-----Original Message----- From: liulongfang liulongfang@huawei.com Sent: Tuesday, May 7, 2024 9:29 AM To: Alex Williamson alex.williamson@redhat.com Cc: jgg@nvidia.com; Shameerali Kolothum Thodi shameerali.kolothum.thodi@huawei.com; Jonathan Cameron jonathan.cameron@huawei.com; kvm@vger.kernel.org; linux- kernel@vger.kernel.org; linuxarm@openeuler.org Subject: Re: [PATCH v6 2/5] hisi_acc_vfio_pci: modify the register location of the XQC address
On 2024/5/4 0:11, Alex Williamson wrote:
On Thu, 25 Apr 2024 21:23:19 +0800 Longfang Liu liulongfang@huawei.com wrote:
According to the latest hardware register specification. The DMA addresses of EQE and AEQE are not at the front of their respective register groups, but start from the second. So, previously fetching the value starting from the first register would result in an incorrect address.
Therefore, the register location from which the address is obtained needs to be modified.
How does this affect migration? Has it ever worked? Does this make
The general HiSilicon accelerator task will only use SQE and CQE. EQE is only used when user running kernel mode task and uses interrupt mode. AEQE is only used when user running task exceptions occur and software reset is required.
The DMA addresses of these four queues are written to the device by the device driver through the mailbox command during driver initialization. The DMA addresses of EQE and AEQE are migrated through the device register.
EQE and AEQE are not used in general task, after the live migration is completed, this DMA address error will not be found. until we added a new kernel-mode test case that we discovered that this address was abnormal.
the migration data incompatible?
This address only affects the kernel mode interrupt mode task function and device exception recovery function. They do not affect live migration functionality
Fixes: ???
OK!
Hi,
Could you please add the Fixes tag and resend this separately if there are no outstanding comments on this. This is not related to the debugfs support anyway.
Thanks, Shameer
Thanks. Longfang.
Signed-off-by: Longfang Liu liulongfang@huawei.com
drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c | 8 ++++---- drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h | 3 +++ 2 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
index 45351be8e270..0c7e31076ff4 100644 --- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c +++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c @@ -516,12 +516,12 @@ static int vf_qm_state_save(struct
hisi_acc_vf_core_device *hisi_acc_vdev,
return -EINVAL;/* Every reg is 32 bit, the dma address is 64 bit. */
- vf_data->eqe_dma = vf_data->qm_eqc_dw[1];
- vf_data->eqe_dma = vf_data->qm_eqc_dw[QM_XQC_ADDR_HIGH]; vf_data->eqe_dma <<= QM_XQC_ADDR_OFFSET;
- vf_data->eqe_dma |= vf_data->qm_eqc_dw[0];
- vf_data->aeqe_dma = vf_data->qm_aeqc_dw[1];
- vf_data->eqe_dma |= vf_data->qm_eqc_dw[QM_XQC_ADDR_LOW];
- vf_data->aeqe_dma = vf_data->qm_aeqc_dw[QM_XQC_ADDR_HIGH]; vf_data->aeqe_dma <<= QM_XQC_ADDR_OFFSET;
- vf_data->aeqe_dma |= vf_data->qm_aeqc_dw[0];
vf_data->aeqe_dma |= vf_data->qm_aeqc_dw[QM_XQC_ADDR_LOW];
/* Through SQC_BT/CQC_BT to get sqc and cqc address */ ret = qm_get_sqc(vf_qm, &vf_data->sqc_dma);
diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
index 5bab46602fad..f887ab98581c 100644 --- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h +++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h @@ -38,6 +38,9 @@ #define QM_REG_ADDR_OFFSET 0x0004
#define QM_XQC_ADDR_OFFSET 32U +#define QM_XQC_ADDR_LOW 0x1 +#define QM_XQC_ADDR_HIGH 0x2
#define QM_VF_AEQ_INT_MASK 0x0004 #define QM_VF_EQ_INT_MASK 0x000c #define QM_IFC_INT_SOURCE_V 0x0020
.
-
Shameerali Kolothum Thodi