From: Chengchang Tang tangchengchang@huawei.com
After MTU changed, the buffer used to store packets in HW should be reallocated. And buffer size is allocated based on the maximum frame size in the PF struct. However, the value of maximum frame size is not updated in time when MTU is changed. This would lead to a packet loss for not enough buffer.
This patch update the maximum frame size before reallocating the HW buffer. And a rollback operation is added to avoid the side effects of buffer reallocation failures.
Fixes: 1f5ca0b460cd ("net/hns3: support some device operations") Fixes: d51867db65c1 ("net/hns3: add initialization") Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang tangchengchang@huawei.com Signed-off-by: Lijun Ou oulijun@huawei.com --- drivers/net/hns3/hns3_ethdev.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-)
diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c index b3fd331..21c3c59 100644 --- a/drivers/net/hns3/hns3_ethdev.c +++ b/drivers/net/hns3/hns3_ethdev.c @@ -2460,17 +2460,33 @@ hns3_set_mac_mtu(struct hns3_hw *hw, uint16_t new_mps) static int hns3_config_mtu(struct hns3_hw *hw, uint16_t mps) { + struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw); + uint16_t original_mps = hns->pf.mps; + int err; int ret;
ret = hns3_set_mac_mtu(hw, mps); if (ret) { - hns3_err(hw, "Failed to set mtu, ret = %d", ret); + hns3_err(hw, "failed to set mtu, ret = %d", ret); return ret; }
+ hns->pf.mps = mps; ret = hns3_buffer_alloc(hw); - if (ret) - hns3_err(hw, "Failed to allocate buffer, ret = %d", ret); + if (ret) { + hns3_err(hw, "failed to allocate buffer, ret = %d", ret); + goto rollback; + } + + return 0; + +rollback: + err = hns3_set_mac_mtu(hw, original_mps); + if (err) { + hns3_err(hw, "fail to rollback MTU, err = %d", err); + return ret; + } + hns->pf.mps = original_mps;
return ret; } @@ -2505,7 +2521,7 @@ hns3_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) dev->data->port_id, mtu, ret); return ret; } - hns->pf.mps = (uint16_t)frame_size; + if (is_jumbo_frame) dev->data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;