April 2021 - Linuxarm - mailweb.openeuler.org

Re: [dpdk-dev] [PATCH V6] ethdev: add queue state when retrieve queue information
by Thomas Monjalon 19 Apr '21

19 Apr '21

19/04/2021 04:03, Lijun Ou: > --- a/doc/guides/rel_notes/release_21_05.rst > +++ b/doc/guides/rel_notes/release_21_05.rst > +* **Enhanced function for getting rxq/txq info ABI.** Reword: Added queue state in queried Rx/Tx queue info > + * Added new field ``queue_state`` to ``rte_eth_rxq_info`` structure to > + provide indicated rxq queue state. s/rxq queue/Rx queue/ > + * Added new field ``queue_state`` to ``rte_eth_txq_info`` structure to > + provide indicated txq queue state. s/txq queue/Tx queue/ Thanks

2 1

Re: [dpdk-dev] [PATCH V4 0/3] add Hisilicon kunpeng CPU support
by Thomas Monjalon 19 Apr '21

19 Apr '21

16/04/2021 11:57, Lijun Ou: > Chengchang Tang (3): > config/arm: add Hisilicon kunpeng implementer > config/arm: add kunpeng920 cross target > config/arm: add kunpeng930 cross target Squashed, sorted SoCs alphabetically with others, and applied.

1 0

Re: [PATCH v3] iommu/iova: put free_iova_mem() outside of spinlock iova_rbtree_lock
by John Garry 19 Apr '21

19 Apr '21

On 19/04/2021 08:13, chenxiang wrote: > From: Xiang Chen<chenxiang66(a)hisilicon.com> > > It is not necessary to put free_iova_mem() inside of spinlock/unlock > iova_rbtree_lock which only leads to more completion for the spinlock. > It has a small promote on the performance after the change. And also > rename private_free_iova() as remove_iova() because the function will not > free iova after that change. > > Signed-off-by: Xiang Chen<chenxiang66(a)hisilicon.com> I think that you will need to resend after v5.13-rc1 comes out, however: Reviewed-by: John Garry <john.garry(a)huawei.com> > --- > drivers/iommu/

1 0

Re: [PATCH V5] ethdev: add queue state when retrieve queue information
by Ferruh Yigit 18 Apr '21

18 Apr '21

On 4/17/2021 4:09 AM, Lijun Ou wrote: > Currently, upper-layer application could get queue state only > through pointers such as dev->data->tx_queue_state[queue_id], > this is not the recommended way to access it. So this patch > add get queue state when call rte_eth_rx_queue_info_get and > rte_eth_tx_queue_info_get API. > > Note: After add queue_state field, the 'struct rte_eth_rxq_info' size > remains 128B, and the 'struct rte_eth_txq_info' size remains 64B, so > it could be ABI compatible. > > Signed-off-by: Chengwen Feng <fengchengwen(a)huawei.com> > Signed-off-by: Lijun Ou <oulijun(a)huawei.com> > Acked-by: Konstantin Ananyev <konstantin.ananyev(a)intel.com> > --- > V4->V5: > - Add acked-by > - add a note to the "New features" section to annouce the new feature. > > V3->V4: > - update libabigail.abignore for removing the CI warnings > > V2->V3: > - rewrite the commit log and delete the part Note > - rewrite tht comments for queue state > - move the queue_state definition locations > > V1->V2: > - move queue state defines to public file > --- > doc/guides/rel_notes/release_21_05.rst | 6 ++++++ > lib/librte_ethdev/ethdev_driver.h | 7 ------- > lib/librte_ethdev/rte_ethdev.c | 3 +++ > lib/librte_ethdev/rte_ethdev.h | 9 +++++++++ > 4 files changed, 18 insertions(+), 7 deletions(-) missing 'libabigail.abignore' that was in v4?

1 0

Re: [dpdk-dev] [PATCH V4] ethdev: add queue state when retrieve queue information
by Ananyev, Konstantin 16 Apr '21

16 Apr '21

> Currently, upper-layer application could get queue state only > through pointers such as dev->data->tx_queue_state[queue_id], > this is not the recommended way to access it. So this patch > add get queue state when call rte_eth_rx_queue_info_get and > rte_eth_tx_queue_info_get API. > > Note: After add queue_state field, the 'struct rte_eth_rxq_info' size > remains 128B, and the 'struct rte_eth_txq_info' size remains 64B, so > it could be ABI compatible. > > Signed-off-by: Chengwen Feng <fengchengwen(a)huawei.com> > Signed-off-by: Lijun Ou <oulijun(a)huawei.com> > --- > devtools/libabigail.abignore | 12 +++++++++++- > doc/guides/rel_notes/release_21_05.rst | 6 ++++++ > lib/librte_ethdev/ethdev_driver.h | 7 ------- > lib/librte_ethdev/rte_ethdev.c | 3 +++ > lib/librte_ethdev/rte_ethdev.h | 9 +++++++++ > 5 files changed, 29 insertions(+), 8 deletions(-) > > diff --git a/devtools/libabigail.abignore b/devtools/libabigail.abignore > index 6c0b389..54542a8 100644 > --- a/devtools/libabigail.abignore > +++ b/devtools/libabigail.abignore > @@ -19,4 +19,14 @@ > ; Ignore fields inserted in cacheline boundary of rte_cryptodev > [suppress_type] > name = rte_cryptodev > - has_data_member_inserted_between = {offset_after(attached), end} > \ No newline at end of file > + has_data_member_inserted_between = {offset_after(attached), end} > + > +; Ignore fields inserted in alignment hole of rte_eth_rxq_info > +[suppress_type] > + name = rte_eth_rxq_info > + has_data_member_inserted_at = offset_after(scattered_rx) > + > +; Ignore fields inserted in cacheline boundary of rte_eth_txq_info > +[suppress_type] > + name = rte_eth_txq_info > + has_data_member_inserted_between = {offset_after(nb_desc), end} > diff --git a/doc/guides/rel_notes/release_21_05.rst b/doc/guides/rel_notes/release_21_05.rst > index 3bd7757..c6e45e2 100644 > --- a/doc/guides/rel_notes/release_21_05.rst > +++ b/doc/guides/rel_notes/release_21_05.rst > @@ -251,6 +251,12 @@ ABI Changes > function was already marked as internal in the API documentation for it, > and was not for use by external applications. > > +* Added new field ``queue_state`` to ``rte_eth_rxq_info`` structure > + to provide indicated rxq queue state. > + > +* Added new field ``queue_state`` to ``rte_eth_txq_info`` structure > + to provide indicated txq queue state. > + > > Known Issues > ------------ > diff --git a/lib/librte_ethdev/ethdev_driver.h b/lib/librte_ethdev/ethdev_driver.h > index 113129d..40e474a 100644 > --- a/lib/librte_ethdev/ethdev_driver.h > +++ b/lib/librte_ethdev/ethdev_driver.h > @@ -952,13 +952,6 @@ struct eth_dev_ops { > }; > > /** > - * RX/TX queue states > - */ > -#define RTE_ETH_QUEUE_STATE_STOPPED 0 > -#define RTE_ETH_QUEUE_STATE_STARTED 1 > -#define RTE_ETH_QUEUE_STATE_HAIRPIN 2 > - > -/** > * @internal > * Check if the selected Rx queue is hairpin queue. > * > diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c > index 6b5cfd6..ab188ec 100644 > --- a/lib/librte_ethdev/rte_ethdev.c > +++ b/lib/librte_ethdev/rte_ethdev.c > @@ -5042,6 +5042,8 @@ rte_eth_rx_queue_info_get(uint16_t port_id, uint16_t queue_id, > > memset(qinfo, 0, sizeof(*qinfo)); > dev->dev_ops->rxq_info_get(dev, queue_id, qinfo); > + qinfo->queue_state = dev->data->rx_queue_state[queue_id]; > + > return 0; > } > > @@ -5082,6 +5084,7 @@ rte_eth_tx_queue_info_get(uint16_t port_id, uint16_t queue_id, > > memset(qinfo, 0, sizeof(*qinfo)); > dev->dev_ops->txq_info_get(dev, queue_id, qinfo); > + qinfo->queue_state = dev->data->tx_queue_state[queue_id]; > > return 0; > } > diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h > index 3b773b6..a0d01d2 100644 > --- a/lib/librte_ethdev/rte_ethdev.h > +++ b/lib/librte_ethdev/rte_ethdev.h > @@ -1588,6 +1588,13 @@ struct rte_eth_dev_info { > }; > > /** > + * RX/TX queue states > + */ > +#define RTE_ETH_QUEUE_STATE_STOPPED 0 > +#define RTE_ETH_QUEUE_STATE_STARTED 1 > +#define RTE_ETH_QUEUE_STATE_HAIRPIN 2 > + > +/** > * Ethernet device RX queue information structure. > * Used to retrieve information about configured queue. > */ > @@ -1595,6 +1602,7 @@ struct rte_eth_rxq_info { > struct rte_mempool *mp; /**< mempool used by that queue. */ > struct rte_eth_rxconf conf; /**< queue config parameters. */ > uint8_t scattered_rx; /**< scattered packets RX supported. */ > + uint8_t queue_state; /**< one of RTE_ETH_QUEUE_STATE_*. */ > uint16_t nb_desc; /**< configured number of RXDs. */ > uint16_t rx_buf_size; /**< hardware receive buffer size. */ > } __rte_cache_min_aligned; > @@ -1606,6 +1614,7 @@ struct rte_eth_rxq_info { > struct rte_eth_txq_info { > struct rte_eth_txconf conf; /**< queue config parameters. */ > uint16_t nb_desc; /**< configured number of TXDs. */ > + uint8_t queue_state; /**< one of RTE_ETH_QUEUE_STATE_*. */ > } __rte_cache_min_aligned; > > /* Generic Burst mode flag definition, values can be ORed. */ > -- Acked-by: Konstantin Ananyev <konstantin.ananyev(a)intel.com> > 2.7.4

1 0

Re: [PATCH v2] iommu/iova: put free_iova_mem() outside of spinlock iova_rbtree_lock
by John Garry 16 Apr '21

16 Apr '21

On 16/04/2021 04:30, chenxiang (M) wrote: >> >> you need to make this: >> if (iova) >> free_iova_mem(iova); >> >> as free_iova_mem(iova) dereferences iova: >> >> if (iova->pfn_lo != IOVA_ANCHOR) >> kmem_cache_free(iova_cache, iova) >> >> So if iova were NULL, we crash. >> >> Or you can make free_iova_mem() NULL safe. > > Right, it has the issue. What about changing it as below? > > @@ -472,10 +472,13 @@ free_iova(struct iova_domain *iovad, unsigned long > pfn) > > spin_lock_irqsave(&iovad->iova_rbtree_lock, flags); > iova = private_find_iova(iovad, pfn); > - if (iova) > - private_free_iova(iovad, iova); > + if (!iova) { > + spin_unlock_irqrestore(&iovad->iova_rbtree_lock, flags); > + return; > + } > + remove_iova(iovad, iova); > spin_unlock_irqrestore(&iovad->iova_rbtree_lock, flags); > - > + free_iova_mem(iova); > } > EXPORT_SYMBOL_GPL(free_iova); I don't feel too strongly about how it's done. Please note that kmem_cache_free() is not NULL safe. So the NULL check could be added in free_iova_mem(), but we prob don't want silent free_iova_mem(NULL) calls, so I would stick with changing free_iova(). Thanks, John

2 1

Re: [PATCH V3] ethdev: add queue state when retrieve queue information
by Ferruh Yigit 16 Apr '21

16 Apr '21

On 4/15/2021 3:40 AM, Lijun Ou wrote: > Currently, upper-layer application could get queue state only > through pointers such as dev->data->tx_queue_state[queue_id], > this is not the recommended way to access it. So this patch > add get queue state when call rte_eth_rx_queue_info_get and > rte_eth_tx_queue_info_get API. > > Note: After add queue_state field, the 'struct rte_eth_rxq_info' size > remains 128B, and the 'struct rte_eth_txq_info' size remains 64B, so > it could be ABI compatible. > > Signed-off-by: Chengwen Feng <fengchengwen(a)huawei.com> > Signed-off-by: Lijun Ou <oulijun(a)huawei.com> Looks good to me, but it is causing an ABI error as we already discussed before as that is false positive. Ray, David, Should we add any exception to libabigail.abignore for this?

3 7

[PATCH net v4 0/2] fix packet stuck problem for lockless qdisc
by Yunsheng Lin 16 Apr '21

16 Apr '21

This patchset fixes the packet stuck problem mentioned in [1]. Patch 1: Add STATE_MISSED flag to fix packet stuck problem. Patch 2: Fix a tx_action rescheduling problem after STATE_MISSED flag is added in patch 1. V4: Change STATE_NEED_RESCHEDULE to STATE_MISSED and add patch 2. [1]. https://lkml.org/lkml/2019/10/9/42 Yunsheng Lin (2): net: sched: fix packet stuck problem for lockless qdisc net: sched: fix endless tx action reschedule during deactivation include/net/pkt_sched.h | 7 +------ include/net/sch_generic.h | 37 ++++++++++++++++++++++++++++++++++++- net/core/dev.c | 26 ++++++++++++++++++++++---- net/sched/sch_generic.c | 16 +++++++++++++++- 4 files changed, 74 insertions(+), 12 deletions(-) -- 2.7.4

1 0

[PATCH RESEND net-next 0/2] net: hns3: updates for -next
by Huazhong Tan 16 Apr '21

16 Apr '21

This series adds support for pushing link status to VFs for the HNS3 ethernet driver. Guangbin Huang (2): net: hns3: PF add support for pushing link status to VFs net: hns3: VF not request link status when PF support push link status feature drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h | 3 ++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 35 +++++++++++++++++++++- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 1 + .../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 12 ++++---- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 8 +++-- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 1 + .../ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c | 6 ++++ 7 files changed, 55 insertions(+), 11 deletions(-) -- 2.7.4

2 3

[RFC PATCH 0/3] vfio/hisilicon: add acc live migration driver
by Longfang Liu 16 Apr '21

16 Apr '21

The live migration solution relies on the vfio_device_migration_info protocol. The structure vfio_device_migration_info is placed at the 0th offset of the VFIO_REGION_SUBTYPE_MIGRATION region to get and set VFIO device related migration information. Field accesses from this structure are only supported at their native width and alignment. Otherwise, the result is undefined and vendor drivers should return an error. (1).The driver framework is based on vfio_pci_register_dev_region() of vfio-pci, and then a new live migration region is added, and the live migration is realized through the ops of this region. (2).In order to ensure the compatibility of the devices before and after the migration, the device compatibility information check will be performed in the Pre-copy stage. If the check fails, an error will be returned and the source VM will exit the migration function. (3).After the compatibility check is passed, it will enter the Stop-and-copy stage. At this time, all the live migration data will be copied, and then saved to the VF device of the destination, and then the VF device of the destination will be started and the VM of the source will be exited. Longfang Liu (3): vfio/hisilicon: add acc live migration driver vfio/hisilicon: register the driver to vfio vfio/hisilicom: add debugfs for driver drivers/vfio/pci/Kconfig | 8 + drivers/vfio/pci/Makefile | 1 + drivers/vfio/pci/hisilicon/acc_vf_migration.c | 1337 +++++++++++++++++++++++++ drivers/vfio/pci/hisilicon/acc_vf_migration.h | 170 ++++ drivers/vfio/pci/vfio_pci.c | 11 + drivers/vfio/pci/vfio_pci_private.h | 9 + 6 files changed, 1536 insertions(+) create mode 100644 drivers/vfio/pci/hisilicon/acc_vf_migration.c create mode 100644 drivers/vfio/pci/hisilicon/acc_vf_migration.h -- 2.8.1

3 5

2024

2023

2022

2021

2020

Linuxarm April 2021