This series enables perf branch stack sampling support on arm64 platform via a new arch feature called Branch Record Buffer Extension (BRBE). All the relevant register definitions could be accessed here.
https://developer.arm.com/documentation/ddi0601/2021-12/AArch64-Registers
This series applies on 6.10-rc3.
Also this series is being hosted below for quick access, review and test.
https://git.gitlab.arm.com/linux-arm/linux-anshuman.git (brbe_v18)
- Anshuman
========== Perf Branch Stack Sampling Support (arm64 platforms) ===========
Currently arm64 platform does not support perf branch stack sampling. Hence any event requesting for branch stack records i.e PERF_SAMPLE_BRANCH_STACK marked in event->attr.sample_type, will be rejected in armpmu_event_init().
static int armpmu_event_init(struct perf_event *event) { ........ /* does not support taken branch sampling */ if (has_branch_stack(event)) return -EOPNOTSUPP; ........ }
$perf record -j any,u,k ls Error: cycles:P: PMU Hardware or event type doesn't support branch stack sampling.
-------------------- CONFIG_ARM64_BRBE and FEAT_BRBE ----------------------
After this series, perf branch stack sampling feature gets enabled on arm64 platforms where FEAT_BRBE HW feature is supported, and CONFIG_ARM64_BRBE is also selected during build. Let's observe all all possible scenarios here.
1. Feature not built (!CONFIG_ARM64_BRBE):
Falls back to the current behaviour i.e event gets rejected.
2. Feature built but HW not supported (CONFIG_ARM64_BRBE && !FEAT_BRBE):
Falls back to the current behaviour i.e event gets rejected.
3. Feature built and HW supported (CONFIG_ARM64_BRBE && FEAT_BRBE):
Platform supports branch stack sampling requests. Let's observe through a simple example here.
$perf record -j any_call,u,k,save_type ls
[Please refer perf-record man pages for all possible branch filter options]
$perf report -------------------------- Snip ---------------------- # Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycles # ........ ....... .................... ............................................ ............................................ .................. # 3.52% ls [kernel.kallsyms] [k] sched_clock_noinstr [k] arch_counter_get_cntpct 16 3.52% ls [kernel.kallsyms] [k] sched_clock [k] sched_clock_noinstr 9 1.85% ls [kernel.kallsyms] [k] sched_clock_cpu [k] sched_clock 5 1.80% ls [kernel.kallsyms] [k] irqtime_account_irq [k] sched_clock_cpu 20 1.58% ls [kernel.kallsyms] [k] gic_handle_irq [k] generic_handle_domain_irq 19 1.58% ls [kernel.kallsyms] [k] call_on_irq_stack [k] gic_handle_irq 9 1.58% ls [kernel.kallsyms] [k] do_interrupt_handler [k] call_on_irq_stack 23 1.58% ls [kernel.kallsyms] [k] generic_handle_domain_irq [k] __irq_resolve_mapping 6 1.58% ls [kernel.kallsyms] [k] __irq_resolve_mapping [k] __rcu_read_lock 10 -------------------------- Snip ----------------------
$perf report -D | grep cycles -------------------------- Snip ---------------------- ..... 1: ffff800080dd3334 -> ffff800080dd759c 39 cycles P 0 IND_CALL ..... 2: ffff800080ffaea0 -> ffff800080ffb688 16 cycles P 0 IND_CALL ..... 3: ffff800080139918 -> ffff800080ffae64 9 cycles P 0 CALL ..... 4: ffff800080dd3324 -> ffff8000801398f8 7 cycles P 0 CALL ..... 5: ffff8000800f8548 -> ffff800080dd330c 21 cycles P 0 IND_CALL ..... 6: ffff8000800f864c -> ffff8000800f84ec 6 cycles P 0 CALL ..... 7: ffff8000800f86dc -> ffff8000800f8638 11 cycles P 0 CALL ..... 8: ffff8000800f86d4 -> ffff800081008630 16 cycles P 0 CALL -------------------------- Snip ----------------------
perf script and other tooling can also be applied on the captured perf.data Similarly branch stack sampling records can be collected via direct system call i.e perf_event_open() method after setting 'struct perf_event_attr' as required.
event->attr.sample_type |= PERF_SAMPLE_BRANCH_STACK event->attr.branch_sample_type |= PERF_SAMPLE_BRANCH_<FILTER_1> | PERF_SAMPLE_BRANCH_<FILTER_2> | PERF_SAMPLE_BRANCH_<FILTER_3> | ...............................
But all branch filters might not be supported on the platform.
----------------------- BRBE Branch Filters Support -----------------------
- Following branch filters are supported on arm64.
PERF_SAMPLE_BRANCH_USER /* Branch privilege filters */ PERF_SAMPLE_BRANCH_KERNEL PERF_SAMPLE_BRANCH_HV
PERF_SAMPLE_BRANCH_ANY /* Branch type filters */ PERF_SAMPLE_BRANCH_ANY_CALL PERF_SAMPLE_BRANCH_ANY_RETURN PERF_SAMPLE_BRANCH_IND_CALL PERF_SAMPLE_BRANCH_COND PERF_SAMPLE_BRANCH_IND_JUMP PERF_SAMPLE_BRANCH_CALL
PERF_SAMPLE_BRANCH_NO_FLAGS /* Branch record flags */ PERF_SAMPLE_BRANCH_NO_CYCLES PERF_SAMPLE_BRANCH_TYPE_SAVE PERF_SAMPLE_BRANCH_HW_INDEX PERF_SAMPLE_BRANCH_PRIV_SAVE
- Following branch filters are not supported on arm64.
PERF_SAMPLE_BRANCH_ABORT_TX PERF_SAMPLE_BRANCH_IN_TX PERF_SAMPLE_BRANCH_NO_TX PERF_SAMPLE_BRANCH_CALL_STACK
Events requesting above non-supported branch filters get rejected.
--------------------------- Virtualisation support ------------------------
- No guest support
-------------------------------- Testing ---------------------------------
- Cross compiled for both arm64 and arm32 platforms - Passes all branch tests with 'perf test branch' on arm64
Changes in V18:
- Changed BRBIDR0_EL1 register fields CC and FORMAT, updated the commit message - Replaced BRBIDR0_EL1_FORMAT_0 as BRBIDR0_EL1_FORMAT_FORMAT_0 in BRBE driver - Dropped ifdef CONFIG_ARM64_BRBE around __init_el2_brbe() - Updated in code comment around __init_el2_brbe() - Dropped the write up for EL2->EL1 transition, also moved up the EL3 write up - Unconditionally capture branch record type and privilege information - Scan valid branch stack events in armpmu_start() to create merged filter - Dropped branch_sample_type override in armv8pmu_branch_stack_add() - Dropped branch filter mismatch between PMU and event in read_branch_records() - Added SW filtering framework in read_branch_records() during filter mismatch - Added SW filtering for privilege modes - Used host_data_ptr() to access host_debug_state.brbcr_el1 register - Changed DEBUG_STATE_SAVE_BRBE to use BIT(7) - Reverted back iflags as u8
https://lore.kernel.org/all/20240405024639.1179064-1-anshuman.khandual@arm.c...
Changes in V17:
- Added back Reviewed-by tags from Mark Brown - Updated the commit message regarding the field BRBINFx_EL1_TYPE_IMPDEF_TRAP_EL3 - Added leading 0s for all values as BRBIDR0_EL1.NUMREC is a 8 bit field - Added leading 0s for all values as BRBFCR_EL1.BANK is a 2 bit field - Reordered BRBCR_EL1/BRBCR_EL12/BRBCR_EL2 registers as per sysreg encodings - Renamed s/FIRST/BANK_0 and s/SECOND/BANK_1 in BRBFCR_EL1.BANK - Renamed s/UNCOND_DIRECT/DIRECT_UNCOND in BRBINFx_EL1.TYPE - Renamed s/COND_DIRECT/DIRECT_COND in BRBINFx_EL1.TYPE - Dropped __SYS_BRBINF/__SYS_BRBSRC/__SYS_BRBTGT and their expansions - Moved all existing BRBE registers from sysreg.h header to tools/sysreg format - Updated the commit message including about sys_insn_descs[] - Changed KVM to use existing SYS_BRBSRC/TGT/INF_EL1(n) format - Moved the BRBE instructions into sys_insn_descs[] array - ARM PMUV3 changes have been moved into the BRBE driver patch instead - Moved down branch_stack_add() in armpmu_add() after event's basic checks - Added new callbacks in struct arm_pmu e.g branch_stack_[init|add|del]() - Renamed struct arm_pmu callback branch_reset() as branch_stack_reset() - Dropped the comment in armpmu_event_init() - Renamed 'pmu_hw_events' elements from 'brbe_' to more generic 'branch_' - Separated out from the BRBE driver implementation patch - Dropped the comment in __init_el2_brbe() - Updated __init_el2_brbe() with BRBCR_EL2.MPRED requirements - Updated __init_el2_brbe() with __check_hvhe() constructs - Updated booting.rst regarding MPRED, MDCR_EL3 and fine grained control - Dropped Documentation/arch/arm64/brbe.rst - Renamed armv8pmu_branch_reset() as armv8pmu_branch_stack_reset() - Separated out booting.rst and EL2 boot requirements into a new patch - Dropped process_branch_aborts() completely - Added an warning if transaction states get detected unexpectedly - Dropped enum brbe_bank_idx from the driver - Defined armv8pmu_branch_stack_init/add/del() callbacks in the driver - Changed BRBE driver to use existing SYS_BRBSRC/TGT/INF_EL1(n) format - Dropped isb() call sites in __debug_[save|restore]_brbe() - Changed to [read|write]_sysreg_el1() accessors in __debug_[save|restore]_brbe()
Changes in V16
https://lore.kernel.org/all/20240125094119.2542332-1-anshuman.khandual@arm.c...
- Updated BRBINFx_EL1.TYPE = 0b110000 as field IMPDEF_TRAP_EL3 - Updated BRBCR_ELx[9] as field FZPSS - Updated BRBINFINJ_EL1 to use sysreg field BRBINFx_EL1 - Added BRB_INF_SRC_TGT_EL1 macro for corresponding BRB_[INF|SRC|TGT] expansion - Renamed arm_brbe.h as arm_pmuv3_branch.h - Updated perf_sample_save_brstack()'s new argument requirements with NULL - Fixed typo (s/informations/information) in Documentation/arch/arm64/brbe.rst - Added SPDX-License-Identifier in Documentation/arch/arm64/brbe.rst - Added new PERF_SAMPLE_BRANCH_COUNTERS into BRBE_EXCLUDE_BRANCH_FILTERS - Dropped BRBFCR_EL1 and BRBCR_EL1 from enum vcpu_sysreg - Reverted back the KVM NVHE patch - use host_debug_state based 'brbcr_el1' element and dropped the previous dependency on Jame's coresight series
Changes in V15:
https://lore.kernel.org/all/20231201053906.1261704-1-anshuman.khandual@arm.c...
- Added a comment for armv8pmu_branch_probe() regarding single cpu probe - Added a text in brbe.rst regarding single cpu probe - Dropped runtime BRBE enable for setting DEBUG_STATE_SAVE_BRBE - Dropped zero_branch_stack based zero branch records mechanism - Replaced BRBFCR_EL1_DEFAULT_CONFIG with BRBFCR_EL1_CONFIG_MASK - Added BRBFCR_EL1_CONFIG_MASK masking in branch_type_to_brbfcr() - Moved BRBE helpers from arm_brbe.h into arm_brbe.c - Moved armv8_pmu_xxx() declaration inside arm_brbe.h for arm64 (CONFIG_ARM64_BRBE) - Moved armv8_pmu_xxx() stub definitions inside arm_brbe.h for arm32 (!CONFIG_ARM64_BRBE) - Included arm_brbe.h header both in arm_pmuv3.c and arm_brbe.c - Dropped BRBE custom pr_fmt() - Dropped CONFIG_PERF_EVENTS wrapping from header entries - Flush branch records when a cpu bound event follows a task bound event - Dropped BRBFCR_EL1 from __debug_save_brbe()/__debug_restore_brbe() - Always save the live SYS_BRBCR_EL1 in host context and then check if BRBE was enabled before resetting SYS_BRBCR_EL1 for the host
Changes in V14:
https://lore.kernel.org/all/20231114051329.327572-1-anshuman.khandual@arm.co...
- This series has been reorganised as suggested during V13 - There are just eight patches now i.e 5 enablement and 3 perf branch tests
- Fixed brackets problem in __SYS_BRBINFO/BRBSRC/BRBTGT() macros - Renamed the macro i.e s/__SYS_BRBINFO/__SYS_BRBINF/ - Renamed s/BRB_IALL/BRB_IALL_INSN and s/BRBE_INJ/BRB_INJ_INSN - Moved BRB_IALL_INSN and SYS_BRB_INSN instructions to sysreg patch - Changed E1BRE as ExBRE in sysreg fields inside BRBCR_ELx - Used BRBCR_ELx for defining all BRBCR_EL1, BRBCR_EL2, and BRBCR_EL12 (new)
- Folded the following three patches into a single patch i.e [PATCH 3/8]
drivers: perf: arm_pmu: Add new sched_task() callback arm64/perf: Add branch stack support in struct arm_pmu arm64/perf: Add branch stack support in struct pmu_hw_events arm64/perf: Add branch stack support in ARMV8 PMU arm64/perf: Add PERF_ATTACH_TASK_DATA to events with has_branch_stack()
- All armv8pmu_branch_xxxx() stub definitions have been moved inside include/linux/perf/arm_pmuv3.h for easy access from both arm32 and arm64 - Added brbe_users, brbe_context and brbe_sample_type in struct pmu_hw_events - Added comments for all the above new elements in struct pmu_hw_events - Added branch_reset() and sched_task() callbacks - Changed and optimized branch records processing during a PMU IRQ - NO branch records get captured for event with mismatched brbe_sample_type - Branch record context is tracked from armpmu_del() & armpmu_add() - Branch record hardware is driven from armv8pmu_start() & armv8pmu_stop() - Dropped NULL check for 'pmu_ctx' inside armv8pmu_sched_task() - Moved down PERF_ATTACH_TASK_DATA assignment with a preceding comment - In conflicting branch sample type requests, first event takes precedence
- Folded the following five patches from V13 into a single patch i.e [PATCH 4/8]
arm64/perf: Enable branch stack events via FEAT_BRBE arm64/perf: Add struct brbe_regset helper functions arm64/perf: Implement branch records save on task sched out arm64/perf: Implement branch records save on PMU IRQ
- Fixed the year in copyright statement - Added Documentation/arch/arm64/brbe.rst - Updated Documentation/arch/arm64/booting.rst (BRBCR_EL2.CC for EL1 entry) - Added __init_el2_brbe() which enables branch record cycle count support - Disabled EL2 traps in __init_el2_fgt() while accessing BRBE registers and executing instructions - Changed CONFIG_ARM64_BRBE user visible description - Fixed a typo in CONFIG_ARM64_BRBE config option description text - Added BUILD_BUG_ON() co-relating BRBE_BANK_MAX_ENTRIES and MAX_BRANCH_RECORDS - Dropped arm64_create_brbe_task_ctx_kmem_cache() - Moved down comment for PERF_SAMPLE_BRANCH_KERNEL in branch_type_to_brbcr() - Renamed BRBCR_ELx_DEFAULT_CONFIG as BRBCR_ELx_CONFIG_MASK - Replaced BRBCR_ELx_DEFAULT_TS with BRBCR_ELx_TS_MASK in BRBCR_ELx_CONFIG_MASK - Replaced BRBCR_ELx_E1BRE instances with BRBCR_ELx_ExBRE
- Added BRBE specific branch stack sampling perf test patches into the series - Added a patch to prevent guest accesses into BRBE registers and instructions - Added a patch to save the BRBE host context in NVHE environment - Updated most commit messages
Changes in V13:
https://lore.kernel.org/all/20230711082455.215983-1-anshuman.khandual@arm.co... https://lore.kernel.org/all/20230622065351.1092893-1-anshuman.khandual@arm.c...
- Added branch callback stubs for aarch32 pmuv3 based platforms - Updated the comments for capture_brbe_regset() - Deleted the comments in __read_brbe_regset() - Reversed the arguments order in capture_brbe_regset() and brbe_branch_save() - Fixed BRBE_BANK[0|1]_IDX_MAX indices comparison in armv8pmu_branch_read() - Fixed BRBE_BANK[0|1]_IDX_MAX indices comparison in capture_brbe_regset()
Changes in V12:
https://lore.kernel.org/all/20230615133239.442736-1-anshuman.khandual@arm.co...
- Replaced branch types with complete DIRECT/INDIRECT prefixes/suffixes - Replaced branch types with complete INSN/ALIGN prefixes/suffixes - Replaced return branch types as simple RET/ERET - Replaced time field GST_PHYSICAL as GUEST_PHYSICAL - Added 0 padding for BRBIDR0_EL1.NUMREC enum values - Dropped helper arm_pmu_branch_stack_supported() - Renamed armv8pmu_branch_valid() as armv8pmu_branch_attr_valid() - Separated perf_task_ctx_cache setup from arm_pmu private allocation - Collected changes to branch_records_alloc() in a single patch [5/10] - Reworked and cleaned up branch_records_alloc() - Reworked armv8pmu_branch_read() with new loop iterations in patch [6/10] - Reworked capture_brbe_regset() with new loop iterations in patch [8/10] - Updated the comment in branch_type_to_brbcr() - Fixed the comment before stitch_stored_live_entries() - Fixed BRBINFINJ_EL1 definition for VALID_FULL enum field - Factored out helper __read_brbe_regset() from capture_brbe_regset() - Dropped the helper copy_brbe_regset() - Simplified stitch_stored_live_entries() with memcpy(), memmove() - Reworked armv8pmu_probe_pmu() to bail out early with !probe.present - Rework brbe_attributes_probe() without 'struct brbe_hw_attr' - Dropped 'struct brbe_hw_attr' argument from capture_brbe_regset() - Dropped 'struct brbe_hw_attr' argument from brbe_branch_save() - Dropped arm_pmu->private and added arm_pmu->reg_trbidr instead
Changes in V11:
https://lore.kernel.org/all/20230531040428.501523-1-anshuman.khandual@arm.co...
- Fixed the crash for per-cpu events without event->pmu_ctx->task_ctx_data
Changes in V10:
https://lore.kernel.org/all/20230517022410.722287-1-anshuman.khandual@arm.co...
- Rebased the series on v6.4-rc2 - Moved ARMV8 PMUV3 changes inside drivers/perf/arm_pmuv3.c - Moved BRBE driver changes inside drivers/perf/arm_brbe.[c|h] - Moved the WARN_ON() inside the if condition in armv8pmu_handle_irq()
Changes in V9:
https://lore.kernel.org/all/20230315051444.1683170-1-anshuman.khandual@arm.c...
- Fixed build problem with has_branch_stack() in arm64 header - BRBINF_EL1 definition has been changed from 'Sysreg' to 'SysregFields' - Renamed all BRBINF_EL1 call sites as BRBINFx_EL1 - Dropped static const char branch_filter_error_msg[] - Implemented a positive list check for BRBE supported perf branch filters - Added a comment in armv8pmu_handle_irq() - Implemented per-cpu allocation for struct branch_record records - Skipped looping through bank 1 if an invalid record is detected in bank 0 - Added comment in armv8pmu_branch_read() explaining prohibited region etc - Added comment warning about erroneously marking transactions as aborted - Replaced the first argument (perf_branch_entry) in capture_brbe_flags() - Dropped the last argument (idx) in capture_brbe_flags() - Dropped the brbcr argument from capture_brbe_flags() - Used perf_sample_save_brstack() to capture branch records for perf_sample_data - Added comment explaining rationale for setting BRBCR_EL1_FZP for user only traces - Dropped BRBE prohibited state mechanism while in armv8pmu_branch_read() - Implemented event task context based branch records save mechanism
Changes in V8:
https://lore.kernel.org/all/20230123125956.1350336-1-anshuman.khandual@arm.c...
- Replaced arm_pmu->features as arm_pmu->has_branch_stack, updated its helper - Added a comment and line break before arm_pmu->private element - Added WARN_ON_ONCE() in helpers i.e armv8pmu_branch_[read|valid|enable|disable]() - Dropped comments in armv8pmu_enable_event() and armv8pmu_disable_event() - Replaced open bank encoding in BRBFCR_EL1 with SYS_FIELD_PREP() - Changed brbe_hw_attr->brbe_version from 'bool' to 'int' - Updated pr_warn() as pr_warn_once() with values in brbe_get_perf_[type|priv]() - Replaced all pr_warn_once() as pr_debug_once() in armv8pmu_branch_valid() - Added a comment in branch_type_to_brbcr() for the BRBCR_EL1 privilege settings - Modified the comment related to BRBINFx_EL1.LASTFAILED in capture_brbe_flags() - Modified brbe_get_perf_entry_type() as brbe_set_perf_entry_type() - Renamed brbe_valid() as brbe_record_is_complete() - Renamed brbe_source() as brbe_record_is_source_only() - Renamed brbe_target() as brbe_record_is_target_only() - Inverted checks for !brbe_record_is_[target|source]_only() for info capture - Replaced 'fetch' with 'get' in all helpers that extract field value - Dropped 'static int brbe_current_bank' optimization in select_brbe_bank() - Dropped select_brbe_bank_index() completely, added capture_branch_entry() - Process captured branch entries in two separate loops one for each BRBE bank - Moved branch_records_alloc() inside armv8pmu_probe_pmu() - Added a forward declaration for the helper has_branch_stack() - Added new callbacks armv8pmu_private_alloc() and armv8pmu_private_free() - Updated armv8pmu_probe_pmu() to allocate the private structure before SMP call
Changes in V7:
https://lore.kernel.org/all/20230105031039.207972-1-anshuman.khandual@arm.co...
- Folded [PATCH 7/7] into [PATCH 3/7] which enables branch stack sampling event - Defined BRBFCR_EL1_BRANCH_FILTERS, BRBCR_EL1_DEFAULT_CONFIG in the header - Defined BRBFCR_EL1_DEFAULT_CONFIG in the header - Updated BRBCR_EL1_DEFAULT_CONFIG with BRBCR_EL1_FZP - Defined BRBCR_EL1_DEFAULT_TS in the header - Updated BRBCR_EL1_DEFAULT_CONFIG with BRBCR_EL1_DEFAULT_TS - Moved BRBCR_EL1_DEFAULT_CONFIG check inside branch_type_to_brbcr() - Moved down BRBCR_EL1_CC, BRBCR_EL1_MPRED later in branch_type_to_brbcr() - Also set BRBE in paused state in armv8pmu_branch_disable() - Dropped brbe_paused(), set_brbe_paused() helpers - Extracted error string via branch_filter_error_msg[] for armv8pmu_branch_valid() - Replaced brbe_v1p1 with brbe_version in struct brbe_hw_attr - Added valid_brbe_[cc, format, version]() helpers - Split a separate brbe_attributes_probe() from armv8pmu_branch_probe() - Capture event->attr.branch_sample_type earlier in armv8pmu_branch_valid() - Defined enum brbe_bank_idx with possible values for BRBE bank indices - Changed armpmu->hw_attr into armpmu->private - Added missing space in stub definition for armv8pmu_branch_valid() - Replaced both kmalloc() with kzalloc() - Added BRBE_BANK_MAX_ENTRIES - Updated comment for capture_brbe_flags() - Updated comment for struct brbe_hw_attr - Dropped space after type cast in couple of places - Replaced inverse with negation for testing BRBCR_EL1_FZP in armv8pmu_branch_read() - Captured cpuc->branches->branch_entries[idx] in a local variable - Dropped saved_priv from armv8pmu_branch_read() - Reorganize PERF_SAMPLE_BRANCH_NO_[CYCLES|NO_FLAGS] related configuration - Replaced with FIELD_GET() and FIELD_PREP() wherever applicable - Replaced BRBCR_EL1_TS_PHYSICAL with BRBCR_EL1_TS_VIRTUAL - Moved valid_brbe_nr(), valid_brbe_cc(), valid_brbe_format(), valid_brbe_version() select_brbe_bank(), select_brbe_bank_index() helpers inside the C implementation - Reorganized brbe_valid_nr() and dropped the pr_warn() message - Changed probe sequence in brbe_attributes_probe() - Added 'brbcr' argument into capture_brbe_flags() to ascertain correct state - Disable BRBE before disabling the PMU event counter - Enable PERF_SAMPLE_BRANCH_HV filters when is_kernel_in_hyp_mode() - Guard armv8pmu_reset() & armv8pmu_sched_task() with arm_pmu_branch_stack_supported()
Changes in V6:
https://lore.kernel.org/linux-arm-kernel/20221208084402.863310-1-anshuman.kh...
- Restore the exception level privilege after reading the branch records - Unpause the buffer after reading the branch records - Decouple BRBCR_EL1_EXCEPTION/ERTN from perf event privilege level - Reworked BRBE implementation and branch stack sampling support on arm pmu - BRBE implementation is now part of overall ARMV8 PMU implementation - BRBE implementation moved from drivers/perf/ to inside arch/arm64/kernel/ - CONFIG_ARM_BRBE_PMU renamed as CONFIG_ARM64_BRBE in arch/arm64/Kconfig - File moved - drivers/perf/arm_pmu_brbe.c -> arch/arm64/kernel/brbe.c - File moved - drivers/perf/arm_pmu_brbe.h -> arch/arm64/kernel/brbe.h - BRBE name has been dropped from struct arm_pmu and struct hw_pmu_events - BRBE name has been abstracted out as 'branches' in arm_pmu and hw_pmu_events - BRBE name has been abstracted out as 'branches' in ARMV8 PMU implementation - Added sched_task() callback into struct arm_pmu - Added 'hw_attr' into struct arm_pmu encapsulating possible PMU HW attributes - Dropped explicit attributes brbe_(v1p1, nr, cc, format) from struct arm_pmu - Dropped brbfcr, brbcr, registers scratch area from struct hw_pmu_events - Dropped brbe_users, brbe_context tracking in struct hw_pmu_events - Added 'features' tracking into struct arm_pmu with ARM_PMU_BRANCH_STACK flag - armpmu->hw_attr maps into 'struct brbe_hw_attr' inside BRBE implementation - Set ARM_PMU_BRANCH_STACK in 'arm_pmu->features' after successful BRBE probe - Added armv8pmu_branch_reset() inside armv8pmu_branch_enable() - Dropped brbe_supported() as events will be rejected via ARM_PMU_BRANCH_STACK - Dropped set_brbe_disabled() as well - Reformated armv8pmu_branch_valid() warnings while rejecting unsupported events
Changes in V5:
https://lore.kernel.org/linux-arm-kernel/20221107062514.2851047-1-anshuman.k...
- Changed BRBCR_EL1.VIRTUAL from 0b1 to 0b01 - Changed BRBFCR_EL1.EnL into BRBFCR_EL1.EnI - Changed config ARM_BRBE_PMU from 'tristate' to 'bool'
Changes in V4:
https://lore.kernel.org/all/20221017055713.451092-1-anshuman.khandual@arm.co...
- Changed ../tools/sysreg declarations as suggested - Set PERF_SAMPLE_BRANCH_STACK in data.sample_flags - Dropped perfmon_capable() check in armpmu_event_init() - s/pr_warn_once/pr_info in armpmu_event_init() - Added brbe_format element into struct pmu_hw_events - Changed v1p1 as brbe_v1p1 in struct pmu_hw_events - Dropped pr_info() from arm64_pmu_brbe_probe(), solved LOCKDEP warning
Changes in V3:
https://lore.kernel.org/all/20220929075857.158358-1-anshuman.khandual@arm.co...
- Moved brbe_stack from the stack and now dynamically allocated - Return PERF_BR_PRIV_UNKNOWN instead of -1 in brbe_fetch_perf_priv() - Moved BRBIDR0, BRBCR, BRBFCR registers and fields into tools/sysreg - Created dummy BRBINF_EL1 field definitions in tools/sysreg - Dropped ARMPMU_EVT_PRIV framework which cached perfmon_capable() - Both exception and exception return branche records are now captured only if the event has PERF_SAMPLE_BRANCH_KERNEL which would already been checked in generic perf via perf_allow_kernel()
Changes in V2:
https://lore.kernel.org/all/20220908051046.465307-1-anshuman.khandual@arm.co...
- Dropped branch sample filter helpers consolidation patch from this series - Added new hw_perf_event.flags element ARMPMU_EVT_PRIV to cache perfmon_capable() - Use cached perfmon_capable() while configuring BRBE branch record filters
Changes in V1:
https://lore.kernel.org/linux-arm-kernel/20220613100119.684673-1-anshuman.kh...
- Added CONFIG_PERF_EVENTS wrapper for all branch sample filter helpers - Process new perf branch types via PERF_BR_EXTEND_ABI
Changes in RFC V2:
https://lore.kernel.org/linux-arm-kernel/20220412115455.293119-1-anshuman.kh...
- Added branch_sample_priv() while consolidating other branch sample filter helpers - Changed all SYS_BRBXXXN_EL1 register definition encodings per Marc - Changed the BRBE driver as per proposed BRBE related perf ABI changes (V5) - Added documentation for struct arm_pmu changes, updated commit message - Updated commit message for BRBE detection infrastructure patch - PERF_SAMPLE_BRANCH_KERNEL gets checked during arm event init (outside the driver) - Branch privilege state capture mechanism has now moved inside the driver
Changes in RFC V1:
https://lore.kernel.org/all/1642998653-21377-1-git-send-email-anshuman.khand...
Anshuman Khandual (6): arm64/sysreg: Add BRBE registers and fields KVM: arm64: Explicitly handle BRBE traps as UNDEFINED drivers: perf: arm_pmu: Add infrastructure for branch stack sampling arm64/boot: Enable EL2 requirements for BRBE drivers: perf: arm_pmuv3: Enable branch stack sampling via FEAT_BRBE KVM: arm64: nvhe: Disable branch generation in nVHE guests
James Clark (3): perf: test: Speed up running brstack test on an Arm model perf: test: Remove empty lines from branch filter test output perf: test: Extend branch stack sampling test for Arm64 BRBE
Junhao He (1): arm64/perf: Enable branch stack sampling
Marc Zyngier (2): KVM: arm64: nv: Drop VCPU_HYP_CONTEXT flag KVM: arm64: Fix TRFCR_EL1/PMSCR_EL1 access in hVHE mode
Miguel Luis (2): arm64: Add missing _EL12 encodings arm64: Add missing _EL2 encodings
Documentation/arch/arm64/booting.rst | 21 + arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/include/asm/el2_setup.h | 87 +- arch/arm64/include/asm/kvm_host.h | 5 +- arch/arm64/include/asm/sysreg.h | 55 +- arch/arm64/kvm/debug.c | 5 + arch/arm64/kvm/hyp/nvhe/debug-sr.c | 43 +- arch/arm64/kvm/hyp/vhe/switch.c | 7 +- arch/arm64/kvm/sys_regs.c | 56 ++ arch/arm64/tools/sysreg | 131 +++ drivers/perf/Kconfig | 11 + drivers/perf/Makefile | 1 + drivers/perf/arm_brbe.c | 1198 ++++++++++++++++++++++++ drivers/perf/arm_pmu.c | 42 +- drivers/perf/arm_pmuv3.c | 160 +++- drivers/perf/arm_pmuv3_branch.h | 83 ++ include/linux/perf/arm_pmu.h | 37 +- tools/perf/tests/builtin-test.c | 1 + tools/perf/tests/shell/test_brstack.sh | 57 +- tools/perf/tests/tests.h | 1 + tools/perf/tests/workloads/Build | 2 + tools/perf/tests/workloads/traploop.c | 39 + 22 files changed, 2007 insertions(+), 36 deletions(-) create mode 100644 drivers/perf/arm_brbe.c create mode 100644 drivers/perf/arm_pmuv3_branch.h create mode 100644 tools/perf/tests/workloads/traploop.c
From: Marc Zyngier maz@kernel.org
mainline inclusion from mainline-v6.9-rc1 commit 6f57c6be2a0889cc0fd32b0cd2eb25dfee20dde3 category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8EC9K CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
It has become obvious that HCR_EL2.NV serves the exact same use as VCPU_HYP_CONTEXT, only in an architectural way. So just drop the flag for good.
Reviewed-by: Joey Gouly joey.gouly@arm.com Reviewed-by: Oliver Upton oliver.upton@linux.dev Link: https://lore.kernel.org/r/20240419102935.1935571-5-maz@kernel.org Signed-off-by: Marc Zyngier maz@kernel.org Signed-off-by: Junhao He hejunhao3@huawei.com --- arch/arm64/include/asm/kvm_host.h | 2 -- arch/arm64/kvm/hyp/vhe/switch.c | 7 +------ 2 files changed, 1 insertion(+), 8 deletions(-)
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index ac8115098ec9..a4a21911a78a 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -755,8 +755,6 @@ struct kvm_vcpu_arch { #define DEBUG_STATE_SAVE_SPE __vcpu_single_flag(iflags, BIT(5)) /* Save TRBE context if active */ #define DEBUG_STATE_SAVE_TRBE __vcpu_single_flag(iflags, BIT(6)) -/* vcpu running in HYP context */ -#define VCPU_HYP_CONTEXT __vcpu_single_flag(iflags, BIT(7))
/* SVE enabled for host EL0 */ #define HOST_SVE_ENABLED __vcpu_single_flag(sflags, BIT(0)) diff --git a/arch/arm64/kvm/hyp/vhe/switch.c b/arch/arm64/kvm/hyp/vhe/switch.c index 448b17080d36..def038487f2a 100644 --- a/arch/arm64/kvm/hyp/vhe/switch.c +++ b/arch/arm64/kvm/hyp/vhe/switch.c @@ -183,7 +183,7 @@ static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code) * If we were in HYP context on entry, adjust the PSTATE view * so that the usual helpers work correctly. */ - if (unlikely(vcpu_get_flag(vcpu, VCPU_HYP_CONTEXT))) { + if (vcpu_has_nv(vcpu) && (read_sysreg(hcr_el2) & HCR_NV)) { u64 mode = *vcpu_cpsr(vcpu) & (PSR_MODE_MASK | PSR_MODE32_BIT);
switch (mode) { @@ -232,11 +232,6 @@ static int __kvm_vcpu_run_vhe(struct kvm_vcpu *vcpu) sysreg_restore_guest_state_vhe(guest_ctxt); __debug_switch_to_guest(vcpu);
- if (is_hyp_ctxt(vcpu)) - vcpu_set_flag(vcpu, VCPU_HYP_CONTEXT); - else - vcpu_clear_flag(vcpu, VCPU_HYP_CONTEXT); - do { /* Jump in the fire! */ exit_code = __guest_enter(vcpu);
From: Miguel Luis miguel.luis@oracle.com
mainline inclusion from mainline-v6.6-rc1 commit d5cb781b77416a9ed4129960712932dbcf8a9f30 category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8EC9K CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
Some _EL12 encodings are missing. Add them.
Reviewed-by: Eric Auger eric.auger@redhat.com Signed-off-by: Miguel Luis miguel.luis@oracle.com Signed-off-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/20231023095444.1587322-2-maz@kernel.org Signed-off-by: Oliver Upton oliver.upton@linux.dev Signed-off-by: Junhao He hejunhao3@huawei.com --- arch/arm64/include/asm/sysreg.h | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 42358b8d678e..cef20e5d105d 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -578,20 +578,31 @@ #define SYS_CNTHCTL_EL2 sys_reg(3, 4, 14, 1, 0)
/* VHE encodings for architectural EL0/1 system registers */ +#define SYS_BRBCR_EL12 sys_reg(2, 5, 9, 0, 0) #define SYS_SCTLR_EL12 sys_reg(3, 5, 1, 0, 0) +#define SYS_CPACR_EL12 sys_reg(3, 5, 1, 0, 2) +#define SYS_SCTLR2_EL12 sys_reg(3, 5, 1, 0, 3) +#define SYS_ZCR_EL12 sys_reg(3, 5, 1, 2, 0) +#define SYS_TRFCR_EL12 sys_reg(3, 5, 1, 2, 1) +#define SYS_SMCR_EL12 sys_reg(3, 5, 1, 2, 6) #define SYS_TTBR0_EL12 sys_reg(3, 5, 2, 0, 0) #define SYS_TTBR1_EL12 sys_reg(3, 5, 2, 0, 1) #define SYS_TCR_EL12 sys_reg(3, 5, 2, 0, 2) +#define SYS_TCR2_EL12 sys_reg(3, 5, 2, 0, 3) #define SYS_SPSR_EL12 sys_reg(3, 5, 4, 0, 0) #define SYS_ELR_EL12 sys_reg(3, 5, 4, 0, 1) #define SYS_AFSR0_EL12 sys_reg(3, 5, 5, 1, 0) #define SYS_AFSR1_EL12 sys_reg(3, 5, 5, 1, 1) #define SYS_ESR_EL12 sys_reg(3, 5, 5, 2, 0) #define SYS_TFSR_EL12 sys_reg(3, 5, 5, 6, 0) +#define SYS_FAR_EL12 sys_reg(3, 5, 6, 0, 0) +#define SYS_PMSCR_EL12 sys_reg(3, 5, 9, 9, 0) #define SYS_MAIR_EL12 sys_reg(3, 5, 10, 2, 0) #define SYS_AMAIR_EL12 sys_reg(3, 5, 10, 3, 0) #define SYS_MPAM1_EL12 sys_reg(3, 5, 10, 5, 0) #define SYS_VBAR_EL12 sys_reg(3, 5, 12, 0, 0) +#define SYS_CONTEXTIDR_EL12 sys_reg(3, 5, 13, 0, 1) +#define SYS_SCXTNUM_EL12 sys_reg(3, 5, 13, 0, 7) #define SYS_CNTKCTL_EL12 sys_reg(3, 5, 14, 1, 0) #define SYS_CNTP_TVAL_EL02 sys_reg(3, 5, 14, 2, 0) #define SYS_CNTP_CTL_EL02 sys_reg(3, 5, 14, 2, 1)
From: Miguel Luis miguel.luis@oracle.com
mainline inclusion from mainline-v6.6-rc1 commit 41f6c9344713e6b895a77f2bdd596cf56d4cc197 category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8EC9K CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
Some _EL2 encodings are missing. Add them.
Signed-off-by: Miguel Luis miguel.luis@oracle.com Reviewed-by: Eric Auger eric.auger@redhat.com [maz: dropped secure encodings] Signed-off-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/20231023095444.1587322-3-maz@kernel.org Signed-off-by: Oliver Upton oliver.upton@linux.dev Signed-off-by: Junhao He hejunhao3@huawei.com --- arch/arm64/include/asm/sysreg.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index cef20e5d105d..5e036fb4a4bf 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -272,6 +272,8 @@ /* ETM */ #define SYS_TRCOSLAR sys_reg(2, 1, 1, 0, 4)
+#define SYS_BRBCR_EL2 sys_reg(2, 4, 9, 0, 0) + #define SYS_MIDR_EL1 sys_reg(3, 0, 0, 0, 0) #define SYS_MPIDR_EL1 sys_reg(3, 0, 0, 0, 5) #define SYS_REVIDR_EL1 sys_reg(3, 0, 0, 0, 6) @@ -488,6 +490,7 @@
#define SYS_SCTLR_EL2 sys_reg(3, 4, 1, 0, 0) #define SYS_ACTLR_EL2 sys_reg(3, 4, 1, 0, 1) +#define SYS_SCTLR2_EL2 sys_reg(3, 4, 1, 0, 3) #define SYS_HCR_EL2 sys_reg(3, 4, 1, 1, 0) #define SYS_MDCR_EL2 sys_reg(3, 4, 1, 1, 1) #define SYS_CPTR_EL2 sys_reg(3, 4, 1, 1, 2) @@ -501,6 +504,7 @@ #define SYS_VTCR_EL2 sys_reg(3, 4, 2, 1, 2)
#define SYS_TRFCR_EL2 sys_reg(3, 4, 1, 2, 1) +#define SYS_VNCR_EL2 sys_reg(3, 4, 2, 2, 0) #define SYS_HAFGRTR_EL2 sys_reg(3, 4, 3, 1, 6) #define SYS_SPSR_EL2 sys_reg(3, 4, 4, 0, 0) #define SYS_ELR_EL2 sys_reg(3, 4, 4, 0, 1) @@ -518,6 +522,18 @@
#define SYS_MAIR_EL2 sys_reg(3, 4, 10, 2, 0) #define SYS_AMAIR_EL2 sys_reg(3, 4, 10, 3, 0) +#define SYS_MPAMHCR_EL2 sys_reg(3, 4, 10, 4, 0) +#define SYS_MPAMVPMV_EL2 sys_reg(3, 4, 10, 4, 1) +#define SYS_MPAM2_EL2 sys_reg(3, 4, 10, 5, 0) +#define __SYS__MPAMVPMx_EL2(x) sys_reg(3, 4, 10, 6, x) +#define SYS_MPAMVPM0_EL2 __SYS__MPAMVPMx_EL2(0) +#define SYS_MPAMVPM1_EL2 __SYS__MPAMVPMx_EL2(1) +#define SYS_MPAMVPM2_EL2 __SYS__MPAMVPMx_EL2(2) +#define SYS_MPAMVPM3_EL2 __SYS__MPAMVPMx_EL2(3) +#define SYS_MPAMVPM4_EL2 __SYS__MPAMVPMx_EL2(4) +#define SYS_MPAMVPM5_EL2 __SYS__MPAMVPMx_EL2(5) +#define SYS_MPAMVPM6_EL2 __SYS__MPAMVPMx_EL2(6) +#define SYS_MPAMVPM7_EL2 __SYS__MPAMVPMx_EL2(7)
#define SYS_MPAMHCR_EL2 sys_reg(3, 4, 10, 4, 0) #define SYS_MPAMVPMV_EL2 sys_reg(3, 4, 10, 4, 1) @@ -573,9 +589,23 @@
#define SYS_CONTEXTIDR_EL2 sys_reg(3, 4, 13, 0, 1) #define SYS_TPIDR_EL2 sys_reg(3, 4, 13, 0, 2) +#define SYS_SCXTNUM_EL2 sys_reg(3, 4, 13, 0, 7) + +#define __AMEV_op2(m) (m & 0x7) +#define __AMEV_CRm(n, m) (n | ((m & 0x8) >> 3)) +#define __SYS__AMEVCNTVOFF0n_EL2(m) sys_reg(3, 4, 13, __AMEV_CRm(0x8, m), __AMEV_op2(m)) +#define SYS_AMEVCNTVOFF0n_EL2(m) __SYS__AMEVCNTVOFF0n_EL2(m) +#define __SYS__AMEVCNTVOFF1n_EL2(m) sys_reg(3, 4, 13, __AMEV_CRm(0xA, m), __AMEV_op2(m)) +#define SYS_AMEVCNTVOFF1n_EL2(m) __SYS__AMEVCNTVOFF1n_EL2(m)
#define SYS_CNTVOFF_EL2 sys_reg(3, 4, 14, 0, 3) #define SYS_CNTHCTL_EL2 sys_reg(3, 4, 14, 1, 0) +#define SYS_CNTHP_TVAL_EL2 sys_reg(3, 4, 14, 2, 0) +#define SYS_CNTHP_CTL_EL2 sys_reg(3, 4, 14, 2, 1) +#define SYS_CNTHP_CVAL_EL2 sys_reg(3, 4, 14, 2, 2) +#define SYS_CNTHV_TVAL_EL2 sys_reg(3, 4, 14, 3, 0) +#define SYS_CNTHV_CTL_EL2 sys_reg(3, 4, 14, 3, 1) +#define SYS_CNTHV_CVAL_EL2 sys_reg(3, 4, 14, 3, 2)
/* VHE encodings for architectural EL0/1 system registers */ #define SYS_BRBCR_EL12 sys_reg(2, 5, 9, 0, 0)
From: Marc Zyngier maz@kernel.org
mainline inclusion from mainline-v6.8-rc1 commit 9a3bfb27ef65ad41d994765c031ca18217afb058 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8EC9K CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
When running in hVHE mode, EL1 accesses are performed with the EL12 accessor, as we run with HCR_EL2.E2H=1.
Unfortunately, both PMSCR_EL1 and TRFCR_EL1 are used with the EL1 accessor, meaning that we actually affect the EL2 state. Duh.
Switch to using the {read,write}_sysreg_el1() helpers that will do the right thing in all circumstances.
Note that the 'Fixes:' tag doesn't represent the point where the bug was introduced (there is no such point), but the first practical point where the hVHE feature is usable.
Cc: James Clark james.clark@arm.com Cc: Anshuman Khandual anshuman.khandual@arm.com Fixes: 38cba55008e5 ("KVM: arm64: Force HCR_E2H in guest context when ARM64_KVM_HVHE is set") Signed-off-by: Marc Zyngier maz@kernel.org Reviewed-by: Oliver Upton oliver.upton@linux.dev Link: https://lore.kernel.org/r/20240229145417.3606279-1-maz@kernel.org Signed-off-by: Oliver Upton oliver.upton@linux.dev Signed-off-by: Junhao He hejunhao3@huawei.com --- arch/arm64/kvm/hyp/nvhe/debug-sr.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/kvm/hyp/nvhe/debug-sr.c b/arch/arm64/kvm/hyp/nvhe/debug-sr.c index 4558c02eb352..7746ea507b6f 100644 --- a/arch/arm64/kvm/hyp/nvhe/debug-sr.c +++ b/arch/arm64/kvm/hyp/nvhe/debug-sr.c @@ -31,8 +31,8 @@ static void __debug_save_spe(u64 *pmscr_el1) return;
/* Yes; save the control register and disable data generation */ - *pmscr_el1 = read_sysreg_s(SYS_PMSCR_EL1); - write_sysreg_s(0, SYS_PMSCR_EL1); + *pmscr_el1 = read_sysreg_el1(SYS_PMSCR); + write_sysreg_el1(0, SYS_PMSCR); isb();
/* Now drain all buffered data to memory */ @@ -48,7 +48,7 @@ static void __debug_restore_spe(u64 pmscr_el1) isb();
/* Re-enable data generation */ - write_sysreg_s(pmscr_el1, SYS_PMSCR_EL1); + write_sysreg_el1(pmscr_el1, SYS_PMSCR); }
static void __debug_save_trace(u64 *trfcr_el1) @@ -63,8 +63,8 @@ static void __debug_save_trace(u64 *trfcr_el1) * Since access to TRFCR_EL1 is trapped, the guest can't * modify the filtering set by the host. */ - *trfcr_el1 = read_sysreg_s(SYS_TRFCR_EL1); - write_sysreg_s(0, SYS_TRFCR_EL1); + *trfcr_el1 = read_sysreg_el1(SYS_TRFCR); + write_sysreg_el1(0, SYS_TRFCR); isb(); /* Drain the trace buffer to memory */ tsb_csync(); @@ -76,7 +76,7 @@ static void __debug_restore_trace(u64 trfcr_el1) return;
/* Restore trace filter controls */ - write_sysreg_s(trfcr_el1, SYS_TRFCR_EL1); + write_sysreg_el1(trfcr_el1, SYS_TRFCR); }
void __debug_save_host_buffers_nvhe(struct kvm_vcpu *vcpu)
From: Anshuman Khandual anshuman.khandual@arm.com
maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8EC9K CVE: NA
Reference: https://lore.kernel.org/linux-arm-kernel/20240613061731.3109448-1-anshuman.k...
--------------------------------
This patch adds definitions related to the Branch Record Buffer Extension (BRBE) as per ARM DDI 0487K.a. These will be used by KVM and a BRBE driver in subsequent patches.
Some existing BRBE definitions in asm/sysreg.h are replaced with equivalent generated definitions.
Cc: Catalin Marinas catalin.marinas@arm.com Cc: Will Deacon will@kernel.org Cc: Marc Zyngier maz@kernel.org Cc: Mark Rutland mark.rutland@arm.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Mark Rutland mark.rutland@arm.com Reviewed-by: Mark Brown broonie@kernel.org Signed-off-by: Anshuman Khandual anshuman.khandual@arm.com Signed-off-by: Junhao He hejunhao3@huawei.com --- arch/arm64/include/asm/sysreg.h | 14 ++-- arch/arm64/tools/sysreg | 131 ++++++++++++++++++++++++++++++++ 2 files changed, 137 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 5e036fb4a4bf..faba73f948b1 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -197,16 +197,8 @@ #define SYS_DBGVCR32_EL2 sys_reg(2, 4, 0, 7, 0)
#define SYS_BRBINF_EL1(n) sys_reg(2, 1, 8, (n & 15), (((n & 16) >> 2) | 0)) -#define SYS_BRBINFINJ_EL1 sys_reg(2, 1, 9, 1, 0) #define SYS_BRBSRC_EL1(n) sys_reg(2, 1, 8, (n & 15), (((n & 16) >> 2) | 1)) -#define SYS_BRBSRCINJ_EL1 sys_reg(2, 1, 9, 1, 1) #define SYS_BRBTGT_EL1(n) sys_reg(2, 1, 8, (n & 15), (((n & 16) >> 2) | 2)) -#define SYS_BRBTGTINJ_EL1 sys_reg(2, 1, 9, 1, 2) -#define SYS_BRBTS_EL1 sys_reg(2, 1, 9, 0, 2) - -#define SYS_BRBCR_EL1 sys_reg(2, 1, 9, 0, 0) -#define SYS_BRBFCR_EL1 sys_reg(2, 1, 9, 0, 1) -#define SYS_BRBIDR0_EL1 sys_reg(2, 1, 9, 2, 0)
#define SYS_TRCITECR_EL1 sys_reg(3, 0, 1, 2, 3) #define SYS_TRCACATR(m) sys_reg(2, 1, 2, ((m & 7) << 1), (2 | (m >> 3))) @@ -795,6 +787,12 @@ #define OP_DVP_RCTX sys_insn(1, 3, 7, 3, 5) #define OP_CPP_RCTX sys_insn(1, 3, 7, 3, 7)
+/* + * BRBE Instructions + */ +#define BRB_IALL_INSN __emit_inst(0xd5000000 | OP_BRB_IALL | (0x1f)) +#define BRB_INJ_INSN __emit_inst(0xd5000000 | OP_BRB_INJ | (0x1f)) + /* Common SCTLR_ELx flags. */ #define SCTLR_ELx_ENTP2 (BIT(60)) #define SCTLR_ELx_DSSBS (BIT(44)) diff --git a/arch/arm64/tools/sysreg b/arch/arm64/tools/sysreg index 0e7d7f327410..17286210625b 100644 --- a/arch/arm64/tools/sysreg +++ b/arch/arm64/tools/sysreg @@ -1002,6 +1002,137 @@ UnsignedEnum 3:0 BT EndEnum EndSysreg
+ +SysregFields BRBINFx_EL1 +Res0 63:47 +Field 46 CCU +Field 45:32 CC +Res0 31:18 +Field 17 LASTFAILED +Field 16 T +Res0 15:14 +Enum 13:8 TYPE + 0b000000 DIRECT_UNCOND + 0b000001 INDIRECT + 0b000010 DIRECT_LINK + 0b000011 INDIRECT_LINK + 0b000101 RET + 0b000111 ERET + 0b001000 DIRECT_COND + 0b100001 DEBUG_HALT + 0b100010 CALL + 0b100011 TRAP + 0b100100 SERROR + 0b100110 INSN_DEBUG + 0b100111 DATA_DEBUG + 0b101010 ALIGN_FAULT + 0b101011 INSN_FAULT + 0b101100 DATA_FAULT + 0b101110 IRQ + 0b101111 FIQ + 0b110000 IMPDEF_TRAP_EL3 + 0b111001 DEBUG_EXIT +EndEnum +Enum 7:6 EL + 0b00 EL0 + 0b01 EL1 + 0b10 EL2 + 0b11 EL3 +EndEnum +Field 5 MPRED +Res0 4:2 +Enum 1:0 VALID + 0b00 NONE + 0b01 TARGET + 0b10 SOURCE + 0b11 FULL +EndEnum +EndSysregFields + +SysregFields BRBCR_ELx +Res0 63:24 +Field 23 EXCEPTION +Field 22 ERTN +Res0 21:10 +Field 9 FZPSS +Field 8 FZP +Res0 7 +Enum 6:5 TS + 0b01 VIRTUAL + 0b10 GUEST_PHYSICAL + 0b11 PHYSICAL +EndEnum +Field 4 MPRED +Field 3 CC +Res0 2 +Field 1 ExBRE +Field 0 E0BRE +EndSysregFields + +Sysreg BRBCR_EL1 2 1 9 0 0 +Fields BRBCR_ELx +EndSysreg + +Sysreg BRBFCR_EL1 2 1 9 0 1 +Res0 63:30 +Enum 29:28 BANK + 0b00 BANK_0 + 0b01 BANK_1 +EndEnum +Res0 27:23 +Field 22 CONDDIR +Field 21 DIRCALL +Field 20 INDCALL +Field 19 RTN +Field 18 INDIRECT +Field 17 DIRECT +Field 16 EnI +Res0 15:8 +Field 7 PAUSED +Field 6 LASTFAILED +Res0 5:0 +EndSysreg + +Sysreg BRBTS_EL1 2 1 9 0 2 +Field 63:0 TS +EndSysreg + +Sysreg BRBINFINJ_EL1 2 1 9 1 0 +Fields BRBINFx_EL1 +EndSysreg + +Sysreg BRBSRCINJ_EL1 2 1 9 1 1 +Field 63:0 ADDRESS +EndSysreg + +Sysreg BRBTGTINJ_EL1 2 1 9 1 2 +Field 63:0 ADDRESS +EndSysreg + +Sysreg BRBIDR0_EL1 2 1 9 2 0 +Res0 63:16 +Enum 15:12 CC + 0b0101 20_BIT +EndEnum +Enum 11:8 FORMAT + 0b0000 FORMAT_0 +EndEnum +Enum 7:0 NUMREC + 0b00001000 8 + 0b00010000 16 + 0b00100000 32 + 0b01000000 64 +EndEnum +EndSysreg + +Sysreg BRBCR_EL2 2 4 9 0 0 +Fields BRBCR_ELx +EndSysreg + +Sysreg BRBCR_EL12 2 5 9 0 0 +Fields BRBCR_ELx +EndSysreg + Sysreg ID_AA64ZFR0_EL1 3 0 0 4 4 Res0 63:60 UnsignedEnum 59:56 F64MM
From: Anshuman Khandual anshuman.khandual@arm.com
maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8EC9K CVE: NA
Reference: https://lore.kernel.org/linux-arm-kernel/20240613061731.3109448-1-anshuman.k...
--------------------------------
The Branch Record Buffer Extension (BRBE) adds a number of system registers and instructions, which we don't currently intend to expose to guests. Our existing logic handles this safely, but this could be improved with some explicit handling of BRBE.
The presence of BRBE is currently hidden from guests as the cpufeature code's ftr_id_aa64dfr0[] table doesn't have an entry for the BRBE field, and so this will be zero in the sanitised value of ID_AA64DFR0 exposed to guests via read_sanitised_id_aa64dfr0_el1(). As the ftr_id_aa64dfr0[] table may gain an entry for the BRBE field in future, for robustness we should explicitly mask out the BRBE field in read_sanitised_id_aa64dfr0_el1().
The BRBE system registers and instructions are currently trapped by the existing configuration of the fine-grained traps. As neither the registers nor the instructions are described in the sys_reg_descs[] table, emulate_sys_reg() will warn that these are unknown before injecting an UNDEFINED exception into the guest.
Well-behaved guests shouldn't try to use the registers or instructions, but badly-behaved guests could use these, resulting in unnecessary warnings. To avoid those warnings, we should explicitly handle the BRBE registers and instructions as UNDEFINED.
Address the above by having read_sanitised_id_aa64dfr0_el1() mask out the ID_AA64DFR0.BRBE field, and explicitly handling all of the BRBE system registers and instructions as UNDEFINED.
Cc: Marc Zyngier maz@kernel.org Cc: Oliver Upton oliver.upton@linux.dev Cc: James Morse james.morse@arm.com Cc: Suzuki K Poulose suzuki.poulose@arm.com Cc: Catalin Marinas catalin.marinas@arm.com Cc: Will Deacon will@kernel.org Cc: kvmarm@lists.linux.dev Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Anshuman Khandual anshuman.khandual@arm.com Signed-off-by: Junhao He hejunhao3@huawei.com --- arch/arm64/kvm/sys_regs.c | 56 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+)
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index e4952fe3c5a0..2c9ad2bb6aee 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -1123,6 +1123,11 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p, return true; }
+#define BRB_INF_SRC_TGT_EL1(n) \ + { SYS_DESC(SYS_BRBINF_EL1(n)), undef_access }, \ + { SYS_DESC(SYS_BRBSRC_EL1(n)), undef_access }, \ + { SYS_DESC(SYS_BRBTGT_EL1(n)), undef_access } \ + /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */ #define DBG_BCR_BVR_WCR_WVR_EL1(n) \ { SYS_DESC(SYS_DBGBVRn_EL1(n)), \ @@ -1511,6 +1516,9 @@ static u64 read_sanitised_id_aa64dfr0_el1(struct kvm_vcpu *vcpu, /* Hide SPE from guests */ val &= ~ID_AA64DFR0_EL1_PMSVer_MASK;
+ /* Hide BRBE from guests */ + val &= ~ID_AA64DFR0_EL1_BRBE_MASK; + return val; }
@@ -1973,6 +1981,8 @@ static const struct sys_reg_desc sys_reg_descs[] = { { SYS_DESC(SYS_DC_CISW), access_dcsw }, { SYS_DESC(SYS_DC_CIGSW), access_dcgsw }, { SYS_DESC(SYS_DC_CIGDSW), access_dcgsw }, + { SYS_DESC(OP_BRB_IALL), undef_access }, + { SYS_DESC(OP_BRB_INJ), undef_access },
DBG_BCR_BVR_WCR_WVR_EL1(0), DBG_BCR_BVR_WCR_WVR_EL1(1), @@ -2003,6 +2013,52 @@ static const struct sys_reg_desc sys_reg_descs[] = { { SYS_DESC(SYS_DBGCLAIMCLR_EL1), trap_raz_wi }, { SYS_DESC(SYS_DBGAUTHSTATUS_EL1), trap_dbgauthstatus_el1 },
+ /* + * BRBE branch record sysreg address space is interleaved between + * corresponding BRBINF<N>_EL1, BRBSRC<N>_EL1, and BRBTGT<N>_EL1. + */ + BRB_INF_SRC_TGT_EL1(0), + BRB_INF_SRC_TGT_EL1(16), + BRB_INF_SRC_TGT_EL1(1), + BRB_INF_SRC_TGT_EL1(17), + BRB_INF_SRC_TGT_EL1(2), + BRB_INF_SRC_TGT_EL1(18), + BRB_INF_SRC_TGT_EL1(3), + BRB_INF_SRC_TGT_EL1(19), + BRB_INF_SRC_TGT_EL1(4), + BRB_INF_SRC_TGT_EL1(20), + BRB_INF_SRC_TGT_EL1(5), + BRB_INF_SRC_TGT_EL1(21), + BRB_INF_SRC_TGT_EL1(6), + BRB_INF_SRC_TGT_EL1(22), + BRB_INF_SRC_TGT_EL1(7), + BRB_INF_SRC_TGT_EL1(23), + BRB_INF_SRC_TGT_EL1(8), + BRB_INF_SRC_TGT_EL1(24), + BRB_INF_SRC_TGT_EL1(9), + BRB_INF_SRC_TGT_EL1(25), + BRB_INF_SRC_TGT_EL1(10), + BRB_INF_SRC_TGT_EL1(26), + BRB_INF_SRC_TGT_EL1(11), + BRB_INF_SRC_TGT_EL1(27), + BRB_INF_SRC_TGT_EL1(12), + BRB_INF_SRC_TGT_EL1(28), + BRB_INF_SRC_TGT_EL1(13), + BRB_INF_SRC_TGT_EL1(29), + BRB_INF_SRC_TGT_EL1(14), + BRB_INF_SRC_TGT_EL1(30), + BRB_INF_SRC_TGT_EL1(15), + BRB_INF_SRC_TGT_EL1(31), + + /* Remaining BRBE sysreg addresses space */ + { SYS_DESC(SYS_BRBCR_EL1), undef_access }, + { SYS_DESC(SYS_BRBFCR_EL1), undef_access }, + { SYS_DESC(SYS_BRBTS_EL1), undef_access }, + { SYS_DESC(SYS_BRBINFINJ_EL1), undef_access }, + { SYS_DESC(SYS_BRBSRCINJ_EL1), undef_access }, + { SYS_DESC(SYS_BRBTGTINJ_EL1), undef_access }, + { SYS_DESC(SYS_BRBIDR0_EL1), undef_access }, + { SYS_DESC(SYS_MDCCSR_EL0), trap_raz_wi }, { SYS_DESC(SYS_DBGDTR_EL0), trap_raz_wi }, // DBGDTR[TR]X_EL0 share the same encoding
From: Anshuman Khandual anshuman.khandual@arm.com
maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8EC9K CVE: NA
Reference: https://lore.kernel.org/linux-arm-kernel/20240613061731.3109448-1-anshuman.k...
--------------------------------
In order to support the Branch Record Buffer Extension (BRBE), we need to extend the arm_pmu framework with some basic infrastructure for branch stack sampling which arm_pmu drivers can opt-in to using. Subsequent patches will use this to add support for BRBE in the PMUv3 driver.
With BRBE, the hardware records branches into a hardware FIFO, which will be sampled by software when perf events overflow. A task may be context- switched an arbitrary number of times between overflows, and to avoid losing samples we need to save the current records when a task is context- switched out. To do these we'll need to use the pmu::sched_task() callback, and we'll also need to allocate some per-task storage space via event flag PERF_ATTACH_TASK_DATA.
Cc: Catalin Marinas catalin.marinas@arm.com Cc: Will Deacon will@kernel.org Cc: Mark Rutland mark.rutland@arm.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Anshuman Khandual anshuman.khandual@arm.com Signed-off-by: Junhao He hejunhao3@huawei.com --- drivers/perf/arm_pmu.c | 42 +++++++++++++++++++++++++++++++++--- include/linux/perf/arm_pmu.h | 32 ++++++++++++++++++++++++++- 2 files changed, 70 insertions(+), 4 deletions(-)
diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c index f180148ea7cd..57cd2d1a9a18 100644 --- a/drivers/perf/arm_pmu.c +++ b/drivers/perf/arm_pmu.c @@ -289,6 +289,23 @@ static void armpmu_start(struct perf_event *event, int flags) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct hw_perf_event *hwc = &event->hw; + struct pmu_hw_events *cpuc = this_cpu_ptr(armpmu->hw_events); + int idx; + + /* + * Merge all branch filter requests from different perf + * events being added into this PMU. This includes both + * privilege and branch type filters. + */ + if (armpmu->has_branch_stack) { + cpuc->branch_sample_type = 0; + for (idx = 0; idx < ARMPMU_MAX_HWEVENTS; idx++) { + struct perf_event *event_idx = cpuc->events[idx]; + + if (event_idx && has_branch_stack(event_idx)) + cpuc->branch_sample_type |= event_idx->attr.branch_sample_type; + } + }
/* * ARM pmu always has to reprogram the period, so ignore @@ -317,6 +334,9 @@ armpmu_del(struct perf_event *event, int flags) struct hw_perf_event *hwc = &event->hw; int idx = hwc->idx;
+ if (has_branch_stack(event)) + armpmu->branch_stack_del(event, hw_events); + armpmu_stop(event, PERF_EF_UPDATE); hw_events->events[idx] = NULL; armpmu->clear_event_idx(hw_events, event); @@ -342,6 +362,9 @@ armpmu_add(struct perf_event *event, int flags) if (idx < 0) return idx;
+ if (has_branch_stack(event)) + armpmu->branch_stack_add(event, hw_events); + /* * If there is an event in the counter we are going to use then make * sure it is disabled. @@ -511,13 +534,25 @@ static int armpmu_event_init(struct perf_event *event) !cpumask_test_cpu(event->cpu, &armpmu->supported_cpus)) return -ENOENT;
- /* does not support taken branch sampling */ - if (has_branch_stack(event)) - return -EOPNOTSUPP; + if (has_branch_stack(event)) { + if (!armpmu->has_branch_stack) + return -EOPNOTSUPP; + + if (!armpmu->branch_stack_init(event)) + return -EOPNOTSUPP; + }
return __hw_perf_event_init(event); }
+static void armpmu_sched_task(struct perf_event_pmu_context *pmu_ctx, bool sched_in) +{ + struct arm_pmu *armpmu = to_arm_pmu(pmu_ctx->pmu); + + if (armpmu->sched_task) + armpmu->sched_task(pmu_ctx, sched_in); +} + static void armpmu_enable(struct pmu *pmu) { struct arm_pmu *armpmu = to_arm_pmu(pmu); @@ -881,6 +916,7 @@ struct arm_pmu *armpmu_alloc(void) }
pmu->pmu = (struct pmu) { + .sched_task = armpmu_sched_task, .pmu_enable = armpmu_enable, .pmu_disable = armpmu_disable, .event_init = armpmu_event_init, diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h index 6fab6e84da43..9afe17653c5a 100644 --- a/include/linux/perf/arm_pmu.h +++ b/include/linux/perf/arm_pmu.h @@ -46,6 +46,18 @@ static_assert((PERF_EVENT_FLAG_ARCH & ARMPMU_EVT_63BIT) == ARMPMU_EVT_63BIT); }, \ }
+/* + * Maximum branch record entries which could be processed + * for core perf branch stack sampling support, regardless + * of the hardware support available on a given ARM PMU. + */ +#define MAX_BRANCH_RECORDS 64 + +struct branch_records { + struct perf_branch_stack branch_stack; + struct perf_branch_entry branch_entries[MAX_BRANCH_RECORDS]; +}; + /* The events for a given PMU register set. */ struct pmu_hw_events { /* @@ -72,6 +84,17 @@ struct pmu_hw_events { struct arm_pmu *percpu_pmu;
int irq; + + struct branch_records *branches; + + /* Active context for task events */ + void *branch_context; + + /* Active events requesting branch records */ + unsigned int branch_users; + + /* Active branch sample type filters */ + unsigned long branch_sample_type; };
enum armpmu_attr_groups { @@ -102,8 +125,15 @@ struct arm_pmu { void (*stop)(struct arm_pmu *); void (*reset)(void *); int (*map_event)(struct perf_event *event); + void (*sched_task)(struct perf_event_pmu_context *pmu_ctx, bool sched_in); + bool (*branch_stack_init)(struct perf_event *event); + void (*branch_stack_add)(struct perf_event *event, struct pmu_hw_events *cpuc); + void (*branch_stack_del)(struct perf_event *event, struct pmu_hw_events *cpuc); + void (*branch_stack_reset)(void); int num_events; - bool secure_access; /* 32-bit ARM only */ + unsigned int secure_access : 1, /* 32-bit ARM only */ + has_branch_stack: 1, /* 64-bit ARM only */ + reserved : 30; #define ARMV8_PMUV3_MAX_COMMON_EVENTS 0x40 DECLARE_BITMAP(pmceid_bitmap, ARMV8_PMUV3_MAX_COMMON_EVENTS); #define ARMV8_PMUV3_EXT_COMMON_EVENT_BASE 0x4000
From: Anshuman Khandual anshuman.khandual@arm.com
maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8EC9K CVE: NA
Reference: https://lore.kernel.org/linux-arm-kernel/20240613061731.3109448-1-anshuman.k...
--------------------------------
Fine grained trap control for BRBE registers, and instructions access need to be configured in HDFGRTR_EL2, HDFGWTR_EL2 and HFGITR_EL2 registers when kernel enters at EL1 but EL2 is present. This changes __init_el2_fgt() as required.
Similarly cycle and mis-prediction capture need to be enabled in BRBCR_EL1 and BRBCR_EL2 when the kernel enters either into EL1 or EL2. This adds new __init_el2_brbe() to achieve this objective.
This also updates Documentation/arch/arm64/booting.rst with all the above EL2 along with MDRC_EL3.SBRBE requirements.
First this replaces an existing hard encoding (1 << 62) with corresponding applicable macro HDFGRTR_EL2_nPMSNEVFR_EL1_MASK.
Cc: Catalin Marinas catalin.marinas@arm.com Cc: Will Deacon will@kernel.org Cc: Jonathan Corbet corbet@lwn.net Cc: Marc Zyngier maz@kernel.org Cc: Oliver Upton oliver.upton@linux.dev Cc: linux-arm-kernel@lists.infradead.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Anshuman Khandual anshuman.khandual@arm.com Signed-off-by: Junhao He hejunhao3@huawei.com --- Documentation/arch/arm64/booting.rst | 21 +++++++ arch/arm64/include/asm/el2_setup.h | 87 +++++++++++++++++++++++++++- 2 files changed, 105 insertions(+), 3 deletions(-)
diff --git a/Documentation/arch/arm64/booting.rst b/Documentation/arch/arm64/booting.rst index 29126bf0eac9..408d2e27b641 100644 --- a/Documentation/arch/arm64/booting.rst +++ b/Documentation/arch/arm64/booting.rst @@ -349,6 +349,27 @@ Before jumping into the kernel, the following conditions must be met:
- HWFGWTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01.
+ For CPUs with feature Branch Record Buffer Extension (FEAT_BRBE): + + - If EL3 is present: + + - MDCR_EL3.SBRBE (bits 33:32) must be initialised to 0b11. + + - If the kernel is entered at EL1 and EL2 is present: + + - BRBCR_EL2.CC (bit 3) must be initialised to 0b1. + - BRBCR_EL2.MPRED (bit 4) must be initialised to 0b1. + + - HDFGRTR_EL2.nBRBDATA (bit 61) must be initialised to 0b1. + - HDFGRTR_EL2.nBRBCTL (bit 60) must be initialised to 0b1. + - HDFGRTR_EL2.nBRBIDR (bit 59) must be initialised to 0b1. + + - HDFGWTR_EL2.nBRBDATA (bit 61) must be initialised to 0b1. + - HDFGWTR_EL2.nBRBCTL (bit 60) must be initialised to 0b1. + + - HFGITR_EL2.nBRBIALL (bit 56) must be initialised to 0b1. + - HFGITR_EL2.nBRBINJ (bit 55) must be initialised to 0b1. + For CPUs with the Scalable Matrix Extension FA64 feature (FEAT_SME_FA64):
- If EL3 is present: diff --git a/arch/arm64/include/asm/el2_setup.h b/arch/arm64/include/asm/el2_setup.h index 3dc7c58d55b6..0d56e4bd24e8 100644 --- a/arch/arm64/include/asm/el2_setup.h +++ b/arch/arm64/include/asm/el2_setup.h @@ -155,6 +155,40 @@ .Lskip_set_cptr_@: .endm
+/* + * Enable BRBE to record cycle counts and branch mispredicts. + * + * At any EL, to record cycle counts BRBE requires that both + * BRBCR_EL2.CC=1 and BRBCR_EL1.CC=1. + * + * At any EL, to record branch mispredicts BRBE requires that both + * BRBCR_EL2.MPRED=1 and BRBCR_EL1.MPRED=1. + * + * When HCR_EL2.E2H=1, the BRBCR_EL1 encoding is redirected to + * BRBCR_EL2, but the {CC,MPRED} bits in the real BRBCR_EL1 register + * still apply. + * + * Set {CC,MPRBED} in both BRBCR_EL2 and BRBCR_EL1 so that at runtime we + * only need to enable/disable thse in BRBCR_EL1 regardless of whether + * the kernel ends up executing in EL1 or EL2. + */ +.macro __init_el2_brbe + mrs x1, id_aa64dfr0_el1 + ubfx x1, x1, #ID_AA64DFR0_EL1_BRBE_SHIFT, #4 + cbz x1, .Lskip_brbe_@ + + mov_q x0, BRBCR_ELx_CC | BRBCR_ELx_MPRED + msr_s SYS_BRBCR_EL2, x0 + + __check_hvhe .Lset_brbe_nvhe_@, x1 + msr_s SYS_BRBCR_EL12, x0 // VHE + b .Lskip_brbe_@ + +.Lset_brbe_nvhe_@: + msr_s SYS_BRBCR_EL1, x0 // NVHE +.Lskip_brbe_@: +.endm + /* Disable any fine grained traps */ .macro __init_el2_fgt mrs x1, id_aa64mmfr0_el1 @@ -162,16 +196,48 @@ cbz x1, .Lskip_fgt_@
mov x0, xzr + mov x2, xzr mrs x1, id_aa64dfr0_el1 ubfx x1, x1, #ID_AA64DFR0_EL1_PMSVer_SHIFT, #4 cmp x1, #3 b.lt .Lset_debug_fgt_@ + /* Disable PMSNEVFR_EL1 read and write traps */ - orr x0, x0, #(1 << 62) + orr x0, x0, #HDFGRTR_EL2_nPMSNEVFR_EL1_MASK + orr x2, x2, #HDFGWTR_EL2_nPMSNEVFR_EL1_MASK
.Lset_debug_fgt_@: +#ifdef CONFIG_ARM64_BRBE + mrs x1, id_aa64dfr0_el1 + ubfx x1, x1, #ID_AA64DFR0_EL1_BRBE_SHIFT, #4 + cbz x1, .Lskip_brbe_reg_fgt_@ + + /* + * Disable read traps for the following registers + * + * [BRBSRC|BRBTGT|RBINF]_EL1 + * [BRBSRCINJ|BRBTGTINJ|BRBINFINJ|BRBTS]_EL1 + */ + orr x0, x0, #HDFGRTR_EL2_nBRBDATA_MASK + + /* + * Disable write traps for the following registers + * + * [BRBSRCINJ|BRBTGTINJ|BRBINFINJ|BRBTS]_EL1 + */ + orr x2, x2, #HDFGWTR_EL2_nBRBDATA_MASK + + /* Disable read and write traps for [BRBCR|BRBFCR]_EL1 */ + orr x0, x0, #HDFGRTR_EL2_nBRBCTL_MASK + orr x2, x2, #HDFGWTR_EL2_nBRBCTL_MASK + + /* Disable read traps for BRBIDR_EL1 */ + orr x0, x0, #HDFGRTR_EL2_nBRBIDR_MASK + +.Lskip_brbe_reg_fgt_@: +#endif /* CONFIG_ARM64_BRBE */ msr_s SYS_HDFGRTR_EL2, x0 - msr_s SYS_HDFGWTR_EL2, x0 + msr_s SYS_HDFGWTR_EL2, x2
mov x0, xzr mrs x1, id_aa64pfr1_el1 @@ -194,7 +260,21 @@ .Lset_fgt_@: msr_s SYS_HFGRTR_EL2, x0 msr_s SYS_HFGWTR_EL2, x0 - msr_s SYS_HFGITR_EL2, xzr + mov x0, xzr +#ifdef CONFIG_ARM64_BRBE + mrs x1, id_aa64dfr0_el1 + ubfx x1, x1, #ID_AA64DFR0_EL1_BRBE_SHIFT, #4 + cbz x1, .Lskip_brbe_insn_fgt_@ + + /* Disable traps for BRBIALL instruction */ + orr x0, x0, #HFGITR_EL2_nBRBIALL_MASK + + /* Disable traps for BRBINJ instruction */ + orr x0, x0, #HFGITR_EL2_nBRBINJ_MASK + +.Lskip_brbe_insn_fgt_@: +#endif /* CONFIG_ARM64_BRBE */ + msr_s SYS_HFGITR_EL2, x0
mrs x1, id_aa64pfr0_el1 // AMU traps UNDEF without AMU ubfx x1, x1, #ID_AA64PFR0_EL1_AMU_SHIFT, #4 @@ -245,6 +325,7 @@ __init_el2_nvhe_idregs __init_el2_cptr __init_el2_fgt + __init_el2_brbe .endm
#ifndef __KVM_NVHE_HYPERVISOR__
From: Anshuman Khandual anshuman.khandual@arm.com
maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8EC9K CVE: NA
Reference: https://lore.kernel.org/linux-arm-kernel/20240613061731.3109448-1-anshuman.k...
--------------------------------
This extends recently added branch stack sampling framework in ARMV8 PMU to enable such events via new architecture feature called Branch Record Buffer Extension aka BRBE. This implements all the armv8pmu_branch_xxx() callbacks as expected at ARMV8 PMU level required to drive perf branch stack sampling events. This adds a new config option CONFIG_ARM64_BRBE to encapsulate this BRBE based implementation, available only on ARM64 platforms.
BRBE hardware captures a branch record via three distinct system registers representing branch source address, branch target address, and other branch information. A BRBE buffer implementation is organized as multiple banks of 32 branch records each, which is a collection of BRBSRC_EL1, BRBTGT_EL1 and BRBINF_EL1 registers. Though total BRBE record entries i.e BRBE_MAX_ENTRIES cannot exceed MAX_BRANCH_RECORDS as defined for ARM PMU.
Branch stack sampling is enabled and disabled along with regular PMU events . This adds required function callbacks in armv8pmu_branch_xxx() format, to drive the PMU branch stack hardware when supported. This also adds fallback stub definitions for these callbacks for PMUs which would not have required support.
BRBE hardware attributes get captured in a new reg_brbidr element in struct arm_pmu during armv8pmu_branch_probe() which is called from broader probing function __armv8pmu_probe_pmu(). Attributes such as number of branch record entries implemented in the hardware can be derived from armpmu->reg_brbidr.
BRBE gets enabled via armv8pmu_branch_enable() where it also derives branch filter, and additional requirements from event's 'attr.branch_sample_type' and configures them via BRBFCR_EL1 and BRBCR_EL1 registers.
PMU event overflow triggers IRQ, where current branch records get captured, stitched along with older records available in 'task_ctx', before getting processed for core perf ring buffer. Task context switch outs incrementally save current branch records in event's 'pmu_ctx->task_ctx_data' to optimize workload's branch record samples.
In case multiple events with different branch sample type requests converge on the same PMU, BRBE gets enabled for the merged branch filter accommoding all those event's branch sample type. Captured branch records get filterted in software for an overflown event if BRBE hardware config does not match its branch sample type, while handling the PMU IRQ.
Cc: Catalin Marinas catalin.marinas@arm.com Cc: Will Deacon will@kernel.org Cc: Mark Rutland mark.rutland@arm.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Anshuman Khandual anshuman.khandual@arm.com Signed-off-by: Junhao He hejunhao3@huawei.com --- drivers/perf/Kconfig | 11 + drivers/perf/Makefile | 1 + drivers/perf/arm_brbe.c | 1198 +++++++++++++++++++++++++++++++ drivers/perf/arm_pmuv3.c | 160 ++++- drivers/perf/arm_pmuv3_branch.h | 83 +++ include/linux/perf/arm_pmu.h | 5 + 6 files changed, 1457 insertions(+), 1 deletion(-) create mode 100644 drivers/perf/arm_brbe.c create mode 100644 drivers/perf/arm_pmuv3_branch.h
diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig index 273d67ecf6d2..4cfafe375b17 100644 --- a/drivers/perf/Kconfig +++ b/drivers/perf/Kconfig @@ -180,6 +180,17 @@ config ARM_SPE_PMU Extension, which provides periodic sampling of operations in the CPU pipeline and reports this via the perf AUX interface.
+config ARM64_BRBE + bool "Enable support for branch stack sampling using FEAT_BRBE" + depends on PERF_EVENTS && ARM64 && ARM_PMU + default y + help + Enable perf support for Branch Record Buffer Extension (BRBE) which + records all branches taken in an execution path. This supports some + branch types and privilege based filtering. It captures additional + relevant information such as cycle count, misprediction and branch + type, branch privilege level etc. + config ARM_DMC620_PMU tristate "Enable PMU support for the ARM DMC-620 memory controller" depends on (ARM64 && ACPI) || COMPILE_TEST diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile index 16b3ec4db916..a8b7bc22e3d6 100644 --- a/drivers/perf/Makefile +++ b/drivers/perf/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_RISCV_PMU_SBI) += riscv_pmu_sbi.o obj-$(CONFIG_THUNDERX2_PMU) += thunderx2_pmu.o obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o +obj-$(CONFIG_ARM64_BRBE) += arm_brbe.o obj-$(CONFIG_ARM_DMC620_PMU) += arm_dmc620_pmu.o obj-$(CONFIG_MARVELL_CN10K_TAD_PMU) += marvell_cn10k_tad_pmu.o obj-$(CONFIG_MARVELL_CN10K_DDR_PMU) += marvell_cn10k_ddr_pmu.o diff --git a/drivers/perf/arm_brbe.c b/drivers/perf/arm_brbe.c new file mode 100644 index 000000000000..d795e8fd646f --- /dev/null +++ b/drivers/perf/arm_brbe.c @@ -0,0 +1,1198 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Branch Record Buffer Extension Driver. + * + * Copyright (C) 2022-2023 ARM Limited + * + * Author: Anshuman Khandual anshuman.khandual@arm.com + */ +#include "arm_pmuv3_branch.h" + +#define BRBFCR_EL1_BRANCH_FILTERS (BRBFCR_EL1_DIRECT | \ + BRBFCR_EL1_INDIRECT | \ + BRBFCR_EL1_RTN | \ + BRBFCR_EL1_INDCALL | \ + BRBFCR_EL1_DIRCALL | \ + BRBFCR_EL1_CONDDIR) + +#define BRBFCR_EL1_CONFIG_MASK (BRBFCR_EL1_BANK_MASK | \ + BRBFCR_EL1_PAUSED | \ + BRBFCR_EL1_EnI | \ + BRBFCR_EL1_BRANCH_FILTERS) + +/* + * BRBTS_EL1 is currently not used for branch stack implementation + * purpose but BRBCR_ELx.TS needs to have a valid value from all + * available options. BRBCR_ELx_TS_VIRTUAL is selected for this. + */ +#define BRBCR_ELx_DEFAULT_TS FIELD_PREP(BRBCR_ELx_TS_MASK, BRBCR_ELx_TS_VIRTUAL) + +#define BRBCR_ELx_CONFIG_MASK (BRBCR_ELx_EXCEPTION | \ + BRBCR_ELx_ERTN | \ + BRBCR_ELx_CC | \ + BRBCR_ELx_MPRED | \ + BRBCR_ELx_ExBRE | \ + BRBCR_ELx_E0BRE | \ + BRBCR_ELx_FZP | \ + BRBCR_ELx_TS_MASK) + +/* + * BRBE Buffer Organization + * + * BRBE buffer is arranged as multiple banks of 32 branch record + * entries each. An individual branch record in a given bank could + * be accessed, after selecting the bank in BRBFCR_EL1.BANK and + * accessing the registers i.e [BRBSRC, BRBTGT, BRBINF] set with + * indices [0..31]. + * + * Bank 0 + * + * --------------------------------- ------ + * | 00 | BRBSRC | BRBTGT | BRBINF | | 00 | + * --------------------------------- ------ + * | 01 | BRBSRC | BRBTGT | BRBINF | | 01 | + * --------------------------------- ------ + * | .. | BRBSRC | BRBTGT | BRBINF | | .. | + * --------------------------------- ------ + * | 31 | BRBSRC | BRBTGT | BRBINF | | 31 | + * --------------------------------- ------ + * + * Bank 1 + * + * --------------------------------- ------ + * | 32 | BRBSRC | BRBTGT | BRBINF | | 00 | + * --------------------------------- ------ + * | 33 | BRBSRC | BRBTGT | BRBINF | | 01 | + * --------------------------------- ------ + * | .. | BRBSRC | BRBTGT | BRBINF | | .. | + * --------------------------------- ------ + * | 63 | BRBSRC | BRBTGT | BRBINF | | 31 | + * --------------------------------- ------ + */ +#define BRBE_BANK_MAX_ENTRIES 32 +#define BRBE_MAX_BANK 2 +#define BRBE_MAX_ENTRIES (BRBE_BANK_MAX_ENTRIES * BRBE_MAX_BANK) + +#define BRBE_BANK0_IDX_MIN 0 +#define BRBE_BANK0_IDX_MAX 31 +#define BRBE_BANK1_IDX_MIN 32 +#define BRBE_BANK1_IDX_MAX 63 + +struct brbe_regset { + unsigned long brbsrc; + unsigned long brbtgt; + unsigned long brbinf; +}; + +#define PERF_BR_ARM64_MAX (PERF_BR_MAX + PERF_BR_NEW_MAX) + +struct arm64_perf_task_context { + struct brbe_regset store[BRBE_MAX_ENTRIES]; + int nr_brbe_records; + + /* + * Branch Filter Mask + * + * This mask represents all branch record types i.e PERF_BR_XXX + * (as defined in core perf ABI) that can be generated with the + * event's branch_sample_type request. The mask layout could be + * found here. Although the bit 15 i.e PERF_BR_EXTEND_ABI never + * gets set in the mask. + * + * 23 (PERF_BR_MAX + PERF_BR_NEW_MAX) 0 + * | | + * --------------------------------------------------------- + * | Extended ABI section | X | ABI section | + * --------------------------------------------------------- + */ + DECLARE_BITMAP(br_type_mask, PERF_BR_ARM64_MAX); +}; + +static void branch_mask_set_all(unsigned long *event_type_mask) +{ + int idx; + + for (idx = PERF_BR_UNKNOWN; idx < PERF_BR_EXTEND_ABI; idx++) + set_bit(idx, event_type_mask); + + for (idx = PERF_BR_NEW_FAULT_ALGN; idx < PERF_BR_NEW_MAX; idx++) + set_bit(PERF_BR_MAX + idx, event_type_mask); +} + +static void branch_mask_set_arch(unsigned long *event_type_mask) +{ + set_bit(PERF_BR_MAX + PERF_BR_NEW_FAULT_ALGN, event_type_mask); + set_bit(PERF_BR_MAX + PERF_BR_NEW_FAULT_DATA, event_type_mask); + set_bit(PERF_BR_MAX + PERF_BR_NEW_FAULT_INST, event_type_mask); + + set_bit(PERF_BR_MAX + PERF_BR_ARM64_FIQ, event_type_mask); + set_bit(PERF_BR_MAX + PERF_BR_ARM64_DEBUG_HALT, event_type_mask); + set_bit(PERF_BR_MAX + PERF_BR_ARM64_DEBUG_EXIT, event_type_mask); + set_bit(PERF_BR_MAX + PERF_BR_ARM64_DEBUG_INST, event_type_mask); + set_bit(PERF_BR_MAX + PERF_BR_ARM64_DEBUG_DATA, event_type_mask); +} + +static void branch_entry_mask(struct perf_branch_entry *entry, + unsigned long *event_type_mask) +{ + u64 idx; + + bitmap_zero(event_type_mask, PERF_BR_ARM64_MAX); + for (idx = PERF_BR_UNKNOWN; idx < PERF_BR_EXTEND_ABI; idx++) { + if (entry->type == idx) + set_bit(idx, event_type_mask); + } + + if (entry->type == PERF_BR_EXTEND_ABI) { + for (idx = PERF_BR_NEW_FAULT_ALGN; idx < PERF_BR_NEW_MAX; idx++) { + if (entry->new_type == idx) + set_bit(PERF_BR_MAX + idx, event_type_mask); + } + } +} + +static void prepare_event_branch_type_mask(struct perf_event *event, + unsigned long *event_type_mask) +{ + u64 branch_sample = event->attr.branch_sample_type; + + bitmap_zero(event_type_mask, PERF_BR_ARM64_MAX); + + /* + * The platform specific branch types might not follow event's + * branch filter requests accurately. Let's add all of them as + * acceptible branch types during the filtering process. + */ + branch_mask_set_arch(event_type_mask); + + if (branch_sample & PERF_SAMPLE_BRANCH_ANY) { + branch_mask_set_all(event_type_mask); + return; + } + + if (branch_sample & PERF_SAMPLE_BRANCH_IND_JUMP) + set_bit(PERF_BR_IND, event_type_mask); + + set_bit(PERF_BR_UNCOND, event_type_mask); + if (branch_sample & PERF_SAMPLE_BRANCH_COND) { + clear_bit(PERF_BR_UNCOND, event_type_mask); + set_bit(PERF_BR_COND, event_type_mask); + } + + if (branch_sample & PERF_SAMPLE_BRANCH_CALL) + set_bit(PERF_BR_CALL, event_type_mask); + + if (branch_sample & PERF_SAMPLE_BRANCH_IND_CALL) + set_bit(PERF_BR_IND_CALL, event_type_mask); + + if (branch_sample & PERF_SAMPLE_BRANCH_ANY_CALL) { + set_bit(PERF_BR_CALL, event_type_mask); + set_bit(PERF_BR_IRQ, event_type_mask); + set_bit(PERF_BR_SYSCALL, event_type_mask); + set_bit(PERF_BR_SERROR, event_type_mask); + + if (branch_sample & PERF_SAMPLE_BRANCH_COND) + set_bit(PERF_BR_COND_CALL, event_type_mask); + } + + if (branch_sample & PERF_SAMPLE_BRANCH_ANY_RETURN) { + set_bit(PERF_BR_RET, event_type_mask); + set_bit(PERF_BR_ERET, event_type_mask); + set_bit(PERF_BR_SYSRET, event_type_mask); + + if (branch_sample & PERF_SAMPLE_BRANCH_COND) + set_bit(PERF_BR_COND_RET, event_type_mask); + } +} + +struct brbe_hw_attr { + int brbe_version; + int brbe_cc; + int brbe_nr; + int brbe_format; +}; + +#define RETURN_READ_BRBSRCN(n) \ + read_sysreg_s(SYS_BRBSRC_EL1(n)) + +#define RETURN_READ_BRBTGTN(n) \ + read_sysreg_s(SYS_BRBTGT_EL1(n)) + +#define RETURN_READ_BRBINFN(n) \ + read_sysreg_s(SYS_BRBINF_EL1(n)) + +#define BRBE_REGN_CASE(n, case_macro) \ + case n: return case_macro(n); break + +#define BRBE_REGN_SWITCH(x, case_macro) \ + do { \ + switch (x) { \ + BRBE_REGN_CASE(0, case_macro); \ + BRBE_REGN_CASE(1, case_macro); \ + BRBE_REGN_CASE(2, case_macro); \ + BRBE_REGN_CASE(3, case_macro); \ + BRBE_REGN_CASE(4, case_macro); \ + BRBE_REGN_CASE(5, case_macro); \ + BRBE_REGN_CASE(6, case_macro); \ + BRBE_REGN_CASE(7, case_macro); \ + BRBE_REGN_CASE(8, case_macro); \ + BRBE_REGN_CASE(9, case_macro); \ + BRBE_REGN_CASE(10, case_macro); \ + BRBE_REGN_CASE(11, case_macro); \ + BRBE_REGN_CASE(12, case_macro); \ + BRBE_REGN_CASE(13, case_macro); \ + BRBE_REGN_CASE(14, case_macro); \ + BRBE_REGN_CASE(15, case_macro); \ + BRBE_REGN_CASE(16, case_macro); \ + BRBE_REGN_CASE(17, case_macro); \ + BRBE_REGN_CASE(18, case_macro); \ + BRBE_REGN_CASE(19, case_macro); \ + BRBE_REGN_CASE(20, case_macro); \ + BRBE_REGN_CASE(21, case_macro); \ + BRBE_REGN_CASE(22, case_macro); \ + BRBE_REGN_CASE(23, case_macro); \ + BRBE_REGN_CASE(24, case_macro); \ + BRBE_REGN_CASE(25, case_macro); \ + BRBE_REGN_CASE(26, case_macro); \ + BRBE_REGN_CASE(27, case_macro); \ + BRBE_REGN_CASE(28, case_macro); \ + BRBE_REGN_CASE(29, case_macro); \ + BRBE_REGN_CASE(30, case_macro); \ + BRBE_REGN_CASE(31, case_macro); \ + default: \ + pr_warn("unknown register index\n"); \ + return -1; \ + } \ + } while (0) + +static inline int buffer_to_brbe_idx(int buffer_idx) +{ + return buffer_idx % BRBE_BANK_MAX_ENTRIES; +} + +static inline u64 get_brbsrc_reg(int buffer_idx) +{ + int brbe_idx = buffer_to_brbe_idx(buffer_idx); + + BRBE_REGN_SWITCH(brbe_idx, RETURN_READ_BRBSRCN); +} + +static inline u64 get_brbtgt_reg(int buffer_idx) +{ + int brbe_idx = buffer_to_brbe_idx(buffer_idx); + + BRBE_REGN_SWITCH(brbe_idx, RETURN_READ_BRBTGTN); +} + +static inline u64 get_brbinf_reg(int buffer_idx) +{ + int brbe_idx = buffer_to_brbe_idx(buffer_idx); + + BRBE_REGN_SWITCH(brbe_idx, RETURN_READ_BRBINFN); +} + +static inline u64 brbe_record_valid(u64 brbinf) +{ + return FIELD_GET(BRBINFx_EL1_VALID_MASK, brbinf); +} + +static inline bool brbe_invalid(u64 brbinf) +{ + return brbe_record_valid(brbinf) == BRBINFx_EL1_VALID_NONE; +} + +static inline bool brbe_record_is_complete(u64 brbinf) +{ + return brbe_record_valid(brbinf) == BRBINFx_EL1_VALID_FULL; +} + +static inline bool brbe_record_is_source_only(u64 brbinf) +{ + return brbe_record_valid(brbinf) == BRBINFx_EL1_VALID_SOURCE; +} + +static inline bool brbe_record_is_target_only(u64 brbinf) +{ + return brbe_record_valid(brbinf) == BRBINFx_EL1_VALID_TARGET; +} + +static inline int brbe_get_in_tx(u64 brbinf) +{ + return FIELD_GET(BRBINFx_EL1_T_MASK, brbinf); +} + +static inline int brbe_get_mispredict(u64 brbinf) +{ + return FIELD_GET(BRBINFx_EL1_MPRED_MASK, brbinf); +} + +static inline int brbe_get_lastfailed(u64 brbinf) +{ + return FIELD_GET(BRBINFx_EL1_LASTFAILED_MASK, brbinf); +} + +static inline int brbe_get_cycles(u64 brbinf) +{ + /* + * Captured cycle count is unknown and hence + * should not be passed on to the user space. + */ + if (brbinf & BRBINFx_EL1_CCU) + return 0; + + return FIELD_GET(BRBINFx_EL1_CC_MASK, brbinf); +} + +static inline int brbe_get_type(u64 brbinf) +{ + return FIELD_GET(BRBINFx_EL1_TYPE_MASK, brbinf); +} + +static inline int brbe_get_el(u64 brbinf) +{ + return FIELD_GET(BRBINFx_EL1_EL_MASK, brbinf); +} + +static inline int brbe_get_numrec(u64 brbidr) +{ + return FIELD_GET(BRBIDR0_EL1_NUMREC_MASK, brbidr); +} + +static inline int brbe_get_format(u64 brbidr) +{ + return FIELD_GET(BRBIDR0_EL1_FORMAT_MASK, brbidr); +} + +static inline int brbe_get_cc_bits(u64 brbidr) +{ + return FIELD_GET(BRBIDR0_EL1_CC_MASK, brbidr); +} + +void armv8pmu_branch_stack_reset(void) +{ + asm volatile(BRB_IALL_INSN); + isb(); +} + +void armv8pmu_branch_stack_add(struct perf_event *event, struct pmu_hw_events *hw_events) +{ + struct arm64_perf_task_context *task_ctx = event->pmu_ctx->task_ctx_data; + + if (event->ctx->task) + prepare_event_branch_type_mask(event, task_ctx->br_type_mask); + + /* + * Reset branch records buffer if a new CPU bound event + * gets scheduled on a PMU. Otherwise existing branch + * records present in the buffer might just leak into + * such events. + * + * Also reset current 'hw_events->branch_context' because + * any previous task bound event now would have lost an + * opportunity for continuous branch records. + */ + if (!event->ctx->task) { + hw_events->branch_context = NULL; + armv8pmu_branch_stack_reset(); + } + + /* + * Reset branch records buffer if a new task event gets + * scheduled on a PMU which might have existing records. + * Otherwise older branch records present in the buffer + * might leak into the new task event. + */ + if (event->ctx->task && hw_events->branch_context != event->ctx) { + hw_events->branch_context = event->ctx; + armv8pmu_branch_stack_reset(); + } + hw_events->branch_users++; +} + +void armv8pmu_branch_stack_del(struct perf_event *event, struct pmu_hw_events *hw_events) +{ + WARN_ON_ONCE(!hw_events->branch_users); + hw_events->branch_users--; + if (!hw_events->branch_users) { + hw_events->branch_context = NULL; + hw_events->branch_sample_type = 0; + } +} + +static bool valid_brbe_nr(int brbe_nr) +{ + return brbe_nr == BRBIDR0_EL1_NUMREC_8 || + brbe_nr == BRBIDR0_EL1_NUMREC_16 || + brbe_nr == BRBIDR0_EL1_NUMREC_32 || + brbe_nr == BRBIDR0_EL1_NUMREC_64; +} + +static bool valid_brbe_cc(int brbe_cc) +{ + return brbe_cc == BRBIDR0_EL1_CC_20_BIT; +} + +static bool valid_brbe_format(int brbe_format) +{ + return brbe_format == BRBIDR0_EL1_FORMAT_FORMAT_0; +} + +static bool valid_brbe_version(int brbe_version) +{ + return brbe_version == ID_AA64DFR0_EL1_BRBE_IMP || + brbe_version == ID_AA64DFR0_EL1_BRBE_BRBE_V1P1; +} + +static void select_brbe_bank(int bank) +{ + u64 brbfcr; + + WARN_ON(bank > 1); + brbfcr = read_sysreg_s(SYS_BRBFCR_EL1); + brbfcr &= ~BRBFCR_EL1_BANK_MASK; + brbfcr |= SYS_FIELD_PREP(BRBFCR_EL1, BANK, bank); + write_sysreg_s(brbfcr, SYS_BRBFCR_EL1); + isb(); +} + +static bool __read_brbe_regset(struct brbe_regset *entry, int idx) +{ + entry->brbinf = get_brbinf_reg(idx); + + if (brbe_invalid(entry->brbinf)) + return false; + + entry->brbsrc = get_brbsrc_reg(idx); + entry->brbtgt = get_brbtgt_reg(idx); + return true; +} + +/* + * Read all BRBE entries in HW until the first invalid entry. + * + * The caller must ensure that the BRBE is not concurrently modifying these + * branch entries. + */ +static int capture_brbe_regset(struct brbe_regset *buf, int nr_hw_entries) +{ + int idx = 0; + + select_brbe_bank(0); + while (idx < nr_hw_entries && idx <= BRBE_BANK0_IDX_MAX) { + if (!__read_brbe_regset(&buf[idx], idx)) + return idx; + idx++; + } + + select_brbe_bank(1); + while (idx < nr_hw_entries && idx <= BRBE_BANK1_IDX_MAX) { + if (!__read_brbe_regset(&buf[idx], idx)) + return idx; + idx++; + } + return idx; +} + +/* + * This function concatenates branch records from stored and live buffer + * up to maximum nr_max records and the stored buffer holds the resultant + * buffer. The concatenated buffer contains all the branch records from + * the live buffer but might contain some from stored buffer considering + * the maximum combined length does not exceed 'nr_max'. + * + * Stored records Live records + * ------------------------------------------------^ + * | S0 | L0 | Newest | + * --------------------------------- | + * | S1 | L1 | | + * --------------------------------- | + * | S2 | L2 | | + * --------------------------------- | + * | S3 | L3 | | + * --------------------------------- | + * | S4 | L4 | nr_max + * --------------------------------- | + * | | L5 | | + * --------------------------------- | + * | | L6 | | + * --------------------------------- | + * | | L7 | | + * --------------------------------- | + * | | | | + * --------------------------------- | + * | | | Oldest | + * ------------------------------------------------V + * + * + * S0 is the newest in the stored records, where as L7 is the oldest in + * the live records. Unless the live buffer is detected as being full + * thus potentially dropping off some older records, L7 and S0 records + * are contiguous in time for a user task context. The stitched buffer + * here represents maximum possible branch records, contiguous in time. + * + * Stored records Live records + * ------------------------------------------------^ + * | L0 | L0 | Newest | + * --------------------------------- | + * | L1 | L1 | | + * --------------------------------- | + * | L2 | L2 | | + * --------------------------------- | + * | L3 | L3 | | + * --------------------------------- | + * | L4 | L4 | nr_max + * --------------------------------- | + * | L5 | L5 | | + * --------------------------------- | + * | L6 | L6 | | + * --------------------------------- | + * | L7 | L7 | | + * --------------------------------- | + * | S0 | | | + * --------------------------------- | + * | S1 | | Oldest | + * ------------------------------------------------V + * | S2 | <----| + * ----------------- | + * | S3 | <----| Dropped off after nr_max + * ----------------- | + * | S4 | <----| + * ----------------- + */ +static int stitch_stored_live_entries(struct brbe_regset *stored, + struct brbe_regset *live, + int nr_stored, int nr_live, + int nr_max) +{ + int nr_move = min(nr_stored, nr_max - nr_live); + + /* Move the tail of the buffer to make room for the new entries */ + memmove(&stored[nr_live], &stored[0], nr_move * sizeof(*stored)); + + /* Copy the new entries into the head of the buffer */ + memcpy(&stored[0], &live[0], nr_live * sizeof(*stored)); + + /* Return the number of entries in the stitched buffer */ + return min(nr_live + nr_stored, nr_max); +} + +static int brbe_branch_save(struct brbe_regset *live, int nr_hw_entries) +{ + u64 brbfcr = read_sysreg_s(SYS_BRBFCR_EL1); + int nr_live; + + write_sysreg_s(brbfcr | BRBFCR_EL1_PAUSED, SYS_BRBFCR_EL1); + isb(); + + nr_live = capture_brbe_regset(live, nr_hw_entries); + + write_sysreg_s(brbfcr & ~BRBFCR_EL1_PAUSED, SYS_BRBFCR_EL1); + isb(); + + return nr_live; +} + +void armv8pmu_branch_save(struct arm_pmu *arm_pmu, void *ctx) +{ + struct arm64_perf_task_context *task_ctx = ctx; + struct brbe_regset live[BRBE_MAX_ENTRIES]; + int nr_live, nr_store, nr_hw_entries; + + nr_hw_entries = brbe_get_numrec(arm_pmu->reg_brbidr); + nr_live = brbe_branch_save(live, nr_hw_entries); + nr_store = task_ctx->nr_brbe_records; + nr_store = stitch_stored_live_entries(task_ctx->store, live, nr_store, + nr_live, nr_hw_entries); + task_ctx->nr_brbe_records = nr_store; +} + +/* + * Generic perf branch filters supported on BRBE + * + * New branch filters need to be evaluated whether they could be supported on + * BRBE. This ensures that such branch filters would not just be accepted, to + * fail silently. PERF_SAMPLE_BRANCH_HV is a special case that is selectively + * supported only on platforms where kernel is in hyp mode. + */ +#define BRBE_EXCLUDE_BRANCH_FILTERS (PERF_SAMPLE_BRANCH_ABORT_TX | \ + PERF_SAMPLE_BRANCH_IN_TX | \ + PERF_SAMPLE_BRANCH_NO_TX | \ + PERF_SAMPLE_BRANCH_CALL_STACK | \ + PERF_SAMPLE_BRANCH_COUNTERS) + +#define BRBE_ALLOWED_BRANCH_FILTERS (PERF_SAMPLE_BRANCH_USER | \ + PERF_SAMPLE_BRANCH_KERNEL | \ + PERF_SAMPLE_BRANCH_HV | \ + PERF_SAMPLE_BRANCH_ANY | \ + PERF_SAMPLE_BRANCH_ANY_CALL | \ + PERF_SAMPLE_BRANCH_ANY_RETURN | \ + PERF_SAMPLE_BRANCH_IND_CALL | \ + PERF_SAMPLE_BRANCH_COND | \ + PERF_SAMPLE_BRANCH_IND_JUMP | \ + PERF_SAMPLE_BRANCH_CALL | \ + PERF_SAMPLE_BRANCH_NO_FLAGS | \ + PERF_SAMPLE_BRANCH_NO_CYCLES | \ + PERF_SAMPLE_BRANCH_TYPE_SAVE | \ + PERF_SAMPLE_BRANCH_HW_INDEX | \ + PERF_SAMPLE_BRANCH_PRIV_SAVE) + +#define BRBE_PERF_BRANCH_FILTERS (BRBE_ALLOWED_BRANCH_FILTERS | \ + BRBE_EXCLUDE_BRANCH_FILTERS) + +bool armv8pmu_branch_attr_valid(struct perf_event *event) +{ + u64 branch_type = event->attr.branch_sample_type; + + /* + * Ensure both perf branch filter allowed and exclude + * masks are always in sync with the generic perf ABI. + */ + BUILD_BUG_ON(BRBE_PERF_BRANCH_FILTERS != (PERF_SAMPLE_BRANCH_MAX - 1)); + + if (branch_type & ~BRBE_ALLOWED_BRANCH_FILTERS) { + pr_debug_once("requested branch filter not supported 0x%llx\n", branch_type); + return false; + } + + /* + * If the event does not have at least one of the privilege + * branch filters as in PERF_SAMPLE_BRANCH_PLM_ALL, the core + * perf will adjust its value based on perf event's existing + * privilege level via attr.exclude_[user|kernel|hv]. + * + * As event->attr.branch_sample_type might have been changed + * when the event reaches here, it is not possible to figure + * out whether the event originally had HV privilege request + * or got added via the core perf. Just report this situation + * once and continue ignoring if there are other instances. + */ + if ((branch_type & PERF_SAMPLE_BRANCH_HV) && !is_kernel_in_hyp_mode()) + pr_debug_once("hypervisor privilege filter not supported 0x%llx\n", branch_type); + + return true; +} + +int armv8pmu_task_ctx_cache_alloc(struct arm_pmu *arm_pmu) +{ + size_t size = sizeof(struct arm64_perf_task_context); + + arm_pmu->pmu.task_ctx_cache = kmem_cache_create("arm64_brbe_task_ctx", size, 0, 0, NULL); + if (!arm_pmu->pmu.task_ctx_cache) + return -ENOMEM; + return 0; +} + +void armv8pmu_task_ctx_cache_free(struct arm_pmu *arm_pmu) +{ + kmem_cache_destroy(arm_pmu->pmu.task_ctx_cache); +} + +static int brbe_attributes_probe(struct arm_pmu *armpmu, u32 brbe) +{ + u64 brbidr = read_sysreg_s(SYS_BRBIDR0_EL1); + int brbe_version, brbe_format, brbe_cc, brbe_nr; + + brbe_version = brbe; + brbe_format = brbe_get_format(brbidr); + brbe_cc = brbe_get_cc_bits(brbidr); + brbe_nr = brbe_get_numrec(brbidr); + armpmu->reg_brbidr = brbidr; + + if (!valid_brbe_version(brbe_version) || + !valid_brbe_format(brbe_format) || + !valid_brbe_cc(brbe_cc) || + !valid_brbe_nr(brbe_nr)) + return -EOPNOTSUPP; + return 0; +} + +void armv8pmu_branch_probe(struct arm_pmu *armpmu) +{ + u64 aa64dfr0 = read_sysreg_s(SYS_ID_AA64DFR0_EL1); + u32 brbe; + + /* + * BRBE implementation's branch entries cannot exceed maximum + * branch records supported at the ARM PMU level abstraction. + * Otherwise there is always a possibility of array overflow, + * while processing BRBE branch records. + */ + BUILD_BUG_ON(BRBE_BANK_MAX_ENTRIES > MAX_BRANCH_RECORDS); + + brbe = cpuid_feature_extract_unsigned_field(aa64dfr0, ID_AA64DFR0_EL1_BRBE_SHIFT); + if (!brbe) + return; + + if (brbe_attributes_probe(armpmu, brbe)) + return; + + armpmu->has_branch_stack = 1; +} + +/* + * BRBE supports the following functional branch type filters while + * generating branch records. These branch filters can be enabled, + * either individually or as a group i.e ORing multiple filters + * with each other. + * + * BRBFCR_EL1_CONDDIR - Conditional direct branch + * BRBFCR_EL1_DIRCALL - Direct call + * BRBFCR_EL1_INDCALL - Indirect call + * BRBFCR_EL1_INDIRECT - Indirect branch + * BRBFCR_EL1_DIRECT - Direct branch + * BRBFCR_EL1_RTN - Subroutine return + */ +static u64 branch_type_to_brbfcr(int branch_type) +{ + u64 brbfcr = 0; + + if (branch_type & PERF_SAMPLE_BRANCH_ANY) { + brbfcr |= BRBFCR_EL1_BRANCH_FILTERS; + return brbfcr; + } + + if (branch_type & PERF_SAMPLE_BRANCH_ANY_CALL) { + brbfcr |= BRBFCR_EL1_INDCALL; + brbfcr |= BRBFCR_EL1_DIRCALL; + } + + if (branch_type & PERF_SAMPLE_BRANCH_ANY_RETURN) + brbfcr |= BRBFCR_EL1_RTN; + + if (branch_type & PERF_SAMPLE_BRANCH_IND_CALL) + brbfcr |= BRBFCR_EL1_INDCALL; + + if (branch_type & PERF_SAMPLE_BRANCH_COND) + brbfcr |= BRBFCR_EL1_CONDDIR; + + if (branch_type & PERF_SAMPLE_BRANCH_IND_JUMP) + brbfcr |= BRBFCR_EL1_INDIRECT; + + if (branch_type & PERF_SAMPLE_BRANCH_CALL) + brbfcr |= BRBFCR_EL1_DIRCALL; + + return brbfcr & BRBFCR_EL1_CONFIG_MASK; +} + +/* + * BRBE supports the following privilege mode filters while generating + * branch records. + * + * BRBCR_ELx_E0BRE - EL0 branch records + * BRBCR_ELx_ExBRE - EL1/EL2 branch records + * + * BRBE also supports the following additional functional branch type + * filters while generating branch records. + * + * BRBCR_ELx_EXCEPTION - Exception + * BRBCR_ELx_ERTN - Exception return + */ +static u64 branch_type_to_brbcr(int branch_type) +{ + u64 brbcr = BRBCR_ELx_DEFAULT_TS; + + /* + * BRBE should be paused on PMU interrupt while tracing kernel + * space to stop capturing further branch records. Otherwise + * interrupt handler branch records might get into the samples + * which is not desired. + * + * BRBE need not be paused on PMU interrupt while tracing only + * the user space, because it will automatically be inside the + * prohibited region. But even after PMU overflow occurs, the + * interrupt could still take much more cycles, before it can + * be taken and by that time BRBE will have been overwritten. + * Hence enable pause on PMU interrupt mechanism even for user + * only traces as well. + */ + brbcr |= BRBCR_ELx_FZP; + + if (branch_type & PERF_SAMPLE_BRANCH_USER) + brbcr |= BRBCR_ELx_E0BRE; + + /* + * When running in the hyp mode, writing into BRBCR_EL1 + * actually writes into BRBCR_EL2 instead. Field E2BRE + * is also at the same position as E1BRE. + */ + if (branch_type & PERF_SAMPLE_BRANCH_KERNEL) + brbcr |= BRBCR_ELx_ExBRE; + + if (branch_type & PERF_SAMPLE_BRANCH_HV) { + if (is_kernel_in_hyp_mode()) + brbcr |= BRBCR_ELx_ExBRE; + } + + if (!(branch_type & PERF_SAMPLE_BRANCH_NO_CYCLES)) + brbcr |= BRBCR_ELx_CC; + + if (!(branch_type & PERF_SAMPLE_BRANCH_NO_FLAGS)) + brbcr |= BRBCR_ELx_MPRED; + + /* + * The exception and exception return branches could be + * captured, irrespective of the perf event's privilege. + * If the perf event does not have enough privilege for + * a given exception level, then addresses which falls + * under that exception level will be reported as zero + * for the captured branch record, creating source only + * or target only records. + */ + if (branch_type & PERF_SAMPLE_BRANCH_ANY) { + brbcr |= BRBCR_ELx_EXCEPTION; + brbcr |= BRBCR_ELx_ERTN; + } + + if (branch_type & PERF_SAMPLE_BRANCH_ANY_CALL) + brbcr |= BRBCR_ELx_EXCEPTION; + + if (branch_type & PERF_SAMPLE_BRANCH_ANY_RETURN) + brbcr |= BRBCR_ELx_ERTN; + + return brbcr & BRBCR_ELx_CONFIG_MASK; +} + +void armv8pmu_branch_enable(struct arm_pmu *arm_pmu) +{ + struct pmu_hw_events *cpuc = this_cpu_ptr(arm_pmu->hw_events); + u64 brbfcr, brbcr; + + if (!(cpuc->branch_sample_type && cpuc->branch_users)) + return; + + /* + * BRBE gets configured with a new mismatched branch sample + * type request, overriding any previous branch filters. + */ + brbfcr = read_sysreg_s(SYS_BRBFCR_EL1); + brbfcr &= ~BRBFCR_EL1_CONFIG_MASK; + brbfcr |= branch_type_to_brbfcr(cpuc->branch_sample_type); + write_sysreg_s(brbfcr, SYS_BRBFCR_EL1); + isb(); + + brbcr = read_sysreg_s(SYS_BRBCR_EL1); + brbcr &= ~BRBCR_ELx_CONFIG_MASK; + brbcr |= branch_type_to_brbcr(cpuc->branch_sample_type); + write_sysreg_s(brbcr, SYS_BRBCR_EL1); + isb(); +} + +void armv8pmu_branch_disable(void) +{ + u64 brbfcr, brbcr; + + brbcr = read_sysreg_s(SYS_BRBCR_EL1); + brbfcr = read_sysreg_s(SYS_BRBFCR_EL1); + brbcr &= ~(BRBCR_ELx_E0BRE | BRBCR_ELx_ExBRE); + brbfcr |= BRBFCR_EL1_PAUSED; + write_sysreg_s(brbcr, SYS_BRBCR_EL1); + write_sysreg_s(brbfcr, SYS_BRBFCR_EL1); + isb(); +} + +static void brbe_set_perf_entry_type(struct perf_branch_entry *entry, u64 brbinf) +{ + int brbe_type = brbe_get_type(brbinf); + + switch (brbe_type) { + case BRBINFx_EL1_TYPE_DIRECT_UNCOND: + entry->type = PERF_BR_UNCOND; + break; + case BRBINFx_EL1_TYPE_INDIRECT: + entry->type = PERF_BR_IND; + break; + case BRBINFx_EL1_TYPE_DIRECT_LINK: + entry->type = PERF_BR_CALL; + break; + case BRBINFx_EL1_TYPE_INDIRECT_LINK: + entry->type = PERF_BR_IND_CALL; + break; + case BRBINFx_EL1_TYPE_RET: + entry->type = PERF_BR_RET; + break; + case BRBINFx_EL1_TYPE_DIRECT_COND: + entry->type = PERF_BR_COND; + break; + case BRBINFx_EL1_TYPE_CALL: + entry->type = PERF_BR_CALL; + break; + case BRBINFx_EL1_TYPE_TRAP: + entry->type = PERF_BR_SYSCALL; + break; + case BRBINFx_EL1_TYPE_ERET: + entry->type = PERF_BR_ERET; + break; + case BRBINFx_EL1_TYPE_IRQ: + entry->type = PERF_BR_IRQ; + break; + case BRBINFx_EL1_TYPE_DEBUG_HALT: + entry->type = PERF_BR_EXTEND_ABI; + entry->new_type = PERF_BR_ARM64_DEBUG_HALT; + break; + case BRBINFx_EL1_TYPE_SERROR: + entry->type = PERF_BR_SERROR; + break; + case BRBINFx_EL1_TYPE_INSN_DEBUG: + entry->type = PERF_BR_EXTEND_ABI; + entry->new_type = PERF_BR_ARM64_DEBUG_INST; + break; + case BRBINFx_EL1_TYPE_DATA_DEBUG: + entry->type = PERF_BR_EXTEND_ABI; + entry->new_type = PERF_BR_ARM64_DEBUG_DATA; + break; + case BRBINFx_EL1_TYPE_ALIGN_FAULT: + entry->type = PERF_BR_EXTEND_ABI; + entry->new_type = PERF_BR_NEW_FAULT_ALGN; + break; + case BRBINFx_EL1_TYPE_INSN_FAULT: + entry->type = PERF_BR_EXTEND_ABI; + entry->new_type = PERF_BR_NEW_FAULT_INST; + break; + case BRBINFx_EL1_TYPE_DATA_FAULT: + entry->type = PERF_BR_EXTEND_ABI; + entry->new_type = PERF_BR_NEW_FAULT_DATA; + break; + case BRBINFx_EL1_TYPE_FIQ: + entry->type = PERF_BR_EXTEND_ABI; + entry->new_type = PERF_BR_ARM64_FIQ; + break; + case BRBINFx_EL1_TYPE_DEBUG_EXIT: + entry->type = PERF_BR_EXTEND_ABI; + entry->new_type = PERF_BR_ARM64_DEBUG_EXIT; + break; + default: + pr_warn_once("%d - unknown branch type captured\n", brbe_type); + entry->type = PERF_BR_UNKNOWN; + break; + } +} + +static int brbe_get_perf_priv(u64 brbinf) +{ + int brbe_el = brbe_get_el(brbinf); + + switch (brbe_el) { + case BRBINFx_EL1_EL_EL0: + return PERF_BR_PRIV_USER; + case BRBINFx_EL1_EL_EL1: + return PERF_BR_PRIV_KERNEL; + case BRBINFx_EL1_EL_EL2: + if (is_kernel_in_hyp_mode()) + return PERF_BR_PRIV_KERNEL; + return PERF_BR_PRIV_HV; + default: + pr_warn_once("%d - unknown branch privilege captured\n", brbe_el); + return PERF_BR_PRIV_UNKNOWN; + } +} + +static void capture_brbe_flags(struct perf_branch_entry *entry, struct perf_event *event, + u64 brbinf) +{ + brbe_set_perf_entry_type(entry, brbinf); + + if (!branch_sample_no_cycles(event)) + entry->cycles = brbe_get_cycles(brbinf); + + if (!branch_sample_no_flags(event)) { + /* + * BRBINFx_EL1.LASTFAILED indicates that a TME transaction failed (or + * was cancelled) prior to this record, and some number of records + * prior to this one, may have been generated during an attempt to + * execute the transaction. + */ + entry->abort = brbe_get_lastfailed(brbinf); + + /* + * All these information (i.e transaction state and mispredicts) + * are available for source only and complete branch records. + */ + if (brbe_record_is_complete(brbinf) || + brbe_record_is_source_only(brbinf)) { + entry->mispred = brbe_get_mispredict(brbinf); + entry->predicted = !entry->mispred; + entry->in_tx = brbe_get_in_tx(brbinf); + } + + /* + * Currently TME feature is neither implemented in any hardware + * nor it is being supported in the kernel. Just warn here once + * if TME related information shows up rather unexpectedly. + */ + if (entry->abort || entry->in_tx) + pr_warn_once("Unknown transaction states %d %d\n", + entry->abort, entry->in_tx); + } + + /* + * All these information (i.e branch privilege level) are + * available for target only and complete branch records. + */ + if (brbe_record_is_complete(brbinf) || + brbe_record_is_target_only(brbinf)) + entry->priv = brbe_get_perf_priv(brbinf); +} + +static void brbe_regset_branch_entries(struct pmu_hw_events *cpuc, struct perf_event *event, + struct brbe_regset *regset, int idx) +{ + struct perf_branch_entry *entry = &cpuc->branches->branch_entries[idx]; + u64 brbinf = regset[idx].brbinf; + + perf_clear_branch_entry_bitfields(entry); + if (brbe_record_is_complete(brbinf)) { + entry->from = regset[idx].brbsrc; + entry->to = regset[idx].brbtgt; + } else if (brbe_record_is_source_only(brbinf)) { + entry->from = regset[idx].brbsrc; + entry->to = 0; + } else if (brbe_record_is_target_only(brbinf)) { + entry->from = 0; + entry->to = regset[idx].brbtgt; + } + capture_brbe_flags(entry, event, brbinf); +} + +static void process_branch_entries(struct pmu_hw_events *cpuc, struct perf_event *event, + struct brbe_regset *regset, int nr_regset) +{ + int idx; + + for (idx = 0; idx < nr_regset; idx++) + brbe_regset_branch_entries(cpuc, event, regset, idx); + + cpuc->branches->branch_stack.nr = nr_regset; + cpuc->branches->branch_stack.hw_idx = -1ULL; +} + +void armv8pmu_branch_read(struct pmu_hw_events *cpuc, struct perf_event *event) +{ + struct arm64_perf_task_context *task_ctx = event->pmu_ctx->task_ctx_data; + struct brbe_regset live[BRBE_MAX_ENTRIES]; + int nr_live, nr_store, nr_hw_entries; + + nr_hw_entries = brbe_get_numrec(cpuc->percpu_pmu->reg_brbidr); + nr_live = capture_brbe_regset(live, nr_hw_entries); + if (event->ctx->task) { + nr_store = task_ctx->nr_brbe_records; + nr_store = stitch_stored_live_entries(task_ctx->store, live, nr_store, + nr_live, nr_hw_entries); + process_branch_entries(cpuc, event, task_ctx->store, nr_store); + task_ctx->nr_brbe_records = 0; + } else { + process_branch_entries(cpuc, event, live, nr_live); + } +} + +static bool filter_branch_privilege(struct perf_branch_entry *entry, u64 branch_sample_type) +{ + /* + * Retrieve the privilege level branch filter requests + * from the overall branch sample type. + */ + branch_sample_type &= PERF_SAMPLE_BRANCH_PLM_ALL; + + /* + * The privilege information do not always get captured + * successfully for given BRBE branch record. Hence the + * entry->priv could be analyzed for filtering when the + * information has really been captured. + */ + if (entry->priv) { + if (entry->priv == PERF_BR_PRIV_USER) { + if (!(branch_sample_type & PERF_SAMPLE_BRANCH_USER)) + return false; + } + + if (entry->priv == PERF_BR_PRIV_KERNEL) { + if (!(branch_sample_type & PERF_SAMPLE_BRANCH_KERNEL)) { + if (!is_kernel_in_hyp_mode()) + return false; + + if (!(branch_sample_type & PERF_SAMPLE_BRANCH_HV)) + return false; + } + } + + if (entry->priv == PERF_BR_PRIV_HV) { + /* + * PERF_SAMPLE_BRANCH_HV request actually gets configured + * similar to PERF_SAMPLE_BRANCH_KERNEL when kernel is in + * hyp mode. In that case PERF_BR_PRIV_KERNEL should have + * been reported for corresponding branch records. + */ + pr_warn_once("PERF_BR_PRIV_HV should not have been captured\n"); + } + return true; + } + + if (is_ttbr0_addr(entry->from) || is_ttbr0_addr(entry->to)) { + if (!(branch_sample_type & PERF_SAMPLE_BRANCH_USER)) + return false; + } + + if (is_ttbr1_addr(entry->from) || is_ttbr1_addr(entry->to)) { + if (!(branch_sample_type & PERF_SAMPLE_BRANCH_KERNEL)) { + if (!is_kernel_in_hyp_mode()) + return false; + + if (!(branch_sample_type & PERF_SAMPLE_BRANCH_HV)) + return false; + } + } + return true; +} + +static bool filter_branch_record(struct pmu_hw_events *cpuc, + struct perf_event *event, + struct perf_branch_entry *entry) +{ + struct arm64_perf_task_context *task_ctx = event->pmu_ctx->task_ctx_data; + u64 branch_sample = event->attr.branch_sample_type; + DECLARE_BITMAP(entry_type_mask, PERF_BR_ARM64_MAX); + DECLARE_BITMAP(event_type_mask, PERF_BR_ARM64_MAX); + + if (!filter_branch_privilege(entry, branch_sample)) + return false; + + if (entry->type == PERF_BR_UNKNOWN) + return true; + + if (branch_sample & PERF_SAMPLE_BRANCH_ANY) + return true; + + /* + * Both PMU and event branch filters match here except the privilege + * filters - which have already been tested earlier. Skip functional + * branch type test and just return success. + */ + if ((cpuc->branch_sample_type & ~PERF_SAMPLE_BRANCH_PLM_ALL) == + event->attr.branch_sample_type) + return true; + + branch_entry_mask(entry, entry_type_mask); + if (task_ctx) + return bitmap_subset(entry_type_mask, task_ctx->br_type_mask, PERF_BR_ARM64_MAX); + + prepare_event_branch_type_mask(event, event_type_mask); + return bitmap_subset(entry_type_mask, event_type_mask, PERF_BR_ARM64_MAX); +} + +void arm64_filter_branch_records(struct pmu_hw_events *cpuc, + struct perf_event *event, + struct branch_records *event_records) +{ + struct perf_branch_entry *entry; + int idx, count = 0; + + memset(event_records, 0, sizeof(*event_records)); + for (idx = 0; idx < cpuc->branches->branch_stack.nr; idx++) { + entry = &cpuc->branches->branch_entries[idx]; + if (!filter_branch_record(cpuc, event, entry)) + continue; + + memcpy(&event_records->branch_entries[count], entry, sizeof(*entry)); + count++; + } + event_records->branch_stack.nr = count; +} diff --git a/drivers/perf/arm_pmuv3.c b/drivers/perf/arm_pmuv3.c index 21ea93740f65..baa700ab5e03 100644 --- a/drivers/perf/arm_pmuv3.c +++ b/drivers/perf/arm_pmuv3.c @@ -26,6 +26,7 @@ #include <linux/nmi.h>
#include <asm/arm_pmuv3.h> +#include "arm_pmuv3_branch.h"
/* ARMv8 Cortex-A53 specific event types. */ #define ARMV8_A53_PERFCTR_PREF_LINEFILL 0xC2 @@ -834,14 +835,70 @@ static void armv8pmu_start(struct arm_pmu *cpu_pmu) armv8pmu_pmcr_write(armv8pmu_pmcr_read() | ARMV8_PMU_PMCR_E);
kvm_vcpu_pmu_resync_el0(); + if (cpu_pmu->has_branch_stack) + armv8pmu_branch_enable(cpu_pmu); }
static void armv8pmu_stop(struct arm_pmu *cpu_pmu) { + if (cpu_pmu->has_branch_stack) + armv8pmu_branch_disable(); + /* Disable all counters */ armv8pmu_pmcr_write(armv8pmu_pmcr_read() & ~ARMV8_PMU_PMCR_E); }
+static void read_branch_records(struct pmu_hw_events *cpuc, + struct perf_event *event, + struct perf_sample_data *data, + bool *branch_captured) +{ + struct branch_records event_records; + + /* + * CPU specific branch records buffer must have been allocated already + * for the hardware records to be captured and processed further. + */ + if (WARN_ON(!cpuc->branches)) + return; + + /* + * When the current task context does not match with the PMU overflown + * event, the captured branch records here cannot be co-related to the + * overflowed event. Report to the user - as if no branch records have + * been captured, and flush branch records. + */ + if (event->ctx->task && (cpuc->branch_context != event->ctx)) + return; + + /* + * Read the branch records from the hardware once after the PMU IRQ + * has been triggered but subsequently same records can be used for + * other events that might have been overflowed simultaneously thus + * saving much CPU cycles. + */ + if (!*branch_captured) { + armv8pmu_branch_read(cpuc, event); + *branch_captured = true; + } + + /* + * Filter captured branch records + * + * PMU captured branch records would contain samples applicable for + * the aggregated branch filters, for all events that got scheduled + * on this PMU simultaneously. Hence these branch records need to + * be filtered first so that each individual event get samples they + * had requested originally. + */ + if (cpuc->branch_sample_type != event->attr.branch_sample_type) { + arm64_filter_branch_records(cpuc, event, &event_records); + perf_sample_save_brstack(data, event, &event_records.branch_stack, NULL); + return; + } + perf_sample_save_brstack(data, event, &cpuc->branches->branch_stack, NULL); +} + static irqreturn_t armv8pmu_handle_irq(struct arm_pmu *cpu_pmu) { u32 pmovsr; @@ -849,6 +906,7 @@ static irqreturn_t armv8pmu_handle_irq(struct arm_pmu *cpu_pmu) struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events); struct pt_regs *regs; int idx; + bool branch_captured = false;
/* * Get and reset the IRQ flags @@ -892,6 +950,13 @@ static irqreturn_t armv8pmu_handle_irq(struct arm_pmu *cpu_pmu) if (!armpmu_event_set_period(event)) continue;
+ /* + * PMU IRQ should remain asserted until all branch records + * are captured and processed into struct perf_sample_data. + */ + if (has_branch_stack(event) && cpu_pmu->has_branch_stack) + read_branch_records(cpuc, event, &data, &branch_captured); + /* * Perf event overflow will queue the processing of the event as * an irq_work which will be taken care of in the handling of @@ -901,6 +966,8 @@ static irqreturn_t armv8pmu_handle_irq(struct arm_pmu *cpu_pmu) cpu_pmu->disable(event); } armv8pmu_start(cpu_pmu); + if (cpu_pmu->has_branch_stack) + armv8pmu_branch_stack_reset();
return IRQ_HANDLED; } @@ -991,6 +1058,40 @@ static int armv8pmu_user_event_idx(struct perf_event *event) return event->hw.idx; }
+static bool armv8pmu_branch_stack_init(struct perf_event *event) +{ + if (armv8pmu_branch_attr_valid(event)) { + /* + * If a task gets scheduled out, the current branch records + * get saved in the task's context data, which can be later + * used to fill in the records upon an event overflow. Let's + * enable PERF_ATTACH_TASK_DATA in 'event->attach_state' for + * all branch stack sampling perf events. + */ + event->attach_state |= PERF_ATTACH_TASK_DATA; + return true; + } + return false; +} + +static void armv8pmu_sched_task(struct perf_event_pmu_context *pmu_ctx, bool sched_in) +{ + struct arm_pmu *armpmu = to_arm_pmu(pmu_ctx->pmu); + void *task_ctx = pmu_ctx->task_ctx_data; + + if (armpmu->has_branch_stack) { + /* Save branch records in task_ctx on sched out */ + if (task_ctx && !sched_in) { + armv8pmu_branch_save(armpmu, task_ctx); + return; + } + + /* Reset branch records on sched in */ + if (sched_in) + armv8pmu_branch_stack_reset(); + } +} + /* * Add an event filter to a given event. */ @@ -1083,6 +1184,9 @@ static void armv8pmu_reset(void *info) pmcr |= ARMV8_PMU_PMCR_LP;
armv8pmu_pmcr_write(pmcr); + + if (cpu_pmu->has_branch_stack) + armv8pmu_branch_stack_reset(); }
static int __armv8_pmuv3_map_event_id(struct arm_pmu *armpmu, @@ -1235,6 +1339,41 @@ static void __armv8pmu_probe_pmu(void *info) cpu_pmu->reg_pmmir = read_pmmir(); else cpu_pmu->reg_pmmir = 0; + + /* + * BRBE is being probed on a single cpu for a + * given PMU. The remaining cpus, are assumed + * to have the exact same BRBE implementation. + */ + armv8pmu_branch_probe(cpu_pmu); +} + +static int branch_records_alloc(struct arm_pmu *armpmu) +{ + struct branch_records __percpu *records; + int cpu; + + records = alloc_percpu_gfp(struct branch_records, GFP_KERNEL); + if (!records) + return -ENOMEM; + + /* + * percpu memory allocated for 'records' gets completely consumed + * here, and never required to be freed up later. So permanently + * losing access to this anchor i.e 'records' is acceptable. + * + * Otherwise this allocation handle would have to be saved up for + * free_percpu() release later if required. + */ + for_each_possible_cpu(cpu) { + struct pmu_hw_events *events_cpu; + struct branch_records *records_cpu; + + events_cpu = per_cpu_ptr(armpmu->hw_events, cpu); + records_cpu = per_cpu_ptr(records, cpu); + events_cpu->branches = records_cpu; + } + return 0; }
static int armv8pmu_probe_pmu(struct arm_pmu *cpu_pmu) @@ -1251,7 +1390,21 @@ static int armv8pmu_probe_pmu(struct arm_pmu *cpu_pmu) if (ret) return ret;
- return probe.present ? 0 : -ENODEV; + if (!probe.present) + return -ENODEV; + + if (cpu_pmu->has_branch_stack) { + ret = armv8pmu_task_ctx_cache_alloc(cpu_pmu); + if (ret) + return ret; + + ret = branch_records_alloc(cpu_pmu); + if (ret) { + armv8pmu_task_ctx_cache_free(cpu_pmu); + return ret; + } + } + return 0; }
static void armv8pmu_disable_user_access_ipi(void *unused) @@ -1311,6 +1464,11 @@ static int armv8_pmu_init(struct arm_pmu *cpu_pmu, char *name, cpu_pmu->set_event_filter = armv8pmu_set_event_filter;
cpu_pmu->pmu.event_idx = armv8pmu_user_event_idx; + cpu_pmu->sched_task = armv8pmu_sched_task; + cpu_pmu->branch_stack_init = armv8pmu_branch_stack_init; + cpu_pmu->branch_stack_add = armv8pmu_branch_stack_add; + cpu_pmu->branch_stack_del = armv8pmu_branch_stack_del; + cpu_pmu->branch_stack_reset = armv8pmu_branch_stack_reset;
cpu_pmu->name = name; cpu_pmu->map_event = map_event; diff --git a/drivers/perf/arm_pmuv3_branch.h b/drivers/perf/arm_pmuv3_branch.h new file mode 100644 index 000000000000..4142da38cfb5 --- /dev/null +++ b/drivers/perf/arm_pmuv3_branch.h @@ -0,0 +1,83 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Branch Record Buffer Extension Helpers. + * + * Copyright (C) 2022-2023 ARM Limited + * + * Author: Anshuman Khandual anshuman.khandual@arm.com + */ +#include <linux/perf/arm_pmu.h> + +#ifdef CONFIG_ARM64_BRBE +void armv8pmu_branch_stack_add(struct perf_event *event, struct pmu_hw_events *cpuc); +void armv8pmu_branch_stack_del(struct perf_event *event, struct pmu_hw_events *cpuc); +void armv8pmu_branch_stack_reset(void); +void armv8pmu_branch_probe(struct arm_pmu *arm_pmu); +bool armv8pmu_branch_attr_valid(struct perf_event *event); +void armv8pmu_branch_enable(struct arm_pmu *arm_pmu); +void armv8pmu_branch_disable(void); +void armv8pmu_branch_read(struct pmu_hw_events *cpuc, + struct perf_event *event); +void arm64_filter_branch_records(struct pmu_hw_events *cpuc, + struct perf_event *event, + struct branch_records *event_records); +void armv8pmu_branch_save(struct arm_pmu *arm_pmu, void *ctx); +int armv8pmu_task_ctx_cache_alloc(struct arm_pmu *arm_pmu); +void armv8pmu_task_ctx_cache_free(struct arm_pmu *arm_pmu); +#else +static inline void armv8pmu_branch_stack_add(struct perf_event *event, struct pmu_hw_events *cpuc) +{ +} + +static inline void armv8pmu_branch_stack_del(struct perf_event *event, struct pmu_hw_events *cpuc) +{ +} + +static inline void armv8pmu_branch_stack_reset(void) +{ +} + +static inline void armv8pmu_branch_probe(struct arm_pmu *arm_pmu) +{ +} + +static inline bool armv8pmu_branch_attr_valid(struct perf_event *event) +{ + WARN_ON_ONCE(!has_branch_stack(event)); + return false; +} + +static inline void armv8pmu_branch_enable(struct arm_pmu *arm_pmu) +{ +} + +static inline void armv8pmu_branch_disable(void) +{ +} + +static inline void armv8pmu_branch_read(struct pmu_hw_events *cpuc, + struct perf_event *event) +{ + WARN_ON_ONCE(!has_branch_stack(event)); +} + +static inline void arm64_filter_branch_records(struct pmu_hw_events *cpuc, + struct perf_event *event, + struct branch_records *event_records) +{ + +} + +static inline void armv8pmu_branch_save(struct arm_pmu *arm_pmu, void *ctx) +{ +} + +static inline int armv8pmu_task_ctx_cache_alloc(struct arm_pmu *arm_pmu) +{ + return 0; +} + +static inline void armv8pmu_task_ctx_cache_free(struct arm_pmu *arm_pmu) +{ +} +#endif diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h index 9afe17653c5a..47e07e3db6a4 100644 --- a/include/linux/perf/arm_pmu.h +++ b/include/linux/perf/arm_pmu.h @@ -147,6 +147,11 @@ struct arm_pmu { /* store the PMMIR_EL1 to expose slots */ u64 reg_pmmir;
+#ifdef CONFIG_ARM64_BRBE + /* store the BRBIDR0_EL1 capturing attributes */ + u64 reg_brbidr; +#endif + /* Only to be used by ACPI probing code */ unsigned long acpi_cpuid; };
From: Anshuman Khandual anshuman.khandual@arm.com
maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8EC9K CVE: NA
Reference: https://lore.kernel.org/linux-arm-kernel/20240613061731.3109448-1-anshuman.k...
--------------------------------
Disable the BRBE before we enter the guest, saving the status and enable it back once we get out of the guest. This avoids capturing branch records in the guest kernel or userspace, which would be confusing the host samples.
Cc: Marc Zyngier maz@kernel.org Cc: Oliver Upton oliver.upton@linux.dev Cc: James Morse james.morse@arm.com Cc: Suzuki K Poulose suzuki.poulose@arm.com Cc: Catalin Marinas catalin.marinas@arm.com Cc: Will Deacon will@kernel.org Cc: kvmarm@lists.linux.dev Cc: linux-arm-kernel@lists.infradead.org CC: linux-kernel@vger.kernel.org Signed-off-by: Anshuman Khandual anshuman.khandual@arm.com Signed-off-by: Junhao He hejunhao3@huawei.com --- arch/arm64/include/asm/kvm_host.h | 3 +++ arch/arm64/kvm/debug.c | 5 +++++ arch/arm64/kvm/hyp/nvhe/debug-sr.c | 31 ++++++++++++++++++++++++++++++ 3 files changed, 39 insertions(+)
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index a4a21911a78a..b5c2c1fa75e5 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -568,6 +568,7 @@ struct kvm_vcpu_arch { u64 pmscr_el1; /* Self-hosted trace */ u64 trfcr_el1; + u64 brbcr_el1; } host_debug_state;
/* VGIC state */ @@ -755,6 +756,8 @@ struct kvm_vcpu_arch { #define DEBUG_STATE_SAVE_SPE __vcpu_single_flag(iflags, BIT(5)) /* Save TRBE context if active */ #define DEBUG_STATE_SAVE_TRBE __vcpu_single_flag(iflags, BIT(6)) +/* Save BRBE context if active */ +#define DEBUG_STATE_SAVE_BRBE __vcpu_single_flag(iflags, BIT(7))
/* SVE enabled for host EL0 */ #define HOST_SVE_ENABLED __vcpu_single_flag(sflags, BIT(0)) diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c index 8725291cb00a..99f85d8acbf3 100644 --- a/arch/arm64/kvm/debug.c +++ b/arch/arm64/kvm/debug.c @@ -335,10 +335,15 @@ void kvm_arch_vcpu_load_debug_state_flags(struct kvm_vcpu *vcpu) if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_TraceBuffer_SHIFT) && !(read_sysreg_s(SYS_TRBIDR_EL1) & TRBIDR_EL1_P)) vcpu_set_flag(vcpu, DEBUG_STATE_SAVE_TRBE); + + /* Check if we have BRBE implemented and available at the host */ + if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_BRBE_SHIFT)) + vcpu_set_flag(vcpu, DEBUG_STATE_SAVE_BRBE); }
void kvm_arch_vcpu_put_debug_state_flags(struct kvm_vcpu *vcpu) { vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_SPE); vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_TRBE); + vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_BRBE); } diff --git a/arch/arm64/kvm/hyp/nvhe/debug-sr.c b/arch/arm64/kvm/hyp/nvhe/debug-sr.c index 7746ea507b6f..a6dec3646afc 100644 --- a/arch/arm64/kvm/hyp/nvhe/debug-sr.c +++ b/arch/arm64/kvm/hyp/nvhe/debug-sr.c @@ -79,6 +79,32 @@ static void __debug_restore_trace(u64 trfcr_el1) write_sysreg_el1(trfcr_el1, SYS_TRFCR); }
+static void __debug_save_brbe(u64 *brbcr_el1) +{ + *brbcr_el1 = 0; + + /* Check if the BRBE is enabled */ + if (!(read_sysreg_el1(SYS_BRBCR) & (BRBCR_ELx_E0BRE | BRBCR_ELx_ExBRE))) + return; + + /* + * Prohibit branch record generation while we are in guest. + * Since access to BRBCR_EL1 is trapped, the guest can't + * modify the filtering set by the host. + */ + *brbcr_el1 = read_sysreg_el1(SYS_BRBCR); + write_sysreg_el1(0, SYS_BRBCR); +} + +static void __debug_restore_brbe(u64 brbcr_el1) +{ + if (!brbcr_el1) + return; + + /* Restore BRBE controls */ + write_sysreg_el1(brbcr_el1, SYS_BRBCR); +} + void __debug_save_host_buffers_nvhe(struct kvm_vcpu *vcpu) { /* Disable and flush SPE data generation */ @@ -87,6 +113,9 @@ void __debug_save_host_buffers_nvhe(struct kvm_vcpu *vcpu) /* Disable and flush Self-Hosted Trace generation */ if (vcpu_get_flag(vcpu, DEBUG_STATE_SAVE_TRBE)) __debug_save_trace(&vcpu->arch.host_debug_state.trfcr_el1); + /* Disable BRBE branch records */ + if (vcpu_get_flag(vcpu, DEBUG_STATE_SAVE_BRBE)) + __debug_save_brbe(&vcpu->arch.host_debug_state.brbcr_el1); }
void __debug_switch_to_guest(struct kvm_vcpu *vcpu) @@ -100,6 +129,8 @@ void __debug_restore_host_buffers_nvhe(struct kvm_vcpu *vcpu) __debug_restore_spe(vcpu->arch.host_debug_state.pmscr_el1); if (vcpu_get_flag(vcpu, DEBUG_STATE_SAVE_TRBE)) __debug_restore_trace(vcpu->arch.host_debug_state.trfcr_el1); + if (vcpu_get_flag(vcpu, DEBUG_STATE_SAVE_BRBE)) + __debug_restore_brbe(vcpu->arch.host_debug_state.brbcr_el1); }
void __debug_switch_to_host(struct kvm_vcpu *vcpu)
From: James Clark james.clark@arm.com
maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8EC9K CVE: NA
Reference: https://lore.kernel.org/linux-arm-kernel/20240613061731.3109448-1-anshuman.k...
--------------------------------
The test runs quite slowly in the model, so replace "xargs -n1" with "tr ' ' '\n'" which does the same thing but in single digit minutes instead of double digit minutes.
Also reduce the number of loops in the test application. Unfortunately this causes intermittent failures on x86, presumably because the sampling interval is too big to pickup any loops, so keep it the same there.
Cc: Mark Rutland mark.rutland@arm.com Cc: Arnaldo Carvalho de Melo acme@kernel.org Cc: linux-perf-users@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: James Clark james.clark@arm.com Signed-off-by: Anshuman Khandual anshuman.khandual@arm.com Signed-off-by: Junhao He hejunhao3@huawei.com --- tools/perf/tests/shell/test_brstack.sh | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/tools/perf/tests/shell/test_brstack.sh b/tools/perf/tests/shell/test_brstack.sh index 09908d71c994..283c9a902bbf 100755 --- a/tools/perf/tests/shell/test_brstack.sh +++ b/tools/perf/tests/shell/test_brstack.sh @@ -12,7 +12,6 @@ if ! perf record -o- --no-buildid --branch-filter any,save_type,u -- true > /dev fi
TMPDIR=$(mktemp -d /tmp/__perf_test.program.XXXXX) -TESTPROG="perf test -w brstack"
cleanup() { rm -rf $TMPDIR @@ -20,11 +19,21 @@ cleanup() {
trap cleanup EXIT TERM INT
+is_arm64() { + uname -m | grep -q aarch64 +} + +if is_arm64; then + TESTPROG="perf test -w brstack 5000" +else + TESTPROG="perf test -w brstack" +fi + test_user_branches() { echo "Testing user branch stack sampling"
perf record -o $TMPDIR/perf.data --branch-filter any,save_type,u -- ${TESTPROG} > /dev/null 2>&1 - perf script -i $TMPDIR/perf.data --fields brstacksym | xargs -n1 > $TMPDIR/perf.script + perf script -i $TMPDIR/perf.data --fields brstacksym | tr ' ' '\n' > $TMPDIR/perf.script
# example of branch entries: # brstack_foo+0x14/brstack_bar+0x40/P/-/-/0/CALL @@ -53,7 +62,7 @@ test_filter() { echo "Testing branch stack filtering permutation ($test_filter_filter,$test_filter_expect)"
perf record -o $TMPDIR/perf.data --branch-filter $test_filter_filter,save_type,u -- ${TESTPROG} > /dev/null 2>&1 - perf script -i $TMPDIR/perf.data --fields brstack | xargs -n1 > $TMPDIR/perf.script + perf script -i $TMPDIR/perf.data --fields brstack | tr ' ' '\n' > $TMPDIR/perf.script
# fail if we find any branch type that doesn't match any of the expected ones # also consider UNKNOWN branch types (-)
From: James Clark james.clark@arm.com
maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8EC9K CVE: NA
Reference: https://lore.kernel.org/linux-arm-kernel/20240613061731.3109448-1-anshuman.k...
--------------------------------
In the perf script command, spaces are turned into newlines. But when there is a double space this results in empty lines which fail the following inverse grep test, so strip the empty lines.
Cc: Mark Rutland mark.rutland@arm.com Cc: Arnaldo Carvalho de Melo acme@kernel.org Cc: linux-perf-users@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: James Clark james.clark@arm.com Signed-off-by: Anshuman Khandual anshuman.khandual@arm.com Signed-off-by: Junhao He hejunhao3@huawei.com --- tools/perf/tests/shell/test_brstack.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/tests/shell/test_brstack.sh b/tools/perf/tests/shell/test_brstack.sh index 283c9a902bbf..b1fe29bb71b3 100755 --- a/tools/perf/tests/shell/test_brstack.sh +++ b/tools/perf/tests/shell/test_brstack.sh @@ -62,7 +62,7 @@ test_filter() { echo "Testing branch stack filtering permutation ($test_filter_filter,$test_filter_expect)"
perf record -o $TMPDIR/perf.data --branch-filter $test_filter_filter,save_type,u -- ${TESTPROG} > /dev/null 2>&1 - perf script -i $TMPDIR/perf.data --fields brstack | tr ' ' '\n' > $TMPDIR/perf.script + perf script -i $TMPDIR/perf.data --fields brstack | tr ' ' '\n' | sed '/^[[:space:]]*$/d' > $TMPDIR/perf.script
# fail if we find any branch type that doesn't match any of the expected ones # also consider UNKNOWN branch types (-)
From: James Clark james.clark@arm.com
maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8EC9K CVE: NA
Reference: https://lore.kernel.org/linux-arm-kernel/20240613061731.3109448-1-anshuman.k...
--------------------------------
Add Arm64 BRBE-specific testing to the existing branch stack sampling test. The test currently passes on the Arm FVP RevC model, but no hardware has been tested yet.
Cc: Mark Rutland mark.rutland@arm.com Cc: Arnaldo Carvalho de Melo acme@kernel.org Cc: linux-perf-users@vger.kernel.org Cc: linux-kernel@vger.kernel.org Co-developed-by: German Gomez german.gomez@arm.com Signed-off-by: German Gomez german.gomez@arm.com Signed-off-by: James Clark james.clark@arm.com Signed-off-by: Anshuman Khandual anshuman.khandual@arm.com Signed-off-by: Junhao He hejunhao3@huawei.com --- tools/perf/tests/builtin-test.c | 1 + tools/perf/tests/shell/test_brstack.sh | 42 ++++++++++++++++++++++++-- tools/perf/tests/tests.h | 1 + tools/perf/tests/workloads/Build | 2 ++ tools/perf/tests/workloads/traploop.c | 39 ++++++++++++++++++++++++ 5 files changed, 82 insertions(+), 3 deletions(-) create mode 100644 tools/perf/tests/workloads/traploop.c
diff --git a/tools/perf/tests/builtin-test.c b/tools/perf/tests/builtin-test.c index cb6f1dd00dc4..7d9e0a311ef9 100644 --- a/tools/perf/tests/builtin-test.c +++ b/tools/perf/tests/builtin-test.c @@ -139,6 +139,7 @@ static struct test_workload *workloads[] = { &workload__sqrtloop, &workload__brstack, &workload__datasym, + &workload__traploop };
static int num_subtests(const struct test_suite *t) diff --git a/tools/perf/tests/shell/test_brstack.sh b/tools/perf/tests/shell/test_brstack.sh index b1fe29bb71b3..b0c96bfae304 100755 --- a/tools/perf/tests/shell/test_brstack.sh +++ b/tools/perf/tests/shell/test_brstack.sh @@ -47,12 +47,43 @@ test_user_branches() { grep -E -m1 "^brstack_foo+[^ ]*/brstack_bench+[^ ]*/RET/.*$" $TMPDIR/perf.script grep -E -m1 "^brstack_bench+[^ ]*/brstack_bench+[^ ]*/COND/.*$" $TMPDIR/perf.script grep -E -m1 "^brstack+[^ ]*/brstack+[^ ]*/UNCOND/.*$" $TMPDIR/perf.script + + if is_arm64; then + # in arm64 with BRBE, we get IRQ entries that correspond + # to any point in the process + grep -m1 "/IRQ/" $TMPDIR/perf.script + fi set +x
# some branch types are still not being tested: # IND COND_CALL COND_RET SYSCALL SYSRET IRQ SERROR NO_TX }
+test_arm64_trap_eret_branches() { + echo "Testing trap & eret branches (arm64 brbe)" + perf record -o $TMPDIR/perf.data --branch-filter any,save_type,u -- \ + perf test -w traploop 250 + perf script -i $TMPDIR/perf.data --fields brstacksym | tr ' ' '\n' > $TMPDIR/perf.script + set -x + # BRBINF<n>.TYPE == TRAP are mapped to PERF_BR_SYSCALL by the BRBE driver + grep -E -m1 "^trap_bench+[^ ]*/[unknown][^ ]*/SYSCALL/" $TMPDIR/perf.script + grep -E -m1 "^[unknown][^ ]*/trap_bench+[^ ]*/ERET/" $TMPDIR/perf.script + set +x +} + +test_arm64_kernel_branches() { + echo "Testing kernel branches (arm64 brbe)" + # skip if perf doesn't have enough privileges + if ! perf record --branch-filter any,k -o- -- true > /dev/null; then + echo "[skipped: not enough privileges]" + return 0 + fi + perf record -o $TMPDIR/perf.data --branch-filter any,k -- uname -a + perf script -i $TMPDIR/perf.data --fields brstack | tr ' ' '\n' > $TMPDIR/perf.script + grep -E -m1 "0xffff[0-9a-f]{12}" $TMPDIR/perf.script + ! egrep -E -m1 "0x0000[0-9a-f]{12}" $TMPDIR/perf.script +} + # first argument <arg0> is the argument passed to "--branch-stack <arg0>,save_type,u" # second argument are the expected branch types for the given filter test_filter() { @@ -75,11 +106,16 @@ set -e
test_user_branches
-test_filter "any_call" "CALL|IND_CALL|COND_CALL|SYSCALL|IRQ" +if is_arm64; then + test_arm64_trap_eret_branches + test_arm64_kernel_branches +fi + +test_filter "any_call" "CALL|IND_CALL|COND_CALL|SYSCALL|IRQ|FAULT_DATA|FAULT_INST" test_filter "call" "CALL|SYSCALL" test_filter "cond" "COND" test_filter "any_ret" "RET|COND_RET|SYSRET|ERET"
test_filter "call,cond" "CALL|SYSCALL|COND" -test_filter "any_call,cond" "CALL|IND_CALL|COND_CALL|IRQ|SYSCALL|COND" -test_filter "cond,any_call,any_ret" "COND|CALL|IND_CALL|COND_CALL|SYSCALL|IRQ|RET|COND_RET|SYSRET|ERET" +test_filter "any_call,cond" "CALL|IND_CALL|COND_CALL|IRQ|SYSCALL|COND|FAULT_DATA|FAULT_INST" +test_filter "cond,any_call,any_ret" "COND|CALL|IND_CALL|COND_CALL|SYSCALL|IRQ|RET|COND_RET|SYSRET|ERET|FAULT_DATA|FAULT_INST" diff --git a/tools/perf/tests/tests.h b/tools/perf/tests/tests.h index b394f3ac2d66..c65455da4eaf 100644 --- a/tools/perf/tests/tests.h +++ b/tools/perf/tests/tests.h @@ -205,6 +205,7 @@ DECLARE_WORKLOAD(leafloop); DECLARE_WORKLOAD(sqrtloop); DECLARE_WORKLOAD(brstack); DECLARE_WORKLOAD(datasym); +DECLARE_WORKLOAD(traploop);
extern const char *dso_to_test;
diff --git a/tools/perf/tests/workloads/Build b/tools/perf/tests/workloads/Build index a1f34d5861e3..a9dc93d8468b 100644 --- a/tools/perf/tests/workloads/Build +++ b/tools/perf/tests/workloads/Build @@ -6,8 +6,10 @@ perf-y += leafloop.o perf-y += sqrtloop.o perf-y += brstack.o perf-y += datasym.o +perf-y += traploop.o
CFLAGS_sqrtloop.o = -g -O0 -fno-inline -U_FORTIFY_SOURCE CFLAGS_leafloop.o = -g -O0 -fno-inline -fno-omit-frame-pointer -U_FORTIFY_SOURCE CFLAGS_brstack.o = -g -O0 -fno-inline -U_FORTIFY_SOURCE CFLAGS_datasym.o = -g -O0 -fno-inline -U_FORTIFY_SOURCE +CFLAGS_traploop.o = -g -O0 -fno-inline -U_FORTIFY_SOURCE diff --git a/tools/perf/tests/workloads/traploop.c b/tools/perf/tests/workloads/traploop.c new file mode 100644 index 000000000000..7dac94897e49 --- /dev/null +++ b/tools/perf/tests/workloads/traploop.c @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <stdlib.h> +#include "../tests.h" + +#define BENCH_RUNS 999999 + +static volatile int cnt; + +#ifdef __aarch64__ +static void trap_bench(void) +{ + unsigned long val; + + asm("mrs %0, ID_AA64ISAR0_EL1" : "=r" (val)); /* TRAP + ERET */ +} +#else +static void trap_bench(void) +{ + +} +#endif + +static int traploop(int argc, const char **argv) +{ + int num_loops = BENCH_RUNS; + + if (argc > 0) + num_loops = atoi(argv[0]); + + while (1) { + if ((cnt++) > num_loops) + break; + + trap_bench(); + } + return 0; +} + +DEFINE_WORKLOAD(traploop);
driver inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8EC9K CVE: NA
------------------------------------------
Enable branch stack sampling
Signed-off-by: Junhao He hejunhao3@huawei.com --- arch/arm64/configs/openeuler_defconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 45d9443367e1..967ab41d53dd 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -6836,6 +6836,7 @@ CONFIG_ARM_PMU=y CONFIG_ARM_PMU_ACPI=y CONFIG_ARM_SMMU_V3_PMU=m CONFIG_ARM_PMUV3=y +CONFIG_ARM64_BRBE=y # CONFIG_ARM_DSU_PMU is not set CONFIG_QCOM_L2_PMU=y CONFIG_QCOM_L3_PMU=y
反馈: 您发送到kernel@openeuler.org的补丁/补丁集,已成功转换为PR! PR链接地址: https://gitee.com/openeuler/kernel/pulls/11765 邮件列表地址:https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/Z...
FeedBack: The patch(es) which you have sent to kernel@openeuler.org mailing list has been converted to a pull request successfully! Pull request link: https://gitee.com/openeuler/kernel/pulls/11765 Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/Z...