The driver sets the LPI bitmap of device based on get_count_order(nvecs). This means that when the number of LPI interrupts does not meet the power of two, redundant bits are set in the LPI bitmap. However, when free interrupt, these redundant bits is not cleared. As a result, device will fails to allocate the same numbers of interrupts next time.
Therefore, clear the redundant bits set in LPI bitmap.
Fixes: 4615fbc3788d ("genirq/irqdomain: Don't try to free an interrupt that has no mapping")
Signed-off-by: Luo Jiaxing luojiaxing@huawei.com --- drivers/irqchip/irq-gic-v3-its.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index ed46e60..027f7ef 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -3435,6 +3435,10 @@ static int its_alloc_device_irq(struct its_device *dev, int nvecs, irq_hw_number
*hwirq = dev->event_map.lpi_base + idx;
+ bitmap_clear(dev->event_map.lpi_map, + idx + nvecs, + roundup_pow_of_two(nvecs) - nvecs); + return 0; }