- Linuxarm - mailweb.openeuler.org

[PATCH net-next] skbuff: remove some unnecessary operation in skb_segment_list()
by l00371289 11 Mar '21

11 Mar '21

From: Yunsheng Lin <linyunsheng(a)huawei.com> gro list uses skb_shinfo(skb)->frag_list to link two skb together, and NAPI_GRO_CB(p)->last->next is used when there are more skb, see skb_gro_receive_list(). gso expects that each segmented skb is linked together using skb->next, so only the first skb->next need to set to skb_shinfo(skb)-> frag_list when doing gso list segment. It is the same reason that nskb->next does not need to be set to list_skb before goto the error handling, because nskb->next already pointers to list_skb. And nskb is also the last skb at the end of loop, so remove tail variable and use nskb instead. Signed-off-by: Yunsheng Lin <linyunsheng(a)huawei.com> --- net/core/skbuff.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index c421c8f..e8320b5 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -3732,13 +3732,13 @@ struct sk_buff *skb_segment_list(struct sk_buff *skb, unsigned int tnl_hlen = skb_tnl_header_len(skb); unsigned int delta_truesize = 0; unsigned int delta_len = 0; - struct sk_buff *tail = NULL; struct sk_buff *nskb, *tmp; int err; skb_push(skb, -skb_network_offset(skb) + offset); skb_shinfo(skb)->frag_list = NULL; + skb->next = list_skb; do { nskb = list_skb; @@ -3756,17 +3756,8 @@ struct sk_buff *skb_segment_list(struct sk_buff *skb, } } - if (!tail) - skb->next = nskb; - else - tail->next = nskb; - - if (unlikely(err)) { - nskb->next = list_skb; + if (unlikely(err)) goto err_linearize; - } - - tail = nskb; delta_len += nskb->len; delta_truesize += nskb->truesize; @@ -3793,7 +3784,7 @@ struct sk_buff *skb_segment_list(struct sk_buff *skb, skb_gso_reset(skb); - skb->prev = tail; + skb->prev = nskb; if (skb_needs_linearize(skb, features) && __skb_linearize(skb)) -- 2.7.4

2 1

[PATCH for-next] RDMA/hns: Use new SQ doorbell register for HIP09
by Weihang Li 11 Mar '21

11 Mar '21

From: Lang Cheng <chenglang(a)huawei.com> HIP09 uses new address space to map SQ doorbell registers, the doorbell of each QP is isolated based on the size of 64KB, which can improve the performance in concurrency scenarios. Signed-off-by: Lang Cheng <chenglang(a)huawei.com> Signed-off-by: Weihang Li <liweihang(a)huawei.com> --- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 3 +- drivers/infiniband/hw/hns/hns_roce_qp.c | 49 ++++++++++++++++-------------- 2 files changed, 28 insertions(+), 24 deletions(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index c3934ab..18394e5 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -681,8 +681,7 @@ static void write_dwqe(struct hns_roce_dev *hr_dev, struct hns_roce_qp *qp, roce_set_field(rc_sq_wqe->byte_4, V2_RC_SEND_WQE_BYTE_4_WQE_INDEX_M, V2_RC_SEND_WQE_BYTE_4_WQE_INDEX_S, qp->sq.head); - hns_roce_write512(hr_dev, wqe, hr_dev->mem_base + - HNS_ROCE_DWQE_SIZE * qp->ibqp.qp_num); + hns_roce_write512(hr_dev, wqe, qp->sq.db_reg_l); } static int hns_roce_v2_post_send(struct ib_qp *ibqp, diff --git a/drivers/infiniband/hw/hns/hns_roce_qp.c b/drivers/infiniband/hw/hns/hns_roce_qp.c index 8af411f..2318e3e 100644 --- a/drivers/infiniband/hw/hns/hns_roce_qp.c +++ b/drivers/infiniband/hw/hns/hns_roce_qp.c @@ -840,9 +840,14 @@ static int alloc_qp_db(struct hns_roce_dev *hr_dev, struct hns_roce_qp *hr_qp, resp->cap_flags |= HNS_ROCE_QP_CAP_RQ_RECORD_DB; } } else { - /* QP doorbell register address */ - hr_qp->sq.db_reg_l = hr_dev->reg_base + hr_dev->sdb_offset + - DB_REG_OFFSET * hr_dev->priv_uar.index; + if (hr_dev->pci_dev->revision >= PCI_REVISION_ID_HIP09) + hr_qp->sq.db_reg_l = hr_dev->mem_base + + HNS_ROCE_DWQE_SIZE * hr_qp->qpn; + else + hr_qp->sq.db_reg_l = + hr_dev->reg_base + hr_dev->sdb_offset + + DB_REG_OFFSET * hr_dev->priv_uar.index; + hr_qp->rq.db_reg_l = hr_dev->reg_base + hr_dev->odb_offset + DB_REG_OFFSET * hr_dev->priv_uar.index; @@ -1011,36 +1016,36 @@ static int hns_roce_create_qp_common(struct hns_roce_dev *hr_dev, } } - ret = alloc_qp_db(hr_dev, hr_qp, init_attr, udata, &ucmd, &resp); - if (ret) { - ibdev_err(ibdev, "failed to alloc QP doorbell, ret = %d.\n", - ret); - goto err_wrid; - } - ret = alloc_qp_buf(hr_dev, hr_qp, init_attr, udata, ucmd.buf_addr); if (ret) { ibdev_err(ibdev, "failed to alloc QP buffer, ret = %d.\n", ret); - goto err_db; + goto err_buf; } ret = alloc_qpn(hr_dev, hr_qp); if (ret) { ibdev_err(ibdev, "failed to alloc QPN, ret = %d.\n", ret); - goto err_buf; + goto err_qpn; + } + + ret = alloc_qp_db(hr_dev, hr_qp, init_attr, udata, &ucmd, &resp); + if (ret) { + ibdev_err(ibdev, "failed to alloc QP doorbell, ret = %d.\n", + ret); + goto err_db; } ret = alloc_qpc(hr_dev, hr_qp); if (ret) { ibdev_err(ibdev, "failed to alloc QP context, ret = %d.\n", ret); - goto err_qpn; + goto err_qpc; } ret = hns_roce_qp_store(hr_dev, hr_qp, init_attr); if (ret) { ibdev_err(ibdev, "failed to store QP, ret = %d.\n", ret); - goto err_qpc; + goto err_store; } if (udata) { @@ -1055,7 +1060,7 @@ static int hns_roce_create_qp_common(struct hns_roce_dev *hr_dev, if (hr_dev->caps.flags & HNS_ROCE_CAP_FLAG_QP_FLOW_CTRL) { ret = hr_dev->hw->qp_flow_control_init(hr_dev, hr_qp); if (ret) - goto err_store; + goto err_flow_ctrl; } hr_qp->ibqp.qp_num = hr_qp->qpn; @@ -1065,17 +1070,17 @@ static int hns_roce_create_qp_common(struct hns_roce_dev *hr_dev, return 0; -err_store: +err_flow_ctrl: hns_roce_qp_remove(hr_dev, hr_qp); -err_qpc: +err_store: free_qpc(hr_dev, hr_qp); -err_qpn: +err_qpc: + free_qp_db(hr_dev, hr_qp, udata); +err_db: free_qpn(hr_dev, hr_qp); -err_buf: +err_qpn: free_qp_buf(hr_dev, hr_qp); -err_db: - free_qp_db(hr_dev, hr_qp, udata); -err_wrid: +err_buf: free_kernel_wrid(hr_qp); return ret; } -- 2.8.1

2 1

Re: [RESEND PATCH] PCI: Factor functions of PCI function reset
by Yicong Yang 10 Mar '21

10 Mar '21

On 2021/3/9 23:50, Bjorn Helgaas wrote: > [+cc Alex, Krzysztof] > > On Wed, Nov 11, 2020 at 06:22:03PM +0800, Yicong Yang wrote: >> Previosly we use pci_probe_reset_function() to probe whehter a function >> can be reset and use __pci_reset_function_locked() to perform a function >> reset. These two functions have lots of common lines. > > s/Previosly/Previously/ > s/we use/we used/ > s/whehter/whether/ will fix. > > I'm not a big fan of dual-purpose functions that decide whether to > probe or to reset based on a parameter. Those two things just don't > seem semantically compatible. But I do see your point about common > lines, and the underlying functions (pci_dev_specific_reset(), > pci_af_flr(), etc) already have that structure. > i noticed this when i tried to fix another issue with FLR[1]. as you said, the underlying functions use the probe flag to indicate whether it is a probe operation or not and i think it make sense to reduce the redundency in the same way. > Let me think about this some more. > sure, of course. It's also very kind to have any comments on the previous issue we met: [1] https://lore.kernel.org/linux-pci/1605090088-13960-1-git-send-email-yangyic… Thanks, Yicong >> Factor the two functions and reduce the redundancy. >> >> Signed-off-by: Yicong Yang <yangyicong(a)hisilicon.com> >> --- >> drivers/pci/pci.c | 61 ++++++++++++++++------------------------------------- >> drivers/pci/pci.h | 2 +- >> drivers/pci/probe.c | 2 +- >> 3 files changed, 20 insertions(+), 45 deletions(-) >> >> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c >> index e39c549..e3e5f0f 100644 >> --- a/drivers/pci/pci.c >> +++ b/drivers/pci/pci.c >> @@ -5006,9 +5006,11 @@ static void pci_dev_restore(struct pci_dev *dev) >> } >> >> /** >> - * __pci_reset_function_locked - reset a PCI device function while holding >> - * the @dev mutex lock. >> + * pci_probe_reset_function - check whether the device can be safely reset >> + * or reset a PCI device function while holding >> + * the @dev mutex lock. >> * @dev: PCI device to reset >> + * @probe: Probe or not whether the device can be reset. >> * >> * Some devices allow an individual function to be reset without affecting >> * other functions in the same device. The PCI device must be responsive >> @@ -5022,10 +5024,10 @@ static void pci_dev_restore(struct pci_dev *dev) >> * device including MSI, bus mastering, BARs, decoding IO and memory spaces, >> * etc. >> * >> - * Returns 0 if the device function was successfully reset or negative if the >> - * device doesn't support resetting a single function. >> + * Returns 0 if the device function can be reset or was successfully reset. >> + * negative if the device doesn't support resetting a single function. >> */ >> -int __pci_reset_function_locked(struct pci_dev *dev) >> +int pci_probe_reset_function(struct pci_dev *dev, int probe) >> { >> int rc; >> >> @@ -5039,61 +5041,34 @@ int __pci_reset_function_locked(struct pci_dev *dev) >> * other error, we're also finished: this indicates that further >> * reset mechanisms might be broken on the device. >> */ >> - rc = pci_dev_specific_reset(dev, 0); >> + rc = pci_dev_specific_reset(dev, probe); >> if (rc != -ENOTTY) >> return rc; >> if (pcie_has_flr(dev)) { >> + if (probe) >> + return 0; >> rc = pcie_flr(dev); >> if (rc != -ENOTTY) >> return rc; >> } >> - rc = pci_af_flr(dev, 0); >> + rc = pci_af_flr(dev, probe); >> if (rc != -ENOTTY) >> return rc; >> - rc = pci_pm_reset(dev, 0); >> + rc = pci_pm_reset(dev, probe); >> if (rc != -ENOTTY) >> return rc; >> - rc = pci_dev_reset_slot_function(dev, 0); >> + rc = pci_dev_reset_slot_function(dev, probe); >> if (rc != -ENOTTY) >> return rc; >> - return pci_parent_bus_reset(dev, 0); >> + >> + return pci_parent_bus_reset(dev, probe); >> } >> -EXPORT_SYMBOL_GPL(__pci_reset_function_locked); >> >> -/** >> - * pci_probe_reset_function - check whether the device can be safely reset >> - * @dev: PCI device to reset >> - * >> - * Some devices allow an individual function to be reset without affecting >> - * other functions in the same device. The PCI device must be responsive >> - * to PCI config space in order to use this function. >> - * >> - * Returns 0 if the device function can be reset or negative if the >> - * device doesn't support resetting a single function. >> - */ >> -int pci_probe_reset_function(struct pci_dev *dev) >> +int __pci_reset_function_locked(struct pci_dev *dev) >> { >> - int rc; >> - >> - might_sleep(); >> - >> - rc = pci_dev_specific_reset(dev, 1); >> - if (rc != -ENOTTY) >> - return rc; >> - if (pcie_has_flr(dev)) >> - return 0; >> - rc = pci_af_flr(dev, 1); >> - if (rc != -ENOTTY) >> - return rc; >> - rc = pci_pm_reset(dev, 1); >> - if (rc != -ENOTTY) >> - return rc; >> - rc = pci_dev_reset_slot_function(dev, 1); >> - if (rc != -ENOTTY) >> - return rc; >> - >> - return pci_parent_bus_reset(dev, 1); >> + return pci_probe_reset_function(dev, 0); >> } >> +EXPORT_SYMBOL_GPL(__pci_reset_function_locked); >> >> /** >> * pci_reset_function - quiesce and reset a PCI device function >> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h >> index fa12f7c..73740dd 100644 >> --- a/drivers/pci/pci.h >> +++ b/drivers/pci/pci.h >> @@ -39,7 +39,7 @@ enum pci_mmap_api { >> int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vmai, >> enum pci_mmap_api mmap_api); >> >> -int pci_probe_reset_function(struct pci_dev *dev); >> +int pci_probe_reset_function(struct pci_dev *dev, int probe); >> int pci_bridge_secondary_bus_reset(struct pci_dev *dev); >> int pci_bus_error_reset(struct pci_dev *dev); >> >> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c >> index 03d3712..793cc8a 100644 >> --- a/drivers/pci/probe.c >> +++ b/drivers/pci/probe.c >> @@ -2403,7 +2403,7 @@ static void pci_init_capabilities(struct pci_dev *dev) >> >> pcie_report_downtraining(dev); >> >> - if (pci_probe_reset_function(dev) == 0) >> + if (pci_probe_reset_function(dev, 1) == 0) >> dev->reset_fn = 1; >> } >> >> -- >> 2.8.1 >> > > . >

1 0

hi there
by J. Kirinec 09 Mar '21

09 Mar '21

Hello there, How are you today? fine i hope. It's nice to meet you, and I hope you do not mind me being connected with you in such a way. in actual fact i was looking for my old friend who reside in your country and that was when I came across your profile and I decided to write you. My name is J. Kirinec, USA marine officer. I am in charge of medic. I will like to hear from you if it so please with you, i believe it's curiosity that brings me to you in a time like this. It will be my wish to establish a very strong relationship with you because I felt the both of us want the same thing. Once again I must say that I am sorry if the connection with you contradicts your moral ethics. I look forward to hearing from you. Regards, J. Kirinec

1 0

[PATCH] sched/topology: Fix a typo in pr_err()
by Yicong Yang 08 Mar '21

08 Mar '21

Fix a typo 'borken' to 'broken' in pr_err(). Signed-off-by: Yicong Yang <yangyicong(a)hisilicon.com> --- kernel/sched/topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c index 09d3504..c42e388 100644 --- a/kernel/sched/topology.c +++ b/kernel/sched/topology.c @@ -1906,7 +1906,7 @@ static struct sched_domain *build_sched_domain(struct sched_domain_topology_leve if (!cpumask_subset(sched_domain_span(child), sched_domain_span(sd))) { - pr_err("BUG: arch topology borken\n"); + pr_err("BUG: arch topology broken\n"); #ifdef CONFIG_SCHED_DEBUG pr_err(" the %s domain not a subset of the %s domain\n", child->name, sd->name); -- 2.8.1

2 2

【Some Questions About Multi-Process Resource Cleaning】
by oulijun 08 Mar '21

08 Mar '21

Hi, Thomas Monjalon&Ferruh Yigit and others I'm analyzing multiprocess with eal. I have some questions I'd like to ask you. Firstly, After the rte_eal_init() command is executed, the master and slave processes are started successfully. and traffic is continuously sent using the tester.If you run the kill -9 command to stop the slave process, restart the re-process, and start packet receiving and sending, how to ensure that the eal resource of the slave process is cleaned up? Second, how to invoke the remove function to clear probe resources of the slave process after the slave process exits? Finally, I found out why the rte_eal_cleanup call was not unregistered mp action after the process exited. I look forward to your response. Thanks Lijun Ou

4 6

[PATCH v1] drm/nouveau/device: use snprintf() to replace strncpy() to avoid NUL-terminated string loss
by Luo Jiaxing 08 Mar '21

08 Mar '21

Following warning is found when using W=1 to build kernel: In function ‘nvkm_udevice_info’, inlined from ‘nvkm_udevice_mthd’ at drivers/gpu/drm/nouveau/nvkm/engine/device/user.c:195:10: drivers/gpu/drm/nouveau/nvkm/engine/device/user.c:164:2: warning: ‘strncpy’ specified bound 16 equals destination size [-Wstringop-truncation] 164 | strncpy(args->v0.chip, device->chip->name, sizeof(args->v0.chip)); drivers/gpu/drm/nouveau/nvkm/engine/device/user.c:165:2: warning: ‘strncpy’ specified bound 64 equals destination size [-Wstringop-truncation] 165 | strncpy(args->v0.name, device->name, sizeof(args->v0.name)); The reason of this warning is strncpy() does not guarantee that the destination buffer will be NUL terminated. If the length of source string is bigger than number we set by third input parameter, only a part of characters is copied to the destination, and no NUL-terminated string is automatically added. There are some potential risks. So use snprintf() to replace strncpy(). Signed-off-by: Luo Jiaxing <luojiaxing(a)huawei.com> --- drivers/gpu/drm/nouveau/nvkm/engine/device/user.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/device/user.c b/drivers/gpu/drm/nouveau/nvkm/engine/device/user.c index fea9d8f..4bf65bb 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/device/user.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/device/user.c @@ -161,8 +161,8 @@ nvkm_udevice_info(struct nvkm_udevice *udev, void *data, u32 size) if (imem && args->v0.ram_size > 0) args->v0.ram_user = args->v0.ram_user - imem->reserved; - strncpy(args->v0.chip, device->chip->name, sizeof(args->v0.chip)); - strncpy(args->v0.name, device->name, sizeof(args->v0.name)); + snprintf(args->v0.chip, sizeof(args->v0.chip), "%s", device->chip->name); + snprintf(args->v0.name, sizeof(args->v0.name), "%s", device->name); return 0; } -- 2.7.4

1 0

[PATCH] sched/topology: remove redundant cpumask_and in init_overlap_sched_group
by Barry Song 08 Mar '21

08 Mar '21

mask is built in build_balance_mask() by for_each_cpu(i, sg_span), so it must be a subset of sched_group_span(sg). Though cpumask_first_and doesn't lead to a wrong result of balance cpu, it is pointless to do cpumask_and again. Signed-off-by: Barry Song <song.bao.hua(a)hisilicon.com> --- kernel/sched/topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c index 12f8058..45f3db2 100644 --- a/kernel/sched/topology.c +++ b/kernel/sched/topology.c @@ -934,7 +934,7 @@ static void init_overlap_sched_group(struct sched_domain *sd, int cpu; build_balance_mask(sd, sg, mask); - cpu = cpumask_first_and(sched_group_span(sg), mask); + cpu = cpumask_first(mask); sg->sgc = *per_cpu_ptr(sdd->sgc, cpu); if (atomic_inc_return(&sg->sgc->ref) == 1) -- 1.8.3.1

3 3

[PATCH 0/3] Add support for HiSilicon I2C controller
by Yicong Yang 08 Mar '21

08 Mar '21

Add driver and MAINTAINERS for HiSilicon I2C controller on Kunpeng SoC. Also provide the devm_*() variants for adding the I2C adapters. Yicong Yang (3): i2c: core: add managed function for adding i2c adapters i2c: add support for HiSilicon I2C controller MAINTAINERS: Add maintainer for HiSilicon I2C driver MAINTAINERS | 7 + drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-hisi.c | 525 ++++++++++++++++++++++++++++++++++++++++++ drivers/i2c/i2c-core-base.c | 39 ++++ include/linux/i2c.h | 1 + 6 files changed, 583 insertions(+) create mode 100644 drivers/i2c/busses/i2c-hisi.c -- 2.8.1

2 4

[bug report] irqbalance change the affinity of irq
by tiantao (H) 06 Mar '21

06 Mar '21

Hi All： I found a strange phenomenon about smmu interrupting affinity. The background is as follows. First. I have a kunpeng920 with two cpu's, four numa nodes, each numa has 32core, and each cpu has two smmu devices, which are located in numa 0 and numa 2 separately. Secondly. I know the irq number of smmu evtq by the following patch, here if this irq number is 26 diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c index 8594b4a..ce894bc 100644 --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c @@ -2945,6 +2945,7 @@ static void arm_smmu_setup_msis(struct arm_smmu_device *smmu) switch (desc->platform.msi_index) { case EVTQ_MSI_INDEX: smmu->evtq.q.irq = desc->irq; + dev_err(smmu->dev, "evtq irq number %d\n", desc->irq); The strange phenomenon is as follows. After the system boots normally, the system load is very low at this time and I can know that the irq number is on numa 1 with the following command localhost:~ # cat /proc/irq/26/smp_affinity_list 32-63 But this is wrong, the irq should be set to numa 0 for the correct affinity. When I disable irqbalance.service via command "systemctl disable irqbalance.service" and then reboot the system. After checking in the log again that the irq number of smmu evtq is still 26, then I can get the correct result by querying with the following command. localhost:~ # cat /proc/irq/26/smp_affinity_list 0-31 Why does irqbalance cause the affinity of smmu's evtq interrupt to be set to a numa node that the smmu device is not on?

3 2

2024

2023

2022

2021

2020

Linuxarm