Fix some coding style issues reported by checkpatch.pl, including following types:
WARNING: Block comments use * on subsequent lines WARNING: Block comments use a trailing */ on a separate line ERROR: code indent should use tabs where possible WARNING: Missing a blank line after declarations ERROR: spaces required around that '?' (ctx:WxV) WARNING: Block comments should align the * on each line
Signed-off-by: Xiaofei Tan tanxiaofei@huawei.com --- drivers/acpi/battery.c | 64 ++++++++++++++++++++++++++++++-------------------- 1 file changed, 38 insertions(+), 26 deletions(-)
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index b822f77..a0d8ead 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -74,16 +74,17 @@ enum { ACPI_BATTERY_XINFO_PRESENT, ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, /* On Lenovo Thinkpad models from 2010 and 2011, the power unit - switches between mWh and mAh depending on whether the system - is running on battery or not. When mAh is the unit, most - reported values are incorrect and need to be adjusted by - 10000/design_voltage. Verified on x201, t410, t410s, and x220. - Pre-2010 and 2012 models appear to always report in mWh and - are thus unaffected (tested with t42, t61, t500, x200, x300, - and x230). Also, in mid-2012 Lenovo issued a BIOS update for - the 2011 models that fixes the issue (tested on x220 with a - post-1.29 BIOS), but as of Nov. 2012, no such update is - available for the 2010 models. */ + * switches between mWh and mAh depending on whether the system + * is running on battery or not. When mAh is the unit, most + * reported values are incorrect and need to be adjusted by + * 10000/design_voltage. Verified on x201, t410, t410s, and x220. + * Pre-2010 and 2012 models appear to always report in mWh and + * are thus unaffected (tested with t42, t61, t500, x200, x300, + * and x230). Also, in mid-2012 Lenovo issued a BIOS update for + * the 2011 models that fixes the issue (tested on x220 with a + * post-1.29 BIOS), but as of Nov. 2012, no such update is + * available for the 2010 models. + */ ACPI_BATTERY_QUIRK_THINKPAD_MAH, /* for batteries reporting current capacity with design capacity * on a full charge, but showing degradation in full charge cap. @@ -372,8 +373,9 @@ static enum power_supply_property energy_battery_full_cap_broken_props[] = { };
/* -------------------------------------------------------------------------- - Battery Management - -------------------------------------------------------------------------- */ + * Battery Management + * -------------------------------------------------------------------------- + */ struct acpi_offsets { size_t offset; /* offset inside struct acpi_sbs_battery */ u8 mode; /* int or string? */ @@ -431,6 +433,7 @@ static int extract_package(struct acpi_battery *battery, { int i; union acpi_object *element; + if (package->type != ACPI_TYPE_PACKAGE) return -EFAULT; for (i = 0; i < num; ++i) { @@ -439,6 +442,7 @@ static int extract_package(struct acpi_battery *battery, element = &package->package.elements[i]; if (offsets[i].mode) { u8 *ptr = (u8 *)battery + offsets[i].offset; + if (element->type == ACPI_TYPE_STRING || element->type == ACPI_TYPE_BUFFER) strncpy(ptr, element->string.pointer, 32); @@ -497,10 +501,12 @@ static int extract_battery_info(const int use_bix, battery->design_capacity_warning * 10000 / battery->design_voltage; /* Curiously, design_capacity_low, unlike the rest of them, - is correct. */ + * is correct. + */ /* capacity_granularity_* equal 1 on the systems tested, so - it's impossible to tell if they would need an adjustment - or not if their values were higher. */ + * it's impossible to tell if they would need an adjustment + * or not if their values were higher. + */ } if (test_bit(ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, &battery->flags) && battery->capacity_now > battery->full_charge_capacity) @@ -532,8 +538,8 @@ static int acpi_battery_get_info(struct acpi_battery *battery) if (ACPI_FAILURE(status)) { acpi_handle_info(battery->device->handle, "%s evaluation failed: %s\n", - use_bix ?"_BIX":"_BIF", - acpi_format_exception(status)); + use_bix ? "_BIX":"_BIF", + acpi_format_exception(status)); } else { result = extract_battery_info(use_bix, battery, @@ -648,6 +654,7 @@ static ssize_t acpi_battery_alarm_show(struct device *dev, char *buf) { struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev)); + return sprintf(buf, "%d\n", battery->alarm * 1000); }
@@ -657,6 +664,7 @@ static ssize_t acpi_battery_alarm_store(struct device *dev, { unsigned long x; struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev)); + if (sscanf(buf, "%lu\n", &x) == 1) battery->alarm = x/1000; if (acpi_battery_present(battery)) @@ -743,7 +751,7 @@ EXPORT_SYMBOL_GPL(battery_hook_register); * This function gets called right after the battery sysfs * attributes have been added, so that the drivers that * define custom sysfs attributes can add their own. -*/ + */ static void battery_hook_add_battery(struct acpi_battery *battery) { struct acpi_battery_hook *hook_node, *tmp; @@ -872,10 +880,12 @@ static void find_battery(const struct dmi_header *dm, void *private) { struct acpi_battery *battery = (struct acpi_battery *)private; /* Note: the hardcoded offsets below have been extracted from - the source code of dmidecode. */ + * the source code of dmidecode. + */ if (dm->type == DMI_ENTRY_PORTABLE_BATTERY && dm->length >= 8) { const u8 *dmi_data = (const u8 *)(dm + 1); int dmi_capacity = get_unaligned((const u16 *)(dmi_data + 6)); + if (dm->length >= 18) dmi_capacity *= dmi_data[17]; if (battery->design_capacity * battery->design_voltage / 1000 @@ -917,6 +927,7 @@ static void acpi_battery_quirks(struct acpi_battery *battery)
if (battery->power_unit && dmi_name_in_vendors("LENOVO")) { const char *s; + s = dmi_get_system_info(DMI_PRODUCT_VERSION); if (s && !strncasecmp(s, "ThinkPad", 8)) { dmi_walk(find_battery, battery); @@ -1014,8 +1025,9 @@ static void acpi_battery_refresh(struct acpi_battery *battery) }
/* -------------------------------------------------------------------------- - Driver Interface - -------------------------------------------------------------------------- */ + * Driver Interface + * -------------------------------------------------------------------------- + */
static void acpi_battery_notify(struct acpi_device *device, u32 event) { @@ -1026,11 +1038,11 @@ static void acpi_battery_notify(struct acpi_device *device, u32 event) return; old = battery->bat; /* - * On Acer Aspire V5-573G notifications are sometimes triggered too - * early. For example, when AC is unplugged and notification is - * triggered, battery state is still reported as "Full", and changes to - * "Discharging" only after short delay, without any notification. - */ + * On Acer Aspire V5-573G notifications are sometimes triggered too + * early. For example, when AC is unplugged and notification is + * triggered, battery state is still reported as "Full", and changes to + * "Discharging" only after short delay, without any notification. + */ if (battery_notification_delay_ms > 0) msleep(battery_notification_delay_ms); if (event == ACPI_BATTERY_NOTIFY_INFO)