March 2021 - Linuxarm - mailweb.openeuler.org

[PATCH v2] PCI/DPC: Check host->native_dpc before enable dpc service
by Yicong Yang 28 Jul '21

28 Jul '21

Per Downstream Port Containment Related Enhancements ECN[1] Table 4-6, Interpretation of _OSC Control Field Returned Value, for bit 7 of _OSC control return value: "Firmware sets this bit to 1 to grant the OS control over PCI Express Downstream Port Containment configuration." "If control of this feature was requested and denied, or was not requested, the firmware returns this bit set to 0." We store bit 7 of _OSC control return value in host->native_dpc, check it before enable the dpc service as the firmware may not grant the control. [1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 Signed-off-by: Yicong Yang <yangyicong(a)hisilicon.com> --- Change since v1: - use correct reference for _OSC control return value drivers/pci/pcie/portdrv_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index e1fed664..7445d03 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -253,7 +253,8 @@ static int get_port_device_capability(struct pci_dev *dev) */ if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC) && pci_aer_available() && - (pcie_ports_dpc_native || (services & PCIE_PORT_SERVICE_AER))) + (pcie_ports_dpc_native || + ((services & PCIE_PORT_SERVICE_AER) && host->native_dpc))) services |= PCIE_PORT_SERVICE_DPC; if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM || -- 2.8.1

4 11

[RFC PATCH 0/5] KVM/ARM64 Add support for pinned VMIDs
by Shameer Kolothum 23 Jul '21

23 Jul '21

On an ARM64 system with a SMMUv3 implementation that fully supports Broadcast TLB Maintenance(BTM) feature as part of the Distributed Virtual Memory(DVM) protocol, the CPU TLB invalidate instructions are received by SMMUv3. This is very useful when the SMMUv3 shares the page tables with the CPU(eg: Guest SVA use case). For this to work, the SMMU must use the same VMID that is allocated by KVM to configure the stage 2 translations. At present KVM VMID allocations are recycled on rollover and may change as a result. This will create issues if we have to share the KVM VMID with SMMU. Please see the discussion here, https://lore.kernel.org/linux-iommu/20200522101755.GA3453945@myrica/ This series proposes a way to share the VMID between KVM and IOMMU driver by, 1. Splitting the KVM VMID space into two equal halves based on the command line option "kvm-arm.pinned_vmid_enable". 2. First half of the VMID space follows the normal recycle on rollover policy. 3. Second half of the VMID space doesn't roll over and is used to allocate pinned VMIDs. 4. Provides helper function to retrieve the KVM instance associated with a device(if it is part of a vfio group). 5. Introduces generic interfaces to get/put pinned KVM VMIDs. Open Items: 1. I couldn't figure out a way to determine whether a platform actually fully supports DVM/BTM or not. Not sure we can take a call based on SMMUv3 BTM feature bit alone. Probably we can get it from firmware via IORT? 2. The current splitting of VMID space is only one way to do this and probably not the best. Maybe we can follow the pinned ASID method used in SVA code. Suggestions welcome here. 3. The detach_pasid_table() interface is not very clear to me as the current Qemu prototype is not using that. This requires fixing from my side. This is based on Jean-Philippe's SVA series[1] and Eric's SMMUv3 dual-stage support series[2]. The branch with the whole vSVA + BTM solution is here, https://github.com/hisilicon/kernel-dev/tree/5.10-rc4-2stage-v13-vsva-btm-r… This is lightly tested on a HiSilicon D06 platform with uacce/zip dev test tool, ./zip_sva_per -k tlb Thanks, Shameer 1. https://github.com/Linaro/linux-kernel-uadk/commits/uacce-devel-5.10 2. https://lore.kernel.org/linux-iommu/20201118112151.25412-1-eric.auger@redha… Shameer Kolothum (5): vfio: Add a helper to retrieve kvm instance from a dev KVM: Add generic infrastructure to support pinned VMIDs KVM: ARM64: Add support for pinned VMIDs iommu/arm-smmu-v3: Use pinned VMID for NESTED stage with BTM KVM: arm64: Make sure pinned vmid is released on VM exit arch/arm64/include/asm/kvm_host.h | 2 + arch/arm64/kvm/Kconfig | 1 + arch/arm64/kvm/arm.c | 116 +++++++++++++++++++- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 49 ++++++++- drivers/vfio/vfio.c | 12 ++ include/linux/kvm_host.h | 17 +++ include/linux/vfio.h | 1 + virt/kvm/Kconfig | 2 + virt/kvm/kvm_main.c | 25 +++++ 9 files changed, 220 insertions(+), 5 deletions(-) -- 2.17.1

4 12

[PATCH net-next 0/9] net: hns3: refactor and new features for flow director
by Huazhong Tan 19 Jun '21

19 Jun '21

This patchset refactor some functions and add some new features for flow director. patch 1~3: refactor large functions patch 4, 7: add traffic class and user-def field support for ethtool patch 5: use asynchronously configuration patch 6: clean up for hns3_del_all_fd_entries() patch 8, 9: add support for queue bonding mode Jian Shen (9): net: hns3: refactor out hclge_add_fd_entry() net: hns3: refactor out hclge_fd_get_tuple() net: hns3: refactor for function hclge_fd_convert_tuple net: hns3: add support for traffic class tuple support for flow director by ethtool net: hns3: refactor flow director configuration net: hns3: refine for hns3_del_all_fd_entries() net: hns3: add support for user-def data of flow director net: hns3: add support for queue bonding mode of flow director net: hns3: add queue bonding mode support for VF drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h | 8 + drivers/net/ethernet/hisilicon/hns3/hnae3.h | 9 +- drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 7 +- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 91 +- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 14 +- drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 13 +- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c | 2 + .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 21 + .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1570 ++++++++++++++------ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 63 + .../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 33 + .../ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c | 2 + .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 74 + .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 7 + .../ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c | 17 + 15 files changed, 1450 insertions(+), 481 deletions(-) -- 2.7.4

4 20

[RFC PATCH v5 0/4] scheduler: expose the topology of clusters and add cluster scheduler
by Barry Song 21 Apr '21

21 Apr '21

ARM64 server chip Kunpeng 920 has 6 or 8 clusters in each NUMA node, and each cluster has 4 cpus. All clusters share L3 cache data while each cluster has local L3 tag. On the other hand, each cluster will share some internal system bus. This means cache is much more affine inside one cluster than across clusters. +-----------------------------------+ +---------+ | +------+ +------+ +---------------------------+ | | | CPU0 | | cpu1 | | +-----------+ | | | +------+ +------+ | | | | | | +----+ L3 | | | | +------+ +------+ cluster | | tag | | | | | CPU2 | | CPU3 | | | | | | | +------+ +------+ | +-----------+ | | | | | | +-----------------------------------+ | | +-----------------------------------+ | | | +------+ +------+ +--------------------------+ | | | | | | | +-----------+ | | | +------+ +------+ | | | | | | | | L3 | | | | +------+ +------+ +----+ tag | | | | | | | | | | | | | | +------+ +------+ | +-----------+ | | | | | | +-----------------------------------+ | L3 | | data | +-----------------------------------+ | | | +------+ +------+ | +-----------+ | | | | | | | | | | | | | +------+ +------+ +----+ L3 | | | | | | tag | | | | +------+ +------+ | | | | | | | | | | ++ +-----------+ | | | +------+ +------+ |---------------------------+ | +-----------------------------------| | | +-----------------------------------| | | | +------+ +------+ +---------------------------+ | | | | | | | +-----------+ | | | +------+ +------+ | | | | | | +----+ L3 | | | | +------+ +------+ | | tag | | | | | | | | | | | | | | +------+ +------+ | +-----------+ | | | | | | +-----------------------------------+ | | +-----------------------------------+ | | | +------+ +------+ +--------------------------+ | | | | | | | +-----------+ | | | +------+ +------+ | | | | | There is a similar need for clustering in x86. Some x86 cores could share L2 caches that is similar to the cluster in Kupeng 920 (e.g. on Jacobsville there are 6 clusters of 4 Atom cores, each cluster sharing a separate L2, and 24 cores sharing L3). Having a sched_domain for clusters will bring two aspects of improvement: 1. spreading unrelated tasks among clusters, which decreases the contention of resources and improve the throughput. unrelated tasks might be put randomly without cluster sched_domain: +-------------------+ +-----------------+ | +----+ +----+ | | | | |task| |task| | | | | |1 | |2 | | | | | +----+ +----+ | | | | | | | | cluster1 | | cluster2 | +-------------------+ +-----------------+ but with cluster sched_domain, they are likely to spread due to LB: +-------------------+ +-----------------+ | +----+ | | +----+ | | |task| | | |task| | | |1 | | | |2 | | | +----+ | | +----+ | | | | | | cluster1 | | cluster2 | +-------------------+ +-----------------+ 2. gathering related tasks within a cluster, which improves the cache affinity of tasks talking with each other. Without cluster sched_domain, related tasks might be put randomly. In case task1-8 have relationship as below: Task1 wakes up task4 Task2 wakes up task5 Task3 wakes up task6 Task4 wakes up task7 With the tuning of select_idle_cpu() to scan local cluster first, those tasks might get a chance to be gathered like: +---------------------------+ +----------------------+ | +----+ +-----+ | | +----+ +-----+ | | |task| |task | | | |task| |task | | | |1 | | 4 | | | |2 | |5 | | | +----+ +-----+ | | +----+ +-----+ | | | | | | cluster1 | | cluster2 | | | | | | | | | | +-----+ +------+ | | +-----+ +------+ | | |task | | task | | | |task | |task | | | |3 | | 6 | | | |4 | |8 | | | +-----+ +------+ | | +-----+ +------+ | +---------------------------+ +----------------------+ Otherwise, the result might be: +---------------------------+ +----------------------+ | +----+ +-----+ | | +----+ +-----+ | | |task| |task | | | |task| |task | | | |1 | | 2 | | | |5 | |6 | | | +----+ +-----+ | | +----+ +-----+ | | | | | | cluster1 | | cluster2 | | | | | | | | | | +-----+ +------+ | | +-----+ +------+ | | |task | | task | | | |task | |task | | | |3 | | 4 | | | |7 | |8 | | | +-----+ +------+ | | +-----+ +------+ | +---------------------------+ +----------------------+ -v5: * split "add scheduler level for clusters" into two patches to evaluate the impact of spreading and gathering separately; * add a tracepoint of select_idle_cpu for debug purpose; add bcc script in commit log; * add cluster_id = -1 in reset_cpu_topology() * rebased to tip/sched/core -v4: * rebased to tip/sched/core with the latest unified code of select_idle_cpu * added Tim's patch for x86 Jacobsville * also added benchmark data of spreading unrelated tasks * avoided the iteration of sched_domain by moving to static_key(addressing Vincent's comment * used acpi_cpu_id for acpi_find_processor_node(addressing Masa's comment) Barry Song (2): scheduler: add scheduler level for clusters scheduler: scan idle cpu in cluster before scanning the whole llc Jonathan Cameron (1): topology: Represent clusters of CPUs within a die Tim Chen (1): scheduler: Add cluster scheduler level for x86 Documentation/admin-guide/cputopology.rst | 26 +++++++++++-- arch/arm64/Kconfig | 7 ++++ arch/arm64/kernel/topology.c | 2 + arch/x86/Kconfig | 8 ++++ arch/x86/include/asm/smp.h | 7 ++++ arch/x86/include/asm/topology.h | 1 + arch/x86/kernel/cpu/cacheinfo.c | 1 + arch/x86/kernel/cpu/common.c | 3 ++ arch/x86/kernel/smpboot.c | 43 ++++++++++++++++++++- drivers/acpi/pptt.c | 63 +++++++++++++++++++++++++++++++ drivers/base/arch_topology.c | 15 ++++++++ drivers/base/topology.c | 10 +++++ include/linux/acpi.h | 5 +++ include/linux/arch_topology.h | 5 +++ include/linux/sched/cluster.h | 19 ++++++++++ include/linux/sched/topology.h | 7 ++++ include/linux/topology.h | 13 +++++++ include/trace/events/sched.h | 22 +++++++++++ kernel/sched/core.c | 20 ++++++++++ kernel/sched/fair.c | 36 +++++++++++++++++- kernel/sched/sched.h | 1 + kernel/sched/topology.c | 5 +++ 22 files changed, 313 insertions(+), 6 deletions(-) create mode 100644 include/linux/sched/cluster.h -- 1.8.3.1

5 14

[PATCH net v3] net: sched: fix packet stuck problem for lockless qdisc
by Yunsheng Lin 20 Apr '21

20 Apr '21

Lockless qdisc has below concurrent problem: cpu0 cpu1 . . q->enqueue . . . qdisc_run_begin() . . . dequeue_skb() . . . sch_direct_xmit() . . . . q->enqueue . qdisc_run_begin() . return and do nothing . . qdisc_run_end() . cpu1 enqueue a skb without calling __qdisc_run() because cpu0 has not released the lock yet and spin_trylock() return false for cpu1 in qdisc_run_begin(), and cpu0 do not see the skb enqueued by cpu1 when calling dequeue_skb() because cpu1 may enqueue the skb after cpu0 calling dequeue_skb() and before cpu0 calling qdisc_run_end(). Lockless qdisc has below another concurrent problem when tx_action is involved: cpu0(serving tx_action) cpu1 cpu2 . . . . q->enqueue . . qdisc_run_begin() . . dequeue_skb() . . . q->enqueue . . . . sch_direct_xmit() . . . qdisc_run_begin() . . return and do nothing . . . clear __QDISC_STATE_SCHED . . qdisc_run_begin() . . return and do nothing . . . . . . qdisc_run_end() . This patch fixes the above data race by: 1. Get the flag before doing spin_trylock(). 2. If the first spin_trylock() return false and the flag is not set before the first spin_trylock(), Set the flag and retry another spin_trylock() in case other CPU may not see the new flag after it releases the lock. 3. reschedule if the flags is set after the lock is released at the end of qdisc_run_end(). For tx_action case, the flags is also set when cpu1 is at the end if qdisc_run_end(), so tx_action will be rescheduled again to dequeue the skb enqueued by cpu2. Only clear the flag before retrying a dequeuing when dequeuing returns NULL in order to reduce the overhead of the above double spin_trylock() and __netif_schedule() calling. The performance impact of this patch, tested using pktgen and dummy netdev with pfifo_fast qdisc attached: threads without+this_patch with+this_patch delta 1 2.61Mpps 2.60Mpps -0.3% 2 3.97Mpps 3.82Mpps -3.7% 4 5.62Mpps 5.59Mpps -0.5% 8 2.78Mpps 2.77Mpps -0.3% 16 2.22Mpps 2.22Mpps -0.0% Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking") Signed-off-by: Yunsheng Lin <linyunsheng(a)huawei.com> --- V3: fix a compile error and a few comment typo, remove the __QDISC_STATE_DEACTIVATED checking, and update the performance data. V2: Avoid the overhead of fixing the data race as much as possible. --- include/net/sch_generic.h | 38 +++++++++++++++++++++++++++++++++++++- net/sched/sch_generic.c | 12 ++++++++++++ 2 files changed, 49 insertions(+), 1 deletion(-) diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index f7a6e14..e3f46eb 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -36,6 +36,7 @@ struct qdisc_rate_table { enum qdisc_state_t { __QDISC_STATE_SCHED, __QDISC_STATE_DEACTIVATED, + __QDISC_STATE_NEED_RESCHEDULE, }; struct qdisc_size_table { @@ -159,8 +160,38 @@ static inline bool qdisc_is_empty(const struct Qdisc *qdisc) static inline bool qdisc_run_begin(struct Qdisc *qdisc) { if (qdisc->flags & TCQ_F_NOLOCK) { + bool dont_retry = test_bit(__QDISC_STATE_NEED_RESCHEDULE, + &qdisc->state); + + if (spin_trylock(&qdisc->seqlock)) + goto nolock_empty; + + /* If the flag is set before doing the spin_trylock() and + * the above spin_trylock() return false, it means other cpu + * holding the lock will do dequeuing for us, or it wil see + * the flag set after releasing lock and reschedule the + * net_tx_action() to do the dequeuing. + */ + if (dont_retry) + return false; + + /* We could do set_bit() before the first spin_trylock(), + * and avoid doing second spin_trylock() completely, then + * we could have multi cpus doing the set_bit(). Here use + * dont_retry to avoid doing the set_bit() and the second + * spin_trylock(), which has 5% performance improvement than + * doing the set_bit() before the first spin_trylock(). + */ + set_bit(__QDISC_STATE_NEED_RESCHEDULE, + &qdisc->state); + + /* Retry again in case other CPU may not see the new flag + * after it releases the lock at the end of qdisc_run_end(). + */ if (!spin_trylock(&qdisc->seqlock)) return false; + +nolock_empty: WRITE_ONCE(qdisc->empty, false); } else if (qdisc_is_running(qdisc)) { return false; @@ -176,8 +207,13 @@ static inline bool qdisc_run_begin(struct Qdisc *qdisc) static inline void qdisc_run_end(struct Qdisc *qdisc) { write_seqcount_end(&qdisc->running); - if (qdisc->flags & TCQ_F_NOLOCK) + if (qdisc->flags & TCQ_F_NOLOCK) { spin_unlock(&qdisc->seqlock); + + if (unlikely(test_bit(__QDISC_STATE_NEED_RESCHEDULE, + &qdisc->state))) + __netif_schedule(qdisc); + } } static inline bool qdisc_may_bulk(const struct Qdisc *qdisc) diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 44991ea..4953430 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -640,8 +640,10 @@ static struct sk_buff *pfifo_fast_dequeue(struct Qdisc *qdisc) { struct pfifo_fast_priv *priv = qdisc_priv(qdisc); struct sk_buff *skb = NULL; + bool need_retry = true; int band; +retry: for (band = 0; band < PFIFO_FAST_BANDS && !skb; band++) { struct skb_array *q = band2list(priv, band); @@ -652,6 +654,16 @@ static struct sk_buff *pfifo_fast_dequeue(struct Qdisc *qdisc) } if (likely(skb)) { qdisc_update_stats_at_dequeue(qdisc, skb); + } else if (need_retry && + test_and_clear_bit(__QDISC_STATE_NEED_RESCHEDULE, + &qdisc->state)) { + /* do another enqueuing after clearing the flag to + * avoid calling __netif_schedule(). + */ + smp_mb__after_atomic(); + need_retry = false; + + goto retry; } else { WRITE_ONCE(qdisc->empty, true); } -- 2.7.4

2 6

[PATCH] app/testpmd: support Tx mbuf free on demand cmd
by Lijun Ou 19 Apr '21

19 Apr '21

From: Chengwen Feng <fengchengwen(a)huawei.com> This patch support tx_done_cleanup command: tx_done_cleanup port (port_id) (queue_id) (free_cnt) User must make sure there are no concurrent access to the same Tx queue (like rte_eth_tx_burst, rte_eth_dev_tx_queue_stop and so on) when this command executed. Signed-off-by: Chengwen Feng <fengchengwen(a)huawei.com> Signed-off-by: Lijun Ou <oulijun(a)huawei.com> --- app/test-pmd/cmdline.c | 91 +++++++++++++++++++++++++++++ doc/guides/rel_notes/release_21_05.rst | 2 + doc/guides/testpmd_app_ug/testpmd_funcs.rst | 7 +++ 3 files changed, 100 insertions(+) diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index 14110eb..832ae70 100644 --- a/app/test-pmd/cmdline.c +++ b/app/test-pmd/cmdline.c @@ -36,6 +36,7 @@ #include <rte_pci.h> #include <rte_ether.h> #include <rte_ethdev.h> +#include <rte_ethdev_driver.h> #include <rte_string_fns.h> #include <rte_devargs.h> #include <rte_flow.h> @@ -675,6 +676,9 @@ static void cmd_help_long_parsed(void *parsed_result, "set port (port_id) ptype_mask (ptype_mask)\n" " set packet types classification for a specific port\n\n" + "tx_done_cleanup (port_id) (queue_id) (free_cnt)\n" + " Cleanup a tx queue's mbuf on a port\n\n" + "set port (port_id) queue-region region_id (value) " "queue_start_index (value) queue_num (value)\n" " Set a queue region on a port\n\n" @@ -16910,6 +16914,92 @@ cmdline_parse_inst_t cmd_showport_macs = { }, }; +/* *** tx_done_cleanup *** */ +struct cmd_tx_done_cleanup_result { + cmdline_fixed_string_t clean; + cmdline_fixed_string_t port; + uint16_t port_id; + uint16_t queue_id; + uint32_t free_cnt; +}; + +static void +cmd_tx_done_cleanup_parsed(void *parsed_result, + __rte_unused struct cmdline *cl, + __rte_unused void *data) +{ + struct cmd_tx_done_cleanup_result *res = parsed_result; + struct rte_eth_dev *dev; + uint16_t port_id = res->port_id; + uint16_t queue_id = res->queue_id; + uint32_t free_cnt = res->free_cnt; + int ret; + + if (!rte_eth_dev_is_valid_port(port_id)) { + printf("Invalid port_id %u\n", port_id); + return; + } + + dev = &rte_eth_devices[port_id]; + if (queue_id >= dev->data->nb_tx_queues) { + printf("Invalid TX queue_id %u\n", queue_id); + return; + } + + if (dev->data->tx_queue_state[queue_id] != + RTE_ETH_QUEUE_STATE_STARTED) { + printf("TX queue_id %u not started!\n", queue_id); + return; + } + + /* + * rte_eth_tx_done_cleanup is a dataplane API, user must make sure + * there are no concurrent access to the same Tx queue (like + * rte_eth_tx_burst, rte_eth_dev_tx_queue_stop and so on) when this API + * called. + */ + ret = rte_eth_tx_done_cleanup(port_id, queue_id, free_cnt); + if (ret < 0) { + printf("Failed to cleanup mbuf for port %u TX queue %u " + "error desc: %s(%d)\n", + port_id, queue_id, strerror(-ret), ret); + return; + } + + printf("Cleanup port %u TX queue %u mbuf nums: %u\n", + port_id, queue_id, ret); +} + +cmdline_parse_token_string_t cmd_tx_done_cleanup_clean = + TOKEN_STRING_INITIALIZER(struct cmd_tx_done_cleanup_result, clean, + "tx_done_cleanup"); +cmdline_parse_token_string_t cmd_tx_done_cleanup_port = + TOKEN_STRING_INITIALIZER(struct cmd_tx_done_cleanup_result, port, + "port"); +cmdline_parse_token_num_t cmd_tx_done_cleanup_port_id = + TOKEN_NUM_INITIALIZER(struct cmd_tx_done_cleanup_result, port_id, + UINT16); +cmdline_parse_token_num_t cmd_tx_done_cleanup_queue_id = + TOKEN_NUM_INITIALIZER(struct cmd_tx_done_cleanup_result, queue_id, + UINT16); +cmdline_parse_token_num_t cmd_tx_done_cleanup_free_cnt = + TOKEN_NUM_INITIALIZER(struct cmd_tx_done_cleanup_result, free_cnt, + UINT32); + +cmdline_parse_inst_t cmd_tx_done_cleanup = { + .f = cmd_tx_done_cleanup_parsed, + .data = NULL, + .help_str = "tx_done_cleanup port <port_id> <queue_id> <free_cnt>", + .tokens = { + (void *)&cmd_tx_done_cleanup_clean, + (void *)&cmd_tx_done_cleanup_port, + (void *)&cmd_tx_done_cleanup_port_id, + (void *)&cmd_tx_done_cleanup_queue_id, + (void *)&cmd_tx_done_cleanup_free_cnt, + NULL, + }, +}; + /* ******************************************************************************** */ /* list of instructions */ @@ -17035,6 +17125,7 @@ cmdline_parse_ctx_t main_ctx[] = { (cmdline_parse_inst_t *)&cmd_config_rss_reta, (cmdline_parse_inst_t *)&cmd_showport_reta, (cmdline_parse_inst_t *)&cmd_showport_macs, + (cmdline_parse_inst_t *)&cmd_tx_done_cleanup, (cmdline_parse_inst_t *)&cmd_config_burst, (cmdline_parse_inst_t *)&cmd_config_thresh, (cmdline_parse_inst_t *)&cmd_config_threshold, diff --git a/doc/guides/rel_notes/release_21_05.rst b/doc/guides/rel_notes/release_21_05.rst index 23f7f0b..8077573 100644 --- a/doc/guides/rel_notes/release_21_05.rst +++ b/doc/guides/rel_notes/release_21_05.rst @@ -69,6 +69,8 @@ New Features * Added command to display Rx queue used descriptor count. ``show port (port_id) rxq (queue_id) desc used count`` + * Added command to cleanup a Tx queue's mbuf on a port. + ``tx_done_cleanup port <port_id> <queue_id> <free_cnt>`` Removed Items diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst index f59eb8a..39281f5 100644 --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst @@ -272,6 +272,13 @@ and ready to be processed by the driver on a given RX queue:: testpmd> show port (port_id) rxq (queue_id) desc used count +cleanup txq mbufs +~~~~~~~~~~~~~~~~~~~~~~~~ + +Request the driver to free mbufs currently cached by the driver for a given port's +Tx queue:: + testpmd> tx_done_cleanup port (port_id) (queue_id) (free_cnt) + show config ~~~~~~~~~~~ -- 2.7.4

7 22

[PATCH] ethdev: add queue state when retrieve queue information
by Lijun Ou 14 Apr '21

14 Apr '21

Currently, upper-layer application could get queue state only through pointers such as dev->data->tx_queue_state[queue_id], this is not the recommended way to access it. So this patch add get queue state when call rte_eth_rx_queue_info_get and rte_eth_tx_queue_info_get API. Note: The hairpin queue is not supported with above rte_eth_*x_queue_info_get, so the queue state could be RTE_ETH_QUEUE_STATE_STARTED or RTE_ETH_QUEUE_STATE_STOPPED. Note: After add queue_state field, the 'struct rte_eth_rxq_info' size remains 128B, and the 'struct rte_eth_txq_info' size remains 64B, so it could be ABI compatible. Signed-off-by: Chengwen Feng <fengchengwen(a)huawei.com> Signed-off-by: Lijun Ou <oulijun(a)huawei.com> --- doc/guides/rel_notes/release_21_05.rst | 6 ++++++ lib/librte_ethdev/rte_ethdev.c | 3 +++ lib/librte_ethdev/rte_ethdev.h | 4 ++++ 3 files changed, 13 insertions(+) diff --git a/doc/guides/rel_notes/release_21_05.rst b/doc/guides/rel_notes/release_21_05.rst index 43063e3..165b5f7 100644 --- a/doc/guides/rel_notes/release_21_05.rst +++ b/doc/guides/rel_notes/release_21_05.rst @@ -156,6 +156,12 @@ ABI Changes * No ABI change that would break compatibility with 20.11. +* Added new field ``queue_state`` to ``rte_eth_rxq_info`` structure + to provide indicated rxq queue state. + +* Added new field ``queue_state`` to ``rte_eth_txq_info`` structure + to provide indicated txq queue state. + Known Issues ------------ diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c index 3059aa5..fbd10b2 100644 --- a/lib/librte_ethdev/rte_ethdev.c +++ b/lib/librte_ethdev/rte_ethdev.c @@ -5042,6 +5042,8 @@ rte_eth_rx_queue_info_get(uint16_t port_id, uint16_t queue_id, memset(qinfo, 0, sizeof(*qinfo)); dev->dev_ops->rxq_info_get(dev, queue_id, qinfo); + qinfo->queue_state = dev->data->rx_queue_state[queue_id]; + return 0; } @@ -5082,6 +5084,7 @@ rte_eth_tx_queue_info_get(uint16_t port_id, uint16_t queue_id, memset(qinfo, 0, sizeof(*qinfo)); dev->dev_ops->txq_info_get(dev, queue_id, qinfo); + qinfo->queue_state = dev->data->tx_queue_state[queue_id]; return 0; } diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h index efda313..3b83c5a 100644 --- a/lib/librte_ethdev/rte_ethdev.h +++ b/lib/librte_ethdev/rte_ethdev.h @@ -1591,6 +1591,8 @@ struct rte_eth_rxq_info { uint8_t scattered_rx; /**< scattered packets RX supported. */ uint16_t nb_desc; /**< configured number of RXDs. */ uint16_t rx_buf_size; /**< hardware receive buffer size. */ + /**< Queues state: STARTED(1) / STOPPED(0). */ + uint8_t queue_state; } __rte_cache_min_aligned; /** @@ -1600,6 +1602,8 @@ struct rte_eth_rxq_info { struct rte_eth_txq_info { struct rte_eth_txconf conf; /**< queue config parameters. */ uint16_t nb_desc; /**< configured number of TXDs. */ + /**< Queues state: STARTED(1) / STOPPED(0). */ + uint8_t queue_state; } __rte_cache_min_aligned; /* Generic Burst mode flag definition, values can be ORed. */ -- 2.7.4

6 18

[RFC PATCH v3 0/2] scheduler: expose the topology of clusters and add cluster scheduler
by Barry Song 14 Apr '21

14 Apr '21

ARM64 server chip Kunpeng 920 has 6 clusters in each NUMA node, and each cluster has 4 cpus. All clusters share L3 cache data while each cluster has local L3 tag. On the other hand, each cluster will share some internal system bus. This means cache is much more affine inside one cluster than across clusters. +-----------------------------------+ +---------+ | +------+ +------+ +---------------------------+ | | | CPU0 | | cpu1 | | +-----------+ | | | +------+ +------+ | | | | | | +----+ L3 | | | | +------+ +------+ cluster | | tag | | | | | CPU2 | | CPU3 | | | | | | | +------+ +------+ | +-----------+ | | | | | | +-----------------------------------+ | | +-----------------------------------+ | | | +------+ +------+ +--------------------------+ | | | | | | | +-----------+ | | | +------+ +------+ | | | | | | | | L3 | | | | +------+ +------+ +----+ tag | | | | | | | | | | | | | | +------+ +------+ | +-----------+ | | | | | | +-----------------------------------+ | L3 | | data | +-----------------------------------+ | | | +------+ +------+ | +-----------+ | | | | | | | | | | | | | +------+ +------+ +----+ L3 | | | | | | tag | | | | +------+ +------+ | | | | | | | | | | ++ +-----------+ | | | +------+ +------+ |---------------------------+ | +-----------------------------------| | | +-----------------------------------| | | | +------+ +------+ +---------------------------+ | | | | | | | +-----------+ | | | +------+ +------+ | | | | | | +----+ L3 | | | | +------+ +------+ | | tag | | | | | | | | | | | | | | +------+ +------+ | +-----------+ | | | | | | +-----------------------------------+ | | +-----------------------------------+ | | | +------+ +------+ +--------------------------+ | | | | | | | +-----------+ | | | +------+ +------+ | | | | | Through the following small program, you can see the performance impact of running it in one cluster and across two clusters: struct foo { int x; int y; } f; void *thread1_fun(void *param) { int s = 0; for (int i = 0; i < 0xfffffff; i++) s += f.x; } void *thread2_fun(void *param) { int s = 0; for (int i = 0; i < 0xfffffff; i++) f.y++; } int main(int argc, char **argv) { pthread_t tid1, tid2; pthread_create(&tid1, NULL, thread1_fun, NULL); pthread_create(&tid2, NULL, thread2_fun, NULL); pthread_join(tid1, NULL); pthread_join(tid2, NULL); } While running this program in one cluster, it takes: $ time taskset -c 0,1 ./a.out real 0m0.832s user 0m1.649s sys 0m0.004s As a contrast, it takes much more time if we run the same program in two clusters: $ time taskset -c 0,4 ./a.out real 0m1.133s user 0m1.960s sys 0m0.000s 0.832/1.133 = 73%, it is a huge difference. Also, hackbench running on 4 cpus in single one cluster and 4 cpus in different clusters also shows a large contrast: * inside a cluster: root@ubuntu:~# taskset -c 0,1,2,3 hackbench -p -T -l 20000 -g 1 Running in threaded mode with 1 groups using 40 file descriptors each (== 40 tasks) Each sender will pass 20000 messages of 100 bytes Time: 4.285 * across clusters: root@ubuntu:~# taskset -c 0,4,8,12 hackbench -p -T -l 20000 -g 1 Running in threaded mode with 1 groups using 40 file descriptors each (== 40 tasks) Each sender will pass 20000 messages of 100 bytes Time: 5.524 The score is 4.285 vs 5.524, shorter time means better performance. All these testing implies that we should let the Linux scheduler use this topology to make better load balancing and WAKE_AFFINE decisions. However, the current scheduler totally has no idea of clusters. This patchset exposed the cluster topology first, then added the sched domain for cluster. While it is named as "cluster", architectures and machines can define the exact meaning of cluster as long as they have some resources sharing under llc and they can leverage the affinity of this resource to achive better scheduling performance. -v3: - rebased againest 5.11-rc2 - with respect to the comments of Valentin Schneider, Peter Zijlstra, Vincent Guittot and Mel Gorman etc. * moved the scheduler changes from arm64 to the common place for all architectures. * added SD_SHARE_CLS_RESOURCES sd_flags specifying the sched_domain where select_idle_cpu() should begin to scan from * removed redundant select_idle_cluster() function since all code is in select_idle_cpu() now. it also avoided scanning cluster cpus twice in v2 code; * redo the hackbench in one numa after the above changes Valentin suggested that select_idle_cpu() could begin to scan from domain with SD_SHARE_PKG_RESOURCES. Changing like this might be too aggressive and limit the spreading of tasks. Thus, this patch lets the architectures and machines to decide where to start by adding a new SD_SHARE_CLS_RESOURCES. Barry Song (1): scheduler: add scheduler level for clusters Jonathan Cameron (1): topology: Represent clusters of CPUs within a die. Documentation/admin-guide/cputopology.rst | 26 +++++++++++--- arch/arm64/Kconfig | 7 ++++ arch/arm64/kernel/topology.c | 2 ++ drivers/acpi/pptt.c | 60 +++++++++++++++++++++++++++++++ drivers/base/arch_topology.c | 14 ++++++++ drivers/base/topology.c | 10 ++++++ include/linux/acpi.h | 5 +++ include/linux/arch_topology.h | 5 +++ include/linux/sched/sd_flags.h | 9 +++++ include/linux/sched/topology.h | 7 ++++ include/linux/topology.h | 13 +++++++ kernel/sched/fair.c | 27 ++++++++++---- kernel/sched/topology.c | 6 ++++ 13 files changed, 181 insertions(+), 10 deletions(-) -- 2.7.4

7 19

[PATCH v1 0/2] scsi: libsas: few clean up patches
by Luo Jiaxing 13 Apr '21

13 Apr '21

Two types of errors are detected by the checkpatch. 1. Alignment between switches and cases 2. Improper use of some spaces Here are the clean up patches. Luo Jiaxing (2): scsi: libsas: make switch and case at the same indent in sas_to_ata_err() scsi: libsas: clean up for white spaces drivers/scsi/libsas/sas_ata.c | 74 ++++++++++++++++++-------------------- drivers/scsi/libsas/sas_discover.c | 2 +- drivers/scsi/libsas/sas_expander.c | 15 ++++---- 3 files changed, 43 insertions(+), 48 deletions(-) -- 2.7.4

3 4

[PATCH 0/3] Fixes for testpmd
by Lijun Ou 12 Apr '21

12 Apr '21

This series add two test bug fixes and a print style. Hongbo Zheng (1): app/testpmd: use of Rx/Tx in testpmd Huisong Li (2): app/testpmd: fix forwarding configuration when DCB test app/testpmd: remove forwarding config from parsing Rx and Tx app/test-pmd/cmdline.c | 106 ++++++++++++++++---------------- app/test-pmd/config.c | 147 +++++++++++++++++++++++++-------------------- app/test-pmd/csumonly.c | 22 +++---- app/test-pmd/icmpecho.c | 2 +- app/test-pmd/ieee1588fwd.c | 18 +++--- app/test-pmd/parameters.c | 50 +++++++-------- app/test-pmd/testpmd.c | 132 ++++++++++++++++++++-------------------- app/test-pmd/testpmd.h | 28 ++++----- app/test-pmd/txonly.c | 2 +- 9 files changed, 263 insertions(+), 244 deletions(-) -- 2.7.4

7 37

[PATCH v3 00/12] acpi: fix some coding style issues
by Xiaofei Tan 08 Apr '21

08 Apr '21

Fix some coding style issues reported by checkpatch.pl. Only cleanup and no function changes. Differences from v2 to v3: - Remove the modifications that may cause function change. Differences from v1 to v2: - Add subsystem and module name in the name of patch 05/15. - Change to use more proper module name for some patch names. Xiaofei Tan (12): ACPI: APD: fix a block comment align issue ACPI: processor: fix some coding style issues ACPI: ipmi: remove useless return statement for void function ACPI: LPSS: add a missed blank line after declarations ACPI: acpi_pad: add a missed blank line after declarations ACPI: battery: fix some coding style issues ACPI: button: fix some coding style issues ACPI: CPPC: fix some coding style issues ACPI: custom_method: fix a coding style issue ACPI: PM: add a missed blank line after declarations ACPI: sysfs: fix some coding style issues ACPI: dock: fix some coding style issues drivers/acpi/acpi_apd.c | 8 ++--- drivers/acpi/acpi_ipmi.c | 1 - drivers/acpi/acpi_lpss.c | 2 ++ drivers/acpi/acpi_pad.c | 4 +++ drivers/acpi/acpi_processor.c | 18 +++-------- drivers/acpi/battery.c | 63 ++++++++++++++++++++------------------ drivers/acpi/button.c | 9 ++---- drivers/acpi/cppc_acpi.c | 71 ++++++++++++++++++++++--------------------- drivers/acpi/custom_method.c | 2 +- drivers/acpi/device_pm.c | 3 ++ drivers/acpi/device_sysfs.c | 15 ++++++--- drivers/acpi/dock.c | 7 +++-- 12 files changed, 106 insertions(+), 97 deletions(-) -- 2.8.1

2 15

[PATCH v2] ACPI: AC: fix some coding style issues
by Xiaofei Tan 08 Apr '21

08 Apr '21

Fix some coding style issues reported by checkpatch.pl, including following types: ERROR: "foo * bar" should be "foo *bar" ERROR: code indent should use tabs where possible WARNING: Block comments use a trailing */ on a separate line WARNING: braces {} are not necessary for single statement blocks WARNING: void function return statements are not generally useful WARNING: CVS style keyword markers, these will _not_ be updated Signed-off-by: Xiaofei Tan <tanxiaofei(a)huawei.com> --- drivers/acpi/ac.c | 28 ++++++++-------------------- 1 file changed, 8 insertions(+), 20 deletions(-) diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index b86ee6e..b0cb662 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * acpi_ac.c - ACPI AC Adapter Driver ($Revision: 27 $) + * acpi_ac.c - ACPI AC Adapter Driver (Revision: 27) * * Copyright (C) 2001, 2002 Andy Grover <andrew.grover(a)intel.com> * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh(a)intel.com> @@ -78,17 +78,14 @@ static struct acpi_driver acpi_ac_driver = { struct acpi_ac { struct power_supply *charger; struct power_supply_desc charger_desc; - struct acpi_device * device; + struct acpi_device *device; unsigned long long state; struct notifier_block battery_nb; }; #define to_acpi_ac(x) power_supply_get_drvdata(x) -/* -------------------------------------------------------------------------- - AC Adapter Management - -------------------------------------------------------------------------- */ - +/* AC Adapter Management */ static int acpi_ac_get_state(struct acpi_ac *ac) { acpi_status status = AE_OK; @@ -109,9 +106,7 @@ static int acpi_ac_get_state(struct acpi_ac *ac) return 0; } -/* -------------------------------------------------------------------------- - sysfs I/F - -------------------------------------------------------------------------- */ +/* sysfs I/F */ static int get_ac_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -138,10 +133,7 @@ static enum power_supply_property ac_props[] = { POWER_SUPPLY_PROP_ONLINE, }; -/* -------------------------------------------------------------------------- - Driver Model - -------------------------------------------------------------------------- */ - +/* Driver Model */ static void acpi_ac_notify(struct acpi_device *device, u32 event) { struct acpi_ac *ac = acpi_driver_data(device); @@ -174,8 +166,6 @@ static void acpi_ac_notify(struct acpi_device *device, u32 event) acpi_notifier_call_chain(device, event, (u32) ac->state); kobject_uevent(&ac->charger->dev.kobj, KOBJ_CHANGE); } - - return; } static int acpi_ac_battery_notify(struct notifier_block *nb, @@ -282,9 +272,8 @@ static int acpi_ac_add(struct acpi_device *device) ac->battery_nb.notifier_call = acpi_ac_battery_notify; register_acpi_notifier(&ac->battery_nb); end: - if (result) { + if (result) kfree(ac); - } return result; } @@ -293,7 +282,7 @@ static int acpi_ac_add(struct acpi_device *device) static int acpi_ac_resume(struct device *dev) { struct acpi_ac *ac; - unsigned old_state; + unsigned int old_state; if (!dev) return -EINVAL; @@ -352,9 +341,8 @@ static int __init acpi_ac_init(void) } result = acpi_bus_register_driver(&acpi_ac_driver); - if (result < 0) { + if (result < 0) return -ENODEV; - } return 0; } -- 2.8.1

2 1

[PATCH 0/2] meson build fixes for hns3
by Lijun Ou 08 Apr '21

08 Apr '21

This series fix meson build for kunpeng920 and kunpeng930 boards. Chengchang Tang (2): config/arm: fix Hisilicon kunpeng920 SoC build config/arm: fix Hisilicon kunpeng930 Soc build config/arm/arm64_kunpeng920_linux_gcc | 19 +++++++++++++++ config/arm/arm64_kunpeng930_linux_gcc | 19 +++++++++++++++ config/arm/meson.build | 27 ++++++++++++++++++++++ .../linux_gsg/cross_build_dpdk_for_arm64.rst | 5 ++++ 4 files changed, 70 insertions(+) create mode 100644 config/arm/arm64_kunpeng920_linux_gcc create mode 100644 config/arm/arm64_kunpeng930_linux_gcc -- 2.7.4

8 46

[PATCH] iommu: Fix a boundary issue to avoid performance drop
by chenxiang 07 Apr '21

07 Apr '21

From: Xiang Chen <chenxiang66(a)hisilicon.com> After the change of patch ("iommu: Switch gather->end to the inclusive end"), the performace drops from 1600+K IOPS to 1200K in our kunpeng ARM64 platform. We find that the range [start1, end1) actually is joint from the range [end1, end2), but it is considered as disjoint after the change, so it needs more times of TLB sync, and spends more time on it. So fix the boundary issue to avoid performance drop. Fixes: 862c3715de8f ("iommu: Switch gather->end to the inclusive end") Signed-off-by: Xiang Chen <chenxiang66(a)hisilicon.com> --- include/linux/iommu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/iommu.h b/include/linux/iommu.h index ae8eddd..4d5bcc2 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -547,7 +547,7 @@ static inline void iommu_iotlb_gather_add_page(struct iommu_domain *domain, * structure can be rewritten. */ if (gather->pgsize != size || - end < gather->start || start > gather->end) { + end + 1 < gather->start || start > gather->end + 1) { if (gather->pgsize) iommu_iotlb_sync(domain, gather); gather->pgsize = size; -- 2.8.1

4 4

[PATCH] dma-mapping: benchmark: use the correct HiSilicon copyright
by Hao Fang 02 Apr '21

02 Apr '21

s/Hisilicon/HiSilicon/g. It should use capital S, according to https://www.hisilicon.com/en/terms-of-use. Signed-off-by: Hao Fang <fanghao11(a)huawei.com> --- kernel/dma/map_benchmark.c | 2 +- tools/testing/selftests/dma/dma_map_benchmark.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/dma/map_benchmark.c b/kernel/dma/map_benchmark.c index e0e64f8..00d6549 100644 --- a/kernel/dma/map_benchmark.c +++ b/kernel/dma/map_benchmark.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2020 Hisilicon Limited. + * Copyright (C) 2020 HiSilicon Limited. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt diff --git a/tools/testing/selftests/dma/dma_map_benchmark.c b/tools/testing/selftests/dma/dma_map_benchmark.c index fb23ce9..b492bed 100644 --- a/tools/testing/selftests/dma/dma_map_benchmark.c +++ b/tools/testing/selftests/dma/dma_map_benchmark.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2020 Hisilicon Limited. + * Copyright (C) 2020 HiSilicon Limited. */ #include <fcntl.h> -- 2.8.1

3 2

[PATCH] dma-mapping: benchmark: Add support for multi-pages map/unmap
by chenxiang 02 Apr '21

02 Apr '21

From: Xiang Chen <chenxiang66(a)hisilicon.com> Currently it only support one page map/unmap once a time for dma-map benchmark, but there are some other scenaries which need to support for multi-page map/unmap: for those multi-pages interfaces such as dma_alloc_coherent() and dma_map_sg(), the time spent on multi-pages map/unmap is not the time of a single page * npages (not linear) as it may use block description instead of page description when it is satified with the size such as 2M/1G, and also it can send a single TLB invalidation command to invalidate multi-pages instead of multi-times when RIL is enabled (which will short the time of unmap). So it is necessary to add support for multi-pages map/unmap. Add a parameter "-g" to support multi-pages map/unmap. Signed-off-by: Xiang Chen <chenxiang66(a)hisilicon.com> --- kernel/dma/map_benchmark.c | 21 ++++++++++++++------- tools/testing/selftests/dma/dma_map_benchmark.c | 20 ++++++++++++++++---- 2 files changed, 30 insertions(+), 11 deletions(-) diff --git a/kernel/dma/map_benchmark.c b/kernel/dma/map_benchmark.c index e0e64f8..a5c1b01 100644 --- a/kernel/dma/map_benchmark.c +++ b/kernel/dma/map_benchmark.c @@ -38,7 +38,8 @@ struct map_benchmark { __u32 dma_bits; /* DMA addressing capability */ __u32 dma_dir; /* DMA data direction */ __u32 dma_trans_ns; /* time for DMA transmission in ns */ - __u8 expansion[80]; /* For future use */ + __u32 granule; /* how many PAGE_SIZE will do map/unmap once a time */ + __u8 expansion[76]; /* For future use */ }; struct map_benchmark_data { @@ -58,9 +59,11 @@ static int map_benchmark_thread(void *data) void *buf; dma_addr_t dma_addr; struct map_benchmark_data *map = data; + int npages = map->bparam.granule; + u64 size = npages * PAGE_SIZE; int ret = 0; - buf = (void *)__get_free_page(GFP_KERNEL); + buf = alloc_pages_exact(size, GFP_KERNEL); if (!buf) return -ENOMEM; @@ -76,10 +79,10 @@ static int map_benchmark_thread(void *data) * 66 means evertything goes well! 66 is lucky. */ if (map->dir != DMA_FROM_DEVICE) - memset(buf, 0x66, PAGE_SIZE); + memset(buf, 0x66, size); map_stime = ktime_get(); - dma_addr = dma_map_single(map->dev, buf, PAGE_SIZE, map->dir); + dma_addr = dma_map_single(map->dev, buf, size, map->dir); if (unlikely(dma_mapping_error(map->dev, dma_addr))) { pr_err("dma_map_single failed on %s\n", dev_name(map->dev)); @@ -93,7 +96,7 @@ static int map_benchmark_thread(void *data) ndelay(map->bparam.dma_trans_ns); unmap_stime = ktime_get(); - dma_unmap_single(map->dev, dma_addr, PAGE_SIZE, map->dir); + dma_unmap_single(map->dev, dma_addr, size, map->dir); unmap_etime = ktime_get(); unmap_delta = ktime_sub(unmap_etime, unmap_stime); @@ -112,7 +115,7 @@ static int map_benchmark_thread(void *data) } out: - free_page((unsigned long)buf); + free_pages_exact(buf, size); return ret; } @@ -203,7 +206,6 @@ static long map_benchmark_ioctl(struct file *file, unsigned int cmd, struct map_benchmark_data *map = file->private_data; void __user *argp = (void __user *)arg; u64 old_dma_mask; - int ret; if (copy_from_user(&map->bparam, argp, sizeof(map->bparam))) @@ -234,6 +236,11 @@ static long map_benchmark_ioctl(struct file *file, unsigned int cmd, return -EINVAL; } + if (map->bparam.granule < 1 || map->bparam.granule > 1024) { + pr_err("invalid granule size\n"); + return -EINVAL; + } + switch (map->bparam.dma_dir) { case DMA_MAP_BIDIRECTIONAL: map->dir = DMA_BIDIRECTIONAL; diff --git a/tools/testing/selftests/dma/dma_map_benchmark.c b/tools/testing/selftests/dma/dma_map_benchmark.c index fb23ce9..6f2caa6 100644 --- a/tools/testing/selftests/dma/dma_map_benchmark.c +++ b/tools/testing/selftests/dma/dma_map_benchmark.c @@ -40,7 +40,8 @@ struct map_benchmark { __u32 dma_bits; /* DMA addressing capability */ __u32 dma_dir; /* DMA data direction */ __u32 dma_trans_ns; /* time for DMA transmission in ns */ - __u8 expansion[80]; /* For future use */ + __u32 granule; /* how many PAGE_SIZE will do map/unmap once a time */ + __u8 expansion[76]; /* For future use */ }; int main(int argc, char **argv) @@ -51,11 +52,13 @@ int main(int argc, char **argv) int threads = 1, seconds = 20, node = -1; /* default dma mask 32bit, bidirectional DMA */ int bits = 32, xdelay = 0, dir = DMA_MAP_BIDIRECTIONAL; + /* default granule 1 PAGESIZE */ + int granule = 1; int cmd = DMA_MAP_BENCHMARK; char *p; - while ((opt = getopt(argc, argv, "t:s:n:b:d:x:")) != -1) { + while ((opt = getopt(argc, argv, "t:s:n:b:d:x:g:")) != -1) { switch (opt) { case 't': threads = atoi(optarg); @@ -75,6 +78,9 @@ int main(int argc, char **argv) case 'x': xdelay = atoi(optarg); break; + case 'g': + granule = atoi(optarg); + break; default: return -1; } @@ -110,6 +116,11 @@ int main(int argc, char **argv) exit(1); } + if (granule < 1 || granule > 1024) { + fprintf(stderr, "invalid granule size\n"); + exit(1); + } + fd = open("/sys/kernel/debug/dma_map_benchmark", O_RDWR); if (fd == -1) { perror("open"); @@ -123,14 +134,15 @@ int main(int argc, char **argv) map.dma_bits = bits; map.dma_dir = dir; map.dma_trans_ns = xdelay; + map.granule = granule; if (ioctl(fd, cmd, &map)) { perror("ioctl"); exit(1); } - printf("dma mapping benchmark: threads:%d seconds:%d node:%d dir:%s\n", - threads, seconds, node, dir[directions]); + printf("dma mapping benchmark: threads:%d seconds:%d node:%d dir:%s granule: %d\n", + threads, seconds, node, dir[directions], granule); printf("average map latency(us):%.1f standard deviation:%.1f\n", map.avg_map_100ns/10.0, map.map_stddev/10.0); printf("average unmap latency(us):%.1f standard deviation:%.1f\n", -- 2.8.1

3 2

[PATCH v2 00/15] acpi: fix some coding style issues
by Xiaofei Tan 02 Apr '21

02 Apr '21

Fix some coding style issues reported by checkpatch.pl. Differences from v1 to v2: - Add subsystem and module name in the name of patch 05/15. - Change to use more proper module name for some patch names. Xiaofei Tan (15): ACPI: APD: fix a block comment align issue ACPI: processor: fix some coding style issues ACPI: debug: fix some coding style issues ACPI: table: replace __attribute__((packed)) by __packed ACPI: ipmi: remove useless return statement for void function ACPI: LPSS: fix some coding style issues ACPI: memhotplug: fix a coding style issue ACPI: acpi_pad: fix a coding style issue ACPI: battery: fix some coding style issues ACPI: button: fix some coding style issues ACPI: CPPC: fix some coding style issues ACPI: custom_method: fix a coding style issue ACPI: PM: fix some coding style issues ACPI: sysfs: fix some coding style issues ACPI: dock: fix some coding style issues drivers/acpi/acpi_apd.c | 8 ++--- drivers/acpi/acpi_dbg.c | 40 +++++++++++------------- drivers/acpi/acpi_fpdt.c | 6 ++-- drivers/acpi/acpi_ipmi.c | 1 - drivers/acpi/acpi_lpss.c | 4 ++- drivers/acpi/acpi_memhotplug.c | 2 +- drivers/acpi/acpi_pad.c | 4 +++ drivers/acpi/acpi_processor.c | 18 +++-------- drivers/acpi/battery.c | 64 +++++++++++++++++++++---------------- drivers/acpi/button.c | 10 +++--- drivers/acpi/cppc_acpi.c | 71 +++++++++++++++++++++--------------------- drivers/acpi/custom_method.c | 2 +- drivers/acpi/device_pm.c | 3 ++ drivers/acpi/device_sysfs.c | 15 ++++++--- drivers/acpi/dock.c | 7 +++-- 15 files changed, 138 insertions(+), 117 deletions(-) -- 2.8.1

7 36

[PATCH v1] ata: ahci: Disable SXS for Hisilicon Kunpeng920
by Luo Jiaxing 31 Mar '21

31 Mar '21

From: Xingui Yang <yangxingui(a)huawei.com> On Hisilicon Kunpeng920, ESP is set to 1 by default for all ports of SATA controller. In some scenarios, some ports are not external SATA ports, and it cause disks connected to these ports to be identified as removable disks. So disable the SXS capability on the software side to prevent users from mistakenly considering non-removable disks as removable disks and performing related operations. Signed-off-by: Xingui Yang <yangxingui(a)huawei.com> Signed-off-by: Luo Jiaxing <luojiaxing(a)huawei.com> Reviewed-by: John Garry <john.garry(a)huawei.com> --- drivers/ata/ahci.c | 5 +++++ drivers/ata/ahci.h | 1 + drivers/ata/libahci.c | 5 +++++ 3 files changed, 11 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 00ba8e5..33192a8 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1772,6 +1772,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) hpriv->flags |= AHCI_HFLAG_NO_DEVSLP; #ifdef CONFIG_ARM64 + if (pdev->vendor == PCI_VENDOR_ID_HUAWEI && + pdev->device == 0xa235 && + pdev->revision < 0x30) + hpriv->flags |= AHCI_HFLAG_NO_SXS; + if (pdev->vendor == 0x177d && pdev->device == 0xa01c) hpriv->irq_handler = ahci_thunderx_irq_handler; #endif diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 98b8baa..d1f284f 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -242,6 +242,7 @@ enum { suspend/resume */ AHCI_HFLAG_IGN_NOTSUPP_POWER_ON = (1 << 27), /* ignore -EOPNOTSUPP from phy_power_on() */ + AHCI_HFLAG_NO_SXS = (1 << 28), /* SXS not supported */ /* ap->flags bits */ diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index ea5bf5f..fec2e97 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -493,6 +493,11 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) cap |= HOST_CAP_ALPM; } + if ((cap & HOST_CAP_SXS) && (hpriv->flags & AHCI_HFLAG_NO_SXS)) { + dev_info(dev, "controller does not support SXS, disabling CAP_SXS\n"); + cap &= ~HOST_CAP_SXS; + } + if (hpriv->force_port_map && port_map != hpriv->force_port_map) { dev_info(dev, "forcing port_map 0x%x -> 0x%x\n", port_map, hpriv->force_port_map); -- 2.7.4

3 4

[PATCH RFC for-next 1/1] arm64: sve: Fix some compile errors about sve_cond_update_zcr_vq
by Xiaofei Tan 31 Mar '21

31 Mar '21

There are some compile errors of ARM64 KVM when ARM64_SVE is not selected, in the locations of sve_cond_update_zcr_vq used. One error log is as following: CC arch/arm64/kvm/sys_regs.o In file included from arch/arm64/kvm/hyp/vhe/switch.c:8:0: ./arch/arm64/kvm/hyp/include/hyp/switch.h: In function ‘__hyp_sve_restore_guest’: ./arch/arm64/kvm/hyp/include/hyp/switch.h:220:2: error: implicit declaration of function ‘sve_cond_update_zcr_vq’; did you mean ‘kvm_pmu_update_run’? [-Werror=implicit-function-declaration] sve_cond_update_zcr_vq(vcpu_sve_max_vq(vcpu) - 1, SYS_ZCR_EL2); ^~~~~~~~~~~~~~~~~~~~~~ kvm_pmu_update_run The root cause is that sve_cond_update_zcr_vq is not defined when ARM64_SVE is not selected. Fix it by adding an empty definition when CONFIG_ARM64_SVE=n. Signed-off-by: Xiaofei Tan <tanxiaofei(a)huawei.com> --- arch/arm64/include/asm/fpsimd.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h index 05c9c55..3f93b63 100644 --- a/arch/arm64/include/asm/fpsimd.h +++ b/arch/arm64/include/asm/fpsimd.h @@ -168,6 +168,8 @@ static inline int sve_get_current_vl(void) static inline void sve_user_disable(void) { BUILD_BUG(); } static inline void sve_user_enable(void) { BUILD_BUG(); } +#define sve_cond_update_zcr_vq(val, reg) + static inline void sve_init_vq_map(void) { } static inline void sve_update_vq_map(void) { } static inline int sve_verify_vq_map(void) { return 0; } -- 2.8.1

2 1

[RESEND net-next 0/4] net: remove repeated words
by Huazhong Tan 31 Mar '21

31 Mar '21

This patch-set removes some repeated words in comments. Peng Li (4): net: i40e: remove repeated words net: bonding: remove repeated word net: phy: remove repeated word net: ipa: remove repeated words drivers/net/bonding/bond_alb.c | 2 +- drivers/net/ethernet/intel/i40e/i40e_main.c | 4 ++-- drivers/net/ipa/ipa_endpoint.c | 4 ++-- drivers/net/phy/mdio_bus.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) -- 2.7.4

6 9

[PATCH v2] iommu/arm-smmu-v3: Add a check to avoid invalid iotlb sync
by chenxiang 30 Mar '21

30 Mar '21

From: Xiang Chen <chenxiang66(a)hisilicon.com> It may send a invalid tlb sync for smmuv3 if iotlb_gather is not valid (iotlb_gather->pgsize = 0). So add a check to avoid invalid iotlb sync for it. Signed-off-by: Xiang Chen <chenxiang66(a)hisilicon.com> --- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c index 8594b4a..941ba54 100644 --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c @@ -2305,6 +2305,9 @@ static void arm_smmu_iotlb_sync(struct iommu_domain *domain, { struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain); + if (!gather->pgsize) + return; + arm_smmu_tlb_inv_range_domain(gather->start, gather->end - gather->start + 1, gather->pgsize, true, smmu_domain); -- 2.8.1

2 1

[PATCH] iommu: Add a check to avoid invalid iotlb sync
by chenxiang 30 Mar '21

30 Mar '21

From: Xiang Chen <chenxiang66(a)hisilicon.com> Currently it will send a iotlb sync at end of iommu unmap even if iotlb_gather is not valid (iotlb_gather->pgsize = 0). Actually it is not necessary, so add a check to avoid invalid iotlb sync. Signed-off-by: Xiang Chen <chenxiang66(a)hisilicon.com> --- include/linux/iommu.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/linux/iommu.h b/include/linux/iommu.h index 9ca6e6b..6afa61b 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -529,6 +529,9 @@ static inline void iommu_flush_iotlb_all(struct iommu_domain *domain) static inline void iommu_iotlb_sync(struct iommu_domain *domain, struct iommu_iotlb_gather *iotlb_gather) { + if (!iotlb_gather->pgsize) + return; + if (domain->ops->iotlb_sync) domain->ops->iotlb_sync(domain, iotlb_gather); -- 2.8.1

4 5

[PATCH net-next 0/4] net: remove repeated words
by Huazhong Tan 30 Mar '21

30 Mar '21

This patch-set removes some repeated words in comments. Peng Li (4): net: i40e: remove repeated words net: bonding: remove repeated word net: phy: remove repeated word net: ipa: remove repeated words drivers/net/bonding/bond_alb.c | 2 +- drivers/net/ethernet/intel/i40e/i40e_main.c | 4 ++-- drivers/net/ipa/ipa_endpoint.c | 4 ++-- drivers/net/phy/mdio_bus.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) -- 2.7.4

1 5

Re: [PATCH] libata: Increase the timeout of command ATA_CMD_READ_LOG_DMA_EXT
by chenxiang (M) 30 Mar '21

30 Mar '21

Ping.... 在 2020/10/15 9:57, chenxiang 写道: > From: Xiang Chen <chenxiang66(a)hisilicon.com> > > ATA_CMD_READ_LOG_DMA_EXT command normally uses the common internal command > default timeout (5s), and it is adequate in most situations. But it is not > enough for some disks such as ST4000NM0035 which causes qc timeout > sometimes as follows: > ... > [ 157.284284] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 > [ 157.290124] sas: ata8: end_device-4:0:2: dev error handler > [ 157.290128] sas: ata9: end_device-4:0:8: dev error handler > [ 157.290131] sas: ata10: end_device-4:0:11: dev error handler > [ 164.588391] ata9.00: qc timeout (cmd 0x47) > [ 164.588393] ata8.00: qc timeout (cmd 0x47) > [ 164.588395] ata10.00: qc timeout (cmd 0x47) > [ 166.582572] ata10.00: READ LOG DMA EXT failed, trying PIO > [ 166.587960] ata10.00: NCQ Send/Recv Log not supported > [ 166.592997] ata10.00: ATA-10: ST4000NM0035-1V4107, TN03, max UDMA/133 > [ 166.599414] ata10.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32) > [ 166.606011] ata10.00: failed to set xfermode (err_mask=0x40) > [ 166.659253] ata8.00: READ LOG DMA EXT failed, trying PIO > [ 166.664559] ata8.00: NCQ Send/Recv Log not supported > [ 166.669506] ata8.00: ATA-10: ST4000NM0035-1V4107, TN03, max UDMA/133 > [ 166.675837] ata8.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32) > [ 166.682343] ata8.00: failed to set xfermode (err_mask=0x40) > [ 166.743458] ata9.00: READ LOG DMA EXT failed, trying PIO > [ 166.748765] ata9.00: NCQ Send/Recv Log not supported > [ 166.753713] ata9.00: ATA-10: ST4000NM0035-1V4107, TN03, max UDMA/133 > [ 166.760045] ata9.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32) > [ 166.766553] ata9.00: failed to set xfermode (err_mask=0x40) > [ 168.886378] ata10.00: configured for UDMA/133 > [ 168.999943] ata8.00: configured for UDMA/133 > [ 169.050801] ata9.00: configured for UDMA/133 > [ 169.055071] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 > ... > Actually it may takes about 9s to complete the command for disk ST4000NM0035 > sometimes. So to avoid the issue, increase the timeout of command > ATA_CMD_READ_LOG_DMA_EXT from 5s to 15s. > > Signed-off-by: Xiang Chen <chenxiang66(a)hisilicon.com> > Reviewed-by: John Garry <john.garry(a)huawei.com> > --- > drivers/ata/libata-eh.c | 9 +++++++++ > include/linux/libata.h | 2 +- > 2 files changed, 10 insertions(+), 1 deletion(-) > > diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c > index 474c6c3..6db9474 100644 > --- a/drivers/ata/libata-eh.c > +++ b/drivers/ata/libata-eh.c > @@ -100,6 +100,13 @@ static const unsigned long ata_eh_flush_timeouts[] = { > ULONG_MAX, > }; > > +static const unsigned long ata_eh_read_log_ext_timeouts[] = { > + 15000, > + 15000, > + 30000, > + ULONG_MAX, > +}; > + > static const unsigned long ata_eh_other_timeouts[] = { > 5000, /* same rationale as identify timeout */ > 10000, /* ditto */ > @@ -139,6 +146,8 @@ ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = { > .timeouts = ata_eh_other_timeouts, }, > { .commands = CMDS(ATA_CMD_FLUSH, ATA_CMD_FLUSH_EXT), > .timeouts = ata_eh_flush_timeouts }, > + { .commands = CMDS(ATA_CMD_READ_LOG_DMA_EXT, ATA_CMD_READ_LOG_EXT), > + .timeouts = ata_eh_read_log_ext_timeouts }, > }; > #undef CMDS > > diff --git a/include/linux/libata.h b/include/linux/libata.h > index b0bd30e..bcc68b3 100644 > --- a/include/linux/libata.h > +++ b/include/linux/libata.h > @@ -390,7 +390,7 @@ enum { > /* This should match the actual table size of > * ata_eh_cmd_timeout_table in libata-eh.c. > */ > - ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 6, > + ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 7, > > /* Horkage types. May be set by libata or controller on drives > (some horkage may be drive/controller pair dependent */

1 0

[PATCH net-next 0/9] net: hns3: misc updates for -next
by Huazhong Tan 30 Mar '21

30 Mar '21

This series include some updates for the HNS3 ethernet driver. #1 & #2 fix two bugs in commit fc4243b8de8b ("net: hns3: refactor flow director configuration"). #3 modifies a potential overflow risk. #4 remove the rss_size limitation when updating rss size. #5 optimizes the resetting of tqp. #6 & #7 add updates for the IO path. #8 expands the tc config command. #9 adds a new stats. Guangbin Huang (1): net: hns3: remediate a potential overflow risk of bd_num_list Guojia Liao (1): net: hns3: expand the tc config command Jian Shen (3): net: hns3: fix missing rule state assignment net: hns3: fix use-after-free issue for hclge_add_fd_entry_common() net: hns3: remove the rss_size limitation by vector num Yufeng Mo (1): net: hns3: optimize the process of queue reset Yunsheng Lin (3): net: hns3: add handling for xmit skb with recursive fraglist net: hns3: add tx send size handling for tso skb net: hns3: add stats logging when skb padding fails drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 153 +++++++++----- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 9 +- drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 2 + .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 8 +- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 219 ++++++++++++--------- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 3 +- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 26 ++- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 9 - .../ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.h | 7 +- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 62 ++++-- 11 files changed, 321 insertions(+), 179 deletions(-) -- 2.7.4

2 10