ae), (kernel_ulong_t)&glk_i2c_info }, + { PCI_VDEVICE(INTEL, 0x31b0), (kernel_ulong_t)&glk_i2c_info }, + { PCI_VDEVICE(INTEL, 0x31b2), (kernel_ulong_t)&glk_i2c_info }, + { PCI_VDEVICE(INTEL, 0x31b4), (kernel_ulong_t)&glk_i2c_info }, + { PCI_VDEVICE(INTEL, 0x31b6), (kernel_ulong_t)&glk_i2c_info }, + { PCI_VDEVICE(INTEL, 0x31b8), (kernel_ulong_t)&glk_i2c_info }, + { PCI_VDEVICE(INTEL, 0x31ba), (kernel_ulong_t)&glk_i2c_info }, { PCI_VDEVICE(INTEL, 0x31bc), (kernel_ulong_t)&bxt_uart_info }, { PCI_VDEVICE(INTEL, 0x31be), (kernel_ulong_t)&bxt_uart_info }, { PCI_VDEVICE(INTEL, 0x31c0), (kernel_ulong_t)&bxt_uart_info },

From: Tyrel Datwyler tyreld@linux.ibm.com

commit 0a87ccd3699983645f54cafd2258514a716b20b8 upstream.

Advertise client support for the PAPR architected ibm,drc-info device tree property during CAS handshake.

Fixes: c7a3275e0f9e ("powerpc/pseries: Revert support for ibm,drc-info devtree property") Signed-off-by: Tyrel Datwyler tyreld@linux.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/1573449697-5448-11-git-send-email-tyreld@linux.ibm... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/powerpc/kernel/prom_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 9b38a2e..af1e38f 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -904,7 +904,7 @@ struct ibm_arch_vec __cacheline_aligned ibm_architecture_vec = { .reserved2 = 0, .reserved3 = 0, .subprocessors = 1, - .byte22 = OV5_FEAT(OV5_DRMEM_V2), + .byte22 = OV5_FEAT(OV5_DRMEM_V2) | OV5_FEAT(OV5_DRC_INFO), .intarch = 0, .mmu = 0, .hash_ext = 0,

From: Hoang Le hoang.h.le@dektech.com.au

commit 46cb01eeeb86fca6afe24dda1167b0cb95424e29 upstream.

In commit 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values"), the 32-bit node address only generated after one second trial period expired. However the self's addr in struct tipc_monitor do not update according to node address generated. This lead to it is always zero as initial value. As result, sorting algorithm using this value does not work as expected, neither neighbor monitoring framework.

In this commit, we add a fix to update self's addr when 32-bit node address generated.

Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values") Acked-by: Jon Maloy jon.maloy@ericsson.com Signed-off-by: Hoang Le hoang.h.le@dektech.com.au Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- net/tipc/monitor.c | 15 +++++++++++++++ net/tipc/monitor.h | 1 + net/tipc/net.c | 2 ++ 3 files changed, 18 insertions(+)

diff --git a/net/tipc/monitor.c b/net/tipc/monitor.c index 67f6938..23706ee 100644 --- a/net/tipc/monitor.c +++ b/net/tipc/monitor.c @@ -665,6 +665,21 @@ void tipc_mon_delete(struct net *net, int bearer_id) kfree(mon); }

+void tipc_mon_reinit_self(struct net *net) +{ + struct tipc_monitor *mon; + int bearer_id; + + for (bearer_id = 0; bearer_id < MAX_BEARERS; bearer_id++) { + mon = tipc_monitor(net, bearer_id); + if (!mon) + continue; + write_lock_bh(&mon->lock); + mon->self->addr = tipc_own_addr(net); + write_unlock_bh(&mon->lock); + } +} + int tipc_nl_monitor_set_threshold(struct net *net, u32 cluster_size) { struct tipc_net *tn = tipc_net(net); diff --git a/net/tipc/monitor.h b/net/tipc/monitor.h index 2a21b93..ed63d2e 100644 --- a/net/tipc/monitor.h +++ b/net/tipc/monitor.h @@ -77,6 +77,7 @@ int __tipc_nl_add_monitor(struct net *net, struct tipc_nl_msg *msg, u32 bearer_id); int tipc_nl_add_monitor_peer(struct net *net, struct tipc_nl_msg *msg, u32 bearer_id, u32 *prev_node); +void tipc_mon_reinit_self(struct net *net);

extern const int tipc_max_domain_size; #endif diff --git a/net/tipc/net.c b/net/tipc/net.c index 7ce1e86..2e2e938 100644 --- a/net/tipc/net.c +++ b/net/tipc/net.c @@ -42,6 +42,7 @@ #include "node.h" #include "bcast.h" #include "netlink.h" +#include "monitor.h"

/* * The TIPC locking policy is designed to ensure a very fine locking @@ -136,6 +137,7 @@ static void tipc_net_finalize(struct net *net, u32 addr) tipc_set_node_addr(net, addr); tipc_named_reinit(net); tipc_sk_reinit(net); + tipc_mon_reinit_self(net); tipc_nametbl_publish(net, TIPC_CFG_SRV, addr, addr, TIPC_CLUSTER_SCOPE, 0, addr); }

From: Lorenzo Bianconi lorenzo@kernel.org

commit 15e14f76f85f4f0eab3b8146e1cd3c58ce272823 upstream.

Fix bbp ready check in mt7601u_wait_bbp_ready. The issue is reported by coverity with the following error:

Logical vs. bitwise operator The expression's value does not depend on the operands; inadvertent use of the wrong operator is a likely logic error.

Addresses-Coverity-ID: 1309441 ("Logical vs. bitwise operator") Fixes: c869f77d6abb ("add mt7601u driver") Acked-by: Jakub Kicinski kubakici@wp.pl Signed-off-by: Lorenzo Bianconi lorenzo@kernel.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/wireless/mediatek/mt7601u/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt7601u/phy.c b/drivers/net/wireless/mediatek/mt7601u/phy.c index b804abd..539f781 100644 --- a/drivers/net/wireless/mediatek/mt7601u/phy.c +++ b/drivers/net/wireless/mediatek/mt7601u/phy.c @@ -221,7 +221,7 @@ int mt7601u_wait_bbp_ready(struct mt7601u_dev *dev)

do { val = mt7601u_bbp_rr(dev, MT_BBP_REG_VERSION); - if (val && ~val) + if (val && val != 0xff) break; } while (--i);

From: Arnaldo Carvalho de Melo acme@redhat.com

commit f068435d9bb2d825d59e3c101bc579f09315ee01 upstream.

At some point in the past we needed to make sure we would get the long name of modules and not just what we get from /proc/modules, but that need, as described in the cset that introduced the adjustment function:

Fixes: c03d5184f0e9 ("perf machine: Adjust dso->long_name for offline module")

Without using the buildid-cache:

# lsmod | grep trusted # insmod trusted.ko # lsmod | grep trusted trusted 24576 0 # strace -e open,openat perf probe -m ./trusted.ko key_seal |& grep trusted openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 4 openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 7 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/.debug/root/trusted.ko/dd3d355d567394d540f527e093e0f64b95879584/probes", O_RDWR|O_CREAT, 0644) = 3 openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/.debug/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, ".debug/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 4 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 probe:key_seal (on key_seal in trusted) # perf probe -l probe:key_seal (on key_seal in trusted) #

No attempt at opening '[trusted]'.

Now using the build-id cache:

# rmmod trusted # perf buildid-cache --add ./trusted.ko # insmod trusted.ko # strace -e open,openat perf probe -m ./trusted.ko key_seal |& grep trusted openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 4 openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 7 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/.debug/root/trusted.ko/dd3d355d567394d540f527e093e0f64b95879584/probes", O_RDWR|O_CREAT, 0644) = 3 openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/.debug/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, ".debug/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 4 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 #

Again, no attempt at reading '[trusted]'.

Finally, adding a probe to that function and then using:

[root@quaco ~]# perf trace -e probe_perf:*/max-stack=16/ --max-events=2 0.000 perf/13456 probe_perf:dso__adjust_kmod_long_name(__probe_ip: 5492263) dso__adjust_kmod_long_name (/home/acme/bin/perf) machine__process_kernel_mmap_event (/home/acme/bin/perf) machine__process_mmap_event (/home/acme/bin/perf) perf_event__process_mmap (/home/acme/bin/perf) machines__deliver_event (/home/acme/bin/perf) perf_session__deliver_event (/home/acme/bin/perf) perf_session__process_event (/home/acme/bin/perf) process_simple (/home/acme/bin/perf) reader__process_events (/home/acme/bin/perf) __perf_session__process_events (/home/acme/bin/perf) perf_session__process_events (/home/acme/bin/perf) process_buildids (/home/acme/bin/perf) record__finish_output (/home/acme/bin/perf) __cmd_record (/home/acme/bin/perf) cmd_record (/home/acme/bin/perf) run_builtin (/home/acme/bin/perf) 0.055 perf/13456 probe_perf:dso__adjust_kmod_long_name(__probe_ip: 5492263) dso__adjust_kmod_long_name (/home/acme/bin/perf) machine__process_kernel_mmap_event (/home/acme/bin/perf) machine__process_mmap_event (/home/acme/bin/perf) perf_event__process_mmap (/home/acme/bin/perf) machines__deliver_event (/home/acme/bin/perf) perf_session__deliver_event (/home/acme/bin/perf) perf_session__process_event (/home/acme/bin/perf) process_simple (/home/acme/bin/perf) reader__process_events (/home/acme/bin/perf) __perf_session__process_events (/home/acme/bin/perf) perf_session__process_events (/home/acme/bin/perf) process_buildids (/home/acme/bin/perf) record__finish_output (/home/acme/bin/perf) __cmd_record (/home/acme/bin/perf) cmd_record (/home/acme/bin/perf) run_builtin (/home/acme/bin/perf) #

This was the only path I could find using the perf tools that reach at this function, then as of november/2019, if we put a probe in the line where the actuall setting of the dso->long_name is done:

# perf trace -e probe_perf:* ^C[root@quaco ~] # perf stat -e probe_perf:* -I 2000 2.000404265 0 probe_perf:dso__adjust_kmod_long_name 4.001142200 0 probe_perf:dso__adjust_kmod_long_name 6.001704120 0 probe_perf:dso__adjust_kmod_long_name 8.002398316 0 probe_perf:dso__adjust_kmod_long_name 10.002984010 0 probe_perf:dso__adjust_kmod_long_name 12.003597851 0 probe_perf:dso__adjust_kmod_long_name 14.004113303 0 probe_perf:dso__adjust_kmod_long_name 16.004582773 0 probe_perf:dso__adjust_kmod_long_name 18.005176373 0 probe_perf:dso__adjust_kmod_long_name 20.005801605 0 probe_perf:dso__adjust_kmod_long_name 22.006467540 0 probe_perf:dso__adjust_kmod_long_name ^C 23.683261941 0 probe_perf:dso__adjust_kmod_long_name

#

Its not being used at all.

To further test this I used kvm.ko as the offline module, i.e. removed if from the buildid-cache by nuking it completely (rm -rf ~/.debug) and moved it from the normal kernel distro path, removed the modules, stoped the kvm guest, and then installed it manually, etc.

# rmmod kvm-intel # rmmod kvm # lsmod | grep kvm # modprobe kvm-intel modprobe: ERROR: ctx=0x55d3b1722260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory modprobe: ERROR: ctx=0x55d3b1722260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory modprobe: ERROR: could not insert 'kvm_intel': Unknown symbol in module, or unknown parameter (see dmesg) # insmod ./kvm.ko # modprobe kvm-intel modprobe: ERROR: ctx=0x562f34026260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory modprobe: ERROR: ctx=0x562f34026260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory # lsmod | grep kvm kvm_intel 299008 0 kvm 765952 1 kvm_intel irqbypass 16384 1 kvm # # perf probe -x ~/bin/perf machine__findnew_module_map:12 mname=m.name:string filename=filename:string 'dso_long_name=map->dso->long_name:string' 'dso_name=map->dso->name:string' # perf probe -l probe_perf:machine__findnew_module_map (on machine__findnew_module_map:12@util/machine.c in /home/acme/bin/perf with mname filename dso_long_name dso_name) # perf record ^C[ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 3.416 MB perf.data (33956 samples) ] # perf trace -e probe_perf:machine* <SNIP> 6.322 perf/23099 probe_perf:machine__findnew_module_map(__probe_ip: 5492493, mname: "[salsa20_generic]", filename: "/lib/modules/5.3.8-200.fc30.x86_64/kernel/crypto/salsa20_generic.ko.xz", dso_long_name: "/lib/modules/5.3.8-200.fc30.x86_64/kernel/crypto/salsa20_generic.ko.xz", dso_name: "[salsa20_generic]") 6.375 perf/23099 probe_perf:machine__findnew_module_map(__probe_ip: 5492493, mname: "[kvm]", filename: "[kvm]", dso_long_name: "[kvm]", dso_name: "[kvm]") <SNIP>

The filename doesn't come with the path, no point in trying to set the dso->long_name.

[root@quaco ~]# strace -e open,openat perf probe -m ./kvm.ko kvm_apic_local_deliver |& egrep 'open.*kvm' openat(AT_FDCWD, "/sys/module/kvm_intel/notes/.note.gnu.build-id", O_RDONLY) = 4 openat(AT_FDCWD, "/sys/module/kvm/notes/.note.gnu.build-id", O_RDONLY) = 4 openat(AT_FDCWD, "/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 7 openat(AT_FDCWD, "/sys/module/kvm_intel/notes/.note.gnu.build-id", O_RDONLY) = 8 openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/.debug/root/kvm.ko/5955f426cb93f03f30f3e876814be2db80ab0b55/probes", O_RDWR|O_CREAT, 0644) = 3 openat(AT_FDCWD, "/usr/lib/debug/root/kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/debug/root/kvm.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/.debug/kvm.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 openat(AT_FDCWD, "kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, ".debug/kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 4 openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 [root@quaco ~]#

Cc: Adrian Hunter adrian.hunter@intel.com Cc: Andi Kleen ak@linux.intel.com Cc: Jiri Olsa jolsa@kernel.org Cc: Namhyung Kim namhyung@kernel.org Cc: Wang Nan wangnan0@huawei.com Link: https://lkml.kernel.org/n/tip-jlfew3lyb24d58egrp0o72o2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- tools/perf/util/machine.c | 27 +-------------------------- 1 file changed, 1 insertion(+), 26 deletions(-)

diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c index 2cb7aed..f2cab24 100644 --- a/tools/perf/util/machine.c +++ b/tools/perf/util/machine.c @@ -681,24 +681,6 @@ int machine__process_switch_event(struct machine *machine __maybe_unused, return 0; }

-static void dso__adjust_kmod_long_name(struct dso *dso, const char *filename) -{ - const char *dup_filename; - - if (!filename || !dso || !dso->long_name) - return; - if (dso->long_name[0] != '[') - return; - if (!strchr(filename, '/')) - return; - - dup_filename = strdup(filename); - if (!dup_filename) - return; - - dso__set_long_name(dso, dup_filename, true); -} - struct map *machine__findnew_module_map(struct machine *machine, u64 start, const char *filename) { @@ -710,15 +692,8 @@ struct map *machine__findnew_module_map(struct machine *machine, u64 start, return NULL;

map = map_groups__find_by_name(&machine->kmaps, m.name); - if (map) { - /* - * If the map's dso is an offline module, give dso__load() - * a chance to find the file path of that module by fixing - * long_name. - */ - dso__adjust_kmod_long_name(map->dso, filename); + if (map) goto out; - }

dso = machine__findnew_module_dso(machine, &m, filename); if (dso == NULL)

From: Shuiqing Li shuiqing.li@unisoc.com

commit 39e68d9e7ab276880980ee5386301fb218202192 upstream.

The device driver data saved the 'struct sprd_wdt' object, it is incorrect to get 'struct watchdog_device' object from the driver data, thus fix it.

Fixes: 477603467009 ("watchdog: Add Spreadtrum watchdog driver") Reported-by: Dongwei Wang dongwei.wang@unisoc.com Signed-off-by: Shuiqing Li shuiqing.li@unisoc.com Signed-off-by: Baolin Wang baolin.wang@linaro.org Reviewed-by: Guenter Roeck linux@roeck-us.net Link: https://lore.kernel.org/r/76d4687189ec940baa90cb8d679a8d4c8f02ee80.157321040... Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Wim Van Sebroeck wim@linux-watchdog.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/watchdog/sprd_wdt.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/watchdog/sprd_wdt.c b/drivers/watchdog/sprd_wdt.c index ff9397d..b6c65af 100644 --- a/drivers/watchdog/sprd_wdt.c +++ b/drivers/watchdog/sprd_wdt.c @@ -342,10 +342,9 @@ static int sprd_wdt_probe(struct platform_device *pdev)

static int __maybe_unused sprd_wdt_pm_suspend(struct device *dev) { - struct watchdog_device *wdd = dev_get_drvdata(dev); struct sprd_wdt *wdt = dev_get_drvdata(dev);

- if (watchdog_active(wdd)) + if (watchdog_active(&wdt->wdd)) sprd_wdt_stop(&wdt->wdd); sprd_wdt_disable(wdt);

@@ -354,7 +353,6 @@ static int __maybe_unused sprd_wdt_pm_suspend(struct device *dev)

static int __maybe_unused sprd_wdt_pm_resume(struct device *dev) { - struct watchdog_device *wdd = dev_get_drvdata(dev); struct sprd_wdt *wdt = dev_get_drvdata(dev); int ret;

@@ -362,7 +360,7 @@ static int __maybe_unused sprd_wdt_pm_resume(struct device *dev) if (ret) return ret;

- if (watchdog_active(wdd)) { + if (watchdog_active(&wdt->wdd)) { ret = sprd_wdt_start(&wdt->wdd); if (ret) { sprd_wdt_disable(wdt);

From: Peter Rosin peda@axentia.se

[ Upstream commit 29feb2c960ab32fc24249443d4434194ce96f083 ]

AT91_PINCTRL_OUTPUT_VAL(0) without AT91_PINCTRL_OUTPUT is a no-op, so make sure the pins really output a zero.

Fixes: 0e4323899973 ("ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power") Signed-off-by: Peter Rosin peda@axentia.se Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts index af9f384..bfa5815a 100644 --- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts +++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts @@ -38,14 +38,16 @@ atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO - AT91_PINCTRL_OUTPUT_VAL(0)>; + (AT91_PINCTRL_OUTPUT | + AT91_PINCTRL_OUTPUT_VAL(0))>; };

pinctrl_lcd_hipow0: lcd_hipow0 { atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO - AT91_PINCTRL_OUTPUT_VAL(0)>; + (AT91_PINCTRL_OUTPUT | + AT91_PINCTRL_OUTPUT_VAL(0))>; }; }; };

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit 09c4b49457434fa74749ad6194ef28464d9f5df9 ]

This doesn't affect runtime because in the current code "idx" is always valid.

First, we read from "vgdev->capsets[idx].max_size" before checking whether "idx" is within bounds. And secondly the bounds check is off by one so we could end up reading one element beyond the end of the vgdev->capsets[] array.

Fixes: 62fb7a5e1096 ("virtio-gpu: add 3d/virgl support") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Link: http://patchwork.freedesktop.org/patch/msgid/20180704094250.m7sgvvzg3dhcvv3h... Signed-off-by: Gerd Hoffmann kraxel@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/gpu/drm/virtio/virtgpu_vq.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/virtio/virtgpu_vq.c b/drivers/gpu/drm/virtio/virtgpu_vq.c index c8a581b..608906f 100644 --- a/drivers/gpu/drm/virtio/virtgpu_vq.c +++ b/drivers/gpu/drm/virtio/virtgpu_vq.c @@ -650,11 +650,11 @@ int virtio_gpu_cmd_get_capset(struct virtio_gpu_device *vgdev, { struct virtio_gpu_get_capset *cmd_p; struct virtio_gpu_vbuffer *vbuf; - int max_size = vgdev->capsets[idx].max_size; + int max_size; struct virtio_gpu_drv_cap_cache *cache_ent; void *resp_buf;

- if (idx > vgdev->num_capsets) + if (idx >= vgdev->num_capsets) return -EINVAL;

if (version > vgdev->capsets[idx].max_version) @@ -664,6 +664,7 @@ int virtio_gpu_cmd_get_capset(struct virtio_gpu_device *vgdev, if (!cache_ent) return -ENOMEM;

+ max_size = vgdev->capsets[idx].max_size; cache_ent->caps_cache = kmalloc(max_size, GFP_KERNEL); if (!cache_ent->caps_cache) { kfree(cache_ent);

From: Tony Jones tonyj@suse.de

[ Upstream commit 5f997580e8b12b9f585e34cc16304925d26ce49e ]

The netperf benchmark shows a 5.73% reduction in throughput for small (64 byte) transfers by unconfined tasks.

DEFINE_AUDIT_SK() in aa_label_sk_perm() should not be performed unconditionally, rather only when the label is confined.

netperf-tcp 56974a6fc^ 56974a6fc Min 64 563.48 ( 0.00%) 531.17 ( -5.73%) Min 128 1056.92 ( 0.00%) 999.44 ( -5.44%) Min 256 1945.95 ( 0.00%) 1867.97 ( -4.01%) Min 1024 6761.40 ( 0.00%) 6364.23 ( -5.87%) Min 2048 11110.53 ( 0.00%) 10606.20 ( -4.54%) Min 3312 13692.67 ( 0.00%) 13158.41 ( -3.90%) Min 4096 14926.29 ( 0.00%) 14457.46 ( -3.14%) Min 8192 18399.34 ( 0.00%) 18091.65 ( -1.67%) Min 16384 21384.13 ( 0.00%) 21158.05 ( -1.06%) Hmean 64 564.96 ( 0.00%) 534.38 ( -5.41%) Hmean 128 1064.42 ( 0.00%) 1010.12 ( -5.10%) Hmean 256 1965.85 ( 0.00%) 1879.16 ( -4.41%) Hmean 1024 6839.77 ( 0.00%) 6478.70 ( -5.28%) Hmean 2048 11154.80 ( 0.00%) 10671.13 ( -4.34%) Hmean 3312 13838.12 ( 0.00%) 13249.01 ( -4.26%) Hmean 4096 15009.99 ( 0.00%) 14561.36 ( -2.99%) Hmean 8192 18975.57 ( 0.00%) 18326.54 ( -3.42%) Hmean 16384 21440.44 ( 0.00%) 21324.59 ( -0.54%) Stddev 64 1.24 ( 0.00%) 2.85 (-130.64%) Stddev 128 4.51 ( 0.00%) 6.53 ( -44.84%) Stddev 256 11.67 ( 0.00%) 8.50 ( 27.16%) Stddev 1024 48.33 ( 0.00%) 75.07 ( -55.34%) Stddev 2048 54.82 ( 0.00%) 65.16 ( -18.86%) Stddev 3312 153.57 ( 0.00%) 56.29 ( 63.35%) Stddev 4096 100.25 ( 0.00%) 88.50 ( 11.72%) Stddev 8192 358.13 ( 0.00%) 169.99 ( 52.54%) Stddev 16384 43.99 ( 0.00%) 141.82 (-222.39%)

Signed-off-by: Tony Jones tonyj@suse.de Fixes: 56974a6fcfef ("apparmor: add base infastructure for socket mediation") Signed-off-by: John Johansen john.johansen@canonical.com Signed-off-by: Sasha Levin sashal@kernel.org

Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- security/apparmor/net.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/security/apparmor/net.c b/security/apparmor/net.c index bb24cfa..d5d72dd 100644 --- a/security/apparmor/net.c +++ b/security/apparmor/net.c @@ -146,17 +146,20 @@ int aa_af_perm(struct aa_label *label, const char *op, u32 request, u16 family, static int aa_label_sk_perm(struct aa_label *label, const char *op, u32 request, struct sock *sk) { - struct aa_profile *profile; - DEFINE_AUDIT_SK(sa, op, sk); + int error = 0;

AA_BUG(!label); AA_BUG(!sk);

- if (unconfined(label)) - return 0; + if (!unconfined(label)) { + struct aa_profile *profile; + DEFINE_AUDIT_SK(sa, op, sk);

- return fn_for_each_confined(label, profile, - aa_profile_af_sk_perm(profile, &sa, request, sk)); + error = fn_for_each_confined(label, profile, + aa_profile_af_sk_perm(profile, &sa, request, sk)); + } + + return error; }

int aa_sk_perm(const char *op, u32 request, struct sock *sk)

From: Jann Horn jannh@google.com

[ Upstream commit 1f8266ff58840d698a1e96d2274189de1bdf7969 ]

As a comment above begin_current_label_crit_section() explains, begin_current_label_crit_section() must run in sleepable context because when label_is_stale() is true, aa_replace_current_label() runs, which uses prepare_creds(), which can sleep. Until now, the ptrace access check (which runs with a task lock held) violated this rule.

Also add a might_sleep() assertion to begin_current_label_crit_section(), because asserts are less likely to be ignored than comments.

Fixes: b2d09ae449ced ("apparmor: move ptrace checks to using labels") Signed-off-by: Jann Horn jannh@google.com Signed-off-by: John Johansen john.johansen@canonical.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- security/apparmor/include/cred.h | 2 ++ security/apparmor/lsm.c | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/security/apparmor/include/cred.h b/security/apparmor/include/cred.h index e287b7d..265ae66 100644 --- a/security/apparmor/include/cred.h +++ b/security/apparmor/include/cred.h @@ -151,6 +151,8 @@ static inline struct aa_label *begin_current_label_crit_section(void) { struct aa_label *label = aa_current_raw_label();

+ might_sleep(); + if (label_is_stale(label)) { label = aa_get_newest_label(label); if (aa_replace_current_label(label) == 0) diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c index 590ca7d..730de46 100644 --- a/security/apparmor/lsm.c +++ b/security/apparmor/lsm.c @@ -114,13 +114,13 @@ static int apparmor_ptrace_access_check(struct task_struct *child, struct aa_label *tracer, *tracee; int error;

- tracer = begin_current_label_crit_section(); + tracer = __begin_current_label_crit_section(); tracee = aa_get_task_label(child); error = aa_may_ptrace(tracer, tracee, (mode & PTRACE_MODE_READ) ? AA_PTRACE_READ : AA_PTRACE_TRACE); aa_put_label(tracee); - end_current_label_crit_section(tracer); + __end_current_label_crit_section(tracer);

return error; }

From: Stephen Boyd swboyd@chromium.org

[ Upstream commit 09ed061a4f56d50758851ca3997510f27115f81b ]

Now that the /firmware/coreboot node in DT is populated by the core DT platform code with commit 3aa0582fdb82 ("of: platform: populate /firmware/ node from of_platform_default_populate_init()") we should and can remove the platform device creation here. Otherwise, the of_platform_device_create() call will fail, the coreboot of driver won't be registered, and this driver will never bind. At the same time, we should move this driver to use MODULE_DEVICE_TABLE so that module auto-load works properly when the coreboot device is auto-populated and we should drop the of_node handling that was presumably placed here to hold a reference to the DT node created during module init that no longer happens.

Cc: Wei-Ning Huang wnhuang@chromium.org Cc: Julius Werner jwerner@chromium.org Reviewed-by: Brian Norris briannorris@chromium.org Cc: Samuel Holland samuel@sholland.org Reviewed-by: Sudeep Holla Sudeep.Holla@arm.com Fixes: 3aa0582fdb82 ("of: platform: populate /firmware/ node from of_platform_default_populate_init()") Signed-off-by: Stephen Boyd swboyd@chromium.org Reviewed-by: Julius Werner jwerner@chromium.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/firmware/google/coreboot_table-of.c | 28 +++------------------------- 1 file changed, 3 insertions(+), 25 deletions(-)

diff --git a/drivers/firmware/google/coreboot_table-of.c b/drivers/firmware/google/coreboot_table-of.c index f15bf40..9b90c0f 100644 --- a/drivers/firmware/google/coreboot_table-of.c +++ b/drivers/firmware/google/coreboot_table-of.c @@ -19,7 +19,6 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/of_address.h> -#include <linux/of_platform.h> #include <linux/platform_device.h>

#include "coreboot_table.h" @@ -30,7 +29,6 @@ static int coreboot_table_of_probe(struct platform_device *pdev) void __iomem *ptr;

ptr = of_iomap(fw_dn, 0); - of_node_put(fw_dn); if (!ptr) return -ENOMEM;

@@ -44,8 +42,9 @@ static int coreboot_table_of_remove(struct platform_device *pdev)

static const struct of_device_id coreboot_of_match[] = { { .compatible = "coreboot" }, - {}, + {} }; +MODULE_DEVICE_TABLE(of, coreboot_of_match);

static struct platform_driver coreboot_table_of_driver = { .probe = coreboot_table_of_probe, @@ -55,28 +54,7 @@ static int coreboot_table_of_remove(struct platform_device *pdev) .of_match_table = coreboot_of_match, }, }; - -static int __init platform_coreboot_table_of_init(void) -{ - struct platform_device *pdev; - struct device_node *of_node; - - /* Limit device creation to the presence of /firmware/coreboot node */ - of_node = of_find_node_by_path("/firmware/coreboot"); - if (!of_node) - return -ENODEV; - - if (!of_match_node(coreboot_of_match, of_node)) - return -ENODEV; - - pdev = of_platform_device_create(of_node, "coreboot_table_of", NULL); - if (!pdev) - return -ENODEV; - - return platform_driver_register(&coreboot_table_of_driver); -} - -module_init(platform_coreboot_table_of_init); +module_platform_driver(coreboot_table_of_driver);

MODULE_AUTHOR("Google, Inc."); MODULE_LICENSE("GPL");

From: "Eric W. Biederman" ebiederm@xmission.com

[ Upstream commit 8b9c6b28312cc51a87055e292b11c5aa28f0c935 ]

The ia64 handling of failure to setup a signal frame has been trying to set overlapping fields in struct siginfo since 2.3.43. The si_pid and si_uid fields are stomped when the si_addr field is set. The si_code of SI_KERNEL indicates that si_pid and si_uid should be valid, and that si_addr does not exist.

Being at odds with the definition of SI_KERNEL and with nothing to indicate that this was a signal frame setup failure there is no way for userspace to know that si_addr was filled out instead.

In practice failure to setup a signal frame is rare, and si_pid and si_uid are always set to 0 when si_code is SI_KERNEL so I expect no one has looked closely enough before to see this weirdness. Further the only difference between force_sigsegv_info and the generic force_sigsegv other than the return code is that force_sigsegv_info stomps the si_uid and si_pid fields.

Remove the bug and simplify the code by using force_sigsegv in this case just like other architectures.

Fixes: 2.3.43 Cc: Tony Luck tony.luck@intel.com Cc: Fenghua Yu fenghua.yu@intel.com Cc: linux-ia64@vger.kernel.org Acked-by: Tony Luck tony.luck@intel.com Signed-off-by: "Eric W. Biederman" ebiederm@xmission.com Signed-off-by: Sasha Levin sashal@kernel.org Conflicts: arch/ia64/kernel/signal.c [yyl: adjust context]

Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/ia64/kernel/signal.c | 48 +++++++++++------------------------------------ 1 file changed, 11 insertions(+), 37 deletions(-)

diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c index b08f6c2..f75a51a 100644 --- a/arch/ia64/kernel/signal.c +++ b/arch/ia64/kernel/signal.c @@ -232,37 +232,6 @@ }

static long -force_sigsegv_info (int sig, void __user *addr) -{ - unsigned long flags; - struct siginfo si; - - clear_siginfo(&si); - if (sig == SIGSEGV) { - /* - * Acquiring siglock around the sa_handler-update is almost - * certainly overkill, but this isn't a - * performance-critical path and I'd rather play it safe - * here than having to debug a nasty race if and when - * something changes in kernel/signal.c that would make it - * no longer safe to modify sa_handler without holding the - * lock. - */ - spin_lock_irqsave(&current->sighand->siglock, flags); - current->sighand->action[sig - 1].sa.sa_handler = SIG_DFL; - spin_unlock_irqrestore(&current->sighand->siglock, flags); - } - si.si_signo = SIGSEGV; - si.si_errno = 0; - si.si_code = SI_KERNEL; - si.si_pid = task_pid_vnr(current); - si.si_uid = from_kuid_munged(current_user_ns(), current_uid()); - si.si_addr = addr; - force_sig_info(SIGSEGV, &si, current); - return 1; -} - -static long setup_frame(struct ksignal *ksig, sigset_t *set, struct sigscratch *scr) { extern char __kernel_sigtramp[]; @@ -295,15 +264,18 @@ * instead so we will die with SIGSEGV. */ check_sp = (new_sp - sizeof(*frame)) & -STACK_ALIGN; - if (!likely(on_sig_stack(check_sp))) - return force_sigsegv_info(ksig->sig, (void __user *) - check_sp); + if (!likely(on_sig_stack(check_sp))) { + force_sigsegv(ksig->sig, current); + return 1; + } } } frame = (void __user *) ((new_sp - sizeof(*frame)) & -STACK_ALIGN);

if (!access_ok(frame, sizeof(*frame))) { - return force_sigsegv_info(ksig->sig, frame); + force_sigsegv(ksig->sig, current); + return 1; + }

err = __put_user(ksig->sig, &frame->arg0); err |= __put_user(&frame->info, &frame->arg1); @@ -317,8 +289,10 @@ err |= __save_altstack(&frame->sc.sc_stack, scr->pt.r12); err |= setup_sigcontext(&frame->sc, set, scr);

- if (unlikely(err)) - return force_sigsegv_info(ksig->sig, frame); + if (unlikely(err)) { + force_sigsegv(ksig->sig, current); + return 1; + }

scr->pt.r12 = (unsigned long) frame - 16; /* new stack pointer */ scr->pt.ar_fpsr = FPSR_DEFAULT; /* reset fpsr for signal handler */

From: Arnd Bergmann arnd@arndb.de

[ Upstream commit 18380dcc52cc8965e5144ce33fdfad7e168679a5 ]

The 'ret' variable is now only used in an #ifdef, and causes a warning if it is declared outside of that block:

sound/soc/codecs/wm9712.c: In function 'wm9712_soc_probe': sound/soc/codecs/wm9712.c:641:6: error: unused variable 'ret' [-Werror=unused-variable]

Fixes: 2ed1a8e0ce8d ("ASoC: wm9712: add ac97 new bus support") Signed-off-by: Arnd Bergmann arnd@arndb.de Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- sound/soc/codecs/wm9712.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index ade34c2..e873baa 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -638,13 +638,14 @@ static int wm9712_soc_probe(struct snd_soc_component *component) { struct wm9712_priv *wm9712 = snd_soc_component_get_drvdata(component); struct regmap *regmap; - int ret;

if (wm9712->mfd_pdata) { wm9712->ac97 = wm9712->mfd_pdata->ac97; regmap = wm9712->mfd_pdata->regmap; } else { #ifdef CONFIG_SND_SOC_AC97_BUS + int ret; + wm9712->ac97 = snd_soc_new_ac97_component(component, WM9712_VENDOR_ID, WM9712_VENDOR_ID_MASK); if (IS_ERR(wm9712->ac97)) {

From: Zhu Yanjun yanjun.zhu@oracle.com

[ Upstream commit 721ad7e643f7002efa398838693f90284ea216d1 ]

The buf is allocated by vmalloc_user in the function rxe_queue_init. So it is better to free it by vfree.

Fixes: 8700e3e7c485 ("Soft RoCE driver") Reviewed-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Zhu Yanjun yanjun.zhu@oracle.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/infiniband/sw/rxe/rxe_cq.c | 4 ++-- drivers/infiniband/sw/rxe/rxe_qp.c | 5 +++-- 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/sw/rxe/rxe_cq.c b/drivers/infiniband/sw/rxe/rxe_cq.c index 2ee4b08..a57276f 100644 --- a/drivers/infiniband/sw/rxe/rxe_cq.c +++ b/drivers/infiniband/sw/rxe/rxe_cq.c @@ -30,7 +30,7 @@ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ - +#include <linux/vmalloc.h> #include "rxe.h" #include "rxe_loc.h" #include "rxe_queue.h" @@ -97,7 +97,7 @@ int rxe_cq_from_init(struct rxe_dev *rxe, struct rxe_cq *cq, int cqe, err = do_mmap_info(rxe, uresp ? &uresp->mi : NULL, context, cq->queue->buf, cq->queue->buf_size, &cq->queue->ip); if (err) { - kvfree(cq->queue->buf); + vfree(cq->queue->buf); kfree(cq->queue); return err; } diff --git a/drivers/infiniband/sw/rxe/rxe_qp.c b/drivers/infiniband/sw/rxe/rxe_qp.c index c58452d..230697f 100644 --- a/drivers/infiniband/sw/rxe/rxe_qp.c +++ b/drivers/infiniband/sw/rxe/rxe_qp.c @@ -34,6 +34,7 @@ #include <linux/skbuff.h> #include <linux/delay.h> #include <linux/sched.h> +#include <linux/vmalloc.h>

#include "rxe.h" #include "rxe_loc.h" @@ -247,7 +248,7 @@ static int rxe_qp_init_req(struct rxe_dev *rxe, struct rxe_qp *qp, &qp->sq.queue->ip);

if (err) { - kvfree(qp->sq.queue->buf); + vfree(qp->sq.queue->buf); kfree(qp->sq.queue); return err; } @@ -300,7 +301,7 @@ static int rxe_qp_init_resp(struct rxe_dev *rxe, struct rxe_qp *qp, qp->rq.queue->buf, qp->rq.queue->buf_size, &qp->rq.queue->ip); if (err) { - kvfree(qp->rq.queue->buf); + vfree(qp->rq.queue->buf); kfree(qp->rq.queue); return err; }

From: Nicholas Mc Guire hofrat@osadl.org

[ Upstream commit 4ab2b48c98f2ec9712452d520a381917f91ac3d2 ]

The allocation with fsl_alloc_request() and kmalloc() were unchecked fixed this up with a NULL check and appropriate cleanup.

Additionally udc->ep_qh_size was reset to 0 on failure of allocation. Similar udc->phy_mode is initially 0 (as udc_controller was allocated with kzalloc in fsl_udc_probe()) so reset it to 0 as well so that this function is side-effect free on failure. Not clear if this is necessary or sensible as fsl_udc_release() probably can not be called if fsl_udc_probe() failed - but it should not hurt.

Signed-off-by: Nicholas Mc Guire hofrat@osadl.org Fixes: b504882da5 ("USB: add Freescale high-speed USB SOC device controller driver") Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/usb/gadget/udc/fsl_udc_core.c | 30 ++++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c index d44b26d..3676971 100644 --- a/drivers/usb/gadget/udc/fsl_udc_core.c +++ b/drivers/usb/gadget/udc/fsl_udc_core.c @@ -2247,8 +2247,10 @@ static int struct_udc_setup(struct fsl_udc *udc, udc->phy_mode = pdata->phy_mode;

udc->eps = kcalloc(udc->max_ep, sizeof(struct fsl_ep), GFP_KERNEL); - if (!udc->eps) - return -1; + if (!udc->eps) { + ERR("kmalloc udc endpoint status failed\n"); + goto eps_alloc_failed; + }

/* initialized QHs, take care of alignment */ size = udc->max_ep * sizeof(struct ep_queue_head); @@ -2262,8 +2264,7 @@ static int struct_udc_setup(struct fsl_udc *udc, &udc->ep_qh_dma, GFP_KERNEL); if (!udc->ep_qh) { ERR("malloc QHs for udc failed\n"); - kfree(udc->eps); - return -1; + goto ep_queue_alloc_failed; }

udc->ep_qh_size = size; @@ -2272,8 +2273,17 @@ static int struct_udc_setup(struct fsl_udc *udc, /* FIXME: fsl_alloc_request() ignores ep argument */ udc->status_req = container_of(fsl_alloc_request(NULL, GFP_KERNEL), struct fsl_req, req); + if (!udc->status_req) { + ERR("kzalloc for udc status request failed\n"); + goto udc_status_alloc_failed; + } + /* allocate a small amount of memory to get valid address */ udc->status_req->req.buf = kmalloc(8, GFP_KERNEL); + if (!udc->status_req->req.buf) { + ERR("kzalloc for udc request buffer failed\n"); + goto udc_req_buf_alloc_failed; + }

udc->resume_state = USB_STATE_NOTATTACHED; udc->usb_state = USB_STATE_POWERED; @@ -2281,6 +2291,18 @@ static int struct_udc_setup(struct fsl_udc *udc, udc->remote_wakeup = 0; /* default to 0 on reset */

return 0; + +udc_req_buf_alloc_failed: + kfree(udc->status_req); +udc_status_alloc_failed: + kfree(udc->ep_qh); + udc->ep_qh_size = 0; +ep_queue_alloc_failed: + kfree(udc->eps); +eps_alloc_failed: + udc->phy_mode = 0; + return -1; + }

/*----------------------------------------------------------------

From: Tomas Winkler tomas.winkler@intel.com

[ Upstream commit 03b2cbb6ea3c73e08fcf72d9ef8e286c4dcbd1fe ]

Looks like during merging the bulk POLL* -> EPOLL* replacement missed the patch 'commit af336cabe083 ("mei: limit the number of queued writes")'

Fix sparse warning: drivers/misc/mei/main.c:602:13: warning: restricted __poll_t degrades to integer drivers/misc/mei/main.c:605:30: warning: invalid assignment: |= drivers/misc/mei/main.c:605:30: left side has type restricted __poll_t drivers/misc/mei/main.c:605:30: right side has type int

Fixes: af336cabe083 ("mei: limit the number of queued writes") Signed-off-by: Tomas Winkler tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/misc/mei/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index 4d77a6a..87281b3 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -599,10 +599,10 @@ static __poll_t mei_poll(struct file *file, poll_table *wait) mei_cl_read_start(cl, mei_cl_mtu(cl), file); }

- if (req_events & (POLLOUT | POLLWRNORM)) { + if (req_events & (EPOLLOUT | EPOLLWRNORM)) { poll_wait(file, &cl->tx_wait, wait); if (cl->tx_cb_queued < dev->tx_queue_limit) - mask |= POLLOUT | POLLWRNORM; + mask |= EPOLLOUT | EPOLLWRNORM; }

out:

From: Nicolas Huaman nicolas@herochao.de

[ Upstream commit c369c8db15d51fa175d2ba85928f79d16af6b562 ]

A quirk in snd-usb-audio was added to automate setting sample rate to 4800k and remove the previously exposed nonfunctional microphone for the Bowers & Wilkins PX: commit 240a8af929c7c57dcde28682725b29cf8474e8e5 https://lore.kernel.org/patchwork/patch/919689/

However the headphones where updated shortly after that to remove the unintentional microphone functionality. I guess because of this the headphones now crash when connecting them via USB while the quirk is active. Dmesg:

snd-usb-audio: probe of 2-3:1.0 failed with error -22 usb 2-3: 2:1: cannot get min/max values for control 2 (id 2)

This patch removes the microfone and allows the headphones to connect and work out of the box. It is based on the current mainline kernel and successfully applied an tested on my machine (4.18.10.arch1-1).

Fixes: 240a8af929c7 ("ALSA: usb-audio: Add a quirck for B&W PX headphones") Signed-off-by: Nicolas Huaman nicolas@herochao.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- sound/usb/quirks-table.h | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 65f9c4b..90d4f61 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3349,19 +3349,14 @@ .ifnum = 0, .type = QUIRK_AUDIO_STANDARD_MIXER, }, - /* Capture */ - { - .ifnum = 1, - .type = QUIRK_IGNORE_INTERFACE, - }, /* Playback */ { - .ifnum = 2, + .ifnum = 1, .type = QUIRK_AUDIO_FIXED_ENDPOINT, .data = &(const struct audioformat) { .formats = SNDRV_PCM_FMTBIT_S16_LE, .channels = 2, - .iface = 2, + .iface = 1, .altsetting = 1, .altset_idx = 1, .attributes = UAC_EP_CS_ATTR_FILL_MAX |

From: "Spencer E. Olson" olsonse@umich.edu

[ Upstream commit 1cbca5852d6c16e85a21487a15d211195aacd4a1 ]

Fixes two problems introduced as early as commit 03aef4b6dc12 ("Staging: comedi: add ni_mio_common code"): (1) Ensures that the last four bits of NISTC_RTSI_TRIGB_OUT_REG register is not unduly overwritten on e-series devices. On e-series devices, the first three of the last four bits are reserved. The last bit defines the output selection of the RGOUT0 pin, otherwise known as RTSI_Sub_Selection. For m-series devices, these last four bits are indeed used as the output selection of the RTSI7 pin (and the RTSI_Sub_Selection bit for the RGOUT0 pin is moved to the RTSI_Trig_Direction register. (2) Allows all 4 RTSI_BRD lines to be treated as valid sources for RTSI lines.

This patch also cleans up the ni_get_rtsi_routing command for readability.

Fixes: 03aef4b6dc12 ("Staging: comedi: add ni_mio_common code") Signed-off-by: Spencer E. Olson olsonse@umich.edu Reviewed-by: Ian Abbott abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/staging/comedi/drivers/ni_mio_common.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c index d799b1b..747518c 100644 --- a/drivers/staging/comedi/drivers/ni_mio_common.c +++ b/drivers/staging/comedi/drivers/ni_mio_common.c @@ -4984,7 +4984,10 @@ static int ni_valid_rtsi_output_source(struct comedi_device *dev, case NI_RTSI_OUTPUT_G_SRC0: case NI_RTSI_OUTPUT_G_GATE0: case NI_RTSI_OUTPUT_RGOUT0: - case NI_RTSI_OUTPUT_RTSI_BRD_0: + case NI_RTSI_OUTPUT_RTSI_BRD(0): + case NI_RTSI_OUTPUT_RTSI_BRD(1): + case NI_RTSI_OUTPUT_RTSI_BRD(2): + case NI_RTSI_OUTPUT_RTSI_BRD(3): return 1; case NI_RTSI_OUTPUT_RTSI_OSC: return (devpriv->is_m_series) ? 1 : 0; @@ -5005,11 +5008,18 @@ static int ni_set_rtsi_routing(struct comedi_device *dev, devpriv->rtsi_trig_a_output_reg |= NISTC_RTSI_TRIG(chan, src); ni_stc_writew(dev, devpriv->rtsi_trig_a_output_reg, NISTC_RTSI_TRIGA_OUT_REG); - } else if (chan < 8) { + } else if (chan < NISTC_RTSI_TRIG_NUM_CHAN(devpriv->is_m_series)) { devpriv->rtsi_trig_b_output_reg &= ~NISTC_RTSI_TRIG_MASK(chan); devpriv->rtsi_trig_b_output_reg |= NISTC_RTSI_TRIG(chan, src); ni_stc_writew(dev, devpriv->rtsi_trig_b_output_reg, NISTC_RTSI_TRIGB_OUT_REG); + } else if (chan != NISTC_RTSI_TRIG_OLD_CLK_CHAN) { + /* probably should never reach this, since the + * ni_valid_rtsi_output_source above errors out if chan is too + * high + */ + dev_err(dev->class_dev, "%s: unknown rtsi channel\n", __func__); + return -EINVAL; } return 2; } @@ -5025,12 +5035,12 @@ static unsigned int ni_get_rtsi_routing(struct comedi_device *dev, } else if (chan < NISTC_RTSI_TRIG_NUM_CHAN(devpriv->is_m_series)) { return NISTC_RTSI_TRIG_TO_SRC(chan, devpriv->rtsi_trig_b_output_reg); - } else { - if (chan == NISTC_RTSI_TRIG_OLD_CLK_CHAN) - return NI_RTSI_OUTPUT_RTSI_OSC; - dev_err(dev->class_dev, "bug! should never get here?\n"); - return 0; + } else if (chan == NISTC_RTSI_TRIG_OLD_CLK_CHAN) { + return NI_RTSI_OUTPUT_RTSI_OSC; } + + dev_err(dev->class_dev, "%s: unknown rtsi channel\n", __func__); + return -EINVAL; }

static int ni_rtsi_insn_config(struct comedi_device *dev,

From: YueHaibing yuehaibing@huawei.com

[ Upstream commit b45e9d761ba2d60044b610297e3ef9f947ac157f ]

The variable 'aa_index' is defined as an unsigned value in update_lmb_associativity_index(), but find_aa_index() may return -1 when dlpar_clone_property() fails. So change find_aa_index() to return a bool, which indicates whether 'aa_index' was found or not.

Fixes: c05a5a40969e ("powerpc/pseries: Dynamic add entires to associativity lookup array") Signed-off-by: YueHaibing yuehaibing@huawei.com Reviewed-by: Nathan Fontenot nfont@linux.vnet.ibm.com> [mpe: Tweak changelog, rename is_found to just found] Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Sasha Levin sashal@kernel.org

Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/powerpc/platforms/pseries/hotplug-memory.c | 61 ++++++++++++------------- 1 file changed, 28 insertions(+), 33 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c index ad46eab..c2c6f32 100644 --- a/arch/powerpc/platforms/pseries/hotplug-memory.c +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c @@ -101,11 +101,12 @@ static struct property *dlpar_clone_property(struct property *prop, return new_prop; }

-static u32 find_aa_index(struct device_node *dr_node, - struct property *ala_prop, const u32 *lmb_assoc) +static bool find_aa_index(struct device_node *dr_node, + struct property *ala_prop, + const u32 *lmb_assoc, u32 *aa_index) { - u32 *assoc_arrays; - u32 aa_index; + u32 *assoc_arrays, new_prop_size; + struct property *new_prop; int aa_arrays, aa_array_entries, aa_array_sz; int i, index;

@@ -121,46 +122,39 @@ static u32 find_aa_index(struct device_node *dr_node, aa_array_entries = be32_to_cpu(assoc_arrays[1]); aa_array_sz = aa_array_entries * sizeof(u32);

- aa_index = -1; for (i = 0; i < aa_arrays; i++) { index = (i * aa_array_entries) + 2;

if (memcmp(&assoc_arrays[index], &lmb_assoc[1], aa_array_sz)) continue;

- aa_index = i; - break; + *aa_index = i; + return true; }

- if (aa_index == -1) { - struct property *new_prop; - u32 new_prop_size; - - new_prop_size = ala_prop->length + aa_array_sz; - new_prop = dlpar_clone_property(ala_prop, new_prop_size); - if (!new_prop) - return -1; - - assoc_arrays = new_prop->value; + new_prop_size = ala_prop->length + aa_array_sz; + new_prop = dlpar_clone_property(ala_prop, new_prop_size); + if (!new_prop) + return false;

- /* increment the number of entries in the lookup array */ - assoc_arrays[0] = cpu_to_be32(aa_arrays + 1); + assoc_arrays = new_prop->value;

- /* copy the new associativity into the lookup array */ - index = aa_arrays * aa_array_entries + 2; - memcpy(&assoc_arrays[index], &lmb_assoc[1], aa_array_sz); + /* increment the number of entries in the lookup array */ + assoc_arrays[0] = cpu_to_be32(aa_arrays + 1);

- of_update_property(dr_node, new_prop); + /* copy the new associativity into the lookup array */ + index = aa_arrays * aa_array_entries + 2; + memcpy(&assoc_arrays[index], &lmb_assoc[1], aa_array_sz);

- /* - * The associativity lookup array index for this lmb is - * number of entries - 1 since we added its associativity - * to the end of the lookup array. - */ - aa_index = be32_to_cpu(assoc_arrays[0]) - 1; - } + of_update_property(dr_node, new_prop);

- return aa_index; + /* + * The associativity lookup array index for this lmb is + * number of entries - 1 since we added its associativity + * to the end of the lookup array. + */ + *aa_index = be32_to_cpu(assoc_arrays[0]) - 1; + return true; }

static int update_lmb_associativity_index(struct drmem_lmb *lmb) @@ -169,6 +163,7 @@ static int update_lmb_associativity_index(struct drmem_lmb *lmb) struct property *ala_prop; const u32 *lmb_assoc; u32 aa_index; + bool found;

parent = of_find_node_by_path("/"); if (!parent) @@ -200,12 +195,12 @@ static int update_lmb_associativity_index(struct drmem_lmb *lmb) return -ENODEV; }

- aa_index = find_aa_index(dr_node, ala_prop, lmb_assoc); + found = find_aa_index(dr_node, ala_prop, lmb_assoc, &aa_index);

of_node_put(dr_node); dlpar_free_cc_nodes(lmb_node);

- if (aa_index < 0) { + if (!found) { pr_err("Could not find LMB associativity\n"); return -1; }

From: Christophe Leroy christophe.leroy@c-s.fr

[ Upstream commit fb978ca207743badfe7efd9eebe68bcbb4969f79 ]

Generic implementation fails to remove breakpoints after init when CONFIG_STRICT_KERNEL_RWX is selected:

[ 13.251285] KGDB: BP remove failed: c001c338 [ 13.259587] kgdbts: ERROR PUT: end of test buffer on 'do_fork_test' line 8 expected OK got $E14#aa [ 13.268969] KGDB: re-enter exception: ALL breakpoints killed [ 13.275099] CPU: 0 PID: 1 Comm: init Not tainted 4.18.0-g82bbb913ffd8 #860 [ 13.282836] Call Trace: [ 13.285313] [c60e1ba0] [c0080ef0] kgdb_handle_exception+0x6f4/0x720 (unreliable) [ 13.292618] [c60e1c30] [c000e97c] kgdb_handle_breakpoint+0x3c/0x98 [ 13.298709] [c60e1c40] [c000af54] program_check_exception+0x104/0x700 [ 13.305083] [c60e1c60] [c000e45c] ret_from_except_full+0x0/0x4 [ 13.310845] [c60e1d20] [c02a22ac] run_simple_test+0x2b4/0x2d4 [ 13.316532] [c60e1d30] [c0081698] put_packet+0xb8/0x158 [ 13.321694] [c60e1d60] [c00820b4] gdb_serial_stub+0x230/0xc4c [ 13.327374] [c60e1dc0] [c0080af8] kgdb_handle_exception+0x2fc/0x720 [ 13.333573] [c60e1e50] [c000e928] kgdb_singlestep+0xb4/0xcc [ 13.339068] [c60e1e70] [c000ae1c] single_step_exception+0x90/0xac [ 13.345100] [c60e1e80] [c000e45c] ret_from_except_full+0x0/0x4 [ 13.350865] [c60e1f40] [c000e11c] ret_from_syscall+0x0/0x38 [ 13.356346] Kernel panic - not syncing: Recursive entry to debugger

This patch creates powerpc specific version of kgdb_arch_set_breakpoint() and kgdb_arch_remove_breakpoint() using patch_instruction()

Fixes: 1e0fc9d1eb2b ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs") Signed-off-by: Christophe Leroy christophe.leroy@c-s.fr Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/powerpc/include/asm/kgdb.h | 5 ++++- arch/powerpc/kernel/kgdb.c | 43 +++++++++++++++++++++++++++++++++-------- 2 files changed, 39 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/include/asm/kgdb.h b/arch/powerpc/include/asm/kgdb.h index 9db24e7..a9e098a 100644 --- a/arch/powerpc/include/asm/kgdb.h +++ b/arch/powerpc/include/asm/kgdb.h @@ -26,9 +26,12 @@ #define BREAK_INSTR_SIZE 4 #define BUFMAX ((NUMREGBYTES * 2) + 512) #define OUTBUFMAX ((NUMREGBYTES * 2) + 512) + +#define BREAK_INSTR 0x7d821008 /* twge r2, r2 */ + static inline void arch_kgdb_breakpoint(void) { - asm(".long 0x7d821008"); /* twge r2, r2 */ + asm(stringify_in_c(.long BREAK_INSTR)); } #define CACHE_FLUSH_IS_SAFE 1 #define DBG_MAX_REG_NUM 70 diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 35e240a..59c578f 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -24,6 +24,7 @@ #include <asm/processor.h> #include <asm/machdep.h> #include <asm/debug.h> +#include <asm/code-patching.h> #include <linux/slab.h>

/* @@ -144,7 +145,7 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs) if (kgdb_handle_exception(1, SIGTRAP, 0, regs) != 0) return 0;

- if (*(u32 *) (regs->nip) == *(u32 *) (&arch_kgdb_ops.gdb_bpt_instr)) + if (*(u32 *)regs->nip == BREAK_INSTR) regs->nip += BREAK_INSTR_SIZE;

return 1; @@ -441,16 +442,42 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, return -1; }

+int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt) +{ + int err; + unsigned int instr; + unsigned int *addr = (unsigned int *)bpt->bpt_addr; + + err = probe_kernel_address(addr, instr); + if (err) + return err; + + err = patch_instruction(addr, BREAK_INSTR); + if (err) + return -EFAULT; + + *(unsigned int *)bpt->saved_instr = instr; + + return 0; +} + +int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt) +{ + int err; + unsigned int instr = *(unsigned int *)bpt->saved_instr; + unsigned int *addr = (unsigned int *)bpt->bpt_addr; + + err = patch_instruction(addr, instr); + if (err) + return -EFAULT; + + return 0; +} + /* * Global data */ -struct kgdb_arch arch_kgdb_ops = { -#ifdef __LITTLE_ENDIAN__ - .gdb_bpt_instr = {0x08, 0x10, 0x82, 0x7d}, -#else - .gdb_bpt_instr = {0x7d, 0x82, 0x10, 0x08}, -#endif -}; +struct kgdb_arch arch_kgdb_ops;

static int kgdb_not_implemented(struct pt_regs *regs) {

From: Maxime Ripard maxime.ripard@bootlin.com

[ Upstream commit 1e0ff648940e603cab6c52cf3723017d30d78f30 ]

The is_double flag is a boolean currently assigned to the value of the d variable, that is either 1 or 2. It means that this is_double variable is always set to true, even though the initial intent was to have it set to true when d is 2.

Fix this.

Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support") Reported-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Maxime Ripard maxime.ripard@bootlin.com Reviewed-by: Giulio Benetti giulio.benetti@micronovasrl.com Link: https://patchwork.freedesktop.org/patch/msgid/20181021163446.29135-2-maxime.... Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c index 3ecffa5..a74adec 100644 --- a/drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c @@ -52,7 +52,7 @@ static unsigned long sun4i_tmds_calc_divider(unsigned long rate, (rate - tmp_rate) < (rate - best_rate)) { best_rate = tmp_rate; best_m = m; - is_double = d; + is_double = (d == 2) ? true : false; } } }

From: Petr Machata petrm@mellanox.com

[ Upstream commit 0fe64023162aef123de2f1993ba13a35a786e1de ]

An MC-aware mode was introduced in commit 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports"). In MC-aware mode, BUM traffic gets a special treatment by being assigned to a separate set of traffic classes 8..15. Pairs of TCs 0 and 8, 1 and 9, etc., are then configured to strictly prioritize the lower-numbered ones. The intention is to prevent BUM traffic from flooding the switch and push out all UC traffic, which would otherwise happen, and instead give UC traffic precedence.

However strictly prioritizing UC traffic has the effect that UC overload pushes out all BUM traffic, such as legitimate ARP queries. These packets are kept in queues for a while, but under sustained UC overload, their lifetime eventually expires and these packets are dropped. That is detrimental to network performance as well.

Therefore configure the MC TCs (8..15) with minimum shaper of 200Mbps (a minimum permitted value) to allow a trickle of necessary control traffic to get through.

Fixes: 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") Signed-off-by: Petr Machata petrm@mellanox.com Signed-off-by: Ido Schimmel idosch@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 30ef318..5df9b25 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -2753,6 +2753,21 @@ int mlxsw_sp_port_ets_maxrate_set(struct mlxsw_sp_port *mlxsw_sp_port, return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(qeec), qeec_pl); }

+static int mlxsw_sp_port_min_bw_set(struct mlxsw_sp_port *mlxsw_sp_port, + enum mlxsw_reg_qeec_hr hr, u8 index, + u8 next_index, u32 minrate) +{ + struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; + char qeec_pl[MLXSW_REG_QEEC_LEN]; + + mlxsw_reg_qeec_pack(qeec_pl, mlxsw_sp_port->local_port, hr, index, + next_index); + mlxsw_reg_qeec_mise_set(qeec_pl, true); + mlxsw_reg_qeec_min_shaper_rate_set(qeec_pl, minrate); + + return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(qeec), qeec_pl); +} + int mlxsw_sp_port_prio_tc_set(struct mlxsw_sp_port *mlxsw_sp_port, u8 switch_prio, u8 tclass) { @@ -2830,6 +2845,16 @@ static int mlxsw_sp_port_ets_init(struct mlxsw_sp_port *mlxsw_sp_port) return err; }

+ /* Configure the min shaper for multicast TCs. */ + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { + err = mlxsw_sp_port_min_bw_set(mlxsw_sp_port, + MLXSW_REG_QEEC_HIERARCY_TC, + i + 8, i, + MLXSW_REG_QEEC_MIS_MIN); + if (err) + return err; + } + /* Map all priorities to traffic class 0. */ for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { err = mlxsw_sp_port_prio_tc_set(mlxsw_sp_port, i, 0);

From: Phil Elwell phil@raspberrypi.org

[ Upstream commit 227fa865061470a568858baa404a508f6c030fe4 ]

The size field in a Device Tree "reg" property is encoded in bytes, not words.

Fixes: 614fa22119d6 ("ARM: dts: bcm2835: Add VCHIQ node to the Raspberry Pi boards. (v3)") Signed-off-by: Phil Elwell phil@raspberrypi.org Acked-by: Stefan Wahren stefan.wahren@i2se.com Signed-off-by: Stefan Wahren stefan.wahren@i2se.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index cb2d6d7..c481eab 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -32,7 +32,7 @@

mailbox@7e00b840 { compatible = "brcm,bcm2835-vchiq"; - reg = <0x7e00b840 0xf>; + reg = <0x7e00b840 0x3c>; interrupts = <0 2>; }; };

From: Neil Armstrong narmstrong@baylibre.com

[ Upstream commit d801064cb871806e6843738ecad38993646f53f7 ]

The GPIOX tsin_a pins wrongly uses the SDCard pinctrl bits, this patch completely removes these pins entries until we find out what are the correct bits and registers to be used instead.

Fixes: 5a6ae9b80139 ("pinctrl: meson-gxl: add tsin_a pins") Signed-off-by: Neil Armstrong narmstrong@baylibre.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/pinctrl/meson/pinctrl-meson-gxl.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c index 158f618..0c0a501 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c +++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c @@ -239,13 +239,9 @@ static const unsigned int eth_act_led_pins[] = { GPIOZ_15 };

static const unsigned int tsin_a_d0_pins[] = { GPIODV_0 }; -static const unsigned int tsin_a_d0_x_pins[] = { GPIOX_10 }; static const unsigned int tsin_a_clk_pins[] = { GPIODV_8 }; -static const unsigned int tsin_a_clk_x_pins[] = { GPIOX_11 }; static const unsigned int tsin_a_sop_pins[] = { GPIODV_9 }; -static const unsigned int tsin_a_sop_x_pins[] = { GPIOX_8 }; static const unsigned int tsin_a_d_valid_pins[] = { GPIODV_10 }; -static const unsigned int tsin_a_d_valid_x_pins[] = { GPIOX_9 }; static const unsigned int tsin_a_fail_pins[] = { GPIODV_11 }; static const unsigned int tsin_a_dp_pins[] = { GPIODV_1, GPIODV_2, GPIODV_3, GPIODV_4, GPIODV_5, GPIODV_6, GPIODV_7, @@ -432,10 +428,6 @@ GROUP(spi_miso, 5, 2), GROUP(spi_ss0, 5, 1), GROUP(spi_sclk, 5, 0), - GROUP(tsin_a_sop_x, 6, 3), - GROUP(tsin_a_d_valid_x, 6, 2), - GROUP(tsin_a_d0_x, 6, 1), - GROUP(tsin_a_clk_x, 6, 0),

/* Bank Z */ GROUP(eth_mdio, 4, 23), @@ -698,8 +690,8 @@ };

static const char * const tsin_a_groups[] = { - "tsin_a_clk", "tsin_a_clk_x", "tsin_a_sop", "tsin_a_sop_x", - "tsin_a_d_valid", "tsin_a_d_valid_x", "tsin_a_d0", "tsin_a_d0_x", + "tsin_a_clk", "tsin_a_sop", + "tsin_a_d_valid", "tsin_a_d0", "tsin_a_dp", "tsin_a_fail", };

From: Christophe JAILLET christophe.jaillet@wanadoo.fr

[ Upstream commit 4d486f18d91b1876040bf87e9ad78981a08b15a6 ]

We return 0 unconditionally in 'rcar_du_crtc_set_crc_source()'. However, 'ret' is set to some error codes if some function calls fail.

Return 'ret' instead to propagate the error code.

Fixes: 47a52d024e89 ("media: drm: rcar-du: Add support for CRC computation") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Reviewed-by: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index 15dc9ca..212e5e1 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c @@ -837,7 +837,7 @@ static int rcar_du_crtc_set_crc_source(struct drm_crtc *crtc, drm_modeset_drop_locks(&ctx); drm_modeset_acquire_fini(&ctx);

- return 0; + return ret; }

static const struct drm_crtc_funcs crtc_funcs_gen2 = {

From: Lyude Paul lyude@redhat.com

[ Upstream commit c54c7374ff44de5e609506aca7c0deae4703b6d1 ]

Jerry Zuo pointed out a rather obscure hotplugging issue that it seems I accidentally introduced into DRM two years ago.

Pretend we have a topology like this:

|- DP-1: mst_primary |- DP-4: active display |- DP-5: disconnected |- DP-6: active hub |- DP-7: active display |- DP-8: disconnected |- DP-9: disconnected

If we unplug DP-6, the topology starting at DP-7 will be destroyed but it's payloads will live on in DP-1's VCPI allocations and thus require removal. However, this removal currently fails because drm_dp_update_payload_part1() will (rightly so) try to validate the port before accessing it, fail then abort. If we keep going, eventually we run the MST hub out of bandwidth and all new allocations will start to fail (or in my case; all new displays just start flickering a ton).

We could just teach drm_dp_update_payload_part1() not to drop the port ref in this case, but then we also need to teach drm_dp_destroy_payload_step1() to do the same thing, then hope no one ever adds anything to the that requires a validated port reference in drm_dp_destroy_connector_work(). Kind of sketchy.

So let's go with a more clever solution: any port that drm_dp_destroy_connector_work() interacts with is guaranteed to still exist in memory until we say so. While said port might not be valid we don't really care: that's the whole reason we're destroying it in the first place! So, teach drm_dp_get_validated_port_ref() to use the all mighty current_work() function to avoid attempting to validate ports from the context of mgr->destroy_connector_work. I can't see any situation where this wouldn't be safe, and this avoids having to play whack-a-mole in the future of trying to work around port validation.

Signed-off-by: Lyude Paul lyude@redhat.com Fixes: 263efde31f97 ("drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()") Reported-by: Jerry Zuo Jerry.Zuo@amd.com Cc: Jerry Zuo Jerry.Zuo@amd.com Cc: Harry Wentland Harry.Wentland@amd.com Cc: stable@vger.kernel.org # v4.6+ Reviewed-by: Dave Airlie airlied@redhat.com Link: https://patchwork.freedesktop.org/patch/msgid/20181113224613.28809-1-lyude@r... Signed-off-by: Sean Paul seanpaul@chromium.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/gpu/drm/drm_dp_mst_topology.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index 4d77158..58fe394 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -1022,9 +1022,20 @@ static struct drm_dp_mst_port *drm_dp_mst_get_port_ref_locked(struct drm_dp_mst_ static struct drm_dp_mst_port *drm_dp_get_validated_port_ref(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port) { struct drm_dp_mst_port *rport = NULL; + mutex_lock(&mgr->lock); - if (mgr->mst_primary) - rport = drm_dp_mst_get_port_ref_locked(mgr->mst_primary, port); + /* + * Port may or may not be 'valid' but we don't care about that when + * destroying the port and we are guaranteed that the port pointer + * will be valid until we've finished + */ + if (current_work() == &mgr->destroy_connector_work) { + kref_get(&port->kref); + rport = port; + } else if (mgr->mst_primary) { + rport = drm_dp_mst_get_port_ref_locked(mgr->mst_primary, + port); + } mutex_unlock(&mgr->lock); return rport; }

From: Geert Uytterhoeven geert+renesas@glider.be

[ Upstream commit 41e30b515a003a90e336b7a456c7c82d8c3aa6a7 ]

While commit 3b7e7848f0e88b36 ("arm64: dts: renesas: r8a7795: Add IPMMU device nodes") for R-Car H3 ES2.0 did include power-domains properties, they were forgotten in the counterpart for older R-Car H3 ES1.x SoCs.

Fixes: e4b9a493df45075b ("arm64: dts: renesas: r8a7795-es1: Add IPMMU device nodes") Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Signed-off-by: Simon Horman horms+renesas@verge.net.au Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index 7b2fbae..3dc61b7 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -28,6 +28,7 @@ compatible = "renesas,ipmmu-r8a7795"; reg = <0 0xec680000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 5>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; #iommu-cells = <1>; };

@@ -35,6 +36,7 @@ compatible = "renesas,ipmmu-r8a7795"; reg = <0 0xe7730000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 8>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; #iommu-cells = <1>; };

From: Mitko Haralanov mitko.haralanov@intel.com

[ Upstream commit fe4dd4239277486ca3a468e7bbeafd7ef3a5634e ]

A CA is supposed to ignore FECN bits in multicast, ACK, and CNP packets. This patch corrects the behavior of the HFI1 driver in this regard by ignoring FECNs in those packet types.

While fixing the above behavior, fix the extraction of the FECN and BECN bits from the packet headers for both 9B and 16B packets.

Furthermore, this patch corrects the driver's response to a FECN in RDMA READ RESPONSE packets. Instead of sending an "empty" ACK, the driver now sends a CNP packet. While editing that code path, add the missing trace for CNP packets.

Fixes: 88733e3b8450 ("IB/hfi1: Add 16B UD support") Fixes: f59fb9e05109 ("IB/hfi1: Fix handling of FECN marked multicast packet") Reviewed-by: Kaike Wan kaike.wan@intel.com Reviewed-by: Mike Marciniszyn mike.marciniszyn@intel.com Reviewed-by: Dennis Dalessandro dennis.dalessandro@intel.com Signed-off-by: Mitko Haralanov mitko.haralanov@intel.com Signed-off-by: Dennis Dalessandro dennis.dalessandro@intel.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/infiniband/hw/hfi1/driver.c | 70 +++++++++++++++++++++++++------------ drivers/infiniband/hw/hfi1/hfi.h | 35 +++++++++++++------ drivers/infiniband/hw/hfi1/rc.c | 30 ++++++---------- drivers/infiniband/hw/hfi1/uc.c | 2 +- drivers/infiniband/hw/hfi1/ud.c | 33 ++++++++++------- 5 files changed, 104 insertions(+), 66 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/driver.c b/drivers/infiniband/hw/hfi1/driver.c index a41f855..d5277c2 100644 --- a/drivers/infiniband/hw/hfi1/driver.c +++ b/drivers/infiniband/hw/hfi1/driver.c @@ -430,40 +430,60 @@ static inline void init_packet(struct hfi1_ctxtdata *rcd, [HFI1_PKT_TYPE_16B] = &return_cnp_16B };

-void hfi1_process_ecn_slowpath(struct rvt_qp *qp, struct hfi1_packet *pkt, - bool do_cnp) +/** + * hfi1_process_ecn_slowpath - Process FECN or BECN bits + * @qp: The packet's destination QP + * @pkt: The packet itself. + * @prescan: Is the caller the RXQ prescan + * + * Process the packet's FECN or BECN bits. By now, the packet + * has already been evaluated whether processing of those bit should + * be done. + * The significance of the @prescan argument is that if the caller + * is the RXQ prescan, a CNP will be send out instead of waiting for the + * normal packet processing to send an ACK with BECN set (or a CNP). + */ +bool hfi1_process_ecn_slowpath(struct rvt_qp *qp, struct hfi1_packet *pkt, + bool prescan) { struct hfi1_ibport *ibp = to_iport(qp->ibqp.device, qp->port_num); struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); struct ib_other_headers *ohdr = pkt->ohdr; struct ib_grh *grh = pkt->grh; - u32 rqpn = 0, bth1; + u32 rqpn = 0; u16 pkey; u32 rlid, slid, dlid = 0; - u8 hdr_type, sc, svc_type; - bool is_mcast = false; + u8 hdr_type, sc, svc_type, opcode; + bool is_mcast = false, ignore_fecn = false, do_cnp = false, + fecn, becn;

/* can be called from prescan */ if (pkt->etype == RHF_RCV_TYPE_BYPASS) { - is_mcast = hfi1_is_16B_mcast(dlid); pkey = hfi1_16B_get_pkey(pkt->hdr); sc = hfi1_16B_get_sc(pkt->hdr); dlid = hfi1_16B_get_dlid(pkt->hdr); slid = hfi1_16B_get_slid(pkt->hdr); + is_mcast = hfi1_is_16B_mcast(dlid); + opcode = ib_bth_get_opcode(ohdr); hdr_type = HFI1_PKT_TYPE_16B; + fecn = hfi1_16B_get_fecn(pkt->hdr); + becn = hfi1_16B_get_becn(pkt->hdr); } else { - is_mcast = (dlid > be16_to_cpu(IB_MULTICAST_LID_BASE)) && - (dlid != be16_to_cpu(IB_LID_PERMISSIVE)); pkey = ib_bth_get_pkey(ohdr); sc = hfi1_9B_get_sc5(pkt->hdr, pkt->rhf); - dlid = ib_get_dlid(pkt->hdr); + dlid = qp->ibqp.qp_type != IB_QPT_UD ? ib_get_dlid(pkt->hdr) : + ppd->lid; slid = ib_get_slid(pkt->hdr); + is_mcast = (dlid > be16_to_cpu(IB_MULTICAST_LID_BASE)) && + (dlid != be16_to_cpu(IB_LID_PERMISSIVE)); + opcode = ib_bth_get_opcode(ohdr); hdr_type = HFI1_PKT_TYPE_9B; + fecn = ib_bth_get_fecn(ohdr); + becn = ib_bth_get_becn(ohdr); }

switch (qp->ibqp.qp_type) { case IB_QPT_UD: - dlid = ppd->lid; rlid = slid; rqpn = ib_get_sqpn(pkt->ohdr); svc_type = IB_CC_SVCTYPE_UD; @@ -485,22 +505,31 @@ void hfi1_process_ecn_slowpath(struct rvt_qp *qp, struct hfi1_packet *pkt, svc_type = IB_CC_SVCTYPE_RC; break; default: - return; + return false; }

- bth1 = be32_to_cpu(ohdr->bth[1]); + ignore_fecn = is_mcast || (opcode == IB_OPCODE_CNP) || + (opcode == IB_OPCODE_RC_ACKNOWLEDGE); + /* + * ACKNOWLEDGE packets do not get a CNP but this will be + * guarded by ignore_fecn above. + */ + do_cnp = prescan || + (opcode >= IB_OPCODE_RC_RDMA_READ_RESPONSE_FIRST && + opcode <= IB_OPCODE_RC_ATOMIC_ACKNOWLEDGE); + /* Call appropriate CNP handler */ - if (do_cnp && (bth1 & IB_FECN_SMASK)) + if (!ignore_fecn && do_cnp && fecn) hfi1_handle_cnp_tbl[hdr_type](ibp, qp, rqpn, pkey, dlid, rlid, sc, grh);

- if (!is_mcast && (bth1 & IB_BECN_SMASK)) { - u32 lqpn = bth1 & RVT_QPN_MASK; + if (becn) { + u32 lqpn = be32_to_cpu(ohdr->bth[1]) & RVT_QPN_MASK; u8 sl = ibp->sc_to_sl[sc];

process_becn(ppd, sl, rlid, lqpn, rqpn, svc_type); } - + return !ignore_fecn && fecn; }

struct ps_mdata { @@ -599,7 +628,6 @@ static void __prescan_rxq(struct hfi1_packet *packet) struct rvt_dev_info *rdi = &rcd->dd->verbs_dev.rdi; u64 rhf = rhf_to_cpu(rhf_addr); u32 etype = rhf_rcv_type(rhf), qpn, bth1; - int is_ecn = 0; u8 lnh;

if (ps_done(&mdata, rhf, rcd)) @@ -625,12 +653,10 @@ static void __prescan_rxq(struct hfi1_packet *packet) goto next; /* just in case */ }

- bth1 = be32_to_cpu(packet->ohdr->bth[1]); - is_ecn = !!(bth1 & (IB_FECN_SMASK | IB_BECN_SMASK)); - - if (!is_ecn) + if (!hfi1_may_ecn(packet)) goto next;

+ bth1 = be32_to_cpu(packet->ohdr->bth[1]); qpn = bth1 & RVT_QPN_MASK; rcu_read_lock(); qp = rvt_lookup_qpn(rdi, &ibp->rvp, qpn); @@ -640,7 +666,7 @@ static void __prescan_rxq(struct hfi1_packet *packet) goto next; }

- process_ecn(qp, packet, true); + hfi1_process_ecn_slowpath(qp, packet, true); rcu_read_unlock();

/* turn off BECN, FECN */ diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h index 2ea42c0..232fc4b 100644 --- a/drivers/infiniband/hw/hfi1/hfi.h +++ b/drivers/infiniband/hw/hfi1/hfi.h @@ -1797,13 +1797,20 @@ static inline struct hfi1_ibport *rcd_to_iport(struct hfi1_ctxtdata *rcd) return &rcd->ppd->ibport_data; }

-void hfi1_process_ecn_slowpath(struct rvt_qp *qp, struct hfi1_packet *pkt, - bool do_cnp); -static inline bool process_ecn(struct rvt_qp *qp, struct hfi1_packet *pkt, - bool do_cnp) +/** + * hfi1_may_ecn - Check whether FECN or BECN processing should be done + * @pkt: the packet to be evaluated + * + * Check whether the FECN or BECN bits in the packet's header are + * enabled, depending on packet type. + * + * This function only checks for FECN and BECN bits. Additional checks + * are done in the slowpath (hfi1_process_ecn_slowpath()) in order to + * ensure correct handling. + */ +static inline bool hfi1_may_ecn(struct hfi1_packet *pkt) { - bool becn; - bool fecn; + bool fecn, becn;

if (pkt->etype == RHF_RCV_TYPE_BYPASS) { fecn = hfi1_16B_get_fecn(pkt->hdr); @@ -1812,10 +1819,18 @@ static inline bool process_ecn(struct rvt_qp *qp, struct hfi1_packet *pkt, fecn = ib_bth_get_fecn(pkt->ohdr); becn = ib_bth_get_becn(pkt->ohdr); } - if (unlikely(fecn || becn)) { - hfi1_process_ecn_slowpath(qp, pkt, do_cnp); - return fecn; - } + return fecn || becn; +} + +bool hfi1_process_ecn_slowpath(struct rvt_qp *qp, struct hfi1_packet *pkt, + bool prescan); +static inline bool process_ecn(struct rvt_qp *qp, struct hfi1_packet *pkt) +{ + bool do_work; + + do_work = hfi1_may_ecn(pkt); + if (unlikely(do_work)) + return hfi1_process_ecn_slowpath(qp, pkt, false); return false; }

diff --git a/drivers/infiniband/hw/hfi1/rc.c b/drivers/infiniband/hw/hfi1/rc.c index 770c78c..980168a 100644 --- a/drivers/infiniband/hw/hfi1/rc.c +++ b/drivers/infiniband/hw/hfi1/rc.c @@ -2049,8 +2049,7 @@ void hfi1_rc_rcv(struct hfi1_packet *packet) struct ib_reth *reth; unsigned long flags; int ret; - bool is_fecn = false; - bool copy_last = false; + bool copy_last = false, fecn; u32 rkey; u8 extra_bytes = pad + packet->extra_byte + (SIZE_OF_CRC << 2);

@@ -2059,7 +2058,7 @@ void hfi1_rc_rcv(struct hfi1_packet *packet) if (hfi1_ruc_check_hdr(ibp, packet)) return;

- is_fecn = process_ecn(qp, packet, false); + fecn = process_ecn(qp, packet);

/* * Process responses (ACKs) before anything else. Note that the @@ -2070,8 +2069,6 @@ void hfi1_rc_rcv(struct hfi1_packet *packet) if (opcode >= OP(RDMA_READ_RESPONSE_FIRST) && opcode <= OP(ATOMIC_ACKNOWLEDGE)) { rc_rcv_resp(packet); - if (is_fecn) - goto send_ack; return; }

@@ -2347,11 +2344,11 @@ void hfi1_rc_rcv(struct hfi1_packet *packet)

/* Schedule the send engine. */ qp->s_flags |= RVT_S_RESP_PENDING; + if (fecn) + qp->s_flags |= RVT_S_ECN; hfi1_schedule_send(qp);

spin_unlock_irqrestore(&qp->s_lock, flags); - if (is_fecn) - goto send_ack; return; }

@@ -2413,11 +2410,11 @@ void hfi1_rc_rcv(struct hfi1_packet *packet)

/* Schedule the send engine. */ qp->s_flags |= RVT_S_RESP_PENDING; + if (fecn) + qp->s_flags |= RVT_S_ECN; hfi1_schedule_send(qp);

spin_unlock_irqrestore(&qp->s_lock, flags); - if (is_fecn) - goto send_ack; return; }

@@ -2430,16 +2427,9 @@ void hfi1_rc_rcv(struct hfi1_packet *packet) qp->r_ack_psn = psn; qp->r_nak_state = 0; /* Send an ACK if requested or required. */ - if (psn & IB_BTH_REQ_ACK) { - if (packet->numpkt == 0) { - rc_cancel_ack(qp); - goto send_ack; - } - if (qp->r_adefered >= HFI1_PSN_CREDIT) { - rc_cancel_ack(qp); - goto send_ack; - } - if (unlikely(is_fecn)) { + if (psn & IB_BTH_REQ_ACK || fecn) { + if (packet->numpkt == 0 || fecn || + qp->r_adefered >= HFI1_PSN_CREDIT) { rc_cancel_ack(qp); goto send_ack; } @@ -2480,7 +2470,7 @@ void hfi1_rc_rcv(struct hfi1_packet *packet) qp->r_nak_state = IB_NAK_REMOTE_ACCESS_ERROR; qp->r_ack_psn = qp->r_psn; send_ack: - hfi1_send_rc_ack(packet, is_fecn); + hfi1_send_rc_ack(packet, fecn); }

void hfi1_rc_hdrerr( diff --git a/drivers/infiniband/hw/hfi1/uc.c b/drivers/infiniband/hw/hfi1/uc.c index e254dce..4121d1a 100644 --- a/drivers/infiniband/hw/hfi1/uc.c +++ b/drivers/infiniband/hw/hfi1/uc.c @@ -321,7 +321,7 @@ void hfi1_uc_rcv(struct hfi1_packet *packet) if (hfi1_ruc_check_hdr(ibp, packet)) return;

- process_ecn(qp, packet, true); + process_ecn(qp, packet);

psn = ib_bth_get_psn(ohdr); /* Compare the PSN verses the expected PSN. */ diff --git a/drivers/infiniband/hw/hfi1/ud.c b/drivers/infiniband/hw/hfi1/ud.c index 54eb695..ef5b3ff 100644 --- a/drivers/infiniband/hw/hfi1/ud.c +++ b/drivers/infiniband/hw/hfi1/ud.c @@ -51,6 +51,7 @@ #include "hfi.h" #include "mad.h" #include "verbs_txreq.h" +#include "trace_ibhdrs.h" #include "qp.h"

/* We support only two types - 9B and 16B for now */ @@ -656,18 +657,19 @@ void return_cnp_16B(struct hfi1_ibport *ibp, struct rvt_qp *qp, u32 bth0, plen, vl, hwords = 7; u16 len; u8 l4; - struct hfi1_16b_header hdr; + struct hfi1_opa_header hdr; struct ib_other_headers *ohdr; struct pio_buf *pbuf; struct send_context *ctxt = qp_to_send_context(qp, sc5); struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); u32 nwords;

+ hdr.hdr_type = HFI1_PKT_TYPE_16B; /* Populate length */ nwords = ((hfi1_get_16b_padding(hwords << 2, 0) + SIZE_OF_LT) >> 2) + SIZE_OF_CRC; if (old_grh) { - struct ib_grh *grh = &hdr.u.l.grh; + struct ib_grh *grh = &hdr.opah.u.l.grh;

grh->version_tclass_flow = old_grh->version_tclass_flow; grh->paylen = cpu_to_be16( @@ -675,11 +677,11 @@ void return_cnp_16B(struct hfi1_ibport *ibp, struct rvt_qp *qp, grh->hop_limit = 0xff; grh->sgid = old_grh->dgid; grh->dgid = old_grh->sgid; - ohdr = &hdr.u.l.oth; + ohdr = &hdr.opah.u.l.oth; l4 = OPA_16B_L4_IB_GLOBAL; hwords += sizeof(struct ib_grh) / sizeof(u32); } else { - ohdr = &hdr.u.oth; + ohdr = &hdr.opah.u.oth; l4 = OPA_16B_L4_IB_LOCAL; }

@@ -693,7 +695,7 @@ void return_cnp_16B(struct hfi1_ibport *ibp, struct rvt_qp *qp,

/* Convert dwords to flits */ len = (hwords + nwords) >> 1; - hfi1_make_16b_hdr(&hdr, slid, dlid, len, pkey, 1, 0, l4, sc5); + hfi1_make_16b_hdr(&hdr.opah, slid, dlid, len, pkey, 1, 0, l4, sc5);

plen = 2 /* PBC */ + hwords + nwords; pbc_flags |= PBC_PACKET_BYPASS | PBC_INSERT_BYPASS_ICRC; @@ -701,9 +703,11 @@ void return_cnp_16B(struct hfi1_ibport *ibp, struct rvt_qp *qp, pbc = create_pbc(ppd, pbc_flags, qp->srate_mbps, vl, plen); if (ctxt) { pbuf = sc_buffer_alloc(ctxt, plen, NULL, NULL); - if (pbuf) + if (pbuf) { + trace_pio_output_ibhdr(ppd->dd, &hdr, sc5); ppd->dd->pio_inline_send(ppd->dd, pbuf, pbc, &hdr, hwords); + } } }

@@ -715,14 +719,15 @@ void return_cnp(struct hfi1_ibport *ibp, struct rvt_qp *qp, u32 remote_qpn, u32 bth0, plen, vl, hwords = 5; u16 lrh0; u8 sl = ibp->sc_to_sl[sc5]; - struct ib_header hdr; + struct hfi1_opa_header hdr; struct ib_other_headers *ohdr; struct pio_buf *pbuf; struct send_context *ctxt = qp_to_send_context(qp, sc5); struct hfi1_pportdata *ppd = ppd_from_ibp(ibp);

+ hdr.hdr_type = HFI1_PKT_TYPE_9B; if (old_grh) { - struct ib_grh *grh = &hdr.u.l.grh; + struct ib_grh *grh = &hdr.ibh.u.l.grh;

grh->version_tclass_flow = old_grh->version_tclass_flow; grh->paylen = cpu_to_be16( @@ -730,11 +735,11 @@ void return_cnp(struct hfi1_ibport *ibp, struct rvt_qp *qp, u32 remote_qpn, grh->hop_limit = 0xff; grh->sgid = old_grh->dgid; grh->dgid = old_grh->sgid; - ohdr = &hdr.u.l.oth; + ohdr = &hdr.ibh.u.l.oth; lrh0 = HFI1_LRH_GRH; hwords += sizeof(struct ib_grh) / sizeof(u32); } else { - ohdr = &hdr.u.oth; + ohdr = &hdr.ibh.u.oth; lrh0 = HFI1_LRH_BTH; }

@@ -746,16 +751,18 @@ void return_cnp(struct hfi1_ibport *ibp, struct rvt_qp *qp, u32 remote_qpn, ohdr->bth[1] = cpu_to_be32(remote_qpn | (1 << IB_BECN_SHIFT)); ohdr->bth[2] = 0; /* PSN 0 */

- hfi1_make_ib_hdr(&hdr, lrh0, hwords + SIZE_OF_CRC, dlid, slid); + hfi1_make_ib_hdr(&hdr.ibh, lrh0, hwords + SIZE_OF_CRC, dlid, slid); plen = 2 /* PBC */ + hwords; pbc_flags |= (ib_is_sc5(sc5) << PBC_DC_INFO_SHIFT); vl = sc_to_vlt(ppd->dd, sc5); pbc = create_pbc(ppd, pbc_flags, qp->srate_mbps, vl, plen); if (ctxt) { pbuf = sc_buffer_alloc(ctxt, plen, NULL, NULL); - if (pbuf) + if (pbuf) { + trace_pio_output_ibhdr(ppd->dd, &hdr, sc5); ppd->dd->pio_inline_send(ppd->dd, pbuf, pbc, &hdr, hwords); + } } }

@@ -912,7 +919,7 @@ void hfi1_ud_rcv(struct hfi1_packet *packet) src_qp = hfi1_16B_get_src_qpn(packet->mgmt); }

- process_ecn(qp, packet, (opcode != IB_OPCODE_CNP)); + process_ecn(qp, packet); /* * Get the number of bytes the message was padded by * and drop incomplete packets.

From: Yuval Shaia yuval.shaia@oracle.com

[ Upstream commit 6db21d8986e14e2e86573a3b055b05296188bd2c ]

Array iterator stays at the same slot, fix it.

Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yuval Shaia yuval.shaia@oracle.com Reviewed-by: Bart Van Assche bvanassche@acm.org Reviewed-by: Zhu Yanjun yanjun.zhu@oracle.com Reviewed-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/infiniband/sw/rxe/rxe_pool.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/infiniband/sw/rxe/rxe_pool.c b/drivers/infiniband/sw/rxe/rxe_pool.c index b4a8acc..0e2425f 100644 --- a/drivers/infiniband/sw/rxe/rxe_pool.c +++ b/drivers/infiniband/sw/rxe/rxe_pool.c @@ -112,6 +112,18 @@ static inline struct kmem_cache *pool_cache(struct rxe_pool *pool) return rxe_type_info[pool->type].cache; }

+static void rxe_cache_clean(size_t cnt) +{ + int i; + struct rxe_type_info *type; + + for (i = 0; i < cnt; i++) { + type = &rxe_type_info[i]; + kmem_cache_destroy(type->cache); + type->cache = NULL; + } +} + int rxe_cache_init(void) { int err; @@ -136,24 +148,14 @@ int rxe_cache_init(void) return 0;

err1: - while (--i >= 0) { - kmem_cache_destroy(type->cache); - type->cache = NULL; - } + rxe_cache_clean(i);

return err; }

void rxe_cache_exit(void) { - int i; - struct rxe_type_info *type; - - for (i = 0; i < RXE_NUM_TYPES; i++) { - type = &rxe_type_info[i]; - kmem_cache_destroy(type->cache); - type->cache = NULL; - } + rxe_cache_clean(RXE_NUM_TYPES); }

static int rxe_pool_init_index(struct rxe_pool *pool, u32 max, u32 min)

From: Stefan Wahren stefan.wahren@i2se.com

[ Upstream commit 7566f39dfdc11f8a97d5810c6e6295a88f97ef91 ]

Abort the probing of the camera driver in case there isn't a camera actually connected to the Raspberry Pi. This solution also avoids a NULL ptr dereference of mmal instance on driver unload.

Fixes: 7b3ad5abf027 ("staging: Import the BCM2835 MMAL-based V4L2 camera driver.") Signed-off-by: Stefan Wahren stefan.wahren@i2se.com Reviewed-by: Nicolas Saenz Julienne nsaenzjulienne@suse.de Reviewed-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 9 +++++++++ 1 file changed, 9 insertions(+)

diff --git a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c index 4550828..068e5b9 100644 --- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c @@ -1854,6 +1854,12 @@ static int bcm2835_mmal_probe(struct platform_device *pdev) num_cameras = get_num_cameras(instance, resolutions, MAX_BCM2835_CAMERAS); + + if (num_cameras < 1) { + ret = -ENODEV; + goto cleanup_mmal; + } + if (num_cameras > MAX_BCM2835_CAMERAS) num_cameras = MAX_BCM2835_CAMERAS;

@@ -1953,6 +1959,9 @@ static int bcm2835_mmal_probe(struct platform_device *pdev) pr_info("%s: error %d while loading driver\n", BM2835_MMAL_MODULE_NAME, ret);

+cleanup_mmal: + vchiq_mmal_finalise(instance); + return ret; }

From: Kelvin Cao kelvin.cao@microchip.com

[ Upstream commit 526180408b815aa7b96fd48bd23cdd33ef04e38e ]

After submitting a Firmware Download MRPC command, Switchtec firmware will delay Management EP BAR MemRd TLP responses by more than 10ms. This is a firmware limitation. Delayed MemRd completions are a problem for systems with a low Completion Timeout (CTO).

The current driver checks the MRPC status immediately after submitting an MRPC command, which results in a delayed MemRd completion that may cause a Completion Timeout.

Remove the immediate status check and rely on the check after receiving an interrupt or timing out.

This is only a software workaround to the READ issue and a proper fix of this should be done in firmware.

Fixes: 080b47def5e5 ("MicroSemi Switchtec management interface driver") Signed-off-by: Kelvin Cao kelvin.cao@microchip.com Signed-off-by: Wesley Sheng wesley.sheng@microchip.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Logan Gunthorpe logang@deltatee.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/pci/switch/switchtec.c | 4 ---- 1 file changed, 4 deletions(-)

diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c index 5aaa4ce..ceb7ab3 100644 --- a/drivers/pci/switch/switchtec.c +++ b/drivers/pci/switch/switchtec.c @@ -134,10 +134,6 @@ static void mrpc_cmd_submit(struct switchtec_dev *stdev) stuser->data, stuser->data_len); iowrite32(stuser->cmd, &stdev->mmio_mrpc->cmd);

- stuser->status = ioread32(&stdev->mmio_mrpc->status); - if (stuser->status != SWITCHTEC_MRPC_STATUS_INPROGRESS) - mrpc_complete_cmd(stdev); - schedule_delayed_work(&stdev->mrpc_timeout, msecs_to_jiffies(500)); }

From: Geert Uytterhoeven geert+renesas@glider.be

[ Upstream commit 96bb2a6ab4eca10e5b6490b3f0738e9f7ec22c2b ]

The lcd0_data24_1_pins[] array contains the LCD0 D1[2-5] pin numbers, but the lcd0_data24_1_mux[] array lacks the corresponding pin marks.

Fixes: 06c7dd866da70f6c ("sh-pfc: r8a7740: Add LCDC0 and LCDC1 pin groups and functions") Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Reviewed-by: Simon Horman horms+renesas@verge.net.au Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/pinctrl/sh-pfc/pfc-r8a7740.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c index d807706..e9739db 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c @@ -2154,6 +2154,7 @@ enum { LCD0_D0_MARK, LCD0_D1_MARK, LCD0_D2_MARK, LCD0_D3_MARK, LCD0_D4_MARK, LCD0_D5_MARK, LCD0_D6_MARK, LCD0_D7_MARK, LCD0_D8_MARK, LCD0_D9_MARK, LCD0_D10_MARK, LCD0_D11_MARK, + LCD0_D12_MARK, LCD0_D13_MARK, LCD0_D14_MARK, LCD0_D15_MARK, LCD0_D16_MARK, LCD0_D17_MARK, LCD0_D18_PORT163_MARK, LCD0_D19_PORT162_MARK, LCD0_D20_PORT161_MARK, LCD0_D21_PORT158_MARK, LCD0_D22_PORT160_MARK, LCD0_D23_PORT159_MARK,

From: Geert Uytterhoeven geert+renesas@glider.be

[ Upstream commit 0d6256cb880166a4111bebce35790019e56b6e1b ]

The vin1_b_data18_mux[] arrays contains pin marks for the 2 LSB bits of the color components. The vin1_b_data18_pins[] array rightfully does not include the corresponding pin numbers, as RGB18 is subset of RGB24, containing only the 6 MSB bits of each component.

Fixes: 8e32c9671f84acd8 ("pinctrl: sh-pfc: r8a7791: Add VIN pins") Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Reviewed-by: Simon Horman horms+renesas@verge.net.au Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/pinctrl/sh-pfc/pfc-r8a7791.c | 3 --- 1 file changed, 3 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c index f5b4255..6236ac5 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c @@ -4374,17 +4374,14 @@ enum { }; static const unsigned int vin1_b_data18_mux[] = { /* B */ - VI1_DATA0_B_MARK, VI1_DATA1_B_MARK, VI1_DATA2_B_MARK, VI1_DATA3_B_MARK, VI1_DATA4_B_MARK, VI1_DATA5_B_MARK, VI1_DATA6_B_MARK, VI1_DATA7_B_MARK, /* G */ - VI1_G0_B_MARK, VI1_G1_B_MARK, VI1_G2_B_MARK, VI1_G3_B_MARK, VI1_G4_B_MARK, VI1_G5_B_MARK, VI1_G6_B_MARK, VI1_G7_B_MARK, /* R */ - VI1_R0_B_MARK, VI1_R1_B_MARK, VI1_R2_B_MARK, VI1_R3_B_MARK, VI1_R4_B_MARK, VI1_R5_B_MARK, VI1_R6_B_MARK, VI1_R7_B_MARK,

From: Geert Uytterhoeven geert+renesas@glider.be

[ Upstream commit 6a6c195d98a1a5e70faa87f594d7564af1dd1bed ]

The Peripheral Function Select Register 9 contains 12 fields, but the variable field descriptor contains a 13th bogus field of 3 bits.

Fixes: 43c4436e2f1890a7 ("pinctrl: sh-pfc: add R8A7794 PFC support") Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Reviewed-by: Simon Horman horms+renesas@verge.net.au Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/pinctrl/sh-pfc/pfc-r8a7794.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7794.c b/drivers/pinctrl/sh-pfc/pfc-r8a7794.c index 1640024..24b9bb1 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7794.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7794.c @@ -5215,7 +5215,7 @@ enum { FN_AVB_MDC, FN_SSI_SDATA6_B, 0, 0, } }, { PINMUX_CFG_REG_VAR("IPSR9", 0xE6060044, 32, - 1, 3, 3, 3, 3, 2, 2, 3, 3, 3, 3, 3, 3) { + 1, 3, 3, 3, 3, 2, 2, 3, 3, 3, 3, 3) { /* IP9_31 [1] */ 0, 0, /* IP9_30_28 [3] */

From: Geert Uytterhoeven geert+renesas@glider.be

[ Upstream commit b0f77269f6bba385f1f4dce44e7756cf8fbc0176 ]

The Module Select Register 0 contains 20 (= 5 x 4) reserved bits, and 12 single-bit fields, but the variable field descriptor lacks a field of 4 reserved bits.

Fixes: f59125248a691dfe ("pinctrl: sh-pfc: Add R8A77980 PFC support") Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Reviewed-by: Simon Horman horms+renesas@verge.net.au Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/pinctrl/sh-pfc/pfc-r8a77980.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77980.c b/drivers/pinctrl/sh-pfc/pfc-r8a77980.c index 3f69673..81a710b 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a77980.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a77980.c @@ -2751,7 +2751,7 @@ enum { #define F_(x, y) x, #define FM(x) FN_##x, { PINMUX_CFG_REG_VAR("MOD_SEL0", 0xe6060500, 32, - 4, 4, 4, 4, + 4, 4, 4, 4, 4, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) { /* RESERVED 31, 30, 29, 28 */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,

From: Geert Uytterhoeven geert+renesas@glider.be

[ Upstream commit e28dc3f09c9d2555a9bd982f0847988591052226 ]

While the SEL_PWM[0-3] fields in the Module Select Register 0 support 4 possible configurations per PWM pin, only the first 3 are valid.

Replace the invalid and unused configurations for SEL_PWM[0-3]_3 by dummies.

Fixes: 794a6711764658a1 ("pinctrl: sh-pfc: Initial R8A77995 PFC support") Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Reviewed-by: Simon Horman horms+renesas@verge.net.au Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/pinctrl/sh-pfc/pfc-r8a77995.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77995.c b/drivers/pinctrl/sh-pfc/pfc-r8a77995.c index adade5b..337c80b 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a77995.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a77995.c @@ -391,10 +391,10 @@ #define MOD_SEL0_27 FM(SEL_MSIOF3_0) FM(SEL_MSIOF3_1) #define MOD_SEL0_26 FM(SEL_HSCIF3_0) FM(SEL_HSCIF3_1) #define MOD_SEL0_25 FM(SEL_SCIF4_0) FM(SEL_SCIF4_1) -#define MOD_SEL0_24_23 FM(SEL_PWM0_0) FM(SEL_PWM0_1) FM(SEL_PWM0_2) FM(SEL_PWM0_3) -#define MOD_SEL0_22_21 FM(SEL_PWM1_0) FM(SEL_PWM1_1) FM(SEL_PWM1_2) FM(SEL_PWM1_3) -#define MOD_SEL0_20_19 FM(SEL_PWM2_0) FM(SEL_PWM2_1) FM(SEL_PWM2_2) FM(SEL_PWM2_3) -#define MOD_SEL0_18_17 FM(SEL_PWM3_0) FM(SEL_PWM3_1) FM(SEL_PWM3_2) FM(SEL_PWM3_3) +#define MOD_SEL0_24_23 FM(SEL_PWM0_0) FM(SEL_PWM0_1) FM(SEL_PWM0_2) F_(0, 0) +#define MOD_SEL0_22_21 FM(SEL_PWM1_0) FM(SEL_PWM1_1) FM(SEL_PWM1_2) F_(0, 0) +#define MOD_SEL0_20_19 FM(SEL_PWM2_0) FM(SEL_PWM2_1) FM(SEL_PWM2_2) F_(0, 0) +#define MOD_SEL0_18_17 FM(SEL_PWM3_0) FM(SEL_PWM3_1) FM(SEL_PWM3_2) F_(0, 0) #define MOD_SEL0_15 FM(SEL_IRQ_0_0) FM(SEL_IRQ_0_1) #define MOD_SEL0_14 FM(SEL_IRQ_1_0) FM(SEL_IRQ_1_1) #define MOD_SEL0_13 FM(SEL_IRQ_2_0) FM(SEL_IRQ_2_1)

From: Geert Uytterhoeven geert+renesas@glider.be

[ Upstream commit 4d374bacd7c9665179f9752a52d5d602c45d8190 ]

The IP10[5:3] field in Peripheral Function Select Register 10 has a width of 3 bits, i.e. it allows programming one out of 8 different configurations. However, 9 values are provided instead of 8, overflowing into the subsequent field in the register, and thus breaking the configuration of the latter.

Fix this by dropping a bogus zero value.

Fixes: ac1ebc2190f575fc ("sh-pfc: Add sh7734 pinmux support") Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Reviewed-by: Simon Horman horms+renesas@verge.net.au Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/pinctrl/sh-pfc/pfc-sh7734.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7734.c b/drivers/pinctrl/sh-pfc/pfc-sh7734.c index 05ccb27..c691e5e 100644 --- a/drivers/pinctrl/sh-pfc/pfc-sh7734.c +++ b/drivers/pinctrl/sh-pfc/pfc-sh7734.c @@ -2231,7 +2231,7 @@ enum { FN_LCD_CL1_B, 0, 0, /* IP10_5_3 [3] */ FN_SSI_WS23, FN_VI1_5_B, FN_TX1_D, FN_HSCK0_C, FN_FALE_B, - FN_LCD_DON_B, 0, 0, 0, + FN_LCD_DON_B, 0, 0, /* IP10_2_0 [3] */ FN_SSI_SCK23, FN_VI1_4_B, FN_RX1_D, FN_FCLE_B, FN_LCD_DATA15_B, 0, 0, 0 }

From: Yangtao Li tiny.windzz@gmail.com

[ Upstream commit 5eb8ba90958de1285120dae5d3a5d2b1a360b3b4 ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li tiny.windzz@gmail.com Fixes: 26cae166cff9 ("ARM: highbank: remove custom .init_time hook") Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/clk/clk-highbank.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/clk-highbank.c b/drivers/clk/clk-highbank.c index 727ed8e..8e45810 100644 --- a/drivers/clk/clk-highbank.c +++ b/drivers/clk/clk-highbank.c @@ -293,6 +293,7 @@ static __init struct clk *hb_clk_init(struct device_node *node, const struct clk /* Map system registers */ srnp = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs"); hb_clk->reg = of_iomap(srnp, 0); + of_node_put(srnp); BUG_ON(!hb_clk->reg); hb_clk->reg += reg;

From: Yangtao Li tiny.windzz@gmail.com

[ Upstream commit 2274d8001fbb5e1942fbcab5ad2eb15553b09ed2 ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li tiny.windzz@gmail.com Fixes: 5b385a45e001 ("clk: ti: add support for clkctrl aliases") Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/clk/ti/clk.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c index 27e0979..0cc87c6 100644 --- a/drivers/clk/ti/clk.c +++ b/drivers/clk/ti/clk.c @@ -188,9 +188,13 @@ void __init ti_dt_clocks_register(struct ti_dt_clk oclks[]) clkdev_add(&c->lk); } else { if (num_args && !has_clkctrl_data) { - if (of_find_compatible_node(NULL, NULL, - "ti,clkctrl")) { + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, + "ti,clkctrl"); + if (np) { has_clkctrl_data = true; + of_node_put(np); } else { clkctrl_nodes_missing = true;

From: Yangtao Li tiny.windzz@gmail.com

[ Upstream commit cee82eb9532090cd1dc953e845d71f9b1445c84e ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li tiny.windzz@gmail.com Fixes: e062b571777f ("clk: exynos4: register clocks using common clock framework") Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/clk/samsung/clk-exynos4.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index 0421960..442309b 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -1226,6 +1226,7 @@ static unsigned long __init exynos4_get_xom(void) xom = readl(chipid_base + 8);

iounmap(chipid_base); + of_node_put(np); }

return xom;

From: Yangtao Li tiny.windzz@gmail.com

[ Upstream commit 1731e14fb30212dd8c1e9f8fc1af061e56498c55 ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li tiny.windzz@gmail.com Fixes: d55135689019 ("ARM: imx: add clock driver for imx6sx") Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/clk/imx/clk-imx6sx.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/imx/clk-imx6sx.c b/drivers/clk/imx/clk-imx6sx.c index d9f2890..57ab96a47 100644 --- a/drivers/clk/imx/clk-imx6sx.c +++ b/drivers/clk/imx/clk-imx6sx.c @@ -151,6 +151,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-anatop"); base = of_iomap(np, 0); WARN_ON(!base); + of_node_put(np);

clks[IMX6SX_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); clks[IMX6SX_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));

From: Yangtao Li tiny.windzz@gmail.com

[ Upstream commit 567177024e0313e4f0dcba7ba10c0732e50e655d ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li tiny.windzz@gmail.com Fixes: 1f2c5fd5f048 ("ARM: imx: add VF610 clock support") Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/clk/imx/clk-vf610.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/imx/clk-vf610.c b/drivers/clk/imx/clk-vf610.c index 6dae543..a334667 100644 --- a/drivers/clk/imx/clk-vf610.c +++ b/drivers/clk/imx/clk-vf610.c @@ -203,6 +203,7 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) np = of_find_compatible_node(NULL, NULL, "fsl,vf610-anatop"); anatop_base = of_iomap(np, 0); BUG_ON(!anatop_base); + of_node_put(np);

np = ccm_node; ccm_base = of_iomap(np, 0);

From: Yangtao Li tiny.windzz@gmail.com

[ Upstream commit e7beeab9c61591cd0e690d8733d534c3f4278ff8 ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li tiny.windzz@gmail.com Reviewed-by: Gregory CLEMENT gregory.clement@bootlin.com Fixes: 58d516ae95cb ("clk: mvebu: kirkwood: maintain clock init order") Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/clk/mvebu/kirkwood.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/mvebu/kirkwood.c b/drivers/clk/mvebu/kirkwood.c index a2a8d61..890ebf6 100644 --- a/drivers/clk/mvebu/kirkwood.c +++ b/drivers/clk/mvebu/kirkwood.c @@ -333,6 +333,8 @@ static void __init kirkwood_clk_init(struct device_node *np) if (cgnp) { mvebu_clk_gating_setup(cgnp, kirkwood_gating_desc); kirkwood_clk_muxing_setup(cgnp, kirkwood_mux_desc); + + of_node_put(cgnp); } } CLK_OF_DECLARE(kirkwood_clk, "marvell,kirkwood-core-clock",

From: Yangtao Li tiny.windzz@gmail.com

[ Upstream commit 9b4eedf627045ae5ddcff60a484200cdd554c413 ]

The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li tiny.windzz@gmail.com Reviewed-by: Gregory CLEMENT gregory.clement@bootlin.com Fixes: 337072604224 ("clk: mvebu: Expand mv98dx3236-core-clock support") Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/clk/mvebu/mv98dx3236.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/mvebu/mv98dx3236.c b/drivers/clk/mvebu/mv98dx3236.c index 6e203af..c8a0d03d 100644 --- a/drivers/clk/mvebu/mv98dx3236.c +++ b/drivers/clk/mvebu/mv98dx3236.c @@ -174,7 +174,9 @@ static void __init mv98dx3236_clk_init(struct device_node *np)

mvebu_coreclk_setup(np, &mv98dx3236_core_clocks);

- if (cgnp) + if (cgnp) { mvebu_clk_gating_setup(cgnp, mv98dx3236_gating_desc); + of_node_put(cgnp); + } } CLK_OF_DECLARE(mv98dx3236_clk, "marvell,mv98dx3236-core-clock", mv98dx3236_clk_init);

From: Jonas Gorski jonas.gorski@gmail.com

[ Upstream commit 682fee802843b332f9c51ffc8e062de5ff773f2e ]

Trying to register the DSP platform device results in a null pointer access:

[ 0.124184] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 804e305c, ra == 804e6f20 [ 0.135208] Oops[#1]: [ 0.137514] CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.87 ... [ 0.197117] epc : 804e305c bcm63xx_dsp_register+0x80/0xa4 [ 0.202838] ra : 804e6f20 board_register_devices+0x258/0x390 ...

This happens because it tries to copy the passed platform data over the platform_device's unpopulated platform_data.

Since this code has been broken since its submission, no driver was ever submitted for it, and apparently nobody was using it, just remove it instead of trying to fix it.

Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.") Signed-off-by: Jonas Gorski jonas.gorski@gmail.com Signed-off-by: Paul Burton paul.burton@mips.com Acked-by: Florian Fainelli f.fainelli@gmail.com Cc: linux-mips@linux-mips.org Cc: Ralf Baechle ralf@linux-mips.org Cc: James Hogan jhogan@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/mips/bcm63xx/Makefile | 6 +-- arch/mips/bcm63xx/boards/board_bcm963xx.c | 20 -------- arch/mips/bcm63xx/dev-dsp.c | 56 ---------------------- .../include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h | 14 ------ .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 5 -- 5 files changed, 3 insertions(+), 98 deletions(-) delete mode 100644 arch/mips/bcm63xx/dev-dsp.c delete mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h

diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile index c69f297f..d89651e 100644 --- a/arch/mips/bcm63xx/Makefile +++ b/arch/mips/bcm63xx/Makefile @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 obj-y += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \ - setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \ - dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \ - dev-wdt.o dev-usb-usbd.o + setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \ + dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \ + dev-usb-usbd.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o

obj-y += boards/ diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index b2097c0..36ec3dc 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -23,7 +23,6 @@ #include <bcm63xx_nvram.h> #include <bcm63xx_dev_pci.h> #include <bcm63xx_dev_enet.h> -#include <bcm63xx_dev_dsp.h> #include <bcm63xx_dev_flash.h> #include <bcm63xx_dev_hsspi.h> #include <bcm63xx_dev_pcmcia.h> @@ -289,14 +288,6 @@ .has_pccard = 1, .has_ehci0 = 1,

- .has_dsp = 1, - .dsp = { - .gpio_rst = 6, - .gpio_int = 34, - .cs = 2, - .ext_irq = 2, - }, - .leds = { { .name = "adsl-fail", @@ -401,14 +392,6 @@

.has_ohci0 = 1,

- .has_dsp = 1, - .dsp = { - .gpio_rst = 6, - .gpio_int = 34, - .ext_irq = 2, - .cs = 2, - }, - .leds = { { .name = "adsl-fail", @@ -898,9 +881,6 @@ int __init board_register_devices(void) if (board.has_usbd) bcm63xx_usbd_register(&board.usbd);

- if (board.has_dsp) - bcm63xx_dsp_register(&board.dsp); - /* Generate MAC address for WLAN and register our SPROM, * do this after registering enet devices */ diff --git a/arch/mips/bcm63xx/dev-dsp.c b/arch/mips/bcm63xx/dev-dsp.c deleted file mode 100644 index 5bb5b15..00000000 --- a/arch/mips/bcm63xx/dev-dsp.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Broadcom BCM63xx VoIP DSP registration - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2009 Florian Fainelli florian@openwrt.org - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <bcm63xx_cpu.h> -#include <bcm63xx_dev_dsp.h> -#include <bcm63xx_regs.h> -#include <bcm63xx_io.h> - -static struct resource voip_dsp_resources[] = { - { - .start = -1, /* filled at runtime */ - .end = -1, /* filled at runtime */ - .flags = IORESOURCE_MEM, - }, - { - .start = -1, /* filled at runtime */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bcm63xx_voip_dsp_device = { - .name = "bcm63xx-voip-dsp", - .id = -1, - .num_resources = ARRAY_SIZE(voip_dsp_resources), - .resource = voip_dsp_resources, -}; - -int __init bcm63xx_dsp_register(const struct bcm63xx_dsp_platform_data *pd) -{ - struct bcm63xx_dsp_platform_data *dpd; - u32 val; - - /* Get the memory window */ - val = bcm_mpi_readl(MPI_CSBASE_REG(pd->cs - 1)); - val &= MPI_CSBASE_BASE_MASK; - voip_dsp_resources[0].start = val; - voip_dsp_resources[0].end = val + 0xFFFFFFF; - voip_dsp_resources[1].start = pd->ext_irq; - - /* copy given platform data */ - dpd = bcm63xx_voip_dsp_device.dev.platform_data; - memcpy(dpd, pd, sizeof (*pd)); - - return platform_device_register(&bcm63xx_voip_dsp_device); -} diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h deleted file mode 100644 index 4e49707..00000000 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __BCM63XX_DSP_H -#define __BCM63XX_DSP_H - -struct bcm63xx_dsp_platform_data { - unsigned gpio_rst; - unsigned gpio_int; - unsigned cs; - unsigned ext_irq; -}; - -int __init bcm63xx_dsp_register(const struct bcm63xx_dsp_platform_data *pd); - -#endif /* __BCM63XX_DSP_H */ diff --git a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h index 5e5b1bc..830f53f 100644 --- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h +++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h @@ -7,7 +7,6 @@ #include <linux/leds.h> #include <bcm63xx_dev_enet.h> #include <bcm63xx_dev_usb_usbd.h> -#include <bcm63xx_dev_dsp.h>

/* * flash mapping @@ -31,7 +30,6 @@ struct board_info { unsigned int has_ohci0:1; unsigned int has_ehci0:1; unsigned int has_usbd:1; - unsigned int has_dsp:1; unsigned int has_uart0:1; unsigned int has_uart1:1;

@@ -43,9 +41,6 @@ struct board_info { /* USB config */ struct bcm63xx_usbd_platform_data usbd;

- /* DSP config */ - struct bcm63xx_dsp_platform_data dsp; - /* GPIO LEDs */ struct gpio_led leds[5];

From: Sibi Sankar sibis@codeaurora.org

[ Upstream commit 80ec419c3404106c563aaf56aa6b516a59c4cdfb ]

Proxy vote for QDSS clock and remove vote on handover interrupt to provide MSS PBL with access to STM hardware registers during boot. Add "snoc_axi" and "mnoc_axi" to the active clock list. Rename "gpll0_mss_clk" to "gpll0_mss" for consistency across SoCs.

Fixes: 9f058fa2efb1 ("remoteproc: qcom: Add support for mss remoteproc on msm8996") Signed-off-by: Sibi Sankar sibis@codeaurora.org Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/remoteproc/qcom_q6v5_pil.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c index 6a84b63..073747b 100644 --- a/drivers/remoteproc/qcom_q6v5_pil.c +++ b/drivers/remoteproc/qcom_q6v5_pil.c @@ -1271,13 +1271,16 @@ static int q6v5_remove(struct platform_device *pdev) .proxy_clk_names = (char*[]){ "xo", "pnoc", + "qdss", NULL }, .active_clk_names = (char*[]){ "iface", "bus", "mem", - "gpll0_mss_clk", + "gpll0_mss", + "snoc_axi", + "mnoc_axi", NULL }, .need_mem_protection = true,

From: YueHaibing yuehaibing@huawei.com

[ Upstream commit c39191feed4540fed98badeb484833dcf659bb96 ]

'ctx->handle' is unsigned, it never less than zero. This patch use int 'tmp_handle' to handle the err condition.

Fixes: 62968144e673 ("drm: convert drm context code to use Linux idr") Signed-off-by: YueHaibing yuehaibing@huawei.com Signed-off-by: Daniel Vetter daniel.vetter@ffwll.ch Link: https://patchwork.freedesktop.org/patch/msgid/20181229024907.12852-1-yuehaib... Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/gpu/drm/drm_context.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/drm_context.c b/drivers/gpu/drm/drm_context.c index f973d28..da5abf2 100644 --- a/drivers/gpu/drm/drm_context.c +++ b/drivers/gpu/drm/drm_context.c @@ -361,23 +361,26 @@ int drm_legacy_addctx(struct drm_device *dev, void *data, { struct drm_ctx_list *ctx_entry; struct drm_ctx *ctx = data; + int tmp_handle;

if (!drm_core_check_feature(dev, DRIVER_KMS_LEGACY_CONTEXT) && !drm_core_check_feature(dev, DRIVER_LEGACY)) return -EINVAL;

- ctx->handle = drm_legacy_ctxbitmap_next(dev); - if (ctx->handle == DRM_KERNEL_CONTEXT) { + tmp_handle = drm_legacy_ctxbitmap_next(dev); + if (tmp_handle == DRM_KERNEL_CONTEXT) { /* Skip kernel's context and get a new one. */ - ctx->handle = drm_legacy_ctxbitmap_next(dev); + tmp_handle = drm_legacy_ctxbitmap_next(dev); } - DRM_DEBUG("%d\n", ctx->handle); - if (ctx->handle < 0) { + DRM_DEBUG("%d\n", tmp_handle); + if (tmp_handle < 0) { DRM_DEBUG("Not enough free contexts.\n"); /* Should this return -EBUSY instead? */ - return -ENOMEM; + return tmp_handle; }

+ ctx->handle = tmp_handle; + ctx_entry = kmalloc(sizeof(*ctx_entry), GFP_KERNEL); if (!ctx_entry) { DRM_DEBUG("out of memory\n");

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit f5fd9fd4000984f19db689282054953981a50534 ]

The ->nr_signal is the supposed to be the number of elements in the ->signal array. There was one place where it was 5 but it was supposed to be 4. That looks like a copy and paste bug. There were also two checks that were off by one.

Fixes: 9e2c2e273012 ("drm/etnaviv: add infrastructure to query perf counter") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Reviewed-by: Christian Gmeiner christian.gmeiner@gmail.com Tested-by: Christian Gmeiner christian.gmeiner@gmail.com Signed-off-by: Lucas Stach l.stach@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/gpu/drm/etnaviv/etnaviv_perfmon.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_perfmon.c b/drivers/gpu/drm/etnaviv/etnaviv_perfmon.c index 9980d81..4227a40 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_perfmon.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_perfmon.c @@ -113,7 +113,7 @@ static u32 pipe_reg_read(struct etnaviv_gpu *gpu, .name = "PE", .profile_read = VIVS_MC_PROFILE_PE_READ, .profile_config = VIVS_MC_PROFILE_CONFIG0, - .nr_signals = 5, + .nr_signals = 4, .signal = (const struct etnaviv_pm_signal[]) { { "PIXEL_COUNT_KILLED_BY_COLOR_PIPE", @@ -435,7 +435,7 @@ int etnaviv_pm_query_sig(struct etnaviv_gpu *gpu,

dom = meta->domains + signal->domain;

- if (signal->iter > dom->nr_signals) + if (signal->iter >= dom->nr_signals) return -EINVAL;

sig = &dom->signal[signal->iter]; @@ -461,7 +461,7 @@ int etnaviv_pm_req_validate(const struct drm_etnaviv_gem_submit_pmr *r,

dom = meta->domains + r->domain;

- if (r->signal > dom->nr_signals) + if (r->signal >= dom->nr_signals) return -EINVAL;

return 0;

From: Gal Pressman galpress@amazon.com

[ Upstream commit b188940796c7be31c1b8c25a9a0e0842c2e7a49e ]

The pkey table size is one element, index should be tested for > 0 instead of > 1.

Fixes: fe2caefcdf58 ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter") Signed-off-by: Gal Pressman galpress@amazon.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/infiniband/hw/ocrdma/ocrdma_verbs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c index c158ca9..08271fc 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c @@ -55,7 +55,7 @@

int ocrdma_query_pkey(struct ib_device *ibdev, u8 port, u16 index, u16 *pkey) { - if (index > 1) + if (index > 0) return -EINVAL;

*pkey = 0xffff;

From: YueHaibing yuehaibing@huawei.com

[ Upstream commit 06c3bbd3c12737a50c2e981821b5585e1786e73d ]

In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR().

Fixes: 8f1597c8f1a5 ("drm: shmobile: Perform initialization/cleanup at probe/remove time") Signed-off-by: YueHaibing yuehaibing@huawei.com Reviewed-by: Simon Horman horms+renesas@verge.net.au Reviewed-by: Kieran Bingham kieran.bingham+renesas@ideasonboard.com Reviewed-by: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/gpu/drm/shmobile/shmob_drm_drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/shmobile/shmob_drm_drv.c b/drivers/gpu/drm/shmobile/shmob_drm_drv.c index 5925725..58d8a98 100644 --- a/drivers/gpu/drm/shmobile/shmob_drm_drv.c +++ b/drivers/gpu/drm/shmobile/shmob_drm_drv.c @@ -233,8 +233,8 @@ static int shmob_drm_probe(struct platform_device *pdev)

res = platform_get_resource(pdev, IORESOURCE_MEM, 0); sdev->mmio = devm_ioremap_resource(&pdev->dev, res); - if (sdev->mmio == NULL) - return -ENOMEM; + if (IS_ERR(sdev->mmio)) + return PTR_ERR(sdev->mmio);

ret = shmob_drm_setup_clocks(sdev, pdata->clk_source); if (ret < 0)

From: Charles Keepax ckeepax@opensource.cirrus.com

[ Upstream commit 734882a8bf984c2ac8a57d8ac3ee53230bd0bed8 ]

Currently the driver calls pm_runtime_put_autosuspend but without ever having done a pm_runtime_get, this causes the reference count in the pm runtime core to become -1. The bad reference count causes the core to sometimes suspend whilst an active SPI transfer is in progress.

arizona spi0.1: SPI transfer timed out spi_master spi0: failed to transfer one message from queue

The correct proceedure is to do all the initialisation that requires the hardware to be powered up before enabling the PM runtime, then enable the PM runtime having called pm_runtime_set_active to inform it that the hardware is currently powered up. The core will then power it down at it's leisure and no explicit pm_runtime_put is required.

Fixes: d36ccd9f7ea4 ("spi: cadence: Runtime pm adaptation") Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/spi/spi-cadence.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index 7c88f74..94cc0a1 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -584,11 +584,6 @@ static int cdns_spi_probe(struct platform_device *pdev) goto clk_dis_apb; }

- pm_runtime_use_autosuspend(&pdev->dev); - pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT); - pm_runtime_set_active(&pdev->dev); - pm_runtime_enable(&pdev->dev); - ret = of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs); if (ret < 0) master->num_chipselect = CDNS_SPI_DEFAULT_NUM_CS; @@ -603,8 +598,10 @@ static int cdns_spi_probe(struct platform_device *pdev) /* SPI controller initializations */ cdns_spi_init_hw(xspi);

- pm_runtime_mark_last_busy(&pdev->dev); - pm_runtime_put_autosuspend(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);

irq = platform_get_irq(pdev, 0); if (irq <= 0) {

From: Dmitry Osipenko digetx@gmail.com

[ Upstream commit be4dbdec2bab8635c7a41573668624ee13d83022 ]

This fixes irrelevant "tegra-mc 7000f000.memory-controller: no memory timings for RAM code 0 registered" warning message during of kernels boot-up on Tegra20.

Fixes: a8d502fd3348 ("memory: tegra: Squash tegra20-mc into common tegra-mc driver") Signed-off-by: Dmitry Osipenko digetx@gmail.com Acked-by: Jon Hunter jonathanh@nvidia.com Acked-by: Thierry Reding treding@nvidia.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/memory/tegra/mc.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/memory/tegra/mc.c b/drivers/memory/tegra/mc.c index c8f1666..346d8ea 100644 --- a/drivers/memory/tegra/mc.c +++ b/drivers/memory/tegra/mc.c @@ -664,12 +664,13 @@ static int tegra_mc_probe(struct platform_device *pdev) }

isr = tegra_mc_irq; - }

- err = tegra_mc_setup_timings(mc); - if (err < 0) { - dev_err(&pdev->dev, "failed to setup timings: %d\n", err); - return err; + err = tegra_mc_setup_timings(mc); + if (err < 0) { + dev_err(&pdev->dev, "failed to setup timings: %d\n", + err); + return err; + } }

mc->irq = platform_get_irq(pdev, 0);

From: Pawe? Chmiel pawel.mikolaj.chmiel@gmail.com

[ Upstream commit 19c624c6b29e244c418f8b44a711cbf5e82e3cd4 ]

This commit corrects max and step values for v4l2 control for V4L2_CID_JPEG_RESTART_INTERVAL. Max should be 0xffff and step should be 1. It was found by using v4l2-compliance tool and checking result of VIDIOC_QUERY_EXT_CTRL/QUERYMENU test. Previously it was complaining that step was bigger than difference between max and min.

Fixes: 15f4bc3b1f42 ("[media] s5p-jpeg: Add JPEG controls support")

Signed-off-by: Pawe? Chmiel pawel.mikolaj.chmiel@gmail.com Reviewed-by: Jacek Anaszewski jacek.anaszewski@gmail.com Reviewed-by: Sylwester Nawrocki s.nawrocki@samsung.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/media/platform/s5p-jpeg/jpeg-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c index 350afaa..fa7c42c 100644 --- a/drivers/media/platform/s5p-jpeg/jpeg-core.c +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c @@ -2005,7 +2005,7 @@ static int s5p_jpeg_controls_create(struct s5p_jpeg_ctx *ctx)

v4l2_ctrl_new_std(&ctx->ctrl_handler, &s5p_jpeg_ctrl_ops, V4L2_CID_JPEG_RESTART_INTERVAL, - 0, 3, 0xffff, 0); + 0, 0xffff, 1, 0); if (ctx->jpeg->variant->version == SJPEG_S5P) mask = ~0x06; /* 422, 420 */ }

From: YueHaibing yuehaibing@huawei.com

[ Upstream commit 707d0cf8f7cff6dfee9197002859912310532c4f ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/crypto/bcm/cipher.c: In function 'handle_ahash_req': drivers/crypto/bcm/cipher.c:720:15: warning: variable 'chunk_start' set but not used [-Wunused-but-set-variable]

drivers/crypto/bcm/cipher.c: In function 'spu_rx_callback': drivers/crypto/bcm/cipher.c:1679:31: warning: variable 'areq' set but not used [-Wunused-but-set-variable]

drivers/crypto/bcm/cipher.c:1678:22: warning: variable 'ctx' set but not used [-Wunused-but-set-variable]

Fixes: 9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver") Signed-off-by: YueHaibing yuehaibing@huawei.com Reviewed-by: Raveendra Padasalagi raveendra.padasalagi@broadcom.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/crypto/bcm/cipher.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/crypto/bcm/cipher.c b/drivers/crypto/bcm/cipher.c index 49c0097..0b1fc56 100644 --- a/drivers/crypto/bcm/cipher.c +++ b/drivers/crypto/bcm/cipher.c @@ -717,7 +717,7 @@ static int handle_ahash_req(struct iproc_reqctx_s *rctx) */ unsigned int new_data_len;

- unsigned int chunk_start = 0; + unsigned int __maybe_unused chunk_start = 0; u32 db_size; /* Length of data field, incl gcm and hash padding */ int pad_len = 0; /* total pad len, including gcm, hash, stat padding */ u32 data_pad_len = 0; /* length of GCM/CCM padding */ @@ -1675,8 +1675,6 @@ static void spu_rx_callback(struct mbox_client *cl, void *msg) struct spu_hw *spu = &iproc_priv.spu; struct brcm_message *mssg = msg; struct iproc_reqctx_s *rctx; - struct iproc_ctx_s *ctx; - struct crypto_async_request *areq; int err = 0;

rctx = mssg->ctx; @@ -1686,8 +1684,6 @@ static void spu_rx_callback(struct mbox_client *cl, void *msg) err = -EFAULT; goto cb_finish; } - areq = rctx->parent; - ctx = rctx->ctx;

/* process the SPU status */ err = spu->spu_status_process(rctx->msg_buf.rx_stat);

From: Jacopo Mondi jacopo+renesas@jmondi.org

[ Upstream commit 341fe1d301f587c930509f6b9153436b957f649c ]

As the tw9910 subdevice is registered through the v4l2-async framework, use the v4l2-async provided function to register it.

Fixes: 7b20f325a566 ("media: i2c: tw9910: Remove soc_camera dependencies")

Signed-off-by: Jacopo Mondi jacopo+renesas@jmondi.org Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/media/i2c/tw9910.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/tw9910.c b/drivers/media/i2c/tw9910.c index a54548cc..c7321a7 100644 --- a/drivers/media/i2c/tw9910.c +++ b/drivers/media/i2c/tw9910.c @@ -1000,7 +1000,7 @@ static int tw9910_remove(struct i2c_client *client) if (priv->pdn_gpio) gpiod_put(priv->pdn_gpio); clk_put(priv->clk); - v4l2_device_unregister_subdev(&priv->subdev); + v4l2_async_unregister_subdev(&priv->subdev);

return 0; }

From: YueHaibing yuehaibing@huawei.com

[ Upstream commit e902cdcb5112b89ee445588147964723fd69ffb4 ]

In pch_spi_handle_dma, it doesn't check for NULL returns of kcalloc so it would result in an Oops.

Fixes: c37f3c2749b5 ("spi/topcliff_pch: DMA support") Signed-off-by: YueHaibing yuehaibing@huawei.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/spi/spi-topcliff-pch.c | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c index 4389ab8..fa730a8 100644 --- a/drivers/spi/spi-topcliff-pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -1008,6 +1008,9 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)

/* RX */ dma->sg_rx_p = kcalloc(num, sizeof(*dma->sg_rx_p), GFP_ATOMIC); + if (!dma->sg_rx_p) + return; + sg_init_table(dma->sg_rx_p, num); /* Initialize SG table */ /* offset, length setting */ sg = dma->sg_rx_p; @@ -1068,6 +1071,9 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw) }

dma->sg_tx_p = kcalloc(num, sizeof(*dma->sg_tx_p), GFP_ATOMIC); + if (!dma->sg_tx_p) + return; + sg_init_table(dma->sg_tx_p, num); /* Initialize SG table */ /* offset, length setting */ sg = dma->sg_tx_p;

From: Chen-Yu Tsai wens@csie.org

[ Upstream commit 108a459ef4cd17a28711d81092044e597b5c7618 ]

The PLL-MIPI clock is somewhat special as it has its own LDOs which need to be turned on for this PLL to actually work and output a clock signal.

Add the 2 LDO enable bits to the gate bits.

Fixes: 5690879d93e8 ("clk: sunxi-ng: Add A23 CCU") Signed-off-by: Chen-Yu Tsai wens@csie.org Signed-off-by: Maxime Ripard maxime.ripard@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/clk/sunxi-ng/ccu-sun8i-a23.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a23.c b/drivers/clk/sunxi-ng/ccu-sun8i-a23.c index a4fa294..4b5f8f4 100644 --- a/drivers/clk/sunxi-ng/ccu-sun8i-a23.c +++ b/drivers/clk/sunxi-ng/ccu-sun8i-a23.c @@ -144,7 +144,7 @@ static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_mipi_clk, "pll-mipi", 8, 4, /* N */ 4, 2, /* K */ 0, 4, /* M */ - BIT(31), /* gate */ + BIT(31) | BIT(23) | BIT(22), /* gate */ BIT(28), /* lock */ CLK_SET_RATE_UNGATE);

From: Moni Shoua monis@mellanox.com

[ Upstream commit 33814e5d127e21f53b52e17b0722c1b57d4f4d29 ]

The lock in qp_table might be taken from process context or from interrupt context. This may lead to a deadlock unless it is taken with IRQs disabled.

Discovered by lockdep

================================ WARNING: inconsistent lock state 4.20.0-rc6 -------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W}

python/12572 [HC1[1]:SC0[0]:HE0:SE1] takes: 00000000052a4df4 (&(&table->lock)->rlock#2){?.+.}, /0x50 [mlx5_core] {HARDIRQ-ON-W} state was registered at: _raw_spin_lock+0x33/0x70 mlx5_get_rsc+0x1a/0x50 [mlx5_core] mlx5_ib_eqe_pf_action+0x493/0x1be0 [mlx5_ib] process_one_work+0x90c/0x1820 worker_thread+0x87/0xbb0 kthread+0x320/0x3e0 ret_from_fork+0x24/0x30 irq event stamp: 103928 hardirqs last enabled at (103927): [] nk+0x1a/0x1c hardirqs last disabled at (103928): [] unk+0x1a/0x1c softirqs last enabled at (103924): [] tcp_sendmsg+0x31/0x40 softirqs last disabled at (103922): [] 80

other info that might help us debug this: Possible unsafe locking scenario:

CPU0 ---- lock(&(&table->lock)->rlock#2);

lock(&(&table->lock)->rlock#2);

*** DEADLOCK ***

Fixes: 032080ab43ac ("IB/mlx5: Lock QP during page fault handling") Signed-off-by: Moni Shoua monis@mellanox.com Reviewed-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Saeed Mahameed saeedm@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/ethernet/mellanox/mlx5/core/qp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/qp.c b/drivers/net/ethernet/mellanox/mlx5/core/qp.c index f33707c..479ac21 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/qp.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/qp.c @@ -44,14 +44,15 @@ static struct mlx5_core_rsc_common *mlx5_get_rsc(struct mlx5_core_dev *dev, { struct mlx5_qp_table *table = &dev->priv.qp_table; struct mlx5_core_rsc_common *common; + unsigned long flags;

- spin_lock(&table->lock); + spin_lock_irqsave(&table->lock, flags);

common = radix_tree_lookup(&table->tree, rsn); if (common) atomic_inc(&common->refcount);

- spin_unlock(&table->lock); + spin_unlock_irqrestore(&table->lock, flags);

if (!common) { mlx5_core_warn(dev, "Async event for bogus resource 0x%x\n",

From: Chen-Yu Tsai wens@csie.org

[ Upstream commit 52d9bcb3d0de3fa1e07aff3800f857836d30410d ]

The GIC device node was placed out of order in the initial device tree submission. Move it so the nodes are correctly sorted by base address again.

Fixes: e54be32d0273 ("arm64: allwinner: h6: add the basical Allwinner H6 DTSI file") Signed-off-by: Chen-Yu Tsai wens@csie.org Signed-off-by: Maxime Ripard maxime.ripard@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index cfa5fff..72813e7 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -101,17 +101,6 @@ #reset-cells = <1>; };

- gic: interrupt-controller@3021000 { - compatible = "arm,gic-400"; - reg = <0x03021000 0x1000>, - <0x03022000 0x2000>, - <0x03024000 0x2000>, - <0x03026000 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - interrupt-controller; - #interrupt-cells = <3>; - }; - pio: pinctrl@300b000 { compatible = "allwinner,sun50i-h6-pinctrl"; reg = <0x0300b000 0x400>; @@ -149,6 +138,17 @@ }; };

+ gic: interrupt-controller@3021000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, + <0x03022000 0x2000>, + <0x03024000 0x2000>, + <0x03026000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + mmc0: mmc@4020000 { compatible = "allwinner,sun50i-h6-mmc", "allwinner,sun50i-a64-mmc";

From: Tony Lindgren tony@atomide.com

[ Upstream commit 9bd34c63f5536c490c152833c77fa47f59aeade3 ]

Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") started producing a warning for pwm-omap-dmtimer:

WARNING: CPU: 0 PID: 77 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x2f8/0x388 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2 (Idle): Data Access in Supervisor mode during Functional access ... __pm_runtime_idle omap_dm_timer_disable pwm_omap_dmtimer_start pwm_omap_dmtimer_enable pwm_apply_state pwm_vibrator_start pwm_vibrator_play_work

This is because the timer that pwm-omap-dmtimer is using is now being probed with ti-sysc interconnect target module instead of omap_device and the ti-sysc quirk for SYSC_QUIRK_LEGACY_IDLE is not fully compatible with what omap_device has been doing.

We could fix this by reverting the timer changes and have the timer probe again with omap_device. Or we could add more quirk handling to ti-sysc driver. But as these options don't work nicely as longer term solutions, let's just make timers probe with ti-sysc without any quirks.

To do this, all we need to do is remove quirks for timers for ti-sysc, and drop the bogus pm_runtime_irq_safe() flag for timer-ti-dm.

We should not use pm_runtime_irq_safe() anyways for drivers as it will take a permanent use count on the parent device blocking the parent devices from idling and has been forcing ti-sysc driver to use a quirk flag.

Note that we will move the timer data to DEBUG section later on in clean-up patches.

Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") Cc: Andy Shevchenko andy.shevchenko@gmail.com Cc: Bartosz Golaszewski bgolaszewski@baylibre.com Cc: Daniel Lezcano daniel.lezcano@linaro.org Cc: H. Nikolaus Schaller hns@goldelico.com Cc: Keerthy j-keerthy@ti.com Cc: Ladislav Michl ladis@linux-mips.org Cc: Pavel Machek pavel@ucw.cz Cc: Sebastian Reichel sre@kernel.org Cc: Tero Kristo t-kristo@ti.com Cc: Thierry Reding thierry.reding@gmail.com Cc: Thomas Gleixner tglx@linutronix.de Reported-by: H. Nikolaus Schaller hns@goldelico.com Tested-By: Andreas Kemnade andreas@kemnade.info Tested-By: H. Nikolaus Schaller hns@goldelico.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/bus/ti-sysc.c | 4 ++-- drivers/clocksource/timer-ti-dm.c | 1 - 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 926c833..2813f9e 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -888,10 +888,10 @@ struct sysc_revision_quirk { SYSC_QUIRK("smartreflex", 0, -1, 0x38, -1, 0x00000000, 0xffffffff, SYSC_QUIRK_LEGACY_IDLE), SYSC_QUIRK("timer", 0, 0, 0x10, 0x14, 0x00000015, 0xffffffff, - SYSC_QUIRK_LEGACY_IDLE), + 0), /* Some timers on omap4 and later */ SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x4fff1301, 0xffffffff, - SYSC_QUIRK_LEGACY_IDLE), + 0), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff, SYSC_QUIRK_LEGACY_IDLE), /* Uarts on omap4 and later */ diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c index 3ecf847..23414dd 100644 --- a/drivers/clocksource/timer-ti-dm.c +++ b/drivers/clocksource/timer-ti-dm.c @@ -868,7 +868,6 @@ static int omap_dm_timer_probe(struct platform_device *pdev) timer->pdev = pdev;

pm_runtime_enable(dev); - pm_runtime_irq_safe(dev);

if (!timer->reserved) { ret = pm_runtime_get_sync(dev);

From: Corentin Labbe clabbe@baylibre.com

[ Upstream commit 6e88098ca43a3d80ae86908f7badba683c8a0d84 ]

When building without CONFIG_HW_RANDOM_PPC4XX, I hit the following build failure: drivers/crypto/amcc/crypto4xx_core.c: In function 'crypto4xx_probe': drivers/crypto/amcc/crypto4xx_core.c:1407:20: error: passing argument 1 of 'ppc4xx_trng_probe' from incompatible pointer type [-Werror=incompatible-pointer-types] In file included from drivers/crypto/amcc/crypto4xx_core.c:50:0: drivers/crypto/amcc/crypto4xx_trng.h:28:20: note: expected 'struct crypto4xx_device *' but argument is of type 'struct crypto4xx_core_device *' drivers/crypto/amcc/crypto4xx_core.c: In function 'crypto4xx_remove': drivers/crypto/amcc/crypto4xx_core.c:1434:21: error: passing argument 1 of 'ppc4xx_trng_remove' from incompatible pointer type [-Werror=incompatible-pointer-types] In file included from drivers/crypto/amcc/crypto4xx_core.c:50:0: drivers/crypto/amcc/crypto4xx_trng.h:30:20: note: expected 'struct crypto4xx_device *' but argument is of type 'struct crypto4xx_core_device *'

This patch fix the needed argument of ppc4xx_trng_probe()/ppc4xx_trng_remove() in that case.

Fixes: 5343e674f32f ("crypto4xx: integrate ppc4xx-rng into crypto4xx") Signed-off-by: Corentin Labbe clabbe@baylibre.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/crypto/amcc/crypto4xx_trng.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/amcc/crypto4xx_trng.h b/drivers/crypto/amcc/crypto4xx_trng.h index 931d225..7bbda51 100644 --- a/drivers/crypto/amcc/crypto4xx_trng.h +++ b/drivers/crypto/amcc/crypto4xx_trng.h @@ -26,9 +26,9 @@ void ppc4xx_trng_remove(struct crypto4xx_core_device *core_dev); #else static inline void ppc4xx_trng_probe( - struct crypto4xx_device *dev __maybe_unused) { } + struct crypto4xx_core_device *dev __maybe_unused) { } static inline void ppc4xx_trng_remove( - struct crypto4xx_device *dev __maybe_unused) { } + struct crypto4xx_core_device *dev __maybe_unused) { } #endif

#endif

From: "Rafael J. Wysocki" rafael.j.wysocki@intel.com

[ Upstream commit f265df550a4350dce0a4d721a77c52e4b847ea40 ]

After commit ead18c23c263 ("driver core: Introduce device links reference counting"), if there is a link between the given supplier and the given consumer already, device_link_add() will refcount it and return it unconditionally. However, if the flags passed to it on the second (or any subsequent) attempt to create a device link between the same consumer-supplier pair are not compatible with the existing link's flags, that is incorrect.

First off, if the existing link is stateless and the next caller of device_link_add() for the same consumer-supplier pair wants a stateful one, or the other way around, the existing link cannot be returned, because it will not match the expected behavior, so make device_link_add() dump the stack and return NULL in that case.

Moreover, if the DL_FLAG_AUTOREMOVE_CONSUMER flag is passed to device_link_add(), its caller will expect its reference to the link to be dropped automatically on consumer driver removal, which will not happen if that flag is not set in the link's flags (and analogously for DL_FLAG_AUTOREMOVE_SUPPLIER). For this reason, make device_link_add() update the existing link's flags accordingly before returning it to the caller.

Fixes: ead18c23c263 ("driver core: Introduce device links reference counting") Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/base/core.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/base/core.c b/drivers/base/core.c index 055132f..562385c 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -221,12 +221,29 @@ struct device_link *device_link_add(struct device *consumer, goto out; }

- list_for_each_entry(link, &supplier->links.consumers, s_node) - if (link->consumer == consumer) { - kref_get(&link->kref); + list_for_each_entry(link, &supplier->links.consumers, s_node) { + if (link->consumer != consumer) + continue; + + /* + * Don't return a stateless link if the caller wants a stateful + * one and vice versa. + */ + if (WARN_ON((flags & DL_FLAG_STATELESS) != (link->flags & DL_FLAG_STATELESS))) { + link = NULL; goto out; }

+ if (flags & DL_FLAG_AUTOREMOVE_CONSUMER) + link->flags |= DL_FLAG_AUTOREMOVE_CONSUMER; + + if (flags & DL_FLAG_AUTOREMOVE_SUPPLIER) + link->flags |= DL_FLAG_AUTOREMOVE_SUPPLIER; + + kref_get(&link->kref); + goto out; + } + link = kzalloc(sizeof(*link), GFP_KERNEL); if (!link) goto out;

From: "Rafael J. Wysocki" rafael.j.wysocki@intel.com

[ Upstream commit e2f3cd831a280fc226118d9369bf3f77aab58c56 ]

After commit ead18c23c263 ("driver core: Introduce device links reference counting"), if there is a link between the given supplier and the given consumer already, device_link_add() will refcount it and return it unconditionally without updating its flags. It is possible, however, that the second (or any subsequent) caller of device_link_add() for the same consumer-supplier pair will pass DL_FLAG_PM_RUNTIME, possibly along with DL_FLAG_RPM_ACTIVE, in flags to it and the existing link may not behave as expected then.

First, if DL_FLAG_PM_RUNTIME is not set in the existing link's flags at all, it needs to be set like during the original initialization of the link.

Second, if DL_FLAG_RPM_ACTIVE is passed to device_link_add() in flags (in addition to DL_FLAG_PM_RUNTIME), the existing link should to be updated to reflect the "active" runtime PM configuration of the consumer-supplier pair and extra care must be taken here to avoid possible destructive races with runtime PM of the consumer.

To that end, redefine the rpm_active field in struct device_link as a refcount, initialize it to 1 and make rpm_resume() (for the consumer) and device_link_add() increment it whenever they acquire a runtime PM reference on the supplier device. Accordingly, make rpm_suspend() (for the consumer) and pm_runtime_clean_up_links() decrement it and drop runtime PM references to the supplier device in a loop until rpm_active becones 1 again.

Fixes: ead18c23c263 ("driver core: Introduce device links reference counting") Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/base/core.c | 45 +++++++++++++++++++++++++++++--------------- drivers/base/power/runtime.c | 26 +++++++++++-------------- include/linux/device.h | 2 +- 3 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/drivers/base/core.c b/drivers/base/core.c index c228b4e..20ae18f 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -165,6 +165,19 @@ void device_pm_move_to_tail(struct device *dev) device_links_read_unlock(idx); }

+static void device_link_rpm_prepare(struct device *consumer, + struct device *supplier) +{ + pm_runtime_new_link(consumer); + /* + * If the link is being added by the consumer driver at probe time, + * balance the decrementation of the supplier's runtime PM usage counter + * after consumer probe in driver_probe_device(). + */ + if (consumer->links.status == DL_DEV_PROBING) + pm_runtime_get_noresume(supplier); +} + /** * device_link_add - Create a link between two devices. * @consumer: Consumer end of the link. @@ -201,7 +214,6 @@ struct device_link *device_link_add(struct device *consumer, struct device *supplier, u32 flags) { struct device_link *link; - bool rpm_put_supplier = false;

if (!consumer || !supplier || (flags & DL_FLAG_STATELESS && @@ -213,7 +225,6 @@ struct device_link *device_link_add(struct device *consumer, pm_runtime_put_noidle(supplier); return NULL; } - rpm_put_supplier = true; }

device_links_write_lock(); @@ -249,6 +260,15 @@ struct device_link *device_link_add(struct device *consumer, if (flags & DL_FLAG_AUTOREMOVE_SUPPLIER) link->flags |= DL_FLAG_AUTOREMOVE_SUPPLIER;

+ if (flags & DL_FLAG_PM_RUNTIME) { + if (!(link->flags & DL_FLAG_PM_RUNTIME)) { + device_link_rpm_prepare(consumer, supplier); + link->flags |= DL_FLAG_PM_RUNTIME; + } + if (flags & DL_FLAG_RPM_ACTIVE) + refcount_inc(&link->rpm_active); + } + kref_get(&link->kref); goto out; } @@ -257,20 +277,15 @@ struct device_link *device_link_add(struct device *consumer, if (!link) goto out;

+ refcount_set(&link->rpm_active, 1); + if (flags & DL_FLAG_PM_RUNTIME) { - if (flags & DL_FLAG_RPM_ACTIVE) { - link->rpm_active = true; - rpm_put_supplier = false; - } - pm_runtime_new_link(consumer); - /* - * If the link is being added by the consumer driver at probe - * time, balance the decrementation of the supplier's runtime PM - * usage counter after consumer probe in driver_probe_device(). - */ - if (consumer->links.status == DL_DEV_PROBING) - pm_runtime_get_noresume(supplier); + if (flags & DL_FLAG_RPM_ACTIVE) + refcount_inc(&link->rpm_active); + + device_link_rpm_prepare(consumer, supplier); } + get_device(supplier); link->supplier = supplier; INIT_LIST_HEAD(&link->s_node); @@ -333,7 +348,7 @@ struct device_link *device_link_add(struct device *consumer, device_pm_unlock(); device_links_write_unlock();

- if (rpm_put_supplier) + if ((flags & DL_FLAG_PM_RUNTIME && flags & DL_FLAG_RPM_ACTIVE) && !link) pm_runtime_put(supplier);

return link; diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index beb85c3..b914932 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -268,11 +268,8 @@ static int rpm_get_suppliers(struct device *dev) list_for_each_entry_rcu(link, &dev->links.suppliers, c_node) { int retval;

- if (!(link->flags & DL_FLAG_PM_RUNTIME)) - continue; - - if (READ_ONCE(link->status) == DL_STATE_SUPPLIER_UNBIND || - link->rpm_active) + if (!(link->flags & DL_FLAG_PM_RUNTIME) || + READ_ONCE(link->status) == DL_STATE_SUPPLIER_UNBIND) continue;

retval = pm_runtime_get_sync(link->supplier); @@ -281,7 +278,7 @@ static int rpm_get_suppliers(struct device *dev) pm_runtime_put_noidle(link->supplier); return retval; } - link->rpm_active = true; + refcount_inc(&link->rpm_active); } return 0; } @@ -290,12 +287,13 @@ static void rpm_put_suppliers(struct device *dev) { struct device_link *link;

- list_for_each_entry_rcu(link, &dev->links.suppliers, c_node) - if (link->rpm_active && - READ_ONCE(link->status) != DL_STATE_SUPPLIER_UNBIND) { + list_for_each_entry_rcu(link, &dev->links.suppliers, c_node) { + if (READ_ONCE(link->status) == DL_STATE_SUPPLIER_UNBIND) + continue; + + while (refcount_dec_not_one(&link->rpm_active)) pm_runtime_put(link->supplier); - link->rpm_active = false; - } + } }

/** @@ -1531,7 +1529,7 @@ void pm_runtime_remove(struct device *dev) * * Check links from this device to any consumers and if any of them have active * runtime PM references to the device, drop the usage counter of the device - * (once per link). + * (as many times as needed). * * Links with the DL_FLAG_STATELESS flag set are ignored. * @@ -1553,10 +1551,8 @@ void pm_runtime_clean_up_links(struct device *dev) if (link->flags & DL_FLAG_STATELESS) continue;

- if (link->rpm_active) { + while (refcount_dec_not_one(&link->rpm_active)) pm_runtime_put_noidle(dev); - link->rpm_active = false; - } }

device_links_read_unlock(idx); diff --git a/include/linux/device.h b/include/linux/device.h index 23a1529..ac3198e 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -861,7 +861,7 @@ struct device_link { struct list_head c_node; enum device_link_state status; u32 flags; - bool rpm_active; + refcount_t rpm_active; struct kref kref; #ifdef CONFIG_SRCU struct rcu_head rcu_head;

From: Vladimir Zapolskiy vz@mleia.com

[ Upstream commit 3e88bc38b9f6fe4b69cecf81badd3c19fde97f97 ]

NXP LPC32xx keypad controller requires a clock property to be defined.

The change fixes the driver initialization problem:

lpc32xx_keys 40050000.key: failed to get clock lpc32xx_keys: probe of 40050000.key failed with error -2

Fixes: 93898eb775e5 ("arm: dts: lpc32xx: add clock properties to device nodes") Signed-off-by: Vladimir Zapolskiy vz@mleia.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/arm/boot/dts/lpc32xx.dtsi | 1 + 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index ed0d6fb..d4368ee 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -462,6 +462,7 @@ key: key@40050000 { compatible = "nxp,lpc3220-key"; reg = <0x40050000 0x1000>; + clocks = <&clk LPC32XX_CLK_KEY>; interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; };

From: Vladimir Zapolskiy vz@mleia.com

[ Upstream commit 7a0790a4121cbcd111cc537cdc801c46ccb789ee ]

ARM PrimeCell PL111 LCD controller is found on On NXP LPC3230 and LPC3250 SoCs variants, the original reference in compatible property to an older one ARM PrimeCell PL110 is invalid.

Fixes: e04920d9efcb3 ("ARM: LPC32xx: DTS files for device tree conversion") Signed-off-by: Vladimir Zapolskiy vz@mleia.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/arm/boot/dts/lpc32xx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index 4f8f671..cfd422e 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -139,7 +139,7 @@ };

clcd: clcd@31040000 { - compatible = "arm,pl110", "arm,primecell"; + compatible = "arm,pl111", "arm,primecell"; reg = <0x31040000 0x1000>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_LCD>;

From: Vladimir Zapolskiy vz@mleia.com

[ Upstream commit dc141b99fc36cf910a1d8d5ee30f43f2442fd1bd ]

The fixed voltage regulator on Phytec phyCORE-LPC3250 board, which supplies SD/MMC card's power, has a constant output voltage level of either 3.15V or 3.3V, the actual value depends on JP4 position, the power rail is referenced as VCC_SDIO in the board hardware manual.

Fixes: d06670e96267 ("arm: dts: phy3250: add SD fixed regulator") Signed-off-by: Vladimir Zapolskiy vz@mleia.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/arm/boot/dts/lpc3250-phy3250.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts index 1e1c2f5..ffcf786 100644 --- a/arch/arm/boot/dts/lpc3250-phy3250.dts +++ b/arch/arm/boot/dts/lpc3250-phy3250.dts @@ -49,8 +49,8 @@ sd_reg: regulator@2 { compatible = "regulator-fixed"; regulator-name = "sd_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; gpio = <&gpio 5 5 0>; enable-active-high; };

From: Sara Sharon sara.sharon@intel.com

[ Upstream commit 608dce95db10b8ee1a26dbce3f60204bb69812a5 ]

The hash mask is a bitmap, so we should use BIT() on the enum values.

Signed-off-by: Sara Sharon sara.sharon@intel.com Fixes: 43413a975d06 ("iwlwifi: mvm: support rss queues configuration command") Signed-off-by: Luca Coelho luciano.coelho@intel.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c index 9808d95..c7e2b88 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c @@ -110,12 +110,12 @@ static int iwl_send_rss_cfg_cmd(struct iwl_mvm *mvm) int i; struct iwl_rss_config_cmd cmd = { .flags = cpu_to_le32(IWL_RSS_ENABLE), - .hash_mask = IWL_RSS_HASH_TYPE_IPV4_TCP | - IWL_RSS_HASH_TYPE_IPV4_UDP | - IWL_RSS_HASH_TYPE_IPV4_PAYLOAD | - IWL_RSS_HASH_TYPE_IPV6_TCP | - IWL_RSS_HASH_TYPE_IPV6_UDP | - IWL_RSS_HASH_TYPE_IPV6_PAYLOAD, + .hash_mask = BIT(IWL_RSS_HASH_TYPE_IPV4_TCP) | + BIT(IWL_RSS_HASH_TYPE_IPV4_UDP) | + BIT(IWL_RSS_HASH_TYPE_IPV4_PAYLOAD) | + BIT(IWL_RSS_HASH_TYPE_IPV6_TCP) | + BIT(IWL_RSS_HASH_TYPE_IPV6_UDP) | + BIT(IWL_RSS_HASH_TYPE_IPV6_PAYLOAD), };

if (mvm->trans->num_rx_queues == 1)

From: Paul Cercueil paul@crapouillou.net

[ Upstream commit b7e29924a1a628aec60d18651b493fa1601bf944 ]

The UDC clock is gated when the bit is cleared, not when it is set.

Signed-off-by: Paul Cercueil paul@crapouillou.net Tested-by: Artur Rojek contact@artur-rojek.eu Fixes: 2b555a4b9cae ("clk: ingenic: Add missing flag for UDC clock") Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/clk/ingenic/jz4740-cgu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/ingenic/jz4740-cgu.c b/drivers/clk/ingenic/jz4740-cgu.c index 4479c10..b86edd3 100644 --- a/drivers/clk/ingenic/jz4740-cgu.c +++ b/drivers/clk/ingenic/jz4740-cgu.c @@ -165,7 +165,7 @@ .parents = { JZ4740_CLK_EXT, JZ4740_CLK_PLL_HALF, -1, -1 }, .mux = { CGU_REG_CPCCR, 29, 1 }, .div = { CGU_REG_CPCCR, 23, 1, 6, -1, -1, -1 }, - .gate = { CGU_REG_SCR, 6 }, + .gate = { CGU_REG_SCR, 6, true }, },

/* Gate-only clocks */

From: Michael Kao michael.kao@mediatek.com

[ Upstream commit eb9aecd90d1a39601e91cd08b90d5fee51d321a6 ]

The index of msr and adcpnp should match the sensor which belongs to the selected bank in the for loop.

Fixes: b7cf0053738c ("thermal: Add Mediatek thermal driver for mt2701.") Signed-off-by: Michael Kao michael.kao@mediatek.com Signed-off-by: Eduardo Valentin edubezval@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/thermal/mtk_thermal.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c index 0691f26..f646436 100644 --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -431,7 +431,8 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank) u32 raw;

for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) { - raw = readl(mt->thermal_base + conf->msr[i]); + raw = readl(mt->thermal_base + + conf->msr[conf->bank_data[bank->id].sensors[i]]);

temp = raw_to_mcelsius(mt, conf->bank_data[bank->id].sensors[i], @@ -568,7 +569,8 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,

for (i = 0; i < conf->bank_data[num].num_sensors; i++) writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]], - mt->thermal_base + conf->adcpnp[i]); + mt->thermal_base + + conf->adcpnp[conf->bank_data[num].sensors[i]]);

writel((1 << conf->bank_data[num].num_sensors) - 1, mt->thermal_base + TEMP_MONCTL0);

From: Rakesh Pillai pillair@codeaurora.org

[ Upstream commit 6e8a8991e2103dcb6a9cff28f460390e8e360848 ]

The management frames transmitted are dma mapped with direction TO_DEVICE, but incorrectly mapped with direction FROM_DEVICE during tx complete and error cases.

Fix the direction of dma during dma unmap of the transmitted management frames.

Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1

Fixes: 38a1390e02b7 ("ath10k: dma unmap mgmt tx buffer if wmi cmd send fails") Signed-off-by: Rakesh Pillai pillair@codeaurora.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/wireless/ath/ath10k/mac.c | 4 ++-- drivers/net/wireless/ath/ath10k/wmi.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 448e3a8..a09d7a0 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1,7 +1,7 @@ /* * Copyright (c) 2005-2011 Atheros Communications Inc. * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. - * Copyright (c) 2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -3853,7 +3853,7 @@ void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work) ath10k_warn(ar, "failed to transmit management frame by ref via WMI: %d\n", ret); dma_unmap_single(ar->dev, paddr, skb->len, - DMA_FROM_DEVICE); + DMA_TO_DEVICE); ieee80211_free_txskb(ar->hw, skb); } } else { diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index aefc92d..0f6ff7a 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -1,7 +1,7 @@ /* * Copyright (c) 2005-2011 Atheros Communications Inc. * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. - * Copyright (c) 2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -2340,7 +2340,7 @@ static int wmi_process_mgmt_tx_comp(struct ath10k *ar, u32 desc_id,

msdu = pkt_addr->vaddr; dma_unmap_single(ar->dev, pkt_addr->paddr, - msdu->len, DMA_FROM_DEVICE); + msdu->len, DMA_TO_DEVICE); info = IEEE80211_SKB_CB(msdu);

if (status)

From: Uwe Kleine-König u.kleine-koenig@pengutronix.de

[ Upstream commit 3f929cad943380370b6db31fcb7a38d898d91089 ]

When the EXTENSION.WADA bit is set, register 0x19 contains a bitmap of week days, not a day of month. As Linux only handles a single alarm without repetition using day of month is more flexible, so clear this bit. (Otherwise a value depending on time.tm_wday would have to be written to register 0x19.)

Also optimize setting the AIE bit to use a single register write instead of a bulk write of three registers.

Fixes: ee0981be7704 ("rtc: ds1307: Add support for Epson RX8130CE") Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/rtc/rtc-ds1307.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index 71396b6..ebd59e8 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -749,8 +749,8 @@ static int rx8130_set_alarm(struct device *dev, struct rtc_wkalrm *t) if (ret < 0) return ret;

- ctl[0] &= ~RX8130_REG_EXTENSION_WADA; - ctl[1] |= RX8130_REG_FLAG_AF; + ctl[0] &= RX8130_REG_EXTENSION_WADA; + ctl[1] &= ~RX8130_REG_FLAG_AF; ctl[2] &= ~RX8130_REG_CONTROL0_AIE;

ret = regmap_bulk_write(ds1307->regmap, RX8130_REG_EXTENSION, ctl, @@ -773,8 +773,7 @@ static int rx8130_set_alarm(struct device *dev, struct rtc_wkalrm *t)

ctl[2] |= RX8130_REG_CONTROL0_AIE;

- return regmap_bulk_write(ds1307->regmap, RX8130_REG_EXTENSION, ctl, - sizeof(ctl)); + return regmap_write(ds1307->regmap, RX8130_REG_CONTROL0, ctl[2]); }

static int rx8130_alarm_irq_enable(struct device *dev, unsigned int enabled)

From: Colin Ian King colin.king@canonical.com

[ Upstream commit dc9e47160626cdb58d5c39a4f43dcfdb27a5c004 ]

Shifting a u8 by 24 will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an unsigned long will sign extend the value causing the upper 32 bits to be set in the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#144925-144928 ("Unintended sign extension")

Fixes: 008b30408c40 ("mfd: Add rtc support to 88pm860x") Signed-off-by: Colin Ian King colin.king@canonical.com Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/rtc/rtc-88pm860x.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/rtc/rtc-88pm860x.c b/drivers/rtc/rtc-88pm860x.c index fbcf13b..73697e4 100644 --- a/drivers/rtc/rtc-88pm860x.c +++ b/drivers/rtc/rtc-88pm860x.c @@ -115,11 +115,13 @@ static int pm860x_rtc_read_time(struct device *dev, struct rtc_time *tm) pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf); dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]); - base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7]; + base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) | + (buf[5] << 8) | buf[7];

/* load 32-bit read-only counter */ pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf); - data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0]; + data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | + (buf[1] << 8) | buf[0]; ticks = base + data; dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n", base, data, ticks); @@ -145,7 +147,8 @@ static int pm860x_rtc_set_time(struct device *dev, struct rtc_time *tm)

/* load 32-bit read-only counter */ pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf); - data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0]; + data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | + (buf[1] << 8) | buf[0]; base = ticks - data; dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n", base, data, ticks); @@ -170,10 +173,12 @@ static int pm860x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf); dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]); - base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7]; + base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) | + (buf[5] << 8) | buf[7];

pm860x_bulk_read(info->i2c, PM8607_RTC_EXPIRE1, 4, buf); - data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0]; + data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | + (buf[1] << 8) | buf[0]; ticks = base + data; dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n", base, data, ticks); @@ -198,11 +203,13 @@ static int pm860x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf); dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]); - base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7]; + base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) | + (buf[5] << 8) | buf[7];

/* load 32-bit read-only counter */ pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf); - data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0]; + data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | + (buf[1] << 8) | buf[0]; ticks = base + data; dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n", base, data, ticks);

From: Colin Ian King colin.king@canonical.com

[ Upstream commit e42280886018c6f77f0a90190f7cba344b0df3e0 ]

Shifting a u8 by 24 will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an unsigned long will sign extend the value causing the upper 32 bits to be set in the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#1309693 ("Unintended sign extension")

Fixes: 9a9a54ad7aa2 ("drivers/rtc: add support for Qualcomm PMIC8xxx RTC") Signed-off-by: Colin Ian King colin.king@canonical.com Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/rtc/rtc-pm8xxx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c index 29358a0..e03104b 100644 --- a/drivers/rtc/rtc-pm8xxx.c +++ b/drivers/rtc/rtc-pm8xxx.c @@ -213,7 +213,8 @@ static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm) } }

- secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24); + secs = value[0] | (value[1] << 8) | (value[2] << 16) | + ((unsigned long)value[3] << 24);

rtc_time_to_tm(secs, tm);

@@ -288,7 +289,8 @@ static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) return rc; }

- secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24); + secs = value[0] | (value[1] << 8) | (value[2] << 16) | + ((unsigned long)value[3] << 24);

rtc_time_to_tm(secs, &alarm->time);

From: Steve Wise swise@opengridcomputing.com

[ Upstream commit cb3ba0bde881f0cb7e3945d2a266901e2bd18c92 ]

import_ep() is passed the correct tos, but doesn't use it correctly.

Fixes: ac8e4c69a021 ("cxgb4/iw_cxgb4: TOS support") Signed-off-by: Steve Wise swise@opengridcomputing.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/infiniband/hw/cxgb4/cm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 1b3d014..3c8b7ea 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -2076,7 +2076,7 @@ static int import_ep(struct c4iw_ep *ep, int iptype, __u8 *peer_ip, } else { pdev = get_real_dev(n->dev); ep->l2t = cxgb4_l2t_get(cdev->rdev.lldi.l2t, - n, pdev, 0); + n, pdev, rt_tos2priority(tos)); if (!ep->l2t) goto out; ep->mtu = dst_mtu(dst);

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit 9e05352340d3a3e68c144136db9810b26ebb88c3 ]

The etnaviv_gem_prime_get_sg_table() is supposed to return error pointers. Otherwise it can lead to a NULL dereference when it's called from drm_gem_map_dma_buf().

Fixes: 5f4a4a73f437 ("drm/etnaviv: fix gem_prime_get_sg_table to return new SG table") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Reviewed-by: Christian Gmeiner christian.gmeiner@gmail.com Signed-off-by: Lucas Stach l.stach@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c b/drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c index 0566171..f21529e 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c @@ -15,7 +15,7 @@ struct sg_table *etnaviv_gem_prime_get_sg_table(struct drm_gem_object *obj) int npages = obj->size >> PAGE_SHIFT;

if (WARN_ON(!etnaviv_obj->pages)) /* should have already pinned! */ - return NULL; + return ERR_PTR(-EINVAL);

return drm_prime_pages_to_sg(etnaviv_obj->pages, npages); }

From: Wesley Sheng wesley.sheng@microchip.com

[ Upstream commit d123fab71f63aae129aebe052664fda73131921a ]

The number of available NT req id mapping table entries per NTB control register is 512. The driver mistakenly limits the number to 256.

Fix the array size of NT req id mapping table.

Fixes: c082b04c9d40 ("NTB: switchtec: Add NTB hardware register definitions") Signed-off-by: Wesley Sheng wesley.sheng@microchip.com Reviewed-by: Logan Gunthorpe logang@deltatee.com Signed-off-by: Jon Mason jdmason@kudzu.us Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- include/linux/switchtec.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/switchtec.h b/include/linux/switchtec.h index ab400af..623719c9 100644 --- a/include/linux/switchtec.h +++ b/include/linux/switchtec.h @@ -244,8 +244,8 @@ struct ntb_ctrl_regs { u64 xlate_addr; } bar_entry[6]; u32 reserved2[216]; - u32 req_id_table[256]; - u32 reserved3[512]; + u32 req_id_table[512]; + u32 reserved3[256]; u64 lut_entry[512]; } __packed;

From: Geert Uytterhoeven geert+renesas@glider.be

[ Upstream commit a4b0350047f1b10207e25e72d7cd3f7826e93769 ]

The entry for "scifb2_data_c" in the SCIFB2 pin group array contains a typo, thus the group cannot be selected.

Fixes: 5088451962389924 ("pinctrl: sh-pfc: r8a7791 PFC support") Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Reviewed-by: Simon Horman horms+renesas@verge.net.au Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/pinctrl/sh-pfc/pfc-r8a7791.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c index 6236ac5..9eb860c 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c @@ -5239,7 +5239,7 @@ enum { "scifb2_data_b", "scifb2_clk_b", "scifb2_ctrl_b", - "scifb0_data_c", + "scifb2_data_c", "scifb2_clk_c", "scifb2_data_d", };

From: Geert Uytterhoeven geert+renesas@glider.be

[ Upstream commit 0e6e448bdcf896d001a289a6112a704542d51516 ]

There are two pin groups for the FSIC SPDIF signal, but the FSIC pin group array lists only one, and it refers to a nonexistent group.

Fixes: 2ecd4154c906b7d6 ("sh-pfc: sh73a0: Add FSI pin groups and functions") Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Reviewed-by: Simon Horman horms+renesas@verge.net.au Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/pinctrl/sh-pfc/pfc-sh73a0.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c index f8fbedb..6dca760 100644 --- a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c +++ b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c @@ -3367,7 +3367,8 @@ enum { "fsic_sclk_out", "fsic_data_in", "fsic_data_out", - "fsic_spdif", + "fsic_spdif_0", + "fsic_spdif_1", };

static const char * const fsid_groups[] = {

From: "Rafael J. Wysocki" rafael.j.wysocki@intel.com

[ Upstream commit 4c06c4e6cf63d7f3d5dfe62593a073253d750a59 ]

If a stateless device link to a certain supplier with DL_FLAG_PM_RUNTIME set in the flags is added and then removed by the consumer driver's probe callback, the supplier's PM-runtime usage counter will be nonzero after that which effectively causes the supplier to remain "always on" going forward.

Namely, device_link_add() called to add the link invokes device_link_rpm_prepare() which notices that the consumer driver is probing, so it increments the supplier's PM-runtime usage counter with the assumption that the link will stay around until pm_runtime_put_suppliers() is called by driver_probe_device(), but if the link goes away before that point, the supplier's PM-runtime usage counter will remain nonzero.

To prevent that from happening, first rework pm_runtime_get_suppliers() and pm_runtime_put_suppliers() to use the rpm_active refounts of device links and make the latter only drop rpm_active and the supplier's PM-runtime usage counter for each link by one, unless rpm_active is one already for it. Next, modify device_link_add() to bump up the new link's rpm_active refcount and the suppliers PM-runtime usage counter by two, to prevent pm_runtime_put_suppliers(), if it is called subsequently, from suspending the supplier prematurely (in case its PM-runtime usage counter goes down to 0 in there).

Due to the way rpm_put_suppliers() works, this change does not affect runtime suspend of the consumer ends of new device links (or, generally, device links for which DL_FLAG_PM_RUNTIME has just been set).

Fixes: e2f3cd831a28 ("driver core: Fix handling of runtime PM flags in device_link_add()") Reported-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Reviewed-by: Ulf Hansson ulf.hansson@linaro.org Tested-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/base/core.c | 21 ++++----------------- drivers/base/power/runtime.c | 27 +++++++++++++++++++++++++-- include/linux/pm_runtime.h | 4 ++++ 3 files changed, 33 insertions(+), 19 deletions(-)

diff --git a/drivers/base/core.c b/drivers/base/core.c index 7599147..ab08211 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -165,19 +165,6 @@ void device_pm_move_to_tail(struct device *dev) device_links_read_unlock(idx); }

-static void device_link_rpm_prepare(struct device *consumer, - struct device *supplier) -{ - pm_runtime_new_link(consumer); - /* - * If the link is being added by the consumer driver at probe time, - * balance the decrementation of the supplier's runtime PM usage counter - * after consumer probe in driver_probe_device(). - */ - if (consumer->links.status == DL_DEV_PROBING) - pm_runtime_get_noresume(supplier); -} - /** * device_link_add - Create a link between two devices. * @consumer: Consumer end of the link. @@ -262,11 +249,11 @@ struct device_link *device_link_add(struct device *consumer,

if (flags & DL_FLAG_PM_RUNTIME) { if (!(link->flags & DL_FLAG_PM_RUNTIME)) { - device_link_rpm_prepare(consumer, supplier); + pm_runtime_new_link(consumer); link->flags |= DL_FLAG_PM_RUNTIME; } if (flags & DL_FLAG_RPM_ACTIVE) - refcount_inc(&link->rpm_active); + pm_runtime_active_link(link, supplier); }

kref_get(&link->kref); @@ -281,9 +268,9 @@ struct device_link *device_link_add(struct device *consumer,

if (flags & DL_FLAG_PM_RUNTIME) { if (flags & DL_FLAG_RPM_ACTIVE) - refcount_inc(&link->rpm_active); + pm_runtime_active_link(link, supplier);

- device_link_rpm_prepare(consumer, supplier); + pm_runtime_new_link(consumer); }

get_device(supplier); diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index ab454c45..0527890 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -1570,8 +1570,10 @@ void pm_runtime_get_suppliers(struct device *dev) idx = device_links_read_lock();

list_for_each_entry_rcu(link, &dev->links.suppliers, c_node) - if (link->flags & DL_FLAG_PM_RUNTIME) + if (link->flags & DL_FLAG_PM_RUNTIME) { + refcount_inc(&link->rpm_active); pm_runtime_get_sync(link->supplier); + }

device_links_read_unlock(idx); } @@ -1588,7 +1590,8 @@ void pm_runtime_put_suppliers(struct device *dev) idx = device_links_read_lock();

list_for_each_entry_rcu(link, &dev->links.suppliers, c_node) - if (link->flags & DL_FLAG_PM_RUNTIME) + if (link->flags & DL_FLAG_PM_RUNTIME && + refcount_dec_not_one(&link->rpm_active)) pm_runtime_put(link->supplier);

device_links_read_unlock(idx); @@ -1601,6 +1604,26 @@ void pm_runtime_new_link(struct device *dev) spin_unlock_irq(&dev->power.lock); }

+/** + * pm_runtime_active_link - Set up new device link as active for PM-runtime. + * @link: Device link to be set up as active. + * @supplier: Supplier end of the link. + * + * Add 2 to the rpm_active refcount of @link and increment the PM-runtime + * usage counter of @supplier once more in case the link is being added while + * the consumer driver is probing and pm_runtime_put_suppliers() will be called + * subsequently. + * + * Note that this doesn't prevent rpm_put_suppliers() from decreasing the link's + * rpm_active refcount down to one, so runtime suspend of the consumer end of + * @link is not affected. + */ +void pm_runtime_active_link(struct device_link *link, struct device *supplier) +{ + refcount_add(2, &link->rpm_active); + pm_runtime_get_noresume(supplier); +} + void pm_runtime_drop_link(struct device *dev) { spin_lock_irq(&dev->power.lock); diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index f0fc470..bace7df 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -59,6 +59,8 @@ extern void pm_runtime_update_max_time_suspended(struct device *dev, extern void pm_runtime_get_suppliers(struct device *dev); extern void pm_runtime_put_suppliers(struct device *dev); extern void pm_runtime_new_link(struct device *dev); +extern void pm_runtime_active_link(struct device_link *link, + struct device *supplier); extern void pm_runtime_drop_link(struct device *dev);

static inline void pm_suspend_ignore_children(struct device *dev, bool enable) @@ -176,6 +178,8 @@ static inline void pm_runtime_clean_up_links(struct device *dev) {} static inline void pm_runtime_get_suppliers(struct device *dev) {} static inline void pm_runtime_put_suppliers(struct device *dev) {} static inline void pm_runtime_new_link(struct device *dev) {} +static inline void pm_runtime_active_link(struct device_link *link, + struct device *supplier) {} static inline void pm_runtime_drop_link(struct device *dev) {}

#endif /* !CONFIG_PM */

From: Florian Fainelli f.fainelli@gmail.com

[ Upstream commit fea83353177a55540c71c140887737c282137aa2 ]

We were not consistent in how the default VID of a given port was defined, b53_br_leave() would make sure the VLAN ID would be either 0/1 depending on the switch generation, but b53_configure_vlan(), which is the default configuration would unconditionally set it to 1. The correct value is 1 for 5325/5365 series and 0 otherwise. To avoid repeating that mistake ever again, introduce a helper function: b53_default_pvid() to factor that out.

Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/dsa/b53/b53_common.c | 29 ++++++++++++++++------------- 1 file changed, 16 insertions(+), 13 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index 2d3a2cb..bceda1e 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -622,15 +622,25 @@ static void b53_enable_mib(struct b53_device *dev) b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc); }

+static u16 b53_default_pvid(struct b53_device *dev) +{ + if (is5325(dev) || is5365(dev)) + return 1; + else + return 0; +} + int b53_configure_vlan(struct dsa_switch *ds) { struct b53_device *dev = ds->priv; struct b53_vlan vl = { 0 }; - int i; + int i, def_vid; + + def_vid = b53_default_pvid(dev);

/* clear all vlan entries */ if (is5325(dev) || is5365(dev)) { - for (i = 1; i < dev->num_vlans; i++) + for (i = def_vid; i < dev->num_vlans; i++) b53_set_vlan_entry(dev, i, &vl); } else { b53_do_vlan_op(dev, VTA_CMD_CLEAR); @@ -640,7 +650,7 @@ int b53_configure_vlan(struct dsa_switch *ds)

b53_for_each_port(dev, i) b53_write16(dev, B53_VLAN_PAGE, - B53_VLAN_PORT_DEF_TAG(i), 1); + B53_VLAN_PORT_DEF_TAG(i), def_vid);

if (!is5325(dev) && !is5365(dev)) b53_set_jumbo(dev, dev->enable_jumbo, false); @@ -1142,12 +1152,8 @@ int b53_vlan_del(struct dsa_switch *ds, int port,

vl->members &= ~BIT(port);

- if (pvid == vid) { - if (is5325(dev) || is5365(dev)) - pvid = 1; - else - pvid = 0; - } + if (pvid == vid) + pvid = b53_default_pvid(dev);

if (untagged && !dsa_is_cpu_port(ds, port)) vl->untag &= ~(BIT(port)); @@ -1460,10 +1466,7 @@ void b53_br_leave(struct dsa_switch *ds, int port, struct net_device *br) b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan); dev->ports[port].vlan_ctl_mask = pvlan;

- if (is5325(dev) || is5365(dev)) - pvid = 1; - else - pvid = 0; + pvid = b53_default_pvid(dev);

/* Make this port join all VLANs without VLAN entries */ if (is58xx(dev)) {

From: Florian Fainelli f.fainelli@gmail.com

[ Upstream commit 10163aaee9671b01b2f4737922e1a4f43581047a ]

The CPU port is special and does not need to obey VLAN restrictions as far as untagged traffic goes, also, having the CPU port be part of a particular PVID is against the idea of keeping it tagged in all VLANs.

Fixes: ca8931948344 ("net: dsa: b53: Keep CPU port as tagged in all VLANs") Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/dsa/b53/b53_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index 426ec1c..9f21e71 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -1175,7 +1175,7 @@ void b53_vlan_add(struct dsa_switch *ds, int port, b53_fast_age_vlan(dev, vid); }

- if (pvid) { + if (pvid && !dsa_is_cpu_port(ds, port)) { b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), vlan->vid_end); b53_fast_age_vlan(dev, vid);

From: Jacopo Mondi jacopo+renesas@jmondi.org

[ Upstream commit 5c88ee02932a964096cbbcc7c9f38b78d230bacb ]

Since the removal of the stale soc_camera headers, Migo-R board fails to build due to missing dma-mapping include directive.

Include missing dma-mapping.h header in Migo-R board file to fix the build error.

Fixes: a50c7738e8ae ("media: sh: migor: Remove stale soc_camera include")

Signed-off-by: Jacopo Mondi jacopo+renesas@jmondi.org Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/sh/boards/mach-migor/setup.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 254f2c6..6cd3cd4 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -5,6 +5,7 @@ * Copyright (C) 2008 Magnus Damm */ #include <linux/clkdev.h> +#include <linux/dma-mapping.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/interrupt.h>

From: Vadim Pasternak vadimp@mellanox.com

[ Upstream commit ff066653aeed8ee2d4dadb1e35774dd91ecbb19f ]

Fix tps53679_probe() by using dynamically allocated "pmbus_driver_info" structure instead of static. Usage of static structures causes overwritten of the field "vrm_version", in case the system is equipped with several tps53679 devices with the different "vrm_version". In such case the last probed device overwrites this field for all others.

Fixes: 610526527a13 ("hwmon: (pmbus) Add support for Texas Instruments tps53679 device") Signed-off-by: Vadim Pasternak vadimp@mellanox.com Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/hwmon/pmbus/tps53679.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/pmbus/tps53679.c b/drivers/hwmon/pmbus/tps53679.c index 85b515c..2bc352c 100644 --- a/drivers/hwmon/pmbus/tps53679.c +++ b/drivers/hwmon/pmbus/tps53679.c @@ -80,7 +80,14 @@ static int tps53679_identify(struct i2c_client *client, static int tps53679_probe(struct i2c_client *client, const struct i2c_device_id *id) { - return pmbus_do_probe(client, id, &tps53679_info); + struct pmbus_driver_info *info; + + info = devm_kmemdup(&client->dev, &tps53679_info, sizeof(*info), + GFP_KERNEL); + if (!info) + return -ENOMEM; + + return pmbus_do_probe(client, id, info); }

static const struct i2c_device_id tps53679_id[] = {

From: Alexey Kardashevskiy aik@ozlabs.ru

[ Upstream commit a67614cc05a5052b265ea48196dab2fce11f5f2e ]

The SPAPR TCE KVM device references all hardware IOMMU tables assigned to some IOMMU group to ensure that in-kernel KVM acceleration of H_PUT_TCE can work. The tables are references when an IOMMU group gets registered with the VFIO KVM device by the KVM_DEV_VFIO_GROUP_ADD ioctl; KVM_DEV_VFIO_GROUP_DEL calls into the dereferencing code in kvm_spapr_tce_release_iommu_group() which walks through the list of LIOBNs, finds a matching IOMMU table and calls kref_put() when found.

However that code stops after the very first successful derefencing leaving other tables referenced till the SPAPR TCE KVM device is destroyed which normally happens on guest reboot or termination so if we do hotplug and unplug in a loop, we are leaking IOMMU tables here.

This removes a premature return to let kvm_spapr_tce_release_iommu_group() find and dereference all attached tables.

Fixes: 121f80ba68f ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO") Signed-off-by: Alexey Kardashevskiy aik@ozlabs.ru Signed-off-by: Paul Mackerras paulus@ozlabs.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- arch/powerpc/kvm/book3s_64_vio.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/arch/powerpc/kvm/book3s_64_vio.c b/arch/powerpc/kvm/book3s_64_vio.c index 0c6478f..1d105f0 100644 --- a/arch/powerpc/kvm/book3s_64_vio.c +++ b/arch/powerpc/kvm/book3s_64_vio.c @@ -134,7 +134,6 @@ extern void kvm_spapr_tce_release_iommu_group(struct kvm *kvm, continue;

kref_put(&stit->kref, kvm_spapr_tce_liobn_put); - return; } } }

From: Robin Murphy robin.murphy@arm.com

[ Upstream commit 3e5daee5ecf314da33a890fabaa2404244cd2a36 ]

Using dma_dev->dev for mappings before it's assigned with the correct device is unlikely to work as expected, and with future dma-direct changes, passing a NULL device may end up crashing entirely. I don't know enough about this hardware or the mv_xor_prep_dma_interrupt() operation to implement the appropriate error-handling logic that would have revealed those dma_map_single() calls failing on arm64 for as long as the driver has been enabled there, but moving the assignment earlier will at least make the current code operate as intended.

Fixes: 22843545b200 ("dma: mv_xor: Add support for DMA_INTERRUPT") Reported-by: John David Anglin dave.anglin@bell.net Tested-by: John David Anglin dave.anglin@bell.net Signed-off-by: Robin Murphy robin.murphy@arm.com Acked-by: Thomas Petazzoni thomas.petazzoni@bootlin.com Tested-by: Thomas Petazzoni thomas.petazzoni@bootlin.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/dma/mv_xor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index 969534c..abc8d3e 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -1059,6 +1059,7 @@ static int mv_xor_channel_remove(struct mv_xor_chan *mv_chan) mv_chan->op_in_desc = XOR_MODE_IN_DESC;

dma_dev = &mv_chan->dmadev; + dma_dev->dev = &pdev->dev; mv_chan->xordev = xordev;

/* @@ -1091,7 +1092,6 @@ static int mv_xor_channel_remove(struct mv_xor_chan *mv_chan) dma_dev->device_free_chan_resources = mv_xor_free_chan_resources; dma_dev->device_tx_status = mv_xor_status; dma_dev->device_issue_pending = mv_xor_issue_pending; - dma_dev->dev = &pdev->dev;

/* set prep routines based on capability */ if (dma_has_cap(DMA_INTERRUPT, dma_dev->cap_mask))

From: Arend van Spriel arend.vanspriel@broadcom.com

[ Upstream commit aaf6a5e86e36766abbeedf220462bde8031f9a72 ]

Since we moved the drivers debugfs directory under ieee80211 debugfs the debugfs entries need to be added after wiphy_register() has been called. For most part that has been done accordingly, but for the debugfs entries added by SDIO it was not and failed silently. This patch fixes that by adding a bus-layer callback for it.

Fixes: 856d5a011c86 ("brcmfmac: allocate struct brcmf_pub instance using wiphy_new()") Reported-by: Russel King linux@armlinux.org.uk Reviewed-by: Franky Lin franky.lin@broadcom.com Signed-off-by: Arend van Spriel arend.vanspriel@broadcom.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h | 10 ++++++++++ drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 1 + drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 12 +++++++----- 3 files changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h index c496518..3d441c5 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h @@ -90,6 +90,7 @@ struct brcmf_bus_ops { int (*get_memdump)(struct device *dev, void *data, size_t len); int (*get_fwname)(struct device *dev, const char *ext, unsigned char *fw_name); + void (*debugfs_create)(struct device *dev); };

@@ -235,6 +236,15 @@ int brcmf_bus_get_fwname(struct brcmf_bus *bus, const char *ext, return bus->ops->get_fwname(bus->dev, ext, fw_name); }

+static inline +void brcmf_bus_debugfs_create(struct brcmf_bus *bus) +{ + if (!bus->ops->debugfs_create) + return; + + return bus->ops->debugfs_create(bus->dev); +} + /* * interface functions from common layer */ diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c index 584e05f..9d7b883 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c @@ -1105,6 +1105,7 @@ static int brcmf_bus_started(struct brcmf_pub *drvr, struct cfg80211_ops *ops) brcmf_debugfs_add_entry(drvr, "revinfo", brcmf_revinfo_read); brcmf_feat_debugfs_create(drvr); brcmf_proto_debugfs_create(drvr); + brcmf_bus_debugfs_create(bus_if);

return 0;

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index abaed2f..5c3b62e 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -3131,9 +3131,12 @@ static int brcmf_debugfs_sdio_count_read(struct seq_file *seq, void *data) return 0; }

-static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus) +static void brcmf_sdio_debugfs_create(struct device *dev) { - struct brcmf_pub *drvr = bus->sdiodev->bus_if->drvr; + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_pub *drvr = bus_if->drvr; + struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; + struct brcmf_sdio *bus = sdiodev->bus; struct dentry *dentry = brcmf_debugfs_get_devdir(drvr);

if (IS_ERR_OR_NULL(dentry)) @@ -3153,7 +3156,7 @@ static int brcmf_sdio_checkdied(struct brcmf_sdio *bus) return 0; }

-static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus) +static void brcmf_sdio_debugfs_create(struct device *dev) { } #endif /* DEBUG */ @@ -3438,8 +3441,6 @@ static int brcmf_sdio_bus_preinit(struct device *dev) if (bus->rxbuf) bus->rxblen = value;

- brcmf_sdio_debugfs_create(bus); - /* the commands below use the terms tx and rx from * a device perspective, ie. bus:txglom affects the * bus transfers from device to host. @@ -4050,6 +4051,7 @@ int brcmf_sdio_get_fwname(struct device *dev, const char *ext, u8 *fw_name) .get_ramsize = brcmf_sdio_bus_get_ramsize, .get_memdump = brcmf_sdio_bus_get_memdump, .get_fwname = brcmf_sdio_get_fwname, + .debugfs_create = brcmf_sdio_debugfs_create };

#define BRCMF_SDIO_FW_CODE 0

From: Axel Lin axel.lin@ingics.com

[ Upstream commit 3c413f594c4f9df40061445667ca11a12bc8ee34 ]

Fix off-by-one while iterating current_limits array. The valid index should be 0 ~ n_current_limits -1.

Fixes: 99cf3af5e2d5 ("regulator: pv88080: new regulator driver") Signed-off-by: Axel Lin axel.lin@ingics.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/regulator/pv88080-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/pv88080-regulator.c b/drivers/regulator/pv88080-regulator.c index 9a08cb2..6770e4d 100644 --- a/drivers/regulator/pv88080-regulator.c +++ b/drivers/regulator/pv88080-regulator.c @@ -279,7 +279,7 @@ static int pv88080_set_current_limit(struct regulator_dev *rdev, int min, int i;

/* search for closest to maximum */ - for (i = info->n_current_limits; i >= 0; i--) { + for (i = info->n_current_limits - 1; i >= 0; i--) { if (min <= info->current_limits[i] && max >= info->current_limits[i]) { return regmap_update_bits(rdev->regmap,

From: Vinod Koul vkoul@kernel.org

[ Upstream commit a968b5e9d5879f9535d6099505f9e14abcafb623 ]

RGMII_ID specifies that we should have internal delay, so resurrect the delay addition routine but under the RGMII_ID mode.

Fixes: 40269aa9f40a ("net: dsa: qca8k: disable delay for RGMII mode") Tested-by: Michal Vokáč michal.vokac@ysoft.com Signed-off-by: Vinod Koul vkoul@kernel.org Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/net/dsa/qca8k.c | 12 ++++++++++++ drivers/net/dsa/qca8k.h | 1 + 2 files changed, 13 insertions(+)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index 33232cc..6c04f32 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -451,6 +451,18 @@ qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL, QCA8K_PORT_PAD_RGMII_RX_DELAY_EN); break; + case PHY_INTERFACE_MODE_RGMII_ID: + /* RGMII_ID needs internal delay. This is enabled through + * PORT5_PAD_CTRL for all ports, rather than individual port + * registers + */ + qca8k_write(priv, reg, + QCA8K_PORT_PAD_RGMII_EN | + QCA8K_PORT_PAD_RGMII_TX_DELAY(QCA8K_MAX_DELAY) | + QCA8K_PORT_PAD_RGMII_RX_DELAY(QCA8K_MAX_DELAY)); + qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL, + QCA8K_PORT_PAD_RGMII_RX_DELAY_EN); + break; case PHY_INTERFACE_MODE_SGMII: qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN); break; diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h index 613fe5c5..d146e54 100644 --- a/drivers/net/dsa/qca8k.h +++ b/drivers/net/dsa/qca8k.h @@ -40,6 +40,7 @@ ((0x8 + (x & 0x3)) << 22) #define QCA8K_PORT_PAD_RGMII_RX_DELAY(x) \ ((0x10 + (x & 0x3)) << 20) +#define QCA8K_MAX_DELAY 3 #define QCA8K_PORT_PAD_RGMII_RX_DELAY_EN BIT(24) #define QCA8K_PORT_PAD_SGMII_EN BIT(7) #define QCA8K_REG_MODULE_EN 0x030