August 2021 - Linuxarm - mailweb.openeuler.org

[PATCH net-next v2 0/4] add frag page support in page pool
by Yunsheng Lin 25 Mar '22

25 Mar '22

This patchset adds frag page support in page pool and enable skb's page frag recycling based on page pool in hns3 drvier. V2: 1. resend based on the latest net-next. V1: 1. avoid atomic_long_read() in case of freeing or draining page frag, and drop RFC tag. RFC v6: 1. Disable frag page support in system 32-bit arch and 64-bit DMA. RFC v5: 1. Rename dma_addr[0] to pp_frag_count and adjust codes according to the rename. RFC v4: 1. Use the dma_addr[1] to store bias. 2. Default to a pagecnt_bias of PAGE_SIZE - 1. 3. other minor comment suggested by Alexander. RFC v3: 1. Implement the semantic of "page recycling only wait for the page pool user instead of all user of a page" 2. Support the frag allocation of different sizes 3. Merge patch 4 & 5 to one patch as it does not make sense to use page_pool_dev_alloc_pages() API directly with elevated refcnt. 4. other minor comment suggested by Alexander. RFC v2: 1. Split patch 1 to more reviewable one. 2. Repurpose the lower 12 bits of the dma address to store the pagecnt_bias as suggested by Alexander. 3. support recycling to pool->alloc for elevated refcnt case too. Yunsheng Lin (4): page_pool: keep pp info as long as page pool owns the page page_pool: add interface to manipulate frag count in page pool page_pool: add frag page recycling support in page pool net: hns3: support skb's frag page recycling based on page pool drivers/net/ethernet/hisilicon/Kconfig | 1 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 79 +++++++++++++++-- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 3 + drivers/net/ethernet/marvell/mvneta.c | 6 +- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 2 +- drivers/net/ethernet/ti/cpsw.c | 2 +- drivers/net/ethernet/ti/cpsw_new.c | 2 +- include/linux/mm_types.h | 18 ++-- include/linux/skbuff.h | 4 +- include/net/page_pool.h | 68 +++++++++++--- net/core/page_pool.c | 112 +++++++++++++++++++++++- 11 files changed, 258 insertions(+), 39 deletions(-) -- 2.7.4

7 25

[PATCH V3 net-next 0/4] ethtool: extend coalesce uAPI
by Yufeng Mo 15 Sep '21

15 Sep '21

In order to support some configuration in coalesce uAPI, this series extend coalesce uAPI and add support for CQE mode. Below is some test result with HNS3 driver: 1. old ethtool(ioctl) + new kernel: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 20 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 20 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 2. ethtool(netlink with cqe mode) + kernel without cqe mode: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: n/a sample-interval: n/a pkt-rate-low: n/a pkt-rate-high: n/a rx-usecs: 20 rx-frames: 0 rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 20 tx-frames: 0 tx-usecs-irq: n/a tx-frames-irq: n/a rx-usecs-low: n/a rx-frame-low: n/a tx-usecs-low: n/a tx-frame-low: n/a rx-usecs-high: 0 rx-frame-high: n/a tx-usecs-high: 0 tx-frame-high: n/a CQE mode RX: n/a TX: n/a 3. ethool(netlink with cqe mode) + kernel with cqe mode: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: n/a sample-interval: n/a pkt-rate-low: n/a pkt-rate-high: n/a rx-usecs: 20 rx-frames: 0 rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 20 tx-frames: 0 tx-usecs-irq: n/a tx-frames-irq: n/a rx-usecs-low: n/a rx-frame-low: n/a tx-usecs-low: n/a tx-frame-low: n/a rx-usecs-high: 0 rx-frame-high: n/a tx-usecs-high: 0 tx-frame-high: n/a CQE mode RX: off TX: off 4. ethool(netlink without cqe mode) + kernel with cqe mode: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: n/a sample-interval: n/a pkt-rate-low: n/a pkt-rate-high: n/a rx-usecs: 20 rx-frames: 0 rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 20 tx-frames: 0 tx-usecs-irq: n/a tx-frames-irq: n/a rx-usecs-low: n/a rx-frame-low: n/a tx-usecs-low: n/a tx-frame-low: n/a rx-usecs-high: 0 rx-frame-high: n/a tx-usecs-high: 0 tx-frame-high: n/a Change log: V2 -> V3: fix some warning on W=1 builds in #2 V1 -> V2: 1. fix compile error using allmodconfig in #2 2. move some property-related modifications from #2 to #1 for better review suggested by Jakub Kicinski. Change log from RFC: V3 -> V4: add document explaining the difference between CQE and EQE in #1 suggested by Jakub Kicinski. V2 -> V3: 1. split #1 into adding new parameter and adding new attributes. 2. use NLA_POLICY_MAX(NLA_U8, 1) instead of NLA_U8. 3. modify the description of CQE in Document. V1 -> V2: refactor #1&#2 in V1 suggestted by Jakub Kicinski. Yufeng Mo (4): ethtool: add two coalesce attributes for CQE mode ethtool: extend coalesce setting uAPI with CQE mode net: hns3: add support for EQE/CQE mode configuration net: hns3: add ethtool support for CQE/EQE mode configuration Documentation/networking/ethtool-netlink.rst | 15 +++++++ drivers/infiniband/ulp/ipoib/ipoib_ethtool.c | 8 +++- drivers/net/ethernet/amazon/ena/ena_ethtool.c | 8 +++- drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 8 +++- .../net/ethernet/aquantia/atlantic/aq_ethtool.c | 8 +++- drivers/net/ethernet/broadcom/bcmsysport.c | 8 +++- drivers/net/ethernet/broadcom/bnx2.c | 12 ++++-- .../net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 8 +++- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 8 +++- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 +++- drivers/net/ethernet/broadcom/tg3.c | 10 ++++- drivers/net/ethernet/brocade/bna/bnad_ethtool.c | 12 ++++-- drivers/net/ethernet/cavium/liquidio/lio_ethtool.c | 8 +++- .../net/ethernet/cavium/thunder/nicvf_ethtool.c | 4 +- drivers/net/ethernet/chelsio/cxgb/cxgb2.c | 8 +++- drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 8 +++- drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 8 +++- .../net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 8 +++- drivers/net/ethernet/cisco/enic/enic_ethtool.c | 8 +++- drivers/net/ethernet/cortina/gemini.c | 8 +++- drivers/net/ethernet/emulex/benet/be_ethtool.c | 8 +++- drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 8 +++- .../net/ethernet/freescale/enetc/enetc_ethtool.c | 8 +++- drivers/net/ethernet/freescale/fec_main.c | 14 ++++--- drivers/net/ethernet/freescale/gianfar_ethtool.c | 8 +++- drivers/net/ethernet/hisilicon/hip04_eth.c | 8 +++- drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 12 +++++- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 49 +++++++++++++++++++++- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 11 +++++ drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 26 ++++++++++-- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 + .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 1 + drivers/net/ethernet/huawei/hinic/hinic_ethtool.c | 8 +++- drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 8 +++- drivers/net/ethernet/intel/e1000e/ethtool.c | 8 +++- drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c | 8 +++- drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 12 +++++- drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 12 +++++- drivers/net/ethernet/intel/ice/ice_ethtool.c | 12 ++++-- drivers/net/ethernet/intel/igb/igb_ethtool.c | 8 +++- drivers/net/ethernet/intel/igbvf/ethtool.c | 8 +++- drivers/net/ethernet/intel/igc/igc_ethtool.c | 8 +++- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 8 +++- drivers/net/ethernet/intel/ixgbevf/ethtool.c | 8 +++- drivers/net/ethernet/jme.c | 12 ++++-- drivers/net/ethernet/marvell/mv643xx_eth.c | 12 ++++-- drivers/net/ethernet/marvell/mvneta.c | 14 +++++-- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 14 +++++-- .../ethernet/marvell/octeontx2/nic/otx2_ethtool.c | 8 +++- drivers/net/ethernet/marvell/skge.c | 8 +++- drivers/net/ethernet/marvell/sky2.c | 8 +++- drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 8 +++- .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 8 +++- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 8 +++- .../ethernet/mellanox/mlx5/core/ipoib/ethtool.c | 8 +++- drivers/net/ethernet/myricom/myri10ge/myri10ge.c | 12 ++++-- .../net/ethernet/netronome/nfp/nfp_net_ethtool.c | 8 +++- drivers/net/ethernet/ni/nixge.c | 14 +++++-- .../net/ethernet/pensando/ionic/ionic_ethtool.c | 8 +++- .../ethernet/qlogic/netxen/netxen_nic_ethtool.c | 8 +++- drivers/net/ethernet/qlogic/qede/qede.h | 4 +- drivers/net/ethernet/qlogic/qede/qede_ethtool.c | 8 +++- .../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 8 +++- drivers/net/ethernet/realtek/r8169_main.c | 10 ++++- drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c | 8 +++- drivers/net/ethernet/sfc/ethtool.c | 8 +++- drivers/net/ethernet/sfc/falcon/ethtool.c | 8 +++- drivers/net/ethernet/socionext/netsec.c | 10 +++-- .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 8 +++- drivers/net/ethernet/synopsys/dwc-xlgmac-ethtool.c | 14 +++++-- drivers/net/ethernet/tehuti/tehuti.c | 12 ++++-- drivers/net/ethernet/ti/cpsw.c | 2 +- drivers/net/ethernet/ti/cpsw_ethtool.c | 8 +++- drivers/net/ethernet/ti/cpsw_new.c | 2 +- drivers/net/ethernet/ti/cpsw_priv.h | 8 +++- drivers/net/ethernet/ti/davinci_emac.c | 14 +++++-- drivers/net/ethernet/via/via-velocity.c | 8 +++- drivers/net/ethernet/xilinx/ll_temac_main.c | 14 +++++-- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 18 ++++++-- drivers/net/netdevsim/ethtool.c | 8 +++- drivers/net/tun.c | 8 +++- drivers/net/usb/r8152.c | 8 +++- drivers/net/virtio_net.c | 8 +++- drivers/net/vmxnet3/vmxnet3_ethtool.c | 12 ++++-- drivers/net/wireless/ath/wil6210/ethtool.c | 14 +++++-- drivers/s390/net/qeth_ethtool.c | 4 +- drivers/staging/qlge/qlge_ethtool.c | 10 ++++- include/linux/ethtool.h | 22 ++++++++-- include/uapi/linux/ethtool_netlink.h | 2 + net/ethtool/coalesce.c | 29 ++++++++++--- net/ethtool/ioctl.c | 15 +++++-- net/ethtool/netlink.h | 2 +- 93 files changed, 699 insertions(+), 209 deletions(-) -- 2.8.1

6 11

[PATCH V2 ethtool-next] netlink: settings: add netlink support for coalesce cqe mode parameter
by Yufeng Mo 13 Sep '21

13 Sep '21

Add support for "ethtool -C <dev> cqe-mode-rx/cqe-mode-tx on/off" for setting coalesce cqe mode. Signed-off-by: Yufeng Mo <moyufeng(a)huawei.com> --- ChangeLogs: V1 -> V2: 1. update the man page for new paremeters cqe-mode-rx/cqe-mode-tx. 2. add '\n' in coalesce_reply_cb() after showing new paremeters. --- ethtool.8.in | 2 ++ ethtool.c | 2 ++ netlink/coalesce.c | 16 ++++++++++++++++ 3 files changed, 20 insertions(+) diff --git a/ethtool.8.in b/ethtool.8.in index f83d6d1..c187c32 100644 --- a/ethtool.8.in +++ b/ethtool.8.in @@ -186,6 +186,8 @@ ethtool \- query or control network driver and hardware settings .BN tx\-usecs\-high .BN tx\-frames\-high .BN sample\-interval +.B2 cqe\-mode\-rx on off +.B2 cqe\-mode\-tx on off .HP .B ethtool \-g|\-\-show\-ring .I devname diff --git a/ethtool.c b/ethtool.c index 2486caa..a6826e9 100644 --- a/ethtool.c +++ b/ethtool.c @@ -5703,6 +5703,8 @@ static const struct option args[] = { " [tx-usecs-high N]\n" " [tx-frames-high N]\n" " [sample-interval N]\n" + " [cqe-mode-rx on|off]\n" + " [cqe-mode-tx on|off]\n" }, { .opts = "-g|--show-ring", diff --git a/netlink/coalesce.c b/netlink/coalesce.c index 75922a9..15037c2 100644 --- a/netlink/coalesce.c +++ b/netlink/coalesce.c @@ -66,6 +66,10 @@ int coalesce_reply_cb(const struct nlmsghdr *nlhdr, void *data) show_u32(tb[ETHTOOL_A_COALESCE_TX_USECS_HIGH], "tx-usecs-high: "); show_u32(tb[ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH], "tx-frame-high: "); putchar('\n'); + show_bool("rx", "CQE mode RX: %s ", + tb[ETHTOOL_A_COALESCE_USE_CQE_MODE_RX]); + show_bool("tx", "TX: %s\n", tb[ETHTOOL_A_COALESCE_USE_CQE_MODE_TX]); + putchar('\n'); return MNL_CB_OK; } @@ -226,6 +230,18 @@ static const struct param_parser scoalesce_params[] = { .handler = nl_parse_direct_u32, .min_argc = 1, }, + { + .arg = "cqe-mode-rx", + .type = ETHTOOL_A_COALESCE_USE_CQE_MODE_RX, + .handler = nl_parse_u8bool, + .min_argc = 1, + }, + { + .arg = "cqe-mode-tx", + .type = ETHTOOL_A_COALESCE_USE_CQE_MODE_TX, + .handler = nl_parse_u8bool, + .min_argc = 1, + }, {} }; -- 2.8.1

3 2

[PATCH net-next 0/2] some optimization for page pool
by Yunsheng Lin 01 Sep '21

01 Sep '21

Patch 1: support non-split page when PP_FLAG_PAGE_FRAG is set. Patch 1: keep track of pp page when __skb_frag_ref() is called. Yunshene Lin (2): page_pool: support non-split page with PP_FLAG_PAGE_FRAG skbuff: keep track of pp page when __skb_frag_ref() is called include/linux/skbuff.h | 13 ++++++++++++- include/net/page_pool.h | 23 +++++++++++++++++++++++ net/core/page_pool.c | 24 +++++++++--------------- 3 files changed, 44 insertions(+), 16 deletions(-) -- 2.7.4

3 10

For your information
by Godwin Pete 30 Aug '21

30 Aug '21

Hi, I just want to use this little opportunity to inform you about my success towards the transfer. I'm currently out of the country for an investment with part of my share, after completing the transfer with an Indian business man. But i will visit your country, next year. After the completion of my project. Please, contact my secretary to send you the (ATM) card which I've already credited with the sum of ($500,000.00). Just contact her to help you in receiving the (ATM) card. I've explained everything to her before my trip. This is what I can do for you because, you couldn't help in the transfer, but for the fact that you're the person whom I've contacted initially, for the transfer. I decided to give this ($500,000.00) as a compensation for being contacted initially for the transfer. I always try to make the difference, in dealing with people any time I come in contact with them. I'm also trying to show that I'm quite a different person from others whose may have a different purpose within them. I believe that you will render some help to me when I, will visit your country, for another investment there. So contact my secretary for the card, Her contact are as follows, Full name: Mrs, Jovita Dumuije, Country: Burkina Faso Email: jovitadumuije(a)gmail.com Thanks, and hope for a good corporation with you in future. Godwin Peter,

1 0

[PATCH RESEND ethtool-next] netlink: settings: add netlink support for coalesce cqe mode parameter
by Yufeng Mo 30 Aug '21

30 Aug '21

Add support for "ethtool -c <dev> cqe-mode-rx/cqe-mode-tx on/off" for setting coalesce cqe mode. Signed-off-by: Yufeng Mo <moyufeng(a)huawei.com> --- ethtool.c | 2 ++ netlink/coalesce.c | 15 +++++++++++++++ 2 files changed, 17 insertions(+) diff --git a/ethtool.c b/ethtool.c index 2486caa..a6826e9 100644 --- a/ethtool.c +++ b/ethtool.c @@ -5703,6 +5703,8 @@ static const struct option args[] = { " [tx-usecs-high N]\n" " [tx-frames-high N]\n" " [sample-interval N]\n" + " [cqe-mode-rx on|off]\n" + " [cqe-mode-tx on|off]\n" }, { .opts = "-g|--show-ring", diff --git a/netlink/coalesce.c b/netlink/coalesce.c index 75922a9..762d0e3 100644 --- a/netlink/coalesce.c +++ b/netlink/coalesce.c @@ -66,6 +66,9 @@ int coalesce_reply_cb(const struct nlmsghdr *nlhdr, void *data) show_u32(tb[ETHTOOL_A_COALESCE_TX_USECS_HIGH], "tx-usecs-high: "); show_u32(tb[ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH], "tx-frame-high: "); putchar('\n'); + show_bool("rx", "CQE mode RX: %s ", + tb[ETHTOOL_A_COALESCE_USE_CQE_MODE_RX]); + show_bool("tx", "TX: %s\n", tb[ETHTOOL_A_COALESCE_USE_CQE_MODE_TX]); return MNL_CB_OK; } @@ -226,6 +229,18 @@ static const struct param_parser scoalesce_params[] = { .handler = nl_parse_direct_u32, .min_argc = 1, }, + { + .arg = "cqe-mode-rx", + .type = ETHTOOL_A_COALESCE_USE_CQE_MODE_RX, + .handler = nl_parse_u8bool, + .min_argc = 1, + }, + { + .arg = "cqe-mode-tx", + .type = ETHTOOL_A_COALESCE_USE_CQE_MODE_TX, + .handler = nl_parse_u8bool, + .min_argc = 1, + }, {} }; -- 2.8.1

3 2

[PATCH kernel] netlink: settings: add netlink support for coalesce cqe mode parameter
by Yufeng Mo 27 Aug '21

27 Aug '21

Add support for "ethtool -c <dev> cqe-mode-rx/cqe-mode-tx on/off" for setting coalesce cqe mode. Signed-off-by: Yufeng Mo <moyufeng(a)huawei.com> --- ethtool.c | 2 ++ netlink/coalesce.c | 15 +++++++++++++++ 2 files changed, 17 insertions(+) diff --git a/ethtool.c b/ethtool.c index 2486caa..a6826e9 100644 --- a/ethtool.c +++ b/ethtool.c @@ -5703,6 +5703,8 @@ static const struct option args[] = { " [tx-usecs-high N]\n" " [tx-frames-high N]\n" " [sample-interval N]\n" + " [cqe-mode-rx on|off]\n" + " [cqe-mode-tx on|off]\n" }, { .opts = "-g|--show-ring", diff --git a/netlink/coalesce.c b/netlink/coalesce.c index 75922a9..762d0e3 100644 --- a/netlink/coalesce.c +++ b/netlink/coalesce.c @@ -66,6 +66,9 @@ int coalesce_reply_cb(const struct nlmsghdr *nlhdr, void *data) show_u32(tb[ETHTOOL_A_COALESCE_TX_USECS_HIGH], "tx-usecs-high: "); show_u32(tb[ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH], "tx-frame-high: "); putchar('\n'); + show_bool("rx", "CQE mode RX: %s ", + tb[ETHTOOL_A_COALESCE_USE_CQE_MODE_RX]); + show_bool("tx", "TX: %s\n", tb[ETHTOOL_A_COALESCE_USE_CQE_MODE_TX]); return MNL_CB_OK; } @@ -226,6 +229,18 @@ static const struct param_parser scoalesce_params[] = { .handler = nl_parse_direct_u32, .min_argc = 1, }, + { + .arg = "cqe-mode-rx", + .type = ETHTOOL_A_COALESCE_USE_CQE_MODE_RX, + .handler = nl_parse_u8bool, + .min_argc = 1, + }, + { + .arg = "cqe-mode-tx", + .type = ETHTOOL_A_COALESCE_USE_CQE_MODE_TX, + .handler = nl_parse_u8bool, + .min_argc = 1, + }, {} }; -- 2.8.1

2 1

[PATCH kernel] netlink: settings: add netlink support for coalesce cqe mode parameter
by Yufeng Mo 27 Aug '21

27 Aug '21

Add support for "ethtool -c <dev> cqe-mode-rx/cqe-mode-tx on/off" for setting coalesce cqe mode. Signed-off-by: Yufeng Mo <moyufeng(a)huawei.com> --- ethtool.c | 2 ++ netlink/coalesce.c | 15 +++++++++++++++ 2 files changed, 17 insertions(+) diff --git a/ethtool.c b/ethtool.c index 2486caa..a6826e9 100644 --- a/ethtool.c +++ b/ethtool.c @@ -5703,6 +5703,8 @@ static const struct option args[] = { " [tx-usecs-high N]\n" " [tx-frames-high N]\n" " [sample-interval N]\n" + " [cqe-mode-rx on|off]\n" + " [cqe-mode-tx on|off]\n" }, { .opts = "-g|--show-ring", diff --git a/netlink/coalesce.c b/netlink/coalesce.c index 75922a9..762d0e3 100644 --- a/netlink/coalesce.c +++ b/netlink/coalesce.c @@ -66,6 +66,9 @@ int coalesce_reply_cb(const struct nlmsghdr *nlhdr, void *data) show_u32(tb[ETHTOOL_A_COALESCE_TX_USECS_HIGH], "tx-usecs-high: "); show_u32(tb[ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH], "tx-frame-high: "); putchar('\n'); + show_bool("rx", "CQE mode RX: %s ", + tb[ETHTOOL_A_COALESCE_USE_CQE_MODE_RX]); + show_bool("tx", "TX: %s\n", tb[ETHTOOL_A_COALESCE_USE_CQE_MODE_TX]); return MNL_CB_OK; } @@ -226,6 +229,18 @@ static const struct param_parser scoalesce_params[] = { .handler = nl_parse_direct_u32, .min_argc = 1, }, + { + .arg = "cqe-mode-rx", + .type = ETHTOOL_A_COALESCE_USE_CQE_MODE_RX, + .handler = nl_parse_u8bool, + .min_argc = 1, + }, + { + .arg = "cqe-mode-tx", + .type = ETHTOOL_A_COALESCE_USE_CQE_MODE_TX, + .handler = nl_parse_u8bool, + .min_argc = 1, + }, {} }; -- 2.8.1

1 0

[PATCH net-next] sock: remove one redundant SKB_FRAG_PAGE_ORDER macro
by Yunsheng Lin 26 Aug '21

26 Aug '21

Both SKB_FRAG_PAGE_ORDER are defined to the same value in net/core/sock.c and drivers/vhost/net.c. Move the SKB_FRAG_PAGE_ORDER definition to net/core/sock.h, as both net/core/sock.c and drivers/vhost/net.c include it, and it seems a reasonable file to put the macro. Signed-off-by: Yunsheng Lin <linyunsheng(a)huawei.com> --- drivers/vhost/net.c | 2 -- include/net/sock.h | 1 + net/core/sock.c | 1 - 3 files changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 6414bd5..3a249ee 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -643,8 +643,6 @@ static bool tx_can_batch(struct vhost_virtqueue *vq, size_t total_len) !vhost_vq_avail_empty(vq->dev, vq); } -#define SKB_FRAG_PAGE_ORDER get_order(32768) - static bool vhost_net_page_frag_refill(struct vhost_net *net, unsigned int sz, struct page_frag *pfrag, gfp_t gfp) { diff --git a/include/net/sock.h b/include/net/sock.h index 95b2577..66a9a90 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -2717,6 +2717,7 @@ extern int sysctl_optmem_max; extern __u32 sysctl_wmem_default; extern __u32 sysctl_rmem_default; +#define SKB_FRAG_PAGE_ORDER get_order(32768) DECLARE_STATIC_KEY_FALSE(net_high_order_alloc_disable_key); static inline int sk_get_wmem0(const struct sock *sk, const struct proto *proto) diff --git a/net/core/sock.c b/net/core/sock.c index 950f1e7..62627e8 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -2574,7 +2574,6 @@ static void sk_leave_memory_pressure(struct sock *sk) } } -#define SKB_FRAG_PAGE_ORDER get_order(32768) DEFINE_STATIC_KEY_FALSE(net_high_order_alloc_disable_key); /** -- 2.7.4

3 2

[PATCH RFC 0/7] add socket to netdev page frag recycling support
by Yunsheng Lin 26 Aug '21

26 Aug '21

This patchset adds the socket to netdev page frag recycling support based on the busy polling and page pool infrastructure. The profermance improve from 30Gbit to 41Gbit for one thread iperf tcp flow, and the CPU usages decreases about 20% for four threads iperf flow with 100Gb line speed in IOMMU strict mode. The profermance improve about 2.5% for one thread iperf tcp flow in IOMMU passthrough mode. Yunsheng Lin (7): page_pool: refactor the page pool to support multi alloc context skbuff: add interface to manipulate frag count for tx recycling net: add NAPI api to register and retrieve the page pool ptr net: pfrag_pool: add pfrag pool support based on page pool sock: support refilling pfrag from pfrag_pool net: hns3: support tx recycling in the hns3 driver sysctl_tcp_use_pfrag_pool drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 32 +++++---- include/linux/netdevice.h | 9 +++ include/linux/skbuff.h | 43 +++++++++++- include/net/netns/ipv4.h | 1 + include/net/page_pool.h | 15 ++++ include/net/pfrag_pool.h | 24 +++++++ include/net/sock.h | 1 + net/core/Makefile | 1 + net/core/dev.c | 34 ++++++++- net/core/page_pool.c | 86 ++++++++++++----------- net/core/pfrag_pool.c | 92 +++++++++++++++++++++++++ net/core/sock.c | 12 ++++ net/ipv4/sysctl_net_ipv4.c | 7 ++ net/ipv4/tcp.c | 34 ++++++--- 14 files changed, 325 insertions(+), 66 deletions(-) create mode 100644 include/net/pfrag_pool.h create mode 100644 net/core/pfrag_pool.c -- 2.7.4

3 22

2024

2023

2022

2021

2020

Linuxarm August 2021