February 2021 - Linuxarm - mailweb.openeuler.org

[PATCH] sched/topology: fix the issue groups don't span domain->span for NUMA diameter > 2
by Barry Song 03 Feb '21

03 Feb '21

As long as NUMA diameter > 2, building sched_domain by sibling's child domain will definitely create a sched_domain with sched_group which will span out of the sched_domain: +------+ +------+ +-------+ +------+ | node | 12 |node | 20 | node | 12 |node | | 0 +---------+1 +--------+ 2 +-------+3 | +------+ +------+ +-------+ +------+ domain0 node0 node1 node2 node3 domain1 node0+1 node0+1 node2+3 node2+3 + domain2 node0+1+2 | group: node0+1 | group:node2+3 <-------------------+ when node2 is added into the domain2 of node0, kernel is using the child domain of node2's domain2, which is domain1(node2+3). Node 3 is outside the span of the domain including node0+1+2. This will make load_balance() run based on the avg_load in the sched_group spanning out of the sched_domain, and it also makes select_task_rq_fair() pick an idle CPU out of the sched_domain. Real servers which suffer from this problem include Kunpeng920 and 8-node Sun Fire X4600-M2, at least. Here we move to use the *child* domain of the *child* domain of node2's domain2 to build the sched_group. +------+ +------+ +-------+ +------+ | node | 12 |node | 20 | node | 12 |node | | 0 +---------+1 +--------+ 2 +-------+3 | +------+ +------+ +-------+ +------+ domain0 node0 node1 +- node2 node3 | domain1 node0+1 node0+1 | node2+3 node2+3 | domain2 node0+1+2 | group: node0+1 | group:node2 <-------------------+ A tricky thing is that we shouldn't use the sgc of the 1st CPU of node2 for the sched_group generated by grandchild, otherwise, when this cpu becomes the balance_cpu of another sched_group of cpus other than node0, our sched_group generated by grandchild will access the same sgc with the sched_group generated by child of another CPU. So in init_overlap_sched_group(), sgc's capacity be overwritten: build_balance_mask(sd, sg, mask); cpu = cpumask_first_and(sched_group_span(sg), mask); sg->sgc = *per_cpu_ptr(sdd->sgc, cpu); And WARN_ON_ONCE(!cpumask_equal(group_balance_mask(sg), mask)) will also be triggered: static void init_overlap_sched_group(struct sched_domain *sd, struct sched_group *sg) { if (atomic_inc_return(&sg->sgc->ref) == 1) cpumask_copy(group_balance_mask(sg), mask); else WARN_ON_ONCE(!cpumask_equal(group_balance_mask(sg), mask)); } So here move to use the sgc of the 2nd cpu. For the corner case, if NUMA has only one CPU, we will still trigger this WARN_ON_ONCE. But It is really unlikely to be a real case for one NUMA to have one CPU only. Tested by the below topology: qemu-system-aarch64 -M virt -nographic \ -smp cpus=8 \ -numa node,cpus=0-1,nodeid=0 \ -numa node,cpus=2-3,nodeid=1 \ -numa node,cpus=4-5,nodeid=2 \ -numa node,cpus=6-7,nodeid=3 \ -numa dist,src=0,dst=1,val=12 \ -numa dist,src=0,dst=2,val=20 \ -numa dist,src=0,dst=3,val=22 \ -numa dist,src=1,dst=2,val=22 \ -numa dist,src=2,dst=3,val=12 \ -numa dist,src=1,dst=3,val=24 \ -m 4G -cpu cortex-a57 -kernel arch/arm64/boot/Image w/o patch, we get lots of "groups don't span domain->span": [ 0.802139] CPU0 attaching sched-domain(s): [ 0.802193] domain-0: span=0-1 level=MC [ 0.802443] groups: 0:{ span=0 cap=1013 }, 1:{ span=1 cap=979 } [ 0.802693] domain-1: span=0-3 level=NUMA [ 0.802731] groups: 0:{ span=0-1 cap=1992 }, 2:{ span=2-3 cap=1943 } [ 0.802811] domain-2: span=0-5 level=NUMA [ 0.802829] groups: 0:{ span=0-3 cap=3935 }, 4:{ span=4-7 cap=3937 } [ 0.802881] ERROR: groups don't span domain->span [ 0.803058] domain-3: span=0-7 level=NUMA [ 0.803080] groups: 0:{ span=0-5 mask=0-1 cap=5843 }, 6:{ span=4-7 mask=6-7 cap=4077 } [ 0.804055] CPU1 attaching sched-domain(s): [ 0.804072] domain-0: span=0-1 level=MC [ 0.804096] groups: 1:{ span=1 cap=979 }, 0:{ span=0 cap=1013 } [ 0.804152] domain-1: span=0-3 level=NUMA [ 0.804170] groups: 0:{ span=0-1 cap=1992 }, 2:{ span=2-3 cap=1943 } [ 0.804219] domain-2: span=0-5 level=NUMA [ 0.804236] groups: 0:{ span=0-3 cap=3935 }, 4:{ span=4-7 cap=3937 } [ 0.804302] ERROR: groups don't span domain->span [ 0.804520] domain-3: span=0-7 level=NUMA [ 0.804546] groups: 0:{ span=0-5 mask=0-1 cap=5843 }, 6:{ span=4-7 mask=6-7 cap=4077 } [ 0.804677] CPU2 attaching sched-domain(s): [ 0.804687] domain-0: span=2-3 level=MC [ 0.804705] groups: 2:{ span=2 cap=934 }, 3:{ span=3 cap=1009 } [ 0.804754] domain-1: span=0-3 level=NUMA [ 0.804772] groups: 2:{ span=2-3 cap=1943 }, 0:{ span=0-1 cap=1992 } [ 0.804820] domain-2: span=0-5 level=NUMA [ 0.804836] groups: 2:{ span=0-3 mask=2-3 cap=3991 }, 4:{ span=0-1,4-7 mask=4-5 cap=5985 } [ 0.804944] ERROR: groups don't span domain->span [ 0.805108] domain-3: span=0-7 level=NUMA [ 0.805134] groups: 2:{ span=0-5 mask=2-3 cap=5899 }, 6:{ span=0-1,4-7 mask=6-7 cap=6125 } [ 0.805223] CPU3 attaching sched-domain(s): [ 0.805232] domain-0: span=2-3 level=MC [ 0.805249] groups: 3:{ span=3 cap=1009 }, 2:{ span=2 cap=934 } [ 0.805319] domain-1: span=0-3 level=NUMA [ 0.805336] groups: 2:{ span=2-3 cap=1943 }, 0:{ span=0-1 cap=1992 } [ 0.805383] domain-2: span=0-5 level=NUMA [ 0.805399] groups: 2:{ span=0-3 mask=2-3 cap=3991 }, 4:{ span=0-1,4-7 mask=4-5 cap=5985 } [ 0.805458] ERROR: groups don't span domain->span [ 0.805605] domain-3: span=0-7 level=NUMA [ 0.805626] groups: 2:{ span=0-5 mask=2-3 cap=5899 }, 6:{ span=0-1,4-7 mask=6-7 cap=6125 } [ 0.805712] CPU4 attaching sched-domain(s): [ 0.805721] domain-0: span=4-5 level=MC [ 0.805738] groups: 4:{ span=4 cap=984 }, 5:{ span=5 cap=924 } [ 0.805787] domain-1: span=4-7 level=NUMA [ 0.805803] groups: 4:{ span=4-5 cap=1908 }, 6:{ span=6-7 cap=2029 } [ 0.805851] domain-2: span=0-1,4-7 level=NUMA [ 0.805867] groups: 4:{ span=4-7 cap=3937 }, 0:{ span=0-3 cap=3935 } [ 0.805915] ERROR: groups don't span domain->span [ 0.806108] domain-3: span=0-7 level=NUMA [ 0.806130] groups: 4:{ span=0-1,4-7 mask=4-5 cap=5985 }, 2:{ span=0-3 mask=2-3 cap=3991 } [ 0.806214] CPU5 attaching sched-domain(s): [ 0.806222] domain-0: span=4-5 level=MC [ 0.806240] groups: 5:{ span=5 cap=924 }, 4:{ span=4 cap=984 } [ 0.806841] domain-1: span=4-7 level=NUMA [ 0.806866] groups: 4:{ span=4-5 cap=1908 }, 6:{ span=6-7 cap=2029 } [ 0.806934] domain-2: span=0-1,4-7 level=NUMA [ 0.806953] groups: 4:{ span=4-7 cap=3937 }, 0:{ span=0-3 cap=3935 } [ 0.807004] ERROR: groups don't span domain->span [ 0.807312] domain-3: span=0-7 level=NUMA [ 0.807386] groups: 4:{ span=0-1,4-7 mask=4-5 cap=5985 }, 2:{ span=0-3 mask=2-3 cap=3991 } [ 0.807686] CPU6 attaching sched-domain(s): [ 0.807710] domain-0: span=6-7 level=MC [ 0.807750] groups: 6:{ span=6 cap=1017 }, 7:{ span=7 cap=1012 } [ 0.807840] domain-1: span=4-7 level=NUMA [ 0.807870] groups: 6:{ span=6-7 cap=2029 }, 4:{ span=4-5 cap=1908 } [ 0.807952] domain-2: span=0-1,4-7 level=NUMA [ 0.807985] groups: 6:{ span=4-7 mask=6-7 cap=4077 }, 0:{ span=0-5 mask=0-1 cap=5843 } [ 0.808045] ERROR: groups don't span domain->span [ 0.808257] domain-3: span=0-7 level=NUMA [ 0.808571] groups: 6:{ span=0-1,4-7 mask=6-7 cap=6125 }, 2:{ span=0-5 mask=2-3 cap=5899 } [ 0.808848] CPU7 attaching sched-domain(s): [ 0.808860] domain-0: span=6-7 level=MC [ 0.808880] groups: 7:{ span=7 cap=1012 }, 6:{ span=6 cap=1017 } [ 0.808953] domain-1: span=4-7 level=NUMA [ 0.808974] groups: 6:{ span=6-7 cap=2029 }, 4:{ span=4-5 cap=1908 } [ 0.809034] domain-2: span=0-1,4-7 level=NUMA [ 0.809055] groups: 6:{ span=4-7 mask=6-7 cap=4077 }, 0:{ span=0-5 mask=0-1 cap=5843 } [ 0.809128] ERROR: groups don't span domain->span [ 0.810361] domain-3: span=0-7 level=NUMA [ 0.810400] groups: 6:{ span=0-1,4-7 mask=6-7 cap=5961 }, 2:{ span=0-5 mask=2-3 cap=5903 } w/ patch, we don't get "groups don't span domain->span" any more: [ 0.868907] CPU0 attaching sched-domain(s): [ 0.868962] domain-0: span=0-1 level=MC [ 0.869179] groups: 0:{ span=0 cap=1013 }, 1:{ span=1 cap=983 } [ 0.869405] domain-1: span=0-3 level=NUMA [ 0.869438] groups: 0:{ span=0-1 cap=1996 }, 2:{ span=2-3 cap=2006 } [ 0.869542] domain-2: span=0-5 level=NUMA [ 0.869559] groups: 0:{ span=0-3 cap=4002 }, 5:{ span=4-5 cap=2048 } [ 0.869603] domain-3: span=0-7 level=NUMA [ 0.869618] groups: 0:{ span=0-5 mask=0-1 cap=5980 }, 6:{ span=4-7 mask=6-7 cap=4016 } [ 0.870303] CPU1 attaching sched-domain(s): [ 0.870314] domain-0: span=0-1 level=MC [ 0.870334] groups: 1:{ span=1 cap=983 }, 0:{ span=0 cap=1013 } [ 0.870381] domain-1: span=0-3 level=NUMA [ 0.870396] groups: 0:{ span=0-1 cap=1996 }, 2:{ span=2-3 cap=2006 } [ 0.870440] domain-2: span=0-5 level=NUMA [ 0.870454] groups: 0:{ span=0-3 cap=4002 }, 5:{ span=4-5 cap=2048 } [ 0.870507] domain-3: span=0-7 level=NUMA [ 0.870530] groups: 0:{ span=0-5 mask=0-1 cap=5980 }, 6:{ span=4-7 mask=6-7 cap=4016 } [ 0.870611] CPU2 attaching sched-domain(s): [ 0.870619] domain-0: span=2-3 level=MC [ 0.870634] groups: 2:{ span=2 cap=1007 }, 3:{ span=3 cap=999 } [ 0.870677] domain-1: span=0-3 level=NUMA [ 0.870691] groups: 2:{ span=2-3 cap=2006 }, 0:{ span=0-1 cap=1996 } [ 0.870734] domain-2: span=0-5 level=NUMA [ 0.870748] groups: 2:{ span=0-3 mask=2-3 cap=4054 }, 5:{ span=4-5 cap=2048 } [ 0.870795] domain-3: span=0-7 level=NUMA [ 0.870809] groups: 2:{ span=0-5 mask=2-3 cap=6032 }, 6:{ span=0-1,4-7 mask=6-7 cap=6064 } [ 0.870913] CPU3 attaching sched-domain(s): [ 0.870921] domain-0: span=2-3 level=MC [ 0.870936] groups: 3:{ span=3 cap=999 }, 2:{ span=2 cap=1007 } [ 0.870979] domain-1: span=0-3 level=NUMA [ 0.870993] groups: 2:{ span=2-3 cap=2006 }, 0:{ span=0-1 cap=1996 } [ 0.871035] domain-2: span=0-5 level=NUMA [ 0.871049] groups: 2:{ span=0-3 mask=2-3 cap=4054 }, 5:{ span=4-5 cap=2048 } [ 0.871096] domain-3: span=0-7 level=NUMA [ 0.871110] groups: 2:{ span=0-5 mask=2-3 cap=6032 }, 6:{ span=0-1,4-7 mask=6-7 cap=6064 } [ 0.871177] CPU4 attaching sched-domain(s): [ 0.871185] domain-0: span=4-5 level=MC [ 0.871200] groups: 4:{ span=4 cap=977 }, 5:{ span=5 cap=1001 } [ 0.871243] domain-1: span=4-7 level=NUMA [ 0.871257] groups: 4:{ span=4-5 cap=1978 }, 6:{ span=6-7 cap=1968 } [ 0.871300] domain-2: span=0-1,4-7 level=NUMA [ 0.871314] groups: 4:{ span=4-7 cap=3946 }, 1:{ span=0-1 cap=2048 } [ 0.871356] domain-3: span=0-7 level=NUMA [ 0.871370] groups: 4:{ span=0-1,4-7 mask=4-5 cap=5994 }, 2:{ span=0-3 mask=2-3 cap=4054 } [ 0.871436] CPU5 attaching sched-domain(s): [ 0.871443] domain-0: span=4-5 level=MC [ 0.871457] groups: 5:{ span=5 cap=1001 }, 4:{ span=4 cap=977 } [ 0.871512] domain-1: span=4-7 level=NUMA [ 0.871893] groups: 4:{ span=4-5 cap=1978 }, 6:{ span=6-7 cap=1968 } [ 0.871949] domain-2: span=0-1,4-7 level=NUMA [ 0.871966] groups: 4:{ span=4-7 cap=3946 }, 1:{ span=0-1 cap=2048 } [ 0.872010] domain-3: span=0-7 level=NUMA [ 0.872025] groups: 4:{ span=0-1,4-7 mask=4-5 cap=5994 }, 2:{ span=0-3 mask=2-3 cap=4054 } [ 0.872115] CPU6 attaching sched-domain(s): [ 0.872123] domain-0: span=6-7 level=MC [ 0.872139] groups: 6:{ span=6 cap=993 }, 7:{ span=7 cap=975 } [ 0.872186] domain-1: span=4-7 level=NUMA [ 0.872202] groups: 6:{ span=6-7 cap=1968 }, 4:{ span=4-5 cap=1978 } [ 0.872246] domain-2: span=0-1,4-7 level=NUMA [ 0.872260] groups: 6:{ span=4-7 mask=6-7 cap=4016 }, 1:{ span=0-1 cap=2048 } [ 0.872309] domain-3: span=0-7 level=NUMA [ 0.872323] groups: 6:{ span=0-1,4-7 mask=6-7 cap=6064 }, 2:{ span=0-5 mask=2-3 cap=6032 } [ 0.872392] CPU7 attaching sched-domain(s): [ 0.872399] domain-0: span=6-7 level=MC [ 0.872414] groups: 7:{ span=7 cap=975 }, 6:{ span=6 cap=993 } [ 0.872458] domain-1: span=4-7 level=NUMA [ 0.872472] groups: 6:{ span=6-7 cap=1968 }, 4:{ span=4-5 cap=1978 } [ 0.872662] domain-2: span=0-1,4-7 level=NUMA [ 0.872685] groups: 6:{ span=4-7 mask=6-7 cap=4016 }, 1:{ span=0-1 cap=2048 } [ 0.872737] domain-3: span=0-7 level=NUMA [ 0.872752] groups: 6:{ span=0-1,4-7 mask=6-7 cap=6064 }, 2:{ span=0-5 mask=2-3 cap=6032 } Reported-by: Valentin Schneider <valentin.schneider(a)arm.com> Tested-by: Meelis Roos <mroos(a)linux.ee> Signed-off-by: Barry Song <song.bao.hua(a)hisilicon.com> --- Differences with RFC v2 * added tested-by Meelis Roos for the fixed "8-node Sun Fire X4600-M2" * removed the hacking code in balance_mask and should_we_balance() * removed the redundant "from_grandchild" field from sched_group The patch is based on 5.11-rc6; kernel/sched/topology.c | 83 ++++++++++++++++++++++++++--------------- 1 file changed, 52 insertions(+), 31 deletions(-) diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c index 5d3675c7a76b..100feb2fd8a0 100644 --- a/kernel/sched/topology.c +++ b/kernel/sched/topology.c @@ -723,35 +723,6 @@ cpu_attach_domain(struct sched_domain *sd, struct root_domain *rd, int cpu) for (tmp = sd; tmp; tmp = tmp->parent) numa_distance += !!(tmp->flags & SD_NUMA); - /* - * FIXME: Diameter >=3 is misrepresented. - * - * Smallest diameter=3 topology is: - * - * node 0 1 2 3 - * 0: 10 20 30 40 - * 1: 20 10 20 30 - * 2: 30 20 10 20 - * 3: 40 30 20 10 - * - * 0 --- 1 --- 2 --- 3 - * - * NUMA-3 0-3 N/A N/A 0-3 - * groups: {0-2},{1-3} {1-3},{0-2} - * - * NUMA-2 0-2 0-3 0-3 1-3 - * groups: {0-1},{1-3} {0-2},{2-3} {1-3},{0-1} {2-3},{0-2} - * - * NUMA-1 0-1 0-2 1-3 2-3 - * groups: {0},{1} {1},{2},{0} {2},{3},{1} {3},{2} - * - * NUMA-0 0 1 2 3 - * - * The NUMA-2 groups for nodes 0 and 3 are obviously buggered, as the - * group span isn't a subset of the domain span. - */ - WARN_ONCE(numa_distance > 2, "Shortest NUMA path spans too many nodes\n"); - sched_domain_debug(sd, cpu); rq_attach_root(rq, rd); @@ -916,6 +887,11 @@ build_balance_mask(struct sched_domain *sd, struct sched_group *sg, struct cpuma if (!sibling->child) continue; + while (sibling->child && + !cpumask_subset(sched_domain_span(sibling->child), + sched_domain_span(sd))) + sibling = sibling->child; + /* If we would not end up here, we can't continue from here */ if (!cpumask_equal(sg_span, sched_domain_span(sibling->child))) continue; @@ -955,7 +931,8 @@ build_group_from_child_sched_domain(struct sched_domain *sd, int cpu) } static void init_overlap_sched_group(struct sched_domain *sd, - struct sched_group *sg) + struct sched_group *sg, + int from_grandchild) { struct cpumask *mask = sched_domains_tmpmask2; struct sd_data *sdd = sd->private; @@ -964,6 +941,12 @@ static void init_overlap_sched_group(struct sched_domain *sd, build_balance_mask(sd, sg, mask); cpu = cpumask_first_and(sched_group_span(sg), mask); + /* + * for the group generated by grandchild, use the sgc of 2nd cpu + * because the 1st cpu might be used by another sched_group + */ + if (from_grandchild && cpumask_weight(mask) > 1) + cpu = cpumask_next_and(cpu, sched_group_span(sg), mask); sg->sgc = *per_cpu_ptr(sdd->sgc, cpu); if (atomic_inc_return(&sg->sgc->ref) == 1) @@ -996,6 +979,7 @@ build_overlap_sched_groups(struct sched_domain *sd, int cpu) for_each_cpu_wrap(i, span, cpu) { struct cpumask *sg_span; + int from_grandchild = 0; if (cpumask_test_cpu(i, covered)) continue; @@ -1015,6 +999,43 @@ build_overlap_sched_groups(struct sched_domain *sd, int cpu) if (!cpumask_test_cpu(i, sched_domain_span(sibling))) continue; + /* + * for NUMA diameter >= 3, building sched_domain by sibling's + * child's child domain to prevent sched_group from spanning + * out of sched_domain + * if we don't do this, Diameter >=3 is misrepresented: + * + * Smallest diameter=3 topology is: + * + * node 0 1 2 3 + * 0: 10 20 30 40 + * 1: 20 10 20 30 + * 2: 30 20 10 20 + * 3: 40 30 20 10 + * + * 0 --- 1 --- 2 --- 3 + * + * NUMA-3 0-3 N/A N/A 0-3 + * groups: {0-2},{1-3} {1-3},{0-2} + * + * NUMA-2 0-2 0-3 0-3 1-3 + * groups: {0-1},{1-3} {0-2},{2-3} {1-3},{0-1} {2-3},{0-2} + * + * NUMA-1 0-1 0-2 1-3 2-3 + * groups: {0},{1} {1},{2},{0} {2},{3},{1} {3},{2} + * + * NUMA-0 0 1 2 3 + * + * The NUMA-2 groups for nodes 0 and 3 are obviously buggered, as the + * group span isn't a subset of the domain span. + */ + while (sibling->child && + !cpumask_subset(sched_domain_span(sibling->child), + span)) { + sibling = sibling->child; + from_grandchild = 1; + } + sg = build_group_from_child_sched_domain(sibling, cpu); if (!sg) goto fail; @@ -1022,7 +1043,7 @@ build_overlap_sched_groups(struct sched_domain *sd, int cpu) sg_span = sched_group_span(sg); cpumask_or(covered, covered, sg_span); - init_overlap_sched_group(sd, sg); + init_overlap_sched_group(sd, sg, from_grandchild); if (!first) first = sg; -- 2.25.1

4 8

[PATCH 0/3] update doc for hns3
by Lijun Ou 03 Feb '21

03 Feb '21

Here series add some updates for hns3 rst and TM feature note for hns3 as well as FEC feature notes. Lijun Ou (2): doc: update release notes for hns3 doc: fix hns3 rst Min Hu (Connor) (1): doc: add FEC in NIC features doc/guides/nics/features.rst | 14 ++++++++++++++ doc/guides/nics/features/default.ini | 1 + doc/guides/nics/hns3.rst | 2 +- doc/guides/rel_notes/release_21_02.rst | 4 ++++ 4 files changed, 20 insertions(+), 1 deletion(-) -- 2.7.4

4 28

[PATCH] perf test: Add parse-metric memory bandwidth testcase
by John Garry 03 Feb '21

03 Feb '21

Event duration_time in a metric expression requires special handling. Improve test coverage by including a metric whose expression includes duration_time. The actual metric is a copied from the L1D_Cache_Fill_BW metric on my broadwell machine. Signed-off-by: John Garry <john.garry(a)huawei.com> --- Based on acme perf/core + "perf metricgroup: Fix for metrics containing duration_time" diff --git a/tools/perf/tests/parse-metric.c b/tools/perf/tests/parse-metric.c index ce7be37f0d88..6dc1db1626ad 100644 --- a/tools/perf/tests/parse-metric.c +++ b/tools/perf/tests/parse-metric.c @@ -69,6 +69,10 @@ static struct pmu_event pme_test[] = { .metric_expr = "1/m3", .metric_name = "M3", }, +{ + .metric_expr = "64 * l1d.replacement / 1000000000 / duration_time", + .metric_name = "L1D_Cache_Fill_BW", +}, { .name = NULL, } @@ -107,6 +111,8 @@ static void load_runtime_stat(struct runtime_stat *st, struct evlist *evlist, evlist__for_each_entry(evlist, evsel) { count = find_value(evsel->name, vals); perf_stat__update_shadow_stats(evsel, count, 0, st); + if (!strcmp(evsel->name, "duration_time")) + update_stats(&walltime_nsecs_stats, count); } } @@ -321,6 +327,23 @@ static int test_recursion_fail(void) return 0; } +static int test_memory_bandwidth(void) +{ + double ratio; + struct value vals[] = { + { .event = "l1d.replacement", .val = 4000000 }, + { .event = "duration_time", .val = 200000000 }, + { .event = NULL, }, + }; + + TEST_ASSERT_VAL("failed to compute metric", + compute_metric("L1D_Cache_Fill_BW", vals, &ratio) == 0); + TEST_ASSERT_VAL("L1D_Cache_Fill_BW, wrong ratio", + 1.28 == ratio); + + return 0; +} + static int test_metric_group(void) { double ratio1, ratio2; @@ -353,5 +376,6 @@ int test__parse_metric(struct test *test __maybe_unused, int subtest __maybe_unu TEST_ASSERT_VAL("DCache_L2 failed", test_dcache_l2() == 0); TEST_ASSERT_VAL("recursion fail failed", test_recursion_fail() == 0); TEST_ASSERT_VAL("test metric group", test_metric_group() == 0); + TEST_ASSERT_VAL("Memory bandwidth", test_memory_bandwidth() == 0); return 0; } -- 2.26.2

3 2

[PATCH] drivers/perf: Prevent forced unbinding of ARM_DMC620_PMU drivers
by Qi Liu 03 Feb '21

03 Feb '21

Set "suppress_bind_attrs" to true, so that bind/unbind can be disabled via sysfs and prevent unbinding ARM_DMC620_PMU drivers during perf sampling. Signed-off-by: Qi Liu <liuqi115(a)huawei.com> --- drivers/perf/arm_dmc620_pmu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/perf/arm_dmc620_pmu.c b/drivers/perf/arm_dmc620_pmu.c index 27f54c0..66ad5b3 100644 --- a/drivers/perf/arm_dmc620_pmu.c +++ b/drivers/perf/arm_dmc620_pmu.c @@ -717,6 +717,7 @@ static struct platform_driver dmc620_pmu_driver = { .driver = { .name = DMC620_DRVNAME, .acpi_match_table = dmc620_acpi_match, + .suppress_bind_attrs = true, }, .probe = dmc620_pmu_device_probe, .remove = dmc620_pmu_device_remove, -- 2.8.1

2 1

[PATCH v2] mtd: spi-nor: check 4-byte address support when parsing 4bait
by Yicong Yang 02 Feb '21

02 Feb '21

The spi-nor core will convert the address mode to 4-btye, without checking whether 4-byte address is supported or not. For example, the 16M s25fs128s1 can work under both 3-byte and 4-byte address and provides a 4bait table. The spi-nor will drive the flash under 4-byte address mode after parsing the 4bait and will cause it unusable on platforms doesn't support 4-byte. Add checking of 4-byte address support when parsing the 4bait table, stop converting the address mode if it's not supported. The issue maybe addressed by moving the address mode set and 4-byte operation check out of paring 4bait table[1], but fix this with this patch to make the flash work properly on some platform first. [1] https://lore.kernel.org/linux-mtd/20210129111649.jypytpp7dkywthwh@ti.com/ Signed-off-by: Yicong Yang <yangyicong(a)hisilicon.com> --- Change since v1: - address the comments from Pratyush Link: https://lore.kernel.org/linux-mtd/20210129111649.jypytpp7dkywthwh@ti.com/ drivers/mtd/spi-nor/sfdp.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c index 6ee7719..46ce389 100644 --- a/drivers/mtd/spi-nor/sfdp.c +++ b/drivers/mtd/spi-nor/sfdp.c @@ -940,6 +940,25 @@ static int spi_nor_parse_smpt(struct spi_nor *nor, return ret; } +static int spi_nor_spimem_check_4byte_addr(struct spi_nor *nor, + const struct spi_nor_read_command *read) +{ + struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(read->opcode, 0), + SPI_MEM_OP_ADDR(4, 0, 1), + SPI_MEM_OP_DUMMY(0, 1), + SPI_MEM_OP_DATA_IN(0, NULL, 1)); + + spi_nor_spimem_setup_op(nor, &op, read->proto); + + op.dummy.nbytes = (read->num_mode_clocks + read->num_wait_states) * + op.dummy.buswidth / 8; + + if (!spi_mem_supports_op(nor->spimem, &op)) + return -EOPNOTSUPP; + + return 0; +} + /** * spi_nor_parse_4bait() - parse the 4-Byte Address Instruction Table * @nor: pointer to a 'struct spi_nor'. @@ -1061,6 +1080,33 @@ static int spi_nor_parse_4bait(struct spi_nor *nor, goto out; /* + * Check whether the 4-byte address is supported before converting + * the instruction set to 4-byte. + */ + if (nor->spimem) { + bool support = false; + + for (i = 0; i < SNOR_CMD_READ_MAX; i++) { + struct spi_nor_read_command read_cmd; + + memcpy(&read_cmd, &params->reads[i], sizeof(read_cmd)); + + read_cmd.opcode = spi_nor_convert_3to4_read(read_cmd.opcode); + if (!spi_nor_spimem_check_4byte_addr(nor, &read_cmd)) { + support = true; + break; + } + } + + /* + * No supported 4-byte instruction is found, stop parsing the + * 4bait table. + */ + if (!support) + goto out; + } + + /* * Discard all operations from the 4-byte instruction set which are * not supported by this memory. */ -- 2.8.1

1 0

[PATCH 00/14] Misc updates for hns3
by Lijun Ou 02 Feb '21

02 Feb '21

This series add a new feature LSC event report and two bugfixes as well as some cleanup patches. Chengchang Tang (2): net/hns3: reconstruct the Rx interrupt map net/hns3: fix interrupt resources in Rx interrupt mode Chengwen Feng (1): net/hns3: support LSC event report Huisong Li (2): net/hns3: encapsulate dfx stats in Rx/Tx datapatch net/hns3: move queue stats to xstats Lijun Ou (9): net/hns3: use array instead of switch-case net/hns3: move judgment conditions to separated functions net/hns3: extract common judgments for all FDIR type net/hns3: refactor reset event report function net/hns3: fix memory leak with secondary process exit net/hns3: rename RSS functions net/hns3: adjust some comments net/hns3: remove unnecessary parentheses net/hns3: use %d instead of %u for enum variable drivers/net/hns3/hns3_cmd.c | 54 ++-- drivers/net/hns3/hns3_cmd.h | 9 +- drivers/net/hns3/hns3_ethdev.c | 208 ++++++++++------ drivers/net/hns3/hns3_ethdev.h | 4 +- drivers/net/hns3/hns3_ethdev_vf.c | 111 ++++++--- drivers/net/hns3/hns3_flow.c | 180 ++++++-------- drivers/net/hns3/hns3_mbx.c | 14 +- drivers/net/hns3/hns3_regs.c | 2 +- drivers/net/hns3/hns3_regs.h | 24 +- drivers/net/hns3/hns3_rss.c | 12 +- drivers/net/hns3/hns3_rss.h | 4 +- drivers/net/hns3/hns3_rxtx.c | 60 +++-- drivers/net/hns3/hns3_rxtx.h | 148 ++++++----- drivers/net/hns3/hns3_rxtx_vec_neon.h | 2 +- drivers/net/hns3/hns3_stats.c | 450 ++++++++++++++++++++++++++-------- drivers/net/hns3/hns3_stats.h | 15 +- 16 files changed, 840 insertions(+), 457 deletions(-) -- 2.7.4

4 20

[PATCH] coresight: Remove duplicate header files of coresight drivers
by Qi Liu 02 Feb '21

02 Feb '21

Remove duplicate included header files, as coresight-priv.h is included in these coresight drivers. Signed-off-by: Qi Liu <liuqi115(a)huawei.com> --- drivers/hwtracing/coresight/coresight-catu.c | 2 -- drivers/hwtracing/coresight/coresight-core.c | 3 --- drivers/hwtracing/coresight/coresight-cpu-debug.c | 3 --- drivers/hwtracing/coresight/coresight-cti-core.c | 3 --- drivers/hwtracing/coresight/coresight-cti-platform.c | 1 - drivers/hwtracing/coresight/coresight-cti.h | 1 - drivers/hwtracing/coresight/coresight-etb10.c | 4 ---- drivers/hwtracing/coresight/coresight-etm-perf.c | 1 - drivers/hwtracing/coresight/coresight-etm3x-sysfs.c | 1 - drivers/hwtracing/coresight/coresight-etm4x-core.c | 5 ----- drivers/hwtracing/coresight/coresight-etm4x-sysfs.c | 1 - drivers/hwtracing/coresight/coresight-funnel.c | 3 --- drivers/hwtracing/coresight/coresight-platform.c | 2 -- drivers/hwtracing/coresight/coresight-replicator.c | 3 --- drivers/hwtracing/coresight/coresight-stm.c | 3 --- drivers/hwtracing/coresight/coresight-tmc-core.c | 3 --- drivers/hwtracing/coresight/coresight-tmc-etf.c | 1 - drivers/hwtracing/coresight/coresight-tmc-etr.c | 1 - drivers/hwtracing/coresight/coresight-tpiu.c | 4 ---- 19 files changed, 45 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-catu.c b/drivers/hwtracing/coresight/coresight-catu.c index a61313f..fcc0367 100644 --- a/drivers/hwtracing/coresight/coresight-catu.c +++ b/drivers/hwtracing/coresight/coresight-catu.c @@ -7,10 +7,8 @@ * Author: Suzuki K Poulose <suzuki.poulose(a)arm.com> */ -#include <linux/amba/bus.h> #include <linux/device.h> #include <linux/dma-mapping.h> -#include <linux/io.h> #include <linux/kernel.h> #include <linux/slab.h> diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c index 4ba801d..5fb8b12 100644 --- a/drivers/hwtracing/coresight/coresight-core.c +++ b/drivers/hwtracing/coresight/coresight-core.c @@ -7,17 +7,14 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/device.h> -#include <linux/io.h> #include <linux/err.h> #include <linux/export.h> #include <linux/slab.h> #include <linux/stringhash.h> #include <linux/mutex.h> #include <linux/clk.h> -#include <linux/coresight.h> #include <linux/of_platform.h> #include <linux/delay.h> -#include <linux/pm_runtime.h> #include "coresight-etm-perf.h" #include "coresight-priv.h" diff --git a/drivers/hwtracing/coresight/coresight-cpu-debug.c b/drivers/hwtracing/coresight/coresight-cpu-debug.c index e1d2324..f8df512 100644 --- a/drivers/hwtracing/coresight/coresight-cpu-debug.c +++ b/drivers/hwtracing/coresight/coresight-cpu-debug.c @@ -4,15 +4,12 @@ * * Author: Leo Yan <leo.yan(a)linaro.org> */ -#include <linux/amba/bus.h> -#include <linux/coresight.h> #include <linux/cpu.h> #include <linux/debugfs.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/err.h> #include <linux/init.h> -#include <linux/io.h> #include <linux/iopoll.h> #include <linux/kernel.h> #include <linux/module.h> diff --git a/drivers/hwtracing/coresight/coresight-cti-core.c b/drivers/hwtracing/coresight/coresight-cti-core.c index 61dbc1a..ed7ab82 100644 --- a/drivers/hwtracing/coresight/coresight-cti-core.c +++ b/drivers/hwtracing/coresight/coresight-cti-core.c @@ -4,18 +4,15 @@ * Author: Mike Leach <mike.leach(a)linaro.org> */ -#include <linux/amba/bus.h> #include <linux/atomic.h> #include <linux/bits.h> #include <linux/coresight.h> #include <linux/cpu_pm.h> #include <linux/cpuhotplug.h> #include <linux/device.h> -#include <linux/io.h> #include <linux/kernel.h> #include <linux/list.h> #include <linux/mutex.h> -#include <linux/pm_runtime.h> #include <linux/property.h> #include <linux/spinlock.h> diff --git a/drivers/hwtracing/coresight/coresight-cti-platform.c b/drivers/hwtracing/coresight/coresight-cti-platform.c index ccef04f..60b0580 100644 --- a/drivers/hwtracing/coresight/coresight-cti-platform.c +++ b/drivers/hwtracing/coresight/coresight-cti-platform.c @@ -2,7 +2,6 @@ /* * Copyright (c) 2019, The Linaro Limited. All rights reserved. */ -#include <linux/coresight.h> #include <linux/device.h> #include <linux/err.h> #include <linux/of.h> diff --git a/drivers/hwtracing/coresight/coresight-cti.h b/drivers/hwtracing/coresight/coresight-cti.h index acf7b54..0a3b313 100644 --- a/drivers/hwtracing/coresight/coresight-cti.h +++ b/drivers/hwtracing/coresight/coresight-cti.h @@ -7,7 +7,6 @@ #ifndef _CORESIGHT_CORESIGHT_CTI_H #define _CORESIGHT_CORESIGHT_CTI_H -#include <linux/coresight.h> #include <linux/device.h> #include <linux/fwnode.h> #include <linux/list.h> diff --git a/drivers/hwtracing/coresight/coresight-etb10.c b/drivers/hwtracing/coresight/coresight-etb10.c index 0cf6f0b..8d5bc04 100644 --- a/drivers/hwtracing/coresight/coresight-etb10.c +++ b/drivers/hwtracing/coresight/coresight-etb10.c @@ -10,17 +10,13 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/device.h> -#include <linux/io.h> #include <linux/err.h> #include <linux/fs.h> #include <linux/miscdevice.h> #include <linux/uaccess.h> #include <linux/slab.h> #include <linux/spinlock.h> -#include <linux/pm_runtime.h> #include <linux/seq_file.h> -#include <linux/coresight.h> -#include <linux/amba/bus.h> #include <linux/clk.h> #include <linux/circ_buf.h> #include <linux/mm.h> diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index bdc34ca..01aba63 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -4,7 +4,6 @@ * Author: Mathieu Poirier <mathieu.poirier(a)linaro.org> */ -#include <linux/coresight.h> #include <linux/coresight-pmu.h> #include <linux/cpumask.h> #include <linux/device.h> diff --git a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c index e8c7649..5cf6660 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c @@ -5,7 +5,6 @@ */ #include <linux/pid_namespace.h> -#include <linux/pm_runtime.h> #include <linux/sysfs.h> #include "coresight-etm.h" #include "coresight-priv.h" diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index b20b6ff..0438ef7 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -3,13 +3,11 @@ * Copyright (c) 2014, The Linux Foundation. All rights reserved. */ -#include <linux/bitops.h> #include <linux/kernel.h> #include <linux/moduleparam.h> #include <linux/init.h> #include <linux/types.h> #include <linux/device.h> -#include <linux/io.h> #include <linux/err.h> #include <linux/fs.h> #include <linux/slab.h> @@ -20,14 +18,11 @@ #include <linux/clk.h> #include <linux/cpu.h> #include <linux/cpu_pm.h> -#include <linux/coresight.h> #include <linux/coresight-pmu.h> #include <linux/pm_wakeup.h> -#include <linux/amba/bus.h> #include <linux/seq_file.h> #include <linux/uaccess.h> #include <linux/perf_event.h> -#include <linux/pm_runtime.h> #include <linux/property.h> #include <asm/sections.h> diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c index 989ce7b..347ccb7 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c @@ -5,7 +5,6 @@ */ #include <linux/pid_namespace.h> -#include <linux/pm_runtime.h> #include <linux/sysfs.h> #include "coresight-etm4x.h" #include "coresight-priv.h" diff --git a/drivers/hwtracing/coresight/coresight-funnel.c b/drivers/hwtracing/coresight/coresight-funnel.c index 071c723..c79ded9 100644 --- a/drivers/hwtracing/coresight/coresight-funnel.c +++ b/drivers/hwtracing/coresight/coresight-funnel.c @@ -15,9 +15,6 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/platform_device.h> -#include <linux/pm_runtime.h> -#include <linux/coresight.h> -#include <linux/amba/bus.h> #include <linux/clk.h> #include "coresight-priv.h" diff --git a/drivers/hwtracing/coresight/coresight-platform.c b/drivers/hwtracing/coresight/coresight-platform.c index 3629b78..ca22409 100644 --- a/drivers/hwtracing/coresight/coresight-platform.c +++ b/drivers/hwtracing/coresight/coresight-platform.c @@ -13,8 +13,6 @@ #include <linux/of_graph.h> #include <linux/of_platform.h> #include <linux/platform_device.h> -#include <linux/amba/bus.h> -#include <linux/coresight.h> #include <linux/cpumask.h> #include <asm/smp_plat.h> diff --git a/drivers/hwtracing/coresight/coresight-replicator.c b/drivers/hwtracing/coresight/coresight-replicator.c index 7e2a2b7..36788de 100644 --- a/drivers/hwtracing/coresight/coresight-replicator.c +++ b/drivers/hwtracing/coresight/coresight-replicator.c @@ -6,14 +6,11 @@ */ #include <linux/acpi.h> -#include <linux/amba/bus.h> #include <linux/kernel.h> #include <linux/device.h> #include <linux/platform_device.h> -#include <linux/io.h> #include <linux/err.h> #include <linux/slab.h> -#include <linux/pm_runtime.h> #include <linux/property.h> #include <linux/clk.h> #include <linux/of.h> diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c index 9979177..75f0bd8 100644 --- a/drivers/hwtracing/coresight/coresight-stm.c +++ b/drivers/hwtracing/coresight/coresight-stm.c @@ -17,17 +17,14 @@ */ #include <asm/local.h> #include <linux/acpi.h> -#include <linux/amba/bus.h> #include <linux/bitmap.h> #include <linux/clk.h> -#include <linux/coresight.h> #include <linux/coresight-stm.h> #include <linux/err.h> #include <linux/kernel.h> #include <linux/moduleparam.h> #include <linux/of_address.h> #include <linux/perf_event.h> -#include <linux/pm_runtime.h> #include <linux/stm.h> #include "coresight-priv.h" diff --git a/drivers/hwtracing/coresight/coresight-tmc-core.c b/drivers/hwtracing/coresight/coresight-tmc-core.c index 8169dff..4fff281 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-core.c +++ b/drivers/hwtracing/coresight/coresight-tmc-core.c @@ -9,7 +9,6 @@ #include <linux/types.h> #include <linux/device.h> #include <linux/idr.h> -#include <linux/io.h> #include <linux/err.h> #include <linux/fs.h> #include <linux/miscdevice.h> @@ -21,8 +20,6 @@ #include <linux/spinlock.h> #include <linux/pm_runtime.h> #include <linux/of.h> -#include <linux/coresight.h> -#include <linux/amba/bus.h> #include "coresight-priv.h" #include "coresight-tmc.h" diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c index 989d965..b263f75 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etf.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c @@ -6,7 +6,6 @@ #include <linux/atomic.h> #include <linux/circ_buf.h> -#include <linux/coresight.h> #include <linux/perf_event.h> #include <linux/slab.h> #include "coresight-priv.h" diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c index bf5230e..1ab0b28 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etr.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c @@ -5,7 +5,6 @@ */ #include <linux/atomic.h> -#include <linux/coresight.h> #include <linux/dma-mapping.h> #include <linux/iommu.h> #include <linux/idr.h> diff --git a/drivers/hwtracing/coresight/coresight-tpiu.c b/drivers/hwtracing/coresight/coresight-tpiu.c index d5dfee9..c5675f9 100644 --- a/drivers/hwtracing/coresight/coresight-tpiu.c +++ b/drivers/hwtracing/coresight/coresight-tpiu.c @@ -9,12 +9,8 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/device.h> -#include <linux/io.h> #include <linux/err.h> #include <linux/slab.h> -#include <linux/pm_runtime.h> -#include <linux/coresight.h> -#include <linux/amba/bus.h> #include <linux/clk.h> #include "coresight-priv.h" -- 2.8.1

3 2

[PATCH V2 net-next 0/2] net: hns3: updates for -next
by Huazhong Tan 02 Feb '21

02 Feb '21

This patchset adds dump tm info of nodes, priority and qset in debugfs. Three debugfs files tm_nodes, tm_priority and tm_qset are created in new tm directory, and use cat command to dump their info, for examples: $ cat tm_nodes BASE_ID MAX_NUM PG 0 8 PRI 0 8 QSET 0 8 QUEUE 0 1024 $ cat tm_priority ID MODE DWRR C_IR_B C_IR_U C_IR_S C_BS_B C_BS_S C_FLAG C_RATE(Mbps) P_IR_B P_IR_U P_IR_S P_BS_B P_BS_S P_FLAG P_RATE(Mbps) 0000 dwrr 100 0 0 0 5 20 0 0 150 7 0 5 20 0 0 0001 sp 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0002 sp 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0003 sp 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0004 sp 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0005 sp 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0006 sp 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0007 sp 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $ cat tm_qset ID MAP_PRI LINK_VLD MODE DWRR 0000 0 1 dwrr 100 0001 0 0 sp 0 0002 0 0 sp 0 0003 0 0 sp 0 0004 0 0 sp 0 0005 0 0 sp 0 0006 0 0 sp 0 change log: V2: add readonly files for dump all nodes, priority and qset info suggested by Jakub Kicinski. previous version: V1: https://patchwork.kernel.org/project/netdevbpf/patch/1610694569-43099-1-git… Guangbin Huang (2): net: hns3: add interfaces to query information of tm priority/qset net: hns3: add debugfs support for tm nodes, priority and qset info drivers/net/ethernet/hisilicon/hns3/hnae3.h | 8 + drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 55 +++++- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 1 + .../ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c | 153 +++++++++++++++++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 + .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 2 + .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 186 +++++++++++++++++++++ .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h | 48 +++++- 8 files changed, 452 insertions(+), 2 deletions(-) -- 2.7.4

3 5

[PATCH 0/2] Add check of 4-byte when parsing SFDP 4bait table
by Yicong Yang 01 Feb '21

01 Feb '21

Add check of 4-byte address mode support when parsing SFDP 4bait. Some flash will provide a 4bait table and the spi-nor core will convert the address mode to 4-byte without checking whether it's actually supported or not by the controller. For example, the 16M s25fs128s1 provides the 4bait and will be convert to 4-byte address mode, which makes it unusable on hisi-sfc-v3xx on hip08 platform. Add the check before convert the address mode when parsing the 4bait will solve this issue. Yicong Yang (2): mtd: spi-nor: check 4-byte address support when parsing 4bait spi: hisi-sfc-v3xx: add address mode check drivers/mtd/spi-nor/sfdp.c | 48 +++++++++++++++++++++++++++++++++++++++++ drivers/spi/spi-hisi-sfc-v3xx.c | 25 ++++++++++++++++++++- 2 files changed, 72 insertions(+), 1 deletion(-) -- 2.8.1

3 5

[PATCH v2] iommu: Check dev->iommu in iommu_dev_xxx functions
by Shameer Kolothum 01 Feb '21

01 Feb '21

The device iommu probe/attach might have failed leaving dev->iommu to NULL and device drivers may still invoke these functions resulting in a crash in iommu vendor driver code. Hence make sure we check that. Also added iommu_ops to the "struct dev_iommu" and set it if the dev is successfully associated with an iommu. Fixes: a3a195929d40 ("iommu: Add APIs for multiple domains per device") Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi(a)huawei.com> --- v1 --> v2: -Added iommu_ops to struct dev_iommu based on the discussion with Robin. -Rebased against iommu-tree core branch. --- drivers/iommu/iommu.c | 19 +++++++------------ include/linux/iommu.h | 2 ++ 2 files changed, 9 insertions(+), 12 deletions(-) diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c index fd76e2f579fe..6023d0b7c542 100644 --- a/drivers/iommu/iommu.c +++ b/drivers/iommu/iommu.c @@ -217,6 +217,7 @@ static int __iommu_probe_device(struct device *dev, struct list_head *group_list } dev->iommu->iommu_dev = iommu_dev; + dev->iommu->ops = iommu_dev->ops; group = iommu_group_get_for_dev(dev); if (IS_ERR(group)) { @@ -2865,10 +2866,8 @@ EXPORT_SYMBOL_GPL(iommu_fwspec_add_ids); */ int iommu_dev_enable_feature(struct device *dev, enum iommu_dev_features feat) { - const struct iommu_ops *ops = dev->bus->iommu_ops; - - if (ops && ops->dev_enable_feat) - return ops->dev_enable_feat(dev, feat); + if (dev->iommu && dev->iommu->ops->dev_enable_feat) + return dev->iommu->ops->dev_enable_feat(dev, feat); return -ENODEV; } @@ -2881,10 +2880,8 @@ EXPORT_SYMBOL_GPL(iommu_dev_enable_feature); */ int iommu_dev_disable_feature(struct device *dev, enum iommu_dev_features feat) { - const struct iommu_ops *ops = dev->bus->iommu_ops; - - if (ops && ops->dev_disable_feat) - return ops->dev_disable_feat(dev, feat); + if (dev->iommu && dev->iommu->ops->dev_disable_feat) + return dev->iommu->ops->dev_disable_feat(dev, feat); return -EBUSY; } @@ -2892,10 +2889,8 @@ EXPORT_SYMBOL_GPL(iommu_dev_disable_feature); bool iommu_dev_feature_enabled(struct device *dev, enum iommu_dev_features feat) { - const struct iommu_ops *ops = dev->bus->iommu_ops; - - if (ops && ops->dev_feat_enabled) - return ops->dev_feat_enabled(dev, feat); + if (dev->iommu && dev->iommu->ops->dev_feat_enabled) + return dev->iommu->ops->dev_feat_enabled(dev, feat); return false; } diff --git a/include/linux/iommu.h b/include/linux/iommu.h index 524ffc2ff64f..ff0c76bdfb67 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -354,6 +354,7 @@ struct iommu_fault_param { * @fault_param: IOMMU detected device fault reporting data * @fwspec: IOMMU fwspec data * @iommu_dev: IOMMU device this device is linked to + * @ops: iommu-ops for talking to the iommu_dev * @priv: IOMMU Driver private data * * TODO: migrate other per device data pointers under iommu_dev_data, e.g. @@ -364,6 +365,7 @@ struct dev_iommu { struct iommu_fault_param *fault_param; struct iommu_fwspec *fwspec; struct iommu_device *iommu_dev; + const struct iommu_ops *ops; void *priv; }; -- 2.17.1

1 0

[PATCH v3 00/12] add IRQF_NO_AUTOEN for request_irq
by Barry Song 01 Feb '21

01 Feb '21

This patchset added IRQF_NO_AUTOEN for request_irq() and converted drivers/input to this new API. Other drivers will be handled afterwards. -v3: added examples with respect to Greg's comment Barry Song (12): genirq: add IRQF_NO_AUTOEN for request_irq Input: ar1021 - request_irq by IRQF_NO_AUTOEN and remove disable_irq Input: atmel_mxt_ts - request_irq by IRQF_NO_AUTOEN and remove disable_irq Input: melfas_mip4 - request_irq by IRQF_NO_AUTOEN and remove disable_irq Input: bu21029_ts - request_irq by IRQF_NO_AUTOEN and remove irq_set_status_flags Input: stmfts - request_irq by IRQF_NO_AUTOEN and remove irq_set_status_flags Input: zinitix - request_irq by IRQF_NO_AUTOEN and remove irq_set_status_flags Input: mms114 - request_irq by IRQF_NO_AUTOEN and remove disable_irq Input: wm831x-ts - request_irq by IRQF_NO_AUTOEN and remove disable_irq Input: cyttsp - request_irq by IRQF_NO_AUTOEN and remove disable_irq Input: tegra-kbc - request_irq by IRQF_NO_AUTOEN and remove disable_irq Input: tca6416-keypad - request_irq by IRQF_NO_AUTOEN and remove disable_irq drivers/input/keyboard/tca6416-keypad.c | 3 +-- drivers/input/keyboard/tegra-kbc.c | 5 ++--- drivers/input/touchscreen/ar1021_i2c.c | 5 +---- drivers/input/touchscreen/atmel_mxt_ts.c | 5 ++--- drivers/input/touchscreen/bu21029_ts.c | 4 ++-- drivers/input/touchscreen/cyttsp_core.c | 5 ++--- drivers/input/touchscreen/melfas_mip4.c | 5 ++--- drivers/input/touchscreen/mms114.c | 4 ++-- drivers/input/touchscreen/stmfts.c | 3 +-- drivers/input/touchscreen/wm831x-ts.c | 3 +-- drivers/input/touchscreen/zinitix.c | 4 ++-- include/linux/interrupt.h | 3 +++ kernel/irq/manage.c | 8 ++++++++ kernel/irq/settings.h | 10 ++++++++++ 14 files changed, 39 insertions(+), 28 deletions(-) -- 2.25.1

6 19

2024

2023

2022

2021

2020

Linuxarm February 2021