-----Original Message----- From: Robin Murphy [mailto:robin.murphy@arm.com] Sent: Friday, February 5, 2021 12:51 PM To: Song Bao Hua (Barry Song) song.bao.hua@hisilicon.com; m.szyprowski@samsung.com; hch@lst.de; iommu@lists.linux-foundation.org Cc: linux-kernel@vger.kernel.org; linuxarm@openeuler.org Subject: Re: [PATCH] dma-mapping: benchmark: pretend DMA is transmitting
On 2021-02-04 22:58, Barry Song wrote:
In a real dma mapping user case, after dma_map is done, data will be transmit. Thus, in multi-threaded user scenario, IOMMU contention should not be that severe. For example, if users enable multiple threads to send network packets through 1G/10G/100Gbps NIC, usually the steps will be: map -> transmission -> unmap. Transmission delay reduces the contention of IOMMU. Here a delay is added to simulate the transmission for TX case so that the tested result could be more accurate.
RX case would be much more tricky. It is not supported yet.
I guess it might be a reasonable approximation to map several pages, then unmap them again after a slightly more random delay. Or maybe divide the threads into pairs of mappers and unmappers respectively filling up and draining proper little buffer pools.
Yes. Good suggestions. I am actually thinking about how to support cases like networks. There is a pre-mapped list of pages, each page is bound with some hardware DMA block descriptor(BD). So if Linux can consume the packets in time, those buffers are always re-used. Only when the page bound with BD is full and OS can't consume it in time, another temp page will be allocated and mapped, BD will switch to use this temp page, then finally unmap it if it is not needed any more. On the other hand, the pre-mapped pages are never unmapped.
For things like filesystem and disk driver, RX is always requested by users. The model would be simpler: map -> rx -> unmap. For networks, RX transmission can come spontaneously.
Anyway, I'll put this into TBD. For this moment, mainly handle TX path. Or maybe the current code has been able to handle simple RX model :-)
Signed-off-by: Barry Song song.bao.hua@hisilicon.com
kernel/dma/map_benchmark.c | 11 +++++++++++ tools/testing/selftests/dma/dma_map_benchmark.c | 17 +++++++++++++++-- 2 files changed, 26 insertions(+), 2 deletions(-)
diff --git a/kernel/dma/map_benchmark.c b/kernel/dma/map_benchmark.c index 1b1b8ff875cb..1976db7e34e4 100644 --- a/kernel/dma/map_benchmark.c +++ b/kernel/dma/map_benchmark.c @@ -21,6 +21,7 @@ #define DMA_MAP_BENCHMARK _IOWR('d', 1, struct map_benchmark) #define DMA_MAP_MAX_THREADS 1024 #define DMA_MAP_MAX_SECONDS 300 +#define DMA_MAP_MAX_TRANS_DELAY (10 * 1000 * 1000) /* 10ms */
Using MSEC_PER_SEC might be sufficiently self-documenting?
Yes, I guess you mean NSEC_PER_MSEC. will move to it.
#define DMA_MAP_BIDIRECTIONAL 0 #define DMA_MAP_TO_DEVICE 1 @@ -36,6 +37,7 @@ struct map_benchmark { __s32 node; /* which numa node this benchmark will run on */ __u32 dma_bits; /* DMA addressing capability */ __u32 dma_dir; /* DMA data direction */
- __u32 dma_trans_ns; /* time for DMA transmission in ns */ __u64 expansion[10]; /* For future use */ };
@@ -87,6 +89,10 @@ static int map_benchmark_thread(void *data) map_etime = ktime_get(); map_delta = ktime_sub(map_etime, map_stime);
/* Pretend DMA is transmitting */if (map->dir != DMA_FROM_DEVICE)ndelay(map->bparam.dma_trans_ns);TBH I think the option of a fixed delay between map and unmap might be a handy thing in general, so having the direction check at all seems needlessly restrictive. As long as the driver implements all the basic building blocks, combining them to simulate specific traffic patterns can be left up to the benchmark tool.
Sensible, will remove the condition check.
Robin.
- unmap_stime = ktime_get(); dma_unmap_single(map->dev, dma_addr, PAGE_SIZE, map->dir); unmap_etime = ktime_get();
@@ -218,6 +224,11 @@ static long map_benchmark_ioctl(struct file *file,
unsigned int cmd,
return -EINVAL; }
if (map->bparam.dma_trans_ns > DMA_MAP_MAX_TRANS_DELAY) {pr_err("invalid transmission delay\n");return -EINVAL;}- if (map->bparam.node != NUMA_NO_NODE && !node_possible(map->bparam.node)) { pr_err("invalid numa node\n");
diff --git a/tools/testing/selftests/dma/dma_map_benchmark.c
b/tools/testing/selftests/dma/dma_map_benchmark.c
index 7065163a8388..dbf426e2fb7f 100644 --- a/tools/testing/selftests/dma/dma_map_benchmark.c +++ b/tools/testing/selftests/dma/dma_map_benchmark.c @@ -14,6 +14,7 @@ #define DMA_MAP_BENCHMARK _IOWR('d', 1, struct map_benchmark) #define DMA_MAP_MAX_THREADS 1024 #define DMA_MAP_MAX_SECONDS 300 +#define DMA_MAP_MAX_TRANS_DELAY (10 * 1000 * 1000) /* 10ms */
#define DMA_MAP_BIDIRECTIONAL 0 #define DMA_MAP_TO_DEVICE 1 @@ -35,6 +36,7 @@ struct map_benchmark { __s32 node; /* which numa node this benchmark will run on */ __u32 dma_bits; /* DMA addressing capability */ __u32 dma_dir; /* DMA data direction */
- __u32 dma_trans_ns; /* delay for DMA transmission in ns */ __u64 expansion[10]; /* For future use */ };
@@ -45,12 +47,12 @@ int main(int argc, char **argv) /* default single thread, run 20 seconds on NUMA_NO_NODE */ int threads = 1, seconds = 20, node = -1; /* default dma mask 32bit, bidirectional DMA */
- int bits = 32, dir = DMA_MAP_BIDIRECTIONAL;
int bits = 32, xdelay = 0, dir = DMA_MAP_BIDIRECTIONAL;
int cmd = DMA_MAP_BENCHMARK; char *p;
- while ((opt = getopt(argc, argv, "t:s:n:b:d:")) != -1) {
- while ((opt = getopt(argc, argv, "t:s:n:b:d:x:")) != -1) { switch (opt) { case 't': threads = atoi(optarg);
@@ -67,6 +69,9 @@ int main(int argc, char **argv) case 'd': dir = atoi(optarg); break;
case 'x':xdelay = atoi(optarg);break;@@ -84,6 +89,12 @@ int main(int argc, char **argv) exit(1); }
- if (xdelay < 0 || xdelay > DMA_MAP_MAX_TRANS_DELAY) {
fprintf(stderr, "invalid transmit delay, must be in 0-%d\n",DMA_MAP_MAX_TRANS_DELAY);exit(1);- }
- /* suppose the mininum DMA zone is 1MB in the world */ if (bits < 20 || bits > 64) { fprintf(stderr, "invalid dma mask bit, must be in 20-64\n");
@@ -107,6 +118,8 @@ int main(int argc, char **argv) map.node = node; map.dma_bits = bits; map.dma_dir = dir;
- map.dma_trans_ns = xdelay;
- if (ioctl(fd, cmd, &map)) { perror("ioctl"); exit(1);
Thanks Barry