February 2021 - Linuxarm - mailweb.openeuler.org

[RFC PATCH 0/2] sched/topology: Get rid of overlapping groups
by Valentin Schneider 09 Feb '21

09 Feb '21

Hi folks, My keyboard still hasn't been taken away from me, so I went down and did what I was rambling about in [1]. The preemptive degeneration check is the worst wart, but I think I'll have to sleep on it before I can figure out a better way. Something tells me the increase in group numbers isn't going to make me any friends, so I've included 3/2 which is Barry's approach (with the subset check condensed in a single spot). Cheers, Valentin [1]: http://lore.kernel.org/r/jhj4kiu4hz8.mognet@arm.com Valentin Schneider (2): sched/topology: Get rid of NUMA overlapping groups Revert "sched/topology: Warn when NUMA diameter > 2" kernel/sched/topology.c | 77 +++++++++++++++++++++++------------------ 1 file changed, 43 insertions(+), 34 deletions(-) -- 2.27.0

2 8

[PATCH for-next 00/12] RDMA/hns: Updates for 5.12
by Weihang Li 09 Feb '21

09 Feb '21

As usual, this series collects some miscellaneous fixes and cleanups at the end of 5.12 for the hns driver: * #1 ~ #3 fix some non-urgent issues. * #4 ~ #6 make some changes on existing features. * #7 ~ #12 are cleanups, just do some refactor and delete dead code. This series is made based on the series named "RDMA/hns: Several fixes and cleanups of RQ/SRQ" which is still being reviewed: https://patchwork.kernel.org/project/linux-rdma/cover/1611997090-48820-1-gi… I'm worried that it will be too late for 5.12 if any patch of this series needs changes, so I send it before the previous one is merged. If there is any comment or merge conflict on it, I will fix them as soon as possible, thanks. Lang Cheng (3): RDMA/hns: Replace wmb&__raw_writeq with writeq RDMA/hns: Move HIP06 related definitions into hns_roce_hw_v1.h RDMA/hns: Avoid unnecessary memset on WQEs in post_send Lijun Ou (1): RDMA/hns: Disable RQ inline by default Weihang Li (2): RDMA/hns: Avoid filling sgid index when modifying QP to RTR RDMA/hns: Fix type of sq_signal_bits Xi Wang (1): RDMA/hns: Add mapped page count checking for MTR Xinhao Liu (2): RDMA/hns: Remove some magic numbers RDMA/hns: Delete redundant judgment when preparing descriptors Yixian Liu (1): RDMA/hns: Remove unnecessary wrap around for EQ's consumer index Yixing Liu (2): RDMA/hns: Adjust definition of FRMR fields RDMA/hns: Skip qp_flow_control_init() for HIP09 drivers/infiniband/hw/hns/hns_roce_device.h | 45 +--------- drivers/infiniband/hw/hns/hns_roce_hem.c | 9 +- drivers/infiniband/hw/hns/hns_roce_hw_v1.c | 31 +++---- drivers/infiniband/hw/hns/hns_roce_hw_v1.h | 43 ++++++++++ drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 125 +++++++++------------------- drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 12 +-- drivers/infiniband/hw/hns/hns_roce_main.c | 16 ---- drivers/infiniband/hw/hns/hns_roce_mr.c | 56 ++++++++----- 8 files changed, 148 insertions(+), 189 deletions(-) -- 2.8.1

3 15

[PATCH v1 0/2] irqchip/gic-v3-its: don't set bitmap for LPI which user didn't allocate
by Luo Jiaxing 09 Feb '21

09 Feb '21

When the number of online CPUs is less than 16, we found that it will fail to allocate 32 MSI interrupts (including 16 affinity interrupts) after the hisi_sas module is unloaded and then reloaded. After analysis, it is found that a bug exists when the ITS releases interrupt resources, and this patch set contains a bugfix patch and a patch for appending debugging information. Luo Jiaxing (2): irqchip/gic-v3-its: don't set bitmap for LPI which user didn't allocate genirq/msi: add an error print when __irq_domain_alloc_irqs() failed drivers/irqchip/irq-gic-v3-its.c | 4 ++++ kernel/irq/msi.c | 1 + 2 files changed, 5 insertions(+) -- 2.7.4

4 5

[PATCH net-next 00/12] net: hns3: some cleanups for -next
by Huazhong Tan 09 Feb '21

09 Feb '21

There are some cleanups for the HNS3 ethernet driver. Huazhong Tan (2): net: hns3: remove redundant return value of hns3_uninit_all_ring() net: hns3: remove an unused parameter in hclge_vf_rate_param_check() Jian Shen (2): net: hns3: remove redundant client_setup_tc handle net: hns3: cleanup for endian issue for VF RSS Jiaran Zhang (1): net: hns3: modify some unmacthed types print parameter Peng Li (4): net: hns3: remove the shaper param magic number net: hns3: change hclge_parse_speed() param type net: hns3: change hclge_query_bd_num() param type net: hns3: remove unused macro definition Yonglong Liu (1): net: hns3: clean up some incorrect variable types in hclge_dbg_dump_tm_map() Yufeng Mo (2): net: hns3: check cmdq message parameters sent from VF net: hns3: clean up unnecessary parentheses in macro definitions drivers/net/ethernet/hisilicon/hns3/hnae3.h | 7 +++-- drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 31 ++++------------------ drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 11 ++++---- drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 2 +- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 4 +-- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 27 ------------------- .../ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c | 11 ++++---- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c | 4 +-- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 21 ++++++++++----- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 5 +--- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 31 ++++++++++++++++++---- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 14 +++++----- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h | 6 ++--- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.h | 11 ++++---- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 19 ++++++++----- 16 files changed, 93 insertions(+), 113 deletions(-) -- 2.7.4

2 14

[dpdk-dev] [Question about 'rte_eth_tx_prepare']
by Chengchang Tang 09 Feb '21

09 Feb '21

Hi, Thomas Monjalon and Ferruh Yigit and others. I have some questions about 'rte_eth_tx_prepare'. When I use TSO offload in bond mode, the checksum error occurs. It is because the bond PMD does not implement 'tx_prepare'. So, it will not invoke the 'tx_prepare' of each PMDs to do prepare for the PMDs. I am not sure whether to add the 'tx_preapre' implementation for the bond PMD or put the process of pseudo header in the apps. And we are now designing the outer UDP cksum offload for HNS3 PMD. I find that many PMDs process these pseudo headers in 'tx_prepare', but does not process the pseudo header for outer UDP checksum offload. Instead, it is processed in csum forward mode of testpmd. Does this mean that the pseudo header should be completed by the apps and the apps does not need to call 'tx_prepare' to avoid repeated processing? (it seems not transplantable) If so, it seems that PMDs need to avoid doing this in 'tx_prepare'. Here are two questions: 1. What functions should be included in the 'tx_prepare' for PMDs? 2. Whether an app must invoke 'rte_eth_tx_prepare' or under which conditions an app must invoke the 'rte_eth_tx_prepare'? Thanks Chengchang Tang

3 3

[PATCH v2 for-next] RDMA/hns: Add support of direct wqe
by Weihang Li 09 Feb '21

09 Feb '21

From: Yixing Liu <liuyixing1(a)huawei.com> Direct wqe is a mechanism to fill wqe directly into the hardware. In the case of light load, the wqe will be filled into pcie bar space of the hardware, this will reduce one memory access operation and therefore reduce the latency. Signed-off-by: Yixing Liu <liuyixing1(a)huawei.com> Signed-off-by: Lang Cheng <chenglang(a)huawei.com> Signed-off-by: Weihang Li <liweihang(a)huawei.com> --- Changes since v1: * Delete an extra blank line. * Link: https://patchwork.kernel.org/project/linux-rdma/patch/1611395717-11081-1-gi… drivers/infiniband/hw/hns/hns_roce_device.h | 6 ++++ drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 44 ++++++++++++++++++++++++++++- drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 13 +++++++++ 3 files changed, 62 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_device.h b/drivers/infiniband/hw/hns/hns_roce_device.h index f62851f..907bf71 100644 --- a/drivers/infiniband/hw/hns/hns_roce_device.h +++ b/drivers/infiniband/hw/hns/hns_roce_device.h @@ -90,6 +90,7 @@ #define HNS_ROCE_MAX_PORTS 6 #define HNS_ROCE_GID_SIZE 16 #define HNS_ROCE_SGE_SIZE 16 +#define HNS_ROCE_DWQE_SIZE 65536 #define HNS_ROCE_HOP_NUM_0 0xff @@ -643,6 +644,10 @@ struct hns_roce_work { u32 queue_num; }; +enum { + HNS_ROCE_QP_CAP_DIRECT_WQE = BIT(5), +}; + struct hns_roce_qp { struct ib_qp ibqp; struct hns_roce_wq rq; @@ -984,6 +989,7 @@ struct hns_roce_dev { struct mutex pgdir_mutex; int irq[HNS_ROCE_MAX_IRQ_NUM]; u8 __iomem *reg_base; + void __iomem *mem_base; struct hns_roce_caps caps; struct xarray qp_table_xa; diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index a5bbfb1..8ae3317 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -503,6 +503,8 @@ static inline int set_ud_wqe(struct hns_roce_qp *qp, if (ret) return ret; + qp->sl = to_hr_ah(ud_wr(wr)->ah)->av.sl; + set_extend_sge(qp, wr->sg_list, &curr_idx, valid_num_sge); /* @@ -635,6 +637,8 @@ static inline void update_sq_db(struct hns_roce_dev *hr_dev, V2_DB_BYTE_4_TAG_S, qp->doorbell_qpn); roce_set_field(sq_db.byte_4, V2_DB_BYTE_4_CMD_M, V2_DB_BYTE_4_CMD_S, HNS_ROCE_V2_SQ_DB); + /* indicates data on new BAR, 0 : SQ doorbell, 1 : DWQE */ + roce_set_bit(sq_db.byte_4, V2_DB_FLAG_S, 0); roce_set_field(sq_db.parameter, V2_DB_PARAMETER_IDX_M, V2_DB_PARAMETER_IDX_S, qp->sq.head); roce_set_field(sq_db.parameter, V2_DB_PARAMETER_SL_M, @@ -644,6 +648,38 @@ static inline void update_sq_db(struct hns_roce_dev *hr_dev, } } +static void hns_roce_write512(struct hns_roce_dev *hr_dev, u64 *val, + u64 __iomem *dest) +{ +#define HNS_ROCE_WRITE_TIMES 8 + struct hns_roce_v2_priv *priv = (struct hns_roce_v2_priv *)hr_dev->priv; + struct hnae3_handle *handle = priv->handle; + const struct hnae3_ae_ops *ops = handle->ae_algo->ops; + int i; + + if (!hr_dev->dis_db && !ops->get_hw_reset_stat(handle)) + for (i = 0; i < HNS_ROCE_WRITE_TIMES; i++) + writeq_relaxed(*(val + i), dest + i); +} + +static void write_dwqe(struct hns_roce_dev *hr_dev, struct hns_roce_qp *qp, + void *wqe) +{ + struct hns_roce_v2_rc_send_wqe *rc_sq_wqe = wqe; + + /* All kinds of DirectWQE have the same header field layout */ + roce_set_bit(rc_sq_wqe->byte_4, V2_RC_SEND_WQE_BYTE_4_FLAG_S, 1); + roce_set_field(rc_sq_wqe->byte_4, V2_RC_SEND_WQE_BYTE_4_DB_SL_L_M, + V2_RC_SEND_WQE_BYTE_4_DB_SL_L_S, qp->sl); + roce_set_field(rc_sq_wqe->byte_4, V2_RC_SEND_WQE_BYTE_4_DB_SL_H_M, + V2_RC_SEND_WQE_BYTE_4_DB_SL_H_S, qp->sl >> 2); + roce_set_field(rc_sq_wqe->byte_4, V2_RC_SEND_WQE_BYTE_4_WQE_INDEX_M, + V2_RC_SEND_WQE_BYTE_4_WQE_INDEX_S, qp->sq.head); + + hns_roce_write512(hr_dev, wqe, hr_dev->mem_base + + HNS_ROCE_DWQE_SIZE * qp->ibqp.qp_num); +} + static int hns_roce_v2_post_send(struct ib_qp *ibqp, const struct ib_send_wr *wr, const struct ib_send_wr **bad_wr) @@ -710,7 +746,12 @@ static int hns_roce_v2_post_send(struct ib_qp *ibqp, qp->next_sge = sge_idx; /* Memory barrier */ wmb(); - update_sq_db(hr_dev, qp); + + if (nreq == 1 && qp->sq.head == qp->sq.tail + 1 && + (qp->en_flags & HNS_ROCE_QP_CAP_DIRECT_WQE)) + write_dwqe(hr_dev, qp, wqe); + else + update_sq_db(hr_dev, qp); } spin_unlock_irqrestore(&qp->sq.lock, flags); @@ -6273,6 +6314,7 @@ static void hns_roce_hw_v2_get_cfg(struct hns_roce_dev *hr_dev, /* Get info from NIC driver. */ hr_dev->reg_base = handle->rinfo.roce_io_base; + hr_dev->mem_base = handle->rinfo.roce_mem_base; hr_dev->caps.num_ports = 1; hr_dev->iboe.netdevs[0] = handle->rinfo.netdev; hr_dev->iboe.phy_port[0] = 0; diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.h b/drivers/infiniband/hw/hns/hns_roce_hw_v2.h index 69bc072..add1816 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.h +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.h @@ -1098,6 +1098,8 @@ struct hns_roce_v2_mpt_entry { #define V2_DB_BYTE_4_CMD_S 24 #define V2_DB_BYTE_4_CMD_M GENMASK(27, 24) +#define V2_DB_FLAG_S 31 + #define V2_DB_PARAMETER_IDX_S 0 #define V2_DB_PARAMETER_IDX_M GENMASK(15, 0) @@ -1194,6 +1196,15 @@ struct hns_roce_v2_rc_send_wqe { #define V2_RC_SEND_WQE_BYTE_4_OPCODE_S 0 #define V2_RC_SEND_WQE_BYTE_4_OPCODE_M GENMASK(4, 0) +#define V2_RC_SEND_WQE_BYTE_4_DB_SL_L_S 5 +#define V2_RC_SEND_WQE_BYTE_4_DB_SL_L_M GENMASK(6, 5) + +#define V2_RC_SEND_WQE_BYTE_4_DB_SL_H_S 13 +#define V2_RC_SEND_WQE_BYTE_4_DB_SL_H_M GENMASK(14, 13) + +#define V2_RC_SEND_WQE_BYTE_4_WQE_INDEX_S 15 +#define V2_RC_SEND_WQE_BYTE_4_WQE_INDEX_M GENMASK(30, 15) + #define V2_RC_SEND_WQE_BYTE_4_OWNER_S 7 #define V2_RC_SEND_WQE_BYTE_4_CQE_S 8 @@ -1216,6 +1227,8 @@ struct hns_roce_v2_rc_send_wqe { #define V2_RC_FRMR_WQE_BYTE_4_LW_S 23 +#define V2_RC_SEND_WQE_BYTE_4_FLAG_S 31 + #define V2_RC_SEND_WQE_BYTE_16_XRC_SRQN_S 0 #define V2_RC_SEND_WQE_BYTE_16_XRC_SRQN_M GENMASK(23, 0) -- 2.8.1

2 1

[PATCH for-next 00/12] RDMA/hns: Several fixes and cleanups of RQ/SRQ
by Weihang Li 09 Feb '21

09 Feb '21

There are some issues when using SRQ on HIP08/HIP09, the first part of this series is some fixes on them. In addition, the codes about RQ/SRQ including the creation and post recv flow are a bit hard to understand, they need to be refactored. Lang Cheng (2): RDMA/hns: Allocate one more recv SGE for HIP08 RDMA/hns: Use new interfaces to write SRQC Wenpeng Liang (8): RDMA/hns: Bugfix for checking whether the srq is full when post wr RDMA/hns: Force srq_limit to 0 when creating SRQ RDMA/hns: Fixed wrong judgments in the goto branch RDMA/hns: Remove the reserved WQE of SRQ RDMA/hns: Refactor hns_roce_create_srq() RDMA/hns: Refactor code about SRQ Context RDMA/hns: Refactor hns_roce_v2_post_srq_recv() RDMA/hns: Add verification of QP type when post_recv Xi Wang (2): RDMA/hns: Refactor post recv flow RDMA/hns: Clear remaining unused sges when post_recv drivers/infiniband/hw/hns/hns_roce_device.h | 16 +- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 407 +++++++++++++++------------- drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 72 +++-- drivers/infiniband/hw/hns/hns_roce_main.c | 3 +- drivers/infiniband/hw/hns/hns_roce_qp.c | 37 ++- drivers/infiniband/hw/hns/hns_roce_srq.c | 329 ++++++++++++---------- 6 files changed, 510 insertions(+), 354 deletions(-) -- 2.8.1

2 13

[PATCH] mmc: cavium: Replace spin_lock_irqsave with spin_lock in hard IRQ
by Xiaofei Tan 08 Feb '21

08 Feb '21

It is redundant to do irqsave and irqrestore in hardIRQ context, where it has been in a irq-disabled context. Signed-off-by: Xiaofei Tan <tanxiaofei(a)huawei.com> --- drivers/mmc/host/cavium.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/cavium.c b/drivers/mmc/host/cavium.c index c5da3aa..4bb8f28 100644 --- a/drivers/mmc/host/cavium.c +++ b/drivers/mmc/host/cavium.c @@ -436,12 +436,11 @@ irqreturn_t cvm_mmc_interrupt(int irq, void *dev_id) { struct cvm_mmc_host *host = dev_id; struct mmc_request *req; - unsigned long flags = 0; u64 emm_int, rsp_sts; bool host_done; if (host->need_irq_handler_lock) - spin_lock_irqsave(&host->irq_handler_lock, flags); + spin_lock(&host->irq_handler_lock); else __acquire(&host->irq_handler_lock); @@ -504,7 +503,7 @@ irqreturn_t cvm_mmc_interrupt(int irq, void *dev_id) host->release_bus(host); out: if (host->need_irq_handler_lock) - spin_unlock_irqrestore(&host->irq_handler_lock, flags); + spin_unlock(&host->irq_handler_lock); else __release(&host->irq_handler_lock); return IRQ_RETVAL(emm_int != 0); -- 2.8.1

2 1

[PATCH for-next 00/32] spin lock usage optimization for SCSI drivers
by Xiaofei Tan 07 Feb '21

07 Feb '21

Replace spin_lock_irqsave with spin_lock in hard IRQ of SCSI drivers. There are no function changes, but may speed up if interrupt happen too often. Xiaofei Tan (32): scsi: 53c700: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: ipr: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: lpfc: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: qla4xxx: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: BusLogic: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: a100u2w: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: a2091: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: a3000: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: aha1740: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: bfa: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: esp_scsi: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: gvp11: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: hptiop: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: ibmvscsi: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: initio: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: megaraid: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: mac53c94: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: mesh: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: mvumi: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: myrb: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: myrs: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: ncr53c8xx: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: nsp32: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: pmcraid: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: pcmcia: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: qlogicfas408: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: qlogicpti: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: sgiwd93: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: stex: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: vmw_pvscsi: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: wd719x: Replace spin_lock_irqsave with spin_lock in hard IRQ scsi: advansys: Replace spin_lock_irqsave with spin_lock in hard IRQ drivers/scsi/53c700.c | 5 ++-- drivers/scsi/BusLogic.c | 5 ++-- drivers/scsi/a100u2w.c | 5 ++-- drivers/scsi/a2091.c | 5 ++-- drivers/scsi/a3000.c | 5 ++-- drivers/scsi/advansys.c | 5 ++-- drivers/scsi/aha1740.c | 5 ++-- drivers/scsi/bfa/bfad.c | 20 ++++++------- drivers/scsi/esp_scsi.c | 5 ++-- drivers/scsi/gvp11.c | 5 ++-- drivers/scsi/hptiop.c | 5 ++-- drivers/scsi/ibmvscsi/ibmvfc.c | 5 ++-- drivers/scsi/initio.c | 5 ++-- drivers/scsi/ipr.c | 21 ++++++------- drivers/scsi/lpfc/lpfc_sli.c | 49 +++++++++++++------------------ drivers/scsi/mac53c94.c | 5 ++-- drivers/scsi/megaraid.c | 10 +++---- drivers/scsi/megaraid/megaraid_sas_base.c | 5 ++-- drivers/scsi/mesh.c | 5 ++-- drivers/scsi/mvumi.c | 7 ++--- drivers/scsi/myrb.c | 20 +++++-------- drivers/scsi/myrs.c | 15 ++++------ drivers/scsi/ncr53c8xx.c | 5 ++-- drivers/scsi/nsp32.c | 5 ++-- drivers/scsi/pcmcia/sym53c500_cs.c | 5 ++-- drivers/scsi/pmcraid.c | 8 ++--- drivers/scsi/qla4xxx/ql4_isr.c | 15 ++++------ drivers/scsi/qlogicfas408.c | 5 ++-- drivers/scsi/qlogicpti.c | 5 ++-- drivers/scsi/sgiwd93.c | 5 ++-- drivers/scsi/stex.c | 16 +++++----- drivers/scsi/vmw_pvscsi.c | 4 +-- drivers/scsi/wd719x.c | 7 ++--- 33 files changed, 122 insertions(+), 175 deletions(-) -- 2.8.1

1 32

[PATCH for-next 0/6] RDMA/hns: Fix and refactor CMDQ related code
by Weihang Li 07 Feb '21

07 Feb '21

Remove some dead code in process of CMDQ transmission, and fix an issue about missing error code. Lang Cheng (6): RDMA/hns: Remove unused member and variable of CMDQ RDMA/hns: Remove unsupported CMDQ mode RDMA/hns: Fixes missing error code of CMDQ RDMA/hns: Remove redundant operations on CMDQ RDMA/hns: Adjust fields and variables about CMDQ tail/head RDMA/hns: Refactor process of posting CMDQ drivers/infiniband/hw/hns/hns_roce_common.h | 4 +- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 142 ++++++++-------------------- drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 7 -- 3 files changed, 42 insertions(+), 111 deletions(-) -- 2.8.1

4 10