- Linuxarm - mailweb.openeuler.org

[PATCH net-next 0/4] ethtool: extend coalesce uAPI
by Yufeng Mo 18 Aug '21

18 Aug '21

In order to support some configuration in coalesce uAPI, this RFC extends coalesce uAPI and add support for CQE mode. Below is some test result with HNS3 driver: 1. old ethtool(ioctl) + new kernel: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 20 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 20 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 2. ethtool(netlink with cqe mode) + kernel without cqe mode: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: n/a sample-interval: n/a pkt-rate-low: n/a pkt-rate-high: n/a rx-usecs: 20 rx-frames: 0 rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 20 tx-frames: 0 tx-usecs-irq: n/a tx-frames-irq: n/a rx-usecs-low: n/a rx-frame-low: n/a tx-usecs-low: n/a tx-frame-low: n/a rx-usecs-high: 0 rx-frame-high: n/a tx-usecs-high: 0 tx-frame-high: n/a CQE mode RX: n/a TX: n/a 3. ethool(netlink with cqe mode) + kernel with cqe mode: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: n/a sample-interval: n/a pkt-rate-low: n/a pkt-rate-high: n/a rx-usecs: 20 rx-frames: 0 rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 20 tx-frames: 0 tx-usecs-irq: n/a tx-frames-irq: n/a rx-usecs-low: n/a rx-frame-low: n/a tx-usecs-low: n/a tx-frame-low: n/a rx-usecs-high: 0 rx-frame-high: n/a tx-usecs-high: 0 tx-frame-high: n/a CQE mode RX: off TX: off 4. ethool(netlink without cqe mode) + kernel with cqe mode: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: n/a sample-interval: n/a pkt-rate-low: n/a pkt-rate-high: n/a rx-usecs: 20 rx-frames: 0 rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 20 tx-frames: 0 tx-usecs-irq: n/a tx-frames-irq: n/a rx-usecs-low: n/a rx-frame-low: n/a tx-usecs-low: n/a tx-frame-low: n/a rx-usecs-high: 0 rx-frame-high: n/a tx-usecs-high: 0 tx-frame-high: n/a Change log from RFC: V3 -> V4: add document explaining the difference between CQE and EQE in #1 suggested by Jakub Kicinski. V2 -> V3: 1. split #1 into adding new parameter and adding new attributes. 2. use NLA_POLICY_MAX(NLA_U8, 1) instead of NLA_U8. 3. modify the description of CQE in Document. V1 -> V2: refactor #1&#2 in V1 suggestted by Jakub Kicinski. Yufeng Mo (4): ethtool: add two coalesce attributes for CQE mode ethtool: extend coalesce setting uAPI with CQE mode net: hns3: add support for EQE/CQE mode configuration net: hns3: add ethtool support for CQE/EQE mode configuration Documentation/networking/ethtool-netlink.rst | 15 +++++++ drivers/infiniband/ulp/ipoib/ipoib_ethtool.c | 8 +++- drivers/net/ethernet/amazon/ena/ena_ethtool.c | 8 +++- drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 8 +++- .../net/ethernet/aquantia/atlantic/aq_ethtool.c | 8 +++- drivers/net/ethernet/broadcom/bcmsysport.c | 8 +++- drivers/net/ethernet/broadcom/bnx2.c | 12 ++++-- .../net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 8 +++- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 8 +++- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 +++- drivers/net/ethernet/broadcom/tg3.c | 10 ++++- drivers/net/ethernet/brocade/bna/bnad_ethtool.c | 12 ++++-- drivers/net/ethernet/cavium/liquidio/lio_ethtool.c | 8 +++- .../net/ethernet/cavium/thunder/nicvf_ethtool.c | 4 +- drivers/net/ethernet/chelsio/cxgb/cxgb2.c | 8 +++- drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 8 +++- drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 8 +++- .../net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 8 +++- drivers/net/ethernet/cisco/enic/enic_ethtool.c | 8 +++- drivers/net/ethernet/cortina/gemini.c | 8 +++- drivers/net/ethernet/emulex/benet/be_ethtool.c | 8 +++- drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 8 +++- .../net/ethernet/freescale/enetc/enetc_ethtool.c | 8 +++- drivers/net/ethernet/freescale/fec_main.c | 14 ++++--- drivers/net/ethernet/freescale/gianfar_ethtool.c | 8 +++- drivers/net/ethernet/hisilicon/hip04_eth.c | 8 +++- drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 8 +++- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 49 +++++++++++++++++++++- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 11 +++++ drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 26 ++++++++++-- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 + .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 1 + drivers/net/ethernet/huawei/hinic/hinic_ethtool.c | 8 +++- drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 8 +++- drivers/net/ethernet/intel/e1000e/ethtool.c | 8 +++- drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c | 8 +++- drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 8 +++- drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 8 +++- drivers/net/ethernet/intel/ice/ice_ethtool.c | 12 ++++-- drivers/net/ethernet/intel/igb/igb_ethtool.c | 8 +++- drivers/net/ethernet/intel/igbvf/ethtool.c | 8 +++- drivers/net/ethernet/intel/igc/igc_ethtool.c | 8 +++- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 8 +++- drivers/net/ethernet/intel/ixgbevf/ethtool.c | 8 +++- drivers/net/ethernet/jme.c | 12 ++++-- drivers/net/ethernet/marvell/mv643xx_eth.c | 12 ++++-- drivers/net/ethernet/marvell/mvneta.c | 14 +++++-- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 14 +++++-- .../ethernet/marvell/octeontx2/nic/otx2_ethtool.c | 8 +++- drivers/net/ethernet/marvell/skge.c | 8 +++- drivers/net/ethernet/marvell/sky2.c | 8 +++- drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 8 +++- .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 8 +++- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 8 +++- .../ethernet/mellanox/mlx5/core/ipoib/ethtool.c | 8 +++- drivers/net/ethernet/myricom/myri10ge/myri10ge.c | 12 ++++-- .../net/ethernet/netronome/nfp/nfp_net_ethtool.c | 8 +++- drivers/net/ethernet/ni/nixge.c | 14 +++++-- .../net/ethernet/pensando/ionic/ionic_ethtool.c | 8 +++- .../ethernet/qlogic/netxen/netxen_nic_ethtool.c | 8 +++- drivers/net/ethernet/qlogic/qede/qede.h | 4 +- drivers/net/ethernet/qlogic/qede/qede_ethtool.c | 8 +++- .../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 8 +++- drivers/net/ethernet/realtek/r8169_main.c | 10 ++++- drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c | 8 +++- drivers/net/ethernet/sfc/ethtool.c | 8 +++- drivers/net/ethernet/sfc/falcon/ethtool.c | 8 +++- drivers/net/ethernet/socionext/netsec.c | 10 +++-- .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 8 +++- drivers/net/ethernet/synopsys/dwc-xlgmac-ethtool.c | 14 +++++-- drivers/net/ethernet/tehuti/tehuti.c | 12 ++++-- drivers/net/ethernet/ti/cpsw.c | 2 +- drivers/net/ethernet/ti/cpsw_ethtool.c | 8 +++- drivers/net/ethernet/ti/cpsw_new.c | 2 +- drivers/net/ethernet/ti/cpsw_priv.h | 8 +++- drivers/net/ethernet/ti/davinci_emac.c | 8 +++- drivers/net/ethernet/via/via-velocity.c | 8 +++- drivers/net/ethernet/xilinx/ll_temac_main.c | 14 +++++-- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 14 +++++-- drivers/net/netdevsim/ethtool.c | 8 +++- drivers/net/tun.c | 8 +++- drivers/net/usb/r8152.c | 8 +++- drivers/net/virtio_net.c | 8 +++- drivers/net/vmxnet3/vmxnet3_ethtool.c | 12 ++++-- drivers/net/wireless/ath/wil6210/ethtool.c | 14 +++++-- drivers/s390/net/qeth_ethtool.c | 4 +- drivers/staging/qlge/qlge_ethtool.c | 10 ++++- include/linux/ethtool.h | 22 ++++++++-- include/uapi/linux/ethtool_netlink.h | 2 + net/ethtool/coalesce.c | 29 ++++++++++--- net/ethtool/ioctl.c | 15 +++++-- net/ethtool/netlink.h | 2 +- 93 files changed, 678 insertions(+), 208 deletions(-) -- 2.8.1

3 8

[RFC V4 net-next 0/4] ethtool: extend coalesce uAPI
by Yufeng Mo 16 Aug '21

16 Aug '21

In order to support some configuration in coalesce uAPI, this RFC extends coalesce uAPI and add support for CQE mode. Below is some test result with HNS3 driver: 1. old ethtool(ioctl) + new kernel: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 20 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 20 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 2. ethtool(netlink with cqe mode) + kernel without cqe mode: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: n/a sample-interval: n/a pkt-rate-low: n/a pkt-rate-high: n/a rx-usecs: 20 rx-frames: 0 rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 20 tx-frames: 0 tx-usecs-irq: n/a tx-frames-irq: n/a rx-usecs-low: n/a rx-frame-low: n/a tx-usecs-low: n/a tx-frame-low: n/a rx-usecs-high: 0 rx-frame-high: n/a tx-usecs-high: 0 tx-frame-high: n/a CQE mode RX: n/a TX: n/a 3. ethool(netlink with cqe mode) + kernel with cqe mode: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: n/a sample-interval: n/a pkt-rate-low: n/a pkt-rate-high: n/a rx-usecs: 20 rx-frames: 0 rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 20 tx-frames: 0 tx-usecs-irq: n/a tx-frames-irq: n/a rx-usecs-low: n/a rx-frame-low: n/a tx-usecs-low: n/a tx-frame-low: n/a rx-usecs-high: 0 rx-frame-high: n/a tx-usecs-high: 0 tx-frame-high: n/a CQE mode RX: off TX: off 4. ethool(netlink without cqe mode) + kernel with cqe mode: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: n/a sample-interval: n/a pkt-rate-low: n/a pkt-rate-high: n/a rx-usecs: 20 rx-frames: 0 rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 20 tx-frames: 0 tx-usecs-irq: n/a tx-frames-irq: n/a rx-usecs-low: n/a rx-frame-low: n/a tx-usecs-low: n/a tx-frame-low: n/a rx-usecs-high: 0 rx-frame-high: n/a tx-usecs-high: 0 tx-frame-high: n/a Change log: V3 -> V4: add document explaining the difference between CQE and EQE in #1 suggested by Jakub Kicinski. V2 -> V3: 1. split #1 into adding new parameter and adding new attributes. 2. use NLA_POLICY_MAX(NLA_U8, 1) instead of NLA_U8. 3. modify the description of CQE in Document. V1 -> V2: refactor #1&#2 in V1 suggestted by Jakub Kicinski. Yufeng Mo (4): ethtool: add two coalesce attributes for CQE mode ethtool: extend coalesce setting uAPI with CQE mode net: hns3: add support for EQE/CQE mode configuration net: hns3: add ethtool support for CQE/EQE mode configuration Documentation/networking/ethtool-netlink.rst | 15 +++++++ drivers/infiniband/ulp/ipoib/ipoib_ethtool.c | 8 +++- drivers/net/ethernet/amazon/ena/ena_ethtool.c | 8 +++- drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 8 +++- .../net/ethernet/aquantia/atlantic/aq_ethtool.c | 8 +++- drivers/net/ethernet/broadcom/bcmsysport.c | 8 +++- drivers/net/ethernet/broadcom/bnx2.c | 12 ++++-- .../net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 8 +++- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 8 +++- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 +++- drivers/net/ethernet/broadcom/tg3.c | 10 ++++- drivers/net/ethernet/brocade/bna/bnad_ethtool.c | 12 ++++-- drivers/net/ethernet/cavium/liquidio/lio_ethtool.c | 8 +++- .../net/ethernet/cavium/thunder/nicvf_ethtool.c | 4 +- drivers/net/ethernet/chelsio/cxgb/cxgb2.c | 8 +++- drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 8 +++- drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 8 +++- .../net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 8 +++- drivers/net/ethernet/cisco/enic/enic_ethtool.c | 8 +++- drivers/net/ethernet/cortina/gemini.c | 8 +++- drivers/net/ethernet/emulex/benet/be_ethtool.c | 8 +++- drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 8 +++- .../net/ethernet/freescale/enetc/enetc_ethtool.c | 8 +++- drivers/net/ethernet/freescale/fec_main.c | 14 ++++--- drivers/net/ethernet/freescale/gianfar_ethtool.c | 8 +++- drivers/net/ethernet/hisilicon/hip04_eth.c | 8 +++- drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 8 +++- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 49 +++++++++++++++++++++- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 11 +++++ drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 26 ++++++++++-- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 + .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 1 + drivers/net/ethernet/huawei/hinic/hinic_ethtool.c | 8 +++- drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 8 +++- drivers/net/ethernet/intel/e1000e/ethtool.c | 8 +++- drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c | 8 +++- drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 8 +++- drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 8 +++- drivers/net/ethernet/intel/ice/ice_ethtool.c | 12 ++++-- drivers/net/ethernet/intel/igb/igb_ethtool.c | 8 +++- drivers/net/ethernet/intel/igbvf/ethtool.c | 8 +++- drivers/net/ethernet/intel/igc/igc_ethtool.c | 8 +++- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 8 +++- drivers/net/ethernet/intel/ixgbevf/ethtool.c | 8 +++- drivers/net/ethernet/jme.c | 12 ++++-- drivers/net/ethernet/marvell/mv643xx_eth.c | 12 ++++-- drivers/net/ethernet/marvell/mvneta.c | 14 +++++-- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 14 +++++-- .../ethernet/marvell/octeontx2/nic/otx2_ethtool.c | 8 +++- drivers/net/ethernet/marvell/skge.c | 8 +++- drivers/net/ethernet/marvell/sky2.c | 8 +++- drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 8 +++- .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 8 +++- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 8 +++- .../ethernet/mellanox/mlx5/core/ipoib/ethtool.c | 8 +++- drivers/net/ethernet/myricom/myri10ge/myri10ge.c | 12 ++++-- .../net/ethernet/netronome/nfp/nfp_net_ethtool.c | 8 +++- drivers/net/ethernet/ni/nixge.c | 14 +++++-- .../net/ethernet/pensando/ionic/ionic_ethtool.c | 8 +++- .../ethernet/qlogic/netxen/netxen_nic_ethtool.c | 8 +++- drivers/net/ethernet/qlogic/qede/qede.h | 4 +- drivers/net/ethernet/qlogic/qede/qede_ethtool.c | 8 +++- .../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 8 +++- drivers/net/ethernet/realtek/r8169_main.c | 10 ++++- drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c | 8 +++- drivers/net/ethernet/sfc/ethtool.c | 8 +++- drivers/net/ethernet/sfc/falcon/ethtool.c | 8 +++- drivers/net/ethernet/socionext/netsec.c | 10 +++-- .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 8 +++- drivers/net/ethernet/synopsys/dwc-xlgmac-ethtool.c | 14 +++++-- drivers/net/ethernet/tehuti/tehuti.c | 12 ++++-- drivers/net/ethernet/ti/cpsw.c | 2 +- drivers/net/ethernet/ti/cpsw_ethtool.c | 8 +++- drivers/net/ethernet/ti/cpsw_new.c | 2 +- drivers/net/ethernet/ti/cpsw_priv.h | 8 +++- drivers/net/ethernet/ti/davinci_emac.c | 8 +++- drivers/net/ethernet/via/via-velocity.c | 8 +++- drivers/net/ethernet/xilinx/ll_temac_main.c | 14 +++++-- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 14 +++++-- drivers/net/netdevsim/ethtool.c | 8 +++- drivers/net/tun.c | 8 +++- drivers/net/usb/r8152.c | 8 +++- drivers/net/virtio_net.c | 8 +++- drivers/net/vmxnet3/vmxnet3_ethtool.c | 12 ++++-- drivers/net/wireless/ath/wil6210/ethtool.c | 14 +++++-- drivers/s390/net/qeth_ethtool.c | 4 +- drivers/staging/qlge/qlge_ethtool.c | 10 ++++- include/linux/ethtool.h | 22 ++++++++-- include/uapi/linux/ethtool_netlink.h | 2 + net/ethtool/coalesce.c | 29 ++++++++++--- net/ethtool/ioctl.c | 15 +++++-- net/ethtool/netlink.h | 2 +- 93 files changed, 678 insertions(+), 208 deletions(-) -- 2.8.1

1 4

[RFC V3 net-next 0/4] ethtool: extend coalesce uAPI
by Yufeng Mo 16 Aug '21

16 Aug '21

In order to support some configuration in coalesce uAPI, this RFC extends coalesce uAPI and add support for CQE mode. Below is some test result with HNS3 driver: 1. old ethtool(ioctl) + new kernel: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 20 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 20 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 2. ethtool(netlink with cqe mode) + kernel without cqe mode: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: n/a sample-interval: n/a pkt-rate-low: n/a pkt-rate-high: n/a rx-usecs: 20 rx-frames: 0 rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 20 tx-frames: 0 tx-usecs-irq: n/a tx-frames-irq: n/a rx-usecs-low: n/a rx-frame-low: n/a tx-usecs-low: n/a tx-frame-low: n/a rx-usecs-high: 0 rx-frame-high: n/a tx-usecs-high: 0 tx-frame-high: n/a CQE mode RX: n/a TX: n/a 3. ethool(netlink with cqe mode) + kernel with cqe mode: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: n/a sample-interval: n/a pkt-rate-low: n/a pkt-rate-high: n/a rx-usecs: 20 rx-frames: 0 rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 20 tx-frames: 0 tx-usecs-irq: n/a tx-frames-irq: n/a rx-usecs-low: n/a rx-frame-low: n/a tx-usecs-low: n/a tx-frame-low: n/a rx-usecs-high: 0 rx-frame-high: n/a tx-usecs-high: 0 tx-frame-high: n/a CQE mode RX: off TX: off 4. ethool(netlink without cqe mode) + kernel with cqe mode: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: n/a sample-interval: n/a pkt-rate-low: n/a pkt-rate-high: n/a rx-usecs: 20 rx-frames: 0 rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 20 tx-frames: 0 tx-usecs-irq: n/a tx-frames-irq: n/a rx-usecs-low: n/a rx-frame-low: n/a tx-usecs-low: n/a tx-frame-low: n/a rx-usecs-high: 0 rx-frame-high: n/a tx-usecs-high: 0 tx-frame-high: n/a Change log: V2 -> V3: 1. split #1 into adding new parameter and adding new attributes. 2. use NLA_POLICY_MAX(NLA_U8, 1) instead of NLA_U8. 3. modify the description of CQE in Document. V1 -> V2: refactor #1&#2 in V1 suggestted by Jakub Kicinski. Yufeng Mo (4): ethtool: add two coalesce attributes for CQE mode ethtool: extend coalesce setting uAPI with CQE mode net: hns3: add support for EQE/CQE mode configuration net: hns3: add ethtool support for CQE/EQE mode configuration Documentation/networking/ethtool-netlink.rst | 8 ++++ drivers/infiniband/ulp/ipoib/ipoib_ethtool.c | 8 +++- drivers/net/ethernet/amazon/ena/ena_ethtool.c | 8 +++- drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 8 +++- .../net/ethernet/aquantia/atlantic/aq_ethtool.c | 8 +++- drivers/net/ethernet/broadcom/bcmsysport.c | 8 +++- drivers/net/ethernet/broadcom/bnx2.c | 12 ++++-- .../net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 8 +++- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 8 +++- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 +++- drivers/net/ethernet/broadcom/tg3.c | 10 ++++- drivers/net/ethernet/brocade/bna/bnad_ethtool.c | 12 ++++-- drivers/net/ethernet/cavium/liquidio/lio_ethtool.c | 8 +++- .../net/ethernet/cavium/thunder/nicvf_ethtool.c | 4 +- drivers/net/ethernet/chelsio/cxgb/cxgb2.c | 8 +++- drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 8 +++- drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 8 +++- .../net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 8 +++- drivers/net/ethernet/cisco/enic/enic_ethtool.c | 8 +++- drivers/net/ethernet/cortina/gemini.c | 8 +++- drivers/net/ethernet/emulex/benet/be_ethtool.c | 8 +++- drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 8 +++- .../net/ethernet/freescale/enetc/enetc_ethtool.c | 8 +++- drivers/net/ethernet/freescale/fec_main.c | 14 ++++--- drivers/net/ethernet/freescale/gianfar_ethtool.c | 8 +++- drivers/net/ethernet/hisilicon/hip04_eth.c | 8 +++- drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 8 +++- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 49 +++++++++++++++++++++- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 11 +++++ drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 26 ++++++++++-- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 + .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 1 + drivers/net/ethernet/huawei/hinic/hinic_ethtool.c | 8 +++- drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 8 +++- drivers/net/ethernet/intel/e1000e/ethtool.c | 8 +++- drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c | 8 +++- drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 8 +++- drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 8 +++- drivers/net/ethernet/intel/ice/ice_ethtool.c | 12 ++++-- drivers/net/ethernet/intel/igb/igb_ethtool.c | 8 +++- drivers/net/ethernet/intel/igbvf/ethtool.c | 8 +++- drivers/net/ethernet/intel/igc/igc_ethtool.c | 8 +++- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 8 +++- drivers/net/ethernet/intel/ixgbevf/ethtool.c | 8 +++- drivers/net/ethernet/jme.c | 12 ++++-- drivers/net/ethernet/marvell/mv643xx_eth.c | 12 ++++-- drivers/net/ethernet/marvell/mvneta.c | 14 +++++-- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 14 +++++-- .../ethernet/marvell/octeontx2/nic/otx2_ethtool.c | 8 +++- drivers/net/ethernet/marvell/skge.c | 8 +++- drivers/net/ethernet/marvell/sky2.c | 8 +++- drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 8 +++- .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 8 +++- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 8 +++- .../ethernet/mellanox/mlx5/core/ipoib/ethtool.c | 8 +++- drivers/net/ethernet/myricom/myri10ge/myri10ge.c | 12 ++++-- .../net/ethernet/netronome/nfp/nfp_net_ethtool.c | 8 +++- drivers/net/ethernet/ni/nixge.c | 14 +++++-- .../net/ethernet/pensando/ionic/ionic_ethtool.c | 8 +++- .../ethernet/qlogic/netxen/netxen_nic_ethtool.c | 8 +++- drivers/net/ethernet/qlogic/qede/qede.h | 4 +- drivers/net/ethernet/qlogic/qede/qede_ethtool.c | 8 +++- .../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 8 +++- drivers/net/ethernet/realtek/r8169_main.c | 10 ++++- drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c | 8 +++- drivers/net/ethernet/sfc/ethtool.c | 8 +++- drivers/net/ethernet/sfc/falcon/ethtool.c | 8 +++- drivers/net/ethernet/socionext/netsec.c | 10 +++-- .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 8 +++- drivers/net/ethernet/synopsys/dwc-xlgmac-ethtool.c | 14 +++++-- drivers/net/ethernet/tehuti/tehuti.c | 12 ++++-- drivers/net/ethernet/ti/cpsw.c | 2 +- drivers/net/ethernet/ti/cpsw_ethtool.c | 8 +++- drivers/net/ethernet/ti/cpsw_new.c | 2 +- drivers/net/ethernet/ti/cpsw_priv.h | 8 +++- drivers/net/ethernet/ti/davinci_emac.c | 8 +++- drivers/net/ethernet/via/via-velocity.c | 8 +++- drivers/net/ethernet/xilinx/ll_temac_main.c | 14 +++++-- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 14 +++++-- drivers/net/netdevsim/ethtool.c | 8 +++- drivers/net/tun.c | 8 +++- drivers/net/usb/r8152.c | 8 +++- drivers/net/virtio_net.c | 8 +++- drivers/net/vmxnet3/vmxnet3_ethtool.c | 12 ++++-- drivers/net/wireless/ath/wil6210/ethtool.c | 14 +++++-- drivers/s390/net/qeth_ethtool.c | 4 +- drivers/staging/qlge/qlge_ethtool.c | 10 ++++- include/linux/ethtool.h | 22 ++++++++-- include/uapi/linux/ethtool_netlink.h | 2 + net/ethtool/coalesce.c | 29 ++++++++++--- net/ethtool/ioctl.c | 15 +++++-- net/ethtool/netlink.h | 2 +- 93 files changed, 671 insertions(+), 208 deletions(-) -- 2.8.1

3 6

I need your response
by Godwin Pete 13 Aug '21

13 Aug '21

My good friend, I just want to know if you, can help me to transfer the amount of ($6Million). After the transfer we have to share it, 50% for me, and 50% for you. Please let me know if you can help me for more information in regards with the transfer. I hope you can work with me honestly? Thanks. Godwin Peter,

1 0

[RFC V3 net-next 0/4] ethtool: extend coalesce uAPI
by Yufeng Mo 11 Aug '21

11 Aug '21

In order to support some configuration in coalesce uAPI, this RFC extends coalesce uAPI and add support for CQE mode. Below is some test result with HNS3 driver: 1. old ethtool(ioctl) + new kernel: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 20 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 20 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 2. ethtool(netlink with cqe mode) + kernel without cqe mode: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: n/a sample-interval: n/a pkt-rate-low: n/a pkt-rate-high: n/a rx-usecs: 20 rx-frames: 0 rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 20 tx-frames: 0 tx-usecs-irq: n/a tx-frames-irq: n/a rx-usecs-low: n/a rx-frame-low: n/a tx-usecs-low: n/a tx-frame-low: n/a rx-usecs-high: 0 rx-frame-high: n/a tx-usecs-high: 0 tx-frame-high: n/a CQE mode RX: n/a TX: n/a 3. ethool(netlink with cqe mode) + kernel with cqe mode: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: n/a sample-interval: n/a pkt-rate-low: n/a pkt-rate-high: n/a rx-usecs: 20 rx-frames: 0 rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 20 tx-frames: 0 tx-usecs-irq: n/a tx-frames-irq: n/a rx-usecs-low: n/a rx-frame-low: n/a tx-usecs-low: n/a tx-frame-low: n/a rx-usecs-high: 0 rx-frame-high: n/a tx-usecs-high: 0 tx-frame-high: n/a CQE mode RX: off TX: off 4. ethool(netlink without cqe mode) + kernel with cqe mode: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: n/a sample-interval: n/a pkt-rate-low: n/a pkt-rate-high: n/a rx-usecs: 20 rx-frames: 0 rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 20 tx-frames: 0 tx-usecs-irq: n/a tx-frames-irq: n/a rx-usecs-low: n/a rx-frame-low: n/a tx-usecs-low: n/a tx-frame-low: n/a rx-usecs-high: 0 rx-frame-high: n/a tx-usecs-high: 0 tx-frame-high: n/a Change log: V2 -> V3: 1. split #1 into adding new parameter and adding new attributes. 2. use NLA_POLICY_MAX(NLA_U8, 1) instead of NLA_U8. 3. modify the description of CQE in Document. V1 -> V2: refactor #1&#2 in V1 suggestted by Jakub Kicinski. Yufeng Mo (4): ethtool: add two coalesce attributes for CQE mode ethtool: extend coalesce setting uAPI with CQE mode net: hns3: add support for EQE/CQE mode configuration net: hns3: add ethtool support for CQE/EQE mode configuration Documentation/networking/ethtool-netlink.rst | 8 ++++ drivers/infiniband/ulp/ipoib/ipoib_ethtool.c | 8 +++- drivers/net/ethernet/amazon/ena/ena_ethtool.c | 8 +++- drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 8 +++- .../net/ethernet/aquantia/atlantic/aq_ethtool.c | 8 +++- drivers/net/ethernet/broadcom/bcmsysport.c | 8 +++- drivers/net/ethernet/broadcom/bnx2.c | 12 ++++-- .../net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 8 +++- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 8 +++- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 +++- drivers/net/ethernet/broadcom/tg3.c | 10 ++++- drivers/net/ethernet/brocade/bna/bnad_ethtool.c | 12 ++++-- drivers/net/ethernet/cavium/liquidio/lio_ethtool.c | 8 +++- .../net/ethernet/cavium/thunder/nicvf_ethtool.c | 4 +- drivers/net/ethernet/chelsio/cxgb/cxgb2.c | 8 +++- drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 8 +++- drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 8 +++- .../net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 8 +++- drivers/net/ethernet/cisco/enic/enic_ethtool.c | 8 +++- drivers/net/ethernet/cortina/gemini.c | 8 +++- drivers/net/ethernet/emulex/benet/be_ethtool.c | 8 +++- drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 8 +++- .../net/ethernet/freescale/enetc/enetc_ethtool.c | 8 +++- drivers/net/ethernet/freescale/fec_main.c | 14 ++++--- drivers/net/ethernet/freescale/gianfar_ethtool.c | 8 +++- drivers/net/ethernet/hisilicon/hip04_eth.c | 8 +++- drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 8 +++- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 49 +++++++++++++++++++++- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 11 +++++ drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 26 ++++++++++-- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 + .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 1 + drivers/net/ethernet/huawei/hinic/hinic_ethtool.c | 8 +++- drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 8 +++- drivers/net/ethernet/intel/e1000e/ethtool.c | 8 +++- drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c | 8 +++- drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 8 +++- drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 8 +++- drivers/net/ethernet/intel/ice/ice_ethtool.c | 12 ++++-- drivers/net/ethernet/intel/igb/igb_ethtool.c | 8 +++- drivers/net/ethernet/intel/igbvf/ethtool.c | 8 +++- drivers/net/ethernet/intel/igc/igc_ethtool.c | 8 +++- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 8 +++- drivers/net/ethernet/intel/ixgbevf/ethtool.c | 8 +++- drivers/net/ethernet/jme.c | 12 ++++-- drivers/net/ethernet/marvell/mv643xx_eth.c | 12 ++++-- drivers/net/ethernet/marvell/mvneta.c | 14 +++++-- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 14 +++++-- .../ethernet/marvell/octeontx2/nic/otx2_ethtool.c | 8 +++- drivers/net/ethernet/marvell/skge.c | 8 +++- drivers/net/ethernet/marvell/sky2.c | 8 +++- drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 8 +++- .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 8 +++- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 8 +++- .../ethernet/mellanox/mlx5/core/ipoib/ethtool.c | 8 +++- drivers/net/ethernet/myricom/myri10ge/myri10ge.c | 12 ++++-- .../net/ethernet/netronome/nfp/nfp_net_ethtool.c | 8 +++- drivers/net/ethernet/ni/nixge.c | 14 +++++-- .../net/ethernet/pensando/ionic/ionic_ethtool.c | 8 +++- .../ethernet/qlogic/netxen/netxen_nic_ethtool.c | 8 +++- drivers/net/ethernet/qlogic/qede/qede.h | 4 +- drivers/net/ethernet/qlogic/qede/qede_ethtool.c | 8 +++- .../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 8 +++- drivers/net/ethernet/realtek/r8169_main.c | 10 ++++- drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c | 8 +++- drivers/net/ethernet/sfc/ethtool.c | 8 +++- drivers/net/ethernet/sfc/falcon/ethtool.c | 8 +++- drivers/net/ethernet/socionext/netsec.c | 10 +++-- .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 8 +++- drivers/net/ethernet/synopsys/dwc-xlgmac-ethtool.c | 14 +++++-- drivers/net/ethernet/tehuti/tehuti.c | 12 ++++-- drivers/net/ethernet/ti/cpsw.c | 2 +- drivers/net/ethernet/ti/cpsw_ethtool.c | 8 +++- drivers/net/ethernet/ti/cpsw_new.c | 2 +- drivers/net/ethernet/ti/cpsw_priv.h | 8 +++- drivers/net/ethernet/ti/davinci_emac.c | 8 +++- drivers/net/ethernet/via/via-velocity.c | 8 +++- drivers/net/ethernet/xilinx/ll_temac_main.c | 14 +++++-- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 14 +++++-- drivers/net/netdevsim/ethtool.c | 8 +++- drivers/net/tun.c | 8 +++- drivers/net/usb/r8152.c | 8 +++- drivers/net/virtio_net.c | 8 +++- drivers/net/vmxnet3/vmxnet3_ethtool.c | 12 ++++-- drivers/net/wireless/ath/wil6210/ethtool.c | 14 +++++-- drivers/s390/net/qeth_ethtool.c | 4 +- drivers/staging/qlge/qlge_ethtool.c | 10 ++++- include/linux/ethtool.h | 22 ++++++++-- include/uapi/linux/ethtool_netlink.h | 2 + net/ethtool/coalesce.c | 29 ++++++++++--- net/ethtool/ioctl.c | 15 +++++-- net/ethtool/netlink.h | 2 +- 93 files changed, 671 insertions(+), 208 deletions(-) -- 2.8.1

1 4

[PATCH net V2] page_pool: mask the page->signature before the checking
by Yunsheng Lin 09 Aug '21

09 Aug '21

As mentioned in commit c07aea3ef4d4 ("mm: add a signature in struct page"): "The page->signature field is aliased to page->lru.next and page->compound_head." And as the comment in page_is_pfmemalloc(): "lru.next has bit 1 set if the page is allocated from the pfmemalloc reserves. Callers may simply overwrite it if they do not need to preserve that information." The page->signature is OR’ed with PP_SIGNATURE when a page is allocated in page pool, see __page_pool_alloc_pages_slow(), and page->signature is checked directly with PP_SIGNATURE in page_pool_return_skb_page(), which might cause resoure leaking problem for a page from page pool if bit 1 of lru.next is set for a pfmemalloc page. What happens here is that the original pp->signature is OR'ed with PP_SIGNATURE after the allocation in order to preserve any existing bits(such as the bit 1, used to indicate a pfmemalloc page), so when those bits are present, those page is not considered to be from page pool and the DMA mapping of those pages will be left stale. As bit 0 is for page->compound_head, So mask both bit 0/1 before the checking in page_pool_return_skb_page(). And we will return those pfmemalloc pages back to the page allocator after cleaning up the DMA mapping. Fixes: 6a5bcd84e886 ("page_pool: Allow drivers to hint on SKB recycling") Reviewed-by: Ilias Apalodimas <ilias.apalodimas(a)linaro.org> Signed-off-by: Yunsheng Lin <linyunsheng(a)huawei.com> --- V2: explain more on why we need to mask those bits. --- net/core/page_pool.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/net/core/page_pool.c b/net/core/page_pool.c index 5e4eb45..8ab7b40 100644 --- a/net/core/page_pool.c +++ b/net/core/page_pool.c @@ -634,7 +634,15 @@ bool page_pool_return_skb_page(struct page *page) struct page_pool *pp; page = compound_head(page); - if (unlikely(page->pp_magic != PP_SIGNATURE)) + + /* page->pp_magic is OR'ed with PP_SIGNATURE after the allocation + * in order to preserve any existing bits, such as bit 0 for the + * head page of compound page and bit 1 for pfmemalloc page, so + * mask those bits for freeing side when doing below checking, + * and page_is_pfmemalloc() is checked in __page_pool_put_page() + * to avoid recycling the pfmemalloc page. + */ + if (unlikely((page->pp_magic & ~0x3UL) != PP_SIGNATURE)) return false; pp = page->pp; -- 2.7.4

2 1

[PATCH net-next] net: hns3: add support for triggering reset by ethtool
by Yufeng Mo 06 Aug '21

06 Aug '21

Currently, four reset types are supported for the HNS3 ethernet driver: IMP reset, global reset, function reset, and FLR. Only FLR can now be triggered by the user. To restore the device when an exception occurs, add support for triggering reset by ethtool. Run the "ethtool --reset DEVNAME mgmt | all | dedicated" to trigger the IMP | global | function reset manually. In addition, VF can only trigger function reset. Signed-off-by: Yufeng Mo <moyufeng(a)huawei.com> --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 5 ++ drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 56 ++++++++++++++++++++++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 6 +++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 1 + 4 files changed, 68 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h index 15af3d9..f40d44a 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h @@ -593,6 +593,11 @@ struct hns3_hw_error_info { const char *msg; }; +struct hns3_reset_type_map { + enum ethtool_reset_flags rst_flags; + enum hnae3_reset_type rst_type; +}; + static inline int ring_space(struct hns3_enet_ring *ring) { /* This smp_load_acquire() pairs with smp_store_release() in diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c index 82061ab..c8f09b0 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c @@ -953,6 +953,60 @@ static int hns3_get_rxnfc(struct net_device *netdev, } } +static const struct hns3_reset_type_map hns3_reset_type[] = { + {ETH_RESET_MGMT, HNAE3_IMP_RESET}, + {ETH_RESET_ALL, HNAE3_GLOBAL_RESET}, + {ETH_RESET_DEDICATED, HNAE3_FUNC_RESET}, +}; + +static const struct hns3_reset_type_map hns3vf_reset_type[] = { + {ETH_RESET_DEDICATED, HNAE3_VF_FUNC_RESET}, +}; + +static int hns3_set_reset(struct net_device *netdev, u32 *flags) +{ + enum hnae3_reset_type rst_type = HNAE3_NONE_RESET; + struct hnae3_handle *h = hns3_get_handle(netdev); + struct hnae3_ae_dev *ae_dev = pci_get_drvdata(h->pdev); + const struct hnae3_ae_ops *ops = h->ae_algo->ops; + const struct hns3_reset_type_map *rst_type_map; + u32 i, size; + + if (ops->ae_dev_resetting && ops->ae_dev_resetting(h)) + return -EBUSY; + + if (!ops->set_default_reset_request || !ops->reset_event) + return -EOPNOTSUPP; + + if (h->flags & HNAE3_SUPPORT_VF) { + rst_type_map = hns3vf_reset_type; + size = ARRAY_SIZE(hns3vf_reset_type); + } else { + rst_type_map = hns3_reset_type; + size = ARRAY_SIZE(hns3_reset_type); + } + + for (i = 0; i < size; i++) { + if (rst_type_map[i].rst_flags == *flags) { + rst_type = rst_type_map[i].rst_type; + break; + } + } + + if (rst_type == HNAE3_NONE_RESET || + (rst_type == HNAE3_IMP_RESET && + ae_dev->dev_version <= HNAE3_DEVICE_VERSION_V2)) + return -EOPNOTSUPP; + + netdev_info(netdev, "Setting reset type %d\n", rst_type); + + ops->set_default_reset_request(ae_dev, rst_type); + + ops->reset_event(h->pdev, h); + + return 0; +} + static void hns3_change_all_ring_bd_num(struct hns3_nic_priv *priv, u32 tx_desc_num, u32 rx_desc_num) { @@ -1699,6 +1753,7 @@ static const struct ethtool_ops hns3vf_ethtool_ops = { .set_priv_flags = hns3_set_priv_flags, .get_tunable = hns3_get_tunable, .set_tunable = hns3_set_tunable, + .reset = hns3_set_reset, }; static const struct ethtool_ops hns3_ethtool_ops = { @@ -1740,6 +1795,7 @@ static const struct ethtool_ops hns3_ethtool_ops = { .get_ts_info = hns3_get_ts_info, .get_tunable = hns3_get_tunable, .set_tunable = hns3_set_tunable, + .reset = hns3_set_reset, }; void hns3_ethtool_set_ops(struct net_device *netdev) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index f15d76e..9fd1528 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -3789,6 +3789,12 @@ static void hclge_do_reset(struct hclge_dev *hdev) } switch (hdev->reset_type) { + case HNAE3_IMP_RESET: + dev_info(&pdev->dev, "IMP reset requested\n"); + val = hclge_read_dev(&hdev->hw, HCLGE_PF_OTHER_INT_REG); + hnae3_set_bit(val, HCLGE_TRIGGER_IMP_RESET_B, 1); + hclge_write_dev(&hdev->hw, HCLGE_PF_OTHER_INT_REG, val); + break; case HNAE3_GLOBAL_RESET: dev_info(&pdev->dev, "global reset requested\n"); val = hclge_read_dev(&hdev->hw, HCLGE_GLOBAL_RESET_REG); diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h index cc31b12..ada5c68 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h @@ -194,6 +194,7 @@ enum HLCGE_PORT_TYPE { #define HCLGE_VECTOR0_IMP_CMDQ_ERR_B 4U #define HCLGE_VECTOR0_IMP_RD_POISON_B 5U #define HCLGE_VECTOR0_ALL_MSIX_ERR_B 6U +#define HCLGE_TRIGGER_IMP_RESET_B 7U #define HCLGE_MAC_DEFAULT_FRAME \ (ETH_HLEN + ETH_FCS_LEN + 2 * VLAN_HLEN + ETH_DATA_LEN) -- 2.8.1

1 0

[PATCH net-next 0/4] add frag page support in page pool
by Yunsheng Lin 06 Aug '21

06 Aug '21

This patchset adds frag page support in page pool and enable skb's page frag recycling based on page pool in hns3 drvier. V1: 1. avoid atomic_long_read() in case of freeing or draining page frag, and drop RFC tag. RFC v6: 1. Disable frag page support in system 32-bit arch and 64-bit DMA. RFC v5: 1. Rename dma_addr[0] to pp_frag_count and adjust codes according to the rename. RFC v4: 1. Use the dma_addr[1] to store bias. 2. Default to a pagecnt_bias of PAGE_SIZE - 1. 3. other minor comment suggested by Alexander. RFC v3: 1. Implement the semantic of "page recycling only wait for the page pool user instead of all user of a page" 2. Support the frag allocation of different sizes 3. Merge patch 4 & 5 to one patch as it does not make sense to use page_pool_dev_alloc_pages() API directly with elevated refcnt. 4. other minor comment suggested by Alexander. RFC v2: 1. Split patch 1 to more reviewable one. 2. Repurpose the lower 12 bits of the dma address to store the pagecnt_bias as suggested by Alexander. 3. support recycling to pool->alloc for elevated refcnt case too. Yunsheng Lin (4): page_pool: keep pp info as long as page pool owns the page page_pool: add interface to manipulate frag count in page pool page_pool: add frag page recycling support in page pool net: hns3: support skb's frag page recycling based on page pool drivers/net/ethernet/hisilicon/Kconfig | 1 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 79 +++++++++++++++-- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 3 + drivers/net/ethernet/marvell/mvneta.c | 6 +- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 2 +- drivers/net/ethernet/ti/cpsw.c | 2 +- drivers/net/ethernet/ti/cpsw_new.c | 2 +- include/linux/mm_types.h | 18 ++-- include/linux/skbuff.h | 4 +- include/net/page_pool.h | 68 +++++++++++--- net/core/page_pool.c | 112 +++++++++++++++++++++++- 11 files changed, 258 insertions(+), 39 deletions(-) -- 2.7.4

2 6

[PATCH net] page_pool: mask the page->signature before the checking
by Yunsheng Lin 05 Aug '21

05 Aug '21

As mentioned in commit c07aea3ef4d4 ("mm: add a signature in struct page"): "The page->signature field is aliased to page->lru.next and page->compound_head." And as the comment in page_is_pfmemalloc(): "lru.next has bit 1 set if the page is allocated from the pfmemalloc reserves. Callers may simply overwrite it if they do not need to preserve that information." The page->signature is or’ed with PP_SIGNATURE when a page is allocated in page pool, see __page_pool_alloc_pages_slow(), and page->signature is checked directly with PP_SIGNATURE in page_pool_return_skb_page(), which might cause resoure leaking problem for a page from page pool if bit 1 of lru.next is set for a pfmemalloc page. As bit 0 is page->compound_head, So mask both bit 0 and 1 before the checking in page_pool_return_skb_page(). Fixes: 6a5bcd84e886 ("page_pool: Allow drivers to hint on SKB recycling") Signed-off-by: Yunsheng Lin <linyunsheng(a)huawei.com> --- net/core/page_pool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/page_pool.c b/net/core/page_pool.c index 5e4eb45..33b7dd7 100644 --- a/net/core/page_pool.c +++ b/net/core/page_pool.c @@ -634,7 +634,7 @@ bool page_pool_return_skb_page(struct page *page) struct page_pool *pp; page = compound_head(page); - if (unlikely(page->pp_magic != PP_SIGNATURE)) + if (unlikely((page->pp_magic & ~0x3UL) != PP_SIGNATURE)) return false; pp = page->pp; -- 2.7.4

3 5

[PATCH net] net: sched: fix lockdep_set_class() typo error for sch->seqlock
by Yunsheng Lin 04 Aug '21

04 Aug '21

According to comment in qdisc_alloc(), sch->seqlock's lockdep class key should be set to qdisc_tx_busylock, due to possible type error, sch->busylock's lockdep class key is set to qdisc_tx_busylock, which is duplicated because sch->busylock's lockdep class key is already set in qdisc_alloc(). So fix it by replacing sch->busylock with sch->seqlock. Fixes: 96009c7d500e ("sched: replace __QDISC_STATE_RUNNING bit with a spin lock") Signed-off-by: Yunsheng Lin <linyunsheng(a)huawei.com> --- commit ab92d68fc22f ("net: core: add generic lockdep keys") seems to fix the above error without mentioning that, and then it is reverted by commit 1a33e10e4a95 ("net: partially revert dynamic lockdep key changes"), but the blamed commit still be 96009c7d500e ("sched: replace __QDISC_STATE_RUNNING bit with a spin lock"). --- net/sched/sch_generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index d9ac60f..a8dd06c 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -913,7 +913,7 @@ struct Qdisc *qdisc_alloc(struct netdev_queue *dev_queue, /* seqlock has the same scope of busylock, for NOLOCK qdisc */ spin_lock_init(&sch->seqlock); - lockdep_set_class(&sch->busylock, + lockdep_set_class(&sch->seqlock, dev->qdisc_tx_busylock ?: &qdisc_tx_busylock); seqcount_init(&sch->running); -- 2.7.4

2 1