From: Luís Henriques lhenriques@suse.de
mainline inclusion from mainline-v6.0-rc7 commit 29a5b8a137ac8eb410cc823653a29ac0e7b7e1b0 category: bugfix bugzilla: 187444, https://gitee.com/openeuler/kernel/issues/I6261Z CVE: NA
--------------------------------
When walking through an inode extents, the ext4_ext_binsearch_idx() function assumes that the extent header has been previously validated. However, there are no checks that verify that the number of entries (eh->eh_entries) is non-zero when depth is > 0. And this will lead to problems because the EXT_FIRST_INDEX() and EXT_LAST_INDEX() will return garbage and result in this:
[ 135.245946] ------------[ cut here ]------------ [ 135.247579] kernel BUG at fs/ext4/extents.c:2258! [ 135.249045] invalid opcode: 0000 [#1] PREEMPT SMP [ 135.250320] CPU: 2 PID: 238 Comm: tmp118 Not tainted 5.19.0-rc8+ #4 [ 135.252067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 [ 135.255065] RIP: 0010:ext4_ext_map_blocks+0xc20/0xcb0 [ 135.256475] Code: [ 135.261433] RSP: 0018:ffffc900005939f8 EFLAGS: 00010246 [ 135.262847] RAX: 0000000000000024 RBX: ffffc90000593b70 RCX: 0000000000000023 [ 135.264765] RDX: ffff8880038e5f10 RSI: 0000000000000003 RDI: ffff8880046e922c [ 135.266670] RBP: ffff8880046e9348 R08: 0000000000000001 R09: ffff888002ca580c [ 135.268576] R10: 0000000000002602 R11: 0000000000000000 R12: 0000000000000024 [ 135.270477] R13: 0000000000000000 R14: 0000000000000024 R15: 0000000000000000 [ 135.272394] FS: 00007fdabdc56740(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 [ 135.274510] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 135.276075] CR2: 00007ffc26bd4f00 CR3: 0000000006261004 CR4: 0000000000170ea0 [ 135.277952] Call Trace: [ 135.278635] <TASK> [ 135.279247] ? preempt_count_add+0x6d/0xa0 [ 135.280358] ? percpu_counter_add_batch+0x55/0xb0 [ 135.281612] ? _raw_read_unlock+0x18/0x30 [ 135.282704] ext4_map_blocks+0x294/0x5a0 [ 135.283745] ? xa_load+0x6f/0xa0 [ 135.284562] ext4_mpage_readpages+0x3d6/0x770 [ 135.285646] read_pages+0x67/0x1d0 [ 135.286492] ? folio_add_lru+0x51/0x80 [ 135.287441] page_cache_ra_unbounded+0x124/0x170 [ 135.288510] filemap_get_pages+0x23d/0x5a0 [ 135.289457] ? path_openat+0xa72/0xdd0 [ 135.290332] filemap_read+0xbf/0x300 [ 135.291158] ? _raw_spin_lock_irqsave+0x17/0x40 [ 135.292192] new_sync_read+0x103/0x170 [ 135.293014] vfs_read+0x15d/0x180 [ 135.293745] ksys_read+0xa1/0xe0 [ 135.294461] do_syscall_64+0x3c/0x80 [ 135.295284] entry_SYSCALL_64_after_hwframe+0x46/0xb0
This patch simply adds an extra check in __ext4_ext_check(), verifying that eh_entries is not 0 when eh_depth is > 0.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215941 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216283 Cc: Baokun Li libaokun1@huawei.com Cc: stable@kernel.org Signed-off-by: Luís Henriques lhenriques@suse.de Reviewed-by: Jan Kara jack@suse.cz Reviewed-by: Baokun Li libaokun1@huawei.com Link: https://lore.kernel.org/r/20220822094235.2690-1-lhenriques@suse.de Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Baokun Li libaokun1@huawei.com Reviewed-by: Zhang Yi yi.zhang@huawei.com Signed-off-by: Yongqiang Liu liuyongqiang13@huawei.com --- fs/ext4/extents.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 578769f10906..6edab0ef28fd 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -508,6 +508,10 @@ static int __ext4_ext_check(const char *function, unsigned int line, error_msg = "invalid eh_entries"; goto corrupted; } + if (unlikely((eh->eh_entries == 0) && (depth > 0))) { + error_msg = "eh_entries is 0 but eh_depth is > 0"; + goto corrupted; + } if (!ext4_valid_extent_entries(inode, eh, lblk, &pblk, depth)) { error_msg = "invalid extent entries"; goto corrupted;
From: Xingui Yang yangxingui@huawei.com
driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I62ZXO CVE: NA
------------------------------------------------
During the write I/O, when the SAS PHY switch is tested, the hardware may reports two CQs for one IO. the first cq indicates invalid port when DPH scheduling, the second cq indicates that response frame has been written to the memory but the I/O is ended abnormally due to I/O data underload. So set iptt aborted flag when receiving an abnormal CQ, then the host will discards the IPTT frame received from the SAS hard disk.
Signed-off-by: Xingui Yang yangxingui@huawei.com Reviewed-by: kang fenglong kangfenglong@huawei.com Signed-off-by: Yongqiang Liu liuyongqiang13@huawei.com --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 470be06525d9..77f451040c4c 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -2265,6 +2265,23 @@ static bool is_ncq_err(struct hisi_sas_complete_v3_hdr *complete_hdr) (dw3 & FIS_ATA_STATUS_ERR); }
+static void set_aborted_iptt(struct hisi_hba *hisi_hba, + struct hisi_sas_slot *slot) +{ + u32 cfg_abt_set_query_iptt = hisi_sas_read32(hisi_hba, + CFG_ABT_SET_QUERY_IPTT); + cfg_abt_set_query_iptt &= ~CFG_SET_ABORTED_IPTT_MSK; + cfg_abt_set_query_iptt |= (1 << CFG_SET_ABORTED_EN_OFF) | + (slot->idx << CFG_SET_ABORTED_IPTT_OFF); + hisi_sas_write32(hisi_hba, CFG_ABT_SET_QUERY_IPTT, + cfg_abt_set_query_iptt); + cfg_abt_set_query_iptt &= ~(1 << CFG_SET_ABORTED_EN_OFF); + hisi_sas_write32(hisi_hba, CFG_ABT_SET_QUERY_IPTT, + cfg_abt_set_query_iptt); + hisi_sas_write32(hisi_hba, CFG_ABT_SET_IPTT_DONE, + 1 << CFG_ABT_SET_IPTT_DONE_OFF); +} + static void slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task, struct hisi_sas_slot *slot) @@ -2420,6 +2437,7 @@ slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) u32 device_id = (complete_hdr->dw1 & 0xffff0000) >> 16; struct hisi_sas_itct *itct = &hisi_hba->itct[device_id];
+ set_aborted_iptt(hisi_hba, slot); slot_err_v3_hw(hisi_hba, task, slot); dev_info(dev, "erroneous completion iptt=%d task=%pK dev id=%d sas_addr=0x%llx " "CQ hdr: 0x%x 0x%x 0x%x 0x%x "