- Linuxarm - mailweb.openeuler.org

Re: [RFC PATCH v6 3/4] scheduler: scan idle cpu in cluster for tasks within one LLC
by Dietmar Eggemann 26 May '21

26 May '21

On 03/05/2021 13:35, Song Bao Hua (Barry Song) wrote: [...] >> From: Song Bao Hua (Barry Song) [...] >>> From: Dietmar Eggemann [mailto:dietmar.eggemann@arm.com] [...] >>> On 29/04/2021 00:41, Song Bao Hua (Barry Song) wrote: >>>> >>>> >>>>> -----Original Message----- >>>>> From: Dietmar Eggemann [mailto:dietmar.eggemann@arm.com] >>> >>> [...] >>> >>>>>>>> From: Dietmar Eggemann [mailto:dietmar.eggemann@arm.com] >>>>> >>>>> [...] >>>>> >>>>>>>> On 20/04/2021 02:18, Barry Song wrote: [...] > > On the other hand, according to "sched: Implement smarter wake-affine logic" > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… > > Proper factor in wake_wide is mainly beneficial of 1:n tasks like postgresql/pgbench. > So using the smaller cluster size as factor might help make wake_affine false so > improve pgbench. > > From the commit log, while clients = 2*cpus, the commit made the biggest > improvement. In my case, It should be clients=48 for a machine whose LLC > size is 24. > > In Linux, I created a 240MB database and ran "pgbench -c 48 -S -T 20 pgbench" > under two different scenarios: > 1. page cache always hit, so no real I/O for database read > 2. echo 3 > /proc/sys/vm/drop_caches > > For case 1, using cluster_size and using llc_size will result in similar > tps= ~108000, all of 24 cpus have 100% cpu utilization. > > For case 2, using llc_size still shows better performance. > > tps for each test round(cluster size as factor in wake_wide): > 1398.450887 1275.020401 1632.542437 1412.241627 1611.095692 1381.354294 1539.877146 > avg tps = 1464 > > tps for each test round(llc size as factor in wake_wide): > 1718.402983 1443.169823 1502.353823 1607.415861 1597.396924 1745.651814 1876.802168 > avg tps = 1641 (+12%) > > so it seems using cluster_size as factor in "slave >= factor && master >= slave * > factor" isn't a good choice for my machine at least. So SD size = 4 (instead of 24) seems to be too small for `-c 48`. Just curious, have you seen the benefit of using wake wide on SD size = 24 (LLC) compared to not using it at all?

2 4

[PATCH v5] topology: use bin_attribute to avoid buff overflow
by Tian Tao 25 May '21

25 May '21

Use bin_attribute to display thread_siblings/core_cpus/core_siblings, die_cpus/package_cpus/book_siblings/drawer_siblings,avoiding NR_CPUS too big to cause buff overflow. This patch is based on the following discussion. https://www.spinics.net/lists/linux-doc/msg95921.html Signed-off-by: Tian Tao <tiantao6(a)hisilicon.com> --- v2: rewrite the function name##_read v3: remove the temp buffer. v4: rewrite the function name##_read v4: rewrite the patch --- drivers/base/topology.c | 139 ++++++++++++++++++++++++++++++------------------ 1 file changed, 87 insertions(+), 52 deletions(-) diff --git a/drivers/base/topology.c b/drivers/base/topology.c index 4d254fc..443e2b8 100644 --- a/drivers/base/topology.c +++ b/drivers/base/topology.c @@ -14,6 +14,9 @@ #include <linux/hardirq.h> #include <linux/topology.h> +/* BUFF_SIZE need 9 chars per 32 bits. */ +#define BUFF_SIZE ((NR_CPUS/32)*9) + #define define_id_show_func(name) \ static ssize_t name##_show(struct device *dev, \ struct device_attribute *attr, char *buf) \ @@ -21,25 +24,41 @@ static ssize_t name##_show(struct device *dev, \ return sysfs_emit(buf, "%d\n", topology_##name(dev->id)); \ } -#define define_siblings_show_map(name, mask) \ -static ssize_t name##_show(struct device *dev, \ - struct device_attribute *attr, char *buf) \ -{ \ - return cpumap_print_to_pagebuf(false, buf, topology_##mask(dev->id));\ +#define define_siblings_read_func(name, mask) \ +static ssize_t name##_read(struct file *file, struct kobject *kobj, \ + struct bin_attribute *attr, char *buf, \ + loff_t off, size_t count) \ +{ \ + struct device *dev = kobj_to_dev(kobj); \ + int len; \ + void *data; \ + data = kvmalloc(BUFF_SIZE, GFP_KERNEL); \ + if (!data) \ + return -ENOMEM; \ + len = scnprintf(data, BUFF_SIZE, "%*pb\n", nr_cpu_ids, \ + cpumask_bits(topology_##mask(dev->id))); \ + len = memory_read_from_buffer(buf, count, &off, data, len); \ + kvfree(data); \ + return len; \ +} \ + \ +static ssize_t name##_list_read(struct file *file, struct kobject *kobj, \ + struct bin_attribute *attr, char *buf, \ + loff_t off, size_t count) \ +{ \ + struct device *dev = kobj_to_dev(kobj); \ + int len; \ + void *data; \ + data = kvmalloc(BUFF_SIZE, GFP_KERNEL); \ + if (!data) \ + return -ENOMEM; \ + len = scnprintf(data, BUFF_SIZE, "%*pbl\n", nr_cpu_ids, \ + cpumask_bits(topology_##mask(dev->id))); \ + len = memory_read_from_buffer(buf, count, &off, data, len); \ + kvfree(data); \ + return len; \ } -#define define_siblings_show_list(name, mask) \ -static ssize_t name##_list_show(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - return cpumap_print_to_pagebuf(true, buf, topology_##mask(dev->id));\ -} - -#define define_siblings_show_func(name, mask) \ - define_siblings_show_map(name, mask); \ - define_siblings_show_list(name, mask) - define_id_show_func(physical_package_id); static DEVICE_ATTR_RO(physical_package_id); @@ -49,71 +68,87 @@ static DEVICE_ATTR_RO(die_id); define_id_show_func(core_id); static DEVICE_ATTR_RO(core_id); -define_siblings_show_func(thread_siblings, sibling_cpumask); -static DEVICE_ATTR_RO(thread_siblings); -static DEVICE_ATTR_RO(thread_siblings_list); +define_siblings_read_func(thread_siblings, sibling_cpumask); +static BIN_ATTR_RO(thread_siblings, 0); +static BIN_ATTR_RO(thread_siblings_list, 0); + + +define_siblings_read_func(core_cpus, sibling_cpumask); +static BIN_ATTR_RO(core_cpus, 0); +static BIN_ATTR_RO(core_cpus_list, 0); + +define_siblings_read_func(core_siblings, core_cpumask); +static BIN_ATTR_RO(core_siblings, 0); +static BIN_ATTR_RO(core_siblings_list, 0); -define_siblings_show_func(core_cpus, sibling_cpumask); -static DEVICE_ATTR_RO(core_cpus); -static DEVICE_ATTR_RO(core_cpus_list); -define_siblings_show_func(core_siblings, core_cpumask); -static DEVICE_ATTR_RO(core_siblings); -static DEVICE_ATTR_RO(core_siblings_list); +define_siblings_read_func(die_cpus, die_cpumask); +static BIN_ATTR_RO(die_cpus, 0); +static BIN_ATTR_RO(die_cpus_list, 0); -define_siblings_show_func(die_cpus, die_cpumask); -static DEVICE_ATTR_RO(die_cpus); -static DEVICE_ATTR_RO(die_cpus_list); -define_siblings_show_func(package_cpus, core_cpumask); -static DEVICE_ATTR_RO(package_cpus); -static DEVICE_ATTR_RO(package_cpus_list); +define_siblings_read_func(package_cpus, core_cpumask); +static BIN_ATTR_RO(package_cpus, 0); +static BIN_ATTR_RO(package_cpus_list, 0); + #ifdef CONFIG_SCHED_BOOK define_id_show_func(book_id); static DEVICE_ATTR_RO(book_id); -define_siblings_show_func(book_siblings, book_cpumask); -static DEVICE_ATTR_RO(book_siblings); -static DEVICE_ATTR_RO(book_siblings_list); +define_siblings_read_func(book_siblings, book_cpumask); +static BIN_ATTR_RO(book_siblings, 0); +static BIN_ATTR_RO(book_siblings_list, 0); + #endif #ifdef CONFIG_SCHED_DRAWER define_id_show_func(drawer_id); static DEVICE_ATTR_RO(drawer_id); -define_siblings_show_func(drawer_siblings, drawer_cpumask); -static DEVICE_ATTR_RO(drawer_siblings); -static DEVICE_ATTR_RO(drawer_siblings_list); +define_siblings_read_func(drawer_siblings, drawer_cpumask); +static BIN_ATTR_RO(drawer_siblings, 0); +static BIN_ATTR_RO(drawer_siblings_list, 0); + +#endif + + +static struct bin_attribute *bin_attrs[] = { + &bin_attr_core_cpus, + &bin_attr_core_cpus_list, + &bin_attr_thread_siblings, + &bin_attr_thread_siblings_list, + &bin_attr_core_siblings, + &bin_attr_core_siblings_list, + &bin_attr_die_cpus, + &bin_attr_die_cpus_list, + &bin_attr_package_cpus, + &bin_attr_package_cpus_list, +#ifdef CONFIG_SCHED_BOOK + &bin_attr_book_siblings, + &bin_attr_book_siblings_list, #endif +#ifdef CONFIG_SCHED_DRAWER + &bin_attr_drawer_siblings, + &bin_attr_drawer_siblings_list, +#endif + NULL, +}; static struct attribute *default_attrs[] = { &dev_attr_physical_package_id.attr, &dev_attr_die_id.attr, &dev_attr_core_id.attr, - &dev_attr_thread_siblings.attr, - &dev_attr_thread_siblings_list.attr, - &dev_attr_core_cpus.attr, - &dev_attr_core_cpus_list.attr, - &dev_attr_core_siblings.attr, - &dev_attr_core_siblings_list.attr, - &dev_attr_die_cpus.attr, - &dev_attr_die_cpus_list.attr, - &dev_attr_package_cpus.attr, - &dev_attr_package_cpus_list.attr, #ifdef CONFIG_SCHED_BOOK &dev_attr_book_id.attr, - &dev_attr_book_siblings.attr, - &dev_attr_book_siblings_list.attr, #endif #ifdef CONFIG_SCHED_DRAWER &dev_attr_drawer_id.attr, - &dev_attr_drawer_siblings.attr, - &dev_attr_drawer_siblings_list.attr, #endif NULL }; static const struct attribute_group topology_attr_group = { .attrs = default_attrs, + .bin_attrs = bin_attrs, .name = "topology" }; -- 2.7.4

1 0

[PATCH v4] topology: use bin_attribute to avoid buff overflow
by Tian Tao 25 May '21

25 May '21

Use bin_attribute to display thread_siblings/core_cpus/core_siblings, die_cpus/package_cpus/book_siblings/drawer_siblings,avoiding NR_CPUS too big to cause buff overflow. This patch is based on the following discussion. https://www.spinics.net/lists/linux-doc/msg95921.html Signed-off-by: Tian Tao <tiantao6(a)hisilicon.com> --- v2: rewrite the function name##_read v3: remove the temp buffer. v4: rewrite the function name##_read --- drivers/base/topology.c | 64 +++++++++++++++++++++++++++++++++---------------- 1 file changed, 44 insertions(+), 20 deletions(-) diff --git a/drivers/base/topology.c b/drivers/base/topology.c index 4d254fc..6b160ea 100644 --- a/drivers/base/topology.c +++ b/drivers/base/topology.c @@ -14,6 +14,9 @@ #include <linux/hardirq.h> #include <linux/topology.h> +/* BUFF_SIZE need 9 chars per 32 bits. */ +#define BUFF_SIZE ((NR_CPUS/32)*9) + #define define_id_show_func(name) \ static ssize_t name##_show(struct device *dev, \ struct device_attribute *attr, char *buf) \ @@ -21,11 +24,22 @@ static ssize_t name##_show(struct device *dev, \ return sysfs_emit(buf, "%d\n", topology_##name(dev->id)); \ } -#define define_siblings_show_map(name, mask) \ -static ssize_t name##_show(struct device *dev, \ - struct device_attribute *attr, char *buf) \ -{ \ - return cpumap_print_to_pagebuf(false, buf, topology_##mask(dev->id));\ +#define define_siblings_read(name, mask) \ +static ssize_t name##_read(struct file *file, struct kobject *kobj, \ + struct bin_attribute *attr, char *buf, \ + loff_t off, size_t count) \ +{ \ + struct device *dev = kobj_to_dev(kobj); \ + int len; \ + void *data; \ + data = kvmalloc(BUFF_SIZE, GFP_KERNEL); \ + if (!data) \ + return -ENOMEM; \ + len = scnprintf(data, BUFF_SIZE, "%*pb\n", nr_cpu_ids, \ + cpumask_bits(topology_##mask(dev->id))); \ + len = memory_read_from_buffer(buf, count, &off, data, len); \ + kvfree(data); \ + return len; \ } #define define_siblings_show_list(name, mask) \ @@ -37,7 +51,7 @@ static ssize_t name##_list_show(struct device *dev, \ } #define define_siblings_show_func(name, mask) \ - define_siblings_show_map(name, mask); \ + define_siblings_read(name, mask); \ define_siblings_show_list(name, mask) define_id_show_func(physical_package_id); @@ -50,30 +64,30 @@ define_id_show_func(core_id); static DEVICE_ATTR_RO(core_id); define_siblings_show_func(thread_siblings, sibling_cpumask); -static DEVICE_ATTR_RO(thread_siblings); +static BIN_ATTR_RO(thread_siblings, 0); static DEVICE_ATTR_RO(thread_siblings_list); define_siblings_show_func(core_cpus, sibling_cpumask); -static DEVICE_ATTR_RO(core_cpus); +static BIN_ATTR_RO(core_cpus, 0); static DEVICE_ATTR_RO(core_cpus_list); define_siblings_show_func(core_siblings, core_cpumask); -static DEVICE_ATTR_RO(core_siblings); +static BIN_ATTR_RO(core_siblings, 0); static DEVICE_ATTR_RO(core_siblings_list); define_siblings_show_func(die_cpus, die_cpumask); -static DEVICE_ATTR_RO(die_cpus); +static BIN_ATTR_RO(die_cpus, 0); static DEVICE_ATTR_RO(die_cpus_list); define_siblings_show_func(package_cpus, core_cpumask); -static DEVICE_ATTR_RO(package_cpus); +static BIN_ATTR_RO(package_cpus, 0); static DEVICE_ATTR_RO(package_cpus_list); #ifdef CONFIG_SCHED_BOOK define_id_show_func(book_id); static DEVICE_ATTR_RO(book_id); define_siblings_show_func(book_siblings, book_cpumask); -static DEVICE_ATTR_RO(book_siblings); +static BIN_ATTR_RO(book_siblings, 0); static DEVICE_ATTR_RO(book_siblings_list); #endif @@ -81,32 +95,41 @@ static DEVICE_ATTR_RO(book_siblings_list); define_id_show_func(drawer_id); static DEVICE_ATTR_RO(drawer_id); define_siblings_show_func(drawer_siblings, drawer_cpumask); -static DEVICE_ATTR_RO(drawer_siblings); +static BIN_ATTR_RO(drawer_siblings, 0; static DEVICE_ATTR_RO(drawer_siblings_list); #endif + +static struct bin_attribute *bin_attrs[] = { + &bin_attr_thread_siblings, + &bin_attr_core_cpus, + &bin_attr_core_siblings, + &bin_attr_die_cpus, + &bin_attr_package_cpus, +#ifdef CONFIG_SCHED_BOOK + &bin_attr_book_siblings, +#endif +#ifdef CONFIG_SCHED_DRAWER + &bin_attr_drawer_siblings, +#endif + NULL, +}; + static struct attribute *default_attrs[] = { &dev_attr_physical_package_id.attr, &dev_attr_die_id.attr, &dev_attr_core_id.attr, - &dev_attr_thread_siblings.attr, &dev_attr_thread_siblings_list.attr, - &dev_attr_core_cpus.attr, &dev_attr_core_cpus_list.attr, - &dev_attr_core_siblings.attr, &dev_attr_core_siblings_list.attr, - &dev_attr_die_cpus.attr, &dev_attr_die_cpus_list.attr, - &dev_attr_package_cpus.attr, &dev_attr_package_cpus_list.attr, #ifdef CONFIG_SCHED_BOOK &dev_attr_book_id.attr, - &dev_attr_book_siblings.attr, &dev_attr_book_siblings_list.attr, #endif #ifdef CONFIG_SCHED_DRAWER &dev_attr_drawer_id.attr, - &dev_attr_drawer_siblings.attr, &dev_attr_drawer_siblings_list.attr, #endif NULL @@ -114,6 +137,7 @@ static struct attribute *default_attrs[] = { static const struct attribute_group topology_attr_group = { .attrs = default_attrs, + .bin_attrs = bin_attrs, .name = "topology" }; -- 2.7.4

4 3

[PATCH RFC v4 0/3] Some optimization for lockless qdisc
by Yunsheng Lin 21 May '21

21 May '21

Patch 1: remove unnecessary seqcount operation. Patch 2: implement TCQ_F_CAN_BYPASS. Patch 3: remove qdisc->empty. RFC v4: Use STATE_MISSED and STATE_DRAINING to indicate non-empty qdisc, and add patch 1 and 3. Yunsheng Lin (3): net: sched: avoid unnecessary seqcount operation for lockless qdisc net: sched: implement TCQ_F_CAN_BYPASS for lockless qdisc net: sched: remove qdisc->empty for lockless qdisc include/net/sch_generic.h | 26 +++++++++++++------------- net/core/dev.c | 22 ++++++++++++++++++++-- net/sched/sch_generic.c | 23 ++++++++++++++++------- 3 files changed, 49 insertions(+), 22 deletions(-) -- 2.7.4

2 6

[PATCH] dma-iommu: Add a check to avoid dereference null pointer in function iommu_dma_map_sg()
by chenxiang 21 May '21

21 May '21

From: Xiang Chen <chenxiang66(a)hisilicon.com> The issue is reported by tool TscanCode, and it is possible to deference null pointer when prev is NULL which is the initial value. Signed-off-by: Xiang Chen <chenxiang66(a)hisilicon.com> --- drivers/iommu/dma-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c index 4cb63b2..88a4f34 100644 --- a/drivers/iommu/dma-iommu.c +++ b/drivers/iommu/dma-iommu.c @@ -1042,7 +1042,7 @@ static int iommu_dma_map_sg(struct device *dev, struct scatterlist *sg, * iova_len == 0, thus we cannot dereference prev the first * time through here (i.e. before it has a meaningful value). */ - if (pad_len && pad_len < s_length - 1) { + if (prev && pad_len && pad_len < s_length - 1) { prev->length += pad_len; iova_len += pad_len; } -- 2.8.1

3 2

Re: [PATCH 6/9] tty: hvc_console: Fix coding style issues of block comments
by Johan Hovold 21 May '21

21 May '21

On Mon, May 17, 2021 at 02:37:10PM +0800, Xiaofei Tan wrote: > Fix coding style issues of block comments, reported by checkpatch.pl. > Besides, add a period at the end of the sentenses. > > Signed-off-by: Xiaofei Tan <tanxiaofei(a)huawei.com> > --- > drivers/tty/hvc/hvc_console.c | 15 ++++++++++----- > 1 file changed, 10 insertions(+), 5 deletions(-) > > diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c > index 39018e5..a61cdf0 100644 > --- a/drivers/tty/hvc/hvc_console.c > +++ b/drivers/tty/hvc/hvc_console.c > @@ -177,7 +177,8 @@ static void hvc_console_print(struct console *co, const char *b, > r = cons_ops[index]->put_chars(vtermnos[index], c, i); > if (r <= 0) { > /* throw away characters on error > - * but spin in case of -EAGAIN */ > + * but spin in case of -EAGAIN. > + */ How is this an improvement? First, the multi-line comment style is /* * ... */ Second, that sentence is not capitalised so why do add a period? Third, why are you sending checkpatch.pl cleanups for files outside of staging? Unless doing some real changes to the files in question as well this is mostly just churn and noise that makes it harder to backport fixes and do code forensics for no real gain. Greg may disagree, but I don't think we should be encouraging this kind of patches. Johan

3 7

[PATCH v3] topology: use bin_attribute to avoid buff overflow
by Tian Tao 21 May '21

21 May '21

Use bin_attribute to display thread_siblings/core_cpus/core_siblings, die_cpus/package_cpus/book_siblings/drawer_siblings,avoiding NR_CPUS too big to cause buff overflow. This patch is based on the following discussion. https://www.spinics.net/lists/linux-doc/msg95921.html Signed-off-by: Tian Tao <tiantao6(a)hisilicon.com> --- v2: rewrite the function name##_read v3: remove the temp buffer. --- drivers/base/topology.c | 55 +++++++++++++++++++++++++++++++------------------ 1 file changed, 35 insertions(+), 20 deletions(-) diff --git a/drivers/base/topology.c b/drivers/base/topology.c index 4d254fc..87bddd0 100644 --- a/drivers/base/topology.c +++ b/drivers/base/topology.c @@ -21,11 +21,16 @@ static ssize_t name##_show(struct device *dev, \ return sysfs_emit(buf, "%d\n", topology_##name(dev->id)); \ } -#define define_siblings_show_map(name, mask) \ -static ssize_t name##_show(struct device *dev, \ - struct device_attribute *attr, char *buf) \ -{ \ - return cpumap_print_to_pagebuf(false, buf, topology_##mask(dev->id));\ +#define define_siblings_read(name, mask) \ +static ssize_t name##_read(struct file *file, struct kobject *kobj, \ + struct bin_attribute *attr, char *buf, \ + loff_t off, size_t count) \ +{ \ + struct device *dev = kobj_to_dev(kobj); \ + if (off != 0) \ + return 0; \ + return scnprintf(buf, count, "%*pb\n", nr_cpu_ids, \ + cpumask_bits(topology_##mask(dev->id))); \ } #define define_siblings_show_list(name, mask) \ @@ -37,7 +42,7 @@ static ssize_t name##_list_show(struct device *dev, \ } #define define_siblings_show_func(name, mask) \ - define_siblings_show_map(name, mask); \ + define_siblings_read(name, mask); \ define_siblings_show_list(name, mask) define_id_show_func(physical_package_id); @@ -50,30 +55,30 @@ define_id_show_func(core_id); static DEVICE_ATTR_RO(core_id); define_siblings_show_func(thread_siblings, sibling_cpumask); -static DEVICE_ATTR_RO(thread_siblings); +static BIN_ATTR_RO(thread_siblings, 0); static DEVICE_ATTR_RO(thread_siblings_list); define_siblings_show_func(core_cpus, sibling_cpumask); -static DEVICE_ATTR_RO(core_cpus); +static BIN_ATTR_RO(core_cpus, 0); static DEVICE_ATTR_RO(core_cpus_list); define_siblings_show_func(core_siblings, core_cpumask); -static DEVICE_ATTR_RO(core_siblings); +static BIN_ATTR_RO(core_siblings, 0); static DEVICE_ATTR_RO(core_siblings_list); define_siblings_show_func(die_cpus, die_cpumask); -static DEVICE_ATTR_RO(die_cpus); +static BIN_ATTR_RO(die_cpus, 0); static DEVICE_ATTR_RO(die_cpus_list); define_siblings_show_func(package_cpus, core_cpumask); -static DEVICE_ATTR_RO(package_cpus); +static BIN_ATTR_RO(package_cpus, 0); static DEVICE_ATTR_RO(package_cpus_list); #ifdef CONFIG_SCHED_BOOK define_id_show_func(book_id); static DEVICE_ATTR_RO(book_id); define_siblings_show_func(book_siblings, book_cpumask); -static DEVICE_ATTR_RO(book_siblings); +static BIN_ATTR_RO(book_siblings, 0); static DEVICE_ATTR_RO(book_siblings_list); #endif @@ -81,32 +86,41 @@ static DEVICE_ATTR_RO(book_siblings_list); define_id_show_func(drawer_id); static DEVICE_ATTR_RO(drawer_id); define_siblings_show_func(drawer_siblings, drawer_cpumask); -static DEVICE_ATTR_RO(drawer_siblings); +static BIN_ATTR_RO(drawer_siblings, 0; static DEVICE_ATTR_RO(drawer_siblings_list); #endif + +static struct bin_attribute *bin_attrs[] = { + &bin_attr_thread_siblings, + &bin_attr_core_cpus, + &bin_attr_core_siblings, + &bin_attr_die_cpus, + &bin_attr_package_cpus, +#ifdef CONFIG_SCHED_BOOK + &bin_attr_book_siblings, +#endif +#ifdef CONFIG_SCHED_DRAWER + &bin_attr_drawer_siblings, +#endif + NULL, +}; + static struct attribute *default_attrs[] = { &dev_attr_physical_package_id.attr, &dev_attr_die_id.attr, &dev_attr_core_id.attr, - &dev_attr_thread_siblings.attr, &dev_attr_thread_siblings_list.attr, - &dev_attr_core_cpus.attr, &dev_attr_core_cpus_list.attr, - &dev_attr_core_siblings.attr, &dev_attr_core_siblings_list.attr, - &dev_attr_die_cpus.attr, &dev_attr_die_cpus_list.attr, - &dev_attr_package_cpus.attr, &dev_attr_package_cpus_list.attr, #ifdef CONFIG_SCHED_BOOK &dev_attr_book_id.attr, - &dev_attr_book_siblings.attr, &dev_attr_book_siblings_list.attr, #endif #ifdef CONFIG_SCHED_DRAWER &dev_attr_drawer_id.attr, - &dev_attr_drawer_siblings.attr, &dev_attr_drawer_siblings_list.attr, #endif NULL @@ -114,6 +128,7 @@ static struct attribute *default_attrs[] = { static const struct attribute_group topology_attr_group = { .attrs = default_attrs, + .bin_attrs = bin_attrs, .name = "topology" }; -- 2.7.4

1 0

[PATCH RESEND] tty: hvc_console: Remove the repeated words 'no' and 'from'
by Xiaofei Tan 21 May '21

21 May '21

Remove the repeated words 'no' and 'from', reported by checkpatch.pl. Signed-off-by: Xiaofei Tan <tanxiaofei(a)huawei.com> --- drivers/tty/hvc/hvc_console.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index cdcc64e..bdd8d2b 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -292,7 +292,7 @@ int hvc_instantiate(uint32_t vtermno, int index, const struct hv_ops *ops) if (vtermnos[index] != -1) return -1; - /* make sure no no tty has been registered in this index */ + /* make sure no tty has been registered in this index */ hp = hvc_get_by_index(index); if (hp) { tty_port_put(&hp->port); @@ -620,7 +620,7 @@ static u32 timeout = MIN_TIMEOUT; /* * Maximum number of bytes to get from the console driver if hvc_poll is * called from driver (and can't sleep). Any more than this and we break - * and start polling with khvcd. This value was derived from from an OpenBMC + * and start polling with khvcd. This value was derived from an OpenBMC * console with the OPAL driver that results in about 0.25ms interrupts off * latency. */ -- 2.8.1

1 0

Re: [PATCH 0/9] tty: hvc_console: Fix some coding style issues
by Greg KH 21 May '21

21 May '21

On Mon, May 17, 2021 at 02:37:04PM +0800, Xiaofei Tan wrote: > Fix some issues reported by checkpatch.pl. All of them are > coding style issues, no function changes. > > Xiaofei Tan (9): > tty: hvc_console: Fix spaces required around that '=' > tty: hvc_console: Fix "foo * bar" should be "foo *bar" > tty: hvc_console: Remove trailing whitespace > tty: hvc_console: Fix issues of code indent should use tabs > tty: hvc_console: Delete spaces prohibited around open parenthesis '(' > and ')' > tty: hvc_console: Fix coding style issues of block comments > tty: hvc_console: Add a blank line after declarations > tty: hvc_console: Remove the repeated words 'no' and 'from' > tty: hvc_console: Move open brace { on the previous line > > drivers/tty/hvc/hvc_console.c | 37 ++++++++++++++++++++++--------------- > 1 file changed, 22 insertions(+), 15 deletions(-) Do you use this driver? If so, great, I'm sure there are other "real" issues in it that need some work. But as Johan points out, doing drive-by checkpatch cleanups on random files that you do not use, isn't the best thing to do. If you just want to do this type of work, please do so in drivers/staging/ as it is most welcome there if you wish to get involved in kernel work to get experience before doing "real" stuff. thanks, g reg k-h

2 1

[PATCH 0/5] Use pm_runtime_resume_and_get()
by Tian Tao 20 May '21

20 May '21

patch#1,#2,#3,#4,#5 use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle. This change is just to simplify the code, no actual functional changes. Tian Tao (5): spi: Use pm_runtime_resume_and_get() to replace open coding spi: spi-mem: Use pm_runtime_resume_and_get() to replace open coding spi: imx: Use pm_runtime_resume_and_get() to replace open coding spi: spi-ti-qspi: Use pm_runtime_resume_and_get() to replace open coding spi: sprd: Use pm_runtime_resume_and_get() to replace open coding drivers/spi/spi-imx.c | 6 ++---- drivers/spi/spi-mem.c | 3 +-- drivers/spi/spi-sprd.c | 3 +-- drivers/spi/spi-ti-qspi.c | 3 +-- drivers/spi/spi.c | 9 +++------ 5 files changed, 8 insertions(+), 16 deletions(-) -- 2.7.4

2 9

2024

2023

2022

2021

2020

Linuxarm