From: Piotr Wojtaszczyk piotr.wojtaszczyk@timesys.com
stable inclusion from stable-v5.10.222 commit 2849a1b747cf37aa5b684527104d3a53f1e296d2 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAGS5X CVE: CVE-2024-42153
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit f63b94be6942ba82c55343e196bd09b53227618e ]
When del_timer_sync() is called in an interrupt context it throws a warning because of potential deadlock. The timer is used only to exit from wait_for_completion() after a timeout so replacing the call with wait_for_completion_timeout() allows to remove the problematic timer and its related functions altogether.
Fixes: 41561f28e76a ("i2c: New Philips PNX bus driver") Signed-off-by: Piotr Wojtaszczyk piotr.wojtaszczyk@timesys.com Signed-off-by: Andi Shyti andi.shyti@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Lin RuiFeng linruifeng4@huawei.com --- drivers/i2c/busses/i2c-pnx.c | 48 ++++++++---------------------------- 1 file changed, 10 insertions(+), 38 deletions(-)
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 8c4ec7f13f5a..b6b5a65efcbb 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -15,7 +15,6 @@ #include <linux/ioport.h> #include <linux/delay.h> #include <linux/i2c.h> -#include <linux/timer.h> #include <linux/completion.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -32,7 +31,6 @@ struct i2c_pnx_mif { int ret; /* Return value */ int mode; /* Interface mode */ struct completion complete; /* I/O completion */ - struct timer_list timer; /* Timeout */ u8 * buf; /* Data buffer */ int len; /* Length of data buffer */ int order; /* RX Bytes to order via TX */ @@ -117,24 +115,6 @@ static inline int wait_reset(struct i2c_pnx_algo_data *data) return (timeout <= 0); }
-static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data) -{ - struct timer_list *timer = &alg_data->mif.timer; - unsigned long expires = msecs_to_jiffies(alg_data->timeout); - - if (expires <= 1) - expires = 2; - - del_timer_sync(timer); - - dev_dbg(&alg_data->adapter.dev, "Timer armed at %lu plus %lu jiffies.\n", - jiffies, expires); - - timer->expires = jiffies + expires; - - add_timer(timer); -} - /** * i2c_pnx_start - start a device * @slave_addr: slave address @@ -259,8 +239,6 @@ static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data) ~(mcntrl_afie | mcntrl_naie | mcntrl_drmie), I2C_REG_CTL(alg_data));
- del_timer_sync(&alg_data->mif.timer); - dev_dbg(&alg_data->adapter.dev, "%s(): Waking up xfer routine.\n", __func__); @@ -276,8 +254,6 @@ static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data) ~(mcntrl_afie | mcntrl_naie | mcntrl_drmie), I2C_REG_CTL(alg_data));
- /* Stop timer. */ - del_timer_sync(&alg_data->mif.timer); dev_dbg(&alg_data->adapter.dev, "%s(): Waking up xfer routine after zero-xfer.\n", __func__); @@ -364,8 +340,6 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data) mcntrl_drmie | mcntrl_daie); iowrite32(ctl, I2C_REG_CTL(alg_data));
- /* Kill timer. */ - del_timer_sync(&alg_data->mif.timer); complete(&alg_data->mif.complete); } } @@ -400,8 +374,6 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id) mcntrl_drmie); iowrite32(ctl, I2C_REG_CTL(alg_data));
- /* Stop timer, to prevent timeout. */ - del_timer_sync(&alg_data->mif.timer); complete(&alg_data->mif.complete); } else if (stat & mstatus_nai) { /* Slave did not acknowledge, generate a STOP */ @@ -419,8 +391,6 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id) /* Our return value. */ alg_data->mif.ret = -EIO;
- /* Stop timer, to prevent timeout. */ - del_timer_sync(&alg_data->mif.timer); complete(&alg_data->mif.complete); } else { /* @@ -453,9 +423,8 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id) return IRQ_HANDLED; }
-static void i2c_pnx_timeout(struct timer_list *t) +static void i2c_pnx_timeout(struct i2c_pnx_algo_data *alg_data) { - struct i2c_pnx_algo_data *alg_data = from_timer(alg_data, t, mif.timer); u32 ctl;
dev_err(&alg_data->adapter.dev, @@ -472,7 +441,6 @@ static void i2c_pnx_timeout(struct timer_list *t) iowrite32(ctl, I2C_REG_CTL(alg_data)); wait_reset(alg_data); alg_data->mif.ret = -EIO; - complete(&alg_data->mif.complete); }
static inline void bus_reset_if_active(struct i2c_pnx_algo_data *alg_data) @@ -514,6 +482,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) struct i2c_msg *pmsg; int rc = 0, completed = 0, i; struct i2c_pnx_algo_data *alg_data = adap->algo_data; + unsigned long time_left; u32 stat;
dev_dbg(&alg_data->adapter.dev, @@ -548,7 +517,6 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) dev_dbg(&alg_data->adapter.dev, "%s(): mode %d, %d bytes\n", __func__, alg_data->mif.mode, alg_data->mif.len);
- i2c_pnx_arm_timer(alg_data);
/* initialize the completion var */ init_completion(&alg_data->mif.complete); @@ -564,7 +532,10 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) break;
/* Wait for completion */ - wait_for_completion(&alg_data->mif.complete); + time_left = wait_for_completion_timeout(&alg_data->mif.complete, + alg_data->timeout); + if (time_left == 0) + i2c_pnx_timeout(alg_data);
if (!(rc = alg_data->mif.ret)) completed++; @@ -657,7 +628,10 @@ static int i2c_pnx_probe(struct platform_device *pdev) alg_data->adapter.algo_data = alg_data; alg_data->adapter.nr = pdev->id;
- alg_data->timeout = I2C_PNX_TIMEOUT_DEFAULT; + alg_data->timeout = msecs_to_jiffies(I2C_PNX_TIMEOUT_DEFAULT); + if (alg_data->timeout <= 1) + alg_data->timeout = 2; + #ifdef CONFIG_OF alg_data->adapter.dev.of_node = of_node_get(pdev->dev.of_node); if (pdev->dev.of_node) { @@ -677,8 +651,6 @@ static int i2c_pnx_probe(struct platform_device *pdev) if (IS_ERR(alg_data->clk)) return PTR_ERR(alg_data->clk);
- timer_setup(&alg_data->mif.timer, i2c_pnx_timeout, 0); - snprintf(alg_data->adapter.name, sizeof(alg_data->adapter.name), "%s", pdev->name);
反馈: 您发送到kernel@openeuler.org的补丁/补丁集,已成功转换为PR! PR链接地址: https://gitee.com/openeuler/kernel/pulls/11141 邮件列表地址:https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/Y...
FeedBack: The patch(es) which you have sent to kernel@openeuler.org mailing list has been converted to a pull request successfully! Pull request link: https://gitee.com/openeuler/kernel/pulls/11141 Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/Y...