Dear all，
openEuler 22.09创新版本release版本RC4阶段测试验证版本发起社区验证及公示。
该版本组件主体功能已趋于稳定（基线与release发布版本将保持一致），版本可稳定重复建，缺陷修复率96.5%，缺陷收敛明显，release sig联合QA
SIG、CICD SIG评估质量满足release版本RC4转测试条件，现发起release版本RC4版本并进入测试验证阶段。
社区各SIG组及所有爱好者可下载试用并验证该版本 ，版本测试能力/策略/测试执行由 openEuler QA SIG团队协同社区联合构建/验证，社区各个SIG组及开发者/爱好者协作支撑openEuler
22.09创新版本issue发现和定位修复，您发现和定位修复每一个issue不仅可以解决您使用openEuler创新版本的问题点，更可以支撑社区一起持续优化提升百万级openEuler用户的体验！
本次版本作为release版本的预览版本，该版本经过社区联合协作验证和issue修复后（2022/09/07~09/15），下一个版本里程碑点（预计在2022/09/19）将会提供
release preview版本。
openEuler 22.09版本feature list及release plan公示链接：
https://gitee.com/openeuler/release-management/blob/master/openEuler-22.09/release-plan.md
openEuler 22.09版本编译构建信息查询链接：
https://build.openeuler.org/project/show/openEuler:22.09
https://build.openeuler.org/project/show/openEuler:22.09:Epol
openEuler 22.09 release
版本RC4里程碑版本获取链接：
http://121.36.84.172/dailybuild/openEuler-22.09/rc4_openeuler-2022-09-07-12-34-55/
社区QA
版本测试提单规范
社区QA
测试平台 radiates
https://radiatest.openeuler.org
openEuler 22.09版本缺陷/安全漏洞情况公示：
通过bailybuilding、AT、Alpha、beta、release
RC 1~4总计8个里程碑验证及修复，版本已知缺陷403个，待修复缺陷24个，已知漏洞75个，待修复CVE安全漏洞14个，缺陷/漏洞统计详见附件清单，缺陷/漏洞问题详见各软件包源码仓库；
openEuler 22.09 release版本RC4阶段已知待修复问题清单公示：
|
编号 |
里程碑 |
任务ID |
任务标题 |
任务状态 |
关联仓库 |
|
1 |
openEuler-22.09-Alpha |
I5J3NM |
【安装冲突arm/x86_64】openEuler:22.09分支postgresql与libpq包安装冲突 |
待办的 |
src-openEuler/postgresql |
|
2 |
openEuler-22.09-Alpha |
I5JM71 |
【自编译失败】【x86】22.09环境，pytorch自编译失败 |
待办的 |
src-openEuler/pytorch |
|
3 |
openEuler-22.09-round-1 |
I5K0NK |
【arm】ltp用例tcp6-multi-diffip11执行失败产生softlockup问题 |
待办的 |
src-openEuler/kernel |
|
4 |
openEuler-22.09-round-1 |
I5KTVM |
caja-extensions is unresolvable in openEuler:22.09:Epol |
待办的 |
src-openEuler/caja-extensions |
|
5 |
openEuler-22.09-round-1 |
I5LN60 |
【22.09 RC1】【arm/x86】storm-nimbus.service服务stop失败，返回状态码143 |
待办的 |
src-openEuler/storm |
|
6 |
openEuler-22.09-round-1 |
I5LNBR |
【22.09 RC1】【arm/x86】storm-supervisor.service服务stop失败，返回状态码143 |
待办的 |
src-openEuler/storm |
|
7 |
openEuler-22.09-round-1 |
I5M6BS |
【22.09-RC1】【x86/arm】tensorflow源码包本地自编译失败 |
待办的 |
src-openEuler/tensorflow |
|
8 |
openEuler-22.09-round-1 |
I5MGFX |
[22.09 RC1] [arm/X86]
执行podman create --add-host host:192.168.122.172 alpine命令后，没有生成create-config文件
|
待办的 |
src-openEuler/podman |
|
9 |
openEuler-22.09-round-1 |
I5MNBL |
[22.09RC1 arm/x86] podman export -o redis-container.tar id
提示archive/tar: sockets not supported |
待办的 |
src-openEuler/podman |
|
10 |
openEuler-22.09-round-1 |
I5MNNT |
[22.09RC1 arm/x86] podman create --blkio-weight 15 alpine ls
提示Your kernel does not support Block I/O weight or the cgroup is not mounted. Weight discarded. |
待办的 |
src-openEuler/podman |
|
11 |
openEuler-22.09-round-1 |
I5MTA9 |
[22.09]默认未安装gcc |
待办的 |
src-openEuler/oemaker |
|
12 |
openEuler-22.09-round-2 |
I5NLZI |
【openEuler 22.09 rc2】启动器中个别应用图标显示异常 |
待办的 |
src-openEuler/dde |
|
13 |
openEuler-22.09-round-2 |
I5NOIG |
【22.09 RC2
】【arm/x86 】执行sudo -u hdfs hdfs namenode -format报错：“java.lang.ClassNotFoundException: org.apache.hadoop.thirdparty.com.google.common.base.Preconditions” |
待办的 |
src-openEuler/hadoop |
|
14 |
openEuler-22.09-round-2 |
I5NP6A |
kiran-cc-daemon build problem in openEuler:22.09:Epol |
待办的 |
src-openEuler/kiran-cc-daemon |
|
15 |
openEuler-22.09-round-3 |
I5O5WJ |
【openEuler-22.09-RC3】[arm/x86]指定配置文件进行查看/扫描失败 |
待办的 |
src-openEuler/trafficserver |
|
16 |
openEuler-22.09-round-3 |
I5P5HM |
【22.09_RC3_EPOL】【arm/x86】卸载afterburn提示Failed
to stop afterburn-sshkeys@.service |
已确认 |
src-openEuler/afterburn |
|
17 |
openEuler-22.09-round-3 |
I5PQ3O |
【openEuler-22.09-RC3】ompi-clean -v -d参数执行报错 |
修复中 |
src-openEuler/openmpi |
|
18 |
openEuler-22.09-round-3 |
I5PSOI |
chrony build problem in openEuler:22.09 |
待办的 |
src-openEuler/chrony |
|
19 |
openEuler-22.09-round-3 |
I5PXFV |
perl build problem in openEuler:22.09 |
待办的 |
src-openEuler/perl |
|
20 |
openEuler-22.09-round-3 |
I5Q1YA |
zstd build problem in openEuler:22.09 |
待办的 |
src-openEuler/zstd |
|
21 |
openEuler-22.09-round-3 |
I5Q216 |
pv build problem in openEuler:22.09 |
待办的 |
src-openEuler/pv |
|
22 |
openEuler-22.09-round-3 |
I5Q2EN |
rubygem-puma build problem in openEuler:22.09 |
待办的 |
src-openEuler/rubygem-puma |
|
23 |
openEuler-22.09-round-3 |
I5Q2F3 |
rubygem-redis build problem in openEuler:22.09 |
已确认 |
src-openEuler/rubygem-redis |
|
24 |
openEuler-22.09-round-3 |
I5Q2FE |
udisks2 build problem in openEuler:22.09 |
待办的 |
src-openEuler/udisks2 |
openEuler 22.09 release版本RC4阶段已知待修复安全漏洞清单公示：
|
编号 |
里程碑 |
任务ID |
任务标题 |
任务状态 |
关联仓库 |
|
1 |
openEuler-22.09-Alpha |
I5J3NM |
【安装冲突arm/x86_64】openEuler:22.09分支postgresql与libpq包安装冲突 |
待办的 |
src-openEuler/postgresql |
|
2 |
openEuler-22.09-Alpha |
I5JM71 |
【自编译失败】【x86】22.09环境，pytorch自编译失败 |
待办的 |
src-openEuler/pytorch |
|
3 |
openEuler-22.09-round-1 |
I5K0NK |
【arm】ltp用例tcp6-multi-diffip11执行失败产生softlockup问题 |
待办的 |
src-openEuler/kernel |
|
4 |
openEuler-22.09-round-1 |
I5KTVM |
caja-extensions is unresolvable in openEuler:22.09:Epol |
待办的 |
src-openEuler/caja-extensions |
|
5 |
openEuler-22.09-round-1 |
I5LN60 |
【22.09 RC1】【arm/x86】storm-nimbus.service服务stop失败，返回状态码143 |
待办的 |
src-openEuler/storm |
|
6 |
openEuler-22.09-round-1 |
I5LNBR |
【22.09 RC1】【arm/x86】storm-supervisor.service服务stop失败，返回状态码143 |
待办的 |
src-openEuler/storm |
|
7 |
openEuler-22.09-round-1 |
I5M6BS |
【22.09-RC1】【x86/arm】tensorflow源码包本地自编译失败 |
待办的 |
src-openEuler/tensorflow |
|
8 |
openEuler-22.09-round-1 |
I5MGFX |
[22.09 RC1] [arm/X86]
执行podman create --add-host host:192.168.122.172 alpine命令后，没有生成create-config文件
|
待办的 |
src-openEuler/podman |
|
9 |
openEuler-22.09-round-1 |
I5MNBL |
[22.09RC1 arm/x86] podman export -o redis-container.tar id
提示archive/tar: sockets not supported |
待办的 |
src-openEuler/podman |
|
10 |
openEuler-22.09-round-1 |
I5MNNT |
[22.09RC1 arm/x86] podman create --blkio-weight 15 alpine ls
提示Your kernel does not support Block I/O weight or the cgroup is not mounted. Weight discarded. |
待办的 |
src-openEuler/podman |
|
11 |
openEuler-22.09-round-1 |
I5MTA9 |
[22.09]默认未安装gcc |
待办的 |
src-openEuler/oemaker |
|
12 |
openEuler-22.09-round-2 |
I5NLZI |
【openEuler 22.09 rc2】启动器中个别应用图标显示异常 |
待办的 |
src-openEuler/dde |
|
13 |
openEuler-22.09-round-2 |
I5NOIG |
【22.09 RC2
】【arm/x86 】执行sudo -u hdfs hdfs namenode -format报错：“java.lang.ClassNotFoundException: org.apache.hadoop.thirdparty.com.google.common.base.Preconditions” |
待办的 |
src-openEuler/hadoop |
|
14 |
openEuler-22.09-round-2 |
I5NP6A |
kiran-cc-daemon build problem in openEuler:22.09:Epol |
待办的 |
src-openEuler/kiran-cc-daemon |
|
15 |
openEuler-22.09-round-3 |
I5O5WJ |
【openEuler-22.09-RC3】[arm/x86]指定配置文件进行查看/扫描失败 |
待办的 |
src-openEuler/trafficserver |
|
16 |
openEuler-22.09-round-3 |
I5P5HM |
【22.09_RC3_EPOL】【arm/x86】卸载afterburn提示Failed
to stop afterburn-sshkeys@.service |
已确认 |
src-openEuler/afterburn |
|
17 |
openEuler-22.09-round-3 |
I5PQ3O |
【openEuler-22.09-RC3】ompi-clean -v -d参数执行报错 |
修复中 |
src-openEuler/openmpi |
|
18 |
openEuler-22.09-round-3 |
I5PSOI |
chrony build problem in openEuler:22.09 |
待办的 |
src-openEuler/chrony |
|
19 |
openEuler-22.09-round-3 |
I5PXFV |
perl build problem in openEuler:22.09 |
待办的 |
src-openEuler/perl |
|
20 |
openEuler-22.09-round-3 |
I5Q1YA |
zstd build problem in openEuler:22.09 |
待办的 |
src-openEuler/zstd |
|
21 |
openEuler-22.09-round-3 |
I5Q216 |
pv build problem in openEuler:22.09 |
待办的 |
src-openEuler/pv |
|
22 |
openEuler-22.09-round-3 |
I5Q2EN |
rubygem-puma build problem in openEuler:22.09 |
待办的 |
src-openEuler/rubygem-puma |
|
23 |
openEuler-22.09-round-3 |
I5Q2F3 |
rubygem-redis build problem in openEuler:22.09 |
已确认 |
src-openEuler/rubygem-redis |
|
24 |
openEuler-22.09-round-3 |
I5Q2FE |
udisks2 build problem in openEuler:22.09 |
待办的 |
src-openEuler/udisks2 |
陈亚强（openEuler release SIG）
Mobile: +86 13685759042
中国(China)-杭州(Hangzhou)-滨江区江淑路360号华为杭州研发中心
HUAWEI , Jiangshu Road., Binjiang District, Hangzhou, P.R.China
E-mail:
chenyaqiang@huawei.com
Open
Source OS for Digital Infrastructure
本邮件及其附件含有华为公司的保密信息，仅限于发送给上面地址中列出的个人或群组。禁止任何其他人以任何形
式使用（包括但不限于全部或部分地泄露、复制、或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话
或邮件通知发件人并删除本邮件！
This e-mail and its attachments contain confidential information from HUAWEI, which is intended only for
the person or entity whose address is listed above. Any use of the information contained herein in any way
(including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other
than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by
phone or email immediately and delete it