- Linuxarm - mailweb.openeuler.org

[PATCH V2 net-next 0/2] net: hns3: updates for -next
by Huazhong Tan 02 Feb '21

02 Feb '21

This patchset adds dump tm info of nodes, priority and qset in debugfs. Three debugfs files tm_nodes, tm_priority and tm_qset are created in new tm directory, and use cat command to dump their info, for examples: $ cat tm_nodes BASE_ID MAX_NUM PG 0 8 PRI 0 8 QSET 0 8 QUEUE 0 1024 $ cat tm_priority ID MODE DWRR C_IR_B C_IR_U C_IR_S C_BS_B C_BS_S C_FLAG C_RATE(Mbps) P_IR_B P_IR_U P_IR_S P_BS_B P_BS_S P_FLAG P_RATE(Mbps) 0000 dwrr 100 0 0 0 5 20 0 0 150 7 0 5 20 0 0 0001 sp 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0002 sp 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0003 sp 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0004 sp 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0005 sp 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0006 sp 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0007 sp 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $ cat tm_qset ID MAP_PRI LINK_VLD MODE DWRR 0000 0 1 dwrr 100 0001 0 0 sp 0 0002 0 0 sp 0 0003 0 0 sp 0 0004 0 0 sp 0 0005 0 0 sp 0 0006 0 0 sp 0 change log: V2: add readonly files for dump all nodes, priority and qset info suggested by Jakub Kicinski. previous version: V1: https://patchwork.kernel.org/project/netdevbpf/patch/1610694569-43099-1-git… Guangbin Huang (2): net: hns3: add interfaces to query information of tm priority/qset net: hns3: add debugfs support for tm nodes, priority and qset info drivers/net/ethernet/hisilicon/hns3/hnae3.h | 8 + drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 55 +++++- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 1 + .../ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c | 153 +++++++++++++++++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 + .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 2 + .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 186 +++++++++++++++++++++ .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h | 48 +++++- 8 files changed, 452 insertions(+), 2 deletions(-) -- 2.7.4

3 5

[PATCH 0/2] Add check of 4-byte when parsing SFDP 4bait table
by Yicong Yang 01 Feb '21

01 Feb '21

Add check of 4-byte address mode support when parsing SFDP 4bait. Some flash will provide a 4bait table and the spi-nor core will convert the address mode to 4-byte without checking whether it's actually supported or not by the controller. For example, the 16M s25fs128s1 provides the 4bait and will be convert to 4-byte address mode, which makes it unusable on hisi-sfc-v3xx on hip08 platform. Add the check before convert the address mode when parsing the 4bait will solve this issue. Yicong Yang (2): mtd: spi-nor: check 4-byte address support when parsing 4bait spi: hisi-sfc-v3xx: add address mode check drivers/mtd/spi-nor/sfdp.c | 48 +++++++++++++++++++++++++++++++++++++++++ drivers/spi/spi-hisi-sfc-v3xx.c | 25 ++++++++++++++++++++- 2 files changed, 72 insertions(+), 1 deletion(-) -- 2.8.1

3 5

[PATCH v2] iommu: Check dev->iommu in iommu_dev_xxx functions
by Shameer Kolothum 01 Feb '21

01 Feb '21

The device iommu probe/attach might have failed leaving dev->iommu to NULL and device drivers may still invoke these functions resulting in a crash in iommu vendor driver code. Hence make sure we check that. Also added iommu_ops to the "struct dev_iommu" and set it if the dev is successfully associated with an iommu. Fixes: a3a195929d40 ("iommu: Add APIs for multiple domains per device") Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi(a)huawei.com> --- v1 --> v2: -Added iommu_ops to struct dev_iommu based on the discussion with Robin. -Rebased against iommu-tree core branch. --- drivers/iommu/iommu.c | 19 +++++++------------ include/linux/iommu.h | 2 ++ 2 files changed, 9 insertions(+), 12 deletions(-) diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c index fd76e2f579fe..6023d0b7c542 100644 --- a/drivers/iommu/iommu.c +++ b/drivers/iommu/iommu.c @@ -217,6 +217,7 @@ static int __iommu_probe_device(struct device *dev, struct list_head *group_list } dev->iommu->iommu_dev = iommu_dev; + dev->iommu->ops = iommu_dev->ops; group = iommu_group_get_for_dev(dev); if (IS_ERR(group)) { @@ -2865,10 +2866,8 @@ EXPORT_SYMBOL_GPL(iommu_fwspec_add_ids); */ int iommu_dev_enable_feature(struct device *dev, enum iommu_dev_features feat) { - const struct iommu_ops *ops = dev->bus->iommu_ops; - - if (ops && ops->dev_enable_feat) - return ops->dev_enable_feat(dev, feat); + if (dev->iommu && dev->iommu->ops->dev_enable_feat) + return dev->iommu->ops->dev_enable_feat(dev, feat); return -ENODEV; } @@ -2881,10 +2880,8 @@ EXPORT_SYMBOL_GPL(iommu_dev_enable_feature); */ int iommu_dev_disable_feature(struct device *dev, enum iommu_dev_features feat) { - const struct iommu_ops *ops = dev->bus->iommu_ops; - - if (ops && ops->dev_disable_feat) - return ops->dev_disable_feat(dev, feat); + if (dev->iommu && dev->iommu->ops->dev_disable_feat) + return dev->iommu->ops->dev_disable_feat(dev, feat); return -EBUSY; } @@ -2892,10 +2889,8 @@ EXPORT_SYMBOL_GPL(iommu_dev_disable_feature); bool iommu_dev_feature_enabled(struct device *dev, enum iommu_dev_features feat) { - const struct iommu_ops *ops = dev->bus->iommu_ops; - - if (ops && ops->dev_feat_enabled) - return ops->dev_feat_enabled(dev, feat); + if (dev->iommu && dev->iommu->ops->dev_feat_enabled) + return dev->iommu->ops->dev_feat_enabled(dev, feat); return false; } diff --git a/include/linux/iommu.h b/include/linux/iommu.h index 524ffc2ff64f..ff0c76bdfb67 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -354,6 +354,7 @@ struct iommu_fault_param { * @fault_param: IOMMU detected device fault reporting data * @fwspec: IOMMU fwspec data * @iommu_dev: IOMMU device this device is linked to + * @ops: iommu-ops for talking to the iommu_dev * @priv: IOMMU Driver private data * * TODO: migrate other per device data pointers under iommu_dev_data, e.g. @@ -364,6 +365,7 @@ struct dev_iommu { struct iommu_fault_param *fault_param; struct iommu_fwspec *fwspec; struct iommu_device *iommu_dev; + const struct iommu_ops *ops; void *priv; }; -- 2.17.1

1 0

[PATCH v3 00/12] add IRQF_NO_AUTOEN for request_irq
by Barry Song 01 Feb '21

01 Feb '21

This patchset added IRQF_NO_AUTOEN for request_irq() and converted drivers/input to this new API. Other drivers will be handled afterwards. -v3: added examples with respect to Greg's comment Barry Song (12): genirq: add IRQF_NO_AUTOEN for request_irq Input: ar1021 - request_irq by IRQF_NO_AUTOEN and remove disable_irq Input: atmel_mxt_ts - request_irq by IRQF_NO_AUTOEN and remove disable_irq Input: melfas_mip4 - request_irq by IRQF_NO_AUTOEN and remove disable_irq Input: bu21029_ts - request_irq by IRQF_NO_AUTOEN and remove irq_set_status_flags Input: stmfts - request_irq by IRQF_NO_AUTOEN and remove irq_set_status_flags Input: zinitix - request_irq by IRQF_NO_AUTOEN and remove irq_set_status_flags Input: mms114 - request_irq by IRQF_NO_AUTOEN and remove disable_irq Input: wm831x-ts - request_irq by IRQF_NO_AUTOEN and remove disable_irq Input: cyttsp - request_irq by IRQF_NO_AUTOEN and remove disable_irq Input: tegra-kbc - request_irq by IRQF_NO_AUTOEN and remove disable_irq Input: tca6416-keypad - request_irq by IRQF_NO_AUTOEN and remove disable_irq drivers/input/keyboard/tca6416-keypad.c | 3 +-- drivers/input/keyboard/tegra-kbc.c | 5 ++--- drivers/input/touchscreen/ar1021_i2c.c | 5 +---- drivers/input/touchscreen/atmel_mxt_ts.c | 5 ++--- drivers/input/touchscreen/bu21029_ts.c | 4 ++-- drivers/input/touchscreen/cyttsp_core.c | 5 ++--- drivers/input/touchscreen/melfas_mip4.c | 5 ++--- drivers/input/touchscreen/mms114.c | 4 ++-- drivers/input/touchscreen/stmfts.c | 3 +-- drivers/input/touchscreen/wm831x-ts.c | 3 +-- drivers/input/touchscreen/zinitix.c | 4 ++-- include/linux/interrupt.h | 3 +++ kernel/irq/manage.c | 8 ++++++++ kernel/irq/settings.h | 10 ++++++++++ 14 files changed, 39 insertions(+), 28 deletions(-) -- 2.25.1

6 19

[GIT PULL v2] arm64: dts: hisilicon dts updates for v5.12
by Wei Xu 30 Jan '21

30 Jan '21

Hi ARM-SoC team, Please consider to pull the following changes. Thanks! Best Regards, Wei --- The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e: Linux 5.11-rc1 (2020-12-27 15:30:22 -0800) are available in the git repository at: git://github.com/hisilicon/linux-hisi.git tags/hisi-arm64-dt-for-5.12v2 for you to fetch changes up to b6e141eec86b730dfeddb888af7d3e0247530ef1: arm64: dts: hisilicon: hi3670.dtsi: add I2C settings (2021-01-29 16:40:07 +0800) ---------------------------------------------------------------- ARM64: DT: Hisilicon ARM64 DT updates for 5.12 - Further cleanups of the hisilicon DTS to align with the dtschema - Add or update the I2C, pinctrl and reset nodes for Hikey970 ---------------------------------------------------------------- Mauro Carvalho Chehab (3): arm64: dts: hisilicon: hi3670.dtsi: add iomcu_rst arm64: dts: hisilicon: hikey970-pinctrl.dtsi: add missing pinctrl settings arm64: dts: hisilicon: hi3670.dtsi: add I2C settings Zhen Lei (6): arm64: dts: hisilicon: separate each group of data in the property "ranges" arm64: dts: hisilicon: place clock-names "bus" before "core" arm64: dts: hisilicon: normalize the node name of the module thermal arm64: dts: hisilicon: normalize the node name of the localbus arm64: dts: hisilicon: avoid irrelevant nodes being mistakenly identified as PHY nodes arm64: dts: hisilicon: delete unused property smmu-cb-memtype arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 6 +- arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 77 +++ arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 8 +- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 8 +- .../arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi | 632 ++++++++++++++++++++- arch/arm64/boot/dts/hisilicon/hip05.dtsi | 2 +- arch/arm64/boot/dts/hisilicon/hip06.dtsi | 6 +- arch/arm64/boot/dts/hisilicon/hip07.dtsi | 9 +- 8 files changed, 714 insertions(+), 34 deletions(-)

2 1

question about bonding mode 4
by moyufeng 30 Jan '21

30 Jan '21

Hi Team, I have a question about bonding. During testing bonding mode 4 scenarios, I find that there is a very low probability that the pointer is null. The following information is displayed: [99359.795934] bond0: (slave eth13.2001): Port 2 did not find a suitable aggregator [99359.796960] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 [99359.798127] Mem abort info: [99359.798526] ESR = 0x96000004 [99359.798938] EC = 0x25: DABT (current EL), IL = 32 bits [99359.799673] SET = 0, FnV = 0 [99359.800106] EA = 0, S1PTW = 0 [99359.800554] Data abort info: [99359.800952] ISV = 0, ISS = 0x00000004 [99359.801522] CM = 0, WnR = 0 [99359.801970] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000c64e6000 [99359.802876] [0000000000000020] pgd=0000000000000000 [99359.803555] Internal error: Oops: 96000004 [#1] PREEMPT SMP [99359.804369] Modules linked in: bonding hns3(-) hclgevf hnae3 [last unloaded: bonding] [99359.805494] CPU: 1 PID: 951 Comm: kworker/u10:2 Not tainted 5.7.0-rc4+ #1 [99359.806455] Hardware name: linux,dummy-virt (DT) [99359.807107] Workqueue: bond0 bond_3ad_state_machine_handler [bonding] [99359.808056] pstate: 60c00005 (nZCv daif +PAN +UAO) [99359.808722] pc : bond_3ad_state_machine_handler+0x7fc/0xdb8 [bonding] [99359.809652] lr : bond_3ad_state_machine_handler+0x7f4/0xdb8 [bonding] [99359.810535] sp : ffff80001882bd20 [99359.811012] x29: ffff80001882bd20 x28: ffff000085939a38 [99359.811791] x27: ffff00008649bb68 x26: 00000000aaaaaaab [99359.812871] x25: ffff800009401000 x24: ffff800009408de4 [99359.814049] x23: ffff80001882bd98 x22: ffff00008649b880 [99359.815210] x21: 0000000000000000 x20: ffff000085939a00 [99359.816401] x19: ffff00008649b880 x18: ffff800012572988 [99359.817637] x17: 0000000000000000 x16: 0000000000000000 [99359.818870] x15: ffff80009882b987 x14: 726f746167657267 [99359.820090] x13: 676120656c626174 x12: 697573206120646e [99359.821374] x11: 696620746f6e2064 x10: 696420322074726f [99359.822659] x9 : 50203a2931303032 x8 : 0000000000081391 [99359.823891] x7 : ffff8000108e3ad0 x6 : ffff8000128858bb [99359.825109] x5 : 0000000000000000 x4 : 0000000000000000 [99359.826262] x3 : 00000000ffffffff x2 : 906b329bb5362a00 [99359.827394] x1 : 906b329bb5362a00 x0 : 0000000000000000 [99359.828540] Call trace: [99359.829071] bond_3ad_state_machine_handler+0x7fc/0xdb8 [bonding] [99359.830367] process_one_work+0x15c/0x4a0 [99359.831216] worker_thread+0x50/0x478 [99359.832022] kthread+0x130/0x160 [99359.832716] ret_from_fork+0x10/0x18 [99359.833487] Code: 910c0021 95f704bb f9403f80 b5ffe300 (f9401000) [99359.834742] ---[ end trace c7a8e02914afc4e0 ]--- [99359.835817] Kernel panic - not syncing: Fatal exception in interrupt [99359.837334] SMP: stopping secondary CPUs [99359.838277] Kernel Offset: disabled [99359.839086] CPU features: 0x080002,22208218 [99359.840053] Memory Limit: none [99359.840783] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- The test procedure is as follows: 1. Configure bonding and set it to mode 4. echo "4" > /sys/class/net/bond0/bonding/mode ifconfig bond0 up 2. Configure two VLANs and add them to the bonding in step 1. vconfig add eth0 2001 vconfig add eth1 2001 ifenslave bond0 eth0.2001 eth1.2001 3. Unload the network device driver and bonding driver. rmmod hns3 rmmod hclge rmmod hnae3 rmmod bonding.ko 4. Repeat the preceding steps for a long time. By checking the logic in ad_port_selection_logic(), I find that if enter the branch "Port %d did not find a suitable aggregator", the value of port->aggregator will be NULL, causing the problem. So I'd like to ask what circumstances will be involved in this branch, and what should be done in this case? The detailed code analysis is as follows: static void ad_port_selection_logic(struct port *port, bool *update_slave_arr) { [...] /* if the port is connected to other aggregator, detach it */ if (port->aggregator) { /* detach the port from its former aggregator */ temp_aggregator = port->aggregator; for (curr_port = temp_aggregator->lag_ports; curr_port; last_port = curr_port, curr_port = curr_port->next_port_in_aggregator) { if (curr_port == port) { temp_aggregator->num_of_ports--; /* if it is the first port attached to the * aggregator */ if (!last_port) { temp_aggregator->lag_ports = port->next_port_in_aggregator; } else { /* not the first port attached to the * aggregator */ last_port->next_port_in_aggregator = port->next_port_in_aggregator; } /* clear the port's relations to this * aggregator */ port->aggregator = NULL; ----analysis: set port->aggregator NULL at the beginning of ad_port_selection_logic(). port->next_port_in_aggregator = NULL; port->actor_port_aggregator_identifier = 0; slave_dbg(bond->dev, port->slave->dev, "Port %d left LAG %d\n", port->actor_port_number, temp_aggregator->aggregator_identifier); /* if the aggregator is empty, clear its * parameters, and set it ready to be attached */ if (!temp_aggregator->lag_ports) ad_clear_agg(temp_aggregator); break; } } if (!curr_port) { /* meaning: the port was related to an aggregator * but was not on the aggregator port list */ net_warn_ratelimited("%s: (slave %s): Warning: Port %d was related to aggregator %d but was not on its port list\n", port->slave->bond->dev->name, port->slave->dev->name, port->actor_port_number, port->aggregator->aggregator_identifier); } } /* search on all aggregators for a suitable aggregator for this port */ bond_for_each_slave(bond, slave, iter) { aggregator = &(SLAVE_AD_INFO(slave)->aggregator); /* keep a free aggregator for later use(if needed) */ if (!aggregator->lag_ports) { if (!free_aggregator) free_aggregator = aggregator; ----analysis: Save free_aggregator if found a free aggregator. But in this case, no free aggregator is available. continue; } /* check if current aggregator suits us */ if (((aggregator->actor_oper_aggregator_key == port->actor_oper_port_key) && /* if all parameters match AND */ MAC_ADDRESS_EQUAL(&(aggregator->partner_system), &(port->partner_oper.system)) && (aggregator->partner_system_priority == port->partner_oper.system_priority) && (aggregator->partner_oper_aggregator_key == port->partner_oper.key) ) && ((!MAC_ADDRESS_EQUAL(&(port->partner_oper.system), &(null_mac_addr)) && /* partner answers */ !aggregator->is_individual) /* but is not individual OR */ ) ) { /* attach to the founded aggregator */ port->aggregator = aggregator; ----analysis: If a proper aggregator is found, port->aggregator is assigned here. port->actor_port_aggregator_identifier = port->aggregator->aggregator_identifier; port->next_port_in_aggregator = aggregator->lag_ports; port->aggregator->num_of_ports++; aggregator->lag_ports = port; slave_dbg(bond->dev, slave->dev, "Port %d joined LAG %d (existing LAG)\n", port->actor_port_number, port->aggregator->aggregator_identifier); /* mark this port as selected */ port->sm_vars |= AD_PORT_SELECTED; found = 1; ----analysis: Set found to 1 if port->aggregator is assigned. break; } } /* the port couldn't find an aggregator - attach it to a new * aggregator */ if (!found) { if (free_aggregator) { /* assign port a new aggregator */ port->aggregator = free_aggregator; ----analysis: No proper free_aggregator is found. Therefore, port->aggregator cannot be assigned here. port->actor_port_aggregator_identifier = port->aggregator->aggregator_identifier; /* update the new aggregator's parameters * if port was responsed from the end-user */ if (port->actor_oper_port_key & AD_DUPLEX_KEY_MASKS) /* if port is full duplex */ port->aggregator->is_individual = false; else port->aggregator->is_individual = true; port->aggregator->actor_admin_aggregator_key = port->actor_admin_port_key; port->aggregator->actor_oper_aggregator_key = port->actor_oper_port_key; port->aggregator->partner_system = port->partner_oper.system; port->aggregator->partner_system_priority = port->partner_oper.system_priority; port->aggregator->partner_oper_aggregator_key = port->partner_oper.key; port->aggregator->receive_state = 1; port->aggregator->transmit_state = 1; port->aggregator->lag_ports = port; port->aggregator->num_of_ports++; /* mark this port as selected */ port->sm_vars |= AD_PORT_SELECTED; slave_dbg(bond->dev, port->slave->dev, "Port %d joined LAG %d (new LAG)\n", port->actor_port_number, port->aggregator->aggregator_identifier); } else { slave_err(bond->dev, port->slave->dev, "Port %d did not find a suitable aggregator\n", port->actor_port_number); ----analysis: The fault scenario goes to this branch, and port->aggregator remains NULL. } } /* if all aggregator's ports are READY_N == TRUE, set ready=TRUE * in all aggregator's ports, else set ready=FALSE in all * aggregator's ports */ __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator)); ----analysis: port->aggregator is still NULL, which causes problem. aggregator = __get_first_agg(port); ad_agg_selection_logic(aggregator, update_slave_arr); if (!port->aggregator->is_active) port->actor_oper_port_state &= ~LACP_STATE_SYNCHRONIZATION; } Thanks.

2 3

[PATCH for-next] RDMA/hns: Add support of direct wqe
by Weihang Li 30 Jan '21

30 Jan '21

From: Yixing Liu <liuyixing1(a)huawei.com> Direct wqe is a mechanism to fill wqe directly into the hardware. In the case of light load, the wqe will be filled into pcie bar space of the hardware, this will reduce one memory access operation and therefore reduce the latency. Signed-off-by: Yixing Liu <liuyixing1(a)huawei.com> Signed-off-by: Lang Cheng <chenglang(a)huawei.com> Signed-off-by: Weihang Li <liweihang(a)huawei.com> --- drivers/infiniband/hw/hns/hns_roce_device.h | 6 ++++ drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 44 ++++++++++++++++++++++++++++- drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 14 +++++++++ 3 files changed, 63 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_device.h b/drivers/infiniband/hw/hns/hns_roce_device.h index c46b330..6abf7d8 100644 --- a/drivers/infiniband/hw/hns/hns_roce_device.h +++ b/drivers/infiniband/hw/hns/hns_roce_device.h @@ -90,6 +90,7 @@ #define HNS_ROCE_MAX_PORTS 6 #define HNS_ROCE_GID_SIZE 16 #define HNS_ROCE_SGE_SIZE 16 +#define HNS_ROCE_DWQE_SIZE 65536 #define HNS_ROCE_HOP_NUM_0 0xff @@ -644,6 +645,10 @@ struct hns_roce_work { u32 queue_num; }; +enum { + HNS_ROCE_QP_CAP_DIRECT_WQE = BIT(5), +}; + struct hns_roce_qp { struct ib_qp ibqp; struct hns_roce_wq rq; @@ -986,6 +991,7 @@ struct hns_roce_dev { struct mutex pgdir_mutex; int irq[HNS_ROCE_MAX_IRQ_NUM]; u8 __iomem *reg_base; + void __iomem *mem_base; struct hns_roce_caps caps; struct xarray qp_table_xa; diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index 4c06889..0d26079 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -503,6 +503,8 @@ static inline int set_ud_wqe(struct hns_roce_qp *qp, if (ret) return ret; + qp->sl = to_hr_ah(ud_wr(wr)->ah)->av.sl; + set_extend_sge(qp, wr->sg_list, &curr_idx, valid_num_sge); /* @@ -635,6 +637,8 @@ static inline void update_sq_db(struct hns_roce_dev *hr_dev, V2_DB_BYTE_4_TAG_S, qp->doorbell_qpn); roce_set_field(sq_db.byte_4, V2_DB_BYTE_4_CMD_M, V2_DB_BYTE_4_CMD_S, HNS_ROCE_V2_SQ_DB); + /* indicates data on new BAR, 0 : SQ doorbell, 1 : DWQE */ + roce_set_bit(sq_db.byte_4, V2_DB_FLAG_S, 0); roce_set_field(sq_db.parameter, V2_DB_PARAMETER_IDX_M, V2_DB_PARAMETER_IDX_S, qp->sq.head); roce_set_field(sq_db.parameter, V2_DB_PARAMETER_SL_M, @@ -644,6 +648,38 @@ static inline void update_sq_db(struct hns_roce_dev *hr_dev, } } +static void hns_roce_write512(struct hns_roce_dev *hr_dev, u64 *val, + u64 __iomem *dest) +{ +#define HNS_ROCE_WRITE_TIMES 8 + struct hns_roce_v2_priv *priv = (struct hns_roce_v2_priv *)hr_dev->priv; + struct hnae3_handle *handle = priv->handle; + const struct hnae3_ae_ops *ops = handle->ae_algo->ops; + int i; + + if (!hr_dev->dis_db && !ops->get_hw_reset_stat(handle)) + for (i = 0; i < HNS_ROCE_WRITE_TIMES; i++) + writeq_relaxed(*(val + i), dest + i); +} + +static void write_dwqe(struct hns_roce_dev *hr_dev, struct hns_roce_qp *qp, + void *wqe) +{ + struct hns_roce_v2_rc_send_wqe *rc_sq_wqe = wqe; + + /* All kinds of DirectWQE have the same header field layout */ + roce_set_bit(rc_sq_wqe->byte_4, V2_RC_SEND_WQE_BYTE_4_FLAG_S, 1); + roce_set_field(rc_sq_wqe->byte_4, V2_RC_SEND_WQE_BYTE_4_DB_SL_L_M, + V2_RC_SEND_WQE_BYTE_4_DB_SL_L_S, qp->sl); + roce_set_field(rc_sq_wqe->byte_4, V2_RC_SEND_WQE_BYTE_4_DB_SL_H_M, + V2_RC_SEND_WQE_BYTE_4_DB_SL_H_S, qp->sl >> 2); + roce_set_field(rc_sq_wqe->byte_4, V2_RC_SEND_WQE_BYTE_4_WQE_INDEX_M, + V2_RC_SEND_WQE_BYTE_4_WQE_INDEX_S, qp->sq.head); + + hns_roce_write512(hr_dev, wqe, hr_dev->mem_base + + HNS_ROCE_DWQE_SIZE * qp->ibqp.qp_num); +} + static int hns_roce_v2_post_send(struct ib_qp *ibqp, const struct ib_send_wr *wr, const struct ib_send_wr **bad_wr) @@ -710,7 +746,12 @@ static int hns_roce_v2_post_send(struct ib_qp *ibqp, qp->next_sge = sge_idx; /* Memory barrier */ wmb(); - update_sq_db(hr_dev, qp); + + if (nreq == 1 && qp->sq.head == qp->sq.tail + 1 && + (qp->en_flags & HNS_ROCE_QP_CAP_DIRECT_WQE)) + write_dwqe(hr_dev, qp, wqe); + else + update_sq_db(hr_dev, qp); } spin_unlock_irqrestore(&qp->sq.lock, flags); @@ -6286,6 +6327,7 @@ static void hns_roce_hw_v2_get_cfg(struct hns_roce_dev *hr_dev, /* Get info from NIC driver. */ hr_dev->reg_base = handle->rinfo.roce_io_base; + hr_dev->mem_base = handle->rinfo.roce_mem_base; hr_dev->caps.num_ports = 1; hr_dev->iboe.netdevs[0] = handle->rinfo.netdev; hr_dev->iboe.phy_port[0] = 0; diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.h b/drivers/infiniband/hw/hns/hns_roce_hw_v2.h index bdaccf8..badc1c9 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.h +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.h @@ -97,6 +97,7 @@ #define HNS_ROCE_V2_PAGE_SIZE_SUPPORTED 0xFFFFF000 #define HNS_ROCE_V2_MAX_INNER_MTPT_NUM 2 #define HNS_ROCE_INVALID_LKEY 0x100 + #define HNS_ROCE_CMQ_TX_TIMEOUT 30000 #define HNS_ROCE_V2_UC_RC_SGE_NUM_IN_WQE 2 #define HNS_ROCE_V2_RSV_QPS 8 @@ -1059,6 +1060,8 @@ struct hns_roce_v2_mpt_entry { #define V2_DB_BYTE_4_CMD_S 24 #define V2_DB_BYTE_4_CMD_M GENMASK(27, 24) +#define V2_DB_FLAG_S 31 + #define V2_DB_PARAMETER_IDX_S 0 #define V2_DB_PARAMETER_IDX_M GENMASK(15, 0) @@ -1155,6 +1158,15 @@ struct hns_roce_v2_rc_send_wqe { #define V2_RC_SEND_WQE_BYTE_4_OPCODE_S 0 #define V2_RC_SEND_WQE_BYTE_4_OPCODE_M GENMASK(4, 0) +#define V2_RC_SEND_WQE_BYTE_4_DB_SL_L_S 5 +#define V2_RC_SEND_WQE_BYTE_4_DB_SL_L_M GENMASK(6, 5) + +#define V2_RC_SEND_WQE_BYTE_4_DB_SL_H_S 13 +#define V2_RC_SEND_WQE_BYTE_4_DB_SL_H_M GENMASK(14, 13) + +#define V2_RC_SEND_WQE_BYTE_4_WQE_INDEX_S 15 +#define V2_RC_SEND_WQE_BYTE_4_WQE_INDEX_M GENMASK(30, 15) + #define V2_RC_SEND_WQE_BYTE_4_OWNER_S 7 #define V2_RC_SEND_WQE_BYTE_4_CQE_S 8 @@ -1177,6 +1189,8 @@ struct hns_roce_v2_rc_send_wqe { #define V2_RC_FRMR_WQE_BYTE_4_LW_S 23 +#define V2_RC_SEND_WQE_BYTE_4_FLAG_S 31 + #define V2_RC_SEND_WQE_BYTE_16_XRC_SRQN_S 0 #define V2_RC_SEND_WQE_BYTE_16_XRC_SRQN_M GENMASK(23, 0) -- 2.8.1

2 1

[PATCH 0/5] hisi_sas: More misc patches
by John Garry 30 Jan '21

30 Jan '21

This is a collection of misc patches picked up during the latest dev cycle, targeted at 5.12 . Features include: - Some tidy-up from after recent change to expose HW queues on v2 HW - Add trace FIFO DFX debugfs support - Flush wq for driver removal - Add ability to enable debugfs support as a kernel config option Thanks! John Garry (2): scsi: hisi_sas: Remove deferred probe check in hisi_sas_v2_probe() scsi: hisi_sas: Don't check .nr_hw_queues in hisi_sas_task_prep() Luo Jiaxing (3): scsi: hisi_sas: Enable debugfs support by default scsi: hisi_sas: Flush workqueue in hisi_sas_v3_remove() scsi: hisi_sas: Add trace FIFO debugfs support drivers/scsi/hisi_sas/Kconfig | 6 + drivers/scsi/hisi_sas/hisi_sas.h | 15 ++ drivers/scsi/hisi_sas/hisi_sas_main.c | 19 +- drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 12 -- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 252 +++++++++++++++++++++++++ 5 files changed, 286 insertions(+), 18 deletions(-) -- 2.26.2

2 7

Question about the mechanism of RoCEv2 VLAN validation
by liweihang 29 Jan '21

29 Jan '21

Hi All, I'm confusing at the VLAN validation mechanism of RoCEv2. Assuming that we have two nodes with an HCA that supports RoCE v2. And we add a VLAN (id = 1) on each nodes, but they are of different network segments. The IP and VLAN configuration are as follows: NODE_A NODE_B +--------+---------------+------+ +--------+---------------+------+ | device | IP | VLAN | | device | IP | VLAN | +--------+---------------+------+ +--------+---------------+------+ | eth0 | 192.168.97.1 | 0 | /----| eth0 | 192.168.100.2 | 0 | +--------+---------------+------+ / +--------+---------------+------+ | eth0.1 | 192.168.100.3 | 1 |---/ | eth0.1 | 192.168.98.2 | 1 | +--------+---------------+------+ +--------+---------------+------+ Now I try to ping eth0 on NODE_B from eth0.1 on NODE_A, of cource it fails becauce these devices are using different VLAN ID. Then I do some tests on RoCE, the first one is a simple RC send test: NODE_A: ib_send_bw -d mlx5_0 -x 5 (the sgid 5 belongs to eth0.1) NODE_B: ib_send_bw -d mlx5_0 -x 3 <server ip> (the sgid 3 belongs to eth0) The result is as expected, the RoCEv2 packet with unmatched VLAN ID was dropped. I think the reason is that for RC service, the VLAN information of a QP is recorded in QPC, and the HCA can check it when receiving a packet. But when I run a simple UD send test: NODE_A: ib_send_bw -d mlx5_0 -x 5 -c UD (the sgid 5 belongs to eth0.1) NODE_B: ib_send_bw -d mlx5_0 -x 3 -c UD <server ip> (the sgid 3 belongs to eth0) The test ends without error successfully. So the question is, RoCEv2 is based on Ethernet, shouldn't a RoCEv2 node check the VLAN ID of every incoming packets? UD is connectionless-oriented, an UD QP won't record VLAN info in it's QPC, so how to achieve the checking mechanism? Or a UD QP should just ignore the unmatched VLAN ID? I didn't find any info from the IB specification, I'd appreciate it if someone could help explain it. Thanks Weihang

2 2

[RFC PATCH v2] sched/topology: fix the issue groups don't span domain->span for NUMA diameter > 2
by Barry Song 29 Jan '21

29 Jan '21

As long as NUMA diameter > 2, building sched_domain by sibling's child domain will definitely create a sched_domain with sched_group which will span out of the sched_domain +------+ +------+ +-------+ +------+ | node | 12 |node | 20 | node | 12 |node | | 0 +---------+1 +--------+ 2 +-------+3 | +------+ +------+ +-------+ +------+ domain0 node0 node1 node2 node3 domain1 node0+1 node0+1 node2+3 node2+3 + domain2 node0+1+2 | group: node0+1 | group:node2+3 <-------------------+ when node2 is added into the domain2 of node0, kernel is using the child domain of node2's domain2, which is domain1(node2+3). Node 3 is outside the span of the domain including node0+1+2. This will make load_balance() and select_task_rq_fair() run on wrong CPU and base on avg load. here we move to use the *child* domain of the *child* domain of node2's domain2 to build the sched_group. +------+ +------+ +-------+ +------+ | node | 12 |node | 20 | node | 12 |node | | 0 +---------+1 +--------+ 2 +-------+3 | +------+ +------+ +-------+ +------+ domain0 node0 node1 +- node2 node3 | domain1 node0+1 node0+1 | node2+3 node2+3 | domain2 node0+1+2 | group: node0+1 | group:node2 <-------------------+ A tricky thing is that we shouldn't use the first cpu of node2 as the unique ID for the sched_group generated by grandchild, otherwise, when this cpu becomes the balance_cpu of another sched_group of cpus other than node0, our sched_group generated by grandchild will have same ID with another sched_group generated by child in init_overlap_sched_group(): build_balance_mask(sd, sg, mask); cpu = cpumask_first_and(sched_group_span(sg), mask); sg->sgc = *per_cpu_ptr(sdd->sgc, cpu); So here we move to use the second cpu. But we can put the cpu back during load_balance by using sched_group_span rather than group_balance_mask. For the corner case, if NUMA has only one CPU, we will get to a warning WARN_ON_ONCE here: static void init_overlap_sched_group(struct sched_domain *sd, struct sched_group *sg) { if (atomic_inc_return(&sg->sgc->ref) == 1) cpumask_copy(group_balance_mask(sg), mask); else WARN_ON_ONCE(!cpumask_equal(group_balance_mask(sg), mask)); } But It is pretty much not a real case. Tested by the below topology: qemu-system-aarch64 -M virt -nographic \ -smp cpus=8 \ -numa node,cpus=0-1,nodeid=0 \ -numa node,cpus=2-3,nodeid=1 \ -numa node,cpus=4-5,nodeid=2 \ -numa node,cpus=6-7,nodeid=3 \ -numa dist,src=0,dst=1,val=12 \ -numa dist,src=0,dst=2,val=20 \ -numa dist,src=0,dst=3,val=22 \ -numa dist,src=1,dst=2,val=22 \ -numa dist,src=2,dst=3,val=12 \ -numa dist,src=1,dst=3,val=24 \ -m 4G -cpu cortex-a57 -kernel arch/arm64/boot/Image w/o patch, we get lots of "groups don't span domain->span": [ 0.802139] CPU0 attaching sched-domain(s): [ 0.802193] domain-0: span=0-1 level=MC [ 0.802443] groups: 0:{ span=0 cap=1013 }, 1:{ span=1 cap=979 } [ 0.802693] domain-1: span=0-3 level=NUMA [ 0.802731] groups: 0:{ span=0-1 cap=1992 }, 2:{ span=2-3 cap=1943 } [ 0.802811] domain-2: span=0-5 level=NUMA [ 0.802829] groups: 0:{ span=0-3 cap=3935 }, 4:{ span=4-7 cap=3937 } [ 0.802881] ERROR: groups don't span domain->span [ 0.803058] domain-3: span=0-7 level=NUMA [ 0.803080] groups: 0:{ span=0-5 mask=0-1 cap=5843 }, 6:{ span=4-7 mask=6-7 cap=4077 } [ 0.804055] CPU1 attaching sched-domain(s): [ 0.804072] domain-0: span=0-1 level=MC [ 0.804096] groups: 1:{ span=1 cap=979 }, 0:{ span=0 cap=1013 } [ 0.804152] domain-1: span=0-3 level=NUMA [ 0.804170] groups: 0:{ span=0-1 cap=1992 }, 2:{ span=2-3 cap=1943 } [ 0.804219] domain-2: span=0-5 level=NUMA [ 0.804236] groups: 0:{ span=0-3 cap=3935 }, 4:{ span=4-7 cap=3937 } [ 0.804302] ERROR: groups don't span domain->span [ 0.804520] domain-3: span=0-7 level=NUMA [ 0.804546] groups: 0:{ span=0-5 mask=0-1 cap=5843 }, 6:{ span=4-7 mask=6-7 cap=4077 } [ 0.804677] CPU2 attaching sched-domain(s): [ 0.804687] domain-0: span=2-3 level=MC [ 0.804705] groups: 2:{ span=2 cap=934 }, 3:{ span=3 cap=1009 } [ 0.804754] domain-1: span=0-3 level=NUMA [ 0.804772] groups: 2:{ span=2-3 cap=1943 }, 0:{ span=0-1 cap=1992 } [ 0.804820] domain-2: span=0-5 level=NUMA [ 0.804836] groups: 2:{ span=0-3 mask=2-3 cap=3991 }, 4:{ span=0-1,4-7 mask=4-5 cap=5985 } [ 0.804944] ERROR: groups don't span domain->span [ 0.805108] domain-3: span=0-7 level=NUMA [ 0.805134] groups: 2:{ span=0-5 mask=2-3 cap=5899 }, 6:{ span=0-1,4-7 mask=6-7 cap=6125 } [ 0.805223] CPU3 attaching sched-domain(s): [ 0.805232] domain-0: span=2-3 level=MC [ 0.805249] groups: 3:{ span=3 cap=1009 }, 2:{ span=2 cap=934 } [ 0.805319] domain-1: span=0-3 level=NUMA [ 0.805336] groups: 2:{ span=2-3 cap=1943 }, 0:{ span=0-1 cap=1992 } [ 0.805383] domain-2: span=0-5 level=NUMA [ 0.805399] groups: 2:{ span=0-3 mask=2-3 cap=3991 }, 4:{ span=0-1,4-7 mask=4-5 cap=5985 } [ 0.805458] ERROR: groups don't span domain->span [ 0.805605] domain-3: span=0-7 level=NUMA [ 0.805626] groups: 2:{ span=0-5 mask=2-3 cap=5899 }, 6:{ span=0-1,4-7 mask=6-7 cap=6125 } [ 0.805712] CPU4 attaching sched-domain(s): [ 0.805721] domain-0: span=4-5 level=MC [ 0.805738] groups: 4:{ span=4 cap=984 }, 5:{ span=5 cap=924 } [ 0.805787] domain-1: span=4-7 level=NUMA [ 0.805803] groups: 4:{ span=4-5 cap=1908 }, 6:{ span=6-7 cap=2029 } [ 0.805851] domain-2: span=0-1,4-7 level=NUMA [ 0.805867] groups: 4:{ span=4-7 cap=3937 }, 0:{ span=0-3 cap=3935 } [ 0.805915] ERROR: groups don't span domain->span [ 0.806108] domain-3: span=0-7 level=NUMA [ 0.806130] groups: 4:{ span=0-1,4-7 mask=4-5 cap=5985 }, 2:{ span=0-3 mask=2-3 cap=3991 } [ 0.806214] CPU5 attaching sched-domain(s): [ 0.806222] domain-0: span=4-5 level=MC [ 0.806240] groups: 5:{ span=5 cap=924 }, 4:{ span=4 cap=984 } [ 0.806841] domain-1: span=4-7 level=NUMA [ 0.806866] groups: 4:{ span=4-5 cap=1908 }, 6:{ span=6-7 cap=2029 } [ 0.806934] domain-2: span=0-1,4-7 level=NUMA [ 0.806953] groups: 4:{ span=4-7 cap=3937 }, 0:{ span=0-3 cap=3935 } [ 0.807004] ERROR: groups don't span domain->span [ 0.807312] domain-3: span=0-7 level=NUMA [ 0.807386] groups: 4:{ span=0-1,4-7 mask=4-5 cap=5985 }, 2:{ span=0-3 mask=2-3 cap=3991 } [ 0.807686] CPU6 attaching sched-domain(s): [ 0.807710] domain-0: span=6-7 level=MC [ 0.807750] groups: 6:{ span=6 cap=1017 }, 7:{ span=7 cap=1012 } [ 0.807840] domain-1: span=4-7 level=NUMA [ 0.807870] groups: 6:{ span=6-7 cap=2029 }, 4:{ span=4-5 cap=1908 } [ 0.807952] domain-2: span=0-1,4-7 level=NUMA [ 0.807985] groups: 6:{ span=4-7 mask=6-7 cap=4077 }, 0:{ span=0-5 mask=0-1 cap=5843 } [ 0.808045] ERROR: groups don't span domain->span [ 0.808257] domain-3: span=0-7 level=NUMA [ 0.808571] groups: 6:{ span=0-1,4-7 mask=6-7 cap=6125 }, 2:{ span=0-5 mask=2-3 cap=5899 } [ 0.808848] CPU7 attaching sched-domain(s): [ 0.808860] domain-0: span=6-7 level=MC [ 0.808880] groups: 7:{ span=7 cap=1012 }, 6:{ span=6 cap=1017 } [ 0.808953] domain-1: span=4-7 level=NUMA [ 0.808974] groups: 6:{ span=6-7 cap=2029 }, 4:{ span=4-5 cap=1908 } [ 0.809034] domain-2: span=0-1,4-7 level=NUMA [ 0.809055] groups: 6:{ span=4-7 mask=6-7 cap=4077 }, 0:{ span=0-5 mask=0-1 cap=5843 } [ 0.809128] ERROR: groups don't span domain->span [ 0.810361] domain-3: span=0-7 level=NUMA [ 0.810400] groups: 6:{ span=0-1,4-7 mask=6-7 cap=5961 }, 2:{ span=0-5 mask=2-3 cap=5903 } w/ patch, we get no "groups don't span domain->span": [ 0.868907] CPU0 attaching sched-domain(s): [ 0.868962] domain-0: span=0-1 level=MC [ 0.869179] groups: 0:{ span=0 cap=1013 }, 1:{ span=1 cap=983 } [ 0.869405] domain-1: span=0-3 level=NUMA [ 0.869438] groups: 0:{ span=0-1 cap=1996 }, 2:{ span=2-3 cap=2006 } [ 0.869542] domain-2: span=0-5 level=NUMA [ 0.869559] groups: 0:{ span=0-3 cap=4002 }, 5:{ span=4-5 cap=2048 } [ 0.869603] domain-3: span=0-7 level=NUMA [ 0.869618] groups: 0:{ span=0-5 mask=0-1 cap=5980 }, 6:{ span=4-7 mask=6-7 cap=4016 } [ 0.870303] CPU1 attaching sched-domain(s): [ 0.870314] domain-0: span=0-1 level=MC [ 0.870334] groups: 1:{ span=1 cap=983 }, 0:{ span=0 cap=1013 } [ 0.870381] domain-1: span=0-3 level=NUMA [ 0.870396] groups: 0:{ span=0-1 cap=1996 }, 2:{ span=2-3 cap=2006 } [ 0.870440] domain-2: span=0-5 level=NUMA [ 0.870454] groups: 0:{ span=0-3 cap=4002 }, 5:{ span=4-5 cap=2048 } [ 0.870507] domain-3: span=0-7 level=NUMA [ 0.870530] groups: 0:{ span=0-5 mask=0-1 cap=5980 }, 6:{ span=4-7 mask=6-7 cap=4016 } [ 0.870611] CPU2 attaching sched-domain(s): [ 0.870619] domain-0: span=2-3 level=MC [ 0.870634] groups: 2:{ span=2 cap=1007 }, 3:{ span=3 cap=999 } [ 0.870677] domain-1: span=0-3 level=NUMA [ 0.870691] groups: 2:{ span=2-3 cap=2006 }, 0:{ span=0-1 cap=1996 } [ 0.870734] domain-2: span=0-5 level=NUMA [ 0.870748] groups: 2:{ span=0-3 mask=2-3 cap=4054 }, 5:{ span=4-5 cap=2048 } [ 0.870795] domain-3: span=0-7 level=NUMA [ 0.870809] groups: 2:{ span=0-5 mask=2-3 cap=6032 }, 6:{ span=0-1,4-7 mask=6-7 cap=6064 } [ 0.870913] CPU3 attaching sched-domain(s): [ 0.870921] domain-0: span=2-3 level=MC [ 0.870936] groups: 3:{ span=3 cap=999 }, 2:{ span=2 cap=1007 } [ 0.870979] domain-1: span=0-3 level=NUMA [ 0.870993] groups: 2:{ span=2-3 cap=2006 }, 0:{ span=0-1 cap=1996 } [ 0.871035] domain-2: span=0-5 level=NUMA [ 0.871049] groups: 2:{ span=0-3 mask=2-3 cap=4054 }, 5:{ span=4-5 cap=2048 } [ 0.871096] domain-3: span=0-7 level=NUMA [ 0.871110] groups: 2:{ span=0-5 mask=2-3 cap=6032 }, 6:{ span=0-1,4-7 mask=6-7 cap=6064 } [ 0.871177] CPU4 attaching sched-domain(s): [ 0.871185] domain-0: span=4-5 level=MC [ 0.871200] groups: 4:{ span=4 cap=977 }, 5:{ span=5 cap=1001 } [ 0.871243] domain-1: span=4-7 level=NUMA [ 0.871257] groups: 4:{ span=4-5 cap=1978 }, 6:{ span=6-7 cap=1968 } [ 0.871300] domain-2: span=0-1,4-7 level=NUMA [ 0.871314] groups: 4:{ span=4-7 cap=3946 }, 1:{ span=0-1 cap=2048 } [ 0.871356] domain-3: span=0-7 level=NUMA [ 0.871370] groups: 4:{ span=0-1,4-7 mask=4-5 cap=5994 }, 2:{ span=0-3 mask=2-3 cap=4054 } [ 0.871436] CPU5 attaching sched-domain(s): [ 0.871443] domain-0: span=4-5 level=MC [ 0.871457] groups: 5:{ span=5 cap=1001 }, 4:{ span=4 cap=977 } [ 0.871512] domain-1: span=4-7 level=NUMA [ 0.871893] groups: 4:{ span=4-5 cap=1978 }, 6:{ span=6-7 cap=1968 } [ 0.871949] domain-2: span=0-1,4-7 level=NUMA [ 0.871966] groups: 4:{ span=4-7 cap=3946 }, 1:{ span=0-1 cap=2048 } [ 0.872010] domain-3: span=0-7 level=NUMA [ 0.872025] groups: 4:{ span=0-1,4-7 mask=4-5 cap=5994 }, 2:{ span=0-3 mask=2-3 cap=4054 } [ 0.872115] CPU6 attaching sched-domain(s): [ 0.872123] domain-0: span=6-7 level=MC [ 0.872139] groups: 6:{ span=6 cap=993 }, 7:{ span=7 cap=975 } [ 0.872186] domain-1: span=4-7 level=NUMA [ 0.872202] groups: 6:{ span=6-7 cap=1968 }, 4:{ span=4-5 cap=1978 } [ 0.872246] domain-2: span=0-1,4-7 level=NUMA [ 0.872260] groups: 6:{ span=4-7 mask=6-7 cap=4016 }, 1:{ span=0-1 cap=2048 } [ 0.872309] domain-3: span=0-7 level=NUMA [ 0.872323] groups: 6:{ span=0-1,4-7 mask=6-7 cap=6064 }, 2:{ span=0-5 mask=2-3 cap=6032 } [ 0.872392] CPU7 attaching sched-domain(s): [ 0.872399] domain-0: span=6-7 level=MC [ 0.872414] groups: 7:{ span=7 cap=975 }, 6:{ span=6 cap=993 } [ 0.872458] domain-1: span=4-7 level=NUMA [ 0.872472] groups: 6:{ span=6-7 cap=1968 }, 4:{ span=4-5 cap=1978 } [ 0.872662] domain-2: span=0-1,4-7 level=NUMA [ 0.872685] groups: 6:{ span=4-7 mask=6-7 cap=4016 }, 1:{ span=0-1 cap=2048 } [ 0.872737] domain-3: span=0-7 level=NUMA [ 0.872752] groups: 6:{ span=0-1,4-7 mask=6-7 cap=6064 }, 2:{ span=0-5 mask=2-3 cap=6032 } Reported-by: Valentin Schneider <valentin.schneider(a)arm.com> Cc: Meelis Roos <mroos(a)linux.ee> Signed-off-by: Barry Song <song.bao.hua(a)hisilicon.com> --- -v2: fix the span of sched_group rather than hacking the load balance to compensate the topology problem(thanks for the comments of Vincent and Valentin) v1 link: https://lore.kernel.org/lkml/20210115203632.34396-1-song.bao.hua@hisilicon.… kernel/sched/fair.c | 9 ++++- kernel/sched/sched.h | 1 + kernel/sched/topology.c | 84 ++++++++++++++++++++++++++--------------- 3 files changed, 63 insertions(+), 31 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index f183dba4961e..3ce815045793 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -9538,6 +9538,7 @@ static int should_we_balance(struct lb_env *env) { struct sched_group *sg = env->sd->groups; int cpu; + struct cpumask *mask; /* * Ensure the balancing environment is consistent; can happen @@ -9553,8 +9554,14 @@ static int should_we_balance(struct lb_env *env) if (env->idle == CPU_NEWLY_IDLE) return 1; + /* + * in build_balance_mask(), we removed the first cpu from the + * balance_mask of the sched_group generated by grandchild; + * the first cpu should be able to pull task if it is idle. + */ + mask = sg->from_grandchild ? sched_group_span(sg) : group_balance_mask(sg); /* Try to find first idle CPU */ - for_each_cpu_and(cpu, group_balance_mask(sg), env->cpus) { + for_each_cpu_and(cpu, mask, env->cpus) { if (!idle_cpu(cpu)) continue; diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h index 12ada79d40f3..3ad282fdc5b1 100644 --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -1508,6 +1508,7 @@ struct sched_group { unsigned int group_weight; struct sched_group_capacity *sgc; int asym_prefer_cpu; /* CPU of highest priority in group */ + int from_grandchild; /* this sched_group comes from grandchild */ /* * The CPUs this group covers. diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c index 5d3675c7a76b..23099f6dc034 100644 --- a/kernel/sched/topology.c +++ b/kernel/sched/topology.c @@ -93,7 +93,7 @@ static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level, group->sgc->id, cpumask_pr_args(sched_group_span(group))); - if ((sd->flags & SD_OVERLAP) && + if ((sd->flags & SD_OVERLAP) && !group->from_grandchild && !cpumask_equal(group_balance_mask(group), sched_group_span(group))) { printk(KERN_CONT " mask=%*pbl", cpumask_pr_args(group_balance_mask(group))); @@ -723,35 +723,6 @@ cpu_attach_domain(struct sched_domain *sd, struct root_domain *rd, int cpu) for (tmp = sd; tmp; tmp = tmp->parent) numa_distance += !!(tmp->flags & SD_NUMA); - /* - * FIXME: Diameter >=3 is misrepresented. - * - * Smallest diameter=3 topology is: - * - * node 0 1 2 3 - * 0: 10 20 30 40 - * 1: 20 10 20 30 - * 2: 30 20 10 20 - * 3: 40 30 20 10 - * - * 0 --- 1 --- 2 --- 3 - * - * NUMA-3 0-3 N/A N/A 0-3 - * groups: {0-2},{1-3} {1-3},{0-2} - * - * NUMA-2 0-2 0-3 0-3 1-3 - * groups: {0-1},{1-3} {0-2},{2-3} {1-3},{0-1} {2-3},{0-2} - * - * NUMA-1 0-1 0-2 1-3 2-3 - * groups: {0},{1} {1},{2},{0} {2},{3},{1} {3},{2} - * - * NUMA-0 0 1 2 3 - * - * The NUMA-2 groups for nodes 0 and 3 are obviously buggered, as the - * group span isn't a subset of the domain span. - */ - WARN_ONCE(numa_distance > 2, "Shortest NUMA path spans too many nodes\n"); - sched_domain_debug(sd, cpu); rq_attach_root(rq, rd); @@ -906,6 +877,7 @@ build_balance_mask(struct sched_domain *sd, struct sched_group *sg, struct cpuma cpumask_clear(mask); for_each_cpu(i, sg_span) { + int from_grandchild = 0; sibling = *per_cpu_ptr(sdd->sd, i); /* @@ -916,10 +888,27 @@ build_balance_mask(struct sched_domain *sd, struct sched_group *sg, struct cpuma if (!sibling->child) continue; + while (sibling->child && + !cpumask_subset(sched_domain_span(sibling->child), + sched_domain_span(sd))) { + sibling = sibling->child; + from_grandchild = 1; + } + /* If we would not end up here, we can't continue from here */ if (!cpumask_equal(sg_span, sched_domain_span(sibling->child))) continue; + sg->from_grandchild = from_grandchild; + /* + * use cpu other than the first one as the unique ID of this group + * otherwise, the ID will conflict with another sched_group coming + * from child rather than grandchild + */ + if (from_grandchild && i == cpumask_first(sg_span) && + cpumask_weight(sg_span) > 1) + continue; + cpumask_set_cpu(i, mask); } @@ -1015,6 +1004,41 @@ build_overlap_sched_groups(struct sched_domain *sd, int cpu) if (!cpumask_test_cpu(i, sched_domain_span(sibling))) continue; + /* + * for NUMA diameter >= 3, building sched_domain by sibling's + * child's child domain to prevent sched_group from spanning + * out of sched_domain + * if we don't do this, Diameter >=3 is misrepresented: + * + * Smallest diameter=3 topology is: + * + * node 0 1 2 3 + * 0: 10 20 30 40 + * 1: 20 10 20 30 + * 2: 30 20 10 20 + * 3: 40 30 20 10 + * + * 0 --- 1 --- 2 --- 3 + * + * NUMA-3 0-3 N/A N/A 0-3 + * groups: {0-2},{1-3} {1-3},{0-2} + * + * NUMA-2 0-2 0-3 0-3 1-3 + * groups: {0-1},{1-3} {0-2},{2-3} {1-3},{0-1} {2-3},{0-2} + * + * NUMA-1 0-1 0-2 1-3 2-3 + * groups: {0},{1} {1},{2},{0} {2},{3},{1} {3},{2} + * + * NUMA-0 0 1 2 3 + * + * The NUMA-2 groups for nodes 0 and 3 are obviously buggered, as the + * group span isn't a subset of the domain span. + */ + while (sibling->child && + !cpumask_subset(sched_domain_span(sibling->child), + span)) + sibling = sibling->child; + sg = build_group_from_child_sched_domain(sibling, cpu); if (!sg) goto fail; -- 2.25.1

2 1

2024

2023

2022

2021

2020

Linuxarm