From: Yanteng Si siyanteng@loongson.cn

maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I9RPAR

Reference: https://lore.kernel.org/all/cover.1714046812.git.siyanteng@loongson.cn

--------------------------------

Alternate Descriptor Size (ATDS) is a part of the DMA-configs together with the PBL, ALL, AEME, etc so the structure is the most suitable place for it.

Signed-off-by: Feiyang Chen chenfeiyang@loongson.cn Signed-off-by: Yinggang Gu guyinggang@loongson.cn Signed-off-by: Yanteng Si siyanteng@loongson.cn Reviewed-by: Serge Semin fancer.lancer@gmail.com Signed-off-by: Ming Wang wangming01@loongson.cn --- drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 +- drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 4 ++-- drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c | 2 +- drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 2 +- drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 2 +- drivers/net/ethernet/stmicro/stmmac/hwif.h | 3 +-- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 ++--- include/linux/stmmac.h | 1 + 8 files changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c index 63998d65fef8..031a83678c71 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c @@ -299,7 +299,7 @@ static int sun8i_dwmac_dma_reset(void __iomem *ioaddr) * Called from stmmac via stmmac_dma_ops->init */ static void sun8i_dwmac_dma_init(void __iomem *ioaddr, - struct stmmac_dma_cfg *dma_cfg, int atds) + struct stmmac_dma_cfg *dma_cfg) { writel(EMAC_RX_INT | EMAC_TX_INT, ioaddr + EMAC_INT_EN); writel(0x1FFFFFF, ioaddr + EMAC_INT_STA); diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c index daf79cdbd3ec..bb82ee9b855f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c @@ -71,7 +71,7 @@ static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi) }

static void dwmac1000_dma_init(void __iomem *ioaddr, - struct stmmac_dma_cfg *dma_cfg, int atds) + struct stmmac_dma_cfg *dma_cfg) { u32 value = readl(ioaddr + DMA_BUS_MODE); int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl; @@ -98,7 +98,7 @@ static void dwmac1000_dma_init(void __iomem *ioaddr, if (dma_cfg->mixed_burst) value |= DMA_BUS_MODE_MB;

- if (atds) + if (dma_cfg->atds) value |= DMA_BUS_MODE_ATDS;

if (dma_cfg->aal) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c index dea270f60cc3..f861babc06f9 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c @@ -19,7 +19,7 @@ #include "dwmac_dma.h"

static void dwmac100_dma_init(void __iomem *ioaddr, - struct stmmac_dma_cfg *dma_cfg, int atds) + struct stmmac_dma_cfg *dma_cfg) { /* Enable Application Access by writing to DMA CSR0 */ writel(DMA_BUS_MODE_DEFAULT | (dma_cfg->pbl << DMA_BUS_MODE_PBL_SHIFT), diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c index 84d3a8551b03..e0165358c4ac 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c @@ -153,7 +153,7 @@ static void dwmac410_dma_init_channel(struct stmmac_priv *priv, }

static void dwmac4_dma_init(void __iomem *ioaddr, - struct stmmac_dma_cfg *dma_cfg, int atds) + struct stmmac_dma_cfg *dma_cfg) { u32 value = readl(ioaddr + DMA_SYS_BUS_MODE);

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c index dd2ab6185c40..7840bc403788 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c @@ -20,7 +20,7 @@ static int dwxgmac2_dma_reset(void __iomem *ioaddr) }

static void dwxgmac2_dma_init(void __iomem *ioaddr, - struct stmmac_dma_cfg *dma_cfg, int atds) + struct stmmac_dma_cfg *dma_cfg) { u32 value = readl(ioaddr + XGMAC_DMA_SYSBUS_MODE);

diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h index 78cdcd8d5e33..7d55b57a972a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h @@ -167,8 +167,7 @@ struct dma_features; struct stmmac_dma_ops { /* DMA core initialization */ int (*reset)(void __iomem *ioaddr); - void (*init)(void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg, - int atds); + void (*init)(void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg); void (*init_chan)(struct stmmac_priv *priv, void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg, u32 chan); void (*init_rx_chan)(struct stmmac_priv *priv, void __iomem *ioaddr, diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 99c39d14ad5b..9ce91a0250f9 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2944,7 +2944,6 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) struct stmmac_rx_queue *rx_q; struct stmmac_tx_queue *tx_q; u32 chan = 0; - int atds = 0; int ret = 0;

if (!priv->plat->dma_cfg || !priv->plat->dma_cfg->pbl) { @@ -2953,7 +2952,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) }

if (priv->extend_desc && (priv->mode == STMMAC_RING_MODE)) - atds = 1; + priv->plat->dma_cfg->atds = 1;

ret = stmmac_reset(priv, priv->ioaddr); if (ret) { @@ -2962,7 +2961,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) }

/* DMA Configuration */ - stmmac_dma_init(priv, priv->ioaddr, priv->plat->dma_cfg, atds); + stmmac_dma_init(priv, priv->ioaddr, priv->plat->dma_cfg);

if (priv->plat->axi) stmmac_axi(priv, priv->ioaddr, priv->plat->axi); diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 5acb77968902..56f739340273 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -100,6 +100,7 @@ struct stmmac_dma_cfg { bool eame; bool multi_msi_en; bool dche; + bool atds; };

#define AXI_BLEN 7

From: Yanteng Si siyanteng@loongson.cn

maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I9RPAR

Reference: https://lore.kernel.org/all/cover.1714046812.git.siyanteng@loongson.cn

--------------------------------

The loongson gnet will call it in the future.

Signed-off-by: Feiyang Chen chenfeiyang@loongson.cn Signed-off-by: Yinggang Gu guyinggang@loongson.cn Signed-off-by: Yanteng Si siyanteng@loongson.cn Reviewed-by: Serge Semin fancer.lancer@gmail.com Signed-off-by: Ming Wang wangming01@loongson.cn --- drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c index f161ec9ac490..66c0c22908b1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c @@ -296,3 +296,4 @@ const struct stmmac_dma_ops dwmac1000_dma_ops = { .get_hw_feature = dwmac1000_get_hw_feature, .rx_watchdog = dwmac1000_rx_watchdog, }; +EXPORT_SYMBOL_GPL(dwmac1000_dma_ops);

From: Yanteng Si siyanteng@loongson.cn

maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I9RPAR

Reference: https://lore.kernel.org/all/cover.1714046812.git.siyanteng@loongson.cn

--------------------------------

Just use PCI_DEVICE_DATA() macro for device identification, No changes to function functionality.

Signed-off-by: Feiyang Chen chenfeiyang@loongson.cn Signed-off-by: Yinggang Gu guyinggang@loongson.cn Signed-off-by: Yanteng Si siyanteng@loongson.cn Reviewed-by: Serge Semin fancer.lancer@gmail.com Signed-off-by: Ming Wang wangming01@loongson.cn --- drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c index 19906ea67636..4e0838db4259 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c @@ -9,6 +9,8 @@ #include <linux/of_irq.h> #include "stmmac.h"

+#define PCI_DEVICE_ID_LOONGSON_GMAC 0x7a03 + static int loongson_default_data(struct plat_stmmacenet_data *plat) { plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */ @@ -210,7 +212,7 @@ static SIMPLE_DEV_PM_OPS(loongson_dwmac_pm_ops, loongson_dwmac_suspend, loongson_dwmac_resume);

static const struct pci_device_id loongson_dwmac_id_table[] = { - { PCI_VDEVICE(LOONGSON, 0x7a03) }, + { PCI_DEVICE_DATA(LOONGSON, GMAC, NULL) }, {} }; MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table);

From: Yanteng Si siyanteng@loongson.cn

maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I9RPAR

Reference: https://lore.kernel.org/all/cover.1714046812.git.siyanteng@loongson.cn

--------------------------------

The ref/ptp clock of gmac(amd gnet) is 125000000.

Signed-off-by: Feiyang Chen chenfeiyang@loongson.cn Signed-off-by: Yinggang Gu guyinggang@loongson.cn Signed-off-by: Yanteng Si siyanteng@loongson.cn Signed-off-by: Ming Wang wangming01@loongson.cn --- drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c index 904e288d0be0..9f208f84c1e7 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c @@ -32,6 +32,9 @@ static void loongson_default_data(struct plat_stmmacenet_data *plat) /* Disable RX queues routing by default */ plat->rx_queues_cfg[0].pkt_route = 0x0;

+ plat->clk_ref_rate = 125000000; + plat->clk_ptp_rate = 125000000; + /* Default to phy auto-detection */ plat->phy_addr = -1;

From: Yanteng Si siyanteng@loongson.cn

maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I9RPAR

Reference: https://lore.kernel.org/all/cover.1714046812.git.siyanteng@loongson.cn

--------------------------------

The mac_interface of gmac is PHY_INTERFACE_MODE_RGMII_ID.

Signed-off-by: Feiyang Chen chenfeiyang@loongson.cn Signed-off-by: Yinggang Gu guyinggang@loongson.cn Signed-off-by: Yanteng Si siyanteng@loongson.cn Signed-off-by: Ming Wang wangming01@loongson.cn --- drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c index f7618edf4a3a..e989cb835340 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c @@ -49,6 +49,7 @@ static int loongson_gmac_data(struct plat_stmmacenet_data *plat) loongson_default_data(plat);

plat->mdio_bus_data->phy_mask = 0; + plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID;

return 0; }

From: Yanteng Si siyanteng@loongson.cn

maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I9RPAR

Reference: https://lore.kernel.org/all/cover.1714046812.git.siyanteng@loongson.cn

--------------------------------

Move res._irq to loongson_dwmac_config_legacy(). No function changes.

Signed-off-by: Feiyang Chen chenfeiyang@loongson.cn Signed-off-by: Yinggang Gu guyinggang@loongson.cn Signed-off-by: Yanteng Si siyanteng@loongson.cn Signed-off-by: Ming Wang wangming01@loongson.cn --- .../ethernet/stmicro/stmmac/dwmac-loongson.c | 56 +++++++++++-------- 1 file changed, 34 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c index 1022bceaa680..df5899bec91a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c @@ -68,6 +68,38 @@ static struct stmmac_pci_info loongson_gmac_pci_info = { .setup = loongson_gmac_data, };

+static int loongson_dwmac_config_legacy(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat, + struct stmmac_resources *res, + struct device_node *np) +{ + if (np) { + res->irq = of_irq_get_byname(np, "macirq"); + if (res->irq < 0) { + dev_err(&pdev->dev, "IRQ macirq not found\n"); + return -ENODEV; + } + + res->wol_irq = of_irq_get_byname(np, "eth_wake_irq"); + if (res->wol_irq < 0) { + dev_info(&pdev->dev, + "IRQ eth_wake_irq not found, using macirq\n"); + res->wol_irq = res->irq; + } + + res->lpi_irq = of_irq_get_byname(np, "eth_lpi"); + if (res->lpi_irq < 0) { + dev_err(&pdev->dev, "IRQ eth_lpi not found\n"); + return -ENODEV; + } + } else { + res->irq = pdev->irq; + res->wol_irq = res->irq; + } + + return 0; +} + static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct plat_stmmacenet_data *plat; @@ -136,28 +168,6 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id goto err_disable_device; } plat->phy_interface = phy_mode; - - res.irq = of_irq_get_byname(np, "macirq"); - if (res.irq < 0) { - dev_err(&pdev->dev, "IRQ macirq not found\n"); - ret = -ENODEV; - goto err_disable_msi; - } - - res.wol_irq = of_irq_get_byname(np, "eth_wake_irq"); - if (res.wol_irq < 0) { - dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n"); - res.wol_irq = res.irq; - } - - res.lpi_irq = of_irq_get_byname(np, "eth_lpi"); - if (res.lpi_irq < 0) { - dev_err(&pdev->dev, "IRQ eth_lpi not found\n"); - ret = -ENODEV; - goto err_disable_msi; - } - } else { - res.irq = pdev->irq; }

pci_enable_msi(pdev); @@ -167,6 +177,8 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id plat->tx_queues_to_use = 1; plat->rx_queues_to_use = 1;

+ ret = loongson_dwmac_config_legacy(pdev, plat, &res, np); + ret = stmmac_dvr_probe(&pdev->dev, plat, &res); if (ret) goto err_disable_msi;

From: Yanteng Si siyanteng@loongson.cn

maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I9RPAR

Reference: https://lore.kernel.org/all/cover.1714046812.git.siyanteng@loongson.cn

--------------------------------

There are two types of Loongson DWGMAC. The first type shares the same register definitions and has similar logic as dwmac1000. The second type uses several different register definitions, we think it is necessary to distinguish rx and tx, so we split these bits into two.

Simply put, we split some single bit fields into double bits fileds:

Name Tx Rx

DMA_INTR_ENA_NIE = 0x00040000 | 0x00020000; DMA_INTR_ENA_AIE = 0x00010000 | 0x00008000; DMA_STATUS_NIS = 0x00040000 | 0x00020000; DMA_STATUS_AIS = 0x00010000 | 0x00008000; DMA_STATUS_FBI = 0x00002000 | 0x00001000;

Therefore, when using, TX and RX must be set at the same time.

How to use them: 1. Create the Loongson GNET-specific stmmac_dma_ops.dma_interrupt() stmmac_dma_ops.init_chan() methods in the dwmac-loongson.c driver. Adding all the Loongson-specific macros

2. Create a Loongson GNET-specific platform setup method with the next semantics: + allocate stmmac_dma_ops instance and initialize it with dwmac1000_dma_ops. + override the stmmac_dma_ops.{dma_interrupt, init_chan} with the pointers to the methods defined in 2. + allocate mac_device_info instance and initialize the mac_device_info.dma field with a pointer to the new stmmac_dma_ops instance. + initialize mac_device_info in a way it's done in dwmac1000_setup().

3. Initialize plat_stmmacenet_data.setup() with the pointer to the method created in 2.

GNET features:

Speeds: 10/100/1000Mbps DMA-descriptors type: enhanced L3/L4 filters availability: support VLAN hash table filter: support PHY-interface: GMII Remote Wake-up support: support Mac Management Counters (MMC): support Number of additional MAC addresses: 5 MAC Hash-based filter: support Number of ash table size: 256 DMA chennel number: 0x10 device is 8 and 0x37 device is 1

Others:

GNET integrates both MAC and PHY chips inside. GNET device: LS2K2000, LS7A2000, the chip connection between the mac and phy of these devices is not normal and requires two rounds of negotiation; LS7A2000 does not support half-duplex and multi-channel;

To enable multi-channel on LS2K2000, you need to turn off hardware checksum.

**Note**: Currently, only the LS2K2000's synopsys_id is 0x10, while the synopsys_id of other devices are 0x37.

Signed-off-by: Feiyang Chen chenfeiyang@loongson.cn Signed-off-by: Yinggang Gu guyinggang@loongson.cn Signed-off-by: Yanteng Si siyanteng@loongson.cn Signed-off-by: Ming Wang wangming01@loongson.cn --- drivers/net/ethernet/stmicro/stmmac/common.h | 1 + .../ethernet/stmicro/stmmac/dwmac-loongson.c | 380 +++++++++++++++++- 2 files changed, 370 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index 4dbc076f72d6..f9a3f3321e59 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -29,6 +29,7 @@ /* Synopsys Core versions */ #define DWMAC_CORE_3_40 0x34 #define DWMAC_CORE_3_50 0x35 +#define DWMAC_CORE_3_70 0x37 #define DWMAC_CORE_4_00 0x40 #define DWMAC_CORE_4_10 0x41 #define DWMAC_CORE_5_00 0x50 diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c index a16bba389417..f90e7d6b1ac3 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c @@ -8,9 +8,71 @@ #include <linux/device.h> #include <linux/of_irq.h> #include "stmmac.h" +#include "dwmac_dma.h" +#include "dwmac1000.h" + +/* Normal Loongson Tx Summary */ +#define DMA_INTR_ENA_NIE_TX_LOONGSON 0x00040000 +/* Normal Loongson Rx Summary */ +#define DMA_INTR_ENA_NIE_RX_LOONGSON 0x00020000 + +#define DMA_INTR_NORMAL_LOONGSON (DMA_INTR_ENA_NIE_TX_LOONGSON | \ + DMA_INTR_ENA_NIE_RX_LOONGSON | \ + DMA_INTR_ENA_RIE | DMA_INTR_ENA_TIE) + +/* Abnormal Loongson Tx Summary */ +#define DMA_INTR_ENA_AIE_TX_LOONGSON 0x00010000 +/* Abnormal Loongson Rx Summary */ +#define DMA_INTR_ENA_AIE_RX_LOONGSON 0x00008000 + +#define DMA_INTR_ABNORMAL_LOONGSON (DMA_INTR_ENA_AIE_TX_LOONGSON | \ + DMA_INTR_ENA_AIE_RX_LOONGSON | \ + DMA_INTR_ENA_FBE | DMA_INTR_ENA_UNE) + +#define DMA_INTR_DEFAULT_MASK_LOONGSON (DMA_INTR_NORMAL_LOONGSON | \ + DMA_INTR_ABNORMAL_LOONGSON) + +/* Normal Loongson Tx Interrupt Summary */ +#define DMA_STATUS_NIS_TX_LOONGSON 0x00040000 +/* Normal Loongson Rx Interrupt Summary */ +#define DMA_STATUS_NIS_RX_LOONGSON 0x00020000 + +/* Abnormal Loongson Tx Interrupt Summary */ +#define DMA_STATUS_AIS_TX_LOONGSON 0x00010000 +/* Abnormal Loongson Rx Interrupt Summary */ +#define DMA_STATUS_AIS_RX_LOONGSON 0x00008000 + +/* Fatal Loongson Tx Bus Error Interrupt */ +#define DMA_STATUS_FBI_TX_LOONGSON 0x00002000 +/* Fatal Loongson Rx Bus Error Interrupt */ +#define DMA_STATUS_FBI_RX_LOONGSON 0x00001000 + +#define DMA_STATUS_MSK_COMMON_LOONGSON (DMA_STATUS_NIS_TX_LOONGSON | \ + DMA_STATUS_NIS_RX_LOONGSON | \ + DMA_STATUS_AIS_TX_LOONGSON | \ + DMA_STATUS_AIS_RX_LOONGSON | \ + DMA_STATUS_FBI_TX_LOONGSON | \ + DMA_STATUS_FBI_RX_LOONGSON) + +#define DMA_STATUS_MSK_RX_LOONGSON (DMA_STATUS_ERI | DMA_STATUS_RWT | \ + DMA_STATUS_RPS | DMA_STATUS_RU | \ + DMA_STATUS_RI | DMA_STATUS_OVF | \ + DMA_STATUS_MSK_COMMON_LOONGSON) + +#define DMA_STATUS_MSK_TX_LOONGSON (DMA_STATUS_ETI | DMA_STATUS_UNF | \ + DMA_STATUS_TJT | DMA_STATUS_TU | \ + DMA_STATUS_TPS | DMA_STATUS_TI | \ + DMA_STATUS_MSK_COMMON_LOONGSON)

#define PCI_DEVICE_ID_LOONGSON_GMAC 0x7a03 #define PCI_DEVICE_ID_LOONGSON_GNET 0x7a13 +#define LOONGSON_DWMAC_CORE_1_00 0x10 /* Loongson custom IP */ +#define CHANNEL_NUM 8 + +struct loongson_data { + u32 gmac_verion; + struct device *dev; +};

struct stmmac_pci_info { int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat); @@ -69,6 +131,168 @@ static struct stmmac_pci_info loongson_gmac_pci_info = { .setup = loongson_gmac_data, };

+static void loongson_gnet_dma_init_channel(struct stmmac_priv *priv, + void __iomem *ioaddr, + struct stmmac_dma_cfg *dma_cfg, + u32 chan) +{ + int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl; + int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl; + u32 value; + + value = readl(ioaddr + DMA_CHAN_BUS_MODE(chan)); + + if (dma_cfg->pblx8) + value |= DMA_BUS_MODE_MAXPBL; + + value |= DMA_BUS_MODE_USP; + value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK); + value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT); + value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT); + + /* Set the Fixed burst mode */ + if (dma_cfg->fixed_burst) + value |= DMA_BUS_MODE_FB; + + /* Mixed Burst has no effect when fb is set */ + if (dma_cfg->mixed_burst) + value |= DMA_BUS_MODE_MB; + + if (dma_cfg->atds) + value |= DMA_BUS_MODE_ATDS; + + if (dma_cfg->aal) + value |= DMA_BUS_MODE_AAL; + + writel(value, ioaddr + DMA_CHAN_BUS_MODE(chan)); + + /* Mask interrupts by writing to CSR7 */ + writel(DMA_INTR_DEFAULT_MASK_LOONGSON, ioaddr + + DMA_CHAN_INTR_ENA(chan)); +} + +static int loongson_gnet_dma_interrupt(struct stmmac_priv *priv, + void __iomem *ioaddr, + struct stmmac_extra_stats *x, + u32 chan, u32 dir) +{ + struct stmmac_pcpu_stats *stats = this_cpu_ptr(priv->xstats.pcpu_stats); + u32 abnor_intr_status; + u32 nor_intr_status; + u32 fb_intr_status; + u32 intr_status; + int ret = 0; + + /* read the status register (CSR5) */ + intr_status = readl(ioaddr + DMA_CHAN_STATUS(chan)); + + if (dir == DMA_DIR_RX) + intr_status &= DMA_STATUS_MSK_RX_LOONGSON; + else if (dir == DMA_DIR_TX) + intr_status &= DMA_STATUS_MSK_TX_LOONGSON; + + nor_intr_status = intr_status & (DMA_STATUS_NIS_TX_LOONGSON | + DMA_STATUS_NIS_RX_LOONGSON); + abnor_intr_status = intr_status & (DMA_STATUS_AIS_TX_LOONGSON | + DMA_STATUS_AIS_RX_LOONGSON); + fb_intr_status = intr_status & (DMA_STATUS_FBI_TX_LOONGSON | + DMA_STATUS_FBI_RX_LOONGSON); + + /* ABNORMAL interrupts */ + if (unlikely(abnor_intr_status)) { + if (unlikely(intr_status & DMA_STATUS_UNF)) { + ret = tx_hard_error_bump_tc; + x->tx_undeflow_irq++; + } + if (unlikely(intr_status & DMA_STATUS_TJT)) + x->tx_jabber_irq++; + if (unlikely(intr_status & DMA_STATUS_OVF)) + x->rx_overflow_irq++; + if (unlikely(intr_status & DMA_STATUS_RU)) + x->rx_buf_unav_irq++; + if (unlikely(intr_status & DMA_STATUS_RPS)) + x->rx_process_stopped_irq++; + if (unlikely(intr_status & DMA_STATUS_RWT)) + x->rx_watchdog_irq++; + if (unlikely(intr_status & DMA_STATUS_ETI)) + x->tx_early_irq++; + if (unlikely(intr_status & DMA_STATUS_TPS)) { + x->tx_process_stopped_irq++; + ret = tx_hard_error; + } + if (unlikely(fb_intr_status)) { + x->fatal_bus_error_irq++; + ret = tx_hard_error; + } + } + /* TX/RX NORMAL interrupts */ + if (likely(nor_intr_status)) { + if (likely(intr_status & DMA_STATUS_RI)) { + u32 value = readl(ioaddr + DMA_INTR_ENA); + /* to schedule NAPI on real RIE event. */ + if (likely(value & DMA_INTR_ENA_RIE)) { + u64_stats_update_begin(&stats->syncp); + u64_stats_inc(&stats->rx_normal_irq_n[chan]); + u64_stats_update_end(&stats->syncp); + ret |= handle_rx; + } + } + if (likely(intr_status & DMA_STATUS_TI)) { + u64_stats_update_begin(&stats->syncp); + u64_stats_inc(&stats->tx_normal_irq_n[chan]); + u64_stats_update_end(&stats->syncp); + ret |= handle_tx; + } + if (unlikely(intr_status & DMA_STATUS_ERI)) + x->rx_early_irq++; + } + /* Optional hardware blocks, interrupts should be disabled */ + if (unlikely(intr_status & + (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI))) + pr_warn("%s: unexpected status %08x\n", __func__, intr_status); + + /* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */ + writel((intr_status & 0x7ffff), ioaddr + DMA_CHAN_STATUS(chan)); + + return ret; +} + +static void loongson_gnet_fix_speed(void *priv, unsigned int speed, + unsigned int mode) +{ + struct loongson_data *ld = (struct loongson_data *)priv; + struct net_device *ndev = dev_get_drvdata(ld->dev); + struct stmmac_priv *ptr = netdev_priv(ndev); + + /* The controller and PHY don't work well together. + * We need to use the PS bit to check if the controller's status + * is correct and reset PHY if necessary. + * MAC_CTRL_REG.15 is defined by the GMAC_CONTROL_PS macro. + */ + if (speed == SPEED_1000) { + if (readl(ptr->ioaddr + MAC_CTRL_REG) & + GMAC_CONTROL_PS) + /* Word around hardware bug, restart autoneg */ + phy_restart_aneg(ndev->phydev); + } +} + +static int loongson_gnet_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + loongson_default_data(pdev, plat); + + plat->phy_interface = PHY_INTERFACE_MODE_GMII; + plat->mdio_bus_data->phy_mask = ~(u32)BIT(2); + plat->fix_mac_speed = loongson_gnet_fix_speed; + + return 0; +} + +static struct stmmac_pci_info loongson_gnet_pci_info = { + .setup = loongson_gnet_data, +}; + static int loongson_dwmac_config_legacy(struct pci_dev *pdev, struct plat_stmmacenet_data *plat, struct stmmac_resources *res, @@ -101,12 +325,125 @@ static int loongson_dwmac_config_legacy(struct pci_dev *pdev, return 0; }

+static int loongson_dwmac_config_msi(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat, + struct stmmac_resources *res, + struct device_node *np) +{ + int i, ret, vecs; + + vecs = roundup_pow_of_two(CHANNEL_NUM * 2 + 1); + ret = pci_alloc_irq_vectors(pdev, vecs, vecs, PCI_IRQ_MSI); + if (ret < 0) { + dev_info(&pdev->dev, + "MSI enable failed, Fallback to legacy interrupt\n"); + return loongson_dwmac_config_legacy(pdev, plat, res, np); + } + + res->irq = pci_irq_vector(pdev, 0); + res->wol_irq = 0; + + /* INT NAME | MAC | CH7 rx | CH7 tx | ... | CH0 rx | CH0 tx | + * --------- ----- -------- -------- ... -------- -------- + * IRQ NUM | 0 | 1 | 2 | ... | 15 | 16 | + */ + for (i = 0; i < CHANNEL_NUM; i++) { + res->rx_irq[CHANNEL_NUM - 1 - i] = + pci_irq_vector(pdev, 1 + i * 2); + res->tx_irq[CHANNEL_NUM - 1 - i] = + pci_irq_vector(pdev, 2 + i * 2); + } + + plat->flags |= STMMAC_FLAG_MULTI_MSI_EN; + + return 0; +} + +static struct mac_device_info *loongson_dwmac_setup(void *apriv) +{ + struct stmmac_priv *priv = apriv; + struct mac_device_info *mac; + struct stmmac_dma_ops *dma; + struct loongson_data *ld; + struct pci_dev *pdev; + + ld = priv->plat->bsp_priv; + pdev = to_pci_dev(priv->device); + + mac = devm_kzalloc(priv->device, sizeof(*mac), GFP_KERNEL); + if (!mac) + return NULL; + + dma = devm_kzalloc(priv->device, sizeof(*dma), GFP_KERNEL); + if (!dma) + return NULL; + + /* The original IP-core version is 0x37 in all Loongson GNET + * (ls2k2000 and ls7a2000), but the GNET HW designers have changed the + * GMAC_VERSION.SNPSVER field to the custom 0x10 value on the Loongson + * ls2k2000 MAC to emphasize the differences: multiple DMA-channels, + * AV feature and GMAC_INT_STATUS CSR flags layout. Get back the + * original value so the correct HW-interface would be selected. + */ + if (ld->gmac_verion == LOONGSON_DWMAC_CORE_1_00) { + priv->synopsys_id = DWMAC_CORE_3_70; + *dma = dwmac1000_dma_ops; + dma->init_chan = loongson_gnet_dma_init_channel; + dma->dma_interrupt = loongson_gnet_dma_interrupt; + mac->dma = dma; + } + + priv->dev->priv_flags |= IFF_UNICAST_FLT; + + /* Pre-initialize the respective "mac" fields as it's done in + * dwmac1000_setup() + */ + mac->pcsr = priv->ioaddr; + mac->multicast_filter_bins = priv->plat->multicast_filter_bins; + mac->unicast_filter_entries = priv->plat->unicast_filter_entries; + mac->mcast_bits_log2 = 0; + + if (mac->multicast_filter_bins) + mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins); + + /* The GMAC devices with PCI ID 0x7a03 does not support any pause mode. + * The GNET devices without CORE ID 0x10 does not support half-duplex. + */ + if (pdev->device == PCI_DEVICE_ID_LOONGSON_GMAC) { + mac->link.caps = MAC_10 | MAC_100 | MAC_1000; + } else { + if (ld->gmac_verion == LOONGSON_DWMAC_CORE_1_00) + mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000; + else + mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10FD | MAC_100FD | MAC_1000FD; + } + + mac->link.duplex = GMAC_CONTROL_DM; + mac->link.speed10 = GMAC_CONTROL_PS; + mac->link.speed100 = GMAC_CONTROL_PS | GMAC_CONTROL_FES; + mac->link.speed1000 = 0; + mac->link.speed_mask = GMAC_CONTROL_PS | GMAC_CONTROL_FES; + mac->mii.addr = GMAC_MII_ADDR; + mac->mii.data = GMAC_MII_DATA; + mac->mii.addr_shift = 11; + mac->mii.addr_mask = 0x0000F800; + mac->mii.reg_shift = 6; + mac->mii.reg_mask = 0x000007C0; + mac->mii.clk_csr_shift = 2; + mac->mii.clk_csr_mask = GENMASK(5, 2); + + return mac; +} + static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct plat_stmmacenet_data *plat; int ret, i, bus_id, phy_mode; struct stmmac_pci_info *info; struct stmmac_resources res; + struct loongson_data *ld; struct device_node *np;

np = dev_of_node(&pdev->dev); @@ -122,10 +459,12 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id return -ENOMEM;

plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), GFP_KERNEL); - if (!plat->dma_cfg) { - ret = -ENOMEM; - goto err_put_node; - } + if (!plat->dma_cfg) + return -ENOMEM; + + ld = devm_kzalloc(&pdev->dev, sizeof(*ld), GFP_KERNEL); + if (!ld) + return -ENOMEM;

/* Enable pci device */ ret = pci_enable_device(pdev); @@ -171,14 +510,34 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id plat->phy_interface = phy_mode; }

- pci_enable_msi(pdev); + plat->bsp_priv = ld; + plat->setup = loongson_dwmac_setup; + ld->dev = &pdev->dev; + memset(&res, 0, sizeof(res)); res.addr = pcim_iomap_table(pdev)[0]; + ld->gmac_verion = readl(res.addr + GMAC_VERSION) & 0xff; + + switch (ld->gmac_verion) { + case LOONGSON_DWMAC_CORE_1_00: + plat->rx_queues_to_use = CHANNEL_NUM; + plat->tx_queues_to_use = CHANNEL_NUM; + + /* Only channel 0 supports checksum, + * so turn off checksum to enable multiple channels. + */ + for (i = 1; i < CHANNEL_NUM; i++) + plat->tx_queues_cfg[i].coe_unsupported = 1;

- plat->tx_queues_to_use = 1; - plat->rx_queues_to_use = 1; + ret = loongson_dwmac_config_msi(pdev, plat, &res, np); + break; + default: /* 0x35 device and 0x37 device. */ + plat->tx_queues_to_use = 1; + plat->rx_queues_to_use = 1;

- ret = loongson_dwmac_config_legacy(pdev, plat, &res, np); + ret = loongson_dwmac_config_legacy(pdev, plat, &res, np); + break; + }

/* GNET devices with dev revision 0x00 do not support manually * setting the speed to 1000. @@ -189,12 +548,10 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id

ret = stmmac_dvr_probe(&pdev->dev, plat, &res); if (ret) - goto err_disable_msi; + goto err_disable_device;

return ret;

-err_disable_msi: - pci_disable_msi(pdev); err_disable_device: pci_disable_device(pdev); err_put_node: @@ -262,6 +619,7 @@ static SIMPLE_DEV_PM_OPS(loongson_dwmac_pm_ops, loongson_dwmac_suspend,

static const struct pci_device_id loongson_dwmac_id_table[] = { { PCI_DEVICE_DATA(LOONGSON, GMAC, &loongson_gmac_pci_info) }, + { PCI_DEVICE_DATA(LOONGSON, GNET, &loongson_gnet_pci_info) }, {} }; MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table);

From: Yanteng Si siyanteng@loongson.cn

maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I9RPAR

Reference: https://lore.kernel.org/all/cover.1714046812.git.siyanteng@loongson.cn

--------------------------------

Add Yanteng Si as MODULE_AUTHOR of Loongson DWMAC PCI driver.

Signed-off-by: Feiyang Chen chenfeiyang@loongson.cn Signed-off-by: Yinggang Gu guyinggang@loongson.cn Signed-off-by: Yanteng Si siyanteng@loongson.cn Signed-off-by: Ming Wang wangming01@loongson.cn --- drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c index 35600a38b074..f03d78385ed9 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c @@ -637,4 +637,5 @@ module_pci_driver(loongson_dwmac_driver);

MODULE_DESCRIPTION("Loongson DWMAC PCI driver"); MODULE_AUTHOR("Qing Zhang zhangqing@loongson.cn"); +MODULE_AUTHOR("Yanteng Si siyanteng@loongson.cn"); MODULE_LICENSE("GPL v2");