New subject: [PATCH openEuler-1.0-LTS 2/2] x86/config: Enable netswift Giga NIC driver for x86

3 Dec 2021

From: zhenpengzheng zhenpengzheng@net-swift.com
driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4C4XW?from=project-issue
CVE: NA
------------------------------------------
This patch contains main code of Netswift Giga NIC Driver which supports devices as follows:
1) Netswift WX1860AL_W 8088:0100[VID:DID]
2) Netswift WX1860A2 8088:0101[VID:DID]
3) Netswift WX1860A2S 8088:0102[VID:DID]
4) Netswift WX1860A4 8088:0103[VID:DID]
5) Netswift WX1860A4S 8088:0104[VID:DID]
6) Netswift WX1860AL2 8088:0105[VID:DID]
7) Netswift WX1860AL2S 8088:0106[VID:DID]
8) Netswift WX1860AL4 8088:0107[VID:DID]
9) Netswift WX1860AL4S 8088:0108[VID:DID]
10)Netswift WX1860NCSI 8088:0109[VID:DID]
11)Netswift WX1860A1 8088:010a[VID:DID]
12)Netswift WX1860AL1 8088:010b[VID:DID]
Signed-off-by: zhenpengzheng zhenpengzheng@net-swift.com #openEuler_contributor
Signed-off-by: Zhen Lei thunder.leizhen@huawei.com
Signed-off-by: Laibin Qiu qiulaibin@huawei.com
Acked-by: Xie XiuQi xiexiuqi@huawei.com
Signed-off-by: Yang Yingliang yangyingliang@huawei.com
---
 drivers/net/ethernet/netswift/Kconfig         |   66 +
 drivers/net/ethernet/netswift/Makefile        |    1 +
 drivers/net/ethernet/netswift/ngbe/Makefile   |   16 +
 drivers/net/ethernet/netswift/ngbe/ngbe.h     | 1109 +++
 .../net/ethernet/netswift/ngbe/ngbe_debugfs.c |  764 ++
 .../net/ethernet/netswift/ngbe/ngbe_ethtool.c | 2756 +++++++
 drivers/net/ethernet/netswift/ngbe/ngbe_hw.c  | 5047 ++++++++++++
 drivers/net/ethernet/netswift/ngbe/ngbe_hw.h  |  280 +
 drivers/net/ethernet/netswift/ngbe/ngbe_lib.c |  701 ++
 .../net/ethernet/netswift/ngbe/ngbe_main.c    | 7119 +++++++++++++++++
 drivers/net/ethernet/netswift/ngbe/ngbe_mbx.c |  687 ++
 drivers/net/ethernet/netswift/ngbe/ngbe_mbx.h |  167 +
 .../net/ethernet/netswift/ngbe/ngbe_param.c   |  839 ++
 .../net/ethernet/netswift/ngbe/ngbe_pcierr.c  |  257 +
 .../net/ethernet/netswift/ngbe/ngbe_pcierr.h  |   23 +
 drivers/net/ethernet/netswift/ngbe/ngbe_phy.c | 1243 +++
 drivers/net/ethernet/netswift/ngbe/ngbe_phy.h |  201 +
 .../net/ethernet/netswift/ngbe/ngbe_procfs.c  |  908 +++
 drivers/net/ethernet/netswift/ngbe/ngbe_ptp.c |  858 ++
 .../net/ethernet/netswift/ngbe/ngbe_sriov.c   | 1461 ++++
 .../net/ethernet/netswift/ngbe/ngbe_sriov.h   |   63 +
 .../net/ethernet/netswift/ngbe/ngbe_sysfs.c   |  222 +
 .../net/ethernet/netswift/ngbe/ngbe_type.h    | 2941 +++++++
 23 files changed, 27729 insertions(+)
 create mode 100644 drivers/net/ethernet/netswift/ngbe/Makefile
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe.h
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_debugfs.c
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_ethtool.c
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_hw.c
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_hw.h
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_lib.c
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_main.c
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_mbx.c
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_mbx.h
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_param.c
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_pcierr.c
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_pcierr.h
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_phy.c
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_phy.h
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_procfs.c
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_ptp.c
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_sriov.c
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_sriov.h
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_sysfs.c
 create mode 100644 drivers/net/ethernet/netswift/ngbe/ngbe_type.h

diff --git a/drivers/net/ethernet/netswift/Kconfig b/drivers/net/ethernet/netswift/Kconfig
index c4b510b659ae9..58b0cfa917c63 100644
--- a/drivers/net/ethernet/netswift/Kconfig
+++ b/drivers/net/ethernet/netswift/Kconfig
@@ -17,4 +17,70 @@ if NET_VENDOR_NETSWIFT
source "drivers/net/ethernet/netswift/txgbe/Kconfig"
+config NGBE
+	tristate "Netswift PCI-Express Gigabit Ethernet support"
+	depends on PCI
+	imply PTP_1588_CLOCK
+	---help---
+	  This driver supports Netswift gigabit ethernet adapters.
+	  For more information on how to identify your adapter, go
+	  to http://www.net-swift.com
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ngbe.
+
+config NGBE_HWMON
+	bool "Netswift PCI-Express Gigabit adapters HWMON support"
+	default n
+	depends on NGBE && HWMON && !(NGBE=y && HWMON=m)
+	---help---
+	  Say Y if you want to expose thermal sensor data on these devices.
+
+	  If unsure, say N.
+
+config NGBE_PROCFS
+	bool "Netswift PCI-Express Gigabit adapters procfs support"
+	default n
+	depends on NGBE && !NGBE_SYSFS
+	---help---
+	  Say Y if you want to setup procfs for these devices.
+
+	  If unsure, say N.
+
+config NGBE_NO_LLI
+	bool "Netswift PCI-Express Gigabit adapters NO Low Latency Interrupt support"
+	default n
+	depends on NGBE
+	---help---
+	  Say N if you want to enable LLI for these devices.
+
+	  If unsure, say Y.
+
+config NGBE_DEBUG_FS
+	bool "Netswift PCI-Express Gigabit adapters debugfs support"
+	default n
+	depends on NGBE
+	---help---
+	  Say Y if you want to setup debugfs for these devices.
+
+	  If unsure, say N.
+
+config NGBE_POLL_LINK_STATUS
+	bool "Netswift PCI-Express Gigabit adapters poll mode support"
+	default n
+	depends on NGBE
+	---help---
+	  Say Y if you want to turn these devices to poll mode instead of interrupt-trigged TX/RX.
+
+	  If unsure, say N.
+
+config NGBE_SYSFS
+	bool "Netswift PCI-Express Gigabit adapters sysfs support"
+	default n
+	depends on NGBE
+	---help---
+	  Say Y if you want to setup sysfs for these devices.
+
+	  If unsure, say N.
+
 endif # NET_VENDOR_NETSWIFT
diff --git a/drivers/net/ethernet/netswift/Makefile b/drivers/net/ethernet/netswift/Makefile
index 0845d08600bee..5690b6392ce2f 100644
--- a/drivers/net/ethernet/netswift/Makefile
+++ b/drivers/net/ethernet/netswift/Makefile
@@ -4,3 +4,4 @@
 #
obj-$(CONFIG_TXGBE) += txgbe/
+obj-$(CONFIG_NGBE) += ngbe/
diff --git a/drivers/net/ethernet/netswift/ngbe/Makefile b/drivers/net/ethernet/netswift/ngbe/Makefile
new file mode 100644
index 0000000000000..dd6615eee4ede
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/Makefile
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+#
+# Makefile for the Netswift Gigabit PCI Express ethernet driver
+#
+
+obj-$(CONFIG_NGBE) += ngbe.o
+
+ngbe-objs := ngbe_main.o ngbe_ethtool.o \
+	     ngbe_hw.o ngbe_phy.o ngbe_sriov.o \
+	     ngbe_mbx.o ngbe_pcierr.o ngbe_param.o ngbe_lib.o ngbe_ptp.o
+
+ngbe-$(CONFIG_NGBE_HWMON) += ngbe_sysfs.o
+ngbe-$(CONFIG_NGBE_DEBUG_FS) += ngbe_debugfs.o
+ngbe-$(CONFIG_NGBE_PROCFS) += ngbe_procfs.o
+ngbe-$(CONFIG_NGBE_SYSFS) += ngbe_sysfs.o
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe.h b/drivers/net/ethernet/netswift/ngbe/ngbe.h
new file mode 100644
index 0000000000000..4e77777143a04
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe.h
@@ -0,0 +1,1109 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+
+#ifndef _NGBE_H_
+#define _NGBE_H_
+
+#include <net/ip.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/sctp.h>
+#include <linux/timecounter.h>
+#include <linux/clocksource.h>
+#include <linux/net_tstamp.h>
+#include <linux/ptp_clock_kernel.h>
+#include <linux/aer.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/if_ether.h>
+#include <linux/sched.h>
+
+#include "ngbe_type.h"
+
+/* Ether Types */
+#define NGBE_ETH_P_LLDP                        0x88CC
+#define NGBE_ETH_P_CNM                         0x22E7
+
+/* TX/RX descriptor defines */
+#define NGBE_DEFAULT_TXD               512 /* default ring size */
+#define NGBE_DEFAULT_TX_WORK           256
+#define NGBE_MAX_TXD                   8192
+#define NGBE_MIN_TXD                   128
+
+#define NGBE_DEFAULT_RXD               512 /* default ring size */
+#define NGBE_DEFAULT_RX_WORK           256
+#define NGBE_MAX_RXD                   8192
+#define NGBE_MIN_RXD                   128
+
+#define NGBE_ETH_P_LLDP                0x88CC
+
+/* flow control */
+#define NGBE_MIN_FCRTL                 0x40
+#define NGBE_MAX_FCRTL                 0x7FF80
+#define NGBE_MIN_FCRTH                 0x600
+#define NGBE_MAX_FCRTH                 0x7FFF0
+#define NGBE_DEFAULT_FCPAUSE   0xFFFF
+#define NGBE_MIN_FCPAUSE               0
+#define NGBE_MAX_FCPAUSE               0xFFFF
+
+/* Supported Rx Buffer Sizes */
+#define NGBE_RXBUFFER_256       256  /* Used for skb receive header */
+#define NGBE_RXBUFFER_2K       2048
+#define NGBE_RXBUFFER_3K       3072
+#define NGBE_RXBUFFER_4K       4096
+#define NGBE_MAX_RXBUFFER      16384  /* largest size for single descriptor */
+
+/*
+ * NOTE: netdev_alloc_skb reserves up to 64 bytes, NET_IP_ALIGN means we
+ * reserve 64 more, and skb_shared_info adds an additional 320 bytes more,
+ * this adds up to 448 bytes of extra data.
+ *
+ * Since netdev_alloc_skb now allocates a page fragment we can use a value
+ * of 256 and the resultant skb will have a truesize of 960 or less.
+ */
+#define NGBE_RX_HDR_SIZE       NGBE_RXBUFFER_256
+
+#define MAXIMUM_ETHERNET_VLAN_SIZE      (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)
+
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define NGBE_RX_BUFFER_WRITE   16      /* Must be power of 2 */
+
+#define NGBE_RX_DMA_ATTR \
+	(DMA_ATTR_SKIP_CPU_SYNC | DMA_ATTR_WEAK_ORDERING)
+
+enum ngbe_tx_flags {
+	/* cmd_type flags */
+	NGBE_TX_FLAGS_HW_VLAN  = 0x01,
+	NGBE_TX_FLAGS_TSO      = 0x02,
+	NGBE_TX_FLAGS_TSTAMP   = 0x04,
+
+	/* olinfo flags */
+	NGBE_TX_FLAGS_CC       = 0x08,
+	NGBE_TX_FLAGS_IPV4     = 0x10,
+	NGBE_TX_FLAGS_CSUM     = 0x20,
+	NGBE_TX_FLAGS_OUTER_IPV4 = 0x100,
+	NGBE_TX_FLAGS_LINKSEC	= 0x200,
+	NGBE_TX_FLAGS_IPSEC    = 0x400,
+
+	/* software defined flags */
+	NGBE_TX_FLAGS_SW_VLAN  = 0x40,
+	NGBE_TX_FLAGS_FCOE     = 0x80,
+};
+
+/* VLAN info */
+#define NGBE_TX_FLAGS_VLAN_MASK        0xffff0000
+#define NGBE_TX_FLAGS_VLAN_PRIO_MASK   0xe0000000
+#define NGBE_TX_FLAGS_VLAN_PRIO_SHIFT  29
+#define NGBE_TX_FLAGS_VLAN_SHIFT       16
+
+#define NGBE_MAX_RX_DESC_POLL          10
+
+#define NGBE_MAX_VF_MC_ENTRIES         30
+#define NGBE_MAX_VF_FUNCTIONS          8
+#define MAX_EMULATION_MAC_ADDRS         16
+#define NGBE_MAX_PF_MACVLANS           15
+#define NGBE_VF_DEVICE_ID		0x1000
+
+/* must account for pools assigned to VFs. */
+#ifdef CONFIG_PCI_IOV
+#define VMDQ_P(p)       ((p) + adapter->ring_feature[RING_F_VMDQ].offset)
+#else
+#define VMDQ_P(p)       (p)
+#endif
+
+#define UPDATE_VF_COUNTER_32bit(reg, last_counter, counter)     \
+	{                                                       \
+		u32 current_counter = rd32(hw, reg);  \
+		if (current_counter < last_counter)             \
+			counter += 0x100000000LL;               \
+		last_counter = current_counter;                 \
+		counter &= 0xFFFFFFFF00000000LL;                \
+		counter |= current_counter;                     \
+	}
+
+#define UPDATE_VF_COUNTER_36bit(reg_lsb, reg_msb, last_counter, counter) \
+	{                                                                \
+		u64 current_counter_lsb = rd32(hw, reg_lsb);   \
+		u64 current_counter_msb = rd32(hw, reg_msb);   \
+		u64 current_counter = (current_counter_msb << 32) |      \
+			current_counter_lsb;                             \
+		if (current_counter < last_counter)                      \
+			counter += 0x1000000000LL;                       \
+		last_counter = current_counter;                          \
+		counter &= 0xFFFFFFF000000000LL;                         \
+		counter |= current_counter;                              \
+	}
+
+struct vf_stats {
+	u64 gprc;
+	u64 gorc;
+	u64 gptc;
+	u64 gotc;
+	u64 mprc;
+};
+
+struct vf_data_storage {
+	struct pci_dev *vfdev;
+	u8 __iomem *b4_addr;
+	u32 b4_buf[16];
+	unsigned char vf_mac_addresses[ETH_ALEN];
+	u16 vf_mc_hashes[NGBE_MAX_VF_MC_ENTRIES];
+	u16 num_vf_mc_hashes;
+	u16 default_vf_vlan_id;
+	u16 vlans_enabled;
+	bool clear_to_send;
+	struct vf_stats vfstats;
+	struct vf_stats last_vfstats;
+	struct vf_stats saved_rst_vfstats;
+	bool pf_set_mac;
+	u16 pf_vlan; /* When set, guest VLAN config not allowed. */
+	u16 pf_qos;
+	u16 min_tx_rate;
+	u16 max_tx_rate;
+	u16 vlan_count;
+	u8 spoofchk_enabled;
+	u8 trusted;
+	int xcast_mode;
+	unsigned int vf_api;
+};
+
+struct vf_macvlans {
+	struct list_head l;
+	int vf;
+	bool free;
+	bool is_macvlan;
+	u8 vf_macvlan[ETH_ALEN];
+};
+
+#define NGBE_MAX_TXD_PWR       14
+#define NGBE_MAX_DATA_PER_TXD  (1 << NGBE_MAX_TXD_PWR)
+
+/* Tx Descriptors needed, worst case */
+#define TXD_USE_COUNT(S)        DIV_ROUND_UP((S), NGBE_MAX_DATA_PER_TXD)
+#ifndef MAX_SKB_FRAGS
+#define DESC_NEEDED     4
+#elif (MAX_SKB_FRAGS < 16)
+#define DESC_NEEDED     ((MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE)) + 4)
+#else
+#define DESC_NEEDED     (MAX_SKB_FRAGS + 4)
+#endif
+
+/* wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer */
+struct ngbe_tx_buffer {
+	union ngbe_tx_desc *next_to_watch;
+	unsigned long time_stamp;
+	struct sk_buff *skb;
+	unsigned int bytecount;
+	unsigned short gso_segs;
+	__be16 protocol;
+	DEFINE_DMA_UNMAP_ADDR(dma);
+	DEFINE_DMA_UNMAP_LEN(len);
+	u32 tx_flags;
+};
+
+struct ngbe_rx_buffer {
+	struct sk_buff *skb;
+	dma_addr_t dma;
+	dma_addr_t page_dma;
+	struct page *page;
+	unsigned int page_offset;
+};
+
+struct ngbe_queue_stats {
+	u64 packets;
+	u64 bytes;
+};
+
+struct ngbe_tx_queue_stats {
+	u64 restart_queue;
+	u64 tx_busy;
+	u64 tx_done_old;
+};
+
+struct ngbe_rx_queue_stats {
+	u64 non_eop_descs;
+	u64 alloc_rx_page_failed;
+	u64 alloc_rx_buff_failed;
+	u64 csum_good_cnt;
+	u64 csum_err;
+};
+
+#define NGBE_TS_HDR_LEN 8
+enum ngbe_ring_state_t {
+	__NGBE_RX_3K_BUFFER,
+	__NGBE_RX_BUILD_SKB_ENABLED,
+	__NGBE_TX_XPS_INIT_DONE,
+	__NGBE_TX_DETECT_HANG,
+	__NGBE_HANG_CHECK_ARMED,
+	__NGBE_RX_HS_ENABLED,
+};
+
+struct ngbe_fwd_adapter {
+	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+	struct net_device *vdev;
+	struct ngbe_adapter *adapter;
+	unsigned int tx_base_queue;
+	unsigned int rx_base_queue;
+	int index; /* pool index on PF */
+};
+
+#define ring_uses_build_skb(ring) \
+	test_bit(__NGBE_RX_BUILD_SKB_ENABLED, &(ring)->state)
+
+
+#define ring_is_hs_enabled(ring) \
+	test_bit(__NGBE_RX_HS_ENABLED, &(ring)->state)
+#define set_ring_hs_enabled(ring) \
+	set_bit(__NGBE_RX_HS_ENABLED, &(ring)->state)
+#define clear_ring_hs_enabled(ring) \
+	clear_bit(__NGBE_RX_HS_ENABLED, &(ring)->state)
+#define check_for_tx_hang(ring) \
+	test_bit(__NGBE_TX_DETECT_HANG, &(ring)->state)
+#define set_check_for_tx_hang(ring) \
+	set_bit(__NGBE_TX_DETECT_HANG, &(ring)->state)
+#define clear_check_for_tx_hang(ring) \
+	clear_bit(__NGBE_TX_DETECT_HANG, &(ring)->state)
+
+struct ngbe_ring {
+	struct ngbe_ring *next;        /* pointer to next ring in q_vector */
+	struct ngbe_q_vector *q_vector; /* backpointer to host q_vector */
+	struct net_device *netdev;      /* netdev ring belongs to */
+	struct device *dev;             /* device for DMA mapping */
+	struct ngbe_fwd_adapter *accel;
+	void *desc;                     /* descriptor ring memory */
+	union {
+		struct ngbe_tx_buffer *tx_buffer_info;
+		struct ngbe_rx_buffer *rx_buffer_info;
+	};
+	unsigned long state;
+	u8 __iomem *tail;
+	dma_addr_t dma;                 /* phys. address of descriptor ring */
+	unsigned int size;              /* length in bytes */
+
+	u16 count;                      /* amount of descriptors */
+
+	u8 queue_index; /* needed for multiqueue queue management */
+	u8 reg_idx;                     /* holds the special value that gets
+					 * the hardware register offset
+					 * associated with this ring, which is
+					 * different for DCB and RSS modes
+					 */
+	u16 next_to_use;
+	u16 next_to_clean;
+
+	unsigned long last_rx_timestamp;
+
+	u16 rx_buf_len;
+	union {
+		u16 next_to_alloc;
+		struct {
+			u8 atr_sample_rate;
+			u8 atr_count;
+		};
+	};
+
+	u8 dcb_tc;
+	struct ngbe_queue_stats stats;
+	struct u64_stats_sync syncp;
+
+	union {
+		struct ngbe_tx_queue_stats tx_stats;
+		struct ngbe_rx_queue_stats rx_stats;
+	};
+} ____cacheline_internodealigned_in_smp;
+
+enum ngbe_ring_f_enum {
+	RING_F_NONE = 0,
+	RING_F_VMDQ,  /* SR-IOV uses the same ring feature */
+	RING_F_RSS,
+	RING_F_ARRAY_SIZE  /* must be last in enum set */
+};
+
+#define TGB_MAX_RX_QUEUES 16
+#define NGBE_MAX_TX_QUEUES 16
+
+#define NGBE_MAX_RSS_INDICES           8
+#define NGBE_MAX_VMDQ_INDICES          8
+#define NGBE_MAX_FDIR_INDICES          8
+#define MAX_RX_QUEUES                  8
+#define MAX_TX_QUEUES                  8
+#define NGBE_MAX_L2A_QUEUES    4
+#define NGBE_BAD_L2A_QUEUE     3
+
+#define NGBE_MAX_MACVLANS      8
+
+struct ngbe_ring_feature {
+	u16 limit;      /* upper limit on feature indices */
+	u16 indices;    /* current value of indices */
+	u16 mask;       /* Mask used for feature to ring mapping */
+	u16 offset;     /* offset to start of feature */
+};
+
+/*
+ * FCoE requires that all Rx buffers be over 2200 bytes in length.  Since
+ * this is twice the size of a half page we need to double the page order
+ * for FCoE enabled Rx queues.
+ */
+static inline unsigned int ngbe_rx_bufsz(struct ngbe_ring __maybe_unused *ring)
+{
+#if MAX_SKB_FRAGS < 8
+	return ALIGN(NGBE_MAX_RXBUFFER / MAX_SKB_FRAGS, 1024);
+#else
+	return NGBE_RXBUFFER_2K;
+#endif
+}
+
+static inline unsigned int ngbe_rx_pg_order(struct ngbe_ring __maybe_unused *ring)
+{
+	return 0;
+}
+#define ngbe_rx_pg_size(_ring) (PAGE_SIZE << ngbe_rx_pg_order(_ring))
+
+struct ngbe_ring_container {
+	struct ngbe_ring *ring;        /* pointer to linked list of rings */
+	unsigned int total_bytes;       /* total bytes processed this int */
+	unsigned int total_packets;     /* total packets processed this int */
+	u16 work_limit;                 /* total work allowed per interrupt */
+	u8 count;                       /* total number of rings in vector */
+	u8 itr;                         /* current ITR setting for ring */
+};
+
+/* iterator for handling rings in ring container */
+#define ngbe_for_each_ring(pos, head) \
+	for (pos = (head).ring; pos != NULL; pos = pos->next)
+
+#define MAX_RX_PACKET_BUFFERS   ((adapter->flags & NGBE_FLAG_DCB_ENABLED) \
+				 ? 8 : 1)
+#define MAX_TX_PACKET_BUFFERS   MAX_RX_PACKET_BUFFERS
+
+/* MAX_MSIX_Q_VECTORS of these are allocated,
+ * but we only use one per queue-specific vector.
+ */
+struct ngbe_q_vector {
+	struct ngbe_adapter *adapter;
+	int cpu;        /* CPU for DCA */
+	u16 v_idx;      /* index of q_vector within array, also used for
+			 * finding the bit in EICR and friends that
+			 * represents the vector for this ring */
+	u16 itr;        /* Interrupt throttle rate written to EITR */
+	struct ngbe_ring_container rx, tx;
+
+	struct napi_struct napi;
+	cpumask_t affinity_mask;
+	int numa_node;
+	struct rcu_head rcu;    /* to avoid race with update stats on free */
+	char name[IFNAMSIZ + 17];
+	bool netpoll_rx;
+
+	/* for dynamic allocation of rings associated with this q_vector */
+	struct ngbe_ring ring[0] ____cacheline_internodealigned_in_smp;
+};
+
+#ifdef CONFIG_NGBE_HWMON
+
+#define NGBE_HWMON_TYPE_TEMP           0
+#define NGBE_HWMON_TYPE_ALARMTHRESH    1
+#define NGBE_HWMON_TYPE_DALARMTHRESH   2
+
+struct hwmon_attr {
+	struct device_attribute dev_attr;
+	struct ngbe_hw *hw;
+	struct ngbe_thermal_diode_data *sensor;
+	char name[19];
+};
+
+struct hwmon_buff {
+	struct device *device;
+	struct hwmon_attr *hwmon_list;
+	unsigned int n_hwmon;
+};
+#endif /* CONFIG_NGBE_HWMON */
+
+/*
+ * microsecond values for various ITR rates shifted by 2 to fit itr register
+ * with the first 3 bits reserved 0
+ */
+#define NGBE_70K_ITR          57
+#define NGBE_20K_ITR           200
+#define NGBE_4K_ITR            1024
+#define NGBE_7K_ITR            595
+
+/* ngbe_test_staterr - tests bits in Rx descriptor status and error fields */
+static inline __le32 ngbe_test_staterr(union ngbe_rx_desc *rx_desc,
+					const u32 stat_err_bits)
+{
+	return rx_desc->wb.upper.status_error & cpu_to_le32(stat_err_bits);
+}
+
+/* ngbe_desc_unused - calculate if we have unused descriptors */
+static inline u16 ngbe_desc_unused(struct ngbe_ring *ring)
+{
+	u16 ntc = ring->next_to_clean;
+	u16 ntu = ring->next_to_use;
+
+	return ((ntc > ntu) ? 0 : ring->count) + ntc - ntu - 1;
+}
+
+#define NGBE_RX_DESC(R, i)     \
+	(&(((union ngbe_rx_desc *)((R)->desc))[i]))
+#define NGBE_TX_DESC(R, i)     \
+	(&(((union ngbe_tx_desc *)((R)->desc))[i]))
+#define NGBE_TX_CTXTDESC(R, i) \
+	(&(((struct ngbe_tx_context_desc *)((R)->desc))[i]))
+
+#define NGBE_MAX_JUMBO_FRAME_SIZE      9432 /* max payload 9414 */
+#define TCP_TIMER_VECTOR        0
+#define OTHER_VECTOR    1
+#define NON_Q_VECTORS   (OTHER_VECTOR + TCP_TIMER_VECTOR)
+
+#define NGBE_MAX_MSIX_Q_VECTORS_EMERALD       9
+
+struct ngbe_mac_addr {
+	u8 addr[ETH_ALEN];
+	u16 state; /* bitmask */
+	u64 pools;
+};
+
+#define NGBE_MAC_STATE_DEFAULT         0x1
+#define NGBE_MAC_STATE_MODIFIED        0x2
+#define NGBE_MAC_STATE_IN_USE          0x4
+
+#ifdef CONFIG_NGBE_PROCFS
+struct ngbe_therm_proc_data {
+	struct ngbe_hw *hw;
+	struct ngbe_thermal_diode_data *sensor_data;
+};
+#endif
+
+/*
+ * Only for array allocations in our adapter struct.
+ * we can actually assign 64 queue vectors based on our extended-extended
+ * interrupt registers.
+ */
+#define MAX_MSIX_Q_VECTORS      NGBE_MAX_MSIX_Q_VECTORS_EMERALD
+#define MAX_MSIX_COUNT          NGBE_MAX_MSIX_VECTORS_EMERALD
+
+#define MIN_MSIX_Q_VECTORS      1
+#define MIN_MSIX_COUNT          (MIN_MSIX_Q_VECTORS + NON_Q_VECTORS)
+
+/* default to trying for four seconds */
+#define NGBE_TRY_LINK_TIMEOUT  (4 * HZ)
+#define NGBE_SFP_POLL_JIFFIES  (2 * HZ)        /* SFP poll every 2 seconds */
+
+/**
+ * ngbe_adapter.flag
+ **/
+#define NGBE_FLAG_MSI_CAPABLE                  (u32)(1 << 0)
+#define NGBE_FLAG_MSI_ENABLED                  (u32)(1 << 1)
+#define NGBE_FLAG_MSIX_CAPABLE                 (u32)(1 << 2)
+#define NGBE_FLAG_MSIX_ENABLED                 (u32)(1 << 3)
+#ifndef CONFIG_NGBE_NO_LLI
+#define NGBE_FLAG_LLI_PUSH                     (u32)(1 << 4)
+#endif
+
+#define NGBE_FLAG_TPH_ENABLED                  (u32)(1 << 6)
+#define NGBE_FLAG_TPH_CAPABLE                  (u32)(1 << 7)
+#define NGBE_FLAG_TPH_ENABLED_DATA             (u32)(1 << 8)
+
+#define NGBE_FLAG_MQ_CAPABLE                   (u32)(1 << 9)
+#define NGBE_FLAG_DCB_ENABLED                  (u32)(1 << 10)
+#define NGBE_FLAG_VMDQ_ENABLED                 (u32)(1 << 11)
+#define NGBE_FLAG_FAN_FAIL_CAPABLE             (u32)(1 << 12)
+#define NGBE_FLAG_NEED_LINK_UPDATE             (u32)(1 << 13)
+#define NGBE_FLAG_NEED_ANC_CHECK               (u32)(1 << 14)
+#define NGBE_FLAG_FDIR_HASH_CAPABLE            (u32)(1 << 15)
+#define NGBE_FLAG_FDIR_PERFECT_CAPABLE         (u32)(1 << 16)
+#define NGBE_FLAG_SRIOV_CAPABLE                (u32)(1 << 19)
+#define NGBE_FLAG_SRIOV_ENABLED                (u32)(1 << 20)
+#define NGBE_FLAG_SRIOV_REPLICATION_ENABLE     (u32)(1 << 21)
+#define NGBE_FLAG_SRIOV_L2SWITCH_ENABLE        (u32)(1 << 22)
+#define NGBE_FLAG_SRIOV_VEPA_BRIDGE_MODE       (u32)(1 << 23)
+#define NGBE_FLAG_RX_HWTSTAMP_ENABLED          (u32)(1 << 24)
+#define NGBE_FLAG_VXLAN_OFFLOAD_CAPABLE        (u32)(1 << 25)
+#define NGBE_FLAG_VXLAN_OFFLOAD_ENABLE         (u32)(1 << 26)
+#define NGBE_FLAG_RX_HWTSTAMP_IN_REGISTER      (u32)(1 << 27)
+#define NGBE_FLAG_NEED_ETH_PHY_RESET           (u32)(1 << 28)
+#define NGBE_FLAG_RX_HS_ENABLED                (u32)(1 << 30)
+#define NGBE_FLAG_LINKSEC_ENABLED              (u32)(1 << 31)
+#define NGBE_FLAG_IPSEC_ENABLED                (u32)(1 << 5)
+
+/* preset defaults */
+#define NGBE_FLAGS_SP_INIT (NGBE_FLAG_MSI_CAPABLE \
+			   | NGBE_FLAG_MSIX_CAPABLE \
+			   | NGBE_FLAG_MQ_CAPABLE \
+			   | NGBE_FLAG_SRIOV_CAPABLE)
+
+/**
+ * ngbe_adapter.flag2
+ **/
+#define NGBE_FLAG2_RSC_CAPABLE                 (1U << 0)
+#define NGBE_FLAG2_RSC_ENABLED                 (1U << 1)
+#define NGBE_FLAG2_TEMP_SENSOR_CAPABLE         (1U << 3)
+#define NGBE_FLAG2_TEMP_SENSOR_EVENT           (1U << 4)
+#define NGBE_FLAG2_SEARCH_FOR_SFP              (1U << 5)
+#define NGBE_FLAG2_SFP_NEEDS_RESET             (1U << 6)
+#define NGBE_FLAG2_PF_RESET_REQUESTED          (1U << 7)
+#define NGBE_FLAG2_FDIR_REQUIRES_REINIT        (1U << 8)
+#define NGBE_FLAG2_RSS_FIELD_IPV4_UDP          (1U << 9)
+#define NGBE_FLAG2_RSS_FIELD_IPV6_UDP          (1U << 10)
+#define NGBE_FLAG2_RSS_ENABLED                 (1U << 12)
+#define NGBE_FLAG2_PTP_PPS_ENABLED             (1U << 11)
+#define NGBE_FLAG2_EEE_CAPABLE                 (1U << 14)
+#define NGBE_FLAG2_EEE_ENABLED                 (1U << 15)
+#define NGBE_FLAG2_VXLAN_REREG_NEEDED          (1U << 16)
+#define NGBE_FLAG2_DEV_RESET_REQUESTED         (1U << 18)
+#define NGBE_FLAG2_RESET_INTR_RECEIVED         (1U << 19)
+#define NGBE_FLAG2_GLOBAL_RESET_REQUESTED      (1U << 20)
+#define NGBE_FLAG2_MNG_REG_ACCESS_DISABLED     (1U << 22)
+#define NGBE_FLAG2_SRIOV_MISC_IRQ_REMAP        (1U << 23)
+#define NGBE_FLAG2_PCIE_NEED_RECOVER           (1U << 31)
+
+#define NGBE_SET_FLAG(_input, _flag, _result) \
+	((_flag <= _result) ? \
+	 ((u32)(_input & _flag) * (_result / _flag)) : \
+	 ((u32)(_input & _flag) / (_flag / _result)))
+
+enum ngbe_isb_idx {
+	NGBE_ISB_HEADER,
+	NGBE_ISB_MISC,
+	NGBE_ISB_VEC0,
+	NGBE_ISB_VEC1,
+	NGBE_ISB_MAX
+};
+
+/* board specific private data structure */
+struct ngbe_adapter {
+	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+	/* OS defined structs */
+	struct net_device *netdev;
+	struct pci_dev *pdev;
+
+	unsigned long state;
+
+	/* Some features need tri-state capability,
+	 * thus the additional *_CAPABLE flags.
+	 */
+	u32 flags;
+	u32 flags2;
+
+	/* Tx fast path data */
+	int num_tx_queues;
+	u16 tx_itr_setting;
+	u16 tx_work_limit;
+
+	/* Rx fast path data */
+	int num_rx_queues;
+	u16 rx_itr_setting;
+	u16 rx_work_limit;
+
+	unsigned int num_vmdqs; /* does not include pools assigned to VFs */
+	unsigned int queues_per_pool;
+
+	/* TX */
+	struct ngbe_ring *tx_ring[MAX_TX_QUEUES] ____cacheline_aligned_in_smp;
+
+	u64 restart_queue;
+	u64 lsc_int;
+	u32 tx_timeout_count;
+
+	/* RX */
+	struct ngbe_ring *rx_ring[MAX_RX_QUEUES];
+	u64 hw_csum_rx_error;
+	u64 hw_csum_rx_good;
+	u64 hw_rx_no_dma_resources;
+	u64 non_eop_descs;
+	u32 alloc_rx_page_failed;
+	u32 alloc_rx_buff_failed;
+
+	struct ngbe_q_vector *q_vector[MAX_MSIX_Q_VECTORS];
+
+#ifdef HAVE_DCBNL_IEEE
+	struct ieee_pfc *ngbe_ieee_pfc;
+	struct ieee_ets *ngbe_ieee_ets;
+#endif
+	enum ngbe_fc_mode last_lfc_mode;
+	int num_q_vectors;      /* current number of q_vectors for device */
+	int max_q_vectors;      /* upper limit of q_vectors for device */
+	struct ngbe_ring_feature ring_feature[RING_F_ARRAY_SIZE];
+	struct msix_entry *msix_entries;
+
+	u64 test_icr;
+	struct ngbe_ring test_tx_ring;
+	struct ngbe_ring test_rx_ring;
+
+	/* structs defined in ngbe_hw.h */
+	struct ngbe_hw hw;
+	u16 msg_enable;
+	struct ngbe_hw_stats stats;
+#ifndef CONFIG_NGBE_NO_LLI
+	u32 lli_port;
+	u32 lli_size;
+	u32 lli_etype;
+	u32 lli_vlan_pri;
+#endif /* CONFIG_NGBE_NO_LLI */
+
+	u32 *config_space;
+	u64 tx_busy;
+	unsigned int tx_ring_count;
+	unsigned int rx_ring_count;
+
+	u32 link_speed;
+	bool link_up;
+	unsigned long sfp_poll_time;
+	unsigned long link_check_timeout;
+
+	struct timer_list service_timer;
+	struct work_struct service_task;
+#ifdef CONFIG_NGBE_POLL_LINK_STATUS
+	struct timer_list link_check_timer;
+#endif
+	u32 atr_sample_rate;
+	u8 __iomem *io_addr;    /* Mainly for iounmap use */
+	u32 wol;
+
+	u16 bd_number;
+	u16 bridge_mode;
+
+	char eeprom_id[32];
+	u16 eeprom_cap;
+	bool netdev_registered;
+	u32 interrupt_event;
+	u32 led_reg;
+
+	struct ptp_clock *ptp_clock;
+	struct ptp_clock_info ptp_caps;
+	struct work_struct ptp_tx_work;
+	struct sk_buff *ptp_tx_skb;
+	struct hwtstamp_config tstamp_config;
+	unsigned long ptp_tx_start;
+	unsigned long last_overflow_check;
+	unsigned long last_rx_ptp_check;
+	spinlock_t tmreg_lock;
+	struct cyclecounter hw_cc;
+	struct timecounter hw_tc;
+	u32 base_incval;
+	u32 tx_hwtstamp_timeouts;
+	u32 tx_hwtstamp_skipped;
+	u32 rx_hwtstamp_cleared;
+	void (*ptp_setup_sdp) (struct ngbe_adapter *);
+
+	DECLARE_BITMAP(active_vfs, NGBE_MAX_VF_FUNCTIONS);
+	unsigned int num_vfs;
+	struct vf_data_storage *vfinfo;
+	struct vf_macvlans vf_mvs;
+	struct vf_macvlans *mv_list;
+#ifdef CONFIG_PCI_IOV
+	u32 timer_event_accumulator;
+	u32 vferr_refcount;
+#endif
+	struct ngbe_mac_addr *mac_table;
+
+	__le16 vxlan_port;
+	__le16 geneve_port;
+
+#ifdef CONFIG_NGBE_SYSFS
+#ifdef CONFIG_NGBE_HWMON
+	struct hwmon_buff ngbe_hwmon_buff;
+#endif /* CONFIG_NGBE_HWMON */
+#else /* CONFIG_NGBE_SYSFS */
+#ifdef CONFIG_NGBE_PROCFS
+	struct proc_dir_entry *eth_dir;
+	struct proc_dir_entry *info_dir;
+	u64 old_lsc;
+	struct proc_dir_entry *therm_dir;
+	struct ngbe_therm_proc_data therm_data;
+#endif /* CONFIG_NGBE_PROCFS */
+#endif /* CONFIG_NGBE_SYSFS */
+
+#ifdef CONFIG_NGBE_DEBUG_FS
+	struct dentry *ngbe_dbg_adapter;
+#endif /* CONFIG_NGBE_DEBUG_FS */
+	u8 default_up;
+	unsigned long fwd_bitmask; /* bitmask indicating in use pools */
+	unsigned long tx_timeout_last_recovery;
+	u32 tx_timeout_recovery_level;
+
+#define NGBE_MAX_RETA_ENTRIES 128
+	u8 rss_indir_tbl[NGBE_MAX_RETA_ENTRIES];
+#define NGBE_RSS_KEY_SIZE     40
+	u32 rss_key[NGBE_RSS_KEY_SIZE / sizeof(u32)];
+
+	void *ipsec;
+
+	/* misc interrupt status block */
+	dma_addr_t isb_dma;
+	u32 *isb_mem;
+	u32 isb_tag[NGBE_ISB_MAX];
+
+	u32 hang_cnt;
+};
+
+static inline u32 ngbe_misc_isb(struct ngbe_adapter *adapter,
+				 enum ngbe_isb_idx idx)
+{
+	u32 cur_tag = 0;
+	u32 cur_diff = 0;
+
+	cur_tag = adapter->isb_mem[NGBE_ISB_HEADER];
+	cur_diff = cur_tag - adapter->isb_tag[idx];
+
+	adapter->isb_tag[idx] = cur_tag;
+
+	return cpu_to_le32(adapter->isb_mem[idx]);
+}
+
+static inline u8 ngbe_max_rss_indices(struct ngbe_adapter *adapter)
+{
+	return NGBE_MAX_RSS_INDICES;
+}
+
+enum ngbe_state_t {
+	__NGBE_TESTING,
+	__NGBE_RESETTING,
+	__NGBE_DOWN,
+	__NGBE_HANGING,
+	__NGBE_DISABLED,
+	__NGBE_REMOVING,
+	__NGBE_SERVICE_SCHED,
+	__NGBE_SERVICE_INITED,
+	__NGBE_IN_SFP_INIT,
+	__NGBE_PTP_RUNNING,
+	__NGBE_PTP_TX_IN_PROGRESS,
+};
+
+struct ngbe_cb {
+	dma_addr_t dma;
+	u16     append_cnt;             /* number of skb's appended */
+	bool    page_released;
+	bool    dma_released;
+};
+#define NGBE_CB(skb) ((struct ngbe_cb *)(skb)->cb)
+
+/* ESX ngbe CIM IOCTL definition */
+
+#ifdef CONFIG_NGBE_SYSFS
+void ngbe_sysfs_exit(struct ngbe_adapter *adapter);
+int ngbe_sysfs_init(struct ngbe_adapter *adapter);
+#endif /* CONFIG_NGBE_SYSFS */
+#ifdef CONFIG_NGBE_PROCFS
+void ngbe_procfs_exit(struct ngbe_adapter *adapter);
+int ngbe_procfs_init(struct ngbe_adapter *adapter);
+int ngbe_procfs_topdir_init(void);
+void ngbe_procfs_topdir_exit(void);
+#endif /* CONFIG_NGBE_PROCFS */
+
+/* needed by ngbe_main.c */
+int ngbe_validate_mac_addr(u8 *mc_addr);
+void ngbe_check_options(struct ngbe_adapter *adapter);
+void ngbe_assign_netdev_ops(struct net_device *netdev);
+
+/* needed by ngbe_ethtool.c */
+extern char ngbe_driver_name[];
+extern const char ngbe_driver_version[];
+
+void ngbe_irq_disable(struct ngbe_adapter *adapter);
+void ngbe_irq_enable(struct ngbe_adapter *adapter, bool queues, bool flush);
+int ngbe_open(struct net_device *netdev);
+int ngbe_close(struct net_device *netdev);
+void ngbe_up(struct ngbe_adapter *adapter);
+void ngbe_down(struct ngbe_adapter *adapter);
+void ngbe_reinit_locked(struct ngbe_adapter *adapter);
+void ngbe_reset(struct ngbe_adapter *adapter);
+void ngbe_set_ethtool_ops(struct net_device *netdev);
+int ngbe_setup_rx_resources(struct ngbe_ring *);
+int ngbe_setup_tx_resources(struct ngbe_ring *);
+void ngbe_free_rx_resources(struct ngbe_ring *);
+void ngbe_free_tx_resources(struct ngbe_ring *);
+void ngbe_configure_rx_ring(struct ngbe_adapter *,
+				    struct ngbe_ring *);
+void ngbe_configure_tx_ring(struct ngbe_adapter *,
+				    struct ngbe_ring *);
+void ngbe_update_stats(struct ngbe_adapter *adapter);
+int ngbe_init_interrupt_scheme(struct ngbe_adapter *adapter);
+void ngbe_reset_interrupt_capability(struct ngbe_adapter *adapter);
+void ngbe_set_interrupt_capability(struct ngbe_adapter *adapter);
+void ngbe_clear_interrupt_scheme(struct ngbe_adapter *adapter);
+netdev_tx_t ngbe_xmit_frame_ring(struct sk_buff *,
+					 struct ngbe_adapter *,
+					 struct ngbe_ring *);
+void ngbe_unmap_and_free_tx_resource(struct ngbe_ring *,
+					     struct ngbe_tx_buffer *);
+void ngbe_alloc_rx_buffers(struct ngbe_ring *, u16);
+
+void ngbe_set_rx_mode(struct net_device *netdev);
+int ngbe_write_mc_addr_list(struct net_device *netdev);
+int ngbe_setup_tc(struct net_device *dev, u8 tc);
+void ngbe_tx_ctxtdesc(struct ngbe_ring *, u32, u32, u32, u32);
+void ngbe_do_reset(struct net_device *netdev);
+void ngbe_write_eitr(struct ngbe_q_vector *q_vector);
+int ngbe_poll(struct napi_struct *napi, int budget);
+void ngbe_disable_rx_queue(struct ngbe_adapter *adapter,
+				   struct ngbe_ring *);
+void ngbe_vlan_strip_enable(struct ngbe_adapter *adapter);
+void ngbe_vlan_strip_disable(struct ngbe_adapter *adapter);
+
+#ifdef CONFIG_NGBE_DEBUG_FS
+void ngbe_dbg_adapter_init(struct ngbe_adapter *adapter);
+void ngbe_dbg_adapter_exit(struct ngbe_adapter *adapter);
+void ngbe_dbg_init(void);
+void ngbe_dbg_exit(void);
+void ngbe_dump(struct ngbe_adapter *adapter);
+#endif /* CONFIG_NGBE_DEBUG_FS */
+
+static inline struct netdev_queue *txring_txq(const struct ngbe_ring *ring)
+{
+	return netdev_get_tx_queue(ring->netdev, ring->queue_index);
+}
+
+int ngbe_wol_supported(struct ngbe_adapter *adapter);
+int ngbe_get_settings(struct net_device *netdev,
+			      struct ethtool_cmd *ecmd);
+int ngbe_write_uc_addr_list(struct net_device *netdev, int pool);
+void ngbe_full_sync_mac_table(struct ngbe_adapter *adapter);
+int ngbe_add_mac_filter(struct ngbe_adapter *adapter,
+				u8 *addr, u16 pool);
+int ngbe_del_mac_filter(struct ngbe_adapter *adapter,
+				u8 *addr, u16 pool);
+int ngbe_available_rars(struct ngbe_adapter *adapter);
+void ngbe_vlan_mode(struct net_device *, u32);
+
+void ngbe_ptp_init(struct ngbe_adapter *adapter);
+void ngbe_ptp_stop(struct ngbe_adapter *adapter);
+void ngbe_ptp_suspend(struct ngbe_adapter *adapter);
+void ngbe_ptp_overflow_check(struct ngbe_adapter *adapter);
+void ngbe_ptp_rx_hang(struct ngbe_adapter *adapter);
+void ngbe_ptp_rx_hwtstamp(struct ngbe_adapter *adapter, struct sk_buff *skb);
+int ngbe_ptp_set_ts_config(struct ngbe_adapter *adapter, struct ifreq *ifr);
+int ngbe_ptp_get_ts_config(struct ngbe_adapter *adapter, struct ifreq *ifr);
+void ngbe_ptp_start_cyclecounter(struct ngbe_adapter *adapter);
+void ngbe_ptp_reset(struct ngbe_adapter *adapter);
+void ngbe_ptp_check_pps_event(struct ngbe_adapter *adapter);
+
+#ifdef CONFIG_PCI_IOV
+void ngbe_sriov_reinit(struct ngbe_adapter *adapter);
+#endif
+
+void ngbe_set_rx_drop_en(struct ngbe_adapter *adapter);
+
+u32 ngbe_rss_indir_tbl_entries(struct ngbe_adapter *adapter);
+void ngbe_store_reta(struct ngbe_adapter *adapter);
+
+/**
+ * interrupt masking operations. each bit in PX_ICn correspond to a interrupt.
+ * disable a interrupt by writing to PX_IMS with the corresponding bit=1
+ * enable a interrupt by writing to PX_IMC with the corresponding bit=1
+ * trigger a interrupt by writing to PX_ICS with the corresponding bit=1
+ **/
+//#define NGBE_INTR_ALL (~0ULL)
+#define NGBE_INTR_ALL 0x1FF
+#define NGBE_INTR_MISC(A) (1ULL << (A)->num_q_vectors)
+#define NGBE_INTR_MISC_VMDQ(A) (1ULL << ((A)->num_q_vectors + (A)->ring_feature[RING_F_VMDQ].offset))
+#define NGBE_INTR_QALL(A) (NGBE_INTR_MISC(A) - 1)
+#define NGBE_INTR_Q(i) (1ULL << (i))
+static inline void ngbe_intr_enable(struct ngbe_hw *hw, u64 qmask)
+{
+	u32 mask;
+
+	mask = (qmask & 0xFFFFFFFF);
+	if (mask) {
+		wr32(hw, NGBE_PX_IMC, mask);
+	}
+}
+
+static inline void ngbe_intr_disable(struct ngbe_hw *hw, u64 qmask)
+{
+	u32 mask;
+
+	mask = (qmask & 0xFFFFFFFF);
+	if (mask)
+		wr32(hw, NGBE_PX_IMS, mask);
+}
+
+static inline void ngbe_intr_trigger(struct ngbe_hw *hw, u64 qmask)
+{
+	u32 mask;
+
+	mask = (qmask & 0xFFFFFFFF);
+	if (mask)
+		wr32(hw, NGBE_PX_ICS, mask);
+}
+
+#define NGBE_RING_SIZE(R) ((R)->count < NGBE_MAX_TXD ? (R)->count / 128 : 0)
+
+
+#define NGBE_CPU_TO_BE16(_x) cpu_to_be16(_x)
+#define NGBE_BE16_TO_CPU(_x) be16_to_cpu(_x)
+#define NGBE_CPU_TO_BE32(_x) cpu_to_be32(_x)
+#define NGBE_BE32_TO_CPU(_x) be32_to_cpu(_x)
+
+#define msec_delay(_x) msleep(_x)
+
+#define usec_delay(_x) udelay(_x)
+
+#define STATIC static
+
+#define NGBE_NAME "ngbe"
+
+#define DPRINTK(nlevel, klevel, fmt, args...) \
+	((void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \
+	printk(KERN_##klevel NGBE_NAME ": %s: %s: " fmt, \
+		adapter->netdev->name, \
+		__func__, ## args)))
+
+#define ngbe_emerg(fmt, ...)   printk(KERN_EMERG fmt, ## __VA_ARGS__)
+#define ngbe_alert(fmt, ...)   printk(KERN_ALERT fmt, ## __VA_ARGS__)
+#define ngbe_crit(fmt, ...)    printk(KERN_CRIT fmt, ## __VA_ARGS__)
+#define ngbe_error(fmt, ...)   printk(KERN_ERR fmt, ## __VA_ARGS__)
+#define ngbe_warn(fmt, ...)    printk(KERN_WARNING fmt, ## __VA_ARGS__)
+#define ngbe_notice(fmt, ...)  printk(KERN_NOTICE fmt, ## __VA_ARGS__)
+#define ngbe_info(fmt, ...)    printk(KERN_INFO fmt, ## __VA_ARGS__)
+#define ngbe_print(fmt, ...)   printk(KERN_DEBUG fmt, ## __VA_ARGS__)
+#define ngbe_trace(fmt, ...)   printk(KERN_INFO fmt, ## __VA_ARGS__)
+
+#define ngbe_debug(fmt, ...) do {} while (0)
+
+#define ASSERT(_x)              do {} while (0)
+#define DEBUGOUT(S)             do {} while (0)
+#define DEBUGOUT1(S, A...)      do {} while (0)
+#define DEBUGOUT2(S, A...)      do {} while (0)
+#define DEBUGOUT3(S, A...)      do {} while (0)
+#define DEBUGOUT4(S, A...)      do {} while (0)
+#define DEBUGOUT5(S, A...)      do {} while (0)
+#define DEBUGOUT6(S, A...)      do {} while (0)
+#define DEBUGFUNC(fmt, ...)     do {} while (0)
+
+#define NGBE_SFP_DETECT_RETRIES        2
+
+struct ngbe_hw;
+struct ngbe_msg {
+	u16 msg_enable;
+};
+struct net_device *ngbe_hw_to_netdev(const struct ngbe_hw *hw);
+struct ngbe_msg *ngbe_hw_to_msg(const struct ngbe_hw *hw);
+
+static inline struct device *pci_dev_to_dev(struct pci_dev *pdev)
+{
+	return &pdev->dev;
+}
+
+#define hw_dbg(hw, format, arg...) \
+	netdev_dbg(ngbe_hw_to_netdev(hw), format, ## arg)
+#define hw_err(hw, format, arg...) \
+	netdev_err(ngbe_hw_to_netdev(hw), format, ## arg)
+#define e_dev_info(format, arg...) \
+	dev_info(pci_dev_to_dev(adapter->pdev), format, ## arg)
+#define e_dev_warn(format, arg...) \
+	dev_warn(pci_dev_to_dev(adapter->pdev), format, ## arg)
+#define e_dev_err(format, arg...) \
+	dev_err(pci_dev_to_dev(adapter->pdev), format, ## arg)
+#define e_dev_notice(format, arg...) \
+	dev_notice(pci_dev_to_dev(adapter->pdev), format, ## arg)
+#define e_dbg(msglvl, format, arg...) \
+	netif_dbg(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_info(msglvl, format, arg...) \
+	netif_info(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_err(msglvl, format, arg...) \
+	netif_err(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_warn(msglvl, format, arg...) \
+	netif_warn(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_crit(msglvl, format, arg...) \
+	netif_crit(adapter, msglvl, adapter->netdev, format, ## arg)
+
+#define NGBE_FAILED_READ_CFG_DWORD 0xffffffffU
+#define NGBE_FAILED_READ_CFG_WORD  0xffffU
+#define NGBE_FAILED_READ_CFG_BYTE  0xffU
+
+extern u32 ngbe_read_reg(struct ngbe_hw *hw, u32 reg, bool quiet);
+extern u16 ngbe_read_pci_cfg_word(struct ngbe_hw *hw, u32 reg);
+extern void ngbe_write_pci_cfg_word(struct ngbe_hw *hw, u32 reg, u16 value);
+
+#define NGBE_READ_PCIE_WORD ngbe_read_pci_cfg_word
+#define NGBE_WRITE_PCIE_WORD ngbe_write_pci_cfg_word
+#define NGBE_R32_Q(h, r) ngbe_read_reg(h, r, true)
+
+#ifndef writeq
+#define writeq(val, addr)       do { writel((u32) (val), addr); \
+				     writel((u32) (val >> 32), (addr + 4)); \
+				} while (0);
+#endif
+
+#define NGBE_EEPROM_GRANT_ATTEMPS 100
+#define NGBE_HTONL(_i) htonl(_i)
+#define NGBE_NTOHL(_i) ntohl(_i)
+#define NGBE_NTOHS(_i) ntohs(_i)
+#define NGBE_CPU_TO_LE32(_i) cpu_to_le32(_i)
+#define NGBE_LE32_TO_CPUS(_i) le32_to_cpus(_i)
+
+enum {
+	NGBE_ERROR_SOFTWARE,
+	NGBE_ERROR_POLLING,
+	NGBE_ERROR_INVALID_STATE,
+	NGBE_ERROR_UNSUPPORTED,
+	NGBE_ERROR_ARGUMENT,
+	NGBE_ERROR_CAUTION,
+};
+
+#define ERROR_REPORT(level, format, arg...) do {                               \
+	switch (level) {                                                       \
+	case NGBE_ERROR_SOFTWARE:                                             \
+	case NGBE_ERROR_CAUTION:                                              \
+	case NGBE_ERROR_POLLING:                                              \
+		netif_warn(ngbe_hw_to_msg(hw), drv, ngbe_hw_to_netdev(hw),   \
+			   format, ## arg);                                    \
+		break;                                                         \
+	case NGBE_ERROR_INVALID_STATE:                                        \
+	case NGBE_ERROR_UNSUPPORTED:                                          \
+	case NGBE_ERROR_ARGUMENT:                                             \
+		netif_err(ngbe_hw_to_msg(hw), hw, ngbe_hw_to_netdev(hw),     \
+			  format, ## arg);                                     \
+		break;                                                         \
+	default:                                                               \
+		break;                                                         \
+	}                                                                      \
+} while (0)
+
+#define ERROR_REPORT1 ERROR_REPORT
+#define ERROR_REPORT2 ERROR_REPORT
+#define ERROR_REPORT3 ERROR_REPORT
+
+#define UNREFERENCED_XPARAMETER
+#define UNREFERENCED_1PARAMETER(_p) do {                \
+	uninitialized_var(_p);                          \
+} while (0)
+#define UNREFERENCED_2PARAMETER(_p, _q) do {            \
+	uninitialized_var(_p);                          \
+	uninitialized_var(_q);                          \
+} while (0)
+#define UNREFERENCED_3PARAMETER(_p, _q, _r) do {        \
+	uninitialized_var(_p);                          \
+	uninitialized_var(_q);                          \
+	uninitialized_var(_r);                          \
+} while (0)
+#define UNREFERENCED_4PARAMETER(_p, _q, _r, _s) do {    \
+	uninitialized_var(_p);                          \
+	uninitialized_var(_q);                          \
+	uninitialized_var(_r);                          \
+	uninitialized_var(_s);                          \
+} while (0)
+#define UNREFERENCED_PARAMETER(_p) UNREFERENCED_1PARAMETER(_p)
+
+#endif /* _NGBE_H_ */
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_debugfs.c b/drivers/net/ethernet/netswift/ngbe/ngbe_debugfs.c
new file mode 100644
index 0000000000000..6710dff494796
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_debugfs.c
@@ -0,0 +1,764 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+
+#include "ngbe.h"
+
+#ifdef CONFIG_NGBE_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/module.h>
+
+static struct dentry *ngbe_dbg_root;
+static int ngbe_data_mode;
+
+#define NGBE_DATA_FUNC(dm)  ((dm) & ~0xFFFF)
+#define NGBE_DATA_ARGS(dm)  ((dm) & 0xFFFF)
+enum ngbe_data_func {
+	NGBE_FUNC_NONE        = (0 << 16),
+	NGBE_FUNC_DUMP_BAR    = (1 << 16),
+	NGBE_FUNC_DUMP_RDESC  = (2 << 16),
+	NGBE_FUNC_DUMP_TDESC  = (3 << 16),
+	NGBE_FUNC_FLASH_READ  = (4 << 16),
+	NGBE_FUNC_FLASH_WRITE = (5 << 16),
+};
+
+/**
+ * data operation
+ **/
+ssize_t
+ngbe_simple_read_from_pcibar(struct ngbe_adapter *adapter, int res,
+		void __user *buf, size_t size, loff_t *ppos)
+{
+	loff_t pos = *ppos;
+	u32 miss, len, limit = pci_resource_len(adapter->pdev, res);
+
+	if (pos < 0)
+		return 0;
+
+	limit = (pos + size <= limit ? pos + size : limit);
+	for (miss = 0; pos < limit && !miss; buf += len, pos += len) {
+		u32 val = 0, reg = round_down(pos, 4);
+		u32 off = pos - reg;
+
+		len = (reg + 4 <= limit ? 4 - off : 4 - off - (limit - reg - 4));
+		val = ngbe_rd32(adapter->io_addr + reg);
+		miss = copy_to_user(buf, &val + off, len);
+	}
+
+	size = pos - *ppos - miss;
+	*ppos += size;
+
+	return size;
+}
+
+ssize_t
+ngbe_simple_read_from_flash(struct ngbe_adapter *adapter,
+		void __user *buf, size_t size, loff_t *ppos)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	loff_t pos = *ppos;
+	size_t ret = 0;
+	loff_t rpos, rtail;
+	void __user *to = buf;
+	size_t available = adapter->hw.flash.dword_size << 2;
+
+	if (pos < 0)
+		return -EINVAL;
+	if (pos >= available || !size)
+		return 0;
+	if (size > available - pos)
+		size = available - pos;
+
+	rpos = round_up(pos, 4);
+	rtail = round_down(pos + size, 4);
+	if (rtail < rpos)
+		return 0;
+
+	to += rpos - pos;
+	while (rpos <= rtail) {
+		u32 value = ngbe_rd32(adapter->io_addr + rpos);
+		if (TCALL(hw, flash.ops.write_buffer, rpos>>2, 1, &value)) {
+			ret = size;
+			break;
+		}
+		if (4 == copy_to_user(to, &value, 4)) {
+			ret = size;
+			break;
+		}
+		to += 4;
+		rpos += 4;
+	}
+
+	if (ret == size)
+		return -EFAULT;
+	size -= ret;
+	*ppos = pos + size;
+	return size;
+}
+
+ssize_t
+ngbe_simple_write_to_flash(struct ngbe_adapter *adapter,
+	const void __user *from, size_t size, loff_t *ppos, size_t available)
+{
+	return size;
+}
+
+static ssize_t
+ngbe_dbg_data_ops_read(struct file *filp, char __user *buffer,
+				    size_t size, loff_t *ppos)
+{
+	struct ngbe_adapter *adapter = filp->private_data;
+	u32 func = NGBE_DATA_FUNC(ngbe_data_mode);
+
+	rmb();
+
+	switch (func) {
+	case NGBE_FUNC_DUMP_BAR: {
+		u32 bar = NGBE_DATA_ARGS(ngbe_data_mode);
+
+		return ngbe_simple_read_from_pcibar(adapter, bar, buffer, size,
+					       ppos);
+		break;
+	}
+	case NGBE_FUNC_FLASH_READ: {
+		return ngbe_simple_read_from_flash(adapter, buffer, size, ppos);
+		break;
+	}
+	case NGBE_FUNC_DUMP_RDESC: {
+		struct ngbe_ring *ring;
+		u32 queue = NGBE_DATA_ARGS(ngbe_data_mode);
+
+		if (queue >= adapter->num_rx_queues)
+			return 0;
+		queue += VMDQ_P(0) * adapter->queues_per_pool;
+		ring = adapter->rx_ring[queue];
+
+		return simple_read_from_buffer(buffer, size, ppos,
+			ring->desc, ring->size);
+		break;
+	}
+	case NGBE_FUNC_DUMP_TDESC: {
+		struct ngbe_ring *ring;
+		u32 queue = NGBE_DATA_ARGS(ngbe_data_mode);
+
+		if (queue >= adapter->num_tx_queues)
+			return 0;
+		queue += VMDQ_P(0) * adapter->queues_per_pool;
+		ring = adapter->tx_ring[queue];
+
+		return simple_read_from_buffer(buffer, size, ppos,
+			ring->desc, ring->size);
+		break;
+	}
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static ssize_t
+ngbe_dbg_data_ops_write(struct file *filp,
+				     const char __user *buffer,
+				     size_t size, loff_t *ppos)
+{
+	struct ngbe_adapter *adapter = filp->private_data;
+	u32 func = NGBE_DATA_FUNC(ngbe_data_mode);
+
+	rmb();
+
+	switch (func) {
+	case NGBE_FUNC_FLASH_WRITE: {
+		u32 size = NGBE_DATA_ARGS(ngbe_data_mode);
+
+		if (size > adapter->hw.flash.dword_size << 2)
+			size = adapter->hw.flash.dword_size << 2;
+
+		return ngbe_simple_write_to_flash(adapter, buffer, size, ppos, size);
+		break;
+	}
+	default:
+		break;
+	}
+
+	return size;
+}
+static struct file_operations ngbe_dbg_data_ops_fops = {
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.read = ngbe_dbg_data_ops_read,
+	.write = ngbe_dbg_data_ops_write,
+};
+
+/**
+ * reg_ops operation
+ **/
+static char ngbe_dbg_reg_ops_buf[256] = "";
+static ssize_t
+ngbe_dbg_reg_ops_read(struct file *filp, char __user *buffer,
+				    size_t count, loff_t *ppos)
+{
+	struct ngbe_adapter *adapter = filp->private_data;
+	char *buf;
+	int len;
+
+	/* don't allow partial reads */
+	if (*ppos != 0)
+		return 0;
+
+	buf = kasprintf(GFP_KERNEL, "%s: mode=0x%08x\n%s\n",
+			adapter->netdev->name, ngbe_data_mode,
+			ngbe_dbg_reg_ops_buf);
+	if (!buf)
+		return -ENOMEM;
+
+	if (count < strlen(buf)) {
+		kfree(buf);
+		return -ENOSPC;
+	}
+
+	len = simple_read_from_buffer(buffer, count, ppos, buf, strlen(buf));
+
+	kfree(buf);
+	return len;
+}
+
+static ssize_t
+ngbe_dbg_reg_ops_write(struct file *filp,
+				     const char __user *buffer,
+				     size_t count, loff_t *ppos)
+{
+	struct ngbe_adapter *adapter = filp->private_data;
+	char *pc = ngbe_dbg_reg_ops_buf;
+	int len;
+
+	/* don't allow partial writes */
+	if (*ppos != 0)
+		return 0;
+	if (count >= sizeof(ngbe_dbg_reg_ops_buf))
+		return -ENOSPC;
+
+	len = simple_write_to_buffer(ngbe_dbg_reg_ops_buf,
+				     sizeof(ngbe_dbg_reg_ops_buf)-1,
+				     ppos,
+				     buffer,
+				     count);
+	if (len < 0)
+		return len;
+
+	pc[len] = '\0';
+
+	if (strncmp(pc, "dump", 4) == 0) {
+		u32 mode = 0;
+		u16 args;
+
+		pc += 4;
+		pc += strspn(pc, " \t");
+
+		if (!strncmp(pc, "bar", 3)) {
+			pc += 3;
+			mode = NGBE_FUNC_DUMP_BAR;
+		} else if (!strncmp(pc, "rdesc", 5)) {
+			pc += 5;
+			mode = NGBE_FUNC_DUMP_RDESC;
+		} else if (!strncmp(pc, "tdesc", 5)) {
+			pc += 5;
+			mode = NGBE_FUNC_DUMP_TDESC;
+		} else {
+			ngbe_dump(adapter);
+		}
+
+		if (mode && 1 == sscanf(pc, "%hu", &args)) {
+			mode |= args;
+		}
+
+		ngbe_data_mode = mode;
+	} else if (strncmp(pc, "flash", 4) == 0) {
+		u32 mode = 0;
+		u16 args;
+
+		pc += 5;
+		pc += strspn(pc, " \t");
+		if (!strncmp(pc, "read", 3)) {
+			pc += 4;
+			mode = NGBE_FUNC_FLASH_READ;
+		} else if (!strncmp(pc, "write", 5)) {
+			pc += 5;
+			mode = NGBE_FUNC_FLASH_WRITE;
+		}
+
+		if (mode && 1 == sscanf(pc, "%hu", &args)) {
+			mode |= args;
+		}
+
+		ngbe_data_mode = mode;
+	} else if (strncmp(ngbe_dbg_reg_ops_buf, "write", 5) == 0) {
+		u32 reg, value;
+		int cnt;
+		cnt = sscanf(&ngbe_dbg_reg_ops_buf[5], "%x %x", &reg, &value);
+		if (cnt == 2) {
+			wr32(&adapter->hw, reg, value);
+			e_dev_info("write: 0x%08x = 0x%08x\n", reg, value);
+		} else {
+			e_dev_info("write <reg> <value>\n");
+		}
+	} else if (strncmp(ngbe_dbg_reg_ops_buf, "read", 4) == 0) {
+		u32 reg, value;
+		int cnt;
+		cnt = sscanf(&ngbe_dbg_reg_ops_buf[4], "%x", &reg);
+		if (cnt == 1) {
+			value = rd32(&adapter->hw, reg);
+			e_dev_info("read 0x%08x = 0x%08x\n", reg, value);
+		} else {
+			e_dev_info("read <reg>\n");
+		}
+	} else {
+		e_dev_info("Unknown command %s\n", ngbe_dbg_reg_ops_buf);
+		e_dev_info("Available commands:\n");
+		e_dev_info("   read <reg>\n");
+		e_dev_info("   write <reg> <value>\n");
+	}
+	return count;
+}
+
+static const struct file_operations ngbe_dbg_reg_ops_fops = {
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.read =  ngbe_dbg_reg_ops_read,
+	.write = ngbe_dbg_reg_ops_write,
+};
+
+/**
+ * netdev_ops operation
+ **/
+static char ngbe_dbg_netdev_ops_buf[256] = "";
+static ssize_t
+ngbe_dbg_netdev_ops_read(struct file *filp,
+					 char __user *buffer,
+					 size_t count, loff_t *ppos)
+{
+	struct ngbe_adapter *adapter = filp->private_data;
+	char *buf;
+	int len;
+
+	/* don't allow partial reads */
+	if (*ppos != 0)
+		return 0;
+
+	buf = kasprintf(GFP_KERNEL, "%s: mode=0x%08x\n%s\n",
+			adapter->netdev->name, ngbe_data_mode,
+			ngbe_dbg_netdev_ops_buf);
+	if (!buf)
+		return -ENOMEM;
+
+	if (count < strlen(buf)) {
+		kfree(buf);
+		return -ENOSPC;
+	}
+
+	len = simple_read_from_buffer(buffer, count, ppos, buf, strlen(buf));
+
+	kfree(buf);
+	return len;
+}
+
+static ssize_t
+ngbe_dbg_netdev_ops_write(struct file *filp,
+					  const char __user *buffer,
+					  size_t count, loff_t *ppos)
+{
+	struct ngbe_adapter *adapter = filp->private_data;
+	int len;
+
+	/* don't allow partial writes */
+	if (*ppos != 0)
+		return 0;
+	if (count >= sizeof(ngbe_dbg_netdev_ops_buf))
+		return -ENOSPC;
+
+	len = simple_write_to_buffer(ngbe_dbg_netdev_ops_buf,
+				     sizeof(ngbe_dbg_netdev_ops_buf)-1,
+				     ppos,
+				     buffer,
+				     count);
+	if (len < 0)
+		return len;
+
+	ngbe_dbg_netdev_ops_buf[len] = '\0';
+
+	if (strncmp(ngbe_dbg_netdev_ops_buf, "tx_timeout", 10) == 0) {
+		adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);
+		e_dev_info("tx_timeout called\n");
+	} else {
+		e_dev_info("Unknown command: %s\n", ngbe_dbg_netdev_ops_buf);
+		e_dev_info("Available commands:\n");
+		e_dev_info("    tx_timeout\n");
+	}
+	return count;
+}
+
+static struct file_operations ngbe_dbg_netdev_ops_fops = {
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.read = ngbe_dbg_netdev_ops_read,
+	.write = ngbe_dbg_netdev_ops_write,
+};
+
+/**
+ * ngbe_dbg_adapter_init - setup the debugfs directory for the adapter
+ * @adapter: the adapter that is starting up
+ **/
+void ngbe_dbg_adapter_init(struct ngbe_adapter *adapter)
+{
+	const char *name = pci_name(adapter->pdev);
+	struct dentry *pfile;
+
+	adapter->ngbe_dbg_adapter = debugfs_create_dir(name, ngbe_dbg_root);
+	if (!adapter->ngbe_dbg_adapter) {
+		e_dev_err("debugfs entry for %s failed\n", name);
+		return;
+	}
+
+	pfile = debugfs_create_file("data", 0600,
+				    adapter->ngbe_dbg_adapter, adapter,
+				    &ngbe_dbg_data_ops_fops);
+	if (!pfile)
+		e_dev_err("debugfs netdev_ops for %s failed\n", name);
+
+	pfile = debugfs_create_file("reg_ops", 0600,
+				    adapter->ngbe_dbg_adapter, adapter,
+				    &ngbe_dbg_reg_ops_fops);
+	if (!pfile)
+		e_dev_err("debugfs reg_ops for %s failed\n", name);
+
+	pfile = debugfs_create_file("netdev_ops", 0600,
+				    adapter->ngbe_dbg_adapter, adapter,
+				    &ngbe_dbg_netdev_ops_fops);
+	if (!pfile)
+		e_dev_err("debugfs netdev_ops for %s failed\n", name);
+}
+
+/**
+ * ngbe_dbg_adapter_exit - clear out the adapter's debugfs entries
+ * @pf: the pf that is stopping
+ **/
+void ngbe_dbg_adapter_exit(struct ngbe_adapter *adapter)
+{
+	if (adapter->ngbe_dbg_adapter)
+		debugfs_remove_recursive(adapter->ngbe_dbg_adapter);
+	adapter->ngbe_dbg_adapter = NULL;
+}
+
+/**
+ * ngbe_dbg_init - start up debugfs for the driver
+ **/
+void ngbe_dbg_init(void)
+{
+	ngbe_dbg_root = debugfs_create_dir(ngbe_driver_name, NULL);
+	if (ngbe_dbg_root == NULL)
+		pr_err("init of debugfs failed\n");
+}
+
+/**
+ * ngbe_dbg_exit - clean out the driver's debugfs entries
+ **/
+void ngbe_dbg_exit(void)
+{
+	debugfs_remove_recursive(ngbe_dbg_root);
+}
+
+#endif /* CONFIG_NGBE_DEBUG_FS */
+
+struct ngbe_reg_info {
+	u32 offset;
+	u32 length;
+	char *name;
+};
+
+static struct ngbe_reg_info ngbe_reg_info_tbl[] = {
+
+	/* General Registers */
+	{NGBE_CFG_PORT_CTL, 1, "CTRL"},
+	{NGBE_CFG_PORT_ST, 1, "STATUS"},
+
+	/* RX Registers */
+	{NGBE_PX_RR_CFG(0), 1, "SRRCTL"},
+	{NGBE_PX_RR_RP(0), 1, "RDH"},
+	{NGBE_PX_RR_WP(0), 1, "RDT"},
+	{NGBE_PX_RR_CFG(0), 1, "RXDCTL"},
+	{NGBE_PX_RR_BAL(0), 1, "RDBAL"},
+	{NGBE_PX_RR_BAH(0), 1, "RDBAH"},
+
+	/* TX Registers */
+	{NGBE_PX_TR_BAL(0), 1, "TDBAL"},
+	{NGBE_PX_TR_BAH(0), 1, "TDBAH"},
+	{NGBE_PX_TR_RP(0), 1, "TDH"},
+	{NGBE_PX_TR_WP(0), 1, "TDT"},
+	{NGBE_PX_TR_CFG(0), 1, "TXDCTL"},
+
+	/* MACVLAN */
+	{NGBE_PSR_MAC_SWC_VM, 128, "PSR_MAC_SWC_VM"},
+	{NGBE_PSR_MAC_SWC_AD_L, 32, "PSR_MAC_SWC_AD"},
+	{NGBE_PSR_VLAN_TBL(0),  128, "PSR_VLAN_TBL"},
+
+	/* List Terminator */
+	{ .name = NULL }
+};
+
+/**
+ * ngbe_regdump - register printout routine
+ **/
+static void
+ngbe_regdump(struct ngbe_hw *hw, struct ngbe_reg_info *reg_info)
+{
+	int i, n = 0;
+	u32 buffer[32*8];
+
+	switch (reg_info->offset) {
+	case NGBE_PSR_MAC_SWC_AD_L:
+		for (i = 0; i < reg_info->length; i++) {
+			wr32(hw, NGBE_PSR_MAC_SWC_IDX, i);
+			buffer[n++] =
+				rd32(hw, NGBE_PSR_MAC_SWC_AD_H);
+			buffer[n++] =
+				rd32(hw, NGBE_PSR_MAC_SWC_AD_L);
+		}
+		break;
+	default:
+		for (i = 0; i < reg_info->length; i++) {
+			buffer[n++] = rd32(hw,
+				reg_info->offset + 4*i);
+		}
+		break;
+	}
+	BUG_ON(n);
+}
+
+/**
+ * ngbe_dump - Print registers, tx-rings and rx-rings
+ **/
+void ngbe_dump(struct ngbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct ngbe_hw *hw = &adapter->hw;
+	struct ngbe_reg_info *reg_info;
+	int n = 0;
+	struct ngbe_ring *tx_ring;
+	struct ngbe_tx_buffer *tx_buffer;
+	union ngbe_tx_desc *tx_desc;
+	struct my_u0 { u64 a; u64 b; } *u0;
+	struct ngbe_ring *rx_ring;
+	union ngbe_rx_desc *rx_desc;
+	struct ngbe_rx_buffer *rx_buffer_info;
+	u32 staterr;
+	int i = 0;
+
+	if (!netif_msg_hw(adapter))
+		return;
+
+	/* Print Registers */
+	dev_info(&adapter->pdev->dev, "Register Dump\n");
+	pr_info(" Register Name   Value\n");
+	for (reg_info = ngbe_reg_info_tbl; reg_info->name; reg_info++) {
+		ngbe_regdump(hw, reg_info);
+	}
+
+	/* Print TX Ring Summary */
+	if (!netdev || !netif_running(netdev))
+		return;
+
+	dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
+	pr_info(" %s     %s              %s        %s\n",
+		"Queue [NTU] [NTC] [bi(ntc)->dma  ]",
+		"leng", "ntw", "timestamp");
+	for (n = 0; n < adapter->num_tx_queues; n++) {
+		tx_ring = adapter->tx_ring[n];
+		tx_buffer = &tx_ring->tx_buffer_info[tx_ring->next_to_clean];
+		pr_info(" %5d %5X %5X %016llX %08X %p %016llX\n",
+			   n, tx_ring->next_to_use, tx_ring->next_to_clean,
+			   (u64)dma_unmap_addr(tx_buffer, dma),
+			   dma_unmap_len(tx_buffer, len),
+			   tx_buffer->next_to_watch,
+			   (u64)tx_buffer->time_stamp);
+	}
+
+	/* Print TX Rings */
+	if (!netif_msg_tx_done(adapter))
+		goto rx_ring_summary;
+
+	dev_info(&adapter->pdev->dev, "TX Rings Dump\n");
+
+	/* Transmit Descriptor Formats
+	 *
+	 * Transmit Descriptor (Read)
+	 *   +--------------------------------------------------------------+
+	 * 0 |         Buffer Address [63:0]                                |
+	 *   +--------------------------------------------------------------+
+	 * 8 |PAYLEN  |POPTS|CC|IDX  |STA  |DCMD  |DTYP |MAC  |RSV  |DTALEN |
+	 *   +--------------------------------------------------------------+
+	 *   63     46 45 40 39 38 36 35 32 31  24 23 20 19 18 17 16 15     0
+	 *
+	 * Transmit Descriptor (Write-Back)
+	 *   +--------------------------------------------------------------+
+	 * 0 |                          RSV [63:0]                          |
+	 *   +--------------------------------------------------------------+
+	 * 8 |            RSV           |  STA  |           RSV             |
+	 *   +--------------------------------------------------------------+
+	 *   63                       36 35   32 31                         0
+	 */
+
+	for (n = 0; n < adapter->num_tx_queues; n++) {
+		tx_ring = adapter->tx_ring[n];
+		pr_info("------------------------------------\n");
+		pr_info("TX QUEUE INDEX = %d\n", tx_ring->queue_index);
+		pr_info("------------------------------------\n");
+		pr_info("%s%s    %s              %s        %s          %s\n",
+			"T [desc]     [address 63:0  ] ",
+			"[PlPOIdStDDt Ln] [bi->dma       ] ",
+			"leng", "ntw", "timestamp", "bi->skb");
+
+		for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
+			tx_desc = NGBE_TX_DESC(tx_ring, i);
+			tx_buffer = &tx_ring->tx_buffer_info[i];
+			u0 = (struct my_u0 *)tx_desc;
+			if (dma_unmap_len(tx_buffer, len) > 0) {
+				pr_info("T [0x%03X]    %016llX %016llX %016llX "
+					"%08X %p %016llX %p",
+					i,
+					le64_to_cpu(u0->a),
+					le64_to_cpu(u0->b),
+					(u64)dma_unmap_addr(tx_buffer, dma),
+					dma_unmap_len(tx_buffer, len),
+					tx_buffer->next_to_watch,
+					(u64)tx_buffer->time_stamp,
+					tx_buffer->skb);
+				if (i == tx_ring->next_to_use &&
+					i == tx_ring->next_to_clean)
+					pr_cont(" NTC/U\n");
+				else if (i == tx_ring->next_to_use)
+					pr_cont(" NTU\n");
+				else if (i == tx_ring->next_to_clean)
+					pr_cont(" NTC\n");
+				else
+					pr_cont("\n");
+
+				if (netif_msg_pktdata(adapter) &&
+				    tx_buffer->skb)
+					print_hex_dump(KERN_INFO, "",
+						DUMP_PREFIX_ADDRESS, 16, 1,
+						tx_buffer->skb->data,
+						dma_unmap_len(tx_buffer, len),
+						true);
+			}
+		}
+	}
+
+	/* Print RX Rings Summary */
+rx_ring_summary:
+	dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
+	pr_info("Queue [NTU] [NTC]\n");
+	for (n = 0; n < adapter->num_rx_queues; n++) {
+		rx_ring = adapter->rx_ring[n];
+		pr_info("%5d %5X %5X\n",
+			n, rx_ring->next_to_use, rx_ring->next_to_clean);
+	}
+
+	/* Print RX Rings */
+	if (!netif_msg_rx_status(adapter))
+		return;
+
+	dev_info(&adapter->pdev->dev, "RX Rings Dump\n");
+
+	/* Receive Descriptor Formats
+	 *
+	 * Receive Descriptor (Read)
+	 *    63                                           1        0
+	 *    +-----------------------------------------------------+
+	 *  0 |       Packet Buffer Address [63:1]           |A0/NSE|
+	 *    +----------------------------------------------+------+
+	 *  8 |       Header Buffer Address [63:1]           |  DD  |
+	 *    +-----------------------------------------------------+
+	 *
+	 *
+	 * Receive Descriptor (Write-Back)
+	 *
+	 *   63       48 47    32 31  30      21 20 17 16   4 3     0
+	 *   +------------------------------------------------------+
+	 * 0 |RSS / Frag Checksum|SPH| HDR_LEN  |RSC- |Packet|  RSS |
+	 *   |/ RTT / PCoE_PARAM |   |          | CNT | Type | Type |
+	 *   |/ Flow Dir Flt ID  |   |          |     |      |      |
+	 *   +------------------------------------------------------+
+	 * 8 | VLAN Tag | Length |Extended Error| Xtnd Status/NEXTP |
+	 *   +------------------------------------------------------+
+	 *   63       48 47    32 31          20 19                 0
+	 */
+
+	for (n = 0; n < adapter->num_rx_queues; n++) {
+		rx_ring = adapter->rx_ring[n];
+		pr_info("------------------------------------\n");
+		pr_info("RX QUEUE INDEX = %d\n", rx_ring->queue_index);
+		pr_info("------------------------------------\n");
+		pr_info("%s%s%s",
+			"R  [desc]      [ PktBuf     A0] ",
+			"[  HeadBuf   DD] [bi->dma       ] [bi->skb       ] ",
+			"<-- Adv Rx Read format\n");
+		pr_info("%s%s%s",
+			"RWB[desc]      [PcsmIpSHl PtRs] ",
+			"[vl er S cks ln] ---------------- [bi->skb       ] ",
+			"<-- Adv Rx Write-Back format\n");
+
+		for (i = 0; i < rx_ring->count; i++) {
+			rx_buffer_info = &rx_ring->rx_buffer_info[i];
+			rx_desc = NGBE_RX_DESC(rx_ring, i);
+			u0 = (struct my_u0 *)rx_desc;
+			staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+			if (staterr & NGBE_RXD_STAT_DD) {
+				/* Descriptor Done */
+				pr_info("RWB[0x%03X]     %016llX "
+					"%016llX ---------------- %p", i,
+					le64_to_cpu(u0->a),
+					le64_to_cpu(u0->b),
+					rx_buffer_info->skb);
+			} else {
+				pr_info("R  [0x%03X]     %016llX "
+					"%016llX %016llX %p", i,
+					le64_to_cpu(u0->a),
+					le64_to_cpu(u0->b),
+					(u64)rx_buffer_info->page_dma,
+					rx_buffer_info->skb);
+
+				if (netif_msg_pktdata(adapter) &&
+				    rx_buffer_info->page_dma) {
+					print_hex_dump(KERN_INFO, "",
+					   DUMP_PREFIX_ADDRESS, 16, 1,
+					   page_address(rx_buffer_info->page) +
+						    rx_buffer_info->page_offset,
+					   ngbe_rx_bufsz(rx_ring), true);
+				}
+			}
+
+			if (i == rx_ring->next_to_use)
+				pr_cont(" NTU\n");
+			else if (i == rx_ring->next_to_clean)
+				pr_cont(" NTC\n");
+			else
+				pr_cont("\n");
+
+		}
+	}
+}
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_ethtool.c b/drivers/net/ethernet/netswift/ngbe/ngbe_ethtool.c
new file mode 100644
index 0000000000000..ca389a7ec4ade
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_ethtool.c
@@ -0,0 +1,2756 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+/* ethtool support for ngbe */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/vmalloc.h>
+#include <linux/highmem.h>
+#include <linux/firmware.h>
+#include <asm/uaccess.h>
+#include <linux/net_tstamp.h>
+
+#include "ngbe.h"
+#include "ngbe_hw.h"
+#include "ngbe_phy.h"
+
+#define NGBE_ALL_RAR_ENTRIES 16
+
+struct ngbe_stats {
+	char stat_string[ETH_GSTRING_LEN];
+	int sizeof_stat;
+	int stat_offset;
+};
+
+#define NGBE_NETDEV_STAT(_net_stat) { \
+	.stat_string = #_net_stat, \
+	.sizeof_stat = sizeof_field(struct net_device_stats, _net_stat), \
+	.stat_offset = offsetof(struct net_device_stats, _net_stat) \
+}
+static const struct ngbe_stats ngbe_gstrings_net_stats[] = {
+	NGBE_NETDEV_STAT(rx_packets),
+	NGBE_NETDEV_STAT(tx_packets),
+	NGBE_NETDEV_STAT(rx_bytes),
+	NGBE_NETDEV_STAT(tx_bytes),
+	NGBE_NETDEV_STAT(rx_errors),
+	NGBE_NETDEV_STAT(tx_errors),
+	NGBE_NETDEV_STAT(rx_dropped),
+	NGBE_NETDEV_STAT(tx_dropped),
+	NGBE_NETDEV_STAT(multicast),
+	NGBE_NETDEV_STAT(collisions),
+	NGBE_NETDEV_STAT(rx_over_errors),
+	NGBE_NETDEV_STAT(rx_crc_errors),
+	NGBE_NETDEV_STAT(rx_frame_errors),
+	NGBE_NETDEV_STAT(rx_fifo_errors),
+	NGBE_NETDEV_STAT(rx_missed_errors),
+	NGBE_NETDEV_STAT(tx_aborted_errors),
+	NGBE_NETDEV_STAT(tx_carrier_errors),
+	NGBE_NETDEV_STAT(tx_fifo_errors),
+	NGBE_NETDEV_STAT(tx_heartbeat_errors),
+};
+
+#define NGBE_STAT(_name, _stat) { \
+	.stat_string = _name, \
+	.sizeof_stat = sizeof_field(struct ngbe_adapter, _stat), \
+	.stat_offset = offsetof(struct ngbe_adapter, _stat) \
+}
+static struct ngbe_stats ngbe_gstrings_stats[] = {
+	NGBE_STAT("rx_pkts_nic", stats.gprc),
+	NGBE_STAT("tx_pkts_nic", stats.gptc),
+	NGBE_STAT("rx_bytes_nic", stats.gorc),
+	NGBE_STAT("tx_bytes_nic", stats.gotc),
+	NGBE_STAT("lsc_int", lsc_int),
+	NGBE_STAT("tx_busy", tx_busy),
+	NGBE_STAT("non_eop_descs", non_eop_descs),
+	NGBE_STAT("broadcast", stats.bprc),
+	NGBE_STAT("rx_no_buffer_count", stats.rnbc[0]),
+	NGBE_STAT("tx_timeout_count", tx_timeout_count),
+	NGBE_STAT("tx_restart_queue", restart_queue),
+	NGBE_STAT("rx_long_length_count", stats.roc),
+	NGBE_STAT("rx_short_length_count", stats.ruc),
+	NGBE_STAT("tx_flow_control_xon", stats.lxontxc),
+	NGBE_STAT("rx_flow_control_xon", stats.lxonrxc),
+	NGBE_STAT("tx_flow_control_xoff", stats.lxofftxc),
+	NGBE_STAT("rx_flow_control_xoff", stats.lxoffrxc),
+	NGBE_STAT("rx_csum_offload_good_count", hw_csum_rx_good),
+	NGBE_STAT("rx_csum_offload_errors", hw_csum_rx_error),
+	NGBE_STAT("alloc_rx_page_failed", alloc_rx_page_failed),
+	NGBE_STAT("alloc_rx_buff_failed", alloc_rx_buff_failed),
+	NGBE_STAT("rx_no_dma_resources", hw_rx_no_dma_resources),
+	NGBE_STAT("os2bmc_rx_by_bmc", stats.o2bgptc),
+	NGBE_STAT("os2bmc_tx_by_bmc", stats.b2ospc),
+	NGBE_STAT("os2bmc_tx_by_host", stats.o2bspc),
+	NGBE_STAT("os2bmc_rx_by_host", stats.b2ogprc),
+	NGBE_STAT("tx_hwtstamp_timeouts", tx_hwtstamp_timeouts),
+	NGBE_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared),
+};
+
+/* ngbe allocates num_tx_queues and num_rx_queues symmetrically so
+ * we set the num_rx_queues to evaluate to num_tx_queues. This is
+ * used because we do not have a good way to get the max number of
+ * rx queues with CONFIG_RPS disabled.
+ */
+#define NGBE_NUM_RX_QUEUES netdev->num_tx_queues
+#define NGBE_NUM_TX_QUEUES netdev->num_tx_queues
+
+#define NGBE_QUEUE_STATS_LEN ( \
+		(NGBE_NUM_TX_QUEUES + NGBE_NUM_RX_QUEUES) * \
+		(sizeof(struct ngbe_queue_stats) / sizeof(u64)))
+#define NGBE_GLOBAL_STATS_LEN  ARRAY_SIZE(ngbe_gstrings_stats)
+#define NGBE_NETDEV_STATS_LEN  ARRAY_SIZE(ngbe_gstrings_net_stats)
+#define NGBE_PB_STATS_LEN ( \
+		(sizeof(((struct ngbe_adapter *)0)->stats.pxonrxc) + \
+		 sizeof(((struct ngbe_adapter *)0)->stats.pxontxc) + \
+		 sizeof(((struct ngbe_adapter *)0)->stats.pxoffrxc) + \
+		 sizeof(((struct ngbe_adapter *)0)->stats.pxofftxc)) \
+		/ sizeof(u64))
+#define NGBE_VF_STATS_LEN \
+	((((struct ngbe_adapter *)netdev_priv(netdev))->num_vfs) * \
+	  (sizeof(struct vf_stats) / sizeof(u64)))
+#define NGBE_STATS_LEN (NGBE_GLOBAL_STATS_LEN + \
+			 NGBE_NETDEV_STATS_LEN + \
+			 NGBE_PB_STATS_LEN + \
+			 NGBE_QUEUE_STATS_LEN + \
+			 NGBE_VF_STATS_LEN)
+
+static const char ngbe_gstrings_test[][ETH_GSTRING_LEN] = {
+	"Register test  (offline)", "Eeprom test    (offline)",
+	"Interrupt test (offline)", "Loopback test  (offline)",
+	"Link test   (on/offline)"
+};
+#define NGBE_TEST_LEN  (sizeof(ngbe_gstrings_test) / ETH_GSTRING_LEN)
+
+#define ngbe_isbackplane(type)  \
+			((type == ngbe_media_type_backplane) ? true : false)
+
+int ngbe_get_link_ksettings(struct net_device *netdev,
+		    struct ethtool_link_ksettings *cmd)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 supported_link = 0;
+	u32 link_speed = 0;
+	bool autoneg = false;
+	u32 supported, advertising;
+	bool link_up = 0;
+
+	ethtool_convert_link_mode_to_legacy_u32(&supported,
+						cmd->link_modes.supported);
+
+	TCALL(hw, mac.ops.get_link_capabilities, &supported_link, &autoneg);
+
+	/* set the supported link speeds */
+	if (supported_link & NGBE_LINK_SPEED_1GB_FULL)
+		supported |= (ngbe_isbackplane(hw->phy.media_type)) ?
+			SUPPORTED_1000baseKX_Full : SUPPORTED_1000baseT_Full;
+	if (supported_link & NGBE_LINK_SPEED_100_FULL)
+		supported |= SUPPORTED_100baseT_Full;
+	if (supported_link & NGBE_LINK_SPEED_10_FULL)
+		supported |= SUPPORTED_10baseT_Full;
+
+	/* default advertised speed if phy.autoneg_advertised isn't set */
+	advertising = supported;
+
+	/* set the advertised speeds */
+	if (hw->phy.autoneg_advertised) {
+		advertising = 0;
+		if (hw->phy.autoneg_advertised & NGBE_LINK_SPEED_100_FULL)
+			advertising |= ADVERTISED_100baseT_Full;
+		if (hw->phy.autoneg_advertised & NGBE_LINK_SPEED_1GB_FULL) {
+			if (supported & SUPPORTED_1000baseKX_Full)
+				advertising |= ADVERTISED_1000baseKX_Full;
+			else
+				advertising |= ADVERTISED_1000baseT_Full;
+		}
+		if (hw->phy.autoneg_advertised & NGBE_LINK_SPEED_10_FULL)
+			advertising |= ADVERTISED_10baseT_Full;
+	} else {
+		/* default modes in case phy.autoneg_advertised isn't set */
+		if (supported_link & NGBE_LINK_SPEED_1GB_FULL)
+			advertising |= ADVERTISED_1000baseT_Full;
+		if (supported_link & NGBE_LINK_SPEED_100_FULL)
+			advertising |= ADVERTISED_100baseT_Full;
+		if (supported_link & NGBE_LINK_SPEED_10_FULL)
+			advertising |= ADVERTISED_10baseT_Full;
+	}
+		supported |= SUPPORTED_Autoneg;
+	if (autoneg) {
+		advertising |= ADVERTISED_Autoneg;
+		autoneg = AUTONEG_ENABLE;
+		cmd->base.autoneg = AUTONEG_ENABLE;
+	} else
+		cmd->base.autoneg = AUTONEG_DISABLE;
+
+	/* Determine the remaining settings based on the PHY type. */
+	switch (adapter->hw.phy.type) {
+	case ngbe_phy_internal:
+	case ngbe_phy_m88e1512:
+	case ngbe_phy_zte:
+		supported |= SUPPORTED_TP;
+		advertising |= ADVERTISED_TP;
+		cmd->base.port = PORT_TP;
+		break;
+	case ngbe_phy_sfp_passive_tyco:
+	case ngbe_phy_sfp_passive_unknown:
+	case ngbe_phy_sfp_ftl:
+	case ngbe_phy_sfp_avago:
+	case ngbe_phy_sfp_intel:
+	case ngbe_phy_sfp_unknown:
+		switch (adapter->hw.phy.sfp_type) {
+			/* SFP+ devices, further checking needed */
+		case ngbe_sfp_type_da_cu:
+		case ngbe_sfp_type_da_cu_core0:
+		case ngbe_sfp_type_da_cu_core1:
+			supported |= SUPPORTED_FIBRE;
+			advertising |= ADVERTISED_FIBRE;
+			cmd->base.port = PORT_DA;
+			break;
+		case ngbe_sfp_type_sr:
+		case ngbe_sfp_type_lr:
+		case ngbe_sfp_type_srlr_core0:
+		case ngbe_sfp_type_srlr_core1:
+		case ngbe_sfp_type_1g_sx_core0:
+		case ngbe_sfp_type_1g_sx_core1:
+		case ngbe_sfp_type_1g_lx_core0:
+		case ngbe_sfp_type_1g_lx_core1:
+			supported |= SUPPORTED_FIBRE;
+			advertising |= ADVERTISED_FIBRE;
+			cmd->base.port = PORT_FIBRE;
+			break;
+		case ngbe_sfp_type_not_present:
+			supported |= SUPPORTED_FIBRE;
+			advertising |= ADVERTISED_FIBRE;
+			cmd->base.port = PORT_NONE;
+			break;
+		case ngbe_sfp_type_1g_cu_core0:
+		case ngbe_sfp_type_1g_cu_core1:
+			supported |= SUPPORTED_TP;
+			advertising |= ADVERTISED_TP;
+			cmd->base.port = PORT_TP;
+			break;
+		case ngbe_sfp_type_unknown:
+		default:
+			supported |= SUPPORTED_FIBRE;
+			advertising |= ADVERTISED_FIBRE;
+			cmd->base.port = PORT_OTHER;
+			break;
+		}
+		break;
+	case ngbe_phy_unknown:
+	case ngbe_phy_generic:
+	case ngbe_phy_sfp_unsupported:
+	default:
+		supported |= SUPPORTED_FIBRE;
+		advertising |= ADVERTISED_FIBRE;
+		cmd->base.port = PORT_OTHER;
+		break;
+	}
+
+	if (!in_interrupt()) {
+		TCALL(hw, mac.ops.check_link, &link_speed, &link_up, false);
+	} else {
+		/*
+		 * this case is a special workaround for RHEL5 bonding
+		 * that calls this routine from interrupt context
+		 */
+		link_speed = adapter->link_speed;
+		link_up = adapter->link_up;
+	}
+
+	supported |= SUPPORTED_Pause;
+
+	switch (hw->fc.requested_mode) {
+	case ngbe_fc_full:
+		advertising |= ADVERTISED_Pause;
+		break;
+	case ngbe_fc_rx_pause:
+		advertising |= ADVERTISED_Pause |
+				     ADVERTISED_Asym_Pause;
+		break;
+	case ngbe_fc_tx_pause:
+		advertising |= ADVERTISED_Asym_Pause;
+		break;
+	default:
+		advertising &= ~(ADVERTISED_Pause |
+				       ADVERTISED_Asym_Pause);
+	}
+
+	if (link_up) {
+		switch (link_speed) {
+		case NGBE_LINK_SPEED_1GB_FULL:
+			cmd->base.speed = SPEED_1000;
+			break;
+		case NGBE_LINK_SPEED_100_FULL:
+			cmd->base.speed = SPEED_100;
+			break;
+		case NGBE_LINK_SPEED_10_FULL:
+			cmd->base.speed = SPEED_10;
+			break;
+		default:
+			break;
+		}
+		cmd->base.duplex = DUPLEX_FULL;
+	} else {
+		cmd->base.speed = -1;
+		cmd->base.duplex = -1;
+	}
+
+	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+						supported);
+	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+						advertising);
+	return 0;
+}
+
+static int ngbe_set_link_ksettings(struct net_device *netdev,
+				const struct ethtool_link_ksettings *cmd)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 advertised, old;
+	s32 err = 0;
+	u32 supported, advertising;
+	ethtool_convert_link_mode_to_legacy_u32(&supported,
+						cmd->link_modes.supported);
+	ethtool_convert_link_mode_to_legacy_u32(&advertising,
+						cmd->link_modes.advertising);
+
+	if ((hw->phy.media_type == ngbe_media_type_copper) ||
+	    (hw->phy.multispeed_fiber)) {
+		/*
+		 * this function does not support duplex forcing, but can
+		 * limit the advertising of the adapter to the specified speed
+		 */
+		if (advertising & ~supported) {
+			return -EINVAL;
+		}
+		old = hw->phy.autoneg_advertised;
+		advertised = 0;
+
+		if (cmd->base.autoneg == AUTONEG_ENABLE) {
+			hw->mac.autoneg = true;
+			if (advertising & ADVERTISED_1000baseT_Full)
+				advertised |= NGBE_LINK_SPEED_1GB_FULL;
+
+			if (advertising & ADVERTISED_100baseT_Full)
+				advertised |= NGBE_LINK_SPEED_100_FULL;
+
+			if (advertising & ADVERTISED_10baseT_Full)
+				advertised |= NGBE_LINK_SPEED_10_FULL;
+
+			if (old == advertised) {
+				return err;
+			}
+		} else {
+			if (cmd->base.duplex == DUPLEX_HALF) {
+				e_err(probe, "unsupported duplex\n");
+				return -EINVAL;
+			}
+
+			switch (cmd->base.speed) {
+			case SPEED_10:
+				advertised = NGBE_LINK_SPEED_10_FULL;
+				break;
+			case SPEED_100:
+				advertised = NGBE_LINK_SPEED_100_FULL;
+				break;
+			case SPEED_1000:
+				advertised = NGBE_LINK_SPEED_1GB_FULL;
+				break;
+			default:
+				e_err(probe, "unsupported speed\n");
+				return -EINVAL;
+			}
+				hw->mac.autoneg = false;
+		}
+
+		hw->mac.autotry_restart = true;
+		err = TCALL(hw, mac.ops.setup_link, advertised, true);
+		if (err) {
+			e_info(probe, "setup link failed with code %d\n", err);
+			TCALL(hw, mac.ops.setup_link, old, true);
+		} else {
+			hw->phy.autoneg_advertised = advertised;
+		}
+	} else {
+		/* in this case we currently only support 1Gb/FULL */
+		u32 speed = cmd->base.speed;
+		if ((cmd->base.autoneg == AUTONEG_ENABLE) ||
+		    (advertising != ADVERTISED_10000baseT_Full) ||
+		    (speed + cmd->base.duplex != SPEED_10000 + DUPLEX_FULL))
+			return -EINVAL;
+	}
+
+	return err;
+}
+
+static void ngbe_get_pauseparam(struct net_device *netdev,
+				 struct ethtool_pauseparam *pause)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+
+	if (!hw->fc.disable_fc_autoneg)
+		pause->autoneg = 1;
+	else
+		pause->autoneg = 0;
+
+	if (hw->fc.current_mode == ngbe_fc_rx_pause) {
+		pause->rx_pause = 1;
+	} else if (hw->fc.current_mode == ngbe_fc_tx_pause) {
+		pause->tx_pause = 1;
+	} else if (hw->fc.current_mode == ngbe_fc_full) {
+		pause->rx_pause = 1;
+		pause->tx_pause = 1;
+	}
+}
+
+static int ngbe_set_pauseparam(struct net_device *netdev,
+				struct ethtool_pauseparam *pause)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+	struct ngbe_fc_info fc = hw->fc;
+
+	fc.disable_fc_autoneg = (pause->autoneg != AUTONEG_ENABLE);
+
+	if ((pause->rx_pause && pause->tx_pause) || pause->autoneg)
+		fc.requested_mode = ngbe_fc_full;
+	else if (pause->rx_pause)
+		fc.requested_mode = ngbe_fc_rx_pause;
+	else if (pause->tx_pause)
+		fc.requested_mode = ngbe_fc_tx_pause;
+	else
+		fc.requested_mode = ngbe_fc_none;
+
+	/* if the thing changed then we'll update and use new autoneg */
+	if (memcmp(&fc, &hw->fc, sizeof(struct ngbe_fc_info))) {
+		hw->fc = fc;
+		if (netif_running(netdev))
+			ngbe_reinit_locked(adapter);
+		else
+			ngbe_reset(adapter);
+	}
+
+	return 0;
+}
+
+static u32 ngbe_get_msglevel(struct net_device *netdev)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	return adapter->msg_enable;
+}
+
+static void ngbe_set_msglevel(struct net_device *netdev, u32 data)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	adapter->msg_enable = data;
+}
+
+static int ngbe_get_regs_len(struct net_device __always_unused *netdev)
+{
+#define NGBE_REGS_LEN  4096
+	return NGBE_REGS_LEN * sizeof(u32);
+}
+
+#define NGBE_GET_STAT(_A_, _R_)        (_A_->stats._R_)
+
+static void ngbe_get_regs(struct net_device *netdev,
+						struct ethtool_regs *regs,
+						void *p)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 *regs_buff = p;
+	u32 i;
+	u32 id = 0;
+
+	memset(p, 0, NGBE_REGS_LEN * sizeof(u32));
+	regs_buff[NGBE_REGS_LEN - 1] = 0x55555555;
+
+	regs->version = hw->revision_id << 16 |
+			hw->device_id;
+
+	/* Global Registers */
+	/* chip control */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_MIS_PWR);//0
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_MIS_CTL);//1
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_MIS_PF_SM);//2
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_MIS_RST);//3
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_MIS_ST);//4
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_MIS_SWSM);//5
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_MIS_RST_ST);//6
+	/* pvt sensor */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TS_CTL);//7
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TS_EN);//8
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TS_ST);//9
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TS_ALARM_THRE);//10
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TS_DALARM_THRE);//11
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TS_INT_EN);//12
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TS_ALARM_ST);//13
+	/* Fmgr Register */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_SPI_CMD);//14
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_SPI_DATA);//15
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_SPI_STATUS);//16
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_SPI_USR_CMD);//17
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_SPI_CMDCFG0);//18
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_SPI_CMDCFG1);//19
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_SPI_ILDR_STATUS);//20
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_SPI_ILDR_SWPTR);//21
+
+	/* Port Registers */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_CFG_PORT_CTL);//22
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_CFG_PORT_ST);//23
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_CFG_EX_VTYPE);//24
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_CFG_TCP_TIME);//25
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_CFG_LED_CTL);//26
+	/* GPIO */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_GPIO_DR);//27
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_GPIO_DDR);//28
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_GPIO_CTL);//29
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_GPIO_INTEN);//30
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_GPIO_INTMASK);//31
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_GPIO_INTSTATUS);//32
+	/* TX TPH */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_CFG_TPH_TDESC);//33
+	/* RX TPH */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_CFG_TPH_RDESC);//34
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_CFG_TPH_RHDR);//35
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_CFG_TPH_RPL);//36
+
+	/* TDMA */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_CTL);//37
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_POOL_TE);//38
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_PB_THRE);//39
+
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_LLQ);//40
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_ETYPE_LB_L);//41
+
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_ETYPE_AS_L);//42
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_MAC_AS_L);//43
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_VLAN_AS_L);//44
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_TCP_FLG_L);//45
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_TCP_FLG_H);//46
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_VLAN_INS(i));//47-54
+	}
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_ETAG_INS(i));//55-62
+	}
+	/* Transmit QOS */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_PBWARB_CTL);//63
+
+	/* statistics */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_DRP_CNT);//64
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_SEC_DRP);//65
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_PKT_CNT);//66
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_BYTE_CNT_L);//67
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_BYTE_CNT_H);//68
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDM_OS2BMC_CNT);//69
+
+	/* RDMA */
+	/* receive control */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDM_ARB_CTL);//70
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDM_POOL_RE);//71
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDM_PF_QDE);//72
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDM_PF_HIDE);//73
+	/* static */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDM_DRP_PKT);//74
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDM_PKT_CNT);//75
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDM_BYTE_CNT_L);//76
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDM_BYTE_CNT_H);//77
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDM_BMC2OS_CNT);//78
+
+	/* RDB */
+	/*flow control */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_RFCV);//79
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_RFCL);//80
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_RFCH);//81
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_RFCRT);//82
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_RFCC);//83
+	/* receive packet buffer */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_PB_CTL);//84
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_PB_SZ);//85
+
+	/* lli interrupt */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_LLI_THRE);//86
+	/* ring assignment */
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_PL_CFG(i));//87-94
+	}
+	for (i = 0; i < 32; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_RSSTBL(i));//95-126
+	}
+	for (i = 0; i < 10; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_RSSRK(i));//127-136
+	}
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_RA_CTL);//137
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_5T_SDP(i));//138-145
+	}
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_5T_CTL0(i));//146-153
+	}
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_5T_CTL1(i));//154-161
+	}
+
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_SYN_CLS);//162
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_ETYPE_CLS(i));//163-170
+	}
+	/* statistics */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_MPCNT);//171
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_PKT_CNT);//172
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_REPLI_CNT);//173
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_DRP_CNT);//174
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_LXONTXC);//175
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_LXOFFTXC);//176
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_PFCMACDAL);//177
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_PFCMACDAH);//178
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RDB_TXSWERR);//179
+
+	/* PSR */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_CTL);//180
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_MAX_SZ);//181
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_VLAN_CTL);//182
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_VM_CTL);//183
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_PKT_CNT);//184
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_MNG_PKT_CNT);//185
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_DBG_DOP_CNT);//186
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_MNG_DOP_CNT);//187
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_VM_FLP_L);//188
+
+	/* vm l2 control */
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_VM_L2CTL(i));//189-196
+	}
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_ETYPE_SWC(i));//197-204
+	}
+	for (i = 0; i < 128; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_MC_TBL(i));//205-332
+	}
+	for (i = 0; i < 128; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_UC_TBL(i));///333-460
+	}
+	for (i = 0; i < 128; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_VLAN_TBL(i));//461-588
+	}
+	/* mac switcher */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_MAC_SWC_AD_L);//589
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_MAC_SWC_AD_H);//590
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_MAC_SWC_VM);//591
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_MAC_SWC_IDX);//592
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_VLAN_SWC);//593
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_VLAN_SWC_VM_L);//594
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_VLAN_SWC_IDX);//595
+
+	/* mirror */
+	for (i = 0; i < 4; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_MR_CTL(i));//596-599
+	}
+	for (i = 0; i < 4; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_MR_VLAN_L(i));//600-603
+	}
+	for (i = 0; i < 4; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_MR_VM_L(i));//604-607
+	}
+	/* 1588 */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_1588_CTL);//608
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_1588_STMPL);//609
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_1588_STMPH);//610
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_1588_ATTRL);//611
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_1588_ATTRH);//612
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_1588_MSGTYPE);//613
+	/* wake up */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_WKUP_CTL);//614
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_WKUP_IPV);//615
+	for (i = 0; i < 4; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_WKUP_IP4TBL(i));//616-619
+	}
+	for (i = 0; i < 4; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_WKUP_IP6TBL(i));//620-623
+	}
+	for (i = 0; i < 16; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_LAN_FLEX_DW_L(i));//624-639
+	}
+	for (i = 0; i < 16; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_LAN_FLEX_DW_H(i));//640-655
+	}
+	for (i = 0; i < 16; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_LAN_FLEX_MSK(i));//656-671
+	}
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PSR_LAN_FLEX_CTL);//672
+
+	/* TDB */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDB_RFCS);//673
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDB_PB_SZ);//674
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDB_PBRARB_CTL);//675
+	/* statistic */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDB_OUT_PKT_CNT);//676
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDB_MNG_PKT_CNT);//677
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDB_LB_PKT_CNT);//678
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TDB_MNG_LARGE_DOP_CNT);//679
+
+	/* TSEC */
+	/* general tsec */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TSEC_CTL);//680
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TSEC_ST);//681
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TSEC_BUF_AF);//682
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TSEC_BUF_AE);//683
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TSEC_MIN_IFG);//684
+	/* 1588 */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TSEC_1588_CTL);//685
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TSEC_1588_STMPL);//686
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TSEC_1588_STMPH);//687
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TSEC_1588_SYSTIML);//688
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TSEC_1588_SYSTIMH);//689
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TSEC_1588_INC);//690
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TSEC_1588_ADJL);//691
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TSEC_1588_ADJH);//692
+
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TSEC_1588_INT_ST);//693
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TSEC_1588_INT_EN);//694
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TSEC_1588_AUX_CTL);//695
+	for (i = 0; i < 4; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TSEC_1588_SDP(i));//696-699
+	}
+
+	/* RSEC */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RSEC_CTL);//700
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RSEC_ST);//701
+	/* mac wrapper */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_MAC_TX_CFG);//702
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_MAC_RX_CFG);//703
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_MAC_PKT_FLT);//704
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_MAC_WDG_TIMEOUT);//705
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_MAC_TX_FLOW_CTRL);//706
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_MAC_RX_FLOW_CTRL);//707
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_MAC_INT_ST);//708
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_MAC_INT_EN);//709
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_RX_FRAME_CNT_GOOD_BAD_LOW);//710
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_TX_FRAME_CNT_GOOD_BAD_LOW);//711
+
+	/* BAR register */
+	/* pf interrupt register */
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_MISC_IC);//712
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_MISC_ICS);//713
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_MISC_IEN);//714
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_GPIE);//715
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_IC);//716
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_ICS);//717
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_IMS);//718
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_IMC);//719
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_ISB_ADDR_L);//720
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_ISB_ADDR_H);//721
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_ITRSEL);//722
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_ITR(i));//723-730
+	}
+	for (i = 0; i < 4; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_IVAR(i));//731-734
+	}
+
+	regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_MISC_IVAR);//735
+	/* pf receive ring register */
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_RR_BAL(i));//736-743
+	}
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_RR_BAH(i));//744-751
+	}
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_RR_WP(i));//752-759
+	}
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_RR_RP(i));//760-767
+	}
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_RR_CFG(i));//768-775
+	}
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_TR_BAL(i));//776-783
+	}
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_TR_BAH(i));//784-791
+	}
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_TR_WP(i));//792-709
+	}
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_TR_RP(i));//800-807
+	}
+	for (i = 0; i < 8; i++) {
+		regs_buff[id++] = NGBE_R32_Q(hw, NGBE_PX_TR_CFG(i));//808-815
+	}
+}
+
+static int ngbe_get_eeprom_len(struct net_device *netdev)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	return adapter->hw.eeprom.word_size * 2;
+}
+
+static int ngbe_get_eeprom(struct net_device *netdev,
+			    struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+	u16 *eeprom_buff;
+	int first_word, last_word, eeprom_len;
+	int ret_val = 0;
+	u16 i;
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+	eeprom_len = last_word - first_word + 1;
+
+	eeprom_buff = kmalloc(sizeof(u16) * eeprom_len, GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	ret_val = TCALL(hw, eeprom.ops.read_buffer, first_word, eeprom_len,
+					   eeprom_buff);
+
+	/* Device's eeprom is always little-endian, word addressable */
+	for (i = 0; i < eeprom_len; i++)
+		le16_to_cpus(&eeprom_buff[i]);
+
+	memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
+	kfree(eeprom_buff);
+
+	return ret_val;
+}
+
+static int ngbe_set_eeprom(struct net_device *netdev,
+			    struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+	u16 *eeprom_buff;
+	void *ptr;
+	int max_len, first_word, last_word, ret_val = 0;
+	u16 i;
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
+		return -EINVAL;
+
+	max_len = hw->eeprom.word_size * 2;
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+	eeprom_buff = kmalloc(max_len, GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	ptr = eeprom_buff;
+
+	if (eeprom->offset & 1) {
+		/*
+		 * need read/modify/write of first changed EEPROM word
+		 * only the second byte of the word is being modified
+		 */
+		ret_val = TCALL(hw, eeprom.ops.read, first_word,
+				&eeprom_buff[0]);
+		if (ret_val)
+			goto err;
+
+		ptr++;
+	}
+	if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
+		/*
+		 * need read/modify/write of last changed EEPROM word
+		 * only the first byte of the word is being modified
+		 */
+		ret_val = TCALL(hw, eeprom.ops.read, last_word,
+				&eeprom_buff[last_word - first_word]);
+		if (ret_val)
+			goto err;
+	}
+
+	/* Device's eeprom is always little-endian, word addressable */
+	for (i = 0; i < last_word - first_word + 1; i++)
+		le16_to_cpus(&eeprom_buff[i]);
+
+	memcpy(ptr, bytes, eeprom->len);
+
+	for (i = 0; i < last_word - first_word + 1; i++)
+		cpu_to_le16s(&eeprom_buff[i]);
+
+	ret_val = TCALL(hw, eeprom.ops.write_buffer, first_word,
+					    last_word - first_word + 1,
+					    eeprom_buff);
+
+	/* Update the checksum */
+	if (ret_val == 0)
+		TCALL(hw, eeprom.ops.update_checksum);
+
+err:
+	kfree(eeprom_buff);
+	return ret_val;
+}
+
+static void ngbe_get_drvinfo(struct net_device *netdev,
+							struct ethtool_drvinfo *drvinfo)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+
+	strncpy(drvinfo->driver, ngbe_driver_name,
+		sizeof(drvinfo->driver) - 1);
+	strncpy(drvinfo->version, ngbe_driver_version,
+		sizeof(drvinfo->version) - 1);
+	strncpy(drvinfo->fw_version, adapter->eeprom_id,
+		sizeof(drvinfo->fw_version));
+	strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
+		sizeof(drvinfo->bus_info) - 1);
+	if (adapter->num_tx_queues <= NGBE_NUM_RX_QUEUES) {
+		drvinfo->n_stats = NGBE_STATS_LEN -
+				   (NGBE_NUM_RX_QUEUES - adapter->num_tx_queues)*
+					(sizeof(struct ngbe_queue_stats) / sizeof(u64))*2;
+	} else {
+		drvinfo->n_stats = NGBE_STATS_LEN;
+	}
+	drvinfo->testinfo_len = NGBE_TEST_LEN;
+	drvinfo->regdump_len = ngbe_get_regs_len(netdev);
+}
+
+static void ngbe_get_ringparam(struct net_device *netdev,
+				struct ethtool_ringparam *ring)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+
+	ring->rx_max_pending = NGBE_MAX_RXD;
+	ring->tx_max_pending = NGBE_MAX_TXD;
+	ring->rx_mini_max_pending = 0;
+	ring->rx_jumbo_max_pending = 0;
+	ring->rx_pending = adapter->rx_ring_count;
+	ring->tx_pending = adapter->tx_ring_count;
+	ring->rx_mini_pending = 0;
+	ring->rx_jumbo_pending = 0;
+}
+
+static int ngbe_set_ringparam(struct net_device *netdev,
+			       struct ethtool_ringparam *ring)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_ring *temp_ring;
+	int i, err = 0;
+	u32 new_rx_count, new_tx_count;
+
+	if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+		return -EINVAL;
+
+	new_tx_count = clamp_t(u32, ring->tx_pending,
+			       NGBE_MIN_TXD, NGBE_MAX_TXD);
+	new_tx_count = ALIGN(new_tx_count, NGBE_REQ_TX_DESCRIPTOR_MULTIPLE);
+
+	new_rx_count = clamp_t(u32, ring->rx_pending,
+			       NGBE_MIN_RXD, NGBE_MAX_RXD);
+	new_rx_count = ALIGN(new_rx_count, NGBE_REQ_RX_DESCRIPTOR_MULTIPLE);
+
+	if ((new_tx_count == adapter->tx_ring_count) &&
+	    (new_rx_count == adapter->rx_ring_count)) {
+		/* nothing to do */
+		return 0;
+	}
+
+	while (test_and_set_bit(__NGBE_RESETTING, &adapter->state))
+		usleep_range(1000, 2000);
+
+	if (!netif_running(adapter->netdev)) {
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			adapter->tx_ring[i]->count = new_tx_count;
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			adapter->rx_ring[i]->count = new_rx_count;
+		adapter->tx_ring_count = new_tx_count;
+		adapter->rx_ring_count = new_rx_count;
+		goto clear_reset;
+	}
+
+	/* allocate temporary buffer to store rings in */
+	i = max_t(int, adapter->num_tx_queues, adapter->num_rx_queues);
+	temp_ring = vmalloc(i * sizeof(struct ngbe_ring));
+
+	if (!temp_ring) {
+		err = -ENOMEM;
+		goto clear_reset;
+	}
+
+	ngbe_down(adapter);
+
+	/*
+	 * Setup new Tx resources and free the old Tx resources in that order.
+	 * We can then assign the new resources to the rings via a memcpy.
+	 * The advantage to this approach is that we are guaranteed to still
+	 * have resources even in the case of an allocation failure.
+	 */
+	if (new_tx_count != adapter->tx_ring_count) {
+		for (i = 0; i < adapter->num_tx_queues; i++) {
+			memcpy(&temp_ring[i], adapter->tx_ring[i],
+			       sizeof(struct ngbe_ring));
+
+			temp_ring[i].count = new_tx_count;
+			err = ngbe_setup_tx_resources(&temp_ring[i]);
+			if (err) {
+				while (i) {
+					i--;
+					ngbe_free_tx_resources(&temp_ring[i]);
+				}
+				goto err_setup;
+			}
+		}
+
+		for (i = 0; i < adapter->num_tx_queues; i++) {
+			ngbe_free_tx_resources(adapter->tx_ring[i]);
+
+			memcpy(adapter->tx_ring[i], &temp_ring[i],
+			       sizeof(struct ngbe_ring));
+		}
+
+		adapter->tx_ring_count = new_tx_count;
+	}
+
+	/* Repeat the process for the Rx rings if needed */
+	if (new_rx_count != adapter->rx_ring_count) {
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			memcpy(&temp_ring[i], adapter->rx_ring[i],
+			       sizeof(struct ngbe_ring));
+
+			temp_ring[i].count = new_rx_count;
+			err = ngbe_setup_rx_resources(&temp_ring[i]);
+			if (err) {
+				while (i) {
+					i--;
+					ngbe_free_rx_resources(&temp_ring[i]);
+				}
+				goto err_setup;
+			}
+		}
+
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			ngbe_free_rx_resources(adapter->rx_ring[i]);
+
+			memcpy(adapter->rx_ring[i], &temp_ring[i],
+			       sizeof(struct ngbe_ring));
+		}
+
+		adapter->rx_ring_count = new_rx_count;
+	}
+
+err_setup:
+	ngbe_up(adapter);
+	vfree(temp_ring);
+clear_reset:
+	clear_bit(__NGBE_RESETTING, &adapter->state);
+	return err;
+}
+
+static int ngbe_get_sset_count(struct net_device *netdev, int sset)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+
+	switch (sset) {
+	case ETH_SS_TEST:
+		return NGBE_TEST_LEN;
+	case ETH_SS_STATS:
+		if (adapter->num_tx_queues <= NGBE_NUM_RX_QUEUES) {
+			return  NGBE_STATS_LEN - (NGBE_NUM_RX_QUEUES - adapter->num_tx_queues)*
+					(sizeof(struct ngbe_queue_stats) / sizeof(u64))*2;
+		} else {
+			return NGBE_STATS_LEN;
+		}
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void ngbe_get_ethtool_stats(struct net_device *netdev,
+				    struct ethtool_stats __always_unused *stats,
+				    u64 *data)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct rtnl_link_stats64 temp;
+	const struct rtnl_link_stats64 *net_stats;
+
+	u64 *queue_stat;
+	int stat_count, k;
+	unsigned int start;
+	struct ngbe_ring *ring;
+	int i, j;
+	char *p;
+
+	ngbe_update_stats(adapter);
+	net_stats = dev_get_stats(netdev, &temp);
+
+	for (i = 0; i < NGBE_NETDEV_STATS_LEN; i++) {
+		p = (char *)net_stats + ngbe_gstrings_net_stats[i].stat_offset;
+		data[i] = (ngbe_gstrings_net_stats[i].sizeof_stat ==
+			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+	}
+	for (j = 0; j < NGBE_GLOBAL_STATS_LEN; j++, i++) {
+		p = (char *)adapter + ngbe_gstrings_stats[j].stat_offset;
+		data[i] = (ngbe_gstrings_stats[j].sizeof_stat ==
+			   sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+	}
+
+	for (j = 0; j < adapter->num_tx_queues; j++) {
+		ring = adapter->tx_ring[j];
+		if (!ring) {
+			data[i++] = 0;
+			data[i++] = 0;
+			continue;
+		}
+
+		do {
+			start = u64_stats_fetch_begin_irq(&ring->syncp);
+			data[i]   = ring->stats.packets;
+			data[i+1] = ring->stats.bytes;
+		} while (u64_stats_fetch_retry_irq(&ring->syncp, start));
+		i += 2;
+	}
+
+	for (j = 0; j < adapter->num_rx_queues; j++) {
+		ring = adapter->rx_ring[j];
+		if (!ring) {
+			data[i++] = 0;
+			data[i++] = 0;
+			continue;
+		}
+
+		do {
+			start = u64_stats_fetch_begin_irq(&ring->syncp);
+			data[i]   = ring->stats.packets;
+			data[i+1] = ring->stats.bytes;
+		} while (u64_stats_fetch_retry_irq(&ring->syncp, start));
+		i += 2;
+	}
+
+	for (j = 0; j < NGBE_MAX_PACKET_BUFFERS; j++) {
+		data[i++] = adapter->stats.pxontxc[j];
+		data[i++] = adapter->stats.pxofftxc[j];
+	}
+	for (j = 0; j < NGBE_MAX_PACKET_BUFFERS; j++) {
+		data[i++] = adapter->stats.pxonrxc[j];
+		data[i++] = adapter->stats.pxoffrxc[j];
+	}
+
+	stat_count = sizeof(struct vf_stats) / sizeof(u64);
+	for (j = 0; j < adapter->num_vfs; j++) {
+		queue_stat = (u64 *)&adapter->vfinfo[j].vfstats;
+		for (k = 0; k < stat_count; k++)
+			data[i + k] = queue_stat[k];
+		queue_stat = (u64 *)&adapter->vfinfo[j].saved_rst_vfstats;
+		for (k = 0; k < stat_count; k++)
+			data[i + k] += queue_stat[k];
+		i += k;
+	}
+}
+
+static void ngbe_get_strings(struct net_device *netdev, u32 stringset,
+			      u8 *data)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	char *p = (char *)data;
+	int i;
+
+	switch (stringset) {
+	case ETH_SS_TEST:
+		memcpy(data, *ngbe_gstrings_test,
+		       NGBE_TEST_LEN * ETH_GSTRING_LEN);
+		break;
+	case ETH_SS_STATS:
+		for (i = 0; i < NGBE_NETDEV_STATS_LEN; i++) {
+			memcpy(p, ngbe_gstrings_net_stats[i].stat_string,
+			       ETH_GSTRING_LEN);
+			p += ETH_GSTRING_LEN;
+		}
+		for (i = 0; i < NGBE_GLOBAL_STATS_LEN; i++) {
+			memcpy(p, ngbe_gstrings_stats[i].stat_string,
+			       ETH_GSTRING_LEN);
+			p += ETH_GSTRING_LEN;
+		}
+		for (i = 0; i < adapter->num_tx_queues; i++) {  /*temp setting2*/
+			sprintf(p, "tx_queue_%u_packets", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "tx_queue_%u_bytes", i);
+			p += ETH_GSTRING_LEN;
+		}
+		for (i = 0; i < adapter->num_rx_queues; i++) {  /*temp setting2*/
+			sprintf(p, "rx_queue_%u_packets", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "rx_queue_%u_bytes", i);
+			p += ETH_GSTRING_LEN;
+		}
+		for (i = 0; i < NGBE_MAX_PACKET_BUFFERS; i++) {
+			sprintf(p, "tx_pb_%u_pxon", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "tx_pb_%u_pxoff", i);
+			p += ETH_GSTRING_LEN;
+		}
+		for (i = 0; i < NGBE_MAX_PACKET_BUFFERS; i++) {
+			sprintf(p, "rx_pb_%u_pxon", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "rx_pb_%u_pxoff", i);
+			p += ETH_GSTRING_LEN;
+		}
+		for (i = 0; i < adapter->num_vfs; i++) {
+			sprintf(p, "VF %d Rx Packets", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "VF %d Rx Bytes", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "VF %d Tx Packets", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "VF %d Tx Bytes", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "VF %d MC Packets", i);
+			p += ETH_GSTRING_LEN;
+		}
+		/* BUG_ON(p - data != NGBE_STATS_LEN * ETH_GSTRING_LEN); */
+		break;
+	}
+}
+
+static int ngbe_link_test(struct ngbe_adapter *adapter, u64 *data)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	bool link_up;
+	u32 link_speed = 0;
+
+	if (NGBE_REMOVED(hw->hw_addr)) {
+		*data = 1;
+		return 1;
+	}
+	*data = 0;
+	TCALL(hw, mac.ops.check_link, &link_speed, &link_up, true);
+	if (link_up)
+		return *data;
+	else
+		*data = 1;
+	return *data;
+}
+
+/* ethtool register test data */
+struct ngbe_reg_test {
+	u32 reg;
+	u8  array_len;
+	u8  test_type;
+	u32 mask;
+	u32 write;
+};
+
+/* In the hardware, registers are laid out either singly, in arrays
+ * spaced 0x40 bytes apart, or in contiguous tables.  We assume
+ * most tests take place on arrays or single registers (handled
+ * as a single-element array) and special-case the tables.
+ * Table tests are always pattern tests.
+ *
+ * We also make provision for some required setup steps by specifying
+ * registers to be written without any read-back testing.
+ */
+
+#define PATTERN_TEST    1
+#define SET_READ_TEST   2
+#define WRITE_NO_TEST   3
+#define TABLE32_TEST    4
+#define TABLE64_TEST_LO 5
+#define TABLE64_TEST_HI 6
+
+/* default sapphire register test */
+static struct ngbe_reg_test reg_test_sapphire[] = {
+	{ NGBE_RDB_RFCL, 1, PATTERN_TEST, 0x8007FFE0, 0x8007FFE0 },
+	{ NGBE_RDB_RFCH, 1, PATTERN_TEST, 0x8007FFE0, 0x8007FFE0 },
+	{ NGBE_PSR_VLAN_CTL, 1, PATTERN_TEST, 0x00000000, 0x00000000 },
+	{ NGBE_PX_RR_BAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFF80 },
+	{ NGBE_PX_RR_BAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ NGBE_PX_RR_CFG(0), 4, WRITE_NO_TEST, 0, NGBE_PX_RR_CFG_RR_EN },
+	{ NGBE_RDB_RFCH, 1, PATTERN_TEST, 0x8007FFE0, 0x8007FFE0 },
+	{ NGBE_RDB_RFCV, 1, PATTERN_TEST, 0xFFFF0000, 0xFFFF0000 },
+	{ NGBE_PX_TR_BAL(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ NGBE_PX_TR_BAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ NGBE_RDB_PB_CTL, 1, SET_READ_TEST, 0x00000001, 0x00000001 },
+	{ NGBE_PSR_MC_TBL(0), 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ .reg = 0 }
+};
+
+
+static bool reg_pattern_test(struct ngbe_adapter *adapter, u64 *data, int reg,
+			     u32 mask, u32 write)
+{
+	u32 pat, val, before;
+	static const u32 test_pattern[] = {
+		0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF
+	};
+
+	if (NGBE_REMOVED(adapter->hw.hw_addr)) {
+		*data = 1;
+		return true;
+	}
+	for (pat = 0; pat < ARRAY_SIZE(test_pattern); pat++) {
+		before = rd32(&adapter->hw, reg);
+		wr32(&adapter->hw, reg, test_pattern[pat] & write);
+		val = rd32(&adapter->hw, reg);
+		if (val != (test_pattern[pat] & write & mask)) {
+			e_err(drv,
+			      "pattern test reg %04X failed: got 0x%08X "
+			      "expected 0x%08X\n",
+			      reg, val, test_pattern[pat] & write & mask);
+			*data = reg;
+			wr32(&adapter->hw, reg, before);
+			return true;
+		}
+		wr32(&adapter->hw, reg, before);
+	}
+	return false;
+}
+
+static bool reg_set_and_check(struct ngbe_adapter *adapter, u64 *data, int reg,
+			      u32 mask, u32 write)
+{
+	u32 val, before;
+
+	if (NGBE_REMOVED(adapter->hw.hw_addr)) {
+		*data = 1;
+		return true;
+	}
+	before = rd32(&adapter->hw, reg);
+	wr32(&adapter->hw, reg, write & mask);
+	val = rd32(&adapter->hw, reg);
+	if ((write & mask) != (val & mask)) {
+		e_err(drv,
+		      "set/check reg %04X test failed: got 0x%08X expected"
+		      "0x%08X\n",
+		      reg, (val & mask), (write & mask));
+		*data = reg;
+		wr32(&adapter->hw, reg, before);
+		return true;
+	}
+	wr32(&adapter->hw, reg, before);
+	return false;
+}
+
+static bool ngbe_reg_test(struct ngbe_adapter *adapter, u64 *data)
+{
+	struct ngbe_reg_test *test;
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 i;
+
+	if (NGBE_REMOVED(hw->hw_addr)) {
+		e_err(drv, "Adapter removed - register test blocked\n");
+		*data = 1;
+		return true;
+	}
+
+	test = reg_test_sapphire;
+
+	/*
+	 * Perform the remainder of the register test, looping through
+	 * the test table until we either fail or reach the null entry.
+	 */
+	while (test->reg) {
+		for (i = 0; i < test->array_len; i++) {
+			bool b = false;
+
+			switch (test->test_type) {
+			case PATTERN_TEST:
+				b = reg_pattern_test(adapter, data,
+						      test->reg + (i * 0x40),
+						      test->mask,
+						      test->write);
+				break;
+			case SET_READ_TEST:
+				b = reg_set_and_check(adapter, data,
+						       test->reg + (i * 0x40),
+						       test->mask,
+						       test->write);
+				break;
+			case WRITE_NO_TEST:
+				wr32(hw, test->reg + (i * 0x40),
+						test->write);
+				break;
+			case TABLE32_TEST:
+				b = reg_pattern_test(adapter, data,
+						      test->reg + (i * 4),
+						      test->mask,
+						      test->write);
+				break;
+			case TABLE64_TEST_LO:
+				b = reg_pattern_test(adapter, data,
+						      test->reg + (i * 8),
+						      test->mask,
+						      test->write);
+				break;
+			case TABLE64_TEST_HI:
+				b = reg_pattern_test(adapter, data,
+						      (test->reg + 4) + (i * 8),
+						      test->mask,
+						      test->write);
+				break;
+			}
+			if (b)
+				return true;
+		}
+		test++;
+	}
+
+	*data = 0;
+	return false;
+}
+
+static bool ngbe_eeprom_test(struct ngbe_adapter *adapter, u64 *data)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 devcap;
+
+	if (TCALL(hw, eeprom.ops.eeprom_chksum_cap_st, NGBE_CALSUM_COMMAND, &devcap)) {
+		*data = 1;
+		return true;
+	} else {
+		*data = 0;
+		return false;
+	}
+}
+
+static irqreturn_t ngbe_test_intr(int __always_unused irq, void *data)
+{
+	struct net_device *netdev = (struct net_device *) data;
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	u64 icr;
+
+	/* get misc interrupt, as cannot get ring interrupt status */
+	icr = ngbe_misc_isb(adapter, NGBE_ISB_VEC1);
+	icr <<= 32;
+	icr |= ngbe_misc_isb(adapter, NGBE_ISB_VEC0);
+
+	adapter->test_icr = icr;
+
+	return IRQ_HANDLED;
+}
+
+static int ngbe_intr_test(struct ngbe_adapter *adapter, u64 *data)
+{
+	struct net_device *netdev = adapter->netdev;
+	u64 mask;
+	u32 i = 0, shared_int = true;
+	u32 irq = adapter->pdev->irq;
+
+	if (NGBE_REMOVED(adapter->hw.hw_addr)) {
+		*data = 1;
+		return -1;
+	}
+	*data = 0;
+
+	/* Hook up test interrupt handler just for this test */
+	if (adapter->msix_entries) {
+		/* NOTE: we don't test MSI-X interrupts here, yet */
+		return 0;
+	} else if (adapter->flags & NGBE_FLAG_MSI_ENABLED) {
+		shared_int = false;
+		if (request_irq(irq, &ngbe_test_intr, 0, netdev->name,
+				netdev)) {
+			*data = 1;
+			return -1;
+		}
+	} else if (!request_irq(irq, &ngbe_test_intr, IRQF_PROBE_SHARED,
+				netdev->name, netdev)) {
+		shared_int = false;
+	} else if (request_irq(irq, &ngbe_test_intr, IRQF_SHARED,
+			       netdev->name, netdev)) {
+		*data = 1;
+		return -1;
+	}
+	e_info(hw, "testing %s interrupt\n",
+	       (shared_int ? "shared" : "unshared"));
+
+	/* Disable all the interrupts */
+	ngbe_irq_disable(adapter);
+	NGBE_WRITE_FLUSH(&adapter->hw);
+	usleep_range(10000, 20000);
+
+	/* Test each interrupt */
+	for (; i < 1; i++) {
+		/* Interrupt to test */
+		mask = 1ULL << i;
+
+		if (!shared_int) {
+			/*
+			 * Disable the interrupts to be reported in
+			 * the cause register and then force the same
+			 * interrupt and see if one gets posted.  If
+			 * an interrupt was posted to the bus, the
+			 * test failed.
+			 */
+			adapter->test_icr = 0;
+			ngbe_intr_disable(&adapter->hw, ~mask);
+			ngbe_intr_trigger(&adapter->hw, mask);
+			NGBE_WRITE_FLUSH(&adapter->hw);
+			usleep_range(10000, 20000);
+
+			if (adapter->test_icr & mask) {
+				*data = 3;
+				break;
+			}
+		}
+
+		/*
+		 * Enable the interrupt to be reported in the cause
+		 * register and then force the same interrupt and see
+		 * if one gets posted.  If an interrupt was not posted
+		 * to the bus, the test failed.
+		 */
+		adapter->test_icr = 0;
+		ngbe_intr_disable(&adapter->hw, NGBE_INTR_ALL);
+		ngbe_intr_trigger(&adapter->hw, mask);
+		NGBE_WRITE_FLUSH(&adapter->hw);
+		usleep_range(10000, 20000);
+
+		if (!(adapter->test_icr & mask)) {
+			*data = 0;
+			break;
+		}
+	}
+
+	/* Disable all the interrupts */
+	ngbe_intr_disable(&adapter->hw, NGBE_INTR_ALL);
+	NGBE_WRITE_FLUSH(&adapter->hw);
+	usleep_range(10000, 20000);
+
+	/* Unhook test interrupt handler */
+	free_irq(irq, netdev);
+
+	return *data;
+}
+
+static void ngbe_free_desc_rings(struct ngbe_adapter *adapter)
+{
+	struct ngbe_ring *tx_ring = &adapter->test_tx_ring;
+	struct ngbe_ring *rx_ring = &adapter->test_rx_ring;
+	struct ngbe_hw *hw = &adapter->hw;
+
+	/* shut down the DMA engines now so they can be reinitialized later */
+
+	/* first Rx */
+	TCALL(hw, mac.ops.disable_rx);
+	ngbe_disable_rx_queue(adapter, rx_ring);
+
+	/* now Tx */
+	wr32(hw, NGBE_PX_TR_CFG(tx_ring->reg_idx), 0);
+
+	wr32m(hw, NGBE_TDM_CTL, NGBE_TDM_CTL_TE, 0);
+
+	ngbe_reset(adapter);
+
+	ngbe_free_tx_resources(&adapter->test_tx_ring);
+	ngbe_free_rx_resources(&adapter->test_rx_ring);
+}
+
+static int ngbe_setup_desc_rings(struct ngbe_adapter *adapter)
+{
+	struct ngbe_ring *tx_ring = &adapter->test_tx_ring;
+	struct ngbe_ring *rx_ring = &adapter->test_rx_ring;
+	struct ngbe_hw *hw = &adapter->hw;
+	int ret_val;
+	int err;
+
+	TCALL(hw, mac.ops.setup_rxpba, 0, 0, PBA_STRATEGY_EQUAL);
+
+	/* Setup Tx descriptor ring and Tx buffers */
+	tx_ring->count = NGBE_DEFAULT_TXD;
+	tx_ring->queue_index = 0;
+	tx_ring->dev = pci_dev_to_dev(adapter->pdev);
+	tx_ring->netdev = adapter->netdev;
+	tx_ring->reg_idx = adapter->tx_ring[0]->reg_idx;
+
+	err = ngbe_setup_tx_resources(tx_ring);
+	if (err)
+		return 1;
+
+	wr32m(&adapter->hw, NGBE_TDM_CTL,
+		NGBE_TDM_CTL_TE, NGBE_TDM_CTL_TE);
+	wr32m(hw, NGBE_TSEC_CTL, 0x2, 0);
+	wr32m(hw, NGBE_RSEC_CTL, 0x2, 0);
+	ngbe_configure_tx_ring(adapter, tx_ring);
+
+
+	/* enable mac transmitter */
+	wr32m(hw, NGBE_MAC_TX_CFG,
+		NGBE_MAC_TX_CFG_TE | NGBE_MAC_TX_CFG_SPEED_MASK,
+		NGBE_MAC_TX_CFG_TE | NGBE_MAC_TX_CFG_SPEED_1G);
+
+	/* Setup Rx Descriptor ring and Rx buffers */
+	rx_ring->count = NGBE_DEFAULT_RXD;
+	rx_ring->queue_index = 0;
+	rx_ring->dev = pci_dev_to_dev(adapter->pdev);
+	rx_ring->netdev = adapter->netdev;
+	rx_ring->reg_idx = adapter->rx_ring[0]->reg_idx;
+
+	err = ngbe_setup_rx_resources(rx_ring);
+	if (err) {
+		ret_val = 4;
+		goto err_nomem;
+	}
+
+	TCALL(hw, mac.ops.disable_rx);
+
+	ngbe_configure_rx_ring(adapter, rx_ring);
+
+	TCALL(hw, mac.ops.enable_rx);
+
+	return 0;
+
+err_nomem:
+	ngbe_free_desc_rings(adapter);
+	return ret_val;
+}
+
+static int ngbe_setup_loopback_test(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 reg_data;
+
+	/* Setup MAC loopback */
+	wr32m(hw, NGBE_MAC_RX_CFG,
+		NGBE_MAC_RX_CFG_LM, NGBE_MAC_RX_CFG_LM);
+
+	reg_data = rd32(hw, NGBE_PSR_CTL);
+	reg_data |= NGBE_PSR_CTL_BAM | NGBE_PSR_CTL_UPE |
+		NGBE_PSR_CTL_MPE | NGBE_PSR_CTL_TPE;
+	wr32(hw, NGBE_PSR_CTL, reg_data);
+
+	wr32(hw, 0x17000,
+		((rd32(hw, 0x17000) |
+		0x00000040U) & ~0x1U));
+
+	wr32(hw, 0x17204, 0x4);
+	wr32(hw, NGBE_PSR_VLAN_CTL,
+		rd32(hw, NGBE_PSR_VLAN_CTL) &
+		~NGBE_PSR_VLAN_CTL_VFE);
+
+	NGBE_WRITE_FLUSH(hw);
+	usleep_range(10000, 20000);
+
+	return 0;
+}
+
+static void ngbe_loopback_cleanup(struct ngbe_adapter *adapter)
+{
+	wr32m(&adapter->hw, NGBE_MAC_RX_CFG,
+		NGBE_MAC_RX_CFG_LM, ~NGBE_MAC_RX_CFG_LM);
+}
+
+
+static void ngbe_create_lbtest_frame(struct sk_buff *skb,
+				      unsigned int frame_size)
+{
+	memset(skb->data, 0xFF, frame_size);
+	frame_size >>= 1;
+	memset(&skb->data[frame_size], 0xAA, frame_size / 2 - 1);
+	memset(&skb->data[frame_size + 10], 0xBE, 1);
+	memset(&skb->data[frame_size + 12], 0xAF, 1);
+}
+
+static bool ngbe_check_lbtest_frame(struct ngbe_rx_buffer *rx_buffer,
+				     unsigned int frame_size)
+{
+	unsigned char *data;
+	bool match = true;
+
+	frame_size >>= 1;
+
+	data = kmap(rx_buffer->page) + rx_buffer->page_offset;
+	if (data[3] != 0xFF ||
+	    data[frame_size + 10] != 0xBE ||
+	    data[frame_size + 12] != 0xAF)
+		match = false;
+
+	kunmap(rx_buffer->page);
+
+	return match;
+}
+
+static u16 ngbe_clean_test_rings(struct ngbe_ring *rx_ring,
+				  struct ngbe_ring *tx_ring,
+				  unsigned int size)
+{
+	union ngbe_rx_desc *rx_desc;
+	struct ngbe_rx_buffer *rx_buffer;
+	struct ngbe_tx_buffer *tx_buffer;
+	const int bufsz = ngbe_rx_bufsz(rx_ring);
+	u16 rx_ntc, tx_ntc, count = 0;
+
+	/* initialize next to clean and descriptor values */
+	rx_ntc = rx_ring->next_to_clean;
+	tx_ntc = tx_ring->next_to_clean;
+	rx_desc = NGBE_RX_DESC(rx_ring, rx_ntc);
+
+	while (ngbe_test_staterr(rx_desc, NGBE_RXD_STAT_DD)) {
+		/* unmap buffer on Tx side */
+		tx_buffer = &tx_ring->tx_buffer_info[tx_ntc];
+		ngbe_unmap_and_free_tx_resource(tx_ring, tx_buffer);
+
+		/* check Rx buffer */
+		rx_buffer = &rx_ring->rx_buffer_info[rx_ntc];
+
+		/* sync Rx buffer for CPU read */
+		dma_sync_single_for_cpu(rx_ring->dev,
+					rx_buffer->page_dma,
+					bufsz,
+					DMA_FROM_DEVICE);
+
+		/* verify contents of skb */
+		if (ngbe_check_lbtest_frame(rx_buffer, size))
+			count++;
+
+		/* sync Rx buffer for device write */
+		dma_sync_single_for_device(rx_ring->dev,
+					   rx_buffer->page_dma,
+					   bufsz,
+					   DMA_FROM_DEVICE);
+
+		/* increment Rx/Tx next to clean counters */
+		rx_ntc++;
+		if (rx_ntc == rx_ring->count)
+			rx_ntc = 0;
+		tx_ntc++;
+		if (tx_ntc == tx_ring->count)
+			tx_ntc = 0;
+
+		/* fetch next descriptor */
+		rx_desc = NGBE_RX_DESC(rx_ring, rx_ntc);
+	}
+
+	/* re-map buffers to ring, store next to clean values */
+	ngbe_alloc_rx_buffers(rx_ring, count);
+	rx_ring->next_to_clean = rx_ntc;
+	tx_ring->next_to_clean = tx_ntc;
+
+	return count;
+}
+
+static int ngbe_run_loopback_test(struct ngbe_adapter *adapter)
+{
+	struct ngbe_ring *tx_ring = &adapter->test_tx_ring;
+	struct ngbe_ring *rx_ring = &adapter->test_rx_ring;
+	int i, j, lc, good_cnt, ret_val = 0;
+	unsigned int size = 1024;
+	netdev_tx_t tx_ret_val;
+	struct sk_buff *skb;
+	u32 flags_orig = adapter->flags;
+
+	/* DCB can modify the frames on Tx */
+	adapter->flags &= ~NGBE_FLAG_DCB_ENABLED;
+
+	/* allocate test skb */
+	skb = alloc_skb(size, GFP_KERNEL);
+	if (!skb)
+		return 11;
+
+	/* place data into test skb */
+	ngbe_create_lbtest_frame(skb, size);
+	skb_put(skb, size);
+
+	/*
+	 * Calculate the loop count based on the largest descriptor ring
+	 * The idea is to wrap the largest ring a number of times using 64
+	 * send/receive pairs during each loop
+	 */
+
+	if (rx_ring->count <= tx_ring->count)
+		lc = ((tx_ring->count / 64) * 2) + 1;
+	else
+		lc = ((rx_ring->count / 64) * 2) + 1;
+
+	for (j = 0; j <= lc; j++) {
+		/* reset count of good packets */
+		good_cnt = 0;
+
+		/* place 64 packets on the transmit queue*/
+		for (i = 0; i < 64; i++) {
+			skb_get(skb);
+			tx_ret_val = ngbe_xmit_frame_ring(skb,
+							   adapter,
+							   tx_ring);
+			if (tx_ret_val == NETDEV_TX_OK)
+				good_cnt++;
+		}
+
+		msleep(10);
+
+		if (good_cnt != 64) {
+			ret_val = 12;
+			break;
+		}
+
+		/* allow 200 milliseconds for packets to go from Tx to Rx */
+		msleep(200);
+
+		good_cnt = ngbe_clean_test_rings(rx_ring, tx_ring, size);
+		if (good_cnt != 64) {
+			ret_val = 13;
+			e_dev_err("ngbe_run_loopback_test: recv_cnt = %d\n", good_cnt);
+			break;
+		}
+	}
+
+	/* free the original skb */
+	kfree_skb(skb);
+	adapter->flags = flags_orig;
+
+	return ret_val;
+}
+
+static int ngbe_loopback_test(struct ngbe_adapter *adapter, u64 *data)
+{
+	*data = ngbe_setup_desc_rings(adapter);
+	if (*data)
+		goto out;
+	*data = ngbe_setup_loopback_test(adapter);
+	if (*data)
+		goto err_loopback;
+	*data = ngbe_run_loopback_test(adapter);
+	if (*data)
+		e_info(hw, "mac loopback testing failed\n");
+	ngbe_loopback_cleanup(adapter);
+
+err_loopback:
+	ngbe_free_desc_rings(adapter);
+out:
+	return *data;
+}
+
+static void ngbe_diag_test(struct net_device *netdev,
+			    struct ethtool_test *eth_test, u64 *data)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	bool if_running = netif_running(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+
+	e_dev_info("ngbe_diag_test: start test\n");
+
+	if (NGBE_REMOVED(hw->hw_addr)) {
+		e_err(hw, "Adapter removed - test blocked\n");
+		data[0] = 1;
+		data[1] = 1;
+		data[2] = 1;
+		data[3] = 1;
+		data[4] = 1;
+		eth_test->flags |= ETH_TEST_FL_FAILED;
+		return;
+	}
+	set_bit(__NGBE_TESTING, &adapter->state);
+	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+		if (adapter->flags & NGBE_FLAG_SRIOV_ENABLED) {
+			int i;
+			for (i = 0; i < adapter->num_vfs; i++) {
+				if (adapter->vfinfo[i].clear_to_send) {
+					e_warn(drv, "Please take active VFS "
+					       "offline and restart the "
+					       "adapter before running NIC "
+					       "diagnostics\n");
+					data[0] = 1;
+					data[1] = 1;
+					data[2] = 1;
+					data[3] = 1;
+					data[4] = 1;
+					eth_test->flags |= ETH_TEST_FL_FAILED;
+					clear_bit(__NGBE_TESTING,
+						  &adapter->state);
+					goto skip_ol_tests;
+				}
+			}
+		}
+
+		/* Offline tests */
+		e_info(hw, "offline testing starting\n");
+
+
+		/* Link test performed before hardware reset so autoneg doesn't
+		 * interfere with test result */
+		if (ngbe_link_test(adapter, &data[4]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		if (if_running)
+			/* indicate we're in test mode */
+			ngbe_close(netdev);
+		else {
+			msleep(20);
+			ngbe_reset(adapter);
+			}
+
+		e_info(hw, "register testing starting\n");
+
+		if (ngbe_reg_test(adapter, &data[0]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		msleep(20);
+		ngbe_reset(adapter);
+		e_info(hw, "eeprom testing starting\n");
+		if (ngbe_eeprom_test(adapter, &data[1]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+		msleep(20);
+
+		ngbe_reset(adapter);
+		e_info(hw, "interrupt testing starting\n");
+		if (ngbe_intr_test(adapter, &data[2]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+	if (!(((hw->subsystem_device_id & OEM_MASK) == OCP_CARD) ||
+		((hw->subsystem_device_id & NCSI_SUP_MASK) == NCSI_SUP))) {
+		/* If SRIOV or VMDq is enabled then skip MAC
+		 * loopback diagnostic. */
+		if (adapter->flags & (NGBE_FLAG_SRIOV_ENABLED |
+				      NGBE_FLAG_VMDQ_ENABLED)) {
+			e_info(hw, "skip MAC loopback diagnostic in VT mode\n");
+			data[3] = 0;
+			goto skip_loopback;
+		}
+
+		e_info(hw, "loopback testing starting\n");
+		ngbe_loopback_test(adapter, &data[3]);
+	}
+
+	data[3] = 0;
+
+skip_loopback:
+		msleep(20);
+		ngbe_reset(adapter);
+
+		/* clear testing bit and return adapter to previous state */
+		clear_bit(__NGBE_TESTING, &adapter->state);
+		if (if_running)
+			ngbe_open(netdev);
+	} else {
+		e_info(hw, "online testing starting\n");
+
+		/* Online tests */
+		if (ngbe_link_test(adapter, &data[4]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		/* Offline tests aren't run; pass by default */
+		data[0] = 0;
+		data[1] = 0;
+		data[2] = 0;
+		data[3] = 0;
+
+		clear_bit(__NGBE_TESTING, &adapter->state);
+	}
+
+skip_ol_tests:
+	msleep_interruptible(4 * 1000);
+}
+
+static int ngbe_wol_exclusion(struct ngbe_adapter *adapter,
+			       struct ethtool_wolinfo *wol)
+{
+	int retval = 0;
+
+	/* WOL not supported for all devices */
+	if (!ngbe_wol_supported(adapter)) {
+		retval = 1;
+		wol->supported = 0;
+	}
+
+	return retval;
+}
+
+static void ngbe_get_wol(struct net_device *netdev,
+			  struct ethtool_wolinfo *wol)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+
+	struct ngbe_hw *hw = &adapter->hw;
+
+	wol->supported = WAKE_UCAST | WAKE_MCAST |
+			 WAKE_BCAST | WAKE_MAGIC;
+	wol->wolopts = 0;
+
+	if (ngbe_wol_exclusion(adapter, wol) ||
+	    !device_can_wakeup(pci_dev_to_dev(adapter->pdev)))
+		return;
+
+	if (adapter->wol & NGBE_PSR_WKUP_CTL_EX)
+		wol->wolopts |= WAKE_UCAST;
+	if (adapter->wol & NGBE_PSR_WKUP_CTL_MC)
+		wol->wolopts |= WAKE_MCAST;
+	if (adapter->wol & NGBE_PSR_WKUP_CTL_BC)
+		wol->wolopts |= WAKE_BCAST;
+	if (adapter->wol & NGBE_PSR_WKUP_CTL_MAG)
+		wol->wolopts |= WAKE_MAGIC;
+
+	if (!((hw->subsystem_device_id & WOL_SUP_MASK) == WOL_SUP))
+		wol->wolopts = 0;
+}
+
+static int ngbe_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 slot = hw->bus.lan_id;
+	u16 value;
+
+	if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+		return -EOPNOTSUPP;
+
+	if (ngbe_wol_exclusion(adapter, wol))
+		return wol->wolopts ? -EOPNOTSUPP : 0;
+	if (!((hw->subsystem_device_id & WOL_SUP_MASK) == WOL_SUP))
+		return -EOPNOTSUPP;
+	adapter->wol = 0;
+
+	if (wol->wolopts & WAKE_UCAST)
+		adapter->wol |= NGBE_PSR_WKUP_CTL_EX;
+	if (wol->wolopts & WAKE_MCAST)
+		adapter->wol |= NGBE_PSR_WKUP_CTL_MC;
+	if (wol->wolopts & WAKE_BCAST)
+		adapter->wol |= NGBE_PSR_WKUP_CTL_BC;
+	if (wol->wolopts & WAKE_MAGIC) {
+		adapter->wol |= NGBE_PSR_WKUP_CTL_MAG;
+		hw->wol_enabled = !!(adapter->wol);
+		wr32(hw, NGBE_PSR_WKUP_CTL, adapter->wol);
+		ngbe_read_ee_hostif(hw, 0x7FE, &value);
+		/*enable wol in shadow ram*/
+		ngbe_write_ee_hostif(hw, 0x7FE, value | (1 << slot));
+		ngbe_write_ee_hostif(hw, 0x7FF, 0x5a5a);
+		device_set_wakeup_enable(pci_dev_to_dev(adapter->pdev), adapter->wol);
+		return 0;
+	}
+
+	ngbe_read_ee_hostif(hw, 0x7FE, &value);
+	/*disable wol in shadow ram*/
+	ngbe_write_ee_hostif(hw, 0x7FE, value & ~(1 << slot));
+	ngbe_write_ee_hostif(hw, 0x7FF, 0x5a5a);
+	return 0;
+}
+
+static int ngbe_nway_reset(struct net_device *netdev)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	if (netif_running(netdev))
+		ngbe_reinit_locked(adapter);
+
+	return 0;
+}
+
+static int ngbe_set_phys_id(struct net_device *netdev,
+			     enum ethtool_phys_id_state state)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		adapter->led_reg = rd32(hw, NGBE_CFG_LED_CTL);
+		return 2;
+
+	case ETHTOOL_ID_ON:
+		TCALL(hw, mac.ops.led_on, NGBE_LED_LINK_1G);
+		break;
+
+	case ETHTOOL_ID_OFF:
+		TCALL(hw, mac.ops.led_off, NGBE_LED_LINK_100M | NGBE_LED_LINK_1G);
+		break;
+
+	case ETHTOOL_ID_INACTIVE:
+		/* Restore LED settings */
+		wr32(&adapter->hw, NGBE_CFG_LED_CTL,
+				adapter->led_reg);
+		break;
+	}
+
+	return 0;
+}
+
+static int ngbe_get_coalesce(struct net_device *netdev,
+			      struct ethtool_coalesce *ec)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+
+	ec->tx_max_coalesced_frames_irq = adapter->tx_work_limit;
+	/* only valid if in constant ITR mode */
+	if (adapter->rx_itr_setting <= 1)
+		ec->rx_coalesce_usecs = adapter->rx_itr_setting;
+	else
+		ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2;
+
+	/* if in mixed tx/rx queues per vector mode, report only rx settings */
+	if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count)
+		return 0;
+
+	/* only valid if in constant ITR mode */
+	if (adapter->tx_itr_setting <= 1)
+		ec->tx_coalesce_usecs = adapter->tx_itr_setting;
+	else
+		ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2;
+
+	return 0;
+}
+
+static int ngbe_set_coalesce(struct net_device *netdev,
+			      struct ethtool_coalesce *ec)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+	struct ngbe_q_vector *q_vector;
+	int i;
+	u16 tx_itr_param, rx_itr_param;
+	u16  tx_itr_prev;
+	bool need_reset = false;
+
+	if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count) {
+		/* reject Tx specific changes in case of mixed RxTx vectors */
+		if (ec->tx_coalesce_usecs)
+			return -EINVAL;
+		tx_itr_prev = adapter->rx_itr_setting;
+	} else {
+		tx_itr_prev = adapter->tx_itr_setting;
+	}
+
+	if (ec->tx_max_coalesced_frames_irq)
+		adapter->tx_work_limit = ec->tx_max_coalesced_frames_irq;
+
+	if ((ec->rx_coalesce_usecs > (NGBE_MAX_EITR >> 2)) ||
+	    (ec->tx_coalesce_usecs > (NGBE_MAX_EITR >> 2)))
+		return -EINVAL;
+
+	if (ec->rx_coalesce_usecs > 1)
+		adapter->rx_itr_setting = ec->rx_coalesce_usecs << 2;
+	else
+		adapter->rx_itr_setting = ec->rx_coalesce_usecs;
+
+	if (adapter->rx_itr_setting == 1)
+		rx_itr_param = NGBE_20K_ITR;
+	else
+		rx_itr_param = adapter->rx_itr_setting;
+
+	if (ec->tx_coalesce_usecs > 1)
+		adapter->tx_itr_setting = ec->tx_coalesce_usecs << 2;
+	else
+		adapter->tx_itr_setting = ec->tx_coalesce_usecs;
+
+	if (adapter->tx_itr_setting == 1)
+		tx_itr_param = NGBE_20K_ITR;
+	else
+		tx_itr_param = adapter->tx_itr_setting;
+
+	/* mixed Rx/Tx */
+	if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count)
+		adapter->tx_itr_setting = adapter->rx_itr_setting;
+
+	/* detect ITR changes that require update of TXDCTL.WTHRESH */
+	if ((adapter->tx_itr_setting != 1) &&
+	    (adapter->tx_itr_setting < NGBE_70K_ITR)) {
+		if ((tx_itr_prev == 1) ||
+		    (tx_itr_prev >= NGBE_70K_ITR))
+			need_reset = true;
+	} else {
+		if ((tx_itr_prev != 1) &&
+		    (tx_itr_prev < NGBE_70K_ITR))
+			need_reset = true;
+	}
+
+	if (adapter->hw.mac.dmac_config.watchdog_timer &&
+	    (!adapter->rx_itr_setting && !adapter->tx_itr_setting)) {
+		e_info(probe,
+		       "Disabling DMA coalescing because interrupt throttling "
+		       "is disabled\n");
+		adapter->hw.mac.dmac_config.watchdog_timer = 0;
+		TCALL(hw, mac.ops.dmac_config);
+	}
+
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		q_vector = adapter->q_vector[i];
+		q_vector->tx.work_limit = adapter->tx_work_limit;
+		q_vector->rx.work_limit = adapter->rx_work_limit;
+		if (q_vector->tx.count && !q_vector->rx.count)
+			/* tx only */
+			q_vector->itr = tx_itr_param;
+		else
+			/* rx only or mixed */
+			q_vector->itr = rx_itr_param;
+		ngbe_write_eitr(q_vector);
+	}
+
+	/*
+	 * do reset here at the end to make sure EITR==0 case is handled
+	 * correctly w.r.t stopping tx, and changing TXDCTL.WTHRESH settings
+	 * also locks in RSC enable/disable which requires reset
+	 */
+	if (need_reset)
+		ngbe_do_reset(netdev);
+
+	return 0;
+}
+
+static int ngbe_get_rss_hash_opts(struct ngbe_adapter *adapter,
+				   struct ethtool_rxnfc *cmd)
+{
+	cmd->data = 0;
+
+	/* Report default options for RSS on ngbe */
+	switch (cmd->flow_type) {
+	case TCP_V4_FLOW:
+		cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+		/* fall through */
+	case UDP_V4_FLOW:
+		if (adapter->flags2 & NGBE_FLAG2_RSS_FIELD_IPV4_UDP)
+			cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+		/* fall through */
+	case SCTP_V4_FLOW:
+	case AH_ESP_V4_FLOW:
+	case AH_V4_FLOW:
+	case ESP_V4_FLOW:
+	case IPV4_FLOW:
+		cmd->data |= RXH_IP_SRC | RXH_IP_DST;
+		break;
+	case TCP_V6_FLOW:
+		cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+		/* fall through */
+	case UDP_V6_FLOW:
+		if (adapter->flags2 & NGBE_FLAG2_RSS_FIELD_IPV6_UDP)
+			cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+		/* fall through */
+	case SCTP_V6_FLOW:
+	case AH_ESP_V6_FLOW:
+	case AH_V6_FLOW:
+	case ESP_V6_FLOW:
+	case IPV6_FLOW:
+		cmd->data |= RXH_IP_SRC | RXH_IP_DST;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ngbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
+			   u32 *rule_locs)
+{
+	struct ngbe_adapter *adapter = netdev_priv(dev);
+	int ret = -EOPNOTSUPP;
+
+	switch (cmd->cmd) {
+	case ETHTOOL_GRXRINGS:
+		cmd->data = adapter->num_rx_queues;
+		ret = 0;
+		break;
+	case ETHTOOL_GRXCLSRLCNT:
+		ret = 0;
+		break;
+	case ETHTOOL_GRXCLSRULE:
+		break;
+	case ETHTOOL_GRXCLSRLALL:
+		break;
+	case ETHTOOL_GRXFH:
+		ret = ngbe_get_rss_hash_opts(adapter, cmd);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+#define UDP_RSS_FLAGS (NGBE_FLAG2_RSS_FIELD_IPV4_UDP | \
+		       NGBE_FLAG2_RSS_FIELD_IPV6_UDP)
+static int ngbe_set_rss_hash_opt(struct ngbe_adapter *adapter,
+				  struct ethtool_rxnfc *nfc)
+{
+	u32 flags2 = adapter->flags2;
+
+	/*
+	 * RSS does not support anything other than hashing
+	 * to queues on src and dst IPs and ports
+	 */
+	if (nfc->data & ~(RXH_IP_SRC | RXH_IP_DST |
+			  RXH_L4_B_0_1 | RXH_L4_B_2_3))
+		return -EINVAL;
+
+	switch (nfc->flow_type) {
+	case TCP_V4_FLOW:
+	case TCP_V6_FLOW:
+		if (!(nfc->data & RXH_IP_SRC) ||
+		    !(nfc->data & RXH_IP_DST) ||
+		    !(nfc->data & RXH_L4_B_0_1) ||
+		    !(nfc->data & RXH_L4_B_2_3))
+			return -EINVAL;
+		break;
+	case UDP_V4_FLOW:
+		if (!(nfc->data & RXH_IP_SRC) ||
+		    !(nfc->data & RXH_IP_DST))
+			return -EINVAL;
+		switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) {
+		case 0:
+			flags2 &= ~NGBE_FLAG2_RSS_FIELD_IPV4_UDP;
+			break;
+		case (RXH_L4_B_0_1 | RXH_L4_B_2_3):
+			flags2 |= NGBE_FLAG2_RSS_FIELD_IPV4_UDP;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case UDP_V6_FLOW:
+		if (!(nfc->data & RXH_IP_SRC) ||
+		    !(nfc->data & RXH_IP_DST))
+			return -EINVAL;
+		switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) {
+		case 0:
+			flags2 &= ~NGBE_FLAG2_RSS_FIELD_IPV6_UDP;
+			break;
+		case (RXH_L4_B_0_1 | RXH_L4_B_2_3):
+			flags2 |= NGBE_FLAG2_RSS_FIELD_IPV6_UDP;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case AH_ESP_V4_FLOW:
+	case AH_V4_FLOW:
+	case ESP_V4_FLOW:
+	case SCTP_V4_FLOW:
+	case AH_ESP_V6_FLOW:
+	case AH_V6_FLOW:
+	case ESP_V6_FLOW:
+	case SCTP_V6_FLOW:
+		if (!(nfc->data & RXH_IP_SRC) ||
+		    !(nfc->data & RXH_IP_DST) ||
+		    (nfc->data & RXH_L4_B_0_1) ||
+		    (nfc->data & RXH_L4_B_2_3))
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* if we changed something we need to update flags */
+	if (flags2 != adapter->flags2) {
+		struct ngbe_hw *hw = &adapter->hw;
+		u32 mrqc;
+
+		mrqc = rd32(hw, NGBE_RDB_RA_CTL);
+
+		if ((flags2 & UDP_RSS_FLAGS) &&
+		    !(adapter->flags2 & UDP_RSS_FLAGS))
+			e_warn(drv, "enabling UDP RSS: fragmented packets"
+			       " may arrive out of order to the stack above\n");
+
+		adapter->flags2 = flags2;
+
+		/* Perform hash on these packet types */
+		mrqc |= NGBE_RDB_RA_CTL_RSS_IPV4
+		      | NGBE_RDB_RA_CTL_RSS_IPV4_TCP
+		      | NGBE_RDB_RA_CTL_RSS_IPV6
+		      | NGBE_RDB_RA_CTL_RSS_IPV6_TCP;
+
+		mrqc &= ~(NGBE_RDB_RA_CTL_RSS_IPV4_UDP |
+			  NGBE_RDB_RA_CTL_RSS_IPV6_UDP);
+
+		if (flags2 & NGBE_FLAG2_RSS_FIELD_IPV4_UDP)
+			mrqc |= NGBE_RDB_RA_CTL_RSS_IPV4_UDP;
+
+		if (flags2 & NGBE_FLAG2_RSS_FIELD_IPV6_UDP)
+			mrqc |= NGBE_RDB_RA_CTL_RSS_IPV6_UDP;
+
+		wr32(hw, NGBE_RDB_RA_CTL, mrqc);
+	}
+
+	return 0;
+}
+
+static int ngbe_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
+{
+	struct ngbe_adapter *adapter = netdev_priv(dev);
+	int ret = -EOPNOTSUPP;
+
+	switch (cmd->cmd) {
+	case ETHTOOL_SRXCLSRLINS:
+		break;
+	case ETHTOOL_SRXCLSRLDEL:
+		break;
+	case ETHTOOL_SRXFH:
+		ret = ngbe_set_rss_hash_opt(adapter, cmd);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static int ngbe_rss_indir_tbl_max(struct ngbe_adapter *adapter)
+{
+	return 64;
+}
+
+static u32 ngbe_get_rxfh_key_size(struct net_device *netdev)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+
+	return sizeof(adapter->rss_key);
+}
+
+static u32 ngbe_rss_indir_size(struct net_device *netdev)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+
+	return ngbe_rss_indir_tbl_entries(adapter);
+}
+
+static void ngbe_get_reta(struct ngbe_adapter *adapter, u32 *indir)
+{
+	int i, reta_size = ngbe_rss_indir_tbl_entries(adapter);
+
+	for (i = 0; i < reta_size; i++)
+		indir[i] = adapter->rss_indir_tbl[i];
+}
+
+static int ngbe_get_rxfh(struct net_device *netdev, u32 *indir, u8 *key,
+			  u8 *hfunc)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+
+	if (hfunc)
+		*hfunc = ETH_RSS_HASH_TOP;
+
+	if (indir)
+		ngbe_get_reta(adapter, indir);
+
+	if (key)
+		memcpy(key, adapter->rss_key, ngbe_get_rxfh_key_size(netdev));
+
+	return 0;
+}
+
+static int ngbe_set_rxfh(struct net_device *netdev, const u32 *indir,
+			  const u8 *key, const u8 hfunc)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	int i;
+	u32 reta_entries = ngbe_rss_indir_tbl_entries(adapter);
+
+	if (hfunc)
+		return -EINVAL;
+
+	/* Fill out the redirection table */
+	if (indir) {
+		int max_queues = min_t(int, adapter->num_rx_queues,
+				       ngbe_rss_indir_tbl_max(adapter));
+
+		/*Allow at least 2 queues w/ SR-IOV.*/
+		if ((adapter->flags & NGBE_FLAG_SRIOV_ENABLED) &&
+		    (max_queues < 2))
+			max_queues = 2;
+
+		/* Verify user input. */
+		for (i = 0; i < reta_entries; i++)
+			if (indir[i] >= max_queues)
+				return -EINVAL;
+
+		for (i = 0; i < reta_entries; i++)
+			adapter->rss_indir_tbl[i] = indir[i];
+	}
+
+	/* Fill out the rss hash key */
+	if (key)
+		memcpy(adapter->rss_key, key, ngbe_get_rxfh_key_size(netdev));
+
+	ngbe_store_reta(adapter);
+
+	return 0;
+}
+
+static int ngbe_get_ts_info(struct net_device *dev,
+			     struct ethtool_ts_info *info)
+{
+	struct ngbe_adapter *adapter = netdev_priv(dev);
+
+	/* we always support timestamping disabled */
+	info->rx_filters = 1 << HWTSTAMP_FILTER_NONE;
+
+	info->so_timestamping =
+		SOF_TIMESTAMPING_TX_SOFTWARE |
+		SOF_TIMESTAMPING_RX_SOFTWARE |
+		SOF_TIMESTAMPING_SOFTWARE |
+		SOF_TIMESTAMPING_TX_HARDWARE |
+		SOF_TIMESTAMPING_RX_HARDWARE |
+		SOF_TIMESTAMPING_RAW_HARDWARE;
+
+	if (adapter->ptp_clock)
+		info->phc_index = ptp_clock_index(adapter->ptp_clock);
+	else
+		info->phc_index = -1;
+
+	info->tx_types =
+		(1 << HWTSTAMP_TX_OFF) |
+		(1 << HWTSTAMP_TX_ON);
+
+	info->rx_filters |=
+		(1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) |
+		(1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) |
+		(1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) |
+		(1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) |
+		(1 << HWTSTAMP_FILTER_PTP_V2_SYNC) |
+		(1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) |
+		(1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) |
+		(1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ) |
+		(1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) |
+		(1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) |
+		(1 << HWTSTAMP_FILTER_PTP_V2_EVENT);
+
+	return 0;
+}
+
+static unsigned int ngbe_max_channels(struct ngbe_adapter *adapter)
+{
+	unsigned int max_combined;
+	u8 tcs = netdev_get_num_tc(adapter->netdev);
+
+	if (!(adapter->flags & NGBE_FLAG_MSIX_ENABLED)) {
+		/* We only support one q_vector without MSI-X */
+		max_combined = 1;
+	} else if (adapter->flags & NGBE_FLAG_SRIOV_ENABLED) {
+		/* SR-IOV currently only allows one queue on the PF */
+		max_combined = 1;
+	} else if (tcs > 1) {
+		/* For DCB report channels per traffic class */
+		if (tcs > 4) {
+			/* 8 TC w/ 8 queues per TC */
+			max_combined = 8;
+		} else {
+			/* 4 TC w/ 16 queues per TC */
+			max_combined = 16;
+		}
+	} else if (adapter->atr_sample_rate) {
+		/* support up to 64 queues with ATR */
+		max_combined = NGBE_MAX_FDIR_INDICES;
+	} else {
+		/* support up to max allowed queues with RSS */
+		max_combined = ngbe_max_rss_indices(adapter);
+	}
+
+	return max_combined;
+}
+
+static void ngbe_get_channels(struct net_device *dev,
+			       struct ethtool_channels *ch)
+{
+	struct ngbe_adapter *adapter = netdev_priv(dev);
+
+	/* report maximum channels */
+	ch->max_combined = ngbe_max_channels(adapter);
+
+	/* report info for other vector */
+	if (adapter->flags & NGBE_FLAG_MSIX_ENABLED) {
+		ch->max_other = NON_Q_VECTORS;
+		ch->other_count = NON_Q_VECTORS;
+	}
+
+	/* record RSS queues */
+	ch->combined_count = adapter->ring_feature[RING_F_RSS].indices;
+
+	/* nothing else to report if RSS is disabled */
+	if (ch->combined_count == 1)
+		return;
+
+	/* we do not support ATR queueing if SR-IOV is enabled */
+	if (adapter->flags & NGBE_FLAG_SRIOV_ENABLED)
+		return;
+
+	/* same thing goes for being DCB enabled */
+	if (netdev_get_num_tc(dev) > 1)
+		return;
+
+	/* if ATR is disabled we can exit */
+	if (!adapter->atr_sample_rate)
+		return;
+
+}
+
+static int ngbe_set_channels(struct net_device *dev,
+			      struct ethtool_channels *ch)
+{
+	struct ngbe_adapter *adapter = netdev_priv(dev);
+	unsigned int count = ch->combined_count;
+	u8 max_rss_indices = ngbe_max_rss_indices(adapter);
+
+	/* verify they are not requesting separate vectors */
+	if (!count || ch->rx_count || ch->tx_count)
+		return -EINVAL;
+
+	/* verify other_count has not changed */
+	if (ch->other_count != NON_Q_VECTORS)
+		return -EINVAL;
+
+	/* verify the number of channels does not exceed hardware limits */
+	if (count > ngbe_max_channels(adapter))
+		return -EINVAL;
+
+	/* cap RSS limit */
+	if (count > max_rss_indices)
+		count = max_rss_indices;
+	adapter->ring_feature[RING_F_RSS].limit = count;
+
+	/* use setup TC to update any traffic class queue mapping */
+	return ngbe_setup_tc(dev, netdev_get_num_tc(dev));
+}
+
+static int ngbe_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
+{
+	return 0;
+}
+
+static int ngbe_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+	struct ethtool_eee eee_data;
+	s32 ret_val;
+
+	if (!(hw->mac.ops.setup_eee &&
+	    (adapter->flags2 & NGBE_FLAG2_EEE_CAPABLE)))
+		return -EOPNOTSUPP;
+
+	memset(&eee_data, 0, sizeof(struct ethtool_eee));
+
+	ret_val = ngbe_get_eee(netdev, &eee_data);
+	if (ret_val)
+		return ret_val;
+
+	if (eee_data.eee_enabled && !edata->eee_enabled) {
+		if (eee_data.tx_lpi_enabled != edata->tx_lpi_enabled) {
+			e_dev_err("Setting EEE tx-lpi is not supported\n");
+			return -EINVAL;
+		}
+
+		if (eee_data.tx_lpi_timer != edata->tx_lpi_timer) {
+			e_dev_err("Setting EEE Tx LPI timer is not "
+				  "supported\n");
+			return -EINVAL;
+		}
+
+		if (eee_data.advertised != edata->advertised) {
+			e_dev_err("Setting EEE advertised speeds is not "
+				  "supported\n");
+			return -EINVAL;
+		}
+
+	}
+
+	if (eee_data.eee_enabled != edata->eee_enabled) {
+
+		if (edata->eee_enabled)
+			adapter->flags2 |= NGBE_FLAG2_EEE_ENABLED;
+		else
+			adapter->flags2 &= ~NGBE_FLAG2_EEE_ENABLED;
+
+		/* reset link */
+		if (netif_running(netdev))
+			ngbe_reinit_locked(adapter);
+		else
+			ngbe_reset(adapter);
+	}
+
+	return 0;
+}
+
+static int ngbe_set_flash(struct net_device *netdev, struct ethtool_flash *ef)
+{
+	int ret;
+	const struct firmware *fw;
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+
+	ret = request_firmware(&fw, ef->data, &netdev->dev);
+	if (ret < 0)
+		return ret;
+
+	if (ef->region == 0) {
+		ret = ngbe_upgrade_flash(&adapter->hw, ef->region,
+								fw->data, fw->size);
+	} else {
+		if (ngbe_mng_present(&adapter->hw)) {
+			ret = ngbe_upgrade_flash_hostif(&adapter->hw, ef->region,
+											fw->data, fw->size);
+		} else
+			ret = -EOPNOTSUPP;
+	}
+
+	release_firmware(fw);
+	if (!ret)
+		dev_info(&netdev->dev,
+			 "loaded firmware %s, reboot to make firmware work\n", ef->data);
+	return ret;
+}
+
+
+static struct ethtool_ops ngbe_ethtool_ops = {
+	.get_link_ksettings = ngbe_get_link_ksettings,
+	.set_link_ksettings = ngbe_set_link_ksettings,
+	.get_drvinfo            = ngbe_get_drvinfo,
+	.get_regs_len           = ngbe_get_regs_len,
+	.get_regs               = ngbe_get_regs,
+	.get_wol                = ngbe_get_wol,
+	.set_wol                = ngbe_set_wol,
+	.nway_reset             = ngbe_nway_reset,
+	.get_link               = ethtool_op_get_link,
+	.get_eeprom_len         = ngbe_get_eeprom_len,
+	.get_eeprom             = ngbe_get_eeprom,
+	.set_eeprom             = ngbe_set_eeprom,
+	.get_ringparam          = ngbe_get_ringparam,
+	.set_ringparam          = ngbe_set_ringparam,
+	.get_pauseparam         = ngbe_get_pauseparam,
+	.set_pauseparam         = ngbe_set_pauseparam,
+	.get_msglevel           = ngbe_get_msglevel,
+	.set_msglevel           = ngbe_set_msglevel,
+	.self_test              = ngbe_diag_test,
+	.get_strings            = ngbe_get_strings,
+	.set_phys_id            = ngbe_set_phys_id,
+	.get_sset_count         = ngbe_get_sset_count,
+	.get_ethtool_stats      = ngbe_get_ethtool_stats,
+	.get_coalesce           = ngbe_get_coalesce,
+	.set_coalesce           = ngbe_set_coalesce,
+	.get_rxnfc              = ngbe_get_rxnfc,
+	.set_rxnfc              = ngbe_set_rxnfc,
+	.get_eee                = ngbe_get_eee,
+	.set_eee                = ngbe_set_eee,
+	.get_channels           = ngbe_get_channels,
+	.set_channels           = ngbe_set_channels,
+	.get_ts_info            = ngbe_get_ts_info,
+	.get_rxfh_indir_size    = ngbe_rss_indir_size,
+	.get_rxfh_key_size      = ngbe_get_rxfh_key_size,
+	.get_rxfh               = ngbe_get_rxfh,
+	.set_rxfh               = ngbe_set_rxfh,
+	.flash_device           = ngbe_set_flash,
+};
+
+void ngbe_set_ethtool_ops(struct net_device *netdev)
+{
+	netdev->ethtool_ops = &ngbe_ethtool_ops;
+}
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_hw.c b/drivers/net/ethernet/netswift/ngbe/ngbe_hw.c
new file mode 100644
index 0000000000000..73b8a328c267d
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_hw.c
@@ -0,0 +1,5047 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+
+#include "ngbe_type.h"
+#include "ngbe_hw.h"
+#include "ngbe_phy.h"
+#include "ngbe.h"
+
+#define NGBE_SP_MAX_TX_QUEUES  8
+#define NGBE_SP_MAX_RX_QUEUES  8
+#define NGBE_SP_RAR_ENTRIES    32
+#define NGBE_SP_MC_TBL_SIZE    128
+#define NGBE_SP_VFT_TBL_SIZE   128
+#define NGBE_SP_RX_PB_SIZE     42
+
+STATIC s32 ngbe_get_eeprom_semaphore(struct ngbe_hw *hw);
+STATIC void ngbe_release_eeprom_semaphore(struct ngbe_hw *hw);
+STATIC s32 ngbe_mta_vector(struct ngbe_hw *hw, u8 *mc_addr);
+
+STATIC s32 ngbe_setup_copper_link(struct ngbe_hw *hw,
+					 u32 speed,
+					 bool need_restart_AN);
+s32 ngbe_check_mac_link(struct ngbe_hw *hw, u32 *speed,
+				  bool *link_up, bool link_up_wait_to_complete);
+s32 ngbe_check_mac_link_mdi(struct ngbe_hw *hw,
+							u32 *speed,
+							bool *link_up,
+							bool link_up_wait_to_complete);
+s32 ngbe_check_mac_link_yt8521s(struct ngbe_hw *hw,
+							u32 *speed,
+							bool *link_up,
+							bool link_up_wait_to_complete);
+
+u32 ngbe_rd32_epcs(struct ngbe_hw *hw, u32 addr)
+{
+	unsigned int portRegOffset;
+	u32 data;
+	/* Set the LAN port indicator to portRegOffset[1] */
+	/* 1st, write the regOffset to IDA_ADDR register */
+	portRegOffset = NGBE_XPCS_IDA_ADDR;
+	wr32(hw, portRegOffset, addr);
+
+	/* 2nd, read the data from IDA_DATA register */
+	portRegOffset = NGBE_XPCS_IDA_DATA;
+	data = rd32(hw, portRegOffset);
+
+	return data;
+}
+
+void ngbe_wr32_ephy(struct ngbe_hw *hw, u32 addr, u32 data)
+{
+	unsigned int portRegOffset;
+
+	/* Set the LAN port indicator to portRegOffset[1] */
+	/* 1st, write the regOffset to IDA_ADDR register */
+	portRegOffset = NGBE_ETHPHY_IDA_ADDR;
+	wr32(hw, portRegOffset, addr);
+
+	/* 2nd, read the data from IDA_DATA register */
+	portRegOffset = NGBE_ETHPHY_IDA_DATA;
+	wr32(hw, portRegOffset, data);
+}
+
+void ngbe_wr32_epcs(struct ngbe_hw *hw, u32 addr, u32 data)
+{
+	unsigned int portRegOffset;
+
+	/* Set the LAN port indicator to portRegOffset[1] */
+	/* 1st, write the regOffset to IDA_ADDR register */
+	portRegOffset = NGBE_XPCS_IDA_ADDR;
+	wr32(hw, portRegOffset, addr);
+
+	/* 2nd, read the data from IDA_DATA register */
+	portRegOffset = NGBE_XPCS_IDA_DATA;
+	wr32(hw, portRegOffset, data);
+}
+
+/**
+ *  ngbe_get_pcie_msix_count - Gets MSI-X vector count
+ *  @hw: pointer to hardware structure
+ *
+ *  Read PCIe configuration space, and get the MSI-X vector count from
+ *  the capabilities table.
+ **/
+u16 ngbe_get_pcie_msix_count(struct ngbe_hw *hw)
+{
+	u16 msix_count = 1;
+	u16 max_msix_count;
+	u32 pos;
+
+	DEBUGFUNC("\n");
+
+	/* ??? max_msix_count for emerald */
+	max_msix_count = NGBE_MAX_MSIX_VECTORS_EMERALD;
+	pos = pci_find_capability(((struct ngbe_adapter *)hw->back)->pdev,
+								PCI_CAP_ID_MSIX);
+	if (!pos)
+		return msix_count;
+	pci_read_config_word(((struct ngbe_adapter *)hw->back)->pdev,
+			pos + PCI_MSIX_FLAGS, &msix_count);
+
+	if (NGBE_REMOVED(hw->hw_addr))
+		msix_count = 0;
+	msix_count &= NGBE_PCIE_MSIX_TBL_SZ_MASK;
+
+	/* MSI-X count is zero-based in HW */
+	msix_count++;
+
+	if (msix_count > max_msix_count)
+		msix_count = max_msix_count;
+
+	return msix_count;
+}
+
+/**
+ *  ngbe_init_hw - Generic hardware initialization
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize the hardware by resetting the hardware, filling the bus info
+ *  structure and media type, clears all on chip counters, initializes receive
+ *  address registers, multicast table, VLAN filter table, calls routine to set
+ *  up link and flow control settings, and leaves transmit and receive units
+ *  disabled and uninitialized
+ **/
+s32 ngbe_init_hw(struct ngbe_hw *hw)
+{
+	s32 status;
+
+	DEBUGFUNC("\n");
+
+	/* Reset the hardware */
+	status = TCALL(hw, mac.ops.reset_hw);
+
+	if (status == 0) {
+		/* Start the HW */
+		status = TCALL(hw, mac.ops.start_hw);
+	}
+
+	return status;
+}
+
+
+/**
+ *  ngbe_clear_hw_cntrs - Generic clear hardware counters
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears all hardware statistics counters by reading them from the hardware
+ *  Statistics counters are clear on read.
+ **/
+s32 ngbe_clear_hw_cntrs(struct ngbe_hw *hw)
+{
+	u16 i = 0;
+
+	DEBUGFUNC("\n");
+
+	rd32(hw, NGBE_RX_CRC_ERROR_FRAMES_LOW);
+	rd32(hw, NGBE_RX_LEN_ERROR_FRAMES_LOW);
+	rd32(hw, NGBE_RDB_LXONTXC);
+	rd32(hw, NGBE_RDB_LXOFFTXC);
+	/* ??? 1e0c not found */
+	/* rd32(hw, NGBE_MAC_LXONRXC); */
+	rd32(hw, NGBE_MAC_LXOFFRXC);
+
+	for (i = 0; i < 8; i++) {
+	/* ??? move 16? */
+		wr32m(hw, NGBE_MMC_CONTROL, NGBE_MMC_CONTROL_UP, i<<16);
+		rd32(hw, NGBE_MAC_PXOFFRXC);
+	}
+
+	for (i = 0; i < 8; i++) {
+		wr32(hw, NGBE_PX_MPRC(i), 0);
+	}
+	/* BPRC */
+
+	rd32(hw, NGBE_PX_GPRC);
+	rd32(hw, NGBE_PX_GPTC);
+	rd32(hw, NGBE_PX_GORC_MSB);
+	rd32(hw, NGBE_PX_GOTC_MSB);
+
+	rd32(hw, NGBE_RX_BC_FRAMES_GOOD_LOW);
+	rd32(hw, NGBE_RX_UNDERSIZE_FRAMES_GOOD);
+	rd32(hw, NGBE_RX_OVERSIZE_FRAMES_GOOD);
+	rd32(hw, NGBE_RX_FRAME_CNT_GOOD_BAD_LOW);
+	rd32(hw, NGBE_TX_FRAME_CNT_GOOD_BAD_LOW);
+	rd32(hw, NGBE_TX_MC_FRAMES_GOOD_LOW);
+	rd32(hw, NGBE_TX_BC_FRAMES_GOOD_LOW);
+	rd32(hw, NGBE_RDM_DRP_PKT);
+	return 0;
+}
+
+/**
+ *  ngbe_setup_fc - Set up flow control
+ *  @hw: pointer to hardware structure
+ *
+ *  Called at init time to set up flow control.
+ **/
+s32 ngbe_setup_fc(struct ngbe_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 pcap_backplane = 0;
+
+	DEBUGFUNC("\n");
+
+	/* Validate the requested mode */
+	if (hw->fc.strict_ieee && hw->fc.requested_mode == ngbe_fc_rx_pause) {
+		ERROR_REPORT1(NGBE_ERROR_UNSUPPORTED,
+						"ngbe_fc_rx_pause not valid in strict IEEE mode\n");
+		ret_val = NGBE_ERR_INVALID_LINK_SETTINGS;
+		goto out;
+	}
+
+	/*
+	 * gig parts do not have a word in the EEPROM to determine the
+	 * default flow control setting, so we explicitly set it to full.
+	 */
+	if (hw->fc.requested_mode == ngbe_fc_default)
+		hw->fc.requested_mode = ngbe_fc_full;
+
+	/*
+	 * The possible values of fc.requested_mode are:
+	 * 0: Flow control is completely disabled
+	 * 1: Rx flow control is enabled (we can receive pause frames,
+	 *    but not send pause frames).
+	 * 2: Tx flow control is enabled (we can send pause frames but
+	 *    we do not support receiving pause frames).
+	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
+	 * other: Invalid.
+	 */
+	switch (hw->fc.requested_mode) {
+	case ngbe_fc_none:
+		/* Flow control completely disabled by software override. */
+		break;
+	case ngbe_fc_tx_pause:
+		/*
+		 * Tx Flow control is enabled, and Rx Flow control is
+		 * disabled by software override.
+		 */
+		if (hw->phy.type != ngbe_phy_m88e1512_sfi &&
+			hw->phy.type != ngbe_phy_yt8521s_sfi)
+			pcap_backplane |= NGBE_SR_AN_MMD_ADV_REG1_PAUSE_ASM;
+		else
+			pcap_backplane |= 0x100;
+		break;
+	case ngbe_fc_rx_pause:
+		/*
+		 * Rx Flow control is enabled and Tx Flow control is
+		 * disabled by software override. Since there really
+		 * isn't a way to advertise that we are capable of RX
+		 * Pause ONLY, we will advertise that we support both
+		 * symmetric and asymmetric Rx PAUSE, as such we fall
+		 * through to the fc_full statement.  Later, we will
+		 * disable the adapter's ability to send PAUSE frames.
+		 */
+	case ngbe_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by SW override. */
+		if (hw->phy.type != ngbe_phy_m88e1512_sfi &&
+			hw->phy.type != ngbe_phy_yt8521s_sfi)
+			pcap_backplane |= NGBE_SR_AN_MMD_ADV_REG1_PAUSE_SYM |
+				NGBE_SR_AN_MMD_ADV_REG1_PAUSE_ASM;
+		else
+			pcap_backplane |= 0x80;
+		break;
+	default:
+		ERROR_REPORT1(NGBE_ERROR_ARGUMENT,
+			"Flow control param set incorrectly\n");
+		ret_val = NGBE_ERR_CONFIG;
+		goto out;
+		break;
+	}
+
+	/*
+	 * AUTOC restart handles negotiation of 1G on backplane
+	 * and copper.
+	 */
+	if ((hw->phy.media_type == ngbe_media_type_copper)) {
+		ret_val = TCALL(hw, phy.ops.set_adv_pause, pcap_backplane);
+	}
+
+out:
+	return ret_val;
+}
+
+
+/**
+ *  ngbe_get_mac_addr - Generic get MAC address
+ *  @hw: pointer to hardware structure
+ *  @mac_addr: Adapter MAC address
+ *
+ *  Reads the adapter's MAC address from first Receive Address Register (RAR0)
+ *  A reset of the adapter must be performed prior to calling this function
+ *  in order for the MAC address to have been loaded from the EEPROM into RAR0
+ **/
+s32 ngbe_get_mac_addr(struct ngbe_hw *hw, u8 *mac_addr)
+{
+	u32 rar_high;
+	u32 rar_low;
+	u16 i;
+
+	DEBUGFUNC("\n");
+
+	wr32(hw, NGBE_PSR_MAC_SWC_IDX, 0);
+	rar_high = rd32(hw, NGBE_PSR_MAC_SWC_AD_H);
+	rar_low = rd32(hw, NGBE_PSR_MAC_SWC_AD_L);
+
+	for (i = 0; i < 2; i++)
+		mac_addr[i] = (u8)(rar_high >> (1 - i) * 8);
+
+	for (i = 0; i < 4; i++)
+		mac_addr[i + 2] = (u8)(rar_low >> (3 - i) * 8);
+
+	return 0;
+}
+
+/**
+ *  ngbe_set_pci_config_data - Generic store PCI bus info
+ *  @hw: pointer to hardware structure
+ *  @link_status: the link status returned by the PCI config space
+ *
+ *  Stores the PCI bus info (speed, width, type) within the ngbe_hw structure
+ **/
+void ngbe_set_pci_config_data(struct ngbe_hw *hw, u16 link_status)
+{
+	if (hw->bus.type == ngbe_bus_type_unknown)
+		hw->bus.type = ngbe_bus_type_pci_express;
+
+	switch (link_status & NGBE_PCI_LINK_WIDTH) {
+	case NGBE_PCI_LINK_WIDTH_1:
+		hw->bus.width = ngbe_bus_width_pcie_x1;
+		break;
+	case NGBE_PCI_LINK_WIDTH_2:
+		hw->bus.width = ngbe_bus_width_pcie_x2;
+		break;
+	case NGBE_PCI_LINK_WIDTH_4:
+		hw->bus.width = ngbe_bus_width_pcie_x4;
+		break;
+	case NGBE_PCI_LINK_WIDTH_8:
+		hw->bus.width = ngbe_bus_width_pcie_x8;
+		break;
+	default:
+		hw->bus.width = ngbe_bus_width_unknown;
+		break;
+	}
+
+	switch (link_status & NGBE_PCI_LINK_SPEED) {
+	case NGBE_PCI_LINK_SPEED_2500:
+		hw->bus.speed = ngbe_bus_speed_2500;
+		break;
+	case NGBE_PCI_LINK_SPEED_5000:
+		hw->bus.speed = ngbe_bus_speed_5000;
+		break;
+	case NGBE_PCI_LINK_SPEED_8000:
+		hw->bus.speed = ngbe_bus_speed_8000;
+		break;
+	default:
+		hw->bus.speed = ngbe_bus_speed_unknown;
+		break;
+	}
+}
+
+/**
+ *  ngbe_get_bus_info - Generic set PCI bus info
+ *  @hw: pointer to hardware structure
+ *
+ *  Gets the PCI bus info (speed, width, type) then calls helper function to
+ *  store this data within the ngbe_hw structure.
+ **/
+s32 ngbe_get_bus_info(struct ngbe_hw *hw)
+{
+	u16 link_status;
+
+	DEBUGFUNC("\n");
+
+	/* Get the negotiated link width and speed from PCI config space */
+	link_status = NGBE_READ_PCIE_WORD(hw, NGBE_PCI_LINK_STATUS);
+
+	ngbe_set_pci_config_data(hw, link_status);
+
+	return 0;
+}
+
+/**
+ *  ngbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines the LAN function id by reading memory-mapped registers
+ *  and swaps the port value if requested.
+ **/
+void ngbe_set_lan_id_multi_port_pcie(struct ngbe_hw *hw)
+{
+	struct ngbe_bus_info *bus = &hw->bus;
+	u32 reg = 0;
+
+	DEBUGFUNC("\n");
+
+	reg = rd32(hw, NGBE_CFG_PORT_ST);
+	bus->lan_id = NGBE_CFG_PORT_ST_LAN_ID(reg);
+	bus->func = bus->lan_id;
+}
+
+/**
+ *  ngbe_stop_adapter - Generic stop Tx/Rx units
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the adapter_stopped flag within ngbe_hw struct. Clears interrupts,
+ *  disables transmit and receive units. The adapter_stopped flag is used by
+ *  the shared code and drivers to determine if the adapter is in a stopped
+ *  state and should not touch the hardware.
+ **/
+s32 ngbe_stop_adapter(struct ngbe_hw *hw)
+{
+	u16 i;
+
+	DEBUGFUNC("\n");
+
+	/*
+	 * Set the adapter_stopped flag so other driver functions stop touching
+	 * the hardware
+	 */
+	hw->adapter_stopped = true;
+
+	/* Disable the receive unit */
+	TCALL(hw, mac.ops.disable_rx);
+
+	/* Set interrupt mask to stop interrupts from being generated */
+	ngbe_intr_disable(hw, NGBE_INTR_ALL);
+
+	/* Clear any pending interrupts, flush previous writes */
+	wr32(hw, NGBE_PX_MISC_IC, 0xffffffff);
+
+	/* ??? 0bit RW->RO */
+	wr32(hw, NGBE_BME_CTL, 0x3);
+
+	/* Disable the transmit unit.  Each queue must be disabled. */
+	for (i = 0; i < hw->mac.max_tx_queues; i++) {
+		wr32m(hw, NGBE_PX_TR_CFG(i),
+			NGBE_PX_TR_CFG_SWFLSH | NGBE_PX_TR_CFG_ENABLE,
+			NGBE_PX_TR_CFG_SWFLSH);
+	}
+
+	/* Disable the receive unit by stopping each queue */
+	for (i = 0; i < hw->mac.max_rx_queues; i++) {
+		wr32m(hw, NGBE_PX_RR_CFG(i),
+			NGBE_PX_RR_CFG_RR_EN, 0);
+	}
+
+	/* flush all queues disables */
+	NGBE_WRITE_FLUSH(hw);
+	msec_delay(2);
+
+	/*
+	 * Prevent the PCI-E bus from hanging by disabling PCI-E master
+	 * access and verify no pending requests
+	 */
+	return ngbe_disable_pcie_master(hw);
+}
+
+/**
+ *  ngbe_led_on - Turns on the software controllable LEDs.
+ *  @hw: pointer to hardware structure
+ *  @index: led number to turn on
+ **/
+s32 ngbe_led_on(struct ngbe_hw *hw, u32 index)
+{
+	u32 led_reg = rd32(hw, NGBE_CFG_LED_CTL);
+
+	DEBUGFUNC("\n");
+
+	/* ??? */
+	/* To turn on the LED, set mode to ON. */
+	led_reg |= index | (index << NGBE_CFG_LED_CTL_LINK_OD_SHIFT);
+	wr32(hw, NGBE_CFG_LED_CTL, led_reg);
+	NGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
+
+/**
+ *  ngbe_led_off - Turns off the software controllable LEDs.
+ *  @hw: pointer to hardware structure
+ *  @index: led number to turn off
+ **/
+s32 ngbe_led_off(struct ngbe_hw *hw, u32 index)
+{
+	u32 led_reg = rd32(hw, NGBE_CFG_LED_CTL);
+
+	DEBUGFUNC("\n");
+
+	/* To turn off the LED, set mode to OFF. */
+	led_reg &= ~(index << NGBE_CFG_LED_CTL_LINK_OD_SHIFT);
+	led_reg |= index;
+	wr32(hw, NGBE_CFG_LED_CTL, led_reg);
+	NGBE_WRITE_FLUSH(hw);
+	return 0;
+}
+
+/**
+ *  ngbe_get_eeprom_semaphore - Get hardware semaphore
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the hardware semaphores so EEPROM access can occur for bit-bang method
+ **/
+STATIC s32 ngbe_get_eeprom_semaphore(struct ngbe_hw *hw)
+{
+	s32 status = NGBE_ERR_EEPROM;
+	u32 timeout = 2000;
+	u32 i;
+	u32 swsm;
+
+	/* Get SMBI software semaphore between device drivers first */
+	for (i = 0; i < timeout; i++) {
+		/*
+		 * If the SMBI bit is 0 when we read it, then the bit will be
+		 * set and we have the semaphore
+		 */
+		swsm = rd32(hw, NGBE_MIS_SWSM);
+		if (!(swsm & NGBE_MIS_SWSM_SMBI)) {
+			status = 0;
+			break;
+		}
+		usec_delay(50);
+	}
+
+	if (i == timeout) {
+		DEBUGOUT("Driver can't access the Eeprom - SMBI Semaphore "
+			 "not granted.\n");
+		/*
+		 * this release is particularly important because our attempts
+		 * above to get the semaphore may have succeeded, and if there
+		 * was a timeout, we should unconditionally clear the semaphore
+		 * bits to free the driver to make progress
+		 */
+		ngbe_release_eeprom_semaphore(hw);
+
+		usec_delay(50);
+		/*
+		 * one last try
+		 * If the SMBI bit is 0 when we read it, then the bit will be
+		 * set and we have the semaphore
+		 */
+		swsm = rd32(hw, NGBE_MIS_SWSM);
+		if (!(swsm & NGBE_MIS_SWSM_SMBI))
+			status = 0;
+	}
+
+	/* Now get the semaphore between SW/FW through the SWESMBI bit */
+	if (status == 0) {
+		for (i = 0; i < timeout; i++) {
+			if (ngbe_check_mng_access(hw)) {
+			/* Set the SW EEPROM semaphore bit to request access */
+				wr32m(hw, NGBE_MNG_SW_SM,
+					NGBE_MNG_SW_SM_SM, NGBE_MNG_SW_SM_SM);
+
+				/*
+				 * If we set the bit successfully then we got
+				 * semaphore.
+				 */
+				swsm = rd32(hw, NGBE_MNG_SW_SM);
+				if (swsm & NGBE_MNG_SW_SM_SM)
+					break;
+			}
+			usec_delay(50);
+		}
+
+		/*
+		 * Release semaphores and return error if SW EEPROM semaphore
+		 * was not granted because we don't have access to the EEPROM
+		 */
+		if (i >= timeout) {
+			ERROR_REPORT1(NGBE_ERROR_POLLING,
+			    "SWESMBI Software EEPROM semaphore not granted.\n");
+			ngbe_release_eeprom_semaphore(hw);
+			status = NGBE_ERR_EEPROM;
+		}
+	} else {
+		ERROR_REPORT1(NGBE_ERROR_POLLING,
+			     "Software semaphore SMBI between device drivers "
+			     "not granted.\n");
+	}
+
+	return status;
+}
+
+/**
+ *  ngbe_release_eeprom_semaphore - Release hardware semaphore
+ *  @hw: pointer to hardware structure
+ *
+ *  This function clears hardware semaphore bits.
+ **/
+STATIC void ngbe_release_eeprom_semaphore(struct ngbe_hw *hw)
+{
+	if (ngbe_check_mng_access(hw)) {
+		wr32m(hw, NGBE_MNG_SW_SM,
+			NGBE_MNG_SW_SM_SM, 0);
+		wr32m(hw, NGBE_MIS_SWSM,
+			NGBE_MIS_SWSM_SMBI, 0);
+		NGBE_WRITE_FLUSH(hw);
+	}
+}
+
+/**
+ *  ngbe_validate_mac_addr - Validate MAC address
+ *  @mac_addr: pointer to MAC address.
+ *
+ *  Tests a MAC address to ensure it is a valid Individual Address
+ **/
+s32 ngbe_validate_mac_addr(u8 *mac_addr)
+{
+	s32 status = 0;
+
+	DEBUGFUNC("\n");
+
+	/* Make sure it is not a multicast address */
+	if (NGBE_IS_MULTICAST(mac_addr)) {
+		DEBUGOUT("MAC address is multicast\n");
+		status = NGBE_ERR_INVALID_MAC_ADDR;
+	/* Not a broadcast address */
+	} else if (NGBE_IS_BROADCAST(mac_addr)) {
+		DEBUGOUT("MAC address is broadcast\n");
+		status = NGBE_ERR_INVALID_MAC_ADDR;
+	/* Reject the zero address */
+	} else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
+		   mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0) {
+		DEBUGOUT("MAC address is all zeros\n");
+		status = NGBE_ERR_INVALID_MAC_ADDR;
+	}
+	return status;
+}
+
+/**
+ *  ngbe_set_rar - Set Rx address register
+ *  @hw: pointer to hardware structure
+ *  @index: Receive address register to write
+ *  @addr: Address to put into receive address register
+ *  @vmdq: VMDq "set" or "pool" index
+ *  @enable_addr: set flag that address is active
+ *
+ *  Puts an ethernet address into a receive address register.
+ **/
+s32 ngbe_set_rar(struct ngbe_hw *hw, u32 index, u8 *addr, u64 pools,
+			  u32 enable_addr)
+{
+	u32 rar_low, rar_high;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	DEBUGFUNC("\n");
+
+	/* Make sure we are using a valid rar index range */
+	if (index >= rar_entries) {
+		ERROR_REPORT2(NGBE_ERROR_ARGUMENT,
+			     "RAR index %d is out of range.\n", index);
+		return NGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	/* select the MAC address */
+	wr32(hw, NGBE_PSR_MAC_SWC_IDX, index);
+
+	/* setup VMDq pool mapping */
+	wr32(hw, NGBE_PSR_MAC_SWC_VM, pools & 0xFFFFFFFF);
+
+	/*
+	 * HW expects these in little endian so we reverse the byte
+	 * order from network order (big endian) to little endian
+	 *
+	 * Some parts put the VMDq setting in the extra RAH bits,
+	 * so save everything except the lower 16 bits that hold part
+	 * of the address and the address valid bit.
+	 */
+	rar_low = ((u32)addr[5] |
+		  ((u32)addr[4] << 8) |
+		  ((u32)addr[3] << 16) |
+		  ((u32)addr[2] << 24));
+	rar_high = ((u32)addr[1] |
+		   ((u32)addr[0] << 8));
+	if (enable_addr != 0)
+		rar_high |= NGBE_PSR_MAC_SWC_AD_H_AV;
+
+	wr32(hw, NGBE_PSR_MAC_SWC_AD_L, rar_low);
+	wr32m(hw, NGBE_PSR_MAC_SWC_AD_H,
+		(NGBE_PSR_MAC_SWC_AD_H_AD(~0) |
+		 NGBE_PSR_MAC_SWC_AD_H_ADTYPE(~0) |
+		 NGBE_PSR_MAC_SWC_AD_H_AV),
+		rar_high);
+
+	return 0;
+}
+
+/**
+ *  ngbe_clear_rar - Remove Rx address register
+ *  @hw: pointer to hardware structure
+ *  @index: Receive address register to write
+ *
+ *  Clears an ethernet address from a receive address register.
+ **/
+s32 ngbe_clear_rar(struct ngbe_hw *hw, u32 index)
+{
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	DEBUGFUNC("\n");
+
+	/* Make sure we are using a valid rar index range */
+	if (index >= rar_entries) {
+		ERROR_REPORT2(NGBE_ERROR_ARGUMENT,
+			     "RAR index %d is out of range.\n", index);
+		return NGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	/*
+	 * Some parts put the VMDq setting in the extra RAH bits,
+	 * so save everything except the lower 16 bits that hold part
+	 * of the address and the address valid bit.
+	 */
+	wr32(hw, NGBE_PSR_MAC_SWC_IDX, index);
+
+	wr32(hw, NGBE_PSR_MAC_SWC_VM, 0);
+	wr32(hw, NGBE_PSR_MAC_SWC_AD_L, 0);
+	wr32m(hw, NGBE_PSR_MAC_SWC_AD_H,
+		(NGBE_PSR_MAC_SWC_AD_H_AD(~0) |
+		 NGBE_PSR_MAC_SWC_AD_H_ADTYPE(~0) |
+		 NGBE_PSR_MAC_SWC_AD_H_AV),
+		0);
+
+	return 0;
+}
+
+/**
+ *  ngbe_init_rx_addrs - Initializes receive address filters.
+ *  @hw: pointer to hardware structure
+ *
+ *  Places the MAC address in receive address register 0 and clears the rest
+ *  of the receive address registers. Clears the multicast table. Assumes
+ *  the receiver is in reset when the routine is called.
+ **/
+s32 ngbe_init_rx_addrs(struct ngbe_hw *hw)
+{
+	u32 i;
+	u32 rar_entries = hw->mac.num_rar_entries;
+	u32 psrctl;
+
+	DEBUGFUNC("\n");
+
+	/*
+	 * If the current mac address is valid, assume it is a software override
+	 * to the permanent address.
+	 * Otherwise, use the permanent address from the eeprom.
+	 */
+	if (ngbe_validate_mac_addr(hw->mac.addr) ==
+		NGBE_ERR_INVALID_MAC_ADDR) {
+		/* Get the MAC address from the RAR0 for later reference */
+		TCALL(hw, mac.ops.get_mac_addr, hw->mac.addr);
+
+		DEBUGOUT3(" Keeping Current RAR0 Addr =%.2X %.2X %.2X %.2X %.2X %.2X\n",
+			hw->mac.addr[0], hw->mac.addr[1],
+			hw->mac.addr[2], hw->mac.addr[3],
+			hw->mac.addr[4], hw->mac.addr[5]);
+	} else {
+		/* Setup the receive address. */
+		DEBUGOUT("Overriding MAC Address in RAR[0]\n");
+		DEBUGOUT3(" New MAC Addr =%.2X %.2X %.2X %.2X %.2X %.2X\n",
+			hw->mac.addr[0], hw->mac.addr[1],
+			hw->mac.addr[2], hw->mac.addr[3],
+			hw->mac.addr[4], hw->mac.addr[5]);
+
+		TCALL(hw, mac.ops.set_rar, 0, hw->mac.addr, 0,
+			NGBE_PSR_MAC_SWC_AD_H_AV);
+	}
+	hw->addr_ctrl.overflow_promisc = 0;
+
+	hw->addr_ctrl.rar_used_count = 1;
+
+	/* Zero out the other receive addresses. */
+	DEBUGOUT1("Clearing RAR[1-%d]\n", rar_entries - 1);
+	for (i = 1; i < rar_entries; i++) {
+		wr32(hw, NGBE_PSR_MAC_SWC_IDX, i);
+		wr32(hw, NGBE_PSR_MAC_SWC_AD_L, 0);
+		wr32(hw, NGBE_PSR_MAC_SWC_AD_H, 0);
+	}
+
+	/* Clear the MTA */
+	hw->addr_ctrl.mta_in_use = 0;
+	psrctl = rd32(hw, NGBE_PSR_CTL);
+	psrctl &= ~(NGBE_PSR_CTL_MO | NGBE_PSR_CTL_MFE);
+	psrctl |= hw->mac.mc_filter_type << NGBE_PSR_CTL_MO_SHIFT;
+	wr32(hw, NGBE_PSR_CTL, psrctl);
+	DEBUGOUT(" Clearing MTA\n");
+	for (i = 0; i < hw->mac.mcft_size; i++)
+		wr32(hw, NGBE_PSR_MC_TBL(i), 0);
+
+	TCALL(hw, mac.ops.init_uta_tables);
+
+	return 0;
+}
+
+/**
+ *  ngbe_add_uc_addr - Adds a secondary unicast address.
+ *  @hw: pointer to hardware structure
+ *  @addr: new address
+ *
+ *  Adds it to unused receive address register or goes into promiscuous mode.
+ **/
+void ngbe_add_uc_addr(struct ngbe_hw *hw, u8 *addr, u32 vmdq)
+{
+	u32 rar_entries = hw->mac.num_rar_entries;
+	u32 rar;
+
+	DEBUGFUNC("\n");
+
+	DEBUGOUT6(" UC Addr = %.2X %.2X %.2X %.2X %.2X %.2X\n",
+		  addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
+
+	/*
+	 * Place this address in the RAR if there is room,
+	 * else put the controller into promiscuous mode
+	 */
+	if (hw->addr_ctrl.rar_used_count < rar_entries) {
+		rar = hw->addr_ctrl.rar_used_count;
+		TCALL(hw, mac.ops.set_rar, rar, addr, vmdq,
+			NGBE_PSR_MAC_SWC_AD_H_AV);
+		DEBUGOUT1("Added a secondary address to RAR[%d]\n", rar);
+		hw->addr_ctrl.rar_used_count++;
+	} else {
+		hw->addr_ctrl.overflow_promisc++;
+	}
+
+	DEBUGOUT("ngbe_add_uc_addr Complete\n");
+}
+
+/**
+ *  ngbe_update_uc_addr_list - Updates MAC list of secondary addresses
+ *  @hw: pointer to hardware structure
+ *  @addr_list: the list of new addresses
+ *  @addr_count: number of addresses
+ *  @next: iterator function to walk the address list
+ *
+ *  The given list replaces any existing list.  Clears the secondary addrs from
+ *  receive address registers.  Uses unused receive address registers for the
+ *  first secondary addresses, and falls back to promiscuous mode as needed.
+ *
+ *  Drivers using secondary unicast addresses must set user_set_promisc when
+ *  manually putting the device into promiscuous mode.
+ **/
+s32 ngbe_update_uc_addr_list(struct ngbe_hw *hw, u8 *addr_list,
+				      u32 addr_count, ngbe_mc_addr_itr next)
+{
+	u8 *addr;
+	u32 i;
+	u32 old_promisc_setting = hw->addr_ctrl.overflow_promisc;
+	u32 uc_addr_in_use;
+	u32 vmdq;
+
+	DEBUGFUNC("\n");
+
+	/*
+	 * Clear accounting of old secondary address list,
+	 * don't count RAR[0]
+	 */
+	uc_addr_in_use = hw->addr_ctrl.rar_used_count - 1;
+	hw->addr_ctrl.rar_used_count -= uc_addr_in_use;
+	hw->addr_ctrl.overflow_promisc = 0;
+
+	/* Zero out the other receive addresses */
+	DEBUGOUT1("Clearing RAR[1-%d]\n", uc_addr_in_use + 1);
+	for (i = 0; i < uc_addr_in_use; i++) {
+		wr32(hw, NGBE_PSR_MAC_SWC_IDX, 1 + i);
+		wr32(hw, NGBE_PSR_MAC_SWC_AD_L, 0);
+		wr32(hw, NGBE_PSR_MAC_SWC_AD_H, 0);
+	}
+
+	/* Add the new addresses */
+	for (i = 0; i < addr_count; i++) {
+		DEBUGOUT(" Adding the secondary addresses:\n");
+		addr = next(hw, &addr_list, &vmdq);
+		ngbe_add_uc_addr(hw, addr, vmdq);
+	}
+
+	if (hw->addr_ctrl.overflow_promisc) {
+		/* enable promisc if not already in overflow or set by user */
+		if (!old_promisc_setting && !hw->addr_ctrl.user_set_promisc) {
+			DEBUGOUT(" Entering address overflow promisc mode\n");
+			wr32m(hw, NGBE_PSR_CTL,
+				NGBE_PSR_CTL_UPE, NGBE_PSR_CTL_UPE);
+		}
+	} else {
+		/* only disable if set by overflow, not by user */
+		if (old_promisc_setting && !hw->addr_ctrl.user_set_promisc) {
+			DEBUGOUT(" Leaving address overflow promisc mode\n");
+			wr32m(hw, NGBE_PSR_CTL,
+				NGBE_PSR_CTL_UPE, 0);
+		}
+	}
+
+	DEBUGOUT("ngbe_update_uc_addr_list Complete\n");
+	return 0;
+}
+
+/**
+ *  ngbe_mta_vector - Determines bit-vector in multicast table to set
+ *  @hw: pointer to hardware structure
+ *  @mc_addr: the multicast address
+ *
+ *  Extracts the 12 bits, from a multicast address, to determine which
+ *  bit-vector to set in the multicast table. The hardware uses 12 bits, from
+ *  incoming rx multicast addresses, to determine the bit-vector to check in
+ *  the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
+ *  by the MO field of the MCSTCTRL. The MO field is set during initialization
+ *  to mc_filter_type.
+ **/
+STATIC s32 ngbe_mta_vector(struct ngbe_hw *hw, u8 *mc_addr)
+{
+	u32 vector = 0;
+
+	DEBUGFUNC("\n");
+
+	switch (hw->mac.mc_filter_type) {
+	case 0:   /* use bits [47:36] of the address */
+		vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
+		break;
+	case 1:   /* use bits [46:35] of the address */
+		vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
+		break;
+	case 2:   /* use bits [45:34] of the address */
+		vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
+		break;
+	case 3:   /* use bits [43:32] of the address */
+		vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
+		break;
+	default:  /* Invalid mc_filter_type */
+		DEBUGOUT("MC filter type param set incorrectly\n");
+		ASSERT(0);
+		break;
+	}
+
+	/* vector can only be 12-bits or boundary will be exceeded */
+	vector &= 0xFFF;
+	return vector;
+}
+
+/**
+ *  ngbe_set_mta - Set bit-vector in multicast table
+ *  @hw: pointer to hardware structure
+ *  @hash_value: Multicast address hash value
+ *
+ *  Sets the bit-vector in the multicast table.
+ **/
+void ngbe_set_mta(struct ngbe_hw *hw, u8 *mc_addr)
+{
+	u32 vector;
+	u32 vector_bit;
+	u32 vector_reg;
+
+	DEBUGFUNC("\n");
+
+	hw->addr_ctrl.mta_in_use++;
+
+	vector = ngbe_mta_vector(hw, mc_addr);
+	DEBUGOUT1(" bit-vector = 0x%03X\n", vector);
+
+	/*
+	 * The MTA is a register array of 128 32-bit registers. It is treated
+	 * like an array of 4096 bits.  We want to set bit
+	 * BitArray[vector_value]. So we figure out what register the bit is
+	 * in, read it, OR in the new bit, then write back the new value.  The
+	 * register is determined by the upper 7 bits of the vector value and
+	 * the bit within that register are determined by the lower 5 bits of
+	 * the value.
+	 */
+	vector_reg = (vector >> 5) & 0x7F;
+	vector_bit = vector & 0x1F;
+	hw->mac.mta_shadow[vector_reg] |= (1 << vector_bit);
+}
+
+/**
+ *  ngbe_update_mc_addr_list - Updates MAC list of multicast addresses
+ *  @hw: pointer to hardware structure
+ *  @mc_addr_list: the list of new multicast addresses
+ *  @mc_addr_count: number of addresses
+ *  @next: iterator function to walk the multicast address list
+ *  @clear: flag, when set clears the table beforehand
+ *
+ *  When the clear flag is set, the given list replaces any existing list.
+ *  Hashes the given addresses into the multicast table.
+ **/
+s32 ngbe_update_mc_addr_list(struct ngbe_hw *hw, u8 *mc_addr_list,
+				      u32 mc_addr_count, ngbe_mc_addr_itr next,
+				      bool clear)
+{
+	u32 i;
+	u32 vmdq;
+	u32 psrctl;
+
+	DEBUGFUNC("\n");
+
+	/*
+	 * Set the new number of MC addresses that we are being requested to
+	 * use.
+	 */
+	hw->addr_ctrl.num_mc_addrs = mc_addr_count;
+	hw->addr_ctrl.mta_in_use = 0;
+
+	/* Clear mta_shadow */
+	if (clear) {
+		DEBUGOUT(" Clearing MTA\n");
+		memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+	}
+
+	/* Update mta_shadow */
+	for (i = 0; i < mc_addr_count; i++) {
+		DEBUGOUT(" Adding the multicast addresses:\n");
+		ngbe_set_mta(hw, next(hw, &mc_addr_list, &vmdq));
+	}
+
+	/* Enable mta */
+	for (i = 0; i < hw->mac.mcft_size; i++)
+		wr32a(hw, NGBE_PSR_MC_TBL(0), i,
+				hw->mac.mta_shadow[i]);
+
+	if (hw->addr_ctrl.mta_in_use > 0) {
+		psrctl = rd32(hw, NGBE_PSR_CTL);
+		psrctl &= ~(NGBE_PSR_CTL_MO | NGBE_PSR_CTL_MFE);
+		psrctl |= NGBE_PSR_CTL_MFE |
+			(hw->mac.mc_filter_type << NGBE_PSR_CTL_MO_SHIFT);
+		wr32(hw, NGBE_PSR_CTL, psrctl);
+	}
+
+	DEBUGOUT("ngbe_update_mc_addr_list Complete\n");
+	return 0;
+}
+
+/**
+ *  ngbe_enable_mc - Enable multicast address in RAR
+ *  @hw: pointer to hardware structure
+ *
+ *  Enables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ngbe_enable_mc(struct ngbe_hw *hw)
+{
+	struct ngbe_addr_filter_info *a = &hw->addr_ctrl;
+	u32 psrctl;
+
+	DEBUGFUNC("\n");
+
+	if (a->mta_in_use > 0) {
+		psrctl = rd32(hw, NGBE_PSR_CTL);
+		psrctl &= ~(NGBE_PSR_CTL_MO | NGBE_PSR_CTL_MFE);
+		psrctl |= NGBE_PSR_CTL_MFE |
+			(hw->mac.mc_filter_type << NGBE_PSR_CTL_MO_SHIFT);
+		wr32(hw, NGBE_PSR_CTL, psrctl);
+	}
+
+	return 0;
+}
+
+/**
+ *  ngbe_disable_mc - Disable multicast address in RAR
+ *  @hw: pointer to hardware structure
+ *
+ *  Disables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ngbe_disable_mc(struct ngbe_hw *hw)
+{
+	struct ngbe_addr_filter_info *a = &hw->addr_ctrl;
+	u32 psrctl;
+	DEBUGFUNC("\n");
+
+	if (a->mta_in_use > 0) {
+		psrctl = rd32(hw, NGBE_PSR_CTL);
+		psrctl &= ~(NGBE_PSR_CTL_MO | NGBE_PSR_CTL_MFE);
+		psrctl |= hw->mac.mc_filter_type << NGBE_PSR_CTL_MO_SHIFT;
+		wr32(hw, NGBE_PSR_CTL, psrctl);
+	}
+
+	return 0;
+}
+
+/**
+ *  ngbe_fc_enable - Enable flow control
+ *  @hw: pointer to hardware structure
+ *
+ *  Enable flow control according to the current settings.
+ **/
+s32 ngbe_fc_enable(struct ngbe_hw *hw)
+{
+	s32 ret_val = 0;
+	u32 mflcn_reg, fccfg_reg;
+	u32 reg;
+	u32 fcrtl, fcrth;
+
+	DEBUGFUNC("\n");
+
+	/* Validate the water mark configuration */
+	if (!hw->fc.pause_time) {
+		ret_val = NGBE_ERR_INVALID_LINK_SETTINGS;
+		goto out;
+	}
+
+
+	/* Low water mark of zero causes XOFF floods */
+	if ((hw->fc.current_mode & ngbe_fc_tx_pause) && hw->fc.high_water) {
+		if (!hw->fc.low_water || hw->fc.low_water >= hw->fc.high_water) {
+			DEBUGOUT("Invalid water mark configuration\n");
+			ret_val = NGBE_ERR_INVALID_LINK_SETTINGS;
+			goto out;
+		}
+	}
+
+	/* Negotiate the fc mode to use */
+	ngbe_fc_autoneg(hw);
+
+	/* Disable any previous flow control settings */
+	mflcn_reg = rd32(hw, NGBE_MAC_RX_FLOW_CTRL);
+	mflcn_reg &= ~NGBE_MAC_RX_FLOW_CTRL_RFE;
+
+	fccfg_reg = rd32(hw, NGBE_RDB_RFCC);
+	fccfg_reg &= ~NGBE_RDB_RFCC_RFCE_802_3X;
+
+	/*
+	 * The possible values of fc.current_mode are:
+	 * 0: Flow control is completely disabled
+	 * 1: Rx flow control is enabled (we can receive pause frames,
+	 *    but not send pause frames).
+	 * 2: Tx flow control is enabled (we can send pause frames but
+	 *    we do not support receiving pause frames).
+	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
+	 * other: Invalid.
+	 */
+	switch (hw->fc.current_mode) {
+	case ngbe_fc_none:
+		/*
+		 * Flow control is disabled by software override or autoneg.
+		 * The code below will actually disable it in the HW.
+		 */
+		break;
+	case ngbe_fc_rx_pause:
+		/*
+		 * Rx Flow control is enabled and Tx Flow control is
+		 * disabled by software override. Since there really
+		 * isn't a way to advertise that we are capable of RX
+		 * Pause ONLY, we will advertise that we support both
+		 * symmetric and asymmetric Rx PAUSE.  Later, we will
+		 * disable the adapter's ability to send PAUSE frames.
+		 */
+		mflcn_reg |= NGBE_MAC_RX_FLOW_CTRL_RFE;
+		break;
+	case ngbe_fc_tx_pause:
+		/*
+		 * Tx Flow control is enabled, and Rx Flow control is
+		 * disabled by software override.
+		 */
+		fccfg_reg |= NGBE_RDB_RFCC_RFCE_802_3X;
+		break;
+	case ngbe_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by SW override. */
+		mflcn_reg |= NGBE_MAC_RX_FLOW_CTRL_RFE;
+		fccfg_reg |= NGBE_RDB_RFCC_RFCE_802_3X;
+		break;
+	default:
+		ERROR_REPORT1(NGBE_ERROR_ARGUMENT,
+						"Flow control param set incorrectly\n");
+		ret_val = NGBE_ERR_CONFIG;
+		goto out;
+		break;
+	}
+
+	/* Set 802.3x based flow control settings. */
+	wr32(hw, NGBE_MAC_RX_FLOW_CTRL, mflcn_reg);
+	wr32(hw, NGBE_RDB_RFCC, fccfg_reg);
+
+	/* Set up and enable Rx high/low water mark thresholds, enable XON. */
+	if ((hw->fc.current_mode & ngbe_fc_tx_pause) &&
+			hw->fc.high_water) {
+		/* 32Byte granularity */
+		fcrtl = (hw->fc.low_water << 10) |
+			NGBE_RDB_RFCL_XONE;
+		wr32(hw, NGBE_RDB_RFCL, fcrtl);
+		fcrth = (hw->fc.high_water << 10) |
+			NGBE_RDB_RFCH_XOFFE;
+	} else {
+		wr32(hw, NGBE_RDB_RFCL, 0);
+		/*
+		 * In order to prevent Tx hangs when the internal Tx
+		 * switch is enabled we must set the high water mark
+		 * to the Rx packet buffer size - 24KB.  This allows
+		 * the Tx switch to function even under heavy Rx
+		 * workloads.
+		 */
+		fcrth = rd32(hw, NGBE_RDB_PB_SZ) - 24576;
+	}
+
+	wr32(hw, NGBE_RDB_RFCH, fcrth);
+
+	/* Configure pause time (2 TCs per register) */
+	reg = hw->fc.pause_time * 0x00010000;
+	wr32(hw, NGBE_RDB_RFCV, reg);
+
+	/* Configure flow control refresh threshold value */
+	wr32(hw, NGBE_RDB_RFCRT, hw->fc.pause_time / 2);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  ngbe_negotiate_fc - Negotiate flow control
+ *  @hw: pointer to hardware structure
+ *  @adv_reg: flow control advertised settings
+ *  @lp_reg: link partner's flow control settings
+ *  @adv_sym: symmetric pause bit in advertisement
+ *  @adv_asm: asymmetric pause bit in advertisement
+ *  @lp_sym: symmetric pause bit in link partner advertisement
+ *  @lp_asm: asymmetric pause bit in link partner advertisement
+ *
+ *  Find the intersection between advertised settings and link partner's
+ *  advertised settings
+ **/
+STATIC s32 ngbe_negotiate_fc(struct ngbe_hw *hw, u32 adv_reg, u32 lp_reg,
+						u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
+{
+	if ((!(adv_reg)) ||  (!(lp_reg))) {
+		ERROR_REPORT3(NGBE_ERROR_UNSUPPORTED,
+			"Local or link partner's advertised flow control "
+				"settings are NULL. Local: %x, link partner: %x\n",
+					adv_reg, lp_reg);
+		return NGBE_ERR_FC_NOT_NEGOTIATED;
+	}
+
+	if ((adv_reg & adv_sym) && (lp_reg & lp_sym)) {
+		/*
+		 * Now we need to check if the user selected Rx ONLY
+		 * of pause frames.  In this case, we had to advertise
+		 * FULL flow control because we could not advertise RX
+		 * ONLY. Hence, we must now check to see if we need to
+		 * turn OFF the TRANSMISSION of PAUSE frames.
+		 */
+		if (hw->fc.requested_mode == ngbe_fc_full) {
+			hw->fc.current_mode = ngbe_fc_full;
+			DEBUGOUT("Flow Control = FULL.\n");
+		} else {
+			hw->fc.current_mode = ngbe_fc_rx_pause;
+			DEBUGOUT("Flow Control=RX PAUSE frames only\n");
+		}
+	} else if (!(adv_reg & adv_sym) && (adv_reg & adv_asm) &&
+				(lp_reg & lp_sym) && (lp_reg & lp_asm)) {
+		hw->fc.current_mode = ngbe_fc_tx_pause;
+		DEBUGOUT("Flow Control = TX PAUSE frames only.\n");
+	} else if ((adv_reg & adv_sym) && (adv_reg & adv_asm) &&
+				!(lp_reg & lp_sym) && (lp_reg & lp_asm)) {
+		hw->fc.current_mode = ngbe_fc_rx_pause;
+		DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
+	} else {
+		hw->fc.current_mode = ngbe_fc_none;
+		DEBUGOUT("Flow Control = NONE.\n");
+	}
+	return 0;
+}
+
+/**
+ *  ngbe_fc_autoneg_copper - Enable flow control IEEE clause 37
+ *  @hw: pointer to hardware structure
+ *
+ *  Enable flow control according to IEEE clause 37.
+ **/
+STATIC s32 ngbe_fc_autoneg_copper(struct ngbe_hw *hw)
+{
+	u8 technology_ability_reg = 0;
+	u8 lp_technology_ability_reg = 0;
+
+	TCALL(hw, phy.ops.get_adv_pause, &technology_ability_reg);
+	TCALL(hw, phy.ops.get_lp_adv_pause, &lp_technology_ability_reg);
+
+	return ngbe_negotiate_fc(hw, (u32)technology_ability_reg,
+								(u32)lp_technology_ability_reg,
+									NGBE_TAF_SYM_PAUSE, NGBE_TAF_ASM_PAUSE,
+										NGBE_TAF_SYM_PAUSE, NGBE_TAF_ASM_PAUSE);
+}
+
+/**
+ *  ngbe_fc_autoneg - Configure flow control
+ *  @hw: pointer to hardware structure
+ *
+ *  Compares our advertised flow control capabilities to those advertised by
+ *  our link partner, and determines the proper flow control mode to use.
+ **/
+void ngbe_fc_autoneg(struct ngbe_hw *hw)
+{
+	s32 ret_val = NGBE_ERR_FC_NOT_NEGOTIATED;
+	u32 speed;
+	bool link_up;
+
+	DEBUGFUNC("\n");
+
+	/*
+	 * AN should have completed when the cable was plugged in.
+	 * Look for reasons to bail out.  Bail out if:
+	 * - FC autoneg is disabled, or if
+	 * - link is not up.
+	 */
+	if (hw->fc.disable_fc_autoneg) {
+		ERROR_REPORT1(NGBE_ERROR_UNSUPPORTED,
+						"Flow control autoneg is disabled");
+		goto out;
+	}
+
+	TCALL(hw, mac.ops.check_link, &speed, &link_up, false);
+	if (!link_up) {
+		ERROR_REPORT1(NGBE_ERROR_SOFTWARE, "The link is down");
+		goto out;
+	}
+
+	switch (hw->phy.media_type) {
+	/* Autoneg flow control on fiber adapters */
+	case ngbe_media_type_fiber:
+		break;
+
+	/* Autoneg flow control on copper adapters */
+	case ngbe_media_type_copper:
+			ret_val = ngbe_fc_autoneg_copper(hw);
+		break;
+
+	default:
+		break;
+	}
+
+out:
+	if (ret_val == NGBE_OK) {
+		hw->fc.fc_was_autonegged = true;
+	} else {
+		hw->fc.fc_was_autonegged = false;
+		hw->fc.current_mode = hw->fc.requested_mode;
+	}
+}
+
+/**
+ *  ngbe_disable_pcie_master - Disable PCI-express master access
+ *  @hw: pointer to hardware structure
+ *
+ *  Disables PCI-Express master access and verifies there are no pending
+ *  requests. NGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable
+ *  bit hasn't caused the master requests to be disabled, else 0
+ *  is returned signifying master requests disabled.
+ **/
+s32 ngbe_disable_pcie_master(struct ngbe_hw *hw)
+{
+	s32 status = 0;
+	u32 i;
+
+	DEBUGFUNC("\n");
+
+	/* Always set this bit to ensure any future transactions are blocked */
+	pci_clear_master(((struct ngbe_adapter *)hw->back)->pdev);
+
+	/* Exit if master requests are blocked */
+	if (!(rd32(hw, NGBE_PX_TRANSACTION_PENDING)) ||
+		NGBE_REMOVED(hw->hw_addr))
+		goto out;
+
+
+	/* Poll for master request bit to clear */
+	for (i = 0; i < NGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) {
+		usec_delay(100);
+		if (!(rd32(hw, NGBE_PX_TRANSACTION_PENDING)))
+			goto out;
+	}
+
+
+	ERROR_REPORT1(NGBE_ERROR_POLLING,
+				"PCIe transaction pending bit did not clear.\n");
+	status = NGBE_ERR_MASTER_REQUESTS_PENDING;
+
+out:
+	return status;
+}
+
+/**
+ *  ngbe_acquire_swfw_sync - Acquire SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to acquire
+ *
+ *  Acquires the SWFW semaphore through the GSSR register for the specified
+ *  function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+s32 ngbe_acquire_swfw_sync(struct ngbe_hw *hw, u32 mask)
+{
+	u32 gssr = 0;
+	u32 swmask = mask;
+	u32 fwmask = mask << 16;
+	u32 timeout = 200;
+	u32 i;
+
+	for (i = 0; i < timeout; i++) {
+		/*
+		 * SW NVM semaphore bit is used for access to all
+		 * SW_FW_SYNC bits (not just NVM)
+		 */
+		if (ngbe_get_eeprom_semaphore(hw))
+			return NGBE_ERR_SWFW_SYNC;
+
+		if (ngbe_check_mng_access(hw)) {
+			gssr = rd32(hw, NGBE_MNG_SWFW_SYNC);
+			if (!(gssr & (fwmask | swmask))) {
+				gssr |= swmask;
+				wr32(hw, NGBE_MNG_SWFW_SYNC, gssr);
+				ngbe_release_eeprom_semaphore(hw);
+				return 0;
+			} else {
+				/* Resource is currently in use by FW or SW */
+				ngbe_release_eeprom_semaphore(hw);
+				msec_delay(5);
+			}
+		}
+	}
+
+	ERROR_REPORT1(NGBE_ERROR_POLLING,
+		"ngbe_acquire_swfw_sync: i = %u, gssr = %u\n", i, gssr);
+
+
+	/* If time expired clear the bits holding the lock and retry */
+	if (gssr & (fwmask | swmask))
+		ngbe_release_swfw_sync(hw, gssr & (fwmask | swmask));
+
+	msec_delay(5);
+	return NGBE_ERR_SWFW_SYNC;
+}
+
+/**
+ *  ngbe_release_swfw_sync - Release SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to release
+ *
+ *  Releases the SWFW semaphore through the GSSR register for the specified
+ *  function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+void ngbe_release_swfw_sync(struct ngbe_hw *hw, u32 mask)
+{
+	ngbe_get_eeprom_semaphore(hw);
+	if (ngbe_check_mng_access(hw))
+		wr32m(hw, NGBE_MNG_SWFW_SYNC, mask, 0);
+
+	ngbe_release_eeprom_semaphore(hw);
+}
+
+/**
+ *  ngbe_disable_sec_rx_path - Stops the receive data path
+ *  @hw: pointer to hardware structure
+ *
+ *  Stops the receive data path and waits for the HW to internally empty
+ *  the Rx security block
+ **/
+s32 ngbe_disable_sec_rx_path(struct ngbe_hw *hw)
+{
+#define NGBE_MAX_SECRX_POLL 40
+
+	int i;
+	int secrxreg;
+
+	DEBUGFUNC("\n");
+
+	wr32m(hw, NGBE_RSEC_CTL,
+		NGBE_RSEC_CTL_RX_DIS, NGBE_RSEC_CTL_RX_DIS);
+	for (i = 0; i < NGBE_MAX_SECRX_POLL; i++) {
+		secrxreg = rd32(hw, NGBE_RSEC_ST);
+		if (secrxreg & NGBE_RSEC_ST_RSEC_RDY)
+			break;
+		else
+			/* Use interrupt-safe sleep just in case */
+			usec_delay(1000);
+	}
+
+	/* For informational purposes only */
+	if (i >= NGBE_MAX_SECRX_POLL)
+		DEBUGOUT("Rx unit being enabled before security "
+			 "path fully disabled.  Continuing with init.\n");
+
+	return 0;
+}
+
+/**
+ *  ngbe_enable_sec_rx_path - Enables the receive data path
+ *  @hw: pointer to hardware structure
+ *
+ *  Enables the receive data path.
+ **/
+s32 ngbe_enable_sec_rx_path(struct ngbe_hw *hw)
+{
+	DEBUGFUNC("\n");
+
+	wr32m(hw, NGBE_RSEC_CTL,
+		NGBE_RSEC_CTL_RX_DIS, 0);
+	NGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
+
+/**
+ *  ngbe_insert_mac_addr - Find a RAR for this mac address
+ *  @hw: pointer to hardware structure
+ *  @addr: Address to put into receive address register
+ *  @vmdq: VMDq pool to assign
+ *
+ *  Puts an ethernet address into a receive address register, or
+ *  finds the rar that it is aleady in; adds to the pool list
+ **/
+s32 ngbe_insert_mac_addr(struct ngbe_hw *hw, u8 *addr, u32 vmdq)
+{
+	static const u32 NO_EMPTY_RAR_FOUND = 0xFFFFFFFF;
+	u32 first_empty_rar = NO_EMPTY_RAR_FOUND;
+	u32 rar;
+	u32 rar_low, rar_high;
+	u32 addr_low, addr_high;
+
+	DEBUGFUNC("\n");
+
+	/* swap bytes for HW little endian */
+	addr_low  = addr[5] | (addr[4] << 8)
+			    | (addr[3] << 16)
+			    | (addr[2] << 24);
+	addr_high = addr[1] | (addr[0] << 8);
+
+	/*
+	 * Either find the mac_id in rar or find the first empty space.
+	 * rar_highwater points to just after the highest currently used
+	 * rar in order to shorten the search.  It grows when we add a new
+	 * rar to the top.
+	 */
+	for (rar = 0; rar < hw->mac.rar_highwater; rar++) {
+		wr32(hw, NGBE_PSR_MAC_SWC_IDX, rar);
+		rar_high = rd32(hw, NGBE_PSR_MAC_SWC_AD_H);
+
+		if (((NGBE_PSR_MAC_SWC_AD_H_AV & rar_high) == 0)
+		    && first_empty_rar == NO_EMPTY_RAR_FOUND) {
+			first_empty_rar = rar;
+		} else if ((rar_high & 0xFFFF) == addr_high) {
+			rar_low = rd32(hw, NGBE_PSR_MAC_SWC_AD_L);
+			if (rar_low == addr_low)
+				break;    /* found it already in the rars */
+		}
+	}
+
+	if (rar < hw->mac.rar_highwater) {
+
+	} else if (first_empty_rar != NO_EMPTY_RAR_FOUND) {
+		/* stick it into first empty RAR slot we found */
+		rar = first_empty_rar;
+		TCALL(hw, mac.ops.set_rar, rar, addr, vmdq,
+			       NGBE_PSR_MAC_SWC_AD_H_AV);
+	} else if (rar == hw->mac.rar_highwater) {
+		/* add it to the top of the list and inc the highwater mark */
+		TCALL(hw, mac.ops.set_rar, rar, addr, vmdq,
+			       NGBE_PSR_MAC_SWC_AD_H_AV);
+		hw->mac.rar_highwater++;
+	} else if (rar >= hw->mac.num_rar_entries) {
+		return NGBE_ERR_INVALID_MAC_ADDR;
+	}
+
+	return rar;
+}
+
+/**
+ *  ngbe_clear_vmdq - Disassociate a VMDq pool index from a rx address
+ *  @hw: pointer to hardware struct
+ *  @rar: receive address register index to disassociate
+ *  @vmdq: VMDq pool index to remove from the rar
+ **/
+s32 ngbe_clear_vmdq(struct ngbe_hw *hw, u32 rar, u32 vmdq)
+{
+	u32 mpsar_lo;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	DEBUGFUNC("\n");
+	UNREFERENCED_PARAMETER(vmdq);
+
+	/* Make sure we are using a valid rar index range */
+	if (rar >= rar_entries) {
+		ERROR_REPORT2(NGBE_ERROR_ARGUMENT,
+			     "RAR index %d is out of range.\n", rar);
+		return NGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	wr32(hw, NGBE_PSR_MAC_SWC_IDX, rar);
+	mpsar_lo = rd32(hw, NGBE_PSR_MAC_SWC_VM);
+
+	if (NGBE_REMOVED(hw->hw_addr))
+		goto done;
+
+	if (!mpsar_lo)
+		goto done;
+
+	/* was that the last pool using this rar? */
+	if (mpsar_lo == 0 && rar != 0)
+		TCALL(hw, mac.ops.clear_rar, rar);
+done:
+	return 0;
+}
+
+/**
+ *  ngbe_set_vmdq - Associate a VMDq pool index with a rx address
+ *  @hw: pointer to hardware struct
+ *  @rar: receive address register index to associate with a VMDq index
+ *  @vmdq: VMDq pool index
+ **/
+s32 ngbe_set_vmdq(struct ngbe_hw *hw, u32 rar, u32 pool)
+{
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	DEBUGFUNC("\n");
+	UNREFERENCED_PARAMETER(pool);
+
+	/* Make sure we are using a valid rar index range */
+	if (rar >= rar_entries) {
+		ERROR_REPORT2(NGBE_ERROR_ARGUMENT,
+			     "RAR index %d is out of range.\n", rar);
+		return NGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	return 0;
+}
+
+/**
+ *  This function should only be involved in the IOV mode.
+ *  In IOV mode, Default pool is next pool after the number of
+ *  VFs advertized and not 0.
+ *  MPSAR table needs to be updated for SAN_MAC RAR [hw->mac.san_mac_rar_index]
+ *
+ *  ngbe_set_vmdq_san_mac - Associate default VMDq pool index with a rx address
+ *  @hw: pointer to hardware struct
+ *  @vmdq: VMDq pool index
+ **/
+s32 ngbe_set_vmdq_san_mac(struct ngbe_hw *hw, u32 vmdq)
+{
+	u32 rar = hw->mac.san_mac_rar_index;
+
+	DEBUGFUNC("\n");
+	/* ??? */
+	if (vmdq > 32)
+		return -1;
+
+	wr32(hw, NGBE_PSR_MAC_SWC_IDX, rar);
+	wr32(hw, NGBE_PSR_MAC_SWC_VM, 1 << vmdq);
+
+	return 0;
+}
+
+/**
+ *  ngbe_init_uta_tables - Initialize the Unicast Table Array
+ *  @hw: pointer to hardware structure
+ **/
+s32 ngbe_init_uta_tables(struct ngbe_hw *hw)
+{
+	int i;
+
+	DEBUGFUNC("\n");
+	DEBUGOUT(" Clearing UTA\n");
+
+	for (i = 0; i < 128; i++)
+		wr32(hw, NGBE_PSR_UC_TBL(i), 0);
+
+	return 0;
+}
+
+/**
+ *  ngbe_find_vlvf_slot - find the vlanid or the first empty slot
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *
+ *  return the VLVF index where this VLAN id should be placed
+ *
+ **/
+s32 ngbe_find_vlvf_slot(struct ngbe_hw *hw, u32 vlan)
+{
+	u32 bits = 0;
+	u32 first_empty_slot = 0;
+	s32 regindex;
+
+	/* short cut the special case */
+	if (vlan == 0)
+		return 0;
+
+	/*
+	 * Search for the vlan id in the VLVF entries. Save off the first empty
+	 * slot found along the way
+	 */
+	for (regindex = 1; regindex < NGBE_PSR_VLAN_SWC_ENTRIES; regindex++) {
+		wr32(hw, NGBE_PSR_VLAN_SWC_IDX, regindex);
+		bits = rd32(hw, NGBE_PSR_VLAN_SWC);
+		if (!bits && !(first_empty_slot))
+			first_empty_slot = regindex;
+		else if ((bits & 0x0FFF) == vlan)
+			break;
+	}
+
+	/*
+	 * If regindex is less than NGBE_VLVF_ENTRIES, then we found the vlan
+	 * in the VLVF. Else use the first empty VLVF register for this
+	 * vlan id.
+	 */
+	if (regindex >= NGBE_PSR_VLAN_SWC_ENTRIES) {
+		if (first_empty_slot)
+			regindex = first_empty_slot;
+		else {
+			ERROR_REPORT1(NGBE_ERROR_SOFTWARE,
+				     "No space in VLVF.\n");
+			regindex = NGBE_ERR_NO_SPACE;
+		}
+	}
+
+	return regindex;
+}
+
+/**
+ *  ngbe_set_vfta - Set VLAN filter table
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *  @vind: VMDq output index that maps queue to VLAN id in VFVFB
+ *  @vlan_on: boolean flag to turn on/off VLAN in VFVF
+ *
+ *  Turn on/off specified VLAN in the VLAN filter table.
+ **/
+s32 ngbe_set_vfta(struct ngbe_hw *hw, u32 vlan, u32 vind,
+			   bool vlan_on)
+{
+	s32 regindex;
+	u32 bitindex;
+	u32 vfta;
+	u32 targetbit;
+	s32 ret_val = 0;
+	bool vfta_changed = false;
+
+	DEBUGFUNC("\n");
+
+	if (vlan > 4095)
+		return NGBE_ERR_PARAM;
+
+	/*
+	 * this is a 2 part operation - first the VFTA, then the
+	 * VLVF and VLVFB if VT Mode is set
+	 * We don't write the VFTA until we know the VLVF part succeeded.
+	 */
+
+	/* Part 1
+	 * The VFTA is a bitstring made up of 128 32-bit registers
+	 * that enable the particular VLAN id, much like the MTA:
+	 *    bits[11-5]: which register
+	 *    bits[4-0]:  which bit in the register
+	 */
+	regindex = (vlan >> 5) & 0x7F;
+	bitindex = vlan & 0x1F;
+	targetbit = (1 << bitindex);
+	/* errata 5 */
+	vfta = hw->mac.vft_shadow[regindex];
+	if (vlan_on) {
+		if (!(vfta & targetbit)) {
+			vfta |= targetbit;
+			vfta_changed = true;
+		}
+	} else {
+		if ((vfta & targetbit)) {
+			vfta &= ~targetbit;
+			vfta_changed = true;
+		}
+	}
+
+	/* Part 2
+	 * Call ngbe_set_vlvf to set VLVFB and VLVF
+	 */
+	ret_val = ngbe_set_vlvf(hw, vlan, vind, vlan_on,
+					 &vfta_changed);
+	if (ret_val != 0)
+		return ret_val;
+
+	if (vfta_changed)
+		wr32(hw, NGBE_PSR_VLAN_TBL(regindex), vfta);
+	/* errata 5 */
+	hw->mac.vft_shadow[regindex] = vfta;
+	return 0;
+}
+
+/**
+ *  ngbe_set_vlvf - Set VLAN Pool Filter
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *  @vind: VMDq output index that maps queue to VLAN id in VFVFB
+ *  @vlan_on: boolean flag to turn on/off VLAN in VFVF
+ *  @vfta_changed: pointer to boolean flag which indicates whether VFTA
+ *                 should be changed
+ *
+ *  Turn on/off specified bit in VLVF table.
+ **/
+s32 ngbe_set_vlvf(struct ngbe_hw *hw, u32 vlan, u32 vind,
+			    bool vlan_on, bool *vfta_changed)
+{
+	u32 vt;
+
+	DEBUGFUNC("\n");
+
+	if (vlan > 4095)
+		return NGBE_ERR_PARAM;
+
+	/* If VT Mode is set
+	 *   Either vlan_on
+	 *     make sure the vlan is in VLVF
+	 *     set the vind bit in the matching VLVFB
+	 *   Or !vlan_on
+	 *     clear the pool bit and possibly the vind
+	 */
+	vt = rd32(hw, NGBE_CFG_PORT_CTL);
+	if (vt & NGBE_CFG_PORT_CTL_NUM_VT_MASK) {
+		s32 vlvf_index;
+		u32 bits = 0;
+
+		vlvf_index = ngbe_find_vlvf_slot(hw, vlan);
+		if (vlvf_index < 0)
+			return vlvf_index;
+
+		wr32(hw, NGBE_PSR_VLAN_SWC_IDX, vlvf_index);
+		if (vlan_on) {
+			/* set the pool bit */
+			if (vind < 32) {
+				bits = rd32(hw,
+						NGBE_PSR_VLAN_SWC_VM_L);
+				bits |= (1 << vind);
+				wr32(hw,
+						NGBE_PSR_VLAN_SWC_VM_L,
+						bits);
+			}
+		} else {
+			/* clear the pool bit */
+			if (vind < 32) {
+				bits = rd32(hw,
+						NGBE_PSR_VLAN_SWC_VM_L);
+				bits &= ~(1 << vind);
+				wr32(hw,
+						NGBE_PSR_VLAN_SWC_VM_L,
+						bits);
+			} else {
+				bits |= rd32(hw,
+						NGBE_PSR_VLAN_SWC_VM_L);
+			}
+		}
+
+		/*
+		 * If there are still bits set in the VLVFB registers
+		 * for the VLAN ID indicated we need to see if the
+		 * caller is requesting that we clear the VFTA entry bit.
+		 * If the caller has requested that we clear the VFTA
+		 * entry bit but there are still pools/VFs using this VLAN
+		 * ID entry then ignore the request.  We're not worried
+		 * about the case where we're turning the VFTA VLAN ID
+		 * entry bit on, only when requested to turn it off as
+		 * there may be multiple pools and/or VFs using the
+		 * VLAN ID entry.  In that case we cannot clear the
+		 * VFTA bit until all pools/VFs using that VLAN ID have also
+		 * been cleared.  This will be indicated by "bits" being
+		 * zero.
+		 */
+		if (bits) {
+			wr32(hw, NGBE_PSR_VLAN_SWC,
+					(NGBE_PSR_VLAN_SWC_VIEN | vlan));
+			if ((!vlan_on) && (vfta_changed != NULL)) {
+				/* someone wants to clear the vfta entry
+				 * but some pools/VFs are still using it.
+				 * Ignore it. */
+				*vfta_changed = false;
+			}
+		} else
+			wr32(hw, NGBE_PSR_VLAN_SWC, 0);
+	}
+
+	return 0;
+}
+
+/**
+ *  ngbe_clear_vfta - Clear VLAN filter table
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+s32 ngbe_clear_vfta(struct ngbe_hw *hw)
+{
+	u32 offset;
+
+	DEBUGFUNC("\n");
+
+	for (offset = 0; offset < hw->mac.vft_size; offset++) {
+		wr32(hw, NGBE_PSR_VLAN_TBL(offset), 0);
+		/* errata 5 */
+		hw->mac.vft_shadow[offset] = 0;
+	}
+
+	for (offset = 0; offset < NGBE_PSR_VLAN_SWC_ENTRIES; offset++) {
+		wr32(hw, NGBE_PSR_VLAN_SWC_IDX, offset);
+		wr32(hw, NGBE_PSR_VLAN_SWC, 0);
+		wr32(hw, NGBE_PSR_VLAN_SWC_VM_L, 0);
+	}
+
+	return 0;
+}
+
+
+/**
+ *  ngbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing
+ *  @hw: pointer to hardware structure
+ *  @enable: enable or disable switch for anti-spoofing
+ *  @pf: Physical Function pool - do not enable anti-spoofing for the PF
+ *
+ **/
+void ngbe_set_mac_anti_spoofing(struct ngbe_hw *hw, bool enable, int pf)
+{
+	u64 pfvfspoof = 0;
+
+	DEBUGFUNC("\n");
+
+	if (enable) {
+		/*
+		 * The PF should be allowed to spoof so that it can support
+		 * emulation mode NICs.  Do not set the bits assigned to the PF
+		 * Remaining pools belong to the PF so they do not need to have
+		 * anti-spoofing enabled.
+		 */
+		pfvfspoof = (1 << pf) - 1;
+		wr32(hw, NGBE_TDM_MAC_AS_L,
+				pfvfspoof & 0xff);
+	} else {
+		wr32(hw, NGBE_TDM_MAC_AS_L, 0);
+	}
+}
+
+/**
+ *  ngbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing
+ *  @hw: pointer to hardware structure
+ *  @enable: enable or disable switch for VLAN anti-spoofing
+ *  @vf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing
+ *
+ **/
+void ngbe_set_vlan_anti_spoofing(struct ngbe_hw *hw, bool enable, int vf)
+{
+	u32 pfvfspoof;
+
+	DEBUGFUNC("\n");
+
+	if (vf > 8)
+		return;
+
+	pfvfspoof = rd32(hw, NGBE_TDM_VLAN_AS_L);
+	if (enable)
+		pfvfspoof |= (1 << vf);
+	else
+		pfvfspoof &= ~(1 << vf);
+	wr32(hw, NGBE_TDM_VLAN_AS_L, pfvfspoof);
+
+}
+
+/**
+ *  ngbe_set_ethertype_anti_spoofing - Enable/Disable Ethertype anti-spoofing
+ *  @hw: pointer to hardware structure
+ *  @enable: enable or disable switch for Ethertype anti-spoofing
+ *  @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
+ *
+ **/
+void ngbe_set_ethertype_anti_spoofing(struct ngbe_hw *hw,
+		bool enable, int vf)
+{
+	u32 pfvfspoof;
+
+	DEBUGFUNC("\n");
+
+	if (vf <= 8) {
+		pfvfspoof = rd32(hw, NGBE_TDM_ETYPE_AS_L);
+		if (enable)
+			pfvfspoof |= (1 << vf);
+		else
+			pfvfspoof &= ~(1 << vf);
+		wr32(hw, NGBE_TDM_ETYPE_AS_L, pfvfspoof);
+	}
+}
+
+/**
+ *  ngbe_get_device_caps - Get additional device capabilities
+ *  @hw: pointer to hardware structure
+ *  @device_caps: the EEPROM word with the extra device capabilities
+ *
+ *  This function will read the EEPROM location for the device capabilities,
+ *  and return the word through device_caps.
+ **/
+s32 ngbe_get_device_caps(struct ngbe_hw *hw, u16 *device_caps)
+{
+	DEBUGFUNC("\n");
+
+	TCALL(hw, eeprom.ops.read,
+		hw->eeprom.sw_region_offset + NGBE_DEVICE_CAPS, device_caps);
+
+	return 0;
+}
+
+/**
+ *  ngbe_calculate_checksum - Calculate checksum for buffer
+ *  @buffer: pointer to EEPROM
+ *  @length: size of EEPROM to calculate a checksum for
+ *  Calculates the checksum for some buffer on a specified length.  The
+ *  checksum calculated is returned.
+ **/
+u8 ngbe_calculate_checksum(u8 *buffer, u32 length)
+{
+	u32 i;
+	u8 sum = 0;
+
+	DEBUGFUNC("\n");
+
+	if (!buffer)
+		return 0;
+
+	for (i = 0; i < length; i++)
+		sum += buffer[i];
+
+	return (u8) (0 - sum);
+}
+
+
+s32 ngbe_host_interface_pass_command(struct ngbe_hw *hw, u32 *buffer,
+				 u32 length, u32 timeout, bool return_data)
+{
+	u32 i;
+	u32 dword_len;
+	s32 status = 0;
+
+	DEBUGFUNC("\n");
+
+	if (length == 0 || length > NGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+		DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
+		return NGBE_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	if (TCALL(hw, mac.ops.acquire_swfw_sync, NGBE_MNG_SWFW_SYNC_SW_MB)
+	    != 0) {
+		return NGBE_ERR_SWFW_SYNC;
+	}
+
+	/* Calculate length in DWORDs. We must be DWORD aligned */
+	if ((length % (sizeof(u32))) != 0) {
+		DEBUGOUT("Buffer length failure, not aligned to dword");
+		status = NGBE_ERR_INVALID_ARGUMENT;
+		goto rel_out;
+	}
+
+	dword_len = length >> 2;
+
+	/* The device driver writes the relevant command block
+	 * into the ram area.
+	 */
+	for (i = 0; i < dword_len; i++) {
+		if (ngbe_check_mng_access(hw))
+			wr32a(hw, NGBE_MNG_MBOX,
+				      i, NGBE_CPU_TO_LE32(buffer[i]));
+		else {
+			status = NGBE_ERR_MNG_ACCESS_FAILED;
+			goto rel_out;
+		}
+	}
+	/* Setting this bit tells the ARC that a new command is pending. */
+	if (ngbe_check_mng_access(hw))
+		wr32m(hw, NGBE_MNG_MBOX_CTL,
+			NGBE_MNG_MBOX_CTL_SWRDY, NGBE_MNG_MBOX_CTL_SWRDY);
+	else {
+		status = NGBE_ERR_MNG_ACCESS_FAILED;
+		goto rel_out;
+	}
+
+rel_out:
+	TCALL(hw, mac.ops.release_swfw_sync, NGBE_MNG_SWFW_SYNC_SW_MB);
+	return status;
+}
+
+/**
+ *  ngbe_host_interface_command - Issue command to manageability block
+ *  @hw: pointer to the HW structure
+ *  @buffer: contains the command to write and where the return status will
+ *   be placed
+ *  @length: length of buffer, must be multiple of 4 bytes
+ *  @timeout: time in ms to wait for command completion
+ *  @return_data: read and return data from the buffer (true) or not (false)
+ *   Needed because FW structures are big endian and decoding of
+ *   these fields can be 8 bit or 16 bit based on command. Decoding
+ *   is not easily understood without making a table of commands.
+ *   So we will leave this up to the caller to read back the data
+ *   in these cases.
+ *
+ *  Communicates with the manageability block.  On success return 0
+ *  else return NGBE_ERR_HOST_INTERFACE_COMMAND.
+ **/
+s32 ngbe_host_interface_command(struct ngbe_hw *hw, u32 *buffer,
+				 u32 length, u32 timeout, bool return_data)
+{
+	u32 hicr, i, bi;
+	u32 hdr_size = sizeof(struct ngbe_hic_hdr);
+	u16 buf_len;
+	u32 dword_len;
+	s32 status = 0;
+	u32 buf[64] = {};
+
+	DEBUGFUNC("\n");
+
+	if (length == 0 || length > NGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+		DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
+		return NGBE_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	if (TCALL(hw, mac.ops.acquire_swfw_sync, NGBE_MNG_SWFW_SYNC_SW_MB)
+	    != 0) {
+		return NGBE_ERR_SWFW_SYNC;
+	}
+
+
+	/* Calculate length in DWORDs. We must be DWORD aligned */
+	if ((length % (sizeof(u32))) != 0) {
+		DEBUGOUT("Buffer length failure, not aligned to dword");
+		status = NGBE_ERR_INVALID_ARGUMENT;
+		goto rel_out;
+	}
+
+	/*read to clean all status*/
+	if (ngbe_check_mng_access(hw)) {
+		hicr = rd32(hw, NGBE_MNG_MBOX_CTL);
+		if ((hicr & NGBE_MNG_MBOX_CTL_FWRDY))
+			ERROR_REPORT1(NGBE_ERROR_CAUTION,
+							"fwrdy is set before command.\n");
+	}
+
+	dword_len = length >> 2;
+
+	/* The device driver writes the relevant command block
+	 * into the ram area.
+	 */
+	for (i = 0; i < dword_len; i++) {
+		if (ngbe_check_mng_access(hw))
+			wr32a(hw, NGBE_MNG_MBOX,
+				      i, NGBE_CPU_TO_LE32(buffer[i]));
+		else {
+			status = NGBE_ERR_MNG_ACCESS_FAILED;
+			goto rel_out;
+		}
+	}
+	/* Setting this bit tells the ARC that a new command is pending. */
+	if (ngbe_check_mng_access(hw))
+		wr32m(hw, NGBE_MNG_MBOX_CTL,
+			NGBE_MNG_MBOX_CTL_SWRDY, NGBE_MNG_MBOX_CTL_SWRDY);
+	else {
+		status = NGBE_ERR_MNG_ACCESS_FAILED;
+		goto rel_out;
+	}
+
+	for (i = 0; i < timeout; i++) {
+		if (ngbe_check_mng_access(hw)) {
+			hicr = rd32(hw, NGBE_MNG_MBOX_CTL);
+			if ((hicr & NGBE_MNG_MBOX_CTL_FWRDY))
+				break;
+		}
+		msec_delay(1);
+	}
+
+	buf[0] = rd32(hw, NGBE_MNG_MBOX);
+	/* Check command completion */
+	if (timeout != 0 && i == timeout) {
+		ERROR_REPORT1(NGBE_ERROR_CAUTION,
+			     "Command has failed with no status valid.\n");
+		printk("===%x= %x=\n", buffer[0] & 0xff, (~buf[0] >> 24));
+		printk("===%08x\n", rd32(hw, 0x1e100));
+		printk("===%08x\n", rd32(hw, 0x1e104));
+		printk("===%08x\n", rd32(hw, 0x1e108));
+		printk("===%08x\n", rd32(hw, 0x1e10c));
+		printk("===%08x\n", rd32(hw, 0x1e044));
+		printk("===%08x\n", rd32(hw, 0x10000));
+		if ((buffer[0] & 0xff) != (~buf[0] >> 24)) {
+			status = NGBE_ERR_HOST_INTERFACE_COMMAND;
+			goto rel_out;
+		}
+	}
+
+	if (!return_data)
+		goto rel_out;
+
+	/* Calculate length in DWORDs */
+	dword_len = hdr_size >> 2;
+
+	/* first pull in the header so we know the buffer length */
+	for (bi = 0; bi < dword_len; bi++) {
+		if (ngbe_check_mng_access(hw)) {
+			buffer[bi] = rd32a(hw, NGBE_MNG_MBOX,
+							bi);
+			NGBE_LE32_TO_CPUS(&buffer[bi]);
+		} else {
+			status = NGBE_ERR_MNG_ACCESS_FAILED;
+			goto rel_out;
+		}
+	}
+
+	/* If there is any thing in data position pull it in */
+	buf_len = ((struct ngbe_hic_hdr *)buffer)->buf_len;
+	if (buf_len == 0)
+		goto rel_out;
+
+	if (length < buf_len + hdr_size) {
+		DEBUGOUT("Buffer not large enough for reply message.\n");
+		status = NGBE_ERR_HOST_INTERFACE_COMMAND;
+		goto rel_out;
+	}
+
+	/* Calculate length in DWORDs, add 3 for odd lengths */
+	dword_len = (buf_len + 3) >> 2;
+
+	/* Pull in the rest of the buffer (bi is where we left off) */
+	for (; bi <= dword_len; bi++) {
+		if (ngbe_check_mng_access(hw)) {
+			buffer[bi] = rd32a(hw, NGBE_MNG_MBOX,
+							bi);
+			NGBE_LE32_TO_CPUS(&buffer[bi]);
+		} else {
+			status = NGBE_ERR_MNG_ACCESS_FAILED;
+			goto rel_out;
+		}
+	}
+
+rel_out:
+	TCALL(hw, mac.ops.release_swfw_sync, NGBE_MNG_SWFW_SYNC_SW_MB);
+	return status;
+}
+
+/**
+ *  ngbe_set_fw_drv_ver - Sends driver version to firmware
+ *  @hw: pointer to the HW structure
+ *  @maj: driver version major number
+ *  @min: driver version minor number
+ *  @build: driver version build number
+ *  @sub: driver version sub build number
+ *
+ *  Sends driver version number to firmware through the manageability
+ *  block.  On success return 0
+ *  else returns NGBE_ERR_SWFW_SYNC when encountering an error acquiring
+ *  semaphore or NGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ **/
+s32 ngbe_set_fw_drv_ver(struct ngbe_hw *hw, u8 maj, u8 min,
+				 u8 build, u8 sub)
+{
+	struct ngbe_hic_drv_info fw_cmd;
+	int i;
+	s32 ret_val = 0;
+
+	DEBUGFUNC("\n");
+
+	fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO;
+	fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN;
+	fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
+	fw_cmd.port_num = (u8)hw->bus.func;
+	fw_cmd.ver_maj = maj;
+	fw_cmd.ver_min = min;
+	fw_cmd.ver_build = build;
+	fw_cmd.ver_sub = sub;
+	fw_cmd.hdr.checksum = 0;
+	fw_cmd.hdr.checksum = ngbe_calculate_checksum((u8 *)&fw_cmd,
+				(FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len));
+	fw_cmd.pad = 0;
+	fw_cmd.pad2 = 0;
+
+	for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
+		ret_val = ngbe_host_interface_command(hw, (u32 *)&fw_cmd,
+						       sizeof(fw_cmd),
+						       NGBE_HI_COMMAND_TIMEOUT,
+						       true);
+		if (ret_val != 0)
+			continue;
+
+		if (fw_cmd.hdr.cmd_or_resp.ret_status ==
+		    FW_CEM_RESP_STATUS_SUCCESS)
+			ret_val = 0;
+		else
+			ret_val = NGBE_ERR_HOST_INTERFACE_COMMAND;
+
+		break;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ngbe_reset_hostif - send reset cmd to fw
+ *  @hw: pointer to hardware structure
+ *
+ *  Sends reset cmd to firmware through the manageability
+ *  block.  On success return 0
+ *  else returns NGBE_ERR_SWFW_SYNC when encountering an error acquiring
+ *  semaphore or NGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ **/
+s32 ngbe_reset_hostif(struct ngbe_hw *hw)
+{
+	struct ngbe_hic_reset reset_cmd;
+	int i;
+	s32 status = 0;
+
+	DEBUGFUNC("\n");
+
+	reset_cmd.hdr.cmd = FW_RESET_CMD;
+	reset_cmd.hdr.buf_len = FW_RESET_LEN;
+	reset_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
+	reset_cmd.lan_id = hw->bus.lan_id;
+	reset_cmd.reset_type = (u16)hw->reset_type;
+	reset_cmd.hdr.checksum = 0;
+	reset_cmd.hdr.checksum = ngbe_calculate_checksum((u8 *)&reset_cmd,
+				(FW_CEM_HDR_LEN + reset_cmd.hdr.buf_len));
+
+	/* send reset request to FW and wait for response */
+	for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
+		status = ngbe_host_interface_command(hw, (u32 *)&reset_cmd,
+						       sizeof(reset_cmd),
+						       NGBE_HI_COMMAND_TIMEOUT,
+						       true);
+		msleep(1);
+		if (status != 0)
+			continue;
+
+		if (reset_cmd.hdr.cmd_or_resp.ret_status ==
+			FW_CEM_RESP_STATUS_SUCCESS)
+			status = 0;
+		else
+			status = NGBE_ERR_HOST_INTERFACE_COMMAND;
+
+		break;
+	}
+
+	return status;
+}
+
+s32 ngbe_setup_mac_link_hostif(struct ngbe_hw *hw, u32 speed)
+{
+	struct ngbe_hic_phy_cfg cmd;
+	int i;
+	s32 status = 0;
+
+	DEBUGFUNC("\n");
+
+	cmd.hdr.cmd = FW_SETUP_MAC_LINK_CMD;
+	cmd.hdr.buf_len = FW_SETUP_MAC_LINK_LEN;
+	cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
+	cmd.lan_id = hw->bus.lan_id;
+	cmd.phy_mode = 0;
+	cmd.phy_speed = (u16)speed;
+	cmd.hdr.checksum = 0;
+	cmd.hdr.checksum = ngbe_calculate_checksum((u8 *)&cmd,
+				(FW_CEM_HDR_LEN + cmd.hdr.buf_len));
+
+	for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
+		status = ngbe_host_interface_command(hw, (u32 *)&cmd,
+						       sizeof(cmd),
+						       NGBE_HI_COMMAND_TIMEOUT,
+						       true);
+		if (status != 0)
+			continue;
+
+		if (cmd.hdr.cmd_or_resp.ret_status ==
+		    FW_CEM_RESP_STATUS_SUCCESS)
+			status = 0;
+		else
+			status = NGBE_ERR_HOST_INTERFACE_COMMAND;
+
+		break;
+	}
+
+	return status;
+}
+
+u16 ngbe_crc16_ccitt(const u8 *buf, int size)
+{
+	u16 crc = 0;
+	int i;
+	while (--size >= 0) {
+		crc ^= (u16)*buf++ << 8;
+		for (i = 0; i < 8; i++) {
+			if (crc & 0x8000)
+				crc = crc << 1 ^ 0x1021;
+			else
+				crc <<= 1;
+		}
+	}
+	return crc;
+}
+
+s32 ngbe_upgrade_flash_hostif(struct ngbe_hw *hw, u32 region,
+				const u8 *data, u32 size)
+{
+	struct ngbe_hic_upg_start start_cmd;
+	struct ngbe_hic_upg_write write_cmd;
+	struct ngbe_hic_upg_verify verify_cmd;
+	u32 offset;
+	s32 status = 0;
+
+	DEBUGFUNC("\n");
+
+	start_cmd.hdr.cmd = FW_FLASH_UPGRADE_START_CMD;
+	start_cmd.hdr.buf_len = FW_FLASH_UPGRADE_START_LEN;
+	start_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
+	start_cmd.module_id = (u8)region;
+	start_cmd.hdr.checksum = 0;
+	start_cmd.hdr.checksum = ngbe_calculate_checksum((u8 *)&start_cmd,
+				(FW_CEM_HDR_LEN + start_cmd.hdr.buf_len));
+	start_cmd.pad2 = 0;
+	start_cmd.pad3 = 0;
+
+	status = ngbe_host_interface_command(hw, (u32 *)&start_cmd,
+					       sizeof(start_cmd),
+					       NGBE_HI_FLASH_ERASE_TIMEOUT,
+					       true);
+
+	if (start_cmd.hdr.cmd_or_resp.ret_status == FW_CEM_RESP_STATUS_SUCCESS)
+		status = 0;
+	else {
+		status = NGBE_ERR_HOST_INTERFACE_COMMAND;
+		return status;
+	}
+
+	for (offset = 0; offset < size;) {
+		write_cmd.hdr.cmd = FW_FLASH_UPGRADE_WRITE_CMD;
+		if (size - offset > 248) {
+			write_cmd.data_len = 248 / 4;
+			write_cmd.eof_flag = 0;
+		} else {
+			write_cmd.data_len = (u8)((size - offset) / 4);
+			write_cmd.eof_flag = 1;
+		}
+		memcpy((u8 *)write_cmd.data, &data[offset], write_cmd.data_len * 4);
+		write_cmd.hdr.buf_len = (write_cmd.data_len + 1) * 4;
+		write_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
+		write_cmd.check_sum = ngbe_crc16_ccitt((u8 *)write_cmd.data,
+							write_cmd.data_len * 4);
+
+		status = ngbe_host_interface_command(hw, (u32 *)&write_cmd,
+						sizeof(write_cmd),
+						NGBE_HI_FLASH_UPDATE_TIMEOUT,
+						true);
+		if (start_cmd.hdr.cmd_or_resp.ret_status ==
+						FW_CEM_RESP_STATUS_SUCCESS)
+			status = 0;
+		else {
+			status = NGBE_ERR_HOST_INTERFACE_COMMAND;
+			return status;
+		}
+		offset += write_cmd.data_len * 4;
+	}
+
+	verify_cmd.hdr.cmd = FW_FLASH_UPGRADE_VERIFY_CMD;
+	verify_cmd.hdr.buf_len = FW_FLASH_UPGRADE_VERIFY_LEN;
+	verify_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
+	switch (region) {
+	case NGBE_MODULE_EEPROM:
+		verify_cmd.action_flag = NGBE_RELOAD_EEPROM;
+		break;
+	case NGBE_MODULE_FIRMWARE:
+		verify_cmd.action_flag = NGBE_RESET_FIRMWARE;
+		break;
+	case NGBE_MODULE_HARDWARE:
+		verify_cmd.action_flag = NGBE_RESET_LAN;
+		break;
+	default:
+		ERROR_REPORT1(NGBE_ERROR_ARGUMENT,
+				"ngbe_upgrade_flash_hostif: region err %x\n", region);
+		return status;
+	}
+
+	verify_cmd.hdr.checksum = ngbe_calculate_checksum((u8 *)&verify_cmd,
+				(FW_CEM_HDR_LEN + verify_cmd.hdr.buf_len));
+
+	status = ngbe_host_interface_command(hw, (u32 *)&verify_cmd,
+					       sizeof(verify_cmd),
+					       NGBE_HI_FLASH_VERIFY_TIMEOUT,
+					       true);
+
+	if (verify_cmd.hdr.cmd_or_resp.ret_status == FW_CEM_RESP_STATUS_SUCCESS)
+		status = 0;
+	else {
+		status = NGBE_ERR_HOST_INTERFACE_COMMAND;
+	}
+	return status;
+}
+
+/* cmd_addr is used for some special command:
+**	 1. to be sector address, when implemented erase sector command
+**	 2. to be flash address when implemented read, write flash address
+*/
+u8 fmgr_cmd_op(struct ngbe_hw *hw, u32 cmd, u32 cmd_addr)
+{
+	u32 cmd_val = 0;
+	u32 time_out = 0;
+
+	cmd_val = (cmd << SPI_CLK_CMD_OFFSET) | (SPI_CLK_DIV << SPI_CLK_DIV_OFFSET) | cmd_addr;
+	wr32(hw, SPI_H_CMD_REG_ADDR, cmd_val);
+	while (1) {
+		if (rd32(hw, SPI_H_STA_REG_ADDR) & 0x1)
+			break;
+
+		if (time_out == SPI_TIME_OUT_VALUE)
+			return 1;
+
+		time_out = time_out + 1;
+		udelay(10);
+	}
+
+	return 0;
+}
+
+u8 fmgr_usr_cmd_op(struct ngbe_hw *hw, u32 usr_cmd)
+{
+	u8 status = 0;
+
+	wr32(hw, SPI_H_USR_CMD_REG_ADDR, usr_cmd);
+	status = fmgr_cmd_op(hw, SPI_CMD_USER_CMD, 0);
+
+	return status;
+}
+
+u8 flash_erase_chip(struct ngbe_hw *hw)
+{
+	u8 status = fmgr_cmd_op(hw, SPI_CMD_ERASE_CHIP, 0);
+	return status;
+}
+
+u8 flash_erase_sector(struct ngbe_hw *hw, u32 sec_addr)
+{
+	u8 status = fmgr_cmd_op(hw, SPI_CMD_ERASE_SECTOR, sec_addr);
+	return status;
+}
+
+u32 flash_read_dword(struct ngbe_hw *hw, u32 addr)
+{
+	u8 status = fmgr_cmd_op(hw, SPI_CMD_READ_DWORD, addr);
+	if (status)
+		return (u32)status;
+
+	return rd32(hw, SPI_H_DAT_REG_ADDR);
+}
+
+u8 flash_write_dword(struct ngbe_hw *hw, u32 addr, u32 dword)
+{
+	u8 status = 0;
+
+	wr32(hw, SPI_H_DAT_REG_ADDR, dword);
+	status = fmgr_cmd_op(hw, SPI_CMD_WRITE_DWORD, addr);
+	if (status)
+		return status;
+
+	if (dword != flash_read_dword(hw, addr)) {
+		return 1;
+	}
+
+	return 0;
+}
+
+int ngbe_flash_write_cab(struct ngbe_hw *hw, u32 addr, u32 value, u16 lan_id)
+{
+	int status;
+	struct ngbe_hic_read_cab buffer;
+
+	buffer.hdr.req.cmd = 0xE2;
+	buffer.hdr.req.buf_lenh = 0x6;
+	buffer.hdr.req.buf_lenl = 0x0;
+	buffer.hdr.req.checksum = 0xFF;
+
+	/* convert offset from words to bytes */
+	buffer.dbuf.d16[0] = cpu_to_le16(lan_id);
+	/* one word */
+	buffer.dbuf.d32[0] = htonl(addr);
+	buffer.dbuf.d32[1] = htonl(value);
+
+	status = ngbe_host_interface_command(hw, (u32 *)&buffer,
+						sizeof(buffer), 5000, true);
+	printk("0x1e100 :%08x\n", rd32(hw, 0x1e100));
+	printk("0x1e104 :%08x\n", rd32(hw, 0x1e104));
+	printk("0x1e108 :%08x\n", rd32(hw, 0x1e108));
+	printk("0x1e10c :%08x\n", rd32(hw, 0x1e10c));
+
+	return status;
+}
+
+int ngbe_flash_read_cab(struct ngbe_hw *hw, u32 addr, u16 lan_id)
+{
+	int status;
+	struct ngbe_hic_read_cab buffer;
+	u16 *data = NULL;
+
+	buffer.hdr.req.cmd = 0xE1;
+	buffer.hdr.req.buf_lenh = 0xaa;
+	buffer.hdr.req.buf_lenl = 0;
+	buffer.hdr.req.checksum = 0xFF;
+
+	/* convert offset from words to bytes */
+	buffer.dbuf.d16[0] = cpu_to_le16(lan_id);
+	/* one word */
+	buffer.dbuf.d32[0] = htonl(addr);
+
+	status = ngbe_host_interface_command(hw, (u32 *)&buffer,
+						sizeof(buffer), 5000, true);
+
+	if (status)
+		return status;
+	if (ngbe_check_mng_access(hw)) {
+		*data = (u16)rd32a(hw, 0x1e100, 3);
+		printk("0x1e100 :%08x\n", rd32(hw, 0x1e100));
+		printk("0x1e104 :%08x\n", rd32(hw, 0x1e104));
+		printk("0x1e108 :%08x\n", rd32(hw, 0x1e108));
+		printk("0x1e10c :%08x\n", rd32(hw, 0x1e10c));
+	} else {
+		status = -147;
+		return status;
+	}
+
+	return rd32(hw, 0x1e108);
+}
+
+int ngbe_flash_write_unlock(struct ngbe_hw *hw)
+{
+	int status;
+	struct ngbe_hic_read_shadow_ram buffer;
+
+	buffer.hdr.req.cmd = 0x40;
+	buffer.hdr.req.buf_lenh = 0;
+	buffer.hdr.req.buf_lenl = 0;
+	buffer.hdr.req.checksum = 0xFF;
+
+	/* convert offset from words to bytes */
+	buffer.address = 0;
+	/* one word */
+	buffer.length = 0;
+
+	status = ngbe_host_interface_command(hw, (u32 *)&buffer,
+						sizeof(buffer), 5000, false);
+	if (status)
+		return status;
+
+	return status;
+}
+
+int ngbe_flash_write_lock(struct ngbe_hw *hw)
+{
+	int status;
+	struct ngbe_hic_read_shadow_ram buffer;
+
+	buffer.hdr.req.cmd = 0x39;
+	buffer.hdr.req.buf_lenh = 0;
+	buffer.hdr.req.buf_lenl = 0;
+	buffer.hdr.req.checksum = 0xFF;
+
+	/* convert offset from words to bytes */
+	buffer.address = 0;
+	/* one word */
+	buffer.length = 0;
+
+	status = ngbe_host_interface_command(hw, (u32 *)&buffer,
+						sizeof(buffer), 5000, false);
+	if (status)
+		return status;
+
+	return status;
+}
+
+int ngbe_upgrade_flash(struct ngbe_hw *hw, u32 region,
+				const u8 *data, u32 size)
+{
+	u32 sector_num = 0;
+	u32 read_data = 0;
+	u8  status = 0;
+	u8  skip = 0;
+	u32 i = 0, k = 0, n = 0;
+	u8  flash_vendor = 0;
+	u32 num[256] = {0};
+	u32 mac_addr0_dword0_t, mac_addr0_dword1_t;
+	u32 mac_addr1_dword0_t, mac_addr1_dword1_t;
+	u32 mac_addr2_dword0_t, mac_addr2_dword1_t;
+	u32 mac_addr3_dword0_t, mac_addr3_dword1_t;
+	u32 serial_num_dword0_t, serial_num_dword1_t, serial_num_dword2_t;
+
+	/*check sub_id*/;
+	printk("Checking sub_id .......\n");
+	printk("The card's sub_id : %04x\n", hw->subsystem_device_id);
+	printk("The image's sub_id : %04x\n", data[0xfffdc] << 8  | data[0xfffdd]);
+	if ((hw->subsystem_device_id & 0xffff) ==
+		((data[0xfffdc] << 8 | data[0xfffdd]) & 0xffff)) {
+		printk("It is a right image\n");
+	} else if (hw->subsystem_device_id == 0xffff) {
+		printk("update anyway\n");
+	} else {
+		printk("====The Gigabit image do not match the Gigabit card====\n");
+		printk("====Please check your image====\n");
+		return -EOPNOTSUPP;
+	}
+
+	/*check dev_id*/
+	printk("Checking dev_id .......\n");
+	printk("The image's dev_id : %04x\n", data[0xfffde] << 8 | data[0xfffdf]);
+	printk("The card's dev_id : %04x\n", hw->device_id);
+	if (!((hw->device_id & 0xffff) ==
+		((data[0xfffde] << 8 | data[0xfffdf]) & 0xffff))
+		&& !(hw->device_id == 0xffff)) {
+		printk("====The Gigabit image is not match the Gigabit card====\n");
+		printk("====Please check your image====\n");
+		return -EOPNOTSUPP;
+	}
+
+	// unlock flash write protect
+	ngbe_release_eeprom_semaphore(hw);
+	ngbe_flash_write_unlock(hw);
+
+	wr32(hw, 0x10114, 0x9f050206);
+	wr32(hw, 0x10194, 0x9f050206);
+
+	ngbe_flash_write_cab(hw, 0x188, 0, 0);
+	ngbe_flash_write_cab(hw, 0x184, 0x60000000, 0);
+	msleep(1000);
+
+	mac_addr0_dword0_t = flash_read_dword(hw, MAC_ADDR0_WORD0_OFFSET_1G);
+	mac_addr0_dword1_t = flash_read_dword(hw, MAC_ADDR0_WORD1_OFFSET_1G) & 0xffff;
+	mac_addr1_dword0_t = flash_read_dword(hw, MAC_ADDR1_WORD0_OFFSET_1G);
+	mac_addr1_dword1_t = flash_read_dword(hw, MAC_ADDR1_WORD1_OFFSET_1G) & 0xffff;
+	mac_addr2_dword0_t = flash_read_dword(hw, MAC_ADDR2_WORD0_OFFSET_1G);
+	mac_addr2_dword1_t = flash_read_dword(hw, MAC_ADDR2_WORD1_OFFSET_1G) & 0xffff;
+	mac_addr3_dword0_t = flash_read_dword(hw, MAC_ADDR3_WORD0_OFFSET_1G);
+	mac_addr3_dword1_t = flash_read_dword(hw, MAC_ADDR3_WORD1_OFFSET_1G) & 0xffff;
+
+	serial_num_dword0_t = flash_read_dword(hw, PRODUCT_SERIAL_NUM_OFFSET_1G);
+	serial_num_dword1_t = flash_read_dword(hw, PRODUCT_SERIAL_NUM_OFFSET_1G + 4);
+	serial_num_dword2_t = flash_read_dword(hw, PRODUCT_SERIAL_NUM_OFFSET_1G + 8);
+	printk("Old: MAC Address0 is: 0x%04x%08x\n", mac_addr0_dword1_t,
+												 mac_addr0_dword0_t);
+	printk("	 MAC Address1 is: 0x%04x%08x\n", mac_addr1_dword1_t,
+												 mac_addr1_dword0_t);
+	printk("	 MAC Address2 is: 0x%04x%08x\n", mac_addr2_dword1_t,
+												 mac_addr2_dword0_t);
+	printk("	 MAC Address3 is: 0x%04x%08x\n", mac_addr3_dword1_t,
+												 mac_addr3_dword0_t);
+
+	for (k = 0; k < (1024 / 4); k++) {
+		num[k] = flash_read_dword(hw, 0xfe000 + k * 4);
+	}
+
+	status = fmgr_usr_cmd_op(hw, 0x6);  // write enable
+	status = fmgr_usr_cmd_op(hw, 0x98); // global protection un-lock
+	msleep(1000); // 1s
+
+	// Note: for Spanish FLASH, first 8 sectors (4KB) in sector0 (64KB) need to use
+	// a special erase command (4K sector erase)
+	if (flash_vendor == 1) {
+		wr32(hw, SPI_CMD_CFG1_ADDR, 0x0103c720);
+		for (i = 0; i < 8; i++) {
+			flash_erase_sector(hw, i*128);
+			msleep(20); // 20 ms
+		}
+		wr32(hw, SPI_CMD_CFG1_ADDR, 0x0103c7d8);
+	}
+
+	/* Winbond Flash, erase chip command is okay, but erase sector doestn't work*/
+	sector_num = size / SPI_SECTOR_SIZE;
+	if (flash_vendor == 2) {
+		status = flash_erase_chip(hw);
+		printk("Erase chip command, return status = %0d\n", status);
+		msleep(1000); // 1 s
+	} else {
+		wr32(hw, SPI_CMD_CFG1_ADDR, 0x0103c720);
+		for (i = 0; i < sector_num; i++) {
+			status = flash_erase_sector(hw, i * SPI_SECTOR_SIZE);
+			printk("Erase sector[%2d] command, return status = %0d\n", i, status);
+			msleep(50); // 50 ms
+		}
+		wr32(hw, SPI_CMD_CFG1_ADDR, 0x0103c7d8);
+	}
+
+	// Program Image file in dword
+	for (i = 0; i < size / 4; i++) {
+		read_data = data[4 * i + 3] << 24 | data[4 * i + 2] << 16 |
+					data[4 * i + 1] << 8 | data[4 * i];
+		read_data = __le32_to_cpu(read_data);
+		skip = ((i * 4 == MAC_ADDR0_WORD0_OFFSET_1G) ||
+				(i * 4 == MAC_ADDR0_WORD1_OFFSET_1G) ||
+				(i * 4 == MAC_ADDR1_WORD0_OFFSET_1G) ||
+				(i * 4 == MAC_ADDR1_WORD1_OFFSET_1G) ||
+				(i * 4 == MAC_ADDR2_WORD0_OFFSET_1G) ||
+				(i * 4 == MAC_ADDR2_WORD1_OFFSET_1G) ||
+				(i * 4 == MAC_ADDR3_WORD0_OFFSET_1G) ||
+				(i * 4 == MAC_ADDR3_WORD1_OFFSET_1G) ||
+				(i * 4 >= PRODUCT_SERIAL_NUM_OFFSET_1G &&
+				 i * 4 <= PRODUCT_SERIAL_NUM_OFFSET_1G + 8));
+		if (read_data != 0xffffffff && !skip) {
+			status = flash_write_dword(hw, i * 4, read_data);
+			if (status) {
+				printk("ERROR: Program 0x%08x @addr: 0x%08x is failed !!\n",
+																read_data, i * 4);
+				read_data = flash_read_dword(hw, i * 4);
+				printk("		 Read data from Flash is: 0x%08x\n", read_data);
+				return 1;
+			}
+		}
+		if (i % 1024 == 0) {
+			printk("\b\b\b\b%3d%%", (int)(i * 4 * 100 / size));
+		}
+	}
+
+	flash_write_dword(hw, MAC_ADDR0_WORD0_OFFSET_1G,
+										 mac_addr0_dword0_t);
+	flash_write_dword(hw, MAC_ADDR0_WORD1_OFFSET_1G,
+										(mac_addr0_dword1_t | 0x80000000));//lan0
+	flash_write_dword(hw, MAC_ADDR1_WORD0_OFFSET_1G,
+										 mac_addr1_dword0_t);
+	flash_write_dword(hw, MAC_ADDR1_WORD1_OFFSET_1G,
+										(mac_addr1_dword1_t | 0x80000000));//lan1
+	flash_write_dword(hw, MAC_ADDR2_WORD0_OFFSET_1G,
+										 mac_addr2_dword0_t);
+	flash_write_dword(hw, MAC_ADDR2_WORD1_OFFSET_1G,
+										(mac_addr2_dword1_t | 0x80000000));//lan2
+	flash_write_dword(hw, MAC_ADDR3_WORD0_OFFSET_1G,
+										 mac_addr3_dword0_t);
+	flash_write_dword(hw, MAC_ADDR3_WORD1_OFFSET_1G,
+										(mac_addr3_dword1_t | 0x80000000));//lan3
+	flash_write_dword(hw, PRODUCT_SERIAL_NUM_OFFSET_1G, serial_num_dword0_t);
+	flash_write_dword(hw, PRODUCT_SERIAL_NUM_OFFSET_1G+4, serial_num_dword1_t);
+	flash_write_dword(hw, PRODUCT_SERIAL_NUM_OFFSET_1G+8, serial_num_dword2_t);
+
+	for (n = 0; n < 1024/4; n++) {
+		if (!(num[n] == 0xffffffff))
+			flash_write_dword(hw, 0xfe000 + n * 4, num[n]);
+	}
+
+	return 0;
+}
+
+/**
+ * ngbe_set_rxpba - Initialize Rx packet buffer
+ * @hw: pointer to hardware structure
+ * @num_pb: number of packet buffers to allocate
+ * @headroom: reserve n KB of headroom
+ * @strategy: packet buffer allocation strategy
+ **/
+void ngbe_set_rxpba(struct ngbe_hw *hw, int num_pb, u32 headroom,
+			     int strategy)
+{
+	u32 pbsize = hw->mac.rx_pb_size;
+	u32 rxpktsize, txpktsize, txpbthresh;
+
+	DEBUGFUNC("\n");
+
+	/* Reserve headroom */
+	pbsize -= headroom;
+
+	if (!num_pb)
+		num_pb = 1;
+
+	/* Divide remaining packet buffer space amongst the number of packet
+	 * buffers requested using supplied strategy.
+	 */
+	switch (strategy) {
+	case PBA_STRATEGY_EQUAL:
+		rxpktsize = (pbsize / num_pb) << NGBE_RDB_PB_SZ_SHIFT;
+		wr32(hw, NGBE_RDB_PB_SZ, rxpktsize);
+		break;
+	default:
+		break;
+	}
+
+	/* Only support an equally distributed Tx packet buffer strategy. */
+	txpktsize = NGBE_TDB_PB_SZ_MAX / num_pb;
+	txpbthresh = (txpktsize / NGBE_KB_TO_B) - NGBE_TXPKT_SIZE_MAX;
+
+	wr32(hw, NGBE_TDB_PB_SZ, txpktsize);
+	wr32(hw, NGBE_TDM_PB_THRE, txpbthresh);
+}
+
+STATIC const u8 ngbe_emc_temp_data[4] = {
+	NGBE_EMC_INTERNAL_DATA,
+	NGBE_EMC_DIODE1_DATA,
+	NGBE_EMC_DIODE2_DATA,
+	NGBE_EMC_DIODE3_DATA
+};
+
+STATIC const u8 ngbe_emc_therm_limit[4] = {
+	NGBE_EMC_INTERNAL_THERM_LIMIT,
+	NGBE_EMC_DIODE1_THERM_LIMIT,
+	NGBE_EMC_DIODE2_THERM_LIMIT,
+	NGBE_EMC_DIODE3_THERM_LIMIT
+};
+
+/**
+ *  ngbe_get_thermal_sensor_data - Gathers thermal sensor data
+ *  @hw: pointer to hardware structure
+ *  @data: pointer to the thermal sensor data structure
+ *
+ * algorithm:
+ * T = (-4.8380E+01)N^0 + (3.1020E-01)N^1 + (-1.8201E-04)N^2 +
+		       (8.1542E-08)N^3 + (-1.6743E-11)N^4
+ * algorithm with 5% more deviation, easy for implementation
+ * T = (-50)N^0 + (0.31)N^1 + (-0.0002)N^2 + (0.0000001)N^3
+ *
+ *  Returns the thermal sensor data structure
+ **/
+s32 ngbe_get_thermal_sensor_data(struct ngbe_hw *hw)
+{
+	s64 tsv;
+	struct ngbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+	DEBUGFUNC("\n");
+
+	/* Only support thermal sensors attached to physical port 0 */
+	if (hw->bus.lan_id)
+		return NGBE_NOT_IMPLEMENTED;
+
+	tsv = (s64)(rd32(hw, NGBE_TS_ST) &
+		NGBE_TS_ST_DATA_OUT_MASK);
+	/* 216 < tsv < 876 */
+
+	tsv = tsv < 876 ? tsv : 876;
+	tsv = tsv - 216;
+	tsv = tsv/4;
+	tsv = tsv - 40;
+	data->sensor.temp = (s16)tsv;
+
+	return 0;
+}
+
+/**
+ *  ngbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds
+ *  @hw: pointer to hardware structure
+ *
+ *  Inits the thermal sensor thresholds according to the NVM map
+ *  and save off the threshold and location values into mac.thermal_sensor_data
+ **/
+s32 ngbe_init_thermal_sensor_thresh(struct ngbe_hw *hw)
+{
+	s32 status = 0;
+
+	struct ngbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+	DEBUGFUNC("\n");
+
+	memset(data, 0, sizeof(struct ngbe_thermal_sensor_data));
+
+	/* Only support thermal sensors attached to SP physical port 0 */
+	if (hw->bus.lan_id)
+		return NGBE_NOT_IMPLEMENTED;
+
+	wr32(hw, NGBE_TS_INT_EN, NGBE_TS_INT_EN_DALARM_INT_EN | NGBE_TS_INT_EN_ALARM_INT_EN);
+
+	wr32(hw, NGBE_TS_EN, NGBE_TS_EN_ENA);
+
+	data->sensor.alarm_thresh = 115;
+	wr32(hw, NGBE_TS_ALARM_THRE, 0x344);/* magic num */
+	data->sensor.dalarm_thresh = 110;
+	wr32(hw, NGBE_TS_DALARM_THRE, 0x330);/* magic num */
+
+	return status;
+}
+
+void ngbe_disable_rx(struct ngbe_hw *hw)
+{
+	u32 pfdtxgswc;
+	u32 rxctrl;
+
+	DEBUGFUNC("\n");
+
+	rxctrl = rd32(hw, NGBE_RDB_PB_CTL);
+	if (rxctrl & NGBE_RDB_PB_CTL_PBEN) {
+		pfdtxgswc = rd32(hw, NGBE_PSR_CTL);
+		if (pfdtxgswc & NGBE_PSR_CTL_SW_EN) {
+			pfdtxgswc &= ~NGBE_PSR_CTL_SW_EN;
+			wr32(hw, NGBE_PSR_CTL, pfdtxgswc);
+			hw->mac.set_lben = true;
+		} else {
+			hw->mac.set_lben = false;
+		}
+		rxctrl &= ~NGBE_RDB_PB_CTL_PBEN;
+		wr32(hw, NGBE_RDB_PB_CTL, rxctrl);
+
+		/*OCP NCSI BMC need it*/
+		if (!(((hw->subsystem_device_id & OEM_MASK) == OCP_CARD) ||
+			((hw->subsystem_device_id & WOL_SUP_MASK) == WOL_SUP) ||
+			((hw->subsystem_device_id & NCSI_SUP_MASK) == NCSI_SUP))) {
+		/* disable mac receiver */
+			wr32m(hw, NGBE_MAC_RX_CFG,
+				NGBE_MAC_RX_CFG_RE, 0);
+		}
+	}
+}
+
+
+void ngbe_enable_rx(struct ngbe_hw *hw)
+{
+	u32 pfdtxgswc;
+
+	DEBUGFUNC("\n");
+
+	/* enable mac receiver */
+	wr32m(hw, NGBE_MAC_RX_CFG,
+		NGBE_MAC_RX_CFG_RE, NGBE_MAC_RX_CFG_RE);
+
+	wr32m(hw, NGBE_RSEC_CTL,
+		0x2, 0);
+
+	wr32m(hw, NGBE_RDB_PB_CTL,
+		NGBE_RDB_PB_CTL_PBEN, NGBE_RDB_PB_CTL_PBEN);
+
+	if (hw->mac.set_lben) {
+		pfdtxgswc = rd32(hw, NGBE_PSR_CTL);
+		pfdtxgswc |= NGBE_PSR_CTL_SW_EN;
+		wr32(hw, NGBE_PSR_CTL, pfdtxgswc);
+		hw->mac.set_lben = false;
+	}
+}
+
+/**
+ * ngbe_mng_present - returns true when manangbeent capability is present
+ * @hw: pointer to hardware structure
+ */
+bool ngbe_mng_present(struct ngbe_hw *hw)
+{
+	u32 fwsm;
+
+	fwsm = rd32(hw, NGBE_MIS_ST);
+	return fwsm & NGBE_MIS_ST_MNG_INIT_DN;
+}
+
+bool ngbe_check_mng_access(struct ngbe_hw *hw)
+{
+	if (!ngbe_mng_present(hw))
+		return false;
+	return true;
+}
+
+int ngbe_check_flash_load(struct ngbe_hw *hw, u32 check_bit)
+{
+	u32 i = 0;
+	u32 reg = 0;
+	int err = 0;
+	/* if there's flash existing */
+	if (!(rd32(hw, NGBE_SPI_STATUS) &
+		NGBE_SPI_STATUS_FLASH_BYPASS)) {
+		/* wait hw load flash done */
+		for (i = 0; i < NGBE_MAX_FLASH_LOAD_POLL_TIME; i++) {
+			reg = rd32(hw, NGBE_SPI_ILDR_STATUS);
+			if (!(reg & check_bit)) {
+				/* done */
+				break;
+			}
+			msleep(200);
+		}
+		if (i == NGBE_MAX_FLASH_LOAD_POLL_TIME) {
+			err = NGBE_ERR_FLASH_LOADING_FAILED;
+			ERROR_REPORT1(NGBE_ERROR_POLLING,
+				"HW Loading Flash failed: %d\n", err);
+		}
+	}
+	return err;
+}
+
+/* The ngbe_ptype_lookup is used to convert from the 8-bit ptype in the
+ * hardware to a bit-field that can be used by SW to more easily determine the
+ * packet type.
+ *
+ * Macros are used to shorten the table lines and make this table human
+ * readable.
+ *
+ * We store the PTYPE in the top byte of the bit field - this is just so that
+ * we can check that the table doesn't have a row missing, as the index into
+ * the table should be the PTYPE.
+ *
+ * Typical work flow:
+ *
+ * IF NOT ngbe_ptype_lookup[ptype].known
+ * THEN
+ *      Packet is unknown
+ * ELSE IF ngbe_ptype_lookup[ptype].mac == NGBE_DEC_PTYPE_MAC_IP
+ *      Use the rest of the fields to look at the tunnels, inner protocols, etc
+ * ELSE
+ *      Use the enum ngbe_l2_ptypes to decode the packet type
+ * ENDIF
+ */
+
+/* macro to make the table lines short */
+#define NGBE_PTT(ptype, mac, ip, etype, eip, proto, layer)\
+	{       ptype, \
+		1, \
+		/* mac     */ NGBE_DEC_PTYPE_MAC_##mac, \
+		/* ip      */ NGBE_DEC_PTYPE_IP_##ip, \
+		/* etype   */ NGBE_DEC_PTYPE_ETYPE_##etype, \
+		/* eip     */ NGBE_DEC_PTYPE_IP_##eip, \
+		/* proto   */ NGBE_DEC_PTYPE_PROT_##proto, \
+		/* layer   */ NGBE_DEC_PTYPE_LAYER_##layer }
+
+#define NGBE_UKN(ptype) \
+		{ ptype, 0, 0, 0, 0, 0, 0, 0 }
+
+/* Lookup table mapping the HW PTYPE to the bit field for decoding */
+/* for ((pt=0;pt<256;pt++)); do printf "macro(0x%02X),\n" $pt; done */
+ngbe_dptype ngbe_ptype_lookup[256] = {
+	NGBE_UKN(0x00),
+	NGBE_UKN(0x01),
+	NGBE_UKN(0x02),
+	NGBE_UKN(0x03),
+	NGBE_UKN(0x04),
+	NGBE_UKN(0x05),
+	NGBE_UKN(0x06),
+	NGBE_UKN(0x07),
+	NGBE_UKN(0x08),
+	NGBE_UKN(0x09),
+	NGBE_UKN(0x0A),
+	NGBE_UKN(0x0B),
+	NGBE_UKN(0x0C),
+	NGBE_UKN(0x0D),
+	NGBE_UKN(0x0E),
+	NGBE_UKN(0x0F),
+
+	/* L2: mac */
+	NGBE_UKN(0x10),
+	NGBE_PTT(0x11, L2, NONE, NONE, NONE, NONE, PAY2),
+	NGBE_PTT(0x12, L2, NONE, NONE, NONE, TS,   PAY2),
+	NGBE_PTT(0x13, L2, NONE, NONE, NONE, NONE, PAY2),
+	NGBE_PTT(0x14, L2, NONE, NONE, NONE, NONE, PAY2),
+	NGBE_PTT(0x15, L2, NONE, NONE, NONE, NONE, NONE),
+	NGBE_PTT(0x16, L2, NONE, NONE, NONE, NONE, PAY2),
+	NGBE_PTT(0x17, L2, NONE, NONE, NONE, NONE, NONE),
+
+	/* L2: ethertype filter */
+	NGBE_PTT(0x18, L2, NONE, NONE, NONE, NONE, NONE),
+	NGBE_PTT(0x19, L2, NONE, NONE, NONE, NONE, NONE),
+	NGBE_PTT(0x1A, L2, NONE, NONE, NONE, NONE, NONE),
+	NGBE_PTT(0x1B, L2, NONE, NONE, NONE, NONE, NONE),
+	NGBE_PTT(0x1C, L2, NONE, NONE, NONE, NONE, NONE),
+	NGBE_PTT(0x1D, L2, NONE, NONE, NONE, NONE, NONE),
+	NGBE_PTT(0x1E, L2, NONE, NONE, NONE, NONE, NONE),
+	NGBE_PTT(0x1F, L2, NONE, NONE, NONE, NONE, NONE),
+
+	/* L3: ip non-tunnel */
+	NGBE_UKN(0x20),
+	NGBE_PTT(0x21, IP, FGV4, NONE, NONE, NONE, PAY3),
+	NGBE_PTT(0x22, IP, IPV4, NONE, NONE, NONE, PAY3),
+	NGBE_PTT(0x23, IP, IPV4, NONE, NONE, UDP,  PAY4),
+	NGBE_PTT(0x24, IP, IPV4, NONE, NONE, TCP,  PAY4),
+	NGBE_PTT(0x25, IP, IPV4, NONE, NONE, SCTP, PAY4),
+	NGBE_UKN(0x26),
+	NGBE_UKN(0x27),
+	NGBE_UKN(0x28),
+	NGBE_PTT(0x29, IP, FGV6, NONE, NONE, NONE, PAY3),
+	NGBE_PTT(0x2A, IP, IPV6, NONE, NONE, NONE, PAY3),
+	NGBE_PTT(0x2B, IP, IPV6, NONE, NONE, UDP,  PAY3),
+	NGBE_PTT(0x2C, IP, IPV6, NONE, NONE, TCP,  PAY4),
+	NGBE_PTT(0x2D, IP, IPV6, NONE, NONE, SCTP, PAY4),
+	NGBE_UKN(0x2E),
+	NGBE_UKN(0x2F),
+
+	/* L2: fcoe */
+	NGBE_PTT(0x30, FCOE, NONE, NONE, NONE, NONE, PAY3),
+	NGBE_PTT(0x31, FCOE, NONE, NONE, NONE, NONE, PAY3),
+	NGBE_PTT(0x32, FCOE, NONE, NONE, NONE, NONE, PAY3),
+	NGBE_PTT(0x33, FCOE, NONE, NONE, NONE, NONE, PAY3),
+	NGBE_PTT(0x34, FCOE, NONE, NONE, NONE, NONE, PAY3),
+	NGBE_UKN(0x35),
+	NGBE_UKN(0x36),
+	NGBE_UKN(0x37),
+	NGBE_PTT(0x38, FCOE, NONE, NONE, NONE, NONE, PAY3),
+	NGBE_PTT(0x39, FCOE, NONE, NONE, NONE, NONE, PAY3),
+	NGBE_PTT(0x3A, FCOE, NONE, NONE, NONE, NONE, PAY3),
+	NGBE_PTT(0x3B, FCOE, NONE, NONE, NONE, NONE, PAY3),
+	NGBE_PTT(0x3C, FCOE, NONE, NONE, NONE, NONE, PAY3),
+	NGBE_UKN(0x3D),
+	NGBE_UKN(0x3E),
+	NGBE_UKN(0x3F),
+
+	NGBE_UKN(0x40),
+	NGBE_UKN(0x41),
+	NGBE_UKN(0x42),
+	NGBE_UKN(0x43),
+	NGBE_UKN(0x44),
+	NGBE_UKN(0x45),
+	NGBE_UKN(0x46),
+	NGBE_UKN(0x47),
+	NGBE_UKN(0x48),
+	NGBE_UKN(0x49),
+	NGBE_UKN(0x4A),
+	NGBE_UKN(0x4B),
+	NGBE_UKN(0x4C),
+	NGBE_UKN(0x4D),
+	NGBE_UKN(0x4E),
+	NGBE_UKN(0x4F),
+	NGBE_UKN(0x50),
+	NGBE_UKN(0x51),
+	NGBE_UKN(0x52),
+	NGBE_UKN(0x53),
+	NGBE_UKN(0x54),
+	NGBE_UKN(0x55),
+	NGBE_UKN(0x56),
+	NGBE_UKN(0x57),
+	NGBE_UKN(0x58),
+	NGBE_UKN(0x59),
+	NGBE_UKN(0x5A),
+	NGBE_UKN(0x5B),
+	NGBE_UKN(0x5C),
+	NGBE_UKN(0x5D),
+	NGBE_UKN(0x5E),
+	NGBE_UKN(0x5F),
+	NGBE_UKN(0x60),
+	NGBE_UKN(0x61),
+	NGBE_UKN(0x62),
+	NGBE_UKN(0x63),
+	NGBE_UKN(0x64),
+	NGBE_UKN(0x65),
+	NGBE_UKN(0x66),
+	NGBE_UKN(0x67),
+	NGBE_UKN(0x68),
+	NGBE_UKN(0x69),
+	NGBE_UKN(0x6A),
+	NGBE_UKN(0x6B),
+	NGBE_UKN(0x6C),
+	NGBE_UKN(0x6D),
+	NGBE_UKN(0x6E),
+	NGBE_UKN(0x6F),
+	NGBE_UKN(0x70),
+	NGBE_UKN(0x71),
+	NGBE_UKN(0x72),
+	NGBE_UKN(0x73),
+	NGBE_UKN(0x74),
+	NGBE_UKN(0x75),
+	NGBE_UKN(0x76),
+	NGBE_UKN(0x77),
+	NGBE_UKN(0x78),
+	NGBE_UKN(0x79),
+	NGBE_UKN(0x7A),
+	NGBE_UKN(0x7B),
+	NGBE_UKN(0x7C),
+	NGBE_UKN(0x7D),
+	NGBE_UKN(0x7E),
+	NGBE_UKN(0x7F),
+
+	/* IPv4 --> IPv4/IPv6 */
+	NGBE_UKN(0x80),
+	NGBE_PTT(0x81, IP, IPV4, IPIP, FGV4, NONE, PAY3),
+	NGBE_PTT(0x82, IP, IPV4, IPIP, IPV4, NONE, PAY3),
+	NGBE_PTT(0x83, IP, IPV4, IPIP, IPV4, UDP,  PAY4),
+	NGBE_PTT(0x84, IP, IPV4, IPIP, IPV4, TCP,  PAY4),
+	NGBE_PTT(0x85, IP, IPV4, IPIP, IPV4, SCTP, PAY4),
+	NGBE_UKN(0x86),
+	NGBE_UKN(0x87),
+	NGBE_UKN(0x88),
+	NGBE_PTT(0x89, IP, IPV4, IPIP, FGV6, NONE, PAY3),
+	NGBE_PTT(0x8A, IP, IPV4, IPIP, IPV6, NONE, PAY3),
+	NGBE_PTT(0x8B, IP, IPV4, IPIP, IPV6, UDP,  PAY4),
+	NGBE_PTT(0x8C, IP, IPV4, IPIP, IPV6, TCP,  PAY4),
+	NGBE_PTT(0x8D, IP, IPV4, IPIP, IPV6, SCTP, PAY4),
+	NGBE_UKN(0x8E),
+	NGBE_UKN(0x8F),
+
+	/* IPv4 --> GRE/NAT --> NONE/IPv4/IPv6 */
+	NGBE_PTT(0x90, IP, IPV4, IG, NONE, NONE, PAY3),
+	NGBE_PTT(0x91, IP, IPV4, IG, FGV4, NONE, PAY3),
+	NGBE_PTT(0x92, IP, IPV4, IG, IPV4, NONE, PAY3),
+	NGBE_PTT(0x93, IP, IPV4, IG, IPV4, UDP,  PAY4),
+	NGBE_PTT(0x94, IP, IPV4, IG, IPV4, TCP,  PAY4),
+	NGBE_PTT(0x95, IP, IPV4, IG, IPV4, SCTP, PAY4),
+	NGBE_UKN(0x96),
+	NGBE_UKN(0x97),
+	NGBE_UKN(0x98),
+	NGBE_PTT(0x99, IP, IPV4, IG, FGV6, NONE, PAY3),
+	NGBE_PTT(0x9A, IP, IPV4, IG, IPV6, NONE, PAY3),
+	NGBE_PTT(0x9B, IP, IPV4, IG, IPV6, UDP,  PAY4),
+	NGBE_PTT(0x9C, IP, IPV4, IG, IPV6, TCP,  PAY4),
+	NGBE_PTT(0x9D, IP, IPV4, IG, IPV6, SCTP, PAY4),
+	NGBE_UKN(0x9E),
+	NGBE_UKN(0x9F),
+
+	/* IPv4 --> GRE/NAT --> MAC --> NONE/IPv4/IPv6 */
+	NGBE_PTT(0xA0, IP, IPV4, IGM, NONE, NONE, PAY3),
+	NGBE_PTT(0xA1, IP, IPV4, IGM, FGV4, NONE, PAY3),
+	NGBE_PTT(0xA2, IP, IPV4, IGM, IPV4, NONE, PAY3),
+	NGBE_PTT(0xA3, IP, IPV4, IGM, IPV4, UDP,  PAY4),
+	NGBE_PTT(0xA4, IP, IPV4, IGM, IPV4, TCP,  PAY4),
+	NGBE_PTT(0xA5, IP, IPV4, IGM, IPV4, SCTP, PAY4),
+	NGBE_UKN(0xA6),
+	NGBE_UKN(0xA7),
+	NGBE_UKN(0xA8),
+	NGBE_PTT(0xA9, IP, IPV4, IGM, FGV6, NONE, PAY3),
+	NGBE_PTT(0xAA, IP, IPV4, IGM, IPV6, NONE, PAY3),
+	NGBE_PTT(0xAB, IP, IPV4, IGM, IPV6, UDP,  PAY4),
+	NGBE_PTT(0xAC, IP, IPV4, IGM, IPV6, TCP,  PAY4),
+	NGBE_PTT(0xAD, IP, IPV4, IGM, IPV6, SCTP, PAY4),
+	NGBE_UKN(0xAE),
+	NGBE_UKN(0xAF),
+
+	/* IPv4 --> GRE/NAT --> MAC+VLAN --> NONE/IPv4/IPv6 */
+	NGBE_PTT(0xB0, IP, IPV4, IGMV, NONE, NONE, PAY3),
+	NGBE_PTT(0xB1, IP, IPV4, IGMV, FGV4, NONE, PAY3),
+	NGBE_PTT(0xB2, IP, IPV4, IGMV, IPV4, NONE, PAY3),
+	NGBE_PTT(0xB3, IP, IPV4, IGMV, IPV4, UDP,  PAY4),
+	NGBE_PTT(0xB4, IP, IPV4, IGMV, IPV4, TCP,  PAY4),
+	NGBE_PTT(0xB5, IP, IPV4, IGMV, IPV4, SCTP, PAY4),
+	NGBE_UKN(0xB6),
+	NGBE_UKN(0xB7),
+	NGBE_UKN(0xB8),
+	NGBE_PTT(0xB9, IP, IPV4, IGMV, FGV6, NONE, PAY3),
+	NGBE_PTT(0xBA, IP, IPV4, IGMV, IPV6, NONE, PAY3),
+	NGBE_PTT(0xBB, IP, IPV4, IGMV, IPV6, UDP,  PAY4),
+	NGBE_PTT(0xBC, IP, IPV4, IGMV, IPV6, TCP,  PAY4),
+	NGBE_PTT(0xBD, IP, IPV4, IGMV, IPV6, SCTP, PAY4),
+	NGBE_UKN(0xBE),
+	NGBE_UKN(0xBF),
+
+	/* IPv6 --> IPv4/IPv6 */
+	NGBE_UKN(0xC0),
+	NGBE_PTT(0xC1, IP, IPV6, IPIP, FGV4, NONE, PAY3),
+	NGBE_PTT(0xC2, IP, IPV6, IPIP, IPV4, NONE, PAY3),
+	NGBE_PTT(0xC3, IP, IPV6, IPIP, IPV4, UDP,  PAY4),
+	NGBE_PTT(0xC4, IP, IPV6, IPIP, IPV4, TCP,  PAY4),
+	NGBE_PTT(0xC5, IP, IPV6, IPIP, IPV4, SCTP, PAY4),
+	NGBE_UKN(0xC6),
+	NGBE_UKN(0xC7),
+	NGBE_UKN(0xC8),
+	NGBE_PTT(0xC9, IP, IPV6, IPIP, FGV6, NONE, PAY3),
+	NGBE_PTT(0xCA, IP, IPV6, IPIP, IPV6, NONE, PAY3),
+	NGBE_PTT(0xCB, IP, IPV6, IPIP, IPV6, UDP,  PAY4),
+	NGBE_PTT(0xCC, IP, IPV6, IPIP, IPV6, TCP,  PAY4),
+	NGBE_PTT(0xCD, IP, IPV6, IPIP, IPV6, SCTP, PAY4),
+	NGBE_UKN(0xCE),
+	NGBE_UKN(0xCF),
+
+	/* IPv6 --> GRE/NAT -> NONE/IPv4/IPv6 */
+	NGBE_PTT(0xD0, IP, IPV6, IG,   NONE, NONE, PAY3),
+	NGBE_PTT(0xD1, IP, IPV6, IG,   FGV4, NONE, PAY3),
+	NGBE_PTT(0xD2, IP, IPV6, IG,   IPV4, NONE, PAY3),
+	NGBE_PTT(0xD3, IP, IPV6, IG,   IPV4, UDP,  PAY4),
+	NGBE_PTT(0xD4, IP, IPV6, IG,   IPV4, TCP,  PAY4),
+	NGBE_PTT(0xD5, IP, IPV6, IG,   IPV4, SCTP, PAY4),
+	NGBE_UKN(0xD6),
+	NGBE_UKN(0xD7),
+	NGBE_UKN(0xD8),
+	NGBE_PTT(0xD9, IP, IPV6, IG,   FGV6, NONE, PAY3),
+	NGBE_PTT(0xDA, IP, IPV6, IG,   IPV6, NONE, PAY3),
+	NGBE_PTT(0xDB, IP, IPV6, IG,   IPV6, UDP,  PAY4),
+	NGBE_PTT(0xDC, IP, IPV6, IG,   IPV6, TCP,  PAY4),
+	NGBE_PTT(0xDD, IP, IPV6, IG,   IPV6, SCTP, PAY4),
+	NGBE_UKN(0xDE),
+	NGBE_UKN(0xDF),
+
+	/* IPv6 --> GRE/NAT -> MAC -> NONE/IPv4/IPv6 */
+	NGBE_PTT(0xE0, IP, IPV6, IGM,  NONE, NONE, PAY3),
+	NGBE_PTT(0xE1, IP, IPV6, IGM,  FGV4, NONE, PAY3),
+	NGBE_PTT(0xE2, IP, IPV6, IGM,  IPV4, NONE, PAY3),
+	NGBE_PTT(0xE3, IP, IPV6, IGM,  IPV4, UDP,  PAY4),
+	NGBE_PTT(0xE4, IP, IPV6, IGM,  IPV4, TCP,  PAY4),
+	NGBE_PTT(0xE5, IP, IPV6, IGM,  IPV4, SCTP, PAY4),
+	NGBE_UKN(0xE6),
+	NGBE_UKN(0xE7),
+	NGBE_UKN(0xE8),
+	NGBE_PTT(0xE9, IP, IPV6, IGM,  FGV6, NONE, PAY3),
+	NGBE_PTT(0xEA, IP, IPV6, IGM,  IPV6, NONE, PAY3),
+	NGBE_PTT(0xEB, IP, IPV6, IGM,  IPV6, UDP,  PAY4),
+	NGBE_PTT(0xEC, IP, IPV6, IGM,  IPV6, TCP,  PAY4),
+	NGBE_PTT(0xED, IP, IPV6, IGM,  IPV6, SCTP, PAY4),
+	NGBE_UKN(0xEE),
+	NGBE_UKN(0xEF),
+
+	/* IPv6 --> GRE/NAT -> MAC--> NONE/IPv */
+	NGBE_PTT(0xF0, IP, IPV6, IGMV, NONE, NONE, PAY3),
+	NGBE_PTT(0xF1, IP, IPV6, IGMV, FGV4, NONE, PAY3),
+	NGBE_PTT(0xF2, IP, IPV6, IGMV, IPV4, NONE, PAY3),
+	NGBE_PTT(0xF3, IP, IPV6, IGMV, IPV4, UDP,  PAY4),
+	NGBE_PTT(0xF4, IP, IPV6, IGMV, IPV4, TCP,  PAY4),
+	NGBE_PTT(0xF5, IP, IPV6, IGMV, IPV4, SCTP, PAY4),
+	NGBE_UKN(0xF6),
+	NGBE_UKN(0xF7),
+	NGBE_UKN(0xF8),
+	NGBE_PTT(0xF9, IP, IPV6, IGMV, FGV6, NONE, PAY3),
+	NGBE_PTT(0xFA, IP, IPV6, IGMV, IPV6, NONE, PAY3),
+	NGBE_PTT(0xFB, IP, IPV6, IGMV, IPV6, UDP,  PAY4),
+	NGBE_PTT(0xFC, IP, IPV6, IGMV, IPV6, TCP,  PAY4),
+	NGBE_PTT(0xFD, IP, IPV6, IGMV, IPV6, SCTP, PAY4),
+	NGBE_UKN(0xFE),
+	NGBE_UKN(0xFF),
+};
+
+
+void ngbe_init_mac_link_ops(struct ngbe_hw *hw)
+{
+	struct ngbe_mac_info *mac = &hw->mac;
+
+	DEBUGFUNC("\n");
+
+	mac->ops.setup_link = ngbe_setup_mac_link;
+}
+
+/**
+ *  ngbe_init_ops - Inits func ptrs and MAC type
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize the function pointers and assign the MAC type for emerald.
+ *  Does not touch the hardware.
+ **/
+
+s32 ngbe_init_ops(struct ngbe_hw *hw)
+{
+	struct ngbe_mac_info *mac = &hw->mac;
+	struct ngbe_phy_info *phy = &hw->phy;
+
+	DEBUGFUNC("ngbe_init_ops");
+
+	ngbe_init_phy_ops_common(hw);
+	ngbe_init_ops_common(hw);
+
+	if (hw->phy.type == ngbe_phy_m88e1512 ||
+		hw->phy.type == ngbe_phy_m88e1512_sfi) {
+		phy->ops.read_reg_mdi = ngbe_phy_read_reg_mdi;
+		phy->ops.write_reg_mdi = ngbe_phy_write_reg_mdi;
+		phy->ops.setup_link = ngbe_phy_setup_link_m88e1512;
+		phy->ops.reset = ngbe_phy_reset_m88e1512;
+		phy->ops.check_event = ngbe_phy_check_event_m88e1512;
+		phy->ops.get_adv_pause = ngbe_phy_get_advertised_pause_m88e1512;
+		phy->ops.get_lp_adv_pause = ngbe_phy_get_lp_advertised_pause_m88e1512;
+		phy->ops.set_adv_pause = ngbe_phy_set_pause_advertisement_m88e1512;
+
+		mac->ops.check_link = ngbe_check_mac_link_mdi;
+	} else if (hw->phy.type == ngbe_phy_yt8521s_sfi) {
+		phy->ops.read_reg_mdi = ngbe_phy_read_reg_mdi;
+		phy->ops.write_reg_mdi = ngbe_phy_write_reg_mdi;
+		phy->ops.setup_link = ngbe_phy_setup_link_yt8521s;
+		phy->ops.reset = ngbe_phy_reset_yt8521s;
+		phy->ops.check_event = ngbe_phy_check_event_yt8521s;
+		phy->ops.get_adv_pause = ngbe_phy_get_advertised_pause_yt8521s;
+		phy->ops.get_lp_adv_pause = ngbe_phy_get_lp_advertised_pause_yt8521s;
+		phy->ops.set_adv_pause = ngbe_phy_set_pause_advertisement_yt8521s;
+
+		mac->ops.check_link = ngbe_check_mac_link_yt8521s;
+	}
+
+	return NGBE_OK;
+}
+
+/**
+ *  ngbe_get_link_capabilities - Determines link capabilities
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @autoneg: true when autoneg or autotry is enabled
+ *
+ *  Determines the link capabilities by reading the AUTOC register.
+ **/
+s32 ngbe_get_link_capabilities(struct ngbe_hw *hw,
+				      u32 *speed,
+				      bool *autoneg)
+{
+	s32 status = 0;
+
+	DEBUGFUNC("\n");
+
+	if (hw->device_id == NGBE_DEV_ID_EM_TEST ||
+		hw->device_id == NGBE_DEV_ID_EM_WX1860A2 ||
+		hw->device_id == NGBE_DEV_ID_EM_WX1860A2S ||
+		hw->device_id == NGBE_DEV_ID_EM_WX1860A4 ||
+		hw->device_id == NGBE_DEV_ID_EM_WX1860A4S ||
+		hw->device_id == NGBE_DEV_ID_EM_WX1860AL2 ||
+		hw->device_id == NGBE_DEV_ID_EM_WX1860AL2S ||
+		hw->device_id == NGBE_DEV_ID_EM_WX1860AL4 ||
+		hw->device_id == NGBE_DEV_ID_EM_WX1860AL4S ||
+		hw->device_id == NGBE_DEV_ID_EM_WX1860AL_W ||
+		hw->device_id == NGBE_DEV_ID_EM_WX1860A1 ||
+		hw->device_id == NGBE_DEV_ID_EM_WX1860AL1 ||
+
+	hw->device_id == 0x10c ||
+		hw->device_id == NGBE_DEV_ID_EM_WX1860NCSI) {
+		*speed = NGBE_LINK_SPEED_1GB_FULL |
+			NGBE_LINK_SPEED_100_FULL |
+			NGBE_LINK_SPEED_10_FULL;
+		*autoneg = false;
+		hw->phy.link_mode = NGBE_PHYSICAL_LAYER_1000BASE_T |
+				NGBE_PHYSICAL_LAYER_100BASE_TX;
+	}
+
+	return status;
+}
+
+/**
+ *  ngbe_get_copper_link_capabilities - Determines link capabilities
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @autoneg: boolean auto-negotiation value
+ *
+ *  Determines the supported link capabilities by reading the PHY auto
+ *  negotiation register.
+**/
+s32 ngbe_get_copper_link_capabilities(struct ngbe_hw *hw,
+						 u32 *speed,
+						 bool *autoneg)
+{
+	s32 status = 0;
+
+	DEBUGFUNC("\n");
+
+	*speed = 0;
+
+	if (hw->mac.autoneg)
+		*autoneg = true;
+	else
+		*autoneg = false;
+
+	if (status == 0) {
+		*speed = NGBE_LINK_SPEED_10_FULL |
+				 NGBE_LINK_SPEED_100_FULL |
+				 NGBE_LINK_SPEED_1GB_FULL;
+	}
+
+	return status;
+}
+
+/**
+ *  ngbe_get_media_type - Get media type
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the media type (fiber, copper, backplane)
+ **/
+enum ngbe_media_type ngbe_get_media_type(struct ngbe_hw *hw)
+{
+	enum ngbe_media_type media_type;
+
+	DEBUGFUNC("\n");
+
+	ERROR_REPORT1(NGBE_ERROR_ARGUMENT,
+		"ngbe_get_media_type: hw->device_id = %u/n", hw->device_id);
+
+	media_type = ngbe_media_type_copper;
+
+	return media_type;
+}
+
+/**
+ *  ngbe_stop_mac_link_on_d3 - Disables link on D3
+ *  @hw: pointer to hardware structure
+ *
+ *  Disables link during D3 power down sequence.
+ *
+ **/
+void ngbe_stop_mac_link_on_d3(struct ngbe_hw *hw)
+{
+	UNREFERENCED_PARAMETER(hw);
+	return;
+}
+
+/**
+ *  ngbe_setup_mac_link - Set MAC link speed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Set the link speed in the AUTOC register and restarts link.
+ **/
+s32 ngbe_setup_mac_link(struct ngbe_hw *hw,
+			       u32 speed,
+			       bool autoneg_wait_to_complete)
+{
+	bool autoneg = false;
+	s32 status = 0;
+	u32 link_capabilities = NGBE_LINK_SPEED_UNKNOWN;
+	u32 link_speed = NGBE_LINK_SPEED_UNKNOWN;
+	u32 lan_speed = 0;
+	bool link_up = false;
+
+	UNREFERENCED_PARAMETER(autoneg_wait_to_complete);
+	DEBUGFUNC("\n");
+
+	if (!(((hw->subsystem_device_id & OEM_MASK) == OCP_CARD) ||
+		((hw->subsystem_device_id & WOL_SUP_MASK) == WOL_SUP) ||
+		((hw->subsystem_device_id & NCSI_SUP_MASK) == NCSI_SUP))) {
+		/* Check to see if speed passed in is supported. */
+		status = TCALL(hw, mac.ops.get_link_capabilities,
+				       &link_capabilities, &autoneg);
+		if (status)
+			goto out;
+
+		speed &= link_capabilities;
+
+		if (speed == NGBE_LINK_SPEED_UNKNOWN) {
+			status = NGBE_ERR_LINK_SETUP;
+			goto out;
+		}
+	}
+
+	status = TCALL(hw, mac.ops.check_link,
+				&link_speed, &link_up, false);
+	if (status != 0)
+		goto out;
+	if ((link_speed == speed) && link_up) {
+		switch (link_speed) {
+		case NGBE_LINK_SPEED_100_FULL:
+			lan_speed = 1;
+			break;
+		case NGBE_LINK_SPEED_1GB_FULL:
+			lan_speed = 2;
+			break;
+		case NGBE_LINK_SPEED_10_FULL:
+			lan_speed = 0;
+			break;
+		default:
+			break;
+		}
+		wr32m(hw, NGBE_CFG_LAN_SPEED,
+			0x3, lan_speed);
+	}
+
+out:
+	return status;
+}
+
+
+/**
+ *  ngbe_setup_copper_link - Set the PHY autoneg advertised field
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true if waiting is needed to complete
+ *
+ *  Restarts link on PHY and MAC based on settings passed in.
+ **/
+STATIC s32 ngbe_setup_copper_link(struct ngbe_hw *hw,
+					 u32 speed,
+					 bool need_restart_AN)
+{
+	s32 status;
+	struct ngbe_adapter *adapter = hw->back;
+
+	DEBUGFUNC("\n");
+
+	/* Setup the PHY according to input speed */
+	status = TCALL(hw, phy.ops.setup_link, speed,
+						need_restart_AN);
+
+	adapter->flags |= NGBE_FLAG_NEED_ANC_CHECK;
+
+	return status;
+}
+
+int ngbe_reset_misc(struct ngbe_hw *hw)
+{
+	int i;
+
+	/* receive packets that size > 2048 */
+	wr32m(hw, NGBE_MAC_RX_CFG,
+		NGBE_MAC_RX_CFG_JE, NGBE_MAC_RX_CFG_JE);
+
+	/* clear counters on read */
+	wr32m(hw, NGBE_MMC_CONTROL,
+		NGBE_MMC_CONTROL_RSTONRD, NGBE_MMC_CONTROL_RSTONRD);
+
+	wr32m(hw, NGBE_MAC_RX_FLOW_CTRL,
+		NGBE_MAC_RX_FLOW_CTRL_RFE, NGBE_MAC_RX_FLOW_CTRL_RFE);
+
+	wr32(hw, NGBE_MAC_PKT_FLT,
+		NGBE_MAC_PKT_FLT_PR);
+
+	wr32m(hw, NGBE_MIS_RST_ST,
+		NGBE_MIS_RST_ST_RST_INIT, 0x1E00);
+
+	/* errata 4: initialize mng flex tbl and wakeup flex tbl*/
+	wr32(hw, NGBE_PSR_MNG_FLEX_SEL, 0);
+	for (i = 0; i < 16; i++) {
+		wr32(hw, NGBE_PSR_MNG_FLEX_DW_L(i), 0);
+		wr32(hw, NGBE_PSR_MNG_FLEX_DW_H(i), 0);
+		wr32(hw, NGBE_PSR_MNG_FLEX_MSK(i), 0);
+	}
+	wr32(hw, NGBE_PSR_LAN_FLEX_SEL, 0);
+	for (i = 0; i < 16; i++) {
+		wr32(hw, NGBE_PSR_LAN_FLEX_DW_L(i), 0);
+		wr32(hw, NGBE_PSR_LAN_FLEX_DW_H(i), 0);
+		wr32(hw, NGBE_PSR_LAN_FLEX_MSK(i), 0);
+	}
+
+	/* set pause frame dst mac addr */
+	wr32(hw, NGBE_RDB_PFCMACDAL, 0xC2000001);
+	wr32(hw, NGBE_RDB_PFCMACDAH, 0x0180);
+
+	wr32(hw, NGBE_MDIO_CLAUSE_SELECT, 0xF);
+
+	if (((hw->subsystem_device_id & OEM_MASK) == LY_M88E1512_SFP) ||
+		 (hw->subsystem_device_id & OEM_MASK) == LY_YT8521S_SFP) {
+		/* gpio0 is used to power on/off control*/
+		wr32(hw, NGBE_GPIO_DDR, 0x1);
+		wr32(hw, NGBE_GPIO_DR, NGBE_GPIO_DR_0);
+	}
+
+	ngbe_init_thermal_sensor_thresh(hw);
+
+	return 0;
+}
+
+/**
+ *  ngbe_reset_hw - Perform hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by resetting the transmit and receive units, masks
+ *  and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ *  reset.
+ **/
+s32 ngbe_reset_hw(struct ngbe_hw *hw)
+{
+	s32 status;
+	u32 reset = 0;
+	u32 i;
+	struct ngbe_mac_info *mac = &hw->mac;
+
+	u32 sr_pcs_ctl = 0, sr_pma_mmd_ctl1 = 0, sr_an_mmd_ctl = 0;
+	u32 sr_an_mmd_adv_reg2 = 0;
+	u32 vr_xs_or_pcs_mmd_digi_ctl1 = 0, curr_vr_xs_or_pcs_mmd_digi_ctl1 = 0;
+	u32 curr_sr_pcs_ctl = 0, curr_sr_pma_mmd_ctl1 = 0;
+	u32 curr_sr_an_mmd_ctl = 0, curr_sr_an_mmd_adv_reg2 = 0;
+
+	u32 reset_status = 0;
+	u32 rst_delay = 0;
+
+	struct ngbe_adapter *adapter = NULL;
+
+	DEBUGFUNC("\n");
+
+	/* Call adapter stop to disable tx/rx and clear interrupts */
+	status = TCALL(hw, mac.ops.stop_adapter);
+	if (status != 0)
+		goto reset_hw_out;
+
+	/* Identify PHY and related function pointers */
+	status = TCALL(hw, phy.ops.init);
+
+	if (status)
+		goto reset_hw_out;
+
+	if (ngbe_get_media_type(hw) == ngbe_media_type_copper) {
+		mac->ops.setup_link = ngbe_setup_copper_link;
+		mac->ops.get_link_capabilities =
+				 ngbe_get_copper_link_capabilities;
+	}
+
+	/*
+	 * Issue global reset to the MAC.  Needs to be SW reset if link is up.
+	 * If link reset is used when link is up, it might reset the PHY when
+	 * mng is using it.  If link is down or the flag to force full link
+	 * reset is set, then perform link reset.
+	 */
+	if (hw->force_full_reset) {
+		rst_delay = (rd32(hw, NGBE_MIS_RST_ST) &
+			NGBE_MIS_RST_ST_RST_INIT) >>
+			NGBE_MIS_RST_ST_RST_INI_SHIFT;
+		if (hw->reset_type == NGBE_SW_RESET) {
+			for (i = 0; i < rst_delay + 20; i++) {
+				reset_status =
+					rd32(hw, NGBE_MIS_RST_ST);
+				if (!(reset_status &
+				    NGBE_MIS_RST_ST_DEV_RST_ST_MASK))
+					break;
+				msleep(100);
+			}
+
+			if (reset_status & NGBE_MIS_RST_ST_DEV_RST_ST_MASK) {
+				status = NGBE_ERR_RESET_FAILED;
+				DEBUGOUT("software reset polling failed to "
+					"complete.\n");
+				goto reset_hw_out;
+			}
+			status = ngbe_check_flash_load(hw,
+						NGBE_SPI_ILDR_STATUS_SW_RESET);
+			if (status != 0)
+				goto reset_hw_out;
+
+		} else if (hw->reset_type == NGBE_GLOBAL_RESET) {
+			adapter = (struct ngbe_adapter *)hw->back;
+			msleep(100 * rst_delay + 2000);
+			pci_restore_state(adapter->pdev);
+			pci_save_state(adapter->pdev);
+			pci_wake_from_d3(adapter->pdev, false);
+		}
+	} else {
+
+		if (hw->bus.lan_id == 0) {
+			reset = NGBE_MIS_RST_LAN0_RST;
+		} else if (hw->bus.lan_id == 1) {
+			reset = NGBE_MIS_RST_LAN1_RST;
+		} else if (hw->bus.lan_id == 2) {
+			reset = NGBE_MIS_RST_LAN2_RST;
+		} else if (hw->bus.lan_id == 3) {
+			reset = NGBE_MIS_RST_LAN3_RST;
+		}
+
+		wr32(hw, NGBE_MIS_RST,
+			reset | rd32(hw, NGBE_MIS_RST));
+		NGBE_WRITE_FLUSH(hw);
+
+		msleep(15);
+	}
+
+	status = ngbe_reset_misc(hw);
+	if (status != 0)
+		goto reset_hw_out;
+
+	if (hw->mac.orig_link_settings_stored == false) {
+		hw->mac.orig_sr_pcs_ctl2 = sr_pcs_ctl;
+		hw->mac.orig_sr_pma_mmd_ctl1 = sr_pma_mmd_ctl1;
+		hw->mac.orig_sr_an_mmd_ctl = sr_an_mmd_ctl;
+		hw->mac.orig_sr_an_mmd_adv_reg2 = sr_an_mmd_adv_reg2;
+		hw->mac.orig_vr_xs_or_pcs_mmd_digi_ctl1 =
+						vr_xs_or_pcs_mmd_digi_ctl1;
+		hw->mac.orig_link_settings_stored = true;
+	} else {
+		/* If MNG FW is running on a multi-speed device that
+		 * doesn't autoneg with out driver support we need to
+		 * leave LMS in the state it was before we MAC reset.
+		 * Likewise if we support WoL we don't want change the
+		 * LMS state.
+		 */
+		hw->mac.orig_sr_pcs_ctl2 = curr_sr_pcs_ctl;
+		hw->mac.orig_sr_pma_mmd_ctl1 = curr_sr_pma_mmd_ctl1;
+		hw->mac.orig_sr_an_mmd_ctl = curr_sr_an_mmd_ctl;
+		hw->mac.orig_sr_an_mmd_adv_reg2 =
+					curr_sr_an_mmd_adv_reg2;
+		hw->mac.orig_vr_xs_or_pcs_mmd_digi_ctl1 =
+					curr_vr_xs_or_pcs_mmd_digi_ctl1;
+	}
+
+	/* Store the permanent mac address */
+	TCALL(hw, mac.ops.get_mac_addr, hw->mac.perm_addr);
+
+	/*
+	 * Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table.  Also reset num_rar_entries to 128,
+	 * since we modify this value when programming the SAN MAC address.
+	 */
+	hw->mac.num_rar_entries = NGBE_SP_RAR_ENTRIES;
+	TCALL(hw, mac.ops.init_rx_addrs);
+
+	pci_set_master(((struct ngbe_adapter *)hw->back)->pdev);
+
+reset_hw_out:
+	return status;
+}
+
+/*
+ * These defines allow us to quickly generate all of the necessary instructions
+ * in the function below by simply calling out NGBE_COMPUTE_SIG_HASH_ITERATION
+ * for values 0 through 15
+ */
+#define NGBE_ATR_COMMON_HASH_KEY \
+		(NGBE_ATR_BUCKET_HASH_KEY & NGBE_ATR_SIGNATURE_HASH_KEY)
+#define NGBE_COMPUTE_SIG_HASH_ITERATION(_n) \
+do { \
+	u32 n = (_n); \
+	if (NGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \
+		common_hash ^= lo_hash_dword >> n; \
+	else if (NGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
+		bucket_hash ^= lo_hash_dword >> n; \
+	else if (NGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \
+		sig_hash ^= lo_hash_dword << (16 - n); \
+	if (NGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \
+		common_hash ^= hi_hash_dword >> n; \
+	else if (NGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
+		bucket_hash ^= hi_hash_dword >> n; \
+	else if (NGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \
+		sig_hash ^= hi_hash_dword << (16 - n); \
+} while (0)
+
+#define NGBE_COMPUTE_BKT_HASH_ITERATION(_n) \
+do { \
+	u32 n = (_n); \
+	if (NGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
+		bucket_hash ^= lo_hash_dword >> n; \
+	if (NGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
+		bucket_hash ^= hi_hash_dword >> n; \
+} while (0)
+
+/*
+ * These two macros are meant to address the fact that we have registers
+ * that are either all or in part big-endian.  As a result on big-endian
+ * systems we will end up byte swapping the value to little-endian before
+ * it is byte swapped again and written to the hardware in the original
+ * big-endian format.
+ */
+#define NGBE_STORE_AS_BE32(_value) \
+	(((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \
+	 (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24))
+
+#define NGBE_WRITE_REG_BE32(a, reg, value) \
+	wr32((a), (reg), NGBE_STORE_AS_BE32(NGBE_NTOHL(value)))
+
+#define NGBE_STORE_AS_BE16(_value) \
+	NGBE_NTOHS(((u16)(_value) >> 8) | ((u16)(_value) << 8))
+
+/**
+ *  ngbe_start_hw - Prepare hardware for Tx/Rx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware using the generic start_hw function
+ *  and the generation start_hw function.
+ *  Then performs revision-specific operations, if any.
+ **/
+s32 ngbe_start_hw(struct ngbe_hw *hw)
+{
+	int ret_val = 0;
+
+	DEBUGFUNC("\n");
+
+	/* Set the media type */
+	hw->phy.media_type = TCALL(hw, mac.ops.get_media_type);
+
+	/* PHY ops initialization must be done in reset_hw() */
+
+	/* Clear the VLAN filter table */
+	TCALL(hw, mac.ops.clear_vfta);
+
+	/* Clear statistics registers */
+	TCALL(hw, mac.ops.clear_hw_cntrs);
+
+	NGBE_WRITE_FLUSH(hw);
+
+	/* Setup flow control */
+	ret_val = TCALL(hw, mac.ops.setup_fc);
+
+	/* Clear adapter stopped flag */
+	hw->adapter_stopped = false;
+
+	/* We need to run link autotry after the driver loads */
+	hw->mac.autotry_restart = true;
+
+	return ret_val;
+}
+
+/**
+ *  ngbe_enable_rx_dma - Enable the Rx DMA unit on emerald
+ *  @hw: pointer to hardware structure
+ *  @regval: register value to write to RXCTRL
+ *
+ *  Enables the Rx DMA unit for emerald
+ **/
+s32 ngbe_enable_rx_dma(struct ngbe_hw *hw, u32 regval)
+{
+	DEBUGFUNC("\n");
+
+	/*
+	 * Workaround for emerald silicon errata when enabling the Rx datapath.
+	 * If traffic is incoming before we enable the Rx unit, it could hang
+	 * the Rx DMA unit.  Therefore, make sure the security engine is
+	 * completely disabled prior to enabling the Rx unit.
+	 */
+
+	TCALL(hw, mac.ops.disable_sec_rx_path);
+
+	if (regval & NGBE_RDB_PB_CTL_PBEN)
+		TCALL(hw, mac.ops.enable_rx);
+	else
+		TCALL(hw, mac.ops.disable_rx);
+
+	TCALL(hw, mac.ops.enable_sec_rx_path);
+
+	return 0;
+}
+
+/**
+ *  ngbe_init_flash_params - Initialize flash params
+ *  @hw: pointer to hardware structure
+ *
+ *  Initializes the EEPROM parameters ngbe_eeprom_info within the
+ *  ngbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ngbe_init_flash_params(struct ngbe_hw *hw)
+{
+	struct ngbe_flash_info *flash = &hw->flash;
+	u32 eec;
+
+	DEBUGFUNC("\n");
+
+	eec = 0x1000000;
+	flash->semaphore_delay = 10;
+	flash->dword_size = (eec >> 2);
+	flash->address_bits = 24;
+	DEBUGOUT3("FLASH params: size = %d, address bits: %d\n",
+		  flash->dword_size,
+		  flash->address_bits);
+
+	return 0;
+}
+
+/**
+ *  ngbe_read_flash_buffer - Read FLASH dword(s) using
+ *  fastest available method
+ *
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  dword in EEPROM to read
+ *  @dwords: number of dwords
+ *  @data: dword(s) read from the EEPROM
+ *
+ *  Retrieves 32 bit dword(s) read from EEPROM
+ **/
+s32 ngbe_read_flash_buffer(struct ngbe_hw *hw, u32 offset,
+					  u32 dwords, u32 *data)
+{
+	s32 status = 0;
+	u32 i;
+
+	DEBUGFUNC("\n");
+
+	TCALL(hw, eeprom.ops.init_params);
+
+	if (!dwords || offset + dwords >= hw->flash.dword_size) {
+		status = NGBE_ERR_INVALID_ARGUMENT;
+		ERROR_REPORT1(NGBE_ERROR_ARGUMENT, "Invalid FLASH arguments");
+		return status;
+	}
+
+	for (i = 0; i < dwords; i++) {
+		wr32(hw, NGBE_SPI_DATA, data[i]);
+		wr32(hw, NGBE_SPI_CMD,
+			NGBE_SPI_CMD_ADDR(offset + i) |
+			NGBE_SPI_CMD_CMD(0x0));
+
+		status = po32m(hw, NGBE_SPI_STATUS,
+			NGBE_SPI_STATUS_OPDONE, NGBE_SPI_STATUS_OPDONE,
+			NGBE_SPI_TIMEOUT, 0);
+		if (status) {
+			DEBUGOUT("FLASH read timed out\n");
+			break;
+		}
+	}
+
+	return status;
+}
+
+/**
+ *  ngbe_write_flash_buffer - Write FLASH dword(s) using
+ *  fastest available method
+ *
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  dword in EEPROM to write
+ *  @dwords: number of dwords
+ *  @data: dword(s) write from to EEPROM
+ *
+ **/
+s32 ngbe_write_flash_buffer(struct ngbe_hw *hw, u32 offset,
+					  u32 dwords, u32 *data)
+{
+	s32 status = 0;
+	u32 i;
+
+	DEBUGFUNC("\n");
+
+	TCALL(hw, eeprom.ops.init_params);
+
+	if (!dwords || offset + dwords >= hw->flash.dword_size) {
+		status = NGBE_ERR_INVALID_ARGUMENT;
+		ERROR_REPORT1(NGBE_ERROR_ARGUMENT, "Invalid FLASH arguments");
+		return status;
+	}
+
+	for (i = 0; i < dwords; i++) {
+		wr32(hw, NGBE_SPI_CMD,
+			NGBE_SPI_CMD_ADDR(offset + i) |
+			NGBE_SPI_CMD_CMD(0x1));
+
+		status = po32m(hw, NGBE_SPI_STATUS,
+			NGBE_SPI_STATUS_OPDONE, NGBE_SPI_STATUS_OPDONE,
+			NGBE_SPI_TIMEOUT, 0);
+		if (status != 0) {
+			DEBUGOUT("FLASH write timed out\n");
+			break;
+		}
+		data[i] = rd32(hw, NGBE_SPI_DATA);
+	}
+
+	return status;
+}
+
+/**
+ *  ngbe_init_eeprom_params - Initialize EEPROM params
+ *  @hw: pointer to hardware structure
+ *
+ *  Initializes the EEPROM parameters ngbe_eeprom_info within the
+ *  ngbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ngbe_init_eeprom_params(struct ngbe_hw *hw)
+{
+	struct ngbe_eeprom_info *eeprom = &hw->eeprom;
+	u16 eeprom_size;
+	s32 status = 0;
+
+	DEBUGFUNC("\n");
+
+	if (eeprom->type == ngbe_eeprom_uninitialized) {
+		eeprom->semaphore_delay = 10;
+		eeprom->type = ngbe_eeprom_none;
+
+		if (!(rd32(hw, NGBE_SPI_STATUS) &
+			NGBE_SPI_STATUS_FLASH_BYPASS)) {
+			eeprom->type = ngbe_flash;
+			eeprom_size = 4096;
+			eeprom->word_size = eeprom_size >> 1;
+
+			DEBUGOUT2("Eeprom params: type = %d, size = %d\n",
+				  eeprom->type, eeprom->word_size);
+		}
+	}
+
+	eeprom->sw_region_offset = 0x80;
+
+	return status;
+}
+
+/**
+ *  ngbe_read_ee_hostif - Read EEPROM word using a host interface cmd
+ *  assuming that the semaphore is already obtained.
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM using the hostif.
+ **/
+s32 ngbe_read_ee_hostif_data(struct ngbe_hw *hw, u16 offset,
+				   u16 *data)
+{
+	s32 status;
+	struct ngbe_hic_read_shadow_ram buffer;
+
+	DEBUGFUNC("\n");
+	buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
+	buffer.hdr.req.buf_lenh = 0;
+	buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
+	buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+	/* convert offset from words to bytes */
+	buffer.address = NGBE_CPU_TO_BE32(offset * 2);
+	/* one word */
+	buffer.length = NGBE_CPU_TO_BE16(sizeof(u16));
+
+	status = ngbe_host_interface_command(hw, (u32 *)&buffer,
+					      sizeof(buffer),
+					      NGBE_HI_COMMAND_TIMEOUT, false);
+
+	if (status)
+		return status;
+	if (ngbe_check_mng_access(hw))
+		*data = (u16)rd32a(hw, NGBE_MNG_MBOX,
+							FW_NVM_DATA_OFFSET);
+	else {
+		status = NGBE_ERR_MNG_ACCESS_FAILED;
+		return status;
+	}
+
+	return 0;
+}
+
+s32 ngbe_eepromcheck_cap(struct ngbe_hw *hw, u16 offset,
+								u32 *data)
+{
+	int tmp;
+	s32 status;
+	struct ngbe_hic_read_shadow_ram buffer;
+
+	DEBUGFUNC("\n");
+	buffer.hdr.req.cmd = FW_EEPROM_CHECK_STATUS;
+	buffer.hdr.req.buf_lenh = 0;
+	buffer.hdr.req.buf_lenl = 0;
+	buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+	/* convert offset from words to bytes */
+	buffer.address = 0;
+	/* one word */
+	buffer.length = 0;
+
+	status = ngbe_host_interface_command(hw, (u32 *)&buffer,
+											sizeof(buffer),
+											NGBE_HI_COMMAND_TIMEOUT, false);
+
+	if (status)
+		return status;
+	if (ngbe_check_mng_access(hw)) {
+		tmp = (u32)rd32a(hw, NGBE_MNG_MBOX, 1);
+		if (tmp == NGBE_CHECKSUM_CAP_ST_PASS) {
+			status = 0;
+		} else
+			status = NGBE_ERR_EEPROM_CHECKSUM;
+	} else {
+			status = NGBE_ERR_MNG_ACCESS_FAILED;
+			return status;
+	}
+
+	return status;
+}
+
+s32 ngbe_phy_signal_set(struct ngbe_hw *hw)
+{
+	s32 status;
+	struct ngbe_hic_read_shadow_ram buffer;
+
+	DEBUGFUNC("\n");
+	buffer.hdr.req.cmd = FW_PHY_SIGNAL;
+	buffer.hdr.req.buf_lenh = 0;
+	buffer.hdr.req.buf_lenl = 0;
+	buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+	/* convert offset from words to bytes */
+	buffer.address = 0;
+	/* one word */
+	buffer.length = 0;
+
+	status = ngbe_host_interface_pass_command(hw, (u32 *)&buffer,
+											sizeof(buffer),
+											NGBE_HI_COMMAND_TIMEOUT, false);
+
+	if (status)
+		return status;
+
+	return status;
+}
+
+/**
+ *  ngbe_read_ee_hostif - Read EEPROM word using a host interface cmd
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM using the hostif.
+ **/
+s32 ngbe_read_ee_hostif(struct ngbe_hw *hw, u16 offset,
+			      u16 *data)
+{
+	s32 status = 0;
+
+	DEBUGFUNC("\n");
+
+	if (TCALL(hw, mac.ops.acquire_swfw_sync,
+		NGBE_MNG_SWFW_SYNC_SW_FLASH) == 0) {
+		status = ngbe_read_ee_hostif_data(hw, offset, data);
+		TCALL(hw, mac.ops.release_swfw_sync,
+			NGBE_MNG_SWFW_SYNC_SW_FLASH);
+	} else {
+		status = NGBE_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+/**
+ *  ngbe_read_ee_hostif_buffer- Read EEPROM word(s) using hostif
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @words: number of words
+ *  @data: word(s) read from the EEPROM
+ *
+ *  Reads a 16 bit word(s) from the EEPROM using the hostif.
+ **/
+s32 ngbe_read_ee_hostif_buffer(struct ngbe_hw *hw,
+				     u16 offset, u16 words, u16 *data)
+{
+	struct ngbe_hic_read_shadow_ram buffer;
+	u32 current_word = 0;
+	u16 words_to_read;
+	s32 status;
+	u32 i;
+	u32 value = 0;
+
+	DEBUGFUNC("\n");
+
+	/* Take semaphore for the entire operation. */
+	status = TCALL(hw, mac.ops.acquire_swfw_sync,
+			NGBE_MNG_SWFW_SYNC_SW_FLASH);
+	if (status) {
+		DEBUGOUT("EEPROM read buffer - semaphore failed\n");
+		return status;
+	}
+	while (words) {
+		if (words > FW_MAX_READ_BUFFER_SIZE / 2)
+			words_to_read = FW_MAX_READ_BUFFER_SIZE / 2;
+		else
+			words_to_read = words;
+
+		buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
+		buffer.hdr.req.buf_lenh = 0;
+		buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
+		buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+		/* convert offset from words to bytes */
+		buffer.address = NGBE_CPU_TO_BE32((offset + current_word) * 2);
+		buffer.length = NGBE_CPU_TO_BE16(words_to_read * 2);
+
+		status = ngbe_host_interface_command(hw, (u32 *)&buffer,
+						      sizeof(buffer),
+						      NGBE_HI_COMMAND_TIMEOUT,
+						      false);
+
+		if (status) {
+			DEBUGOUT("Host interface command failed\n");
+			goto out;
+		}
+
+		for (i = 0; i < words_to_read; i++) {
+			u32 reg = NGBE_MNG_MBOX + (FW_NVM_DATA_OFFSET << 2) +
+				  2 * i;
+			if (ngbe_check_mng_access(hw))
+				value = rd32(hw, reg);
+			else {
+				status = NGBE_ERR_MNG_ACCESS_FAILED;
+				goto out;
+			}
+			data[current_word] = (u16)(value & 0xffff);
+			current_word++;
+			i++;
+			if (i < words_to_read) {
+				value >>= 16;
+				data[current_word] = (u16)(value & 0xffff);
+				current_word++;
+			}
+		}
+		words -= words_to_read;
+	}
+
+out:
+	TCALL(hw, mac.ops.release_swfw_sync,
+		NGBE_MNG_SWFW_SYNC_SW_FLASH);
+	return status;
+}
+
+
+/**
+ *  ngbe_read_ee_hostif - Read EEPROM word using a host interface cmd
+ *  assuming that the semaphore is already obtained.
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 32 bit word from the EEPROM using the hostif.
+ **/
+s32 ngbe_read_ee_hostif_data32(struct ngbe_hw *hw, u16 offset,
+					u32 *data)
+{
+	s32 status;
+	struct ngbe_hic_read_shadow_ram buffer;
+
+	DEBUGFUNC("\n");
+	buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
+	buffer.hdr.req.buf_lenh = 0;
+	buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
+	buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+	/* convert offset from words to bytes */
+	buffer.address = NGBE_CPU_TO_BE32(offset * 2);
+	/* one word */
+	buffer.length = NGBE_CPU_TO_BE16(sizeof(u32));
+
+	status = ngbe_host_interface_command(hw, (u32 *)&buffer,
+						sizeof(buffer),
+						NGBE_HI_COMMAND_TIMEOUT, false);
+	if (status)
+		return status;
+	if (ngbe_check_mng_access(hw))
+		*data = (u32)rd32a(hw, NGBE_MNG_MBOX, FW_NVM_DATA_OFFSET);
+	else {
+		status = NGBE_ERR_MNG_ACCESS_FAILED;
+		return status;
+	}
+	return 0;
+}
+
+/**
+ *  ngbe_read_ee_hostif - Read EEPROM word using a host interface cmd
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 32 bit word from the EEPROM using the hostif.
+ **/
+s32 ngbe_read_ee_hostif32(struct ngbe_hw *hw, u16 offset,
+					   u32 *data)
+{
+	s32 status = 0;
+
+	DEBUGFUNC("\n");
+
+	if (TCALL(hw, mac.ops.acquire_swfw_sync, NGBE_MNG_SWFW_SYNC_SW_FLASH) == 0) {
+		status = ngbe_read_ee_hostif_data32(hw, offset, data);
+		TCALL(hw, mac.ops.release_swfw_sync,
+					NGBE_MNG_SWFW_SYNC_SW_FLASH);
+	} else {
+		status = NGBE_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+
+/**
+ *  ngbe_write_ee_hostif - Write EEPROM word using hostif
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @data: word write to the EEPROM
+ *
+ *  Write a 16 bit word to the EEPROM using the hostif.
+ **/
+s32 ngbe_write_ee_hostif_data(struct ngbe_hw *hw, u16 offset,
+				    u16 data)
+{
+	s32 status;
+	struct ngbe_hic_write_shadow_ram buffer;
+
+	DEBUGFUNC("\n");
+
+	buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD;
+	buffer.hdr.req.buf_lenh = 0;
+	buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN;
+	buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+	/* one word */
+	buffer.length = NGBE_CPU_TO_BE16(sizeof(u16));
+	buffer.data = data;
+	buffer.address = NGBE_CPU_TO_BE32(offset * 2);
+
+	status = ngbe_host_interface_command(hw, (u32 *)&buffer,
+					      sizeof(buffer),
+					      NGBE_HI_COMMAND_TIMEOUT, false);
+
+	return status;
+}
+
+/**
+ *  ngbe_write_ee_hostif - Write EEPROM word using hostif
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @data: word write to the EEPROM
+ *
+ *  Write a 16 bit word to the EEPROM using the hostif.
+ **/
+s32 ngbe_write_ee_hostif(struct ngbe_hw *hw, u16 offset,
+			       u16 data)
+{
+	s32 status = 0;
+
+	DEBUGFUNC("\n");
+
+	if (TCALL(hw, mac.ops.acquire_swfw_sync,
+		NGBE_MNG_SWFW_SYNC_SW_FLASH) == 0) {
+		status = ngbe_write_ee_hostif_data(hw, offset, data);
+		TCALL(hw, mac.ops.release_swfw_sync,
+			NGBE_MNG_SWFW_SYNC_SW_FLASH);
+	} else {
+		DEBUGOUT("write ee hostif failed to get semaphore");
+		status = NGBE_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+/**
+ *  ngbe_write_ee_hostif - Write EEPROM word using hostif
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @data: word write to the EEPROM
+ *
+ *  Write a 16 bit word to the EEPROM using the hostif.
+ **/
+s32 ngbe_write_ee_hostif_data32(struct ngbe_hw *hw, u16 offset,
+								   u32 data)
+{
+	s32 status;
+	struct ngbe_hic_write_shadow_ram buffer;
+
+	DEBUGFUNC("\n");
+
+	buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD;
+	buffer.hdr.req.buf_lenh = 0;
+	buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN;
+	buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+	/* one word */
+	buffer.length = NGBE_CPU_TO_BE16(sizeof(u32));
+	buffer.data = data;
+	buffer.address = NGBE_CPU_TO_BE32(offset * 2);
+
+	status = ngbe_host_interface_command(hw, (u32 *)&buffer,
+										 sizeof(buffer),
+										 NGBE_HI_COMMAND_TIMEOUT, false);
+
+	return status;
+}
+
+/***  ngbe_write_ee_hostif - Write EEPROM word using hostif
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @data: word write to the EEPROM
+ *
+ *  Write a 16 bit word to the EEPROM using the hostif.
+ **/
+s32 ngbe_write_ee_hostif32(struct ngbe_hw *hw, u16 offset,
+							  u32 data)
+{
+	s32 status = 0;
+
+	DEBUGFUNC("\n");
+
+	if (TCALL(hw, mac.ops.acquire_swfw_sync,
+		NGBE_MNG_SWFW_SYNC_SW_FLASH) == 0) {
+		status = ngbe_write_ee_hostif_data32(hw, offset, data);
+		TCALL(hw, mac.ops.release_swfw_sync,
+				   NGBE_MNG_SWFW_SYNC_SW_FLASH);
+	} else {
+		DEBUGOUT("write ee hostif failed to get semaphore");
+			   status = NGBE_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+
+/**
+ *  ngbe_write_ee_hostif_buffer - Write EEPROM word(s) using hostif
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @words: number of words
+ *  @data: word(s) write to the EEPROM
+ *
+ *  Write a 16 bit word(s) to the EEPROM using the hostif.
+ **/
+s32 ngbe_write_ee_hostif_buffer(struct ngbe_hw *hw,
+				      u16 offset, u16 words, u16 *data)
+{
+	s32 status = 0;
+	u16 i = 0;
+
+	DEBUGFUNC("\n");
+
+	/* Take semaphore for the entire operation. */
+	status = TCALL(hw, mac.ops.acquire_swfw_sync,
+		       NGBE_MNG_SWFW_SYNC_SW_FLASH);
+	if (status != 0) {
+		DEBUGOUT("EEPROM write buffer - semaphore failed\n");
+		return status;
+	}
+
+	for (i = 0; i < words; i++) {
+		status = ngbe_write_ee_hostif_data(hw, offset + i,
+							 data[i]);
+
+		if (status != 0) {
+			DEBUGOUT("Eeprom buffered write failed\n");
+			break;
+		}
+	}
+
+	TCALL(hw, mac.ops.release_swfw_sync, NGBE_MNG_SWFW_SYNC_SW_FLASH);
+	return status;
+}
+
+
+
+/**
+ *  ngbe_calc_eeprom_checksum - Calculates and returns the checksum
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns a negative error code on error, or the 16-bit checksum
+ **/
+s32 ngbe_calc_eeprom_checksum(struct ngbe_hw *hw)
+{
+	u16 *buffer = NULL;
+	u32 buffer_size = 0;
+
+	u16 *eeprom_ptrs = NULL;
+	u16 *local_buffer;
+	s32 status;
+	u16 checksum = 0;
+	u16 i;
+
+	DEBUGFUNC("\n");
+
+	TCALL(hw, eeprom.ops.init_params);
+
+	if (!buffer) {
+		eeprom_ptrs = (u16 *)vmalloc(NGBE_EEPROM_LAST_WORD *
+				sizeof(u16));
+		if (!eeprom_ptrs)
+			return NGBE_ERR_NO_SPACE;
+		/* Read pointer area */
+		status = ngbe_read_ee_hostif_buffer(hw, 0,
+						     NGBE_EEPROM_LAST_WORD,
+						     eeprom_ptrs);
+		if (status) {
+			DEBUGOUT("Failed to read EEPROM image\n");
+			return status;
+		}
+		local_buffer = eeprom_ptrs;
+	} else {
+		if (buffer_size < NGBE_EEPROM_LAST_WORD)
+			return NGBE_ERR_PARAM;
+		local_buffer = buffer;
+	}
+
+	for (i = 0; i < NGBE_EEPROM_LAST_WORD; i++)
+		if (i != hw->eeprom.sw_region_offset + NGBE_EEPROM_CHECKSUM)
+			checksum += local_buffer[i];
+
+	checksum = (u16)NGBE_EEPROM_SUM - checksum;
+	if (eeprom_ptrs)
+		vfree(eeprom_ptrs);
+
+	return (s32)checksum;
+}
+
+/**
+ * ngbe_update_eeprom_checksum - Updates the EEPROM checksum and flash
+ * @hw: pointer to hardware structure
+ *
+ * After writing EEPROM to shadow RAM using EEWR register, software calculates
+ * checksum and updates the EEPROM and instructs the hardware to update
+ * the flash.
+ **/
+s32 ngbe_update_eeprom_checksum(struct ngbe_hw *hw)
+{
+	s32 status;
+	u16 checksum = 0;
+
+	DEBUGFUNC("\n");
+
+	/* Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = ngbe_read_ee_hostif(hw, 0, &checksum);
+	if (status) {
+		DEBUGOUT("EEPROM read failed\n");
+		return status;
+	}
+
+	status = ngbe_calc_eeprom_checksum(hw);
+	if (status < 0)
+		return status;
+
+	checksum = (u16)(status & 0xffff);
+
+	status = ngbe_write_ee_hostif(hw, NGBE_EEPROM_CHECKSUM,
+					    checksum);
+	if (status)
+		return status;
+
+	return status;
+}
+
+/**
+ *  ngbe_validate_eeprom_checksum - Validate EEPROM checksum
+ *  @hw: pointer to hardware structure
+ *  @checksum_val: calculated checksum
+ *
+ *  Performs checksum calculation and validates the EEPROM checksum.  If the
+ *  caller does not need checksum_val, the value can be NULL.
+ **/
+s32 ngbe_validate_eeprom_checksum(struct ngbe_hw *hw,
+					    u16 *checksum_val)
+{
+	s32 status;
+	u16 checksum;
+	u16 read_checksum = 0;
+
+	DEBUGFUNC("\n");
+
+	/* Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = TCALL(hw, eeprom.ops.read, 0, &checksum);
+	if (status) {
+		DEBUGOUT("EEPROM read failed\n");
+		return status;
+	}
+
+	status = TCALL(hw, eeprom.ops.calc_checksum);
+	if (status < 0)
+		return status;
+
+	checksum = (u16)(status & 0xffff);
+
+	status = ngbe_read_ee_hostif(hw, hw->eeprom.sw_region_offset +
+					NGBE_EEPROM_CHECKSUM,
+					&read_checksum);
+	if (status)
+		return status;
+
+	/* Verify read checksum from EEPROM is the same as
+	 * calculated checksum
+	 */
+	if (read_checksum != checksum) {
+		status = NGBE_ERR_EEPROM_CHECKSUM;
+		ERROR_REPORT1(NGBE_ERROR_INVALID_STATE,
+			     "Invalid EEPROM checksum\n");
+	}
+
+	/* If the user cares, return the calculated checksum */
+	if (checksum_val)
+		*checksum_val = checksum;
+
+	return status;
+}
+
+/**
+ *  ngbe_check_mac_link - Determine link and speed status
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @link_up: true when link is up
+ *  @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ *  Reads the links register to determine if link is up and the current speed
+ **/
+s32 ngbe_check_mac_link(struct ngbe_hw *hw,
+						u32 *speed,
+						bool *link_up,
+						bool link_up_wait_to_complete)
+{
+	u32 i;
+	u16 value = 0;
+	s32 status = 0;
+	u16 speed_sta = 0;
+
+	DEBUGFUNC("ngbe_check_mac_link");
+
+	if (link_up_wait_to_complete) {
+		for (i = 0; i < NGBE_LINK_UP_TIME; i++) {
+			status = TCALL(hw, phy.ops.read_reg, 0x1A, 0xA43, &value);
+			if (!status && (value & 0x4)) {
+				*link_up = true;
+				break;
+			} else {
+				*link_up = false;
+			}
+			msleep(100);
+		}
+	} else {
+		status = TCALL(hw, phy.ops.read_reg, 0x1A, 0xA43, &value);
+		if (!status && (value & 0x4)) {
+			*link_up = true;
+		} else {
+			*link_up = false;
+		}
+	}
+
+	speed_sta = value & 0x38;
+	if (*link_up) {
+		if (speed_sta == 0x28) {
+			*speed = NGBE_LINK_SPEED_1GB_FULL;
+		} else if (speed_sta == 0x18) {
+			*speed = NGBE_LINK_SPEED_100_FULL;
+		} else if (speed_sta == 0x8) {
+			*speed = NGBE_LINK_SPEED_10_FULL;
+		}
+	} else
+		*speed = NGBE_LINK_SPEED_UNKNOWN;
+
+	if (*speed == NGBE_LINK_SPEED_1GB_FULL) {
+		status = TCALL(hw, phy.ops.read_reg, 0xA, 0x0, &value);
+		if (!status && !(value & 0x2000)) {
+			*link_up = false;
+		}
+	}
+	return status;
+}
+
+s32 ngbe_check_mac_link_mdi(struct ngbe_hw *hw,
+							u32 *speed,
+							bool *link_up,
+							bool link_up_wait_to_complete)
+{
+	u32 i;
+	u16 value = 0;
+	s32 status = 0;
+	u16 speed_sta = 0;
+
+	DEBUGFUNC("ngbe_check_mac_link_mdi");
+
+	if (hw->phy.type == ngbe_phy_m88e1512)
+		/* select page 0 */
+		status = TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 0);
+	else
+		/* select page 1 */
+		status = TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 1);
+	status = TCALL(hw, phy.ops.read_reg_mdi, 17, 0, &value);
+	if (link_up_wait_to_complete) {
+		for (i = 0; i < NGBE_LINK_UP_TIME; i++) {
+			status = TCALL(hw, phy.ops.read_reg_mdi, 17, 0, &value);
+			if (value & 0x400) {
+				*link_up = true;
+				break;
+			} else {
+				*link_up = false;
+			}
+			msleep(100);
+		}
+	} else {
+			status = TCALL(hw, phy.ops.read_reg_mdi, 17, 0, &value);
+			if (value & 0x400) {
+				*link_up = true;
+			} else {
+				*link_up = false;
+			}
+	}
+
+	speed_sta = value & 0xC000;
+	if (*link_up) {
+			if (speed_sta == 0x8000) {
+				*speed = NGBE_LINK_SPEED_1GB_FULL;
+			} else if (speed_sta == 0x4000) {
+				*speed = NGBE_LINK_SPEED_100_FULL;
+			} else if (speed_sta == 0x0000) {
+				*speed = NGBE_LINK_SPEED_10_FULL;
+			}
+	} else
+		*speed = NGBE_LINK_SPEED_UNKNOWN;
+
+	return status;
+}
+
+s32 ngbe_check_mac_link_yt8521s(struct ngbe_hw *hw,
+							u32 *speed,
+							bool *link_up,
+							bool link_up_wait_to_complete)
+{
+	u32 i;
+	u16 value = 0;
+	s32 status = 0;
+	u16 speed_sta = 0;
+
+	DEBUGFUNC("ngbe_check_mac_link_yt");
+
+	status = ngbe_phy_read_reg_sds_mii_yt8521s(hw, 0x11, 0, &value);
+	if (link_up_wait_to_complete) {
+		for (i = 0; i < NGBE_LINK_UP_TIME; i++) {
+			status = ngbe_phy_read_reg_sds_mii_yt8521s(hw, 0x11, 0, &value);
+			if (value & 0x400) {
+				*link_up = true;
+				break;
+			} else {
+				*link_up = false;
+			}
+			msleep(100);
+		}
+	} else {
+			status = ngbe_phy_read_reg_sds_mii_yt8521s(hw, 0x11, 0, &value);
+			if (value & 0x400) {
+				*link_up = true;
+			} else {
+				*link_up = false;
+				ngbe_phy_read_reg_mdi(hw, 0x11, 0, &value);
+				if (value & 0x400) {
+					*link_up = true;
+					//printk("yt8521: diankou link is up\n");
+				} else {
+					*link_up = false;
+					//printk("yt8521: diankou link is down\n");
+				}
+			}
+	}
+
+	speed_sta = value & 0xC000;
+	if (*link_up) {
+			if (speed_sta == 0x8000) {
+				*speed = NGBE_LINK_SPEED_1GB_FULL;
+			} else if (speed_sta == 0x4000) {
+				*speed = NGBE_LINK_SPEED_100_FULL;
+			} else if (speed_sta == 0x0000) {
+				*speed = NGBE_LINK_SPEED_10_FULL;
+			}
+	} else
+		*speed = NGBE_LINK_SPEED_UNKNOWN;
+	return status;
+}
+
+s32 ngbe_check_mac_link_zte(struct ngbe_hw *hw,
+									u32 *speed,
+									bool *link_up,
+									bool link_up_wait_to_complete)
+{
+	u32 i;
+	u16 value = 0;
+	s32 status = 0;
+	u16 speed_sta = 0;
+
+	DEBUGFUNC("ngbe_check_mac_link_zte");
+
+	/* PHY status register */
+	status = TCALL(hw, phy.ops.read_reg_mdi, 0x1a, 0, &value);
+
+	if (link_up_wait_to_complete) {
+		for (i = 0; i < NGBE_LINK_UP_TIME; i++) {
+			status = TCALL(hw, phy.ops.read_reg_mdi, 0x1a, 0, &value);
+			/*bit 6->0x0040*/
+			if (value & 0x40) {
+				*link_up = true;
+				break;
+			} else {
+				*link_up = false;
+			}
+				msleep(100);
+			}
+	} else {
+		status = TCALL(hw, phy.ops.read_reg_mdi, 0x1a, 0, &value);
+		if (value & 0x40) {
+			*link_up = true;
+		} else {
+			*link_up = false;
+		}
+	}
+
+	speed_sta = value & 0xC000;
+	if (*link_up) {
+		if (speed_sta == 0x0200) {
+			*speed = NGBE_LINK_SPEED_1GB_FULL;
+		} else if (speed_sta == 0x0100) {
+			*speed = NGBE_LINK_SPEED_100_FULL;
+		} else if (speed_sta == 0x0000) {
+			*speed = NGBE_LINK_SPEED_10_FULL;
+		}
+	} else {
+		*speed = NGBE_LINK_SPEED_UNKNOWN;
+	}
+	return status;
+}
+
+/**
+ *  ngbe_setup_eee - Enable/disable EEE support
+ *  @hw: pointer to the HW structure
+ *  @enable_eee: boolean flag to enable EEE
+ *
+ *  Enable/disable EEE based on enable_eee flag.
+ *  Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C
+ *  are modified.
+ *
+ **/
+s32 ngbe_setup_eee(struct ngbe_hw *hw, bool enable_eee)
+{
+	/* fix eee */
+	UNREFERENCED_PARAMETER(hw);
+	UNREFERENCED_PARAMETER(enable_eee);
+	DEBUGFUNC("\n");
+
+	return 0;
+}
+
+s32 ngbe_init_ops_common(struct ngbe_hw *hw)
+{
+	struct ngbe_mac_info *mac = &hw->mac;
+	struct ngbe_eeprom_info *eeprom = &hw->eeprom;
+	struct ngbe_flash_info *flash = &hw->flash;
+
+	/* MAC */
+	mac->ops.init_hw = ngbe_init_hw;
+	mac->ops.clear_hw_cntrs = ngbe_clear_hw_cntrs;
+	mac->ops.get_mac_addr = ngbe_get_mac_addr;
+	mac->ops.stop_adapter = ngbe_stop_adapter;
+	mac->ops.get_bus_info = ngbe_get_bus_info;
+	mac->ops.set_lan_id = ngbe_set_lan_id_multi_port_pcie;
+	mac->ops.acquire_swfw_sync = ngbe_acquire_swfw_sync;
+	mac->ops.release_swfw_sync = ngbe_release_swfw_sync;
+	mac->ops.reset_hw = ngbe_reset_hw;
+	mac->ops.get_media_type = ngbe_get_media_type;
+	mac->ops.disable_sec_rx_path = ngbe_disable_sec_rx_path;
+	mac->ops.enable_sec_rx_path = ngbe_enable_sec_rx_path;
+	mac->ops.enable_rx_dma = ngbe_enable_rx_dma;
+	mac->ops.start_hw = ngbe_start_hw;
+	mac->ops.get_device_caps = ngbe_get_device_caps;
+	mac->ops.setup_eee = ngbe_setup_eee;
+
+	/* LEDs */
+	mac->ops.led_on = ngbe_led_on;
+	mac->ops.led_off = ngbe_led_off;
+
+	/* RAR, Multicast, VLAN */
+	mac->ops.set_rar = ngbe_set_rar;
+	mac->ops.clear_rar = ngbe_clear_rar;
+	mac->ops.init_rx_addrs = ngbe_init_rx_addrs;
+	mac->ops.update_uc_addr_list = ngbe_update_uc_addr_list;
+	mac->ops.update_mc_addr_list = ngbe_update_mc_addr_list;
+	mac->ops.enable_mc = ngbe_enable_mc;
+	mac->ops.disable_mc = ngbe_disable_mc;
+	mac->ops.enable_rx = ngbe_enable_rx;
+	mac->ops.disable_rx = ngbe_disable_rx;
+	mac->ops.set_vmdq_san_mac = ngbe_set_vmdq_san_mac;
+	mac->ops.insert_mac_addr = ngbe_insert_mac_addr;
+	mac->rar_highwater = 1;
+	mac->ops.set_vfta = ngbe_set_vfta;
+	mac->ops.set_vlvf = ngbe_set_vlvf;
+	mac->ops.clear_vfta = ngbe_clear_vfta;
+	mac->ops.init_uta_tables = ngbe_init_uta_tables;
+	mac->ops.set_mac_anti_spoofing = ngbe_set_mac_anti_spoofing;
+	mac->ops.set_vlan_anti_spoofing = ngbe_set_vlan_anti_spoofing;
+	mac->ops.set_ethertype_anti_spoofing =
+				ngbe_set_ethertype_anti_spoofing;
+
+	/* Flow Control */
+	mac->ops.fc_enable = ngbe_fc_enable;
+	mac->ops.setup_fc = ngbe_setup_fc;
+
+	/* Link */
+	mac->ops.get_link_capabilities = ngbe_get_link_capabilities;
+	mac->ops.check_link = ngbe_check_mac_link;
+	mac->ops.setup_rxpba = ngbe_set_rxpba;
+
+	mac->mcft_size          = NGBE_SP_MC_TBL_SIZE;
+	mac->vft_size           = NGBE_SP_VFT_TBL_SIZE;
+	mac->num_rar_entries    = NGBE_SP_RAR_ENTRIES;
+	mac->rx_pb_size         = NGBE_SP_RX_PB_SIZE;
+	mac->max_rx_queues      = NGBE_SP_MAX_RX_QUEUES;
+	mac->max_tx_queues      = NGBE_SP_MAX_TX_QUEUES;
+	mac->max_msix_vectors   = ngbe_get_pcie_msix_count(hw);
+
+	mac->arc_subsystem_valid = (rd32(hw, NGBE_MIS_ST) &
+				   NGBE_MIS_ST_MNG_INIT_DN) ? true : false;
+
+	hw->mbx.ops.init_params = ngbe_init_mbx_params_pf;
+
+	/* EEPROM */
+	eeprom->ops.init_params = ngbe_init_eeprom_params;
+	eeprom->ops.calc_checksum = ngbe_calc_eeprom_checksum;
+	eeprom->ops.read = ngbe_read_ee_hostif;
+	eeprom->ops.read_buffer = ngbe_read_ee_hostif_buffer;
+	eeprom->ops.read32 = ngbe_read_ee_hostif32;
+	eeprom->ops.write = ngbe_write_ee_hostif;
+	eeprom->ops.write_buffer = ngbe_write_ee_hostif_buffer;
+	eeprom->ops.update_checksum = ngbe_update_eeprom_checksum;
+	eeprom->ops.validate_checksum = ngbe_validate_eeprom_checksum;
+	eeprom->ops.eeprom_chksum_cap_st = ngbe_eepromcheck_cap;
+	eeprom->ops.phy_signal_set = ngbe_phy_signal_set;
+
+	/* FLASH */
+	flash->ops.init_params = ngbe_init_flash_params;
+	flash->ops.read_buffer = ngbe_read_flash_buffer;
+	flash->ops.write_buffer = ngbe_write_flash_buffer;
+
+	/* Manageability interface */
+	mac->ops.set_fw_drv_ver = ngbe_set_fw_drv_ver;
+
+	mac->ops.get_thermal_sensor_data =
+					ngbe_get_thermal_sensor_data;
+	mac->ops.init_thermal_sensor_thresh =
+					ngbe_init_thermal_sensor_thresh;
+
+	return NGBE_OK;
+}
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_hw.h b/drivers/net/ethernet/netswift/ngbe/ngbe_hw.h
new file mode 100644
index 0000000000000..d7f06643f258a
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_hw.h
@@ -0,0 +1,280 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#ifndef _NGBE_HW_H_
+#define _NGBE_HW_H_
+
+#define NGBE_EMC_INTERNAL_DATA         0x00
+#define NGBE_EMC_INTERNAL_THERM_LIMIT  0x20
+#define NGBE_EMC_DIODE1_DATA           0x01
+#define NGBE_EMC_DIODE1_THERM_LIMIT    0x19
+#define NGBE_EMC_DIODE2_DATA           0x23
+#define NGBE_EMC_DIODE2_THERM_LIMIT    0x1A
+#define NGBE_EMC_DIODE3_DATA           0x2A
+#define NGBE_EMC_DIODE3_THERM_LIMIT    0x30
+
+#define SPI_CLK_DIV                        3
+
+#define SPI_CMD_ERASE_CHIP                 4  // SPI erase chip command
+#define SPI_CMD_ERASE_SECTOR               3  // SPI erase sector command
+#define SPI_CMD_WRITE_DWORD                0  // SPI write a dword command
+#define SPI_CMD_READ_DWORD                 1  // SPI read a dword command
+#define SPI_CMD_USER_CMD                   5  // SPI user command
+
+#define SPI_CLK_CMD_OFFSET                28  // SPI command field offset in Command register
+#define SPI_CLK_DIV_OFFSET                25  // SPI clock divide field offset in Command register
+
+#define SPI_TIME_OUT_VALUE             10000
+#define SPI_SECTOR_SIZE          (4 * 1024)  // FLASH sector size is 64KB
+#define SPI_H_CMD_REG_ADDR           0x10104  // SPI Command register address
+#define SPI_H_DAT_REG_ADDR           0x10108  // SPI Data register address
+#define SPI_H_STA_REG_ADDR           0x1010c  // SPI Status register address
+#define SPI_H_USR_CMD_REG_ADDR       0x10110  // SPI User Command register address
+#define SPI_CMD_CFG1_ADDR            0x10118  // Flash command configuration register 1
+#define MISC_RST_REG_ADDR            0x1000c  // Misc reset register address
+#define MGR_FLASH_RELOAD_REG_ADDR    0x101a0  // MGR reload flash read
+
+#define MAC_ADDR0_WORD0_OFFSET_1G    0x006000c  // MAC Address for LAN0, stored in external FLASH
+#define MAC_ADDR0_WORD1_OFFSET_1G    0x0060014
+#define MAC_ADDR1_WORD0_OFFSET_1G    0x006800c  // MAC Address for LAN1, stored in external FLASH
+#define MAC_ADDR1_WORD1_OFFSET_1G    0x0068014
+#define MAC_ADDR2_WORD0_OFFSET_1G    0x007000c  // MAC Address for LAN2, stored in external FLASH
+#define MAC_ADDR2_WORD1_OFFSET_1G    0x0070014
+#define MAC_ADDR3_WORD0_OFFSET_1G    0x007800c  // MAC Address for LAN3, stored in external FLASH
+#define MAC_ADDR3_WORD1_OFFSET_1G    0x0078014
+#define PRODUCT_SERIAL_NUM_OFFSET_1G    0x00f0000  // Product Serial Number, stored in external FLASH last sector
+
+struct ngbe_hic_read_cab {
+	union ngbe_hic_hdr2 hdr;
+	union {
+		u8 d8[252];
+		u16 d16[126];
+		u32 d32[63];
+	} dbuf;
+};
+
+
+/**
+ * Packet Type decoding
+ **/
+/* ngbe_dec_ptype.mac: outer mac */
+enum ngbe_dec_ptype_mac {
+	NGBE_DEC_PTYPE_MAC_IP = 0,
+	NGBE_DEC_PTYPE_MAC_L2 = 2,
+	NGBE_DEC_PTYPE_MAC_FCOE = 3,
+};
+
+/* ngbe_dec_ptype.[e]ip: outer&encaped ip */
+#define NGBE_DEC_PTYPE_IP_FRAG (0x4)
+enum ngbe_dec_ptype_ip {
+	NGBE_DEC_PTYPE_IP_NONE = 0,
+	NGBE_DEC_PTYPE_IP_IPV4 = 1,
+	NGBE_DEC_PTYPE_IP_IPV6 = 2,
+	NGBE_DEC_PTYPE_IP_FGV4 =
+		(NGBE_DEC_PTYPE_IP_FRAG | NGBE_DEC_PTYPE_IP_IPV4),
+	NGBE_DEC_PTYPE_IP_FGV6 =
+		(NGBE_DEC_PTYPE_IP_FRAG | NGBE_DEC_PTYPE_IP_IPV6),
+};
+
+/* ngbe_dec_ptype.etype: encaped type */
+enum ngbe_dec_ptype_etype {
+	NGBE_DEC_PTYPE_ETYPE_NONE = 0,
+	NGBE_DEC_PTYPE_ETYPE_IPIP = 1, /* IP+IP */
+	NGBE_DEC_PTYPE_ETYPE_IG = 2, /* IP+GRE */
+	NGBE_DEC_PTYPE_ETYPE_IGM = 3, /* IP+GRE+MAC */
+	NGBE_DEC_PTYPE_ETYPE_IGMV = 4, /* IP+GRE+MAC+VLAN */
+};
+
+/* ngbe_dec_ptype.proto: payload proto */
+enum ngbe_dec_ptype_prot {
+	NGBE_DEC_PTYPE_PROT_NONE = 0,
+	NGBE_DEC_PTYPE_PROT_UDP = 1,
+	NGBE_DEC_PTYPE_PROT_TCP = 2,
+	NGBE_DEC_PTYPE_PROT_SCTP = 3,
+	NGBE_DEC_PTYPE_PROT_ICMP = 4,
+	NGBE_DEC_PTYPE_PROT_TS = 5, /* time sync */
+};
+
+/* ngbe_dec_ptype.layer: payload layer */
+enum ngbe_dec_ptype_layer {
+	NGBE_DEC_PTYPE_LAYER_NONE = 0,
+	NGBE_DEC_PTYPE_LAYER_PAY2 = 1,
+	NGBE_DEC_PTYPE_LAYER_PAY3 = 2,
+	NGBE_DEC_PTYPE_LAYER_PAY4 = 3,
+};
+
+struct ngbe_dec_ptype {
+	u32 ptype:8;
+	u32 known:1;
+	u32 mac:2; /* outer mac */
+	u32 ip:3; /* outer ip*/
+	u32 etype:3; /* encaped type */
+	u32 eip:3; /* encaped ip */
+	u32 prot:4; /* payload proto */
+	u32 layer:3; /* payload layer */
+};
+typedef struct ngbe_dec_ptype ngbe_dptype;
+
+
+u16 ngbe_get_pcie_msix_count(struct ngbe_hw *hw);
+s32 ngbe_init_hw(struct ngbe_hw *hw);
+s32 ngbe_start_hw(struct ngbe_hw *hw);
+s32 ngbe_clear_hw_cntrs(struct ngbe_hw *hw);
+s32 ngbe_read_pba_string(struct ngbe_hw *hw, u8 *pba_num,
+				  u32 pba_num_size);
+s32 ngbe_get_mac_addr(struct ngbe_hw *hw, u8 *mac_addr);
+s32 ngbe_get_bus_info(struct ngbe_hw *hw);
+void ngbe_set_pci_config_data(struct ngbe_hw *hw, u16 link_status);
+void ngbe_set_lan_id_multi_port_pcie(struct ngbe_hw *hw);
+s32 ngbe_stop_adapter(struct ngbe_hw *hw);
+
+s32 ngbe_led_on(struct ngbe_hw *hw, u32 index);
+s32 ngbe_led_off(struct ngbe_hw *hw, u32 index);
+
+s32 ngbe_set_rar(struct ngbe_hw *hw, u32 index, u8 *addr, u64 pools,
+			  u32 enable_addr);
+s32 ngbe_clear_rar(struct ngbe_hw *hw, u32 index);
+s32 ngbe_init_rx_addrs(struct ngbe_hw *hw);
+s32 ngbe_update_mc_addr_list(struct ngbe_hw *hw, u8 *mc_addr_list,
+				      u32 mc_addr_count,
+				      ngbe_mc_addr_itr func, bool clear);
+s32 ngbe_update_uc_addr_list(struct ngbe_hw *hw, u8 *addr_list,
+				      u32 addr_count, ngbe_mc_addr_itr func);
+s32 ngbe_enable_mc(struct ngbe_hw *hw);
+s32 ngbe_disable_mc(struct ngbe_hw *hw);
+s32 ngbe_disable_sec_rx_path(struct ngbe_hw *hw);
+s32 ngbe_enable_sec_rx_path(struct ngbe_hw *hw);
+
+s32 ngbe_fc_enable(struct ngbe_hw *hw);
+void ngbe_fc_autoneg(struct ngbe_hw *hw);
+s32 ngbe_setup_fc(struct ngbe_hw *hw);
+
+s32 ngbe_validate_mac_addr(u8 *mac_addr);
+s32 ngbe_acquire_swfw_sync(struct ngbe_hw *hw, u32 mask);
+void ngbe_release_swfw_sync(struct ngbe_hw *hw, u32 mask);
+s32 ngbe_disable_pcie_master(struct ngbe_hw *hw);
+
+s32 ngbe_set_vmdq(struct ngbe_hw *hw, u32 rar, u32 vmdq);
+s32 ngbe_set_vmdq_san_mac(struct ngbe_hw *hw, u32 vmdq);
+s32 ngbe_clear_vmdq(struct ngbe_hw *hw, u32 rar, u32 vmdq);
+s32 ngbe_insert_mac_addr(struct ngbe_hw *hw, u8 *addr, u32 vmdq);
+s32 ngbe_init_uta_tables(struct ngbe_hw *hw);
+s32 ngbe_set_vfta(struct ngbe_hw *hw, u32 vlan,
+			 u32 vind, bool vlan_on);
+s32 ngbe_set_vlvf(struct ngbe_hw *hw, u32 vlan, u32 vind,
+			   bool vlan_on, bool *vfta_changed);
+s32 ngbe_clear_vfta(struct ngbe_hw *hw);
+s32 ngbe_find_vlvf_slot(struct ngbe_hw *hw, u32 vlan);
+
+void ngbe_set_mac_anti_spoofing(struct ngbe_hw *hw, bool enable, int pf);
+void ngbe_set_vlan_anti_spoofing(struct ngbe_hw *hw, bool enable, int vf);
+void ngbe_set_ethertype_anti_spoofing(struct ngbe_hw *hw,
+					bool enable, int vf);
+s32 ngbe_get_device_caps(struct ngbe_hw *hw, u16 *device_caps);
+void ngbe_set_rxpba(struct ngbe_hw *hw, int num_pb, u32 headroom,
+			     int strategy);
+s32 ngbe_set_fw_drv_ver(struct ngbe_hw *hw, u8 maj, u8 min,
+				 u8 build, u8 ver);
+s32 ngbe_reset_hostif(struct ngbe_hw *hw);
+u8 ngbe_calculate_checksum(u8 *buffer, u32 length);
+s32 ngbe_host_interface_command(struct ngbe_hw *hw, u32 *buffer,
+				 u32 length, u32 timeout, bool return_data);
+
+void ngbe_clear_tx_pending(struct ngbe_hw *hw);
+void ngbe_stop_mac_link_on_d3(struct ngbe_hw *hw);
+bool ngbe_mng_present(struct ngbe_hw *hw);
+bool ngbe_check_mng_access(struct ngbe_hw *hw);
+
+s32 ngbe_get_thermal_sensor_data(struct ngbe_hw *hw);
+s32 ngbe_init_thermal_sensor_thresh(struct ngbe_hw *hw);
+void ngbe_enable_rx(struct ngbe_hw *hw);
+void ngbe_disable_rx(struct ngbe_hw *hw);
+s32 ngbe_setup_mac_link_multispeed_fiber(struct ngbe_hw *hw,
+					  u32 speed,
+					  bool autoneg_wait_to_complete);
+int ngbe_check_flash_load(struct ngbe_hw *hw, u32 check_bit);
+
+/* @ngbe_api.h */
+void ngbe_atr_compute_perfect_hash(union ngbe_atr_input *input,
+					  union ngbe_atr_input *mask);
+u32 ngbe_atr_compute_sig_hash(union ngbe_atr_hash_dword input,
+				     union ngbe_atr_hash_dword common);
+
+s32 ngbe_get_link_capabilities(struct ngbe_hw *hw,
+				      u32 *speed, bool *autoneg);
+enum ngbe_media_type ngbe_get_media_type(struct ngbe_hw *hw);
+void ngbe_disable_tx_laser_multispeed_fiber(struct ngbe_hw *hw);
+void ngbe_enable_tx_laser_multispeed_fiber(struct ngbe_hw *hw);
+void ngbe_flap_tx_laser_multispeed_fiber(struct ngbe_hw *hw);
+void ngbe_set_hard_rate_select_speed(struct ngbe_hw *hw,
+					u32 speed);
+s32 ngbe_setup_mac_link(struct ngbe_hw *hw, u32 speed,
+						bool autoneg_wait_to_complete);
+void ngbe_init_mac_link_ops(struct ngbe_hw *hw);
+s32 ngbe_reset_hw(struct ngbe_hw *hw);
+s32 ngbe_identify_phy(struct ngbe_hw *hw);
+s32 ngbe_init_ops_common(struct ngbe_hw *hw);
+s32 ngbe_enable_rx_dma(struct ngbe_hw *hw, u32 regval);
+s32 ngbe_init_ops(struct ngbe_hw *hw);
+s32 ngbe_setup_eee(struct ngbe_hw *hw, bool enable_eee);
+
+s32 ngbe_init_flash_params(struct ngbe_hw *hw);
+s32 ngbe_read_flash_buffer(struct ngbe_hw *hw, u32 offset,
+					  u32 dwords, u32 *data);
+s32 ngbe_write_flash_buffer(struct ngbe_hw *hw, u32 offset,
+					  u32 dwords, u32 *data);
+
+s32 ngbe_read_eeprom(struct ngbe_hw *hw,
+				   u16 offset, u16 *data);
+s32 ngbe_read_eeprom_buffer(struct ngbe_hw *hw, u16 offset,
+					  u16 words, u16 *data);
+s32 ngbe_init_eeprom_params(struct ngbe_hw *hw);
+s32 ngbe_update_eeprom_checksum(struct ngbe_hw *hw);
+s32 ngbe_calc_eeprom_checksum(struct ngbe_hw *hw);
+s32 ngbe_validate_eeprom_checksum(struct ngbe_hw *hw,
+					    u16 *checksum_val);
+s32 ngbe_upgrade_flash(struct ngbe_hw *hw, u32 region,
+				const u8 *data, u32 size);
+s32 ngbe_write_ee_hostif_buffer(struct ngbe_hw *hw,
+				u16 offset, u16 words, u16 *data);
+s32 ngbe_write_ee_hostif(struct ngbe_hw *hw, u16 offset,
+				u16 data);
+s32 ngbe_write_ee_hostif32(struct ngbe_hw *hw, u16 offset,
+				u32 data);
+
+s32 ngbe_read_ee_hostif_buffer(struct ngbe_hw *hw,
+				u16 offset, u16 words, u16 *data);
+s32 ngbe_read_ee_hostif(struct ngbe_hw *hw, u16 offset, u16 *data);
+
+s32 ngbe_read_ee_hostif32(struct ngbe_hw *hw, u16 offset, u32 *data);
+
+u32 ngbe_rd32_epcs(struct ngbe_hw *hw, u32 addr);
+void ngbe_wr32_epcs(struct ngbe_hw *hw, u32 addr, u32 data);
+void ngbe_wr32_ephy(struct ngbe_hw *hw, u32 addr, u32 data);
+s32 ngbe_upgrade_flash_hostif(struct ngbe_hw *hw,  u32 region,
+				const u8 *data, u32 size);
+
+s32 ngbe_check_mac_link_zte(struct ngbe_hw *hw,
+							u32 *speed,
+							bool *link_up,
+							bool link_up_wait_to_complete);
+
+s32 ngbe_eepromcheck_cap(struct ngbe_hw *hw, u16 offset,
+							   u32 *data);
+s32 ngbe_phy_signal_set(struct ngbe_hw *hw);
+
+#endif /* _NGBE_HW_H_ */
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_lib.c b/drivers/net/ethernet/netswift/ngbe/ngbe_lib.c
new file mode 100644
index 0000000000000..200fc34e9fa89
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_lib.c
@@ -0,0 +1,701 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+#include "ngbe.h"
+#include "ngbe_sriov.h"
+
+/**
+ * ngbe_cache_ring_vmdq - Descriptor ring to register mapping for VMDq
+ * @adapter: board private structure to initialize
+ *
+ * Cache the descriptor ring offsets for VMDq to the assigned rings.  It
+ * will also try to cache the proper offsets if RSS/FCoE/SRIOV are enabled along
+ * with VMDq.
+ *
+ **/
+static bool ngbe_cache_ring_vmdq(struct ngbe_adapter *adapter)
+{
+	struct ngbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
+	int i;
+	u16 reg_idx;
+
+	/* only proceed if VMDq is enabled */
+	if (!(adapter->flags & NGBE_FLAG_VMDQ_ENABLED))
+		return false;
+
+	/* start at VMDq register offset for SR-IOV enabled setups */
+	reg_idx = vmdq->offset;
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+
+		/* If we are greater than indices move to next pool */
+		adapter->rx_ring[i]->reg_idx = reg_idx + i;
+	}
+
+	reg_idx = vmdq->offset;
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+
+		/* If we are greater than indices move to next pool */
+		adapter->tx_ring[i]->reg_idx = reg_idx + i;
+	}
+
+	return true;
+}
+
+/**
+ * ngbe_cache_ring_rss - Descriptor ring to register mapping for RSS
+ * @adapter: board private structure to initialize
+ *
+ * Cache the descriptor ring offsets for RSS, ATR, FCoE, and SR-IOV.
+ *
+ **/
+static bool ngbe_cache_ring_rss(struct ngbe_adapter *adapter)
+{
+	u16 i;
+
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		adapter->rx_ring[i]->reg_idx = i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		adapter->tx_ring[i]->reg_idx = i;
+
+	return true;
+}
+
+/**
+ * ngbe_cache_ring_register - Descriptor ring to register mapping
+ * @adapter: board private structure to initialize
+ *
+ * Once we know the feature-set enabled for the device, we'll cache
+ * the register offset the descriptor ring is assigned to.
+ *
+ * Note, the order the various feature calls is important.  It must start with
+ * the "most" features enabled at the same time, then trickle down to the
+ * least amount of features turned on at once.
+ **/
+static void ngbe_cache_ring_register(struct ngbe_adapter *adapter)
+{
+	if (ngbe_cache_ring_vmdq(adapter))
+		return;
+
+	ngbe_cache_ring_rss(adapter);
+}
+
+#define NGBE_RSS_64Q_MASK      0x3F
+#define NGBE_RSS_16Q_MASK      0xF
+#define NGBE_RSS_8Q_MASK       0x7
+#define NGBE_RSS_4Q_MASK       0x3
+#define NGBE_RSS_2Q_MASK       0x1
+#define NGBE_RSS_DISABLED_MASK 0x0
+
+/**
+ * ngbe_set_vmdq_queues: Allocate queues for VMDq devices
+ * @adapter: board private structure to initialize
+ *
+ * When VMDq (Virtual Machine Devices queue) is enabled, allocate queues
+ * and VM pools where appropriate.  If RSS is available, then also try and
+ * enable RSS and map accordingly.
+ *
+ **/
+static bool ngbe_set_vmdq_queues(struct ngbe_adapter *adapter)
+{
+	u16 vmdq_i = adapter->ring_feature[RING_F_VMDQ].limit;
+	u16 vmdq_m = 0;
+	u16 rss_i = adapter->ring_feature[RING_F_RSS].limit;
+	u16 rss_m = NGBE_RSS_DISABLED_MASK;
+
+	/* only proceed if VMDq is enabled */
+	if (!(adapter->flags & NGBE_FLAG_VMDQ_ENABLED))
+		return false;
+
+	/* Add starting offset to total pool count */
+	vmdq_i += adapter->ring_feature[RING_F_VMDQ].offset;
+
+	/* double check we are limited to maximum pools */
+	vmdq_i = min_t(u16, NGBE_MAX_VMDQ_INDICES, vmdq_i);
+
+	/* when VMDQ on, disable RSS */
+	rss_i = 1;
+
+	/* remove the starting offset from the pool count */
+	vmdq_i -= adapter->ring_feature[RING_F_VMDQ].offset;
+
+	/* save features for later use */
+	adapter->ring_feature[RING_F_VMDQ].indices = vmdq_i;
+	adapter->ring_feature[RING_F_VMDQ].mask = vmdq_m;
+
+	/* limit RSS based on user input and save for later use */
+	adapter->ring_feature[RING_F_RSS].indices = rss_i;
+	adapter->ring_feature[RING_F_RSS].mask = rss_m;
+
+	adapter->queues_per_pool = rss_i;
+	adapter->num_rx_queues = vmdq_i * rss_i;
+	adapter->num_tx_queues = vmdq_i * rss_i;
+
+	return true;
+}
+
+/**
+ * ngbe_set_rss_queues: Allocate queues for RSS
+ * @adapter: board private structure to initialize
+ *
+ * This is our "base" multiqueue mode.  RSS (Receive Side Scaling) will try
+ * to allocate one Rx queue per CPU, and if available, one Tx queue per CPU.
+ *
+ **/
+static bool ngbe_set_rss_queues(struct ngbe_adapter *adapter)
+{
+	struct ngbe_ring_feature *f;
+	u16 rss_i;
+
+	/* set mask for 16 queue limit of RSS */
+	f = &adapter->ring_feature[RING_F_RSS];
+	rss_i = f->limit;
+
+	f->indices = rss_i;
+	f->mask = NGBE_RSS_8Q_MASK;
+
+	adapter->num_rx_queues = rss_i;
+	adapter->num_tx_queues = rss_i;
+
+	return true;
+}
+
+/*
+ * ngbe_set_num_queues: Allocate queues for device, feature dependent
+ * @adapter: board private structure to initialize
+ *
+ * This is the top level queue allocation routine.  The order here is very
+ * important, starting with the "most" number of features turned on at once,
+ * and ending with the smallest set of features.  This way large combinations
+ * can be allocated if they're turned on, and smaller combinations are the
+ * fallthrough conditions.
+ *
+ **/
+static void ngbe_set_num_queues(struct ngbe_adapter *adapter)
+{
+	/* Start with base case */
+	adapter->num_rx_queues = 1;
+	adapter->num_tx_queues = 1;
+	adapter->queues_per_pool = 1;
+
+	if (ngbe_set_vmdq_queues(adapter))
+		return;
+
+	ngbe_set_rss_queues(adapter);
+
+}
+
+/**
+ * ngbe_acquire_msix_vectors - acquire MSI-X vectors
+ * @adapter: board private structure
+ *
+ * Attempts to acquire a suitable range of MSI-X vector interrupts. Will
+ * return a negative error code if unable to acquire MSI-X vectors for any
+ * reason.
+ */
+static int ngbe_acquire_msix_vectors(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	int i, vectors, vector_threshold;
+
+	if (!(adapter->flags & NGBE_FLAG_MSIX_CAPABLE))
+		return -EOPNOTSUPP;
+
+	/* We start by asking for one vector per queue pair */
+	vectors = max(adapter->num_rx_queues, adapter->num_tx_queues);
+
+	/* It is easy to be greedy for MSI-X vectors. However, it really
+	 * doesn't do much good if we have a lot more vectors than CPUs. We'll
+	 * be somewhat conservative and only ask for (roughly) the same number
+	 * of vectors as there are CPUs.
+	 */
+	vectors = min_t(int, vectors, num_online_cpus());
+
+	/* Some vectors are necessary for non-queue interrupts */
+	vectors += NON_Q_VECTORS;
+
+	/* Hardware can only support a maximum of hw.mac->max_msix_vectors.
+	 * With features such as RSS and VMDq, we can easily surpass the
+	 * number of Rx and Tx descriptor queues supported by our device.
+	 * Thus, we cap the maximum in the rare cases where the CPU count also
+	 * exceeds our vector limit
+	 */
+	vectors = min_t(int, vectors, hw->mac.max_msix_vectors);
+
+	/* We want a minimum of two MSI-X vectors for (1) a TxQ[0] + RxQ[0]
+	 * handler, and (2) an Other (Link Status Change, etc.) handler.
+	 */
+	vector_threshold = MIN_MSIX_COUNT;
+
+	/* we need to alloc (7vfs+1pf+1misc) or (8vfs+1misc) msix entries */
+	if (adapter->flags2 & NGBE_FLAG2_SRIOV_MISC_IRQ_REMAP) {
+		vectors += adapter->ring_feature[RING_F_VMDQ].offset;
+	}
+
+	adapter->msix_entries = kcalloc(vectors,
+					sizeof(struct msix_entry),
+					GFP_KERNEL);
+	if (!adapter->msix_entries)
+		return -ENOMEM;
+
+	for (i = 0; i < vectors; i++)
+		adapter->msix_entries[i].entry = i;
+
+	vectors = pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
+					vector_threshold, vectors);
+	if (vectors < 0) {
+		/* A negative count of allocated vectors indicates an error in
+		 * acquiring within the specified range of MSI-X vectors */
+		e_dev_warn("Failed to allocate MSI-X interrupts. Err: %d\n",
+			   vectors);
+
+		adapter->flags &= ~NGBE_FLAG_MSIX_ENABLED;
+		kfree(adapter->msix_entries);
+		adapter->msix_entries = NULL;
+
+		return vectors;
+	}
+
+	if (adapter->flags2 & NGBE_FLAG2_SRIOV_MISC_IRQ_REMAP) {
+		if (vectors < 9) {
+			adapter->flags2 &= ~NGBE_FLAG2_SRIOV_MISC_IRQ_REMAP;
+			e_dev_warn("Remain available irqs < 9. Disable MISC IRQ REMAP.\n");
+		} else
+			vectors -= adapter->ring_feature[RING_F_VMDQ].offset;
+	}
+
+	/* we successfully allocated some number of vectors within our
+	 * requested range.
+	 */
+	adapter->flags |= NGBE_FLAG_MSIX_ENABLED;
+
+	/* Adjust for only the vectors we'll use, which is minimum
+	 * of max_q_vectors, or the number of vectors we were allocated.
+	 */
+	vectors -= NON_Q_VECTORS;
+	adapter->num_q_vectors = min_t(int, vectors, adapter->max_q_vectors);
+
+	return 0;
+}
+
+static void ngbe_add_ring(struct ngbe_ring *ring,
+			   struct ngbe_ring_container *head)
+{
+	ring->next = head->ring;
+	head->ring = ring;
+	head->count++;
+}
+
+/**
+ * ngbe_alloc_q_vector - Allocate memory for a single interrupt vector
+ * @adapter: board private structure to initialize
+ * @v_count: q_vectors allocated on adapter, used for ring interleaving
+ * @v_idx: index of vector in adapter struct
+ * @txr_count: total number of Tx rings to allocate
+ * @txr_idx: index of first Tx ring to allocate
+ * @rxr_count: total number of Rx rings to allocate
+ * @rxr_idx: index of first Rx ring to allocate
+ *
+ * We allocate one q_vector.  If allocation fails we return -ENOMEM.
+ **/
+static int ngbe_alloc_q_vector(struct ngbe_adapter *adapter,
+				unsigned int v_count, unsigned int v_idx,
+				unsigned int txr_count, unsigned int txr_idx,
+				unsigned int rxr_count, unsigned int rxr_idx)
+{
+	struct ngbe_q_vector *q_vector;
+	struct ngbe_ring *ring;
+	int node = -1;
+	int cpu = -1;
+	u8 tcs = netdev_get_num_tc(adapter->netdev);
+
+	int ring_count, size;
+
+	/* note this will allocate space for the ring structure as well! */
+	ring_count = txr_count + rxr_count;
+	size = sizeof(struct ngbe_q_vector) +
+	       (sizeof(struct ngbe_ring) * ring_count);
+
+	/* customize cpu for Flow Director mapping */
+	if ((tcs <= 1) && !(adapter->flags & NGBE_FLAG_VMDQ_ENABLED)) {
+		u16 rss_i = adapter->ring_feature[RING_F_RSS].indices;
+		if (rss_i > 1 && adapter->atr_sample_rate) {
+			if (cpu_online(v_idx)) {
+				cpu = v_idx;
+				node = cpu_to_node(cpu);
+			}
+		}
+	}
+
+	/* allocate q_vector and rings */
+	q_vector = kzalloc_node(size, GFP_KERNEL, node);
+	if (!q_vector)
+		q_vector = kzalloc(size, GFP_KERNEL);
+	if (!q_vector)
+		return -ENOMEM;
+
+	/* setup affinity mask and node */
+	if (cpu != -1)
+		cpumask_set_cpu(cpu, &q_vector->affinity_mask);
+	q_vector->numa_node = node;
+
+	/* initialize CPU for DCA */
+	q_vector->cpu = -1;
+
+	/* initialize NAPI */
+	netif_napi_add(adapter->netdev, &q_vector->napi,
+					ngbe_poll, 64);
+
+	/* tie q_vector and adapter together */
+	adapter->q_vector[v_idx] = q_vector;
+	q_vector->adapter = adapter;
+	q_vector->v_idx = v_idx;
+
+	/* initialize work limits */
+	q_vector->tx.work_limit = adapter->tx_work_limit;
+	q_vector->rx.work_limit = adapter->rx_work_limit;
+
+	/* initialize pointer to rings */
+	ring = q_vector->ring;
+
+	/* intialize ITR */
+	if (txr_count && !rxr_count) {
+		/* tx only vector */
+		if (adapter->tx_itr_setting == 1)
+			q_vector->itr = NGBE_7K_ITR;
+		else
+			q_vector->itr = adapter->tx_itr_setting;
+	} else {
+		/* rx or rx/tx vector */
+		if (adapter->rx_itr_setting == 1)
+			q_vector->itr = NGBE_7K_ITR;
+		else
+			q_vector->itr = adapter->rx_itr_setting;
+	}
+
+	while (txr_count) {
+		/* assign generic ring traits */
+		ring->dev = pci_dev_to_dev(adapter->pdev);
+		ring->netdev = adapter->netdev;
+
+		/* configure backlink on ring */
+		ring->q_vector = q_vector;
+
+		/* update q_vector Tx values */
+		ngbe_add_ring(ring, &q_vector->tx);
+
+		/* apply Tx specific ring traits */
+		ring->count = adapter->tx_ring_count;
+		if (adapter->num_vmdqs > 1)
+			ring->queue_index =
+				txr_idx % adapter->queues_per_pool;
+		else
+			ring->queue_index = txr_idx;
+
+		/* assign ring to adapter */
+		adapter->tx_ring[txr_idx] = ring;
+
+		/* update count and index */
+		txr_count--;
+		txr_idx += v_count;
+
+		/* push pointer to next ring */
+		ring++;
+	}
+
+	while (rxr_count) {
+		/* assign generic ring traits */
+		ring->dev = pci_dev_to_dev(adapter->pdev);
+		ring->netdev = adapter->netdev;
+
+		/* configure backlink on ring */
+		ring->q_vector = q_vector;
+
+		/* update q_vector Rx values */
+		ngbe_add_ring(ring, &q_vector->rx);
+
+		/* apply Rx specific ring traits */
+		ring->count = adapter->rx_ring_count;
+		if (adapter->num_vmdqs > 1)
+			ring->queue_index =
+				rxr_idx % adapter->queues_per_pool;
+		else
+			ring->queue_index = rxr_idx;
+
+		/* assign ring to adapter */
+		adapter->rx_ring[rxr_idx] = ring;
+
+		/* update count and index */
+		rxr_count--;
+		rxr_idx += v_count;
+
+		/* push pointer to next ring */
+		ring++;
+	}
+
+	return 0;
+}
+
+/**
+ * ngbe_free_q_vector - Free memory allocated for specific interrupt vector
+ * @adapter: board private structure to initialize
+ * @v_idx: Index of vector to be freed
+ *
+ * This function frees the memory allocated to the q_vector.  In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ **/
+static void ngbe_free_q_vector(struct ngbe_adapter *adapter, int v_idx)
+{
+	struct ngbe_q_vector *q_vector = adapter->q_vector[v_idx];
+	struct ngbe_ring *ring;
+
+	ngbe_for_each_ring(ring, q_vector->tx)
+		adapter->tx_ring[ring->queue_index] = NULL;
+
+	ngbe_for_each_ring(ring, q_vector->rx)
+		adapter->rx_ring[ring->queue_index] = NULL;
+
+	adapter->q_vector[v_idx] = NULL;
+	netif_napi_del(&q_vector->napi);
+	kfree_rcu(q_vector, rcu);
+}
+
+/**
+ * ngbe_alloc_q_vectors - Allocate memory for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one q_vector per queue interrupt.  If allocation fails we
+ * return -ENOMEM.
+ **/
+static int ngbe_alloc_q_vectors(struct ngbe_adapter *adapter)
+{
+	unsigned int q_vectors = adapter->num_q_vectors;
+	unsigned int rxr_remaining = adapter->num_rx_queues;
+	unsigned int txr_remaining = adapter->num_tx_queues;
+	unsigned int rxr_idx = 0, txr_idx = 0, v_idx = 0;
+	int err;
+
+	if (q_vectors >= (rxr_remaining + txr_remaining)) {
+		for (; rxr_remaining; v_idx++) {
+			err = ngbe_alloc_q_vector(adapter, q_vectors, v_idx,
+						   0, 0, 1, rxr_idx);
+			if (err)
+				goto err_out;
+
+			/* update counts and index */
+			rxr_remaining--;
+			rxr_idx++;
+		}
+	}
+
+	for (; v_idx < q_vectors; v_idx++) {
+		int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx);
+		int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx);
+		err = ngbe_alloc_q_vector(adapter, q_vectors, v_idx,
+					   tqpv, txr_idx,
+					   rqpv, rxr_idx);
+
+		if (err)
+			goto err_out;
+
+		/* update counts and index */
+		rxr_remaining -= rqpv;
+		txr_remaining -= tqpv;
+		rxr_idx++;
+		txr_idx++;
+	}
+
+	return 0;
+
+err_out:
+	adapter->num_tx_queues = 0;
+	adapter->num_rx_queues = 0;
+	adapter->num_q_vectors = 0;
+
+	while (v_idx--)
+		ngbe_free_q_vector(adapter, v_idx);
+
+	return -ENOMEM;
+}
+
+/**
+ * ngbe_free_q_vectors - Free memory allocated for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function frees the memory allocated to the q_vectors.  In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ **/
+static void ngbe_free_q_vectors(struct ngbe_adapter *adapter)
+{
+	int v_idx = adapter->num_q_vectors;
+
+	adapter->num_tx_queues = 0;
+	adapter->num_rx_queues = 0;
+	adapter->num_q_vectors = 0;
+
+	while (v_idx--)
+		ngbe_free_q_vector(adapter, v_idx);
+}
+
+void ngbe_reset_interrupt_capability(struct ngbe_adapter *adapter)
+{
+	if (adapter->flags & NGBE_FLAG_MSIX_ENABLED) {
+		adapter->flags &= ~NGBE_FLAG_MSIX_ENABLED;
+		pci_disable_msix(adapter->pdev);
+		kfree(adapter->msix_entries);
+		adapter->msix_entries = NULL;
+	} else if (adapter->flags & NGBE_FLAG_MSI_ENABLED) {
+		adapter->flags &= ~NGBE_FLAG_MSI_ENABLED;
+		pci_disable_msi(adapter->pdev);
+	}
+}
+
+/**
+ * ngbe_set_interrupt_capability - set MSI-X or MSI if supported
+ * @adapter: board private structure to initialize
+ *
+ * Attempt to configure the interrupts using the best available
+ * capabilities of the hardware and the kernel.
+ **/
+void ngbe_set_interrupt_capability(struct ngbe_adapter *adapter)
+{
+	int err;
+
+	/* We will try to get MSI-X interrupts first */
+	if (!ngbe_acquire_msix_vectors(adapter))
+		return;
+
+	/* At this point, we do not have MSI-X capabilities. We need to
+	 * reconfigure or disable various features which require MSI-X
+	 * capability.
+	 */
+	/* Disable VMDq support */
+	e_dev_warn("Disabling VMQd support\n");
+	adapter->flags &= ~NGBE_FLAG_VMDQ_ENABLED;
+
+#ifdef CONFIG_PCI_IOV
+	/* Disable SR-IOV support */
+	e_dev_warn("Disabling SR-IOV support\n");
+	ngbe_disable_sriov(adapter);
+	if (adapter->flags2 & NGBE_FLAG2_SRIOV_MISC_IRQ_REMAP)
+		adapter->flags2 &= ~NGBE_FLAG2_SRIOV_MISC_IRQ_REMAP;
+#endif /* CONFIG_PCI_IOV */
+
+	/* Disable RSS */
+	e_dev_warn("Disabling RSS support\n");
+	adapter->ring_feature[RING_F_RSS].limit = 1;
+
+	/* recalculate number of queues now that many features have been
+	 * changed or disabled.
+	 */
+	ngbe_set_num_queues(adapter);
+	adapter->num_q_vectors = 1;
+
+	if (!(adapter->flags & NGBE_FLAG_MSI_CAPABLE))
+		return;
+
+	err = pci_enable_msi(adapter->pdev);
+	if (err)
+		e_dev_warn("Failed to allocate MSI interrupt, falling back to "
+		"legacy. Error: %d\n",
+			   err);
+	else
+		adapter->flags |= NGBE_FLAG_MSI_ENABLED;
+}
+
+/**
+ * ngbe_init_interrupt_scheme - Determine proper interrupt scheme
+ * @adapter: board private structure to initialize
+ *
+ * We determine which interrupt scheme to use based on...
+ * - Kernel support (MSI, MSI-X)
+ *   - which can be user-defined (via MODULE_PARAM)
+ * - Hardware queue count (num_*_queues)
+ *   - defined by miscellaneous hardware support/features (RSS, etc.)
+ **/
+int ngbe_init_interrupt_scheme(struct ngbe_adapter *adapter)
+{
+	int err;
+
+	/* if assigned vfs >= 7, the PF queue irq remain seq 0 and misc irq move from
+	 * seq 1 to seq 8. it needs extra processions.
+	 */
+	if (adapter->num_vfs >= NGBE_MAX_VF_FUNCTIONS - 1) {
+		adapter->flags2 |= NGBE_FLAG2_SRIOV_MISC_IRQ_REMAP;
+	}
+
+	/* Number of supported queues */
+	ngbe_set_num_queues(adapter);
+
+	/* Set interrupt mode */
+	ngbe_set_interrupt_capability(adapter);
+
+	/* Allocate memory for queues */
+	err = ngbe_alloc_q_vectors(adapter);
+	if (err) {
+		e_err(probe, "Unable to allocate memory for queue vectors\n");
+		ngbe_reset_interrupt_capability(adapter);
+		return err;
+	}
+
+	ngbe_cache_ring_register(adapter);
+
+	set_bit(__NGBE_DOWN, &adapter->state);
+
+	return 0;
+}
+
+/**
+ * ngbe_clear_interrupt_scheme - Clear the current interrupt scheme settings
+ * @adapter: board private structure to clear interrupt scheme on
+ *
+ * We go through and clear interrupt specific resources and reset the structure
+ * to pre-load conditions
+ **/
+void ngbe_clear_interrupt_scheme(struct ngbe_adapter *adapter)
+{
+	ngbe_free_q_vectors(adapter);
+	ngbe_reset_interrupt_capability(adapter);
+
+	/* remove this flags */
+	if (adapter->flags2 & NGBE_FLAG2_SRIOV_MISC_IRQ_REMAP) {
+		adapter->flags2 &= ~NGBE_FLAG2_SRIOV_MISC_IRQ_REMAP;
+	}
+}
+
+void ngbe_tx_ctxtdesc(struct ngbe_ring *tx_ring, u32 vlan_macip_lens,
+		       u32 fcoe_sof_eof, u32 type_tucmd, u32 mss_l4len_idx)
+{
+	struct ngbe_tx_context_desc *context_desc;
+	u16 i = tx_ring->next_to_use;
+
+	context_desc = NGBE_TX_CTXTDESC(tx_ring, i);
+
+	i++;
+	tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
+
+	/* set bits to identify this as an advanced context descriptor */
+	type_tucmd |= NGBE_TXD_DTYP_CTXT;
+	context_desc->vlan_macip_lens   = cpu_to_le32(vlan_macip_lens);
+	context_desc->seqnum_seed       = cpu_to_le32(fcoe_sof_eof);
+	context_desc->type_tucmd_mlhl   = cpu_to_le32(type_tucmd);
+	context_desc->mss_l4len_idx     = cpu_to_le32(mss_l4len_idx);
+}
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_main.c b/drivers/net/ethernet/netswift/ngbe/ngbe_main.c
new file mode 100644
index 0000000000000..9a3f4450d38e9
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_main.c
@@ -0,0 +1,7119 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/highmem.h>
+#include <linux/string.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/pkt_sched.h>
+#include <linux/ipv6.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <linux/if_macvlan.h>
+#include <linux/ethtool.h>
+#include <linux/if_bridge.h>
+#include <net/vxlan.h>
+
+#include "ngbe.h"
+#include "ngbe_sriov.h"
+#include "ngbe_hw.h"
+#include "ngbe_phy.h"
+#include "ngbe_pcierr.h"
+
+char ngbe_driver_name[32] = NGBE_NAME;
+static const char ngbe_driver_string[] =
+			"WangXun Gigabit PCI Express Network Driver";
+
+#define DRV_VERSION     __stringify(1.1.0oe)
+
+const char ngbe_driver_version[32] = DRV_VERSION;
+static const char ngbe_copyright[] =
+		"Copyright (c) 2018 -2019 Beijing WangXun Technology Co., Ltd";
+static const char ngbe_overheat_msg[] =
+		"Network adapter has been stopped because it has over heated. "
+		"If the problem persists, restart the computer, or "
+		"power off the system and replace the adapter";
+static const char ngbe_underheat_msg[] =
+		"Network adapter has been started again since the temperature "
+		"has been back to normal state";
+
+/* ngbe_pci_tbl - PCI Device ID Table
+ *
+ * Wildcard entries (PCI_ANY_ID) should come last
+ * Last entry must be all 0s
+ *
+ * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
+ *   Class, Class Mask, private data (not used) }
+ */
+static const struct pci_device_id ngbe_pci_tbl[] = {
+	{ PCI_VDEVICE(TRUSTNETIC, NGBE_DEV_ID_EM_TEST), 0},
+	{ PCI_VDEVICE(TRUSTNETIC, NGBE_DEV_ID_EM_WX1860A2), 0},
+	{ PCI_VDEVICE(TRUSTNETIC, NGBE_DEV_ID_EM_WX1860A2S), 0},
+	{ PCI_VDEVICE(TRUSTNETIC, NGBE_DEV_ID_EM_WX1860A4), 0},
+	{ PCI_VDEVICE(TRUSTNETIC, NGBE_DEV_ID_EM_WX1860A4S), 0},
+	{ PCI_VDEVICE(TRUSTNETIC, NGBE_DEV_ID_EM_WX1860AL2), 0},
+	{ PCI_VDEVICE(TRUSTNETIC, NGBE_DEV_ID_EM_WX1860AL2S), 0},
+	{ PCI_VDEVICE(TRUSTNETIC, NGBE_DEV_ID_EM_WX1860AL4), 0},
+	{ PCI_VDEVICE(TRUSTNETIC, NGBE_DEV_ID_EM_WX1860AL4S), 0},
+	{ PCI_VDEVICE(TRUSTNETIC, NGBE_DEV_ID_EM_WX1860AL_W), 0},
+	{ PCI_VDEVICE(TRUSTNETIC, NGBE_DEV_ID_EM_WX1860NCSI), 0},
+	{ PCI_VDEVICE(TRUSTNETIC, NGBE_DEV_ID_EM_WX1860AL1), 0},
+	{ PCI_VDEVICE(TRUSTNETIC, NGBE_DEV_ID_EM_WX1860A1), 0},
+	{ PCI_VDEVICE(TRUSTNETIC, 0x10c), 0},
+	/* required last entry */
+	{ .device = 0 }
+};
+MODULE_DEVICE_TABLE(pci, ngbe_pci_tbl);
+
+MODULE_AUTHOR("Beijing WangXun Technology Co., Ltd, linux.nic@trustnetic.com");
+MODULE_DESCRIPTION("WangXun(R) Gigabit PCI Express Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+#define DEFAULT_DEBUG_LEVEL_SHIFT 3
+
+static struct workqueue_struct *ngbe_wq;
+
+static bool ngbe_check_cfg_remove(struct ngbe_hw *hw, struct pci_dev *pdev);
+static void ngbe_clean_rx_ring(struct ngbe_ring *rx_ring);
+static void ngbe_clean_tx_ring(struct ngbe_ring *tx_ring);
+
+extern ngbe_dptype ngbe_ptype_lookup[256];
+
+static inline ngbe_dptype ngbe_decode_ptype(const u8 ptype)
+{
+	return ngbe_ptype_lookup[ptype];
+}
+
+static inline ngbe_dptype
+decode_rx_desc_ptype(const union ngbe_rx_desc *rx_desc)
+{
+	return ngbe_decode_ptype(NGBE_RXD_PKTTYPE(rx_desc));
+}
+
+static void ngbe_check_minimum_link(struct ngbe_adapter *adapter,
+									int expected_gts)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	struct pci_dev *pdev;
+
+	/* Some devices are not connected over PCIe and thus do not negotiate
+	 * speed. These devices do not have valid bus info, and thus any report
+	 * we generate may not be correct.
+	 */
+	if (hw->bus.type == ngbe_bus_type_internal)
+		return;
+
+	pdev = adapter->pdev;
+
+	pcie_print_link_status(pdev);
+}
+
+/**
+ * ngbe_enumerate_functions - Get the number of ports this device has
+ * @adapter: adapter structure
+ *
+ * This function enumerates the phsyical functions co-located on a single slot,
+ * in order to determine how many ports a device has. This is most useful in
+ * determining the required GT/s of PCIe bandwidth necessary for optimal
+ * performance.
+ **/
+static inline int ngbe_enumerate_functions(struct ngbe_adapter *adapter)
+{
+	struct pci_dev *entry, *pdev = adapter->pdev;
+	int physfns = 0;
+
+	list_for_each_entry(entry, &pdev->bus->devices, bus_list) {
+#ifdef CONFIG_PCI_IOV
+		/* don't count virtual functions */
+		if (entry->is_virtfn)
+			continue;
+#endif
+
+		/* When the devices on the bus don't all match our device ID,
+		 * we can't reliably determine the correct number of
+		 * functions. This can occur if a function has been direct
+		 * attached to a virtual machine using VT-d, for example. In
+		 * this case, simply return -1 to indicate this.
+		 */
+		if ((entry->vendor != pdev->vendor) ||
+			(entry->device != pdev->device))
+			return -1;
+
+		physfns++;
+	}
+
+	return physfns;
+}
+
+void ngbe_service_event_schedule(struct ngbe_adapter *adapter)
+{
+	if (!test_bit(__NGBE_DOWN, &adapter->state) &&
+	    !test_bit(__NGBE_REMOVING, &adapter->state) &&
+	    !test_and_set_bit(__NGBE_SERVICE_SCHED, &adapter->state))
+		queue_work(ngbe_wq, &adapter->service_task);
+}
+
+static void ngbe_service_event_complete(struct ngbe_adapter *adapter)
+{
+	BUG_ON(!test_bit(__NGBE_SERVICE_SCHED, &adapter->state));
+
+	/* flush memory to make sure state is correct before next watchdog */
+	smp_mb__before_atomic();
+	clear_bit(__NGBE_SERVICE_SCHED, &adapter->state);
+}
+
+static void ngbe_remove_adapter(struct ngbe_hw *hw)
+{
+	struct ngbe_adapter *adapter = hw->back;
+
+	if (!hw->hw_addr)
+		return;
+	hw->hw_addr = NULL;
+	e_dev_err("Adapter removed\n");
+	if (test_bit(__NGBE_SERVICE_INITED, &adapter->state))
+		ngbe_service_event_schedule(adapter);
+}
+
+static void ngbe_check_remove(struct ngbe_hw *hw, u32 reg)
+{
+	u32 value;
+
+	/* The following check not only optimizes a bit by not
+	 * performing a read on the status register when the
+	 * register just read was a status register read that
+	 * returned NGBE_FAILED_READ_REG. It also blocks any
+	 * potential recursion.
+	 */
+	if (reg == NGBE_CFG_PORT_ST) {
+		ngbe_remove_adapter(hw);
+		return;
+	}
+	value = rd32(hw, NGBE_CFG_PORT_ST);
+	if (value == NGBE_FAILED_READ_REG)
+		ngbe_remove_adapter(hw);
+}
+
+static u32 ngbe_validate_register_read(struct ngbe_hw *hw, u32 reg, bool quiet)
+{
+	int i;
+	u32 value;
+	u8 __iomem *reg_addr;
+	struct ngbe_adapter *adapter = hw->back;
+
+	reg_addr = READ_ONCE(hw->hw_addr);
+	if (NGBE_REMOVED(reg_addr))
+		return NGBE_FAILED_READ_REG;
+	for (i = 0; i < NGBE_DEAD_READ_RETRIES; ++i) {
+		value = ngbe_rd32(reg_addr + reg);
+		if (value != NGBE_DEAD_READ_REG)
+			break;
+	}
+	if (quiet)
+		return value;
+	if (value == NGBE_DEAD_READ_REG)
+		e_err(drv, "%s: register %x read unchanged\n", __func__, reg);
+	else
+		e_warn(hw, "%s: register %x read recovered after %d retries\n",
+			__func__, reg, i + 1);
+	return value;
+}
+
+/**
+ * ngbe_read_reg - Read from device register
+ * @hw: hw specific details
+ * @reg: offset of register to read
+ *
+ * Returns : value read or NGBE_FAILED_READ_REG if removed
+ *
+ * This function is used to read device registers. It checks for device
+ * removal by confirming any read that returns all ones by checking the
+ * status register value for all ones. This function avoids reading from
+ * the hardware if a removal was previously detected in which case it
+ * returns NGBE_FAILED_READ_REG (all ones).
+ */
+u32 ngbe_read_reg(struct ngbe_hw *hw, u32 reg, bool quiet)
+{
+	u32 value;
+	u8 __iomem *reg_addr;
+
+	reg_addr = READ_ONCE(hw->hw_addr);
+	if (NGBE_REMOVED(reg_addr))
+		return NGBE_FAILED_READ_REG;
+	value = ngbe_rd32(reg_addr + reg);
+	if (unlikely(value == NGBE_FAILED_READ_REG))
+		ngbe_check_remove(hw, reg);
+	if (unlikely(value == NGBE_DEAD_READ_REG))
+		value = ngbe_validate_register_read(hw, reg, quiet);
+	return value;
+}
+
+static void ngbe_release_hw_control(struct ngbe_adapter *adapter)
+{
+	/* Let firmware take over control of h/w */
+	wr32m(&adapter->hw, NGBE_CFG_PORT_CTL,
+		NGBE_CFG_PORT_CTL_DRV_LOAD, 0);
+}
+
+static void ngbe_get_hw_control(struct ngbe_adapter *adapter)
+{
+	/* Let firmware know the driver has taken over */
+	wr32m(&adapter->hw, NGBE_CFG_PORT_CTL,
+		NGBE_CFG_PORT_CTL_DRV_LOAD, NGBE_CFG_PORT_CTL_DRV_LOAD);
+}
+
+/**
+ * ngbe_set_ivar - set the IVAR registers, mapping interrupt causes to vectors
+ * @adapter: pointer to adapter struct
+ * @direction: 0 for Rx, 1 for Tx, -1 for other causes
+ * @queue: queue to map the corresponding interrupt to
+ * @msix_vector: the vector to map to the corresponding queue
+ *
+ **/
+static void ngbe_set_ivar(struct ngbe_adapter *adapter, s8 direction,
+						  u16 queue, u16 msix_vector)
+{
+	u32 ivar, index;
+	struct ngbe_hw *hw = &adapter->hw;
+
+	if (direction == -1) {
+		/* other causes */
+		msix_vector |= NGBE_PX_IVAR_ALLOC_VAL;
+		index = 0;
+		ivar = rd32(&adapter->hw, NGBE_PX_MISC_IVAR);
+		ivar &= ~(0xFF << index);
+		ivar |= (msix_vector << index);
+		/* if assigned VFs >= 7, the pf misc irq shall be remapped to 0x88. */
+		if (adapter->flags2 & NGBE_FLAG2_SRIOV_MISC_IRQ_REMAP)
+			ivar = msix_vector;
+		wr32(&adapter->hw, NGBE_PX_MISC_IVAR, ivar);
+	} else {
+		/* tx or rx causes */
+		msix_vector |= NGBE_PX_IVAR_ALLOC_VAL;
+		index = ((16 * (queue & 1)) + (8 * direction));
+		ivar = rd32(hw, NGBE_PX_IVAR(queue >> 1));
+		ivar &= ~(0xFF << index);
+		ivar |= (msix_vector << index);
+		wr32(hw, NGBE_PX_IVAR(queue >> 1), ivar);
+	}
+}
+
+void ngbe_unmap_and_free_tx_resource(struct ngbe_ring *ring,
+									 struct ngbe_tx_buffer *tx_buffer)
+{
+	if (tx_buffer->skb) {
+		dev_kfree_skb_any(tx_buffer->skb);
+		if (dma_unmap_len(tx_buffer, len))
+			dma_unmap_single(ring->dev,
+					 dma_unmap_addr(tx_buffer, dma),
+					 dma_unmap_len(tx_buffer, len),
+					 DMA_TO_DEVICE);
+	} else if (dma_unmap_len(tx_buffer, len)) {
+		dma_unmap_page(ring->dev,
+						dma_unmap_addr(tx_buffer, dma),
+						dma_unmap_len(tx_buffer, len),
+						DMA_TO_DEVICE);
+	}
+	tx_buffer->next_to_watch = NULL;
+	tx_buffer->skb = NULL;
+	dma_unmap_len_set(tx_buffer, len, 0);
+	/* tx_buffer must be completely set up in the transmit path */
+}
+
+static void ngbe_update_xoff_rx_lfc(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	struct ngbe_hw_stats *hwstats = &adapter->stats;
+	int i;
+	u32 data;
+
+	if ((hw->fc.current_mode != ngbe_fc_full) &&
+		(hw->fc.current_mode != ngbe_fc_rx_pause))
+		return;
+
+	data = rd32(hw, NGBE_MAC_LXOFFRXC);
+
+	hwstats->lxoffrxc += data;
+
+	/* refill credits (no tx hang) if we received xoff */
+	if (!data)
+		return;
+
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		clear_bit(__NGBE_HANG_CHECK_ARMED,
+			  &adapter->tx_ring[i]->state);
+}
+
+static u64 ngbe_get_tx_completed(struct ngbe_ring *ring)
+{
+	return ring->stats.packets;
+}
+
+static u64 ngbe_get_tx_pending(struct ngbe_ring *ring)
+{
+	struct ngbe_adapter *adapter;
+	struct ngbe_hw *hw;
+	u32 head, tail;
+
+	if (ring->accel)
+		adapter = ring->accel->adapter;
+	else
+		adapter = ring->q_vector->adapter;
+
+	hw = &adapter->hw;
+	head = rd32(hw, NGBE_PX_TR_RP(ring->reg_idx));
+	tail = rd32(hw, NGBE_PX_TR_WP(ring->reg_idx));
+
+	return ((head <= tail) ? tail : tail + ring->count) - head;
+}
+
+static inline bool ngbe_check_tx_hang(struct ngbe_ring *tx_ring)
+{
+	u64 tx_done = ngbe_get_tx_completed(tx_ring);
+	u64 tx_done_old = tx_ring->tx_stats.tx_done_old;
+	u64 tx_pending = ngbe_get_tx_pending(tx_ring);
+
+	clear_check_for_tx_hang(tx_ring);
+
+	/*
+	 * Check for a hung queue, but be thorough. This verifies
+	 * that a transmit has been completed since the previous
+	 * check AND there is at least one packet pending. The
+	 * ARMED bit is set to indicate a potential hang. The
+	 * bit is cleared if a pause frame is received to remove
+	 * false hang detection due to PFC or 802.3x frames. By
+	 * requiring this to fail twice we avoid races with
+	 * pfc clearing the ARMED bit and conditions where we
+	 * run the check_tx_hang logic with a transmit completion
+	 * pending but without time to complete it yet.
+	 */
+	if (tx_done_old == tx_done && tx_pending) {
+
+		/* make sure it is true for two checks in a row */
+		return test_and_set_bit(__NGBE_HANG_CHECK_ARMED,
+					&tx_ring->state);
+	}
+	/* update completed stats and continue */
+	tx_ring->tx_stats.tx_done_old = tx_done;
+	/* reset the countdown */
+	clear_bit(__NGBE_HANG_CHECK_ARMED, &tx_ring->state);
+
+	return false;
+}
+
+/**
+ * ngbe_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+static void ngbe_tx_timeout(struct net_device *netdev)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+	bool real_tx_hang = false;
+	int i;
+	u16 value = 0;
+	u32 value2 = 0;
+	u32 head, tail;
+
+#define TX_TIMEO_LIMIT 16000
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct ngbe_ring *tx_ring = adapter->tx_ring[i];
+		if (check_for_tx_hang(tx_ring) && ngbe_check_tx_hang(tx_ring)) {
+			real_tx_hang = true;
+			e_info(drv, "&&ngbe_tx_timeout:i=%d&&", i);
+		}
+	}
+
+	pci_read_config_word(adapter->pdev, PCI_VENDOR_ID, &value);
+	ERROR_REPORT1(NGBE_ERROR_POLLING, "pci vendor id is 0x%x\n", value);
+
+	pci_read_config_word(adapter->pdev, PCI_COMMAND, &value);
+	ERROR_REPORT1(NGBE_ERROR_POLLING, "pci command reg is 0x%x.\n", value);
+
+	value2 = rd32(&adapter->hw, 0x10000);
+	ERROR_REPORT1(NGBE_ERROR_POLLING, "reg 0x10000 value is 0x%08x\n", value2);
+	value2 = rd32(&adapter->hw, 0x180d0);
+	ERROR_REPORT1(NGBE_ERROR_POLLING, "reg 0x180d0 value is 0x%08x\n", value2);
+	value2 = rd32(&adapter->hw, 0x180d4);
+	ERROR_REPORT1(NGBE_ERROR_POLLING, "reg 0x180d4 value is 0x%08x\n", value2);
+	value2 = rd32(&adapter->hw, 0x180d8);
+	ERROR_REPORT1(NGBE_ERROR_POLLING, "reg 0x180d8 value is 0x%08x\n", value2);
+	value2 = rd32(&adapter->hw, 0x180dc);
+	ERROR_REPORT1(NGBE_ERROR_POLLING, "reg 0x180dc value is 0x%08x\n", value2);
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		head = rd32(&adapter->hw, NGBE_PX_TR_RP(adapter->tx_ring[i]->reg_idx));
+		tail = rd32(&adapter->hw, NGBE_PX_TR_WP(adapter->tx_ring[i]->reg_idx));
+
+		ERROR_REPORT1(NGBE_ERROR_POLLING,
+			"tx ring %d next_to_use is %d, next_to_clean is %d\n",
+			i, adapter->tx_ring[i]->next_to_use, adapter->tx_ring[i]->next_to_clean);
+		ERROR_REPORT1(NGBE_ERROR_POLLING,
+			"tx ring %d hw rp is 0x%x, wp is 0x%x\n", i, head, tail);
+	}
+
+	value2 = rd32(&adapter->hw, NGBE_PX_IMS);
+	ERROR_REPORT1(NGBE_ERROR_POLLING,
+			"PX_IMS value is 0x%08x\n", value2);
+
+	if (value2) {
+		ERROR_REPORT1(NGBE_ERROR_POLLING, "clear interrupt mask.\n");
+		wr32(&adapter->hw, NGBE_PX_ICS, value2);
+		wr32(&adapter->hw, NGBE_PX_IMC, value2);
+	}
+
+	if (adapter->hw.bus.lan_id == 0) {
+		ERROR_REPORT1(NGBE_ERROR_POLLING, "tx timeout. do pcie recovery.\n");
+		adapter->flags2 |= NGBE_FLAG2_PCIE_NEED_RECOVER;
+		ngbe_service_event_schedule(adapter);
+	} else
+		wr32(&adapter->hw, NGBE_MIS_PF_SM, 1);
+}
+
+/**
+ * ngbe_clean_tx_irq - Reclaim resources after transmit completes
+ * @q_vector: structure containing interrupt and ring information
+ * @tx_ring: tx ring to clean
+ **/
+static bool ngbe_clean_tx_irq(struct ngbe_q_vector *q_vector,
+							struct ngbe_ring *tx_ring)
+{
+	struct ngbe_adapter *adapter = q_vector->adapter;
+	struct ngbe_tx_buffer *tx_buffer;
+	union ngbe_tx_desc *tx_desc;
+	unsigned int total_bytes = 0, total_packets = 0;
+	unsigned int budget = q_vector->tx.work_limit;
+	unsigned int i = tx_ring->next_to_clean;
+
+	if (test_bit(__NGBE_DOWN, &adapter->state))
+		return true;
+
+	tx_buffer = &tx_ring->tx_buffer_info[i];
+	tx_desc = NGBE_TX_DESC(tx_ring, i);
+	i -= tx_ring->count;
+
+	do {
+		union ngbe_tx_desc *eop_desc = tx_buffer->next_to_watch;
+
+		/* if next_to_watch is not set then there is no work pending */
+		if (!eop_desc)
+			break;
+
+		/* prevent any other reads prior to eop_desc */
+		read_barrier_depends();
+
+		/* if DD is not set pending work has not been completed */
+		if (!(eop_desc->wb.status & cpu_to_le32(NGBE_TXD_STAT_DD)))
+			break;
+
+		/* clear next_to_watch to prevent false hangs */
+		tx_buffer->next_to_watch = NULL;
+
+		/* update the statistics for this packet */
+		total_bytes += tx_buffer->bytecount;
+		total_packets += tx_buffer->gso_segs;
+
+		/* free the skb */
+		dev_consume_skb_any(tx_buffer->skb);
+
+		/* unmap skb header data */
+		dma_unmap_single(tx_ring->dev,
+						dma_unmap_addr(tx_buffer, dma),
+						dma_unmap_len(tx_buffer, len),
+						DMA_TO_DEVICE);
+
+		/* clear tx_buffer data */
+		tx_buffer->skb = NULL;
+		dma_unmap_len_set(tx_buffer, len, 0);
+
+		/* unmap remaining buffers */
+		while (tx_desc != eop_desc) {
+			tx_buffer++;
+			tx_desc++;
+			i++;
+			if (unlikely(!i)) {
+				i -= tx_ring->count;
+				tx_buffer = tx_ring->tx_buffer_info;
+				tx_desc = NGBE_TX_DESC(tx_ring, 0);
+			}
+
+			/* unmap any remaining paged data */
+			if (dma_unmap_len(tx_buffer, len)) {
+				dma_unmap_page(tx_ring->dev,
+							dma_unmap_addr(tx_buffer, dma),
+							dma_unmap_len(tx_buffer, len),
+							DMA_TO_DEVICE);
+				dma_unmap_len_set(tx_buffer, len, 0);
+			}
+		}
+
+		/* move us one more past the eop_desc for start of next pkt */
+		tx_buffer++;
+		tx_desc++;
+		i++;
+		if (unlikely(!i)) {
+			i -= tx_ring->count;
+			tx_buffer = tx_ring->tx_buffer_info;
+			tx_desc = NGBE_TX_DESC(tx_ring, 0);
+		}
+
+		/* issue prefetch for next Tx descriptor */
+		prefetch(tx_desc);
+
+		/* update budget accounting */
+		budget--;
+	} while (likely(budget));
+
+	i += tx_ring->count;
+	tx_ring->next_to_clean = i;
+	u64_stats_update_begin(&tx_ring->syncp);
+	tx_ring->stats.bytes += total_bytes;
+	tx_ring->stats.packets += total_packets;
+	u64_stats_update_end(&tx_ring->syncp);
+	q_vector->tx.total_bytes += total_bytes;
+	q_vector->tx.total_packets += total_packets;
+
+	if (check_for_tx_hang(tx_ring)) {
+		if (!ngbe_check_tx_hang(tx_ring)) {
+			adapter->hang_cnt = 0;
+		} else
+			adapter->hang_cnt++;
+
+		if (adapter->hang_cnt >= 5) {
+			/* schedule immediate reset if we believe we hung */
+			struct ngbe_hw *hw = &adapter->hw;
+			u16 value = 0;
+
+			e_err(drv, "Detected Tx Unit Hang\n"
+				"  Tx Queue             <%d>\n"
+				"  TDH, TDT             <%x>, <%x>\n"
+				"  next_to_use          <%x>\n"
+				"  next_to_clean        <%x>\n"
+				"tx_buffer_info[next_to_clean]\n"
+				"  time_stamp           <%lx>\n"
+				"  jiffies              <%lx>\n",
+				tx_ring->queue_index,
+				rd32(hw, NGBE_PX_TR_RP(tx_ring->reg_idx)),
+				rd32(hw, NGBE_PX_TR_WP(tx_ring->reg_idx)),
+				tx_ring->next_to_use, i,
+				tx_ring->tx_buffer_info[i].time_stamp, jiffies);
+
+			pci_read_config_word(adapter->pdev, PCI_VENDOR_ID, &value);
+			if (value == NGBE_FAILED_READ_CFG_WORD) {
+				e_info(hw, "pcie link has been lost.\n");
+			}
+
+			netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index);
+
+			e_info(probe,
+				"tx hang %d detected on queue %d, resetting adapter\n",
+				adapter->tx_timeout_count + 1, tx_ring->queue_index);
+
+			/* schedule immediate reset if we believe we hung */
+			e_info(hw, "real tx hang. do pcie recovery.\n");
+			adapter->flags2 |= NGBE_FLAG2_PCIE_NEED_RECOVER;
+			ngbe_service_event_schedule(adapter);
+
+			/* the adapter is about to reset, no point in enabling stuff */
+			return true;
+		}
+	}
+
+	netdev_tx_completed_queue(txring_txq(tx_ring),
+				  total_packets, total_bytes);
+
+#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
+	if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) &&
+			(ngbe_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD))) {
+		/* Make sure that anybody stopping the queue after this
+		 * sees the new next_to_clean.
+		 */
+		smp_mb();
+
+		if (__netif_subqueue_stopped(tx_ring->netdev,
+			tx_ring->queue_index)
+			&& !test_bit(__NGBE_DOWN, &adapter->state)) {
+			netif_wake_subqueue(tx_ring->netdev,
+						tx_ring->queue_index);
+			++tx_ring->tx_stats.restart_queue;
+		}
+	}
+
+	return !!budget;
+}
+
+#define NGBE_RSS_L4_TYPES_MASK \
+	((1ul << NGBE_RXD_RSSTYPE_IPV4_TCP) | \
+	 (1ul << NGBE_RXD_RSSTYPE_IPV4_UDP) | \
+	 (1ul << NGBE_RXD_RSSTYPE_IPV4_SCTP) | \
+	 (1ul << NGBE_RXD_RSSTYPE_IPV6_TCP) | \
+	 (1ul << NGBE_RXD_RSSTYPE_IPV6_UDP) | \
+	 (1ul << NGBE_RXD_RSSTYPE_IPV6_SCTP))
+
+static inline void ngbe_rx_hash(struct ngbe_ring *ring,
+				 union ngbe_rx_desc *rx_desc,
+				 struct sk_buff *skb)
+{
+	u16 rss_type;
+
+	if (!(ring->netdev->features & NETIF_F_RXHASH))
+		return;
+
+	rss_type = le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.pkt_info) &
+		   NGBE_RXD_RSSTYPE_MASK;
+
+	if (!rss_type)
+		return;
+
+	skb_set_hash(skb, le32_to_cpu(rx_desc->wb.lower.hi_dword.rss),
+		     (NGBE_RSS_L4_TYPES_MASK & (1ul << rss_type)) ?
+		     PKT_HASH_TYPE_L4 : PKT_HASH_TYPE_L3);
+}
+
+/**
+ * ngbe_rx_checksum - indicate in skb if hw indicated a good cksum
+ * @ring: structure containing ring specific data
+ * @rx_desc: current Rx descriptor being processed
+ * @skb: skb currently being received and modified
+ **/
+static inline void ngbe_rx_checksum(struct ngbe_ring *ring,
+				     union ngbe_rx_desc *rx_desc,
+				     struct sk_buff *skb)
+{
+	ngbe_dptype dptype = decode_rx_desc_ptype(rx_desc);
+
+	skb->ip_summed = CHECKSUM_NONE;
+
+	skb_checksum_none_assert(skb);
+
+	/* Rx csum disabled */
+	if (!(ring->netdev->features & NETIF_F_RXCSUM))
+		return;
+
+	/* if IPv4 header checksum error */
+	if ((ngbe_test_staterr(rx_desc, NGBE_RXD_STAT_IPCS) &&
+		ngbe_test_staterr(rx_desc, NGBE_RXD_ERR_IPE)) ||
+		(ngbe_test_staterr(rx_desc, NGBE_RXD_STAT_OUTERIPCS) &&
+		ngbe_test_staterr(rx_desc, NGBE_RXD_ERR_OUTERIPER))) {
+		ring->rx_stats.csum_err++;
+		return;
+	}
+
+	/* L4 checksum offload flag must set for the below code to work */
+	if (!ngbe_test_staterr(rx_desc, NGBE_RXD_STAT_L4CS))
+		return;
+
+	/*likely incorrect csum if IPv6 Dest Header found */
+	if (dptype.prot != NGBE_DEC_PTYPE_PROT_SCTP && NGBE_RXD_IPV6EX(rx_desc))
+		return;
+
+	/* if L4 checksum error */
+	if (ngbe_test_staterr(rx_desc, NGBE_RXD_ERR_TCPE)) {
+		ring->rx_stats.csum_err++;
+		return;
+	}
+	/* If there is an outer header present that might contain a checksum
+	 * we need to bump the checksum level by 1 to reflect the fact that
+	 * we are indicating we validated the inner checksum.
+	*/
+	if (dptype.etype >= NGBE_DEC_PTYPE_ETYPE_IG) {
+		skb->csum_level = 1;
+	}
+
+	/* It must be a TCP or UDP or SCTP packet with a valid checksum */
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+	ring->rx_stats.csum_good_cnt++;
+}
+
+static bool ngbe_alloc_mapped_skb(struct ngbe_ring *rx_ring,
+			struct ngbe_rx_buffer *bi)
+{
+	struct sk_buff *skb = bi->skb;
+	dma_addr_t dma = bi->dma;
+
+	if (unlikely(dma))
+		return true;
+
+	if (likely(!skb)) {
+		skb = netdev_alloc_skb_ip_align(rx_ring->netdev,
+						rx_ring->rx_buf_len);
+		if (unlikely(!skb)) {
+			rx_ring->rx_stats.alloc_rx_buff_failed++;
+			return false;
+		}
+
+		bi->skb = skb;
+	}
+
+	dma = dma_map_single(rx_ring->dev, skb->data,
+			     rx_ring->rx_buf_len, DMA_FROM_DEVICE);
+
+	/*
+	 * if mapping failed free memory back to system since
+	 * there isn't much point in holding memory we can't use
+	 */
+	if (dma_mapping_error(rx_ring->dev, dma)) {
+		dev_kfree_skb_any(skb);
+		bi->skb = NULL;
+
+		rx_ring->rx_stats.alloc_rx_buff_failed++;
+		return false;
+	}
+
+	bi->dma = dma;
+	return true;
+}
+
+static bool ngbe_alloc_mapped_page(struct ngbe_ring *rx_ring,
+				    struct ngbe_rx_buffer *bi)
+{
+	struct page *page = bi->page;
+	dma_addr_t dma;
+
+	/* since we are recycling buffers we should seldom need to alloc */
+	if (likely(page))
+		return true;
+
+	/* alloc new page for storage */
+	page = dev_alloc_pages(ngbe_rx_pg_order(rx_ring));
+	if (unlikely(!page)) {
+		rx_ring->rx_stats.alloc_rx_page_failed++;
+		return false;
+	}
+
+	/* map page for use */
+	dma = dma_map_page(rx_ring->dev, page, 0,
+			   ngbe_rx_pg_size(rx_ring), DMA_FROM_DEVICE);
+
+	/*
+	 * if mapping failed free memory back to system since
+	 * there isn't much point in holding memory we can't use
+	 */
+	if (dma_mapping_error(rx_ring->dev, dma)) {
+		__free_pages(page, ngbe_rx_pg_order(rx_ring));
+
+		rx_ring->rx_stats.alloc_rx_page_failed++;
+		return false;
+	}
+
+	bi->page_dma = dma;
+	bi->page = page;
+	bi->page_offset = 0;
+
+	return true;
+}
+
+/**
+ * ngbe_alloc_rx_buffers - Replace used receive buffers
+ * @rx_ring: ring to place buffers on
+ * @cleaned_count: number of buffers to replace
+ **/
+void ngbe_alloc_rx_buffers(struct ngbe_ring *rx_ring, u16 cleaned_count)
+{
+	union ngbe_rx_desc *rx_desc;
+	struct ngbe_rx_buffer *bi;
+	u16 i = rx_ring->next_to_use;
+
+	/* nothing to do */
+	if (!cleaned_count)
+		return;
+
+	rx_desc = NGBE_RX_DESC(rx_ring, i);
+	bi = &rx_ring->rx_buffer_info[i];
+	i -= rx_ring->count;
+
+	do {
+		if (ring_is_hs_enabled(rx_ring)) {
+			if (!ngbe_alloc_mapped_skb(rx_ring, bi))
+				break;
+			rx_desc->read.hdr_addr = cpu_to_le64(bi->dma);
+		}
+
+		if (!ngbe_alloc_mapped_page(rx_ring, bi))
+			break;
+		rx_desc->read.pkt_addr =
+			cpu_to_le64(bi->page_dma + bi->page_offset);
+
+		rx_desc++;
+		bi++;
+		i++;
+		if (unlikely(!i)) {
+			rx_desc = NGBE_RX_DESC(rx_ring, 0);
+			bi = rx_ring->rx_buffer_info;
+			i -= rx_ring->count;
+		}
+
+		/* clear the status bits for the next_to_use descriptor */
+		rx_desc->wb.upper.status_error = 0;
+
+		cleaned_count--;
+	} while (cleaned_count);
+
+	i += rx_ring->count;
+
+	if (rx_ring->next_to_use != i) {
+		rx_ring->next_to_use = i;
+
+		/* update next to alloc since we have filled the ring */
+		rx_ring->next_to_alloc = i;
+
+		/* Force memory writes to complete before letting h/w
+		 * know there are new descriptors to fetch.  (Only
+		 * applicable for weak-ordered memory model archs,
+		 * such as IA-64).
+		 */
+		wmb();
+		writel(i, rx_ring->tail);
+	}
+}
+
+static inline u16 ngbe_get_hlen(struct ngbe_ring *rx_ring,
+				 union ngbe_rx_desc *rx_desc)
+{
+	__le16 hdr_info = rx_desc->wb.lower.lo_dword.hs_rss.hdr_info;
+	u16 hlen = le16_to_cpu(hdr_info) & NGBE_RXD_HDRBUFLEN_MASK;
+
+	UNREFERENCED_PARAMETER(rx_ring);
+
+	if (hlen > (NGBE_RX_HDR_SIZE << NGBE_RXD_HDRBUFLEN_SHIFT))
+		hlen = 0;
+	else
+		hlen >>= NGBE_RXD_HDRBUFLEN_SHIFT;
+
+	return hlen;
+}
+
+static void ngbe_rx_vlan(struct ngbe_ring *ring,
+			  union ngbe_rx_desc *rx_desc,
+			  struct sk_buff *skb)
+{
+	u8 idx = 0;
+	u16 ethertype;
+
+	if ((ring->netdev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
+		ngbe_test_staterr(rx_desc, NGBE_RXD_STAT_VP)) {
+		idx = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.pkt_info) &
+			NGBE_RXD_TPID_MASK) >> NGBE_RXD_TPID_SHIFT;
+		ethertype = ring->q_vector->adapter->hw.tpid[idx];
+		__vlan_hwaccel_put_tag(skb,
+							htons(ethertype),
+							le16_to_cpu(rx_desc->wb.upper.vlan));
+	}
+}
+
+/**
+ * ngbe_process_skb_fields - Populate skb header fields from Rx descriptor
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being populated
+ *
+ * This function checks the ring, descriptor, and packet information in
+ * order to populate the hash, checksum, VLAN, timestamp, protocol, and
+ * other fields within the skb.
+ **/
+static void ngbe_process_skb_fields(struct ngbe_ring *rx_ring,
+				     union ngbe_rx_desc *rx_desc,
+				     struct sk_buff *skb)
+{
+	u32 flags = rx_ring->q_vector->adapter->flags;
+
+	ngbe_rx_hash(rx_ring, rx_desc, skb);
+	ngbe_rx_checksum(rx_ring, rx_desc, skb);
+
+	if (unlikely(flags & NGBE_FLAG_RX_HWTSTAMP_ENABLED) &&
+		unlikely(ngbe_test_staterr(rx_desc, NGBE_RXD_STAT_TS))) {
+		ngbe_ptp_rx_hwtstamp(rx_ring->q_vector->adapter, skb);
+		rx_ring->last_rx_timestamp = jiffies;
+	}
+
+	ngbe_rx_vlan(rx_ring, rx_desc, skb);
+	skb_record_rx_queue(skb, rx_ring->queue_index);
+	skb->protocol = eth_type_trans(skb, rx_ring->netdev);
+}
+
+static void ngbe_rx_skb(struct ngbe_q_vector *q_vector,
+			 struct ngbe_ring *rx_ring,
+			 union ngbe_rx_desc *rx_desc,
+			 struct sk_buff *skb)
+{
+	napi_gro_receive(&q_vector->napi, skb);
+}
+
+/**
+ * ngbe_is_non_eop - process handling of non-EOP buffers
+ * @rx_ring: Rx ring being processed
+ * @rx_desc: Rx descriptor for current buffer
+ * @skb: Current socket buffer containing buffer in progress
+ *
+ * This function updates next to clean.  If the buffer is an EOP buffer
+ * this function exits returning false, otherwise it will place the
+ * sk_buff in the next buffer to be chained and return true indicating
+ * that this is in fact a non-EOP buffer.
+ **/
+static bool ngbe_is_non_eop(struct ngbe_ring *rx_ring,
+			     union ngbe_rx_desc *rx_desc,
+			     struct sk_buff *skb)
+{
+	struct ngbe_rx_buffer *rx_buffer =
+			&rx_ring->rx_buffer_info[rx_ring->next_to_clean];
+	u32 ntc = rx_ring->next_to_clean + 1;
+
+	/* fetch, update, and store next to clean */
+	ntc = (ntc < rx_ring->count) ? ntc : 0;
+	rx_ring->next_to_clean = ntc;
+
+	prefetch(NGBE_RX_DESC(rx_ring, ntc));
+
+	/* if we are the last buffer then there is nothing else to do */
+	if (likely(ngbe_test_staterr(rx_desc, NGBE_RXD_STAT_EOP)))
+		return false;
+
+	/* place skb in next buffer to be received */
+	if (ring_is_hs_enabled(rx_ring)) {
+		rx_buffer->skb = rx_ring->rx_buffer_info[ntc].skb;
+		rx_buffer->dma = rx_ring->rx_buffer_info[ntc].dma;
+		rx_ring->rx_buffer_info[ntc].dma = 0;
+	}
+	rx_ring->rx_buffer_info[ntc].skb = skb;
+
+	rx_ring->rx_stats.non_eop_descs++;
+
+	return true;
+}
+
+/**
+ * ngbe_pull_tail - ngbe specific version of skb_pull_tail
+ * @skb: pointer to current skb being adjusted
+ *
+ * This function is an ngbe specific version of __pskb_pull_tail.  The
+ * main difference between this version and the original function is that
+ * this function can make several assumptions about the state of things
+ * that allow for significant optimizations versus the standard function.
+ * As a result we can do things like drop a frag and maintain an accurate
+ * truesize for the skb.
+ */
+static void ngbe_pull_tail(struct sk_buff *skb)
+{
+	skb_frag_t *frag = &skb_shinfo(skb)->frags[0];
+	unsigned char *va;
+	unsigned int pull_len;
+
+	/*
+	 * it is valid to use page_address instead of kmap since we are
+	 * working with pages allocated out of the lomem pool per
+	 * alloc_page(GFP_ATOMIC)
+	 */
+	va = skb_frag_address(frag);
+
+	/*
+	 * we need the header to contain the greater of either ETH_HLEN or
+	 * 60 bytes if the skb->len is less than 60 for skb_pad.
+	 */
+	pull_len = eth_get_headlen(va, NGBE_RX_HDR_SIZE);
+
+	/* align pull length to size of long to optimize memcpy performance */
+	skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long)));
+
+	/* update all of the pointers */
+	skb_frag_size_sub(frag, pull_len);
+	frag->page_offset += pull_len;
+	skb->data_len -= pull_len;
+	skb->tail += pull_len;
+}
+
+/**
+ * ngbe_dma_sync_frag - perform DMA sync for first frag of SKB
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @skb: pointer to current skb being updated
+ *
+ * This function provides a basic DMA sync up for the first fragment of an
+ * skb.  The reason for doing this is that the first fragment cannot be
+ * unmapped until we have reached the end of packet descriptor for a buffer
+ * chain.
+ */
+static void ngbe_dma_sync_frag(struct ngbe_ring *rx_ring,
+				struct sk_buff *skb)
+{
+	if (ring_uses_build_skb(rx_ring)) {
+		unsigned long offset = (unsigned long)(skb->data) & ~PAGE_MASK;
+
+		dma_sync_single_range_for_cpu(rx_ring->dev,
+					      NGBE_CB(skb)->dma,
+					      offset,
+					      skb_headlen(skb),
+					      DMA_FROM_DEVICE);
+	} else {
+		skb_frag_t *frag = &skb_shinfo(skb)->frags[0];
+
+		dma_sync_single_range_for_cpu(rx_ring->dev,
+					      NGBE_CB(skb)->dma,
+					      frag->page_offset,
+					      skb_frag_size(frag),
+					      DMA_FROM_DEVICE);
+	}
+
+	/* if the page was released unmap it */
+	if (unlikely(NGBE_CB(skb)->page_released)) {
+		dma_unmap_page_attrs(rx_ring->dev, NGBE_CB(skb)->dma,
+				     ngbe_rx_pg_size(rx_ring),
+				     DMA_FROM_DEVICE,
+				     NGBE_RX_DMA_ATTR);
+	}
+}
+
+/**
+ * ngbe_cleanup_headers - Correct corrupted or empty headers
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being fixed
+ *
+ * Check for corrupted packet headers caused by senders on the local L2
+ * embedded NIC switch not setting up their Tx Descriptors right.  These
+ * should be very rare.
+ *
+ * Also address the case where we are pulling data in on pages only
+ * and as such no data is present in the skb header.
+ *
+ * In addition if skb is not at least 60 bytes we need to pad it so that
+ * it is large enough to qualify as a valid Ethernet frame.
+ *
+ * Returns true if an error was encountered and skb was freed.
+ **/
+static bool ngbe_cleanup_headers(struct ngbe_ring *rx_ring,
+				  union ngbe_rx_desc *rx_desc,
+				  struct sk_buff *skb)
+{
+	struct net_device *netdev = rx_ring->netdev;
+
+	/* verify that the packet does not have any known errors */
+	if (unlikely(ngbe_test_staterr(rx_desc,
+		NGBE_RXD_ERR_FRAME_ERR_MASK) &&
+		!(netdev->features & NETIF_F_RXALL))) {
+		dev_kfree_skb_any(skb);
+		return true;
+	}
+
+	/* place header in linear portion of buffer */
+	if (skb_is_nonlinear(skb)  && !skb_headlen(skb))
+		ngbe_pull_tail(skb);
+
+	/* if eth_skb_pad returns an error the skb was freed */
+	if (eth_skb_pad(skb))
+		return true;
+
+	return false;
+}
+
+/**
+ * ngbe_reuse_rx_page - page flip buffer and store it back on the ring
+ * @rx_ring: rx descriptor ring to store buffers on
+ * @old_buff: donor buffer to have page reused
+ *
+ * Synchronizes page for reuse by the adapter
+ **/
+static void ngbe_reuse_rx_page(struct ngbe_ring *rx_ring,
+				struct ngbe_rx_buffer *old_buff)
+{
+	struct ngbe_rx_buffer *new_buff;
+	u16 nta = rx_ring->next_to_alloc;
+
+	new_buff = &rx_ring->rx_buffer_info[nta];
+
+	/* update, and store next to alloc */
+	nta++;
+	rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0;
+
+	/* transfer page from old buffer to new buffer */
+	new_buff->page_dma = old_buff->page_dma;
+	new_buff->page = old_buff->page;
+	new_buff->page_offset = old_buff->page_offset;
+
+	/* sync the buffer for use by the device */
+	dma_sync_single_range_for_device(rx_ring->dev, new_buff->page_dma,
+					 new_buff->page_offset,
+					 ngbe_rx_bufsz(rx_ring),
+					 DMA_FROM_DEVICE);
+}
+
+static inline bool ngbe_page_is_reserved(struct page *page)
+{
+	return (page_to_nid(page) != numa_mem_id()) || page_is_pfmemalloc(page);
+}
+
+/**
+ * ngbe_add_rx_frag - Add contents of Rx buffer to sk_buff
+ * @rx_ring: rx descriptor ring to transact packets on
+ * @rx_buffer: buffer containing page to add
+ * @rx_desc: descriptor containing length of buffer written by hardware
+ * @skb: sk_buff to place the data into
+ *
+ * This function will add the data contained in rx_buffer->page to the skb.
+ * This is done either through a direct copy if the data in the buffer is
+ * less than the skb header size, otherwise it will just attach the page as
+ * a frag to the skb.
+ *
+ * The function will then update the page offset if necessary and return
+ * true if the buffer can be reused by the adapter.
+ **/
+static bool ngbe_add_rx_frag(struct ngbe_ring *rx_ring,
+			      struct ngbe_rx_buffer *rx_buffer,
+			      union ngbe_rx_desc *rx_desc,
+			      struct sk_buff *skb)
+{
+	struct page *page = rx_buffer->page;
+	unsigned int size = le16_to_cpu(rx_desc->wb.upper.length);
+#if (PAGE_SIZE < 8192)
+	unsigned int truesize = ngbe_rx_bufsz(rx_ring);
+#else
+	unsigned int truesize = ALIGN(size, L1_CACHE_BYTES);
+	unsigned int last_offset = ngbe_rx_pg_size(rx_ring) -
+					ngbe_rx_bufsz(rx_ring);
+#endif
+
+	if ((size <= NGBE_RX_HDR_SIZE) && !skb_is_nonlinear(skb) &&
+	    !ring_is_hs_enabled(rx_ring)) {
+		unsigned char *va = page_address(page) + rx_buffer->page_offset;
+
+		memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long)));
+
+		/* page is not reserved, we can reuse buffer as-is */
+		if (likely(!ngbe_page_is_reserved(page)))
+			return true;
+
+		/* this page cannot be reused so discard it */
+		__free_pages(page, ngbe_rx_pg_order(rx_ring));
+		return false;
+	}
+
+	skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
+			rx_buffer->page_offset, size, truesize);
+
+	/* avoid re-using remote pages */
+	if (unlikely(ngbe_page_is_reserved(page)))
+		return false;
+
+#if (PAGE_SIZE < 8192)
+	/* if we are only owner of page we can reuse it */
+	if (unlikely(page_count(page) != 1))
+		return false;
+
+	/* flip page offset to other buffer */
+	rx_buffer->page_offset ^= truesize;
+#else
+	/* move offset up to the next cache line */
+	rx_buffer->page_offset += truesize;
+
+	if (rx_buffer->page_offset > last_offset)
+		return false;
+#endif
+
+	/* Even if we own the page, we are not allowed to use atomic_set()
+	 * This would break get_page_unless_zero() users.
+	 */
+	page_ref_inc(page);
+
+	return true;
+}
+
+static struct sk_buff *ngbe_fetch_rx_buffer(struct ngbe_ring *rx_ring,
+					     union ngbe_rx_desc *rx_desc)
+{
+	struct ngbe_rx_buffer *rx_buffer;
+	struct sk_buff *skb;
+	struct page *page;
+
+	rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean];
+	page = rx_buffer->page;
+	prefetchw(page);
+
+	skb = rx_buffer->skb;
+
+	if (likely(!skb)) {
+		void *page_addr = page_address(page) +
+				  rx_buffer->page_offset;
+
+		/* prefetch first cache line of first page */
+		prefetch(page_addr);
+#if L1_CACHE_BYTES < 128
+		prefetch(page_addr + L1_CACHE_BYTES);
+#endif
+
+		/* allocate a skb to store the frags */
+		skb = netdev_alloc_skb_ip_align(rx_ring->netdev,
+						NGBE_RX_HDR_SIZE);
+		if (unlikely(!skb)) {
+			rx_ring->rx_stats.alloc_rx_buff_failed++;
+			return NULL;
+		}
+
+		/*
+		 * we will be copying header into skb->data in
+		 * pskb_may_pull so it is in our interest to prefetch
+		 * it now to avoid a possible cache miss
+		 */
+		prefetchw(skb->data);
+
+		/*
+		 * Delay unmapping of the first packet. It carries the
+		 * header information, HW may still access the header
+		 * after the writeback.  Only unmap it when EOP is
+		 * reached
+		 */
+		if (likely(ngbe_test_staterr(rx_desc, NGBE_RXD_STAT_EOP)))
+			goto dma_sync;
+
+		NGBE_CB(skb)->dma = rx_buffer->page_dma;
+	} else {
+		if (ngbe_test_staterr(rx_desc, NGBE_RXD_STAT_EOP))
+			ngbe_dma_sync_frag(rx_ring, skb);
+
+dma_sync:
+		/* we are reusing so sync this buffer for CPU use */
+		dma_sync_single_range_for_cpu(rx_ring->dev,
+					      rx_buffer->page_dma,
+					      rx_buffer->page_offset,
+					      ngbe_rx_bufsz(rx_ring),
+					      DMA_FROM_DEVICE);
+
+		rx_buffer->skb = NULL;
+	}
+
+	/* pull page into skb */
+	if (ngbe_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) {
+		/* hand second half of page back to the ring */
+		ngbe_reuse_rx_page(rx_ring, rx_buffer);
+	} else if (NGBE_CB(skb)->dma == rx_buffer->page_dma) {
+		/* the page has been released from the ring */
+		NGBE_CB(skb)->page_released = true;
+	} else {
+		/* we are not reusing the buffer so unmap it */
+		dma_unmap_page(rx_ring->dev, rx_buffer->page_dma,
+			       ngbe_rx_pg_size(rx_ring),
+			       DMA_FROM_DEVICE);
+	}
+
+	/* clear contents of buffer_info */
+	rx_buffer->page = NULL;
+
+	return skb;
+}
+
+static struct sk_buff *ngbe_fetch_rx_buffer_hs(struct ngbe_ring *rx_ring,
+					     union ngbe_rx_desc *rx_desc)
+{
+	struct ngbe_rx_buffer *rx_buffer;
+	struct sk_buff *skb;
+	struct page *page;
+	int hdr_len = 0;
+
+	rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean];
+	page = rx_buffer->page;
+	prefetchw(page);
+
+	skb = rx_buffer->skb;
+	rx_buffer->skb = NULL;
+	prefetchw(skb->data);
+
+	if (!skb_is_nonlinear(skb)) {
+		hdr_len = ngbe_get_hlen(rx_ring, rx_desc);
+		if (hdr_len > 0) {
+			__skb_put(skb, hdr_len);
+			NGBE_CB(skb)->dma_released = true;
+			NGBE_CB(skb)->dma = rx_buffer->dma;
+			rx_buffer->dma = 0;
+		} else {
+			dma_unmap_single(rx_ring->dev,
+					 rx_buffer->dma,
+					 rx_ring->rx_buf_len,
+					 DMA_FROM_DEVICE);
+			rx_buffer->dma = 0;
+			if (likely(ngbe_test_staterr(rx_desc, NGBE_RXD_STAT_EOP)))
+				goto dma_sync;
+			NGBE_CB(skb)->dma = rx_buffer->page_dma;
+			goto add_frag;
+		}
+	}
+
+	if (ngbe_test_staterr(rx_desc, NGBE_RXD_STAT_EOP)) {
+		if (skb_headlen(skb)) {
+			if (NGBE_CB(skb)->dma_released == true) {
+				dma_unmap_single(rx_ring->dev,
+						 NGBE_CB(skb)->dma,
+						 rx_ring->rx_buf_len,
+						 DMA_FROM_DEVICE);
+				NGBE_CB(skb)->dma = 0;
+				NGBE_CB(skb)->dma_released = false;
+			}
+		} else
+			ngbe_dma_sync_frag(rx_ring, skb);
+	}
+
+dma_sync:
+	/* we are reusing so sync this buffer for CPU use */
+	dma_sync_single_range_for_cpu(rx_ring->dev,
+								rx_buffer->page_dma,
+								rx_buffer->page_offset,
+								ngbe_rx_bufsz(rx_ring),
+								DMA_FROM_DEVICE);
+add_frag:
+	/* pull page into skb */
+	if (ngbe_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) {
+		/* hand second half of page back to the ring */
+		ngbe_reuse_rx_page(rx_ring, rx_buffer);
+	} else if (NGBE_CB(skb)->dma == rx_buffer->page_dma) {
+		/* the page has been released from the ring */
+		NGBE_CB(skb)->page_released = true;
+	} else {
+		/* we are not reusing the buffer so unmap it */
+		dma_unmap_page(rx_ring->dev, rx_buffer->page_dma,
+					ngbe_rx_pg_size(rx_ring),
+					DMA_FROM_DEVICE);
+	}
+
+	/* clear contents of buffer_info */
+	rx_buffer->page = NULL;
+
+	return skb;
+}
+
+/**
+ * ngbe_clean_rx_irq - Clean completed descriptors from Rx ring - bounce buf
+ * @q_vector: structure containing interrupt and ring information
+ * @rx_ring: rx descriptor ring to transact packets on
+ * @budget: Total limit on number of packets to process
+ *
+ * This function provides a "bounce buffer" approach to Rx interrupt
+ * processing.  The advantage to this is that on systems that have
+ * expensive overhead for IOMMU access this provides a means of avoiding
+ * it by maintaining the mapping of the page to the syste.
+ *
+ * Returns amount of work completed.
+ **/
+static int ngbe_clean_rx_irq(struct ngbe_q_vector *q_vector,
+			       struct ngbe_ring *rx_ring,
+			       int budget)
+{
+	unsigned int total_rx_bytes = 0, total_rx_packets = 0;
+	u16 cleaned_count = ngbe_desc_unused(rx_ring);
+
+	do {
+		union ngbe_rx_desc *rx_desc;
+		struct sk_buff *skb;
+
+		/* return some buffers to hardware, one at a time is too slow */
+		if (cleaned_count >= NGBE_RX_BUFFER_WRITE) {
+			ngbe_alloc_rx_buffers(rx_ring, cleaned_count);
+			cleaned_count = 0;
+		}
+
+		rx_desc = NGBE_RX_DESC(rx_ring, rx_ring->next_to_clean);
+
+		if (!ngbe_test_staterr(rx_desc, NGBE_RXD_STAT_DD))
+			break;
+
+		/* This memory barrier is needed to keep us from reading
+		 * any other fields out of the rx_desc until we know the
+		 * descriptor has been written back
+		 */
+		dma_rmb();
+
+		/* retrieve a buffer from the ring */
+		if (ring_is_hs_enabled(rx_ring))
+			skb = ngbe_fetch_rx_buffer_hs(rx_ring, rx_desc);
+		else
+			skb = ngbe_fetch_rx_buffer(rx_ring, rx_desc);
+
+		/* exit if we failed to retrieve a buffer */
+		if (!skb)
+			break;
+
+		cleaned_count++;
+
+		/* place incomplete frames back on ring for completion */
+		if (ngbe_is_non_eop(rx_ring, rx_desc, skb))
+			continue;
+
+		/* verify the packet layout is correct */
+		if (ngbe_cleanup_headers(rx_ring, rx_desc, skb))
+			continue;
+
+		/* probably a little skewed due to removing CRC */
+		total_rx_bytes += skb->len;
+
+		/* populate checksum, timestamp, VLAN, and protocol */
+		ngbe_process_skb_fields(rx_ring, rx_desc, skb);
+
+		ngbe_rx_skb(q_vector, rx_ring, rx_desc, skb);
+
+		/* update budget accounting */
+		total_rx_packets++;
+	} while (likely(total_rx_packets < budget));
+
+	u64_stats_update_begin(&rx_ring->syncp);
+	rx_ring->stats.packets += total_rx_packets;
+	rx_ring->stats.bytes += total_rx_bytes;
+	u64_stats_update_end(&rx_ring->syncp);
+	q_vector->rx.total_packets += total_rx_packets;
+	q_vector->rx.total_bytes += total_rx_bytes;
+
+	return total_rx_packets;
+}
+
+/**
+ * ngbe_configure_msix - Configure MSI-X hardware
+ * @adapter: board private structure
+ *
+ * ngbe_configure_msix sets up the hardware to properly generate MSI-X
+ * interrupts.
+ **/
+static void ngbe_configure_msix(struct ngbe_adapter *adapter)
+{
+	u16 v_idx;
+	u32 i;
+	u32 eitrsel = 0;
+
+	/* Populate MSIX to EITR Select */
+	if (!(adapter->flags & NGBE_FLAG_VMDQ_ENABLED))
+		wr32(&adapter->hw, NGBE_PX_ITRSEL, eitrsel);
+	else {
+		for (i = 0; i < adapter->num_vfs; i++) {
+			eitrsel |= 1 << i;
+		}
+		wr32(&adapter->hw, NGBE_PX_ITRSEL, eitrsel);
+	}
+
+	/*
+	 * Populate the IVAR table and set the ITR values to the
+	 * corresponding register.
+	 */
+	for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) {
+		struct ngbe_q_vector *q_vector = adapter->q_vector[v_idx];
+		struct ngbe_ring *ring;
+
+		ngbe_for_each_ring(ring, q_vector->rx)
+			ngbe_set_ivar(adapter, 0, ring->reg_idx, v_idx);
+
+		ngbe_for_each_ring(ring, q_vector->tx)
+			ngbe_set_ivar(adapter, 1, ring->reg_idx, v_idx);
+
+		ngbe_write_eitr(q_vector);
+	}
+
+	/* misc ivar from seq 1 to seq 8 */
+	if (adapter->flags2 & NGBE_FLAG2_SRIOV_MISC_IRQ_REMAP)
+		v_idx += adapter->ring_feature[RING_F_VMDQ].offset;
+
+	ngbe_set_ivar(adapter, -1, 0, v_idx);
+	wr32(&adapter->hw, NGBE_PX_ITR(v_idx), 1950);
+}
+
+enum latency_range {
+	lowest_latency = 0,
+	low_latency = 1,
+	bulk_latency = 2,
+	latency_invalid = 255
+};
+
+/**
+ * ngbe_write_eitr - write EITR register in hardware specific way
+ * @q_vector: structure containing interrupt and ring information
+ *
+ * This function is made to be called by ethtool and by the driver
+ * when it needs to update EITR registers at runtime.  Hardware
+ * specific quirks/differences are taken care of here.
+ */
+void ngbe_write_eitr(struct ngbe_q_vector *q_vector)
+{
+	struct ngbe_adapter *adapter = q_vector->adapter;
+	struct ngbe_hw *hw = &adapter->hw;
+	int v_idx = q_vector->v_idx;
+	u32 itr_reg = q_vector->itr & NGBE_MAX_EITR;
+
+	itr_reg |= NGBE_PX_ITR_CNT_WDIS;
+
+	wr32(hw, NGBE_PX_ITR(v_idx), itr_reg);
+}
+
+/**
+ * ngbe_check_overtemp_subtask - check for over temperature
+ * @adapter: pointer to adapter
+ **/
+static void ngbe_check_overtemp_subtask(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 eicr = adapter->interrupt_event;
+	s32 temp_state;
+
+	if (test_bit(__NGBE_DOWN, &adapter->state))
+		return;
+	if (!(adapter->flags2 & NGBE_FLAG2_TEMP_SENSOR_CAPABLE))
+		return;
+	if (!(adapter->flags2 & NGBE_FLAG2_TEMP_SENSOR_EVENT))
+		return;
+
+	adapter->flags2 &= ~NGBE_FLAG2_TEMP_SENSOR_EVENT;
+
+	/*
+	 * Since the warning interrupt is for both ports
+	 * we don't have to check if:
+	 *  - This interrupt wasn't for our port.
+	 *  - We may have missed the interrupt so always have to
+	 *    check if we  got a LSC
+	 */
+	if (!(eicr & NGBE_PX_MISC_IC_OVER_HEAT))
+		return;
+
+	temp_state = ngbe_phy_check_overtemp(hw);
+	if (!temp_state || temp_state == NGBE_NOT_IMPLEMENTED)
+		return;
+
+	if (temp_state == NGBE_ERR_UNDERTEMP &&
+		test_bit(__NGBE_HANGING, &adapter->state)) {
+		e_crit(drv, "%s\n", ngbe_underheat_msg);
+		wr32m(&adapter->hw, NGBE_RDB_PB_CTL,
+				NGBE_RDB_PB_CTL_PBEN, NGBE_RDB_PB_CTL_PBEN);
+		netif_carrier_on(adapter->netdev);
+		clear_bit(__NGBE_HANGING, &adapter->state);
+	} else if (temp_state == NGBE_ERR_OVERTEMP &&
+		!test_and_set_bit(__NGBE_HANGING, &adapter->state)) {
+		e_crit(drv, "%s\n", ngbe_overheat_msg);
+		netif_carrier_off(adapter->netdev);
+		wr32m(&adapter->hw, NGBE_RDB_PB_CTL,
+					NGBE_RDB_PB_CTL_PBEN, 0);
+	}
+
+	adapter->interrupt_event = 0;
+}
+
+static void ngbe_check_overtemp_event(struct ngbe_adapter *adapter, u32 eicr)
+{
+	if (!(adapter->flags2 & NGBE_FLAG2_TEMP_SENSOR_CAPABLE))
+		return;
+
+	if (!(eicr & NGBE_PX_MISC_IC_OVER_HEAT))
+		return;
+	if (!test_bit(__NGBE_DOWN, &adapter->state)) {
+		adapter->interrupt_event = eicr;
+		adapter->flags2 |= NGBE_FLAG2_TEMP_SENSOR_EVENT;
+		ngbe_service_event_schedule(adapter);
+	}
+}
+
+
+static void ngbe_handle_phy_event(struct ngbe_hw *hw)
+{
+	struct ngbe_adapter *adapter = hw->back;
+	u32 reg;
+
+	reg = rd32(hw, NGBE_GPIO_INTSTATUS);
+	wr32(hw, NGBE_GPIO_EOI, reg);
+	TCALL(hw, phy.ops.check_event);
+	adapter->lsc_int++;
+	adapter->link_check_timeout = jiffies;
+	if (!test_bit(__NGBE_DOWN, &adapter->state)) {
+		ngbe_service_event_schedule(adapter);
+	}
+}
+
+/**
+ * ngbe_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+void ngbe_irq_enable(struct ngbe_adapter *adapter, bool queues, bool flush)
+{
+	u32 mask = 0;
+
+	/* enable misc interrupt */
+	mask = NGBE_PX_MISC_IEN_MASK;
+
+	if (adapter->flags2 & NGBE_FLAG2_TEMP_SENSOR_CAPABLE)
+		mask |= NGBE_PX_MISC_IEN_OVER_HEAT;
+
+	mask |= NGBE_PX_MISC_IEN_TIMESYNC;
+
+	wr32(&adapter->hw, NGBE_GPIO_DDR, 0x1);
+	wr32(&adapter->hw, NGBE_GPIO_INTEN, 0x3);
+	wr32(&adapter->hw, NGBE_GPIO_INTTYPE_LEVEL, 0x0);
+	if (adapter->hw.phy.type == ngbe_phy_yt8521s_sfi)
+		wr32(&adapter->hw, NGBE_GPIO_POLARITY, 0x0);
+	else
+		wr32(&adapter->hw, NGBE_GPIO_POLARITY, 0x3);
+
+	if (adapter->hw.phy.type == ngbe_phy_yt8521s_sfi)
+		mask |= NGBE_PX_MISC_IEN_GPIO;
+
+	wr32(&adapter->hw, NGBE_PX_MISC_IEN, mask);
+
+	/* unmask interrupt */
+	if (queues)
+		ngbe_intr_enable(&adapter->hw, NGBE_INTR_ALL);
+	else {
+		if (!(adapter->flags2 & NGBE_FLAG2_SRIOV_MISC_IRQ_REMAP))
+			ngbe_intr_enable(&adapter->hw, NGBE_INTR_MISC(adapter));
+		else
+			ngbe_intr_enable(&adapter->hw, NGBE_INTR_MISC_VMDQ(adapter));
+	}
+
+	/* flush configuration */
+	if (flush)
+		NGBE_WRITE_FLUSH(&adapter->hw);
+}
+
+static irqreturn_t ngbe_msix_other(int __always_unused irq, void *data)
+{
+	struct ngbe_adapter *adapter = data;
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 eicr;
+	u32 ecc;
+	u16 pci_val = 0;
+
+	eicr = ngbe_misc_isb(adapter, NGBE_ISB_MISC);
+	if (eicr & (NGBE_PX_MISC_IC_PHY | NGBE_PX_MISC_IC_GPIO))
+		ngbe_handle_phy_event(hw);
+
+	if (eicr & NGBE_PX_MISC_IC_VF_MBOX)
+		ngbe_msg_task(adapter);
+
+	if (eicr & NGBE_PX_MISC_IC_PCIE_REQ_ERR) {
+		ERROR_REPORT1(NGBE_ERROR_POLLING,
+			"lan id %d, PCIe request error founded.\n", hw->bus.lan_id);
+
+		pci_read_config_word(adapter->pdev, PCI_VENDOR_ID, &pci_val);
+		ERROR_REPORT1(NGBE_ERROR_POLLING, "pci vendor id is 0x%x\n", pci_val);
+
+		pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_val);
+		ERROR_REPORT1(NGBE_ERROR_POLLING, "pci command reg is 0x%x.\n", pci_val);
+
+		if (hw->bus.lan_id == 0) {
+			adapter->flags2 |= NGBE_FLAG2_PCIE_NEED_RECOVER;
+			ngbe_service_event_schedule(adapter);
+		} else
+			wr32(&adapter->hw, NGBE_MIS_PF_SM, 1);
+	}
+
+	if (eicr & NGBE_PX_MISC_IC_INT_ERR) {
+		e_info(link, "Received unrecoverable ECC Err,"
+		       "initiating reset.\n");
+		ecc = rd32(hw, NGBE_MIS_ST);
+		e_info(link, "ecc error status is 0x%08x\n", ecc);
+		if (((ecc & NGBE_MIS_ST_LAN0_ECC) && (hw->bus.lan_id == 0)) ||
+		    ((ecc & NGBE_MIS_ST_LAN1_ECC) && (hw->bus.lan_id == 1)))
+			adapter->flags2 |= NGBE_FLAG2_DEV_RESET_REQUESTED;
+
+		ngbe_service_event_schedule(adapter);
+	}
+	if (eicr & NGBE_PX_MISC_IC_DEV_RST) {
+		adapter->flags2 |= NGBE_FLAG2_RESET_INTR_RECEIVED;
+		ngbe_service_event_schedule(adapter);
+	}
+	if ((eicr & NGBE_PX_MISC_IC_STALL) ||
+		(eicr & NGBE_PX_MISC_IC_ETH_EVENT)) {
+		adapter->flags2 |= NGBE_FLAG2_PF_RESET_REQUESTED;
+		ngbe_service_event_schedule(adapter);
+	}
+
+	ngbe_check_overtemp_event(adapter, eicr);
+
+	if (unlikely(eicr & NGBE_PX_MISC_IC_TIMESYNC))
+		ngbe_ptp_check_pps_event(adapter);
+
+	/* re-enable the original interrupt state, no lsc, no queues */
+	if (!test_bit(__NGBE_DOWN, &adapter->state))
+		ngbe_irq_enable(adapter, false, false);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ngbe_msix_clean_rings(int __always_unused irq, void *data)
+{
+	struct ngbe_q_vector *q_vector = data;
+
+	/* EIAM disabled interrupts (on this vector) for us */
+
+	if (q_vector->rx.ring || q_vector->tx.ring)
+		napi_schedule_irqoff(&q_vector->napi);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ngbe_poll - NAPI polling RX/TX cleanup routine
+ * @napi: napi struct with our devices info in it
+ * @budget: amount of work driver is allowed to do this pass, in packets
+ *
+ * This function will clean all queues associated with a q_vector.
+ **/
+int ngbe_poll(struct napi_struct *napi, int budget)
+{
+	struct ngbe_q_vector *q_vector =
+			       container_of(napi, struct ngbe_q_vector, napi);
+	struct ngbe_adapter *adapter = q_vector->adapter;
+	struct ngbe_ring *ring;
+	int per_ring_budget;
+	bool clean_complete = true;
+
+	ngbe_for_each_ring(ring, q_vector->tx) {
+		if (!ngbe_clean_tx_irq(q_vector, ring))
+			clean_complete = false;
+	}
+
+	/* Exit if we are called by netpoll */
+	if (budget <= 0)
+		return budget;
+
+	/* attempt to distribute budget to each queue fairly, but don't allow
+	 * the budget to go below 1 because we'll exit polling */
+	if (q_vector->rx.count > 1)
+		per_ring_budget = max(budget/q_vector->rx.count, 1);
+	else
+		per_ring_budget = budget;
+
+	ngbe_for_each_ring(ring, q_vector->rx) {
+		int cleaned = ngbe_clean_rx_irq(q_vector, ring,
+						per_ring_budget);
+
+		if (cleaned >= per_ring_budget)
+			clean_complete = false;
+	}
+
+	/* If all work not completed, return budget and keep polling */
+	if (!clean_complete)
+		return budget;
+
+	/* all work done, exit the polling mode */
+	napi_complete(napi);
+	if (!test_bit(__NGBE_DOWN, &adapter->state))
+		ngbe_intr_enable(&adapter->hw,
+			NGBE_INTR_Q(q_vector->v_idx));
+
+	return 0;
+}
+
+/**
+ * ngbe_request_msix_irqs - Initialize MSI-X interrupts
+ * @adapter: board private structure
+ *
+ * ngbe_request_msix_irqs allocates MSI-X vectors and requests
+ * interrupts from the kernel.
+ **/
+static int ngbe_request_msix_irqs(struct ngbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	int vector, err;
+	int ri = 0, ti = 0;
+
+	for (vector = 0; vector < adapter->num_q_vectors; vector++) {
+		struct ngbe_q_vector *q_vector = adapter->q_vector[vector];
+		struct msix_entry *entry = &adapter->msix_entries[vector];
+
+		if (q_vector->tx.ring && q_vector->rx.ring) {
+			snprintf(q_vector->name, sizeof(q_vector->name) - 1,
+				 "%s-TxRx-%d", netdev->name, ri++);
+			ti++;
+		} else if (q_vector->rx.ring) {
+			snprintf(q_vector->name, sizeof(q_vector->name) - 1,
+				 "%s-rx-%d", netdev->name, ri++);
+		} else if (q_vector->tx.ring) {
+			snprintf(q_vector->name, sizeof(q_vector->name) - 1,
+				 "%s-tx-%d", netdev->name, ti++);
+		} else {
+			/* skip this unused q_vector */
+			continue;
+		}
+		err = request_irq(entry->vector, &ngbe_msix_clean_rings, 0,
+				  q_vector->name, q_vector);
+		if (err) {
+			e_err(probe, "request_irq failed for MSIX interrupt"
+			      " '%s' Error: %d\n", q_vector->name, err);
+			goto free_queue_irqs;
+		}
+	}
+
+	if (adapter->flags2 & NGBE_FLAG2_SRIOV_MISC_IRQ_REMAP)
+		vector += adapter->ring_feature[RING_F_VMDQ].offset;
+
+	err = request_irq(adapter->msix_entries[vector].vector,
+			  ngbe_msix_other, 0, netdev->name, adapter);
+
+	if (adapter->flags2 & NGBE_FLAG2_SRIOV_MISC_IRQ_REMAP)
+		vector -= adapter->ring_feature[RING_F_VMDQ].offset;
+
+	if (err) {
+		e_err(probe, "request_irq for msix_other failed: %d\n", err);
+		goto free_queue_irqs;
+	}
+
+	return 0;
+
+free_queue_irqs:
+	while (vector) {
+		vector--;
+
+		irq_set_affinity_hint(adapter->msix_entries[vector].vector,
+				      NULL);
+
+		free_irq(adapter->msix_entries[vector].vector,
+			 adapter->q_vector[vector]);
+	}
+	adapter->flags &= ~NGBE_FLAG_MSIX_ENABLED;
+	pci_disable_msix(adapter->pdev);
+	kfree(adapter->msix_entries);
+	adapter->msix_entries = NULL;
+	return err;
+}
+
+/**
+ * ngbe_intr - legacy mode Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t ngbe_intr(int __always_unused irq, void *data)
+{
+	struct ngbe_adapter *adapter = data;
+	struct ngbe_hw *hw = &adapter->hw;
+	struct ngbe_q_vector *q_vector = adapter->q_vector[0];
+	u32 eicr;
+	u32 eicr_misc;
+	u32 ecc = 0;
+
+	eicr = ngbe_misc_isb(adapter, NGBE_ISB_VEC0);
+	if (!eicr) {
+		/*
+		 * shared interrupt alert!
+		 * the interrupt that we masked before the EICR read.
+		 */
+		if (!test_bit(__NGBE_DOWN, &adapter->state))
+			ngbe_irq_enable(adapter, true, true);
+		return IRQ_NONE;        /* Not our interrupt */
+	}
+	adapter->isb_mem[NGBE_ISB_VEC0] = 0;
+	if (!(adapter->flags & NGBE_FLAG_MSI_ENABLED))
+		wr32(&(adapter->hw), NGBE_PX_INTA, 1);
+
+	eicr_misc = ngbe_misc_isb(adapter, NGBE_ISB_MISC);
+	if (eicr_misc & (NGBE_PX_MISC_IC_PHY | NGBE_PX_MISC_IC_GPIO))
+		ngbe_handle_phy_event(hw);
+
+	if (eicr_misc & NGBE_PX_MISC_IC_INT_ERR) {
+		e_info(link, "Received unrecoverable ECC Err,"
+			"initiating reset.\n");
+		ecc = rd32(hw, NGBE_MIS_ST);
+		e_info(link, "ecc error status is 0x%08x\n", ecc);
+		adapter->flags2 |= NGBE_FLAG2_DEV_RESET_REQUESTED;
+		ngbe_service_event_schedule(adapter);
+	}
+
+	if (eicr_misc & NGBE_PX_MISC_IC_DEV_RST) {
+		adapter->flags2 |= NGBE_FLAG2_RESET_INTR_RECEIVED;
+		ngbe_service_event_schedule(adapter);
+	}
+	ngbe_check_overtemp_event(adapter, eicr_misc);
+
+	if (unlikely(eicr_misc & NGBE_PX_MISC_IC_TIMESYNC))
+		ngbe_ptp_check_pps_event(adapter);
+
+	adapter->isb_mem[NGBE_ISB_MISC] = 0;
+	/* would disable interrupts here but it is auto disabled */
+	napi_schedule_irqoff(&q_vector->napi);
+
+	/*
+	 * re-enable link(maybe) and non-queue interrupts, no flush.
+	 * ngbe_poll will re-enable the queue interrupts
+	 */
+	if (!test_bit(__NGBE_DOWN, &adapter->state))
+		ngbe_irq_enable(adapter, false, false);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ngbe_request_irq - initialize interrupts
+ * @adapter: board private structure
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static int ngbe_request_irq(struct ngbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	int err;
+
+	if (adapter->flags & NGBE_FLAG_MSIX_ENABLED)
+		err = ngbe_request_msix_irqs(adapter);
+	else if (adapter->flags & NGBE_FLAG_MSI_ENABLED)
+		err = request_irq(adapter->pdev->irq, &ngbe_intr, 0,
+				  netdev->name, adapter);
+	else
+		err = request_irq(adapter->pdev->irq, &ngbe_intr, IRQF_SHARED,
+				  netdev->name, adapter);
+
+	if (err)
+		e_err(probe, "request_irq failed, Error %d\n", err);
+
+	return err;
+}
+
+static void ngbe_free_irq(struct ngbe_adapter *adapter)
+{
+	int vector;
+
+	if (!(adapter->flags & NGBE_FLAG_MSIX_ENABLED)) {
+		free_irq(adapter->pdev->irq, adapter);
+		return;
+	}
+
+	for (vector = 0; vector < adapter->num_q_vectors; vector++) {
+		struct ngbe_q_vector *q_vector = adapter->q_vector[vector];
+		struct msix_entry *entry = &adapter->msix_entries[vector];
+
+		/* free only the irqs that were actually requested */
+		if (!q_vector->rx.ring && !q_vector->tx.ring)
+			continue;
+
+		/* clear the affinity_mask in the IRQ descriptor */
+		irq_set_affinity_hint(entry->vector, NULL);
+
+		free_irq(entry->vector, q_vector);
+	}
+
+	if (adapter->flags2 & NGBE_FLAG2_SRIOV_MISC_IRQ_REMAP) {
+		free_irq(
+			adapter->msix_entries[vector + adapter->ring_feature[RING_F_VMDQ].offset].vector,
+			adapter);
+	} else
+		free_irq(adapter->msix_entries[vector++].vector, adapter);
+}
+
+/**
+ * ngbe_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+void ngbe_irq_disable(struct ngbe_adapter *adapter)
+{
+	wr32(&adapter->hw, NGBE_PX_MISC_IEN, 0);
+	ngbe_intr_disable(&adapter->hw, NGBE_INTR_ALL);
+
+	NGBE_WRITE_FLUSH(&adapter->hw);
+	if (adapter->flags & NGBE_FLAG_MSIX_ENABLED) {
+		int vector;
+
+		for (vector = 0; vector < adapter->num_q_vectors; vector++)
+			synchronize_irq(adapter->msix_entries[vector].vector);
+
+		synchronize_irq(adapter->msix_entries[vector++].vector);
+	} else {
+		synchronize_irq(adapter->pdev->irq);
+	}
+}
+
+/**
+ * ngbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts
+ *
+ **/
+static void ngbe_configure_msi_and_legacy(struct ngbe_adapter *adapter)
+{
+	struct ngbe_q_vector *q_vector = adapter->q_vector[0];
+	struct ngbe_ring *ring;
+
+	ngbe_write_eitr(q_vector);
+
+	ngbe_for_each_ring(ring, q_vector->rx)
+		ngbe_set_ivar(adapter, 0, ring->reg_idx, 0);
+
+	ngbe_for_each_ring(ring, q_vector->tx)
+		ngbe_set_ivar(adapter, 1, ring->reg_idx, 0);
+
+	ngbe_set_ivar(adapter, -1, 0, 1);
+
+	e_info(hw, "Legacy interrupt IVAR setup done\n");
+}
+
+/**
+ * ngbe_configure_tx_ring - Configure Tx ring after Reset
+ * @adapter: board private structure
+ * @ring: structure containing ring specific data
+ *
+ * Configure the Tx descriptor ring after a reset.
+ **/
+void ngbe_configure_tx_ring(struct ngbe_adapter *adapter,
+			     struct ngbe_ring *ring)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u64 tdba = ring->dma;
+	int wait_loop = 10;
+	u32 txdctl = NGBE_PX_TR_CFG_ENABLE;
+	u8 reg_idx = ring->reg_idx;
+
+	/* disable queue to avoid issues while updating state */
+	wr32(hw, NGBE_PX_TR_CFG(reg_idx), NGBE_PX_TR_CFG_SWFLSH);
+	NGBE_WRITE_FLUSH(hw);
+
+	wr32(hw, NGBE_PX_TR_BAL(reg_idx), tdba & DMA_BIT_MASK(32));
+	wr32(hw, NGBE_PX_TR_BAH(reg_idx), tdba >> 32);
+
+	/* reset head and tail pointers */
+	wr32(hw, NGBE_PX_TR_RP(reg_idx), 0);
+	wr32(hw, NGBE_PX_TR_WP(reg_idx), 0);
+	ring->tail = adapter->io_addr + NGBE_PX_TR_WP(reg_idx);
+
+	/* reset ntu and ntc to place SW in sync with hardwdare */
+	ring->next_to_clean = 0;
+	ring->next_to_use = 0;
+
+	txdctl |= NGBE_RING_SIZE(ring) << NGBE_PX_TR_CFG_TR_SIZE_SHIFT;
+
+	/*
+	 * set WTHRESH to encourage burst writeback, it should not be set
+	 * higher than 1 when:
+	 * - ITR is 0 as it could cause false TX hangs
+	 * - ITR is set to > 100k int/sec and BQL is enabled
+	 *
+	 * In order to avoid issues WTHRESH + PTHRESH should always be equal
+	 * to or less than the number of on chip descriptors, which is
+	 * currently 40.
+	 */
+	txdctl |= 0x20 << NGBE_PX_TR_CFG_WTHRESH_SHIFT;
+	/*
+	 * Setting PTHRESH to 32 both improves performance
+	 * and avoids a TX hang with DFP enabled
+	 */
+
+	/* initialize XPS */
+	if (!test_and_set_bit(__NGBE_TX_XPS_INIT_DONE, &ring->state)) {
+		struct ngbe_q_vector *q_vector = ring->q_vector;
+
+		if (q_vector)
+			netif_set_xps_queue(adapter->netdev,
+					    &q_vector->affinity_mask,
+					    ring->queue_index);
+	}
+
+	clear_bit(__NGBE_HANG_CHECK_ARMED, &ring->state);
+
+	/* enable queue */
+	wr32(hw, NGBE_PX_TR_CFG(reg_idx), txdctl);
+
+	/* poll to verify queue is enabled */
+	do {
+		msleep(1);
+		txdctl = rd32(hw, NGBE_PX_TR_CFG(reg_idx));
+	} while (--wait_loop && !(txdctl & NGBE_PX_TR_CFG_ENABLE));
+	if (!wait_loop)
+		e_err(drv, "Could not enable Tx Queue %d\n", reg_idx);
+}
+
+/**
+ * ngbe_configure_tx - Configure Transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+static void ngbe_configure_tx(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 i;
+
+	/* TDM_CTL.TE must be before Tx queues are enabled */
+	wr32m(hw, NGBE_TDM_CTL,
+		NGBE_TDM_CTL_TE, NGBE_TDM_CTL_TE);
+
+	/* Setup the HW Tx Head and Tail descriptor pointers */
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		ngbe_configure_tx_ring(adapter, adapter->tx_ring[i]);
+
+	wr32m(hw, NGBE_TSEC_BUF_AE, 0x3FF, 0x10);
+	wr32m(hw, NGBE_TSEC_CTL, 0x2, 0);
+
+	wr32m(hw, NGBE_TSEC_CTL, 0x1, 1);
+
+	/* enable mac transmitter */
+	wr32m(hw, NGBE_MAC_TX_CFG,
+		NGBE_MAC_TX_CFG_TE, NGBE_MAC_TX_CFG_TE);
+}
+
+static void ngbe_enable_rx_drop(struct ngbe_adapter *adapter,
+				 struct ngbe_ring *ring)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u16 reg_idx = ring->reg_idx;
+
+	u32 srrctl = rd32(hw, NGBE_PX_RR_CFG(reg_idx));
+
+	srrctl |= NGBE_PX_RR_CFG_DROP_EN;
+
+	wr32(hw, NGBE_PX_RR_CFG(reg_idx), srrctl);
+}
+
+static void ngbe_disable_rx_drop(struct ngbe_adapter *adapter,
+				  struct ngbe_ring *ring)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u16 reg_idx = ring->reg_idx;
+
+	u32 srrctl = rd32(hw, NGBE_PX_RR_CFG(reg_idx));
+
+	srrctl &= ~NGBE_PX_RR_CFG_DROP_EN;
+
+	wr32(hw, NGBE_PX_RR_CFG(reg_idx), srrctl);
+}
+
+void ngbe_set_rx_drop_en(struct ngbe_adapter *adapter)
+{
+	int i;
+
+	/*
+	 * We should set the drop enable bit if:
+	 *  SR-IOV is enabled
+	 *   or
+	 *  Number of Rx queues > 1 and flow control is disabled
+	 *
+	 *  This allows us to avoid head of line blocking for security
+	 *  and performance reasons.
+	 */
+	if (adapter->num_vfs || (adapter->num_rx_queues > 1 &&
+	    !(adapter->hw.fc.current_mode & ngbe_fc_tx_pause))) {
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			ngbe_enable_rx_drop(adapter, adapter->rx_ring[i]);
+	} else {
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			ngbe_disable_rx_drop(adapter, adapter->rx_ring[i]);
+	}
+}
+
+static void ngbe_configure_srrctl(struct ngbe_adapter *adapter,
+	struct ngbe_ring *rx_ring)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 srrctl;
+	u16 reg_idx = rx_ring->reg_idx;
+
+	srrctl = rd32m(hw, NGBE_PX_RR_CFG(reg_idx),
+			~(NGBE_PX_RR_CFG_RR_HDR_SZ |
+			  NGBE_PX_RR_CFG_RR_BUF_SZ |
+			  NGBE_PX_RR_CFG_SPLIT_MODE));
+
+	/* configure header buffer length, needed for RSC */
+	srrctl |= NGBE_RX_HDR_SIZE << NGBE_PX_RR_CFG_BSIZEHDRSIZE_SHIFT;
+
+	/* configure the packet buffer length */
+	srrctl |= ngbe_rx_bufsz(rx_ring) >> NGBE_PX_RR_CFG_BSIZEPKT_SHIFT;
+	if (ring_is_hs_enabled(rx_ring))
+		srrctl |= NGBE_PX_RR_CFG_SPLIT_MODE;
+
+	wr32(hw, NGBE_PX_RR_CFG(reg_idx), srrctl);
+}
+
+/**
+ * Return a number of entries in the RSS indirection table
+ *
+ * @adapter: device handle
+ *
+ */
+u32 ngbe_rss_indir_tbl_entries(struct ngbe_adapter *adapter)
+{
+	if (adapter->flags & NGBE_FLAG_SRIOV_ENABLED)
+		return 64;
+	else
+		return 128;
+}
+
+/**
+ * Write the RETA table to HW
+ *
+ * @adapter: device handle
+ *
+ * Write the RSS redirection table stored in adapter.rss_indir_tbl[] to HW.
+ */
+void ngbe_store_reta(struct ngbe_adapter *adapter)
+{
+	u32 i, reta_entries = ngbe_rss_indir_tbl_entries(adapter);
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 reta = 0;
+	u8 *indir_tbl = adapter->rss_indir_tbl;
+
+	/* Write redirection table to HW */
+	for (i = 0; i < reta_entries; i++) {
+		reta |= indir_tbl[i] << (i & 0x3) * 8;
+		if ((i & 3) == 3) {
+			wr32(hw, NGBE_RDB_RSSTBL(i >> 2), reta);
+			reta = 0;
+		}
+	}
+}
+
+static void ngbe_setup_reta(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 i, j;
+	u32 reta_entries = ngbe_rss_indir_tbl_entries(adapter);
+	u16 rss_i = adapter->ring_feature[RING_F_RSS].indices;
+
+	/*
+	 * Program table for at least 2 queues w/ SR-IOV so that VFs can
+	 * make full use of any rings they may have.  We will use the
+	 * PSRTYPE register to control how many rings we use within the PF.
+	 */
+	if ((adapter->flags & NGBE_FLAG_SRIOV_ENABLED) && (rss_i < 2))
+		rss_i = 1;
+
+	/* Fill out hash function seeds */
+	for (i = 0; i < 10; i++)
+		wr32(hw, NGBE_RDB_RSSRK(i), adapter->rss_key[i]);
+
+	/* Fill out redirection table */
+	memset(adapter->rss_indir_tbl, 0, sizeof(adapter->rss_indir_tbl));
+
+	for (i = 0, j = 0; i < reta_entries; i++, j++) {
+		if (j == rss_i)
+			j = 0;
+
+		adapter->rss_indir_tbl[i] = j;
+	}
+
+	ngbe_store_reta(adapter);
+}
+
+static void ngbe_setup_mrqc(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 rss_field = 0;
+
+	/* VT, and RSS do not coexist at the same time */
+	if (adapter->flags & NGBE_FLAG_VMDQ_ENABLED) {
+		return;
+	}
+
+	/* Disable indicating checksum in descriptor, enables RSS hash */
+	wr32m(hw, NGBE_PSR_CTL,
+		NGBE_PSR_CTL_PCSD, NGBE_PSR_CTL_PCSD);
+
+	/* Perform hash on these packet types */
+	rss_field = NGBE_RDB_RA_CTL_RSS_IPV4 |
+		    NGBE_RDB_RA_CTL_RSS_IPV4_TCP |
+		    NGBE_RDB_RA_CTL_RSS_IPV6 |
+		    NGBE_RDB_RA_CTL_RSS_IPV6_TCP;
+
+	if (adapter->flags2 & NGBE_FLAG2_RSS_FIELD_IPV4_UDP)
+		rss_field |= NGBE_RDB_RA_CTL_RSS_IPV4_UDP;
+	if (adapter->flags2 & NGBE_FLAG2_RSS_FIELD_IPV6_UDP)
+		rss_field |= NGBE_RDB_RA_CTL_RSS_IPV6_UDP;
+
+	netdev_rss_key_fill(adapter->rss_key, sizeof(adapter->rss_key));
+
+	ngbe_setup_reta(adapter);
+
+	if (adapter->flags2 & NGBE_FLAG2_RSS_ENABLED)
+		rss_field |= NGBE_RDB_RA_CTL_RSS_EN;
+	wr32(hw, NGBE_RDB_RA_CTL, rss_field);
+}
+
+static void ngbe_rx_desc_queue_enable(struct ngbe_adapter *adapter,
+				       struct ngbe_ring *ring)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	int wait_loop = NGBE_MAX_RX_DESC_POLL;
+	u32 rxdctl;
+	u8 reg_idx = ring->reg_idx;
+
+	if (NGBE_REMOVED(hw->hw_addr))
+		return;
+
+	do {
+		msleep(1);
+		rxdctl = rd32(hw, NGBE_PX_RR_CFG(reg_idx));
+	} while (--wait_loop && !(rxdctl & NGBE_PX_RR_CFG_RR_EN));
+
+	if (!wait_loop) {
+		e_err(drv, "RXDCTL.ENABLE on Rx queue %d "
+		      "not set within the polling period\n", reg_idx);
+	}
+}
+
+/* disable the specified rx ring/queue */
+void ngbe_disable_rx_queue(struct ngbe_adapter *adapter,
+			    struct ngbe_ring *ring)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	int wait_loop = NGBE_MAX_RX_DESC_POLL;
+	u32 rxdctl;
+	u8 reg_idx = ring->reg_idx;
+
+	if (NGBE_REMOVED(hw->hw_addr))
+		return;
+
+	/* write value back with RXDCTL.ENABLE bit cleared */
+	wr32m(hw, NGBE_PX_RR_CFG(reg_idx),
+		NGBE_PX_RR_CFG_RR_EN, 0);
+
+	/* hardware may take up to 100us to actually disable rx queue */
+	do {
+		udelay(10);
+		rxdctl = rd32(hw, NGBE_PX_RR_CFG(reg_idx));
+	} while (--wait_loop && (rxdctl & NGBE_PX_RR_CFG_RR_EN));
+
+	if (!wait_loop) {
+		e_err(drv, "RXDCTL.ENABLE on Rx queue %d not cleared within "
+				   "the polling period\n", reg_idx);
+	}
+}
+
+void ngbe_configure_rx_ring(struct ngbe_adapter *adapter,
+			     struct ngbe_ring *ring)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u64 rdba = ring->dma;
+	u32 rxdctl;
+	u16 reg_idx = ring->reg_idx;
+
+	/* disable queue to avoid issues while updating state */
+	rxdctl = rd32(hw, NGBE_PX_RR_CFG(reg_idx));
+	ngbe_disable_rx_queue(adapter, ring);
+
+	wr32(hw, NGBE_PX_RR_BAL(reg_idx), rdba & DMA_BIT_MASK(32));
+	wr32(hw, NGBE_PX_RR_BAH(reg_idx), rdba >> 32);
+
+	if (ring->count == NGBE_MAX_RXD)
+		rxdctl |= 0 << NGBE_PX_RR_CFG_RR_SIZE_SHIFT;
+	else
+		rxdctl |= (ring->count / 128) << NGBE_PX_RR_CFG_RR_SIZE_SHIFT;
+
+	rxdctl |= 0x1 << NGBE_PX_RR_CFG_RR_THER_SHIFT;
+	wr32(hw, NGBE_PX_RR_CFG(reg_idx), rxdctl);
+
+	/* reset head and tail pointers */
+	wr32(hw, NGBE_PX_RR_RP(reg_idx), 0);
+	wr32(hw, NGBE_PX_RR_WP(reg_idx), 0);
+	ring->tail = adapter->io_addr + NGBE_PX_RR_WP(reg_idx);
+
+	/* reset ntu and ntc to place SW in sync with hardwdare */
+	ring->next_to_clean = 0;
+	ring->next_to_use = 0;
+	ring->next_to_alloc = 0;
+
+	ngbe_configure_srrctl(adapter, ring);
+
+	/* enable receive descriptor ring */
+	wr32m(hw, NGBE_PX_RR_CFG(reg_idx),
+		NGBE_PX_RR_CFG_RR_EN, NGBE_PX_RR_CFG_RR_EN);
+
+	ngbe_rx_desc_queue_enable(adapter, ring);
+	ngbe_alloc_rx_buffers(ring, ngbe_desc_unused(ring));
+}
+
+static void ngbe_setup_psrtype(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	int pool;
+
+	/* PSRTYPE must be initialized in adapters */
+	u32 psrtype = NGBE_RDB_PL_CFG_L4HDR |
+				NGBE_RDB_PL_CFG_L3HDR |
+				NGBE_RDB_PL_CFG_L2HDR |
+				NGBE_RDB_PL_CFG_TUN_OUTER_L2HDR |
+				NGBE_RDB_PL_CFG_TUN_TUNHDR;
+
+	for_each_set_bit(pool, &adapter->fwd_bitmask, NGBE_MAX_MACVLANS) {
+		wr32(hw, NGBE_RDB_PL_CFG(VMDQ_P(pool)), psrtype);
+	}
+}
+
+/**
+ * ngbe_configure_bridge_mode - common settings for configuring bridge mode
+ * @adapter - the private structure
+ *
+ * This function's purpose is to remove code duplication and configure some
+ * settings require to switch bridge modes.
+ **/
+static void ngbe_configure_bridge_mode(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+
+	if (adapter->flags & NGBE_FLAG_SRIOV_VEPA_BRIDGE_MODE) {
+		/* disable Tx loopback, rely on switch hairpin mode */
+		wr32m(hw, NGBE_PSR_CTL,
+			NGBE_PSR_CTL_SW_EN, 0);
+	} else {
+		/* enable Tx loopback for internal VF/PF communication */
+		wr32m(hw, NGBE_PSR_CTL,
+			NGBE_PSR_CTL_SW_EN, NGBE_PSR_CTL_SW_EN);
+	}
+}
+
+static void ngbe_configure_virtualization(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 i;
+	u8 vfe = 0;
+
+	if (!(adapter->flags & NGBE_FLAG_VMDQ_ENABLED))
+		return;
+
+	wr32m(hw, NGBE_PSR_VM_CTL,
+		NGBE_PSR_VM_CTL_POOL_MASK |
+		NGBE_PSR_VM_CTL_REPLEN,
+		VMDQ_P(0) << NGBE_PSR_VM_CTL_POOL_SHIFT |
+		NGBE_PSR_VM_CTL_REPLEN);
+
+	for_each_set_bit(i, &adapter->fwd_bitmask, NGBE_MAX_MACVLANS) {
+		/* accept untagged packets until a vlan tag is
+		 * specifically set for the VMDQ queue/pool
+		 */
+		wr32m(hw, NGBE_PSR_VM_L2CTL(i),
+			NGBE_PSR_VM_L2CTL_AUPE, NGBE_PSR_VM_L2CTL_AUPE);
+	}
+
+	vfe = 1 << (VMDQ_P(0));
+	/* Enable only the PF pools for Tx/Rx */
+	wr32(hw, NGBE_RDM_POOL_RE, vfe);
+	wr32(hw, NGBE_TDM_POOL_TE, vfe);
+
+	if (!(adapter->flags & NGBE_FLAG_SRIOV_ENABLED))
+		return;
+
+	/* configure default bridge settings */
+	ngbe_configure_bridge_mode(adapter);
+
+	/* Ensure LLDP and FC is set for Ethertype Antispoofing if we will be
+	 * calling set_ethertype_anti_spoofing for each VF in loop below.
+	 */
+	if (hw->mac.ops.set_ethertype_anti_spoofing) {
+		wr32(hw,
+			NGBE_PSR_ETYPE_SWC(NGBE_PSR_ETYPE_SWC_FILTER_LLDP),
+			(NGBE_PSR_ETYPE_SWC_FILTER_EN    | /* enable filter */
+			 NGBE_PSR_ETYPE_SWC_TX_ANTISPOOF |
+			 NGBE_ETH_P_LLDP));       /* LLDP eth procotol type */
+
+		wr32(hw,
+			NGBE_PSR_ETYPE_SWC(NGBE_PSR_ETYPE_SWC_FILTER_FC),
+			(NGBE_PSR_ETYPE_SWC_FILTER_EN    |
+			 NGBE_PSR_ETYPE_SWC_TX_ANTISPOOF |
+			 ETH_P_PAUSE));
+	}
+
+	for (i = 0; i < adapter->num_vfs; i++) {
+		if (!adapter->vfinfo[i].spoofchk_enabled)
+			ngbe_ndo_set_vf_spoofchk(adapter->netdev, i, false);
+		/* enable ethertype anti spoofing if hw supports it */
+		TCALL(hw, mac.ops.set_ethertype_anti_spoofing, true, i);
+	}
+}
+
+static void ngbe_set_rx_buffer_len(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	struct net_device *netdev = adapter->netdev;
+	u32 max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+	struct ngbe_ring *rx_ring;
+	int i;
+	u32 mhadd;
+
+	/* adjust max frame to be at least the size of a standard frame */
+	if (max_frame < (ETH_FRAME_LEN + ETH_FCS_LEN))
+		max_frame = (ETH_FRAME_LEN + ETH_FCS_LEN);
+
+	mhadd = rd32(hw, NGBE_PSR_MAX_SZ);
+	if (max_frame != mhadd) {
+		wr32(hw, NGBE_PSR_MAX_SZ, max_frame);
+	}
+
+	/*
+	 * Setup the HW Rx Head and Tail Descriptor Pointers and
+	 * the Base and Length of the Rx Descriptor Ring
+	 */
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		rx_ring = adapter->rx_ring[i];
+
+		if (adapter->flags & NGBE_FLAG_RX_HS_ENABLED) {
+			rx_ring->rx_buf_len = NGBE_RX_HDR_SIZE;
+			set_ring_hs_enabled(rx_ring);
+		} else
+			clear_ring_hs_enabled(rx_ring);
+	}
+}
+
+/**
+ * ngbe_configure_rx - Configure Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+static void ngbe_configure_rx(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	int i;
+	u32 rxctrl;
+
+	/* disable receives while setting up the descriptors */
+	TCALL(hw, mac.ops.disable_rx);
+
+	ngbe_setup_psrtype(adapter);
+
+	/* enable hw crc stripping */
+	wr32m(hw, NGBE_RSEC_CTL,
+		NGBE_RSEC_CTL_CRC_STRIP, NGBE_RSEC_CTL_CRC_STRIP);
+
+	/* Program registers for the distribution of queues */
+	ngbe_setup_mrqc(adapter);
+
+	/* set_rx_buffer_len must be called before ring initialization */
+	ngbe_set_rx_buffer_len(adapter);
+
+	/*
+	 * Setup the HW Rx Head and Tail Descriptor Pointers and
+	 * the Base and Length of the Rx Descriptor Ring
+	 */
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		ngbe_configure_rx_ring(adapter, adapter->rx_ring[i]);
+
+	rxctrl = rd32(hw, NGBE_RDB_PB_CTL);
+
+	/* enable all receives */
+	rxctrl |= NGBE_RDB_PB_CTL_PBEN;
+	TCALL(hw, mac.ops.enable_rx_dma, rxctrl);
+}
+
+static int ngbe_vlan_rx_add_vid(struct net_device *netdev,
+				 __always_unused __be16 proto, u16 vid)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+	int pool_ndx = VMDQ_P(0);
+
+	/* add VID to filter table */
+	if (hw->mac.ops.set_vfta) {
+		if (vid < VLAN_N_VID)
+			set_bit(vid, adapter->active_vlans);
+
+		TCALL(hw, mac.ops.set_vfta, vid, pool_ndx, true);
+		if (adapter->flags & NGBE_FLAG_VMDQ_ENABLED) {
+			int i;
+			/* enable vlan id for all pools */
+			for_each_set_bit(i, &adapter->fwd_bitmask,
+					 NGBE_MAX_MACVLANS)
+				TCALL(hw, mac.ops.set_vfta, vid,
+					   VMDQ_P(i), true);
+		}
+	}
+
+	return 0;
+}
+
+static int ngbe_vlan_rx_kill_vid(struct net_device *netdev,
+				  __always_unused __be16 proto, u16 vid)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+	int pool_ndx = VMDQ_P(0);
+
+	/* User is not allowed to remove vlan ID 0 */
+	if (!vid)
+		return 0;
+
+	/* remove VID from filter table */
+	if (hw->mac.ops.set_vfta) {
+		TCALL(hw, mac.ops.set_vfta, vid, pool_ndx, false);
+		if (adapter->flags & NGBE_FLAG_VMDQ_ENABLED) {
+			int i;
+			/* remove vlan id from all pools */
+			for_each_set_bit(i, &adapter->fwd_bitmask,
+					 NGBE_MAX_MACVLANS)
+				TCALL(hw, mac.ops.set_vfta, vid,
+					   VMDQ_P(i), false);
+		}
+	}
+
+	clear_bit(vid, adapter->active_vlans);
+	return 0;
+}
+
+/**
+ * ngbe_vlan_strip_disable - helper to disable vlan tag stripping
+ * @adapter: driver data
+ */
+void ngbe_vlan_strip_disable(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	int i, j;
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		struct ngbe_ring *ring = adapter->rx_ring[i];
+		if (ring->accel)
+			continue;
+		j = ring->reg_idx;
+		wr32m(hw, NGBE_PX_RR_CFG(j),
+			NGBE_PX_RR_CFG_VLAN, 0);
+	}
+}
+
+/**
+ * ngbe_vlan_strip_enable - helper to enable vlan tag stripping
+ * @adapter: driver data
+ */
+void ngbe_vlan_strip_enable(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	int i, j;
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		struct ngbe_ring *ring = adapter->rx_ring[i];
+		if (ring->accel)
+			continue;
+		j = ring->reg_idx;
+		wr32m(hw, NGBE_PX_RR_CFG(j),
+			NGBE_PX_RR_CFG_VLAN, NGBE_PX_RR_CFG_VLAN);
+	}
+}
+
+void ngbe_vlan_mode(struct net_device *netdev, u32 features)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	bool enable;
+
+	enable = !!(features & (NETIF_F_HW_VLAN_CTAG_RX));
+	if (enable)
+		/* enable VLAN tag insert/strip */
+		ngbe_vlan_strip_enable(adapter);
+	else
+		/* disable VLAN tag insert/strip */
+		ngbe_vlan_strip_disable(adapter);
+}
+
+static void ngbe_restore_vlan(struct ngbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	u16 vid;
+
+	ngbe_vlan_mode(netdev, netdev->features);
+
+	for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+		ngbe_vlan_rx_add_vid(netdev, htons(ETH_P_8021Q), vid);
+}
+
+static u8 *ngbe_addr_list_itr(struct ngbe_hw *hw,
+			       u8 **mc_addr_ptr, u32 *vmdq)
+{
+	struct netdev_hw_addr *mc_ptr;
+	u8 *addr = *mc_addr_ptr;
+	struct ngbe_adapter *adapter = hw->back;
+
+	/* VMDQ_P implicitely uses the adapter struct when CONFIG_PCI_IOV is
+	 * defined, so we have to wrap the pointer above correctly to prevent
+	 * a warning.
+	 */
+	*vmdq = VMDQ_P(0);
+
+	mc_ptr = container_of(addr, struct netdev_hw_addr, addr[0]);
+	if (mc_ptr->list.next) {
+		struct netdev_hw_addr *ha;
+
+		ha = list_entry(mc_ptr->list.next, struct netdev_hw_addr, list);
+		*mc_addr_ptr = ha->addr;
+	} else
+		*mc_addr_ptr = NULL;
+
+	return addr;
+}
+
+/**
+ * ngbe_write_mc_addr_list - write multicast addresses to MTA
+ * @netdev: network interface device structure
+ *
+ * Writes multicast address list to the MTA hash table.
+ * Returns: -ENOMEM on failure
+ *                0 on no addresses written
+ *                X on writing X addresses to MTA
+ **/
+int ngbe_write_mc_addr_list(struct net_device *netdev)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+	struct netdev_hw_addr *ha;
+	u8  *addr_list = NULL;
+	int addr_count = 0;
+
+	if (!hw->mac.ops.update_mc_addr_list)
+		return -ENOMEM;
+
+	if (!netif_running(netdev))
+		return 0;
+
+	if (netdev_mc_empty(netdev)) {
+		TCALL(hw, mac.ops.update_mc_addr_list, NULL, 0,
+						ngbe_addr_list_itr, true);
+	} else {
+		ha = list_first_entry(&netdev->mc.list,
+				      struct netdev_hw_addr, list);
+		addr_list = ha->addr;
+		addr_count = netdev_mc_count(netdev);
+		TCALL(hw, mac.ops.update_mc_addr_list, addr_list, addr_count,
+						ngbe_addr_list_itr, true);
+	}
+
+#ifdef CONFIG_PCI_IOV
+	ngbe_restore_vf_multicasts(adapter);
+#endif
+	return addr_count;
+}
+
+void ngbe_full_sync_mac_table(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	int i;
+	for (i = 0; i < hw->mac.num_rar_entries; i++) {
+		if (adapter->mac_table[i].state & NGBE_MAC_STATE_IN_USE) {
+			TCALL(hw, mac.ops.set_rar, i,
+				adapter->mac_table[i].addr,
+				adapter->mac_table[i].pools,
+				NGBE_PSR_MAC_SWC_AD_H_AV);
+		} else {
+			TCALL(hw, mac.ops.clear_rar, i);
+		}
+		adapter->mac_table[i].state &= ~(NGBE_MAC_STATE_MODIFIED);
+	}
+}
+
+static void ngbe_sync_mac_table(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	int i;
+	for (i = 0; i < hw->mac.num_rar_entries; i++) {
+		if (adapter->mac_table[i].state & NGBE_MAC_STATE_MODIFIED) {
+			if (adapter->mac_table[i].state &
+					NGBE_MAC_STATE_IN_USE) {
+				TCALL(hw, mac.ops.set_rar, i,
+						adapter->mac_table[i].addr,
+						adapter->mac_table[i].pools,
+						NGBE_PSR_MAC_SWC_AD_H_AV);
+			} else {
+				TCALL(hw, mac.ops.clear_rar, i);
+			}
+			adapter->mac_table[i].state &=
+				~(NGBE_MAC_STATE_MODIFIED);
+		}
+	}
+}
+
+int ngbe_available_rars(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 i, count = 0;
+
+	for (i = 0; i < hw->mac.num_rar_entries; i++) {
+		if (adapter->mac_table[i].state == 0)
+			count++;
+	}
+	return count;
+}
+
+/* this function destroys the first RAR entry */
+static void ngbe_mac_set_default_filter(struct ngbe_adapter *adapter,
+					 u8 *addr)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+
+	memcpy(&adapter->mac_table[0].addr, addr, ETH_ALEN);
+	adapter->mac_table[0].pools = 1ULL << VMDQ_P(0);
+	adapter->mac_table[0].state = (NGBE_MAC_STATE_DEFAULT |
+				       NGBE_MAC_STATE_IN_USE);
+	TCALL(hw, mac.ops.set_rar, 0, adapter->mac_table[0].addr,
+			    adapter->mac_table[0].pools,
+			    NGBE_PSR_MAC_SWC_AD_H_AV);
+}
+
+int ngbe_add_mac_filter(struct ngbe_adapter *adapter, u8 *addr, u16 pool)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 i;
+
+	if (is_zero_ether_addr(addr))
+		return -EINVAL;
+
+	for (i = 0; i < hw->mac.num_rar_entries; i++) {
+		if (adapter->mac_table[i].state & NGBE_MAC_STATE_IN_USE) {
+			continue;
+		}
+		adapter->mac_table[i].state |= (NGBE_MAC_STATE_MODIFIED |
+						NGBE_MAC_STATE_IN_USE);
+		memcpy(adapter->mac_table[i].addr, addr, ETH_ALEN);
+		adapter->mac_table[i].pools = (1ULL << pool);
+		ngbe_sync_mac_table(adapter);
+		return i;
+	}
+	return -ENOMEM;
+}
+
+static void ngbe_flush_sw_mac_table(struct ngbe_adapter *adapter)
+{
+	u32 i;
+	struct ngbe_hw *hw = &adapter->hw;
+
+	for (i = 0; i < hw->mac.num_rar_entries; i++) {
+		adapter->mac_table[i].state |= NGBE_MAC_STATE_MODIFIED;
+		adapter->mac_table[i].state &= ~NGBE_MAC_STATE_IN_USE;
+		memset(adapter->mac_table[i].addr, 0, ETH_ALEN);
+		adapter->mac_table[i].pools = 0;
+	}
+	ngbe_sync_mac_table(adapter);
+}
+
+int ngbe_del_mac_filter(struct ngbe_adapter *adapter, u8 *addr, u16 pool)
+{
+	/* search table for addr, if found, set to 0 and sync */
+	u32 i;
+	struct ngbe_hw *hw = &adapter->hw;
+
+	if (is_zero_ether_addr(addr))
+		return -EINVAL;
+
+	for (i = 0; i < hw->mac.num_rar_entries; i++) {
+		if (ether_addr_equal(addr, adapter->mac_table[i].addr) &&
+		    adapter->mac_table[i].pools | (1ULL << pool)) {
+			adapter->mac_table[i].state |= NGBE_MAC_STATE_MODIFIED;
+			adapter->mac_table[i].state &= ~NGBE_MAC_STATE_IN_USE;
+			memset(adapter->mac_table[i].addr, 0, ETH_ALEN);
+			adapter->mac_table[i].pools = 0;
+			ngbe_sync_mac_table(adapter);
+			return 0;
+		}
+	}
+	return -ENOMEM;
+}
+
+/**
+ * ngbe_write_uc_addr_list - write unicast addresses to RAR table
+ * @netdev: network interface device structure
+ *
+ * Writes unicast address list to the RAR table.
+ * Returns: -ENOMEM on failure/insufficient address space
+ *                0 on no addresses written
+ *                X on writing X addresses to the RAR table
+ **/
+int ngbe_write_uc_addr_list(struct net_device *netdev, int pool)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	int count = 0;
+
+	/* return ENOMEM indicating insufficient memory for addresses */
+	if (netdev_uc_count(netdev) > ngbe_available_rars(adapter))
+		return -ENOMEM;
+
+	if (!netdev_uc_empty(netdev)) {
+		struct netdev_hw_addr *ha;
+		netdev_for_each_uc_addr(ha, netdev) {
+			ngbe_del_mac_filter(adapter, ha->addr, pool);
+			ngbe_add_mac_filter(adapter, ha->addr, pool);
+			count++;
+		}
+	}
+	return count;
+}
+
+/**
+ * ngbe_set_rx_mode - Unicast, Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_rx_method entry point is called whenever the unicast/multicast
+ * address list or the network interface flags are updated.  This routine is
+ * responsible for configuring the hardware for proper unicast, multicast and
+ * promiscuous mode.
+ **/
+void ngbe_set_rx_mode(struct net_device *netdev)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 fctrl, vmolr, vlnctrl;
+	int count;
+
+	/* Check for Promiscuous and All Multicast modes */
+	fctrl = rd32m(hw, NGBE_PSR_CTL,
+			~(NGBE_PSR_CTL_UPE | NGBE_PSR_CTL_MPE));
+	vmolr = rd32m(hw, NGBE_PSR_VM_L2CTL(VMDQ_P(0)),
+			~(NGBE_PSR_VM_L2CTL_UPE |
+			  NGBE_PSR_VM_L2CTL_MPE |
+			  NGBE_PSR_VM_L2CTL_ROPE |
+			  NGBE_PSR_VM_L2CTL_ROMPE));
+	vlnctrl = rd32m(hw, NGBE_PSR_VLAN_CTL,
+			~(NGBE_PSR_VLAN_CTL_VFE |
+			  NGBE_PSR_VLAN_CTL_CFIEN));
+
+	/* set all bits that we expect to always be set */
+	fctrl |= NGBE_PSR_CTL_BAM | NGBE_PSR_CTL_MFE;
+	vmolr |= NGBE_PSR_VM_L2CTL_BAM |
+			 NGBE_PSR_VM_L2CTL_AUPE |
+			 NGBE_PSR_VM_L2CTL_VACC;
+	vlnctrl |= NGBE_PSR_VLAN_CTL_VFE;
+
+	hw->addr_ctrl.user_set_promisc = false;
+	if (netdev->flags & IFF_PROMISC) {
+		hw->addr_ctrl.user_set_promisc = true;
+		fctrl |= (NGBE_PSR_CTL_UPE | NGBE_PSR_CTL_MPE);
+		/* pf don't want packets routing to vf, so clear UPE */
+		vmolr |= NGBE_PSR_VM_L2CTL_MPE;
+		vlnctrl &= ~NGBE_PSR_VLAN_CTL_VFE;
+	}
+
+	if (netdev->flags & IFF_ALLMULTI) {
+		fctrl |= NGBE_PSR_CTL_MPE;
+		vmolr |= NGBE_PSR_VM_L2CTL_MPE;
+	}
+
+	/* This is useful for sniffing bad packets. */
+	if (netdev->features & NETIF_F_RXALL) {
+		vmolr |= (NGBE_PSR_VM_L2CTL_UPE | NGBE_PSR_VM_L2CTL_MPE);
+		vlnctrl &= ~NGBE_PSR_VLAN_CTL_VFE;
+		/* receive bad packets */
+		wr32m(hw, NGBE_RSEC_CTL,
+			NGBE_RSEC_CTL_SAVE_MAC_ERR,
+			NGBE_RSEC_CTL_SAVE_MAC_ERR);
+	} else {
+		vmolr |= NGBE_PSR_VM_L2CTL_ROPE | NGBE_PSR_VM_L2CTL_ROMPE;
+	}
+
+	/*
+	 * Write addresses to available RAR registers, if there is not
+	 * sufficient space to store all the addresses then enable
+	 * unicast promiscuous mode
+	 */
+	count = ngbe_write_uc_addr_list(netdev, VMDQ_P(0));
+	if (count < 0) {
+		vmolr &= ~NGBE_PSR_VM_L2CTL_ROPE;
+		vmolr |= NGBE_PSR_VM_L2CTL_UPE;
+	}
+
+	/*
+	 * Write addresses to the MTA, if the attempt fails
+	 * then we should just turn on promiscuous mode so
+	 * that we can at least receive multicast traffic
+	 */
+	count = ngbe_write_mc_addr_list(netdev);
+	if (count < 0) {
+		vmolr &= ~NGBE_PSR_VM_L2CTL_ROMPE;
+		vmolr |= NGBE_PSR_VM_L2CTL_MPE;
+	}
+
+	wr32(hw, NGBE_PSR_VLAN_CTL, vlnctrl);
+	wr32(hw, NGBE_PSR_CTL, fctrl);
+	wr32(hw, NGBE_PSR_VM_L2CTL(VMDQ_P(0)), vmolr);
+
+	if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX)
+		ngbe_vlan_strip_enable(adapter);
+	else
+		ngbe_vlan_strip_disable(adapter);
+}
+
+static void ngbe_napi_enable_all(struct ngbe_adapter *adapter)
+{
+	struct ngbe_q_vector *q_vector;
+	int q_idx;
+
+	for (q_idx = 0; q_idx < adapter->num_q_vectors; q_idx++) {
+		q_vector = adapter->q_vector[q_idx];
+		napi_enable(&q_vector->napi);
+	}
+}
+
+static void ngbe_napi_disable_all(struct ngbe_adapter *adapter)
+{
+	struct ngbe_q_vector *q_vector;
+	int q_idx;
+
+	for (q_idx = 0; q_idx < adapter->num_q_vectors; q_idx++) {
+		q_vector = adapter->q_vector[q_idx];
+		napi_disable(&q_vector->napi);
+	}
+}
+
+/* NETIF_F_GSO_IPXIP4/6 may not be defined in all distributions */
+#define NGBE_GSO_PARTIAL_FEATURES (NETIF_F_GSO_GRE | \
+				    NETIF_F_GSO_GRE_CSUM | \
+				    NETIF_F_GSO_IPXIP4 | \
+				    NETIF_F_GSO_IPXIP6 | \
+				    NETIF_F_GSO_UDP_TUNNEL | \
+				    NETIF_F_GSO_UDP_TUNNEL_CSUM)
+
+static inline unsigned long ngbe_tso_features(void)
+{
+	unsigned long features = 0;
+
+	features |= NETIF_F_TSO;
+	features |= NETIF_F_TSO6;
+	features |= NETIF_F_GSO_PARTIAL | NGBE_GSO_PARTIAL_FEATURES;
+
+	return features;
+}
+
+#ifndef CONFIG_NGBE_NO_LLI
+static void ngbe_configure_lli(struct ngbe_adapter *adapter)
+{
+	/* lli should only be enabled with MSI-X and MSI */
+	if (!(adapter->flags & NGBE_FLAG_MSI_ENABLED) &&
+	    !(adapter->flags & NGBE_FLAG_MSIX_ENABLED))
+		return;
+
+	if (adapter->lli_etype) {
+		wr32(&adapter->hw, NGBE_RDB_5T_CTL1(0),
+				(NGBE_RDB_5T_CTL1_LLI |
+				 NGBE_RDB_5T_CTL1_SIZE_BP));
+		wr32(&adapter->hw, NGBE_RDB_ETYPE_CLS(0),
+				NGBE_RDB_ETYPE_CLS_LLI);
+		wr32(&adapter->hw, NGBE_PSR_ETYPE_SWC(0),
+				(adapter->lli_etype |
+				 NGBE_PSR_ETYPE_SWC_FILTER_EN));
+	}
+
+	if (adapter->lli_port) {
+		wr32(&adapter->hw, NGBE_RDB_5T_CTL1(0),
+				(NGBE_RDB_5T_CTL1_LLI |
+				 NGBE_RDB_5T_CTL1_SIZE_BP));
+
+		wr32(&adapter->hw, NGBE_RDB_5T_CTL0(0),
+				(NGBE_RDB_5T_CTL0_POOL_MASK_EN |
+				 (NGBE_RDB_5T_CTL0_PRIORITY_MASK <<
+				  NGBE_RDB_5T_CTL0_PRIORITY_SHIFT) |
+				 (NGBE_RDB_5T_CTL0_DEST_PORT_MASK <<
+				  NGBE_RDB_5T_CTL0_5TUPLE_MASK_SHIFT)));
+
+		wr32(&adapter->hw, NGBE_RDB_5T_SDP(0),
+			(adapter->lli_port << 16));
+	}
+
+	if (adapter->lli_size) {
+		wr32(&adapter->hw, NGBE_RDB_5T_CTL1(0),
+				NGBE_RDB_5T_CTL1_LLI);
+		wr32m(&adapter->hw, NGBE_RDB_LLI_THRE,
+				NGBE_RDB_LLI_THRE_SZ(~0), adapter->lli_size);
+		wr32(&adapter->hw, NGBE_RDB_5T_CTL0(0),
+				(NGBE_RDB_5T_CTL0_POOL_MASK_EN |
+				 (NGBE_RDB_5T_CTL0_PRIORITY_MASK <<
+				  NGBE_RDB_5T_CTL0_PRIORITY_SHIFT) |
+				 (NGBE_RDB_5T_CTL0_5TUPLE_MASK_MASK <<
+				  NGBE_RDB_5T_CTL0_5TUPLE_MASK_SHIFT)));
+	}
+
+	if (adapter->lli_vlan_pri) {
+		wr32m(&adapter->hw, NGBE_RDB_LLI_THRE,
+			NGBE_RDB_LLI_THRE_PRIORITY_EN |
+			NGBE_RDB_LLI_THRE_UP(~0),
+			NGBE_RDB_LLI_THRE_PRIORITY_EN |
+			(adapter->lli_vlan_pri << NGBE_RDB_LLI_THRE_UP_SHIFT));
+	}
+}
+
+#endif /* CONFIG_NGBE_NO_LLI */
+/* Additional bittime to account for NGBE framing */
+#define NGBE_ETH_FRAMING 20
+
+/*
+ * ngbe_hpbthresh - calculate high water mark for flow control
+ *
+ * @adapter: board private structure to calculate for
+ * @pb - packet buffer to calculate
+ */
+static int ngbe_hpbthresh(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	struct net_device *dev = adapter->netdev;
+	int link, tc, kb, marker;
+	u32 dv_id, rx_pba;
+
+	/* Calculate max LAN frame size */
+	tc = link = dev->mtu + ETH_HLEN + ETH_FCS_LEN + NGBE_ETH_FRAMING;
+
+	/* Calculate delay value for device */
+	dv_id = NGBE_DV(link, tc);
+
+	/* Loopback switch introduces additional latency */
+	if (adapter->flags & NGBE_FLAG_SRIOV_ENABLED)
+		dv_id += NGBE_B2BT(tc);
+
+	/* Delay value is calculated in bit times convert to KB */
+	kb = NGBE_BT2KB(dv_id);
+	rx_pba = rd32(hw, NGBE_RDB_PB_SZ)
+			>> NGBE_RDB_PB_SZ_SHIFT;
+
+	marker = rx_pba - kb;
+
+	/* It is possible that the packet buffer is not large enough
+	 * to provide required headroom. In this case throw an error
+	 * to user and a do the best we can.
+	 */
+	if (marker < 0) {
+		e_warn(drv, "Packet Buffer can not provide enough"
+			    "headroom to suppport flow control."
+			    "Decrease MTU or number of traffic classes\n");
+		marker = tc + 1;
+	}
+
+	return marker;
+}
+
+/*
+ * ngbe_lpbthresh - calculate low water mark for for flow control
+ *
+ * @adapter: board private structure to calculate for
+ * @pb - packet buffer to calculate
+ */
+static int ngbe_lpbthresh(struct ngbe_adapter *adapter)
+{
+	struct net_device *dev = adapter->netdev;
+	int tc;
+	u32 dv_id;
+
+	/* Calculate max LAN frame size */
+	tc = dev->mtu + ETH_HLEN + ETH_FCS_LEN;
+
+	/* Calculate delay value for device */
+	dv_id = NGBE_LOW_DV(tc);
+
+	/* Delay value is calculated in bit times convert to KB */
+	return NGBE_BT2KB(dv_id);
+}
+
+/*
+ * ngbe_pbthresh_setup - calculate and setup high low water marks
+ */
+
+static void ngbe_pbthresh_setup(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	int num_tc = netdev_get_num_tc(adapter->netdev);
+
+	if (!num_tc)
+		num_tc = 1;
+
+	hw->fc.high_water = ngbe_hpbthresh(adapter);
+	hw->fc.low_water = ngbe_lpbthresh(adapter);
+
+	/* Low water marks must not be larger than high water marks */
+	if (hw->fc.low_water > hw->fc.high_water)
+		hw->fc.low_water = 0;
+}
+
+static void ngbe_configure_pb(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	int hdrm = 0;
+	int tc = netdev_get_num_tc(adapter->netdev);
+
+	TCALL(hw, mac.ops.setup_rxpba, tc, hdrm, PBA_STRATEGY_EQUAL);
+	ngbe_pbthresh_setup(adapter);
+}
+
+void ngbe_configure_isb(struct ngbe_adapter *adapter)
+{
+	/* set ISB Address */
+	struct ngbe_hw *hw = &adapter->hw;
+
+	wr32(hw, NGBE_PX_ISB_ADDR_L,
+			adapter->isb_dma & DMA_BIT_MASK(32));
+	wr32(hw, NGBE_PX_ISB_ADDR_H, adapter->isb_dma >> 32);
+}
+
+void ngbe_configure_port(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 value, i;
+
+	if (adapter->num_vfs == 0) {
+		value = NGBE_CFG_PORT_CTL_NUM_VT_NONE;
+	} else
+		value = NGBE_CFG_PORT_CTL_NUM_VT_8;
+
+	/* enable double vlan and qinq, NONE VT at default */
+	value |= NGBE_CFG_PORT_CTL_D_VLAN |
+			NGBE_CFG_PORT_CTL_QINQ;
+	wr32m(hw, NGBE_CFG_PORT_CTL,
+		NGBE_CFG_PORT_CTL_D_VLAN |
+		NGBE_CFG_PORT_CTL_QINQ |
+		NGBE_CFG_PORT_CTL_NUM_VT_MASK,
+		value);
+
+	wr32(hw, NGBE_CFG_TAG_TPID(0),
+			ETH_P_8021Q | ETH_P_8021AD << 16);
+	adapter->hw.tpid[0] = ETH_P_8021Q;
+	adapter->hw.tpid[1] = ETH_P_8021AD;
+	for (i = 1; i < 4; i++)
+		wr32(hw, NGBE_CFG_TAG_TPID(i),
+			ETH_P_8021Q | ETH_P_8021Q << 16);
+	for (i = 2; i < 8; i++)
+		adapter->hw.tpid[i] = ETH_P_8021Q;
+}
+
+static void ngbe_configure(struct ngbe_adapter *adapter)
+{
+	ngbe_configure_pb(adapter);
+
+	/*
+	 * We must restore virtualization before VLANs or else
+	 * the VLVF registers will not be populated
+	 */
+	ngbe_configure_virtualization(adapter);
+	/* configure Double Vlan */
+	ngbe_configure_port(adapter);
+
+	ngbe_set_rx_mode(adapter->netdev);
+	ngbe_restore_vlan(adapter);
+
+	ngbe_configure_tx(adapter);
+	ngbe_configure_rx(adapter);
+	ngbe_configure_isb(adapter);
+}
+
+
+/**
+ * ngbe_non_sfp_link_config - set up non-SFP+ link
+ * @hw: pointer to private hardware struct
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int ngbe_non_sfp_link_config(struct ngbe_hw *hw)
+{
+	u32 speed;
+	bool autoneg, link_up = false;
+	u32 ret = NGBE_ERR_LINK_SETUP;
+
+	ret = TCALL(hw, mac.ops.check_link, &speed, &link_up, false);
+
+	speed = hw->phy.autoneg_advertised;
+	if (!speed)
+		ret = TCALL(hw, mac.ops.get_link_capabilities, &speed,
+							&autoneg);
+
+	if ((hw->subsystem_device_id & OEM_MASK) == OCP_CARD ||
+		((hw->subsystem_device_id & NCSI_SUP_MASK) == NCSI_SUP)) {
+
+	} else {
+		msleep(50);
+		if (hw->phy.type == ngbe_phy_internal) {
+			TCALL(hw, eeprom.ops.phy_signal_set);
+			TCALL(hw, phy.ops.setup_once);
+		}
+	}
+
+	ret = TCALL(hw, mac.ops.setup_link, speed, false);
+
+	return ret;
+}
+
+static void ngbe_setup_gpie(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 gpie = 0;
+
+	if (adapter->flags & NGBE_FLAG_MSIX_ENABLED) {
+		gpie = NGBE_PX_GPIE_MODEL;
+		/*
+		 * use EIAM to auto-mask when MSI-X interrupt is asserted
+		 * this saves a register write for every interrupt
+		 */
+	} else {
+		/* legacy interrupts, use EIAM to auto-mask when reading EICR,
+		 * specifically only auto mask tx and rx interrupts */
+	}
+
+	wr32(hw, NGBE_PX_GPIE, gpie);
+}
+
+static void ngbe_up_complete(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	int err;
+
+	ngbe_get_hw_control(adapter);
+	ngbe_setup_gpie(adapter);
+
+	if (adapter->flags & NGBE_FLAG_MSIX_ENABLED)
+		ngbe_configure_msix(adapter);
+	else
+		ngbe_configure_msi_and_legacy(adapter);
+
+	smp_mb__before_atomic();
+	clear_bit(__NGBE_DOWN, &adapter->state);
+	ngbe_napi_enable_all(adapter);
+#ifndef CONFIG_NGBE_NO_LLI
+	ngbe_configure_lli(adapter);
+#endif
+
+	err = ngbe_non_sfp_link_config(hw);
+	if (err)
+		e_err(probe, "link_config FAILED %d\n", err);
+
+	/* sellect GMII */
+	wr32(hw, NGBE_MAC_TX_CFG,
+		(rd32(hw, NGBE_MAC_TX_CFG) & ~NGBE_MAC_TX_CFG_SPEED_MASK) |
+		NGBE_MAC_TX_CFG_SPEED_1G);
+
+	/* clear any pending interrupts, may auto mask */
+	rd32(hw, NGBE_PX_IC);
+	rd32(hw, NGBE_PX_MISC_IC);
+	ngbe_irq_enable(adapter, true, true);
+
+	if (((hw->subsystem_device_id & OEM_MASK) == LY_M88E1512_SFP) ||
+		 (hw->subsystem_device_id & OEM_MASK) == LY_YT8521S_SFP)
+		/* gpio0 is used to power on/off control*/
+		wr32(hw, NGBE_GPIO_DR, 0);
+
+	/* enable transmits */
+	netif_tx_start_all_queues(adapter->netdev);
+
+	/* bring the link up in the watchdog, this could race with our first
+	 * link up interrupt but shouldn't be a problem */
+	adapter->flags |= NGBE_FLAG_NEED_LINK_UPDATE;
+	adapter->link_check_timeout = jiffies;
+#ifdef CONFIG_NGBE_POLL_LINK_STATUS
+	mod_timer(&adapter->link_check_timer, jiffies);
+#endif
+	mod_timer(&adapter->service_timer, jiffies);
+	/* ngbe_clear_vf_stats_counters(adapter); */
+
+	/* Set PF Reset Done bit so PF/VF Mail Ops can work */
+	wr32m(hw, NGBE_CFG_PORT_CTL,
+		NGBE_CFG_PORT_CTL_PFRSTD, NGBE_CFG_PORT_CTL_PFRSTD);
+}
+
+void ngbe_reinit_locked(struct ngbe_adapter *adapter)
+{
+	WARN_ON(in_interrupt());
+	/* put off any impending NetWatchDogTimeout */
+	netif_trans_update(adapter->netdev);
+
+	while (test_and_set_bit(__NGBE_RESETTING, &adapter->state))
+		usleep_range(1000, 2000);
+	ngbe_down(adapter);
+	/*
+	 * If SR-IOV enabled then wait a bit before bringing the adapter
+	 * back up to give the VFs time to respond to the reset.  The
+	 * two second wait is based upon the watchdog timer cycle in
+	 * the VF driver.
+	 */
+	if (adapter->flags & NGBE_FLAG_SRIOV_ENABLED)
+		msleep(2000);
+	ngbe_up(adapter);
+	clear_bit(__NGBE_RESETTING, &adapter->state);
+}
+
+void ngbe_up(struct ngbe_adapter *adapter)
+{
+	/* hardware has been reset, we need to reload some things */
+	ngbe_configure(adapter);
+	ngbe_up_complete(adapter);
+}
+
+void ngbe_reset(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	struct net_device *netdev = adapter->netdev;
+	int err;
+	u8 old_addr[ETH_ALEN];
+
+	if (NGBE_REMOVED(hw->hw_addr))
+		return;
+
+	err = TCALL(hw, mac.ops.init_hw);
+	switch (err) {
+	case 0:
+		break;
+	case NGBE_ERR_MASTER_REQUESTS_PENDING:
+		e_dev_err("master disable timed out\n");
+		break;
+	case NGBE_ERR_EEPROM_VERSION:
+		/* We are running on a pre-production device, log a warning */
+		e_dev_warn("This device is a pre-production adapter/LOM. "
+			   "Please be aware there may be issues associated "
+			   "with your hardware.  If you are experiencing "
+			   "problems please contact your hardware "
+			   "representative who provided you with this "
+			   "hardware.\n");
+		break;
+	default:
+		e_dev_err("Hardware Error: %d\n", err);
+	}
+
+	/* do not flush user set addresses */
+	memcpy(old_addr, &adapter->mac_table[0].addr, netdev->addr_len);
+	ngbe_flush_sw_mac_table(adapter);
+	ngbe_mac_set_default_filter(adapter, old_addr);
+
+	/* update SAN MAC vmdq pool selection */
+	TCALL(hw, mac.ops.set_vmdq_san_mac, VMDQ_P(0));
+
+	/* Clear saved DMA coalescing values except for watchdog_timer */
+	hw->mac.dmac_config.fcoe_en = false;
+	hw->mac.dmac_config.link_speed = 0;
+	hw->mac.dmac_config.fcoe_tc = 0;
+	hw->mac.dmac_config.num_tcs = 0;
+
+	if (test_bit(__NGBE_PTP_RUNNING, &adapter->state))
+		ngbe_ptp_reset(adapter);
+}
+
+/**
+ * ngbe_clean_rx_ring - Free Rx Buffers per Queue
+ * @rx_ring: ring to free buffers from
+ **/
+static void ngbe_clean_rx_ring(struct ngbe_ring *rx_ring)
+{
+	struct device *dev = rx_ring->dev;
+	unsigned long size;
+	u16 i;
+
+	/* ring already cleared, nothing to do */
+	if (!rx_ring->rx_buffer_info)
+		return;
+
+	/* Free all the Rx ring sk_buffs */
+	for (i = 0; i < rx_ring->count; i++) {
+		struct ngbe_rx_buffer *rx_buffer = &rx_ring->rx_buffer_info[i];
+		if (rx_buffer->dma) {
+			dma_unmap_single(dev,
+					 rx_buffer->dma,
+					 rx_ring->rx_buf_len,
+					 DMA_FROM_DEVICE);
+			rx_buffer->dma = 0;
+		}
+
+		if (rx_buffer->skb) {
+			struct sk_buff *skb = rx_buffer->skb;
+			if (NGBE_CB(skb)->dma_released) {
+				dma_unmap_single(dev,
+						NGBE_CB(skb)->dma,
+						rx_ring->rx_buf_len,
+						DMA_FROM_DEVICE);
+				NGBE_CB(skb)->dma = 0;
+				NGBE_CB(skb)->dma_released = false;
+			}
+
+			if (NGBE_CB(skb)->page_released)
+				dma_unmap_page(dev,
+						NGBE_CB(skb)->dma,
+						ngbe_rx_bufsz(rx_ring),
+						DMA_FROM_DEVICE);
+			dev_kfree_skb(skb);
+			rx_buffer->skb = NULL;
+		}
+
+		if (!rx_buffer->page)
+			continue;
+
+		dma_unmap_page(dev, rx_buffer->page_dma,
+					ngbe_rx_pg_size(rx_ring),
+					DMA_FROM_DEVICE);
+
+		__free_pages(rx_buffer->page,
+					ngbe_rx_pg_order(rx_ring));
+		rx_buffer->page = NULL;
+	}
+
+	size = sizeof(struct ngbe_rx_buffer) * rx_ring->count;
+	memset(rx_ring->rx_buffer_info, 0, size);
+
+	/* Zero out the descriptor ring */
+	memset(rx_ring->desc, 0, rx_ring->size);
+
+	rx_ring->next_to_alloc = 0;
+	rx_ring->next_to_clean = 0;
+	rx_ring->next_to_use = 0;
+}
+
+/**
+ * ngbe_clean_tx_ring - Free Tx Buffers
+ * @tx_ring: ring to be cleaned
+ **/
+static void ngbe_clean_tx_ring(struct ngbe_ring *tx_ring)
+{
+	struct ngbe_tx_buffer *tx_buffer_info;
+	unsigned long size;
+	u16 i;
+
+	/* ring already cleared, nothing to do */
+	if (!tx_ring->tx_buffer_info)
+		return;
+
+	/* Free all the Tx ring sk_buffs */
+	for (i = 0; i < tx_ring->count; i++) {
+		tx_buffer_info = &tx_ring->tx_buffer_info[i];
+		ngbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
+	}
+
+	netdev_tx_reset_queue(txring_txq(tx_ring));
+
+	size = sizeof(struct ngbe_tx_buffer) * tx_ring->count;
+	memset(tx_ring->tx_buffer_info, 0, size);
+
+	/* Zero out the descriptor ring */
+	memset(tx_ring->desc, 0, tx_ring->size);
+}
+
+/**
+ * ngbe_clean_all_rx_rings - Free Rx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void ngbe_clean_all_rx_rings(struct ngbe_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		ngbe_clean_rx_ring(adapter->rx_ring[i]);
+}
+
+/**
+ * ngbe_clean_all_tx_rings - Free Tx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void ngbe_clean_all_tx_rings(struct ngbe_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		ngbe_clean_tx_ring(adapter->tx_ring[i]);
+}
+
+void ngbe_disable_device(struct ngbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 i;
+
+	/* signal that we are down to the interrupt handler */
+	if (test_and_set_bit(__NGBE_DOWN, &adapter->state))
+		return; /* do nothing if already down */
+
+	ngbe_disable_pcie_master(hw);
+	/* disable receives */
+	TCALL(hw, mac.ops.disable_rx);
+
+	/* disable all enabled rx queues */
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		/* this call also flushes the previous write */
+		ngbe_disable_rx_queue(adapter, adapter->rx_ring[i]);
+
+	netif_tx_stop_all_queues(netdev);
+
+	/* call carrier off first to avoid false dev_watchdog timeouts */
+	netif_carrier_off(netdev);
+	netif_tx_disable(netdev);
+
+	if ((hw->subsystem_device_id & OEM_MASK) == LY_M88E1512_SFP ||
+		(hw->subsystem_device_id & OEM_MASK) == LY_YT8521S_SFP)
+		/* gpio0 is used to power on/off control*/
+		wr32(hw, NGBE_GPIO_DR, NGBE_GPIO_DR_0);
+
+	ngbe_irq_disable(adapter);
+
+	ngbe_napi_disable_all(adapter);
+
+	adapter->flags2 &= ~(NGBE_FLAG2_PF_RESET_REQUESTED |
+						NGBE_FLAG2_DEV_RESET_REQUESTED |
+						NGBE_FLAG2_GLOBAL_RESET_REQUESTED);
+	adapter->flags &= ~NGBE_FLAG_NEED_LINK_UPDATE;
+
+	del_timer_sync(&adapter->service_timer);
+#ifdef CONFIG_NGBE_POLL_LINK_STATUS
+	del_timer_sync(&adapter->link_check_timer);
+#endif
+	if (adapter->num_vfs) {
+		/* Clear EITR Select mapping */
+		wr32(&adapter->hw, NGBE_PX_ITRSEL, 0);
+
+		/* Mark all the VFs as inactive */
+		for (i = 0 ; i < adapter->num_vfs; i++)
+			adapter->vfinfo[i].clear_to_send = 0;
+
+		/* ping all the active vfs to let them know we are going down */
+		ngbe_ping_all_vfs(adapter);
+
+		/* Disable all VFTE/VFRE TX/RX */
+		ngbe_disable_tx_rx(adapter);
+	}
+
+	/*OCP NCSI need it*/
+	if (!(((hw->subsystem_device_id & OEM_MASK) == OCP_CARD) ||
+		((hw->subsystem_device_id & WOL_SUP_MASK) == WOL_SUP) ||
+		((hw->subsystem_device_id & NCSI_SUP_MASK) == NCSI_SUP))) {
+		/* disable mac transmiter */
+		wr32m(hw, NGBE_MAC_TX_CFG, NGBE_MAC_TX_CFG_TE, 0);
+	}
+
+	/* disable transmits in the hardware now that interrupts are off */
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		u8 reg_idx = adapter->tx_ring[i]->reg_idx;
+		wr32(hw, NGBE_PX_TR_CFG(reg_idx),
+				NGBE_PX_TR_CFG_SWFLSH);
+	}
+
+	/* Disable the Tx DMA engine */
+	wr32m(hw, NGBE_TDM_CTL, NGBE_TDM_CTL_TE, 0);
+}
+
+
+void ngbe_down(struct ngbe_adapter *adapter)
+{
+	ngbe_disable_device(adapter);
+
+	if (!pci_channel_offline(adapter->pdev))
+		ngbe_reset(adapter);
+
+	ngbe_clean_all_tx_rings(adapter);
+	ngbe_clean_all_rx_rings(adapter);
+}
+
+/**
+ *  ngbe_init_shared_code - Initialize the shared code
+ *  @hw: pointer to hardware structure
+ *
+ *  This will assign function pointers and assign the MAC type and PHY code.
+ *  Does not touch the hardware. This function must be called prior to any
+ *  other function in the shared code. The ngbe_hw structure should be
+ *  memset to 0 prior to calling this function.  The following fields in
+ *  hw structure should be filled in prior to calling this function:
+ *  hw_addr, back, device_id, vendor_id, subsystem_device_id,
+ *  subsystem_vendor_id, and revision_id
+ **/
+s32 ngbe_init_shared_code(struct ngbe_hw *hw)
+{
+	DEBUGFUNC("\n");
+
+	if ((hw->subsystem_device_id & INTERNAL_SFP_MASK) == INTERNAL_SFP ||
+		(hw->subsystem_device_id & OEM_MASK) == LY_M88E1512_SFP)
+		hw->phy.type = ngbe_phy_m88e1512_sfi;
+	else if (hw->subsystem_device_id == NGBE_WX1860AL_M88E1512_RJ45)
+		hw->phy.type = ngbe_phy_m88e1512;
+	else if ((hw->subsystem_device_id & OEM_MASK) == YT8521S_SFP ||
+			(hw->subsystem_device_id & OEM_MASK) == LY_YT8521S_SFP)
+		hw->phy.type = ngbe_phy_yt8521s_sfi;
+	else
+		hw->phy.type = ngbe_phy_internal;
+
+/* select claus22 */
+	wr32(hw, NGBE_MDIO_CLAUSE_SELECT, 0xF);
+
+	return ngbe_init_ops(hw);
+}
+
+/**
+ * ngbe_sw_init - Initialize general software structures (struct ngbe_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * ngbe_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static const u32 def_rss_key[10] = {
+	0xE291D73D, 0x1805EC6C, 0x2A94B30D,
+	0xA54F2BEC, 0xEA49AF7C, 0xE214AD3D, 0xB855AABE,
+	0x6A3E67EA, 0x14364D17, 0x3BED200D
+};
+
+static int ngbe_sw_init(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	struct pci_dev *pdev = adapter->pdev;
+	int err;
+
+	/* PCI config space info */
+	hw->vendor_id = pdev->vendor;
+	hw->device_id = pdev->device;
+	pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
+	if (hw->revision_id == NGBE_FAILED_READ_CFG_BYTE &&
+		ngbe_check_cfg_remove(hw, pdev)) {
+		e_err(probe, "read of revision id failed\n");
+		err = -ENODEV;
+		goto out;
+	}
+	hw->subsystem_vendor_id = pdev->subsystem_vendor;
+	hw->subsystem_device_id = pdev->subsystem_device;
+
+	/* phy type, phy ops, mac ops */
+	err = ngbe_init_shared_code(hw);
+	if (err) {
+		e_err(probe, "init_shared_code failed: %d\n", err);
+		goto out;
+	}
+
+	adapter->mac_table = kzalloc(sizeof(struct ngbe_mac_addr) *
+				     hw->mac.num_rar_entries,
+				     GFP_ATOMIC);
+	if (!adapter->mac_table) {
+		err = NGBE_ERR_OUT_OF_MEM;
+		e_err(probe, "mac_table allocation failed: %d\n", err);
+		goto out;
+	}
+
+	memcpy(adapter->rss_key, def_rss_key, sizeof(def_rss_key));
+
+	/* Set common capability flags and settings */
+	adapter->max_q_vectors = NGBE_MAX_MSIX_Q_VECTORS_EMERALD;
+
+	/* Set MAC specific capability flags and exceptions */
+	adapter->flags |= NGBE_FLAGS_SP_INIT;
+	adapter->flags2 |= NGBE_FLAG2_TEMP_SENSOR_CAPABLE;
+	adapter->flags2 |= NGBE_FLAG2_EEE_CAPABLE;
+
+	/* init mailbox params */
+	TCALL(hw, mbx.ops.init_params);
+
+	/* default flow control settings */
+	hw->fc.requested_mode = ngbe_fc_full;
+	hw->fc.current_mode = ngbe_fc_full; /* init for ethtool output */
+
+	adapter->last_lfc_mode = hw->fc.current_mode;
+	hw->fc.pause_time = NGBE_DEFAULT_FCPAUSE;
+	hw->fc.send_xon = true;
+	hw->fc.disable_fc_autoneg = false;
+
+	/* set default ring sizes */
+	adapter->tx_ring_count = NGBE_DEFAULT_TXD;
+	adapter->rx_ring_count = NGBE_DEFAULT_RXD;
+
+	/* set default work limits */
+	adapter->tx_work_limit = NGBE_DEFAULT_TX_WORK;
+	adapter->rx_work_limit = NGBE_DEFAULT_RX_WORK;
+
+	adapter->tx_timeout_recovery_level = 0;
+
+	/* PF holds first pool slot */
+	adapter->num_vmdqs = 1;
+	set_bit(0, &adapter->fwd_bitmask);
+	set_bit(__NGBE_DOWN, &adapter->state);
+out:
+	return err;
+}
+
+/**
+ * ngbe_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @tx_ring:    tx descriptor ring (for a specific queue) to setup
+ *
+ * Return 0 on success, negative on failure
+ **/
+int ngbe_setup_tx_resources(struct ngbe_ring *tx_ring)
+{
+	struct device *dev = tx_ring->dev;
+	int orig_node = dev_to_node(dev);
+	int numa_node = -1;
+	int size;
+
+	size = sizeof(struct ngbe_tx_buffer) * tx_ring->count;
+
+	if (tx_ring->q_vector)
+		numa_node = tx_ring->q_vector->numa_node;
+
+	tx_ring->tx_buffer_info = vzalloc_node(size, numa_node);
+	if (!tx_ring->tx_buffer_info)
+		tx_ring->tx_buffer_info = vzalloc(size);
+	if (!tx_ring->tx_buffer_info)
+		goto err;
+
+	/* round up to nearest 4K */
+	tx_ring->size = tx_ring->count * sizeof(union ngbe_tx_desc);
+	tx_ring->size = ALIGN(tx_ring->size, 4096);
+
+	set_dev_node(dev, numa_node);
+	tx_ring->desc = dma_alloc_coherent(dev,
+					   tx_ring->size,
+					   &tx_ring->dma,
+					   GFP_KERNEL);
+	set_dev_node(dev, orig_node);
+	if (!tx_ring->desc)
+		tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,
+						   &tx_ring->dma, GFP_KERNEL);
+	if (!tx_ring->desc)
+		goto err;
+
+	return 0;
+
+err:
+	vfree(tx_ring->tx_buffer_info);
+	tx_ring->tx_buffer_info = NULL;
+	dev_err(dev, "Unable to allocate memory for the Tx descriptor ring\n");
+	return -ENOMEM;
+}
+
+/**
+ * ngbe_setup_all_tx_resources - allocate all queues Tx resources
+ * @adapter: board private structure
+ *
+ * If this function returns with an error, then it's possible one or
+ * more of the rings is populated (while the rest are not).  It is the
+ * callers duty to clean those orphaned rings.
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int ngbe_setup_all_tx_resources(struct ngbe_adapter *adapter)
+{
+	int i, err = 0;
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		err = ngbe_setup_tx_resources(adapter->tx_ring[i]);
+		if (!err)
+			continue;
+
+		e_err(probe, "Allocation for Tx Queue %u failed\n", i);
+		goto err_setup_tx;
+	}
+
+	return 0;
+err_setup_tx:
+	/* rewind the index freeing the rings as we go */
+	while (i--)
+		ngbe_free_tx_resources(adapter->tx_ring[i]);
+	return err;
+}
+
+/**
+ * ngbe_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @rx_ring:    rx descriptor ring (for a specific queue) to setup
+ *
+ * Returns 0 on success, negative on failure
+ **/
+int ngbe_setup_rx_resources(struct ngbe_ring *rx_ring)
+{
+	struct device *dev = rx_ring->dev;
+	int orig_node = dev_to_node(dev);
+	int numa_node = -1;
+	int size;
+
+	size = sizeof(struct ngbe_rx_buffer) * rx_ring->count;
+
+	if (rx_ring->q_vector)
+		numa_node = rx_ring->q_vector->numa_node;
+
+	rx_ring->rx_buffer_info = vzalloc_node(size, numa_node);
+	if (!rx_ring->rx_buffer_info)
+		rx_ring->rx_buffer_info = vzalloc(size);
+	if (!rx_ring->rx_buffer_info)
+		goto err;
+
+	/* Round up to nearest 4K */
+	rx_ring->size = rx_ring->count * sizeof(union ngbe_rx_desc);
+	rx_ring->size = ALIGN(rx_ring->size, 4096);
+
+	set_dev_node(dev, numa_node);
+	rx_ring->desc = dma_alloc_coherent(dev,
+					   rx_ring->size,
+					   &rx_ring->dma,
+					   GFP_KERNEL);
+	set_dev_node(dev, orig_node);
+	if (!rx_ring->desc)
+		rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size,
+						   &rx_ring->dma, GFP_KERNEL);
+	if (!rx_ring->desc)
+		goto err;
+
+	return 0;
+err:
+	vfree(rx_ring->rx_buffer_info);
+	rx_ring->rx_buffer_info = NULL;
+	dev_err(dev, "Unable to allocate memory for the Rx descriptor ring\n");
+	return -ENOMEM;
+}
+
+/**
+ * ngbe_setup_all_rx_resources - allocate all queues Rx resources
+ * @adapter: board private structure
+ *
+ * If this function returns with an error, then it's possible one or
+ * more of the rings is populated (while the rest are not).  It is the
+ * callers duty to clean those orphaned rings.
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int ngbe_setup_all_rx_resources(struct ngbe_adapter *adapter)
+{
+	int i, err = 0;
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		err = ngbe_setup_rx_resources(adapter->rx_ring[i]);
+		if (!err) {
+			continue;
+		}
+
+		e_err(probe, "Allocation for Rx Queue %u failed\n", i);
+		goto err_setup_rx;
+	}
+
+		return 0;
+err_setup_rx:
+	/* rewind the index freeing the rings as we go */
+	while (i--)
+		ngbe_free_rx_resources(adapter->rx_ring[i]);
+	return err;
+}
+
+/**
+ * ngbe_setup_isb_resources - allocate interrupt status resources
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int ngbe_setup_isb_resources(struct ngbe_adapter *adapter)
+{
+	struct device *dev = pci_dev_to_dev(adapter->pdev);
+
+	adapter->isb_mem = dma_alloc_coherent(dev,
+					   sizeof(u32) * NGBE_ISB_MAX,
+					   &adapter->isb_dma,
+					   GFP_KERNEL);
+	if (!adapter->isb_mem) {
+		e_err(probe, "ngbe_setup_isb_resources: alloc isb_mem failed\n");
+		return -ENOMEM;
+	}
+	memset(adapter->isb_mem, 0, sizeof(u32) * NGBE_ISB_MAX);
+	return 0;
+}
+
+/**
+ * ngbe_free_isb_resources - allocate all queues Rx resources
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+static void ngbe_free_isb_resources(struct ngbe_adapter *adapter)
+{
+	struct device *dev = pci_dev_to_dev(adapter->pdev);
+
+	dma_free_coherent(dev, sizeof(u32) * NGBE_ISB_MAX,
+			  adapter->isb_mem, adapter->isb_dma);
+	adapter->isb_mem = NULL;
+}
+
+/**
+ * ngbe_free_tx_resources - Free Tx Resources per Queue
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+void ngbe_free_tx_resources(struct ngbe_ring *tx_ring)
+{
+	ngbe_clean_tx_ring(tx_ring);
+
+	vfree(tx_ring->tx_buffer_info);
+	tx_ring->tx_buffer_info = NULL;
+
+	/* if not set, then don't free */
+	if (!tx_ring->desc)
+		return;
+
+	dma_free_coherent(tx_ring->dev, tx_ring->size,
+			  tx_ring->desc, tx_ring->dma);
+	tx_ring->desc = NULL;
+}
+
+/**
+ * ngbe_free_all_tx_resources - Free Tx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+static void ngbe_free_all_tx_resources(struct ngbe_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		ngbe_free_tx_resources(adapter->tx_ring[i]);
+}
+
+/**
+ * ngbe_free_rx_resources - Free Rx Resources
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+void ngbe_free_rx_resources(struct ngbe_ring *rx_ring)
+{
+	ngbe_clean_rx_ring(rx_ring);
+
+	vfree(rx_ring->rx_buffer_info);
+	rx_ring->rx_buffer_info = NULL;
+
+	/* if not set, then don't free */
+	if (!rx_ring->desc)
+		return;
+
+	dma_free_coherent(rx_ring->dev, rx_ring->size,
+			  rx_ring->desc, rx_ring->dma);
+
+	rx_ring->desc = NULL;
+}
+
+/**
+ * ngbe_free_all_rx_resources - Free Rx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+static void ngbe_free_all_rx_resources(struct ngbe_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		ngbe_free_rx_resources(adapter->rx_ring[i]);
+}
+
+/**
+ * ngbe_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int ngbe_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+
+	if ((new_mtu < 68) || (new_mtu > 9414))
+		return -EINVAL;
+
+	/*
+	 * we cannot allow legacy VFs to enable their receive
+	 * paths when MTU greater than 1500 is configured.  So display a
+	 * warning that legacy VFs will be disabled.
+	 */
+	if ((adapter->flags & NGBE_FLAG_SRIOV_ENABLED) &&
+	    (new_mtu > ETH_DATA_LEN))
+		e_warn(probe, "Setting MTU > 1500 will disable legacy VFs\n");
+
+	e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu);
+
+	/* must set new MTU before calling down or up */
+	netdev->mtu = new_mtu;
+
+	if (netif_running(netdev))
+		ngbe_reinit_locked(adapter);
+
+	return 0;
+}
+
+/**
+ * ngbe_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP).  At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+int ngbe_open(struct net_device *netdev)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	int err;
+
+	/* disallow open during test */
+	if (test_bit(__NGBE_TESTING, &adapter->state))
+		return -EBUSY;
+
+	netif_carrier_off(netdev);
+
+	/* allocate transmit descriptors */
+	err = ngbe_setup_all_tx_resources(adapter);
+	if (err)
+		goto err_setup_tx;
+
+	/* allocate receive descriptors */
+	err = ngbe_setup_all_rx_resources(adapter);
+	if (err)
+		goto err_setup_rx;
+
+	err = ngbe_setup_isb_resources(adapter);
+	if (err)
+		goto err_req_isb;
+
+	ngbe_configure(adapter);
+
+	err = ngbe_request_irq(adapter);
+	if (err)
+		goto err_req_irq;
+
+	if (adapter->num_tx_queues) {
+		/* Notify the stack of the actual queue counts. */
+		err = netif_set_real_num_tx_queues(netdev, adapter->num_vmdqs > 1
+						   ? adapter->queues_per_pool
+						   : adapter->num_tx_queues);
+		if (err)
+			goto err_set_queues;
+	}
+
+	if (adapter->num_rx_queues) {
+		err = netif_set_real_num_rx_queues(netdev, adapter->num_vmdqs > 1
+						   ? adapter->queues_per_pool
+						   : adapter->num_rx_queues);
+		if (err)
+			goto err_set_queues;
+	}
+
+	ngbe_ptp_init(adapter);
+	ngbe_up_complete(adapter);
+
+	return 0;
+
+err_set_queues:
+	ngbe_free_irq(adapter);
+err_req_irq:
+	ngbe_free_isb_resources(adapter);
+err_req_isb:
+	ngbe_free_all_rx_resources(adapter);
+
+err_setup_rx:
+	ngbe_free_all_tx_resources(adapter);
+err_setup_tx:
+	ngbe_reset(adapter);
+	return err;
+}
+
+/**
+ * ngbe_close_suspend - actions necessary to both suspend and close flows
+ * @adapter: the private adapter struct
+ *
+ * This function should contain the necessary work common to both suspending
+ * and closing of the device.
+ */
+static void ngbe_close_suspend(struct ngbe_adapter *adapter)
+{
+	ngbe_ptp_suspend(adapter);
+	ngbe_disable_device(adapter);
+
+	ngbe_clean_all_tx_rings(adapter);
+	ngbe_clean_all_rx_rings(adapter);
+
+	ngbe_free_irq(adapter);
+
+	ngbe_free_isb_resources(adapter);
+	ngbe_free_all_rx_resources(adapter);
+	ngbe_free_all_tx_resources(adapter);
+}
+
+/**
+ * ngbe_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS.  The hardware is still under the drivers control, but
+ * needs to be disabled.  A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+int ngbe_close(struct net_device *netdev)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+
+	ngbe_ptp_stop(adapter);
+	ngbe_down(adapter);
+	ngbe_free_irq(adapter);
+
+	ngbe_free_isb_resources(adapter);
+	ngbe_free_all_rx_resources(adapter);
+	ngbe_free_all_tx_resources(adapter);
+
+	ngbe_release_hw_control(adapter);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ngbe_resume(struct pci_dev *pdev)
+{
+	struct ngbe_adapter *adapter;
+	struct net_device *netdev;
+	u32 err;
+
+	adapter = pci_get_drvdata(pdev);
+	netdev = adapter->netdev;
+	adapter->hw.hw_addr = adapter->io_addr;
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	/*
+	 * pci_restore_state clears dev->state_saved so call
+	 * pci_save_state to restore it.
+	 */
+	pci_save_state(pdev);
+	wr32(&adapter->hw, NGBE_PSR_WKUP_CTL, adapter->wol);
+
+	err = pci_enable_device_mem(pdev);
+	if (err) {
+		e_dev_err("Cannot enable PCI device from suspend\n");
+		return err;
+	}
+	smp_mb__before_atomic();
+	clear_bit(__NGBE_DISABLED, &adapter->state);
+	pci_set_master(pdev);
+
+	pci_wake_from_d3(pdev, false);
+
+	ngbe_reset(adapter);
+
+	rtnl_lock();
+
+	err = ngbe_init_interrupt_scheme(adapter);
+	if (!err && netif_running(netdev))
+		err = ngbe_open(netdev);
+
+	rtnl_unlock();
+
+	if (err)
+		return err;
+
+	netif_device_attach(netdev);
+
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+/*
+ * __ngbe_shutdown is not used when power manangbeent
+ * is disabled on older kernels (<2.6.12). causes a compile
+ * warning/error, because it is defined and not used.
+ */
+static int __ngbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
+{
+	struct ngbe_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev = adapter->netdev;
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 wufc = adapter->wol;
+#ifdef CONFIG_PM
+	int retval = 0;
+#endif
+
+	netif_device_detach(netdev);
+
+	rtnl_lock();
+	if (netif_running(netdev))
+		ngbe_close_suspend(adapter);
+	rtnl_unlock();
+
+	ngbe_clear_interrupt_scheme(adapter);
+
+#ifdef CONFIG_PM
+	retval = pci_save_state(pdev);
+	if (retval)
+		return retval;
+#endif
+
+	/* this won't stop link of managebility or WoL is enabled */
+	ngbe_stop_mac_link_on_d3(hw);
+
+	if (wufc) {
+		ngbe_set_rx_mode(netdev);
+		ngbe_configure_rx(adapter);
+		/* enable the optics for SFP+ fiber as we can WoL */
+		TCALL(hw, mac.ops.enable_tx_laser);
+
+		/* turn on all-multi mode if wake on multicast is enabled */
+		if (wufc & NGBE_PSR_WKUP_CTL_MC) {
+			wr32m(hw, NGBE_PSR_CTL,
+				NGBE_PSR_CTL_MPE, NGBE_PSR_CTL_MPE);
+		}
+
+		pci_clear_master(adapter->pdev);
+		wr32(hw, NGBE_PSR_WKUP_CTL, wufc);
+	} else {
+		wr32(hw, NGBE_PSR_WKUP_CTL, 0);
+	}
+
+	pci_wake_from_d3(pdev, !!wufc);
+
+	*enable_wake = !!wufc;
+	ngbe_release_hw_control(adapter);
+
+	if (!test_and_set_bit(__NGBE_DISABLED, &adapter->state))
+		pci_disable_device(pdev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ngbe_suspend(struct pci_dev *pdev,
+			 pm_message_t __always_unused state)
+{
+	int retval;
+	bool wake;
+
+	retval = __ngbe_shutdown(pdev, &wake);
+	if (retval)
+		return retval;
+
+	if (wake) {
+		pci_prepare_to_sleep(pdev);
+	} else {
+		pci_wake_from_d3(pdev, false);
+		pci_set_power_state(pdev, PCI_D3hot);
+	}
+
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+static void ngbe_shutdown(struct pci_dev *pdev)
+{
+	bool wake;
+
+	__ngbe_shutdown(pdev, &wake);
+
+	if (system_state == SYSTEM_POWER_OFF) {
+		pci_wake_from_d3(pdev, wake);
+		pci_set_power_state(pdev, PCI_D3hot);
+	}
+}
+
+/**
+ * ngbe_get_stats64 - Get System Network Statistics
+ * @netdev: network interface device structure
+ * @stats: storage space for 64bit statistics
+ *
+ * Returns 64bit statistics, for use in the ndo_get_stats64 callback. This
+ * function replaces ngbe_get_stats for kernels which support it.
+ */
+static void ngbe_get_stats64(struct net_device *netdev,
+			      struct rtnl_link_stats64 *stats)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	int i;
+
+	rcu_read_lock();
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		struct ngbe_ring *ring = READ_ONCE(adapter->rx_ring[i]);
+		u64 bytes, packets;
+		unsigned int start;
+
+		if (ring) {
+			do {
+				start = u64_stats_fetch_begin_irq(&ring->syncp);
+				packets = ring->stats.packets;
+				bytes   = ring->stats.bytes;
+			} while (u64_stats_fetch_retry_irq(&ring->syncp,
+				 start));
+			stats->rx_packets += packets;
+			stats->rx_bytes   += bytes;
+		}
+	}
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct ngbe_ring *ring = READ_ONCE(adapter->tx_ring[i]);
+		u64 bytes, packets;
+		unsigned int start;
+
+		if (ring) {
+			do {
+				start = u64_stats_fetch_begin_irq(&ring->syncp);
+				packets = ring->stats.packets;
+				bytes   = ring->stats.bytes;
+			} while (u64_stats_fetch_retry_irq(&ring->syncp,
+				 start));
+			stats->tx_packets += packets;
+			stats->tx_bytes   += bytes;
+		}
+	}
+	rcu_read_unlock();
+	/* following stats updated by ngbe_watchdog_task() */
+	stats->multicast        = netdev->stats.multicast;
+	stats->rx_errors        = netdev->stats.rx_errors;
+	stats->rx_length_errors = netdev->stats.rx_length_errors;
+	stats->rx_crc_errors    = netdev->stats.rx_crc_errors;
+	stats->rx_missed_errors = netdev->stats.rx_missed_errors;
+}
+
+/**
+ * ngbe_update_stats - Update the board statistics counters.
+ * @adapter: board private structure
+ **/
+void ngbe_update_stats(struct ngbe_adapter *adapter)
+{
+	struct net_device_stats *net_stats = &adapter->netdev->stats;
+	struct ngbe_hw *hw = &adapter->hw;
+	struct ngbe_hw_stats *hwstats = &adapter->stats;
+	u64 total_mpc = 0;
+	u32 i, bprc, lxon, lxoff;
+	u64 non_eop_descs = 0, restart_queue = 0, tx_busy = 0;
+	u64 alloc_rx_page_failed = 0, alloc_rx_buff_failed = 0;
+	u64 bytes = 0, packets = 0, hw_csum_rx_error = 0;
+	u64 hw_csum_rx_good = 0;
+
+	if (test_bit(__NGBE_DOWN, &adapter->state) ||
+	    test_bit(__NGBE_RESETTING, &adapter->state))
+		return;
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		struct ngbe_ring *rx_ring = adapter->rx_ring[i];
+		non_eop_descs += rx_ring->rx_stats.non_eop_descs;
+		alloc_rx_page_failed += rx_ring->rx_stats.alloc_rx_page_failed;
+		alloc_rx_buff_failed += rx_ring->rx_stats.alloc_rx_buff_failed;
+		hw_csum_rx_error += rx_ring->rx_stats.csum_err;
+		hw_csum_rx_good += rx_ring->rx_stats.csum_good_cnt;
+		bytes += rx_ring->stats.bytes;
+		packets += rx_ring->stats.packets;
+
+	}
+
+	adapter->non_eop_descs = non_eop_descs;
+	adapter->alloc_rx_page_failed = alloc_rx_page_failed;
+	adapter->alloc_rx_buff_failed = alloc_rx_buff_failed;
+	adapter->hw_csum_rx_error = hw_csum_rx_error;
+	adapter->hw_csum_rx_good = hw_csum_rx_good;
+	net_stats->rx_bytes = bytes;
+	net_stats->rx_packets = packets;
+
+	bytes = 0;
+	packets = 0;
+	/* gather some stats to the adapter struct that are per queue */
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct ngbe_ring *tx_ring = adapter->tx_ring[i];
+		restart_queue += tx_ring->tx_stats.restart_queue;
+		tx_busy += tx_ring->tx_stats.tx_busy;
+		bytes += tx_ring->stats.bytes;
+		packets += tx_ring->stats.packets;
+	}
+	adapter->restart_queue = restart_queue;
+	adapter->tx_busy = tx_busy;
+	net_stats->tx_bytes = bytes;
+	net_stats->tx_packets = packets;
+
+	hwstats->crcerrs += rd32(hw, NGBE_RX_CRC_ERROR_FRAMES_LOW);
+
+	hwstats->gprc += rd32(hw, NGBE_PX_GPRC);
+
+	ngbe_update_xoff_rx_lfc(adapter);
+
+	hwstats->o2bgptc += rd32(hw, NGBE_TDM_OS2BMC_CNT);
+	if (ngbe_check_mng_access(&adapter->hw)) {
+		hwstats->o2bspc += rd32(hw, NGBE_MNG_OS2BMC_CNT);
+		hwstats->b2ospc += rd32(hw, NGBE_MNG_BMC2OS_CNT);
+	}
+	hwstats->b2ogprc += rd32(hw, NGBE_RDM_BMC2OS_CNT);
+	hwstats->gorc += rd32(hw, NGBE_PX_GORC_LSB);
+	hwstats->gorc += (u64)rd32(hw, NGBE_PX_GORC_MSB) << 32;
+
+	hwstats->gotc += rd32(hw, NGBE_PX_GOTC_LSB);
+	hwstats->gotc += (u64)rd32(hw, NGBE_PX_GOTC_MSB) << 32;
+
+
+	adapter->hw_rx_no_dma_resources +=
+				     rd32(hw, NGBE_RDM_DRP_PKT);
+	bprc = rd32(hw, NGBE_RX_BC_FRAMES_GOOD_LOW);
+	hwstats->bprc += bprc;
+	hwstats->mprc = 0;
+
+	for (i = 0; i < 8; i++)
+		hwstats->mprc += rd32(hw, NGBE_PX_MPRC(i));
+
+	hwstats->roc += rd32(hw, NGBE_RX_OVERSIZE_FRAMES_GOOD);
+	hwstats->rlec += rd32(hw, NGBE_RX_LEN_ERROR_FRAMES_LOW);
+	lxon = rd32(hw, NGBE_RDB_LXONTXC);
+	hwstats->lxontxc += lxon;
+	lxoff = rd32(hw, NGBE_RDB_LXOFFTXC);
+	hwstats->lxofftxc += lxoff;
+
+	hwstats->gptc += rd32(hw, NGBE_PX_GPTC);
+	hwstats->mptc += rd32(hw, NGBE_TX_MC_FRAMES_GOOD_LOW);
+	hwstats->ruc += rd32(hw, NGBE_RX_UNDERSIZE_FRAMES_GOOD);
+	hwstats->tpr += rd32(hw, NGBE_RX_FRAME_CNT_GOOD_BAD_LOW);
+	hwstats->bptc += rd32(hw, NGBE_TX_BC_FRAMES_GOOD_LOW);
+	/* Fill out the OS statistics structure */
+	net_stats->multicast = hwstats->mprc;
+
+	/* Rx Errors */
+	net_stats->rx_errors = hwstats->crcerrs +
+				       hwstats->rlec;
+	net_stats->rx_dropped = 0;
+	net_stats->rx_length_errors = hwstats->rlec;
+	net_stats->rx_crc_errors = hwstats->crcerrs;
+	total_mpc = rd32(hw, NGBE_RDB_MPCNT);
+	net_stats->rx_missed_errors = total_mpc;
+
+	/*
+	 * VF Stats Collection - skip while resetting because these
+	 * are not clear on read and otherwise you'll sometimes get
+	 * crazy values.
+	 */
+	if (!test_bit(__NGBE_RESETTING, &adapter->state)) {
+		for (i = 0; i < adapter->num_vfs; i++) {
+		UPDATE_VF_COUNTER_32bit(NGBE_VX_GPRC,             \
+				adapter->vfinfo->last_vfstats.gprc, \
+				adapter->vfinfo->vfstats.gprc);
+		UPDATE_VF_COUNTER_32bit(NGBE_VX_GPTC,             \
+				adapter->vfinfo->last_vfstats.gptc, \
+				adapter->vfinfo->vfstats.gptc);
+		UPDATE_VF_COUNTER_36bit(NGBE_VX_GORC_LSB,         \
+				NGBE_VX_GORC_MSB,                 \
+				adapter->vfinfo->last_vfstats.gorc, \
+				adapter->vfinfo->vfstats.gorc);
+		UPDATE_VF_COUNTER_36bit(NGBE_VX_GOTC_LSB,         \
+				NGBE_VX_GOTC_MSB,                 \
+				adapter->vfinfo->last_vfstats.gotc, \
+				adapter->vfinfo->vfstats.gotc);
+		UPDATE_VF_COUNTER_32bit(NGBE_VX_MPRC,             \
+				adapter->vfinfo->last_vfstats.mprc, \
+				adapter->vfinfo->vfstats.mprc);
+		}
+	}
+}
+
+/**
+ * ngbe_check_hang_subtask - check for hung queues and dropped interrupts
+ * @adapter - pointer to the device adapter structure
+ *
+ * This function serves two purposes.  First it strobes the interrupt lines
+ * in order to make certain interrupts are occurring.  Secondly it sets the
+ * bits needed to check for TX hangs.  As a result we should immediately
+ * determine if a hang has occurred.
+ */
+static void ngbe_check_hang_subtask(struct ngbe_adapter *adapter)
+{
+	int i;
+
+	/* If we're down or resetting, just bail */
+	if (test_bit(__NGBE_DOWN, &adapter->state) ||
+	    test_bit(__NGBE_REMOVING, &adapter->state) ||
+	    test_bit(__NGBE_RESETTING, &adapter->state))
+		return;
+
+	/* Force detection of hung controller */
+	if (netif_carrier_ok(adapter->netdev)) {
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			set_check_for_tx_hang(adapter->tx_ring[i]);
+	}
+}
+
+static void ngbe_watchdog_an_complete(struct ngbe_adapter *adapter)
+{
+	u32 link_speed = 0;
+	u32 lan_speed = 0;
+	bool link_up = true;
+	struct ngbe_hw *hw = &adapter->hw;
+
+	if (!(adapter->flags & NGBE_FLAG_NEED_ANC_CHECK))
+		return;
+
+	TCALL(hw, mac.ops.check_link, &link_speed, &link_up, false);
+
+	adapter->link_speed = link_speed;
+	switch (link_speed) {
+	case NGBE_LINK_SPEED_100_FULL:
+		lan_speed = 1;
+		break;
+	case NGBE_LINK_SPEED_1GB_FULL:
+		lan_speed = 2;
+		break;
+	case NGBE_LINK_SPEED_10_FULL:
+		lan_speed = 0;
+		break;
+	default:
+		break;
+	}
+	wr32m(hw, NGBE_CFG_LAN_SPEED,
+			0x3, lan_speed);
+
+	if (link_speed & (NGBE_LINK_SPEED_1GB_FULL |
+			NGBE_LINK_SPEED_100_FULL | NGBE_LINK_SPEED_10_FULL)) {
+		wr32(hw, NGBE_MAC_TX_CFG,
+			(rd32(hw, NGBE_MAC_TX_CFG) &
+			~NGBE_MAC_TX_CFG_SPEED_MASK) | NGBE_MAC_TX_CFG_TE |
+			NGBE_MAC_TX_CFG_SPEED_1G);
+	}
+
+	adapter->flags &= ~NGBE_FLAG_NEED_ANC_CHECK;
+	adapter->flags |= NGBE_FLAG_NEED_LINK_UPDATE;
+
+	return;
+}
+
+/**
+ * ngbe_watchdog_update_link - update the link status
+ * @adapter - pointer to the device adapter structure
+ * @link_speed - pointer to a u32 to store the link_speed
+ **/
+static void ngbe_watchdog_update_link_status(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 link_speed = adapter->link_speed;
+	bool link_up = adapter->link_up;
+	u32 lan_speed = 0;
+	u32 reg;
+
+#ifndef CONFIG_NGBE_POLL_LINK_STATUS
+	if (!(adapter->flags & NGBE_FLAG_NEED_LINK_UPDATE))
+		return;
+#endif
+	link_speed = NGBE_LINK_SPEED_1GB_FULL;
+	link_up = true;
+
+	TCALL(hw, mac.ops.check_link, &link_speed, &link_up, false);
+#ifndef CONFIG_NGBE_POLL_LINK_STATUS
+	if (link_up || time_after(jiffies, (adapter->link_check_timeout +
+		NGBE_TRY_LINK_TIMEOUT))) {
+		adapter->flags &= ~NGBE_FLAG_NEED_LINK_UPDATE;
+	}
+#else
+	if (adapter->link_up == link_up &&
+		adapter->link_speed == link_speed)
+		return;
+#endif
+
+	adapter->link_speed = link_speed;
+	switch (link_speed) {
+	case NGBE_LINK_SPEED_100_FULL:
+		lan_speed = 1;
+		break;
+	case NGBE_LINK_SPEED_1GB_FULL:
+		lan_speed = 2;
+		break;
+	case NGBE_LINK_SPEED_10_FULL:
+		lan_speed = 0;
+		break;
+	default:
+		break;
+	}
+	wr32m(hw, NGBE_CFG_LAN_SPEED,
+			0x3, lan_speed);
+
+	if (link_up) {
+		TCALL(hw, mac.ops.fc_enable);
+		ngbe_set_rx_drop_en(adapter);
+	}
+
+	if (link_up) {
+		adapter->last_rx_ptp_check = jiffies;
+
+		if (test_bit(__NGBE_PTP_RUNNING, &adapter->state))
+			ngbe_ptp_start_cyclecounter(adapter);
+
+		if (link_speed & (NGBE_LINK_SPEED_1GB_FULL |
+				NGBE_LINK_SPEED_100_FULL | NGBE_LINK_SPEED_10_FULL)) {
+			wr32(hw, NGBE_MAC_TX_CFG,
+				(rd32(hw, NGBE_MAC_TX_CFG) &
+				~NGBE_MAC_TX_CFG_SPEED_MASK) | NGBE_MAC_TX_CFG_TE |
+				NGBE_MAC_TX_CFG_SPEED_1G);
+		}
+
+		/* Re configure MAC RX */
+		reg = rd32(hw, NGBE_MAC_RX_CFG);
+		wr32(hw, NGBE_MAC_RX_CFG, reg);
+		wr32(hw, NGBE_MAC_PKT_FLT, NGBE_MAC_PKT_FLT_PR);
+		reg = rd32(hw, NGBE_MAC_WDG_TIMEOUT);
+		wr32(hw, NGBE_MAC_WDG_TIMEOUT, reg);
+	}
+
+	adapter->link_up = link_up;
+	if (hw->mac.ops.dmac_config && hw->mac.dmac_config.watchdog_timer) {
+		u8 num_tcs = netdev_get_num_tc(adapter->netdev);
+
+		if (hw->mac.dmac_config.link_speed != link_speed ||
+			hw->mac.dmac_config.num_tcs != num_tcs) {
+			hw->mac.dmac_config.link_speed = link_speed;
+			hw->mac.dmac_config.num_tcs = num_tcs;
+			TCALL(hw, mac.ops.dmac_config);
+		}
+	}
+	return;
+}
+
+static void ngbe_update_default_up(struct ngbe_adapter *adapter)
+{
+	u8 up = 0;
+	adapter->default_up = up;
+}
+
+/**
+ * ngbe_watchdog_link_is_up - update netif_carrier status and
+ *                             print link up message
+ * @adapter - pointer to the device adapter structure
+ **/
+static void ngbe_watchdog_link_is_up(struct ngbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 link_speed = adapter->link_speed;
+	bool flow_rx, flow_tx;
+
+	/* only continue if link was previously down */
+	if (netif_carrier_ok(netdev))
+		return;
+
+	adapter->flags2 &= ~NGBE_FLAG2_SEARCH_FOR_SFP;
+
+	/* flow_rx, flow_tx report link flow control status */
+	flow_rx = (rd32(hw, NGBE_MAC_RX_FLOW_CTRL) & 0x101) == 0x1;
+	flow_tx = !!(NGBE_RDB_RFCC_RFCE_802_3X &
+				rd32(hw, NGBE_RDB_RFCC));
+
+	e_info(drv, "NIC Link is Up %s, Flow Control: %s\n",
+			(link_speed == NGBE_LINK_SPEED_1GB_FULL ?
+			"1 Gbps" :
+			(link_speed == NGBE_LINK_SPEED_100_FULL ?
+			"100 Mbps" :
+			(link_speed == NGBE_LINK_SPEED_10_FULL ?
+			"10 Mbps" :
+			"unknown speed"))),
+			((flow_rx && flow_tx) ? "RX/TX" :
+			(flow_rx ? "RX" :
+			(flow_tx ? "TX" : "None"))));
+
+	netif_carrier_on(netdev);
+	netif_tx_wake_all_queues(netdev);
+
+	/* update the default user priority for VFs */
+	ngbe_update_default_up(adapter);
+
+	/* ping all the active vfs to let them know link has changed */
+	ngbe_ping_all_vfs(adapter);
+}
+
+/**
+ * ngbe_watchdog_link_is_down - update netif_carrier status and
+ *                               print link down message
+ * @adapter - pointer to the adapter structure
+ **/
+static void ngbe_watchdog_link_is_down(struct ngbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+
+	adapter->link_up = false;
+	adapter->link_speed = 0;
+
+	/* only continue if link was up previously */
+	if (!netif_carrier_ok(netdev))
+		return;
+
+	if (test_bit(__NGBE_PTP_RUNNING, &adapter->state))
+		ngbe_ptp_start_cyclecounter(adapter);
+
+	e_info(drv, "NIC Link is Down\n");
+	netif_carrier_off(netdev);
+	netif_tx_stop_all_queues(netdev);
+
+	/* ping all the active vfs to let them know link has changed */
+	ngbe_ping_all_vfs(adapter);
+}
+
+static bool ngbe_ring_tx_pending(struct ngbe_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct ngbe_ring *tx_ring = adapter->tx_ring[i];
+
+		if (tx_ring->next_to_use != tx_ring->next_to_clean)
+			return true;
+	}
+
+	return false;
+}
+
+static bool ngbe_vf_tx_pending(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 q_per_pool = 1;
+
+	u32 i, j;
+
+	if (!adapter->num_vfs)
+		return false;
+
+	for (i = 0; i < adapter->num_vfs; i++) {
+		for (j = 0; j < q_per_pool; j++) {
+			u32 h, t;
+
+			h = rd32(hw,
+						NGBE_PX_TR_RPn(q_per_pool, i, j));
+			t = rd32(hw,
+						NGBE_PX_TR_WPn(q_per_pool, i, j));
+
+			if (h != t)
+				return true;
+		}
+	}
+
+	return false;
+}
+
+/**
+ * ngbe_watchdog_flush_tx - flush queues on link down
+ * @adapter - pointer to the device adapter structure
+ **/
+static void ngbe_watchdog_flush_tx(struct ngbe_adapter *adapter)
+{
+	if (!netif_carrier_ok(adapter->netdev)) {
+		if (ngbe_ring_tx_pending(adapter) ||
+			ngbe_vf_tx_pending(adapter)) {
+			/* We've lost link, so the controller stops DMA,
+			 * but we've got queued Tx work that's never going
+			 * to get done, so reset controller to flush Tx.
+			 * (Do the reset outside of interrupt context).
+			 */
+			e_warn(drv, "initiating reset due to lost link with "
+				"pending Tx work\n");
+			adapter->flags2 |= NGBE_FLAG2_PF_RESET_REQUESTED;
+		}
+	}
+}
+
+#ifdef CONFIG_PCI_IOV
+static inline void ngbe_issue_vf_flr(struct ngbe_adapter *adapter,
+				      struct pci_dev *vfdev)
+{
+	int pos, i;
+	u16 status;
+
+	/* wait for pending transactions on the bus */
+	for (i = 0; i < 4; i++) {
+		if (i)
+			msleep((1 << (i - 1)) * 100);
+
+		pcie_capability_read_word(vfdev, PCI_EXP_DEVSTA, &status);
+		if (!(status & PCI_EXP_DEVSTA_TRPND))
+			goto clear;
+	}
+
+	e_dev_warn("Issuing VFLR with pending transactions\n");
+
+clear:
+	pos = pci_find_capability(vfdev, PCI_CAP_ID_EXP);
+	if (!pos)
+		return;
+
+	e_dev_err("Issuing VFLR for VF %s\n", pci_name(vfdev));
+	pci_write_config_word(vfdev, pos + PCI_EXP_DEVCTL,
+			      PCI_EXP_DEVCTL_BCR_FLR);
+	msleep(100);
+}
+
+
+static void ngbe_spoof_check(struct ngbe_adapter *adapter)
+{
+	u32 ssvpc;
+
+	/* Do not perform spoof check if in non-IOV mode */
+	if (adapter->num_vfs == 0)
+		return;
+	ssvpc = rd32(&adapter->hw, NGBE_TDM_SEC_DRP);
+
+	/*
+	 * ssvpc register is cleared on read, if zero then no
+	 * spoofed packets in the last interval.
+	 */
+	if (!ssvpc)
+		return;
+
+	e_warn(drv, "%d Spoofed packets detected\n", ssvpc);
+}
+#endif /* CONFIG_PCI_IOV */
+
+/**
+ * ngbe_watchdog_subtask - check and bring link up
+ * @adapter - pointer to the device adapter structure
+ **/
+static void ngbe_watchdog_subtask(struct ngbe_adapter *adapter)
+{
+	/* if interface is down do nothing */
+	if (test_bit(__NGBE_DOWN, &adapter->state) ||
+		test_bit(__NGBE_REMOVING, &adapter->state) ||
+		test_bit(__NGBE_RESETTING, &adapter->state))
+		return;
+
+	ngbe_watchdog_an_complete(adapter);
+#ifndef CONFIG_NGBE_POLL_LINK_STATUS
+	ngbe_watchdog_update_link_status(adapter);
+
+	if (adapter->link_up)
+		ngbe_watchdog_link_is_up(adapter);
+	else
+		ngbe_watchdog_link_is_down(adapter);
+#endif
+#ifdef CONFIG_PCI_IOV
+	ngbe_spoof_check(adapter);
+#endif /* CONFIG_PCI_IOV */
+
+	ngbe_update_stats(adapter);
+	ngbe_watchdog_flush_tx(adapter);
+}
+
+/**
+ * ngbe_service_timer - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void ngbe_service_timer(struct timer_list *t)
+{
+	struct ngbe_adapter *adapter = from_timer(adapter, t, service_timer);
+	unsigned long next_event_offset;
+	struct ngbe_hw *hw = &adapter->hw;
+
+	/* poll faster when waiting for link */
+	if ((adapter->flags & NGBE_FLAG_NEED_LINK_UPDATE) ||
+		(adapter->flags & NGBE_FLAG_NEED_ANC_CHECK))
+		next_event_offset = HZ / 10;
+	else
+		next_event_offset = HZ * 2;
+
+	if ((rd32(&adapter->hw, NGBE_MIS_PF_SM) == 1) && (hw->bus.lan_id)) {
+		adapter->flags2 |= NGBE_FLAG2_PCIE_NEED_RECOVER;
+	}
+
+	/* Reset the timer */
+	mod_timer(&adapter->service_timer, next_event_offset + jiffies);
+
+	ngbe_service_event_schedule(adapter);
+}
+
+#ifdef CONFIG_NGBE_POLL_LINK_STATUS
+static void ngbe_link_check_timer(struct timer_list *t)
+{
+	struct ngbe_adapter *adapter = from_timer(adapter, t, link_check_timer);
+	unsigned long next_event_offset = HZ / 1000;
+
+	mod_timer(&adapter->link_check_timer, next_event_offset + jiffies);
+		/* if interface is down do nothing */
+	if (test_bit(__NGBE_DOWN, &adapter->state) ||
+		test_bit(__NGBE_REMOVING, &adapter->state) ||
+		test_bit(__NGBE_RESETTING, &adapter->state))
+		return;
+
+	ngbe_watchdog_update_link_status(adapter);
+
+	if (adapter->link_up)
+		ngbe_watchdog_link_is_up(adapter);
+	else
+		ngbe_watchdog_link_is_down(adapter);
+}
+#endif
+
+static void ngbe_reset_subtask(struct ngbe_adapter *adapter)
+{
+	u32 reset_flag = 0;
+	u32 value = 0;
+
+	if (!(adapter->flags2 & (NGBE_FLAG2_PF_RESET_REQUESTED |
+		NGBE_FLAG2_DEV_RESET_REQUESTED |
+		NGBE_FLAG2_GLOBAL_RESET_REQUESTED |
+		NGBE_FLAG2_RESET_INTR_RECEIVED)))
+		return;
+
+	/* If we're already down, just bail */
+	if (test_bit(__NGBE_DOWN, &adapter->state) ||
+		test_bit(__NGBE_REMOVING, &adapter->state))
+		return;
+
+	netdev_err(adapter->netdev, "Reset adapter\n");
+	adapter->tx_timeout_count++;
+
+	rtnl_lock();
+	if (adapter->flags2 & NGBE_FLAG2_GLOBAL_RESET_REQUESTED) {
+		reset_flag |= NGBE_FLAG2_GLOBAL_RESET_REQUESTED;
+		adapter->flags2 &= ~NGBE_FLAG2_GLOBAL_RESET_REQUESTED;
+	}
+	if (adapter->flags2 & NGBE_FLAG2_DEV_RESET_REQUESTED) {
+		reset_flag |= NGBE_FLAG2_DEV_RESET_REQUESTED;
+		adapter->flags2 &= ~NGBE_FLAG2_DEV_RESET_REQUESTED;
+	}
+	if (adapter->flags2 & NGBE_FLAG2_PF_RESET_REQUESTED) {
+		reset_flag |= NGBE_FLAG2_PF_RESET_REQUESTED;
+		adapter->flags2 &= ~NGBE_FLAG2_PF_RESET_REQUESTED;
+	}
+
+	if (adapter->flags2 & NGBE_FLAG2_RESET_INTR_RECEIVED) {
+		/* If there's a recovery already waiting, it takes
+		* precedence before starting a new reset sequence.
+		*/
+		adapter->flags2 &= ~NGBE_FLAG2_RESET_INTR_RECEIVED;
+		value = rd32m(&adapter->hw, NGBE_MIS_RST_ST,
+				NGBE_MIS_RST_ST_DEV_RST_TYPE_MASK) >>
+				NGBE_MIS_RST_ST_DEV_RST_TYPE_SHIFT;
+		if (value == NGBE_MIS_RST_ST_DEV_RST_TYPE_SW_RST) {
+			adapter->hw.reset_type = NGBE_SW_RESET;
+
+		} else if (value == NGBE_MIS_RST_ST_DEV_RST_TYPE_GLOBAL_RST)
+			adapter->hw.reset_type = NGBE_GLOBAL_RESET;
+		adapter->hw.force_full_reset = true;
+		ngbe_reinit_locked(adapter);
+		adapter->hw.force_full_reset = false;
+		goto unlock;
+	}
+
+	if (reset_flag & NGBE_FLAG2_DEV_RESET_REQUESTED) {
+		/* Request a Device Reset
+		 *
+		 * This will start the chip's countdown to the actual full
+		 * chip reset event, and a warning interrupt to be sent
+		 * to all PFs, including the requestor.  Our handler
+		 * for the warning interrupt will deal with the shutdown
+		 * and recovery of the switch setup.
+		 */
+		/*debug to open*/
+		/*ngbe_dump(adapter);*/
+
+		wr32m(&adapter->hw, NGBE_MIS_RST,
+			NGBE_MIS_RST_SW_RST, NGBE_MIS_RST_SW_RST);
+		e_info(drv, "ngbe_reset_subtask: sw reset\n");
+
+	} else if (reset_flag & NGBE_FLAG2_PF_RESET_REQUESTED) {
+		/*debug to open*/
+		/*ngbe_dump(adapter);*/
+		ngbe_reinit_locked(adapter);
+	} else if (reset_flag & NGBE_FLAG2_GLOBAL_RESET_REQUESTED) {
+		/* Request a Global Reset
+		 *
+		 * This will start the chip's countdown to the actual full
+		 * chip reset event, and a warning interrupt to be sent
+		 * to all PFs, including the requestor.  Our handler
+		 * for the warning interrupt will deal with the shutdown
+		 * and recovery of the switch setup.
+		 */
+		/*debug to open*/
+		/*ngbe_dump(adapter);*/
+		pci_save_state(adapter->pdev);
+		if (ngbe_mng_present(&adapter->hw)) {
+			ngbe_reset_hostif(&adapter->hw);
+		e_info(drv, "ngbe_reset_subtask: lan reset\n");
+
+		} else {
+			wr32m(&adapter->hw, NGBE_MIS_RST,
+				NGBE_MIS_RST_GLOBAL_RST,
+				NGBE_MIS_RST_GLOBAL_RST);
+			e_info(drv, "ngbe_reset_subtask: global reset\n");
+		}
+	}
+
+unlock:
+	rtnl_unlock();
+}
+
+static void ngbe_check_pcie_subtask(struct ngbe_adapter *adapter)
+{
+	if (!(adapter->flags2 & NGBE_FLAG2_PCIE_NEED_RECOVER))
+		return;
+
+	e_info(probe, "do recovery\n");
+	ngbe_pcie_do_recovery(adapter->pdev);
+	wr32m(&adapter->hw, NGBE_MIS_PF_SM,
+		NGBE_MIS_PF_SM_SM, 0);
+	adapter->flags2 &= ~NGBE_FLAG2_PCIE_NEED_RECOVER;
+}
+
+
+/**
+ * ngbe_service_task - manages and runs subtasks
+ * @work: pointer to work_struct containing our data
+ **/
+static void ngbe_service_task(struct work_struct *work)
+{
+	struct ngbe_adapter *adapter = container_of(work,
+								struct ngbe_adapter,
+								service_task);
+	if (NGBE_REMOVED(adapter->hw.hw_addr)) {
+		if (!test_bit(__NGBE_DOWN, &adapter->state)) {
+			rtnl_lock();
+			ngbe_down(adapter);
+			rtnl_unlock();
+		}
+		ngbe_service_event_complete(adapter);
+		return;
+	}
+
+	ngbe_check_pcie_subtask(adapter);
+	ngbe_reset_subtask(adapter);
+	ngbe_check_overtemp_subtask(adapter);
+	ngbe_watchdog_subtask(adapter);
+	ngbe_check_hang_subtask(adapter);
+
+	if (test_bit(__NGBE_PTP_RUNNING, &adapter->state)) {
+		ngbe_ptp_overflow_check(adapter);
+		if (unlikely(adapter->flags &
+			NGBE_FLAG_RX_HWTSTAMP_IN_REGISTER))
+			ngbe_ptp_rx_hang(adapter);
+	}
+
+	ngbe_service_event_complete(adapter);
+}
+
+static u8 get_ipv6_proto(struct sk_buff *skb, int offset)
+{
+	struct ipv6hdr *hdr = (struct ipv6hdr *)(skb->data + offset);
+	u8 nexthdr = hdr->nexthdr;
+
+	offset += sizeof(struct ipv6hdr);
+
+	while (ipv6_ext_hdr(nexthdr)) {
+		struct ipv6_opt_hdr _hdr, *hp;
+
+		if (nexthdr == NEXTHDR_NONE)
+			break;
+
+		hp = skb_header_pointer(skb, offset, sizeof(_hdr), &_hdr);
+		if (!hp)
+			break;
+
+		if (nexthdr == NEXTHDR_FRAGMENT) {
+			break;
+		} else if (nexthdr == NEXTHDR_AUTH) {
+			offset +=  ipv6_authlen(hp);
+		} else {
+			offset +=  ipv6_optlen(hp);
+		}
+
+		nexthdr = hp->nexthdr;
+	}
+
+	return nexthdr;
+}
+
+union network_header {
+	struct iphdr *ipv4;
+	struct ipv6hdr *ipv6;
+	void *raw;
+};
+
+static ngbe_dptype encode_tx_desc_ptype(const struct ngbe_tx_buffer *first)
+{
+	struct sk_buff *skb = first->skb;
+	u8 tun_prot = 0;
+	u8 l4_prot = 0;
+	u8 ptype = 0;
+
+	if (skb->encapsulation) {
+		union network_header hdr;
+
+		switch (first->protocol) {
+		case __constant_htons(ETH_P_IP):
+			tun_prot = ip_hdr(skb)->protocol;
+			if (ip_hdr(skb)->frag_off & htons(IP_MF | IP_OFFSET))
+				goto encap_frag;
+			ptype = NGBE_PTYPE_TUN_IPV4;
+			break;
+		case __constant_htons(ETH_P_IPV6):
+			tun_prot = get_ipv6_proto(skb, skb_network_offset(skb));
+			if (tun_prot == NEXTHDR_FRAGMENT)
+				goto encap_frag;
+			ptype = NGBE_PTYPE_TUN_IPV6;
+			break;
+		default:
+			goto exit;
+		}
+
+		if (tun_prot == IPPROTO_IPIP) {
+			hdr.raw = (void *)inner_ip_hdr(skb);
+			ptype |= NGBE_PTYPE_PKT_IPIP;
+		} else if (tun_prot == IPPROTO_UDP) {
+			hdr.raw = (void *)inner_ip_hdr(skb);
+		} else {
+			goto exit;
+		}
+
+		switch (hdr.ipv4->version) {
+		case IPVERSION:
+			l4_prot = hdr.ipv4->protocol;
+			if (hdr.ipv4->frag_off & htons(IP_MF | IP_OFFSET)) {
+				ptype |= NGBE_PTYPE_TYP_IPFRAG;
+				goto exit;
+			}
+			break;
+		case 6:
+			l4_prot = get_ipv6_proto(skb,
+						 skb_inner_network_offset(skb));
+			ptype |= NGBE_PTYPE_PKT_IPV6;
+			if (l4_prot == NEXTHDR_FRAGMENT) {
+				ptype |= NGBE_PTYPE_TYP_IPFRAG;
+				goto exit;
+			}
+			break;
+		default:
+			goto exit;
+		}
+	} else {
+encap_frag:
+		switch (first->protocol) {
+		case __constant_htons(ETH_P_IP):
+			l4_prot = ip_hdr(skb)->protocol;
+			ptype = NGBE_PTYPE_PKT_IP;
+			if (ip_hdr(skb)->frag_off & htons(IP_MF | IP_OFFSET)) {
+				ptype |= NGBE_PTYPE_TYP_IPFRAG;
+				goto exit;
+			}
+			break;
+#ifdef NETIF_F_IPV6_CSUM
+		case __constant_htons(ETH_P_IPV6):
+			l4_prot = get_ipv6_proto(skb, skb_network_offset(skb));
+			ptype = NGBE_PTYPE_PKT_IP | NGBE_PTYPE_PKT_IPV6;
+			if (l4_prot == NEXTHDR_FRAGMENT) {
+				ptype |= NGBE_PTYPE_TYP_IPFRAG;
+				goto exit;
+			}
+			break;
+#endif /* NETIF_F_IPV6_CSUM */
+		case __constant_htons(ETH_P_1588):
+			ptype = NGBE_PTYPE_L2_TS;
+			goto exit;
+		case __constant_htons(ETH_P_FIP):
+			ptype = NGBE_PTYPE_L2_FIP;
+			goto exit;
+		case __constant_htons(NGBE_ETH_P_LLDP):
+			ptype = NGBE_PTYPE_L2_LLDP;
+			goto exit;
+		case __constant_htons(NGBE_ETH_P_CNM):
+			ptype = NGBE_PTYPE_L2_CNM;
+			goto exit;
+		case __constant_htons(ETH_P_PAE):
+			ptype = NGBE_PTYPE_L2_EAPOL;
+			goto exit;
+		case __constant_htons(ETH_P_ARP):
+			ptype = NGBE_PTYPE_L2_ARP;
+			goto exit;
+		default:
+			ptype = NGBE_PTYPE_L2_MAC;
+			goto exit;
+		}
+	}
+
+	switch (l4_prot) {
+	case IPPROTO_TCP:
+		ptype |= NGBE_PTYPE_TYP_TCP;
+		break;
+	case IPPROTO_UDP:
+		ptype |= NGBE_PTYPE_TYP_UDP;
+		break;
+	case IPPROTO_SCTP:
+		ptype |= NGBE_PTYPE_TYP_SCTP;
+		break;
+	default:
+		ptype |= NGBE_PTYPE_TYP_IP;
+		break;
+	}
+
+exit:
+	return ngbe_decode_ptype(ptype);
+}
+
+static int ngbe_tso(struct ngbe_ring *tx_ring,
+					struct ngbe_tx_buffer *first,
+					u8 *hdr_len,  ngbe_dptype dptype)
+{
+	struct sk_buff *skb = first->skb;
+	u32 vlan_macip_lens, type_tucmd;
+	u32 mss_l4len_idx, l4len;
+	struct tcphdr *tcph;
+	struct iphdr *iph;
+	u32 tunhdr_eiplen_tunlen = 0;
+	u8 tun_prot = 0;
+	bool enc = skb->encapsulation;
+
+		struct ipv6hdr *ipv6h;
+
+
+	if (skb->ip_summed != CHECKSUM_PARTIAL)
+		return 0;
+
+	if (!skb_is_gso(skb))
+		return 0;
+
+	if (skb_header_cloned(skb)) {
+		int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+		if (err)
+			return err;
+	}
+
+	iph = enc ? inner_ip_hdr(skb) : ip_hdr(skb);
+	if (iph->version == 4) {
+		tcph = enc ? inner_tcp_hdr(skb) : tcp_hdr(skb);
+		iph->tot_len = 0;
+		iph->check = 0;
+		tcph->check = ~csum_tcpudp_magic(iph->saddr,
+						iph->daddr, 0,
+						IPPROTO_TCP,
+						0);
+		first->tx_flags |= NGBE_TX_FLAGS_TSO |
+						   NGBE_TX_FLAGS_CSUM |
+						   NGBE_TX_FLAGS_IPV4 |
+						   NGBE_TX_FLAGS_CC;
+	} else if (iph->version == 6 && skb_is_gso_v6(skb)) {
+		ipv6h = enc ? inner_ipv6_hdr(skb) : ipv6_hdr(skb);
+		tcph = enc ? inner_tcp_hdr(skb) : tcp_hdr(skb);
+		ipv6h->payload_len = 0;
+		tcph->check =
+		    ~csum_ipv6_magic(&ipv6h->saddr,
+				     &ipv6h->daddr,
+				     0, IPPROTO_TCP, 0);
+		first->tx_flags |= NGBE_TX_FLAGS_TSO |
+							NGBE_TX_FLAGS_CSUM |
+							NGBE_TX_FLAGS_CC;
+
+	}
+
+	/* compute header lengths */
+	l4len = enc ? inner_tcp_hdrlen(skb) : tcp_hdrlen(skb);
+	*hdr_len = enc ? (skb_inner_transport_header(skb) - skb->data)
+		       : skb_transport_offset(skb);
+	*hdr_len += l4len;
+
+	/* update gso size and bytecount with header size */
+	first->gso_segs = skb_shinfo(skb)->gso_segs;
+	first->bytecount += (first->gso_segs - 1) * *hdr_len;
+
+	/* mss_l4len_id: use 0 as index for TSO */
+	mss_l4len_idx = l4len << NGBE_TXD_L4LEN_SHIFT;
+	mss_l4len_idx |= skb_shinfo(skb)->gso_size << NGBE_TXD_MSS_SHIFT;
+
+	/* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */
+	if (enc) {
+		switch (first->protocol) {
+		case __constant_htons(ETH_P_IP):
+			tun_prot = ip_hdr(skb)->protocol;
+			first->tx_flags |= NGBE_TX_FLAGS_OUTER_IPV4;
+			break;
+		case __constant_htons(ETH_P_IPV6):
+			tun_prot = ipv6_hdr(skb)->nexthdr;
+			break;
+		default:
+			break;
+		}
+		switch (tun_prot) {
+		case IPPROTO_UDP:
+			tunhdr_eiplen_tunlen = NGBE_TXD_TUNNEL_UDP;
+			tunhdr_eiplen_tunlen |=
+					((skb_network_header_len(skb) >> 2) <<
+					NGBE_TXD_OUTER_IPLEN_SHIFT) |
+					(((skb_inner_mac_header(skb) -
+					skb_transport_header(skb)) >> 1) <<
+					NGBE_TXD_TUNNEL_LEN_SHIFT);
+			break;
+		case IPPROTO_GRE:
+			tunhdr_eiplen_tunlen = NGBE_TXD_TUNNEL_GRE;
+			tunhdr_eiplen_tunlen |=
+					((skb_network_header_len(skb) >> 2) <<
+					NGBE_TXD_OUTER_IPLEN_SHIFT) |
+					(((skb_inner_mac_header(skb) -
+					skb_transport_header(skb)) >> 1) <<
+					NGBE_TXD_TUNNEL_LEN_SHIFT);
+			break;
+		case IPPROTO_IPIP:
+			tunhdr_eiplen_tunlen = (((char *)inner_ip_hdr(skb)-
+						(char *)ip_hdr(skb)) >> 2) <<
+						NGBE_TXD_OUTER_IPLEN_SHIFT;
+			break;
+		default:
+			break;
+		}
+
+		vlan_macip_lens = skb_inner_network_header_len(skb) >> 1;
+	} else
+		vlan_macip_lens = skb_network_header_len(skb) >> 1;
+
+	vlan_macip_lens |= skb_network_offset(skb) << NGBE_TXD_MACLEN_SHIFT;
+	vlan_macip_lens |= first->tx_flags & NGBE_TX_FLAGS_VLAN_MASK;
+
+	type_tucmd = dptype.ptype << 24;
+	ngbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, tunhdr_eiplen_tunlen,
+		type_tucmd, mss_l4len_idx);
+
+	return 1;
+}
+
+static void ngbe_tx_csum(struct ngbe_ring *tx_ring,
+			  struct ngbe_tx_buffer *first, ngbe_dptype dptype)
+{
+	struct sk_buff *skb = first->skb;
+	u32 vlan_macip_lens = 0;
+	u32 mss_l4len_idx = 0;
+	u32 tunhdr_eiplen_tunlen = 0;
+	u8 tun_prot = 0;
+	u32 type_tucmd;
+
+	if (skb->ip_summed != CHECKSUM_PARTIAL) {
+		if (!(first->tx_flags & NGBE_TX_FLAGS_HW_VLAN) &&
+		    !(first->tx_flags & NGBE_TX_FLAGS_CC))
+			return;
+		vlan_macip_lens = skb_network_offset(skb) <<
+				  NGBE_TXD_MACLEN_SHIFT;
+	} else {
+		u8 l4_prot = 0;
+		union {
+			struct iphdr *ipv4;
+			struct ipv6hdr *ipv6;
+			u8 *raw;
+		} network_hdr;
+		union {
+			struct tcphdr *tcphdr;
+			u8 *raw;
+		} transport_hdr;
+
+		if (skb->encapsulation) {
+			network_hdr.raw = skb_inner_network_header(skb);
+			transport_hdr.raw = skb_inner_transport_header(skb);
+			vlan_macip_lens = skb_network_offset(skb) <<
+					  NGBE_TXD_MACLEN_SHIFT;
+			switch (first->protocol) {
+			case __constant_htons(ETH_P_IP):
+				tun_prot = ip_hdr(skb)->protocol;
+				break;
+			case __constant_htons(ETH_P_IPV6):
+				tun_prot = ipv6_hdr(skb)->nexthdr;
+				break;
+			default:
+				if (unlikely(net_ratelimit())) {
+					dev_warn(tx_ring->dev,
+					 "partial checksum but version=%d\n",
+					 network_hdr.ipv4->version);
+				}
+				return;
+			}
+			switch (tun_prot) {
+			case IPPROTO_UDP:
+				tunhdr_eiplen_tunlen = NGBE_TXD_TUNNEL_UDP;
+				tunhdr_eiplen_tunlen |=
+					((skb_network_header_len(skb) >> 2) <<
+					NGBE_TXD_OUTER_IPLEN_SHIFT) |
+					(((skb_inner_mac_header(skb) -
+					skb_transport_header(skb)) >> 1) <<
+					NGBE_TXD_TUNNEL_LEN_SHIFT);
+				break;
+			case IPPROTO_GRE:
+				tunhdr_eiplen_tunlen = NGBE_TXD_TUNNEL_GRE;
+				tunhdr_eiplen_tunlen |=
+					((skb_network_header_len(skb) >> 2) <<
+					NGBE_TXD_OUTER_IPLEN_SHIFT) |
+					(((skb_inner_mac_header(skb) -
+					skb_transport_header(skb)) >> 1) <<
+					NGBE_TXD_TUNNEL_LEN_SHIFT);
+				break;
+			case IPPROTO_IPIP:
+				tunhdr_eiplen_tunlen =
+					(((char *)inner_ip_hdr(skb)-
+					(char *)ip_hdr(skb)) >> 2) <<
+					NGBE_TXD_OUTER_IPLEN_SHIFT;
+				break;
+			default:
+				break;
+			}
+
+		} else {
+			network_hdr.raw = skb_network_header(skb);
+			transport_hdr.raw = skb_transport_header(skb);
+			vlan_macip_lens = skb_network_offset(skb) <<
+					  NGBE_TXD_MACLEN_SHIFT;
+		}
+
+		switch (network_hdr.ipv4->version) {
+		case IPVERSION:
+			vlan_macip_lens |=
+				(transport_hdr.raw - network_hdr.raw) >> 1;
+			l4_prot = network_hdr.ipv4->protocol;
+			break;
+		case 6:
+			vlan_macip_lens |=
+				(transport_hdr.raw - network_hdr.raw) >> 1;
+			l4_prot = network_hdr.ipv6->nexthdr;
+			break;
+		default:
+			break;
+		}
+
+		switch (l4_prot) {
+		case IPPROTO_TCP:
+		mss_l4len_idx = (transport_hdr.tcphdr->doff * 4) <<
+				NGBE_TXD_L4LEN_SHIFT;
+			break;
+		case IPPROTO_SCTP:
+			mss_l4len_idx = sizeof(struct sctphdr) <<
+					NGBE_TXD_L4LEN_SHIFT;
+			break;
+		case IPPROTO_UDP:
+			mss_l4len_idx = sizeof(struct udphdr) <<
+					NGBE_TXD_L4LEN_SHIFT;
+			break;
+		default:
+			break;
+		}
+
+		/* update TX checksum flag */
+		first->tx_flags |= NGBE_TX_FLAGS_CSUM;
+	}
+	first->tx_flags |= NGBE_TX_FLAGS_CC;
+	/* vlan_macip_lens: MACLEN, VLAN tag */
+	vlan_macip_lens |= first->tx_flags & NGBE_TX_FLAGS_VLAN_MASK;
+
+	type_tucmd = dptype.ptype << 24;
+	ngbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, tunhdr_eiplen_tunlen,
+			 type_tucmd, mss_l4len_idx);
+}
+
+static u32 ngbe_tx_cmd_type(u32 tx_flags)
+{
+	/* set type for advanced descriptor with frame checksum insertion */
+	u32 cmd_type = NGBE_TXD_DTYP_DATA |
+					NGBE_TXD_IFCS;
+
+	/* set HW vlan bit if vlan is present */
+	cmd_type |= NGBE_SET_FLAG(tx_flags, NGBE_TX_FLAGS_HW_VLAN,
+					NGBE_TXD_VLE);
+
+	/* set segmentation enable bits for TSO/FSO */
+	cmd_type |= NGBE_SET_FLAG(tx_flags, NGBE_TX_FLAGS_TSO,
+					NGBE_TXD_TSE);
+
+	/* set timestamp bit if present */
+	cmd_type |= NGBE_SET_FLAG(tx_flags, NGBE_TX_FLAGS_TSTAMP,
+					NGBE_TXD_MAC_TSTAMP);
+
+	cmd_type |= NGBE_SET_FLAG(tx_flags, NGBE_TX_FLAGS_LINKSEC,
+					NGBE_TXD_LINKSEC);
+
+	return cmd_type;
+}
+
+static void ngbe_tx_olinfo_status(union ngbe_tx_desc *tx_desc,
+					u32 tx_flags, unsigned int paylen)
+{
+	u32 olinfo_status = paylen << NGBE_TXD_PAYLEN_SHIFT;
+
+	/* enable L4 checksum for TSO and TX checksum offload */
+	olinfo_status |= NGBE_SET_FLAG(tx_flags,
+					NGBE_TX_FLAGS_CSUM,
+					NGBE_TXD_L4CS);
+
+	/* enble IPv4 checksum for TSO */
+	olinfo_status |= NGBE_SET_FLAG(tx_flags,
+					NGBE_TX_FLAGS_IPV4,
+					NGBE_TXD_IIPCS);
+	/* enable outer IPv4 checksum for TSO */
+	olinfo_status |= NGBE_SET_FLAG(tx_flags,
+					NGBE_TX_FLAGS_OUTER_IPV4,
+					NGBE_TXD_EIPCS);
+	/*
+	 * Check Context must be set if Tx switch is enabled, which it
+	 * always is for case where virtual functions are running
+	 */
+	olinfo_status |= NGBE_SET_FLAG(tx_flags,
+					NGBE_TX_FLAGS_CC,
+					NGBE_TXD_CC);
+
+	olinfo_status |= NGBE_SET_FLAG(tx_flags,
+					NGBE_TX_FLAGS_IPSEC,
+					NGBE_TXD_IPSEC);
+
+	tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
+}
+
+static int __ngbe_maybe_stop_tx(struct ngbe_ring *tx_ring, u16 size)
+{
+	netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index);
+
+	/* Herbert's original patch had:
+	 *  smp_mb__after_netif_stop_queue();
+	 * but since that doesn't exist yet, just open code it.
+	 */
+	smp_mb();
+
+	/* We need to check again in a case another CPU has just
+	 * made room available.
+	 */
+	if (likely(ngbe_desc_unused(tx_ring) < size))
+		return -EBUSY;
+
+	/* A reprieve! - use start_queue because it doesn't call schedule */
+	netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index);
+	++tx_ring->tx_stats.restart_queue;
+	return 0;
+}
+
+static inline int ngbe_maybe_stop_tx(struct ngbe_ring *tx_ring, u16 size)
+{
+	if (likely(ngbe_desc_unused(tx_ring) >= size))
+		return 0;
+
+	return __ngbe_maybe_stop_tx(tx_ring, size);
+}
+
+#define NGBE_TXD_CMD (NGBE_TXD_EOP | \
+		       NGBE_TXD_RS)
+
+static int ngbe_tx_map(struct ngbe_ring *tx_ring,
+			 struct ngbe_tx_buffer *first,
+			 const u8 hdr_len)
+{
+	struct sk_buff *skb = first->skb;
+	struct ngbe_tx_buffer *tx_buffer;
+	union ngbe_tx_desc *tx_desc;
+	skb_frag_t *frag;
+	dma_addr_t dma;
+	unsigned int data_len, size;
+	u32 tx_flags = first->tx_flags;
+	u32 cmd_type = ngbe_tx_cmd_type(tx_flags);
+	u16 i = tx_ring->next_to_use;
+
+	tx_desc = NGBE_TX_DESC(tx_ring, i);
+
+	ngbe_tx_olinfo_status(tx_desc, tx_flags, skb->len - hdr_len);
+
+	size = skb_headlen(skb);
+	data_len = skb->data_len;
+
+	dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE);
+
+	tx_buffer = first;
+
+	for (frag = &skb_shinfo(skb)->frags[0];; frag++) {
+		if (dma_mapping_error(tx_ring->dev, dma))
+			goto dma_error;
+
+		/* record length, and DMA address */
+		dma_unmap_len_set(tx_buffer, len, size);
+		dma_unmap_addr_set(tx_buffer, dma, dma);
+
+		tx_desc->read.buffer_addr = cpu_to_le64(dma);
+
+		while (unlikely(size > NGBE_MAX_DATA_PER_TXD)) {
+			tx_desc->read.cmd_type_len =
+				cpu_to_le32(cmd_type ^ NGBE_MAX_DATA_PER_TXD);
+
+			i++;
+			tx_desc++;
+			if (i == tx_ring->count) {
+				tx_desc = NGBE_TX_DESC(tx_ring, 0);
+				i = 0;
+			}
+			tx_desc->read.olinfo_status = 0;
+
+			dma += NGBE_MAX_DATA_PER_TXD;
+			size -= NGBE_MAX_DATA_PER_TXD;
+
+			tx_desc->read.buffer_addr = cpu_to_le64(dma);
+		}
+
+		if (likely(!data_len))
+			break;
+
+		tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type ^ size);
+
+		i++;
+		tx_desc++;
+		if (i == tx_ring->count) {
+			tx_desc = NGBE_TX_DESC(tx_ring, 0);
+			i = 0;
+		}
+		tx_desc->read.olinfo_status = 0;
+
+		size = skb_frag_size(frag);
+
+		data_len -= size;
+
+		dma = skb_frag_dma_map(tx_ring->dev, frag, 0, size,
+								DMA_TO_DEVICE);
+
+		tx_buffer = &tx_ring->tx_buffer_info[i];
+	}
+
+	/* write last descriptor with RS and EOP bits */
+	cmd_type |= size | NGBE_TXD_CMD;
+	tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type);
+
+	netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount);
+
+	/* set the timestamp */
+	first->time_stamp = jiffies;
+
+	/*
+	 * Force memory writes to complete before letting h/w know there
+	 * are new descriptors to fetch.  (Only applicable for weak-ordered
+	 * memory model archs, such as IA-64).
+	 *
+	 * We also need this memory barrier to make certain all of the
+	 * status bits have been updated before next_to_watch is written.
+	 */
+	wmb();
+
+	/* set next_to_watch value indicating a packet is present */
+	first->next_to_watch = tx_desc;
+
+	i++;
+	if (i == tx_ring->count)
+		i = 0;
+
+	tx_ring->next_to_use = i;
+
+	ngbe_maybe_stop_tx(tx_ring, DESC_NEEDED);
+
+	skb_tx_timestamp(skb);
+
+	if (netif_xmit_stopped(txring_txq(tx_ring)) || !netdev_xmit_more()) {
+		writel(i, tx_ring->tail);
+		/* The following mmiowb() is required on certain
+		 * architechtures (IA64/Altix in particular) in order to
+		 * synchronize the I/O calls with respect to a spin lock. This
+		 * is because the wmb() on those architectures does not
+		 * guarantee anything for posted I/O writes.
+		 *
+		 * Note that the associated spin_unlock() is not within the
+		 * driver code, but in the networking core stack.
+		 */
+		mmiowb();
+	}
+
+	return 0;
+dma_error:
+	dev_err(tx_ring->dev, "TX DMA map failed\n");
+
+	/* clear dma mappings for failed tx_buffer_info map */
+	for (;;) {
+		tx_buffer = &tx_ring->tx_buffer_info[i];
+		if (dma_unmap_len(tx_buffer, len))
+			dma_unmap_page(tx_ring->dev,
+				       dma_unmap_addr(tx_buffer, dma),
+				       dma_unmap_len(tx_buffer, len),
+				       DMA_TO_DEVICE);
+		dma_unmap_len_set(tx_buffer, len, 0);
+		if (tx_buffer == first)
+			break;
+		if (i == 0)
+			i += tx_ring->count;
+		i--;
+	}
+
+	dev_kfree_skb_any(first->skb);
+	first->skb = NULL;
+
+	tx_ring->next_to_use = i;
+
+	return -1;
+}
+
+/**
+ *	skb_pad			-	zero pad the tail of an skb
+ *	@skb: buffer to pad
+ *	@pad: space to pad
+ *
+ *	Ensure that a buffer is followed by a padding area that is zero
+ *	filled. Used by network drivers which may DMA or transfer data
+ *	beyond the buffer end onto the wire.
+ *
+ *	May return error in out of memory cases. The skb is freed on error.
+ */
+
+int ngbe_skb_pad_nonzero(struct sk_buff *skb, int pad)
+{
+	int err;
+	int ntail;
+
+	/* If the skbuff is non linear tailroom is always zero.. */
+	if (!skb_cloned(skb) && skb_tailroom(skb) >= pad) {
+		memset(skb->data+skb->len, 0x1, pad);
+		return 0;
+	}
+
+	ntail = skb->data_len + pad - (skb->end - skb->tail);
+	if (likely(skb_cloned(skb) || ntail > 0)) {
+		err = pskb_expand_head(skb, 0, ntail, GFP_ATOMIC);
+		if (unlikely(err))
+			goto free_skb;
+	}
+
+	/* FIXME: The use of this function with non-linear skb's really needs
+	 * to be audited.
+	 */
+	err = skb_linearize(skb);
+	if (unlikely(err))
+		goto free_skb;
+
+	memset(skb->data + skb->len, 0x1, pad);
+	return 0;
+
+free_skb:
+	kfree_skb(skb);
+	return err;
+}
+
+netdev_tx_t ngbe_xmit_frame_ring(struct sk_buff *skb,
+				  struct ngbe_adapter *adapter,
+				  struct ngbe_ring *tx_ring)
+{
+	struct ngbe_tx_buffer *first;
+	int tso;
+	u32 tx_flags = 0;
+	unsigned short f;
+	u16 count = TXD_USE_COUNT(skb_headlen(skb));
+	__be16 protocol = skb->protocol;
+	u8 hdr_len = 0;
+	ngbe_dptype dptype;
+
+	/*
+	 * need: 1 descriptor per page * PAGE_SIZE/NGBE_MAX_DATA_PER_TXD,
+	 *       + 1 desc for skb_headlen/NGBE_MAX_DATA_PER_TXD,
+	 *       + 2 desc gap to keep tail from touching head,
+	 *       + 1 desc for context descriptor,
+	 * otherwise try next time
+	 */
+	for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
+		count += TXD_USE_COUNT(skb_frag_size(&skb_shinfo(skb)->
+						     frags[f]));
+
+	if (ngbe_maybe_stop_tx(tx_ring, count + 3)) {
+		tx_ring->tx_stats.tx_busy++;
+		return NETDEV_TX_BUSY;
+	}
+
+	/* record the location of the first descriptor for this packet */
+	first = &tx_ring->tx_buffer_info[tx_ring->next_to_use];
+	first->skb = skb;
+	first->bytecount = skb->len;
+	first->gso_segs = 1;
+
+	/* if we have a HW VLAN tag being added default to the HW one */
+	if (skb_vlan_tag_present(skb)) {
+		tx_flags |= skb_vlan_tag_get(skb) << NGBE_TX_FLAGS_VLAN_SHIFT;
+		tx_flags |= NGBE_TX_FLAGS_HW_VLAN;
+	/* else if it is a SW VLAN check the next protocol and store the tag */
+	} else if (protocol == htons(ETH_P_8021Q)) {
+		struct vlan_hdr *vhdr, _vhdr;
+		vhdr = skb_header_pointer(skb, ETH_HLEN, sizeof(_vhdr), &_vhdr);
+		if (!vhdr)
+			goto out_drop;
+
+		protocol = vhdr->h_vlan_encapsulated_proto;
+		tx_flags |= ntohs(vhdr->h_vlan_TCI) <<
+				  NGBE_TX_FLAGS_VLAN_SHIFT;
+		tx_flags |= NGBE_TX_FLAGS_SW_VLAN;
+	}
+
+	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+	    adapter->ptp_clock) {
+		if (!test_and_set_bit_lock(__NGBE_PTP_TX_IN_PROGRESS,
+				   &adapter->state)) {
+			skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+			tx_flags |= NGBE_TX_FLAGS_TSTAMP;
+
+			/* schedule check for Tx timestamp */
+			adapter->ptp_tx_skb = skb_get(skb);
+			adapter->ptp_tx_start = jiffies;
+			schedule_work(&adapter->ptp_tx_work);
+		} else {
+			adapter->tx_hwtstamp_skipped++;
+		}
+	}
+
+#ifdef CONFIG_PCI_IOV
+	/*
+	 * Use the l2switch_enable flag - would be false if the DMA
+	 * Tx switch had been disabled.
+	 */
+	if (adapter->flags & NGBE_FLAG_SRIOV_L2SWITCH_ENABLE)
+		tx_flags |= NGBE_TX_FLAGS_CC;
+
+#endif
+	/* record initial flags and protocol */
+	first->tx_flags = tx_flags;
+	first->protocol = protocol;
+
+	dptype = encode_tx_desc_ptype(first);
+
+	tso = ngbe_tso(tx_ring, first, &hdr_len, dptype);
+	if (tso < 0)
+		goto out_drop;
+	else if (!tso)
+		ngbe_tx_csum(tx_ring, first, dptype);
+
+	if (ngbe_tx_map(tx_ring, first, hdr_len))
+		goto cleanup_tx_tstamp;
+
+	return NETDEV_TX_OK;
+
+out_drop:
+	dev_kfree_skb_any(first->skb);
+	first->skb = NULL;
+
+cleanup_tx_tstamp:
+	if (unlikely(tx_flags & NGBE_TX_FLAGS_TSTAMP)) {
+		dev_kfree_skb_any(adapter->ptp_tx_skb);
+		adapter->ptp_tx_skb = NULL;
+		cancel_work_sync(&adapter->ptp_tx_work);
+		clear_bit_unlock(__NGBE_PTP_TX_IN_PROGRESS, &adapter->state);
+	}
+
+	return NETDEV_TX_OK;
+}
+
+static netdev_tx_t ngbe_xmit_frame(struct sk_buff *skb,
+				    struct net_device *netdev)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_ring *tx_ring;
+	unsigned int r_idx = skb->queue_mapping;
+
+	if (!netif_carrier_ok(netdev)) {
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+	/*
+	 * The minimum packet size for olinfo paylen is 17 so pad the skb
+	 * in order to meet this minimum size requirement.
+	 */
+	if (skb_put_padto(skb, 17))
+		return NETDEV_TX_OK;
+
+	if (r_idx >= adapter->num_tx_queues)
+		r_idx = r_idx % adapter->num_tx_queues;
+	tx_ring = adapter->tx_ring[r_idx];
+
+	return ngbe_xmit_frame_ring(skb, adapter, tx_ring);
+}
+
+/**
+ * ngbe_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int ngbe_set_mac(struct net_device *netdev, void *p)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	ngbe_del_mac_filter(adapter, hw->mac.addr, VMDQ_P(0));
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+	memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
+
+	ngbe_mac_set_default_filter(adapter, hw->mac.addr);
+	e_info(drv, "The mac has been set to %02X:%02X:%02X:%02X:%02X:%02X\n",
+		 hw->mac.addr[0], hw->mac.addr[1], hw->mac.addr[2],
+		 hw->mac.addr[3], hw->mac.addr[4], hw->mac.addr[5]);
+
+	return 0;
+}
+
+static int ngbe_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
+			   int cmd)
+{
+	struct mii_ioctl_data *mii = (struct mii_ioctl_data *) &ifr->ifr_data;
+	int prtad, devad, ret = 0;
+
+	prtad = (mii->phy_id & MDIO_PHY_ID_PRTAD) >> 5;
+	devad = (mii->phy_id & MDIO_PHY_ID_DEVAD);
+
+	return ret;
+}
+
+static int ngbe_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+
+	switch (cmd) {
+	case SIOCGHWTSTAMP:
+		return ngbe_ptp_get_ts_config(adapter, ifr);
+	case SIOCSHWTSTAMP:
+		return ngbe_ptp_set_ts_config(adapter, ifr);
+	case SIOCGMIIREG:
+	case SIOCSMIIREG:
+		return ngbe_mii_ioctl(netdev, ifr, cmd);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+/**
+ * ngbe_setup_tc - routine to configure net_device for multiple traffic
+ * classes.
+ *
+ * @netdev: net device to configure
+ * @tc: number of traffic classes to enable
+ */
+int ngbe_setup_tc(struct net_device *dev, u8 tc)
+{
+	struct ngbe_adapter *adapter = netdev_priv(dev);
+
+	/* Hardware has to reinitialize queues and interrupts to
+	 * match packet buffer alignment. Unfortunately, the
+	 * hardware is not flexible enough to do this dynamically.
+	 */
+	if (netif_running(dev))
+		ngbe_close(dev);
+	else
+		ngbe_reset(adapter);
+
+	ngbe_clear_interrupt_scheme(adapter);
+
+	if (tc) {
+		netdev_set_num_tc(dev, tc);
+	} else {
+		netdev_reset_tc(dev);
+	}
+
+	ngbe_init_interrupt_scheme(adapter);
+	if (netif_running(dev))
+		ngbe_open(dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PCI_IOV
+void ngbe_sriov_reinit(struct ngbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+
+	rtnl_lock();
+	ngbe_setup_tc(netdev, netdev_get_num_tc(netdev));
+	rtnl_unlock();
+}
+#endif
+
+void ngbe_do_reset(struct net_device *netdev)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+
+	if (netif_running(netdev))
+		ngbe_reinit_locked(adapter);
+	else
+		ngbe_reset(adapter);
+}
+
+static netdev_features_t ngbe_fix_features(struct net_device *netdev,
+										netdev_features_t features)
+{
+	/* If Rx checksum is disabled, then RSC/LRO should also be disabled */
+	if (!(features & NETIF_F_RXCSUM))
+		features &= ~NETIF_F_LRO;
+
+	/* Turn off LRO if not RSC capable */
+	features &= ~NETIF_F_LRO;
+
+	return features;
+}
+
+static int ngbe_set_features(struct net_device *netdev,
+							netdev_features_t features)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	bool need_reset = false;
+
+	if (features & NETIF_F_HW_VLAN_CTAG_RX)
+		ngbe_vlan_strip_enable(adapter);
+	else
+		ngbe_vlan_strip_disable(adapter);
+
+	if (features & NETIF_F_RXHASH) {
+		if (!(adapter->flags2 & NGBE_FLAG2_RSS_ENABLED)) {
+			wr32m(&adapter->hw, NGBE_RDB_RA_CTL,
+				NGBE_RDB_RA_CTL_RSS_EN, NGBE_RDB_RA_CTL_RSS_EN);
+			adapter->flags2 |= NGBE_FLAG2_RSS_ENABLED;
+		}
+	} else {
+		if (adapter->flags2 & NGBE_FLAG2_RSS_ENABLED) {
+			wr32m(&adapter->hw, NGBE_RDB_RA_CTL,
+				NGBE_RDB_RA_CTL_RSS_EN, ~NGBE_RDB_RA_CTL_RSS_EN);
+			adapter->flags2 &= ~NGBE_FLAG2_RSS_ENABLED;
+		}
+	}
+
+	if (need_reset)
+		ngbe_do_reset(netdev);
+
+	return 0;
+}
+
+static int ngbe_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
+					struct net_device *dev,
+					const unsigned char *addr,
+					u16 vid,
+					u16 flags)
+{
+	/* guarantee we can provide a unique filter for the unicast address */
+	if (is_unicast_ether_addr(addr) || is_link_local_ether_addr(addr)) {
+		if (NGBE_MAX_PF_MACVLANS <= netdev_uc_count(dev))
+			return -ENOMEM;
+	}
+
+	return ndo_dflt_fdb_add(ndm, tb, dev, addr, vid, flags);
+}
+
+static int ngbe_ndo_bridge_setlink(struct net_device *dev,
+				    struct nlmsghdr *nlh,
+				    __always_unused u16 flags)
+{
+	struct ngbe_adapter *adapter = netdev_priv(dev);
+	struct nlattr *attr, *br_spec;
+	int rem;
+
+	if (!(adapter->flags & NGBE_FLAG_SRIOV_ENABLED))
+		return -EOPNOTSUPP;
+
+	br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC);
+
+	nla_for_each_nested(attr, br_spec, rem) {
+		__u16 mode;
+
+		if (nla_type(attr) != IFLA_BRIDGE_MODE)
+			continue;
+
+		mode = nla_get_u16(attr);
+		if (mode == BRIDGE_MODE_VEPA) {
+			adapter->flags |= NGBE_FLAG_SRIOV_VEPA_BRIDGE_MODE;
+		} else if (mode == BRIDGE_MODE_VEB) {
+			adapter->flags &= ~NGBE_FLAG_SRIOV_VEPA_BRIDGE_MODE;
+		} else {
+			return -EINVAL;
+		}
+
+		adapter->bridge_mode = mode;
+
+		/* re-configure settings related to bridge mode */
+		ngbe_configure_bridge_mode(adapter);
+
+		e_info(drv, "enabling bridge mode: %s\n",
+			mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB");
+	}
+
+	return 0;
+}
+
+static int ngbe_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
+				    struct net_device *dev,
+				    u32 __maybe_unused filter_mask,
+				    int nlflags)
+{
+	struct ngbe_adapter *adapter = netdev_priv(dev);
+	u16 mode;
+
+	if (!(adapter->flags & NGBE_FLAG_SRIOV_ENABLED))
+		return 0;
+
+	mode = adapter->bridge_mode;
+	return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode, 0, 0, nlflags,
+				       filter_mask, NULL);
+}
+
+#define NGBE_MAX_TUNNEL_HDR_LEN 80
+static netdev_features_t ngbe_features_check(struct sk_buff *skb,
+											struct net_device *dev,
+											netdev_features_t features)
+{
+	u32 vlan_num = 0;
+	u16 vlan_depth = skb->mac_len;
+	__be16 type = skb->protocol;
+	struct vlan_hdr *vh;
+
+	if (skb_vlan_tag_present(skb)) {
+		vlan_num++;
+	}
+
+	if (vlan_depth) {
+		vlan_depth -= VLAN_HLEN;
+	} else {
+		vlan_depth = ETH_HLEN;
+	}
+
+	while (type == htons(ETH_P_8021Q) || type == htons(ETH_P_8021AD)) {
+		vlan_num++;
+		vh = (struct vlan_hdr *)(skb->data + vlan_depth);
+		type = vh->h_vlan_encapsulated_proto;
+		vlan_depth += VLAN_HLEN;
+
+	}
+
+	if (vlan_num > 2)
+		features &= ~(NETIF_F_HW_VLAN_CTAG_TX |
+			    NETIF_F_HW_VLAN_STAG_TX);
+
+	if (skb->encapsulation) {
+		if (unlikely(skb_inner_mac_header(skb) -
+					skb_transport_header(skb) >
+					NGBE_MAX_TUNNEL_HDR_LEN))
+			return features & ~NETIF_F_CSUM_MASK;
+	}
+	return features;
+}
+
+static const struct net_device_ops ngbe_netdev_ops = {
+	.ndo_open               = ngbe_open,
+	.ndo_stop               = ngbe_close,
+	.ndo_start_xmit         = ngbe_xmit_frame,
+	.ndo_set_rx_mode        = ngbe_set_rx_mode,
+	.ndo_validate_addr      = eth_validate_addr,
+	.ndo_set_mac_address    = ngbe_set_mac,
+	.ndo_change_mtu         = ngbe_change_mtu,
+	.ndo_tx_timeout         = ngbe_tx_timeout,
+	.ndo_vlan_rx_add_vid    = ngbe_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid   = ngbe_vlan_rx_kill_vid,
+	.ndo_do_ioctl           = ngbe_ioctl,
+
+	.ndo_set_vf_mac         = ngbe_ndo_set_vf_mac,
+	.ndo_set_vf_vlan        = ngbe_ndo_set_vf_vlan,
+	/* set_vf_rate not support by emerald */
+	.ndo_set_vf_rate        = ngbe_ndo_set_vf_bw,
+	.ndo_set_vf_spoofchk    = ngbe_ndo_set_vf_spoofchk,
+	.ndo_set_vf_trust	= ngbe_ndo_set_vf_trust,
+	.ndo_get_vf_config      = ngbe_ndo_get_vf_config,
+	.ndo_get_stats64        = ngbe_get_stats64,
+
+	.ndo_fdb_add            = ngbe_ndo_fdb_add,
+
+	.ndo_bridge_setlink     = ngbe_ndo_bridge_setlink,
+	.ndo_bridge_getlink     = ngbe_ndo_bridge_getlink,
+
+	.ndo_features_check     = ngbe_features_check,
+	.ndo_set_features       = ngbe_set_features,
+	.ndo_fix_features       = ngbe_fix_features,
+};
+
+void ngbe_assign_netdev_ops(struct net_device *dev)
+{
+	dev->netdev_ops = &ngbe_netdev_ops;
+	ngbe_set_ethtool_ops(dev);
+	dev->watchdog_timeo = 5 * HZ;
+}
+
+/**
+ * ngbe_wol_supported - Check whether device supports WoL
+ * @adapter: the adapter private structure
+ * @device_id: the device ID
+ * @subdev_id: the subsystem device ID
+ *
+ * This function is used by probe and ethtool to determine
+ * which devices have WoL support
+ *
+ **/
+int ngbe_wol_supported(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+
+	/* check eeprom to see if WOL is enabled */
+	if ((hw->bus.func == 0) ||
+		(hw->bus.func == 1) ||
+		(hw->bus.func == 2) ||
+		(hw->bus.func == 3))
+		return true;
+	else
+		return false;
+}
+
+
+/**
+ * ngbe_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in ngbe_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * ngbe_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int ngbe_probe(struct pci_dev *pdev,
+				const struct pci_device_id __always_unused *ent)
+{
+	struct net_device *netdev;
+	struct ngbe_adapter *adapter = NULL;
+	struct ngbe_hw *hw = NULL;
+	static int cards_found;
+	int err, pci_using_dac, expected_gts;
+	u32 eeprom_verl = 0;
+	u32 etrack_id = 0;
+	char *info_string, *i_s_var;
+	u32 eeprom_cksum_devcap = 0;
+	u32 saved_version = 0;
+	u32 devcap;
+
+	bool disable_dev = false;
+
+	netdev_features_t hw_features;
+
+	err = pci_enable_device_mem(pdev);
+	if (err)
+		return err;
+
+	if (!dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)) &&
+		!dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64))) {
+		pci_using_dac = 1;
+	} else {
+		err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32));
+		if (err) {
+			err = dma_set_coherent_mask(pci_dev_to_dev(pdev),
+							DMA_BIT_MASK(32));
+			if (err) {
+				dev_err(pci_dev_to_dev(pdev), "No usable DMA "
+					"configuration, aborting\n");
+				goto err_dma;
+			}
+		}
+		pci_using_dac = 0;
+	}
+
+	err = pci_request_selected_regions(pdev,
+						pci_select_bars(pdev, IORESOURCE_MEM),
+						ngbe_driver_name);
+	if (err) {
+		dev_err(pci_dev_to_dev(pdev),
+			"pci_request_selected_regions failed 0x%x\n", err);
+		goto err_pci_reg;
+	}
+
+	pci_enable_pcie_error_reporting(pdev);
+	pci_set_master(pdev);
+
+	/* errata 16 */
+	pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL,
+		PCI_EXP_DEVCTL_READRQ,
+		0x1000);
+
+	netdev = alloc_etherdev_mq(sizeof(struct ngbe_adapter), NGBE_MAX_TX_QUEUES);
+	if (!netdev) {
+		err = -ENOMEM;
+		goto err_alloc_etherdev;
+	}
+
+	SET_NETDEV_DEV(netdev, pci_dev_to_dev(pdev));
+
+	adapter = netdev_priv(netdev);
+	adapter->netdev = netdev;
+	adapter->pdev = pdev;
+	hw = &adapter->hw;
+	hw->back = adapter;
+	adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1;
+
+	hw->hw_addr = ioremap(pci_resource_start(pdev, 0),
+						pci_resource_len(pdev, 0));
+
+	adapter->io_addr = hw->hw_addr;
+	if (!hw->hw_addr) {
+		err = -EIO;
+		goto err_ioremap;
+	}
+
+	/* autoneg default on */
+	hw->mac.autoneg = true;
+
+	/* assign netdev ops and ethtool ops */
+	ngbe_assign_netdev_ops(netdev);
+
+	strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+	adapter->bd_number = cards_found;
+
+	/* setup the private structure */
+	err = ngbe_sw_init(adapter);
+	if (err)
+		goto err_sw_init;
+
+	/*
+	 * check_options must be called before setup_link to set up
+	 * hw->fc completely
+	 */
+	ngbe_check_options(adapter);
+
+	TCALL(hw, mac.ops.set_lan_id);
+
+	/* check if flash load is done after hw power up */
+	err = ngbe_check_flash_load(hw, NGBE_SPI_ILDR_STATUS_PERST);
+	if (err)
+		goto err_sw_init;
+	err = ngbe_check_flash_load(hw, NGBE_SPI_ILDR_STATUS_PWRRST);
+	if (err)
+		goto err_sw_init;
+
+	/* reset_hw fills in the perm_addr as well */
+
+	hw->phy.reset_if_overtemp = true;
+	err = TCALL(hw, mac.ops.reset_hw);
+	hw->phy.reset_if_overtemp = false;
+	if (err) {
+		e_dev_err("HW reset failed: %d\n", err);
+		goto err_sw_init;
+	}
+
+#ifdef CONFIG_PCI_IOV
+	if (adapter->num_vfs > 0) {
+		e_dev_warn("Enabling SR-IOV VFs using the max_vfs module "
+			   "parameter is deprecated.\n");
+		e_dev_warn("Please use the pci sysfs interface instead. Ex:\n");
+		e_dev_warn("echo '%d' > /sys/bus/pci/devices/%04x:%02x:%02x.%1x"
+				"/sriov_numvfs\n",
+				adapter->num_vfs,
+				pci_domain_nr(pdev->bus),
+				pdev->bus->number,
+				PCI_SLOT(pdev->devfn),
+				PCI_FUNC(pdev->devfn));
+	}
+
+	if (adapter->flags & NGBE_FLAG_SRIOV_CAPABLE) {
+		pci_sriov_set_totalvfs(pdev, NGBE_MAX_VFS_DRV_LIMIT);
+		ngbe_enable_sriov(adapter);
+	}
+#endif /* CONFIG_PCI_IOV */
+
+	netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+
+#ifdef NETIF_F_IPV6_CSUM
+	netdev->features |= NETIF_F_IPV6_CSUM;
+#endif
+
+	netdev->features |= NETIF_F_HW_VLAN_CTAG_TX |
+						NETIF_F_HW_VLAN_CTAG_RX;
+
+	netdev->features |= ngbe_tso_features();
+
+	if (adapter->flags2 & NGBE_FLAG2_RSS_ENABLED)
+		netdev->features |= NETIF_F_RXHASH;
+
+	netdev->features |= NETIF_F_RXCSUM;
+
+	/* copy netdev features into list of user selectable features */
+	hw_features = netdev->hw_features;
+	hw_features |= netdev->features;
+
+	/* set this bit last since it cannot be part of hw_features */
+	netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
+	netdev->features |= NETIF_F_NTUPLE;
+
+	hw_features |= NETIF_F_NTUPLE;
+	netdev->hw_features = hw_features;
+
+	netdev->vlan_features |= NETIF_F_SG |
+							 NETIF_F_IP_CSUM |
+							 NETIF_F_IPV6_CSUM |
+							 NETIF_F_TSO |
+							 NETIF_F_TSO6;
+
+	netdev->hw_enc_features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+
+	netdev->priv_flags |= IFF_UNICAST_FLT;
+	netdev->priv_flags |= IFF_SUPP_NOFCS;
+
+	/* MTU range: 68 - 9414 */
+	netdev->min_mtu = ETH_MIN_MTU;
+	netdev->max_mtu = NGBE_MAX_JUMBO_FRAME_SIZE - (ETH_HLEN + ETH_FCS_LEN);
+
+	if (pci_using_dac) {
+		netdev->features |= NETIF_F_HIGHDMA;
+
+		netdev->vlan_features |= NETIF_F_HIGHDMA;
+
+	}
+
+	if (hw->bus.lan_id == 0) {
+		wr32(hw, NGBE_CALSUM_CAP_STATUS, 0x0);
+		wr32(hw, NGBE_EEPROM_VERSION_STORE_REG, 0x0);
+	} else {
+		eeprom_cksum_devcap = rd32(hw, NGBE_CALSUM_CAP_STATUS);
+		saved_version = rd32(hw, NGBE_EEPROM_VERSION_STORE_REG);
+	}
+
+	TCALL(hw, eeprom.ops.init_params);
+	TCALL(hw, mac.ops.release_swfw_sync, NGBE_MNG_SWFW_SYNC_SW_MB);
+	if (hw->bus.lan_id == 0 || eeprom_cksum_devcap == 0) {
+	/* make sure the EEPROM is good */
+		if (TCALL(hw, eeprom.ops.eeprom_chksum_cap_st, NGBE_CALSUM_COMMAND, &devcap)) {
+			e_dev_err("The EEPROM Checksum Is Not Valid\n");
+			err = -EIO;
+			goto err_sw_init;
+		}
+	}
+
+	memcpy(netdev->dev_addr, hw->mac.perm_addr, netdev->addr_len);
+
+	if (!is_valid_ether_addr(netdev->dev_addr)) {
+		e_dev_err("invalid MAC address\n");
+		err = -EIO;
+		goto err_sw_init;
+	}
+
+	ngbe_mac_set_default_filter(adapter, hw->mac.perm_addr);
+
+	timer_setup(&adapter->service_timer, ngbe_service_timer, 0);
+#ifdef CONFIG_NGBE_POLL_LINK_STATUS
+	timer_setup(&adapter->link_check_timer, ngbe_link_check_timer, 0);
+#endif
+	if (NGBE_REMOVED(hw->hw_addr)) {
+		err = -EIO;
+		goto err_sw_init;
+	}
+	INIT_WORK(&adapter->service_task, ngbe_service_task);
+	set_bit(__NGBE_SERVICE_INITED, &adapter->state);
+	clear_bit(__NGBE_SERVICE_SCHED, &adapter->state);
+
+	err = ngbe_init_interrupt_scheme(adapter);
+	if (err)
+		goto err_sw_init;
+
+	/* WOL not supported for all devices */
+	adapter->wol = 0;
+	if (hw->bus.lan_id == 0 || eeprom_cksum_devcap == 0) {
+		TCALL(hw, eeprom.ops.read,
+				hw->eeprom.sw_region_offset + NGBE_DEVICE_CAPS,
+				&adapter->eeprom_cap);
+		/*only support in LAN0*/
+		adapter->eeprom_cap = NGBE_DEVICE_CAPS_WOL_PORT0;
+	} else {
+		adapter->eeprom_cap = eeprom_cksum_devcap & 0xffff;
+	}
+	if (ngbe_wol_supported(adapter))
+		adapter->wol = NGBE_PSR_WKUP_CTL_MAG;
+	if ((hw->subsystem_device_id & WOL_SUP_MASK) == WOL_SUP) {
+		/*enable wol  first in shadow ram*/
+		ngbe_write_ee_hostif(hw, 0x7FE, 0xa50F);
+		ngbe_write_ee_hostif(hw, 0x7FF, 0x5a5a);
+	}
+	hw->wol_enabled = !!(adapter->wol);
+	wr32(hw, NGBE_PSR_WKUP_CTL, adapter->wol);
+
+	device_set_wakeup_enable(pci_dev_to_dev(adapter->pdev), adapter->wol);
+
+	/*
+	 * Save off EEPROM version number and Option Rom version which
+	 * together make a unique identify for the eeprom
+	 */
+	if (hw->bus.lan_id == 0 || saved_version == 0) {
+		TCALL(hw, eeprom.ops.read32,
+				hw->eeprom.sw_region_offset + NGBE_EEPROM_VERSION_L,
+				&eeprom_verl);
+		etrack_id = eeprom_verl;
+		wr32(hw, NGBE_EEPROM_VERSION_STORE_REG, etrack_id);
+		wr32(hw, NGBE_CALSUM_CAP_STATUS, 0x10000 | (u32)adapter->eeprom_cap);
+	} else if (eeprom_cksum_devcap) {
+		etrack_id = saved_version;
+	} else {
+		TCALL(hw, eeprom.ops.read32,
+			hw->eeprom.sw_region_offset + NGBE_EEPROM_VERSION_L,
+			&eeprom_verl);
+		etrack_id = eeprom_verl;
+	}
+
+	/* Make sure offset to SCSI block is valid */
+	snprintf(adapter->eeprom_id, sizeof(adapter->eeprom_id),
+			 "0x%08x", etrack_id);
+
+	/* reset the hardware with the new settings */
+	err = TCALL(hw, mac.ops.start_hw);
+	if (err == NGBE_ERR_EEPROM_VERSION) {
+		/* We are running on a pre-production device, log a warning */
+		e_dev_warn("This device is a pre-production adapter/LOM. "
+					"Please be aware there may be issues associated "
+					"with your hardware.  If you are experiencing "
+					"problems please contact your hardware "
+					"representative who provided you with this "
+					"hardware.\n");
+	} else if (err) {
+		e_dev_err("HW init failed, err = %d\n", err);
+		goto err_register;
+	}
+
+	/* pick up the PCI bus settings for reporting later */
+	TCALL(hw, mac.ops.get_bus_info);
+
+	strcpy(netdev->name, "eth%d");
+	err = register_netdev(netdev);
+	if (err)
+		goto err_register;
+
+	pci_set_drvdata(pdev, adapter);
+	adapter->netdev_registered = true;
+
+	/*
+	 * call save state here in standalone driver because it relies on
+	 * adapter struct to exist, and needs to call netdev_priv
+	 */
+	pci_save_state(pdev);
+
+	/* carrier off reporting is important to ethtool even BEFORE open */
+	netif_carrier_off(netdev);
+	/* keep stopping all the transmit queues for older kernels */
+	netif_tx_stop_all_queues(netdev);
+
+	/* print all messages at the end so that we use our eth%d name */
+
+	/* calculate the expected PCIe bandwidth required for optimal
+	 * performance. Note that some older parts will never have enough
+	 * bandwidth due to being older generation PCIe parts. We clamp these
+	 * parts to ensure that no warning is displayed, as this could confuse
+	 * users otherwise. */
+
+	expected_gts = ngbe_enumerate_functions(adapter) * 10;
+
+	/* don't check link if we failed to enumerate functions */
+	if (expected_gts > 0)
+		ngbe_check_minimum_link(adapter, expected_gts);
+
+	TCALL(hw, mac.ops.set_fw_drv_ver, 0xFF, 0xFF, 0xFF, 0xFF);
+
+	if (((hw->subsystem_device_id & NCSI_SUP_MASK) == NCSI_SUP) ||
+		((hw->subsystem_device_id & OEM_MASK) == OCP_CARD))
+		e_info(probe, "NCSI : support");
+	else
+		e_info(probe, "NCSI : unsupported");
+
+	e_info(probe, "PHY: %s, PBA No: Wang Xun GbE Family Controller\n",
+			hw->phy.type == ngbe_phy_internal?"Internal":"External");
+
+	e_info(probe, "%02x:%02x:%02x:%02x:%02x:%02x\n",
+		   netdev->dev_addr[0], netdev->dev_addr[1],
+		   netdev->dev_addr[2], netdev->dev_addr[3],
+		   netdev->dev_addr[4], netdev->dev_addr[5]);
+
+#define INFO_STRING_LEN 255
+	info_string = kzalloc(INFO_STRING_LEN, GFP_KERNEL);
+	if (!info_string) {
+		e_err(probe, "allocation for info string failed\n");
+		goto no_info_string;
+	}
+	i_s_var = info_string;
+	i_s_var += sprintf(info_string, "Enabled Features: ");
+	i_s_var += sprintf(i_s_var, "RxQ: %d TxQ: %d ",
+			   adapter->num_rx_queues, adapter->num_tx_queues);
+	if (adapter->flags & NGBE_FLAG_TPH_ENABLED)
+		i_s_var += sprintf(i_s_var, "TPH ");
+
+	BUG_ON(i_s_var > (info_string + INFO_STRING_LEN));
+	/* end features printing */
+	e_info(probe, "%s\n", info_string);
+	kfree(info_string);
+no_info_string:
+
+#ifdef CONFIG_PCI_IOV
+	if (adapter->flags & NGBE_FLAG_SRIOV_ENABLED) {
+		int i;
+		for (i = 0; i < adapter->num_vfs; i++)
+			ngbe_vf_configuration(pdev, (i | 0x10000000));
+	}
+#endif
+
+	e_info(probe, "WangXun(R) Gigabit Network Connection\n");
+	cards_found++;
+
+#ifdef CONFIG_NGBE_SYSFS
+	if (ngbe_sysfs_init(adapter))
+		e_err(probe, "failed to allocate sysfs resources\n");
+#else
+#ifdef CONFIG_NGBE_PROCFS
+	if (ngbe_procfs_init(adapter))
+		e_err(probe, "failed to allocate procfs resources\n");
+#endif /* CONFIG_NGBE_PROCFS */
+#endif /* CONFIG_NGBE_SYSFS */
+
+
+#ifdef CONFIG_NGBE_DEBUG_FS
+	ngbe_dbg_adapter_init(adapter);
+#endif /* CONFIG_NGBE_DEBUG_FS */
+
+	return 0;
+
+err_register:
+	ngbe_clear_interrupt_scheme(adapter);
+	ngbe_release_hw_control(adapter);
+err_sw_init:
+#ifdef CONFIG_PCI_IOV
+	ngbe_disable_sriov(adapter);
+#endif /* CONFIG_PCI_IOV */
+	adapter->flags2 &= ~NGBE_FLAG2_SEARCH_FOR_SFP;
+	kfree(adapter->mac_table);
+	iounmap(adapter->io_addr);
+err_ioremap:
+	disable_dev = !test_and_set_bit(__NGBE_DISABLED, &adapter->state);
+	free_netdev(netdev);
+err_alloc_etherdev:
+	pci_release_selected_regions(pdev,
+							pci_select_bars(pdev, IORESOURCE_MEM));
+err_pci_reg:
+err_dma:
+	if (!adapter || disable_dev)
+		pci_disable_device(pdev);
+
+	return err;
+}
+
+/**
+ * ngbe_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * ngbe_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device.  The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+static void ngbe_remove(struct pci_dev *pdev)
+{
+	struct ngbe_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev;
+	bool disable_dev;
+
+	/* if !adapter then we already cleaned up in probe */
+	if (!adapter)
+		return;
+
+	netdev = adapter->netdev;
+#ifdef CONFIG_NGBE_DEBUG_FS
+	ngbe_dbg_adapter_exit(adapter);
+#endif
+
+	set_bit(__NGBE_REMOVING, &adapter->state);
+	cancel_work_sync(&adapter->service_task);
+
+#ifdef CONFIG_NGBE_SYSFS
+	ngbe_sysfs_exit(adapter);
+#else
+#ifdef CONFIG_NGBE_PROCFS
+	ngbe_procfs_exit(adapter);
+#endif
+#endif /* CONFIG_NGBE_SYSFS */
+	if (adapter->netdev_registered) {
+		unregister_netdev(netdev);
+		adapter->netdev_registered = false;
+	}
+
+#ifdef CONFIG_PCI_IOV
+	ngbe_disable_sriov(adapter);
+#endif
+
+	ngbe_clear_interrupt_scheme(adapter);
+	ngbe_release_hw_control(adapter);
+
+	iounmap(adapter->io_addr);
+	pci_release_selected_regions(pdev,
+								pci_select_bars(pdev, IORESOURCE_MEM));
+
+	kfree(adapter->mac_table);
+	disable_dev = !test_and_set_bit(__NGBE_DISABLED, &adapter->state);
+	free_netdev(netdev);
+
+	pci_disable_pcie_error_reporting(pdev);
+
+	if (disable_dev)
+		pci_disable_device(pdev);
+}
+
+static bool ngbe_check_cfg_remove(struct ngbe_hw *hw, struct pci_dev *pdev)
+{
+	u16 value;
+
+	pci_read_config_word(pdev, PCI_VENDOR_ID, &value);
+	if (value == NGBE_FAILED_READ_CFG_WORD) {
+		ngbe_remove_adapter(hw);
+		return true;
+	}
+	return false;
+}
+
+u16 ngbe_read_pci_cfg_word(struct ngbe_hw *hw, u32 reg)
+{
+	struct ngbe_adapter *adapter = hw->back;
+	u16 value;
+
+	if (NGBE_REMOVED(hw->hw_addr))
+		return NGBE_FAILED_READ_CFG_WORD;
+	pci_read_config_word(adapter->pdev, reg, &value);
+	if (value == NGBE_FAILED_READ_CFG_WORD &&
+		ngbe_check_cfg_remove(hw, adapter->pdev))
+		return NGBE_FAILED_READ_CFG_WORD;
+	return value;
+}
+
+#ifdef CONFIG_PCI_IOV
+static u32 ngbe_read_pci_cfg_dword(struct ngbe_hw *hw, u32 reg)
+{
+	struct ngbe_adapter *adapter = hw->back;
+	u32 value;
+
+	if (NGBE_REMOVED(hw->hw_addr))
+		return NGBE_FAILED_READ_CFG_DWORD;
+	pci_read_config_dword(adapter->pdev, reg, &value);
+	if (value == NGBE_FAILED_READ_CFG_DWORD &&
+		ngbe_check_cfg_remove(hw, adapter->pdev))
+		return NGBE_FAILED_READ_CFG_DWORD;
+	return value;
+}
+#endif /* CONFIG_PCI_IOV */
+
+void ngbe_write_pci_cfg_word(struct ngbe_hw *hw, u32 reg, u16 value)
+{
+	struct ngbe_adapter *adapter = hw->back;
+
+	if (NGBE_REMOVED(hw->hw_addr))
+		return;
+	pci_write_config_word(adapter->pdev, reg, value);
+}
+
+/**
+ * ngbe_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t ngbe_io_error_detected(struct pci_dev *pdev,
+						pci_channel_state_t state)
+{
+	struct ngbe_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev = adapter->netdev;
+
+#ifdef CONFIG_PCI_IOV
+		struct ngbe_hw *hw = &adapter->hw;
+		struct pci_dev *bdev, *vfdev;
+		u32 dw0, dw1, dw2, dw3;
+		int vf, pos;
+		u16 req_id, pf_func;
+
+		if (adapter->num_vfs == 0)
+			goto skip_bad_vf_detection;
+
+		bdev = pdev->bus->self;
+		while (bdev && (pci_pcie_type(bdev) != PCI_EXP_TYPE_ROOT_PORT))
+			bdev = bdev->bus->self;
+
+		if (!bdev)
+			goto skip_bad_vf_detection;
+
+		pos = pci_find_ext_capability(bdev, PCI_EXT_CAP_ID_ERR);
+		if (!pos)
+			goto skip_bad_vf_detection;
+
+		dw0 = ngbe_read_pci_cfg_dword(hw, pos + PCI_ERR_HEADER_LOG);
+		dw1 = ngbe_read_pci_cfg_dword(hw,
+							pos + PCI_ERR_HEADER_LOG + 4);
+		dw2 = ngbe_read_pci_cfg_dword(hw,
+							pos + PCI_ERR_HEADER_LOG + 8);
+		dw3 = ngbe_read_pci_cfg_dword(hw,
+							pos + PCI_ERR_HEADER_LOG + 12);
+		if (NGBE_REMOVED(hw->hw_addr))
+			goto skip_bad_vf_detection;
+
+		req_id = dw1 >> 16;
+		/* if bit 7 of the requestor ID is set then it's a VF */
+		if (!(req_id & 0x0080))
+			goto skip_bad_vf_detection;
+
+		pf_func = req_id & 0x01;
+		if ((pf_func & 1) == (pdev->devfn & 1)) {
+			vf = (req_id & 0x7F) >> 1;
+			e_dev_err("VF %d has caused a PCIe error\n", vf);
+			e_dev_err("TLP: dw0: %8.8x\tdw1: %8.8x\tdw2: "
+					"%8.8x\tdw3: %8.8x\n",
+			dw0, dw1, dw2, dw3);
+
+			/* Find the pci device of the offending VF */
+			vfdev = pci_get_device(PCI_VENDOR_ID_TRUSTNETIC,
+						NGBE_VF_DEVICE_ID, NULL);
+			while (vfdev) {
+				if (vfdev->devfn == (req_id & 0xFF))
+					break;
+				vfdev = pci_get_device(PCI_VENDOR_ID_TRUSTNETIC,
+						NGBE_VF_DEVICE_ID, vfdev);
+			}
+			/*
+			 * There's a slim chance the VF could have been hot
+			 * plugged, so if it is no longer present we don't need
+			 * to issue the VFLR.Just clean up the AER in that case.
+			 */
+			if (vfdev) {
+				ngbe_issue_vf_flr(adapter, vfdev);
+				/* Free device reference count */
+				pci_dev_put(vfdev);
+			}
+
+			pci_cleanup_aer_uncorrect_error_status(pdev);
+		}
+
+		/*
+		 * Even though the error may have occurred on the other port
+		 * we still need to increment the vf error reference count for
+		 * both ports because the I/O resume function will be called
+		 * for both of them.
+		 */
+		adapter->vferr_refcount++;
+
+		return PCI_ERS_RESULT_RECOVERED;
+
+	skip_bad_vf_detection:
+#endif /* CONFIG_PCI_IOV */
+
+	if (!test_bit(__NGBE_SERVICE_INITED, &adapter->state))
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	rtnl_lock();
+	netif_device_detach(netdev);
+
+	if (state == pci_channel_io_perm_failure) {
+		rtnl_unlock();
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	if (netif_running(netdev))
+		ngbe_close(netdev);
+
+	if (!test_and_set_bit(__NGBE_DISABLED, &adapter->state))
+		pci_disable_device(pdev);
+	rtnl_unlock();
+
+	/* Request a slot reset. */
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * ngbe_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot.
+ */
+static pci_ers_result_t ngbe_io_slot_reset(struct pci_dev *pdev)
+{
+	struct ngbe_adapter *adapter = pci_get_drvdata(pdev);
+	pci_ers_result_t result = PCI_ERS_RESULT_RECOVERED;
+
+	if (pci_enable_device_mem(pdev)) {
+		e_err(probe, "Cannot re-enable PCI device after reset.\n");
+		result = PCI_ERS_RESULT_DISCONNECT;
+	} else {
+		smp_mb__before_atomic();
+		clear_bit(__NGBE_DISABLED, &adapter->state);
+		adapter->hw.hw_addr = adapter->io_addr;
+		pci_set_master(pdev);
+		pci_restore_state(pdev);
+		/*
+		 * After second error pci->state_saved is false, this
+		 * resets it so EEH doesn't break.
+		 */
+		pci_save_state(pdev);
+
+		pci_wake_from_d3(pdev, false);
+
+		ngbe_reset(adapter);
+
+		result = PCI_ERS_RESULT_RECOVERED;
+	}
+
+	pci_cleanup_aer_uncorrect_error_status(pdev);
+
+	return result;
+}
+
+/**
+ * ngbe_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation.
+ */
+static void ngbe_io_resume(struct pci_dev *pdev)
+{
+	struct ngbe_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev = adapter->netdev;
+
+#ifdef CONFIG_PCI_IOV
+	if (adapter->vferr_refcount) {
+		e_info(drv, "Resuming after VF err\n");
+		adapter->vferr_refcount--;
+		return;
+	}
+#endif
+	rtnl_lock();
+	if (netif_running(netdev))
+		ngbe_open(netdev);
+
+	netif_device_attach(netdev);
+	rtnl_unlock();
+}
+
+static const struct pci_error_handlers ngbe_err_handler = {
+	.error_detected = ngbe_io_error_detected,
+	.slot_reset = ngbe_io_slot_reset,
+	.resume = ngbe_io_resume,
+};
+
+struct net_device *ngbe_hw_to_netdev(const struct ngbe_hw *hw)
+{
+	return ((struct ngbe_adapter *)hw->back)->netdev;
+}
+struct ngbe_msg *ngbe_hw_to_msg(const struct ngbe_hw *hw)
+{
+	struct ngbe_adapter *adapter =
+		container_of(hw, struct ngbe_adapter, hw);
+	return (struct ngbe_msg *)&adapter->msg_enable;
+}
+
+static struct pci_driver ngbe_driver = {
+	.name     = ngbe_driver_name,
+	.id_table = ngbe_pci_tbl,
+	.probe    = ngbe_probe,
+	.remove   = ngbe_remove,
+#ifdef CONFIG_PM
+	.suspend  = ngbe_suspend,
+	.resume   = ngbe_resume,
+#endif
+	.shutdown = ngbe_shutdown,
+	.sriov_configure = ngbe_pci_sriov_configure,
+	.err_handler = &ngbe_err_handler
+};
+
+/**
+ * ngbe_init_module - Driver Registration Routine
+ *
+ * ngbe_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+static int __init ngbe_init_module(void)
+{
+	int ret;
+	pr_info("%s - version %s\n", ngbe_driver_string, ngbe_driver_version);
+	pr_info("%s\n", ngbe_copyright);
+
+	ngbe_wq = create_singlethread_workqueue(ngbe_driver_name);
+	if (!ngbe_wq) {
+		pr_err("%s: Failed to create workqueue\n", ngbe_driver_name);
+		return -ENOMEM;
+	}
+
+#ifdef CONFIG_NGBE_PROCFS
+	if (ngbe_procfs_topdir_init())
+		pr_info("Procfs failed to initialize topdir\n");
+#endif
+
+#ifdef CONFIG_NGBE_DEBUG_FS
+	ngbe_dbg_init();
+#endif
+
+	ret = pci_register_driver(&ngbe_driver);
+	return ret;
+}
+
+module_init(ngbe_init_module);
+
+/**
+ * ngbe_exit_module - Driver Exit Cleanup Routine
+ *
+ * ngbe_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+static void __exit ngbe_exit_module(void)
+{
+	pci_unregister_driver(&ngbe_driver);
+#ifdef CONFIG_NGBE_PROCFS
+	ngbe_procfs_topdir_exit();
+#endif
+	destroy_workqueue(ngbe_wq);
+#ifdef CONFIG_NGBE_DEBUG_FS
+	ngbe_dbg_exit();
+#endif /* CONFIG_NGBE_DEBUG_FS */
+}
+
+module_exit(ngbe_exit_module);
+
+/* ngbe_main.c */
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_mbx.c b/drivers/net/ethernet/netswift/ngbe/ngbe_mbx.c
new file mode 100644
index 0000000000000..34167f78c207f
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_mbx.c
@@ -0,0 +1,687 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+#include "ngbe_type.h"
+#include "ngbe.h"
+#include "ngbe_mbx.h"
+
+
+/**
+ *  ngbe_read_mbx - Reads a message from the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to read
+ *
+ *  returns SUCCESS if it successfuly read message from buffer
+ **/
+int ngbe_read_mbx(struct ngbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct ngbe_mbx_info *mbx = &hw->mbx;
+	int err = NGBE_ERR_MBX;
+
+	/* limit read to size of mailbox */
+	if (size > mbx->size)
+		size = mbx->size;
+
+	err = TCALL(hw, mbx.ops.read, msg, size, mbx_id);
+
+	return err;
+}
+
+/**
+ *  ngbe_write_mbx - Write a message to the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer
+ **/
+int ngbe_write_mbx(struct ngbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct ngbe_mbx_info *mbx = &hw->mbx;
+	int err = 0;
+
+	if (size > mbx->size) {
+		err = NGBE_ERR_MBX;
+		ERROR_REPORT2(NGBE_ERROR_ARGUMENT,
+			     "Invalid mailbox message size %d", size);
+	} else
+		err = TCALL(hw, mbx.ops.write, msg, size, mbx_id);
+
+	return err;
+}
+
+/**
+ *  ngbe_check_for_msg - checks to see if someone sent us mail
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+int ngbe_check_for_msg(struct ngbe_hw *hw, u16 mbx_id)
+{
+	int err = NGBE_ERR_MBX;
+
+	err = TCALL(hw, mbx.ops.check_for_msg, mbx_id);
+
+	return err;
+}
+
+/**
+ *  ngbe_check_for_ack - checks to see if someone sent us ACK
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+int ngbe_check_for_ack(struct ngbe_hw *hw, u16 mbx_id)
+{
+	int err = NGBE_ERR_MBX;
+
+	err = TCALL(hw, mbx.ops.check_for_ack, mbx_id);
+
+	return err;
+}
+
+/**
+ *  ngbe_check_for_rst - checks to see if other side has reset
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+int ngbe_check_for_rst(struct ngbe_hw *hw, u16 mbx_id)
+{
+	struct ngbe_mbx_info *mbx = &hw->mbx;
+	int err = NGBE_ERR_MBX;
+
+	if (mbx->ops.check_for_rst)
+		err = mbx->ops.check_for_rst(hw, mbx_id);
+
+	return err;
+}
+
+/**
+ *  ngbe_poll_for_msg - Wait for message notification
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully received a message notification
+ **/
+int ngbe_poll_for_msg(struct ngbe_hw *hw, u16 mbx_id)
+{
+	struct ngbe_mbx_info *mbx = &hw->mbx;
+	int countdown = mbx->timeout;
+
+	if (!countdown || !mbx->ops.check_for_msg)
+		goto out;
+
+	while (countdown && TCALL(hw, mbx.ops.check_for_msg, mbx_id)) {
+		countdown--;
+		if (!countdown)
+			break;
+		udelay(mbx->udelay);
+	}
+
+	if (countdown == 0)
+		ERROR_REPORT2(NGBE_ERROR_POLLING,
+			   "Polling for VF%d mailbox message timedout", mbx_id);
+
+out:
+	return countdown ? 0 : NGBE_ERR_MBX;
+}
+
+/**
+ *  ngbe_poll_for_ack - Wait for message acknowledngbeent
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully received a message acknowledngbeent
+ **/
+int ngbe_poll_for_ack(struct ngbe_hw *hw, u16 mbx_id)
+{
+	struct ngbe_mbx_info *mbx = &hw->mbx;
+	int countdown = mbx->timeout;
+
+	if (!countdown || !mbx->ops.check_for_ack)
+		goto out;
+
+	while (countdown && TCALL(hw, mbx.ops.check_for_ack, mbx_id)) {
+		countdown--;
+		if (!countdown)
+			break;
+		udelay(mbx->udelay);
+	}
+
+	if (countdown == 0)
+		ERROR_REPORT2(NGBE_ERROR_POLLING,
+			     "Polling for VF%d mailbox ack timedout", mbx_id);
+
+out:
+	return countdown ? 0 : NGBE_ERR_MBX;
+}
+
+/**
+ *  ngbe_read_posted_mbx - Wait for message notification and receive message
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully received a message notification and
+ *  copied it into the receive buffer.
+ **/
+int ngbe_read_posted_mbx(struct ngbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct ngbe_mbx_info *mbx = &hw->mbx;
+	int err = NGBE_ERR_MBX;
+
+	if (!mbx->ops.read)
+		goto out;
+
+	err = ngbe_poll_for_msg(hw, mbx_id);
+
+	/* if ack received read message, otherwise we timed out */
+	if (!err)
+		err = TCALL(hw, mbx.ops.read, msg, size, mbx_id);
+out:
+	return err;
+}
+
+/**
+ *  ngbe_write_posted_mbx - Write a message to the mailbox, wait for ack
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer and
+ *  received an ack to that message within delay * timeout period
+ **/
+int ngbe_write_posted_mbx(struct ngbe_hw *hw, u32 *msg, u16 size,
+			   u16 mbx_id)
+{
+	struct ngbe_mbx_info *mbx = &hw->mbx;
+	int err;
+
+	/* exit if either we can't write or there isn't a defined timeout */
+	if (!mbx->timeout)
+		return NGBE_ERR_MBX;
+
+	/* send msg */
+	err = TCALL(hw, mbx.ops.write, msg, size, mbx_id);
+
+	/* if msg sent wait until we receive an ack */
+	if (!err)
+		err = ngbe_poll_for_ack(hw, mbx_id);
+
+	return err;
+}
+
+/**
+ *  ngbe_init_mbx_ops - Initialize MB function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Setups up the mailbox read and write message function pointers
+ **/
+void ngbe_init_mbx_ops(struct ngbe_hw *hw)
+{
+	struct ngbe_mbx_info *mbx = &hw->mbx;
+
+	mbx->ops.read_posted = ngbe_read_posted_mbx;
+	mbx->ops.write_posted = ngbe_write_posted_mbx;
+}
+
+/**
+ *  ngbe_read_v2p_mailbox - read v2p mailbox
+ *  @hw: pointer to the HW structure
+ *
+ *  This function is used to read the v2p mailbox without losing the read to
+ *  clear status bits.
+ **/
+u32 ngbe_read_v2p_mailbox(struct ngbe_hw *hw)
+{
+	u32 v2p_mailbox = rd32(hw, NGBE_VXMAILBOX);
+
+	v2p_mailbox |= hw->mbx.v2p_mailbox;
+	hw->mbx.v2p_mailbox |= v2p_mailbox & NGBE_VXMAILBOX_R2C_BITS;
+
+	return v2p_mailbox;
+}
+
+/**
+ *  ngbe_check_for_bit_vf - Determine if a status bit was set
+ *  @hw: pointer to the HW structure
+ *  @mask: bitmask for bits to be tested and cleared
+ *
+ *  This function is used to check for the read to clear bits within
+ *  the V2P mailbox.
+ **/
+int ngbe_check_for_bit_vf(struct ngbe_hw *hw, u32 mask)
+{
+	u32 mailbox = ngbe_read_v2p_mailbox(hw);
+
+	hw->mbx.v2p_mailbox &= ~mask;
+
+	return (mailbox & mask ? 0 : NGBE_ERR_MBX);
+}
+
+/**
+ *  ngbe_check_for_msg_vf - checks to see if the PF has sent mail
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the PF has set the Status bit or else ERR_MBX
+ **/
+int ngbe_check_for_msg_vf(struct ngbe_hw *hw, u16 mbx_id)
+{
+	int err = NGBE_ERR_MBX;
+
+	UNREFERENCED_PARAMETER(mbx_id);
+
+	/* read clear the pf sts bit */
+	if (!ngbe_check_for_bit_vf(hw, NGBE_VXMAILBOX_PFSTS)) {
+		err = 0;
+		hw->mbx.stats.reqs++;
+	}
+
+	return err;
+}
+
+/**
+ *  ngbe_check_for_ack_vf - checks to see if the PF has ACK'd
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the PF has set the ACK bit or else ERR_MBX
+ **/
+int ngbe_check_for_ack_vf(struct ngbe_hw *hw, u16 mbx_id)
+{
+	int err = NGBE_ERR_MBX;
+
+	UNREFERENCED_PARAMETER(mbx_id);
+
+	/* read clear the pf ack bit */
+	if (!ngbe_check_for_bit_vf(hw, NGBE_VXMAILBOX_PFACK)) {
+		err = 0;
+		hw->mbx.stats.acks++;
+	}
+
+	return err;
+}
+
+/**
+ *  ngbe_check_for_rst_vf - checks to see if the PF has reset
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns true if the PF has set the reset done bit or else false
+ **/
+int ngbe_check_for_rst_vf(struct ngbe_hw *hw, u16 mbx_id)
+{
+	int err = NGBE_ERR_MBX;
+
+	UNREFERENCED_PARAMETER(mbx_id);
+	if (!ngbe_check_for_bit_vf(hw, (NGBE_VXMAILBOX_RSTD |
+	    NGBE_VXMAILBOX_RSTI))) {
+		err = 0;
+		hw->mbx.stats.rsts++;
+	}
+
+	return err;
+}
+
+/**
+ *  ngbe_obtain_mbx_lock_vf - obtain mailbox lock
+ *  @hw: pointer to the HW structure
+ *
+ *  return SUCCESS if we obtained the mailbox lock
+ **/
+int ngbe_obtain_mbx_lock_vf(struct ngbe_hw *hw)
+{
+	int err = NGBE_ERR_MBX;
+	u32 mailbox;
+
+	/* Take ownership of the buffer */
+	wr32(hw, NGBE_VXMAILBOX, NGBE_VXMAILBOX_VFU);
+
+	/* reserve mailbox for vf use */
+	mailbox = ngbe_read_v2p_mailbox(hw);
+	if (mailbox & NGBE_VXMAILBOX_VFU)
+		err = 0;
+	else
+		ERROR_REPORT2(NGBE_ERROR_POLLING,
+			   "Failed to obtain mailbox lock for VF");
+
+	return err;
+}
+
+/**
+ *  ngbe_write_mbx_vf - Write a message to the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer
+ **/
+int ngbe_write_mbx_vf(struct ngbe_hw *hw, u32 *msg, u16 size,
+			      u16 mbx_id)
+{
+	int err;
+	u16 i;
+
+	UNREFERENCED_PARAMETER(mbx_id);
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	err = ngbe_obtain_mbx_lock_vf(hw);
+	if (err)
+		goto out_no_write;
+
+	/* flush msg and acks as we are overwriting the message buffer */
+	ngbe_check_for_msg_vf(hw, 0);
+	ngbe_check_for_ack_vf(hw, 0);
+
+	/* copy the caller specified message to the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		wr32a(hw, NGBE_VXMBMEM, i, msg[i]);
+
+	/* update stats */
+	hw->mbx.stats.msgs_tx++;
+
+	/* Drop VFU and interrupt the PF to tell it a message has been sent */
+	wr32(hw, NGBE_VXMAILBOX, NGBE_VXMAILBOX_REQ);
+
+out_no_write:
+	return err;
+}
+
+/**
+ *  ngbe_read_mbx_vf - Reads a message from the inbox intended for vf
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to read
+ *
+ *  returns SUCCESS if it successfuly read message from buffer
+ **/
+int ngbe_read_mbx_vf(struct ngbe_hw *hw, u32 *msg, u16 size,
+			     u16 mbx_id)
+{
+	int err = 0;
+	u16 i;
+	UNREFERENCED_PARAMETER(mbx_id);
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	err = ngbe_obtain_mbx_lock_vf(hw);
+	if (err)
+		goto out_no_read;
+
+	/* copy the message from the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		msg[i] = rd32a(hw, NGBE_VXMBMEM, i);
+
+	/* Acknowledge receipt and release mailbox, then we're done */
+	wr32(hw, NGBE_VXMAILBOX, NGBE_VXMAILBOX_ACK);
+
+	/* update stats */
+	hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+	return err;
+}
+
+/**
+ *  ngbe_init_mbx_params_vf - set initial values for vf mailbox
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes the hw->mbx struct to correct values for vf mailbox
+ */
+void ngbe_init_mbx_params_vf(struct ngbe_hw *hw)
+{
+	struct ngbe_mbx_info *mbx = &hw->mbx;
+
+	/* start mailbox as timed out and let the reset_hw call set the timeout
+	 * value to begin communications */
+	mbx->timeout = 0;
+	mbx->udelay = NGBE_VF_MBX_INIT_DELAY;
+
+	mbx->size = NGBE_VXMAILBOX_SIZE;
+
+	mbx->ops.read = ngbe_read_mbx_vf;
+	mbx->ops.write = ngbe_write_mbx_vf;
+	mbx->ops.read_posted = ngbe_read_posted_mbx;
+	mbx->ops.write_posted = ngbe_write_posted_mbx;
+	mbx->ops.check_for_msg = ngbe_check_for_msg_vf;
+	mbx->ops.check_for_ack = ngbe_check_for_ack_vf;
+	mbx->ops.check_for_rst = ngbe_check_for_rst_vf;
+
+	mbx->stats.msgs_tx = 0;
+	mbx->stats.msgs_rx = 0;
+	mbx->stats.reqs = 0;
+	mbx->stats.acks = 0;
+	mbx->stats.rsts = 0;
+}
+
+int ngbe_check_for_bit_pf(struct ngbe_hw *hw, u32 mask)
+{
+	u32 mbvficr = rd32(hw, NGBE_MBVFICR);
+	int err = NGBE_ERR_MBX;
+
+	if (mbvficr & mask) {
+		err = 0;
+		wr32(hw, NGBE_MBVFICR, mask);
+	}
+
+	return err;
+}
+
+/**
+ *  ngbe_check_for_msg_pf - checks to see if the VF has sent mail
+ *  @hw: pointer to the HW structure
+ *  @vf: the VF index
+ *
+ *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+int ngbe_check_for_msg_pf(struct ngbe_hw *hw, u16 vf)
+{
+	int err = NGBE_ERR_MBX;
+	u32 vf_bit = vf;
+
+	if (!ngbe_check_for_bit_pf(hw, NGBE_MBVFICR_VFREQ_VF1 << vf_bit)) {
+		err = 0;
+		hw->mbx.stats.reqs++;
+	}
+
+	return err;
+}
+
+/**
+ *  ngbe_check_for_ack_pf - checks to see if the VF has ACKed
+ *  @hw: pointer to the HW structure
+ *  @vf: the VF index
+ *
+ *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+int ngbe_check_for_ack_pf(struct ngbe_hw *hw, u16 vf)
+{
+	int err = NGBE_ERR_MBX;
+	u32 vf_bit = vf;
+
+	if (!ngbe_check_for_bit_pf(hw, NGBE_MBVFICR_VFACK_VF1 << vf_bit)) {
+		err = 0;
+		hw->mbx.stats.acks++;
+	}
+
+	return err;
+}
+
+/**
+ *  ngbe_check_for_rst_pf - checks to see if the VF has reset
+ *  @hw: pointer to the HW structure
+ *  @vf: the VF index
+ *
+ *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+int ngbe_check_for_rst_pf(struct ngbe_hw *hw, u16 vf)
+{
+	u32 vflre = 0;
+	int err = NGBE_ERR_MBX;
+
+	vflre = rd32(hw, NGBE_VFLRE);
+
+	if (vflre & (1 << vf)) {
+		err = 0;
+		wr32(hw, NGBE_VFLREC, (1 << vf));
+		hw->mbx.stats.rsts++;
+	}
+
+	return err;
+}
+
+/**
+ *  ngbe_obtain_mbx_lock_pf - obtain mailbox lock
+ *  @hw: pointer to the HW structure
+ *  @vf: the VF index
+ *
+ *  return SUCCESS if we obtained the mailbox lock
+ **/
+int ngbe_obtain_mbx_lock_pf(struct ngbe_hw *hw, u16 vf)
+{
+	int err = NGBE_ERR_MBX;
+	u32 mailbox;
+
+	/* Take ownership of the buffer */
+	wr32(hw, NGBE_PXMAILBOX(vf), NGBE_PXMAILBOX_PFU);
+
+	/* reserve mailbox for vf use */
+	mailbox = rd32(hw, NGBE_PXMAILBOX(vf));
+	if (mailbox & NGBE_PXMAILBOX_PFU)
+		err = 0;
+	else
+		ERROR_REPORT2(NGBE_ERROR_POLLING,
+			   "Failed to obtain mailbox lock for PF%d", vf);
+
+	return err;
+}
+
+/**
+ *  ngbe_write_mbx_pf - Places a message in the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @vf: the VF index
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer
+ **/
+int ngbe_write_mbx_pf(struct ngbe_hw *hw, u32 *msg, u16 size,
+			      u16 vf)
+{
+	int err;
+	u16 i;
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	err = ngbe_obtain_mbx_lock_pf(hw, vf);
+	if (err)
+		goto out_no_write;
+
+	/* flush msg and acks as we are overwriting the message buffer */
+	ngbe_check_for_msg_pf(hw, vf);
+	ngbe_check_for_ack_pf(hw, vf);
+
+	/* copy the caller specified message to the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		wr32a(hw, NGBE_PXMBMEM(vf), i, msg[i]);
+
+	/* Interrupt VF to tell it a message has been sent and release buffer*/
+	wr32(hw, NGBE_PXMAILBOX(vf), NGBE_PXMAILBOX_STS);
+
+	/* update stats */
+	hw->mbx.stats.msgs_tx++;
+
+out_no_write:
+	return err;
+}
+
+/**
+ *  ngbe_read_mbx_pf - Read a message from the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @vf: the VF index
+ *
+ *  This function copies a message from the mailbox buffer to the caller's
+ *  memory buffer.  The presumption is that the caller knows that there was
+ *  a message due to a VF request so no polling for message is needed.
+ **/
+int ngbe_read_mbx_pf(struct ngbe_hw *hw, u32 *msg, u16 size,
+			     u16 vf)
+{
+	int err;
+	u16 i;
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	err = ngbe_obtain_mbx_lock_pf(hw, vf);
+	if (err)
+		goto out_no_read;
+
+	/* copy the message to the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		msg[i] = rd32a(hw, NGBE_PXMBMEM(vf), i);
+
+	/* Acknowledge the message and release buffer */
+	wr32(hw, NGBE_PXMAILBOX(vf), NGBE_PXMAILBOX_ACK);
+
+	/* update stats */
+	hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+	return err;
+}
+
+/**
+ *  ngbe_init_mbx_params_pf - set initial values for pf mailbox
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes the hw->mbx struct to correct values for pf mailbox
+ */
+void ngbe_init_mbx_params_pf(struct ngbe_hw *hw)
+{
+	struct ngbe_mbx_info *mbx = &hw->mbx;
+
+	mbx->timeout = 0;
+	mbx->udelay = 0;
+
+	mbx->size = NGBE_VXMAILBOX_SIZE;
+
+	mbx->ops.read = ngbe_read_mbx_pf;
+	mbx->ops.write = ngbe_write_mbx_pf;
+	mbx->ops.read_posted = ngbe_read_posted_mbx;
+	mbx->ops.write_posted = ngbe_write_posted_mbx;
+	mbx->ops.check_for_msg = ngbe_check_for_msg_pf;
+	mbx->ops.check_for_ack = ngbe_check_for_ack_pf;
+	mbx->ops.check_for_rst = ngbe_check_for_rst_pf;
+
+	mbx->stats.msgs_tx = 0;
+	mbx->stats.msgs_rx = 0;
+	mbx->stats.reqs = 0;
+	mbx->stats.acks = 0;
+	mbx->stats.rsts = 0;
+}
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_mbx.h b/drivers/net/ethernet/netswift/ngbe/ngbe_mbx.h
new file mode 100644
index 0000000000000..5e89fa180f968
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_mbx.h
@@ -0,0 +1,167 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#ifndef _NGBE_MBX_H_
+#define _NGBE_MBX_H_
+
+#define NGBE_VXMAILBOX_SIZE    (16)
+
+/**
+ * VF Registers
+ **/
+#define NGBE_VXMAILBOX         0x00600
+#define NGBE_VXMAILBOX_REQ     ((0x1) << 0) /* Request for PF Ready bit */
+#define NGBE_VXMAILBOX_ACK     ((0x1) << 1) /* Ack PF message received */
+#define NGBE_VXMAILBOX_VFU     ((0x1) << 2) /* VF owns the mailbox buffer */
+#define NGBE_VXMAILBOX_PFU     ((0x1) << 3) /* PF owns the mailbox buffer */
+#define NGBE_VXMAILBOX_PFSTS   ((0x1) << 4) /* PF wrote a message in the MB */
+#define NGBE_VXMAILBOX_PFACK   ((0x1) << 5) /* PF ack the previous VF msg */
+#define NGBE_VXMAILBOX_RSTI    ((0x1) << 6) /* PF has reset indication */
+#define NGBE_VXMAILBOX_RSTD    ((0x1) << 7) /* PF has indicated reset done */
+#define NGBE_VXMAILBOX_R2C_BITS (NGBE_VXMAILBOX_RSTD | \
+	    NGBE_VXMAILBOX_PFSTS | NGBE_VXMAILBOX_PFACK)
+
+#define NGBE_VXMBMEM           0x00C00 /* 16*4B */
+
+/**
+ * PF Registers
+ **/
+#define NGBE_PXMAILBOX(i)      (0x00600 + (4 * (i))) /* i=[0,7] */
+#define NGBE_PXMAILBOX_STS     ((0x1) << 0) /* Initiate message send to VF */
+#define NGBE_PXMAILBOX_ACK     ((0x1) << 1) /* Ack message recv'd from VF */
+#define NGBE_PXMAILBOX_VFU     ((0x1) << 2) /* VF owns the mailbox buffer */
+#define NGBE_PXMAILBOX_PFU     ((0x1) << 3) /* PF owns the mailbox buffer */
+#define NGBE_PXMAILBOX_RVFU    ((0x1) << 4) /* Reset VFU - used when VF stuck*/
+
+#define NGBE_PXMBMEM(i)        (0x5000 + (64 * (i))) /* i=[0,7] */
+
+#define NGBE_VFLRP(i)          (0x00490 + (4 * (i))) /* i=[0,1] */
+#define NGBE_VFLRE          0x004A0
+#define NGBE_VFLREC         0x004A8
+
+/* SR-IOV specific macros */
+#define NGBE_MBVFICR             0x00480
+#define NGBE_MBVFICR_INDEX(vf) ((vf) >> 4)
+#define NGBE_MBVFICR_VFREQ_MASK (0x0000FFFF) /* bits for VF messages */
+#define NGBE_MBVFICR_VFREQ_VF1  (0x00000001) /* bit for VF 1 message */
+#define NGBE_MBVFICR_VFACK_MASK (0xFFFF0000) /* bits for VF acks */
+#define NGBE_MBVFICR_VFACK_VF1  (0x00010000) /* bit for VF 1 ack */
+
+/**
+ * Messages
+ **/
+/* If it's a NGBE_VF_* msg then it originates in the VF and is sent to the
+ * PF.  The reverse is true if it is NGBE_PF_*.
+ * Message ACK's are the value or'd with 0xF0000000
+ */
+#define NGBE_VT_MSGTYPE_ACK    0x80000000 /* Messages below or'd with
+					    * this are the ACK */
+#define NGBE_VT_MSGTYPE_NACK   0x40000000 /* Messages below or'd with
+					    * this are the NACK */
+#define NGBE_VT_MSGTYPE_CTS    0x20000000 /* Indicates that VF is still
+					    * clear to send requests */
+#define NGBE_VT_MSGINFO_SHIFT  16
+/* bits 23:16 are used for extra info for certain messages */
+#define NGBE_VT_MSGINFO_MASK   (0xFF << NGBE_VT_MSGINFO_SHIFT)
+
+/* definitions to support mailbox API version negotiation */
+
+/*
+ * each element denotes a version of the API; existing numbers may not
+ * change; any additions must go at the end
+ */
+enum ngbe_pfvf_api_rev {
+	ngbe_mbox_api_null,
+	ngbe_mbox_api_10,      /* API version 1.0, linux/freebsd VF driver */
+	ngbe_mbox_api_11,      /* API version 1.1, linux/freebsd VF driver */
+	ngbe_mbox_api_12,      /* API version 1.2, linux/freebsd VF driver */
+	ngbe_mbox_api_13,	/* API version 1.3, linux/freebsd VF driver */
+	ngbe_mbox_api_20,      /* API version 2.0, solaris Phase1 VF driver */
+	ngbe_mbox_api_unknown, /* indicates that API version is not known */
+};
+
+/* mailbox API, legacy requests */
+#define NGBE_VF_RESET          0x01 /* VF requests reset */
+#define NGBE_VF_SET_MAC_ADDR   0x02 /* VF requests PF to set MAC addr */
+#define NGBE_VF_SET_MULTICAST  0x03 /* VF requests PF to set MC addr */
+#define NGBE_VF_SET_VLAN       0x04 /* VF requests PF to set VLAN */
+
+/* mailbox API, version 1.0 VF requests */
+#define NGBE_VF_SET_LPE        0x05 /* VF requests PF to set VMOLR.LPE */
+#define NGBE_VF_SET_MACVLAN    0x06 /* VF requests PF for unicast filter */
+#define NGBE_VF_API_NEGOTIATE  0x08 /* negotiate API version */
+
+/* mailbox API, version 1.1 VF requests */
+#define NGBE_VF_GET_QUEUES     0x09 /* get queue configuration */
+
+/* mailbox API, version 1.2 VF requests */
+#define NGBE_VF_GET_RETA      0x0a    /* VF request for RETA */
+#define NGBE_VF_GET_RSS_KEY	0x0b    /* get RSS key */
+#define NGBE_VF_UPDATE_XCAST_MODE	0x0c
+#define NGBE_VF_BACKUP		0x8001 /* VF requests backup */
+
+#define NGBE_VF_GET_LINK_STATUS	0x20 /* VF get link status from PF */
+
+/* mode choices for IXGBE_VF_UPDATE_XCAST_MODE */
+enum ngbevf_xcast_modes {
+	NGBEVF_XCAST_MODE_NONE = 0,
+	NGBEVF_XCAST_MODE_MULTI,
+	NGBEVF_XCAST_MODE_ALLMULTI,
+	NGBEVF_XCAST_MODE_PROMISC,
+};
+
+/* GET_QUEUES return data indices within the mailbox */
+#define NGBE_VF_TX_QUEUES      1       /* number of Tx queues supported */
+#define NGBE_VF_RX_QUEUES      2       /* number of Rx queues supported */
+#define NGBE_VF_TRANS_VLAN     3       /* Indication of port vlan */
+#define NGBE_VF_DEF_QUEUE      4       /* Default queue offset */
+
+/* length of permanent address message returned from PF */
+#define NGBE_VF_PERMADDR_MSG_LEN       4
+/* word in permanent address message with the current multicast type */
+#define NGBE_VF_MC_TYPE_WORD           3
+
+#define NGBE_PF_CONTROL_MSG            0x0100 /* PF control message */
+
+/* mailbox API, version 2.0 VF requests */
+#define NGBE_VF_API_NEGOTIATE          0x08 /* negotiate API version */
+#define NGBE_VF_GET_QUEUES             0x09 /* get queue configuration */
+#define NGBE_VF_ENABLE_MACADDR         0x0A /* enable MAC address */
+#define NGBE_VF_DISABLE_MACADDR        0x0B /* disable MAC address */
+#define NGBE_VF_GET_MACADDRS           0x0C /* get all configured MAC addrs */
+#define NGBE_VF_SET_MCAST_PROMISC      0x0D /* enable multicast promiscuous */
+#define NGBE_VF_GET_MTU                0x0E /* get bounds on MTU */
+#define NGBE_VF_SET_MTU                0x0F /* set a specific MTU */
+
+/* mailbox API, version 2.0 PF requests */
+#define NGBE_PF_TRANSPARENT_VLAN       0x0101 /* enable transparent vlan */
+
+#define NGBE_VF_MBX_INIT_TIMEOUT       2000 /* number of retries on mailbox */
+#define NGBE_VF_MBX_INIT_DELAY         500  /* microseconds between retries */
+
+int ngbe_read_mbx(struct ngbe_hw *, u32 *, u16, u16);
+int ngbe_write_mbx(struct ngbe_hw *, u32 *, u16, u16);
+int ngbe_read_posted_mbx(struct ngbe_hw *, u32 *, u16, u16);
+int ngbe_write_posted_mbx(struct ngbe_hw *, u32 *, u16, u16);
+int ngbe_check_for_msg(struct ngbe_hw *, u16);
+int ngbe_check_for_ack(struct ngbe_hw *, u16);
+int ngbe_check_for_rst(struct ngbe_hw *, u16);
+void ngbe_init_mbx_ops(struct ngbe_hw *hw);
+void ngbe_init_mbx_params_vf(struct ngbe_hw *);
+void ngbe_init_mbx_params_pf(struct ngbe_hw *);
+
+#endif /* _NGBE_MBX_H_ */
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_param.c b/drivers/net/ethernet/netswift/ngbe/ngbe_param.c
new file mode 100644
index 0000000000000..92f0dd0f32734
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_param.c
@@ -0,0 +1,839 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+
+#include <linux/types.h>
+#include <linux/module.h>
+
+#include "ngbe.h"
+
+/* This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+#define NGBE_MAX_NIC   32
+#define OPTION_UNSET    -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED  1
+
+#define STRINGIFY(foo)  #foo /* magic for getting defines into strings */
+#define XSTRINGIFY(bar) STRINGIFY(bar)
+
+/* All parameters are treated the same, as an integer array of values.
+ * This macro just reduces the need to repeat the same declaration code
+ * over and over (plus this helps to avoid typo bugs).
+ */
+
+#define NGBE_PARAM_INIT { [0 ... NGBE_MAX_NIC] = OPTION_UNSET }
+
+#define NGBE_PARAM(X, desc) \
+	static int X[NGBE_MAX_NIC + 1] = NGBE_PARAM_INIT; \
+	static unsigned int num_##X; \
+	module_param_array(X, int, &num_##X, 0); \
+	MODULE_PARM_DESC(X, desc);
+
+/* IntMode (Interrupt Mode)
+ *
+ * Valid Range: 0-2
+ *  - 0 - Legacy Interrupt
+ *  - 1 - MSI Interrupt
+ *  - 2 - MSI-X Interrupt(s)
+ *
+ * Default Value: 2
+ */
+NGBE_PARAM(InterruptType, "Change Interrupt Mode (0=Legacy, 1=MSI, 2=MSI-X), "
+	    "default IntMode (deprecated)");
+NGBE_PARAM(IntMode, "Change Interrupt Mode (0=Legacy, 1=MSI, 2=MSI-X), "
+	    "default 2");
+#define NGBE_INT_LEGACY                0
+#define NGBE_INT_MSI                   1
+#define NGBE_INT_MSIX                  2
+#define NGBE_DEFAULT_INT               NGBE_INT_MSIX
+
+/* MQ - Multiple Queue enable/disable
+ *
+ * Valid Range: 0, 1
+ *  - 0 - disables MQ
+ *  - 1 - enables MQ
+ *
+ * Default Value: 1
+ */
+
+NGBE_PARAM(MQ, "Disable or enable Multiple Queues, default 1");
+
+/* RSS - Receive-Side Scaling (RSS) Descriptor Queues
+ *
+ * Valid Range: 0-64
+ *  - 0 - enables RSS and sets the Desc. Q's to min(64, num_online_cpus()).
+ *  - 1-64 - enables RSS and sets the Desc. Q's to the specified value.
+ *
+ * Default Value: 0
+ */
+
+NGBE_PARAM(RSS, "Number of Receive-Side Scaling Descriptor Queues, "
+	    "default 0=number of cpus");
+
+/* VMDQ - Virtual Machine Device Queues (VMDQ)
+ *
+ * Valid Range: 1-16
+ *  - 1 Disables VMDQ by allocating only a single queue.
+ *  - 2-16 - enables VMDQ and sets the Desc. Q's to the specified value.
+ *
+ * Default Value: 1
+ */
+
+#define NGBE_DEFAULT_NUM_VMDQ 8
+
+NGBE_PARAM(VMDQ, "Number of Virtual Machine Device Queues: 0/1 = disable, "
+	    "2-16 enable (default=" XSTRINGIFY(NGBE_DEFAULT_NUM_VMDQ) ")");
+
+#ifdef CONFIG_PCI_IOV
+/* max_vfs - SR I/O Virtualization
+ *
+ * Valid Range: 0-63
+ *  - 0 Disables SR-IOV
+ *  - 1-63 - enables SR-IOV and sets the number of VFs enabled
+ *
+ * Default Value: 0
+ */
+
+#define MAX_SRIOV_VFS 8
+
+NGBE_PARAM(max_vfs, "Number of Virtual Functions: 0 = disable (default), "
+	    "1-" XSTRINGIFY(MAX_SRIOV_VFS) " = enable "
+	    "this many VFs");
+
+/* VEPA - Set internal bridge to VEPA mode
+ *
+ * Valid Range: 0-1
+ *  - 0 Set bridge to VEB mode
+ *  - 1 Set bridge to VEPA mode
+ *
+ * Default Value: 0
+ */
+/*
+ *Note:
+ *=====
+ * This provides ability to ensure VEPA mode on the internal bridge even if
+ * the kernel does not support the netdev bridge setting operations.
+*/
+NGBE_PARAM(VEPA, "VEPA Bridge Mode: 0 = VEB (default), 1 = VEPA");
+#endif
+
+/* Interrupt Throttle Rate (interrupts/sec)
+ *
+ * Valid Range: 980-500000 (0=off, 1=dynamic)
+ *
+ * Default Value: 1
+ */
+#define DEFAULT_ITR             1
+NGBE_PARAM(InterruptThrottleRate, "Maximum interrupts per second, per vector, "
+	    "(0,1,980-500000), default 1");
+#define MAX_ITR         NGBE_MAX_INT_RATE
+#define MIN_ITR         NGBE_MIN_INT_RATE
+
+#ifndef CONFIG_NGBE_NO_LLI
+
+/* LLIPort (Low Latency Interrupt TCP Port)
+ *
+ * Valid Range: 0 - 65535
+ *
+ * Default Value: 0 (disabled)
+ */
+NGBE_PARAM(LLIPort, "Low Latency Interrupt TCP Port (0-65535)");
+
+#define DEFAULT_LLIPORT         0
+#define MAX_LLIPORT             0xFFFF
+#define MIN_LLIPORT             0
+
+
+/* LLISize (Low Latency Interrupt on Packet Size)
+ *
+ * Valid Range: 0 - 1500
+ *
+ * Default Value: 0 (disabled)
+ */
+NGBE_PARAM(LLISize, "Low Latency Interrupt on Packet Size (0-1500)");
+
+#define DEFAULT_LLISIZE         0
+#define MAX_LLISIZE             1500
+#define MIN_LLISIZE             0
+
+/* LLIEType (Low Latency Interrupt Ethernet Type)
+ *
+ * Valid Range: 0 - 0x8fff
+ *
+ * Default Value: 0 (disabled)
+ */
+NGBE_PARAM(LLIEType, "Low Latency Interrupt Ethernet Protocol Type");
+
+#define DEFAULT_LLIETYPE        0
+#define MAX_LLIETYPE            0x8fff
+#define MIN_LLIETYPE            0
+
+/* LLIVLANP (Low Latency Interrupt on VLAN priority threshold)
+ *
+ * Valid Range: 0 - 7
+ *
+ * Default Value: 0 (disabled)
+ */
+NGBE_PARAM(LLIVLANP, "Low Latency Interrupt on VLAN priority threshold");
+
+#define DEFAULT_LLIVLANP        0
+#define MAX_LLIVLANP            7
+#define MIN_LLIVLANP            0
+
+#endif /* CONFIG_NGBE_NO_LLI */
+
+/* Software ATR packet sample rate
+ *
+ * Valid Range: 0-255  0 = off, 1-255 = rate of Tx packet inspection
+ *
+ * Default Value: 20
+ */
+NGBE_PARAM(AtrSampleRate, "Software ATR Tx packet sample rate");
+
+#define NGBE_MAX_ATR_SAMPLE_RATE       255
+#define NGBE_MIN_ATR_SAMPLE_RATE       1
+#define NGBE_ATR_SAMPLE_RATE_OFF       0
+#define NGBE_DEFAULT_ATR_SAMPLE_RATE   20
+
+/* Enable/disable Large Receive Offload
+ *
+ * Valid Values: 0(off), 1(on)
+ *
+ * Default Value: 1
+ */
+NGBE_PARAM(LRO, "Large Receive Offload (0,1), default 1 = on");
+
+/* Enable/disable support for DMA coalescing
+ *
+ * Valid Values: 0(off), 41 - 10000(on)
+ *
+ * Default Value: 0
+ */
+NGBE_PARAM(dmac_watchdog,
+	    "DMA coalescing watchdog in microseconds (0,41-10000),"
+	    "default 0 = off");
+
+/* Rx buffer mode
+ *
+ * Valid Range: 0-1 0 = no header split, 1 = hdr split
+ *
+ * Default Value: 0
+ */
+NGBE_PARAM(RxBufferMode, "0=(default)no header split\n"
+			  "\t\t\t1=hdr split for recognized packet\n");
+
+#define NGBE_RXBUFMODE_NO_HEADER_SPLIT                 0
+#define NGBE_RXBUFMODE_HEADER_SPLIT                    1
+#define NGBE_DEFAULT_RXBUFMODE   NGBE_RXBUFMODE_NO_HEADER_SPLIT
+
+struct ngbe_option {
+	enum { enable_option, range_option, list_option } type;
+	const char *name;
+	const char *err;
+	const char *msg;
+	int def;
+	union {
+		struct { /* range_option info */
+			int min;
+			int max;
+		} r;
+		struct { /* list_option info */
+			int nr;
+			const struct ngbe_opt_list {
+				int i;
+				char *str;
+			} *p;
+		} l;
+	} arg;
+};
+
+static int ngbe_validate_option(u32 *value,
+					   struct ngbe_option *opt)
+{
+	int val = (int)*value;
+
+	if (val == OPTION_UNSET) {
+		ngbe_info("ngbe: Invalid %s specified (%d),  %s\n",
+			opt->name, val, opt->err);
+		*value = (u32)opt->def;
+		return 0;
+	}
+
+	switch (opt->type) {
+	case enable_option:
+		switch (val) {
+		case OPTION_ENABLED:
+			ngbe_info("ngbe: %s Enabled\n", opt->name);
+			return 0;
+		case OPTION_DISABLED:
+			ngbe_info("ngbe: %s Disabled\n", opt->name);
+			return 0;
+		}
+		break;
+	case range_option:
+		if ((val >= opt->arg.r.min && val <= opt->arg.r.max) ||
+			val == opt->def) {
+			if (opt->msg)
+				ngbe_info("ngbe: %s set to %d, %s\n",
+				       opt->name, val, opt->msg);
+			else
+				ngbe_info("ngbe: %s set to %d\n",
+				       opt->name, val);
+			return 0;
+		}
+		break;
+	case list_option: {
+		int i;
+		const struct ngbe_opt_list *ent;
+
+		for (i = 0; i < opt->arg.l.nr; i++) {
+			ent = &opt->arg.l.p[i];
+			if (val == ent->i) {
+				if (ent->str[0] != '\0')
+					ngbe_info("%s\n", ent->str);
+				return 0;
+			}
+		}
+	}
+		break;
+	default:
+		BUG_ON(1);
+	}
+
+	ngbe_info("ngbe: Invalid %s specified (%d),  %s\n",
+			opt->name, val, opt->err);
+	*value = (u32)opt->def;
+	return -1;
+}
+
+/**
+ * ngbe_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input.  If an invalid value is given, or if no user specified
+ * value exists, a default value is used.  The final value is stored
+ * in a variable in the adapter structure.
+ **/
+void ngbe_check_options(struct ngbe_adapter *adapter)
+{
+	u32 bd = adapter->bd_number;
+	u32 *aflags = &adapter->flags;
+	struct ngbe_ring_feature *feature = adapter->ring_feature;
+	u32 vmdq;
+
+	if (bd >= NGBE_MAX_NIC) {
+		ngbe_notice("Warning: no configuration for board #%d\n", bd);
+		ngbe_notice("Using defaults for all values\n");
+	}
+
+	{ /* Interrupt Mode */
+		u32 int_mode;
+		static struct ngbe_option opt = {
+			.type = range_option,
+			.name = "Interrupt Mode",
+			.err =
+			  "using default of "__MODULE_STRING(NGBE_DEFAULT_INT),
+			.def = NGBE_DEFAULT_INT,
+			.arg = { .r = { .min = NGBE_INT_LEGACY,
+					.max = NGBE_INT_MSIX} }
+		};
+
+		if (num_IntMode > bd || num_InterruptType > bd) {
+			int_mode = IntMode[bd];
+			if (int_mode == OPTION_UNSET)
+				int_mode = InterruptType[bd];
+			ngbe_validate_option(&int_mode, &opt);
+			switch (int_mode) {
+			case NGBE_INT_MSIX:
+				if (!(*aflags & NGBE_FLAG_MSIX_CAPABLE))
+					ngbe_info(
+							"Ignoring MSI-X setting; "
+							"support unavailable\n");
+				break;
+			case NGBE_INT_MSI:
+				if (!(*aflags & NGBE_FLAG_MSI_CAPABLE)) {
+					ngbe_info(
+							"Ignoring MSI setting; "
+							"support unavailable\n");
+				} else {
+					*aflags &= ~NGBE_FLAG_MSIX_CAPABLE;
+				}
+				break;
+			case NGBE_INT_LEGACY:
+			default:
+				*aflags &= ~NGBE_FLAG_MSIX_CAPABLE;
+				*aflags &= ~NGBE_FLAG_MSI_CAPABLE;
+				break;
+			}
+		} else {
+			/* default settings */
+			if (opt.def == NGBE_INT_MSIX &&
+			    *aflags & NGBE_FLAG_MSIX_CAPABLE) {
+				*aflags |= NGBE_FLAG_MSIX_CAPABLE;
+				*aflags |= NGBE_FLAG_MSI_CAPABLE;
+			} else if (opt.def == NGBE_INT_MSI &&
+			    *aflags & NGBE_FLAG_MSI_CAPABLE) {
+				*aflags &= ~NGBE_FLAG_MSIX_CAPABLE;
+				*aflags |= NGBE_FLAG_MSI_CAPABLE;
+			} else {
+				*aflags &= ~NGBE_FLAG_MSIX_CAPABLE;
+				*aflags &= ~NGBE_FLAG_MSI_CAPABLE;
+			}
+		}
+	}
+	{ /* Multiple Queue Support */
+		static struct ngbe_option opt = {
+			.type = enable_option,
+			.name = "Multiple Queue Support",
+			.err  = "defaulting to Enabled",
+			.def  = OPTION_ENABLED
+		};
+
+		if (num_MQ > bd) {
+			u32 mq = MQ[bd];
+			ngbe_validate_option(&mq, &opt);
+			if (mq)
+				*aflags |= NGBE_FLAG_MQ_CAPABLE;
+			else
+				*aflags &= ~NGBE_FLAG_MQ_CAPABLE;
+		} else {
+			if (opt.def == OPTION_ENABLED)
+				*aflags |= NGBE_FLAG_MQ_CAPABLE;
+			else
+				*aflags &= ~NGBE_FLAG_MQ_CAPABLE;
+		}
+		/* Check Interoperability */
+		if ((*aflags & NGBE_FLAG_MQ_CAPABLE) &&
+		    !(*aflags & NGBE_FLAG_MSIX_CAPABLE)) {
+			DPRINTK(PROBE, INFO,
+				"Multiple queues are not supported while MSI-X "
+				"is disabled.  Disabling Multiple Queues.\n");
+			*aflags &= ~NGBE_FLAG_MQ_CAPABLE;
+		}
+	}
+
+	{ /* Receive-Side Scaling (RSS) */
+		static struct ngbe_option opt = {
+			.type = range_option,
+			.name = "Receive-Side Scaling (RSS)",
+			.err  = "using default.",
+			.def  = 0,
+			.arg  = { .r = { .min = 0,
+					 .max = 1} }
+		};
+		u32 rss = RSS[bd];
+		/* adjust Max allowed RSS queues based on MAC type */
+		opt.arg.r.max = ngbe_max_rss_indices(adapter);
+
+		if (num_RSS > bd) {
+			ngbe_validate_option(&rss, &opt);
+			/* base it off num_online_cpus() with hardware limit */
+			if (!rss)
+				rss = min_t(int, opt.arg.r.max,
+					    num_online_cpus());
+
+			feature[RING_F_RSS].limit = (u16)rss;
+		} else if (opt.def == 0) {
+			rss = min_t(int, ngbe_max_rss_indices(adapter),
+				    num_online_cpus());
+			feature[RING_F_RSS].limit = rss;
+		}
+		/* Check Interoperability */
+		if (rss > 1) {
+			if (!(*aflags & NGBE_FLAG_MQ_CAPABLE)) {
+				DPRINTK(PROBE, INFO,
+					"Multiqueue is disabled.  "
+					"Limiting RSS.\n");
+				feature[RING_F_RSS].limit = 1;
+			}
+		}
+		adapter->flags2 |= NGBE_FLAG2_RSS_ENABLED;
+	}
+	{ /* Virtual Machine Device Queues (VMDQ) */
+		static struct ngbe_option opt = {
+			.type = range_option,
+			.name = "Virtual Machine Device Queues (VMDQ)",
+			.err  = "defaulting to Disabled",
+			.def  = OPTION_DISABLED,
+			.arg  = { .r = { .min = OPTION_DISABLED,
+					 .max = NGBE_MAX_VMDQ_INDICES
+				} }
+		};
+
+		if (num_VMDQ > bd) {
+			vmdq = VMDQ[bd];
+
+			ngbe_validate_option(&vmdq, &opt);
+
+			/* zero or one both mean disabled from our driver's
+			 * perspective */
+			if (vmdq > 1) {
+				*aflags |= NGBE_FLAG_VMDQ_ENABLED;
+			} else
+				*aflags &= ~NGBE_FLAG_VMDQ_ENABLED;
+
+			feature[RING_F_VMDQ].limit = (u16)vmdq;
+		} else {
+			if (opt.def == OPTION_DISABLED)
+				*aflags &= ~NGBE_FLAG_VMDQ_ENABLED;
+			else
+				*aflags |= NGBE_FLAG_VMDQ_ENABLED;
+
+			feature[RING_F_VMDQ].limit = opt.def;
+		}
+
+		/* Check Interoperability */
+		if (*aflags & NGBE_FLAG_VMDQ_ENABLED) {
+			if (!(*aflags & NGBE_FLAG_MQ_CAPABLE)) {
+				DPRINTK(PROBE, INFO,
+					"VMDQ is not supported while multiple "
+					"queues are disabled.  "
+					"Disabling VMDQ.\n");
+				*aflags &= ~NGBE_FLAG_VMDQ_ENABLED;
+				feature[RING_F_VMDQ].limit = 0;
+			}
+		}
+	}
+#ifdef CONFIG_PCI_IOV
+	{ /* Single Root I/O Virtualization (SR-IOV) */
+		static struct ngbe_option opt = {
+			.type = range_option,
+			.name = "I/O Virtualization (IOV)",
+			.err  = "defaulting to Disabled",
+			.def  = OPTION_DISABLED,
+			.arg  = { .r = { .min = OPTION_DISABLED,
+					 .max = MAX_SRIOV_VFS} }
+		};
+
+		if (num_max_vfs > bd) {
+			u32 vfs = max_vfs[bd];
+			if (ngbe_validate_option(&vfs, &opt)) {
+				vfs = 0;
+				DPRINTK(PROBE, INFO,
+					"max_vfs out of range "
+					"Disabling SR-IOV.\n");
+			}
+
+			adapter->num_vfs = vfs;
+
+			if (vfs)
+				*aflags |= NGBE_FLAG_SRIOV_ENABLED;
+			else
+				*aflags &= ~NGBE_FLAG_SRIOV_ENABLED;
+		} else {
+			if (opt.def == OPTION_DISABLED) {
+				adapter->num_vfs = 0;
+				*aflags &= ~NGBE_FLAG_SRIOV_ENABLED;
+			} else {
+				adapter->num_vfs = opt.def;
+				*aflags |= NGBE_FLAG_SRIOV_ENABLED;
+			}
+		}
+
+		/* Check Interoperability */
+		if (*aflags & NGBE_FLAG_SRIOV_ENABLED) {
+			if (!(*aflags & NGBE_FLAG_SRIOV_CAPABLE)) {
+				DPRINTK(PROBE, INFO,
+					"IOV is not supported on this "
+					"hardware.  Disabling IOV.\n");
+				*aflags &= ~NGBE_FLAG_SRIOV_ENABLED;
+				adapter->num_vfs = 0;
+			} else if (!(*aflags & NGBE_FLAG_MQ_CAPABLE)) {
+				DPRINTK(PROBE, INFO,
+					"IOV is not supported while multiple "
+					"queues are disabled.  "
+					"Disabling IOV.\n");
+				*aflags &= ~NGBE_FLAG_SRIOV_ENABLED;
+				adapter->num_vfs = 0;
+			}
+		}
+	}
+	{ /* VEPA Bridge Mode enable for SR-IOV mode */
+		static struct ngbe_option opt = {
+			.type = range_option,
+			.name = "VEPA Bridge Mode Enable",
+			.err  = "defaulting to disabled",
+			.def  = OPTION_DISABLED,
+			.arg  = { .r = { .min = OPTION_DISABLED,
+					 .max = OPTION_ENABLED} }
+		};
+
+		if (num_VEPA > bd) {
+			u32 vepa = VEPA[bd];
+			ngbe_validate_option(&vepa, &opt);
+			if (vepa)
+				adapter->flags |=
+					NGBE_FLAG_SRIOV_VEPA_BRIDGE_MODE;
+		} else {
+			if (opt.def == OPTION_ENABLED)
+				adapter->flags |=
+					NGBE_FLAG_SRIOV_VEPA_BRIDGE_MODE;
+		}
+	}
+#endif /* CONFIG_PCI_IOV */
+	{ /* Interrupt Throttling Rate */
+		static struct ngbe_option opt = {
+			.type = range_option,
+			.name = "Interrupt Throttling Rate (ints/sec)",
+			.err  = "using default of "__MODULE_STRING(DEFAULT_ITR),
+			.def  = DEFAULT_ITR,
+			.arg  = { .r = { .min = MIN_ITR,
+					 .max = MAX_ITR } }
+		};
+
+		if (num_InterruptThrottleRate > bd) {
+			u32 itr = InterruptThrottleRate[bd];
+			switch (itr) {
+			case 0:
+				DPRINTK(PROBE, INFO, "%s turned off\n",
+					opt.name);
+				adapter->rx_itr_setting = 0;
+				break;
+			case 1:
+				DPRINTK(PROBE, INFO, "dynamic interrupt "
+					"throttling enabled\n");
+				adapter->rx_itr_setting = 1;
+				break;
+			default:
+				ngbe_validate_option(&itr, &opt);
+				/* the first bit is used as control */
+				adapter->rx_itr_setting = (u16)((1000000/itr) << 2);
+				break;
+			}
+			adapter->tx_itr_setting = adapter->rx_itr_setting;
+		} else {
+			adapter->rx_itr_setting = opt.def;
+			adapter->tx_itr_setting = opt.def;
+		}
+	}
+#ifndef CONFIG_NGBE_NO_LLI
+	{ /* Low Latency Interrupt TCP Port*/
+		static struct ngbe_option opt = {
+			.type = range_option,
+			.name = "Low Latency Interrupt TCP Port",
+			.err  = "using default of "
+					__MODULE_STRING(DEFAULT_LLIPORT),
+			.def  = DEFAULT_LLIPORT,
+			.arg  = { .r = { .min = MIN_LLIPORT,
+					 .max = MAX_LLIPORT } }
+		};
+
+		if (num_LLIPort > bd) {
+			adapter->lli_port = LLIPort[bd];
+			if (adapter->lli_port) {
+				ngbe_validate_option(&adapter->lli_port, &opt);
+			} else {
+				DPRINTK(PROBE, INFO, "%s turned off\n",
+					opt.name);
+			}
+		} else {
+			adapter->lli_port = opt.def;
+		}
+	}
+	{ /* Low Latency Interrupt on Packet Size */
+		static struct ngbe_option opt = {
+			.type = range_option,
+			.name = "Low Latency Interrupt on Packet Size",
+			.err  = "using default of "
+					__MODULE_STRING(DEFAULT_LLISIZE),
+			.def  = DEFAULT_LLISIZE,
+			.arg  = { .r = { .min = MIN_LLISIZE,
+					 .max = MAX_LLISIZE } }
+		};
+
+		if (num_LLISize > bd) {
+			adapter->lli_size = LLISize[bd];
+			if (adapter->lli_size) {
+				ngbe_validate_option(&adapter->lli_size, &opt);
+			} else {
+				DPRINTK(PROBE, INFO, "%s turned off\n",
+					opt.name);
+			}
+		} else {
+			adapter->lli_size = opt.def;
+		}
+	}
+	{ /* Low Latency Interrupt EtherType*/
+		static struct ngbe_option opt = {
+			.type = range_option,
+			.name = "Low Latency Interrupt on Ethernet Protocol "
+				"Type",
+			.err  = "using default of "
+					__MODULE_STRING(DEFAULT_LLIETYPE),
+			.def  = DEFAULT_LLIETYPE,
+			.arg  = { .r = { .min = MIN_LLIETYPE,
+					 .max = MAX_LLIETYPE } }
+		};
+
+		if (num_LLIEType > bd) {
+			adapter->lli_etype = LLIEType[bd];
+			if (adapter->lli_etype) {
+				ngbe_validate_option(&adapter->lli_etype,
+						      &opt);
+			} else {
+				DPRINTK(PROBE, INFO, "%s turned off\n",
+					opt.name);
+			}
+		} else {
+			adapter->lli_etype = opt.def;
+		}
+	}
+	{ /* LLI VLAN Priority */
+		static struct ngbe_option opt = {
+			.type = range_option,
+			.name = "Low Latency Interrupt on VLAN priority "
+				"threshold",
+			.err  = "using default of "
+					__MODULE_STRING(DEFAULT_LLIVLANP),
+			.def  = DEFAULT_LLIVLANP,
+			.arg  = { .r = { .min = MIN_LLIVLANP,
+					 .max = MAX_LLIVLANP } }
+		};
+
+		if (num_LLIVLANP > bd) {
+			adapter->lli_vlan_pri = LLIVLANP[bd];
+			if (adapter->lli_vlan_pri) {
+				ngbe_validate_option(&adapter->lli_vlan_pri,
+						      &opt);
+			} else {
+				DPRINTK(PROBE, INFO, "%s turned off\n",
+					opt.name);
+			}
+		} else {
+			adapter->lli_vlan_pri = opt.def;
+		}
+	}
+#endif /* CONFIG_NGBE_NO_LLI */
+
+	{ /* Flow Director ATR Tx sample packet rate */
+		static struct ngbe_option opt = {
+			.type = range_option,
+			.name = "Software ATR Tx packet sample rate",
+			.err = "using default of "
+				__MODULE_STRING(NGBE_DEFAULT_ATR_SAMPLE_RATE),
+			.def = NGBE_DEFAULT_ATR_SAMPLE_RATE,
+			.arg = {.r = {.min = NGBE_ATR_SAMPLE_RATE_OFF,
+				      .max = NGBE_MAX_ATR_SAMPLE_RATE} }
+		};
+		static const char atr_string[] =
+					    "ATR Tx Packet sample rate set to";
+
+		if (num_AtrSampleRate > bd) {
+			adapter->atr_sample_rate = AtrSampleRate[bd];
+
+			if (adapter->atr_sample_rate) {
+				ngbe_validate_option(&adapter->atr_sample_rate,
+						      &opt);
+				DPRINTK(PROBE, INFO, "%s %d\n", atr_string,
+					adapter->atr_sample_rate);
+			}
+		} else {
+			adapter->atr_sample_rate = opt.def;
+		}
+	}
+
+	{ /* LRO - Set Large Receive Offload */
+		struct ngbe_option opt = {
+			.type = enable_option,
+			.name = "LRO - Large Receive Offload",
+			.err  = "defaulting to Disabled",
+			.def  = OPTION_DISABLED
+		};
+		struct net_device *netdev = adapter->netdev;
+		opt.def = OPTION_DISABLED;
+
+		if (num_LRO > bd) {
+			u32 lro = LRO[bd];
+			ngbe_validate_option(&lro, &opt);
+			if (lro)
+				netdev->features |= NETIF_F_LRO;
+			else
+				netdev->features &= ~NETIF_F_LRO;
+		} else if (opt.def == OPTION_ENABLED) {
+			netdev->features |= NETIF_F_LRO;
+		} else {
+			netdev->features &= ~NETIF_F_LRO;
+		}
+
+		if ((netdev->features & NETIF_F_LRO)) {
+			DPRINTK(PROBE, INFO,
+				"RSC is not supported on this "
+				"hardware.  Disabling RSC.\n");
+			netdev->features &= ~NETIF_F_LRO;
+		}
+	}
+	{ /* DMA Coalescing */
+		struct ngbe_option opt = {
+			.type = range_option,
+			.name = "dmac_watchdog",
+			.err  = "defaulting to 0 (disabled)",
+			.def  = 0,
+			.arg  = { .r = { .min = 41, .max = 10000 } },
+		};
+		const char *cmsg = "DMA coalescing not supported on this "
+				   "hardware";
+
+		opt.err = cmsg;
+		opt.msg = cmsg;
+		opt.arg.r.min = 0;
+		opt.arg.r.max = 0;
+
+		if (num_dmac_watchdog > bd) {
+			u32 dmac_wd = dmac_watchdog[bd];
+
+			ngbe_validate_option(&dmac_wd, &opt);
+			adapter->hw.mac.dmac_config.watchdog_timer = (u16)dmac_wd;
+		} else {
+			adapter->hw.mac.dmac_config.watchdog_timer = opt.def;
+		}
+	}
+
+	{ /* Rx buffer mode */
+		u32 rx_buf_mode;
+		static struct ngbe_option opt = {
+			.type = range_option,
+			.name = "Rx buffer mode",
+			.err = "using default of "
+				__MODULE_STRING(NGBE_DEFAULT_RXBUFMODE),
+			.def = NGBE_DEFAULT_RXBUFMODE,
+			.arg = {.r = {.min = NGBE_RXBUFMODE_NO_HEADER_SPLIT,
+							.max = NGBE_RXBUFMODE_HEADER_SPLIT} }
+
+		};
+
+		if (num_RxBufferMode > bd) {
+			rx_buf_mode = RxBufferMode[bd];
+			ngbe_validate_option(&rx_buf_mode, &opt);
+			switch (rx_buf_mode) {
+			case NGBE_RXBUFMODE_NO_HEADER_SPLIT:
+				*aflags &= ~NGBE_FLAG_RX_HS_ENABLED;
+				break;
+			case NGBE_RXBUFMODE_HEADER_SPLIT:
+				*aflags |= NGBE_FLAG_RX_HS_ENABLED;
+				break;
+			default:
+				break;
+			}
+		} else {
+			*aflags &= ~NGBE_FLAG_RX_HS_ENABLED;
+		}
+	}
+}
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_pcierr.c b/drivers/net/ethernet/netswift/ngbe/ngbe_pcierr.c
new file mode 100644
index 0000000000000..8d47bfabd6ad8
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_pcierr.c
@@ -0,0 +1,257 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include "ngbe_pcierr.h"
+#include "ngbe.h"
+
+#define NGBE_ROOT_PORT_INTR_ON_MESG_MASK	(PCI_ERR_ROOT_CMD_COR_EN|	\
+					PCI_ERR_ROOT_CMD_NONFATAL_EN|	\
+					PCI_ERR_ROOT_CMD_FATAL_EN)
+
+#ifndef PCI_ERS_RESULT_NO_AER_DRIVER
+/* No AER capabilities registered for the driver */
+#define PCI_ERS_RESULT_NO_AER_DRIVER ((__force pci_ers_result_t) 6)
+#endif
+
+static pci_ers_result_t merge_result(enum pci_ers_result orig,
+						  enum pci_ers_result new)
+{
+	if (new == PCI_ERS_RESULT_NO_AER_DRIVER)
+		return PCI_ERS_RESULT_NO_AER_DRIVER;
+	if (new == PCI_ERS_RESULT_NONE)
+		return orig;
+	switch (orig) {
+	case PCI_ERS_RESULT_CAN_RECOVER:
+	case PCI_ERS_RESULT_RECOVERED:
+		orig = new;
+		break;
+	case PCI_ERS_RESULT_DISCONNECT:
+		if (new == PCI_ERS_RESULT_NEED_RESET)
+			orig = PCI_ERS_RESULT_NEED_RESET;
+		break;
+	default:
+		break;
+	}
+	return orig;
+}
+
+static int ngbe_report_error_detected(struct pci_dev *dev,
+				 enum pci_channel_state state,
+				 enum pci_ers_result *result)
+{
+	pci_ers_result_t vote;
+	const struct pci_error_handlers *err_handler;
+
+	device_lock(&dev->dev);
+	if (
+		!dev->driver ||
+		!dev->driver->err_handler ||
+		!dev->driver->err_handler->error_detected) {
+		/*
+		 * If any device in the subtree does not have an error_detected
+		 * callback, PCI_ERS_RESULT_NO_AER_DRIVER prevents subsequent
+		 * error callbacks of "any" device in the subtree, and will
+		 * exit in the disconnected error state.
+		 */
+		if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
+			vote = PCI_ERS_RESULT_NO_AER_DRIVER;
+		else
+			vote = PCI_ERS_RESULT_NONE;
+	} else {
+		err_handler = dev->driver->err_handler;
+		vote = err_handler->error_detected(dev, state);
+	}
+
+	*result = merge_result(*result, vote);
+	device_unlock(&dev->dev);
+	return 0;
+}
+
+static int ngbe_report_frozen_detected(struct pci_dev *dev, void *data)
+{
+	return ngbe_report_error_detected(dev, pci_channel_io_frozen, data);
+}
+
+static int ngbe_report_mmio_enabled(struct pci_dev *dev, void *data)
+{
+	pci_ers_result_t vote, *result = data;
+	const struct pci_error_handlers *err_handler;
+
+	device_lock(&dev->dev);
+	if (!dev->driver ||
+		!dev->driver->err_handler ||
+		!dev->driver->err_handler->mmio_enabled)
+		goto out;
+
+	err_handler = dev->driver->err_handler;
+	vote = err_handler->mmio_enabled(dev);
+	*result = merge_result(*result, vote);
+out:
+	device_unlock(&dev->dev);
+	return 0;
+}
+
+static int ngbe_report_slot_reset(struct pci_dev *dev, void *data)
+{
+	pci_ers_result_t vote, *result = data;
+	const struct pci_error_handlers *err_handler;
+
+	device_lock(&dev->dev);
+	if (!dev->driver ||
+		!dev->driver->err_handler ||
+		!dev->driver->err_handler->slot_reset)
+		goto out;
+
+	err_handler = dev->driver->err_handler;
+	vote = err_handler->slot_reset(dev);
+	*result = merge_result(*result, vote);
+out:
+	device_unlock(&dev->dev);
+	return 0;
+}
+
+static int ngbe_report_resume(struct pci_dev *dev, void *data)
+{
+	const struct pci_error_handlers *err_handler;
+
+	device_lock(&dev->dev);
+	dev->error_state = pci_channel_io_normal;
+	if (
+		!dev->driver ||
+		!dev->driver->err_handler ||
+		!dev->driver->err_handler->resume)
+		goto out;
+
+	err_handler = dev->driver->err_handler;
+	err_handler->resume(dev);
+out:
+	device_unlock(&dev->dev);
+	return 0;
+}
+
+void ngbe_pcie_do_recovery(struct pci_dev *dev)
+{
+	pci_ers_result_t status = PCI_ERS_RESULT_CAN_RECOVER;
+	struct pci_bus *bus;
+	u32 reg32;
+	int pos;
+	int delay = 1;
+	u32 id;
+	u16 ctrl;
+	/*
+	 * Error recovery runs on all subordinates of the first downstream port.
+	 * If the downstream port detected the error, it is cleared at the end.
+	 */
+	if (!(pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
+	      pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM))
+		dev = dev->bus->self;
+	bus = dev->subordinate;
+
+	pci_walk_bus(bus, ngbe_report_frozen_detected, &status);
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+	if (pos) {
+		/* Disable Root's interrupt in response to error messages */
+		pci_read_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, &reg32);
+		reg32 &= ~NGBE_ROOT_PORT_INTR_ON_MESG_MASK;
+		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, reg32);
+	}
+
+	pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl);
+	ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
+	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
+
+	/*
+	 * 	 * PCI spec v3.0 7.6.4.2 requires minimum Trst of 1ms.  Double
+	 * 	 * this to 2ms to ensure that we meet the minimum requirement.
+	 * 	 */
+
+	msleep(2);
+	ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
+
+	/*
+	 * 	 * Trhfa for conventional PCI is 2^25 clock cycles.
+	 * 	 * Assuming a minimum 33MHz clock this results in a 1s
+	 * 	 * delay before we can consider subordinate devices to
+	 * 	 * be re-initialized.  PCIe has some ways to shorten this,
+	 * 	 * but we don't make use of them yet.
+	 * 	 */
+	ssleep(1);
+
+	pci_read_config_dword(dev, PCI_COMMAND, &id);
+	while (id == ~0) {
+		if (delay > 60000) {
+			pci_warn(dev, "not ready %dms after %s; giving up\n",
+				 delay - 1, "bus_reset");
+			return;
+		}
+
+		if (delay > 1000)
+			pci_info(dev, "not ready %dms after %s; waiting\n",
+				 delay - 1, "bus_reset");
+
+		msleep(delay);
+		delay *= 2;
+		pci_read_config_dword(dev, PCI_COMMAND, &id);
+	}
+
+	if (delay > 1000)
+		pci_info(dev, "ready %dms after %s\n", delay - 1,
+				 "bus_reset");
+
+	pci_info(dev, "Root Port link has been reset\n");
+
+	if (pos) {
+	/* Clear Root Error Status */
+	pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &reg32);
+	pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, reg32);
+
+	/* Enable Root Port's interrupt in response to error messages */
+	pci_read_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, &reg32);
+	reg32 |= NGBE_ROOT_PORT_INTR_ON_MESG_MASK;
+	pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, reg32);
+	}
+
+	if (status == PCI_ERS_RESULT_CAN_RECOVER) {
+		status = PCI_ERS_RESULT_RECOVERED;
+		pci_dbg(dev, "broadcast mmio_enabled message\n");
+		pci_walk_bus(bus, ngbe_report_mmio_enabled, &status);
+	}
+
+	if (status == PCI_ERS_RESULT_NEED_RESET) {
+		/*
+		 * TODO: Should call platform-specific
+		 * functions to reset slot before calling
+		 * drivers' slot_reset callbacks?
+		 */
+		status = PCI_ERS_RESULT_RECOVERED;
+		pci_dbg(dev, "broadcast slot_reset message\n");
+		pci_walk_bus(bus, ngbe_report_slot_reset, &status);
+	}
+
+	if (status != PCI_ERS_RESULT_RECOVERED)
+		goto failed;
+
+	pci_dbg(dev, "broadcast resume message\n");
+	pci_walk_bus(bus, ngbe_report_resume, &status);
+
+failed:
+	return;
+}
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_pcierr.h b/drivers/net/ethernet/netswift/ngbe/ngbe_pcierr.h
new file mode 100644
index 0000000000000..f92def4d21667
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_pcierr.h
@@ -0,0 +1,23 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+#ifndef _NGBE_PCIERR_H_
+#define _NGBE_PCIERR_H_
+
+void ngbe_pcie_do_recovery(struct pci_dev *dev);
+#endif
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_phy.c b/drivers/net/ethernet/netswift/ngbe/ngbe_phy.c
new file mode 100644
index 0000000000000..2f9013c291a11
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_phy.c
@@ -0,0 +1,1243 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+#include "ngbe_phy.h"
+
+/**
+ * ngbe_check_reset_blocked - check status of MNG FW veto bit
+ * @hw: pointer to the hardware structure
+ *
+ * This function checks the MMNGC.MNG_VETO bit to see if there are
+ * any constraints on link from manageability.  For MAC's that don't
+ * have this bit just return faluse since the link can not be blocked
+ * via this method.
+ **/
+bool ngbe_check_reset_blocked(struct ngbe_hw *hw)
+{
+	u32 mmngc;
+
+	DEBUGFUNC("ngbe_check_reset_blocked");
+
+	mmngc = rd32(hw, NGBE_MIS_ST);
+	if (mmngc & NGBE_MIS_ST_MNG_VETO) {
+		ERROR_REPORT1(NGBE_ERROR_SOFTWARE,
+			      "MNG_VETO bit detected.\n");
+		return true;
+	}
+
+	return false;
+}
+
+/* For internal phy only */
+s32 ngbe_phy_read_reg(struct ngbe_hw *hw,
+					  u32 reg_offset,
+					  u32 page,
+					  u16 *phy_data)
+{
+	/* clear input */
+	*phy_data = 0;
+
+	wr32(hw, NGBE_PHY_CONFIG(NGBE_INTERNAL_PHY_PAGE_SELECT_OFFSET),
+					page);
+
+	if (reg_offset >= NGBE_INTERNAL_PHY_OFFSET_MAX) {
+		ERROR_REPORT1(NGBE_ERROR_UNSUPPORTED,
+						"input reg offset %d exceed maximum 31.\n", reg_offset);
+		return NGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	*phy_data = 0xFFFF & rd32(hw, NGBE_PHY_CONFIG(reg_offset));
+
+	return NGBE_OK;
+}
+
+/* For internal phy only */
+s32 ngbe_phy_write_reg(struct ngbe_hw *hw,
+					   u32 reg_offset,
+					   u32 page,
+					   u16 phy_data)
+{
+
+	wr32(hw, NGBE_PHY_CONFIG(NGBE_INTERNAL_PHY_PAGE_SELECT_OFFSET),
+					page);
+
+	if (reg_offset >= NGBE_INTERNAL_PHY_OFFSET_MAX) {
+		ERROR_REPORT1(NGBE_ERROR_UNSUPPORTED,
+						"input reg offset %d exceed maximum 31.\n", reg_offset);
+		return NGBE_ERR_INVALID_ARGUMENT;
+	}
+	wr32(hw, NGBE_PHY_CONFIG(reg_offset), phy_data);
+
+	return NGBE_OK;
+}
+
+s32 ngbe_check_internal_phy_id(struct ngbe_hw *hw)
+{
+	u16 phy_id_high = 0;
+	u16 phy_id_low = 0;
+	u16 phy_id = 0;
+
+	DEBUGFUNC("ngbe_check_internal_phy_id");
+
+	ngbe_phy_read_reg(hw, NGBE_MDI_PHY_ID1_OFFSET, 0, &phy_id_high);
+	phy_id = phy_id_high << 6;
+	ngbe_phy_read_reg(hw, NGBE_MDI_PHY_ID2_OFFSET, 0, &phy_id_low);
+	phy_id |= (phy_id_low & NGBE_MDI_PHY_ID_MASK) >> 10;
+
+	if (NGBE_INTERNAL_PHY_ID != phy_id) {
+		ERROR_REPORT1(NGBE_ERROR_UNSUPPORTED,
+					"internal phy id 0x%x not supported.\n", phy_id);
+		return NGBE_ERR_DEVICE_NOT_SUPPORTED;
+	} else
+		hw->phy.id = (u32)phy_id;
+
+	return NGBE_OK;
+}
+
+/**
+ *  ngbe_read_phy_mdi - Reads a value from a specified PHY register without
+ *  the SWFW lock
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit address of PHY register to read
+ *  @phy_data: Pointer to read data from PHY register
+ **/
+s32 ngbe_phy_read_reg_mdi(struct ngbe_hw *hw,
+						  u32 reg_addr,
+						  u32 device_type,
+						  u16 *phy_data)
+{
+	u32 command;
+	s32 status = 0;
+
+	/* setup and write the address cycle command */
+	command = NGBE_MSCA_RA(reg_addr) |
+		NGBE_MSCA_PA(hw->phy.addr) |
+		NGBE_MSCA_DA(device_type);
+	wr32(hw, NGBE_MSCA, command);
+
+	command = NGBE_MSCC_CMD(NGBE_MSCA_CMD_READ) |
+			  NGBE_MSCC_BUSY |
+			  NGBE_MDIO_CLK(6);
+	wr32(hw, NGBE_MSCC, command);
+
+	/* wait to complete */
+	status = po32m(hw, NGBE_MSCC,
+		NGBE_MSCC_BUSY, ~NGBE_MSCC_BUSY,
+		NGBE_MDIO_TIMEOUT, 10);
+	if (status != 0) {
+		ERROR_REPORT1(NGBE_ERROR_POLLING,
+			      "PHY address command did not complete.\n");
+		return NGBE_ERR_PHY;
+	}
+
+	/* read data from MSCC */
+	*phy_data = 0xFFFF & rd32(hw, NGBE_MSCC);
+
+	return 0;
+}
+
+/**
+ *  ngbe_write_phy_reg_mdi - Writes a value to specified PHY register
+ *  without SWFW lock
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @device_type: 5 bit device type
+ *  @phy_data: Data to write to the PHY register
+ **/
+s32 ngbe_phy_write_reg_mdi(struct ngbe_hw *hw,
+						   u32 reg_addr,
+						   u32 device_type,
+						   u16 phy_data)
+{
+	u32 command;
+	s32 status = 0;
+
+	/* setup and write the address cycle command */
+	command = NGBE_MSCA_RA(reg_addr) |
+		NGBE_MSCA_PA(hw->phy.addr) |
+		NGBE_MSCA_DA(device_type);
+	wr32(hw, NGBE_MSCA, command);
+
+	command = phy_data | NGBE_MSCC_CMD(NGBE_MSCA_CMD_WRITE) |
+		  NGBE_MSCC_BUSY | NGBE_MDIO_CLK(6);
+	wr32(hw, NGBE_MSCC, command);
+
+	/* wait to complete */
+	status = po32m(hw, NGBE_MSCC,
+		NGBE_MSCC_BUSY, ~NGBE_MSCC_BUSY,
+		NGBE_MDIO_TIMEOUT, 10);
+	if (status != 0) {
+		ERROR_REPORT1(NGBE_ERROR_POLLING,
+			      "PHY address command did not complete.\n");
+		return NGBE_ERR_PHY;
+	}
+
+	return 0;
+}
+
+s32 ngbe_phy_read_reg_ext_yt8521s(struct ngbe_hw *hw,
+							u32 reg_addr,
+							u32 device_type,
+							u16 *phy_data)
+{
+	s32 status = 0;
+	status = ngbe_phy_write_reg_mdi(hw, 0x1e, device_type, reg_addr);
+	if (!status)
+		status = ngbe_phy_read_reg_mdi(hw, 0x1f, device_type, phy_data);
+	return status;
+}
+
+s32 ngbe_phy_write_reg_ext_yt8521s(struct ngbe_hw *hw,
+							u32 reg_addr,
+							u32 device_type,
+							u16 phy_data)
+{
+	s32 status = 0;
+	status = ngbe_phy_write_reg_mdi(hw, 0x1e, device_type, reg_addr);
+	if (!status)
+		status = ngbe_phy_write_reg_mdi(hw, 0x1f, device_type, phy_data);
+	return status;
+}
+
+s32 ngbe_phy_read_reg_sds_ext_yt8521s(struct ngbe_hw *hw,
+							u32 reg_addr,
+							u32 device_type,
+							u16 *phy_data)
+{
+	s32 status = 0;
+	status = ngbe_phy_write_reg_ext_yt8521s(hw, 0xa000, device_type, 0x02);
+	if (!status)
+		status = ngbe_phy_read_reg_ext_yt8521s(hw, reg_addr, device_type, phy_data);
+	ngbe_phy_write_reg_ext_yt8521s(hw, 0xa000, device_type, 0x00);
+	return status;
+}
+
+s32 ngbe_phy_write_reg_sds_ext_yt8521s(struct ngbe_hw *hw,
+							u32 reg_addr,
+							u32 device_type,
+							u16 phy_data)
+{
+	s32 status = 0;
+	status = ngbe_phy_write_reg_ext_yt8521s(hw, 0xa000, device_type, 0x02);
+	if (!status)
+		status = ngbe_phy_write_reg_ext_yt8521s(hw, reg_addr, device_type, phy_data);
+	ngbe_phy_write_reg_ext_yt8521s(hw, 0xa000, device_type, 0x00);
+	return status;
+}
+
+s32 ngbe_phy_read_reg_sds_mii_yt8521s(struct ngbe_hw *hw,
+							u32 reg_addr,
+							u32 device_type,
+							u16 *phy_data)
+{
+	s32 status = 0;
+	status = ngbe_phy_write_reg_ext_yt8521s(hw, 0xa000, device_type, 0x02);
+	if (!status)
+		status = ngbe_phy_read_reg_mdi(hw, reg_addr, device_type, phy_data);
+	ngbe_phy_write_reg_ext_yt8521s(hw, 0xa000, device_type, 0x00);
+	return status;
+}
+
+s32 ngbe_phy_write_reg_sds_mii_yt8521s(struct ngbe_hw *hw,
+							u32 reg_addr,
+							u32 device_type,
+							u16 phy_data)
+{
+	s32 status = 0;
+	status = ngbe_phy_write_reg_ext_yt8521s(hw, 0xa000, device_type, 0x02);
+	if (!status)
+		status = ngbe_phy_write_reg_mdi(hw, reg_addr, device_type, phy_data);
+	ngbe_phy_write_reg_ext_yt8521s(hw, 0xa000, device_type, 0x00);
+	return status;
+}
+
+s32 ngbe_check_mdi_phy_id(struct ngbe_hw *hw)
+{
+	u16 phy_id_high = 0;
+	u16 phy_id_low = 0;
+	u32 phy_id = 0;
+
+	DEBUGFUNC("ngbe_check_mdi_phy_id");
+
+	if (hw->phy.type == ngbe_phy_m88e1512) {
+		/* select page 0 */
+		ngbe_phy_write_reg_mdi(hw, 22, 0, 0);
+	} else {
+		/* select page 1 */
+		ngbe_phy_write_reg_mdi(hw, 22, 0, 1);
+	}
+
+	ngbe_phy_read_reg_mdi(hw, NGBE_MDI_PHY_ID1_OFFSET, 0, &phy_id_high);
+	phy_id = phy_id_high << 6;
+	ngbe_phy_read_reg_mdi(hw, NGBE_MDI_PHY_ID2_OFFSET, 0, &phy_id_low);
+	phy_id |= (phy_id_low & NGBE_MDI_PHY_ID_MASK) >> 10;
+
+	if (NGBE_M88E1512_PHY_ID != phy_id) {
+		ERROR_REPORT1(NGBE_ERROR_UNSUPPORTED,
+					"MDI phy id 0x%x not supported.\n", phy_id);
+		return NGBE_ERR_DEVICE_NOT_SUPPORTED;
+	} else
+		hw->phy.id = phy_id;
+
+	return NGBE_OK;
+}
+
+bool ngbe_validate_phy_addr(struct ngbe_hw *hw, u32 phy_addr)
+{
+	u16 phy_id = 0;
+	bool valid = false;
+
+	DEBUGFUNC("ngbe_validate_phy_addr");
+
+	hw->phy.addr = phy_addr;
+
+	ngbe_phy_read_reg_sds_mii_yt8521s(hw, 0x3, 0, &phy_id);
+	if (phy_id != 0xFFFF && phy_id != 0x0)
+		valid = true;
+
+	return valid;
+}
+
+s32 ngbe_check_yt_phy_id(struct ngbe_hw *hw)
+{
+	u16 phy_id = 0;
+	bool valid = false;
+	u32 phy_addr;
+	DEBUGFUNC("ngbe_check_yt_phy_id");
+
+	for (phy_addr = 0; phy_addr < 32; phy_addr++) {
+		valid = ngbe_validate_phy_addr(hw, phy_addr);
+		if (valid) {
+			hw->phy.addr = phy_addr;
+		printk("valid phy addr is 0x%x\n", phy_addr);
+			break;
+		}
+	}
+	if (!valid) {
+		printk("cannnot find valid phy address.\n");
+		return NGBE_ERR_DEVICE_NOT_SUPPORTED;
+	}
+	ngbe_phy_read_reg_sds_mii_yt8521s(hw, 0x3, 0, &phy_id);
+	if (NGBE_YT8521S_PHY_ID != phy_id) {
+		ERROR_REPORT1(NGBE_ERROR_UNSUPPORTED,
+						"MDI phy id 0x%x not supported.\n", phy_id);
+		printk("phy id is 0x%x\n", phy_id);
+		return NGBE_ERR_DEVICE_NOT_SUPPORTED;
+	} else
+		hw->phy.id = phy_id;
+	return NGBE_OK;
+}
+
+s32 ngbe_check_zte_phy_id(struct ngbe_hw *hw)
+{
+	u16 phy_id_high = 0;
+	u16 phy_id_low = 0;
+	u16 phy_id = 0;
+
+	DEBUGFUNC("ngbe_check_zte_phy_id");
+
+	ngbe_phy_read_reg_mdi(hw, NGBE_MDI_PHY_ID1_OFFSET, 0, &phy_id_high);
+	phy_id = phy_id_high << 6;
+	ngbe_phy_read_reg_mdi(hw, NGBE_MDI_PHY_ID2_OFFSET, 0, &phy_id_low);
+	phy_id |= (phy_id_low & NGBE_MDI_PHY_ID_MASK) >> 10;
+
+	if (NGBE_INTERNAL_PHY_ID != phy_id) {
+		ERROR_REPORT1(NGBE_ERROR_UNSUPPORTED,
+					"MDI phy id 0x%x not supported.\n", phy_id);
+		return NGBE_ERR_DEVICE_NOT_SUPPORTED;
+	} else
+		hw->phy.id = (u32)phy_id;
+
+	return NGBE_OK;
+}
+
+/**
+ *  ngbe_init_phy_ops - PHY/SFP specific init
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize any function pointers that were not able to be
+ *  set during init_shared_code because the PHY/SFP type was
+ *  not known.  Perform the SFP init if necessary.
+ *
+**/
+s32 ngbe_phy_init(struct ngbe_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 value = 0;
+	int i;
+
+	DEBUGFUNC("\n");
+
+	/* set fwsw semaphore mask for phy first */
+	if (!hw->phy.phy_semaphore_mask) {
+		hw->phy.phy_semaphore_mask = NGBE_MNG_SWFW_SYNC_SW_PHY;
+	}
+
+	/* init phy.addr according to HW design */
+
+	hw->phy.addr = 0;
+
+	/* Identify the PHY or SFP module */
+	ret_val = TCALL(hw, phy.ops.identify);
+	if (ret_val == NGBE_ERR_SFP_NOT_SUPPORTED)
+		return ret_val;
+
+	/* enable interrupts, only link status change and an done is allowed */
+	if (hw->phy.type == ngbe_phy_internal) {
+		value = NGBE_INTPHY_INT_LSC | NGBE_INTPHY_INT_ANC;
+		TCALL(hw, phy.ops.write_reg, 0x12, 0xa42, value);
+	} else if (hw->phy.type == ngbe_phy_m88e1512 ||
+				hw->phy.type == ngbe_phy_m88e1512_sfi) {
+		TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 2);
+		TCALL(hw, phy.ops.read_reg_mdi, 21, 0, &value);
+		value &= ~NGBE_M88E1512_RGM_TTC;
+		value |= NGBE_M88E1512_RGM_RTC;
+		TCALL(hw, phy.ops.write_reg_mdi, 21, 0, value);
+		if (hw->phy.type == ngbe_phy_m88e1512)
+			TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 0);
+		else
+			TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 1);
+
+		TCALL(hw, phy.ops.write_reg_mdi, 0, 0, NGBE_MDI_PHY_RESET);
+		for (i = 0; i < 15; i++) {
+			TCALL(hw, phy.ops.read_reg_mdi, 0, 0, &value);
+			if (value & NGBE_MDI_PHY_RESET)
+				msleep(1);
+			else
+				break;
+		}
+
+		if (i == 15) {
+			ERROR_REPORT1(NGBE_ERROR_POLLING,
+					"phy reset exceeds maximum waiting period.\n");
+			return NGBE_ERR_PHY_TIMEOUT;
+		}
+
+		ret_val = TCALL(hw, phy.ops.reset);
+		if (ret_val) {
+			return ret_val;
+		}
+
+		/* set LED2 to interrupt output and INTn active low */
+		TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 3);
+		TCALL(hw, phy.ops.read_reg_mdi, 18, 0, &value);
+		value |= NGBE_M88E1512_INT_EN;
+		value &= ~(NGBE_M88E1512_INT_POL);
+		TCALL(hw, phy.ops.write_reg_mdi, 18, 0, value);
+
+		if (hw->phy.type == ngbe_phy_m88e1512_sfi) {
+			TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 1);
+			TCALL(hw, phy.ops.read_reg_mdi, 16, 0, &value);
+			value &= ~0x4;
+			TCALL(hw, phy.ops.write_reg_mdi, 16, 0, value);
+		}
+
+		/* enable link status change and AN complete interrupts */
+		value = NGBE_M88E1512_INT_ANC | NGBE_M88E1512_INT_LSC;
+		if (hw->phy.type == ngbe_phy_m88e1512)
+			TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 0);
+		else
+			TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 1);
+		TCALL(hw, phy.ops.write_reg_mdi, 18, 0, value);
+
+		/* LED control */
+		TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 3);
+		TCALL(hw, phy.ops.read_reg_mdi, 16, 0, &value);
+		value &= ~0x00FF;
+		value |= (NGBE_M88E1512_LED1_CONF << 4) | NGBE_M88E1512_LED0_CONF;
+		TCALL(hw, phy.ops.write_reg_mdi, 16, 0, value);
+		TCALL(hw, phy.ops.read_reg_mdi, 17, 0, &value);
+		value &= ~0x000F;
+
+		TCALL(hw, phy.ops.write_reg_mdi, 17, 0, value);
+	} else if (hw->phy.type == ngbe_phy_yt8521s_sfi) {
+
+	/*enable yt8521s interrupt*/
+	#if 1
+		/* select sds area register */
+		ngbe_phy_write_reg_ext_yt8521s(hw, 0xa000, 0, 0x00);
+
+		/* enable interrupt */
+		value = 0x000C;
+		TCALL(hw, phy.ops.write_reg_mdi, 0x12, 0, value);
+	#endif
+
+		/* select fiber_to_rgmii first */
+		ngbe_phy_read_reg_ext_yt8521s(hw, 0xa006, 0, &value);
+		value &= ~0x100;
+		ngbe_phy_write_reg_ext_yt8521s(hw, 0xa006, 0, value);
+
+		ngbe_phy_read_reg_sds_mii_yt8521s(hw, 0x0, 0, &value);
+		value |= 0x800;
+		ngbe_phy_write_reg_sds_mii_yt8521s(hw, 0x0, 0, value);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ngbe_identify_module - Identifies module type
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines HW type and calls appropriate function.
+ **/
+s32 ngbe_phy_identify(struct ngbe_hw *hw)
+{
+	s32 status = 0;
+
+	DEBUGFUNC("ngbe_phy_identify");
+
+	switch (hw->phy.type) {
+	case ngbe_phy_internal:
+		status = ngbe_check_internal_phy_id(hw);
+		break;
+	case ngbe_phy_m88e1512:
+	case ngbe_phy_m88e1512_sfi:
+		status = ngbe_check_mdi_phy_id(hw);
+		break;
+	case ngbe_phy_zte:
+		status = ngbe_check_zte_phy_id(hw);
+		break;
+	case ngbe_phy_yt8521s_sfi:
+		status = ngbe_check_yt_phy_id(hw);
+		break;
+	default:
+		status = NGBE_ERR_PHY_TYPE;
+	}
+
+	return status;
+}
+
+s32 ngbe_phy_reset(struct ngbe_hw *hw)
+{
+	s32 status = 0;
+
+	u16 value = 0;
+	int i;
+
+	DEBUGFUNC("ngbe_phy_reset");
+
+	/* only support internal phy */
+	if (hw->phy.type != ngbe_phy_internal)
+		return NGBE_ERR_PHY_TYPE;
+
+	/* Don't reset PHY if it's shut down due to overtemp. */
+	if (!hw->phy.reset_if_overtemp &&
+		(NGBE_ERR_OVERTEMP == TCALL(hw, phy.ops.check_overtemp))) {
+		ERROR_REPORT1(NGBE_ERROR_CAUTION,
+						"OVERTEMP! Skip PHY reset.\n");
+		return NGBE_ERR_OVERTEMP;
+	}
+
+	/* Blocked by MNG FW so bail */
+	if (ngbe_check_reset_blocked(hw))
+		return status;
+
+	value |= NGBE_MDI_PHY_RESET;
+	status = TCALL(hw, phy.ops.write_reg, 0, 0, value);
+	for (i = 0; i < NGBE_PHY_RST_WAIT_PERIOD; i++) {
+		status = TCALL(hw, phy.ops.read_reg, 0, 0, &value);
+		if (!(value & NGBE_MDI_PHY_RESET))
+			break;
+		msleep(1);
+	}
+
+	if (i == NGBE_PHY_RST_WAIT_PERIOD) {
+		ERROR_REPORT1(NGBE_ERROR_POLLING,
+						"PHY MODE RESET did not complete.\n");
+		return NGBE_ERR_RESET_FAILED;
+	}
+
+	return status;
+}
+
+u32 ngbe_phy_setup_link(struct ngbe_hw *hw,
+						u32 speed,
+						bool need_restart_AN)
+{
+	u16 value = 0;
+
+	DEBUGFUNC("ngbe_phy_setup_link");
+
+	/* disable 10/100M Half Duplex */
+	TCALL(hw, phy.ops.read_reg, 4, 0, &value);
+	value &= 0xFF5F;
+	TCALL(hw, phy.ops.write_reg, 4, 0, value);
+
+	/* set advertise enable according to input speed */
+	if (!(speed & NGBE_LINK_SPEED_1GB_FULL)) {
+		TCALL(hw, phy.ops.read_reg, 9, 0, &value);
+		value &= 0xFDFF;
+		TCALL(hw, phy.ops.write_reg, 9, 0, value);
+	} else {
+		TCALL(hw, phy.ops.read_reg, 9, 0, &value);
+		value |= 0x200;
+		TCALL(hw, phy.ops.write_reg, 9, 0, value);
+	}
+
+	if (!(speed & NGBE_LINK_SPEED_100_FULL)) {
+		TCALL(hw, phy.ops.read_reg, 4, 0, &value);
+		value &= 0xFEFF;
+		TCALL(hw, phy.ops.write_reg, 4, 0, value);
+	} else {
+		TCALL(hw, phy.ops.read_reg, 4, 0, &value);
+		value |= 0x100;
+		TCALL(hw, phy.ops.write_reg, 4, 0, value);
+	}
+
+	if (!(speed & NGBE_LINK_SPEED_10_FULL)) {
+		TCALL(hw, phy.ops.read_reg, 4, 0, &value);
+		value &= 0xFFBF;
+		TCALL(hw, phy.ops.write_reg, 4, 0, value);
+	} else {
+		TCALL(hw, phy.ops.read_reg, 4, 0, &value);
+		value |= 0x40;
+		TCALL(hw, phy.ops.write_reg, 4, 0, value);
+	}
+
+	/* restart AN and wait AN done interrupt */
+	if (((hw->subsystem_device_id & NCSI_SUP_MASK) == NCSI_SUP) ||
+		((hw->subsystem_device_id & OEM_MASK) == OCP_CARD)) {
+	if (need_restart_AN)
+		value = NGBE_MDI_PHY_RESTART_AN | NGBE_MDI_PHY_ANE;
+	else
+		value = NGBE_MDI_PHY_ANE;
+	} else {
+		value = NGBE_MDI_PHY_RESTART_AN | NGBE_MDI_PHY_ANE;
+	}
+	TCALL(hw, phy.ops.write_reg, 0, 0, value);
+
+	value = 0x205B;
+	TCALL(hw, phy.ops.write_reg, 16, 0xd04, value);
+	TCALL(hw, phy.ops.write_reg, 17, 0xd04, 0);
+
+	TCALL(hw, phy.ops.read_reg, 18, 0xd04, &value);
+
+	value = value & 0xFF8C;
+	/*act led blinking mode set to 60ms*/
+	value |= 0x2;
+	TCALL(hw, phy.ops.write_reg, 18, 0xd04, value);
+
+	TCALL(hw, phy.ops.check_event);
+
+	return NGBE_OK;
+}
+
+s32 ngbe_phy_reset_m88e1512(struct ngbe_hw *hw)
+{
+	s32 status = 0;
+
+	u16 value = 0;
+	int i;
+
+	DEBUGFUNC("ngbe_phy_reset_m88e1512");
+
+	if (hw->phy.type != ngbe_phy_m88e1512 &&
+		hw->phy.type != ngbe_phy_m88e1512_sfi)
+		return NGBE_ERR_PHY_TYPE;
+
+	/* Don't reset PHY if it's shut down due to overtemp. */
+	if (!hw->phy.reset_if_overtemp &&
+		(NGBE_ERR_OVERTEMP == TCALL(hw, phy.ops.check_overtemp))) {
+		ERROR_REPORT1(NGBE_ERROR_CAUTION,
+						"OVERTEMP! Skip PHY reset.\n");
+		return NGBE_ERR_OVERTEMP;
+	}
+
+	/* Blocked by MNG FW so bail */
+	if (ngbe_check_reset_blocked(hw))
+		return status;
+
+	/* select page 18 reg 20 */
+	status = TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 18);
+
+	if (hw->phy.type == ngbe_phy_m88e1512)
+		/* mode select to RGMII-to-copper */
+		value = 0;
+	else
+		/* mode select to RGMII-to-sfi */
+		value = 2;
+	status = TCALL(hw, phy.ops.write_reg_mdi, 20, 0, value);
+	/* mode reset */
+	value |= NGBE_MDI_PHY_RESET;
+	status = TCALL(hw, phy.ops.write_reg_mdi, 20, 0, value);
+
+	for (i = 0; i < NGBE_PHY_RST_WAIT_PERIOD; i++) {
+		status = TCALL(hw, phy.ops.read_reg_mdi, 20, 0, &value);
+		if (!(value & NGBE_MDI_PHY_RESET))
+			break;
+		msleep(1);
+	}
+
+	if (i == NGBE_PHY_RST_WAIT_PERIOD) {
+		ERROR_REPORT1(NGBE_ERROR_POLLING,
+						"M88E1512 MODE RESET did not complete.\n");
+		return NGBE_ERR_RESET_FAILED;
+	}
+
+	return status;
+}
+
+s32 ngbe_phy_reset_yt8521s(struct ngbe_hw *hw)
+{
+	s32 status = 0;
+
+	u16 value = 0;
+	int i;
+
+	DEBUGFUNC("ngbe_phy_reset_yt8521s");
+
+	if (hw->phy.type != ngbe_phy_yt8521s_sfi)
+		return NGBE_ERR_PHY_TYPE;
+
+	/* Don't reset PHY if it's shut down due to overtemp. */
+	if (!hw->phy.reset_if_overtemp &&
+		(NGBE_ERR_OVERTEMP == TCALL(hw, phy.ops.check_overtemp))) {
+		ERROR_REPORT1(NGBE_ERROR_CAUTION,
+						"OVERTEMP! Skip PHY reset.\n");
+		return NGBE_ERR_OVERTEMP;
+	}
+
+	/* Blocked by MNG FW so bail */
+	if (ngbe_check_reset_blocked(hw))
+		return status;
+
+	status = ngbe_phy_read_reg_sds_mii_yt8521s(hw, 0, 0, &value);
+	/* sds software reset */
+	value |= 0x8000;
+	status = ngbe_phy_write_reg_sds_mii_yt8521s(hw, 0, 0, value);
+
+	for (i = 0; i < NGBE_PHY_RST_WAIT_PERIOD; i++) {
+		status = ngbe_phy_read_reg_sds_mii_yt8521s(hw, 0, 0, &value);
+		if (!(value & 0x8000))
+			break;
+		msleep(1);
+	}
+
+	if (i == NGBE_PHY_RST_WAIT_PERIOD) {
+		ERROR_REPORT1(NGBE_ERROR_POLLING,
+						"YT8521S Software RESET did not complete.\n");
+		return NGBE_ERR_RESET_FAILED;
+	}
+
+	return status;
+}
+
+u32 ngbe_phy_setup_link_m88e1512(struct ngbe_hw *hw,
+								 u32 speed,
+								 bool autoneg_wait_to_complete)
+{
+	u16 value_r4 = 0;
+	u16 value_r9 = 0;
+	u16 value;
+
+	DEBUGFUNC("\n");
+	UNREFERENCED_PARAMETER(autoneg_wait_to_complete);
+
+	hw->phy.autoneg_advertised = 0;
+	if (hw->phy.type == ngbe_phy_m88e1512) {
+		if (speed & NGBE_LINK_SPEED_1GB_FULL) {
+			value_r9 |= NGBE_M88E1512_1000BASET_FULL;
+			hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_1GB_FULL;
+		}
+
+		if (speed & NGBE_LINK_SPEED_100_FULL) {
+			value_r4 |= NGBE_M88E1512_100BASET_FULL;
+			hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_100_FULL;
+		}
+
+		if (speed & NGBE_LINK_SPEED_10_FULL) {
+			value_r4 |= NGBE_M88E1512_10BASET_FULL;
+			hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_10_FULL;
+		}
+
+		TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 0);
+		TCALL(hw, phy.ops.read_reg_mdi, 4, 0, &value);
+		value &= ~(NGBE_M88E1512_100BASET_FULL |
+				   NGBE_M88E1512_100BASET_HALF |
+				   NGBE_M88E1512_10BASET_FULL |
+				   NGBE_M88E1512_10BASET_HALF);
+		value_r4 |= value;
+		TCALL(hw, phy.ops.write_reg_mdi, 4, 0, value_r4);
+
+		TCALL(hw, phy.ops.read_reg_mdi, 9, 0, &value);
+		value &= ~(NGBE_M88E1512_1000BASET_FULL |
+				   NGBE_M88E1512_1000BASET_HALF);
+		value_r9 |= value;
+		TCALL(hw, phy.ops.write_reg_mdi, 9, 0, value_r9);
+
+		value = NGBE_MDI_PHY_RESTART_AN | NGBE_MDI_PHY_ANE;
+		TCALL(hw, phy.ops.write_reg_mdi, 0, 0, value);
+	} else {
+		hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_1GB_FULL;
+		TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 1);
+		TCALL(hw, phy.ops.read_reg_mdi, 4, 0, &value);
+		value &= ~0x60;
+		value |= 0x20;
+		TCALL(hw, phy.ops.write_reg_mdi, 4, 0, value);
+
+		value = NGBE_MDI_PHY_RESTART_AN | NGBE_MDI_PHY_ANE;
+		TCALL(hw, phy.ops.write_reg_mdi, 0, 0, value);
+	}
+
+	TCALL(hw, phy.ops.check_event);
+
+	return NGBE_OK;
+}
+
+u32 ngbe_phy_setup_link_yt8521s(struct ngbe_hw *hw,
+								u32 speed,
+								bool autoneg_wait_to_complete)
+{
+	s32 ret_val = 0;
+	u16 value;
+	u16 value_r4 = 0;
+	u16 value_r9 = 0;
+
+	DEBUGFUNC("\n");
+	UNREFERENCED_PARAMETER(autoneg_wait_to_complete);
+	UNREFERENCED_PARAMETER(speed);
+
+	hw->phy.autoneg_advertised = 0;
+
+	if (hw->phy.type == ngbe_phy_yt8521s) {
+		value_r4 = 0x140;
+		value_r9 = 0x200;
+		/*disable 100/10base-T Self-negotiation ability*/
+		ngbe_phy_read_reg_mdi(hw, 0x4, 0, &value);
+		value &= ~value_r4;
+		ngbe_phy_write_reg_mdi(hw, 0x4, 0, value);
+
+		/*disable 1000base-T Self-negotiation ability*/
+		ngbe_phy_read_reg_mdi(hw, 0x9, 0, &value);
+		value &= ~value_r9;
+		ngbe_phy_write_reg_mdi(hw, 0x9, 0, value);
+
+		value_r4 = 0x0;
+		value_r9 = 0x0;
+
+		if (speed & NGBE_LINK_SPEED_1GB_FULL) {
+			hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_1GB_FULL;
+			value_r9 |= 0x200;
+		}
+		if (speed & NGBE_LINK_SPEED_100_FULL) {
+			hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_100_FULL;
+			value_r4 |= 0x100;
+		}
+		if (speed & NGBE_LINK_SPEED_10_FULL) {
+			hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_10_FULL;
+			value_r4 |= 0x40;
+		}
+
+		/* enable 1000base-T Self-negotiation ability */
+		ngbe_phy_read_reg_mdi(hw, 0x9, 0, &value);
+		value |= value_r9;
+		ngbe_phy_write_reg_mdi(hw, 0x9, 0, value);
+
+		/* enable 100/10base-T Self-negotiation ability */
+		ngbe_phy_read_reg_mdi(hw, 0x4, 0, &value);
+		value |= value_r4;
+		ngbe_phy_write_reg_mdi(hw, 0x4, 0, value);
+
+		/* software reset to make the above configuration take effect*/
+		ngbe_phy_read_reg_mdi(hw, 0x0, 0, &value);
+		value |= 0x8000;
+		ngbe_phy_write_reg_mdi(hw, 0x0, 0, value);
+	} else {
+		hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_1GB_FULL;
+
+		/* RGMII_Config1 : Config rx and tx training delay */
+		ngbe_phy_write_reg_ext_yt8521s(hw, 0xA003, 0, 0x3cf1);
+		ngbe_phy_write_reg_ext_yt8521s(hw, 0xA001, 0, 0x8041);
+
+		/* software reset */
+		ngbe_phy_write_reg_sds_ext_yt8521s(hw, 0x0, 0, 0x9140);
+
+		/* power on phy */
+		ngbe_phy_read_reg_sds_mii_yt8521s(hw, 0x0, 0, &value);
+		value &= ~0x800;
+		ngbe_phy_write_reg_sds_mii_yt8521s(hw, 0x0, 0, value);
+	}
+
+	TCALL(hw, phy.ops.check_event);
+
+	return ret_val;
+}
+
+s32 ngbe_phy_reset_zte(struct ngbe_hw *hw)
+{
+	s32 status = 0;
+	u16 value = 0;
+	int i;
+
+	DEBUGFUNC("ngbe_phy_reset_zte");
+
+	if (hw->phy.type != ngbe_phy_zte)
+		return NGBE_ERR_PHY_TYPE;
+
+	/* Don't reset PHY if it's shut down due to overtemp. */
+	if (!hw->phy.reset_if_overtemp &&
+		(NGBE_ERR_OVERTEMP == TCALL(hw, phy.ops.check_overtemp))) {
+		ERROR_REPORT1(NGBE_ERROR_CAUTION,
+						"OVERTEMP! Skip PHY reset.\n");
+		return NGBE_ERR_OVERTEMP;
+	}
+
+	/* Blocked by MNG FW so bail */
+	if (ngbe_check_reset_blocked(hw))
+		return status;
+
+	/* zte phy */
+	/* set control register[0x0] to reset mode */
+	value = 1;
+	/* mode reset */
+	value |= NGBE_MDI_PHY_RESET;
+	status = TCALL(hw, phy.ops.write_reg_mdi, 0, 0, value);
+
+	for (i = 0; i < NGBE_PHY_RST_WAIT_PERIOD; i++) {
+		status = TCALL(hw, phy.ops.read_reg_mdi, 0, 0, &value);
+		if (!(value & NGBE_MDI_PHY_RESET))
+			break;
+		msleep(1);
+	}
+
+	if (i == NGBE_PHY_RST_WAIT_PERIOD) {
+		ERROR_REPORT1(NGBE_ERROR_POLLING,
+						"ZTE MODE RESET did not complete.\n");
+		return NGBE_ERR_RESET_FAILED;
+	}
+
+	return status;
+}
+
+u32 ngbe_phy_setup_link_zte(struct ngbe_hw *hw,
+							u32 speed,
+							bool autoneg_wait_to_complete)
+{
+	u16 ngbe_phy_ccr = 0;
+
+	DEBUGFUNC("\n");
+	UNREFERENCED_PARAMETER(autoneg_wait_to_complete);
+	/*
+	 * Clear autoneg_advertised and set new values based on input link
+	 * speed.
+	 */
+	hw->phy.autoneg_advertised = 0;
+	TCALL(hw, phy.ops.read_reg_mdi, 0, 0, &ngbe_phy_ccr);
+
+	if (speed & NGBE_LINK_SPEED_1GB_FULL) {
+		hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_1GB_FULL;
+		ngbe_phy_ccr |= NGBE_MDI_PHY_SPEED_SELECT1;/*bit 6*/
+	} else if (speed & NGBE_LINK_SPEED_100_FULL) {
+		hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_100_FULL;
+		ngbe_phy_ccr |= NGBE_MDI_PHY_SPEED_SELECT0;/*bit 13*/
+	} else if (speed & NGBE_LINK_SPEED_10_FULL)
+		hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_10_FULL;
+	else
+		return NGBE_LINK_SPEED_UNKNOWN;
+
+	ngbe_phy_ccr |= NGBE_MDI_PHY_DUPLEX;/*restart autonegotiation*/
+	TCALL(hw, phy.ops.write_reg_mdi, 0, 0, ngbe_phy_ccr);
+
+	return speed;
+}
+
+/**
+ *  ngbe_tn_check_overtemp - Checks if an overtemp occurred.
+ *  @hw: pointer to hardware structure
+ *
+ *  Checks if the LASI temp alarm status was triggered due to overtemp
+ **/
+s32 ngbe_phy_check_overtemp(struct ngbe_hw *hw)
+{
+	s32 status = 0;
+	u32 ts_state;
+
+	DEBUGFUNC("ngbe_phy_check_overtemp");
+
+	/* Check that the LASI temp alarm status was triggered */
+	ts_state = rd32(hw, NGBE_TS_ALARM_ST);
+
+	if (ts_state & NGBE_TS_ALARM_ST_DALARM)
+		status = NGBE_ERR_UNDERTEMP;
+	else if (ts_state & NGBE_TS_ALARM_ST_ALARM)
+		status = NGBE_ERR_OVERTEMP;
+
+	return status;
+}
+
+s32 ngbe_phy_check_event(struct ngbe_hw *hw)
+{
+	u16 value = 0;
+	struct ngbe_adapter *adapter = hw->back;
+
+	TCALL(hw, phy.ops.read_reg, 0x1d, 0xa43, &value);
+	adapter->flags |= NGBE_FLAG_NEED_LINK_UPDATE;
+	if (value & 0x10) {
+		adapter->flags |= NGBE_FLAG_NEED_LINK_UPDATE;
+	} else if (value & 0x08) {
+		adapter->flags |= NGBE_FLAG_NEED_ANC_CHECK;
+	}
+
+	return NGBE_OK;
+}
+
+s32 ngbe_phy_check_event_m88e1512(struct ngbe_hw *hw)
+{
+	u16 value = 0;
+	struct ngbe_adapter *adapter = hw->back;
+
+	if (hw->phy.type == ngbe_phy_m88e1512)
+		TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 0);
+	else
+		TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 1);
+	TCALL(hw, phy.ops.read_reg_mdi, 19, 0, &value);
+
+	if (value & NGBE_M88E1512_LSC) {
+		adapter->flags |= NGBE_FLAG_NEED_LINK_UPDATE;
+	}
+
+	if (value & NGBE_M88E1512_ANC) {
+		adapter->flags |= NGBE_FLAG_NEED_ANC_CHECK;
+	}
+
+	return NGBE_OK;
+}
+
+s32 ngbe_phy_check_event_yt8521s(struct ngbe_hw *hw)
+{
+	u16 value = 0;
+	struct ngbe_adapter *adapter = hw->back;
+
+	ngbe_phy_write_reg_ext_yt8521s(hw, 0xa000, 0, 0x0);
+	TCALL(hw, phy.ops.read_reg_mdi, 0x13, 0, &value);
+
+	if (value & (NGBE_YT8521S_SDS_LINK_UP | NGBE_YT8521S_SDS_LINK_DOWN)) {
+		adapter->flags |= NGBE_FLAG_NEED_LINK_UPDATE;
+	}
+
+	return NGBE_OK;
+}
+
+s32 ngbe_phy_get_advertised_pause(struct ngbe_hw *hw, u8 *pause_bit)
+{
+	u16 value;
+	s32 status = 0;
+
+	status = TCALL(hw, phy.ops.read_reg, 4, 0, &value);
+	*pause_bit = (u8)((value >> 10) & 0x3);
+	return status;
+}
+
+s32 ngbe_phy_get_advertised_pause_m88e1512(struct ngbe_hw *hw, u8 *pause_bit)
+{
+	u16 value;
+	s32 status = 0;
+
+	if (hw->phy.type == ngbe_phy_m88e1512) {
+		status = TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 0);
+		status = TCALL(hw, phy.ops.read_reg_mdi, 4, 0, &value);
+		*pause_bit = (u8)((value >> 10) & 0x3);
+	} else {
+		status = TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 1);
+		status = TCALL(hw, phy.ops.read_reg_mdi, 4, 0, &value);
+		*pause_bit = (u8)((value >> 7) & 0x3);
+	}
+	return status;
+}
+
+s32 ngbe_phy_get_advertised_pause_yt8521s(struct ngbe_hw *hw, u8 *pause_bit)
+{
+	u16 value;
+	s32 status = 0;
+
+	status = ngbe_phy_read_reg_sds_mii_yt8521s(hw, 0x04, 0, &value);
+	*pause_bit = (u8)((value >> 7) & 0x3);
+	return status;
+}
+
+s32 ngbe_phy_get_lp_advertised_pause(struct ngbe_hw *hw, u8 *pause_bit)
+{
+	u16 value;
+	s32 status = 0;
+
+	status = TCALL(hw, phy.ops.read_reg, 0x1d, 0xa43, &value);
+
+	status = TCALL(hw, phy.ops.read_reg, 0x1, 0, &value);
+	value = (value >> 5) & 0x1;
+
+	/* if AN complete then check lp adv pause */
+	status = TCALL(hw, phy.ops.read_reg, 5, 0, &value);
+	*pause_bit = (u8)((value >> 10) & 0x3);
+	return status;
+}
+
+s32 ngbe_phy_get_lp_advertised_pause_m88e1512(struct ngbe_hw *hw,
+												u8 *pause_bit)
+{
+	u16 value;
+	s32 status = 0;
+
+	if (hw->phy.type == ngbe_phy_m88e1512) {
+		status = TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 0);
+		status = TCALL(hw, phy.ops.read_reg_mdi, 5, 0, &value);
+		*pause_bit = (u8)((value >> 10) & 0x3);
+	} else {
+		status = TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 1);
+		status = TCALL(hw, phy.ops.read_reg_mdi, 5, 0, &value);
+		*pause_bit = (u8)((value >> 7) & 0x3);
+	}
+	return status;
+}
+
+s32 ngbe_phy_get_lp_advertised_pause_yt8521s(struct ngbe_hw *hw,
+												u8 *pause_bit)
+{
+	u16 value;
+	s32 status = 0;
+
+	status = ngbe_phy_read_reg_sds_mii_yt8521s(hw, 0x05, 0, &value);
+	*pause_bit = (u8)((value >> 7) & 0x3);
+	return status;
+}
+
+s32 ngbe_phy_set_pause_advertisement(struct ngbe_hw *hw, u16 pause_bit)
+{
+	u16 value;
+	s32 status = 0;
+
+	status = TCALL(hw, phy.ops.read_reg, 4, 0, &value);
+	value &= ~0xC00;
+	value |= pause_bit;
+	status = TCALL(hw, phy.ops.write_reg, 4, 0, value);
+	return status;
+}
+
+s32 ngbe_phy_set_pause_advertisement_m88e1512(struct ngbe_hw *hw,
+												u16 pause_bit)
+{
+	u16 value;
+	s32 status = 0;
+	if (hw->phy.type == ngbe_phy_m88e1512) {
+		status = TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 0);
+		status = TCALL(hw, phy.ops.read_reg_mdi, 4, 0, &value);
+		value &= ~0xC00;
+		value |= pause_bit;
+		status = TCALL(hw, phy.ops.write_reg_mdi, 4, 0, value);
+	} else {
+		status = TCALL(hw, phy.ops.write_reg_mdi, 22, 0, 1);
+		status = TCALL(hw, phy.ops.read_reg_mdi, 4, 0, &value);
+		value &= ~0x180;
+		value |= pause_bit;
+		status = TCALL(hw, phy.ops.write_reg_mdi, 4, 0, value);
+	}
+
+	return status;
+}
+
+s32 ngbe_phy_set_pause_advertisement_yt8521s(struct ngbe_hw *hw,
+												u16 pause_bit)
+{
+	u16 value;
+	s32 status = 0;
+
+	status = ngbe_phy_read_reg_sds_mii_yt8521s(hw, 0x04, 0, &value);
+	value &= ~0x180;
+	value |= pause_bit;
+	status = ngbe_phy_write_reg_sds_mii_yt8521s(hw, 0x04, 0, value);
+
+	return status;
+}
+
+s32 ngbe_phy_setup(struct ngbe_hw *hw)
+{
+	int i;
+	u16 value = 0;
+
+	for (i = 0; i < 15; i++) {
+		if (!rd32m(hw, NGBE_MIS_ST, NGBE_MIS_ST_GPHY_IN_RST(hw->bus.lan_id))) {
+			break;
+		}
+		msleep(1);
+	}
+
+	if (i == 15) {
+		ERROR_REPORT1(NGBE_ERROR_POLLING,
+						"GPhy reset exceeds maximum times.\n");
+		return NGBE_ERR_PHY_TIMEOUT;
+	}
+
+	for (i = 0; i < 1000; i++) {
+		TCALL(hw, phy.ops.read_reg, 29, 0xa43, &value);
+		if (value & 0x20)
+			break;
+	}
+
+	TCALL(hw, phy.ops.write_reg, 20, 0xa46, 1);
+	for (i = 0; i < 1000; i++) {
+		TCALL(hw, phy.ops.read_reg, 29, 0xa43, &value);
+		if (value & 0x20)
+			break;
+	}
+	if (i == 1000) {
+		return NGBE_ERR_PHY_TIMEOUT;
+	}
+
+	TCALL(hw, phy.ops.write_reg, 20, 0xa46, 2);
+	for (i = 0; i < 1000; i++) {
+		TCALL(hw, phy.ops.read_reg, 29, 0xa43, &value);
+		if (value & 0x20)
+			break;
+	}
+
+	if (i == 1000) {
+		return NGBE_ERR_PHY_TIMEOUT;
+	}
+
+	for (i = 0; i < 1000; i++) {
+		TCALL(hw, phy.ops.read_reg, 16, 0xa42, &value);
+		if ((value & 0x7) == 3)
+			break;
+	}
+
+	if (i == 1000) {
+		return NGBE_ERR_PHY_TIMEOUT;
+	}
+
+	return NGBE_OK;
+}
+
+s32 ngbe_init_phy_ops_common(struct ngbe_hw *hw)
+{
+	struct ngbe_phy_info *phy = &hw->phy;
+
+	phy->ops.reset = ngbe_phy_reset;
+	phy->ops.read_reg = ngbe_phy_read_reg;
+	phy->ops.write_reg = ngbe_phy_write_reg;
+	phy->ops.setup_link = ngbe_phy_setup_link;
+	phy->ops.check_overtemp = ngbe_phy_check_overtemp;
+	phy->ops.identify = ngbe_phy_identify;
+	phy->ops.init = ngbe_phy_init;
+	phy->ops.check_event = ngbe_phy_check_event;
+	phy->ops.get_adv_pause = ngbe_phy_get_advertised_pause;
+	phy->ops.get_lp_adv_pause = ngbe_phy_get_lp_advertised_pause;
+	phy->ops.set_adv_pause = ngbe_phy_set_pause_advertisement;
+	phy->ops.setup_once = ngbe_phy_setup;
+
+	return NGBE_OK;
+}
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_phy.h b/drivers/net/ethernet/netswift/ngbe/ngbe_phy.h
new file mode 100644
index 0000000000000..c6568018b20c7
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_phy.h
@@ -0,0 +1,201 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#ifndef _NGBE_PHY_H_
+#define _NGBE_PHY_H_
+
+#include "ngbe_type.h"
+#include "ngbe.h"
+
+/* EEPROM byte offsets */
+#define NGBE_SFF_IDENTIFIER            0x0
+#define NGBE_SFF_IDENTIFIER_SFP        0x3
+#define NGBE_SFF_VENDOR_OUI_BYTE0      0x25
+#define NGBE_SFF_VENDOR_OUI_BYTE1      0x26
+#define NGBE_SFF_VENDOR_OUI_BYTE2      0x27
+#define NGBE_SFF_1GBE_COMP_CODES       0x6
+#define NGBE_SFF_10GBE_COMP_CODES      0x3
+#define NGBE_SFF_CABLE_TECHNOLOGY      0x8
+#define NGBE_SFF_CABLE_SPEC_COMP       0x3C
+#define NGBE_SFF_SFF_8472_SWAP         0x5C
+#define NGBE_SFF_SFF_8472_COMP         0x5E
+#define NGBE_SFF_SFF_8472_OSCB         0x6E
+#define NGBE_SFF_SFF_8472_ESCB         0x76
+#define NGBE_SFF_IDENTIFIER_QSFP_PLUS  0xD
+#define NGBE_SFF_QSFP_VENDOR_OUI_BYTE0 0xA5
+#define NGBE_SFF_QSFP_VENDOR_OUI_BYTE1 0xA6
+#define NGBE_SFF_QSFP_VENDOR_OUI_BYTE2 0xA7
+#define NGBE_SFF_QSFP_CONNECTOR        0x82
+#define NGBE_SFF_QSFP_10GBE_COMP       0x83
+#define NGBE_SFF_QSFP_1GBE_COMP        0x86
+#define NGBE_SFF_QSFP_CABLE_LENGTH     0x92
+#define NGBE_SFF_QSFP_DEVICE_TECH      0x93
+
+/* Bitmasks */
+#define NGBE_SFF_DA_PASSIVE_CABLE      0x4
+#define NGBE_SFF_DA_ACTIVE_CABLE       0x8
+#define NGBE_SFF_DA_SPEC_ACTIVE_LIMITING       0x4
+#define NGBE_SFF_1GBASESX_CAPABLE      0x1
+#define NGBE_SFF_1GBASELX_CAPABLE      0x2
+#define NGBE_SFF_1GBASET_CAPABLE       0x8
+#define NGBE_SFF_10GBASESR_CAPABLE     0x10
+#define NGBE_SFF_10GBASELR_CAPABLE     0x20
+#define NGBE_SFF_SOFT_RS_SELECT_MASK   0x8
+#define NGBE_SFF_SOFT_RS_SELECT_10G    0x8
+#define NGBE_SFF_SOFT_RS_SELECT_1G     0x0
+#define NGBE_SFF_ADDRESSING_MODE       0x4
+#define NGBE_SFF_QSFP_DA_ACTIVE_CABLE  0x1
+#define NGBE_SFF_QSFP_DA_PASSIVE_CABLE 0x8
+#define NGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE  0x23
+#define NGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL   0x0
+#define NGBE_I2C_EEPROM_READ_MASK      0x100
+#define NGBE_I2C_EEPROM_STATUS_MASK    0x3
+#define NGBE_I2C_EEPROM_STATUS_NO_OPERATION    0x0
+#define NGBE_I2C_EEPROM_STATUS_PASS    0x1
+#define NGBE_I2C_EEPROM_STATUS_FAIL    0x2
+#define NGBE_I2C_EEPROM_STATUS_IN_PROGRESS     0x3
+
+#define NGBE_CS4227                    0xBE    /* CS4227 address */
+#define NGBE_CS4227_GLOBAL_ID_LSB      0
+#define NGBE_CS4227_SCRATCH            2
+#define NGBE_CS4227_GLOBAL_ID_VALUE    0x03E5
+#define NGBE_CS4227_SCRATCH_VALUE      0x5aa5
+#define NGBE_CS4227_RETRIES            5
+#define NGBE_CS4227_LINE_SPARE22_MSB   0x12AD  /* Reg to program speed */
+#define NGBE_CS4227_LINE_SPARE24_LSB   0x12B0  /* Reg to program EDC */
+#define NGBE_CS4227_HOST_SPARE22_MSB   0x1AAD  /* Reg to program speed */
+#define NGBE_CS4227_HOST_SPARE24_LSB   0x1AB0  /* Reg to program EDC */
+#define NGBE_CS4227_EDC_MODE_CX1       0x0002
+#define NGBE_CS4227_EDC_MODE_SR        0x0004
+#define NGBE_CS4227_RESET_HOLD         500     /* microseconds */
+#define NGBE_CS4227_RESET_DELAY        500     /* milliseconds */
+#define NGBE_CS4227_CHECK_DELAY        30      /* milliseconds */
+#define NGBE_PE                        0xE0    /* Port expander address */
+#define NGBE_PE_OUTPUT                 1       /* Output register offset */
+#define NGBE_PE_CONFIG                 3       /* Config register offset */
+#define NGBE_PE_BIT1                   (1 << 1)
+
+/* Flow control defines */
+#define NGBE_TAF_SYM_PAUSE (0x1)
+#define NGBE_TAF_ASM_PAUSE (0x2)
+
+/* Bit-shift macros */
+#define NGBE_SFF_VENDOR_OUI_BYTE0_SHIFT        24
+#define NGBE_SFF_VENDOR_OUI_BYTE1_SHIFT        16
+#define NGBE_SFF_VENDOR_OUI_BYTE2_SHIFT        8
+
+/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */
+#define NGBE_SFF_VENDOR_OUI_TYCO       0x00407600
+#define NGBE_SFF_VENDOR_OUI_FTL        0x00906500
+#define NGBE_SFF_VENDOR_OUI_AVAGO      0x00176A00
+#define NGBE_SFF_VENDOR_OUI_INTEL      0x001B2100
+
+/* I2C SDA and SCL timing parameters for standard mode */
+#define NGBE_I2C_T_HD_STA      4
+#define NGBE_I2C_T_LOW         5
+#define NGBE_I2C_T_HIGH        4
+#define NGBE_I2C_T_SU_STA      5
+#define NGBE_I2C_T_HD_DATA     5
+#define NGBE_I2C_T_SU_DATA     1
+#define NGBE_I2C_T_RISE        1
+#define NGBE_I2C_T_FALL        1
+#define NGBE_I2C_T_SU_STO      4
+#define NGBE_I2C_T_BUF         5
+
+#ifndef NGBE_SFP_DETECT_RETRIES
+#define NGBE_SFP_DETECT_RETRIES        10
+#endif /* NGBE_SFP_DETECT_RETRIES */
+
+/* SFP+ SFF-8472 Compliance */
+#define NGBE_SFF_SFF_8472_UNSUP        0x00
+
+enum ngbe_phy_type ngbe_get_phy_type_from_id(struct ngbe_hw *hw);
+s32 ngbe_init_phy_ops_common(struct ngbe_hw *hw);
+s32 ngbe_phy_read_reg_mdi(struct ngbe_hw *hw,
+							u32 reg_addr,
+							u32 device_type,
+							u16 *phy_data);
+s32 ngbe_phy_write_reg_mdi(struct ngbe_hw *hw,
+							u32 reg_addr,
+							u32 device_type,
+							u16 phy_data);
+
+s32 ngbe_phy_read_reg_sds_mii_yt8521s(struct ngbe_hw *hw,
+							u32 reg_addr,
+							u32 device_type,
+							u16 *phy_data);
+s32 ngbe_phy_write_reg_sds_mii_yt8521s(struct ngbe_hw *hw,
+							u32 reg_addr,
+							u32 device_type,
+							u16 phy_data);
+
+s32 ngbe_phy_read_reg_ext_yt8521s(struct ngbe_hw *hw,
+							u32 reg_addr,
+							u32 device_type,
+							u16 *phy_data);
+s32 ngbe_phy_write_reg_ext_yt8521s(struct ngbe_hw *hw,
+							u32 reg_addr,
+							u32 device_type,
+							u16 phy_data);
+
+s32 ngbe_phy_read_reg_sds_ext_yt8521s(struct ngbe_hw *hw,
+							u32 reg_addr,
+							u32 device_type,
+							u16 *phy_data);
+s32 ngbe_phy_write_reg_sds_ext_yt8521s(struct ngbe_hw *hw,
+							u32 reg_addr,
+							u32 device_type,
+							u16 phy_data);
+
+s32 ngbe_phy_init(struct ngbe_hw *hw);
+s32 ngbe_phy_identify(struct ngbe_hw *hw);
+s32 ngbe_phy_reset(struct ngbe_hw *hw);
+u32 ngbe_phy_setup_link(struct ngbe_hw *hw,
+						u32 speed,
+						bool need_restart_AN);
+s32 ngbe_phy_reset_m88e1512(struct ngbe_hw *hw);
+u32 ngbe_phy_setup_link_m88e1512(struct ngbe_hw *hw,
+									u32 speed,
+									bool autoneg_wait_to_complete);
+s32 ngbe_phy_check_overtemp(struct ngbe_hw *hw);
+
+s32 ngbe_check_zte_phy_id(struct ngbe_hw *hw);
+s32 ngbe_phy_reset_zte(struct ngbe_hw *hw);
+u32 ngbe_phy_setup_link_zte(struct ngbe_hw *hw,
+							u32 speed,
+							bool autoneg_wait_to_complete);
+s32 ngbe_phy_check_event(struct ngbe_hw *hw);
+s32 ngbe_phy_check_event_m88e1512(struct ngbe_hw *hw);
+s32 ngbe_phy_get_advertised_pause_m88e1512(struct ngbe_hw *hw, u8 *pause_bit);
+s32 ngbe_phy_get_lp_advertised_pause_m88e1512(struct ngbe_hw *hw,
+												u8 *pause_bit);
+s32 ngbe_phy_set_pause_advertisement_m88e1512(struct ngbe_hw *hw,
+												u16 pause_bit);
+
+s32 ngbe_phy_reset_yt8521s(struct ngbe_hw *hw);
+u32 ngbe_phy_setup_link_yt8521s(struct ngbe_hw *hw,
+									u32 speed,
+									bool autoneg_wait_to_complete);
+
+s32 ngbe_phy_check_event_yt8521s(struct ngbe_hw *hw);
+s32 ngbe_phy_get_advertised_pause_yt8521s(struct ngbe_hw *hw, u8 *pause_bit);
+s32 ngbe_phy_get_lp_advertised_pause_yt8521s(struct ngbe_hw *hw,
+												u8 *pause_bit);
+s32 ngbe_phy_set_pause_advertisement_yt8521s(struct ngbe_hw *hw,
+												u16 pause_bit);
+
+#endif /* _NGBE_PHY_H_ */
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_procfs.c b/drivers/net/ethernet/netswift/ngbe/ngbe_procfs.c
new file mode 100644
index 0000000000000..f7ef1da9fd4ef
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_procfs.c
@@ -0,0 +1,908 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+#include "ngbe.h"
+#include "ngbe_hw.h"
+#include "ngbe_type.h"
+
+#ifdef CONFIG_NGBE_PROCFS
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+
+static struct proc_dir_entry *ngbe_top_dir;
+
+static struct net_device_stats *procfs_get_stats(struct net_device *netdev)
+{
+	if (netdev == NULL)
+		return NULL;
+
+	/* only return the current stats */
+	return &netdev->stats;
+}
+
+static int ngbe_fwbanner(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	return snprintf(page, count, "%s\n", adapter->eeprom_id);
+}
+
+static int ngbe_porttype(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+	return snprintf(page, count, "%d\n",
+			test_bit(__NGBE_DOWN, &adapter->state));
+}
+
+static int ngbe_portspeed(char *page, char __always_unused **start,
+			   off_t __always_unused off, int count,
+			   int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	int speed = 0;
+
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	switch (adapter->link_speed) {
+	case NGBE_LINK_SPEED_100_FULL:
+		speed = 1;
+		break;
+	case NGBE_LINK_SPEED_1GB_FULL:
+		speed = 10;
+		break;
+	case NGBE_LINK_SPEED_10GB_FULL:
+		speed = 100;
+		break;
+	default:
+		break;
+	}
+	return snprintf(page, count, "%d\n", speed);
+}
+
+static int ngbe_wqlflag(char *page, char __always_unused **start,
+			 off_t __always_unused off, int count,
+			 int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	return snprintf(page, count, "%d\n", adapter->wol);
+}
+
+static int ngbe_xflowctl(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	struct ngbe_hw *hw;
+
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	hw = &adapter->hw;
+	if (hw == NULL)
+		return snprintf(page, count, "error: no hw data\n");
+
+	return snprintf(page, count, "%d\n", hw->fc.current_mode);
+}
+
+static int ngbe_rxdrops(char *page, char __always_unused **start,
+			 off_t __always_unused off, int count,
+			 int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	struct net_device_stats *net_stats;
+
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+	net_stats  = procfs_get_stats(adapter->netdev);
+	if (net_stats == NULL)
+		return snprintf(page, count, "error: no net stats\n");
+
+	return snprintf(page, count, "%lu\n",
+			net_stats->rx_dropped);
+}
+
+static int ngbe_rxerrors(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	struct net_device_stats *net_stats;
+
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+	net_stats  = procfs_get_stats(adapter->netdev);
+	if (net_stats == NULL)
+		return snprintf(page, count, "error: no net stats\n");
+
+	return snprintf(page, count, "%lu\n", net_stats->rx_errors);
+}
+
+static int ngbe_rxupacks(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	struct ngbe_hw *hw;
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	hw = &adapter->hw;
+	if (hw == NULL)
+		return snprintf(page, count, "error: no hw data\n");
+
+	return snprintf(page, count, "%d\n", rd32(hw, NGBE_TPR));
+}
+
+static int ngbe_rxmpacks(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	struct ngbe_hw *hw;
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	int i, mprc = 0;
+
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	hw = &adapter->hw;
+	if (hw == NULL)
+		return snprintf(page, count, "error: no hw data\n");
+	for (i = 0; i < 8; i++)
+		mprc += rd32(hw, NGBE_PX_MPRC(i));
+	return snprintf(page, count, "%d\n", mprc);
+}
+
+static int ngbe_rxbpacks(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	struct ngbe_hw *hw;
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	hw = &adapter->hw;
+	if (hw == NULL)
+		return snprintf(page, count, "error: no hw data\n");
+
+	return snprintf(page, count, "%d\n",
+			rd32(hw, NGBE_RX_BC_FRAMES_GOOD_LOW));
+}
+
+static int ngbe_txupacks(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	struct ngbe_hw *hw;
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	hw = &adapter->hw;
+	if (hw == NULL)
+		return snprintf(page, count, "error: no hw data\n");
+
+	return snprintf(page, count, "%d\n",
+			rd32(hw, NGBE_TX_FRAME_CNT_GOOD_BAD_LOW));
+}
+
+static int ngbe_txmpacks(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	struct ngbe_hw *hw;
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	hw = &adapter->hw;
+	if (hw == NULL)
+		return snprintf(page, count, "error: no hw data\n");
+
+	return snprintf(page, count, "%d\n",
+			rd32(hw, NGBE_TX_MC_FRAMES_GOOD_LOW));
+}
+
+static int ngbe_txbpacks(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	struct ngbe_hw *hw;
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	hw = &adapter->hw;
+	if (hw == NULL)
+		return snprintf(page, count, "error: no hw data\n");
+
+	return snprintf(page, count, "%d\n",
+			rd32(hw, NGBE_TX_BC_FRAMES_GOOD_LOW));
+}
+
+static int ngbe_txerrors(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	struct net_device_stats *net_stats;
+
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+	net_stats  = procfs_get_stats(adapter->netdev);
+	if (net_stats == NULL)
+		return snprintf(page, count, "error: no net stats\n");
+
+	return snprintf(page, count, "%lu\n",
+			net_stats->tx_errors);
+}
+
+static int ngbe_txdrops(char *page, char __always_unused **start,
+			 off_t __always_unused off, int count,
+			 int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	struct net_device_stats *net_stats;
+
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+	net_stats  = procfs_get_stats(adapter->netdev);
+	if (net_stats == NULL)
+		return snprintf(page, count, "error: no net stats\n");
+
+	return snprintf(page, count, "%lu\n",
+			net_stats->tx_dropped);
+}
+
+static int ngbe_rxframes(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	struct net_device_stats *net_stats;
+
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+	net_stats  = procfs_get_stats(adapter->netdev);
+	if (net_stats == NULL)
+		return snprintf(page, count, "error: no net stats\n");
+
+	return snprintf(page, count, "%lu\n",
+			net_stats->rx_packets);
+}
+
+static int ngbe_rxbytes(char *page, char __always_unused **start,
+			 off_t __always_unused off, int count,
+			 int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	struct net_device_stats *net_stats;
+
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+	net_stats  = procfs_get_stats(adapter->netdev);
+	if (net_stats == NULL)
+		return snprintf(page, count, "error: no net stats\n");
+
+	return snprintf(page, count, "%lu\n",
+			net_stats->rx_bytes);
+}
+
+static int ngbe_txframes(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	struct net_device_stats *net_stats;
+
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+	net_stats  = procfs_get_stats(adapter->netdev);
+	if (net_stats == NULL)
+		return snprintf(page, count, "error: no net stats\n");
+
+	return snprintf(page, count, "%lu\n",
+			net_stats->tx_packets);
+}
+
+static int ngbe_txbytes(char *page, char __always_unused **start,
+			 off_t __always_unused off, int count,
+			 int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	struct net_device_stats *net_stats;
+
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+	net_stats  = procfs_get_stats(adapter->netdev);
+	if (net_stats == NULL)
+		return snprintf(page, count, "error: no net stats\n");
+
+	return snprintf(page, count, "%lu\n",
+			net_stats->tx_bytes);
+}
+
+static int ngbe_linkstat(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	struct ngbe_hw *hw;
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	int bitmask = 0;
+	u32 link_speed;
+	bool link_up = false;
+
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	hw = &adapter->hw;
+	if (hw == NULL)
+		return snprintf(page, count, "error: no hw data\n");
+
+	if (!test_bit(__NGBE_DOWN, &adapter->state))
+		bitmask |= 1;
+
+	/* always assume link is up, if no check link function */
+	link_up = true;
+	if (link_up)
+		bitmask |= 2;
+
+	if (adapter->old_lsc != adapter->lsc_int) {
+		bitmask |= 4;
+		adapter->old_lsc = adapter->lsc_int;
+	}
+
+	return snprintf(page, count, "0x%X\n", bitmask);
+}
+
+static int ngbe_funcid(char *page, char __always_unused **start,
+			off_t __always_unused off, int count,
+			int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	struct ngbe_hw *hw;
+
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	hw = &adapter->hw;
+	if (hw == NULL)
+		return snprintf(page, count, "error: no hw data\n");
+
+	return snprintf(page, count, "0x%X\n", hw->bus.func);
+}
+
+static int ngbe_funcvers(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void __always_unused *data)
+{
+	return snprintf(page, count, "%s\n", ngbe_driver_version);
+}
+
+static int ngbe_macburn(char *page, char __always_unused **start,
+			 off_t __always_unused off, int count,
+			 int __always_unused *eof, void *data)
+{
+	struct ngbe_hw *hw;
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	hw = &adapter->hw;
+	if (hw == NULL)
+		return snprintf(page, count, "error: no hw data\n");
+
+	return snprintf(page, count, "0x%02X%02X%02X%02X%02X%02X\n",
+		       (unsigned int)hw->mac.perm_addr[0],
+		       (unsigned int)hw->mac.perm_addr[1],
+		       (unsigned int)hw->mac.perm_addr[2],
+		       (unsigned int)hw->mac.perm_addr[3],
+		       (unsigned int)hw->mac.perm_addr[4],
+		       (unsigned int)hw->mac.perm_addr[5]);
+}
+
+static int ngbe_macadmn(char *page, char __always_unused **start,
+			 off_t __always_unused off, int count,
+			 int __always_unused *eof, void *data)
+{
+	struct ngbe_hw *hw;
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	hw = &adapter->hw;
+	if (hw == NULL)
+		return snprintf(page, count, "error: no hw data\n");
+
+	return snprintf(page, count, "0x%02X%02X%02X%02X%02X%02X\n",
+		       (unsigned int)hw->mac.addr[0],
+		       (unsigned int)hw->mac.addr[1],
+		       (unsigned int)hw->mac.addr[2],
+		       (unsigned int)hw->mac.addr[3],
+		       (unsigned int)hw->mac.addr[4],
+		       (unsigned int)hw->mac.addr[5]);
+}
+
+static int ngbe_maclla1(char *page, char __always_unused **start,
+			 off_t __always_unused off, int count,
+			 int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	struct ngbe_hw *hw;
+	int rc;
+	u16 eeprom_buff[6];
+	u16 first_word = 0x37;
+	const u16 word_count = ARRAY_SIZE(eeprom_buff);
+
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	hw = &adapter->hw;
+	if (hw == NULL)
+		return snprintf(page, count, "error: no hw data\n");
+
+	rc = TCALL(hw, eeprom.ops.read_buffer, first_word, 1, &first_word);
+	if (rc != 0)
+		return snprintf(page, count,
+				"error: reading pointer to the EEPROM\n");
+
+	if (first_word != 0x0000 && first_word != 0xFFFF) {
+		rc = TCALL(hw, eeprom.ops.read_buffer, first_word, word_count,
+					eeprom_buff);
+		if (rc != 0)
+			return snprintf(page, count, "error: reading buffer\n");
+	} else {
+		memset(eeprom_buff, 0, sizeof(eeprom_buff));
+	}
+
+	switch (hw->bus.func) {
+	case 0:
+		return snprintf(page, count, "0x%04X%04X%04X\n",
+				eeprom_buff[0],
+				eeprom_buff[1],
+				eeprom_buff[2]);
+	case 1:
+		return snprintf(page, count, "0x%04X%04X%04X\n",
+				eeprom_buff[3],
+				eeprom_buff[4],
+				eeprom_buff[5]);
+	default:
+		return snprintf(page, count, "unexpected port %d\n", hw->bus.func);
+	}
+}
+
+static int ngbe_mtusize(char *page, char __always_unused **start,
+			 off_t __always_unused off, int count,
+			 int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	struct net_device *netdev;
+
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+	netdev = adapter->netdev;
+	if (netdev == NULL)
+		return snprintf(page, count, "error: no net device\n");
+
+	return snprintf(page, count, "%d\n", netdev->mtu);
+}
+
+static int ngbe_featflag(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	int bitmask = 0;
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	struct net_device *netdev;
+
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+	netdev = adapter->netdev;
+	if (netdev == NULL)
+		return snprintf(page, count, "error: no net device\n");
+	if (adapter->netdev->features & NETIF_F_RXCSUM)
+		bitmask |= 1;
+	return snprintf(page, count, "%d\n", bitmask);
+}
+
+static int ngbe_lsominct(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void __always_unused *data)
+{
+	return snprintf(page, count, "%d\n", 1);
+}
+
+static int ngbe_prommode(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	struct net_device *netdev;
+
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+	netdev = adapter->netdev;
+	if (netdev == NULL)
+		return snprintf(page, count, "error: no net device\n");
+
+	return snprintf(page, count, "%d\n",
+			netdev->flags & IFF_PROMISC);
+}
+
+static int ngbe_txdscqsz(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	return snprintf(page, count, "%d\n", adapter->tx_ring[0]->count);
+}
+
+static int ngbe_rxdscqsz(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	return snprintf(page, count, "%d\n", adapter->rx_ring[0]->count);
+}
+
+static int ngbe_rxqavg(char *page, char __always_unused **start,
+			off_t __always_unused off, int count,
+			int __always_unused *eof, void *data)
+{
+	int index;
+	int diff = 0;
+	u16 ntc;
+	u16 ntu;
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	for (index = 0; index < adapter->num_rx_queues; index++) {
+		ntc = adapter->rx_ring[index]->next_to_clean;
+		ntu = adapter->rx_ring[index]->next_to_use;
+
+		if (ntc >= ntu)
+			diff += (ntc - ntu);
+		else
+			diff += (adapter->rx_ring[index]->count - ntu + ntc);
+	}
+	if (adapter->num_rx_queues <= 0)
+		return snprintf(page, count,
+				"can't calculate, number of queues %d\n",
+				adapter->num_rx_queues);
+	return snprintf(page, count, "%d\n", diff/adapter->num_rx_queues);
+}
+
+static int ngbe_txqavg(char *page, char __always_unused **start,
+			off_t __always_unused off, int count,
+			int __always_unused *eof, void *data)
+{
+	int index;
+	int diff = 0;
+	u16 ntc;
+	u16 ntu;
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	for (index = 0; index < adapter->num_tx_queues; index++) {
+		ntc = adapter->tx_ring[index]->next_to_clean;
+		ntu = adapter->tx_ring[index]->next_to_use;
+
+		if (ntc >= ntu)
+			diff += (ntc - ntu);
+		else
+			diff += (adapter->tx_ring[index]->count - ntu + ntc);
+	}
+	if (adapter->num_tx_queues <= 0)
+		return snprintf(page, count,
+				"can't calculate, number of queues %d\n",
+				adapter->num_tx_queues);
+	return snprintf(page, count, "%d\n",
+			diff/adapter->num_tx_queues);
+}
+
+static int ngbe_iovotype(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void __always_unused *data)
+{
+	return snprintf(page, count, "2\n");
+}
+
+static int ngbe_funcnbr(char *page, char __always_unused **start,
+			 off_t __always_unused off, int count,
+			 int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	return snprintf(page, count, "%d\n", adapter->num_vfs);
+}
+
+static int ngbe_pciebnbr(char *page, char __always_unused **start,
+			  off_t __always_unused off, int count,
+			  int __always_unused *eof, void *data)
+{
+	struct ngbe_adapter *adapter = (struct ngbe_adapter *)data;
+	if (adapter == NULL)
+		return snprintf(page, count, "error: no adapter\n");
+
+	return snprintf(page, count, "%d\n", adapter->pdev->bus->number);
+}
+
+static int ngbe_therm_dealarmthresh(char *page, char __always_unused **start,
+				   off_t __always_unused off, int count,
+				   int __always_unused *eof, void *data)
+{
+	struct ngbe_therm_proc_data *therm_data =
+		(struct ngbe_therm_proc_data *)data;
+
+	if (therm_data == NULL)
+		return snprintf(page, count, "error: no therm_data\n");
+
+	return snprintf(page, count, "%d\n",
+			therm_data->sensor_data->dalarm_thresh);
+}
+
+static int ngbe_therm_alarmthresh(char *page, char __always_unused **start,
+				     off_t __always_unused off, int count,
+				     int __always_unused *eof, void *data)
+{
+	struct ngbe_therm_proc_data *therm_data =
+		(struct ngbe_therm_proc_data *)data;
+
+	if (therm_data == NULL)
+		return snprintf(page, count, "error: no therm_data\n");
+
+	return snprintf(page, count, "%d\n",
+			therm_data->sensor_data->alarm_thresh);
+}
+
+static int ngbe_therm_temp(char *page, char __always_unused **start,
+			    off_t __always_unused off, int count,
+			    int __always_unused *eof, void *data)
+{
+	s32 status;
+	struct ngbe_therm_proc_data *therm_data =
+		(struct ngbe_therm_proc_data *)data;
+
+	if (therm_data == NULL)
+		return snprintf(page, count, "error: no therm_data\n");
+
+	status = ngbe_get_thermal_sensor_data(therm_data->hw);
+	if (status != 0)
+		snprintf(page, count, "error: status %d returned\n", status);
+
+	return snprintf(page, count, "%d\n", therm_data->sensor_data->temp);
+}
+
+struct ngbe_proc_type {
+	char name[32];
+	int (*read)(char*, char**, off_t, int, int*, void*);
+};
+
+struct ngbe_proc_type ngbe_proc_entries[] = {
+	{"fwbanner", &ngbe_fwbanner},
+	{"porttype", &ngbe_porttype},
+	{"portspeed", &ngbe_portspeed},
+	{"wqlflag", &ngbe_wqlflag},
+	{"xflowctl", &ngbe_xflowctl},
+	{"rxdrops", &ngbe_rxdrops},
+	{"rxerrors", &ngbe_rxerrors},
+	{"rxupacks", &ngbe_rxupacks},
+	{"rxmpacks", &ngbe_rxmpacks},
+	{"rxbpacks", &ngbe_rxbpacks},
+	{"txdrops", &ngbe_txdrops},
+	{"txerrors", &ngbe_txerrors},
+	{"txupacks", &ngbe_txupacks},
+	{"txmpacks", &ngbe_txmpacks},
+	{"txbpacks", &ngbe_txbpacks},
+	{"rxframes", &ngbe_rxframes},
+	{"rxbytes", &ngbe_rxbytes},
+	{"txframes", &ngbe_txframes},
+	{"txbytes", &ngbe_txbytes},
+	{"linkstat", &ngbe_linkstat},
+	{"funcid", &ngbe_funcid},
+	{"funcvers", &ngbe_funcvers},
+	{"macburn", &ngbe_macburn},
+	{"macadmn", &ngbe_macadmn},
+	{"maclla1", &ngbe_maclla1},
+	{"mtusize", &ngbe_mtusize},
+	{"featflag", &ngbe_featflag},
+	{"lsominct", &ngbe_lsominct},
+	{"prommode", &ngbe_prommode},
+	{"txdscqsz", &ngbe_txdscqsz},
+	{"rxdscqsz", &ngbe_rxdscqsz},
+	{"txqavg", &ngbe_txqavg},
+	{"rxqavg", &ngbe_rxqavg},
+	{"iovotype", &ngbe_iovotype},
+	{"funcnbr", &ngbe_funcnbr},
+	{"pciebnbr", &ngbe_pciebnbr},
+	{"", NULL}
+};
+
+struct ngbe_proc_type ngbe_internal_entries[] = {
+	{"temp", &ngbe_therm_temp},
+	{"alarmthresh", &ngbe_therm_alarmthresh},
+	{"dealarmthresh", &ngbe_therm_dealarmthresh},
+	{"", NULL}
+};
+
+void ngbe_del_proc_entries(struct ngbe_adapter *adapter)
+{
+	int index;
+	int i;
+	char buf[16];   /* much larger than the sensor number will ever be */
+
+	if (ngbe_top_dir == NULL)
+		return;
+
+	for (i = 0; i < NGBE_MAX_SENSORS; i++) {
+		if (adapter->therm_dir[i] == NULL)
+			continue;
+
+		for (index = 0; ; index++) {
+			if (ngbe_internal_entries[index].read == NULL)
+				break;
+
+			remove_proc_entry(ngbe_internal_entries[index].name,
+					   adapter->therm_dir[i]);
+		}
+		snprintf(buf, sizeof(buf), "sensor_%d", i);
+		remove_proc_entry(buf, adapter->info_dir);
+	}
+
+	if (adapter->info_dir != NULL) {
+		for (index = 0; ; index++) {
+			if (ngbe_proc_entries[index].read == NULL)
+				break;
+			remove_proc_entry(ngbe_proc_entries[index].name,
+					  adapter->info_dir);
+		}
+		remove_proc_entry("info", adapter->eth_dir);
+	}
+
+	if (adapter->eth_dir != NULL)
+		remove_proc_entry(pci_name(adapter->pdev), ngbe_top_dir);
+}
+
+/* called from ngbe_main.c */
+void ngbe_procfs_exit(struct ngbe_adapter *adapter)
+{
+	ngbe_del_proc_entries(adapter);
+}
+
+int ngbe_procfs_topdir_init(void)
+{
+	ngbe_top_dir = proc_mkdir("driver/ngbe", NULL);
+	if (ngbe_top_dir == NULL)
+		return -ENOMEM;
+
+	return 0;
+}
+
+void ngbe_procfs_topdir_exit(void)
+{
+	remove_proc_entry("driver/ngbe", NULL);
+}
+
+/* called from ngbe_main.c */
+int ngbe_procfs_init(struct ngbe_adapter *adapter)
+{
+	int rc = 0;
+	int index;
+	int i;
+	char buf[16];   /* much larger than the sensor number will ever be */
+
+	adapter->eth_dir = NULL;
+	adapter->info_dir = NULL;
+	adapter->therm_dir = NULL;
+
+	if (ngbe_top_dir == NULL) {
+		rc = -ENOMEM;
+		goto fail;
+	}
+
+	adapter->eth_dir = proc_mkdir(pci_name(adapter->pdev), ngbe_top_dir);
+	if (adapter->eth_dir == NULL) {
+		rc = -ENOMEM;
+		goto fail;
+	}
+
+	adapter->info_dir = proc_mkdir("info", adapter->eth_dir);
+	if (adapter->info_dir == NULL) {
+		rc = -ENOMEM;
+		goto fail;
+	}
+	for (index = 0; ; index++) {
+		if (ngbe_proc_entries[index].read == NULL)
+			break;
+		if (!(create_proc_read_entry(ngbe_proc_entries[index].name,
+					   0444,
+					   adapter->info_dir,
+					   ngbe_proc_entries[index].read,
+					   adapter))) {
+
+			rc = -ENOMEM;
+			goto fail;
+		}
+	}
+	if (!TCALL(&(adapter->hw), ops.init_thermal_sensor_thresh))
+		goto exit;
+
+	snprintf(buf, sizeof(buf), "sensor");
+	adapter->therm_dir = proc_mkdir(buf, adapter->info_dir);
+	if (adapter->therm_dir == NULL) {
+		rc = -ENOMEM;
+		goto fail;
+	}
+	for (index = 0; ; index++) {
+		if (ngbe_internal_entries[index].read == NULL)
+			break;
+		/*
+		 * therm_data struct contains pointer the read func
+		 * will be needing
+		 */
+		adapter->therm_data.hw = &adapter->hw;
+		adapter->therm_data.sensor_data =
+			&adapter->hw.mac.thermal_sensor_data.sensor;
+
+		if (!(create_proc_read_entry(
+				   ngbe_internal_entries[index].name,
+				   0444,
+				   adapter->therm_dir,
+				   ngbe_internal_entries[index].read,
+				   &adapter->therm_data))) {
+			rc = -ENOMEM;
+			goto fail;
+		}
+	}
+
+	goto exit;
+
+fail:
+	ngbe_del_proc_entries(adapter);
+exit:
+	return rc;
+}
+
+#endif /* CONFIG_NGBE_PROCFS */
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_ptp.c b/drivers/net/ethernet/netswift/ngbe/ngbe_ptp.c
new file mode 100644
index 0000000000000..87e7d5dc11a43
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_ptp.c
@@ -0,0 +1,858 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#include "ngbe.h"
+#include <linux/ptp_classify.h>
+
+/*
+ * SYSTIME is defined by a fixed point system which allows the user to
+ * define the scale counter increment value at every level change of
+ * the oscillator driving SYSTIME value. The time unit is determined by
+ * the clock frequency of the oscillator and TIMINCA register.
+ * The cyclecounter and timecounter structures are used to to convert
+ * the scale counter into nanoseconds. SYSTIME registers need to be converted
+ * to ns values by use of only a right shift.
+ * The following math determines the largest incvalue that will fit into
+ * the available bits in the TIMINCA register:
+ *   Period * [ 2 ^ ( MaxWidth - PeriodWidth ) ]
+ * PeriodWidth: Number of bits to store the clock period
+ * MaxWidth: The maximum width value of the TIMINCA register
+ * Period: The clock period for the oscillator, which changes based on the link
+ * speed:
+ *   At 10Gb link or no link, the period is 6.4 ns.
+ *   At 1Gb link, the period is multiplied by 10. (64ns)
+ *   At 100Mb link, the period is multiplied by 100. (640ns)
+ * round(): discard the fractional portion of the calculation
+ *
+ * The calculated value allows us to right shift the SYSTIME register
+ * value in order to quickly convert it into a nanosecond clock,
+ * while allowing for the maximum possible adjustment value.
+ *
+ * LinkSpeed    ClockFreq   ClockPeriod  TIMINCA:IV
+ * 10000Mbps    156.25MHz   6.4*10^-9    0xCCCCCC(0xFFFFF/ns)
+ * 1000 Mbps    62.5  MHz   16 *10^-9    0x800000(0x7FFFF/ns)
+ * 100  Mbps    6.25  MHz   160*10^-9    0xA00000(0xFFFF/ns)
+ * 10   Mbps    0.625 MHz   1600*10^-9   0xC7F380(0xFFF/ns)
+ * FPGA         31.25 MHz   32 *10^-9    0x800000(0x3FFFF/ns)
+ *
+ * These diagrams are only for the 10Gb link period
+ *
+ *       +--------------+  +--------------+
+ *       |      32      |  | 8 | 3 |  20  |
+ *       *--------------+  +--------------+
+ *        ________ 43 bits ______/  fract
+ *
+ * The 43 bit SYSTIME overflows every
+ *   2^43 * 10^-9 / 3600 = 2.4 hours
+ */
+#define NGBE_INCVAL_10GB 0xCCCCCC
+#define NGBE_INCVAL_1GB  0x2000000/*in Emerald  all speed is same*/
+#define NGBE_INCVAL_100  0xA00000
+#define NGBE_INCVAL_10   0xC7F380
+#define NGBE_INCVAL_FPGA 0x800000
+
+#define NGBE_INCVAL_SHIFT_10GB  20
+#define NGBE_INCVAL_SHIFT_1GB   22/*in Emerald  all speed is same*/
+#define NGBE_INCVAL_SHIFT_100   15
+#define NGBE_INCVAL_SHIFT_10    12
+#define NGBE_INCVAL_SHIFT_FPGA  17
+
+#define NGBE_OVERFLOW_PERIOD    (HZ * 30)
+#define NGBE_PTP_TX_TIMEOUT     (HZ)
+
+/**
+ * ngbe_ptp_read - read raw cycle counter (to be used by time counter)
+ * @hw_cc: the cyclecounter structure
+ *
+ * this function reads the cyclecounter registers and is called by the
+ * cyclecounter structure used to construct a ns counter from the
+ * arbitrary fixed point registers
+ */
+static u64 ngbe_ptp_read(const struct cyclecounter *hw_cc)
+{
+	struct ngbe_adapter *adapter =
+		container_of(hw_cc, struct ngbe_adapter, hw_cc);
+	struct ngbe_hw *hw = &adapter->hw;
+	u64 stamp = 0;
+
+	stamp |= (u64)rd32(hw, NGBE_TSEC_1588_SYSTIML);
+	stamp |= (u64)rd32(hw, NGBE_TSEC_1588_SYSTIMH) << 32;
+
+	return stamp;
+}
+
+/**
+ * ngbe_ptp_convert_to_hwtstamp - convert register value to hw timestamp
+ * @adapter: private adapter structure
+ * @hwtstamp: stack timestamp structure
+ * @systim: unsigned 64bit system time value
+ *
+ * We need to convert the adapter's RX/TXSTMP registers into a hwtstamp value
+ * which can be used by the stack's ptp functions.
+ *
+ * The lock is used to protect consistency of the cyclecounter and the SYSTIME
+ * registers. However, it does not need to protect against the Rx or Tx
+ * timestamp registers, as there can't be a new timestamp until the old one is
+ * unlatched by reading.
+ *
+ * In addition to the timestamp in hardware, some controllers need a software
+ * overflow cyclecounter, and this function takes this into account as well.
+ **/
+static void ngbe_ptp_convert_to_hwtstamp(struct ngbe_adapter *adapter,
+					  struct skb_shared_hwtstamps *hwtstamp,
+					  u64 timestamp)
+{
+	unsigned long flags;
+	u64 ns;
+
+	memset(hwtstamp, 0, sizeof(*hwtstamp));
+
+	spin_lock_irqsave(&adapter->tmreg_lock, flags);
+	ns = timecounter_cyc2time(&adapter->hw_tc, timestamp);
+	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+
+	hwtstamp->hwtstamp = ns_to_ktime(ns);
+}
+
+/**
+ * ngbe_ptp_adjfreq
+ * @ptp: the ptp clock structure
+ * @ppb: parts per billion adjustment from base
+ *
+ * adjust the frequency of the ptp cycle counter by the
+ * indicated ppb from the base frequency.
+ */
+static int ngbe_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
+{
+	struct ngbe_adapter *adapter =
+		container_of(ptp, struct ngbe_adapter, ptp_caps);
+	struct ngbe_hw *hw = &adapter->hw;
+	u64 freq, incval;
+	u32 diff;
+	int neg_adj = 0;
+
+	if (ppb < 0) {
+		neg_adj = 1;
+		ppb = -ppb;
+	}
+
+	smp_mb();
+	incval = READ_ONCE(adapter->base_incval);
+
+	freq = incval;
+	freq *= ppb;
+	diff = div_u64(freq, 1000000000ULL);
+
+	incval = neg_adj ? (incval - diff) : (incval + diff);
+	/* temp setting*/
+
+	if (incval > NGBE_TSEC_1588_INC_IV(~0))
+		e_dev_warn("PTP ppb adjusted SYSTIME rate overflowed!\n");
+	wr32(hw, NGBE_TSEC_1588_INC, NGBE_TSEC_1588_INC_IV(incval));
+
+	return 0;
+}
+
+/**
+ * ngbe_ptp_adjtime
+ * @ptp: the ptp clock structure
+ * @delta: offset to adjust the cycle counter by ns
+ *
+ * adjust the timer by resetting the timecounter structure.
+ */
+static int ngbe_ptp_adjtime(struct ptp_clock_info *ptp,
+					 s64 delta)
+{
+	struct ngbe_adapter *adapter =
+		container_of(ptp, struct ngbe_adapter, ptp_caps);
+	unsigned long flags;
+
+	spin_lock_irqsave(&adapter->tmreg_lock, flags);
+	timecounter_adjtime(&adapter->hw_tc, delta);
+	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+
+	return 0;
+}
+
+/**
+ * ngbe_ptp_gettime64
+ * @ptp: the ptp clock structure
+ * @ts: timespec64 structure to hold the current time value
+ *
+ * read the timecounter and return the correct value on ns,
+ * after converting it into a struct timespec64.
+ */
+static int ngbe_ptp_gettime64(struct ptp_clock_info *ptp,
+			       struct timespec64 *ts)
+{
+	struct ngbe_adapter *adapter =
+		container_of(ptp, struct ngbe_adapter, ptp_caps);
+	unsigned long flags;
+	u64 ns;
+
+	spin_lock_irqsave(&adapter->tmreg_lock, flags);
+	ns = timecounter_read(&adapter->hw_tc);
+	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+
+	*ts = ns_to_timespec64(ns);
+
+	return 0;
+}
+
+/**
+ * ngbe_ptp_settime64
+ * @ptp: the ptp clock structure
+ * @ts: the timespec64 containing the new time for the cycle counter
+ *
+ * reset the timecounter to use a new base value instead of the kernel
+ * wall timer value.
+ */
+static int ngbe_ptp_settime64(struct ptp_clock_info *ptp,
+					   const struct timespec64 *ts)
+{
+	struct ngbe_adapter *adapter =
+		container_of(ptp, struct ngbe_adapter, ptp_caps);
+	u64 ns;
+	unsigned long flags;
+
+	ns = timespec64_to_ns(ts);
+
+	/* reset the timecounter */
+	spin_lock_irqsave(&adapter->tmreg_lock, flags);
+	timecounter_init(&adapter->hw_tc, &adapter->hw_cc, ns);
+	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+
+	return 0;
+}
+
+/**
+ * ngbe_ptp_feature_enable
+ * @ptp: the ptp clock structure
+ * @rq: the requested feature to change
+ * @on: whether to enable or disable the feature
+ *
+ * enable (or disable) ancillary features of the phc subsystem.
+ * our driver only supports the PPS feature on the X540
+ */
+static int ngbe_ptp_feature_enable(struct ptp_clock_info *ptp,
+				    struct ptp_clock_request *rq, int on)
+{
+	return -ENOTSUPP;
+}
+
+/**
+ * ngbe_ptp_check_pps_event
+ * @adapter: the private adapter structure
+ * @eicr: the interrupt cause register value
+ *
+ * This function is called by the interrupt routine when checking for
+ * interrupts. It will check and handle a pps event.
+ */
+void ngbe_ptp_check_pps_event(struct ngbe_adapter *adapter)
+{
+	struct ptp_clock_event event;
+
+	event.type = PTP_CLOCK_PPS;
+
+	/* this check is necessary in case the interrupt was enabled via some
+	 * alternative means (ex. debug_fs). Better to check here than
+	 * everywhere that calls this function.
+	 */
+	if (!adapter->ptp_clock)
+		return;
+
+	/* we don't config PPS on SDP yet, so just return.
+	 * ptp_clock_event(adapter->ptp_clock, &event);
+	 */
+}
+
+/**
+ * ngbe_ptp_overflow_check - watchdog task to detect SYSTIME overflow
+ * @adapter: private adapter struct
+ *
+ * this watchdog task periodically reads the timecounter
+ * in order to prevent missing when the system time registers wrap
+ * around. This needs to be run approximately twice a minute for the fastest
+ * overflowing hardware. We run it for all hardware since it shouldn't have a
+ * large impact.
+ */
+void ngbe_ptp_overflow_check(struct ngbe_adapter *adapter)
+{
+	bool timeout = time_is_before_jiffies(adapter->last_overflow_check +
+										NGBE_OVERFLOW_PERIOD);
+	struct timespec64 ts;
+
+	if (timeout) {
+		ngbe_ptp_gettime64(&adapter->ptp_caps, &ts);
+		adapter->last_overflow_check = jiffies;
+	}
+}
+
+/**
+ * ngbe_ptp_rx_hang - detect error case when Rx timestamp registers latched
+ * @adapter: private network adapter structure
+ *
+ * this watchdog task is scheduled to detect error case where hardware has
+ * dropped an Rx packet that was timestamped when the ring is full. The
+ * particular error is rare but leaves the device in a state unable to timestamp
+ * any future packets.
+ */
+void ngbe_ptp_rx_hang(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	struct ngbe_ring *rx_ring;
+	u32 tsyncrxctl = rd32(hw, NGBE_PSR_1588_CTL);
+	unsigned long rx_event;
+	int n;
+
+	/* if we don't have a valid timestamp in the registers, just update the
+	 * timeout counter and exit
+	 */
+	if (!(tsyncrxctl & NGBE_PSR_1588_CTL_VALID)) {
+		adapter->last_rx_ptp_check = jiffies;
+		return;
+	}
+
+	/* determine the most recent watchdog or rx_timestamp event */
+	rx_event = adapter->last_rx_ptp_check;
+	for (n = 0; n < adapter->num_rx_queues; n++) {
+		rx_ring = adapter->rx_ring[n];
+		if (time_after(rx_ring->last_rx_timestamp, rx_event))
+			rx_event = rx_ring->last_rx_timestamp;
+	}
+
+	/* only need to read the high RXSTMP register to clear the lock */
+	if (time_is_before_jiffies(rx_event + 5 * HZ)) {
+		rd32(hw, NGBE_PSR_1588_STMPH);
+		adapter->last_rx_ptp_check = jiffies;
+
+		adapter->rx_hwtstamp_cleared++;
+		e_warn(drv, "clearing RX Timestamp hang");
+	}
+}
+
+/**
+ * ngbe_ptp_clear_tx_timestamp - utility function to clear Tx timestamp state
+ * @adapter: the private adapter structure
+ *
+ * This function should be called whenever the state related to a Tx timestamp
+ * needs to be cleared. This helps ensure that all related bits are reset for
+ * the next Tx timestamp event.
+ */
+static void ngbe_ptp_clear_tx_timestamp(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+
+	rd32(hw, NGBE_TSEC_1588_STMPH);
+	if (adapter->ptp_tx_skb) {
+		dev_kfree_skb_any(adapter->ptp_tx_skb);
+		adapter->ptp_tx_skb = NULL;
+	}
+	clear_bit_unlock(__NGBE_PTP_TX_IN_PROGRESS, &adapter->state);
+}
+
+/**
+ * ngbe_ptp_tx_hwtstamp - utility function which checks for TX time stamp
+ * @adapter: the private adapter struct
+ *
+ * if the timestamp is valid, we convert it into the timecounter ns
+ * value, then store that result into the shhwtstamps structure which
+ * is passed up the network stack
+ */
+static void ngbe_ptp_tx_hwtstamp(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	struct skb_shared_hwtstamps shhwtstamps;
+	u64 regval = 0;
+
+	regval |= (u64)rd32(hw, NGBE_TSEC_1588_STMPL);
+	regval |= (u64)rd32(hw, NGBE_TSEC_1588_STMPH) << 32;
+
+	ngbe_ptp_convert_to_hwtstamp(adapter, &shhwtstamps, regval);
+	skb_tstamp_tx(adapter->ptp_tx_skb, &shhwtstamps);
+
+	ngbe_ptp_clear_tx_timestamp(adapter);
+}
+
+/**
+ * ngbe_ptp_tx_hwtstamp_work
+ * @work: pointer to the work struct
+ *
+ * This work item polls TSYNCTXCTL valid bit to determine when a Tx hardware
+ * timestamp has been taken for the current skb. It is necesary, because the
+ * descriptor's "done" bit does not correlate with the timestamp event.
+ */
+static void ngbe_ptp_tx_hwtstamp_work(struct work_struct *work)
+{
+	struct ngbe_adapter *adapter = container_of(work, struct ngbe_adapter,
+										ptp_tx_work);
+	struct ngbe_hw *hw = &adapter->hw;
+	bool timeout = time_is_before_jiffies(adapter->ptp_tx_start +
+										NGBE_PTP_TX_TIMEOUT);
+	u32 tsynctxctl;
+
+	/* we have to have a valid skb to poll for a timestamp */
+	if (!adapter->ptp_tx_skb) {
+		ngbe_ptp_clear_tx_timestamp(adapter);
+		return;
+	}
+
+	/* stop polling once we have a valid timestamp */
+	tsynctxctl = rd32(hw, NGBE_TSEC_1588_CTL);
+	if (tsynctxctl & NGBE_TSEC_1588_CTL_VALID) {
+		ngbe_ptp_tx_hwtstamp(adapter);
+		return;
+	}
+
+	/* check timeout last in case timestamp event just occurred */
+	if (timeout) {
+		ngbe_ptp_clear_tx_timestamp(adapter);
+		adapter->tx_hwtstamp_timeouts++;
+		e_warn(drv, "clearing Tx Timestamp hang");
+	} else {
+		/* reschedule to keep checking until we timeout */
+		schedule_work(&adapter->ptp_tx_work);
+	}
+}
+
+/**
+ * ngbe_ptp_rx_rgtstamp - utility function which checks for RX time stamp
+ * @q_vector: structure containing interrupt and ring information
+ * @skb: particular skb to send timestamp with
+ *
+ * if the timestamp is valid, we convert it into the timecounter ns
+ * value, then store that result into the shhwtstamps structure which
+ * is passed up the network stack
+ */
+void ngbe_ptp_rx_hwtstamp(struct ngbe_adapter *adapter, struct sk_buff *skb)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u64 regval = 0;
+	u32 tsyncrxctl;
+
+	/*
+	 * Read the tsyncrxctl register afterwards in order to prevent taking an
+	 * I/O hit on every packet.
+	 */
+	tsyncrxctl = rd32(hw, NGBE_PSR_1588_CTL);
+	if (!(tsyncrxctl & NGBE_PSR_1588_CTL_VALID))
+		return;
+
+	regval |= (u64)rd32(hw, NGBE_PSR_1588_STMPL);
+	regval |= (u64)rd32(hw, NGBE_PSR_1588_STMPH) << 32;
+
+	ngbe_ptp_convert_to_hwtstamp(adapter, skb_hwtstamps(skb), regval);
+}
+
+/**
+ * ngbe_ptp_get_ts_config - get current hardware timestamping configuration
+ * @adapter: pointer to adapter structure
+ * @ifreq: ioctl data
+ *
+ * This function returns the current timestamping settings. Rather than
+ * attempt to deconstruct registers to fill in the values, simply keep a copy
+ * of the old settings around, and return a copy when requested.
+ */
+int ngbe_ptp_get_ts_config(struct ngbe_adapter *adapter, struct ifreq *ifr)
+{
+	struct hwtstamp_config *config = &adapter->tstamp_config;
+
+	return copy_to_user(ifr->ifr_data, config,
+						sizeof(*config)) ? -EFAULT : 0;
+}
+
+/**
+ * ngbe_ptp_set_timestamp_mode - setup the hardware for the requested mode
+ * @adapter: the private ngbe adapter structure
+ * @config: the hwtstamp configuration requested
+ *
+ * Outgoing time stamping can be enabled and disabled. Play nice and
+ * disable it when requested, although it shouldn't cause any overhead
+ * when no packet needs it. At most one packet in the queue may be
+ * marked for time stamping, otherwise it would be impossible to tell
+ * for sure to which packet the hardware time stamp belongs.
+ *
+ * Incoming time stamping has to be configured via the hardware
+ * filters. Not all combinations are supported, in particular event
+ * type has to be specified. Matching the kind of event packet is
+ * not supported, with the exception of "all V2 events regardless of
+ * level 2 or 4".
+ *
+ * Since hardware always timestamps Path delay packets when timestamping V2
+ * packets, regardless of the type specified in the register, only use V2
+ * Event mode. This more accurately tells the user what the hardware is going
+ * to do anyways.
+ *
+ * Note: this may modify the hwtstamp configuration towards a more general
+ * mode, if required to support the specifically requested mode.
+ */
+static int ngbe_ptp_set_timestamp_mode(struct ngbe_adapter *adapter,
+					struct hwtstamp_config *config)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 tsync_tx_ctl = NGBE_TSEC_1588_CTL_ENABLED;
+	u32 tsync_rx_ctl = NGBE_PSR_1588_CTL_ENABLED;
+	u32 tsync_rx_mtrl = PTP_EV_PORT << 16;
+	bool is_l2 = false;
+	u32 regval;
+
+	/* reserved for future extensions */
+	if (config->flags)
+		return -EINVAL;
+
+	switch (config->tx_type) {
+	case HWTSTAMP_TX_OFF:
+		tsync_tx_ctl = 0;
+	case HWTSTAMP_TX_ON:
+		break;
+	default:
+		return -ERANGE;
+	}
+
+	switch (config->rx_filter) {
+	case HWTSTAMP_FILTER_NONE:
+		tsync_rx_ctl = 0;
+		tsync_rx_mtrl = 0;
+		adapter->flags &= ~(NGBE_FLAG_RX_HWTSTAMP_ENABLED |
+							NGBE_FLAG_RX_HWTSTAMP_IN_REGISTER);
+		break;
+	case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
+		tsync_rx_ctl |= NGBE_PSR_1588_CTL_TYPE_L4_V1;
+		tsync_rx_mtrl |= NGBE_PSR_1588_MSGTYPE_V1_SYNC_MSG;
+		adapter->flags |= (NGBE_FLAG_RX_HWTSTAMP_ENABLED |
+							NGBE_FLAG_RX_HWTSTAMP_IN_REGISTER);
+		break;
+	case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
+		tsync_rx_ctl |= NGBE_PSR_1588_CTL_TYPE_L4_V1;
+		tsync_rx_mtrl |= NGBE_PSR_1588_MSGTYPE_V1_DELAY_REQ_MSG;
+		adapter->flags |= (NGBE_FLAG_RX_HWTSTAMP_ENABLED |
+							NGBE_FLAG_RX_HWTSTAMP_IN_REGISTER);
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+	case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+	case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+		tsync_rx_ctl |= NGBE_PSR_1588_CTL_TYPE_EVENT_V2;
+		is_l2 = true;
+		config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
+		adapter->flags |= (NGBE_FLAG_RX_HWTSTAMP_ENABLED |
+							NGBE_FLAG_RX_HWTSTAMP_IN_REGISTER);
+		break;
+	case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
+	case HWTSTAMP_FILTER_ALL:
+	default:
+		/* register RXMTRL must be set in order to do V1 packets,
+		 * therefore it is not possible to time stamp both V1 Sync and
+		 * Delay_Req messages unless hardware supports timestamping all
+		 * packets => return error
+		 */
+		adapter->flags &= ~(NGBE_FLAG_RX_HWTSTAMP_ENABLED |
+							NGBE_FLAG_RX_HWTSTAMP_IN_REGISTER);
+		config->rx_filter = HWTSTAMP_FILTER_NONE;
+		return -ERANGE;
+	}
+
+	/* define ethertype filter for timestamping L2 packets */
+	if (is_l2)
+		wr32(hw,
+			NGBE_PSR_ETYPE_SWC(NGBE_PSR_ETYPE_SWC_FILTER_1588),
+			(NGBE_PSR_ETYPE_SWC_FILTER_EN | /* enable filter */
+			 NGBE_PSR_ETYPE_SWC_1588 | /* enable timestamping */
+			 ETH_P_1588));     /* 1588 eth protocol type */
+	else
+		wr32(hw,
+			NGBE_PSR_ETYPE_SWC(NGBE_PSR_ETYPE_SWC_FILTER_1588),
+			0);
+
+	/* enable/disable TX */
+	regval = rd32(hw, NGBE_TSEC_1588_CTL);
+	regval &= ~NGBE_TSEC_1588_CTL_ENABLED;
+	regval |= tsync_tx_ctl;
+	wr32(hw, NGBE_TSEC_1588_CTL, regval);
+
+	/* enable/disable RX */
+	regval = rd32(hw, NGBE_PSR_1588_CTL);
+	regval &= ~(NGBE_PSR_1588_CTL_ENABLED | NGBE_PSR_1588_CTL_TYPE_MASK);
+	regval |= tsync_rx_ctl;
+	wr32(hw, NGBE_PSR_1588_CTL, regval);
+
+	/* define which PTP packets are time stamped */
+	wr32(hw, NGBE_PSR_1588_MSGTYPE, tsync_rx_mtrl);
+
+	NGBE_WRITE_FLUSH(hw);
+
+	/* clear TX/RX timestamp state, just to be sure */
+	ngbe_ptp_clear_tx_timestamp(adapter);
+	rd32(hw, NGBE_PSR_1588_STMPH);
+
+	return 0;
+}
+
+/**
+ * ngbe_ptp_set_ts_config - user entry point for timestamp mode
+ * @adapter: pointer to adapter struct
+ * @ifreq: ioctl data
+ *
+ * Set hardware to requested mode. If unsupported, return an error with no
+ * changes. Otherwise, store the mode for future reference.
+ */
+int ngbe_ptp_set_ts_config(struct ngbe_adapter *adapter, struct ifreq *ifr)
+{
+	struct hwtstamp_config config;
+	int err;
+
+	if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
+		return -EFAULT;
+
+	err = ngbe_ptp_set_timestamp_mode(adapter, &config);
+	if (err)
+		return err;
+
+	/* save these settings for future reference */
+	memcpy(&adapter->tstamp_config, &config,
+			sizeof(adapter->tstamp_config));
+
+	return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
+		-EFAULT : 0;
+}
+
+static void ngbe_ptp_link_speed_adjust(struct ngbe_adapter *adapter,
+					u32 *shift, u32 *incval)
+{
+	/**
+	 * Scale the NIC cycle counter by a large factor so that
+	 * relatively small corrections to the frequency can be added
+	 * or subtracted. The drawbacks of a large factor include
+	 * (a) the clock register overflows more quickly, (b) the cycle
+	 * counter structure must be able to convert the systime value
+	 * to nanoseconds using only a multiplier and a right-shift,
+	 * and (c) the value must fit within the timinca register space
+	 * => math based on internal DMA clock rate and available bits
+	 *
+	 * Note that when there is no link, internal DMA clock is same as when
+	 * link speed is 10Gb. Set the registers correctly even when link is
+	 * down to preserve the clock setting
+	 */
+
+	*shift = NGBE_INCVAL_SHIFT_1GB;
+	*incval = NGBE_INCVAL_1GB;
+
+	return;
+}
+
+/**
+ * ngbe_ptp_start_cyclecounter - create the cycle counter from hw
+ * @adapter: pointer to the adapter structure
+ *
+ * This function should be called to set the proper values for the TIMINCA
+ * register and tell the cyclecounter structure what the tick rate of SYSTIME
+ * is. It does not directly modify SYSTIME registers or the timecounter
+ * structure. It should be called whenever a new TIMINCA value is necessary,
+ * such as during initialization or when the link speed changes.
+ */
+void ngbe_ptp_start_cyclecounter(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	unsigned long flags;
+	struct cyclecounter cc;
+	u32 incval = 0;
+
+	/* For some of the boards below this mask is technically incorrect.
+	 * The timestamp mask overflows at approximately 61bits. However the
+	 * particular hardware does not overflow on an even bitmask value.
+	 * Instead, it overflows due to conversion of upper 32bits billions of
+	 * cycles. Timecounters are not really intended for this purpose so
+	 * they do not properly function if the overflow point isn't 2^N-1.
+	 * However, the actual SYSTIME values in question take ~138 years to
+	 * overflow. In practice this means they won't actually overflow. A
+	 * proper fix to this problem would require modification of the
+	 * timecounter delta calculations.
+	 */
+	cc.mask = CLOCKSOURCE_MASK(64);
+	cc.mult = 1;
+	cc.shift = 0;
+
+	cc.read = ngbe_ptp_read;
+	ngbe_ptp_link_speed_adjust(adapter, &cc.shift, &incval);
+	wr32(hw, NGBE_TSEC_1588_INC, NGBE_TSEC_1588_INC_IV(incval));
+
+	/* update the base incval used to calculate frequency adjustment */
+	WRITE_ONCE(adapter->base_incval, incval);
+	smp_mb();
+
+	/* need lock to prevent incorrect read while modifying cyclecounter */
+	spin_lock_irqsave(&adapter->tmreg_lock, flags);
+	memcpy(&adapter->hw_cc, &cc, sizeof(adapter->hw_cc));
+	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+}
+
+/**
+ * ngbe_ptp_reset
+ * @adapter: the ngbe private board structure
+ *
+ * When the MAC resets, all of the hardware configuration for timesync is
+ * reset. This function should be called to re-enable the device for PTP,
+ * using the last known settings. However, we do lose the current clock time,
+ * so we fallback to resetting it based on the kernel's realtime clock.
+ *
+ * This function will maintain the hwtstamp_config settings, and it retriggers
+ * the SDP output if it's enabled.
+ */
+void ngbe_ptp_reset(struct ngbe_adapter *adapter)
+{
+	unsigned long flags;
+
+	/* reset the hardware timestamping mode */
+	ngbe_ptp_set_timestamp_mode(adapter, &adapter->tstamp_config);
+	ngbe_ptp_start_cyclecounter(adapter);
+
+	spin_lock_irqsave(&adapter->tmreg_lock, flags);
+	timecounter_init(&adapter->hw_tc, &adapter->hw_cc,
+			 ktime_to_ns(ktime_get_real()));
+	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+
+	adapter->last_overflow_check = jiffies;
+}
+
+/**
+ * ngbe_ptp_create_clock
+ * @adapter: the ngbe private adapter structure
+ *
+ * This function performs setup of the user entry point function table and
+ * initalizes the PTP clock device used by userspace to access the clock-like
+ * features of the PTP core. It will be called by ngbe_ptp_init, and may
+ * re-use a previously initialized clock (such as during a suspend/resume
+ * cycle).
+ */
+static long ngbe_ptp_create_clock(struct ngbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	long err;
+
+	/* do nothing if we already have a clock device */
+	if (!IS_ERR_OR_NULL(adapter->ptp_clock))
+		return 0;
+
+	snprintf(adapter->ptp_caps.name, sizeof(adapter->ptp_caps.name),
+		 "%s", netdev->name);
+	adapter->ptp_caps.owner = THIS_MODULE;
+	adapter->ptp_caps.max_adj = 500000000; /* 10^-9s */
+	adapter->ptp_caps.n_alarm = 0;
+	adapter->ptp_caps.n_ext_ts = 0;
+	adapter->ptp_caps.n_per_out = 0;
+	adapter->ptp_caps.pps = 0;
+	adapter->ptp_caps.adjfreq = ngbe_ptp_adjfreq;
+	adapter->ptp_caps.adjtime = ngbe_ptp_adjtime;
+	adapter->ptp_caps.gettime64 = ngbe_ptp_gettime64;
+	adapter->ptp_caps.settime64 = ngbe_ptp_settime64;
+	adapter->ptp_caps.enable = ngbe_ptp_feature_enable;
+
+	adapter->ptp_clock = ptp_clock_register(&adapter->ptp_caps,
+						pci_dev_to_dev(adapter->pdev));
+	if (IS_ERR(adapter->ptp_clock)) {
+		err = PTR_ERR(adapter->ptp_clock);
+		adapter->ptp_clock = NULL;
+		e_dev_err("ptp_clock_register failed\n");
+		return err;
+	} else
+		e_dev_info("registered PHC device on %s\n", netdev->name);
+
+	/* Set the default timestamp mode to disabled here. We do this in
+	 * create_clock instead of initialization, because we don't want to
+	 * override the previous settings during a suspend/resume cycle.
+	 */
+	adapter->tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE;
+	adapter->tstamp_config.tx_type = HWTSTAMP_TX_OFF;
+
+	return 0;
+}
+
+/**
+ * ngbe_ptp_init
+ * @adapter: the ngbe private adapter structure
+ *
+ * This function performs the required steps for enabling ptp
+ * support. If ptp support has already been loaded it simply calls the
+ * cyclecounter init routine and exits.
+ */
+void ngbe_ptp_init(struct ngbe_adapter *adapter)
+{
+	/* initialize the spin lock first, since the user might call the clock
+	 * functions any time after we've initialized the ptp clock device.
+	 */
+	spin_lock_init(&adapter->tmreg_lock);
+
+	/* obtain a ptp clock device, or re-use an existing device */
+	if (ngbe_ptp_create_clock(adapter))
+		return;
+
+	/* we have a clock, so we can intialize work for timestamps now */
+	INIT_WORK(&adapter->ptp_tx_work, ngbe_ptp_tx_hwtstamp_work);
+
+	/* reset the ptp related hardware bits */
+	ngbe_ptp_reset(adapter);
+
+	/* enter the NGBE_PTP_RUNNING state */
+	set_bit(__NGBE_PTP_RUNNING, &adapter->state);
+
+	return;
+}
+
+/**
+ * ngbe_ptp_suspend - stop ptp work items
+ * @adapter: pointer to adapter struct
+ *
+ * This function suspends ptp activity, and prevents more work from being
+ * generated, but does not destroy the clock device.
+ */
+void ngbe_ptp_suspend(struct ngbe_adapter *adapter)
+{
+	/* leave the NGBE_PTP_RUNNING STATE */
+	if (!test_and_clear_bit(__NGBE_PTP_RUNNING, &adapter->state))
+		return;
+
+	adapter->flags2 &= ~NGBE_FLAG2_PTP_PPS_ENABLED;
+
+	cancel_work_sync(&adapter->ptp_tx_work);
+	ngbe_ptp_clear_tx_timestamp(adapter);
+}
+
+/**
+ * ngbe_ptp_stop - destroy the ptp_clock device
+ * @adapter: pointer to adapter struct
+ *
+ * Completely destroy the ptp_clock device, and disable all PTP related
+ * features. Intended to be run when the device is being closed.
+ */
+void ngbe_ptp_stop(struct ngbe_adapter *adapter)
+{
+	/* first, suspend ptp activity */
+	ngbe_ptp_suspend(adapter);
+
+	/* now destroy the ptp clock device */
+	if (adapter->ptp_clock) {
+		ptp_clock_unregister(adapter->ptp_clock);
+		adapter->ptp_clock = NULL;
+		e_dev_info("removed PHC on %s\n",
+					adapter->netdev->name);
+	}
+}
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_sriov.c b/drivers/net/ethernet/netswift/ngbe/ngbe_sriov.c
new file mode 100644
index 0000000000000..785e25287ad39
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_sriov.c
@@ -0,0 +1,1461 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/string.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/ipv6.h>
+
+#include "ngbe.h"
+#include "ngbe_type.h"
+#include "ngbe_sriov.h"
+
+#ifdef CONFIG_PCI_IOV
+static int __ngbe_enable_sriov(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	int num_vf_macvlans, i;
+	struct vf_macvlans *mv_list;
+
+	adapter->flags |= NGBE_FLAG_SRIOV_ENABLED;
+	e_dev_info("SR-IOV enabled with %d VFs\n", adapter->num_vfs);
+
+	/* Enable VMDq flag so device will be set in VM mode */
+	adapter->flags |= NGBE_FLAG_VMDQ_ENABLED;
+	if (!adapter->ring_feature[RING_F_VMDQ].limit)
+		adapter->ring_feature[RING_F_VMDQ].limit = 1;
+	adapter->ring_feature[RING_F_VMDQ].offset = adapter->num_vfs;
+
+	num_vf_macvlans = hw->mac.num_rar_entries -
+		(NGBE_MAX_PF_MACVLANS + 1 + adapter->num_vfs);
+
+	adapter->mv_list = mv_list = kcalloc(num_vf_macvlans,
+										sizeof(struct vf_macvlans),
+										GFP_KERNEL);
+	if (mv_list) {
+		/* Initialize list of VF macvlans */
+		INIT_LIST_HEAD(&adapter->vf_mvs.l);
+		for (i = 0; i < num_vf_macvlans; i++) {
+			mv_list->vf = -1;
+			mv_list->free = true;
+			list_add(&mv_list->l, &adapter->vf_mvs.l);
+			mv_list++;
+		}
+	}
+
+	/* Initialize default switching mode VEB */
+	wr32m(hw, NGBE_PSR_CTL,
+		NGBE_PSR_CTL_SW_EN, NGBE_PSR_CTL_SW_EN);
+
+	/* If call to enable VFs succeeded then allocate memory
+	 * for per VF control structures.
+	 */
+	adapter->vfinfo = kcalloc(adapter->num_vfs,
+			sizeof(struct vf_data_storage), GFP_KERNEL);
+	if (!adapter->vfinfo) {
+		adapter->num_vfs = 0;
+		e_dev_info("failed to allocate memory for VF Data Storage\n");
+		return -ENOMEM;
+	}
+
+	/* enable L2 switch and replication */
+	adapter->flags |= NGBE_FLAG_SRIOV_L2SWITCH_ENABLE |
+			  NGBE_FLAG_SRIOV_REPLICATION_ENABLE;
+
+	/* We do not support RSS w/ SR-IOV */
+	adapter->ring_feature[RING_F_RSS].limit = 1;
+
+	/* enable spoof checking for all VFs */
+	for (i = 0; i < adapter->num_vfs; i++) {
+		/* enable spoof checking for all VFs */
+		adapter->vfinfo[i].spoofchk_enabled = true;
+
+		/* Untrust all VFs */
+		adapter->vfinfo[i].trusted = false;
+
+		/* set the default xcast mode */
+		adapter->vfinfo[i].xcast_mode = NGBEVF_XCAST_MODE_NONE;
+	}
+
+	wr32m(hw, NGBE_CFG_PORT_CTL,
+		NGBE_CFG_PORT_CTL_NUM_VT_MASK, NGBE_CFG_PORT_CTL_NUM_VT_8);
+
+	return 0;
+}
+
+#define NGBE_BA4_ADDR(vfinfo, reg) \
+	((u8 __iomem *)((u8 *)(vfinfo)->b4_addr + (reg)))
+
+/**
+ * ngbe_get_vfs - Find and take references to all vf devices
+ * @adapter: Pointer to adapter struct
+ */
+static void ngbe_get_vfs(struct ngbe_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	u16 vendor = pdev->vendor;
+	struct pci_dev *vfdev;
+	int vf = 0;
+	u16 vf_id;
+	int pos;
+
+	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
+	if (!pos)
+		return;
+	pci_read_config_word(pdev, pos + PCI_SRIOV_VF_DID, &vf_id);
+
+	vfdev = pci_get_device(vendor, vf_id, NULL);
+	for (; vfdev; vfdev = pci_get_device(vendor, vf_id, vfdev)) {
+		struct vf_data_storage *vfinfo;
+		if (!vfdev->is_virtfn)
+			continue;
+		if (vfdev->physfn != pdev)
+			continue;
+		if (vf >= adapter->num_vfs)
+			continue;
+
+		/*pci_dev_get(vfdev);*/
+		vfinfo = &adapter->vfinfo[vf];
+		vfinfo->vfdev = vfdev;
+		vfinfo->b4_addr = ioremap(pci_resource_start(vfdev, 4), 64);
+
+		++vf;
+	}
+}
+
+/**
+ * ngbe_pet_vfs - Release references to all vf devices
+ * @adapter: Pointer to adapter struct
+ */
+static void ngbe_put_vfs(struct ngbe_adapter *adapter)
+{
+	unsigned int num_vfs = adapter->num_vfs, vf;
+
+	/* put the reference to all of the vf devices */
+	for (vf = 0; vf < num_vfs; ++vf) {
+		struct vf_data_storage *vfinfo;
+		struct pci_dev *vfdev = adapter->vfinfo[vf].vfdev;
+
+		if (!vfdev)
+			continue;
+
+		vfinfo = &adapter->vfinfo[vf];
+		iounmap(vfinfo->b4_addr);
+		vfinfo->b4_addr = NULL;
+		vfinfo->vfdev = NULL;
+		/*pci_dev_put(vfdev);*/
+	}
+}
+
+/* Note this function is called when the user wants to enable SR-IOV
+ * VFs using the now deprecated module parameter
+ */
+void ngbe_enable_sriov(struct ngbe_adapter *adapter)
+{
+	int pre_existing_vfs = 0;
+
+	pre_existing_vfs = pci_num_vf(adapter->pdev);
+	if (!pre_existing_vfs && !adapter->num_vfs)
+		return;
+
+	/* If there are pre-existing VFs then we have to force
+	 * use of that many - over ride any module parameter value.
+	 * This may result from the user unloading the PF driver
+	 * while VFs were assigned to guest VMs or because the VFs
+	 * have been created via the new PCI SR-IOV sysfs interface.
+	 */
+	if (pre_existing_vfs) {
+		adapter->num_vfs = pre_existing_vfs;
+		dev_warn(&adapter->pdev->dev,
+			 "Virtual Functions already enabled for this device -"
+			 "Please reload all VF drivers to avoid spoofed packet "
+			 "errors\n");
+	} else {
+		int err;
+		/*
+		 * The sapphire supports up to 64 VFs per physical function
+		 * but this implementation limits allocation to 63 so that
+		 * basic networking resources are still available to the
+		 * physical function.  If the user requests greater thn
+		 * 63 VFs then it is an error - reset to default of zero.
+		 */
+		adapter->num_vfs = min_t(unsigned int, adapter->num_vfs,
+					 NGBE_MAX_VFS_DRV_LIMIT);
+
+		err = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
+		if (err) {
+			e_err(probe, "Failed to enable PCI sriov: %d\n", err);
+			adapter->num_vfs = 0;
+			return;
+		}
+	}
+
+	if (!__ngbe_enable_sriov(adapter)) {
+		ngbe_get_vfs(adapter);
+		return;
+	}
+
+	/* If we have gotten to this point then there is no memory available
+	 * to manage the VF devices - print message and bail.
+	 */
+	e_err(probe, "Unable to allocate memory for VF Data Storage - "
+	      "SRIOV disabled\n");
+	ngbe_disable_sriov(adapter);
+}
+#endif /* CONFIG_PCI_IOV */
+
+int ngbe_disable_sriov(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+
+	/* set num VFs to 0 to prevent access to vfinfo */
+	adapter->num_vfs = 0;
+
+	/* put the reference to all of the vf devices */
+#ifdef CONFIG_PCI_IOV
+	ngbe_put_vfs(adapter);
+#endif
+	/* free VF control structures */
+	kfree(adapter->vfinfo);
+	adapter->vfinfo = NULL;
+
+	/* free macvlan list */
+	kfree(adapter->mv_list);
+	adapter->mv_list = NULL;
+
+	/* if SR-IOV is already disabled then there is nothing to do */
+	if (!(adapter->flags & NGBE_FLAG_SRIOV_ENABLED))
+		return 0;
+
+#ifdef CONFIG_PCI_IOV
+	/*
+	 * If our VFs are assigned we cannot shut down SR-IOV
+	 * without causing issues, so just leave the hardware
+	 * available but disabled
+	 */
+	if (pci_vfs_assigned(adapter->pdev)) {
+		e_dev_warn("Unloading driver while VFs are assigned -"
+			   "VFs will not be deallocated\n");
+		return -EPERM;
+	}
+	/* disable iov and allow time for transactions to clear */
+	pci_disable_sriov(adapter->pdev);
+#endif
+
+	/* set default pool back to 0 */
+	wr32m(hw, NGBE_PSR_VM_CTL,
+		NGBE_PSR_VM_CTL_POOL_MASK, 0);
+	NGBE_WRITE_FLUSH(hw);
+
+	adapter->ring_feature[RING_F_VMDQ].offset = 0;
+
+	/* take a breather then clean up driver data */
+	msleep(100);
+
+	adapter->flags &= ~NGBE_FLAG_SRIOV_ENABLED;
+
+	/* Disable VMDq flag so device will be set in VM mode */
+	if (adapter->ring_feature[RING_F_VMDQ].limit == 1) {
+		adapter->flags &= ~NGBE_FLAG_VMDQ_ENABLED;
+	}
+
+	return 0;
+}
+
+static int ngbe_set_vf_multicasts(struct ngbe_adapter *adapter,
+				   u32 *msgbuf, u32 vf)
+{
+	u16 entries = (msgbuf[0] & NGBE_VT_MSGINFO_MASK)
+		       >> NGBE_VT_MSGINFO_SHIFT;
+	u16 *hash_list = (u16 *)&msgbuf[1];
+	struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
+	struct ngbe_hw *hw = &adapter->hw;
+	int i;
+	u32 vector_bit;
+	u32 vector_reg;
+	u32 mta_reg;
+	u32 vmolr = rd32(hw, NGBE_PSR_VM_L2CTL(vf));
+
+	/* only so many hash values supported */
+	entries = min(entries, (u16)NGBE_MAX_VF_MC_ENTRIES);
+
+	/* salt away the number of multi cast addresses assigned
+	 * to this VF for later use to restore when the PF multi cast
+	 * list changes
+	 */
+	vfinfo->num_vf_mc_hashes = entries;
+
+	/* VFs are limited to using the MTA hash table for their multicast
+	 * addresses */
+	for (i = 0; i < entries; i++)
+		vfinfo->vf_mc_hashes[i] = hash_list[i];
+
+	for (i = 0; i < vfinfo->num_vf_mc_hashes; i++) {
+		vector_reg = (vfinfo->vf_mc_hashes[i] >> 5) & 0x7F;
+		vector_bit = vfinfo->vf_mc_hashes[i] & 0x1F;
+		/* errata 5: maintain a copy of the register table conf */
+		mta_reg = hw->mac.mta_shadow[vector_reg];
+		mta_reg |= (1 << vector_bit);
+		hw->mac.mta_shadow[vector_reg] = mta_reg;
+		wr32(hw, NGBE_PSR_MC_TBL(vector_reg), mta_reg);
+	}
+	vmolr |= NGBE_PSR_VM_L2CTL_ROMPE;
+	wr32(hw, NGBE_PSR_VM_L2CTL(vf), vmolr);
+
+	return 0;
+}
+
+void ngbe_restore_vf_multicasts(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	struct vf_data_storage *vfinfo;
+	u32 i, j;
+	u32 vector_bit;
+	u32 vector_reg;
+
+	for (i = 0; i < adapter->num_vfs; i++) {
+		u32 vmolr = rd32(hw, NGBE_PSR_VM_L2CTL(i));
+		vfinfo = &adapter->vfinfo[i];
+		for (j = 0; j < vfinfo->num_vf_mc_hashes; j++) {
+			hw->addr_ctrl.mta_in_use++;
+			vector_reg = (vfinfo->vf_mc_hashes[j] >> 5) & 0x7F;
+			vector_bit = vfinfo->vf_mc_hashes[j] & 0x1F;
+			wr32m(hw, NGBE_PSR_MC_TBL(vector_reg),
+				1 << vector_bit, 1 << vector_bit);
+			/* errata 5: maintain a copy of the reg table conf */
+			hw->mac.mta_shadow[vector_reg] |= (1 << vector_bit);
+		}
+		if (vfinfo->num_vf_mc_hashes)
+			vmolr |= NGBE_PSR_VM_L2CTL_ROMPE;
+		else
+			vmolr &= ~NGBE_PSR_VM_L2CTL_ROMPE;
+		wr32(hw, NGBE_PSR_VM_L2CTL(i), vmolr);
+	}
+
+	/* Restore any VF macvlans */
+	ngbe_full_sync_mac_table(adapter);
+}
+
+int ngbe_set_vf_vlan(struct ngbe_adapter *adapter, int add, int vid, u16 vf)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+
+	/* VLAN 0 is a special case, don't allow it to be removed */
+	if (!vid && !add)
+		return 0;
+
+	return TCALL(hw, mac.ops.set_vfta, vid, vf, (bool)add);
+}
+
+static int ngbe_set_vf_lpe(struct ngbe_adapter *adapter, u32 max_frame,
+			    u32 vf)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 max_frs, reg_val;
+
+	/*
+	 * For sapphire we have to keep all PFs and VFs operating with
+	 * the same max_frame value in order to avoid sending an oversize
+	 * frame to a VF.  In order to guarantee this is handled correctly
+	 * for all cases we have several special exceptions to take into
+	 * account before we can enable the VF for receive
+	 */
+	struct net_device *dev = adapter->netdev;
+	int pf_max_frame = dev->mtu + ETH_HLEN;
+	u32 vf_shift, vfre;
+	s32 err = 0;
+
+	switch (adapter->vfinfo[vf].vf_api) {
+	case ngbe_mbox_api_11:
+	case ngbe_mbox_api_12:
+	case ngbe_mbox_api_13:
+		/*
+		 * Version 1.1 supports jumbo frames on VFs if PF has
+		 * jumbo frames enabled which means legacy VFs are
+		 * disabled
+		 */
+		if (pf_max_frame > ETH_FRAME_LEN)
+			break;
+		/* fall through */
+	default:
+		/*
+		 * If the PF or VF are running w/ jumbo frames enabled
+		 * we need to shut down the VF Rx path as we cannot
+		 * support jumbo frames on legacy VFs
+		 */
+		if ((pf_max_frame > ETH_FRAME_LEN) ||
+		    (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)))
+			err = -EINVAL;
+		break;
+	}
+
+	/* determine VF receive enable location */
+	vf_shift = vf;
+
+	/* enable or disable receive depending on error */
+	vfre = rd32(hw, NGBE_RDM_POOL_RE);
+	if (err)
+		vfre &= ~(1 << vf_shift);
+	else
+		vfre |= 1 << vf_shift;
+	wr32(hw, NGBE_RDM_POOL_RE, vfre);
+
+	if (err) {
+		e_err(drv, "VF max_frame %d out of range\n", max_frame);
+		return err;
+	}
+
+	/* pull current max frame size from hardware */
+	max_frs = DIV_ROUND_UP(max_frame, 1024);
+	reg_val = rd32(hw, NGBE_MAC_WDG_TIMEOUT) &
+		NGBE_MAC_WDG_TIMEOUT_WTO_MASK;
+	if (max_frs > (reg_val + NGBE_MAC_WDG_TIMEOUT_WTO_DELTA)) {
+		wr32(hw, NGBE_MAC_WDG_TIMEOUT,
+			max_frs - NGBE_MAC_WDG_TIMEOUT_WTO_DELTA);
+	}
+
+	e_info(hw, "VF requests change max MTU to %d\n", max_frame);
+
+	return 0;
+}
+
+void ngbe_set_vmolr(struct ngbe_hw *hw, u16 vf, bool aupe)
+{
+	u32 vmolr = rd32(hw, NGBE_PSR_VM_L2CTL(vf));
+	vmolr |=  NGBE_PSR_VM_L2CTL_BAM;
+	if (aupe)
+		vmolr |= NGBE_PSR_VM_L2CTL_AUPE;
+	else
+		vmolr &= ~NGBE_PSR_VM_L2CTL_AUPE;
+	wr32(hw, NGBE_PSR_VM_L2CTL(vf), vmolr);
+}
+
+static void ngbe_set_vmvir(struct ngbe_adapter *adapter,
+			    u16 vid, u16 qos, u16 vf)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 vmvir = vid | (qos << VLAN_PRIO_SHIFT) |
+		NGBE_TDM_VLAN_INS_VLANA_DEFAULT;
+
+	wr32(hw, NGBE_TDM_VLAN_INS(vf), vmvir);
+}
+
+static void ngbe_clear_vmvir(struct ngbe_adapter *adapter, u32 vf)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+
+	wr32(hw, NGBE_TDM_VLAN_INS(vf), 0);
+}
+
+static inline void ngbe_vf_reset_event(struct ngbe_adapter *adapter, u16 vf)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
+	u8 num_tcs = netdev_get_num_tc(adapter->netdev);
+
+	/* add PF assigned VLAN or VLAN 0 */
+	ngbe_set_vf_vlan(adapter, true, vfinfo->pf_vlan, vf);
+
+	/* reset offloads to defaults */
+	ngbe_set_vmolr(hw, vf, !vfinfo->pf_vlan);
+
+	/* set outgoing tags for VFs */
+	if (!vfinfo->pf_vlan && !vfinfo->pf_qos && !num_tcs) {
+		ngbe_clear_vmvir(adapter, vf);
+	} else {
+		if (vfinfo->pf_qos || !num_tcs)
+			ngbe_set_vmvir(adapter, vfinfo->pf_vlan,
+					vfinfo->pf_qos, vf);
+		else
+			ngbe_set_vmvir(adapter, vfinfo->pf_vlan,
+					adapter->default_up, vf);
+
+		if (vfinfo->spoofchk_enabled)
+			TCALL(hw, mac.ops.set_vlan_anti_spoofing, true, vf);
+	}
+
+	/* reset multicast table array for vf */
+	adapter->vfinfo[vf].num_vf_mc_hashes = 0;
+
+	/* Flush and reset the mta with the new values */
+	ngbe_set_rx_mode(adapter->netdev);
+
+	ngbe_del_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf);
+
+	/* reset VF api back to unknown */
+	adapter->vfinfo[vf].vf_api = ngbe_mbox_api_10;
+}
+
+int ngbe_set_vf_mac(struct ngbe_adapter *adapter,
+		     u16 vf, unsigned char *mac_addr)
+{
+	s32 retval = 0;
+	ngbe_del_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf);
+	retval = ngbe_add_mac_filter(adapter, mac_addr, vf);
+	if (retval >= 0)
+		memcpy(adapter->vfinfo[vf].vf_mac_addresses, mac_addr, ETH_ALEN);
+	else
+		memset(adapter->vfinfo[vf].vf_mac_addresses, 0, ETH_ALEN);
+
+	return retval;
+}
+
+static int ngbe_negotiate_vf_api(struct ngbe_adapter *adapter,
+				  u32 *msgbuf, u32 vf)
+{
+	int api = msgbuf[1];
+
+	switch (api) {
+	case ngbe_mbox_api_10:
+	case ngbe_mbox_api_11:
+	case ngbe_mbox_api_12:
+	case ngbe_mbox_api_13:
+		adapter->vfinfo[vf].vf_api = api;
+		return 0;
+	default:
+		break;
+	}
+
+	e_info(drv, "VF %d requested invalid api version %u\n", vf, api);
+
+	return -1;
+}
+
+static int ngbe_get_vf_queues(struct ngbe_adapter *adapter,
+			       u32 *msgbuf, u32 vf)
+{
+	struct net_device *dev = adapter->netdev;
+	unsigned int default_tc = 0;
+	u8 num_tcs = netdev_get_num_tc(dev);
+
+	/* verify the PF is supporting the correct APIs */
+	switch (adapter->vfinfo[vf].vf_api) {
+	case ngbe_mbox_api_20:
+	case ngbe_mbox_api_11:
+		break;
+	default:
+		return -1;
+	}
+
+	/* only allow 1 Tx queue for bandwidth limiting */
+	msgbuf[NGBE_VF_TX_QUEUES] = 1;
+	msgbuf[NGBE_VF_RX_QUEUES] = 1;
+
+	/* notify VF of need for VLAN tag stripping, and correct queue */
+	if (num_tcs)
+		msgbuf[NGBE_VF_TRANS_VLAN] = num_tcs;
+	else if (adapter->vfinfo[vf].pf_vlan || adapter->vfinfo[vf].pf_qos)
+		msgbuf[NGBE_VF_TRANS_VLAN] = 1;
+	else
+		msgbuf[NGBE_VF_TRANS_VLAN] = 0;
+
+	/* notify VF of default queue */
+	msgbuf[NGBE_VF_DEF_QUEUE] = default_tc;
+
+	return 0;
+}
+
+static int ngbe_get_vf_link_status(struct ngbe_adapter *adapter,
+				  u32 *msgbuf, u32 vf)
+{
+	/* verify the PF is supporting the correct APIs */
+	switch (adapter->vfinfo[vf].vf_api) {
+	case ngbe_mbox_api_11:
+	case ngbe_mbox_api_12:
+	case ngbe_mbox_api_13:
+		break;
+	default:
+		return -1;
+	}
+
+	if (adapter->link_up)
+		msgbuf[1] = NGBE_VF_STATUS_LINKUP;
+	else
+		msgbuf[1] = 0;
+
+	return 0;
+}
+
+static int ngbe_set_vf_macvlan(struct ngbe_adapter *adapter,
+				u16 vf, int index, unsigned char *mac_addr)
+{
+	struct list_head *pos;
+	struct vf_macvlans *entry;
+	s32 retval = 0;
+
+	if (index <= 1) {
+		list_for_each(pos, &adapter->vf_mvs.l) {
+			entry = list_entry(pos, struct vf_macvlans, l);
+			if (entry->vf == vf) {
+				entry->vf = -1;
+				entry->free = true;
+				entry->is_macvlan = false;
+				ngbe_del_mac_filter(adapter,
+									entry->vf_macvlan, vf);
+			}
+		}
+	}
+
+	/*
+	 * If index was zero then we were asked to clear the uc list
+	 * for the VF.  We're done.
+	 */
+	if (!index)
+		return 0;
+
+	entry = NULL;
+
+	list_for_each(pos, &adapter->vf_mvs.l) {
+		entry = list_entry(pos, struct vf_macvlans, l);
+		if (entry->free)
+			break;
+	}
+
+	/*
+	 * If we traversed the entire list and didn't find a free entry
+	 * then we're out of space on the RAR table.  Also entry may
+	 * be NULL because the original memory allocation for the list
+	 * failed, which is not fatal but does mean we can't support
+	 * VF requests for MACVLAN because we couldn't allocate
+	 * memory for the list manangbeent required.
+	 */
+	if (!entry || !entry->free)
+		return -ENOSPC;
+
+	retval = ngbe_add_mac_filter(adapter, mac_addr, vf);
+	if (retval >= 0) {
+		entry->free = false;
+		entry->is_macvlan = true;
+		entry->vf = vf;
+		memcpy(entry->vf_macvlan, mac_addr, ETH_ALEN);
+	}
+
+	return retval;
+}
+
+#ifdef CONFIG_PCI_IOV
+int ngbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
+{
+	unsigned char vf_mac_addr[6];
+	struct ngbe_adapter *adapter = pci_get_drvdata(pdev);
+	unsigned int vfn = (event_mask & 0x7);
+	bool enable = ((event_mask & 0x10000000U) != 0);
+
+	if (enable) {
+		memset(vf_mac_addr, 0, ETH_ALEN);
+		memcpy(adapter->vfinfo[vfn].vf_mac_addresses, vf_mac_addr, 6);
+	}
+
+	return 0;
+}
+#endif /* CONFIG_PCI_IOV */
+
+static inline void ngbe_write_qde(struct ngbe_adapter *adapter, u32 vf,
+								u32 qde)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 q_per_pool = 1;
+	u32 reg = 0;
+	u32 i = vf * q_per_pool;
+
+	reg = rd32(hw, NGBE_RDM_PF_QDE);
+	reg |= qde << i;
+
+	wr32(hw, NGBE_RDM_PF_QDE, reg);
+
+}
+
+static inline void ngbe_write_hide_vlan(struct ngbe_adapter *adapter, u32 vf,
+				   u32 hide_vlan)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 q_per_pool = 1;
+	u32 reg = 0;
+	u32 i = vf * q_per_pool;
+	reg = rd32(hw, NGBE_RDM_PF_HIDE);
+
+	if (hide_vlan == 1)
+		reg |= hide_vlan << i;
+	else
+		reg &= hide_vlan << i;
+
+	wr32(hw, NGBE_RDM_PF_HIDE, reg);
+}
+
+static int ngbe_vf_reset_msg(struct ngbe_adapter *adapter, u16 vf)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
+	u32 reg, vf_shift;
+	u32 msgbuf[4] = {0, 0, 0, 0};
+	u8 *addr = (u8 *)(&msgbuf[1]);
+	struct net_device *dev = adapter->netdev;
+	int pf_max_frame;
+
+	e_info(probe, "VF Reset msg received from vf %d\n", vf);
+
+	/* reset the filters for the device */
+	ngbe_vf_reset_event(adapter, vf);
+
+	/* set vf mac address */
+	if (!is_zero_ether_addr(vf_mac))
+		ngbe_set_vf_mac(adapter, vf, vf_mac);
+
+	vf_shift = vf;
+
+	/* enable transmit for vf */
+	wr32m(hw, NGBE_TDM_POOL_TE,
+		1 << vf, 1 << vf);
+
+	/* force drop enable for all VF Rx queues */
+	ngbe_write_qde(adapter, vf, 1);
+
+	/* enable receive for vf */
+	reg = rd32(hw, NGBE_RDM_POOL_RE);
+	reg |= 1 << vf_shift;
+
+	pf_max_frame = dev->mtu + ETH_HLEN;
+
+	if (pf_max_frame > ETH_FRAME_LEN)
+		reg &= ~(1 << vf_shift);
+	wr32(hw, NGBE_RDM_POOL_RE, reg);
+
+	/* enable VF mailbox for further messages */
+	adapter->vfinfo[vf].clear_to_send = true;
+
+	/* reply to reset with ack and vf mac address */
+	msgbuf[0] = NGBE_VF_RESET;
+	if (!is_zero_ether_addr(vf_mac)) {
+		msgbuf[0] |= NGBE_VT_MSGTYPE_ACK;
+		memcpy(addr, vf_mac, ETH_ALEN);
+	} else {
+		msgbuf[0] |= NGBE_VT_MSGTYPE_NACK;
+		dev_warn(pci_dev_to_dev(adapter->pdev),
+			 "VF %d has no MAC address assigned, you may have to "
+			 "assign one manually\n", vf);
+	}
+
+	/*
+	 * Piggyback the multicast filter type so VF can compute the
+	 * correct vectors
+	 */
+	msgbuf[3] = hw->mac.mc_filter_type;
+	ngbe_write_mbx(hw, msgbuf, NGBE_VF_PERMADDR_MSG_LEN, vf);
+
+	return 0;
+}
+
+static int ngbe_set_vf_mac_addr(struct ngbe_adapter *adapter,
+				 u32 *msgbuf, u16 vf)
+{
+	u8 *new_mac = ((u8 *)(&msgbuf[1]));
+
+	if (!is_valid_ether_addr(new_mac)) {
+		e_warn(drv, "VF %d attempted to set invalid mac\n", vf);
+		return -1;
+	}
+
+	if (adapter->vfinfo[vf].pf_set_mac &&
+	    memcmp(adapter->vfinfo[vf].vf_mac_addresses, new_mac,
+		   ETH_ALEN)) {
+		u8 *pm = adapter->vfinfo[vf].vf_mac_addresses;
+		e_warn(drv,
+				"VF %d attempted to set a new MAC address but it already "
+				"has an administratively set MAC address "
+				"%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
+				vf, pm[0], pm[1], pm[2], pm[3], pm[4], pm[5]);
+		e_warn(drv, "Check the VF driver and if it is not using the "
+				"correct MAC address you may need to reload the VF "
+				"driver\n");
+		return -1;
+	}
+	return ngbe_set_vf_mac(adapter, vf, new_mac) < 0;
+}
+
+#ifdef CONFIG_PCI_IOV
+static int ngbe_find_vlvf_entry(struct ngbe_hw *hw, u32 vlan)
+{
+	u32 vlvf;
+	s32 regindex;
+
+	/* short cut the special case */
+	if (vlan == 0)
+		return 0;
+
+	/* Search for the vlan id in the VLVF entries */
+	for (regindex = 1; regindex < NGBE_PSR_VLAN_SWC_ENTRIES; regindex++) {
+		wr32(hw, NGBE_PSR_VLAN_SWC_IDX, regindex);
+		vlvf = rd32(hw, NGBE_PSR_VLAN_SWC);
+		if ((vlvf & VLAN_VID_MASK) == vlan)
+			break;
+	}
+
+	/* Return a negative value if not found */
+	if (regindex >= NGBE_PSR_VLAN_SWC_ENTRIES)
+		regindex = -1;
+
+	return regindex;
+}
+#endif /* CONFIG_PCI_IOV */
+
+static int ngbe_set_vf_vlan_msg(struct ngbe_adapter *adapter,
+				 u32 *msgbuf, u16 vf)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	int add = (msgbuf[0] & NGBE_VT_MSGINFO_MASK) >> NGBE_VT_MSGINFO_SHIFT;
+	int vid = (msgbuf[1] & NGBE_PSR_VLAN_SWC_VLANID_MASK);
+	int err;
+	u8 tcs = netdev_get_num_tc(adapter->netdev);
+
+	if (adapter->vfinfo[vf].pf_vlan || tcs) {
+		e_warn(drv,
+		       "VF %d attempted to override administratively set VLAN "
+		       "configuration\n"
+		       "Reload the VF driver to resume operations\n",
+		       vf);
+		return -1;
+	}
+
+	if (add)
+		adapter->vfinfo[vf].vlan_count++;
+	else if (adapter->vfinfo[vf].vlan_count)
+		adapter->vfinfo[vf].vlan_count--;
+
+	/* in case of promiscuous mode any VLAN filter set for a VF must
+	 * also have the PF pool added to it.
+	 */
+	if (add && adapter->netdev->flags & IFF_PROMISC)
+		err = ngbe_set_vf_vlan(adapter, add, vid, VMDQ_P(0));
+
+	err = ngbe_set_vf_vlan(adapter, add, vid, vf);
+	if (!err && adapter->vfinfo[vf].spoofchk_enabled)
+		TCALL(hw, mac.ops.set_vlan_anti_spoofing, true, vf);
+
+#ifdef CONFIG_PCI_IOV
+	/* Go through all the checks to see if the VLAN filter should
+	 * be wiped completely.
+	 */
+	if (!add && adapter->netdev->flags & IFF_PROMISC) {
+		u32 bits = 0, vlvf;
+		s32 reg_ndx;
+
+		reg_ndx = ngbe_find_vlvf_entry(hw, vid);
+		if (reg_ndx < 0)
+			goto out;
+		wr32(hw, NGBE_PSR_VLAN_SWC_IDX, reg_ndx);
+		vlvf = rd32(hw, NGBE_PSR_VLAN_SWC);
+		/* See if any other pools are set for this VLAN filter
+		 * entry other than the PF.
+		 */
+		if (VMDQ_P(0) < 32) {
+			bits = rd32(hw, NGBE_PSR_VLAN_SWC_VM_L);
+			bits &= ~(1 << VMDQ_P(0));
+		} else {
+			bits &= ~(1 << (VMDQ_P(0) - 32));
+			bits |= rd32(hw, NGBE_PSR_VLAN_SWC_VM_L);
+		}
+
+		/* If the filter was removed then ensure PF pool bit
+		 * is cleared if the PF only added itself to the pool
+		 * because the PF is in promiscuous mode.
+		 */
+		if ((vlvf & VLAN_VID_MASK) == vid &&
+			!test_bit(vid, adapter->active_vlans) &&
+			!bits)
+			ngbe_set_vf_vlan(adapter, add, vid, VMDQ_P(0));
+	}
+
+out:
+#endif
+	return err;
+}
+
+static int ngbe_set_vf_macvlan_msg(struct ngbe_adapter *adapter,
+				    u32 *msgbuf, u16 vf)
+{
+	u8 *new_mac = ((u8 *)(&msgbuf[1]));
+	int index = (msgbuf[0] & NGBE_VT_MSGINFO_MASK) >>
+			NGBE_VT_MSGINFO_SHIFT;
+	int err;
+
+	if (adapter->vfinfo[vf].pf_set_mac && index > 0) {
+		e_warn(drv,
+			"VF %d requested MACVLAN filter but is administratively denied\n",
+			vf);
+		return -1;
+	}
+
+	/* An non-zero index indicates the VF is setting a filter */
+	if (index) {
+		if (!is_valid_ether_addr(new_mac)) {
+			e_warn(drv, "VF %d attempted to set invalid mac\n", vf);
+			return -1;
+		}
+
+		/*
+		 * If the VF is allowed to set MAC filters then turn off
+		 * anti-spoofing to avoid false positives.
+		 */
+		if (adapter->vfinfo[vf].spoofchk_enabled)
+			ngbe_ndo_set_vf_spoofchk(adapter->netdev, vf, false);
+	}
+
+	err = ngbe_set_vf_macvlan(adapter, vf, index, new_mac);
+	if (err == -ENOSPC)
+		e_warn(drv,
+		       "VF %d has requested a MACVLAN filter but there is no "
+		       "space for it\n",
+		       vf);
+
+	return err < 0;
+}
+
+static int ngbe_update_vf_xcast_mode(struct ngbe_adapter *adapter,
+				      u32 *msgbuf, u32 vf)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	int xcast_mode = msgbuf[1];
+	u32 vmolr, fctrl, disable, enable;
+
+	/* verify the PF is supporting the correct APIs */
+	switch (adapter->vfinfo[vf].vf_api) {
+	case ngbe_mbox_api_12:
+		/* promisc introduced in 1.3 version */
+		if (xcast_mode == NGBEVF_XCAST_MODE_PROMISC)
+			return -EOPNOTSUPP;
+		/* Fall threw */
+	case ngbe_mbox_api_13:
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	if (adapter->vfinfo[vf].xcast_mode == xcast_mode)
+		goto out;
+
+	switch (xcast_mode) {
+	case NGBEVF_XCAST_MODE_NONE:
+		disable = NGBE_PSR_VM_L2CTL_BAM |
+				NGBE_PSR_VM_L2CTL_ROMPE |
+				NGBE_PSR_VM_L2CTL_MPE |
+				NGBE_PSR_VM_L2CTL_UPE |
+				NGBE_PSR_VM_L2CTL_VPE;
+		enable = 0;
+		break;
+	case NGBEVF_XCAST_MODE_MULTI:
+		disable = NGBE_PSR_VM_L2CTL_MPE |
+				NGBE_PSR_VM_L2CTL_UPE |
+				NGBE_PSR_VM_L2CTL_VPE;
+		enable = NGBE_PSR_VM_L2CTL_BAM |
+				NGBE_PSR_VM_L2CTL_ROMPE;
+		break;
+	case NGBEVF_XCAST_MODE_ALLMULTI:
+		disable = NGBE_PSR_VM_L2CTL_UPE |
+				NGBE_PSR_VM_L2CTL_VPE;
+		enable = NGBE_PSR_VM_L2CTL_BAM |
+				NGBE_PSR_VM_L2CTL_ROMPE |
+				NGBE_PSR_VM_L2CTL_MPE;
+		break;
+	case NGBEVF_XCAST_MODE_PROMISC:
+		fctrl = rd32(hw, NGBE_PSR_CTL);
+		if (!(fctrl & NGBE_PSR_CTL_UPE)) {
+			/* VF promisc requires PF in promisc */
+			e_warn(drv,
+					"Enabling VF promisc requires PF in promisc\n");
+			return -EPERM;
+		}
+		disable = 0;
+		enable = NGBE_PSR_VM_L2CTL_BAM |
+				NGBE_PSR_VM_L2CTL_ROMPE |
+				NGBE_PSR_VM_L2CTL_MPE |
+				NGBE_PSR_VM_L2CTL_UPE |
+				NGBE_PSR_VM_L2CTL_VPE;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	vmolr = rd32(hw, NGBE_PSR_VM_L2CTL(vf));
+	vmolr &= ~disable;
+	vmolr |= enable;
+	wr32(hw, NGBE_PSR_VM_L2CTL(vf), vmolr);
+
+	adapter->vfinfo[vf].xcast_mode = xcast_mode;
+
+out:
+	msgbuf[1] = xcast_mode;
+
+	return 0;
+}
+
+static int ngbe_rcv_msg_from_vf(struct ngbe_adapter *adapter, u16 vf)
+{
+	u16 mbx_size = NGBE_VXMAILBOX_SIZE;
+	u32 msgbuf[NGBE_VXMAILBOX_SIZE];
+	struct ngbe_hw *hw = &adapter->hw;
+	s32 retval;
+
+	retval = ngbe_read_mbx(hw, msgbuf, mbx_size, vf);
+
+	if (retval) {
+		pr_err("Error receiving message from VF\n");
+		return retval;
+	}
+
+	/* this is a message we already processed, do nothing */
+	if (msgbuf[0] & (NGBE_VT_MSGTYPE_ACK | NGBE_VT_MSGTYPE_NACK))
+		return retval;
+
+	/* flush the ack before we write any messages back */
+	NGBE_WRITE_FLUSH(hw);
+
+	if (msgbuf[0] == NGBE_VF_RESET)
+		return ngbe_vf_reset_msg(adapter, vf);
+
+	/*
+	 * until the vf completes a virtual function reset it should not be
+	 * allowed to start any configuration.
+	 */
+
+	if (!adapter->vfinfo[vf].clear_to_send) {
+		msgbuf[0] |= NGBE_VT_MSGTYPE_NACK;
+		ngbe_write_mbx(hw, msgbuf, 1, vf);
+		return retval;
+	}
+
+	switch ((msgbuf[0] & 0xFFFF)) {
+	case NGBE_VF_SET_MAC_ADDR:
+		retval = ngbe_set_vf_mac_addr(adapter, msgbuf, vf);
+		break;
+	case NGBE_VF_SET_MULTICAST:
+		retval = ngbe_set_vf_multicasts(adapter, msgbuf, vf);
+		break;
+	case NGBE_VF_SET_VLAN:
+		retval = ngbe_set_vf_vlan_msg(adapter, msgbuf, vf);
+		break;
+	case NGBE_VF_SET_LPE:
+		if (msgbuf[1] > NGBE_MAX_JUMBO_FRAME_SIZE) {
+			e_err(drv, "VF max_frame %d exceed MAX_JUMBO_FRAME_SIZE\n", msgbuf[1]);
+			return -EINVAL;
+		}
+		retval = ngbe_set_vf_lpe(adapter, msgbuf[1], vf);
+		break;
+	case NGBE_VF_SET_MACVLAN:
+		retval = ngbe_set_vf_macvlan_msg(adapter, msgbuf, vf);
+		break;
+	case NGBE_VF_API_NEGOTIATE:
+		retval = ngbe_negotiate_vf_api(adapter, msgbuf, vf);
+		break;
+	case NGBE_VF_GET_QUEUES:
+		retval = ngbe_get_vf_queues(adapter, msgbuf, vf);
+		break;
+	case NGBE_VF_UPDATE_XCAST_MODE:
+		retval = ngbe_update_vf_xcast_mode(adapter, msgbuf, vf);
+		break;
+	case NGBE_VF_GET_LINK_STATUS:
+		retval = ngbe_get_vf_link_status(adapter, msgbuf, vf);
+		break;
+	case NGBE_VF_BACKUP:
+		break;
+	default:
+		e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
+		retval = NGBE_ERR_MBX;
+		break;
+	}
+
+	/* notify the VF of the results of what it sent us */
+	if (retval)
+		msgbuf[0] |= NGBE_VT_MSGTYPE_NACK;
+	else
+		msgbuf[0] |= NGBE_VT_MSGTYPE_ACK;
+
+	msgbuf[0] |= NGBE_VT_MSGTYPE_CTS;
+
+	ngbe_write_mbx(hw, msgbuf, mbx_size, vf);
+
+	return retval;
+}
+
+static void ngbe_rcv_ack_from_vf(struct ngbe_adapter *adapter, u16 vf)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 msg = NGBE_VT_MSGTYPE_NACK;
+
+	/* if device isn't clear to send it shouldn't be reading either */
+	if (!adapter->vfinfo[vf].clear_to_send)
+		ngbe_write_mbx(hw, &msg, 1, vf);
+}
+
+void ngbe_msg_task(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u16 vf;
+
+	for (vf = 0; vf < adapter->num_vfs; vf++) {
+		/* process any reset requests */
+		if (!ngbe_check_for_rst(hw, vf))
+			ngbe_vf_reset_event(adapter, vf);
+
+		/* process any messages pending */
+		if (!ngbe_check_for_msg(hw, vf))
+			ngbe_rcv_msg_from_vf(adapter, vf);
+
+		/* process any acks */
+		if (!ngbe_check_for_ack(hw, vf))
+			ngbe_rcv_ack_from_vf(adapter, vf);
+	}
+}
+
+void ngbe_disable_tx_rx(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+
+	/* disable transmit and receive for all vfs */
+	wr32(hw, NGBE_TDM_POOL_TE, 0);
+	wr32(hw, NGBE_RDM_POOL_RE, 0);
+}
+
+static inline void ngbe_ping_vf(struct ngbe_adapter *adapter, int vf)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 ping;
+
+	ping = NGBE_PF_CONTROL_MSG;
+	if (adapter->vfinfo[vf].clear_to_send)
+		ping |= NGBE_VT_MSGTYPE_CTS;
+	ngbe_write_mbx(hw, &ping, 1, vf);
+}
+
+void ngbe_ping_all_vfs(struct ngbe_adapter *adapter)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 ping;
+	u16 i;
+
+	for (i = 0 ; i < adapter->num_vfs; i++) {
+		ping = NGBE_PF_CONTROL_MSG;
+		if (adapter->vfinfo[i].clear_to_send)
+			ping |= NGBE_VT_MSGTYPE_CTS;
+		ngbe_write_mbx(hw, &ping, 1, i);
+	}
+}
+
+int ngbe_ndo_set_vf_trust(struct net_device *netdev, int vf, bool setting)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+
+	if (vf >= adapter->num_vfs)
+		return -EINVAL;
+
+	/* nothing to do */
+	if (adapter->vfinfo[vf].trusted == setting)
+		return 0;
+
+	adapter->vfinfo[vf].trusted = setting;
+
+	/* reset VF to reconfigure features */
+	adapter->vfinfo[vf].clear_to_send = false;
+	ngbe_ping_vf(adapter, vf);
+
+	e_info(drv, "VF %u is %strusted\n", vf, setting ? "" : "not ");
+
+	return 0;
+}
+
+#ifdef CONFIG_PCI_IOV
+static int ngbe_pci_sriov_enable(struct pci_dev *dev, int num_vfs)
+{
+	struct ngbe_adapter *adapter = pci_get_drvdata(dev);
+	int err = 0;
+	int i;
+	int pre_existing_vfs = pci_num_vf(dev);
+
+	if (!(adapter->flags & NGBE_FLAG_SRIOV_CAPABLE)) {
+		e_dev_warn("SRIOV not supported on this device\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (pre_existing_vfs && pre_existing_vfs != num_vfs)
+		err = ngbe_disable_sriov(adapter);
+	else if (pre_existing_vfs && pre_existing_vfs == num_vfs)
+		goto out;
+
+	if (err)
+		goto err_out;
+
+	/* While the SR-IOV capability structure reports total VFs to be
+	 * 8 we limit the actual number that can be allocated to 7 so
+	 * that some transmit/receive resources can be reserved to the
+	 * PF.  The PCI bus driver already checks for other values out of
+	 * range.
+	 */
+	if ((num_vfs + adapter->num_vmdqs) > NGBE_MAX_VF_FUNCTIONS) {
+		err = -EPERM;
+		goto err_out;
+	}
+
+	adapter->num_vfs = num_vfs;
+
+	err = __ngbe_enable_sriov(adapter);
+	if (err)
+		goto err_out;
+
+	for (i = 0; i < adapter->num_vfs; i++)
+		ngbe_vf_configuration(dev, (i | 0x10000000));
+
+	err = pci_enable_sriov(dev, num_vfs);
+	if (err) {
+		e_dev_warn("Failed to enable PCI sriov: %d\n", err);
+		goto err_out;
+	}
+	ngbe_get_vfs(adapter);
+	msleep(100);
+	ngbe_sriov_reinit(adapter);
+out:
+	return num_vfs;
+err_out:
+	return err;
+}
+
+static int ngbe_pci_sriov_disable(struct pci_dev *dev)
+{
+	struct ngbe_adapter *adapter = pci_get_drvdata(dev);
+	int err;
+	u32 current_flags = adapter->flags;
+
+	err = ngbe_disable_sriov(adapter);
+
+	/* Only reinit if no error and state changed */
+	if (!err && current_flags != adapter->flags)
+		ngbe_sriov_reinit(adapter);
+
+	return err;
+}
+#endif
+
+int ngbe_pci_sriov_configure(struct pci_dev __maybe_unused *dev,
+							 int __maybe_unused num_vfs)
+{
+#ifdef CONFIG_PCI_IOV
+	if (num_vfs == 0)
+		return ngbe_pci_sriov_disable(dev);
+	else
+		return ngbe_pci_sriov_enable(dev, num_vfs);
+#endif
+	return 0;
+}
+
+int ngbe_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
+{
+	s32 retval = 0;
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+
+	if (!is_valid_ether_addr(mac) || (vf >= adapter->num_vfs))
+		return -EINVAL;
+
+	dev_info(pci_dev_to_dev(adapter->pdev),
+		"setting MAC %pM on VF %d\n", mac, vf);
+	dev_info(pci_dev_to_dev(adapter->pdev),
+		"Reload the VF driver to make this change effective.\n");
+	retval = ngbe_set_vf_mac(adapter, vf, mac);
+	if (retval >= 0) {
+		adapter->vfinfo[vf].pf_set_mac = true;
+		if (test_bit(__NGBE_DOWN, &adapter->state)) {
+			dev_warn(pci_dev_to_dev(adapter->pdev),
+				"The VF MAC address has been set, but the PF "
+				"device is not up.\n");
+			dev_warn(pci_dev_to_dev(adapter->pdev),
+				"Bring the PF device up before attempting to "
+				"use the VF device.\n");
+		}
+	} else {
+		dev_warn(pci_dev_to_dev(adapter->pdev),
+			"The VF MAC address was NOT set due to invalid or "
+			"duplicate MAC address.\n");
+	}
+
+	return retval;
+}
+
+static int ngbe_enable_port_vlan(struct ngbe_adapter *adapter,
+				   int vf, u16 vlan, u8 qos)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	int err;
+
+	err = ngbe_set_vf_vlan(adapter, true, vlan, vf);
+	if (err)
+		goto out;
+	ngbe_set_vmvir(adapter, vlan, qos, vf);
+	ngbe_set_vmolr(hw, vf, false);
+	if (adapter->vfinfo[vf].spoofchk_enabled)
+		TCALL(hw, mac.ops.set_vlan_anti_spoofing, true, vf);
+	adapter->vfinfo[vf].vlan_count++;
+	/* enable hide vlan */
+	ngbe_write_qde(adapter, vf, 1);
+	ngbe_write_hide_vlan(adapter, vf, 1);
+	adapter->vfinfo[vf].pf_vlan = vlan;
+	adapter->vfinfo[vf].pf_qos = qos;
+	dev_info(pci_dev_to_dev(adapter->pdev),
+		 "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
+	if (test_bit(__NGBE_DOWN, &adapter->state)) {
+		dev_warn(pci_dev_to_dev(adapter->pdev),
+			"The VF VLAN has been set, but the PF device is not "
+			"up.\n");
+		dev_warn(pci_dev_to_dev(adapter->pdev),
+			"Bring the PF device up before attempting to use the VF "
+			"device.\n");
+	}
+
+out:
+	return err;
+}
+
+static int ngbe_disable_port_vlan(struct ngbe_adapter *adapter, int vf)
+{
+	struct ngbe_hw *hw = &adapter->hw;
+	int err;
+
+	err = ngbe_set_vf_vlan(adapter, false,
+				adapter->vfinfo[vf].pf_vlan, vf);
+	ngbe_clear_vmvir(adapter, vf);
+	ngbe_set_vmolr(hw, vf, true);
+	TCALL(hw, mac.ops.set_vlan_anti_spoofing, false, vf);
+	if (adapter->vfinfo[vf].vlan_count)
+		adapter->vfinfo[vf].vlan_count--;
+	/* disable hide vlan */
+	ngbe_write_hide_vlan(adapter, vf, 0);
+	adapter->vfinfo[vf].pf_vlan = 0;
+	adapter->vfinfo[vf].pf_qos = 0;
+
+	return err;
+}
+
+int ngbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan,
+			  u8 qos, __be16 vlan_proto)
+{
+	int err = 0;
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+
+	/* VLAN IDs accepted range 0-4094 */
+	if ((vf >= adapter->num_vfs) || (vlan > VLAN_VID_MASK-1) || (qos > 7))
+		return -EINVAL;
+
+	if (vlan_proto != htons(ETH_P_8021Q))
+		return -EPROTONOSUPPORT;
+
+	if (vlan || qos) {
+		/*
+		 * Check if there is already a port VLAN set, if so
+		 * we have to delete the old one first before we
+		 * can set the new one.  The usage model had
+		 * previously assumed the user would delete the
+		 * old port VLAN before setting a new one but this
+		 * is not necessarily the case.
+		 */
+		if (adapter->vfinfo[vf].pf_vlan)
+			err = ngbe_disable_port_vlan(adapter, vf);
+		if (err)
+			goto out;
+		err = ngbe_enable_port_vlan(adapter, vf, vlan, qos);
+
+	} else {
+		err = ngbe_disable_port_vlan(adapter, vf);
+	}
+out:
+	return err;
+}
+
+/* no effect */
+int ngbe_ndo_set_vf_bw(struct net_device *netdev,
+			int vf,
+			int min_tx_rate,
+			int max_tx_rate)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+
+	/* verify VF is active */
+	if (vf >= adapter->num_vfs)
+		return -EINVAL;
+
+	/* verify link is up */
+	if (!adapter->link_up)
+		return -EINVAL;
+
+	/* verify we are linked at 1 or 10 Gbps */
+	if (adapter->link_speed < NGBE_LINK_SPEED_1GB_FULL)
+		return -EINVAL;
+
+	/* store values */
+	adapter->vfinfo[vf].min_tx_rate = min_tx_rate;
+	adapter->vfinfo[vf].max_tx_rate = max_tx_rate;
+
+	return 0;
+}
+
+int ngbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	struct ngbe_hw *hw = &adapter->hw;
+	u32 regval;
+
+	if (vf >= adapter->num_vfs)
+		return -EINVAL;
+
+	adapter->vfinfo[vf].spoofchk_enabled = setting;
+
+	if (vf < 32) {
+		regval = (setting << vf);
+		wr32m(hw, NGBE_TDM_MAC_AS_L,
+			regval | (1 << vf), regval);
+
+		if (adapter->vfinfo[vf].vlan_count) {
+			wr32m(hw, NGBE_TDM_VLAN_AS_L,
+				regval | (1 << vf), regval);
+		}
+	}
+
+	return 0;
+}
+
+int ngbe_ndo_get_vf_config(struct net_device *netdev,
+			    int vf, struct ifla_vf_info *ivi)
+{
+	struct ngbe_adapter *adapter = netdev_priv(netdev);
+	if (vf >= adapter->num_vfs)
+		return -EINVAL;
+	ivi->vf = vf;
+	memcpy(&ivi->mac, adapter->vfinfo[vf].vf_mac_addresses, ETH_ALEN);
+
+	ivi->max_tx_rate = adapter->vfinfo[vf].max_tx_rate;
+	ivi->min_tx_rate = adapter->vfinfo[vf].min_tx_rate;
+
+	ivi->vlan = adapter->vfinfo[vf].pf_vlan;
+	ivi->qos = adapter->vfinfo[vf].pf_qos;
+
+	ivi->spoofchk = adapter->vfinfo[vf].spoofchk_enabled;
+	ivi->trusted = adapter->vfinfo[vf].trusted;
+
+	return 0;
+}
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_sriov.h b/drivers/net/ethernet/netswift/ngbe/ngbe_sriov.h
new file mode 100644
index 0000000000000..958c5303f72ad
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_sriov.h
@@ -0,0 +1,63 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+
+#ifndef _NGBE_SRIOV_H_
+#define _NGBE_SRIOV_H_
+
+/* ngbe driver limit the max number of VFs could be enabled to
+ * 7 (NGBE_MAX_VF_FUNCTIONS - 1)
+ */
+#define NGBE_MAX_VFS_DRV_LIMIT  (NGBE_MAX_VF_FUNCTIONS - 1)
+
+void ngbe_restore_vf_multicasts(struct ngbe_adapter *adapter);
+int ngbe_set_vf_vlan(struct ngbe_adapter *adapter, int add, int vid, u16 vf);
+void ngbe_set_vmolr(struct ngbe_hw *hw, u16 vf, bool aupe);
+void ngbe_msg_task(struct ngbe_adapter *adapter);
+int ngbe_set_vf_mac(struct ngbe_adapter *adapter,
+		     u16 vf, unsigned char *mac_addr);
+void ngbe_disable_tx_rx(struct ngbe_adapter *adapter);
+void ngbe_ping_all_vfs(struct ngbe_adapter *adapter);
+
+int ngbe_ndo_set_vf_mac(struct net_device *netdev, int queue, u8 *mac);
+
+int ngbe_ndo_set_vf_vlan(struct net_device *netdev, int queue, u16 vlan,
+			  u8 qos, __be16 vlan_proto);
+
+int ngbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate,
+			int max_tx_rate);
+
+int ngbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting);
+int ngbe_ndo_set_vf_trust(struct net_device *netdev, int vf, bool setting);
+int ngbe_ndo_get_vf_config(struct net_device *netdev,
+			    int vf, struct ifla_vf_info *ivi);
+
+int ngbe_disable_sriov(struct ngbe_adapter *adapter);
+#ifdef CONFIG_PCI_IOV
+int ngbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask);
+void ngbe_enable_sriov(struct ngbe_adapter *adapter);
+#endif
+int ngbe_pci_sriov_configure(struct pci_dev *dev, int num_vfs);
+
+#define NGBE_VF_STATUS_LINKUP         0x1
+
+/*
+ * These are defined in ngbe_type.h on behalf of the VF driver
+ * but we need them here unwrapped for the PF driver.
+ */
+//#define NGBE_DEV_ID_SP_VF                      0x1000
+#endif /* _NGBE_SRIOV_H_ */
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_sysfs.c b/drivers/net/ethernet/netswift/ngbe/ngbe_sysfs.c
new file mode 100644
index 0000000000000..559d02b2feeb2
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_sysfs.c
@@ -0,0 +1,222 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+#include "ngbe.h"
+#include "ngbe_hw.h"
+#include "ngbe_type.h"
+
+#ifdef CONFIG_NGBE_SYSFS
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/time.h>
+#ifdef CONFIG_NGBE_HWMON
+#include <linux/hwmon.h>
+#endif
+
+#ifdef CONFIG_NGBE_HWMON
+/* hwmon callback functions */
+static ssize_t ngbe_hwmon_show_temp(struct device __always_unused *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct hwmon_attr *ngbe_attr = container_of(attr, struct hwmon_attr,
+						     dev_attr);
+	unsigned int value;
+
+	/* reset the temp field */
+	TCALL(ngbe_attr->hw, mac.ops.get_thermal_sensor_data);
+
+	value = ngbe_attr->sensor->temp;
+
+	/* display millidegree */
+	value *= 1000;
+
+	return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t ngbe_hwmon_show_alarmthresh(struct device __always_unused *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct hwmon_attr *ngbe_attr = container_of(attr, struct hwmon_attr,
+						     dev_attr);
+	unsigned int value = ngbe_attr->sensor->alarm_thresh;
+
+	/* display millidegree */
+	value *= 1000;
+
+	return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t ngbe_hwmon_show_dalarmthresh(struct device __always_unused *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct hwmon_attr *ngbe_attr = container_of(attr, struct hwmon_attr,
+						     dev_attr);
+	unsigned int value = ngbe_attr->sensor->dalarm_thresh;
+
+	/* display millidegree */
+	value *= 1000;
+
+	return sprintf(buf, "%u\n", value);
+}
+
+/**
+ * ngbe_add_hwmon_attr - Create hwmon attr table for a hwmon sysfs file.
+ * @adapter: pointer to the adapter structure
+ * @type: type of sensor data to display
+ *
+ * For each file we want in hwmon's sysfs interface we need a device_attribute
+ * This is included in our hwmon_attr struct that contains the references to
+ * the data structures we need to get the data to display.
+ */
+static int ngbe_add_hwmon_attr(struct ngbe_adapter *adapter, int type)
+{
+	int rc;
+	unsigned int n_attr;
+	struct hwmon_attr *ngbe_attr;
+
+	n_attr = adapter->ngbe_hwmon_buff.n_hwmon;
+	ngbe_attr = &adapter->ngbe_hwmon_buff.hwmon_list[n_attr];
+
+	switch (type) {
+	case NGBE_HWMON_TYPE_TEMP:
+		ngbe_attr->dev_attr.show = ngbe_hwmon_show_temp;
+		snprintf(ngbe_attr->name, sizeof(ngbe_attr->name),
+			 "temp%u_input", 0);
+		break;
+	case NGBE_HWMON_TYPE_ALARMTHRESH:
+		ngbe_attr->dev_attr.show = ngbe_hwmon_show_alarmthresh;
+		snprintf(ngbe_attr->name, sizeof(ngbe_attr->name),
+			 "temp%u_alarmthresh", 0);
+		break;
+	case NGBE_HWMON_TYPE_DALARMTHRESH:
+		ngbe_attr->dev_attr.show = ngbe_hwmon_show_dalarmthresh;
+		snprintf(ngbe_attr->name, sizeof(ngbe_attr->name),
+			 "temp%u_dalarmthresh", 0);
+		break;
+	default:
+		rc = -EPERM;
+		return rc;
+	}
+
+	/* These always the same regardless of type */
+	ngbe_attr->sensor =
+		&adapter->hw.mac.thermal_sensor_data.sensor;
+	ngbe_attr->hw = &adapter->hw;
+	ngbe_attr->dev_attr.store = NULL;
+	ngbe_attr->dev_attr.attr.mode = S_IRUGO;
+	ngbe_attr->dev_attr.attr.name = ngbe_attr->name;
+
+	rc = device_create_file(pci_dev_to_dev(adapter->pdev),
+				&ngbe_attr->dev_attr);
+
+	if (rc == 0)
+		++adapter->ngbe_hwmon_buff.n_hwmon;
+
+	return rc;
+}
+#endif /* CONFIG_NGBE_HWMON */
+
+static void ngbe_sysfs_del_adapter(
+				struct ngbe_adapter __maybe_unused *adapter)
+{
+#ifdef CONFIG_NGBE_HWMON
+	int i;
+
+	if (adapter == NULL)
+		return;
+
+	for (i = 0; i < adapter->ngbe_hwmon_buff.n_hwmon; i++) {
+		device_remove_file(pci_dev_to_dev(adapter->pdev),
+			   &adapter->ngbe_hwmon_buff.hwmon_list[i].dev_attr);
+	}
+
+	kfree(adapter->ngbe_hwmon_buff.hwmon_list);
+
+	if (adapter->ngbe_hwmon_buff.device)
+		hwmon_device_unregister(adapter->ngbe_hwmon_buff.device);
+#endif /* CONFIG_NGBE_HWMON */
+}
+
+/* called from ngbe_main.c */
+void ngbe_sysfs_exit(struct ngbe_adapter *adapter)
+{
+	ngbe_sysfs_del_adapter(adapter);
+}
+
+/* called from ngbe_main.c */
+int ngbe_sysfs_init(struct ngbe_adapter *adapter)
+{
+	int rc = 0;
+#ifdef CONFIG_NGBE_HWMON
+	struct hwmon_buff *ngbe_hwmon = &adapter->ngbe_hwmon_buff;
+	int n_attrs;
+
+#endif /* CONFIG_NGBE_HWMON */
+	if (adapter == NULL)
+		goto err;
+
+#ifdef CONFIG_NGBE_HWMON
+
+	/* Don't create thermal hwmon interface if no sensors present */
+	if (TCALL(&adapter->hw, mac.ops.init_thermal_sensor_thresh))
+		goto no_thermal;
+
+	/*
+	 * Allocation space for max attributs
+	 * max num sensors * values (temp, alamthresh, dalarmthresh)
+	 */
+	n_attrs = 3;
+	ngbe_hwmon->hwmon_list = kcalloc(n_attrs, sizeof(struct hwmon_attr),
+					  GFP_KERNEL);
+	if (!ngbe_hwmon->hwmon_list) {
+		rc = -ENOMEM;
+		goto err;
+	}
+
+	ngbe_hwmon->device =
+			hwmon_device_register(pci_dev_to_dev(adapter->pdev));
+	if (IS_ERR(ngbe_hwmon->device)) {
+		rc = PTR_ERR(ngbe_hwmon->device);
+		goto err;
+	}
+
+	/* Bail if any hwmon attr struct fails to initialize */
+	rc = ngbe_add_hwmon_attr(adapter, NGBE_HWMON_TYPE_TEMP);
+	rc |= ngbe_add_hwmon_attr(adapter, NGBE_HWMON_TYPE_ALARMTHRESH);
+	rc |= ngbe_add_hwmon_attr(adapter, NGBE_HWMON_TYPE_DALARMTHRESH);
+	if (rc)
+		goto err;
+
+no_thermal:
+#endif /* CONFIG_NGBE_HWMON */
+	goto exit;
+
+err:
+	ngbe_sysfs_del_adapter(adapter);
+exit:
+	return rc;
+}
+#endif /* CONFIG_NGBE_SYSFS */
diff --git a/drivers/net/ethernet/netswift/ngbe/ngbe_type.h b/drivers/net/ethernet/netswift/ngbe/ngbe_type.h
new file mode 100644
index 0000000000000..4e7f627edbbce
--- /dev/null
+++ b/drivers/net/ethernet/netswift/ngbe/ngbe_type.h
@@ -0,0 +1,2941 @@
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2015 - 2017 Beijing WangXun Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+#ifndef _NGBE_TYPE_H_
+#define _NGBE_TYPE_H_
+
+#include <linux/types.h>
+#include <linux/mdio.h>
+#include <linux/netdevice.h>
+
+/*
+ * The following is a brief description of the error categories used by the
+ * ERROR_REPORT* macros.
+ *
+ * - NGBE_ERROR_INVALID_STATE
+ * This category is for errors which represent a serious failure state that is
+ * unexpected, and could be potentially harmful to device operation. It should
+ * not be used for errors relating to issues that can be worked around or
+ * ignored.
+ *
+ * - NGBE_ERROR_POLLING
+ * This category is for errors related to polling/timeout issues and should be
+ * used in any case where the timeout occured, or a failure to obtain a lock, or
+ * failure to receive data within the time limit.
+ *
+ * - NGBE_ERROR_CAUTION
+ * This category should be used for reporting issues that may be the cause of
+ * other errors, such as temperature warnings. It should indicate an event which
+ * could be serious, but hasn't necessarily caused problems yet.
+ *
+ * - NGBE_ERROR_SOFTWARE
+ * This category is intended for errors due to software state preventing
+ * something. The category is not intended for errors due to bad arguments, or
+ * due to unsupported features. It should be used when a state occurs which
+ * prevents action but is not a serious issue.
+ *
+ * - NGBE_ERROR_ARGUMENT
+ * This category is for when a bad or invalid argument is passed. It should be
+ * used whenever a function is called and error checking has detected the
+ * argument is wrong or incorrect.
+ *
+ * - NGBE_ERROR_UNSUPPORTED
+ * This category is for errors which are due to unsupported circumstances or
+ * configuration issues. It should not be used when the issue is due to an
+ * invalid argument, but for when something has occurred that is unsupported
+ * (Ex: Flow control autonegotiation or an unsupported SFP+ module.)
+ */
+
+/* Little Endian defines */
+#ifndef __le16
+#define __le16  u16
+#endif
+#ifndef __le32
+#define __le32  u32
+#endif
+#ifndef __le64
+#define __le64  u64
+
+#endif
+#ifndef __be16
+/* Big Endian defines */
+#define __be16  u16
+#define __be32  u32
+#define __be64  u64
+
+#endif
+
+/************ ngbe_register.h ************/
+/* Vendor ID */
+#ifndef PCI_VENDOR_ID_TRUSTNETIC
+#define PCI_VENDOR_ID_TRUSTNETIC                0x8088
+#endif
+
+/* Device IDs */
+/* copper */
+#define NGBE_DEV_ID_EM_TEST                   0x0000
+#define NGBE_DEV_ID_EM_WX1860AL_W             0x0100
+#define NGBE_DEV_ID_EM_WX1860A2               0x0101
+#define NGBE_DEV_ID_EM_WX1860A2S              0x0102
+#define NGBE_DEV_ID_EM_WX1860A4               0x0103
+#define NGBE_DEV_ID_EM_WX1860A4S              0x0104
+#define NGBE_DEV_ID_EM_WX1860AL2              0x0105
+#define NGBE_DEV_ID_EM_WX1860AL2S             0x0106
+#define NGBE_DEV_ID_EM_WX1860AL4              0x0107
+#define NGBE_DEV_ID_EM_WX1860AL4S             0x0108
+#define NGBE_DEV_ID_EM_WX1860NCSI             0x0109
+#define NGBE_DEV_ID_EM_WX1860A1               0x010a
+#define NGBE_DEV_ID_EM_WX1860AL1              0x010b
+
+/* transfer units */
+#define NGBE_KB_TO_B                          1024
+
+/* Subsystem ID */
+#define NGBE_WX1860AL_INTERNAL                0x0410
+#define NGBE_WX1860AL_ZTE5201_RJ45            0x0100
+#define NGBE_WX1860AL_M88E1512_RJ45           0x0200
+#define NGBE_WX1860AL_M88E1512_SFP            0x0403
+#define NGBE_WX1860AL_YT8521S_SFP             0x0460
+
+#define NGBE_SUBSYSTEM_ID_EM_SF100F_LP        0x0103
+#define NGBE_SUBSYSTEM_ID_EM_SF100HF_LP       0x0103
+#define NGBE_SUBSYSTEM_ID_EM_SF200T           0x0201
+#define NGBE_SUBSYSTEM_ID_EM_SF200T_S         0x0210
+#define NGBE_SUBSYSTEM_ID_EM_SF400T           0x0401
+#define NGBE_SUBSYSTEM_ID_EM_SF400T_S         0x0410
+#define NGBE_SUBSYSTEM_ID_EM_SF200HT          0x0202
+#define NGBE_SUBSYSTEM_ID_EM_SF200HT_S        0x0220
+#define NGBE_SUBSYSTEM_ID_EM_SF400HT          0x0402
+#define NGBE_SUBSYSTEM_ID_EM_SF400HT_S        0x0420
+#define NGBE_SUBSYSTEM_ID_EM_SF200HXT         0x0230
+#define NGBE_SUBSYSTEM_ID_EM_SF400HXT         0x0430
+#define NGBE_SUBSYSTEM_ID_EM_SF400_OCP        0x0440
+#define NGBE_SUBSYSTEM_ID_EM_SF400_LY         0x0450
+#define NGBE_SUBSYSTEM_ID_EM_SF400_LY_YT      0x0470
+
+#define INTERNAL_SFP                          0x0003
+#define OCP_CARD                              0x0040
+#define LY_M88E1512_SFP                       0x0050
+#define YT8521S_SFP                           0x0060
+#define LY_YT8521S_SFP                        0x0070
+
+#define OEM_MASK                              0x00F0
+#define INTERNAL_SFP_MASK                     0x000F
+
+#define NCSI_SUP                              0x8000
+#define NCSI_SUP_MASK                         0x8000
+
+#define WOL_SUP                               0x4000
+#define WOL_SUP_MASK                          0x4000
+
+/* MDIO Manageable Devices (MMDs). */
+#define NGBE_MDIO_PMA_PMD_DEV_TYPE            0x1 /* PMA and PMD */
+#define NGBE_MDIO_PCS_DEV_TYPE                0x3 /* Physical Coding Sublayer*/
+#define NGBE_MDIO_PHY_XS_DEV_TYPE             0x4 /* PHY Extender Sublayer */
+#define NGBE_MDIO_AUTO_NEG_DEV_TYPE           0x7 /* Auto-Negotiation */
+#define NGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE  0x1E /* Vendor specific 1 */
+
+/* phy register definitions */
+/* VENDOR_SPECIFIC_1_DEV regs */
+#define NGBE_MDIO_VENDOR_SPECIFIC_1_STATUS             0x1 /* VS1 Status Reg */
+#define NGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS        0x0008 /* 1 = Link Up */
+#define NGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS       0x0010 /* 0-10G, 1-1G */
+
+/* AUTO_NEG_DEV regs */
+#define NGBE_MDIO_AUTO_NEG_CONTROL              0x0  /* AUTO_NEG Control Reg */
+#define NGBE_MDIO_AUTO_NEG_ADVT                 0x10 /* AUTO_NEG Advt Reg */
+#define NGBE_MDIO_AUTO_NEG_LP                   0x13 /* AUTO_NEG LP Reg */
+#define NGBE_MDIO_AUTO_NEG_LP_STATUS            0xE820 /* AUTO NEG RX LP Status
+														 * Reg */
+#define NGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400 /* 1G Provisioning 1 */
+#define NGBE_MII_AUTONEG_XNP_TX_REG             0x17   /* 1G XNP Transmit */
+#define NGBE_MII_AUTONEG_ADVERTISE_REG          0x10   /* 100M Advertisement */
+
+#define NGBE_MDIO_AUTO_NEG_1000BASE_EEE_ADVT   0x4
+#define NGBE_MDIO_AUTO_NEG_100BASE_EEE_ADVT    0x2
+#define NGBE_MDIO_AUTO_NEG_LP_1000BASE_CAP     0x8000
+
+#define NGBE_MII_1GBASE_T_ADVERTISE_XNP_TX     0x4000 /* full duplex, bit:14*/
+#define NGBE_MII_1GBASE_T_ADVERTISE            0x8000 /* full duplex, bit:15*/
+#define NGBE_MII_100BASE_T_ADVERTISE           0x0100 /* full duplex, bit:8 */
+#define NGBE_MII_100BASE_T_ADVERTISE_HALF      0x0080 /* half duplex, bit:7 */
+#define NGBE_MII_RESTART                       0x200
+#define NGBE_MII_AUTONEG_COMPLETE              0x20
+#define NGBE_MII_AUTONEG_LINK_UP               0x04
+#define NGBE_MII_AUTONEG_REG                   0x0
+
+/* PHY_XS_DEV regs */
+#define NGBE_MDIO_PHY_XS_CONTROL               0x0    /* PHY_XS Control Reg */
+#define NGBE_MDIO_PHY_XS_RESET                 0x8000 /* PHY_XS Reset */
+
+/* Media-dependent registers. */
+#define NGBE_MDIO_PHY_ID_HIGH                  0x2 /* PHY ID High Reg*/
+#define NGBE_MDIO_PHY_ID_LOW                   0x3 /* PHY ID Low Reg*/
+#define NGBE_MDIO_PHY_SPEED_ABILITY            0x4 /* Speed Ability Reg */
+#define NGBE_MDIO_PHY_EXT_ABILITY              0xB /* Ext Ability Reg */
+
+#define NGBE_MDIO_PHY_SPEED_1G                 0x0010 /* 1G capable */
+#define NGBE_MDIO_PHY_SPEED_100M               0x0020 /* 100M capable */
+#define NGBE_MDIO_PHY_SPEED_10M                0x0040 /* 10M capable */
+
+#define NGBE_MDIO_PHY_1000BASET_ABILITY        0x0020 /* 1000BaseT capable */
+#define NGBE_MDIO_PHY_100BASETX_ABILITY        0x0080 /* 100BaseTX capable */
+
+#define NGBE_PHY_REVISION_MASK                 0xFFFFFFF0U
+#define NGBE_MAX_PHY_ADDR                      32
+
+#define NGBE_MDIO_CLAUSE_SELECT                0x11220
+
+/* INTERNAL PHY CONTROL */
+#define NGBE_INTERNAL_PHY_PAGE_SELECT_OFFSET   31
+#define NGBE_INTERNAL_PHY_OFFSET_MAX           32
+#define NGBE_INTERNAL_PHY_ID                   0x000732
+
+#define NGBE_INTPHY_LED0                       0x0010
+#define NGBE_INTPHY_LED1                       0x0040
+#define NGBE_INTPHY_LED2                       0x2000
+
+#define NGBE_INTPHY_INT_LSC                    0x0010
+#define NGBE_INTPHY_INT_ANC                    0x0008
+
+/* PHY MDI STANDARD CONFIG */
+#define NGBE_MDI_PHY_ID1_OFFSET                2
+#define NGBE_MDI_PHY_ID2_OFFSET                3
+#define NGBE_MDI_PHY_ID_MASK                   0xFFFFFC00U
+#define NGBE_MDI_PHY_SPEED_SELECT1             0x0040
+#define NGBE_MDI_PHY_DUPLEX                    0x0100
+#define NGBE_MDI_PHY_RESTART_AN                0x0200
+#define NGBE_MDI_PHY_ANE                       0x1000
+#define NGBE_MDI_PHY_SPEED_SELECT0             0x2000
+#define NGBE_MDI_PHY_RESET                     0x8000
+
+#define NGBE_PHY_RST_WAIT_PERIOD               5
+
+#define NGBE_M88E1512_PHY_ID                   0x005043
+/* reg 18_0 */
+#define NGBE_M88E1512_INT_LSC                  0x0400
+#define NGBE_M88E1512_INT_ANC                  0x0800
+/* reg 18_3 */
+#define NGBE_M88E1512_INT_EN                   0x0080
+#define NGBE_M88E1512_INT_POL                  0x0800
+
+/* reg 21_2 */
+#define NGBE_M88E1512_RGM_TTC                  0x0010
+#define NGBE_M88E1512_RGM_RTC                  0x0020
+
+/* LED control */
+#define NGBE_M88E1512_LED1_CONF                0x6
+#define NGBE_M88E1512_LED0_CONF                0x1
+
+/* LED polarity */
+#define NGBE_M88E1512_LED1_POL                0x1
+#define NGBE_M88E1512_LED0_POL                0x1
+
+/* reg 4_0 ADV REG*/
+#define NGBE_M88E1512_10BASET_HALF             0x0020
+#define NGBE_M88E1512_10BASET_FULL             0x0040
+#define NGBE_M88E1512_100BASET_HALF            0x0080
+#define NGBE_M88E1512_100BASET_FULL            0x0100
+
+/* reg 9_0 ADV REG*/
+#define NGBE_M88E1512_1000BASET_HALF           0x0100
+#define NGBE_M88E1512_1000BASET_FULL           0x0200
+
+/* reg 19_0 INT status*/
+#define NGBE_M88E1512_ANC                      0x0800
+#define NGBE_M88E1512_LSC                      0x0400
+
+/* yt8521s reg */
+#define NGBE_YT8521S_PHY_ID                    0x011a
+
+#define NGBE_YT8521S_SDS_LINK_UP               0x4
+#define NGBE_YT8521S_SDS_LINK_DOWN             0x8
+
+/* PHY IDs*/
+#define TN1010_PHY_ID                          0x00A19410U
+#define QT2022_PHY_ID                          0x0043A400U
+#define ATH_PHY_ID                             0x03429050U
+/* PHY FW revision */
+#define TNX_FW_REV                             0xB
+#define AQ_FW_REV                              0x20
+
+/* ETH PHY Registers */
+#define NGBE_SR_XS_PCS_MMD_STATUS1             0x30001
+#define NGBE_SR_PCS_CTL2                       0x30007
+#define NGBE_SR_PMA_MMD_CTL1                   0x10000
+#define NGBE_SR_MII_MMD_CTL                    0x1F0000
+#define NGBE_SR_MII_MMD_DIGI_CTL               0x1F8000
+#define NGBE_SR_MII_MMD_AN_CTL                 0x1F8001
+#define NGBE_SR_MII_MMD_AN_ADV                 0x1F0004
+#define NGBE_SR_MII_MMD_AN_ADV_PAUSE(_v)       ((0x3 & (_v)) << 7)
+#define NGBE_SR_MII_MMD_LP_BABL                0x1F0005
+#define NGBE_SR_AN_MMD_CTL                     0x70000
+#define NGBE_SR_AN_MMD_ADV_REG1                0x70010
+#define NGBE_SR_AN_MMD_ADV_REG1_PAUSE(_v)      ((0x3 & (_v)) << 10)
+#define NGBE_SR_AN_MMD_ADV_REG1_PAUSE_SYM      0x400
+#define NGBE_SR_AN_MMD_ADV_REG1_PAUSE_ASM      0x800
+#define NGBE_SR_AN_MMD_ADV_REG2                0x70011
+#define NGBE_SR_AN_MMD_LP_ABL1                 0x70013
+#define NGBE_VR_AN_KR_MODE_CL                  0x78003
+#define NGBE_VR_XS_OR_PCS_MMD_DIGI_CTL1        0x38000
+#define NGBE_VR_XS_OR_PCS_MMD_DIGI_STATUS      0x38010
+
+#define NGBE_PHY_MPLLA_CTL0                    0x18071
+#define NGBE_PHY_MPLLA_CTL3                    0x18077
+#define NGBE_PHY_MISC_CTL0                     0x18090
+#define NGBE_PHY_VCO_CAL_LD0                   0x18092
+#define NGBE_PHY_VCO_CAL_LD1                   0x18093
+#define NGBE_PHY_VCO_CAL_LD2                   0x18094
+#define NGBE_PHY_VCO_CAL_LD3                   0x18095
+#define NGBE_PHY_VCO_CAL_REF0                  0x18096
+#define NGBE_PHY_VCO_CAL_REF1                  0x18097
+#define NGBE_PHY_RX_AD_ACK                     0x18098
+#define NGBE_PHY_AFE_DFE_ENABLE                0x1805D
+#define NGBE_PHY_DFE_TAP_CTL0                  0x1805E
+#define NGBE_PHY_RX_EQ_ATT_LVL0                0x18057
+#define NGBE_PHY_RX_EQ_CTL0                    0x18058
+#define NGBE_PHY_RX_EQ_CTL                     0x1805C
+#define NGBE_PHY_TX_EQ_CTL0                    0x18036
+#define NGBE_PHY_TX_EQ_CTL1                    0x18037
+#define NGBE_PHY_TX_RATE_CTL                   0x18034
+#define NGBE_PHY_RX_RATE_CTL                   0x18054
+#define NGBE_PHY_TX_GEN_CTL2                   0x18032
+#define NGBE_PHY_RX_GEN_CTL2                   0x18052
+#define NGBE_PHY_RX_GEN_CTL3                   0x18053
+#define NGBE_PHY_MPLLA_CTL2                    0x18073
+#define NGBE_PHY_RX_POWER_ST_CTL               0x18055
+#define NGBE_PHY_TX_POWER_ST_CTL               0x18035
+#define NGBE_PHY_TX_GENCTRL1                   0x18031
+
+#define NGBE_SR_PCS_CTL2_PCS_TYPE_SEL_R        0x0
+#define NGBE_SR_PCS_CTL2_PCS_TYPE_SEL_X        0x1
+#define NGBE_SR_PCS_CTL2_PCS_TYPE_SEL_MASK     0x3
+#define NGBE_SR_PMA_MMD_CTL1_SPEED_SEL_1G      0x0
+#define NGBE_SR_PMA_MMD_CTL1_SPEED_SEL_MASK    0x2000
+#define NGBE_SR_PMA_MMD_CTL1_LB_EN             0x1
+#define NGBE_SR_MII_MMD_CTL_AN_EN              0x1000
+#define NGBE_SR_MII_MMD_CTL_RESTART_AN         0x0200
+#define NGBE_SR_AN_MMD_CTL_RESTART_AN          0x0200
+#define NGBE_SR_AN_MMD_CTL_ENABLE              0x1000
+#define NGBE_SR_AN_MMD_ADV_REG2_BP_TYPE_KX4    0x40
+#define NGBE_SR_AN_MMD_ADV_REG2_BP_TYPE_KX     0x20
+#define NGBE_SR_AN_MMD_ADV_REG2_BP_TYPE_KR     0x80
+#define NGBE_SR_AN_MMD_ADV_REG2_BP_TYPE_MASK   0xFFFF
+#define NGBE_VR_XS_OR_PCS_MMD_DIGI_CTL1_ENABLE 0x1000
+#define NGBE_VR_XS_OR_PCS_MMD_DIGI_CTL1_VR_RST 0x8000
+#define NGBE_VR_XS_OR_PCS_MMD_DIGI_STATUS_PSEQ_MASK            0x1C
+#define NGBE_VR_XS_OR_PCS_MMD_DIGI_STATUS_PSEQ_POWER_GOOD      0x10
+
+#define NGBE_PHY_MPLLA_CTL0_MULTIPLIER_1GBASEX_KX              32
+#define NGBE_PHY_MPLLA_CTL0_MULTIPLIER_OTHER                   40
+#define NGBE_PHY_MPLLA_CTL0_MULTIPLIER_MASK                    0xFF
+#define NGBE_PHY_MPLLA_CTL3_MULTIPLIER_BW_1GBASEX_KX           0x46
+#define NGBE_PHY_MPLLA_CTL3_MULTIPLIER_BW_OTHER                0x56
+#define NGBE_PHY_MPLLA_CTL3_MULTIPLIER_BW_MASK                 0x7FF
+#define NGBE_PHY_MISC_CTL0_TX2RX_LB_EN_0                       0x1
+#define NGBE_PHY_MISC_CTL0_TX2RX_LB_EN_3_1                     0xE
+#define NGBE_PHY_MISC_CTL0_RX_VREF_CTRL                        0x1F00
+#define NGBE_PHY_VCO_CAL_LD0_1GBASEX_KX                        1344
+#define NGBE_PHY_VCO_CAL_LD0_OTHER                             1360
+#define NGBE_PHY_VCO_CAL_LD0_MASK                              0x1000
+#define NGBE_PHY_VCO_CAL_REF0_LD0_1GBASEX_KX                   42
+#define NGBE_PHY_VCO_CAL_REF0_LD0_OTHER                        34
+#define NGBE_PHY_VCO_CAL_REF0_LD0_MASK                         0x3F
+#define NGBE_PHY_AFE_DFE_ENABLE_DFE_EN0                        0x10
+#define NGBE_PHY_AFE_DFE_ENABLE_AFE_EN0                        0x1
+#define NGBE_PHY_AFE_DFE_ENABLE_MASK                           0xFF
+#define NGBE_PHY_RX_EQ_CTL_CONT_ADAPT0                         0x1
+#define NGBE_PHY_RX_EQ_CTL_CONT_ADAPT_MASK                     0xF
+#define NGBE_PHY_TX_RATE_CTL_TX0_RATE_RXAUI                    0x1
+#define NGBE_PHY_TX_RATE_CTL_TX0_RATE_1GBASEX_KX               0x3
+#define NGBE_PHY_TX_RATE_CTL_TX0_RATE_OTHER                    0x2
+#define NGBE_PHY_TX_RATE_CTL_TX1_RATE_OTHER                    0x20
+#define NGBE_PHY_TX_RATE_CTL_TX2_RATE_OTHER                    0x200
+#define NGBE_PHY_TX_RATE_CTL_TX3_RATE_OTHER                    0x2000
+#define NGBE_PHY_TX_RATE_CTL_TX0_RATE_MASK                     0x7
+#define NGBE_PHY_TX_RATE_CTL_TX1_RATE_MASK                     0x70
+#define NGBE_PHY_TX_RATE_CTL_TX2_RATE_MASK                     0x700
+#define NGBE_PHY_TX_RATE_CTL_TX3_RATE_MASK                     0x7000
+#define NGBE_PHY_RX_RATE_CTL_RX0_RATE_RXAUI                    0x1
+#define NGBE_PHY_RX_RATE_CTL_RX0_RATE_1GBASEX_KX               0x3
+#define NGBE_PHY_RX_RATE_CTL_RX0_RATE_OTHER                    0x2
+#define NGBE_PHY_RX_RATE_CTL_RX1_RATE_OTHER                    0x20
+#define NGBE_PHY_RX_RATE_CTL_RX2_RATE_OTHER                    0x200
+#define NGBE_PHY_RX_RATE_CTL_RX3_RATE_OTHER                    0x2000
+#define NGBE_PHY_RX_RATE_CTL_RX0_RATE_MASK                     0x7
+#define NGBE_PHY_RX_RATE_CTL_RX1_RATE_MASK                     0x70
+#define NGBE_PHY_RX_RATE_CTL_RX2_RATE_MASK                     0x700
+#define NGBE_PHY_RX_RATE_CTL_RX3_RATE_MASK                     0x7000
+#define NGBE_PHY_TX_GEN_CTL2_TX0_WIDTH_OTHER                   0x100
+#define NGBE_PHY_TX_GEN_CTL2_TX0_WIDTH_MASK                    0x300
+#define NGBE_PHY_TX_GEN_CTL2_TX1_WIDTH_OTHER                   0x400
+#define NGBE_PHY_TX_GEN_CTL2_TX1_WIDTH_MASK                    0xC00
+#define NGBE_PHY_TX_GEN_CTL2_TX2_WIDTH_OTHER                   0x1000
+#define NGBE_PHY_TX_GEN_CTL2_TX2_WIDTH_MASK                    0x3000
+#define NGBE_PHY_TX_GEN_CTL2_TX3_WIDTH_OTHER                   0x4000
+#define NGBE_PHY_TX_GEN_CTL2_TX3_WIDTH_MASK                    0xC000
+#define NGBE_PHY_RX_GEN_CTL2_RX0_WIDTH_OTHER                   0x100
+#define NGBE_PHY_RX_GEN_CTL2_RX0_WIDTH_MASK                    0x300
+#define NGBE_PHY_RX_GEN_CTL2_RX1_WIDTH_OTHER                   0x400
+#define NGBE_PHY_RX_GEN_CTL2_RX1_WIDTH_MASK                    0xC00
+#define NGBE_PHY_RX_GEN_CTL2_RX2_WIDTH_OTHER                   0x1000
+#define NGBE_PHY_RX_GEN_CTL2_RX2_WIDTH_MASK                    0x3000
+#define NGBE_PHY_RX_GEN_CTL2_RX3_WIDTH_OTHER                   0x4000
+#define NGBE_PHY_RX_GEN_CTL2_RX3_WIDTH_MASK                    0xC000
+
+#define NGBE_PHY_MPLLA_CTL2_DIV_CLK_EN_8                       0x100
+#define NGBE_PHY_MPLLA_CTL2_DIV_CLK_EN_10                      0x200
+#define NGBE_PHY_MPLLA_CTL2_DIV_CLK_EN_16P5                    0x400
+#define NGBE_PHY_MPLLA_CTL2_DIV_CLK_EN_MASK                    0x700
+
+#define NGBE_XPCS_POWER_GOOD_MAX_POLLING_TIME  100
+#define NGBE_PHY_INIT_DONE_POLLING_TIME        100
+
+/**************** Global Registers ****************************/
+/* chip control Registers */
+#define NGBE_MIS_RST                   0x1000C
+#define NGBE_MIS_PWR                   0x10000
+#define NGBE_MIS_CTL                   0x10004
+#define NGBE_MIS_PF_SM                 0x10008
+#define NGBE_MIS_ST                    0x10028
+#define NGBE_MIS_SWSM                  0x1002C
+#define NGBE_MIS_RST_ST                0x10030
+
+#define NGBE_MIS_RST_SW_RST            0x00000001U
+#define NGBE_MIS_RST_LAN0_RST           0x00000002U
+#define NGBE_MIS_RST_LAN1_RST           0x00000004U
+#define NGBE_MIS_RST_LAN2_RST           0x00000008U
+#define NGBE_MIS_RST_LAN3_RST           0x00000010U
+#define NGBE_MIS_RST_FW_RST             0x00000020U
+
+#define NGBE_MIS_RST_LAN0_CHG_ETH_MODE 0x20000000U
+#define NGBE_MIS_RST_LAN1_CHG_ETH_MODE 0x40000000U
+#define NGBE_MIS_RST_GLOBAL_RST        0x80000000U
+
+#define NGBE_MIS_PWR_LAN_ID(_r)        ((0xF0000000U & (_r)) >> 28)
+#define NGBE_MIS_PWR_LAN_ID_0          (1)
+#define NGBE_MIS_PWR_LAN_ID_1          (2)
+#define NGBE_MIS_PWR_LAN_ID_2          (3)
+#define NGBE_MIS_PWR_LAN_ID_3          (4)
+
+#define NGBE_MIS_ST_MNG_INIT_DN        0x00000001U
+#define NGBE_MIS_ST_MNG_VETO           0x00000100U
+#define NGBE_MIS_ST_LAN0_ECC           0x00010000U
+#define NGBE_MIS_ST_LAN1_ECC           0x00020000U
+#define NGBE_MIS_ST_LAN2_ECC           0x00040000U
+#define NGBE_MIS_ST_LAN3_ECC           0x00080000U
+#define NGBE_MIS_ST_MNG_ECC            0x00100000U
+#define NGBE_MIS_ST_PCORE_ECC          0x00200000U
+#define NGBE_MIS_ST_PCIWRP_ECC         0x00400000U
+#define NGBE_MIS_ST_PCIEPHY_ECC        0x00800000U
+#define NGBE_MIS_ST_FMGR_ECC           0x01000000U
+#define NGBE_MIS_ST_GPHY_IN_RST(_r)    (0x00000200U << (_r))
+
+#define NGBE_MIS_SWSM_SMBI             1
+#define NGBE_MIS_RST_ST_DEV_RST_ST_DONE        0x00000000U
+#define NGBE_MIS_RST_ST_DEV_RST_ST_REQ         0x00080000U
+#define NGBE_MIS_RST_ST_DEV_RST_ST_INPROGRESS  0x00100000U
+#define NGBE_MIS_RST_ST_DEV_RST_ST_MASK        0x00180000U
+#define NGBE_MIS_RST_ST_DEV_RST_TYPE_MASK      0x00070000U
+#define NGBE_MIS_RST_ST_DEV_RST_TYPE_SHIFT     16
+#define NGBE_MIS_RST_ST_DEV_RST_TYPE_SW_RST    0x3
+#define NGBE_MIS_RST_ST_DEV_RST_TYPE_GLOBAL_RST 0x5
+#define NGBE_MIS_RST_ST_RST_INIT       0x0000FF00U
+#define NGBE_MIS_RST_ST_RST_INI_SHIFT  8
+#define NGBE_MIS_RST_ST_RST_TIM        0x000000FFU
+#define NGBE_MIS_PF_SM_SM              1
+
+/* Sensors for PVT(Process Voltage Temperature) */
+#define NGBE_TS_CTL                    0x10300
+#define NGBE_TS_EN                     0x10304
+#define NGBE_TS_ST                     0x10308
+#define NGBE_TS_ALARM_THRE             0x1030C
+#define NGBE_TS_DALARM_THRE            0x10310
+#define NGBE_TS_INT_EN                 0x10314
+#define NGBE_TS_ALARM_ST               0x10318
+#define NGBE_TS_ALARM_ST_DALARM        0x00000002U
+#define NGBE_TS_ALARM_ST_ALARM         0x00000001U
+
+#define NGBE_EFUSE_WDATA0              0x10320
+#define NGBE_EFUSE_WDATA1              0x10324
+#define NGBE_EFUSE_RDATA0              0x10328
+#define NGBE_EFUSE_RDATA1              0x1032C
+#define NGBE_EFUSE_STATUS              0x10330
+
+#define NGBE_TS_CTL_CALI_DONE          0x80000000U
+#define NGBE_TS_EN_ENA                 0x00000001U
+#define NGBE_TS_ST_DATA_OUT_MASK       0x000003FFU
+#define NGBE_TS_ALARM_THRE_MASK        0x000003FFU
+#define NGBE_TS_DALARM_THRE_MASK       0x000003FFU
+#define NGBE_TS_INT_EN_DALARM_INT_EN   0x00000002U
+#define NGBE_TS_INT_EN_ALARM_INT_EN    0x00000001U
+
+struct ngbe_thermal_diode_data {
+	s16 temp;
+	s16 alarm_thresh;
+	s16 dalarm_thresh;
+};
+
+struct ngbe_thermal_sensor_data {
+	struct ngbe_thermal_diode_data sensor;
+};
+
+/* FMGR Registers */
+#define NGBE_SPI_ILDR_STATUS            0x10120
+#define NGBE_SPI_ILDR_STATUS_PERST      0x00000001U /* PCIE_PERST is done */
+#define NGBE_SPI_ILDR_STATUS_PWRRST     0x00000002U /* Power on reset done */
+#define NGBE_SPI_ILDR_STATUS_SW_RESET    0x00000800U /* software reset done */
+#define NGBE_SPI_ILDR_STATUS_LAN0_SW_RST 0x00002000U /* lan0 soft reset done */
+#define NGBE_SPI_ILDR_STATUS_LAN1_SW_RST 0x00004000U /* lan1 soft reset done */
+#define NGBE_SPI_ILDR_STATUS_LAN2_SW_RST 0x00008000U /* lan2 soft reset done */
+#define NGBE_SPI_ILDR_STATUS_LAN3_SW_RST 0x00010000U /* lan3 soft reset done */
+
+#define NGBE_MAX_FLASH_LOAD_POLL_TIME  10
+
+#define NGBE_SPI_CMD                   0x10104
+#define NGBE_SPI_CMD_CMD(_v)           (((_v) & 0x7) << 28)
+#define NGBE_SPI_CMD_CLK(_v)           (((_v) & 0x7) << 25)
+#define NGBE_SPI_CMD_ADDR(_v)          (((_v) & 0x7FFFFF))
+
+#define NGBE_SPI_DATA                  0x10108
+#define NGBE_SPI_DATA_BYPASS           ((0x1) << 31)
+#define NGBE_SPI_DATA_STATUS(_v)       (((_v) & 0xFF) << 16)
+#define NGBE_SPI_DATA_OP_DONE          ((0x1))
+
+#define NGBE_SPI_STATUS                0x1010C
+#define NGBE_SPI_STATUS_OPDONE         ((0x1))
+#define NGBE_SPI_STATUS_FLASH_BYPASS   ((0x1) << 31)
+
+#define NGBE_SPI_USR_CMD               0x10110
+#define NGBE_SPI_CMDCFG0               0x10114
+#define NGBE_SPI_CMDCFG1               0x10118
+#define NGBE_SPI_ILDR_SWPTR            0x10124
+
+/************************* Port Registers ************************************/
+
+/* port cfg Registers */
+#define NGBE_CFG_PORT_CTL              0x14400
+#define NGBE_CFG_PORT_ST               0x14404
+#define NGBE_CFG_EX_VTYPE              0x14408
+#define NGBE_CFG_LED_CTL               0x14424
+
+/* internal phy reg_offset [0,31] */
+#define NGBE_PHY_CONFIG(reg_offset)    (0x14000 + ((reg_offset) * 4))
+
+#define NGBE_CFG_TCP_TIME              0x14420
+#define NGBE_CFG_TAG_TPID(_i)          (0x14430 + ((_i) * 4)) /* [0,3] */
+#define NGBE_CFG_LAN_SPEED             0x14440
+
+/* port cfg bit */
+#define NGBE_CFG_PORT_CTL_PFRSTD       0x00004000U /* Phy Function Reset Done */
+#define NGBE_CFG_PORT_CTL_D_VLAN       0x00000001U /* double vlan*/
+#define NGBE_CFG_PORT_CTL_ETAG_ETYPE_VLD 0x00000002U
+#define NGBE_CFG_PORT_CTL_QINQ         0x00000004U
+#define NGBE_CFG_PORT_CTL_DRV_LOAD     0x00000008U
+#define NGBE_CFG_PORT_CTL_NUM_VT_MASK  0x00001000U /* number of TVs */
+#define NGBE_CFG_PORT_CTL_NUM_VT_NONE  0x00000000U
+#define NGBE_CFG_PORT_CTL_NUM_VT_8    0x00001000U
+/* Status Bit */
+#define NGBE_CFG_PORT_ST_LINK_1000M    0x00000002U
+#define NGBE_CFG_PORT_ST_LINK_100M     0x00000004U
+#define NGBE_CFG_PORT_ST_LINK_10M      0x00000008U
+#define NGBE_CFG_PORT_ST_LAN_ID(_r)    ((0x00000300U & (_r)) >> 8)
+#define NGBE_LINK_UP_TIME              90
+
+/* LED CTL Bit */
+
+#define NGBE_CFG_LED_CTL_LINK_10M_SEL    0x00000008U
+#define NGBE_CFG_LED_CTL_LINK_100M_SEL   0x00000004U
+#define NGBE_CFG_LED_CTL_LINK_1G_SEL     0x00000002U
+#define NGBE_CFG_LED_CTL_LINK_OD_SHIFT   16
+/* LED modes */
+#define NGBE_LED_LINK_10M              NGBE_CFG_LED_CTL_LINK_10M_SEL
+#define NGBE_LED_LINK_1G               NGBE_CFG_LED_CTL_LINK_1G_SEL
+#define NGBE_LED_LINK_100M             NGBE_CFG_LED_CTL_LINK_100M_SEL
+
+/* GPIO Registers */
+#define NGBE_GPIO_DR                   0x14800
+#define NGBE_GPIO_DDR                  0x14804
+#define NGBE_GPIO_CTL                  0x14808
+#define NGBE_GPIO_INTEN                0x14830
+#define NGBE_GPIO_INTMASK              0x14834
+#define NGBE_GPIO_INTTYPE_LEVEL        0x14838
+#define NGBE_GPIO_POLARITY             0x1483C
+#define NGBE_GPIO_INTSTATUS            0x14840
+#define NGBE_GPIO_EOI                  0x1484C
+/*GPIO bit */
+#define NGBE_GPIO_DR_0         0x00000001U /* SDP0 Data Value */
+#define NGBE_GPIO_DR_1         0x00000002U /* SDP1 Data Value */
+#define NGBE_GPIO_DDR_0        0x00000001U /* SDP0 IO direction */
+#define NGBE_GPIO_DDR_1        0x00000002U /* SDP1 IO direction */
+#define NGBE_GPIO_CTL_SW_MODE  0x00000000U /* SDP software mode */
+#define NGBE_GPIO_INTEN_1      0x00000002U /* SDP1 interrupt enable */
+#define NGBE_GPIO_INTEN_2      0x00000004U /* SDP2 interrupt enable */
+#define NGBE_GPIO_INTEN_3      0x00000008U /* SDP3 interrupt enable */
+#define NGBE_GPIO_INTEN_5      0x00000020U /* SDP5 interrupt enable */
+#define NGBE_GPIO_INTEN_6      0x00000040U /* SDP6 interrupt enable */
+#define NGBE_GPIO_INTTYPE_LEVEL_2 0x00000004U /* SDP2 interrupt type level */
+#define NGBE_GPIO_INTTYPE_LEVEL_3 0x00000008U /* SDP3 interrupt type level */
+#define NGBE_GPIO_INTTYPE_LEVEL_5 0x00000020U /* SDP5 interrupt type level */
+#define NGBE_GPIO_INTTYPE_LEVEL_6 0x00000040U /* SDP6 interrupt type level */
+#define NGBE_GPIO_INTSTATUS_1  0x00000002U /* SDP1 interrupt status */
+#define NGBE_GPIO_INTSTATUS_2  0x00000004U /* SDP2 interrupt status */
+#define NGBE_GPIO_INTSTATUS_3  0x00000008U /* SDP3 interrupt status */
+#define NGBE_GPIO_INTSTATUS_5  0x00000020U /* SDP5 interrupt status */
+#define NGBE_GPIO_INTSTATUS_6  0x00000040U /* SDP6 interrupt status */
+#define NGBE_GPIO_EOI_2        0x00000004U /* SDP2 interrupt clear */
+#define NGBE_GPIO_EOI_3        0x00000008U /* SDP3 interrupt clear */
+#define NGBE_GPIO_EOI_5        0x00000020U /* SDP5 interrupt clear */
+#define NGBE_GPIO_EOI_6        0x00000040U /* SDP6 interrupt clear */
+
+/* TPH registers */
+#define NGBE_CFG_TPH_TDESC     0x14F00 /* TPH conf for Tx desc write back */
+#define NGBE_CFG_TPH_RDESC     0x14F04 /* TPH conf for Rx desc write back */
+#define NGBE_CFG_TPH_RHDR      0x14F08 /* TPH conf for writing Rx pkt header */
+#define NGBE_CFG_TPH_RPL       0x14F0C /* TPH conf for payload write access */
+/* TPH bit */
+#define NGBE_CFG_TPH_TDESC_EN  0x80000000U
+#define NGBE_CFG_TPH_TDESC_PH_SHIFT 29
+#define NGBE_CFG_TPH_TDESC_ST_SHIFT 16
+#define NGBE_CFG_TPH_RDESC_EN  0x80000000U
+#define NGBE_CFG_TPH_RDESC_PH_SHIFT 29
+#define NGBE_CFG_TPH_RDESC_ST_SHIFT 16
+#define NGBE_CFG_TPH_RHDR_EN   0x00008000U
+#define NGBE_CFG_TPH_RHDR_PH_SHIFT 13
+#define NGBE_CFG_TPH_RHDR_ST_SHIFT 0
+#define NGBE_CFG_TPH_RPL_EN    0x80000000U
+#define NGBE_CFG_TPH_RPL_PH_SHIFT 29
+#define NGBE_CFG_TPH_RPL_ST_SHIFT 16
+
+/*********************** Transmit DMA registers **************************/
+/* transmit global control */
+#define NGBE_TDM_CTL           0x18000
+#define NGBE_TDM_POOL_TE       0x18004
+#define NGBE_TDM_PB_THRE       0x18020
+
+#define NGBE_TDM_LLQ           0x18040
+#define NGBE_TDM_ETYPE_LB_L    0x18050
+
+#define NGBE_TDM_ETYPE_AS_L    0x18058
+#define NGBE_TDM_MAC_AS_L      0x18060
+
+#define NGBE_TDM_VLAN_AS_L     0x18070
+
+#define NGBE_TDM_TCP_FLG_L     0x18078
+#define NGBE_TDM_TCP_FLG_H     0x1807C
+#define NGBE_TDM_VLAN_INS(_i)  (0x18100 + ((_i) * 4)) /* 8 of these 0 - 7 */
+/* TDM CTL BIT */
+#define NGBE_TDM_CTL_TE        0x1 /* Transmit Enable */
+#define NGBE_TDM_CTL_PADDING   0x2 /* Padding byte number for ipsec ESP */
+#define NGBE_TDM_CTL_VT_SHIFT  16  /* VLAN EtherType */
+/* Per VF Port VLAN insertion rules */
+#define NGBE_TDM_VLAN_INS_VLANA_DEFAULT 0x40000000U /*Always use default VLAN*/
+#define NGBE_TDM_VLAN_INS_VLANA_NEVER   0x80000000U /* Never insert VLAN tag */
+
+#define NGBE_TDM_RP_CTL_RST    ((0x1) << 0)
+#define NGBE_TDM_RP_CTL_RPEN   ((0x1) << 2)
+#define NGBE_TDM_RP_CTL_RLEN   ((0x1) << 3)
+#define NGBE_TDM_RP_RATE_MIN(v) ((0x3FFF & (v)))
+#define NGBE_TDM_RP_RATE_MAX(v) ((0x3FFF & (v)) << 16)
+
+/* qos */
+#define NGBE_TDM_PBWARB_CTL    0x18200
+#define NGBE_TDM_VM_CREDIT_VAL(v) (0x3FF & (v))
+
+/* etag */
+#define NGBE_TDM_ETAG_INS(_i)  (0x18700 + ((_i) * 4)) /* 8 of these 0 - 7 */
+/* statistic */
+#define NGBE_TDM_DRP_CNT       0x18300
+#define NGBE_TDM_SEC_DRP       0x18304
+#define NGBE_TDM_PKT_CNT       0x18308
+#define NGBE_TDM_BYTE_CNT_L    0x1830C
+#define NGBE_TDM_BYTE_CNT_H    0x18310
+#define NGBE_TDM_OS2BMC_CNT    0x18314
+
+/**************************** Receive DMA registers **************************/
+/* receive control */
+#define NGBE_RDM_ARB_CTL       0x12000
+#define NGBE_RDM_POOL_RE       0x12004
+
+#define NGBE_RDM_PF_QDE        0x12080
+#define NGBE_RDM_PF_HIDE       0x12090
+/* VFRE bitmask */
+#define NGBE_RDM_POOL_RE_ENABLE_ALL  0xFFFFFFFFU
+
+/* statistic */
+#define NGBE_RDM_DRP_PKT           0x12500
+#define NGBE_RDM_PKT_CNT           0x12504
+#define NGBE_RDM_BYTE_CNT_L        0x12508
+#define NGBE_RDM_BYTE_CNT_H        0x1250C
+#define NGBE_RDM_BMC2OS_CNT        0x12510
+
+/***************************** RDB registers *********************************/
+/* Flow Control Registers */
+#define NGBE_RDB_RFCV              0x19200
+#define NGBE_RDB_RFCL              0x19220
+#define NGBE_RDB_RFCH              0x19260
+#define NGBE_RDB_RFCRT             0x192A0
+#define NGBE_RDB_RFCC              0x192A4
+/* receive packet buffer */
+#define NGBE_RDB_PB_WRAP           0x19004
+#define NGBE_RDB_PB_SZ             0x19020
+
+#define NGBE_RDB_PB_CTL            0x19000
+#define NGBE_RDB_PB_SZ_SHIFT       10
+#define NGBE_RDB_PB_SZ_MASK        0x000FFC00U
+/* lli interrupt */
+#define NGBE_RDB_LLI_THRE          0x19080
+#define NGBE_RDB_LLI_THRE_SZ(_v)   ((0xFFF & (_v)))
+#define NGBE_RDB_LLI_THRE_UP(_v)   ((0x7 & (_v)) << 16)
+#define NGBE_RDB_LLI_THRE_UP_SHIFT 16
+
+/* ring assignment */
+#define NGBE_RDB_PL_CFG(_i)    (0x19300 + ((_i) * 4)) /* [0,7] */
+#define NGBE_RDB_RSSTBL(_i)    (0x19400 + ((_i) * 4)) /* [0,31] */
+#define NGBE_RDB_RSSRK(_i)     (0x19480 + ((_i) * 4)) /* [0,9] */
+#define NGBE_RDB_RA_CTL         0x194F4
+#define NGBE_RDB_5T_SDP(_i)    (0x19A00 + ((_i) * 4)) /*Src Dst Addr Q Filter*/
+#define NGBE_RDB_5T_CTL0(_i)   (0x19C00 + ((_i) * 4)) /* Five Tuple Q Filter */
+#define NGBE_RDB_ETYPE_CLS(_i) (0x19100 + ((_i) * 4)) /* EType Q Select */
+#define NGBE_RDB_SYN_CLS       0x19130
+#define NGBE_RDB_5T_CTL1(_i)   (0x19E00 + ((_i) * 4)) /*8 of these (0-7)*/
+/* VM RSS */
+#define NGBE_RDB_VMRSSRK(_i, _p)   (0x1A000 + ((_i) * 4) + ((_p) * 0x40))
+#define NGBE_RDB_VMRSSTBL(_i, _p)  (0x1B000 + ((_i) * 4) + ((_p) * 0x40))
+/* statistic */
+#define NGBE_RDB_MPCNT             0x19040
+#define NGBE_RDB_PKT_CNT           0x19060
+#define NGBE_RDB_REPLI_CNT         0x19064
+#define NGBE_RDB_DRP_CNT           0x19068
+#define NGBE_RDB_LXONTXC           0x1921C
+#define NGBE_RDB_LXOFFTXC          0x19218
+#define NGBE_RDB_PFCMACDAL         0x19210
+#define NGBE_RDB_PFCMACDAH         0x19214
+#define NGBE_RDB_TXSWERR           0x1906C
+#define NGBE_RDB_TXSWERR_TB_FREE   0x3FF
+/* rdb_pl_cfg reg mask */
+#define NGBE_RDB_PL_CFG_L4HDR          0x2
+#define NGBE_RDB_PL_CFG_L3HDR          0x4
+#define NGBE_RDB_PL_CFG_L2HDR          0x8
+#define NGBE_RDB_PL_CFG_TUN_OUTER_L2HDR 0x20
+#define NGBE_RDB_PL_CFG_TUN_TUNHDR     0x10
+/* RQTC Bit Masks and Shifts */
+#define NGBE_RDB_RSS_TC_SHIFT_TC(_i)   ((_i) * 4)
+#define NGBE_RDB_RSS_TC_TC0_MASK       (0x7 << 0)
+#define NGBE_RDB_RSS_TC_TC1_MASK       (0x7 << 4)
+#define NGBE_RDB_RSS_TC_TC2_MASK       (0x7 << 8)
+#define NGBE_RDB_RSS_TC_TC3_MASK       (0x7 << 12)
+#define NGBE_RDB_RSS_TC_TC4_MASK       (0x7 << 16)
+#define NGBE_RDB_RSS_TC_TC5_MASK       (0x7 << 20)
+#define NGBE_RDB_RSS_TC_TC6_MASK       (0x7 << 24)
+#define NGBE_RDB_RSS_TC_TC7_MASK       (0x7 << 28)
+/* Packet Buffer Initialization */
+#define NGBE_MAX_PACKET_BUFFERS        8
+#define NGBE_RDB_PB_SZ_48KB    0x00000030U /* 48KB Packet Buffer */
+#define NGBE_RDB_PB_SZ_64KB    0x00000040U /* 64KB Packet Buffer */
+#define NGBE_RDB_PB_SZ_80KB    0x00000050U /* 80KB Packet Buffer */
+#define NGBE_RDB_PB_SZ_128KB   0x00000080U /* 128KB Packet Buffer */
+#define NGBE_RDB_PB_SZ_MAX     0x00000200U /* 512KB Packet Buffer */
+
+/* Packet buffer allocation strategies */
+enum {
+	PBA_STRATEGY_EQUAL      = 0, /* Distribute PB space equally */
+#define PBA_STRATEGY_EQUAL      PBA_STRATEGY_EQUAL
+	PBA_STRATEGY_WEIGHTED   = 1, /* Weight front half of TCs */
+#define PBA_STRATEGY_WEIGHTED   PBA_STRATEGY_WEIGHTED
+};
+
+/* FCRTL Bit Masks */
+#define NGBE_RDB_RFCL_XONE             0x80000000U /* XON enable */
+#define NGBE_RDB_RFCH_XOFFE            0x80000000U /* Packet buffer fc enable */
+/* FCCFG Bit Masks */
+#define NGBE_RDB_RFCC_RFCE_802_3X      0x00000008U /* Tx link FC enable */
+
+/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
+#define NGBE_RDB_5T_CTL1_SIZE_BP       0x00001000U /* Packet size bypass */
+#define NGBE_RDB_5T_CTL1_LLI           0x00100000U /* Enables low latency Int */
+#define NGBE_RDB_LLI_THRE_PRIORITY_MASK 0x00070000U /* VLAN priority mask */
+#define NGBE_RDB_LLI_THRE_PRIORITY_EN  0x00080000U /* VLAN priority enable */
+
+#define NGBE_MAX_RDB_5T_CTL0_FILTERS           128
+#define NGBE_RDB_5T_CTL0_PROTOCOL_MASK         0x00000003U
+#define NGBE_RDB_5T_CTL0_PROTOCOL_TCP          0x00000000U
+#define NGBE_RDB_5T_CTL0_PROTOCOL_UDP          0x00000001U
+#define NGBE_RDB_5T_CTL0_PROTOCOL_SCTP         2
+#define NGBE_RDB_5T_CTL0_PRIORITY_MASK         0x00000007U
+#define NGBE_RDB_5T_CTL0_PRIORITY_SHIFT        2
+#define NGBE_RDB_5T_CTL0_POOL_MASK             0x0000003FU
+#define NGBE_RDB_5T_CTL0_POOL_SHIFT            8
+#define NGBE_RDB_5T_CTL0_5TUPLE_MASK_MASK      0x00000007U
+#define NGBE_RDB_5T_CTL0_5TUPLE_MASK_SHIFT     27
+#define NGBE_RDB_5T_CTL0_SOURCE_PORT_MASK      0x1B
+#define NGBE_RDB_5T_CTL0_DEST_PORT_MASK        0x05
+#define NGBE_RDB_5T_CTL0_PROTOCOL_COMP_MASK    0x0F
+#define NGBE_RDB_5T_CTL0_POOL_MASK_EN          0x40000000U
+#define NGBE_RDB_5T_CTL0_QUEUE_ENABLE          0x80000000U
+
+#define NGBE_RDB_ETYPE_CLS_RX_QUEUE            0x007F0000U /* bits 22:16 */
+#define NGBE_RDB_ETYPE_CLS_RX_QUEUE_SHIFT      16
+#define NGBE_RDB_ETYPE_CLS_LLI                 0x20000000U /* bit 29 */
+#define NGBE_RDB_ETYPE_CLS_QUEUE_EN            0x80000000U /* bit 31 */
+
+/* Receive Config masks */
+#define NGBE_RDB_PB_CTL_PBEN           (0x80000000) /* Enable Receiver */
+#define NGBE_RDB_PB_CTL_DISABLED       0x1
+
+#define NGBE_RDB_RA_CTL_RSS_EN         0x00000004U /* RSS Enable */
+#define NGBE_RDB_RA_CTL_RSS_MASK       0xFFFF0000U
+#define NGBE_RDB_RA_CTL_RSS_IPV4_TCP   0x00010000U
+#define NGBE_RDB_RA_CTL_RSS_IPV4       0x00020000U
+#define NGBE_RDB_RA_CTL_RSS_IPV6       0x00100000U
+#define NGBE_RDB_RA_CTL_RSS_IPV6_TCP   0x00200000U
+#define NGBE_RDB_RA_CTL_RSS_IPV4_UDP   0x00400000U
+#define NGBE_RDB_RA_CTL_RSS_IPV6_UDP   0x00800000U
+
+/******************************* PSR Registers *******************************/
+/* psr control */
+#define NGBE_PSR_CTL                   0x15000
+#define NGBE_PSR_VLAN_CTL              0x15088
+#define NGBE_PSR_VM_CTL                0x151B0
+#define NGBE_PSR_PKT_CNT               0x151B8
+#define NGBE_PSR_MNG_PKT_CNT           0x151BC
+#define NGBE_PSR_DBG_DOP_CNT           0x151C0
+#define NGBE_PSR_MNG_DOP_CNT           0x151C4
+#define NGBE_PSR_VM_FLP_L              0x151C8
+
+/* Header split receive */
+#define NGBE_PSR_CTL_SW_EN             0x00040000U
+#define NGBE_PSR_CTL_PCSD              0x00002000U
+#define NGBE_PSR_CTL_IPPCSE            0x00001000U
+#define NGBE_PSR_CTL_BAM               0x00000400U
+#define NGBE_PSR_CTL_UPE               0x00000200U
+#define NGBE_PSR_CTL_MPE               0x00000100U
+#define NGBE_PSR_CTL_MFE               0x00000080U
+#define NGBE_PSR_CTL_MO                0x00000060U
+#define NGBE_PSR_CTL_TPE               0x00000010U
+#define NGBE_PSR_CTL_MO_SHIFT          5
+/* VT_CTL bitmasks */
+#define NGBE_PSR_VM_CTL_DIS_DEFPL      0x20000000U /* disable default pool */
+#define NGBE_PSR_VM_CTL_REPLEN         0x40000000U /* replication enabled */
+#define NGBE_PSR_VM_CTL_POOL_SHIFT     7
+#define NGBE_PSR_VM_CTL_POOL_MASK      (0x7 << NGBE_PSR_VM_CTL_POOL_SHIFT)
+/* VLAN Control Bit Masks */
+#define NGBE_PSR_VLAN_CTL_VET          0x0000FFFFU  /* bits 0-15 */
+#define NGBE_PSR_VLAN_CTL_CFI          0x10000000U  /* bit 28 */
+#define NGBE_PSR_VLAN_CTL_CFIEN        0x20000000U  /* bit 29 */
+#define NGBE_PSR_VLAN_CTL_VFE          0x40000000U  /* bit 30 */
+
+/* vm L2 contorl */
+#define NGBE_PSR_VM_L2CTL(_i)          (0x15600 + ((_i) * 4))
+/* VMOLR bitmasks */
+#define NGBE_PSR_VM_L2CTL_LBDIS        0x00000002U /* disable loopback */
+#define NGBE_PSR_VM_L2CTL_LLB          0x00000004U /* local pool loopback */
+#define NGBE_PSR_VM_L2CTL_UPE          0x00000010U /* unicast promiscuous */
+#define NGBE_PSR_VM_L2CTL_TPE          0x00000020U /* ETAG promiscuous */
+#define NGBE_PSR_VM_L2CTL_VACC         0x00000040U /* accept nomatched vlan */
+#define NGBE_PSR_VM_L2CTL_VPE          0x00000080U /* vlan promiscuous mode */
+#define NGBE_PSR_VM_L2CTL_AUPE         0x00000100U /* accept untagged packets */
+#define NGBE_PSR_VM_L2CTL_ROMPE        0x00000200U /*accept packets in MTA tbl*/
+#define NGBE_PSR_VM_L2CTL_ROPE         0x00000400U /* accept packets in UC tbl*/
+#define NGBE_PSR_VM_L2CTL_BAM          0x00000800U /* accept broadcast packets*/
+#define NGBE_PSR_VM_L2CTL_MPE          0x00001000U /* multicast promiscuous */
+
+/* etype switcher 1st stage */
+#define NGBE_PSR_ETYPE_SWC(_i) (0x15128 + ((_i) * 4)) /* EType Queue Filter */
+/* ETYPE Queue Filter/Select Bit Masks */
+#define NGBE_MAX_PSR_ETYPE_SWC_FILTERS         8
+#define NGBE_PSR_ETYPE_SWC_FCOE                0x08000000U /* bit 27 */
+#define NGBE_PSR_ETYPE_SWC_TX_ANTISPOOF        0x20000000U /* bit 29 */
+#define NGBE_PSR_ETYPE_SWC_1588                0x40000000U /* bit 30 */
+#define NGBE_PSR_ETYPE_SWC_FILTER_EN           0x80000000U /* bit 31 */
+#define NGBE_PSR_ETYPE_SWC_POOL_ENABLE         (1 << 26) /* bit 26 */
+#define NGBE_PSR_ETYPE_SWC_POOL_SHIFT          20
+/*
+ * ETQF filter list: one static filter per filter consumer. This is
+ *                 to avoid filter collisions later. Add new filters
+ *                 here!!
+ *
+ * Current filters:
+ *      EAPOL 802.1x (0x888e): Filter 0
+ *      FCoE (0x8906):   Filter 2
+ *      1588 (0x88f7):   Filter 3
+ *      FIP  (0x8914):   Filter 4
+ *      LLDP (0x88CC):   Filter 5
+ *      LACP (0x8809):   Filter 6
+ *      FC   (0x8808):   Filter 7
+ */
+#define NGBE_PSR_ETYPE_SWC_FILTER_EAPOL        0
+#define NGBE_PSR_ETYPE_SWC_FILTER_FCOE         2
+#define NGBE_PSR_ETYPE_SWC_FILTER_1588         3
+#define NGBE_PSR_ETYPE_SWC_FILTER_FIP          4
+#define NGBE_PSR_ETYPE_SWC_FILTER_LLDP         5
+#define NGBE_PSR_ETYPE_SWC_FILTER_LACP         6
+#define NGBE_PSR_ETYPE_SWC_FILTER_FC           7
+
+/* mcasst/ucast overflow tbl */
+#define NGBE_PSR_MC_TBL(_i)    (0x15200  + ((_i) * 4))
+#define NGBE_PSR_UC_TBL(_i)    (0x15400 + ((_i) * 4))
+
+/* vlan tbl */
+#define NGBE_PSR_VLAN_TBL(_i)  (0x16000 + ((_i) * 4))
+
+/* mac switcher */
+#define NGBE_PSR_MAC_SWC_AD_L  0x16200
+#define NGBE_PSR_MAC_SWC_AD_H  0x16204
+#define NGBE_PSR_MAC_SWC_VM    0x16208
+#define NGBE_PSR_MAC_SWC_IDX   0x16210
+/* RAH */
+#define NGBE_PSR_MAC_SWC_AD_H_AD(v)       (((v) & 0xFFFF))
+#define NGBE_PSR_MAC_SWC_AD_H_ADTYPE(v)   (((v) & 0x1) << 30)
+#define NGBE_PSR_MAC_SWC_AD_H_AV       0x80000000U
+#define NGBE_CLEAR_VMDQ_ALL            0xFFFFFFFFU
+
+/* vlan switch */
+#define NGBE_PSR_VLAN_SWC      0x16220
+#define NGBE_PSR_VLAN_SWC_VM_L 0x16224
+#define NGBE_PSR_VLAN_SWC_IDX  0x16230         /* 32 vlan entries */
+/* VLAN pool filtering masks */
+#define NGBE_PSR_VLAN_SWC_VIEN         0x80000000U  /* filter is valid */
+#define NGBE_PSR_VLAN_SWC_ENTRIES      32
+#define NGBE_PSR_VLAN_SWC_VLANID_MASK  0x00000FFFU
+#define NGBE_ETHERNET_IEEE_VLAN_TYPE   0x8100  /* 802.1q protocol */
+
+/* Manangbeent */
+#define NGBE_PSR_MNG_FIT_CTL           0x15820
+/* Manangbeent Bit Fields and Masks */
+#define NGBE_PSR_MNG_FIT_CTL_MPROXYE    0x40000000U /* Manangbeent Proxy Enable*/
+#define NGBE_PSR_MNG_FIT_CTL_RCV_TCO_EN 0x00020000U /* Rcv TCO packet enable */
+#define NGBE_PSR_MNG_FIT_CTL_EN_BMC2OS  0x10000000U /* Ena BMC2OS and OS2BMC
+													  *traffic */
+#define NGBE_PSR_MNG_FIT_CTL_EN_BMC2OS_SHIFT   28
+
+#define NGBE_PSR_MNG_FLEX_SEL  0x1582C
+#define NGBE_PSR_MNG_FLEX_DW_L(_i) (0x15A00 + ((_i) * 16)) /* [0,15] */
+#define NGBE_PSR_MNG_FLEX_DW_H(_i) (0x15A04 + ((_i) * 16))
+#define NGBE_PSR_MNG_FLEX_MSK(_i)  (0x15A08 + ((_i) * 16))
+
+/* mirror */
+#define NGBE_PSR_MR_CTL(_i)    (0x15B00 + ((_i) * 4)) /* [0,3] */
+#define NGBE_PSR_MR_VLAN_L(_i) (0x15B10 + ((_i) * 8))
+#define NGBE_PSR_MR_VM_L(_i)   (0x15B30 + ((_i) * 8))
+
+/* 1588 */
+#define NGBE_PSR_1588_CTL      0x15188 /* Rx Time Sync Control register - RW */
+#define NGBE_PSR_1588_STMPL    0x151E8 /* Rx timestamp Low - RO */
+#define NGBE_PSR_1588_STMPH    0x151A4 /* Rx timestamp High - RO */
+#define NGBE_PSR_1588_ATTRL    0x151A0 /* Rx timestamp attribute low - RO */
+#define NGBE_PSR_1588_ATTRH    0x151A8 /* Rx timestamp attribute high - RO */
+#define NGBE_PSR_1588_MSGTYPE  0x15120 /* RX message type register low - RW */
+/* 1588 CTL Bit */
+#define NGBE_PSR_1588_CTL_VALID            0x00000001U /* Rx timestamp valid */
+#define NGBE_PSR_1588_CTL_TYPE_MASK        0x0000000EU /* Rx type mask */
+#define NGBE_PSR_1588_CTL_TYPE_L2_V2       0x00
+#define NGBE_PSR_1588_CTL_TYPE_L4_V1       0x02
+#define NGBE_PSR_1588_CTL_TYPE_L2_L4_V2    0x04
+#define NGBE_PSR_1588_CTL_TYPE_EVENT_V2    0x0A
+#define NGBE_PSR_1588_CTL_ENABLED          0x00000010U /* Rx Timestamp enabled*/
+/* 1588 msg type bit */
+#define NGBE_PSR_1588_MSGTYPE_V1_CTRLT_MASK            0x000000FFU
+#define NGBE_PSR_1588_MSGTYPE_V1_SYNC_MSG              0x00
+#define NGBE_PSR_1588_MSGTYPE_V1_DELAY_REQ_MSG         0x01
+#define NGBE_PSR_1588_MSGTYPE_V1_FOLLOWUP_MSG          0x02
+#define NGBE_PSR_1588_MSGTYPE_V1_DELAY_RESP_MSG        0x03
+#define NGBE_PSR_1588_MSGTYPE_V1_MGMT_MSG              0x04
+#define NGBE_PSR_1588_MSGTYPE_V2_MSGID_MASK            0x0000FF00U
+#define NGBE_PSR_1588_MSGTYPE_V2_SYNC_MSG              0x0000
+#define NGBE_PSR_1588_MSGTYPE_V2_DELAY_REQ_MSG         0x0100
+#define NGBE_PSR_1588_MSGTYPE_V2_PDELAY_REQ_MSG        0x0200
+#define NGBE_PSR_1588_MSGTYPE_V2_PDELAY_RESP_MSG       0x0300
+#define NGBE_PSR_1588_MSGTYPE_V2_FOLLOWUP_MSG          0x0800
+#define NGBE_PSR_1588_MSGTYPE_V2_DELAY_RESP_MSG        0x0900
+#define NGBE_PSR_1588_MSGTYPE_V2_PDELAY_FOLLOWUP_MSG   0x0A00
+#define NGBE_PSR_1588_MSGTYPE_V2_ANNOUNCE_MSG          0x0B00
+#define NGBE_PSR_1588_MSGTYPE_V2_SIGNALLING_MSG        0x0C00
+#define NGBE_PSR_1588_MSGTYPE_V2_MGMT_MSG              0x0D00
+
+/* Wake up registers */
+#define NGBE_PSR_WKUP_CTL      0x15B80
+#define NGBE_PSR_WKUP_IPV      0x15B84
+#define NGBE_PSR_LAN_FLEX_SEL  0x15B8C
+#define NGBE_PSR_WKUP_IP4TBL(_i)       (0x15BC0 + ((_i) * 4)) /* [0,3] */
+#define NGBE_PSR_WKUP_IP6TBL(_i)       (0x15BE0 + ((_i) * 4))
+#define NGBE_PSR_LAN_FLEX_DW_L(_i)     (0x15C00 + ((_i) * 16)) /* [0,15] */
+#define NGBE_PSR_LAN_FLEX_DW_H(_i)     (0x15C04 + ((_i) * 16))
+#define NGBE_PSR_LAN_FLEX_MSK(_i)      (0x15C08 + ((_i) * 16))
+#define NGBE_PSR_LAN_FLEX_CTL  0x15CFC
+/* Wake Up Filter Control Bit */
+#define NGBE_PSR_WKUP_CTL_LNKC 0x00000001U /* Link Status Change Wakeup Enable*/
+#define NGBE_PSR_WKUP_CTL_MAG  0x00000002U /* Magic Packet Wakeup Enable */
+#define NGBE_PSR_WKUP_CTL_EX   0x00000004U /* Directed Exact Wakeup Enable */
+#define NGBE_PSR_WKUP_CTL_MC   0x00000008U /* Directed Multicast Wakeup Enable*/
+#define NGBE_PSR_WKUP_CTL_BC   0x00000010U /* Broadcast Wakeup Enable */
+#define NGBE_PSR_WKUP_CTL_ARP  0x00000020U /* ARP Request Packet Wakeup Enable*/
+#define NGBE_PSR_WKUP_CTL_IPV4 0x00000040U /* Directed IPv4 Pkt Wakeup Enable */
+#define NGBE_PSR_WKUP_CTL_IPV6 0x00000080U /* Directed IPv6 Pkt Wakeup Enable */
+#define NGBE_PSR_WKUP_CTL_IGNORE_TCO   0x00008000U /* Ignore WakeOn TCO pkts */
+#define NGBE_PSR_WKUP_CTL_FLX0         0x00010000U /* Flexible Filter 0 Ena */
+#define NGBE_PSR_WKUP_CTL_FLX1         0x00020000U /* Flexible Filter 1 Ena */
+#define NGBE_PSR_WKUP_CTL_FLX2         0x00040000U /* Flexible Filter 2 Ena */
+#define NGBE_PSR_WKUP_CTL_FLX3         0x00080000U /* Flexible Filter 3 Ena */
+#define NGBE_PSR_WKUP_CTL_FLX4         0x00100000U /* Flexible Filter 4 Ena */
+#define NGBE_PSR_WKUP_CTL_FLX5         0x00200000U /* Flexible Filter 5 Ena */
+#define NGBE_PSR_WKUP_CTL_FLX_FILTERS  0x000F0000U /* Mask for 4 flex filters */
+#define NGBE_PSR_WKUP_CTL_FLX_FILTERS_6 0x003F0000U /* Mask for 6 flex filters*/
+#define NGBE_PSR_WKUP_CTL_FLX_FILTERS_8 0x00FF0000U /* Mask for 8 flex filters*/
+#define NGBE_PSR_WKUP_CTL_FW_RST_WK    0x80000000U /* Ena wake on FW reset
+													 * assertion */
+/* Mask for Ext. flex filters */
+#define NGBE_PSR_WKUP_CTL_EXT_FLX_FILTERS  0x00300000U
+#define NGBE_PSR_WKUP_CTL_ALL_FILTERS   0x000F00FFU /* Mask all 4 flex filters*/
+#define NGBE_PSR_WKUP_CTL_ALL_FILTERS_6 0x003F00FFU /* Mask all 6 flex filters*/
+#define NGBE_PSR_WKUP_CTL_ALL_FILTERS_8 0x00FF00FFU /* Mask all 8 flex filters*/
+#define NGBE_PSR_WKUP_CTL_FLX_OFFSET    16 /* Offset to the Flex Filters bits*/
+
+#define NGBE_PSR_MAX_SZ                0x15020
+
+/****************************** TDB ******************************************/
+#define NGBE_TDB_RFCS                  0x1CE00
+#define NGBE_TDB_PB_SZ                  0x1CC00
+
+#define NGBE_TDB_PRB_CTL               0x17010
+#define NGBE_TDB_PBRARB_CTL            0x1CD00
+
+#define NGBE_TDB_PB_SZ_MAX     0x00005000U /* 20KB Packet Buffer */
+#define NGBE_TXPKT_SIZE_MAX    0xA /* Max Tx Packet size */
+#define NGBE_MAX_PB            8
+/* statistic */
+#define NGBE_TDB_OUT_PKT_CNT           0x1CF00
+#define NGBE_TDB_MNG_PKT_CNT           0x1CF04
+#define NGBE_TDB_LB_PKT_CNT            0x1CF08
+#define NGBE_TDB_MNG_LARGE_DOP_CNT     0x1CF0C
+
+/****************************** TSEC *****************************************/
+/* Security Control Registers */
+#define NGBE_TSEC_CTL                   0x1D000
+#define NGBE_TSEC_ST                    0x1D004
+#define NGBE_TSEC_BUF_AF                0x1D008
+#define NGBE_TSEC_BUF_AE                0x1D00C
+#define NGBE_TSEC_MIN_IFG               0x1D020
+
+/* 1588 */
+#define NGBE_TSEC_1588_CTL              0x11F00 /* Tx Time Sync Control reg */
+#define NGBE_TSEC_1588_STMPL            0x11F04 /* Tx timestamp value Low */
+#define NGBE_TSEC_1588_STMPH            0x11F08 /* Tx timestamp value High */
+#define NGBE_TSEC_1588_SYSTIML          0x11F0C /* System time register Low */
+#define NGBE_TSEC_1588_SYSTIMH          0x11F10 /* System time register High */
+#define NGBE_TSEC_1588_INC              0x11F14 /* Increment attributes reg */
+#define NGBE_TSEC_1588_INC_IV(v)        ((v) & 0x7FFFFFF)
+
+#define NGBE_TSEC_1588_ADJL             0x11F18 /* Time Adjustment Offset reg Low */
+#define NGBE_TSEC_1588_ADJH             0x11F1C /* Time Adjustment Offset reg High*/
+
+#define NGBE_TSEC_1588_INT_ST           0x11F20
+#define NGBE_TSEC_1588_INT_EN           0x11F24
+
+/* 1588 fields */
+#define NGBE_TSEC_1588_CTL_VALID    0x00000001U /* Tx timestamp valid */
+#define NGBE_TSEC_1588_CTL_ENABLED  0x00000010U /* Tx timestamping enabled */
+
+#define NGBE_TSEC_1588_AUX_CTL          0x11F28
+#define NGBE_TSEC_1588_TRGT_L(i)        (0x11F2C + ((i) * 8)) /* [0,1] */
+#define NGBE_TSEC_1588_TRGT_H(i)        (0x11F30 + ((i) * 8)) /* [0,1] */
+#define NGBE_TSEC_1588_FREQ_CLK_L(i)    (0x11F3C + ((i) * 8)) /* [0,1] */
+#define NGBE_TSEC_1588_FREQ_CLK_H(i)    (0x11F40 + ((i) * 8)) /* [0,1] */
+#define NGBE_TSEC_1588_AUX_STMP_L(i)    (0x11F4C + ((i) * 8)) /* [0,1] */
+#define NGBE_TSEC_1588_AUX_STMP_H(i)    (0x11F50 + ((i) * 8)) /* [0,1] */
+#define NGBE_TSEC_1588_SDP(n)           (0x11F5C + ((n) * 4)) /* [0,3] */
+
+/********************************* RSEC **************************************/
+/* general rsec */
+#define NGBE_RSEC_CTL                   0x17000
+#define NGBE_RSEC_ST                    0x17004
+/* general rsec fields */
+#define NGBE_RSEC_CTL_SECRX_DIS         0x00000001U
+#define NGBE_RSEC_CTL_RX_DIS            0x00000002U
+#define NGBE_RSEC_CTL_CRC_STRIP         0x00000004U
+#define NGBE_RSEC_CTL_SAVE_MAC_ERR      0x00000040U
+#define NGBE_RSEC_ST_RSEC_RDY           0x00000001U
+#define NGBE_RSEC_ST_RSEC_OFLD_DIS      0x00000002U
+#define NGBE_RSEC_ST_ECC_RXERR          0x00000004U
+
+/* link sec */
+#define NGBE_RSEC_LSEC_CAP              0x17200
+#define NGBE_RSEC_LSEC_CTL              0x17204
+#define NGBE_RSEC_LSEC_SCI_L            0x17208
+#define NGBE_RSEC_LSEC_SCI_H            0x1720C
+#define NGBE_RSEC_LSEC_SA0              0x17210
+#define NGBE_RSEC_LSEC_SA1              0x17214
+#define NGBE_RSEC_LSEC_PKNUM0           0x17218
+#define NGBE_RSEC_LSEC_PKNUM1           0x1721C
+#define NGBE_RSEC_LSEC_KEY0(_n)         0x17220
+#define NGBE_RSEC_LSEC_KEY1(_n)         0x17230
+#define NGBE_RSEC_LSEC_UNTAG_PKT        0x17240
+#define NGBE_RSEC_LSEC_DEC_OCTET        0x17244
+#define NGBE_RSEC_LSEC_VLD_OCTET        0x17248
+#define NGBE_RSEC_LSEC_BAD_PKT          0x1724C
+#define NGBE_RSEC_LSEC_NOSCI_PKT        0x17250
+#define NGBE_RSEC_LSEC_UNSCI_PKT        0x17254
+#define NGBE_RSEC_LSEC_UNCHK_PKT        0x17258
+#define NGBE_RSEC_LSEC_DLY_PKT          0x1725C
+#define NGBE_RSEC_LSEC_LATE_PKT         0x17260
+#define NGBE_RSEC_LSEC_OK_PKT(_n)       0x17264
+#define NGBE_RSEC_LSEC_INV_PKT(_n)      0x17274
+#define NGBE_RSEC_LSEC_BADSA_PKT        0x1727C
+#define NGBE_RSEC_LSEC_INVSA_PKT        0x17280
+
+/* ipsec */
+#define NGBE_RSEC_IPS_IDX               0x17100
+#define NGBE_RSEC_IPS_IDX_WT        0x80000000U
+#define NGBE_RSEC_IPS_IDX_RD        0x40000000U
+#define NGBE_RSEC_IPS_IDX_TB_IDX    0x0U /* */
+#define NGBE_RSEC_IPS_IDX_TB_IP     0x00000002U
+#define NGBE_RSEC_IPS_IDX_TB_SPI    0x00000004U
+#define NGBE_RSEC_IPS_IDX_TB_KEY    0x00000006U
+#define NGBE_RSEC_IPS_IDX_EN        0x00000001U
+#define NGBE_RSEC_IPS_IP(i)             (0x17104 + ((i) * 4))
+#define NGBE_RSEC_IPS_SPI               0x17114
+#define NGBE_RSEC_IPS_IP_IDX            0x17118
+#define NGBE_RSEC_IPS_KEY(i)            (0x1711C + ((i) * 4))
+#define NGBE_RSEC_IPS_SALT              0x1712C
+#define NGBE_RSEC_IPS_MODE              0x17130
+#define NGBE_RSEC_IPS_MODE_IPV6         0x00000010
+#define NGBE_RSEC_IPS_MODE_DEC          0x00000008
+#define NGBE_RSEC_IPS_MODE_ESP          0x00000004
+#define NGBE_RSEC_IPS_MODE_AH           0x00000002
+#define NGBE_RSEC_IPS_MODE_VALID        0x00000001
+
+/************************************** ETH PHY ******************************/
+#define NGBE_XPCS_IDA_ADDR    0x13000
+#define NGBE_XPCS_IDA_DATA    0x13004
+#define NGBE_ETHPHY_IDA_ADDR  0x13008
+#define NGBE_ETHPHY_IDA_DATA  0x1300C
+
+/************************************** MNG ********************************/
+#define NGBE_MNG_FW_SM         0x1E000
+#define NGBE_MNG_SW_SM         0x1E004
+#define NGBE_MNG_SWFW_SYNC     0x1E008
+#define NGBE_MNG_MBOX          0x1E100
+#define NGBE_MNG_MBOX_CTL      0x1E044
+
+#define NGBE_MNG_OS2BMC_CNT    0x1E094
+#define NGBE_MNG_BMC2OS_CNT    0x1E090
+
+/* Firmware Semaphore Register */
+#define NGBE_MNG_FW_SM_MODE_MASK       0xE
+#define NGBE_MNG_FW_SM_TS_ENABLED      0x1
+/* SW Semaphore Register bitmasks */
+#define NGBE_MNG_SW_SM_SM              0x00000001U /* software Semaphore */
+
+/* SW_FW_SYNC definitions */
+#define NGBE_MNG_SWFW_SYNC_SW_PHY      0x0001
+#define NGBE_MNG_SWFW_SYNC_SW_FLASH    0x0008
+#define NGBE_MNG_SWFW_SYNC_SW_MB       0x0004
+
+#define NGBE_MNG_MBOX_CTL_SWRDY        0x1
+#define NGBE_MNG_MBOX_CTL_SWACK        0x2
+#define NGBE_MNG_MBOX_CTL_FWRDY        0x4
+#define NGBE_MNG_MBOX_CTL_FWACK        0x8
+
+/************************************* ETH MAC *****************************/
+#define NGBE_MAC_TX_CFG                0x11000
+#define NGBE_MAC_RX_CFG                0x11004
+#define NGBE_MAC_PKT_FLT               0x11008
+#define NGBE_MAC_PKT_FLT_PR            (0x1) /* promiscuous mode */
+#define NGBE_MAC_PKT_FLT_RA            (0x80000000) /* receive all */
+#define NGBE_MAC_WDG_TIMEOUT           0x1100C
+#define NGBE_MAC_TX_FLOW_CTRL          0x11070
+#define NGBE_MAC_RX_FLOW_CTRL          0x11090
+#define NGBE_MAC_INT_ST                0x110B0
+#define NGBE_MAC_INT_EN                0x110B4
+#define NGBE_MAC_ADDRESS0_HIGH         0x11300
+#define NGBE_MAC_ADDRESS0_LOW          0x11304
+
+#define NGBE_MAC_TX_CFG_TE             0x00000001U
+#define NGBE_MAC_TX_CFG_SPEED_MASK     0x60000000U
+#define NGBE_MAC_TX_CFG_SPEED_1G       0x60000000U
+#define NGBE_MAC_RX_CFG_RE             0x00000001U
+#define NGBE_MAC_RX_CFG_JE             0x00000100U
+#define NGBE_MAC_RX_CFG_LM             0x00000400U
+#define NGBE_MAC_WDG_TIMEOUT_PWE       0x00000100U
+#define NGBE_MAC_WDG_TIMEOUT_WTO_MASK  0x0000000FU
+#define NGBE_MAC_WDG_TIMEOUT_WTO_DELTA 2
+
+#define NGBE_MAC_RX_FLOW_CTRL_RFE      0x00000001U /* receive fc enable */
+
+#define NGBE_MSCA                      0x11200
+#define NGBE_MSCA_RA(v)                ((0xFFFF & (v)))
+#define NGBE_MSCA_PA(v)                ((0x1F & (v)) << 16)
+#define NGBE_MSCA_DA(v)                ((0x1F & (v)) << 21)
+#define NGBE_MSCC                      0x11204
+#define NGBE_MSCC_DATA(v)              ((0xFFFF & (v)))
+#define NGBE_MSCC_CMD(v)               ((0x3 & (v)) << 16)
+enum NGBE_MSCA_CMD_value {
+	NGBE_MSCA_CMD_RSV = 0,
+	NGBE_MSCA_CMD_WRITE,
+	NGBE_MSCA_CMD_POST_READ,
+	NGBE_MSCA_CMD_READ,
+};
+#define NGBE_MSCC_SADDR                ((0x1U) << 18)
+#define NGBE_MSCC_CR(v)                ((0x8U & (v)) << 19)
+#define NGBE_MSCC_BUSY                 ((0x1U) << 22)
+#define NGBE_MDIO_CLK(v)               ((0x7 & (v)) << 19)
+
+/* EEE registers */
+
+/* statistic */
+#define NGBE_MAC_LXOFFRXC              0x11988
+#define NGBE_MAC_PXOFFRXC              0x119DC
+#define NGBE_RX_BC_FRAMES_GOOD_LOW     0x11918
+#define NGBE_RX_CRC_ERROR_FRAMES_LOW   0x11928
+#define NGBE_RX_LEN_ERROR_FRAMES_LOW   0x11978
+#define NGBE_RX_UNDERSIZE_FRAMES_GOOD  0x11938
+#define NGBE_RX_OVERSIZE_FRAMES_GOOD   0x1193C
+#define NGBE_RX_FRAME_CNT_GOOD_BAD_LOW 0x11900
+#define NGBE_TX_FRAME_CNT_GOOD_BAD_LOW 0x1181C
+#define NGBE_TX_MC_FRAMES_GOOD_LOW     0x1182C
+#define NGBE_TX_BC_FRAMES_GOOD_LOW     0x11824
+#define NGBE_MMC_CONTROL               0x11800
+#define NGBE_MMC_CONTROL_RSTONRD       0x4 /* reset on read */
+#define NGBE_MMC_CONTROL_UP            0x700
+
+/********************************* BAR registers ***************************/
+/* Interrupt Registers */
+#define NGBE_BME_CTL                           0x12020
+#define NGBE_PX_MISC_IC                        0x100
+#define NGBE_PX_MISC_ICS                       0x104
+#define NGBE_PX_MISC_IEN                       0x108
+#define NGBE_PX_MISC_IVAR                      0x4FC
+#define NGBE_PX_GPIE                           0x118
+#define NGBE_PX_ISB_ADDR_L                     0x160
+#define NGBE_PX_ISB_ADDR_H                     0x164
+#define NGBE_PX_TCP_TIMER                      0x170
+#define NGBE_PX_ITRSEL                         0x180
+#define NGBE_PX_IC                             0x120
+#define NGBE_PX_ICS                            0x130
+#define NGBE_PX_IMS                            0x140
+#define NGBE_PX_IMC                            0x150
+#define NGBE_PX_IVAR(_i)                       (0x500 + (_i) * 4) /* [0,3] */
+#define NGBE_PX_ITR(_i)                        (0x200 + (_i) * 4) /* [0,8] */
+#define NGBE_PX_TRANSACTION_PENDING            0x168
+#define NGBE_PX_INTA                           0x110
+
+/* Interrupt register bitmasks */
+/* Extended Interrupt Cause Read */
+#define NGBE_PX_MISC_IC_DEV_RST        0x00000400U /* device reset event */
+#define NGBE_PX_MISC_IC_TIMESYNC       0x00000800U /* time sync */
+#define NGBE_PX_MISC_IC_STALL          0x00001000U /* trans or recv path is
+													 * stalled */
+#define NGBE_PX_MISC_IC_LINKSEC        0x00002000U /* Tx LinkSec require key
+													 * exchange */
+#define NGBE_PX_MISC_IC_RX_MISS        0x00004000U /* Packet Buffer Overrun */
+#define NGBE_PX_MISC_IC_I2C            0x00010000U /* I2C interrupt */
+#define NGBE_PX_MISC_IC_ETH_EVENT      0x00020000U /* err reported by MAC except
+													 * eth link down */
+#define NGBE_PX_MISC_IC_PHY            0x00040000U /* link up */
+#define NGBE_PX_MISC_IC_INT_ERR        0x00100000U /* integrity error */
+#define NGBE_PX_MISC_IC_SPI            0x00200000U /* SPI interface */
+#define NGBE_PX_MISC_IC_VF_MBOX        0x00800000U /* VF-PF message box */
+#define NGBE_PX_MISC_IC_GPIO           0x04000000U /* GPIO interrupt */
+#define NGBE_PX_MISC_IC_PCIE_REQ_ERR   0x08000000U /* pcie request error int */
+#define NGBE_PX_MISC_IC_OVER_HEAT      0x10000000U /* overheat detection */
+#define NGBE_PX_MISC_IC_PROBE_MATCH    0x20000000U /* probe match */
+#define NGBE_PX_MISC_IC_MNG_HOST_MBOX  0x40000000U /* mng mailbox */
+#define NGBE_PX_MISC_IC_TIMER          0x80000000U /* tcp timer */
+
+/* Extended Interrupt Cause Set */
+#define NGBE_PX_MISC_ICS_ETH_LKDN      0x00000100U
+#define NGBE_PX_MISC_ICS_DEV_RST       0x00000400U
+#define NGBE_PX_MISC_ICS_TIMESYNC      0x00000800U
+#define NGBE_PX_MISC_ICS_STALL         0x00001000U
+#define NGBE_PX_MISC_ICS_LINKSEC       0x00002000U
+#define NGBE_PX_MISC_ICS_RX_MISS       0x00004000U
+#define NGBE_PX_MISC_ICS_FLOW_DIR      0x00008000U
+#define NGBE_PX_MISC_ICS_I2C           0x00010000U
+#define NGBE_PX_MISC_ICS_ETH_EVENT     0x00020000U
+#define NGBE_PX_MISC_ICS_ETH_LK        0x00040000U
+#define NGBE_PX_MISC_ICS_ETH_AN        0x00080000U
+#define NGBE_PX_MISC_ICS_INT_ERR       0x00100000U
+#define NGBE_PX_MISC_ICS_SPI           0x00200000U
+#define NGBE_PX_MISC_ICS_VF_MBOX       0x00800000U
+#define NGBE_PX_MISC_ICS_GPIO          0x04000000U
+#define NGBE_PX_MISC_ICS_PCIE_REQ_ERR  0x08000000U
+#define NGBE_PX_MISC_ICS_OVER_HEAT     0x10000000U
+#define NGBE_PX_MISC_ICS_PROBE_MATCH   0x20000000U
+#define NGBE_PX_MISC_ICS_MNG_HOST_MBOX 0x40000000U
+#define NGBE_PX_MISC_ICS_TIMER         0x80000000U
+
+/* Extended Interrupt Enable Set */
+#define NGBE_PX_MISC_IEN_ETH_LKDN      0x00000100U
+#define NGBE_PX_MISC_IEN_DEV_RST       0x00000400U
+#define NGBE_PX_MISC_IEN_TIMESYNC      0x00000800U
+#define NGBE_PX_MISC_IEN_STALL         0x00001000U
+#define NGBE_PX_MISC_IEN_LINKSEC       0x00002000U
+#define NGBE_PX_MISC_IEN_RX_MISS       0x00004000U
+#define NGBE_PX_MISC_IEN_I2C           0x00010000U
+#define NGBE_PX_MISC_IEN_ETH_EVENT     0x00020000U
+#define NGBE_PX_MISC_IEN_ETH_LK        0x00040000U
+#define NGBE_PX_MISC_IEN_ETH_AN        0x00080000U
+#define NGBE_PX_MISC_IEN_INT_ERR       0x00100000U
+#define NGBE_PX_MISC_IEN_SPI           0x00200000U
+#define NGBE_PX_MISC_IEN_VF_MBOX       0x00800000U
+#define NGBE_PX_MISC_IEN_GPIO          0x04000000U
+#define NGBE_PX_MISC_IEN_PCIE_REQ_ERR  0x08000000U
+#define NGBE_PX_MISC_IEN_OVER_HEAT     0x10000000U
+#define NGBE_PX_MISC_IEN_PROBE_MATCH   0x20000000U
+#define NGBE_PX_MISC_IEN_MNG_HOST_MBOX 0x40000000U
+#define NGBE_PX_MISC_IEN_TIMER         0x80000000U
+
+#define NGBE_PX_MISC_IEN_MASK ( \
+				NGBE_PX_MISC_IEN_ETH_LKDN| \
+				NGBE_PX_MISC_IEN_DEV_RST | \
+				NGBE_PX_MISC_IEN_ETH_EVENT | \
+				NGBE_PX_MISC_IEN_ETH_LK | \
+				NGBE_PX_MISC_IEN_ETH_AN | \
+				NGBE_PX_MISC_IEN_INT_ERR | \
+				NGBE_PX_MISC_IEN_VF_MBOX | \
+				NGBE_PX_MISC_IEN_GPIO | \
+				NGBE_PX_MISC_IEN_MNG_HOST_MBOX | \
+				NGBE_PX_MISC_IEN_STALL | \
+				NGBE_PX_MISC_IEN_PCIE_REQ_ERR | \
+				NGBE_PX_MISC_IEN_TIMER)
+
+/* General purpose Interrupt Enable */
+#define NGBE_PX_GPIE_MODEL             0x00000001U
+#define NGBE_PX_GPIE_IMEN              0x00000002U
+#define NGBE_PX_GPIE_LL_INTERVAL       0x000000F0U
+
+/* Interrupt Vector Allocation Registers */
+#define NGBE_PX_IVAR_REG_NUM              64
+#define NGBE_PX_IVAR_ALLOC_VAL            0x80 /* Interrupt Allocation valid */
+
+#define NGBE_MAX_INT_RATE              500000
+#define NGBE_MIN_INT_RATE              980
+#define NGBE_MAX_EITR                  0x00007FFCU
+#define NGBE_MIN_EITR                  4
+#define NGBE_PX_ITR_ITR_INT_MASK       0x00000FF8U
+#define NGBE_PX_ITR_LLI_CREDIT         0x001f0000U
+#define NGBE_PX_ITR_LLI_MOD            0x00008000U
+#define NGBE_PX_ITR_CNT_WDIS           0x80000000U
+#define NGBE_PX_ITR_ITR_CNT            0x0FE00000U
+
+/* transmit DMA Registers */
+#define NGBE_PX_TR_BAL(_i)     (0x03000 + ((_i) * 0x40)) /* [0, 7] */
+#define NGBE_PX_TR_BAH(_i)     (0x03004 + ((_i) * 0x40))
+#define NGBE_PX_TR_WP(_i)      (0x03008 + ((_i) * 0x40))
+#define NGBE_PX_TR_RP(_i)      (0x0300C + ((_i) * 0x40))
+#define NGBE_PX_TR_CFG(_i)     (0x03010 + ((_i) * 0x40))
+/* Transmit Config masks */
+#define NGBE_PX_TR_CFG_ENABLE          (1) /* Ena specific Tx Queue */
+#define NGBE_PX_TR_CFG_TR_SIZE_SHIFT   1 /* tx desc number per ring */
+#define NGBE_PX_TR_CFG_SWFLSH          (1 << 26) /* Tx Desc. wr-bk flushing */
+#define NGBE_PX_TR_CFG_WTHRESH_SHIFT   16 /* shift to WTHRESH bits */
+#define NGBE_PX_TR_CFG_THRE_SHIFT      8
+
+#define NGBE_PX_TR_RPn(q_per_pool, vf_number, vf_q_index) \
+		(NGBE_PX_TR_RP((q_per_pool)*(vf_number) + (vf_q_index)))
+
+#define NGBE_PX_TR_WPn(q_per_pool, vf_number, vf_q_index) \
+		(NGBE_PX_TR_WP((q_per_pool)*(vf_number) + (vf_q_index)))
+
+/* Receive DMA Registers */
+#define NGBE_PX_RR_BAL(_i)             (0x01000 + ((_i) * 0x40)) /* [0, 7] */
+#define NGBE_PX_RR_BAH(_i)             (0x01004 + ((_i) * 0x40))
+#define NGBE_PX_RR_WP(_i)              (0x01008 + ((_i) * 0x40))
+#define NGBE_PX_RR_RP(_i)              (0x0100C + ((_i) * 0x40))
+#define NGBE_PX_RR_CFG(_i)             (0x01010 + ((_i) * 0x40))
+/* PX_RR_CFG bit definitions */
+#define NGBE_PX_RR_CFG_RR_SIZE_SHIFT           1
+#define NGBE_PX_RR_CFG_BSIZEPKT_SHIFT          2 /* so many KBs */
+#define NGBE_PX_RR_CFG_BSIZEHDRSIZE_SHIFT      6 /* 64byte resolution (>> 6)
+						* + at bit 8 offset (<< 12)
+						*  = (<< 6)
+						*/
+#define NGBE_PX_RR_CFG_DROP_EN         0x40000000U
+#define NGBE_PX_RR_CFG_VLAN            0x80000000U
+#define NGBE_PX_RR_CFG_RSC             0x20000000U
+#define NGBE_PX_RR_CFG_CNTAG           0x10000000U
+#define NGBE_PX_RR_CFG_RSC_CNT_MD      0x08000000U
+#define NGBE_PX_RR_CFG_SPLIT_MODE      0x04000000U
+#define NGBE_PX_RR_CFG_STALL           0x02000000U
+#define NGBE_PX_RR_CFG_MAX_RSCBUF_1    0x00000000U
+#define NGBE_PX_RR_CFG_MAX_RSCBUF_4    0x00800000U
+#define NGBE_PX_RR_CFG_MAX_RSCBUF_8    0x01000000U
+#define NGBE_PX_RR_CFG_MAX_RSCBUF_16   0x01800000U
+#define NGBE_PX_RR_CFG_RR_THER         0x00070000U
+#define NGBE_PX_RR_CFG_RR_THER_SHIFT   16
+
+#define NGBE_PX_RR_CFG_RR_HDR_SZ       0x0000F000U
+#define NGBE_PX_RR_CFG_RR_BUF_SZ       0x00000F00U
+#define NGBE_PX_RR_CFG_RR_SZ           0x0000007EU
+#define NGBE_PX_RR_CFG_RR_EN           0x00000001U
+
+/* statistic */
+#define NGBE_PX_MPRC(_i)               (0x1020 + ((_i) * 64)) /* [0,7] */
+#define NGBE_PX_BPRC(_i)               (0x1024 + ((_i) * 64))
+
+
+#define NGBE_PX_MPTC(_i)               (0x3020 + ((_i) * 64)) /* [0,7] */
+#define NGBE_PX_BPTC(_i)               (0x3024 + ((_i) * 64))
+
+#define NGBE_VX_GPRC                   0x01014
+#define NGBE_VX_GORC_LSB               0x01018
+#define NGBE_VX_GORC_MSB               0x0101C
+#define NGBE_VX_MPRC                   0x01020
+#define NGBE_VX_BPRC                   0x01024
+
+#define NGBE_VX_GPTC                   0x03014
+#define NGBE_VX_GOTC_LSB               0x03018
+#define NGBE_VX_GOTC_MSB               0x0301C
+#define NGBE_VX_MPTC                   0x03020
+#define NGBE_VX_BPTC                   0x03024
+
+#define NGBE_PX_GPRC                   0x12504
+
+#define NGBE_PX_GPTC                   0x18308
+
+#define NGBE_PX_GORC_LSB               0x12508
+#define NGBE_PX_GORC_MSB               0x1250C
+
+#define NGBE_PX_GOTC_LSB               0x1830C
+#define NGBE_PX_GOTC_MSB               0x18310
+
+/*************************** Flash region definition *************************/
+/* EEC Register */
+#define NGBE_EEC_SK            0x00000001U /* EEPROM Clock */
+#define NGBE_EEC_CS            0x00000002U /* EEPROM Chip Select */
+#define NGBE_EEC_DI            0x00000004U /* EEPROM Data In */
+#define NGBE_EEC_DO            0x00000008U /* EEPROM Data Out */
+#define NGBE_EEC_FWE_MASK      0x00000030U /* FLASH Write Enable */
+#define NGBE_EEC_FWE_DIS       0x00000010U /* Disable FLASH writes */
+#define NGBE_EEC_FWE_EN        0x00000020U /* Enable FLASH writes */
+#define NGBE_EEC_FWE_SHIFT     4
+#define NGBE_EEC_REQ           0x00000040U /* EEPROM Access Request */
+#define NGBE_EEC_GNT           0x00000080U /* EEPROM Access Grant */
+#define NGBE_EEC_PRES          0x00000100U /* EEPROM Present */
+#define NGBE_EEC_ARD           0x00000200U /* EEPROM Auto Read Done */
+#define NGBE_EEC_FLUP          0x00800000U /* Flash update command */
+#define NGBE_EEC_SEC1VAL       0x02000000U /* Sector 1 Valid */
+#define NGBE_EEC_FLUDONE       0x04000000U /* Flash update done */
+/* EEPROM Addressing bits based on type (0-small, 1-large) */
+#define NGBE_EEC_ADDR_SIZE     0x00000400U
+#define NGBE_EEC_SIZE          0x00007800U /* EEPROM Size */
+#define NGBE_EERD_MAX_ADDR     0x00003FFFU /* EERD alows 14 bits for addr. */
+
+#define NGBE_EEC_SIZE_SHIFT            11
+#define NGBE_EEPROM_WORD_SIZE_SHIFT    6
+#define NGBE_EEPROM_OPCODE_BITS        8
+
+/* FLA Register */
+#define NGBE_FLA_LOCKED        0x00000040U
+
+/* Part Number String Length */
+#define NGBE_PBANUM_LENGTH     32
+
+/* Checksum and EEPROM pointers */
+#define NGBE_PBANUM_PTR_GUARD          0xFAFA
+#define NGBE_CHECKSUM_CAP_ST_PASS      0x80658383
+#define NGBE_CHECKSUM_CAP_ST_FAIL      0x70657376
+#define NGBE_EEPROM_CHECKSUM           0x2F
+#define NGBE_EEPROM_SUM                0xBABA
+#define NGBE_OPTION_ROM_PTR            0x05
+#define NGBE_SHADOW_RAM_SIZE           0x4000
+#define NGBE_PCIE_CONFIG_SIZE          0x08
+#define NGBE_EEPROM_LAST_WORD          0x800
+#define NGBE_FW_PTR                    0x0F
+#define NGBE_SW_REGION_PTR             0x28
+
+#define NGBE_CALSUM_COMMAND            0xE9
+#define NGBE_CALSUM_CAP_STATUS         0x10224
+#define NGBE_EEPROM_VERSION_STORE_REG  0x1022C
+#define NGBE_SAN_MAC_ADDR_PTR          0x18
+#define NGBE_DEVICE_CAPS               0x1C
+#define NGBE_EEPROM_VERSION_L          0x1D
+#define NGBE_EEPROM_VERSION_H          0x1E
+
+#define NGBE_MAX_MSIX_VECTORS_EMERALD  0x09
+
+/* MSI-X capability fields masks */
+#define NGBE_PCIE_MSIX_TBL_SZ_MASK     0x7FF
+
+/* EEPROM Commands - SPI */
+#define NGBE_EEPROM_MAX_RETRY_SPI      5000 /* Max wait 5ms for RDY signal */
+#define NGBE_EEPROM_STATUS_RDY_SPI     0x01
+#define NGBE_EEPROM_READ_OPCODE_SPI    0x03  /* EEPROM read opcode */
+#define NGBE_EEPROM_WRITE_OPCODE_SPI   0x02  /* EEPROM write opcode */
+#define NGBE_EEPROM_A8_OPCODE_SPI      0x08  /* opcode bit-3 = addr bit-8 */
+#define NGBE_EEPROM_WREN_OPCODE_SPI    0x06  /* EEPROM set Write Ena latch */
+/* EEPROM reset Write Enable latch */
+#define NGBE_EEPROM_WRDI_OPCODE_SPI        0x04
+#define NGBE_EEPROM_RDSR_OPCODE_SPI        0x05  /* EEPROM read Status reg */
+#define NGBE_EEPROM_WRSR_OPCODE_SPI        0x01  /* EEPROM write Status reg */
+#define NGBE_EEPROM_ERASE4K_OPCODE_SPI     0x20  /* EEPROM ERASE 4KB */
+#define NGBE_EEPROM_ERASE64K_OPCODE_SPI    0xD8  /* EEPROM ERASE 64KB */
+#define NGBE_EEPROM_ERASE256_OPCODE_SPI    0xDB  /* EEPROM ERASE 256B */
+
+/* EEPROM Read Register */
+#define NGBE_EEPROM_RW_REG_DATA        16 /* data offset in EEPROM read reg */
+#define NGBE_EEPROM_RW_REG_DONE        2 /* Offset to READ done bit */
+#define NGBE_EEPROM_RW_REG_START       1 /* First bit to start operation */
+#define NGBE_EEPROM_RW_ADDR_SHIFT      2 /* Shift to the address bits */
+#define NGBE_NVM_POLL_WRITE            1 /* Flag for polling for wr complete */
+#define NGBE_NVM_POLL_READ             0 /* Flag for polling for rd complete */
+
+#define NVM_INIT_CTRL_3                 0x38
+#define NVM_INIT_CTRL_3_LPLU            0x8
+
+#define NGBE_ETH_LENGTH_OF_ADDRESS     6
+
+#define NGBE_EEPROM_PAGE_SIZE_MAX      128
+#define NGBE_EEPROM_RD_BUFFER_MAX_COUNT        256 /* words rd in burst */
+#define NGBE_EEPROM_WR_BUFFER_MAX_COUNT        256 /* words wr in burst */
+#define NGBE_EEPROM_CTRL_2             1 /* EEPROM CTRL word 2 */
+#define NGBE_EEPROM_CCD_BIT            2
+
+#ifndef NGBE_EEPROM_GRANT_ATTEMPTS
+#define NGBE_EEPROM_GRANT_ATTEMPTS     1000 /* EEPROM attempts to gain grant */
+#endif
+
+#ifndef NGBE_EERD_EEWR_ATTEMPTS
+/* Number of 5 microseconds we wait for EERD read and
+ * EERW write to complete */
+#define NGBE_EERD_EEWR_ATTEMPTS        100000
+#endif
+
+#ifndef NGBE_FLUDONE_ATTEMPTS
+/* # attempts we wait for flush update to complete */
+#define NGBE_FLUDONE_ATTEMPTS          20000
+#endif
+
+#define NGBE_PCIE_CTRL2                0x5   /* PCIe Control 2 Offset */
+#define NGBE_PCIE_CTRL2_DUMMY_ENABLE   0x8   /* Dummy Function Enable */
+#define NGBE_PCIE_CTRL2_LAN_DISABLE    0x2   /* LAN PCI Disable */
+#define NGBE_PCIE_CTRL2_DISABLE_SELECT 0x1   /* LAN Disable Select */
+
+#define NGBE_SAN_MAC_ADDR_PORT0_OFFSET         0x0
+#define NGBE_SAN_MAC_ADDR_PORT1_OFFSET         0x3
+#define NGBE_DEVICE_CAPS_ALLOW_ANY_SFP         0x1
+#define NGBE_DEVICE_CAPS_FCOE_OFFLOADS         0x2
+#define NGBE_FW_LESM_PARAMETERS_PTR            0x2
+#define NGBE_FW_LESM_STATE_1                   0x1
+#define NGBE_FW_LESM_STATE_ENABLED             0x8000 /* LESM Enable bit */
+#define NGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR   0x4
+#define NGBE_FW_PATCH_VERSION_4                0x7
+#define NGBE_FCOE_IBA_CAPS_BLK_PTR             0x33 /* iSCSI/FCOE block */
+#define NGBE_FCOE_IBA_CAPS_FCOE                0x20 /* FCOE flags */
+#define NGBE_ISCSI_FCOE_BLK_PTR                0x17 /* iSCSI/FCOE block */
+#define NGBE_ISCSI_FCOE_FLAGS_OFFSET           0x0 /* FCOE flags */
+#define NGBE_ISCSI_FCOE_FLAGS_ENABLE           0x1 /* FCOE flags enable bit */
+#define NGBE_ALT_SAN_MAC_ADDR_BLK_PTR          0x17 /* Alt. SAN MAC block */
+#define NGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET      0x0 /* Alt SAN MAC capability */
+#define NGBE_ALT_SAN_MAC_ADDR_PORT0_OFFSET     0x1 /* Alt SAN MAC 0 offset */
+#define NGBE_ALT_SAN_MAC_ADDR_PORT1_OFFSET     0x4 /* Alt SAN MAC 1 offset */
+#define NGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET      0x7 /* Alt WWNN prefix offset */
+#define NGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET      0x8 /* Alt WWPN prefix offset */
+#define NGBE_ALT_SAN_MAC_ADDR_CAPS_SANMAC      0x0 /* Alt SAN MAC exists */
+#define NGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN      0x1 /* Alt WWN base exists */
+#define NGBE_DEVICE_CAPS_WOL_PORT0_1   0x4 /* WoL supported on ports 0 & 1 */
+#define NGBE_DEVICE_CAPS_WOL_PORT0     0x8 /* WoL supported on port 0 */
+#define NGBE_DEVICE_CAPS_WOL_MASK      0xC /* Mask for WoL capabilities */
+
+/******************************** PCI Bus Info *******************************/
+#define NGBE_PCI_DEVICE_STATUS         0xAA
+#define NGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING     0x0020
+#define NGBE_PCI_LINK_STATUS           0xB2
+#define NGBE_PCI_DEVICE_CONTROL2       0xC8
+#define NGBE_PCI_LINK_WIDTH            0x3F0
+#define NGBE_PCI_LINK_WIDTH_1          0x10
+#define NGBE_PCI_LINK_WIDTH_2          0x20
+#define NGBE_PCI_LINK_WIDTH_4          0x40
+#define NGBE_PCI_LINK_WIDTH_8          0x80
+#define NGBE_PCI_LINK_SPEED            0xF
+#define NGBE_PCI_LINK_SPEED_2500       0x1
+#define NGBE_PCI_LINK_SPEED_5000       0x2
+#define NGBE_PCI_LINK_SPEED_8000       0x3
+#define NGBE_PCI_HEADER_TYPE_REGISTER  0x0E
+#define NGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80
+#define NGBE_PCI_DEVICE_CONTROL2_16ms  0x0005
+
+#define NGBE_PCIDEVCTRL2_RELAX_ORDER_OFFSET    4
+#define NGBE_PCIDEVCTRL2_RELAX_ORDER_MASK      \
+				(0x0001 << NGBE_PCIDEVCTRL2_RELAX_ORDER_OFFSET)
+#define NGBE_PCIDEVCTRL2_RELAX_ORDER_ENABLE    \
+				(0x01 << NGBE_PCIDEVCTRL2_RELAX_ORDER_OFFSET)
+
+#define NGBE_PCIDEVCTRL2_TIMEO_MASK    0xf
+#define NGBE_PCIDEVCTRL2_16_32ms_def   0x0
+#define NGBE_PCIDEVCTRL2_50_100us      0x1
+#define NGBE_PCIDEVCTRL2_1_2ms         0x2
+#define NGBE_PCIDEVCTRL2_16_32ms       0x5
+#define NGBE_PCIDEVCTRL2_65_130ms      0x6
+#define NGBE_PCIDEVCTRL2_260_520ms     0x9
+#define NGBE_PCIDEVCTRL2_1_2s          0xa
+#define NGBE_PCIDEVCTRL2_4_8s          0xd
+#define NGBE_PCIDEVCTRL2_17_34s        0xe
+
+/******************* Receive Descriptor bit definitions **********************/
+#define NGBE_RXD_IPSEC_STATUS_SECP             0x00020000U
+#define NGBE_RXD_IPSEC_ERROR_INVALID_PROTOCOL  0x08000000U
+#define NGBE_RXD_IPSEC_ERROR_INVALID_LENGTH    0x10000000U
+#define NGBE_RXD_IPSEC_ERROR_AUTH_FAILED       0x18000000U
+#define NGBE_RXD_IPSEC_ERROR_BIT_MASK          0x18000000U
+
+#define NGBE_RXD_NEXTP_MASK            0x000FFFF0U /* Next Descriptor Index */
+#define NGBE_RXD_NEXTP_SHIFT           0x00000004U
+#define NGBE_RXD_STAT_MASK             0x000fffffU /* Stat/NEXTP: bit 0-19 */
+#define NGBE_RXD_STAT_DD               0x00000001U /* Done */
+#define NGBE_RXD_STAT_EOP              0x00000002U /* End of Packet */
+#define NGBE_RXD_STAT_CLASS_ID_MASK    0x0000001CU
+#define NGBE_RXD_STAT_CLASS_ID_TC_RSS  0x00000000U
+#define NGBE_RXD_STAT_CLASS_ID_SYN     0x00000008U
+#define NGBE_RXD_STAT_CLASS_ID_5_TUPLE 0x0000000CU
+#define NGBE_RXD_STAT_CLASS_ID_L2_ETYPE 0x00000010U
+#define NGBE_RXD_STAT_VP               0x00000020U /* IEEE VLAN Pkt */
+#define NGBE_RXD_STAT_UDPCS            0x00000040U /* UDP xsum calculated */
+#define NGBE_RXD_STAT_L4CS             0x00000080U /* L4 xsum calculated */
+#define NGBE_RXD_STAT_IPCS             0x00000100U /* IP xsum calculated */
+#define NGBE_RXD_STAT_PIF              0x00000200U /* passed in-exact filter */
+#define NGBE_RXD_STAT_OUTERIPCS        0x00000400U /* Cloud IP xsum calculated*/
+#define NGBE_RXD_STAT_VEXT             0x00000800U /* 1st VLAN found */
+#define NGBE_RXD_STAT_LLINT            0x00002000U /* Pkt caused Low Latency
+													 * Int */
+#define NGBE_RXD_STAT_TS               0x00004000U /* IEEE1588 Time Stamp */
+#define NGBE_RXD_STAT_SECP             0x00008000U /* Security Processing */
+#define NGBE_RXD_STAT_LB               0x00010000U /* Loopback Status */
+#define NGBE_RXD_STAT_FCEOFS           0x00020000U /* FCoE EOF/SOF Stat */
+#define NGBE_RXD_STAT_FCSTAT           0x000C0000U /* FCoE Pkt Stat */
+#define NGBE_RXD_STAT_FCSTAT_NOMTCH    0x00000000U /* 00: No Ctxt Match */
+#define NGBE_RXD_STAT_FCSTAT_NODDP     0x00040000U /* 01: Ctxt w/o DDP */
+#define NGBE_RXD_STAT_FCSTAT_FCPRSP    0x00080000U /* 10: Recv. FCP_RSP */
+#define NGBE_RXD_STAT_FCSTAT_DDP       0x000C0000U /* 11: Ctxt w/ DDP */
+
+#define NGBE_RXD_ERR_MASK              0xfff00000U /* RDESC.ERRORS mask */
+#define NGBE_RXD_ERR_SHIFT             20         /* RDESC.ERRORS shift */
+#define NGBE_RXD_ERR_FCEOFE            0x80000000U /* FCEOFe/IPE */
+#define NGBE_RXD_ERR_HBO               0x00800000U /*Header Buffer Overflow */
+#define NGBE_RXD_ERR_OUTERIPER         0x04000000U /* CRC IP Header error */
+#define NGBE_RXD_ERR_SECERR_MASK       0x18000000U
+#define NGBE_RXD_ERR_RXE               0x20000000U /* Any MAC Error */
+#define NGBE_RXD_ERR_TCPE              0x40000000U /* TCP/UDP Checksum Error */
+#define NGBE_RXD_ERR_IPE               0x80000000U /* IP Checksum Error */
+
+#define NGBE_RXDPS_HDRSTAT_HDRSP       0x00008000U
+#define NGBE_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FFU
+
+#define NGBE_RXD_RSSTYPE_MASK          0x0000000FU
+#define NGBE_RXD_TPID_MASK             0x000001C0U
+#define NGBE_RXD_TPID_SHIFT            6
+#define NGBE_RXD_HDRBUFLEN_MASK        0x00007FE0U
+#define NGBE_RXD_RSCCNT_MASK           0x001E0000U
+#define NGBE_RXD_RSCCNT_SHIFT          17
+#define NGBE_RXD_HDRBUFLEN_SHIFT       5
+#define NGBE_RXD_SPLITHEADER_EN        0x00001000U
+#define NGBE_RXD_SPH                   0x8000
+
+/* RSS Hash results */
+#define NGBE_RXD_RSSTYPE_NONE          0x00000000U
+#define NGBE_RXD_RSSTYPE_IPV4_TCP      0x00000001U
+#define NGBE_RXD_RSSTYPE_IPV4          0x00000002U
+#define NGBE_RXD_RSSTYPE_IPV6_TCP      0x00000003U
+#define NGBE_RXD_RSSTYPE_IPV4_SCTP     0x00000004U
+#define NGBE_RXD_RSSTYPE_IPV6          0x00000005U
+#define NGBE_RXD_RSSTYPE_IPV6_SCTP     0x00000006U
+#define NGBE_RXD_RSSTYPE_IPV4_UDP      0x00000007U
+#define NGBE_RXD_RSSTYPE_IPV6_UDP      0x00000008U
+
+/**
+ * receive packet type
+ * PTYPE:8 = TUN:2 + PKT:2 + TYP:4
+ **/
+/* TUN */
+#define NGBE_PTYPE_TUN_IPV4            (0x80)
+#define NGBE_PTYPE_TUN_IPV6            (0xC0)
+
+/* PKT for TUN */
+#define NGBE_PTYPE_PKT_IPIP            (0x00) /* IP+IP */
+#define NGBE_PTYPE_PKT_IG              (0x10) /* IP+GRE */
+#define NGBE_PTYPE_PKT_IGM             (0x20) /* IP+GRE+MAC */
+#define NGBE_PTYPE_PKT_IGMV            (0x30) /* IP+GRE+MAC+VLAN */
+/* PKT for !TUN */
+#define NGBE_PTYPE_PKT_MAC             (0x10)
+#define NGBE_PTYPE_PKT_IP              (0x20)
+#define NGBE_PTYPE_PKT_FCOE            (0x30)
+
+/* TYP for PKT=mac */
+#define NGBE_PTYPE_TYP_MAC             (0x01)
+#define NGBE_PTYPE_TYP_TS              (0x02) /* time sync */
+#define NGBE_PTYPE_TYP_FIP             (0x03)
+#define NGBE_PTYPE_TYP_LLDP            (0x04)
+#define NGBE_PTYPE_TYP_CNM             (0x05)
+#define NGBE_PTYPE_TYP_EAPOL           (0x06)
+#define NGBE_PTYPE_TYP_ARP             (0x07)
+/* TYP for PKT=ip */
+#define NGBE_PTYPE_PKT_IPV6            (0x08)
+#define NGBE_PTYPE_TYP_IPFRAG          (0x01)
+#define NGBE_PTYPE_TYP_IP              (0x02)
+#define NGBE_PTYPE_TYP_UDP             (0x03)
+#define NGBE_PTYPE_TYP_TCP             (0x04)
+#define NGBE_PTYPE_TYP_SCTP            (0x05)
+/* TYP for PKT=fcoe */
+#define NGBE_PTYPE_PKT_VFT             (0x08)
+#define NGBE_PTYPE_TYP_FCOE            (0x00)
+#define NGBE_PTYPE_TYP_FCDATA          (0x01)
+#define NGBE_PTYPE_TYP_FCRDY           (0x02)
+#define NGBE_PTYPE_TYP_FCRSP           (0x03)
+#define NGBE_PTYPE_TYP_FCOTHER         (0x04)
+
+/* Packet type non-ip values */
+enum ngbe_l2_ptypes {
+	NGBE_PTYPE_L2_ABORTED = (NGBE_PTYPE_PKT_MAC),
+	NGBE_PTYPE_L2_MAC = (NGBE_PTYPE_PKT_MAC | NGBE_PTYPE_TYP_MAC),
+	NGBE_PTYPE_L2_TS = (NGBE_PTYPE_PKT_MAC | NGBE_PTYPE_TYP_TS),
+	NGBE_PTYPE_L2_FIP = (NGBE_PTYPE_PKT_MAC | NGBE_PTYPE_TYP_FIP),
+	NGBE_PTYPE_L2_LLDP = (NGBE_PTYPE_PKT_MAC | NGBE_PTYPE_TYP_LLDP),
+	NGBE_PTYPE_L2_CNM = (NGBE_PTYPE_PKT_MAC | NGBE_PTYPE_TYP_CNM),
+	NGBE_PTYPE_L2_EAPOL = (NGBE_PTYPE_PKT_MAC | NGBE_PTYPE_TYP_EAPOL),
+	NGBE_PTYPE_L2_ARP = (NGBE_PTYPE_PKT_MAC | NGBE_PTYPE_TYP_ARP),
+
+	NGBE_PTYPE_L2_IPV4_FRAG = (NGBE_PTYPE_PKT_IP |
+				    NGBE_PTYPE_TYP_IPFRAG),
+	NGBE_PTYPE_L2_IPV4 = (NGBE_PTYPE_PKT_IP | NGBE_PTYPE_TYP_IP),
+	NGBE_PTYPE_L2_IPV4_UDP = (NGBE_PTYPE_PKT_IP | NGBE_PTYPE_TYP_UDP),
+	NGBE_PTYPE_L2_IPV4_TCP = (NGBE_PTYPE_PKT_IP | NGBE_PTYPE_TYP_TCP),
+	NGBE_PTYPE_L2_IPV4_SCTP = (NGBE_PTYPE_PKT_IP | NGBE_PTYPE_TYP_SCTP),
+	NGBE_PTYPE_L2_IPV6_FRAG = (NGBE_PTYPE_PKT_IP | NGBE_PTYPE_PKT_IPV6 |
+				    NGBE_PTYPE_TYP_IPFRAG),
+	NGBE_PTYPE_L2_IPV6 = (NGBE_PTYPE_PKT_IP | NGBE_PTYPE_PKT_IPV6 |
+			       NGBE_PTYPE_TYP_IP),
+	NGBE_PTYPE_L2_IPV6_UDP = (NGBE_PTYPE_PKT_IP | NGBE_PTYPE_PKT_IPV6 |
+				   NGBE_PTYPE_TYP_UDP),
+	NGBE_PTYPE_L2_IPV6_TCP = (NGBE_PTYPE_PKT_IP | NGBE_PTYPE_PKT_IPV6 |
+				   NGBE_PTYPE_TYP_TCP),
+	NGBE_PTYPE_L2_IPV6_SCTP = (NGBE_PTYPE_PKT_IP | NGBE_PTYPE_PKT_IPV6 |
+				    NGBE_PTYPE_TYP_SCTP),
+
+	NGBE_PTYPE_L2_FCOE = (NGBE_PTYPE_PKT_FCOE | NGBE_PTYPE_TYP_FCOE),
+	NGBE_PTYPE_L2_FCOE_FCDATA = (NGBE_PTYPE_PKT_FCOE |
+				      NGBE_PTYPE_TYP_FCDATA),
+	NGBE_PTYPE_L2_FCOE_FCRDY = (NGBE_PTYPE_PKT_FCOE |
+				     NGBE_PTYPE_TYP_FCRDY),
+	NGBE_PTYPE_L2_FCOE_FCRSP = (NGBE_PTYPE_PKT_FCOE |
+				     NGBE_PTYPE_TYP_FCRSP),
+	NGBE_PTYPE_L2_FCOE_FCOTHER = (NGBE_PTYPE_PKT_FCOE |
+				       NGBE_PTYPE_TYP_FCOTHER),
+	NGBE_PTYPE_L2_FCOE_VFT = (NGBE_PTYPE_PKT_FCOE | NGBE_PTYPE_PKT_VFT),
+	NGBE_PTYPE_L2_FCOE_VFT_FCDATA = (NGBE_PTYPE_PKT_FCOE |
+				NGBE_PTYPE_PKT_VFT | NGBE_PTYPE_TYP_FCDATA),
+	NGBE_PTYPE_L2_FCOE_VFT_FCRDY = (NGBE_PTYPE_PKT_FCOE |
+				NGBE_PTYPE_PKT_VFT | NGBE_PTYPE_TYP_FCRDY),
+	NGBE_PTYPE_L2_FCOE_VFT_FCRSP = (NGBE_PTYPE_PKT_FCOE |
+				NGBE_PTYPE_PKT_VFT | NGBE_PTYPE_TYP_FCRSP),
+	NGBE_PTYPE_L2_FCOE_VFT_FCOTHER = (NGBE_PTYPE_PKT_FCOE |
+				NGBE_PTYPE_PKT_VFT | NGBE_PTYPE_TYP_FCOTHER),
+
+	NGBE_PTYPE_L2_TUN4_MAC = (NGBE_PTYPE_TUN_IPV4 | NGBE_PTYPE_PKT_IGM),
+	NGBE_PTYPE_L2_TUN6_MAC = (NGBE_PTYPE_TUN_IPV6 | NGBE_PTYPE_PKT_IGM),
+};
+
+#define NGBE_RXD_PKTTYPE(_rxd) \
+	((le32_to_cpu((_rxd)->wb.lower.lo_dword.data) >> 9) & 0xFF)
+#define NGBE_PTYPE_TUN(_pt) ((_pt) & 0xC0)
+#define NGBE_PTYPE_PKT(_pt) ((_pt) & 0x30)
+#define NGBE_PTYPE_TYP(_pt) ((_pt) & 0x0F)
+#define NGBE_PTYPE_TYPL4(_pt) ((_pt) & 0x07)
+
+#define NGBE_RXD_IPV6EX(_rxd) \
+	((le32_to_cpu((_rxd)->wb.lower.lo_dword.data) >> 6) & 0x1)
+
+/* Security Processing bit Indication */
+#define NGBE_RXD_LNKSEC_STATUS_SECP            0x00020000U
+#define NGBE_RXD_LNKSEC_ERROR_NO_SA_MATCH      0x08000000U
+#define NGBE_RXD_LNKSEC_ERROR_REPLAY_ERROR     0x10000000U
+#define NGBE_RXD_LNKSEC_ERROR_BIT_MASK         0x18000000U
+#define NGBE_RXD_LNKSEC_ERROR_BAD_SIG          0x18000000U
+
+/* Masks to determine if packets should be dropped due to frame errors */
+#define NGBE_RXD_ERR_FRAME_ERR_MASK    NGBE_RXD_ERR_RXE
+
+/*********************** Adv Transmit Descriptor Config Masks ****************/
+#define NGBE_TXD_DTALEN_MASK           0x0000FFFFU /* Data buf length(bytes) */
+#define NGBE_TXD_MAC_LINKSEC           0x00040000U /* Insert LinkSec */
+#define NGBE_TXD_MAC_TSTAMP            0x00080000U /* IEEE1588 time stamp */
+#define NGBE_TXD_IPSEC_SA_INDEX_MASK   0x000003FFU /* IPSec SA index */
+#define NGBE_TXD_IPSEC_ESP_LEN_MASK    0x000001FFU /* IPSec ESP length */
+#define NGBE_TXD_DTYP_MASK             0x00F00000U /* DTYP mask */
+#define NGBE_TXD_DTYP_CTXT             0x00100000U /* Adv Context Desc */
+#define NGBE_TXD_DTYP_DATA             0x00000000U /* Adv Data Descriptor */
+#define NGBE_TXD_EOP                   0x01000000U  /* End of Packet */
+#define NGBE_TXD_IFCS                  0x02000000U /* Insert FCS */
+#define NGBE_TXD_LINKSEC               0x04000000U /* enable linksec */
+#define NGBE_TXD_RS                    0x08000000U /* Report Status */
+#define NGBE_TXD_ECU                   0x10000000U /* DDP hdr type or iSCSI */
+#define NGBE_TXD_QCN                   0x20000000U /* cntag insertion enable */
+#define NGBE_TXD_VLE                   0x40000000U /* VLAN pkt enable */
+#define NGBE_TXD_TSE                   0x80000000U /* TCP Seg enable */
+#define NGBE_TXD_STAT_DD               0x00000001U /* Descriptor Done */
+#define NGBE_TXD_IDX_SHIFT             4 /* Adv desc Index shift */
+#define NGBE_TXD_CC                    0x00000080U /* Check Context */
+#define NGBE_TXD_IPSEC                 0x00000100U /* enable ipsec esp */
+#define NGBE_TXD_IIPCS                 0x00000400U
+#define NGBE_TXD_EIPCS                 0x00000800U
+#define NGBE_TXD_L4CS                  0x00000200U
+#define NGBE_TXD_PAYLEN_SHIFT          13 /* Adv desc PAYLEN shift */
+#define NGBE_TXD_MACLEN_SHIFT          9  /* Adv ctxt desc mac len shift */
+#define NGBE_TXD_VLAN_SHIFT            16  /* Adv ctxt vlan tag shift */
+#define NGBE_TXD_TAG_TPID_SEL_SHIFT    11
+#define NGBE_TXD_IPSEC_TYPE_SHIFT      14
+#define NGBE_TXD_ENC_SHIFT             15
+
+#define NGBE_TXD_TUCMD_IPSEC_TYPE_ESP  0x00004000U /* IPSec Type ESP */
+#define NGBE_TXD_TUCMD_IPSEC_ENCRYPT_EN 0x00008000/* ESP Encrypt Enable */
+#define NGBE_TXD_TUCMD_FCOE            0x00010000U /* FCoE Frame Type */
+#define NGBE_TXD_FCOEF_EOF_MASK        (0x3 << 10) /* FC EOF index */
+#define NGBE_TXD_FCOEF_SOF             ((1 << 2) << 10) /* FC SOF index */
+#define NGBE_TXD_FCOEF_PARINC          ((1 << 3) << 10) /* Rel_Off in F_CTL */
+#define NGBE_TXD_FCOEF_ORIE            ((1 << 4) << 10) /* Orientation End */
+#define NGBE_TXD_FCOEF_ORIS            ((1 << 5) << 10) /* Orientation Start */
+#define NGBE_TXD_FCOEF_EOF_N           (0x0 << 10) /* 00: EOFn */
+#define NGBE_TXD_FCOEF_EOF_T           (0x1 << 10) /* 01: EOFt */
+#define NGBE_TXD_FCOEF_EOF_NI          (0x2 << 10) /* 10: EOFni */
+#define NGBE_TXD_FCOEF_EOF_A           (0x3 << 10) /* 11: EOFa */
+#define NGBE_TXD_L4LEN_SHIFT           8  /* Adv ctxt L4LEN shift */
+#define NGBE_TXD_MSS_SHIFT             16  /* Adv ctxt MSS shift */
+
+#define NGBE_TXD_OUTER_IPLEN_SHIFT     12 /* Adv ctxt OUTERIPLEN shift */
+#define NGBE_TXD_TUNNEL_LEN_SHIFT      21 /* Adv ctxt TUNNELLEN shift */
+#define NGBE_TXD_TUNNEL_TYPE_SHIFT     11 /* Adv Tx Desc Tunnel Type shift */
+#define NGBE_TXD_TUNNEL_DECTTL_SHIFT   27 /* Adv ctxt DECTTL shift */
+#define NGBE_TXD_TUNNEL_UDP            (0x0ULL << NGBE_TXD_TUNNEL_TYPE_SHIFT)
+#define NGBE_TXD_TUNNEL_GRE            (0x1ULL << NGBE_TXD_TUNNEL_TYPE_SHIFT)
+
+/************ ngbe_type.h ************/
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define NGBE_REQ_TX_DESCRIPTOR_MULTIPLE        8
+#define NGBE_REQ_RX_DESCRIPTOR_MULTIPLE        8
+#define NGBE_REQ_TX_BUFFER_GRANULARITY         1024
+
+/* Vlan-specific macros */
+#define NGBE_RX_DESC_SPECIAL_VLAN_MASK 0x0FFF /* VLAN ID in lower 12 bits */
+#define NGBE_RX_DESC_SPECIAL_PRI_MASK  0xE000 /* Priority in upper 3 bits */
+#define NGBE_RX_DESC_SPECIAL_PRI_SHIFT 0x000D /* Priority in upper 3 of 16 */
+#define NGBE_TX_DESC_SPECIAL_PRI_SHIFT NGBE_RX_DESC_SPECIAL_PRI_SHIFT
+
+/* Transmit Descriptor */
+union ngbe_tx_desc {
+	struct {
+		__le64 buffer_addr; /* Address of descriptor's data buf */
+		__le32 cmd_type_len;
+		__le32 olinfo_status;
+	} read;
+	struct {
+		__le64 rsvd; /* Reserved */
+		__le32 nxtseq_seed;
+		__le32 status;
+	} wb;
+};
+
+/* Receive Descriptor */
+union ngbe_rx_desc {
+	struct {
+		__le64 pkt_addr; /* Packet buffer address */
+		__le64 hdr_addr; /* Header buffer address */
+	} read;
+	struct {
+		struct {
+			union {
+				__le32 data;
+				struct {
+					__le16 pkt_info; /* RSS, Pkt type */
+					__le16 hdr_info; /* Splithdr, hdrlen */
+				} hs_rss;
+			} lo_dword;
+			union {
+				__le32 rss; /* RSS Hash */
+				struct {
+					__le16 ip_id; /* IP id */
+					__le16 csum; /* Packet Checksum */
+				} csum_ip;
+			} hi_dword;
+		} lower;
+		struct {
+			__le32 status_error; /* ext status/error */
+			__le16 length; /* Packet length */
+			__le16 vlan; /* VLAN tag */
+		} upper;
+	} wb;  /* writeback */
+};
+
+/* Context descriptors */
+struct ngbe_tx_context_desc {
+	__le32 vlan_macip_lens;
+	__le32 seqnum_seed;
+	__le32 type_tucmd_mlhl;
+	__le32 mss_l4len_idx;
+};
+
+/************************* Flow Directory HASH *******************************/
+/* Software ATR hash keys */
+#define NGBE_ATR_BUCKET_HASH_KEY       0x3DAD14E2
+#define NGBE_ATR_SIGNATURE_HASH_KEY    0x174D3614
+
+/* Software ATR input stream values and masks */
+#define NGBE_ATR_HASH_MASK             0x7fff
+#define NGBE_ATR_L4TYPE_MASK           0x3
+#define NGBE_ATR_L4TYPE_UDP            0x1
+#define NGBE_ATR_L4TYPE_TCP            0x2
+#define NGBE_ATR_L4TYPE_SCTP           0x3
+#define NGBE_ATR_L4TYPE_IPV6_MASK      0x4
+#define NGBE_ATR_L4TYPE_TUNNEL_MASK    0x10
+enum ngbe_atr_flow_type {
+	NGBE_ATR_FLOW_TYPE_IPV4        = 0x0,
+	NGBE_ATR_FLOW_TYPE_UDPV4       = 0x1,
+	NGBE_ATR_FLOW_TYPE_TCPV4       = 0x2,
+	NGBE_ATR_FLOW_TYPE_SCTPV4      = 0x3,
+	NGBE_ATR_FLOW_TYPE_IPV6        = 0x4,
+	NGBE_ATR_FLOW_TYPE_UDPV6       = 0x5,
+	NGBE_ATR_FLOW_TYPE_TCPV6       = 0x6,
+	NGBE_ATR_FLOW_TYPE_SCTPV6      = 0x7,
+	NGBE_ATR_FLOW_TYPE_TUNNELED_IPV4       = 0x10,
+	NGBE_ATR_FLOW_TYPE_TUNNELED_UDPV4      = 0x11,
+	NGBE_ATR_FLOW_TYPE_TUNNELED_TCPV4      = 0x12,
+	NGBE_ATR_FLOW_TYPE_TUNNELED_SCTPV4     = 0x13,
+	NGBE_ATR_FLOW_TYPE_TUNNELED_IPV6       = 0x14,
+	NGBE_ATR_FLOW_TYPE_TUNNELED_UDPV6      = 0x15,
+	NGBE_ATR_FLOW_TYPE_TUNNELED_TCPV6      = 0x16,
+	NGBE_ATR_FLOW_TYPE_TUNNELED_SCTPV6     = 0x17,
+};
+
+/* Flow Director ATR input struct. */
+union ngbe_atr_input {
+	/*
+	 * Byte layout in order, all values with MSB first:
+	 *
+	 * vm_pool      - 1 byte
+	 * flow_type    - 1 byte
+	 * vlan_id      - 2 bytes
+	 * src_ip       - 16 bytes
+	 * inner_mac    - 6 bytes
+	 * cloud_mode   - 2 bytes
+	 * tni_vni      - 4 bytes
+	 * dst_ip       - 16 bytes
+	 * src_port     - 2 bytes
+	 * dst_port     - 2 bytes
+	 * flex_bytes   - 2 bytes
+	 * bkt_hash     - 2 bytes
+	 */
+	struct {
+		u8 vm_pool;
+		u8 flow_type;
+		__be16 vlan_id;
+		__be32 dst_ip[4];
+		__be32 src_ip[4];
+		__be16 src_port;
+		__be16 dst_port;
+		__be16 flex_bytes;
+		__be16 bkt_hash;
+	} formatted;
+	__be32 dword_stream[11];
+};
+
+/* Flow Director compressed ATR hash input struct */
+union ngbe_atr_hash_dword {
+	struct {
+		u8 vm_pool;
+		u8 flow_type;
+		__be16 vlan_id;
+	} formatted;
+	__be32 ip;
+	struct {
+		__be16 src;
+		__be16 dst;
+	} port;
+	__be16 flex_bytes;
+	__be32 dword;
+};
+
+/****************** Manageablility Host Interface defines ********************/
+#define NGBE_HI_MAX_BLOCK_BYTE_LENGTH  256 /* Num of bytes in range */
+#define NGBE_HI_MAX_BLOCK_DWORD_LENGTH 64 /* Num of dwords in range */
+#define NGBE_HI_COMMAND_TIMEOUT        5000 /* Process HI command limit */
+#define NGBE_HI_FLASH_ERASE_TIMEOUT    5000 /* Process Erase command limit */
+#define NGBE_HI_FLASH_UPDATE_TIMEOUT   5000 /* Process Update command limit */
+#define NGBE_HI_FLASH_VERIFY_TIMEOUT   60000 /* Process Apply command limit */
+#define NGBE_HI_PHY_MGMT_REQ_TIMEOUT   2000 /* Wait up to 2 seconds */
+
+/* CEM Support */
+#define FW_CEM_HDR_LEN                  0x4
+#define FW_CEM_CMD_DRIVER_INFO          0xDD
+#define FW_CEM_CMD_DRIVER_INFO_LEN      0x5
+#define FW_CEM_CMD_RESERVED             0X0
+#define FW_CEM_UNUSED_VER               0x0
+#define FW_CEM_MAX_RETRIES              3
+#define FW_CEM_RESP_STATUS_SUCCESS      0x1
+#define FW_READ_SHADOW_RAM_CMD          0x31
+#define FW_READ_SHADOW_RAM_LEN          0x6
+#define FW_WRITE_SHADOW_RAM_CMD         0x33
+#define FW_WRITE_SHADOW_RAM_LEN         0xA /* 8 plus 1 WORD to write */
+#define FW_SHADOW_RAM_DUMP_CMD          0x36
+#define FW_SHADOW_RAM_DUMP_LEN          0
+#define FW_DEFAULT_CHECKSUM             0xFF /* checksum always 0xFF */
+#define FW_NVM_DATA_OFFSET              3
+#define FW_MAX_READ_BUFFER_SIZE         244
+#define FW_DISABLE_RXEN_CMD             0xDE
+#define FW_DISABLE_RXEN_LEN             0x1
+#define FW_PHY_MGMT_REQ_CMD             0x20
+#define FW_RESET_CMD                    0xDF
+#define FW_RESET_LEN                    0x2
+#define FW_SETUP_MAC_LINK_CMD           0xE0
+#define FW_SETUP_MAC_LINK_LEN           0x2
+#define FW_FLASH_UPGRADE_START_CMD      0xE3
+#define FW_FLASH_UPGRADE_START_LEN      0x1
+#define FW_FLASH_UPGRADE_WRITE_CMD      0xE4
+#define FW_FLASH_UPGRADE_VERIFY_CMD     0xE5
+#define FW_FLASH_UPGRADE_VERIFY_LEN     0x4
+#define FW_EEPROM_CHECK_STATUS 			0xE9
+#define FW_PHY_SIGNAL					0xF0
+
+/* Host Interface Command Structures */
+struct ngbe_hic_hdr {
+	u8 cmd;
+	u8 buf_len;
+	union {
+		u8 cmd_resv;
+		u8 ret_status;
+	} cmd_or_resp;
+	u8 checksum;
+};
+
+struct ngbe_hic_hdr2_req {
+	u8 cmd;
+	u8 buf_lenh;
+	u8 buf_lenl;
+	u8 checksum;
+};
+
+struct ngbe_hic_hdr2_rsp {
+	u8 cmd;
+	u8 buf_lenl;
+	u8 buf_lenh_status;     /* 7-5: high bits of buf_len, 4-0: status */
+	u8 checksum;
+};
+
+union ngbe_hic_hdr2 {
+	struct ngbe_hic_hdr2_req req;
+	struct ngbe_hic_hdr2_rsp rsp;
+};
+
+struct ngbe_hic_drv_info {
+	struct ngbe_hic_hdr hdr;
+	u8 port_num;
+	u8 ver_sub;
+	u8 ver_build;
+	u8 ver_min;
+	u8 ver_maj;
+	u8 pad; /* end spacing to ensure length is mult. of dword */
+	u16 pad2; /* end spacing to ensure length is mult. of dword2 */
+};
+
+/* These need to be dword aligned */
+struct ngbe_hic_read_shadow_ram {
+	union ngbe_hic_hdr2 hdr;
+	u32 address;
+	u16 length;
+	u16 pad2;
+	u16 data;
+	u16 pad3;
+};
+
+struct ngbe_hic_write_shadow_ram {
+	union ngbe_hic_hdr2 hdr;
+	u32 address;
+	u16 length;
+	u16 pad2;
+	u16 data;
+	u16 pad3;
+};
+
+struct ngbe_hic_disable_rxen {
+	struct ngbe_hic_hdr hdr;
+	u8  port_number;
+	u8  pad2;
+	u16 pad3;
+};
+
+struct ngbe_hic_reset {
+	struct ngbe_hic_hdr hdr;
+	u16 lan_id;
+	u16 reset_type;
+};
+
+struct ngbe_hic_phy_cfg {
+	struct ngbe_hic_hdr hdr;
+	u8 lan_id;
+	u8 phy_mode;
+	u16 phy_speed;
+};
+
+enum ngbe_module_id {
+	NGBE_MODULE_EEPROM = 0,
+	NGBE_MODULE_FIRMWARE,
+	NGBE_MODULE_HARDWARE,
+	NGBE_MODULE_PCIE
+};
+
+struct ngbe_hic_upg_start {
+	struct ngbe_hic_hdr hdr;
+	u8 module_id;
+	u8  pad2;
+	u16 pad3;
+};
+
+struct ngbe_hic_upg_write {
+	struct ngbe_hic_hdr hdr;
+	u8 data_len;
+	u8 eof_flag;
+	u16 check_sum;
+	u32 data[62];
+};
+
+enum ngbe_upg_flag {
+	NGBE_RESET_NONE = 0,
+	NGBE_RESET_FIRMWARE,
+	NGBE_RELOAD_EEPROM,
+	NGBE_RESET_LAN
+};
+
+struct ngbe_hic_upg_verify {
+	struct ngbe_hic_hdr hdr;
+	u32 action_flag;
+};
+
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define NGBE_PCI_MASTER_DISABLE_TIMEOUT        800
+
+/* Check whether address is multicast. This is little-endian specific check.*/
+#define NGBE_IS_MULTICAST(Address) \
+		(bool)(((u8 *)(Address))[0] & ((u8)0x01))
+
+/* Check whether an address is broadcast. */
+#define NGBE_IS_BROADCAST(Address) \
+		((((u8 *)(Address))[0] == ((u8)0xff)) && \
+		(((u8 *)(Address))[1] == ((u8)0xff)))
+
+/* DCB registers */
+#define NGBE_DCB_MAX_TRAFFIC_CLASS     8
+
+/* Power Manangbeent */
+/* DMA Coalescing configuration */
+struct ngbe_dmac_config {
+	u16     watchdog_timer; /* usec units */
+	bool    fcoe_en;
+	u32     link_speed;
+	u8      fcoe_tc;
+	u8      num_tcs;
+};
+
+/* Autonegotiation advertised speeds */
+typedef u32 ngbe_autoneg_advertised;
+/* Link speed */
+#define NGBE_LINK_SPEED_UNKNOWN        0
+#define NGBE_LINK_SPEED_100_FULL       1
+#define NGBE_LINK_SPEED_1GB_FULL       2
+#define NGBE_LINK_SPEED_10_FULL        8
+#define NGBE_LINK_SPEED_AUTONEG  (NGBE_LINK_SPEED_100_FULL | \
+				   NGBE_LINK_SPEED_1GB_FULL | \
+				   NGBE_LINK_SPEED_10_FULL)
+
+/* Physical layer type */
+typedef u32 ngbe_physical_layer;
+#define NGBE_PHYSICAL_LAYER_UNKNOWN            0
+#define NGBE_PHYSICAL_LAYER_1000BASE_T         0x0002
+#define NGBE_PHYSICAL_LAYER_100BASE_TX         0x0004
+#define NGBE_PHYSICAL_LAYER_SFP_PLUS_CU        0x0008
+#define NGBE_PHYSICAL_LAYER_1000BASE_KX        0x0200
+#define NGBE_PHYSICAL_LAYER_1000BASE_BX        0x0400
+#define NGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA      0x2000
+#define NGBE_PHYSICAL_LAYER_1000BASE_SX        0x4000
+
+/* Special PHY Init Routine */
+#define NGBE_PHY_INIT_OFFSET_NL        0x002B
+#define NGBE_PHY_INIT_END_NL           0xFFFF
+#define NGBE_CONTROL_MASK_NL           0xF000
+#define NGBE_DATA_MASK_NL              0x0FFF
+#define NGBE_CONTROL_SHIFT_NL          12
+#define NGBE_DELAY_NL                  0
+#define NGBE_DATA_NL                   1
+#define NGBE_CONTROL_NL                0x000F
+#define NGBE_CONTROL_EOL_NL            0x0FFF
+#define NGBE_CONTROL_SOL_NL            0x0000
+
+/* ethtool */
+#define SPEED_10        10
+#define SPEED_100       100
+#define SPEED_1000      1000
+
+/* Flow Control Data Sheet defined values
+ * Calculation and defines taken from 802.1bb Annex O
+ */
+
+/* BitTimes (BT) conversion */
+#define NGBE_BT2KB(BT)         ((BT + (8 * 1024 - 1)) / (8 * 1024))
+#define NGBE_B2BT(BT)          (BT * 8)
+
+/* Calculate Delay to respond to PFC */
+#define NGBE_PFC_D     672
+
+/* Calculate Cable Delay */
+#define NGBE_CABLE_DC  5556 /* Delay Copper */
+#define NGBE_CABLE_DO  5000 /* Delay Optical */
+
+/* Calculate Interface Delay X540 */
+#define NGBE_PHY_DC    25600 /* Delay 10G BASET */
+#define NGBE_MAC_DC    8192  /* Delay Copper XAUI interface */
+#define NGBE_XAUI_DC   (2 * 2048) /* Delay Copper Phy */
+
+#define NGBE_ID_X540   (NGBE_MAC_DC + NGBE_XAUI_DC + NGBE_PHY_DC)
+
+/* Calculate Interface Delay */
+#define NGBE_PHY_D     12800
+#define NGBE_MAC_D     4096
+#define NGBE_XAUI_D    (2 * 1024)
+
+#define NGBE_ID        (NGBE_MAC_D + NGBE_XAUI_D + NGBE_PHY_D)
+
+/* Calculate Delay incurred from higher layer */
+#define NGBE_HD        6144
+
+/* Calculate PCI Bus delay for low thresholds */
+#define NGBE_PCI_DELAY 10000
+
+/* Calculate X540 delay value in bit times */
+#define NGBE_DV_X540(_max_frame_link, _max_frame_tc) \
+			((36 * \
+			  (NGBE_B2BT(_max_frame_link) + \
+			   NGBE_PFC_D + \
+			   (2 * NGBE_CABLE_DC) + \
+			   (2 * NGBE_ID_X540) + \
+			   NGBE_HD) / 25 + 1) + \
+			 2 * NGBE_B2BT(_max_frame_tc))
+
+
+/* Calculate delay value in bit times */
+#define NGBE_DV(_max_frame_link, _max_frame_tc) \
+			((36 * \
+			  (NGBE_B2BT(_max_frame_link) + \
+			   NGBE_PFC_D + \
+			   (2 * NGBE_CABLE_DC) + \
+			   (2 * NGBE_ID) + \
+			   NGBE_HD) / 25 + 1) + \
+			 2 * NGBE_B2BT(_max_frame_tc))
+
+/* Calculate low threshold delay values */
+#define NGBE_LOW_DV_X540(_max_frame_tc) \
+			(2 * NGBE_B2BT(_max_frame_tc) + \
+			(36 * NGBE_PCI_DELAY / 25) + 1)
+
+#define NGBE_LOW_DV(_max_frame_tc) \
+			(2 * NGBE_LOW_DV_X540(_max_frame_tc))
+
+/*
+ * Unavailable: The FCoE Boot Option ROM is not present in the flash.
+ * Disabled: Present; boot order is not set for any targets on the port.
+ * Enabled: Present; boot order is set for at least one target on the port.
+ */
+enum ngbe_fcoe_boot_status {
+	ngbe_fcoe_bootstatus_disabled = 0,
+	ngbe_fcoe_bootstatus_enabled = 1,
+	ngbe_fcoe_bootstatus_unavailable = 0xFFFF
+};
+
+enum ngbe_eeprom_type {
+	ngbe_eeprom_uninitialized = 0,
+	ngbe_eeprom_spi,
+	ngbe_flash,
+	ngbe_eeprom_none /* No NVM support */
+};
+
+enum ngbe_phy_type {
+	ngbe_phy_unknown = 0,
+	ngbe_phy_none,
+	ngbe_phy_internal,
+	ngbe_phy_m88e1512,
+	ngbe_phy_m88e1512_sfi,
+	ngbe_phy_yt8521s,
+	ngbe_phy_yt8521s_sfi,
+	ngbe_phy_zte,
+	ngbe_phy_sfp_passive_tyco,
+	ngbe_phy_sfp_passive_unknown,
+	ngbe_phy_sfp_active_unknown,
+	ngbe_phy_sfp_avago,
+	ngbe_phy_sfp_ftl,
+	ngbe_phy_sfp_ftl_active,
+	ngbe_phy_sfp_unknown,
+	ngbe_phy_sfp_intel,
+	ngbe_phy_sfp_unsupported, /*Enforce bit set with unsupported module*/
+	ngbe_phy_generic
+};
+
+/*
+ * SFP+ module type IDs:
+ *
+ * ID   Module Type
+ * =============
+ * 0    SFP_DA_CU
+ * 1    SFP_SR
+ * 2    SFP_LR
+ * 3    SFP_DA_CU_CORE0
+ * 4    SFP_DA_CU_CORE1
+ * 5    SFP_SR/LR_CORE0
+ * 6    SFP_SR/LR_CORE1
+ */
+enum ngbe_sfp_type {
+	ngbe_sfp_type_da_cu = 0,
+	ngbe_sfp_type_sr = 1,
+	ngbe_sfp_type_lr = 2,
+	ngbe_sfp_type_da_cu_core0 = 3,
+	ngbe_sfp_type_da_cu_core1 = 4,
+	ngbe_sfp_type_srlr_core0 = 5,
+	ngbe_sfp_type_srlr_core1 = 6,
+	ngbe_sfp_type_da_act_lmt_core0 = 7,
+	ngbe_sfp_type_da_act_lmt_core1 = 8,
+	ngbe_sfp_type_1g_cu_core0 = 9,
+	ngbe_sfp_type_1g_cu_core1 = 10,
+	ngbe_sfp_type_1g_sx_core0 = 11,
+	ngbe_sfp_type_1g_sx_core1 = 12,
+	ngbe_sfp_type_1g_lx_core0 = 13,
+	ngbe_sfp_type_1g_lx_core1 = 14,
+	ngbe_sfp_type_not_present = 0xFFFE,
+	ngbe_sfp_type_unknown = 0xFFFF
+};
+
+enum ngbe_media_type {
+	ngbe_media_type_unknown = 0,
+	ngbe_media_type_fiber,
+	ngbe_media_type_copper,
+	ngbe_media_type_backplane,
+	ngbe_media_type_virtual
+};
+
+/* Flow Control Settings */
+enum ngbe_fc_mode {
+	ngbe_fc_none = 0,
+	ngbe_fc_rx_pause,
+	ngbe_fc_tx_pause,
+	ngbe_fc_full,
+	ngbe_fc_default
+};
+
+/* Smart Speed Settings */
+#define NGBE_SMARTSPEED_MAX_RETRIES    3
+enum ngbe_smart_speed {
+	ngbe_smart_speed_auto = 0,
+	ngbe_smart_speed_on,
+	ngbe_smart_speed_off
+};
+
+/* PCI bus types */
+enum ngbe_bus_type {
+	ngbe_bus_type_unknown = 0,
+	ngbe_bus_type_pci,
+	ngbe_bus_type_pcix,
+	ngbe_bus_type_pci_express,
+	ngbe_bus_type_internal,
+	ngbe_bus_type_reserved
+};
+
+/* PCI bus speeds */
+enum ngbe_bus_speed {
+	ngbe_bus_speed_unknown	= 0,
+	ngbe_bus_speed_33	= 33,
+	ngbe_bus_speed_66	= 66,
+	ngbe_bus_speed_100	= 100,
+	ngbe_bus_speed_120	= 120,
+	ngbe_bus_speed_133	= 133,
+	ngbe_bus_speed_2500	= 2500,
+	ngbe_bus_speed_5000	= 5000,
+	ngbe_bus_speed_8000	= 8000,
+	ngbe_bus_speed_reserved
+};
+
+/* PCI bus widths */
+enum ngbe_bus_width {
+	ngbe_bus_width_unknown	= 0,
+	ngbe_bus_width_pcie_x1	= 1,
+	ngbe_bus_width_pcie_x2	= 2,
+	ngbe_bus_width_pcie_x4	= 4,
+	ngbe_bus_width_pcie_x8	= 8,
+	ngbe_bus_width_32	= 32,
+	ngbe_bus_width_64	= 64,
+	ngbe_bus_width_reserved
+};
+
+struct ngbe_addr_filter_info {
+	u32 num_mc_addrs;
+	u32 rar_used_count;
+	u32 mta_in_use;
+	u32 overflow_promisc;
+	bool user_set_promisc;
+};
+
+/* Bus parameters */
+struct ngbe_bus_info {
+	enum ngbe_bus_speed speed;
+	enum ngbe_bus_width width;
+	enum ngbe_bus_type type;
+
+	u16 func;
+	u16 lan_id;
+};
+
+/* Flow control parameters */
+struct ngbe_fc_info {
+	u32 high_water; /* Flow Ctrl High-water */
+	u32 low_water; /* Flow Ctrl Low-water */
+	u16 pause_time; /* Flow Control Pause timer */
+	bool send_xon; /* Flow control send XON */
+	bool strict_ieee; /* Strict IEEE mode */
+	bool disable_fc_autoneg; /* Do not autonegotiate FC */
+	bool fc_was_autonegged; /* Is current_mode the result of autonegging? */
+	enum ngbe_fc_mode current_mode; /* FC mode in effect */
+	enum ngbe_fc_mode requested_mode; /* FC mode requested by caller */
+};
+
+/* Statistics counters collected by the MAC */
+struct ngbe_hw_stats {
+	u64 crcerrs;
+	u64 illerrc;
+	u64 errbc;
+	u64 mspdc;
+	u64 mpctotal;
+	u64 mpc[8];
+	u64 mlfc;
+	u64 mrfc;
+	u64 rlec;
+	u64 lxontxc;
+	u64 lxonrxc;
+	u64 lxofftxc;
+	u64 lxoffrxc;
+	u64 pxontxc[8];
+	u64 pxonrxc[8];
+	u64 pxofftxc[8];
+	u64 pxoffrxc[8];
+	u64 prc64;
+	u64 prc127;
+	u64 prc255;
+	u64 prc511;
+	u64 prc1023;
+	u64 prc1522;
+	u64 gprc;
+	u64 bprc;
+	u64 mprc;
+	u64 gptc;
+	u64 gorc;
+	u64 gotc;
+	u64 rnbc[8];
+	u64 ruc;
+	u64 rfc;
+	u64 roc;
+	u64 rjc;
+	u64 mngprc;
+	u64 mngpdc;
+	u64 mngptc;
+	u64 tor;
+	u64 tpr;
+	u64 tpt;
+	u64 ptc64;
+	u64 ptc127;
+	u64 ptc255;
+	u64 ptc511;
+	u64 ptc1023;
+	u64 ptc1522;
+	u64 mptc;
+	u64 bptc;
+	u64 xec;
+	u64 qprc[16];
+	u64 qptc[16];
+	u64 qbrc[16];
+	u64 qbtc[16];
+	u64 qprdc[16];
+	u64 pxon2offc[8];
+	u64 fccrc;
+	u64 fclast;
+	u64 fcoerpdc;
+	u64 fcoeprc;
+	u64 fcoeptc;
+	u64 fcoedwrc;
+	u64 fcoedwtc;
+	u64 fcoe_noddp;
+	u64 fcoe_noddp_ext_buff;
+	u64 ldpcec;
+	u64 pcrc8ec;
+	u64 b2ospc;
+	u64 b2ogprc;
+	u64 o2bgptc;
+	u64 o2bspc;
+};
+
+/* forward declaration */
+struct ngbe_hw;
+
+/* iterator type for walking multicast address lists */
+typedef u8* (*ngbe_mc_addr_itr) (struct ngbe_hw *hw, u8 **mc_addr_ptr,
+				  u32 *vmdq);
+
+/* Function pointer table */
+struct ngbe_eeprom_operations {
+	s32 (*init_params)(struct ngbe_hw *);
+	s32 (*read)(struct ngbe_hw *, u16, u16 *);
+	s32 (*read_buffer)(struct ngbe_hw *, u16, u16, u16 *);
+	s32 (*read32)(struct ngbe_hw *, u16, u32 *);
+	s32 (*write)(struct ngbe_hw *, u16, u16);
+	s32 (*write_buffer)(struct ngbe_hw *, u16, u16, u16 *);
+	s32 (*validate_checksum)(struct ngbe_hw *, u16 *);
+	s32 (*update_checksum)(struct ngbe_hw *);
+	s32 (*calc_checksum)(struct ngbe_hw *);
+	s32 (*eeprom_chksum_cap_st)(struct ngbe_hw *, u16, u32 *);
+	s32 (*phy_signal_set)(struct ngbe_hw *);
+};
+
+struct ngbe_flash_operations {
+	s32 (*init_params)(struct ngbe_hw *);
+	s32 (*read_buffer)(struct ngbe_hw *, u32, u32, u32 *);
+	s32 (*write_buffer)(struct ngbe_hw *, u32, u32, u32 *);
+};
+
+struct ngbe_mac_operations {
+	s32 (*init_hw)(struct ngbe_hw *);
+	s32 (*reset_hw)(struct ngbe_hw *);
+	s32 (*start_hw)(struct ngbe_hw *);
+	s32 (*clear_hw_cntrs)(struct ngbe_hw *);
+	enum ngbe_media_type (*get_media_type)(struct ngbe_hw *);
+	s32 (*get_mac_addr)(struct ngbe_hw *, u8 *);
+	s32 (*get_device_caps)(struct ngbe_hw *, u16 *);
+	s32 (*stop_adapter)(struct ngbe_hw *);
+	s32 (*get_bus_info)(struct ngbe_hw *);
+	void (*set_lan_id)(struct ngbe_hw *);
+	s32 (*enable_rx_dma)(struct ngbe_hw *, u32);
+	s32 (*disable_sec_rx_path)(struct ngbe_hw *);
+	s32 (*enable_sec_rx_path)(struct ngbe_hw *);
+	s32 (*acquire_swfw_sync)(struct ngbe_hw *, u32);
+	void (*release_swfw_sync)(struct ngbe_hw *, u32);
+
+	/* Link */
+	void (*disable_tx_laser)(struct ngbe_hw *);
+	void (*enable_tx_laser)(struct ngbe_hw *);
+	void (*flap_tx_laser)(struct ngbe_hw *);
+	s32 (*setup_link)(struct ngbe_hw *, u32, bool);
+	s32 (*setup_mac_link)(struct ngbe_hw *, u32, bool);
+	s32 (*check_link)(struct ngbe_hw *, u32 *, bool *, bool);
+	s32 (*get_link_capabilities)(struct ngbe_hw *, u32 *,
+				     bool *);
+	void (*set_rate_select_speed)(struct ngbe_hw *, u32);
+
+	/* Packet Buffer manipulation */
+	void (*setup_rxpba)(struct ngbe_hw *, int, u32, int);
+
+	/* LED */
+	s32 (*led_on)(struct ngbe_hw *, u32);
+	s32 (*led_off)(struct ngbe_hw *, u32);
+
+	/* RAR, Multicast, VLAN */
+	s32 (*set_rar)(struct ngbe_hw *, u32, u8 *, u64, u32);
+	s32 (*clear_rar)(struct ngbe_hw *, u32);
+	s32 (*insert_mac_addr)(struct ngbe_hw *, u8 *, u32);
+	s32 (*set_vmdq)(struct ngbe_hw *, u32, u32);
+	s32 (*set_vmdq_san_mac)(struct ngbe_hw *, u32);
+	s32 (*clear_vmdq)(struct ngbe_hw *, u32, u32);
+	s32 (*init_rx_addrs)(struct ngbe_hw *);
+	s32 (*update_uc_addr_list)(struct ngbe_hw *, u8 *, u32,
+				   ngbe_mc_addr_itr);
+	s32 (*update_mc_addr_list)(struct ngbe_hw *, u8 *, u32,
+				   ngbe_mc_addr_itr, bool clear);
+	s32 (*enable_mc)(struct ngbe_hw *);
+	s32 (*disable_mc)(struct ngbe_hw *);
+	s32 (*clear_vfta)(struct ngbe_hw *);
+	s32 (*set_vfta)(struct ngbe_hw *, u32, u32, bool);
+	s32 (*set_vlvf)(struct ngbe_hw *, u32, u32, bool, bool *);
+	s32 (*init_uta_tables)(struct ngbe_hw *);
+	void (*set_mac_anti_spoofing)(struct ngbe_hw *, bool, int);
+	void (*set_vlan_anti_spoofing)(struct ngbe_hw *, bool, int);
+
+	/* Flow Control */
+	s32 (*fc_enable)(struct ngbe_hw *);
+	s32 (*setup_fc)(struct ngbe_hw *);
+
+	/* Manageability interface */
+	s32 (*set_fw_drv_ver)(struct ngbe_hw *, u8, u8, u8, u8);
+	s32 (*get_thermal_sensor_data)(struct ngbe_hw *);
+	s32 (*init_thermal_sensor_thresh)(struct ngbe_hw *hw);
+	void (*get_rtrup2tc)(struct ngbe_hw *hw, u8 *map);
+	void (*disable_rx)(struct ngbe_hw *hw);
+	void (*enable_rx)(struct ngbe_hw *hw);
+	void (*set_source_address_pruning)(struct ngbe_hw *, bool,
+					   unsigned int);
+	void (*set_ethertype_anti_spoofing)(struct ngbe_hw *, bool, int);
+	s32 (*dmac_config)(struct ngbe_hw *hw);
+	s32 (*setup_eee)(struct ngbe_hw *hw, bool enable_eee);
+};
+
+struct ngbe_phy_operations {
+	s32 (*identify)(struct ngbe_hw *);
+	s32 (*identify_sfp)(struct ngbe_hw *);
+	s32 (*init)(struct ngbe_hw *);
+	s32 (*reset)(struct ngbe_hw *);
+	s32 (*read_reg)(struct ngbe_hw *, u32, u32, u16 *);
+	s32 (*write_reg)(struct ngbe_hw *, u32, u32, u16);
+	s32 (*read_reg_mdi)(struct ngbe_hw *, u32, u32, u16 *);
+	s32 (*write_reg_mdi)(struct ngbe_hw *, u32, u32, u16);
+	u32 (*setup_link)(struct ngbe_hw *, u32, bool);
+	s32 (*setup_internal_link)(struct ngbe_hw *);
+	u32 (*setup_link_speed)(struct ngbe_hw *, u32, bool);
+	s32 (*check_link)(struct ngbe_hw *, u32 *, bool *);
+	s32 (*check_overtemp)(struct ngbe_hw *);
+	s32 (*check_event)(struct ngbe_hw *);
+	s32 (*get_adv_pause)(struct ngbe_hw *, u8 *);
+	s32 (*get_lp_adv_pause)(struct ngbe_hw *, u8 *);
+	s32 (*set_adv_pause)(struct ngbe_hw *, u16);
+	s32 (*setup_once)(struct ngbe_hw *);
+};
+
+struct ngbe_eeprom_info {
+	struct ngbe_eeprom_operations ops;
+	enum ngbe_eeprom_type type;
+	u32 semaphore_delay;
+	u16 word_size;
+	u16 address_bits;
+	u16 word_page_size;
+	u16 ctrl_word_3;
+	u16 sw_region_offset;
+};
+
+struct ngbe_flash_info {
+	struct ngbe_flash_operations ops;
+	u32 semaphore_delay;
+	u32 dword_size;
+	u16 address_bits;
+};
+
+#define NGBE_FLAGS_DOUBLE_RESET_REQUIRED       0x01
+struct ngbe_mac_info {
+	struct ngbe_mac_operations ops;
+	u8 addr[NGBE_ETH_LENGTH_OF_ADDRESS];
+	u8 perm_addr[NGBE_ETH_LENGTH_OF_ADDRESS];
+	u8 san_addr[NGBE_ETH_LENGTH_OF_ADDRESS];
+	/* prefix for World Wide Node Name (WWNN) */
+	u16 wwnn_prefix;
+	/* prefix for World Wide Port Name (WWPN) */
+	u16 wwpn_prefix;
+#define NGBE_MAX_MTA                   128
+#define NGBE_MAX_VFTA_ENTRIES          128
+	u32 mta_shadow[NGBE_MAX_MTA];
+	s32 mc_filter_type;
+	u32 mcft_size;
+	u32 vft_shadow[NGBE_MAX_VFTA_ENTRIES];
+	u32 vft_size;
+	u32 num_rar_entries;
+	u32 rar_highwater;
+	u32 rx_pb_size;
+	u32 max_tx_queues;
+	u32 max_rx_queues;
+	u32 orig_sr_pcs_ctl2;
+	u32 orig_sr_pma_mmd_ctl1;
+	u32 orig_sr_an_mmd_ctl;
+	u32 orig_sr_an_mmd_adv_reg2;
+	u32 orig_vr_xs_or_pcs_mmd_digi_ctl1;
+	u8  san_mac_rar_index;
+	bool get_link_status;
+	u16 max_msix_vectors;
+	bool arc_subsystem_valid;
+	bool orig_link_settings_stored;
+	bool autotry_restart;
+	u8 flags;
+	struct ngbe_thermal_sensor_data  thermal_sensor_data;
+	bool thermal_sensor_enabled;
+	struct ngbe_dmac_config dmac_config;
+	bool set_lben;
+	bool autoneg;
+};
+
+struct ngbe_phy_info {
+	struct ngbe_phy_operations ops;
+	enum ngbe_phy_type type;
+	u32 addr;
+	u32 id;
+	enum ngbe_sfp_type sfp_type;
+	bool sfp_setup_needed;
+	u32 revision;
+	enum ngbe_media_type media_type;
+	u32 phy_semaphore_mask;
+	u8 lan_id; /* to be delete */
+	ngbe_autoneg_advertised autoneg_advertised;
+	enum ngbe_smart_speed smart_speed;
+	bool smart_speed_active;
+	bool multispeed_fiber;
+	bool reset_if_overtemp;
+	ngbe_physical_layer link_mode;
+};
+
+#include "ngbe_mbx.h"
+
+struct ngbe_mbx_operations {
+	void (*init_params)(struct ngbe_hw *hw);
+	s32  (*read)(struct ngbe_hw *, u32 *, u16,  u16);
+	s32  (*write)(struct ngbe_hw *, u32 *, u16, u16);
+	s32  (*read_posted)(struct ngbe_hw *, u32 *, u16,  u16);
+	s32  (*write_posted)(struct ngbe_hw *, u32 *, u16, u16);
+	s32  (*check_for_msg)(struct ngbe_hw *, u16);
+	s32  (*check_for_ack)(struct ngbe_hw *, u16);
+	s32  (*check_for_rst)(struct ngbe_hw *, u16);
+};
+
+struct ngbe_mbx_stats {
+	u32 msgs_tx;
+	u32 msgs_rx;
+
+	u32 acks;
+	u32 reqs;
+	u32 rsts;
+};
+
+struct ngbe_mbx_info {
+	struct ngbe_mbx_operations ops;
+	struct ngbe_mbx_stats stats;
+	u32 timeout;
+	u32 udelay;
+	u32 v2p_mailbox;
+	u16 size;
+};
+
+enum ngbe_reset_type {
+	NGBE_LAN_RESET = 0,
+	NGBE_SW_RESET,
+	NGBE_GLOBAL_RESET
+};
+
+enum ngbe_link_status {
+	NGBE_LINK_STATUS_NONE = 0,
+	NGBE_LINK_STATUS_KX,
+	NGBE_LINK_STATUS_KX4
+};
+
+struct ngbe_hw {
+	u8 __iomem *hw_addr;
+	void *back;
+	struct ngbe_mac_info mac;
+	struct ngbe_addr_filter_info addr_ctrl;
+	struct ngbe_fc_info fc;
+	struct ngbe_phy_info phy;
+	struct ngbe_eeprom_info eeprom;
+	struct ngbe_flash_info flash;
+	struct ngbe_bus_info bus;
+	struct ngbe_mbx_info mbx;
+	u16 device_id;
+	u16 vendor_id;
+	u16 subsystem_device_id;
+	u16 subsystem_vendor_id;
+	u8 revision_id;
+	bool adapter_stopped;
+	int api_version;
+	enum ngbe_reset_type reset_type;
+	bool force_full_reset;
+	bool allow_unsupported_sfp;
+	bool wol_enabled;
+	enum ngbe_link_status link_status;
+	u16 tpid[8];
+};
+
+#define TCALL(hw, func, args...) (((hw)->func != NULL) \
+		? (hw)->func((hw), ##args) : NGBE_NOT_IMPLEMENTED)
+
+/* Error Codes */
+#define NGBE_OK                                 0
+#define NGBE_ERR                                100
+#define NGBE_NOT_IMPLEMENTED                    0x7FFFFFFF
+/* (-NGBE_ERR, NGBE_ERR): reserved for non-ngbe defined error code */
+#define NGBE_ERR_NOSUPP                        -(NGBE_ERR+0)
+#define NGBE_ERR_EEPROM                        -(NGBE_ERR+1)
+#define NGBE_ERR_EEPROM_CHECKSUM               -(NGBE_ERR+2)
+#define NGBE_ERR_PHY                           -(NGBE_ERR+3)
+#define NGBE_ERR_CONFIG                        -(NGBE_ERR+4)
+#define NGBE_ERR_PARAM                         -(NGBE_ERR+5)
+#define NGBE_ERR_MAC_TYPE                      -(NGBE_ERR+6)
+#define NGBE_ERR_UNKNOWN_PHY                   -(NGBE_ERR+7)
+#define NGBE_ERR_LINK_SETUP                    -(NGBE_ERR+8)
+#define NGBE_ERR_ADAPTER_STOPPED               -(NGBE_ERR+9)
+#define NGBE_ERR_INVALID_MAC_ADDR              -(NGBE_ERR+10)
+#define NGBE_ERR_DEVICE_NOT_SUPPORTED          -(NGBE_ERR+11)
+#define NGBE_ERR_MASTER_REQUESTS_PENDING       -(NGBE_ERR+12)
+#define NGBE_ERR_INVALID_LINK_SETTINGS         -(NGBE_ERR+13)
+#define NGBE_ERR_AUTONEG_NOT_COMPLETE          -(NGBE_ERR+14)
+#define NGBE_ERR_RESET_FAILED                  -(NGBE_ERR+15)
+#define NGBE_ERR_SWFW_SYNC                     -(NGBE_ERR+16)
+#define NGBE_ERR_PHY_ADDR_INVALID              -(NGBE_ERR+17)
+#define NGBE_ERR_I2C                           -(NGBE_ERR+18)
+#define NGBE_ERR_SFP_NOT_SUPPORTED             -(NGBE_ERR+19)
+#define NGBE_ERR_SFP_NOT_PRESENT               -(NGBE_ERR+20)
+#define NGBE_ERR_SFP_NO_INIT_SEQ_PRESENT       -(NGBE_ERR+21)
+#define NGBE_ERR_NO_SAN_ADDR_PTR               -(NGBE_ERR+22)
+#define NGBE_ERR_FDIR_REINIT_FAILED            -(NGBE_ERR+23)
+#define NGBE_ERR_EEPROM_VERSION                -(NGBE_ERR+24)
+#define NGBE_ERR_NO_SPACE                      -(NGBE_ERR+25)
+#define NGBE_ERR_OVERTEMP                      -(NGBE_ERR+26)
+#define NGBE_ERR_UNDERTEMP                     -(NGBE_ERR+27)
+#define NGBE_ERR_FC_NOT_NEGOTIATED             -(NGBE_ERR+28)
+#define NGBE_ERR_FC_NOT_SUPPORTED              -(NGBE_ERR+29)
+#define NGBE_ERR_SFP_SETUP_NOT_COMPLETE        -(NGBE_ERR+30)
+#define NGBE_ERR_PBA_SECTION                   -(NGBE_ERR+31)
+#define NGBE_ERR_INVALID_ARGUMENT              -(NGBE_ERR+32)
+#define NGBE_ERR_HOST_INTERFACE_COMMAND        -(NGBE_ERR+33)
+#define NGBE_ERR_OUT_OF_MEM                    -(NGBE_ERR+34)
+#define NGBE_ERR_FEATURE_NOT_SUPPORTED         -(NGBE_ERR+36)
+#define NGBE_ERR_EEPROM_PROTECTED_REGION       -(NGBE_ERR+37)
+#define NGBE_ERR_FDIR_CMD_INCOMPLETE           -(NGBE_ERR+38)
+#define NGBE_ERR_FLASH_LOADING_FAILED          -(NGBE_ERR+39)
+#define NGBE_ERR_XPCS_POWER_UP_FAILED          -(NGBE_ERR+40)
+#define NGBE_ERR_FW_RESP_INVALID               -(NGBE_ERR+41)
+#define NGBE_ERR_PHY_INIT_NOT_DONE             -(NGBE_ERR+42)
+#define NGBE_ERR_TIMEOUT                       -(NGBE_ERR+43)
+#define NGBE_ERR_TOKEN_RETRY                   -(NGBE_ERR+44)
+#define NGBE_ERR_REGISTER                      -(NGBE_ERR+45)
+#define NGBE_ERR_MBX                           -(NGBE_ERR+46)
+#define NGBE_ERR_MNG_ACCESS_FAILED             -(NGBE_ERR+47)
+#define NGBE_ERR_PHY_TYPE                      -(NGBE_ERR+48)
+#define NGBE_ERR_PHY_TIMEOUT                   -(NGBE_ERR+49)
+
+/**
+ * register operations
+ **/
+/* read register */
+#define NGBE_DEAD_READ_RETRIES     10
+#define NGBE_DEAD_READ_REG         0xdeadbeefU
+#define NGBE_DEAD_READ_REG64       0xdeadbeefdeadbeefULL
+
+#define NGBE_FAILED_READ_REG       0xffffffffU
+#define NGBE_FAILED_READ_REG64     0xffffffffffffffffULL
+
+static inline bool NGBE_REMOVED(void __iomem *addr)
+{
+	return unlikely(!addr);
+}
+
+static inline u32
+ngbe_rd32(u8 __iomem *base)
+{
+	return readl(base);
+}
+
+static inline u32
+rd32(struct ngbe_hw *hw, u32 reg)
+{
+	u8 __iomem *base = READ_ONCE(hw->hw_addr);
+	u32 val = NGBE_FAILED_READ_REG;
+
+	if (unlikely(!base))
+		return val;
+
+	val = ngbe_rd32(base + reg);
+
+	return val;
+}
+#define rd32a(a, reg, offset) ( \
+	rd32((a), (reg) + ((offset) << 2)))
+
+static inline u32
+rd32m(struct ngbe_hw *hw, u32 reg, u32 mask)
+{
+	u8 __iomem *base = READ_ONCE(hw->hw_addr);
+	u32 val = NGBE_FAILED_READ_REG;
+
+	if (unlikely(!base))
+		return val;
+
+	val = ngbe_rd32(base + reg);
+	if (unlikely(val == NGBE_FAILED_READ_REG))
+		return val;
+
+	return val & mask;
+}
+
+/* write register */
+static inline void
+ngbe_wr32(u8 __iomem *base, u32 val)
+{
+	writel(val, base);
+}
+
+static inline void
+wr32(struct ngbe_hw *hw, u32 reg, u32 val)
+{
+	u8 __iomem *base = READ_ONCE(hw->hw_addr);
+
+	if (unlikely(!base))
+		return;
+
+	ngbe_wr32(base + reg, val);
+}
+#define wr32a(a, reg, off, val) \
+	wr32((a), (reg) + ((off) << 2), (val))
+
+static inline void
+wr32m(struct ngbe_hw *hw, u32 reg, u32 mask, u32 field)
+{
+	u8 __iomem *base = READ_ONCE(hw->hw_addr);
+	u32 val;
+
+	if (unlikely(!base))
+		return;
+
+	val = ngbe_rd32(base + reg);
+	if (unlikely(val == NGBE_FAILED_READ_REG))
+		return;
+
+	val = ((val & ~mask) | (field & mask));
+	ngbe_wr32(base + reg, val);
+}
+
+/* poll register */
+#define NGBE_MDIO_TIMEOUT 1000
+#define NGBE_I2C_TIMEOUT  1000
+#define NGBE_SPI_TIMEOUT  1000
+static inline s32
+po32m(struct ngbe_hw *hw, u32 reg,
+		u32 mask, u32 field, int usecs, int count)
+{
+	int loop;
+
+	loop = (count ? count : (usecs + 9) / 10);
+	usecs = (loop ? (usecs + loop - 1) / loop : 0);
+
+	count = loop;
+	do {
+		u32 value = rd32(hw, reg);
+		if ((value & mask) == (field & mask)) {
+			break;
+		}
+
+		if (loop-- <= 0)
+			break;
+
+		udelay(usecs);
+	} while (true);
+
+	return (count - loop <= count ? 0 : NGBE_ERR_TIMEOUT);
+}
+
+#define NGBE_WRITE_FLUSH(H) rd32(H, NGBE_MIS_PWR)
+
+#endif /* _NGBE_TYPE_H_ */
-- 
2.25.1

    

[PATCH openEuler-1.0-LTS 1/2] net: ngbe: Add Netswift Giga NIC driver