Currently, there many drivers who support CQE mode configuration, some configure it as a fixed when initialized, some provide an interface to change it by ethtool private flags. In order make it more generic, add two new 'ETHTOOL_A_COALESCE_USE_CQE_TX' and 'ETHTOOL_A_COALESCE_USE_CQE_RX' coalesce attributes, then these parameters can be accessed by ethtool netlink coalesce uAPI.
Signed-off-by: Yufeng Mo moyufeng@huawei.com Signed-off-by: Huazhong Tan tanhuazhong@huawei.com --- Documentation/networking/ethtool-netlink.rst | 8 ++++++++ include/linux/ethtool.h | 6 +++++- include/uapi/linux/ethtool_netlink.h | 2 ++ 3 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index c86628e..af963cf 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -939,6 +939,10 @@ Kernel response contents: ``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx ``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval + ``ETHTOOL_A_COALESCE_USE_CQE_TX`` bool with timer reset on + packet arrival, Tx + ``ETHTOOL_A_COALESCE_USE_CQE_RX`` bool with timer reset on + packet arrival, Rx =========================================== ====== =======================
Attributes are only included in reply if their value is not zero or the @@ -977,6 +981,10 @@ Request contents: ``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx ``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval + ``ETHTOOL_A_COALESCE_USE_CQE_TX`` bool with timer reset on + packet arrival, Tx + ``ETHTOOL_A_COALESCE_USE_CQE_RX`` bool with timer reset on + packet arrival, Rx =========================================== ====== =======================
Request is rejected if it attributes declared as unsupported by driver (i.e. diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 4711b96..bad4c7a 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -211,7 +211,9 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32, #define ETHTOOL_COALESCE_TX_USECS_HIGH BIT(19) #define ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH BIT(20) #define ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL BIT(21) -#define ETHTOOL_COALESCE_ALL_PARAMS GENMASK(21, 0) +#define ETHTOOL_COALESCE_USE_CQE_RX BIT(22) +#define ETHTOOL_COALESCE_USE_CQE_TX BIT(23) +#define ETHTOOL_COALESCE_ALL_PARAMS GENMASK(23, 0)
#define ETHTOOL_COALESCE_USECS \ (ETHTOOL_COALESCE_RX_USECS | ETHTOOL_COALESCE_TX_USECS) @@ -237,6 +239,8 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32, ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_RX_USECS_HIGH | \ ETHTOOL_COALESCE_PKT_RATE_LOW | ETHTOOL_COALESCE_PKT_RATE_HIGH | \ ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL) +#define ETHTOOL_COALESCE_USE_CQE \ + (ETHTOOL_COALESCE_USE_CQE_RX | ETHTOOL_COALESCE_USE_CQE_TX)
#define ETHTOOL_STAT_NOT_SET (~0ULL)
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h index b3b9371..5545f1c 100644 --- a/include/uapi/linux/ethtool_netlink.h +++ b/include/uapi/linux/ethtool_netlink.h @@ -377,6 +377,8 @@ enum { ETHTOOL_A_COALESCE_TX_USECS_HIGH, /* u32 */ ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH, /* u32 */ ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL, /* u32 */ + ETHTOOL_A_COALESCE_USE_CQE_MODE_TX, /* u8 */ + ETHTOOL_A_COALESCE_USE_CQE_MODE_RX, /* u8 */
/* add new constants above here */ __ETHTOOL_A_COALESCE_CNT,