Use netdev_feature_xxx helpers to replace the logical operation for netdev features.
Signed-off-by: Jian Shen shenjian15@huawei.com --- drivers/net/ethernet/davicom/dm9000.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index e842de6..cf34956 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -586,14 +586,17 @@ static int dm9000_set_features(struct net_device *dev, netdev_features_t features) { struct board_info *dm = to_dm9000_board(dev); - netdev_features_t changed = dev->features ^ features; + netdev_features_t changed; unsigned long flags;
- if (!(changed & NETIF_F_RXCSUM)) + netdev_feature_xor(&changed, dev->features, features); + if (!netdev_feature_test_bit(NETIF_F_RXCSUM_BIT, changed)) return 0;
spin_lock_irqsave(&dm->lock, flags); - iow(dm, DM9000_RCSR, (features & NETIF_F_RXCSUM) ? RCSR_CSUM : 0); + iow(dm, DM9000_RCSR, + netdev_feature_test_bit(NETIF_F_RXCSUM_BIT, features) ? + RCSR_CSUM : 0); spin_unlock_irqrestore(&dm->lock, flags);
return 0; @@ -911,9 +914,10 @@ dm9000_init_dm9000(struct net_device *dev) db->io_mode = ior(db, DM9000_ISR) >> 6; /* ISR bit7:6 keeps I/O mode */
/* Checksum mode */ - if (dev->hw_features & NETIF_F_RXCSUM) + if (netdev_feature_test_bit(NETIF_F_RXCSUM_BIT, dev->hw_features)) iow(db, DM9000_RCSR, - (dev->features & NETIF_F_RXCSUM) ? RCSR_CSUM : 0); + netdev_feature_test_bit(NETIF_F_RXCSUM_BIT, + dev->features) ? RCSR_CSUM : 0);
iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */ iow(db, DM9000_GPR, 0); @@ -1169,7 +1173,8 @@ dm9000_rx(struct net_device *dev)
/* Pass to upper layer */ skb->protocol = eth_type_trans(skb, dev); - if (dev->features & NETIF_F_RXCSUM) { + if (netdev_feature_test_bit(NETIF_F_RXCSUM_BIT, + dev->features)) { if ((((rxbyte & 0x1c) << 3) & rxbyte) == 0) skb->ip_summed = CHECKSUM_UNNECESSARY; else @@ -1643,8 +1648,11 @@ dm9000_probe(struct platform_device *pdev)
/* dm9000a/b are capable of hardware checksum offload */ if (db->type == TYPE_DM9000A || db->type == TYPE_DM9000B) { - ndev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM; - ndev->features |= ndev->hw_features; + netdev_feature_zero(&ndev->hw_features); + netdev_feature_set_bits(NETIF_F_RXCSUM | NETIF_F_IP_CSUM, + &ndev->hw_features); + netdev_feature_or(&ndev->features, ndev->features, + ndev->hw_features); }
/* from this point we assume that we have found a DM9000 */