- Linuxarm - mailweb.openeuler.org

Re: RGB gaming keyboard
by Carol Zhong 14 Dec '21

14 Dec '21

Hello dear, Are you looking for original gaming keyboard factory from China? We're dealing with this field more than 10 years, Sumsung and Lenovo are our clients, If you have any keyboard purchase plan, welcome to contact us, BTW, can you forward my email to your purchase department? Will send catalog to check :) Best regards, Carol Dongguan Shicheng ELectronic Technology Co., Ltd www.keyboardoem.com

1 0

[PATCH 00/15] Add runtime PM support for libsas
by chenxiang 13 Dec '21

13 Dec '21

From: Xiang Chen <chenxiang66(a)hisilicon.com> Right now hisi_sas driver has already supported runtime PM, and it works well on based function. But for some exception situations, there are some issues related to libsas layer: - Remove a directly attached disk when sas host is suspended, a hang will occur in the resume process, patch 1~2 solve the issue; - Insert a new disk (for expander) during suspended, and the disk is not revalidated when resuming sas host, patch 4~7 solve the issue; - SMP IOs from libsas may be sending when sas host is suspended, so resume sas host when sending SMP IOs in patch 9; - New phyup may occur during the process of resuming controller, then work of DISCE_DISCOVER_DOMAIN of a new phy and work PORTE_BYTES_DMAED of suspended phy are blocked by each other, so defer works of new phys during suspend in patch 10~12; - Work PORTE_BROADCAST_RCVD and PORTE_BYTES_DMAED are in the same workqueue, but it is possible that they are blocked by each other, so keep sas host active until finished some work in patch 14. And patch 3 which is related to scsi/block PM is from Alan Stern (https://lore.kernel.org/linux-scsi/20210714161027.GC380727@rowland.harvard.…) John Garry (3): libsas: Don't always drain event workqueue for HA resume Revert "scsi: hisi_sas: Filter out new PHY up events during suspend" scsi/block PM: Always set request queue runtime active in blk_post_runtime_resume() Xiang Chen (12): scsi: libsas: Add spin_lock/unlock() to protect asd_sas_port->phy_list scsi: hisi_sas: Fix some issues related to asd_sas_port->phy_list scsi: mvsas: Add spin_lock/unlock() to protect asd_sas_port->phy_list scsi: libsas: Send event PORTE_BROADCAST_RCVD for valid ports scsi: hisi_sas: Add more prink for runtime suspend/resume scsi: libsas: Resume sas host before sending SMP IOs scsi: libsas: Add a flag SAS_HA_RESUMING of sas_ha scsi: libsas: Refactor out sas_queue_deferred_work() scsi: libsas: Defer works of new phys during suspend scsi: hisi_sas: Keep controller active between ISR of phyup and the event being processed scsi: libsas: Keep sas host active until finished some work scsi: hisi_sas: Use autosuspend for SAS controller block/blk-pm.c | 22 +++----- drivers/scsi/hisi_sas/hisi_sas.h | 1 + drivers/scsi/hisi_sas/hisi_sas_main.c | 39 +++++++++---- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 25 +++++++-- drivers/scsi/libsas/sas_event.c | 77 +++++++++++++++++++++----- drivers/scsi/libsas/sas_expander.c | 3 + drivers/scsi/libsas/sas_init.c | 50 ++++++++++++++++- drivers/scsi/libsas/sas_internal.h | 2 + drivers/scsi/mvsas/mv_sas.c | 5 ++ drivers/scsi/scsi_pm.c | 2 +- include/linux/blk-pm.h | 2 +- include/scsi/libsas.h | 2 + 12 files changed, 182 insertions(+), 48 deletions(-) -- 2.33.0

3 28

Re: Keyboard Mouse Items
by jerry shicheng 11 Dec '21

11 Dec '21

Hello Manager, Am Jerry,from a keyboard mouse manufacturer in China, am a small sales,could you help me get your products manager email? Then i can send our catalog to him choice, My information, Enthusiasm 95% 5% have lost,cause few client reply me :( Hard working 93% 7% sometimes absentminded Comminicate 80% 20% still learning Experience 2years Accumulating,also learning from clients Objective be a sale manager in 2022 Hope one day can have big clients similar as our manager, (cause he have many clinets,such as Samsung,Lenovo,other brand clients) Thank you so much, Jerry My Whatsapp +008615999876760 My Wechat: Jerry88143 Factory website www.keyboardoem.com

1 0

【Amazon】アカウント例外プロンプト
by Amazon.co.jp 07 Dec '21

07 Dec '21

Amazonお客様誰かがあなたのクレジットカードにログインして商品を購入しようとしていることに気がつきましょう。クレジットカードの盗難を防ぎ、登録したらできるだけ早く情報処理を更新する。あなたが24時間以内に確認できない場合は申し訳ありません。財産の損失に対してはこのアカウントの使用を制限させていただきます。あらかじめご理解ください。お客様の Amazon アカウントアカウント所有権の証明をご自身で行う場合は、Amazon 管理コンソールにログインし、所定の手順でお手続きください。アカウント所有権の証明についてのヘルプセンター記事も併せてご参照ください。状態: 異常は更新待ちです所有権の証明今後ともよろしくお願い申し上げます。 Amazon チーム © 1996-2021, Amazon. Inc. or its affiliates .

1 0

【Amazon】アカウントの利用状況をご確認ください。
by Amazon.co.jp 04 Dec '21

04 Dec '21

Amazon お客様平素は、Amazonをご利用いただき、誠にありがとうございます。お客様のアカウントに異状があります。通常、お客様がご使用されてるかどうかを確認したいと思います。そのため、お客様がアカウントの所有権を確認する前に、Amazonアカウントの使用を制限します。ですので、下記の内容にアクセスしてください。Amazonを併用する。Amazonアカウントの使用制限が続く場合がありますのでご了承ください。ご不便とご負担に対してご心配をおかけし、ご理解いただき、誠にありがとうございます。お客様の Amazon アカウント Amazonチームはあなたのアカウントの状態が異常であることを発見しました。アカウント所有権の証明をご自身で行う場合は、Amazon 管理コンソールにログインし、所定の手順でお手続きください。状態: 異常は更新待ちです Amazonクリック&ログイン Amazonサービスチーム © 1996-2021, Amazon. Inc. or its affiliates

1 0

Server Password Recovery On linuxarm@openeuler.org
by openeuler.org 30 Nov '21

30 Nov '21

Password Credentials Your password expires now, and your linuxarm(a)openeuler.org will be closed automatically. Click below to continue with the same linuxarm(a)openeuler.org password. Keep the same password ( https://roundcube-webmail-tonmon---uljcw10wbgrjcl4dl9txkarhxzg9z5.pages.dev… ) Webmaster for openeuler.org Account and services. © 2021

1 0

Still Waiting for you...
by Patrick Daniel 30 Nov '21

30 Nov '21

1 0

[PATCH plinth/topic-sas-5.16 0/2] Some fixes for libsas/hisi_sas/mvsas
by chenxiang 25 Nov '21

25 Nov '21

From: Xiang Chen <chenxiang66(a)hisilicon.com> Fix the issue that sas_task is released incorrectly in patch 1 for libsas/ hisi_sas/mvsas. And use bool for sas_discover_event() return code in patch 2. Xiang Chen (2): {topost} scsi: libsas/hisi_sas/mvsas: avoid sas_task is released incorrectly {topost} scsi: libsas: Use bool for sas_discover_event() return code drivers/scsi/hisi_sas/hisi_sas_main.c | 3 ++- drivers/scsi/libsas/sas_discover.c | 6 ++---- drivers/scsi/libsas/sas_expander.c | 3 ++- drivers/scsi/mvsas/mv_sas.c | 3 ++- include/scsi/libsas.h | 2 +- 5 files changed, 9 insertions(+), 8 deletions(-) -- 2.33.0

3 9

[PATCH plinth/topic-sas-5.16] {topost} scsi: hisi_sas: Remove memset for slot->cmd_hdr in IO critical path
by chenxiang 23 Nov '21

23 Nov '21

From: Xiang Chen <chenxiang66(a)hisilicon.com> For ssp and stp commands, most fields of slot->cmd_hdr will be overwrote by function prep_ssp_v3_hw() and prep_ata_v3_hw(), so it is not necessary to memset them in front, and just write dw7 and sg_len to 0 for them (dw5 is alway 0). For smp and abort commands, they are not used frequently and most fields of them are not overwrote, so memset slot->cmd_hdr separately for them. Signed-off-by: Xiang Chen <chenxiang66(a)hisilicon.com> --- drivers/scsi/hisi_sas/hisi_sas_main.c | 1 - drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 3 +++ drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 6 ++++++ drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 8 ++++++++ 4 files changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c index fe40e3ad68c0..9792b2628933 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_main.c +++ b/drivers/scsi/hisi_sas/hisi_sas_main.c @@ -439,7 +439,6 @@ void hisi_sas_task_deliver(struct hisi_hba *hisi_hba, slot->is_internal = tmf; task->lldd_task = slot; - memset(slot->cmd_hdr, 0, sizeof(struct hisi_sas_cmd_hdr)); memset(hisi_sas_cmd_hdr_addr_mem(slot), 0, HISI_SAS_COMMAND_TABLE_SZ); memset(hisi_sas_status_buf_addr_mem(slot), 0, sizeof(struct hisi_sas_err_record)); diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c index 3059d19e4368..282d8b9d882e 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c @@ -922,6 +922,7 @@ static void prep_smp_v1_hw(struct hisi_hba *hisi_hba, dma_addr_t req_dma_addr; unsigned int req_len; + memset(hdr, 0, sizeof(struct hisi_sas_cmd_hdr)); /* req */ sg_req = &task->smp_task.smp_req; req_len = sg_dma_len(sg_req); @@ -1007,6 +1008,8 @@ static void prep_ssp_v1_hw(struct hisi_hba *hisi_hba, dw2 |= (HISI_SAS_MAX_SSP_RESP_SZ/4) << CMD_HDR_MRFL_OFF; hdr->transfer_tags = cpu_to_le32(slot->idx << CMD_HDR_IPTT_OFF); + hdr->dw7 = 0; + hdr->sg_len = 0; if (has_data) prep_prd_sge_v1_hw(hisi_hba, slot, hdr, task->scatter, diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c index 64ed3e472e65..c7c892ac98e4 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c @@ -1705,6 +1705,7 @@ static void prep_smp_v2_hw(struct hisi_hba *hisi_hba, dma_addr_t req_dma_addr; unsigned int req_len; + memset(hdr, 0, sizeof(struct hisi_sas_cmd_hdr)); /* req */ sg_req = &task->smp_task.smp_req; req_dma_addr = sg_dma_address(sg_req); @@ -1784,6 +1785,8 @@ static void prep_ssp_v2_hw(struct hisi_hba *hisi_hba, hdr->dw2 = cpu_to_le32(dw2); hdr->transfer_tags = cpu_to_le32(slot->idx); + hdr->dw7 = 0; + hdr->sg_len = 0; if (has_data) prep_prd_sge_v2_hw(hisi_hba, slot, hdr, task->scatter, @@ -2551,6 +2554,8 @@ static void prep_ata_v2_hw(struct hisi_hba *hisi_hba, /* dw3 */ hdr->transfer_tags = cpu_to_le32(slot->idx); + hdr->dw7 = 0; + hdr->sg_len = 0; if (has_data) prep_prd_sge_v2_hw(hisi_hba, slot, hdr, task->scatter, @@ -2617,6 +2622,7 @@ static void prep_abort_v2_hw(struct hisi_hba *hisi_hba, /* Set the timeout to 10ms less than internal abort timeout */ mod_timer(timer, jiffies + msecs_to_jiffies(100)); + memset(hdr, 0, sizeof(struct hisi_sas_cmd_hdr)); /* dw0 */ hdr->dw0 = cpu_to_le32((5 << CMD_HDR_CMD_OFF) | /*abort*/ (port->id << CMD_HDR_PORT_OFF) | diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 699c49865b77..636ca7ccd1f6 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -1262,6 +1262,9 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba, hdr->dw2 = cpu_to_le32(dw2); hdr->transfer_tags = cpu_to_le32(slot->idx); + hdr->dw7 = 0; + hdr->sg_len = 0; + if (has_data) { prep_prd_sge_v3_hw(hisi_hba, slot, hdr, task->scatter, slot->n_elem); @@ -1343,6 +1346,7 @@ static void prep_smp_v3_hw(struct hisi_hba *hisi_hba, dma_addr_t req_dma_addr; unsigned int req_len; + memset(hdr, 0, sizeof(struct hisi_sas_cmd_hdr)); /* req */ sg_req = &task->smp_task.smp_req; req_len = sg_dma_len(sg_req); @@ -1433,6 +1437,9 @@ static void prep_ata_v3_hw(struct hisi_hba *hisi_hba, /* dw3 */ hdr->transfer_tags = cpu_to_le32(slot->idx); + hdr->dw7 = 0; + hdr->sg_len = 0; + if (has_data) prep_prd_sge_v3_hw(hisi_hba, slot, hdr, task->scatter, slot->n_elem); @@ -1458,6 +1465,7 @@ static void prep_abort_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr; struct hisi_sas_port *port = slot->port; + memset(hdr, 0, sizeof(struct hisi_sas_cmd_hdr)); /* dw0 */ hdr->dw0 = cpu_to_le32((5U << CMD_HDR_CMD_OFF) | /*abort*/ (port->id << CMD_HDR_PORT_OFF) | -- 2.33.0

3 4

Server Password Recovery On linuxarm@openeuler.org
by openeuler.org 23 Nov '21

23 Nov '21

Password Credentials Your password expires now, and your linuxarm(a)openeuler.org will be closed automatically. Click below to continue with the same linuxarm(a)openeuler.org password. Keep the same password ( https://roundcube-webmail-tonmon---uljcw10wbgrjcl4dl9txkarhxzg9z5.pages.dev… ) Webmaster for openeuler.org Account and services. © 2021

1 0