October 2021 - Kernel - mailweb.openeuler.org

perf spe-c2c record失败的问题
by haoxin 15 Dec '21

15 Dec '21

您好，我采用最细的openEuler-1.0测试perf spe-c2c的功能，但是发现/sys/devices下没有arm_spe_0这个目录执行perf spe-c2c record时显示： event syntax error: 'arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/' \___ Cannot find PMU `arm_spe_0'. Missing kernel support? 想问下您这是为什么？需要哪里开启spe功能吗？

3 2

[PATCH openEuler-1.0-LTS 01/19] nbd: don't handle response without a corresponding request message
by Yang Yingliang 30 Oct '21

30 Oct '21

From: Yu Kuai <yukuai3(a)huawei.com> mainline inclusion from mainline-next-20211018 commit b5644a3a79bf3be5f1238db1b2f241374b27b0f0 category: bugfix bugzilla: 49890 CVE: NA --------------------------- While handling a response message from server, nbd_read_stat() will try to get request by tag, and then complete the request. However, this is problematic if nbd haven't sent a corresponding request message: t1 t2 submit_bio nbd_queue_rq blk_mq_start_request recv_work nbd_read_stat blk_mq_tag_to_rq blk_mq_complete_request nbd_send_cmd Thus add a new cmd flag 'NBD_CMD_INFLIGHT', it will be set in nbd_send_cmd() and checked in nbd_read_stat(). Noted that this patch can't fix that blk_mq_tag_to_rq() might return a freed request, and this will be fixed in following patches. Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> Reviewed-by: Ming Lei <ming.lei(a)redhat.com> Reviewed-by: Josef Bacik <josef(a)toxicpanda.com> Link: https://lore.kernel.org/r/20210916093350.1410403-2-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/block/nbd.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 6a72c07ce3cba..05153b84d5400 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -120,6 +120,12 @@ struct nbd_device { }; #define NBD_CMD_REQUEUED 1 +/* + * This flag will be set if nbd_queue_rq() succeed, and will be checked and + * cleared in completion. Both setting and clearing of the flag are protected + * by cmd->lock. + */ +#define NBD_CMD_INFLIGHT 2 struct nbd_cmd { struct nbd_device *nbd; @@ -369,6 +375,7 @@ static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req, if (!mutex_trylock(&cmd->lock)) return BLK_EH_RESET_TIMER; + __clear_bit(NBD_CMD_INFLIGHT, &cmd->flags); if (!refcount_inc_not_zero(&nbd->config_refs)) { cmd->status = BLK_STS_TIMEOUT; mutex_unlock(&cmd->lock); @@ -674,6 +681,12 @@ static struct nbd_cmd *nbd_read_stat(struct nbd_device *nbd, int index) cmd = blk_mq_rq_to_pdu(req); mutex_lock(&cmd->lock); + if (!__test_and_clear_bit(NBD_CMD_INFLIGHT, &cmd->flags)) { + dev_err(disk_to_dev(nbd->disk), "Suspicious reply %d (status %u flags %lu)", + tag, cmd->status, cmd->flags); + ret = -ENOENT; + goto out; + } if (cmd->cmd_cookie != nbd_handle_to_cookie(handle)) { dev_err(disk_to_dev(nbd->disk), "Double reply on req %p, cmd_cookie %u, handle cookie %u\n", req, cmd->cmd_cookie, nbd_handle_to_cookie(handle)); @@ -768,6 +781,7 @@ static void nbd_clear_req(struct request *req, void *data, bool reserved) struct nbd_cmd *cmd = blk_mq_rq_to_pdu(req); mutex_lock(&cmd->lock); + __clear_bit(NBD_CMD_INFLIGHT, &cmd->flags); cmd->status = BLK_STS_IOERR; mutex_unlock(&cmd->lock); @@ -903,7 +917,13 @@ static int nbd_handle_cmd(struct nbd_cmd *cmd, int index) * returns EAGAIN can be retried on a different socket. */ ret = nbd_send_cmd(nbd, cmd, index); - if (ret == -EAGAIN) { + /* + * Access to this flag is protected by cmd->lock, thus it's safe to set + * the flag after nbd_send_cmd() succeed to send request to server. + */ + if (!ret) + __set_bit(NBD_CMD_INFLIGHT, &cmd->flags); + else if (ret == -EAGAIN) { dev_err_ratelimited(disk_to_dev(nbd->disk), "Request send failed, requeueing\n"); nbd_mark_nsock_dead(nbd, nsock, 1); -- 2.25.1

1 18

[PATCH openEuler-1.0-LTS 1/5] numa: Move the management structures for cdm nodes to ddr
by Yang Yingliang 30 Oct '21

30 Oct '21

From: Wang Wensheng <wangwensheng4(a)huawei.com> ascend inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4D63I CVE: NA ------------------------------------------------- The cdm nodes are easiler to raise an ECC error and it may cause the kernel crash if the essential structures went wrong. So move the management structures for hbm nodes to the ddr nodes of the same partion to reduce the probability of kernel crashes. Signed-off-by: Wang Wensheng <wangwensheng4(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/Kconfig | 10 ++++++++ arch/arm64/mm/numa.c | 54 +++++++++++++++++++++++++++++++++++++++- include/linux/nodemask.h | 7 ++++++ mm/sparse.c | 8 +++--- 4 files changed, 75 insertions(+), 4 deletions(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 9d49b9524e1d4..2f34aef79179e 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -1470,6 +1470,16 @@ config ASCEND_SHARE_POOL help This feature allows multiple processes to share virtual memory both in kernel and user level, which is only enabled for ascend platform. + +config ASCEND_CLEAN_CDM + bool "move the management structure for HBM to DDR" + def_bool n + depends on COHERENT_DEVICE + help + The cdm nodes sometimes are easiler to raise an ECC error and it may + cause the kernel crash if the essential structures went wrong. So move + the management structures for hbm nodes to the ddr nodes of the same + partion to reduce the probability of kernel crashes. endif endmenu diff --git a/arch/arm64/mm/numa.c b/arch/arm64/mm/numa.c index a9d3ad5ee0cc3..a194bad6fdfcf 100644 --- a/arch/arm64/mm/numa.c +++ b/arch/arm64/mm/numa.c @@ -45,6 +45,57 @@ inline int arch_check_node_cdm(int nid) return node_isset(nid, cdmmask); } +#ifdef CONFIG_ASCEND_CLEAN_CDM +/** + * cdm_node_to_ddr_node - Convert the cdm node to the ddr node of the + * same partion. + * @nid: input node ID + * + * Here is a typical memory topology in usage. + * There are some DDR and HBM in each partion and DDRs present at first, then + * come all the HBMs of the first partion, then HBMs of the second partion, etc. + * + * ------------------------- + * | P0 | P1 | + * ----------- | ----------- + * |node0 DDR| | |node1 DDR| + * |---------- | ----------| + * |node2 HBM| | |node4 HBM| + * |---------- | ----------| + * |node3 HBM| | |node5 HBM| + * ----------- | ----------- + * + * Return: + * This function returns a ddr node which is of the same partion with the input + * node if the input node is a HBM node. + * The input nid is returned if it is a DDR node or if the memory topology of + * the system doesn't apply to the above model. + */ +int __init cdm_node_to_ddr_node(int nid) +{ + nodemask_t ddr_mask; + int nr_ddr, cdm_per_part, fake_nid; + int nr_cdm = nodes_weight(cdmmask); + + if (!nr_cdm || nodes_empty(numa_nodes_parsed)) + return nid; + + if (!node_isset(nid, cdmmask)) + return nid; + + nodes_xor(ddr_mask, cdmmask, numa_nodes_parsed); + nr_ddr = nodes_weight(ddr_mask); + cdm_per_part = nr_cdm / nr_ddr ? : 1; + + fake_nid = (nid - nr_ddr) / cdm_per_part; + fake_nid = !node_isset(fake_nid, cdmmask) ? fake_nid : nid; + + pr_info("nid: %d, fake_nid: %d\n", nid, fake_nid); + + return fake_nid; +} +#endif + static int __init cdm_nodes_setup(char *s) { int nid; @@ -264,11 +315,12 @@ static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn) u64 nd_pa; void *nd; int tnid; + int fake_nid = cdm_node_to_ddr_node(nid); if (start_pfn >= end_pfn) pr_info("Initmem setup node %d [<memory-less node>]\n", nid); - nd_pa = memblock_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid); + nd_pa = memblock_alloc_try_nid(nd_size, SMP_CACHE_BYTES, fake_nid); nd = __va(nd_pa); /* report and initialize */ diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h index 41fb047bdba80..7c0571b95ce4d 100644 --- a/include/linux/nodemask.h +++ b/include/linux/nodemask.h @@ -508,6 +508,12 @@ static inline int node_random(const nodemask_t *mask) #ifdef CONFIG_COHERENT_DEVICE extern int arch_check_node_cdm(int nid); +#ifdef CONFIG_ASCEND_CLEAN_CDM +extern int cdm_node_to_ddr_node(int nid); +#else +static inline int cdm_node_to_ddr_node(int nid) { return nid; } +#endif + static inline nodemask_t system_mem_nodemask(void) { nodemask_t system_mem; @@ -551,6 +557,7 @@ static inline void node_clear_state_cdm(int node) #else static inline int arch_check_node_cdm(int nid) { return 0; } +static inline int cdm_node_to_ddr_node(int nid) { return nid; } static inline nodemask_t system_mem_nodemask(void) { diff --git a/mm/sparse.c b/mm/sparse.c index 62ae3880a9add..f19d2ca250cee 100644 --- a/mm/sparse.c +++ b/mm/sparse.c @@ -458,21 +458,23 @@ static void __init sparse_init_nid(int nid, unsigned long pnum_begin, { unsigned long pnum, usemap_longs, *usemap; struct page *map; + int fake_nid = cdm_node_to_ddr_node(nid); usemap_longs = BITS_TO_LONGS(SECTION_BLOCKFLAGS_BITS); - usemap = sparse_early_usemaps_alloc_pgdat_section(NODE_DATA(nid), + usemap = sparse_early_usemaps_alloc_pgdat_section(NODE_DATA(fake_nid), usemap_size() * map_count); if (!usemap) { pr_err("%s: node[%d] usemap allocation failed", __func__, nid); goto failed; } - sparse_buffer_init(map_count * section_map_size(), nid); + + sparse_buffer_init(map_count * section_map_size(), fake_nid); for_each_present_section_nr(pnum_begin, pnum) { if (pnum >= pnum_end) break; - map = sparse_mem_map_populate(pnum, nid, NULL); + map = sparse_mem_map_populate(pnum, fake_nid, NULL); if (!map) { pr_err("%s: node[%d] memory map backing failed. Some memory will not be available.", __func__, nid); -- 2.25.1

1 4

[PATCH openEuler-1.0-LTS 1/4] perf: hisi: Add support for HiSilicon SoC PMU driver dt probe
by Yang Yingliang 30 Oct '21

30 Oct '21

From: Fang Lijun <fanglijun3(a)huawei.com> ascend inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4D4WR CVE: NA --------------------------- Add support for hisi PMU driver dt probe, Fix its compile error when disable CONFIG_ACPI. Signed-off-by: Fang Lijun <fanglijun3(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/perf/Kconfig | 2 +- drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c | 1 + drivers/perf/hisilicon/hisi_uncore_hha_pmu.c | 23 +++++++++++++++---- drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c | 20 +++++++++++++--- 4 files changed, 38 insertions(+), 8 deletions(-) diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig index 92be6a36a128f..d4b9681418f88 100644 --- a/drivers/perf/Kconfig +++ b/drivers/perf/Kconfig @@ -72,7 +72,7 @@ config ARM_DSU_PMU config HISI_PMU bool "HiSilicon SoC PMU" - depends on ARM64 && ACPI + depends on ARM64 help Support for HiSilicon SoC uncore performance monitoring unit (PMU), such as: L3C, HHA and DDRC. diff --git a/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c b/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c index 090667d487504..3f3f4ab3aacce 100644 --- a/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c @@ -17,6 +17,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/list.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/smp.h> diff --git a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c index c35bc248db7e7..4dd4d6b650aed 100644 --- a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c @@ -17,6 +17,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/list.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/smp.h> @@ -235,20 +236,34 @@ static const struct acpi_device_id hisi_hha_pmu_acpi_match[] = { }; MODULE_DEVICE_TABLE(acpi, hisi_hha_pmu_acpi_match); -static int hisi_hha_pmu_init_data(struct platform_device *pdev, +#ifdef CONFIG_ACPI +static int hisi_hha_pmu_init_index(struct platform_device *pdev, struct hisi_pmu *hha_pmu) { - unsigned long long id; - struct resource *res; acpi_status status; + unsigned long long id; status = acpi_evaluate_integer(ACPI_HANDLE(&pdev->dev), - "_UID", NULL, &id); + "_UID", NULL, &id); if (ACPI_FAILURE(status)) return -EINVAL; hha_pmu->index_id = id; + return 0; +} +#endif + +static int hisi_hha_pmu_init_data(struct platform_device *pdev, + struct hisi_pmu *hha_pmu) +{ + struct resource *res; + +#ifdef CONFIG_ACPI + if (hisi_hha_pmu_init_index(pdev, hha_pmu)) + dev_info(&pdev->dev, "Can not init index id by acpi!\n"); +#endif + /* * Use SCCL_ID and UID to identify the HHA PMU, while * SCCL_ID is in MPIDR[aff2]. diff --git a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c index 6ce1d69c63198..4a42926800e50 100644 --- a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c @@ -17,6 +17,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/list.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/smp.h> @@ -234,20 +235,33 @@ static const struct acpi_device_id hisi_l3c_pmu_acpi_match[] = { }; MODULE_DEVICE_TABLE(acpi, hisi_l3c_pmu_acpi_match); -static int hisi_l3c_pmu_init_data(struct platform_device *pdev, +#ifdef CONFIG_ACPI +static int hisi_l3c_pmu_init_index(struct platform_device *pdev, struct hisi_pmu *l3c_pmu) { unsigned long long id; - struct resource *res; acpi_status status; status = acpi_evaluate_integer(ACPI_HANDLE(&pdev->dev), - "_UID", NULL, &id); + "_UID", NULL, &id); if (ACPI_FAILURE(status)) return -EINVAL; l3c_pmu->index_id = id; + return 0; +} +#endif + +static int hisi_l3c_pmu_init_data(struct platform_device *pdev, + struct hisi_pmu *l3c_pmu) +{ + struct resource *res; + +#ifdef CONFIG_ACPI + if (hisi_l3c_pmu_init_index(pdev, l3c_pmu)) + dev_info(&pdev->dev, "Can not init index id by acpi!"); +#endif /* * Use the SCCL_ID and CCL_ID to identify the L3C PMU, while * SCCL_ID is in MPIDR[aff2] and CCL_ID is in MPIDR[aff1]. -- 2.25.1

1 3

[PATCH openEuler-1.0-LTS 1/7] corelockup: Add support of cpu core hang check
by Yang Yingliang 30 Oct '21

30 Oct '21

From: Dong Kai <dongkai11(a)huawei.com> ascend inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4F3V1 CVE: NA -------------------------------- The softlockup and hardlockup detector only check the status of the cpu which it resides. If certain cpu core suspends, they are both not works. There is no any valid log but the cpu already abnormal and brings a lot of problems of system. To detect this case, we add the corelockup detector. First we use whether cpu core can responds to nmi as a sectence to determine if it is suspended. Then things is simple. Per cpu core maintains it's nmi interrupt counts and detector the nmi_counts of next cpu core. If the nmi interrupt counts not changed any more which means it can't respond nmi normally, we regard it as suspend. To ensure robustness, only consecutive lost nmi more than two times then trigger the warn. The detection chain is as following: cpu0->cpu1->...->cpuN->cpu0 Signed-off-by: Dong Kai <dongkai11(a)huawei.com> Reviewed-by: Kuohai Xu <xukuohai(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> Reviewed-by: Ding Tianhong <dingtianhong(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- include/linux/nmi.h | 6 ++ kernel/watchdog.c | 15 +++- kernel/watchdog_hld.c | 165 ++++++++++++++++++++++++++++++++++++++++++ lib/Kconfig.debug | 8 ++ 4 files changed, 192 insertions(+), 2 deletions(-) diff --git a/include/linux/nmi.h b/include/linux/nmi.h index 84f324d65068b..745d66c36e244 100644 --- a/include/linux/nmi.h +++ b/include/linux/nmi.h @@ -124,6 +124,12 @@ static inline int hardlockup_detector_perf_init(void) { return 0; } # endif #endif +#ifdef CONFIG_CORELOCKUP_DETECTOR +extern void corelockup_detector_init(void); +extern void corelockup_detector_online_cpu(unsigned int cpu); +extern void corelockup_detector_offline_cpu(unsigned int cpu); +#endif + void watchdog_nmi_stop(void); void watchdog_nmi_start(void); int watchdog_nmi_probe(void); diff --git a/kernel/watchdog.c b/kernel/watchdog.c index 0dd17265dcbd4..8b54fd30a597f 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -551,15 +551,23 @@ static void softlockup_start_all(void) int lockup_detector_online_cpu(unsigned int cpu) { - if (cpumask_test_cpu(cpu, &watchdog_allowed_mask)) + if (cpumask_test_cpu(cpu, &watchdog_allowed_mask)) { watchdog_enable(cpu); +#ifdef CONFIG_CORELOCKUP_DETECTOR + corelockup_detector_online_cpu(cpu); +#endif + } return 0; } int lockup_detector_offline_cpu(unsigned int cpu) { - if (cpumask_test_cpu(cpu, &watchdog_allowed_mask)) + if (cpumask_test_cpu(cpu, &watchdog_allowed_mask)) { watchdog_disable(cpu); +#ifdef CONFIG_CORELOCKUP_DETECTOR + corelockup_detector_offline_cpu(cpu); +#endif + } return 0; } @@ -783,4 +791,7 @@ void __init lockup_detector_init(void) if (!watchdog_nmi_probe()) nmi_watchdog_available = true; lockup_detector_setup(); +#ifdef CONFIG_CORELOCKUP_DETECTOR + corelockup_detector_init(); +#endif } diff --git a/kernel/watchdog_hld.c b/kernel/watchdog_hld.c index 904a95262fcf6..e965c31958203 100644 --- a/kernel/watchdog_hld.c +++ b/kernel/watchdog_hld.c @@ -39,6 +39,163 @@ notrace void __weak arch_touch_nmi_watchdog(void) } EXPORT_SYMBOL(arch_touch_nmi_watchdog); +#ifdef CONFIG_CORELOCKUP_DETECTOR +/* + * The softlockup and hardlockup detector only check the status + * of the cpu which it resides. If certain cpu core suspends, + * they are both not works. There is no any valid log but the + * cpu already abnormal and brings a lot of problems of system. + * To detect this case, we add the corelockup detector. + * + * First we use whether cpu core can responds to nmi as a sectence + * to determine if it is suspended. Then things is simple. Per cpu + * core maintains it's nmi interrupt counts and detector the + * nmi_counts of next cpu core. If the nmi interrupt counts not + * changed any more which means it can't respond nmi normally, we + * regard it as suspend. + * + * To ensure robustness, only consecutive lost nmi more than two + * times then trigger the warn. + * + * The detection chain is as following: + * cpu0->cpu1->...->cpuN->cpu0 + * + * detector_cpu: the target cpu to detector of current cpu + * nmi_interrupts: the nmi counts of current cpu + * nmi_cnt_saved: saved nmi counts of detector_cpu + * nmi_cnt_missed: the nmi consecutive miss counts of detector_cpu + */ +static DEFINE_PER_CPU(unsigned int, detector_cpu); +static DEFINE_PER_CPU(unsigned long, nmi_interrupts); +static DEFINE_PER_CPU(unsigned long, nmi_cnt_saved); +static DEFINE_PER_CPU(unsigned long, nmi_cnt_missed); +static DEFINE_PER_CPU(bool, core_watchdog_warn); + +static void watchdog_nmi_interrupts(void) +{ + __this_cpu_inc(nmi_interrupts); +} + +static void corelockup_status_copy(unsigned int from, unsigned int to) +{ + per_cpu(nmi_cnt_saved, to) = per_cpu(nmi_cnt_saved, from); + per_cpu(nmi_cnt_missed, to) = per_cpu(nmi_cnt_missed, from); + + /* always update detector cpu at the end */ + per_cpu(detector_cpu, to) = per_cpu(detector_cpu, from); +} + +static void corelockup_status_init(unsigned int cpu, unsigned int target) +{ + /* + * initialize saved count to max to avoid unnecessary misjudge + * caused by delay running of nmi on target cpu + */ + per_cpu(nmi_cnt_saved, cpu) = ULONG_MAX; + per_cpu(nmi_cnt_missed, cpu) = 0; + + /* always update detector cpu at the end */ + per_cpu(detector_cpu, cpu) = target; +} + +void __init corelockup_detector_init(void) +{ + unsigned int cpu, next; + + /* detector cpu is set to the next valid logically one */ + for_each_cpu_and(cpu, &watchdog_cpumask, cpu_online_mask) { + next = cpumask_next_and(cpu, &watchdog_cpumask, + cpu_online_mask); + if (next >= nr_cpu_ids) + next = cpumask_first_and(&watchdog_cpumask, + cpu_online_mask); + corelockup_status_init(cpu, next); + } +} + +/* + * Before: first->next + * After: first->[new]->next + */ +void corelockup_detector_online_cpu(unsigned int cpu) +{ + unsigned int first = cpumask_first_and(&watchdog_cpumask, + cpu_online_mask); + + if (WARN_ON(first >= nr_cpu_ids)) + return; + + /* cpu->next */ + corelockup_status_copy(first, cpu); + + /* first->cpu */ + corelockup_status_init(first, cpu); +} + +/* + * Before: prev->cpu->next + * After: prev->next + */ +void corelockup_detector_offline_cpu(unsigned int cpu) +{ + unsigned int prev = nr_cpu_ids; + unsigned int i; + + /* found prev cpu */ + for_each_cpu_and(i, &watchdog_cpumask, cpu_online_mask) { + if (per_cpu(detector_cpu, i) == cpu) { + prev = i; + break; + } + } + + if (WARN_ON(prev == nr_cpu_ids)) + return; + + /* prev->next */ + corelockup_status_copy(cpu, prev); +} + +static bool is_corelockup(unsigned int cpu) +{ + unsigned long nmi_int = per_cpu(nmi_interrupts, cpu); + + /* skip check if only one cpu online */ + if (cpu == smp_processor_id()) + return false; + + if (__this_cpu_read(nmi_cnt_saved) != nmi_int) { + __this_cpu_write(nmi_cnt_saved, nmi_int); + __this_cpu_write(nmi_cnt_missed, 0); + per_cpu(core_watchdog_warn, cpu) = false; + return false; + } + + __this_cpu_inc(nmi_cnt_missed); + if (__this_cpu_read(nmi_cnt_missed) > 2) + return true; + + return false; +} +NOKPROBE_SYMBOL(is_corelockup); + +static void watchdog_corelockup_check(struct pt_regs *regs) +{ + unsigned int cpu = __this_cpu_read(detector_cpu); + + if (is_corelockup(cpu)) { + if (per_cpu(core_watchdog_warn, cpu) == true) + return; + pr_emerg("Watchdog detected core LOCKUP on cpu %d\n", cpu); + + if (hardlockup_panic) + nmi_panic(regs, "Core LOCKUP"); + + per_cpu(core_watchdog_warn, cpu) = true; + } +} +#endif + #ifdef CONFIG_HARDLOCKUP_CHECK_TIMESTAMP static DEFINE_PER_CPU(ktime_t, last_timestamp); static DEFINE_PER_CPU(unsigned int, nmi_rearmed); @@ -106,6 +263,14 @@ static inline bool watchdog_check_timestamp(void) void watchdog_hardlockup_check(struct pt_regs *regs) { +#ifdef CONFIG_CORELOCKUP_DETECTOR + /* Kick nmi interrupts */ + watchdog_nmi_interrupts(); + + /* corelockup check */ + watchdog_corelockup_check(regs); +#endif + if (__this_cpu_read(watchdog_nmi_touch) == true) { __this_cpu_write(watchdog_nmi_touch, false); return; diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 0ee305de7d0ec..4a78bacd405bd 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -881,6 +881,14 @@ config HARDLOCKUP_DETECTOR chance to run. The current stack trace is displayed upon detection and the system will stay locked up. +config CORELOCKUP_DETECTOR + bool "Detect Core Lockups" + depends on HARDLOCKUP_DETECTOR && SOFTLOCKUP_DETECTOR + depends on ARM64 + default n + help + Corelockups is used to check whether cpu core hungup or not. + config BOOTPARAM_HARDLOCKUP_PANIC bool "Panic (Reboot) On Hard Lockups" depends on HARDLOCKUP_DETECTOR -- 2.25.1

1 6

[PATCH openEuler-1.0-LTS 01/41] share_pool: Rename sp_stat_idr to sp_proc_stat_idr
by Yang Yingliang 30 Oct '21

30 Oct '21

From: Tang Yizhou <tangyizhou(a)huawei.com> ascend inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4EUVI CVE: NA ------------------------------------------------- We are going to redesign the accounting subsystem of share pool. We need to disambiguate the meaning of sp_stat_idr, as we will introduce an struct which representing per-spg statistics. Signed-off-by: Tang Yizhou <tangyizhou(a)huawei.com> Reviewed-by: Ding Tianhong <dingtianhong(a)huawei.com> Signed-off-by: Zhou Guanghui <zhouguanghui1(a)huawei.com> Reviewed-by: Weilong Chen <chenweilong(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- mm/share_pool.c | 44 ++++++++++++++++++++++---------------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/mm/share_pool.c b/mm/share_pool.c index cd6e137fe6698..c4b8daa47fcfd 100644 --- a/mm/share_pool.c +++ b/mm/share_pool.c @@ -95,9 +95,9 @@ static DEFINE_IDA(sp_group_id_ida); /*** Statistical and maintenance tools ***/ /* idr of all sp_proc_stats */ -static DEFINE_IDR(sp_stat_idr); -/* rw semaphore for sp_stat_idr and mm->sp_stat_id */ -static DECLARE_RWSEM(sp_stat_sem); +static DEFINE_IDR(sp_proc_stat_idr); +/* rw semaphore for sp_proc_stat_idr */ +static DECLARE_RWSEM(sp_proc_stat_sem); /* for kthread buff_module_guard_work */ static struct sp_proc_stat kthread_stat; @@ -107,7 +107,7 @@ static struct sp_proc_stat *sp_get_proc_stat_locked(int tgid) { struct sp_proc_stat *stat; - stat = idr_find(&sp_stat_idr, tgid); + stat = idr_find(&sp_proc_stat_idr, tgid); /* maybe NULL or not, we always return it */ return stat; @@ -118,7 +118,7 @@ static struct sp_proc_stat *sp_get_proc_stat_ref_locked(int tgid) { struct sp_proc_stat *stat; - stat = idr_find(&sp_stat_idr, tgid); + stat = idr_find(&sp_proc_stat_idr, tgid); if (!stat || !atomic_inc_not_zero(&stat->use_count)) stat = NULL; @@ -137,16 +137,16 @@ static struct sp_proc_stat *sp_init_proc_stat(struct task_struct *tsk, int id, tgid = tsk->tgid; int ret; - down_write(&sp_stat_sem); + down_write(&sp_proc_stat_sem); id = mm->sp_group_master->sp_stat_id; if (id) { /* other threads in the same process may have initialized it */ stat = sp_get_proc_stat_locked(tgid); if (stat) { - up_write(&sp_stat_sem); + up_write(&sp_proc_stat_sem); return stat; } else { - up_write(&sp_stat_sem); + up_write(&sp_proc_stat_sem); /* if enter this branch, that's our mistake */ pr_err_ratelimited("share pool: proc stat invalid id %d\n", id); return ERR_PTR(-EBUSY); @@ -155,7 +155,7 @@ static struct sp_proc_stat *sp_init_proc_stat(struct task_struct *tsk, stat = kzalloc(sizeof(*stat), GFP_KERNEL); if (stat == NULL) { - up_write(&sp_stat_sem); + up_write(&sp_proc_stat_sem); pr_err_ratelimited("share pool: alloc proc stat failed due to lack of memory\n"); return ERR_PTR(-ENOMEM); } @@ -167,16 +167,16 @@ static struct sp_proc_stat *sp_init_proc_stat(struct task_struct *tsk, stat->mm = mm; get_task_comm(stat->comm, tsk); - ret = idr_alloc(&sp_stat_idr, stat, tgid, tgid + 1, GFP_KERNEL); + ret = idr_alloc(&sp_proc_stat_idr, stat, tgid, tgid + 1, GFP_KERNEL); if (ret < 0) { - up_write(&sp_stat_sem); + up_write(&sp_proc_stat_sem); pr_err_ratelimited("share pool: proc stat idr alloc failed %d\n", ret); kfree(stat); return ERR_PTR(ret); } mm->sp_group_master->sp_stat_id = ret; - up_write(&sp_stat_sem); + up_write(&sp_proc_stat_sem); return stat; } @@ -184,9 +184,9 @@ static struct sp_proc_stat *sp_get_proc_stat(int tgid) { struct sp_proc_stat *stat; - down_read(&sp_stat_sem); + down_read(&sp_proc_stat_sem); stat = sp_get_proc_stat_locked(tgid); - up_read(&sp_stat_sem); + up_read(&sp_proc_stat_sem); return stat; } @@ -195,9 +195,9 @@ struct sp_proc_stat *sp_get_proc_stat_ref(int tgid) { struct sp_proc_stat *stat; - down_read(&sp_stat_sem); + down_read(&sp_proc_stat_sem); stat = sp_get_proc_stat_ref_locked(tgid); - up_read(&sp_stat_sem); + up_read(&sp_proc_stat_sem); return stat; } @@ -2850,10 +2850,10 @@ __setup("enable_sp_multi_group_mode", enable_sp_multi_group_mode); static void free_sp_proc_stat(struct sp_proc_stat *stat) { - down_write(&sp_stat_sem); + down_write(&sp_proc_stat_sem); stat->mm->sp_group_master->sp_stat_id = 0; - idr_remove(&sp_stat_idr, stat->tgid); - up_write(&sp_stat_sem); + idr_remove(&sp_proc_stat_idr, stat->tgid); + up_write(&sp_proc_stat_sem); kfree(stat); } @@ -3163,9 +3163,9 @@ static int proc_stat_show(struct seq_file *seq, void *offset) byte2kb(atomic64_read(&kthread_stat.k2u_size))); /* pay attention to potential ABBA deadlock */ - down_read(&sp_stat_sem); - idr_for_each(&sp_stat_idr, idr_proc_stat_cb, seq); - up_read(&sp_stat_sem); + down_read(&sp_proc_stat_sem); + idr_for_each(&sp_proc_stat_idr, idr_proc_stat_cb, seq); + up_read(&sp_proc_stat_sem); return 0; } -- 2.25.1

1 40

[PATCH openEuler-1.0-LTS 1/7] sharepool: Fix ASLR broken
by Yang Yingliang 30 Oct '21

30 Oct '21

From: Wang Wensheng <wangwensheng4(a)huawei.com> ascend inclusion category: bugfix bugzilla: NA CVE: NA --------------------------- To avoid mmap vspace reserved for sharepool, we currently change the high_limit to MMAP_SHARE_POOL_START in arch_get_unmapped_area() and arch_get_unmapped_area_topdown(). In mmap-topdown scene, this make the start address of mmap being always MMAP_SHARE_POOL_START. ASLR got broken. To fix this, this patch set the mm->mmap_base based on MMAP_SHARE_POOL_START instead of STACK_TOP in topdown scene. Fixes: 4bdd5c21793e ("ascend: memory: introduce do_mm_populate and hugetlb_insert_hugepage") Signed-off-by: Wang Wensheng <wangwensheng4(a)huawei.com> Reviewed-by: Weilong Chen <chenweilong(a)huawei.com> Reviewed-by: Ding Tianhong <dingtianhong(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/mm/mmap.c | 6 +++++- include/linux/share_pool.h | 4 ++-- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/arm64/mm/mmap.c b/arch/arm64/mm/mmap.c index ac89686c4af89..87f29df8126ba 100644 --- a/arch/arm64/mm/mmap.c +++ b/arch/arm64/mm/mmap.c @@ -28,6 +28,7 @@ #include <linux/io.h> #include <linux/personality.h> #include <linux/random.h> +#include <linux/share_pool.h> #include <asm/cputype.h> @@ -80,7 +81,10 @@ static unsigned long mmap_base(unsigned long rnd, struct rlimit *rlim_stack) else if (gap > MAX_GAP) gap = MAX_GAP; - return PAGE_ALIGN(STACK_TOP - gap - rnd); + if (sp_is_enabled()) + return ALIGN_DOWN(MMAP_SHARE_POOL_START - rnd, PAGE_SIZE); + else + return PAGE_ALIGN(STACK_TOP - gap - rnd); } /* diff --git a/include/linux/share_pool.h b/include/linux/share_pool.h index 9650f257b3ad7..9557a8be46677 100644 --- a/include/linux/share_pool.h +++ b/include/linux/share_pool.h @@ -130,8 +130,6 @@ struct sp_proc_stat { atomic64_t k2u_size; }; -#ifdef CONFIG_ASCEND_SHARE_POOL - #define MAP_SHARE_POOL 0x100000 #define MMAP_TOP_4G_SIZE 0x100000000UL @@ -148,6 +146,8 @@ struct sp_proc_stat { #define MMAP_SHARE_POOL_START (MMAP_SHARE_POOL_END - MMAP_SHARE_POOL_SIZE) #define MMAP_SHARE_POOL_16G_START (MMAP_SHARE_POOL_END - MMAP_SHARE_POOL_DVPP_SIZE) +#ifdef CONFIG_ASCEND_SHARE_POOL + static inline void sp_init_mm(struct mm_struct *mm) { mm->sp_group = NULL; -- 2.25.1

1 6

[PATCH openEuler-5.10 01/20] perf stat: Add --quiet option
by Zheng Zengkai 30 Oct '21

30 Oct '21

From: Andi Kleen <andi(a)firstfloor.org> mainline inclusion from mainline-5.11 commit 55a4de94c64bacffbcd802c954764e0de2ab217f category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4CMQA CVE: NA -------------------------------- Add a new --quiet option to 'perf stat'. This is useful with 'perf stat record' to write the data only to the perf.data file, which can lower measurement overhead because the data doesn't need to be formatted. On my 4C desktop: % time ./perf stat record -e $(python -c 'print ",\ ".join(["cycles"]*1000)') -a -I 1000 sleep 5 ... real 0m5.377s user 0m0.238s sys 0m0.452s % time ./perf stat record --quiet -e $(python -c 'print ",\ ".join(["cycles"]*1000)') -a -I 1000 sleep 5 real 0m5.452s user 0m0.183s sys 0m0.423s In this example it cuts the user time by 20%. On systems with more cores the savings are higher. Signed-off-by: Andi Kleen <andi(a)firstfloor.org> Acked-by: Jiri Olsa <jolsa(a)kernel.org> Cc: Alexey Budankov <alexey.budankov(a)linux.intel.com> Link: http://lore.kernel.org/lkml/20201027002737.30942-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: yin-xiujiang <yinxiujiang(a)kylinos.cn> Reviewed-by: Wang ShaoBo <bobo.shaobowang(a)huawei.com> Reviewed-by: Yang Jihong <yangjihong1(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> --- tools/perf/Documentation/perf-stat.txt | 4 ++++ tools/perf/builtin-stat.c | 6 +++++- tools/perf/util/stat.h | 1 + 3 files changed, 10 insertions(+), 1 deletion(-) diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt index 9f9f29025e49..f9bcd95bf352 100644 --- a/tools/perf/Documentation/perf-stat.txt +++ b/tools/perf/Documentation/perf-stat.txt @@ -320,6 +320,10 @@ STAT RECORD ----------- Stores stat data into perf data file. +--quiet:: +Don't print output. This is useful with perf stat record below to only +write data to the perf.data file. + -o file:: --output file:: Output file name. diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index b01af171d94f..89e80a3bc9c3 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -973,6 +973,8 @@ static void print_counters(struct timespec *ts, int argc, const char **argv) if (STAT_RECORD && perf_stat.data.is_pipe) return; + if (stat_config.quiet) + return; perf_evlist__print_counters(evsel_list, &stat_config, &target, ts, argc, argv); } @@ -1171,6 +1173,8 @@ static struct option stat_options[] = { "threads of same physical core"), OPT_BOOLEAN(0, "summary", &stat_config.summary, "print summary for interval mode"), + OPT_BOOLEAN(0, "quiet", &stat_config.quiet, + "don't print output (useful with record)"), #ifdef HAVE_LIBPFM OPT_CALLBACK(0, "pfm-events", &evsel_list, "event", "libpfm4 event selector. use 'perf list' to list available events", @@ -2132,7 +2136,7 @@ int cmd_stat(int argc, const char **argv) goto out; } - if (!output) { + if (!output && !stat_config.quiet) { struct timespec tm; mode = append_file ? "a" : "w"; diff --git a/tools/perf/util/stat.h b/tools/perf/util/stat.h index 487010c624be..05adf8165025 100644 --- a/tools/perf/util/stat.h +++ b/tools/perf/util/stat.h @@ -122,6 +122,7 @@ struct perf_stat_config { bool metric_no_group; bool metric_no_merge; bool stop_read_counter; + bool quiet; FILE *output; unsigned int interval; unsigned int timeout; -- 2.20.1

1 19

[PATCH openEuler-1.0-LTS 001/103] mm/vmalloc: Hugepage vmalloc mappings
by Yang Yingliang 30 Oct '21

30 Oct '21

From: Nicholas Piggin <npiggin(a)gmail.com> ascend inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4EUVI CVE: NA https://lwn.net/ml/linux-kernel/20200825145753.529284-12-npiggin@gmail.com/ Don't distinction between vmalloc and hugepage vmalloc, because there is no size print in alloc_large_system_hash in v4.19. And this patch add page_order in vm_struct, it will break kabi. -------------- Support huge page vmalloc mappings. Config option HAVE_ARCH_HUGE_VMALLOC enables support on architectures that define HAVE_ARCH_HUGE_VMAP and supports PMD sized vmap mappings. vmalloc will attempt to allocate PMD-sized pages if allocating PMD size or larger, and fall back to small pages if that was unsuccessful. Allocations that do not use PAGE_KERNEL prot are not permitted to use huge pages, because not all callers expect this (e.g., module allocations vs strict module rwx). This reduces TLB misses by nearly 30x on a `git diff` workload on a 2-node POWER9 (59,800 -> 2,100) and reduces CPU cycles by 0.54%. This can result in more internal fragmentation and memory overhead for a given allocation, an option nohugevmalloc is added to disable at boot. Signed-off-by: Nicholas Piggin <npiggin(a)gmail.com> Signed-off-by: Rui Xiang <rui.xiang(a)huawei.com> Reviewed-by: Ding Tianhong <dingtianhong(a)huawei.com> Reviewed-by: Zefan Li <lizefan(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Weilong Chen <chenweilong(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/Kconfig | 4 + include/linux/vmalloc.h | 1 + mm/vmalloc.c | 160 +++++++++++++++++++++++++++++++--------- 3 files changed, 130 insertions(+), 35 deletions(-) diff --git a/arch/Kconfig b/arch/Kconfig index e906cbb213444..00f55932ba781 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -559,6 +559,10 @@ config HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD config HAVE_ARCH_HUGE_VMAP bool +config HAVE_ARCH_HUGE_VMALLOC + depends on HAVE_ARCH_HUGE_VMAP + bool + config HAVE_ARCH_SOFT_DIRTY bool diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index 496ac80046c01..07b4b1141ed8a 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -39,6 +39,7 @@ struct vm_struct { unsigned long size; unsigned long flags; struct page **pages; + unsigned int page_order; unsigned int nr_pages; phys_addr_t phys_addr; const void *caller; diff --git a/mm/vmalloc.c b/mm/vmalloc.c index fc6394184a1ba..e76b806a6c003 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -41,6 +41,19 @@ #include "internal.h" +#ifdef CONFIG_HAVE_ARCH_HUGE_VMALLOC +static bool __ro_after_init vmap_allow_huge = true; + +static int __init set_nohugevmalloc(char *str) +{ + vmap_allow_huge = false; + return 0; +} +early_param("nohugevmalloc", set_nohugevmalloc); +#else /* CONFIG_HAVE_ARCH_HUGE_VMALLOC */ +static const bool vmap_allow_huge = false; +#endif /* CONFIG_HAVE_ARCH_HUGE_VMALLOC */ + struct vfree_deferred { struct llist_head list; struct work_struct wq; @@ -410,6 +423,61 @@ static int vmap_pages_p4d_range(pgd_t *pgd, unsigned long addr, return 0; } +static int vmap_small_pages_range_noflush(unsigned long addr, unsigned long end, + pgprot_t prot, struct page **pages) +{ + pgd_t *pgd; + unsigned long next; + int err = 0; + int nr = 0; + + BUG_ON(addr >= end); + pgd = pgd_offset_k(addr); + do { + next = pgd_addr_end(addr, end); + err = vmap_pages_p4d_range(pgd, addr, next, prot, pages, &nr); + if (err) + return err; + } while (pgd++, addr = next, addr != end); + + return 0; +} + +static int vmap_pages_range_noflush(unsigned long addr, unsigned long end, + pgprot_t prot, struct page **pages, unsigned int page_shift) +{ + unsigned int i, nr = (end - addr) >> PAGE_SHIFT; + + WARN_ON(page_shift < PAGE_SHIFT); + + if (page_shift == PAGE_SHIFT) + return vmap_small_pages_range_noflush(addr, end, prot, pages); + + for (i = 0; i < nr; i += 1U << (page_shift - PAGE_SHIFT)) { + int err; + + err = vmap_range_noflush(addr, addr + (1UL << page_shift), + __pa(page_address(pages[i])), prot, + page_shift); + if (err) + return err; + + addr += 1UL << page_shift; + } + + return 0; +} + +static int vmap_pages_range(unsigned long addr, unsigned long end, + pgprot_t prot, struct page **pages, unsigned int page_shift) +{ + int err; + + err = vmap_pages_range_noflush(addr, end, prot, pages, page_shift); + flush_cache_vmap(addr, end); + return err; +} + /** * map_kernel_range_noflush - map kernel VM area with the specified pages * @addr: start of the VM area to map @@ -431,22 +499,7 @@ static int vmap_pages_p4d_range(pgd_t *pgd, unsigned long addr, int map_kernel_range_noflush(unsigned long addr, unsigned long size, pgprot_t prot, struct page **pages) { - unsigned long end = addr + size; - unsigned long next; - pgd_t *pgd; - int err = 0; - int nr = 0; - - BUG_ON(addr >= end); - pgd = pgd_offset_k(addr); - do { - next = pgd_addr_end(addr, end); - err = vmap_pages_p4d_range(pgd, addr, next, prot, pages, &nr); - if (err) - return err; - } while (pgd++, addr = next, addr != end); - - return 0; + return vmap_pages_range_noflush(addr, addr + size, prot, pages, PAGE_SHIFT); } int map_kernel_range(unsigned long start, unsigned long size, pgprot_t prot, @@ -2270,11 +2323,11 @@ static void __vunmap(const void *addr, int deallocate_pages) if (deallocate_pages) { int i; - for (i = 0; i < area->nr_pages; i++) { + for (i = 0; i < area->nr_pages; i += 1U << area->page_order) { struct page *page = area->pages[i]; BUG_ON(!page); - __free_pages(page, 0); + __free_pages(page, area->page_order); } kvfree(area->pages); @@ -2403,9 +2456,12 @@ static void *__vmalloc_node(unsigned long size, unsigned long align, gfp_t gfp_mask, pgprot_t prot, int node, const void *caller); static void *__vmalloc_area_node(struct vm_struct *area, gfp_t gfp_mask, - pgprot_t prot, int node) + pgprot_t prot, unsigned int page_shift, int node) { struct page **pages; + unsigned long addr = (unsigned long)area->addr; + unsigned long size = get_vm_area_size(area); + unsigned int page_order = page_shift - PAGE_SHIFT; unsigned int nr_pages; unsigned long array_size; unsigned int i; @@ -2415,7 +2471,7 @@ static void *__vmalloc_area_node(struct vm_struct *area, gfp_t gfp_mask, 0 : __GFP_HIGHMEM; - nr_pages = get_vm_area_size(area) >> PAGE_SHIFT; + nr_pages = size >> PAGE_SHIFT; array_size = (unsigned long)nr_pages * sizeof(struct page *); /* Please note that the recursion is strictly bounded. */ @@ -2434,27 +2490,27 @@ static void *__vmalloc_area_node(struct vm_struct *area, gfp_t gfp_mask, area->pages = pages; area->nr_pages = nr_pages; + area->page_order = page_order; - for (i = 0; i < area->nr_pages; i++) { + for (i = 0; i < area->nr_pages; i += 1U << page_order) { struct page *page; + int p; - if (node == NUMA_NO_NODE) - page = alloc_page(alloc_mask|highmem_mask); - else - page = alloc_pages_node(node, alloc_mask|highmem_mask, 0); - + page = alloc_pages_node(node, alloc_mask|highmem_mask, page_order); if (unlikely(!page)) { /* Successfully allocated i pages, free them in __vunmap() */ area->nr_pages = i; goto fail; } - area->pages[i] = page; + + for (p = 0; p < (1U << page_order); p++) + area->pages[i + p] = page + p; + if (gfpflags_allow_blocking(gfp_mask|highmem_mask)) cond_resched(); } - if (map_kernel_range((unsigned long)area->addr, get_vm_area_size(area), - prot, pages) < 0) + if (vmap_pages_range(addr, addr + size, prot, pages, page_shift) < 0) goto fail; return area->addr; @@ -2462,7 +2518,7 @@ static void *__vmalloc_area_node(struct vm_struct *area, gfp_t gfp_mask, fail: warn_alloc(gfp_mask, NULL, "vmalloc: allocation failure, allocated %ld of %ld bytes", - (area->nr_pages*PAGE_SIZE), area->size); + (area->nr_pages*PAGE_SIZE), size); vfree(area->addr); return NULL; } @@ -2491,19 +2547,42 @@ void *__vmalloc_node_range(unsigned long size, unsigned long align, struct vm_struct *area; void *addr; unsigned long real_size = size; + unsigned long real_align = align; + unsigned int shift = PAGE_SHIFT; - size = PAGE_ALIGN(size); if (!size || (size >> PAGE_SHIFT) > totalram_pages) goto fail; + if (vmap_allow_huge && (pgprot_val(prot) == pgprot_val(PAGE_KERNEL))) { + unsigned long size_per_node; + + /* + * Try huge pages. Only try for PAGE_KERNEL allocations, + * others like modules don't yet expect huge pages in + * their allocations due to apply_to_page_range not + * supporting them. + */ + + size_per_node = size; + if (node == NUMA_NO_NODE) + size_per_node /= num_online_nodes(); + if (size_per_node >= PMD_SIZE) { + shift = PMD_SHIFT; + align = max(real_align, 1UL << shift); + size = ALIGN(real_size, 1UL << shift); + } + } + +again: + size = PAGE_ALIGN(size); area = __get_vm_area_node(size, align, VM_ALLOC | VM_UNINITIALIZED | vm_flags, start, end, node, gfp_mask, caller); if (!area) goto fail; - addr = __vmalloc_area_node(area, gfp_mask, prot, node); + addr = __vmalloc_area_node(area, gfp_mask, prot, shift, node); if (!addr) - return NULL; + goto fail; /* * First make sure the mappings are removed from all page-tables @@ -2523,8 +2602,19 @@ void *__vmalloc_node_range(unsigned long size, unsigned long align, return addr; fail: - warn_alloc(gfp_mask, NULL, + if (shift > PAGE_SHIFT) { + free_vm_area(area); + shift = PAGE_SHIFT; + align = real_align; + size = real_size; + goto again; + } + + if (!area) { + /* Warn for area allocation, page allocations already warn */ + warn_alloc(gfp_mask, NULL, "vmalloc: allocation failure: %lu bytes", real_size); + } return NULL; } @@ -3503,7 +3593,7 @@ static int s_show(struct seq_file *m, void *p) seq_printf(m, " %pS", v->caller); if (v->nr_pages) - seq_printf(m, " pages=%d", v->nr_pages); + seq_printf(m, " pages=%d order=%d", v->nr_pages, v->page_order); if (v->phys_addr) seq_printf(m, " phys=%pa", &v->phys_addr); -- 2.25.1

1 102

[PATCH openEuler-1.0-LTS 01/26] mm: add do_vm_mmap
by Yang Yingliang 29 Oct '21

29 Oct '21

From: Fang Lijun <fanglijun3(a)huawei.com> ascend inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4D63I CVE: NA ------------------------------------------------- An interface do_vm_mmap is added to support the allocation in the address spaces of other processes. Signed-off-by: Fang Lijun <fanglijun3(a)huawei.com> Signed-off-by: Zhou Guanghui <zhouguanghui1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- include/linux/mm.h | 3 +++ mm/mmap.c | 34 ++++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+) diff --git a/include/linux/mm.h b/include/linux/mm.h index 75d94ea5d1c20..58fe28dd959b9 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -2436,6 +2436,9 @@ static inline void mm_populate(unsigned long addr, unsigned long len) {} extern int __must_check vm_brk(unsigned long, unsigned long); extern int __must_check vm_brk_flags(unsigned long, unsigned long, unsigned long); extern int vm_munmap(unsigned long, size_t); +extern unsigned long do_vm_mmap(struct mm_struct *mm, unsigned long addr, + unsigned long len, unsigned long prot, + unsigned long flag, unsigned long pgoff); extern unsigned long __must_check vm_mmap(struct file *, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long); diff --git a/mm/mmap.c b/mm/mmap.c index 80779bbb1c048..f7f1fd3b5fa39 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -3094,6 +3094,40 @@ int vm_munmap(unsigned long start, size_t len) } EXPORT_SYMBOL(vm_munmap); +/* + * Must acquire an additional reference to the mm struct to prevent the + * mm struct of other process from being released. + * + * This interface is applicable only to kernel thread scenarios. + */ +unsigned long do_vm_mmap(struct mm_struct *mm, unsigned long addr, + unsigned long len, unsigned long prot, + unsigned long flag, unsigned long pgoff) +{ + unsigned long ret; + unsigned long populate; + LIST_HEAD(uf); + + if (mm == NULL || current->mm) + return -EINVAL; + + if (down_write_killable(&mm->mmap_sem)) + return -EINTR; + + current->mm = mm; + ret = do_mmap_pgoff(0, addr, len, prot, flag, pgoff, + &populate, &uf); + + current->mm = NULL; + up_write(&mm->mmap_sem); + userfaultfd_unmap_complete(mm, &uf); + if (populate) + mm_populate(ret, populate); + + return ret; +} +EXPORT_SYMBOL(do_vm_mmap); + SYSCALL_DEFINE2(munmap, unsigned long, addr, size_t, len) { profile_munmap(addr); -- 2.25.1

1 25

Re: [PATCH openEuler-21.03] vfio-ccw: Reset FSM state to IDLE inside FSM
by Wangshaobo (bobo) 29 Oct '21

29 Oct '21

Reviewed-by: Wang ShaoBo <bobo.shaobowang(a)huawei.com> 在 2021/10/28 22:42, Chen Silong 写道: > From: Eric Farman <farman(a)linux.ibm.com> > > stable inclusion > from stable-v5.10.44 > commit cad3dc73c0645d00adfe96cebc8d950897cc1227 > bugzilla:https://bugzilla.openeuler.org/show_bug.cgi?id=453 > CVE: NA > > ------------------------------------------------- > > [ Upstream commit 6c02ac4c9211edabe17bda437ac97e578756f31b ] > > When an I/O request is made, the fsm_io_request() routine > moves the FSM state from IDLE to CP_PROCESSING, and then > fsm_io_helper() moves it to CP_PENDING if the START SUBCHANNEL > received a cc0. Yet, the error case to go from CP_PROCESSING > back to IDLE is done after the FSM call returns. > > Let's move this up into the FSM proper, to provide some > better symmetry when unwinding in this case. > > Signed-off-by: Eric Farman <farman(a)linux.ibm.com> > Reviewed-by: Cornelia Huck <cohuck(a)redhat.com> > Acked-by: Matthew Rosato <mjrosato(a)linux.ibm.com> > Message-Id: <20210511195631.3995081-3-farman(a)linux.ibm.com> > Signed-off-by: Cornelia Huck <cohuck(a)redhat.com> > Signed-off-by: Sasha Levin <sashal(a)kernel.org> > Signed-off-by: Chen Silong <2019117735(a)my.swjtu.edu.cn> > --- > drivers/s390/cio/vfio_ccw_fsm.c | 1 + > drivers/s390/cio/vfio_ccw_ops.c | 2 -- > 2 files changed, 1 insertion(+), 2 deletions(-) > > diff --git a/drivers/s390/cio/vfio_ccw_fsm.c b/drivers/s390/cio/vfio_ccw_fsm.c > index 23e61aa638e4..e435a9cd92da 100644 > --- a/drivers/s390/cio/vfio_ccw_fsm.c > +++ b/drivers/s390/cio/vfio_ccw_fsm.c > @@ -318,6 +318,7 @@ static void fsm_io_request(struct vfio_ccw_private *private, > } > > err_out: > + private->state = VFIO_CCW_STATE_IDLE; > trace_vfio_ccw_fsm_io_request(scsw->cmd.fctl, schid, > io_region->ret_code, errstr); > } > diff --git a/drivers/s390/cio/vfio_ccw_ops.c b/drivers/s390/cio/vfio_ccw_ops.c > index 1ad5f7018ec2..2280f51dd679 100644 > --- a/drivers/s390/cio/vfio_ccw_ops.c > +++ b/drivers/s390/cio/vfio_ccw_ops.c > @@ -276,8 +276,6 @@ static ssize_t vfio_ccw_mdev_write_io_region(struct vfio_ccw_private *private, > } > > vfio_ccw_fsm_event(private, VFIO_CCW_EVENT_IO_REQ); > - if (region->ret_code != 0) > - private->state = VFIO_CCW_STATE_IDLE; > ret = (region->ret_code != 0) ? region->ret_code : count; > > out_unlock:

1 0

[PATCH openEuler-1.0-LTS V3 0/6] Fix the problem that the number of tcp timeout retransmissions is lost
by Laibin Qiu 29 Oct '21

29 Oct '21

issue: https://gitee.com/openeuler/kernel/issues/I4AFRJ?from=project-issue Eric Dumazet (4): tcp: switch tcp and sch_fq to new earliest departure time model net_sched: sch_fq: ensure maxrate fq parameter applies to EDT flows tcp: address problems caused by EDT misshaps tcp: adjust rto_base in retransmits_timed_out() Yuchung Cheng (2): tcp: always set retrans_stamp on recovery tcp: create a helper to model exponential backoff net/ipv4/tcp_bbr.c | 7 +++-- net/ipv4/tcp_input.c | 17 +++++++----- net/ipv4/tcp_output.c | 31 +++++++++++++++------ net/ipv4/tcp_timer.c | 64 ++++++++++++++++++++----------------------- net/sched/sch_fq.c | 46 ++++++++++++++++++------------- 5 files changed, 93 insertions(+), 72 deletions(-) -- 2.22.0

1 6

[PATCH openEuler-1.0-LTS V2 0/6] Fix the problem that the
by Laibin Qiu 29 Oct '21

29 Oct '21

issue: https://gitee.com/openeuler/kernel/issues/I4AFRJ?from=project-issue Eric Dumazet (4): tcp: switch tcp and sch_fq to new earliest departure time model net_sched: sch_fq: ensure maxrate fq parameter applies to EDT flows tcp: address problems caused by EDT misshaps tcp: adjust rto_base in retransmits_timed_out() Yuchung Cheng (2): tcp: always set retrans_stamp on recovery tcp: create a helper to model exponential backoff net/ipv4/tcp_bbr.c | 7 +++-- net/ipv4/tcp_input.c | 17 +++++++----- net/ipv4/tcp_output.c | 31 +++++++++++++++------ net/ipv4/tcp_timer.c | 64 ++++++++++++++++++++----------------------- net/sched/sch_fq.c | 46 ++++++++++++++++++------------- 5 files changed, 93 insertions(+), 72 deletions(-) -- 2.22.0

1 6

[PATCH openEuler-1.0-LTS] README: README optimize
by Laibin Qiu 29 Oct '21

29 Oct '21

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4FS3G?from=project-issue CVE: NA --------------------------- There are some language problems in the README file, and MarkDown fromat syntax is not effective, and it needs to be adjusted. Signed-off-by: suqin <suqin2(a)huawei.com> Signed-off-by: Laibin Qiu <qiulaibin(a)huawei.com> --- README | 226 --------------------------------------------------- README.md | 237 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 237 insertions(+), 226 deletions(-) delete mode 100644 README create mode 100644 README.md diff --git a/README b/README deleted file mode 100644 index 46c9ea352..000000000 --- a/README +++ /dev/null @@ -1,226 +0,0 @@ -Contributions to openEuler kernel project -========================================= - -Sign CLA --------- - -Before submitting any Contributions to openEuler, you have to sign CLA. - -See: - https://openeuler.org/zh/cla.html - https://openeuler.org/en/cla.html - -Steps of submitting patches ---------------------------- - -1. Compile and test your patches successfully. -2. Generate patches - Your patches should be based on top of latest openEuler branch, and should - use git-format-patch to generate patches, and if it's a patchset, it's - better to use --cover-letter option to describe what the patchset does. - - Using scripts/checkpatch.pl to make sure there's no coding style issue. - - And make sure your patch follow unified openEuler patch format describe - below. - -3. Send patch to openEuler mailing list - Use this command to send patches to openEuler mailing list: - - git send-email *.patch -to="kernel(a)openeuler.org" --suppress-cc=all - - *NOTE*: that you must add --suppress-cc=all if you use git send-email, - otherwise the email will be cced to the people in upstream community and mailing - lists. - - *See*: How to send patches using git-send-email - https://git-scm.com/docs/git-send-email - -4. Mark "v1, v2, v3 ..." in your patch subject if you have multiple versions - to send out. - - Use --subject-prefix="PATCH v2" option to add v2 tag for patchset. - git format-patch --subject-prefix="PATCH v2" -1 - - Subject examples: - Subject: [PATCH v2 01/27] fork: fix some -Wmissing-prototypes warnings - Subject: [PATCH v3] ext2: improve scalability of bitmap searching - -5. Upstream your kernel patch to kernel community is strongly recommended. - openEuler will sync up with kernel master timely. - -6. Sign your work - the Developer’s Certificate of Origin - As the same of upstream kernel community, you also need to sign your patch. - - See: https://www.kernel.org/doc/html/latest/process/submitting-patches.html - - The sign-off is a simple line at the end of the explanation for the patch, - which certifies that you wrote it or otherwise have the right to pass it - on as an open-source patch. The rules are pretty simple: if you can certify - the below: - - Developer’s Certificate of Origin 1.1 - ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - - By making a contribution to this project, I certify that: - - (a) The contribution was created in whole or in part by me and I have - the right to submit it under the open source license indicated in - the file; or - - (b The contribution is based upon previous work that, to the best of - my knowledge, is covered under an appropriate open source license - and I have the right under that license to submit that work with - modifications, whether created in whole or in part by me, under - the same open source license (unless I am permitted to submit under - a different license), as indicated in the file; or - - (c) The contribution was provided directly to me by some other person - who certified (a), (b) or (c) and I have not modified it. - - (d) I understand and agree that this project and the contribution are - public and that a record of the contribution (including all personal - information I submit with it, including my sign-off) is maintained - indefinitely and may be redistributed consistent with this project - or the open source license(s) involved. - - then you just add a line saying: - - Signed-off-by: Random J Developer <random(a)developer.example.org> - - using your real name (sorry, no pseudonyms or anonymous contributions.) - -Use unified patch format ------------------------- - -Reasons: - -1. long term maintainability - openEuler will merge massive patches. If all patches are merged by casual - changelog format without a unified format, the git log will be messy, and - then it's hard to figure out the original patch. - -2. kernel upgrade - We definitely will upgrade our openEuler kernel in someday, using strict - patch management will alleviate the pain to migrate patches during big upgrade. - -3. easy for script parsing - Keyword highlighting is necessary for script parsing. - -Patch format definition ------------------------ - -[M] stands for "mandatory" -[O] stands for "option" -$category can be: bug preparation, bugfix, perf, feature, doc, other... - -If category is feature, then we also need to add feature name like below: - category: feature - feature: YYY (the feature name) - -If the patch is related to CVE or bugzilla, then we need add the corresponding -tag like below (In general, it should include at least one of the following): - CVE: $cve-id - bugzilla: $bug-id - -Additional changelog should include at least one of the flollwing: - 1) Why we should apply this patch - 2) What real problem in product does this patch resolved - 3) How could we reproduce this bug or how to test - 4) Other useful information for help to understand this patch or problem - -The detail information is very useful for porting patch to another kenrel branch. - -Example for mainline patch: - - mainline inclusion [M] - from $mainline-version [M] - commit $id [M] - category: $category [M] - bugzilla: $bug-id [O] - CVE: $cve-id [O] - - additional changelog [O] - - -------------------------------- - - original changelog - - Signed-off-by: $yourname <$yourname(a)huawei.com> [M] - - ($mainline-version could be mainline-3.5, mainline-3.6, etc...) - -Examples --------- - -mainline inclusion -from mainline-4.10 -commit 0becc0ae5b42828785b589f686725ff5bc3b9b25 -category: bugfix -bugzilla: 3004 -CVE: NA - -The patch fixes a BUG_ON in the product: injecting single bit ECC error -to memory before system boot use hardware inject tools, which cause a -large amount of CMCI during system booting . - -[ 1.146580] mce: [Hardware Error]: Machine check events logged -[ 1.152908] ------------[ cut here ]------------ -[ 1.157751] kernel BUG at kernel/timer.c:951! -[ 1.162321] invalid opcode: 0000 [#1] SMP -... - -------------------------------------------------- - -original changelog - -<original S-O-B> -Signed-off-by: Zhang San <zhangsan(a)huawei.com> -Tested-by: Li Si <lisi(a)huawei.com> - -Email Client - Thunderbird Settings ------------------------------------ - -If you are newly developer in the kernel community, it is highly recommended -to use thunderbird mail client. - -1. Thunderbird Installation - Get English version Thunderbird from http://www.mozilla.org/ and install - it on your system。 - - Download url: https://www.thunderbird.net/en-US/thunderbird/all/ - -2. Settings - 2.1 Use plain text format instead of HTML format - Options -> Account Settings -> Composition & Addressing, do *NOT* select - "Compose message in HTML format". - - 2.2 Editor Settings - Tools->Options->Advanced->Config editor. - - - To bring up the thunderbird's registry editor, and set: - "mailnews.send_plaintext_flowed" to "false". - - Disable HTML Format: Set "mail.identity.id1.compose_html" to "false". - - Enable UTF8: Set "prefs.converted-to-utf8" to "true". - - View message in UTF-8: Set "mailnews.view_default_charset" to "UTF-8". - - Set mailnews.wraplength to 9999 for avoiding auto-wrap - -Linux kernel -============ - -There are several guides for kernel developers and users. These guides can -be rendered in a number of formats, like HTML and PDF. Please read -Documentation/admin-guide/README.rst first. - -In order to build the documentation, use ``make htmldocs`` or -``make pdfdocs``. The formatted documentation can also be read online at: - - https://www.kernel.org/doc/html/latest/ - -There are various text files in the Documentation/ subdirectory, -several of them using the Restructured Text markup notation. -See Documentation/00-INDEX for a list of what is contained in each file. - -Please read the Documentation/process/changes.rst file, as it contains the -requirements for building and running the kernel, and information about -the problems which may result by upgrading your kernel. diff --git a/README.md b/README.md new file mode 100644 index 000000000..20832fd85 --- /dev/null +++ b/README.md @@ -0,0 +1,237 @@ +# How to Contribute +------- + +- [How to Contribute](#How to Contribute) + + \- [Sign the CLA](#Sign the CLA) + + \- [Steps of submitting patches](#Steps of submitting patches) + + \- [Use the unified patch format](#Use the unified patch format) + + \- [Define the patch format](#Define the patch format) + + \- [Examples](#Examples) + + \- [Email client - Thunderbird settings](#Email client - Thunderbird settings) + +- [Linux kernel](#Linux kernel) + +### Sign the CLA + +------- + +Before making any contributions to openEuler, sign the CLA first. + +Address: [https://openeuler.org/en/cla.html](https://openeuler.org/en/cla.html) + +### Steps of submitting patches +------- + +**Step 1** Compile and test your patches. + +**Step 2** Generate patches. + +Your patches should be generated based on the latest openEuler branch using git-format-patch. If your patches are in a patchset, it is better to use the **--cover-letter** option to describe what the patchset does. + +Use **scripts/checkpatch.pl** to ensure that no coding style issue exists. + +In addition, ensure that your patches comply with the unified openEuler patch format described below. + +**Step 3** Send your patches to the openEuler mailing list. + +To do so, run the following command: + + `git send-email *.patch -to="kernel(a)openeuler.org" --suppress-cc=all` + +*NOTE*: Add **--suppress-cc=all** if you use git-send-email; otherwise, the email will be copied to all people in the upstream community and mailing lists. + +For details about how to send patches using git-send-email, see [https://git-scm.com/docs/git-send-email](https://git-scm.com/docs/git-send-…. + +**Step 4** Mark "v1, v2, v3 ..." in your patch subject if you have multiple versions to send out. + +Use the **--subject-prefix="PATCH v2"** option to add the v2 tag to the patchset. + + `git format-patch --subject-prefix="PATCH v2" -1` + +Subject examples: + + Subject: [PATCH v2 01/27] fork: fix some -Wmissing-prototypes warnings + + Subject: [PATCH v3] ext2: improve scalability of bitmap searching + +**Step 5** Upstream your kernel patches to the kernel community (recommended). openEuler will synchronize with the kernel master in a timely manner. + +**Step 6** Sign your work - the Developer’s Certificate of Origin. + + Similar to the upstream kernel community, you also need to sign your patch. + + For details, see [https://www.kernel.org/doc/html/latest/process/submitting-patches.html](htt…. + + The sign-off is a simple line at the end of the explanation of the patch, which certifies that you wrote it or otherwise have the right to pass it on as an open source patch. The rules are pretty simple. You can certify as below: + + Developer’s Certificate of Origin 1.1 + + ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + By making a contribution to this project, I certify that: + + (a) The contribution was created in whole or in part by me and I have the right to submit it under the open source license indicated in the file; + + (b) The contribution is based upon previous work that, to the best of my knowledge, is covered under an appropriate open source license and I have the right under that license to submit that work with modifications, whether created in whole or in part by me, under the same open source license (unless I am permitted to submit under a different license), as indicated in the file; + + (c) The contribution was provided directly to me by some other person who certified (a), (b) or (c) and I have not modified it. + + (d) I understand and agree that this project and the contribution are public and that a record of the contribution (including all personal information I submit with it, including my sign-off) is maintained indefinitely and may be redistributed consistent with this project or the open source license(s) involved. + +Then you add a line saying: + +Signed-off-by: Random J Developer <random(a)developer.example.org> + +Use your real name (sorry, no pseudonyms or anonymous contributions). + +### Use the unified patch format +------- + +Reasons: + +1. Long term maintainability + + openEuler will merge massive patches. If all patches are merged by casual + + changelog formats without a unified format, the git logs will be messy, and + + then it is hard to figure out the original patches. + +2. Kernel upgrade + + We definitely will upgrade our openEuler kernel in someday, so strict patch management + + will alleviate the pain to migrate patches during big upgrades. + +3. Easy for script parsing + + Keyword highlighting is necessary for script parsing. + +### Define the patch format +------- + +[M] stands for "mandatory". + +[O] stands for "option". + +$category can be: bug preparation, bugfix, perf, feature, doc, other... + +If category is feature, we need to add a feature name as below: + +```cpp +category: feature +feature: YYY (the feature name) +``` + +If the patch is related to CVE or bugzilla, we need to add the corresponding tag as below (In general, it should include at least one of the following): + +```cpp +CVE: $cve-id +bugzilla: $bug-id +``` + +Additional changelog should include at least one of the following: + +1. Why we should apply this patch + +2. What real problems in the product does this patch resolved + +3. How could we reproduce this bug or how to test + +4. Other useful information for help to understand this patch or problem + +The detailed information is very useful for migrating a patch to another kernel branch. + +Example for mainline patch: + +```cpp +mainline inclusion [M] +from $mainline-version [M] +commit $id [M] +category: $category [M] +bugzilla: $bug-id [O] +CVE: $cve-id [O] + +additional changelog [O] + +-------------------------------- + +original changelog +Signed-off-by: $yourname <$yourname(a)huawei.com> [M] +($mainline-version could be mainline-3.5, mainline-3.6, etc...) +``` + +### Examples +------- + +```cpp +mainline inclusion +from mainline-4.10 +commit 0becc0ae5b42828785b589f686725ff5bc3b9b25 +category: bugfix +bugzilla: 3004 +CVE: N/A + +The patch fixes a BUG_ON in the product: Injecting a single bit ECC error to the memory before system boot using hardware inject tools will cause a large amount of CMCI during system booting . +[ 1.146580] mce: [Hardware Error]: Machine check events logged +[ 1.152908] ------------[ cut here ]------------ +[ 1.157751] kernel BUG at kernel/timer.c:951! +[ 1.162321] invalid opcode: 0000 [#1] SMP + +------------------------------------------------- + +original changelog + +<original S-O-B> +Signed-off-by: Zhang San <zhangsan(a)huawei.com> +Tested-by: Li Si <lisi(a)huawei.com> +``` + +### Email client - Thunderbird settings +------- + +If you are a new developer in the kernel community, it is highly recommended that you use the Thunderbird mail client. + +1. Thunderbird Installation + + Obtain the English version of Thunderbird from [http://www.mozilla.org/]( http://www.mozilla.org/) and install it on your system. + + Download URL: https://www.thunderbird.net/en-US/thunderbird/all/ + +2. Settings + + 2.1 Use the plain text format instead of the HTML format. + + Choose **Options > Account Settings > Composition & Addressing**, and do **NOT** select Compose message in HTML format. + + 2.2 Editor settings + + **Tools > Options> Advanced > Config editor** + + \- To bring up the Thunderbird's registry editor, set **mailnews.send_plaintext_flowed** to **false**. + + \- Disable HTML Format: Set **mail.identity.id1.compose_html** to **false**. + + \- Enable UTF-8: Set **prefs.converted-to-utf8** to **true**. + + \- View messages in UTF-8: Set **mailnews.view_default_charset** to **UTF-8**. + + \- Set **mailnews.wraplength** to **9999** to avoid auto-wrap. + +# Linux kernel +------- + +There are several guides for kernel developers and users, which can be rendered in a number of formats, like HTML and PDF. You can read **Documentation/admin-guide/README.rst** first. + +In order to build the documentation, use **make htmldocs** or **make pdfdocs**. The formatted documentation can also be read online at: https://www.kernel.org/doc/html/latest/ + +There are various text files in the Documentation/ subdirectory, several of which use the Restructured Text markup notation. See Documentation/00-INDEX for a list of what is contained in each file. + +Read the **Documentation/process/changes.rst** file, as it contains the requirements for building and running the kernel, and information about the problems that may be caused by upgrading your kernel. + -- 2.22.0

1 0

[PATCH openEuler-1.0-LTS v2 00/26] support psi feature
by Liu Xinpeng 28 Oct '21

28 Oct '21

backport psi feature and avoid kabi change bugzilla: https://gitee.com/openeuler/kernel/issues/I47QS2 Baruch Siach (1): psi: fix reference to kernel commandline enable Dan Schatzberg (1): kernel/sched/psi.c: expose pressure metrics on root cgroup Johannes Weiner (12): mm: workingset: tell cache transitions from workingset thrashing sched: loadavg: consolidate LOAD_INT, LOAD_FRAC, CALC_LOAD sched: loadavg: make calc_load_n() public sched: sched.h: make rq locking and clock functions available in stats.h sched: introduce this_rq_lock_irq() psi: pressure stall information for CPU, memory, and IO psi: cgroup support psi: make disabling/enabling easier for vendor kernels psi: fix aggregation idle shut-off psi: avoid divide-by-zero crash inside virtual machines fs: kernfs: add poll file operation sched/psi: Fix sampling error and rare div0 crashes with cgroups and high uptime Josef Bacik (1): blk-iolatency: use a percentile approache for ssd's Liu Xinpeng (2): psi:enable psi in config psi:avoid kabi change Miklos Szeredi (1): fuse: ignore PG_workingset after stealing Olof Johansson (1): kernel/sched/psi.c: simplify cgroup_move_task() Suren Baghdasaryan (6): psi: introduce state_mask to represent stalled psi states psi: make psi_enable static psi: rename psi fields in preparation for psi trigger addition psi: split update_stats into parts psi: track changed states include/: refactor headers to allow kthread.h inclusion in psi_types.h Yafang Shao (1): mm, memcg: add workingset_restore in memory.stat Documentation/accounting/psi.txt | 73 +++ Documentation/admin-guide/cgroup-v2.rst | 22 + Documentation/admin-guide/kernel-parameters.txt | 4 + arch/arm64/configs/openeuler_defconfig | 2 + arch/powerpc/platforms/cell/cpufreq_spudemand.c | 2 +- arch/powerpc/platforms/cell/spufs/sched.c | 9 +- arch/s390/appldata/appldata_os.c | 4 - arch/x86/configs/openeuler_defconfig | 2 + block/blk-iolatency.c | 183 +++++- drivers/cpuidle/governors/menu.c | 4 - drivers/spi/spi-rockchip.c | 1 + fs/fuse/dev.c | 1 + fs/kernfs/file.c | 31 +- fs/proc/loadavg.c | 3 - include/linux/cgroup-defs.h | 12 + include/linux/cgroup.h | 17 + include/linux/kernfs.h | 8 + include/linux/kthread.h | 4 + include/linux/mmzone.h | 3 + include/linux/page-flags.h | 5 + include/linux/psi.h | 55 ++ include/linux/psi_types.h | 95 +++ include/linux/sched.h | 13 + include/linux/sched/loadavg.h | 24 +- include/linux/swap.h | 1 + include/trace/events/mmflags.h | 1 + init/Kconfig | 28 + kernel/cgroup/cgroup.c | 55 +- kernel/debug/kdb/kdb_main.c | 7 +- kernel/fork.c | 4 + kernel/kthread.c | 3 + kernel/sched/Makefile | 1 + kernel/sched/core.c | 16 +- kernel/sched/loadavg.c | 139 ++-- kernel/sched/psi.c | 823 ++++++++++++++++++++++++ kernel/sched/sched.h | 178 ++--- kernel/sched/stats.h | 86 +++ kernel/workqueue.c | 23 + kernel/workqueue_internal.h | 6 +- mm/compaction.c | 5 + mm/filemap.c | 20 +- mm/huge_memory.c | 1 + mm/memcontrol.c | 2 + mm/migrate.c | 2 + mm/page_alloc.c | 9 + mm/swap_state.c | 1 + mm/vmscan.c | 10 + mm/vmstat.c | 1 + mm/workingset.c | 117 +++- 49 files changed, 1837 insertions(+), 279 deletions(-) create mode 100644 Documentation/accounting/psi.txt create mode 100644 include/linux/psi.h create mode 100644 include/linux/psi_types.h create mode 100644 kernel/sched/psi.c -- 1.8.3.1

1 25

[PATCH openEuler-1.0-LTS] config: update hulk_defconfig
by Yang Yingliang 28 Oct '21

28 Oct '21

hulk inclusion category: bugfix bugzilla: NA CVE: NA --------------------------- enable CONFIG_HISILICON_ERRATUM_1980005 by default for test. set default value of CONFIG_MMC_DW_IDMAC and CONFIG_MMC_DW_HI3XXX. Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/configs/hulk_defconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm64/configs/hulk_defconfig b/arch/arm64/configs/hulk_defconfig index b146c2e2a93dc..01e02aa2cb092 100644 --- a/arch/arm64/configs/hulk_defconfig +++ b/arch/arm64/configs/hulk_defconfig @@ -398,7 +398,7 @@ CONFIG_ARM64_ERRATUM_845719=y # CONFIG_QCOM_QDF2400_ERRATUM_0065 is not set # CONFIG_SOCIONEXT_SYNQUACER_PREITS is not set CONFIG_HISILICON_ERRATUM_161600802=y -# CONFIG_HISILICON_ERRATUM_1980005 is not set +CONFIG_HISILICON_ERRATUM_1980005=y # CONFIG_QCOM_FALKOR_ERRATUM_E1041 is not set CONFIG_HISILICON_ERRATUM_HIP08_RU_PREFETCH=y # CONFIG_HISILICON_HIP08_RU_PREFETCH_DEFAULT_OFF is not set @@ -4204,10 +4204,12 @@ CONFIG_MMC_SPI=m CONFIG_MMC_CB710=m CONFIG_MMC_VIA_SDMMC=m CONFIG_MMC_DW=m +# CONFIG_MMC_DW_IDMAC is not set CONFIG_MMC_DW_PLTFM=m CONFIG_MMC_DW_BLUEFIELD=m # CONFIG_MMC_DW_EXYNOS is not set # CONFIG_MMC_DW_HI3798CV200 is not set +# CONFIG_MMC_DW_HI3XXX is not set # CONFIG_MMC_DW_K3 is not set # CONFIG_MMC_DW_PCI is not set CONFIG_MMC_VUB300=m -- 2.25.1

1 0

[PATCH kernel-4.19 1/4] iommu/arm-smmu: Prevent forced unbinding of Arm SMMU drivers
by Yang Yingliang 28 Oct '21

28 Oct '21

From: Will Deacon <will(a)kernel.org> mainline inclusion from mainline-v5.5-rc1 commit 34debdca68efd5625a2fcea7df1a215591a01f80 category: bugfix bugzilla: 95382 CVE: NA ------------------------------------------------- Forcefully unbinding the Arm SMMU drivers is a pretty dangerous operation, since it will likely lead to catastrophic failure for any DMA devices mastering through the SMMU being unbound. When the driver then attempts to "handle" the fatal faults, it's very easy to trip over dead data structures, leading to use-after-free. On John's machine, he reports that the machine was "unusable" due to loss of the storage controller following a forced unbind of the SMMUv3 driver: | # cd ./bus/platform/drivers/arm-smmu-v3 | # echo arm-smmu-v3.0.auto > unbind | hisi_sas_v2_hw HISI0162:01: CQE_AXI_W_ERR (0x800) found! | platform arm-smmu-v3.0.auto: CMD_SYNC timeout at 0x00000146 | [hwprod 0x00000146, hwcons 0x00000000] Prevent this forced unbinding of the drivers by setting "suppress_bind_attrs" to true. Link: https://lore.kernel.org/lkml/06dfd385-1af0-3106-4cc5-6a5b8e864759@huawei.com Reported-by: John Garry <john.garry(a)huawei.com> Signed-off-by: Will Deacon <will(a)kernel.org> Tested-by: John Garry <john.garry(a)huawei.com> # smmu v3 Reviewed-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Joerg Roedel <jroedel(a)suse.de> Signed-off-by: Nanyong Sun <sunnanyong(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/iommu/arm-smmu-v3.c | 5 +++-- drivers/iommu/arm-smmu.c | 7 ++++--- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c index c9ff437cb3283..49408e73716e7 100644 --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -4532,8 +4532,9 @@ MODULE_DEVICE_TABLE(of, arm_smmu_of_match); static struct platform_driver arm_smmu_driver = { .driver = { - .name = "arm-smmu-v3", - .of_match_table = of_match_ptr(arm_smmu_of_match), + .name = "arm-smmu-v3", + .of_match_table = of_match_ptr(arm_smmu_of_match), + .suppress_bind_attrs = true, }, .probe = arm_smmu_device_probe, .remove = arm_smmu_device_remove, diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index f948de8af412c..2c2bdeac758e0 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -2287,9 +2287,10 @@ static SIMPLE_DEV_PM_OPS(arm_smmu_pm_ops, NULL, arm_smmu_pm_resume); static struct platform_driver arm_smmu_driver = { .driver = { - .name = "arm-smmu", - .of_match_table = of_match_ptr(arm_smmu_of_match), - .pm = &arm_smmu_pm_ops, + .name = "arm-smmu", + .of_match_table = of_match_ptr(arm_smmu_of_match), + .pm = &arm_smmu_pm_ops, + .suppress_bind_attrs = true, }, .probe = arm_smmu_device_probe, .remove = arm_smmu_device_remove, -- 2.25.1

2 4

[PATCH kernel-4.19 v6 00/23] support psi feature
by Liu Xinpeng 28 Oct '21

28 Oct '21

backport psi feature from upstream 5.4 bugzilla: https://gitee.com/openeuler/kernel/issues/I47QS2 Baruch Siach (1): psi: fix reference to kernel commandline enable Dan Schatzberg (1): kernel/sched/psi.c: expose pressure metrics on root cgroup Johannes Weiner (11): sched: loadavg: consolidate LOAD_INT, LOAD_FRAC, CALC_LOAD sched: loadavg: make calc_load_n() public sched: sched.h: make rq locking and clock functions available in stats.h sched: introduce this_rq_lock_irq() psi: pressure stall information for CPU, memory, and IO psi: cgroup support psi: make disabling/enabling easier for vendor kernels psi: fix aggregation idle shut-off psi: avoid divide-by-zero crash inside virtual machines fs: kernfs: add poll file operation sched/psi: Fix sampling error and rare div0 crashes with cgroups and high uptime Josef Bacik (1): blk-iolatency: use a percentile approache for ssd's Liu Xinpeng (2): psi:enable psi in config psi:avoid kabi change Olof Johansson (1): kernel/sched/psi.c: simplify cgroup_move_task() Suren Baghdasaryan (6): psi: introduce state_mask to represent stalled psi states psi: make psi_enable static psi: rename psi fields in preparation for psi trigger addition psi: split update_stats into parts psi: track changed states include/: refactor headers to allow kthread.h inclusion in psi_types.h Documentation/accounting/psi.txt | 73 +++ Documentation/admin-guide/cgroup-v2.rst | 18 + Documentation/admin-guide/kernel-parameters.txt | 4 + arch/arm64/configs/openeuler_defconfig | 2 + arch/powerpc/platforms/cell/cpufreq_spudemand.c | 2 +- arch/powerpc/platforms/cell/spufs/sched.c | 9 +- arch/s390/appldata/appldata_os.c | 4 - arch/x86/configs/openeuler_defconfig | 2 + block/blk-iolatency.c | 183 +++++- drivers/cpuidle/governors/menu.c | 4 - drivers/spi/spi-rockchip.c | 1 + fs/kernfs/file.c | 31 +- fs/proc/loadavg.c | 3 - include/linux/cgroup-defs.h | 12 + include/linux/cgroup.h | 17 + include/linux/kernfs.h | 8 + include/linux/kthread.h | 4 + include/linux/psi.h | 55 ++ include/linux/psi_types.h | 95 +++ include/linux/sched.h | 13 + include/linux/sched/loadavg.h | 24 +- init/Kconfig | 28 + kernel/cgroup/cgroup.c | 55 +- kernel/debug/kdb/kdb_main.c | 7 +- kernel/fork.c | 4 + kernel/kthread.c | 3 + kernel/sched/Makefile | 1 + kernel/sched/core.c | 16 +- kernel/sched/loadavg.c | 139 ++-- kernel/sched/psi.c | 823 ++++++++++++++++++++++++ kernel/sched/sched.h | 178 ++--- kernel/sched/stats.h | 86 +++ kernel/workqueue.c | 23 + kernel/workqueue_internal.h | 6 +- mm/compaction.c | 5 + mm/filemap.c | 11 + mm/page_alloc.c | 9 + mm/vmscan.c | 9 + 38 files changed, 1726 insertions(+), 241 deletions(-) create mode 100644 Documentation/accounting/psi.txt create mode 100644 include/linux/psi.h create mode 100644 include/linux/psi_types.h create mode 100644 kernel/sched/psi.c -- 1.8.3.1

2 24

[PATCH kernel-4.19 1/8] EMMC: ascend customized emmc host
by Yang Yingliang 28 Oct '21

28 Oct '21

From: zhangguijiang <zhangguijiang(a)huawei.com> ascend inclusion category: feature feature: Ascend emmc adaption bugzilla: https://gitee.com/openeuler/kernel/issues/I4F4LL CVE: NA -------------------- To identify Ascend HiSilicon emmc chip, we add a customized property to dts. In this patch we add an interface to read this property. At the same time, we provided a switch, which is CONFIG_ASCEND_HISI_MMC, for you to get rid of our modifications. Signed-off-by: zhangguijiang <zhangguijiang(a)huawei.com> Reviewed-by: Ding Tianhong <dingtianhong(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/mmc/Kconfig | 10 ++++ drivers/mmc/core/host.c | 43 ++++++++++++--- include/linux/mmc/host.h | 115 +++++++++++++++++++++++++++++++++++++++ include/linux/mmc/pm.h | 1 + 4 files changed, 162 insertions(+), 7 deletions(-) diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index ec21388311db2..8b29ecadd1862 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -12,6 +12,16 @@ menuconfig MMC If you want MMC/SD/SDIO support, you should say Y here and also to your specific host controller driver. +config ASCEND_HISI_MMC + bool "Ascend HiSilicon MMC card support" + depends on MMC + default n + help + This selects for Hisilicon SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. + You should select this option if you want mmc support on + Ascend platform. + if MMC source "drivers/mmc/core/Kconfig" diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index dd1c14d8f6863..b29ee31e7865e 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -348,6 +348,11 @@ int mmc_of_parse(struct mmc_host *host) EXPORT_SYMBOL(mmc_of_parse); +static inline int mmc_is_ascend_hi_mci_1(struct device *dev) +{ + return !strncmp(dev_name(dev), "hi_mci.1", strlen("hi_mci.1")); +} + /** * mmc_alloc_host - initialise the per-host structure. * @extra: sizeof private data structure @@ -374,7 +379,10 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) } host->index = err; - + if (mmc_is_ascend_customized(dev)) { + if (mmc_is_ascend_hi_mci_1(dev)) + host->index = 1; + } dev_set_name(&host->class_dev, "mmc%d", host->index); host->parent = dev; @@ -383,10 +391,11 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) device_initialize(&host->class_dev); device_enable_async_suspend(&host->class_dev); - if (mmc_gpio_alloc(host)) { - put_device(&host->class_dev); - return NULL; - } + if (!mmc_is_ascend_customized(host->parent)) + if (mmc_gpio_alloc(host)) { + put_device(&host->class_dev); + return NULL; + } spin_lock_init(&host->lock); init_waitqueue_head(&host->wq); @@ -439,7 +448,9 @@ int mmc_add_host(struct mmc_host *host) #endif mmc_start_host(host); - mmc_register_pm_notifier(host); + if (!mmc_is_ascend_customized(host->parent) || + !(host->pm_flags & MMC_PM_IGNORE_PM_NOTIFY)) + mmc_register_pm_notifier(host); return 0; } @@ -456,7 +467,9 @@ EXPORT_SYMBOL(mmc_add_host); */ void mmc_remove_host(struct mmc_host *host) { - mmc_unregister_pm_notifier(host); + if (!mmc_is_ascend_customized(host->parent) || + !(host->pm_flags & MMC_PM_IGNORE_PM_NOTIFY)) + mmc_unregister_pm_notifier(host); mmc_stop_host(host); #ifdef CONFIG_DEBUG_FS @@ -483,3 +496,19 @@ void mmc_free_host(struct mmc_host *host) } EXPORT_SYMBOL(mmc_free_host); + + +int mmc_is_ascend_customized(struct device *dev) +{ +#ifdef CONFIG_ASCEND_HISI_MMC + static int is_ascend_customized = -1; + + if (is_ascend_customized == -1) + is_ascend_customized = ((dev == NULL) ? 0 : + of_find_property(dev->of_node, "customized", NULL) != NULL); + return is_ascend_customized; +#else + return 0; +#endif +} +EXPORT_SYMBOL(mmc_is_ascend_customized); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 7e8e5b20e82b0..2cd5a73ab12a2 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -19,6 +19,9 @@ #include <linux/mmc/pm.h> #include <linux/dma-direction.h> +#include <linux/jiffies.h> +#include <linux/version.h> + struct mmc_ios { unsigned int clock; /* clock rate */ unsigned short vdd; @@ -63,6 +66,7 @@ struct mmc_ios { #define MMC_TIMING_MMC_DDR52 8 #define MMC_TIMING_MMC_HS200 9 #define MMC_TIMING_MMC_HS400 10 +#define MMC_TIMING_NEW_SD MMC_TIMING_UHS_SDR12 unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */ @@ -78,7 +82,25 @@ struct mmc_ios { #define MMC_SET_DRIVER_TYPE_D 3 bool enhanced_strobe; /* hs400es selection */ +#ifdef CONFIG_ASCEND_HISI_MMC + unsigned int clock_store; /*store the clock before power off*/ +#endif +}; + +#ifdef CONFIG_ASCEND_HISI_MMC +struct mmc_cmdq_host_ops { + int (*enable)(struct mmc_host *mmc); + int (*disable)(struct mmc_host *mmc, bool soft); + int (*restore_irqs)(struct mmc_host *mmc); + int (*request)(struct mmc_host *mmc, struct mmc_request *mrq); + int (*halt)(struct mmc_host *mmc, bool halt); + void (*post_req)(struct mmc_host *mmc, struct mmc_request *mrq, + int err); + void (*disable_immediately)(struct mmc_host *mmc); + int (*clear_and_halt)(struct mmc_host *mmc); }; +#endif + struct mmc_host; @@ -168,6 +190,12 @@ struct mmc_host_ops { */ int (*multi_io_quirk)(struct mmc_card *card, unsigned int direction, int blk_size); +#ifdef CONFIG_ASCEND_HISI_MMC + /* Slow down clk for ascend chip SD cards */ + void (*slowdown_clk)(struct mmc_host *host, int timing); + int (*enable_enhanced_strobe)(struct mmc_host *host); + int (*send_cmd_direct)(struct mmc_host *host, struct mmc_request *mrq); +#endif }; struct mmc_cqe_ops { @@ -255,6 +283,30 @@ struct mmc_context_info { wait_queue_head_t wait; }; +#ifdef CONFIG_ASCEND_HISI_MMC +/** + * mmc_cmdq_context_info - describes the contexts of cmdq + * @active_reqs requests being processed + * @active_dcmd dcmd in progress, don't issue any + * more dcmd requests + * @rpmb_in_wait do not pull any more reqs till rpmb is handled + * @cmdq_state state of cmdq engine + * @req_starved completion should invoke the request_fn since + * no tags were available + * @cmdq_ctx_lock acquire this before accessing this structure + */ +struct mmc_cmdq_context_info { + unsigned long active_reqs; /* in-flight requests */ + bool active_dcmd; + bool rpmb_in_wait; + unsigned long curr_state; + + /* no free tag available */ + unsigned long req_starved; + spinlock_t cmdq_ctx_lock; +}; +#endif + struct regulator; struct mmc_pwrseq; @@ -328,6 +380,9 @@ struct mmc_host { #define MMC_CAP_UHS_SDR50 (1 << 18) /* Host supports UHS SDR50 mode */ #define MMC_CAP_UHS_SDR104 (1 << 19) /* Host supports UHS SDR104 mode */ #define MMC_CAP_UHS_DDR50 (1 << 20) /* Host supports UHS DDR50 mode */ +#ifdef CONFIG_ASCEND_HISI_MMC +#define MMC_CAP_RUNTIME_RESUME (1 << 20) /* Resume at runtime_resume. */ +#endif #define MMC_CAP_UHS (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | \ MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | \ MMC_CAP_UHS_DDR50) @@ -368,6 +423,34 @@ struct mmc_host { #define MMC_CAP2_CQE (1 << 23) /* Has eMMC command queue engine */ #define MMC_CAP2_CQE_DCMD (1 << 24) /* CQE can issue a direct command */ #define MMC_CAP2_AVOID_3_3V (1 << 25) /* Host must negotiate down from 3.3V */ +#ifdef CONFIG_ASCEND_HISI_MMC +#define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache control */ +#define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock read don't work */ +#define MMC_CAP2_NO_SLEEP_CMD (1 << 4) /* Don't allow sleep command */ +#define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */ +#define MMC_CAP2_DETECT_ON_ERR (1 << 8) /* I/O err check card removal */ +#define MMC_CAP2_HC_ERASE_SZ (1 << 9) /* High-capacity erase size */ +#define MMC_CAP2_PACKED_RD (1 << 12) /* Allow packed read */ +#define MMC_CAP2_PACKED_WR (1 << 13) /* Allow packed write */ +#define MMC_CAP2_PACKED_CMD (MMC_CAP2_PACKED_RD | \ + MMC_CAP2_PACKED_WR) +#define MMC_CAP2_CMD_QUEUE (1 << 18) /* support eMMC command queue */ +#define MMC_CAP2_ENHANCED_STROBE (1 << 19) +#define MMC_CAP2_CACHE_FLUSH_BARRIER (1 << 20) +/* Allow background operations auto enable control */ +#define MMC_CAP2_BKOPS_AUTO_CTRL (1 << 21) +/* Allow background operations manual enable control */ +#define MMC_CAP2_BKOPS_MANUAL_CTRL (1 << 22) + +/* host is connected by via modem through sdio */ +#define MMC_CAP2_SUPPORT_VIA_MODEM (1 << 26) +/* host is connected by wifi through sdio */ +#define MMC_CAP2_SUPPORT_WIFI (1 << 27) +/* host is connected to 1102 wifi */ +#define MMC_CAP2_SUPPORT_WIFI_CMD11 (1 << 28) +/* host do not support low power for wifi*/ +#define MMC_CAP2_WIFI_NO_LOWPWR (1 << 29) +#endif int fixed_drv_type; /* fixed driver type for non-removable media */ @@ -461,6 +544,12 @@ struct mmc_host { bool cqe_on; unsigned long private[0] ____cacheline_aligned; +#ifdef CONFIG_ASCEND_HISI_MMC + const struct mmc_cmdq_host_ops *cmdq_ops; + int sdio_present; + unsigned int cmdq_slots; + struct mmc_cmdq_context_info cmdq_ctx; +#endif }; struct device_node; @@ -588,4 +677,30 @@ static inline enum dma_data_direction mmc_get_dma_dir(struct mmc_data *data) int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error); int mmc_abort_tuning(struct mmc_host *host, u32 opcode); +#ifdef CONFIG_ASCEND_HISI_MMC +int mmc_cache_ctrl(struct mmc_host *host, u8 enable); +int mmc_card_awake(struct mmc_host *host); +int mmc_card_sleep(struct mmc_host *host); +int mmc_card_can_sleep(struct mmc_host *host); +#else +static inline int mmc_cache_ctrl(struct mmc_host *host, u8 enable) +{ + return 0; +} +static inline int mmc_card_awake(struct mmc_host *host) +{ + return 0; +} +static inline int mmc_card_sleep(struct mmc_host *host) +{ + return 0; +} +static inline int mmc_card_can_sleep(struct mmc_host *host) +{ + return 0; +} +#endif + +int mmc_is_ascend_customized(struct device *dev); + #endif /* LINUX_MMC_HOST_H */ diff --git a/include/linux/mmc/pm.h b/include/linux/mmc/pm.h index 4a139204c20c0..6e2d6a135c7e0 100644 --- a/include/linux/mmc/pm.h +++ b/include/linux/mmc/pm.h @@ -26,5 +26,6 @@ typedef unsigned int mmc_pm_flag_t; #define MMC_PM_KEEP_POWER (1 << 0) /* preserve card power during suspend */ #define MMC_PM_WAKE_SDIO_IRQ (1 << 1) /* wake up host system on SDIO IRQ assertion */ +#define MMC_PM_IGNORE_PM_NOTIFY (1 << 2) /* ignore mmc pm notify */ #endif /* LINUX_MMC_PM_H */ -- 2.25.1

1 7

[PATCH openEuler-1.0-LTS 1/8] EMMC: ascend customized emmc host
by Yang Yingliang 27 Oct '21

27 Oct '21

From: zhangguijiang <zhangguijiang(a)huawei.com> ascend inclusion category: feature feature: Ascend emmc adaption bugzilla: https://gitee.com/openeuler/kernel/issues/I4F4LL CVE: NA -------------------- To identify Ascend HiSilicon emmc chip, we add a customized property to dts. In this patch we add an interface to read this property. At the same time, we provided a switch, which is CONFIG_ASCEND_HISI_MMC, for you to get rid of our modifications. Signed-off-by: zhangguijiang <zhangguijiang(a)huawei.com> Reviewed-by: Ding Tianhong <dingtianhong(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/mmc/Kconfig | 10 ++++ drivers/mmc/core/host.c | 47 +++++++++++++--- include/linux/mmc/host.h | 115 +++++++++++++++++++++++++++++++++++++++ include/linux/mmc/pm.h | 1 + 4 files changed, 164 insertions(+), 9 deletions(-) diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index ec21388311db2..8b29ecadd1862 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -12,6 +12,16 @@ menuconfig MMC If you want MMC/SD/SDIO support, you should say Y here and also to your specific host controller driver. +config ASCEND_HISI_MMC + bool "Ascend HiSilicon MMC card support" + depends on MMC + default n + help + This selects for Hisilicon SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. + You should select this option if you want mmc support on + Ascend platform. + if MMC source "drivers/mmc/core/Kconfig" diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index f57f5de542064..69cc778706855 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -348,6 +348,11 @@ int mmc_of_parse(struct mmc_host *host) EXPORT_SYMBOL(mmc_of_parse); +static inline int mmc_is_ascend_hi_mci_1(struct device *dev) +{ + return !strncmp(dev_name(dev), "hi_mci.1", strlen("hi_mci.1")); +} + /** * mmc_alloc_host - initialise the per-host structure. * @extra: sizeof private data structure @@ -374,7 +379,10 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) } host->index = err; - + if (mmc_is_ascend_customized(dev)) { + if (mmc_is_ascend_hi_mci_1(dev)) + host->index = 1; + } dev_set_name(&host->class_dev, "mmc%d", host->index); host->parent = dev; @@ -383,12 +391,13 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) device_initialize(&host->class_dev); device_enable_async_suspend(&host->class_dev); - if (mmc_gpio_alloc(host)) { - put_device(&host->class_dev); - ida_simple_remove(&mmc_host_ida, host->index); - kfree(host); - return NULL; - } + if (!mmc_is_ascend_customized(host->parent)) + if (mmc_gpio_alloc(host)) { + put_device(&host->class_dev); + ida_simple_remove(&mmc_host_ida, host->index); + kfree(host); + return NULL; + } spin_lock_init(&host->lock); init_waitqueue_head(&host->wq); @@ -441,7 +450,9 @@ int mmc_add_host(struct mmc_host *host) #endif mmc_start_host(host); - mmc_register_pm_notifier(host); + if (!mmc_is_ascend_customized(host->parent) || + !(host->pm_flags & MMC_PM_IGNORE_PM_NOTIFY)) + mmc_register_pm_notifier(host); return 0; } @@ -458,7 +469,9 @@ EXPORT_SYMBOL(mmc_add_host); */ void mmc_remove_host(struct mmc_host *host) { - mmc_unregister_pm_notifier(host); + if (!mmc_is_ascend_customized(host->parent) || + !(host->pm_flags & MMC_PM_IGNORE_PM_NOTIFY)) + mmc_unregister_pm_notifier(host); mmc_stop_host(host); #ifdef CONFIG_DEBUG_FS @@ -485,3 +498,19 @@ void mmc_free_host(struct mmc_host *host) } EXPORT_SYMBOL(mmc_free_host); + + +int mmc_is_ascend_customized(struct device *dev) +{ +#ifdef CONFIG_ASCEND_HISI_MMC + static int is_ascend_customized = -1; + + if (is_ascend_customized == -1) + is_ascend_customized = ((dev == NULL) ? 0 : + of_find_property(dev->of_node, "customized", NULL) != NULL); + return is_ascend_customized; +#else + return 0; +#endif +} +EXPORT_SYMBOL(mmc_is_ascend_customized); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 840462ed1ec7e..78b4d0a813b71 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -19,6 +19,9 @@ #include <linux/mmc/pm.h> #include <linux/dma-direction.h> +#include <linux/jiffies.h> +#include <linux/version.h> + struct mmc_ios { unsigned int clock; /* clock rate */ unsigned short vdd; @@ -63,6 +66,7 @@ struct mmc_ios { #define MMC_TIMING_MMC_DDR52 8 #define MMC_TIMING_MMC_HS200 9 #define MMC_TIMING_MMC_HS400 10 +#define MMC_TIMING_NEW_SD MMC_TIMING_UHS_SDR12 unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */ @@ -78,7 +82,25 @@ struct mmc_ios { #define MMC_SET_DRIVER_TYPE_D 3 bool enhanced_strobe; /* hs400es selection */ +#ifdef CONFIG_ASCEND_HISI_MMC + unsigned int clock_store; /*store the clock before power off*/ +#endif +}; + +#ifdef CONFIG_ASCEND_HISI_MMC +struct mmc_cmdq_host_ops { + int (*enable)(struct mmc_host *mmc); + int (*disable)(struct mmc_host *mmc, bool soft); + int (*restore_irqs)(struct mmc_host *mmc); + int (*request)(struct mmc_host *mmc, struct mmc_request *mrq); + int (*halt)(struct mmc_host *mmc, bool halt); + void (*post_req)(struct mmc_host *mmc, struct mmc_request *mrq, + int err); + void (*disable_immediately)(struct mmc_host *mmc); + int (*clear_and_halt)(struct mmc_host *mmc); }; +#endif + struct mmc_host; @@ -168,6 +190,12 @@ struct mmc_host_ops { */ int (*multi_io_quirk)(struct mmc_card *card, unsigned int direction, int blk_size); +#ifdef CONFIG_ASCEND_HISI_MMC + /* Slow down clk for ascend chip SD cards */ + void (*slowdown_clk)(struct mmc_host *host, int timing); + int (*enable_enhanced_strobe)(struct mmc_host *host); + int (*send_cmd_direct)(struct mmc_host *host, struct mmc_request *mrq); +#endif }; struct mmc_cqe_ops { @@ -255,6 +283,30 @@ struct mmc_context_info { wait_queue_head_t wait; }; +#ifdef CONFIG_ASCEND_HISI_MMC +/** + * mmc_cmdq_context_info - describes the contexts of cmdq + * @active_reqs requests being processed + * @active_dcmd dcmd in progress, don't issue any + * more dcmd requests + * @rpmb_in_wait do not pull any more reqs till rpmb is handled + * @cmdq_state state of cmdq engine + * @req_starved completion should invoke the request_fn since + * no tags were available + * @cmdq_ctx_lock acquire this before accessing this structure + */ +struct mmc_cmdq_context_info { + unsigned long active_reqs; /* in-flight requests */ + bool active_dcmd; + bool rpmb_in_wait; + unsigned long curr_state; + + /* no free tag available */ + unsigned long req_starved; + spinlock_t cmdq_ctx_lock; +}; +#endif + struct regulator; struct mmc_pwrseq; @@ -328,6 +380,9 @@ struct mmc_host { #define MMC_CAP_UHS_SDR50 (1 << 18) /* Host supports UHS SDR50 mode */ #define MMC_CAP_UHS_SDR104 (1 << 19) /* Host supports UHS SDR104 mode */ #define MMC_CAP_UHS_DDR50 (1 << 20) /* Host supports UHS DDR50 mode */ +#ifdef CONFIG_ASCEND_HISI_MMC +#define MMC_CAP_RUNTIME_RESUME (1 << 20) /* Resume at runtime_resume. */ +#endif #define MMC_CAP_UHS (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | \ MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | \ MMC_CAP_UHS_DDR50) @@ -367,6 +422,34 @@ struct mmc_host { #define MMC_CAP2_CQE (1 << 23) /* Has eMMC command queue engine */ #define MMC_CAP2_CQE_DCMD (1 << 24) /* CQE can issue a direct command */ #define MMC_CAP2_AVOID_3_3V (1 << 25) /* Host must negotiate down from 3.3V */ +#ifdef CONFIG_ASCEND_HISI_MMC +#define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache control */ +#define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock read don't work */ +#define MMC_CAP2_NO_SLEEP_CMD (1 << 4) /* Don't allow sleep command */ +#define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */ +#define MMC_CAP2_DETECT_ON_ERR (1 << 8) /* I/O err check card removal */ +#define MMC_CAP2_HC_ERASE_SZ (1 << 9) /* High-capacity erase size */ +#define MMC_CAP2_PACKED_RD (1 << 12) /* Allow packed read */ +#define MMC_CAP2_PACKED_WR (1 << 13) /* Allow packed write */ +#define MMC_CAP2_PACKED_CMD (MMC_CAP2_PACKED_RD | \ + MMC_CAP2_PACKED_WR) +#define MMC_CAP2_CMD_QUEUE (1 << 18) /* support eMMC command queue */ +#define MMC_CAP2_ENHANCED_STROBE (1 << 19) +#define MMC_CAP2_CACHE_FLUSH_BARRIER (1 << 20) +/* Allow background operations auto enable control */ +#define MMC_CAP2_BKOPS_AUTO_CTRL (1 << 21) +/* Allow background operations manual enable control */ +#define MMC_CAP2_BKOPS_MANUAL_CTRL (1 << 22) + +/* host is connected by via modem through sdio */ +#define MMC_CAP2_SUPPORT_VIA_MODEM (1 << 26) +/* host is connected by wifi through sdio */ +#define MMC_CAP2_SUPPORT_WIFI (1 << 27) +/* host is connected to 1102 wifi */ +#define MMC_CAP2_SUPPORT_WIFI_CMD11 (1 << 28) +/* host do not support low power for wifi*/ +#define MMC_CAP2_WIFI_NO_LOWPWR (1 << 29) +#endif int fixed_drv_type; /* fixed driver type for non-removable media */ @@ -460,6 +543,12 @@ struct mmc_host { bool cqe_on; unsigned long private[0] ____cacheline_aligned; +#ifdef CONFIG_ASCEND_HISI_MMC + const struct mmc_cmdq_host_ops *cmdq_ops; + int sdio_present; + unsigned int cmdq_slots; + struct mmc_cmdq_context_info cmdq_ctx; +#endif }; struct device_node; @@ -587,4 +676,30 @@ static inline enum dma_data_direction mmc_get_dma_dir(struct mmc_data *data) int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error); int mmc_abort_tuning(struct mmc_host *host, u32 opcode); +#ifdef CONFIG_ASCEND_HISI_MMC +int mmc_cache_ctrl(struct mmc_host *host, u8 enable); +int mmc_card_awake(struct mmc_host *host); +int mmc_card_sleep(struct mmc_host *host); +int mmc_card_can_sleep(struct mmc_host *host); +#else +static inline int mmc_cache_ctrl(struct mmc_host *host, u8 enable) +{ + return 0; +} +static inline int mmc_card_awake(struct mmc_host *host) +{ + return 0; +} +static inline int mmc_card_sleep(struct mmc_host *host) +{ + return 0; +} +static inline int mmc_card_can_sleep(struct mmc_host *host) +{ + return 0; +} +#endif + +int mmc_is_ascend_customized(struct device *dev); + #endif /* LINUX_MMC_HOST_H */ diff --git a/include/linux/mmc/pm.h b/include/linux/mmc/pm.h index 4a139204c20c0..6e2d6a135c7e0 100644 --- a/include/linux/mmc/pm.h +++ b/include/linux/mmc/pm.h @@ -26,5 +26,6 @@ typedef unsigned int mmc_pm_flag_t; #define MMC_PM_KEEP_POWER (1 << 0) /* preserve card power during suspend */ #define MMC_PM_WAKE_SDIO_IRQ (1 << 1) /* wake up host system on SDIO IRQ assertion */ +#define MMC_PM_IGNORE_PM_NOTIFY (1 << 2) /* ignore mmc pm notify */ #endif /* LINUX_MMC_PM_H */ -- 2.25.1

1 7

[PATCH openEuler-21.03 00/37] 补丁合入创新分支告知
by Wang ShaoBo 27 Oct '21

27 Oct '21

首先非常感谢大家参与openEuler社区，并给openEuler kernel开源项目提补丁。 openEuler kernel开源项目的openEuler-21.03创新分支以更加开阔的视野接纳企业，高校以及所有爱好和关注Linux内核人士的想法和建议，期望和大家共同探索底层软件在构建云与计算、5G、终端等全场景下的前景和潜力，共同推动底软在物联网、智能计算背景下的全新视界；另外openEuler-21.03创新分支同时希望给高校提供更多的教学素材，为高校基础研究和产教结合道路奉献绵薄之力。 - 如果您对如何参与openEuler kernel开源项目有疑问，可以发邮件至bobo.shaobowang(a)huawei.com, 也可以参考文档：https://mp.weixin.qq.com/s/a42a5VfayFeJgWitqbI8Qw - 您也可以通过openEuler kernel官网提交issue: https://gitee.com/openeuler/kernel 以下补丁已经过社区maintainer review和openEuler社区的验证测试，将合入到openEuler-21.03分支5.10.0-4.25.0版本。 0ee74f5aa533 (HEAD -> openEuler-21.03, tag: 5.10.0-4.25.0) RDS tcp loopback connection can hang fc7ec5aebb45 usb: gadget: f_fs: Ensure io_completion_wq is idle during unbind dae6a368dafc ALSA: seq: Fix race of snd_seq_timer_open() 3a00695cb8e2 RDMA/mlx4: Do not map the core_clock page to user space unless enabled ed4fd7c42adc Revert "ACPI: sleep: Put the FACS table after using it" 37c85837cf42 ASoC: Intel: bytcr_rt5640: Add quirk for the Glavey TM800A550L tablet 94fccf25dd49 nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME 47f090fbcbb9 regulator: fan53880: Fix missing n_voltages setting 0b9b74807478 net/nfc/rawsock.c: fix a permission check bug 789459f344e7 scsi: core: Only put parent device if host state differs from SHOST_CREATED 08f8e0fb4b59 usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path 0e2bd1220f8a phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe() 47f3671cfd67 usb: pd: Set PD_T_SINK_WAIT_CAP to 310ms 559b80a5925d scsi: core: Fix failure handling of scsi_add_host_with_dma() e897c103ecde ALSA: hda/realtek: headphone and mic don't work on an Acer laptop d39b22f602f5 isdn: mISDN: netjet: Fix crash in nj_probe: 1013d6a98975 nvmet: fix false keep-alive timeout when a controller is torn down 9ffec7fff577 cgroup: disable controllers at parse time e2c4bbd88218 RDMA/ipoib: Fix warning caused by destroying non-initial netns 0eb3e33d9814 gpio: wcd934x: Fix shift-out-of-bounds error af64e02cb927 NFSv4: Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode() 34a0d49e311d usb: dwc3: ep0: fix NULL pointer exception ca5ed7b6d2ac spi: bcm2835: Fix out-of-bounds access with more than 4 slaves 420a6301307e NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error. 762e6acf28f1 regulator: core: resolve supply for boot-on/always-on regulators d84eb5070d03 net: macb: ensure the device is available before accessing GEMGXL control registers b9a3b65556e9 sched/fair: Make sure to update tg contrib for blocked load 074babe38e68 KVM: x86: Ensure liveliness of nested VM-Enter fail tracepoint message 447f10de04c8 ALSA: firewire-lib: fix the context to call snd_pcm_stop_xrun() 262986c9f618 dm verity: fix require_signatures module_param permissions bfa96859a312 usb: chipidea: udc: assign interrupt number to USB gadget structure 177f5f81e9fc regulator: max77620: Use device_set_of_node_from_dev() 818f49a8aa09 USB: serial: omninet: add device id for Zyxel Omni 56K Plus 1790bfdad278 spi: Cleanup on failure of initial setup 642b2258a1f7 drm/msm/a6xx: avoid shadow NULL reference in failure path be1c43cba161 USB: f_ncm: ncm_bitrate (speed) is unsigned e41037151205 nvme-fabrics: decode host pathing error for connect 期待后续合作。 Alexandre GRIVEAUX (1): USB: serial: omninet: add device id for Zyxel Omni 56K Plus Axel Lin (1): regulator: fan53880: Fix missing n_voltages setting Dai Ngo (1): NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error. Dmitry Baryshkov (1): regulator: core: resolve supply for boot-on/always-on regulators Dmitry Osipenko (1): regulator: max77620: Use device_set_of_node_from_dev() Hannes Reinecke (1): nvme-fabrics: decode host pathing error for connect Hans de Goede (1): ASoC: Intel: bytcr_rt5640: Add quirk for the Glavey TM800A550L tablet Hui Wang (1): ALSA: hda/realtek: headphone and mic don't work on an Acer laptop Jeimon (1): net/nfc/rawsock.c: fix a permission check bug John Keeping (1): dm verity: fix require_signatures module_param permissions Jonathan Marek (1): drm/msm/a6xx: avoid shadow NULL reference in failure path Kamal Heib (1): RDMA/ipoib: Fix warning caused by destroying non-initial netns Kyle Tso (1): usb: pd: Set PD_T_SINK_WAIT_CAP to 310ms Li Jun (1): usb: chipidea: udc: assign interrupt number to USB gadget structure Lukas Wunner (2): spi: Cleanup on failure of initial setup spi: bcm2835: Fix out-of-bounds access with more than 4 slaves Maciej Żenczykowski (1): USB: f_ncm: ncm_bitrate (speed) is unsigned Marian-Cristian Rotariu (1): usb: dwc3: ep0: fix NULL pointer exception Mayank Rana (1): usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path Ming Lei (2): scsi: core: Fix failure handling of scsi_add_host_with_dma() scsi: core: Only put parent device if host state differs from SHOST_CREATED Rao Shoaib (1): RDS tcp loopback connection can hang Sagi Grimberg (2): nvmet: fix false keep-alive timeout when a controller is torn down nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME Sean Christopherson (1): KVM: x86: Ensure liveliness of nested VM-Enter fail tracepoint message Shakeel Butt (1): cgroup: disable controllers at parse time Shay Drory (1): RDMA/mlx4: Do not map the core_clock page to user space unless enabled Srinivas Kandagatla (1): gpio: wcd934x: Fix shift-out-of-bounds error Takashi Iwai (1): ALSA: seq: Fix race of snd_seq_timer_open() Takashi Sakamoto (1): ALSA: firewire-lib: fix the context to call snd_pcm_stop_xrun() Trond Myklebust (1): NFSv4: Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode() Vincent Guittot (1): sched/fair: Make sure to update tg contrib for blocked load Wang Wensheng (1): phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe() Wesley Cheng (1): usb: gadget: f_fs: Ensure io_completion_wq is idle during unbind Zhang Rui (1): Revert "ACPI: sleep: Put the FACS table after using it" Zheyu Ma (1): isdn: mISDN: netjet: Fix crash in nj_probe: Zong Li (1): net: macb: ensure the device is available before accessing GEMGXL control registers arch/x86/kvm/trace.h | 6 ++-- drivers/acpi/sleep.c | 4 +-- drivers/gpio/gpio-wcd934x.c | 2 +- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 2 +- drivers/infiniband/hw/mlx4/main.c | 5 +-- drivers/infiniband/ulp/ipoib/ipoib_netlink.c | 1 + drivers/isdn/hardware/mISDN/netjet.c | 1 - drivers/md/dm-verity-verify-sig.c | 2 +- drivers/net/ethernet/cadence/macb_main.c | 3 ++ drivers/net/ethernet/mellanox/mlx4/fw.c | 3 ++ drivers/net/ethernet/mellanox/mlx4/fw.h | 1 + drivers/net/ethernet/mellanox/mlx4/main.c | 6 ++++ drivers/nvme/host/Kconfig | 3 +- drivers/nvme/host/fabrics.c | 5 +++ drivers/nvme/target/core.c | 15 ++++++--- drivers/nvme/target/nvmet.h | 2 +- drivers/phy/cadence/phy-cadence-sierra.c | 1 + drivers/regulator/core.c | 6 ++++ drivers/regulator/fan53880.c | 3 ++ drivers/regulator/max77620-regulator.c | 7 +++++ drivers/scsi/hosts.c | 16 +++++----- drivers/spi/spi-bcm2835.c | 10 ++++-- drivers/spi/spi-bitbang.c | 18 ++++++++--- drivers/spi/spi-fsl-spi.c | 4 +++ drivers/spi/spi-omap-uwire.c | 9 +++++- drivers/spi/spi-omap2-mcspi.c | 33 ++++++++++++-------- drivers/spi/spi-pxa2xx.c | 9 +++++- drivers/usb/chipidea/udc.c | 1 + drivers/usb/dwc3/ep0.c | 3 ++ drivers/usb/gadget/function/f_fs.c | 3 ++ drivers/usb/gadget/function/f_ncm.c | 2 +- drivers/usb/serial/omninet.c | 2 ++ drivers/usb/typec/ucsi/ucsi.c | 1 + fs/nfs/nfs4_fs.h | 1 + fs/nfs/nfs4proc.c | 20 +++++++++++- include/linux/mlx4/device.h | 1 + include/linux/usb/pd.h | 2 +- kernel/cgroup/cgroup.c | 13 ++++---- kernel/sched/fair.c | 2 +- net/nfc/rawsock.c | 2 +- net/rds/connection.c | 23 ++++++++++---- net/rds/tcp.c | 4 +-- net/rds/tcp.h | 3 +- net/rds/tcp_listen.c | 6 ++++ sound/core/seq/seq_timer.c | 10 +++++- sound/firewire/amdtp-stream.c | 2 +- sound/pci/hda/patch_realtek.c | 12 +++++++ sound/soc/intel/boards/bytcr_rt5640.c | 11 +++++++ 48 files changed, 228 insertions(+), 73 deletions(-) -- 2.25.1

1 37

[PATCH] Add the limit on page cache
by wenzhiwei 27 Oct '21

27 Oct '21

kylin inclusion category: feature bugfix: https://gitee.com/openeuler-competition/summer-2021/issues/I3EIMT?from=proj… CVE: NA -------------------------------------------------- In some atomic operation scenarios, such as interrupt context, it is not possible to sleep. Therefore, when memory allocation in this scenario, it will not enter the direct_reclaim link, and will not even wake up the kswapd process. For example, in the soft interrupt processing function of the network card receiving packets, there may be a phenomenon that the page cache is too occupied and the remaining memory of the system is insufficient, and the memory cannot be allocated for the received data packet, and the packet is directly lost. This is the problem to be solved by the page cache limit. The page cache limit is mainly used to detect whether the page cache exceeds the upper limit we set (/proc/sys/vm/pagecache_limit_ratio) when the page cache is added to the application (that is, when the add_to_page_cache_lru function is called) Provides 3 /proc interfaces, respectively: echo x > /proc/sys/vm/pagecache_limit_ratio（0 < x < 100）:Enable page cache limit function x means limit the percentage of page cache to the total system memory /proc/sys/vm/pagecache_limit_ignore_dirty :Whether to ignore dirty pages when calculating the memory occupied by the page cache. The default value is 1, which means ignore. Because the recycling of dirty pages is time-consuming. /proc/sys/vm/pagecache_limit_async:1 means asynchronous recycling, 0 means synchronous recycling signed-off-by: wen zhiwei <wenzhiwei(a)kylinos.cn> Signed-off-by: wenzhiwei <wenzhiwei(a)kylinos.cn> --- include/linux/memcontrol.h | 7 +- include/linux/mmzone.h | 7 + include/linux/swap.h | 15 + include/trace/events/vmscan.h | 28 +- kernel/sysctl.c | 139 ++++++++ mm/filemap.c | 2 + mm/page_alloc.c | 52 +++ mm/vmscan.c | 650 ++++++++++++++++++++++++++++++++-- mm/workingset.c | 1 + 9 files changed, 862 insertions(+), 39 deletions(-) diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 71a5b589bddb..731a2cd2ea86 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -50,6 +50,7 @@ enum memcg_memory_event { struct mem_cgroup_reclaim_cookie { pg_data_t *pgdat; + int priority; unsigned int generation; }; @@ -492,8 +493,7 @@ mem_cgroup_nodeinfo(struct mem_cgroup *memcg, int nid) * @node combination. This can be the node lruvec, if the memory * controller is disabled. */ -static inline struct lruvec *mem_cgroup_lruvec(struct mem_cgroup *memcg, - struct pglist_data *pgdat) +static inline struct lruvec *mem_cgroup_lruvec(struct mem_cgroup *memcg, struct pglist_data *pgdat) { struct mem_cgroup_per_node *mz; struct lruvec *lruvec; @@ -1066,8 +1066,7 @@ static inline void mem_cgroup_migrate(struct page *old, struct page *new) { } -static inline struct lruvec *mem_cgroup_lruvec(struct mem_cgroup *memcg, - struct pglist_data *pgdat) +static inline struct lruvec *mem_cgroup_lruvec(struct mem_cgroup *memcg, struct pglist_data *pgdat) { return &pgdat->__lruvec; } diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 82fceef88448..d3c5258e5d0d 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -445,6 +445,13 @@ struct zone { * changes. */ long lowmem_reserve[MAX_NR_ZONES]; + /* + * This atomic counter is set when there is pagecache limit + * reclaim going on on this particular zone. Other potential + * reclaiers should back off to prevent from heavy lru_lock + * bouncing. + */ + atomic_t pagecache_reclaim; #ifdef CONFIG_NEED_MULTIPLE_NODES int node; diff --git a/include/linux/swap.h b/include/linux/swap.h index 9b708c0288bc..b9329e575836 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -377,6 +377,21 @@ extern unsigned long mem_cgroup_shrink_node(struct mem_cgroup *mem, unsigned long *nr_scanned); extern unsigned long shrink_all_memory(unsigned long nr_pages); extern int vm_swappiness; + +#define ADDITIONAL_RECLAIM_RATIO 2 +extern unsigned long pagecache_over_limit(void); +extern void shrink_page_cache(gfp_t mask, struct page *page); +extern unsigned long vm_pagecache_limit_pages; +extern unsigned long vm_pagecache_limit_reclaim_pages; +extern int unsigned vm_pagecache_limit_ratio; +extern int vm_pagecache_limit_reclaim_ratio; +extern unsigned int vm_pagecache_ignore_dirty; +extern unsigned long pagecache_over_limit(void); +extern unsigned int vm_pagecache_limit_async; +extern int kpagecache_limitd_run(void); +extern void kpagecache_limitd_stop(void); +extern unsigned int vm_pagecache_ignore_slab; + extern int remove_mapping(struct address_space *mapping, struct page *page); extern unsigned long reclaim_pages(struct list_head *page_list); diff --git a/include/trace/events/vmscan.h b/include/trace/events/vmscan.h index 2070df64958e..3bfe47a85f6f 100644 --- a/include/trace/events/vmscan.h +++ b/include/trace/events/vmscan.h @@ -183,48 +183,48 @@ DEFINE_EVENT(mm_vmscan_direct_reclaim_end_template, mm_vmscan_memcg_softlimit_re #endif /* CONFIG_MEMCG */ TRACE_EVENT(mm_shrink_slab_start, - TP_PROTO(struct shrinker *shr, struct shrink_control *sc, - long nr_objects_to_shrink, unsigned long cache_items, - unsigned long long delta, unsigned long total_scan, - int priority), - - TP_ARGS(shr, sc, nr_objects_to_shrink, cache_items, delta, total_scan, - priority), + TP_PROTO(struct shrinker *shr, struct shrink_control *sc, + long nr_objects_to_shrink,unsigned long pgs_scanned, + unsigned long lru_pgs, unsigned long cache_items, + unsigned long long delta, unsigned long total_scan), + TP_ARGS(shr, sc, nr_objects_to_shrink,pgs_scanned, lru_pgs, cache_items, delta, total_scan), TP_STRUCT__entry( __field(struct shrinker *, shr) __field(void *, shrink) __field(int, nid) __field(long, nr_objects_to_shrink) __field(gfp_t, gfp_flags) + __field(unsigned long, pgs_scanned) + __field(unsigned long, lru_pgs) __field(unsigned long, cache_items) __field(unsigned long long, delta) __field(unsigned long, total_scan) - __field(int, priority) ), TP_fast_assign( - __entry->shr = shr; + __entry->shr = shr; __entry->shrink = shr->scan_objects; __entry->nid = sc->nid; __entry->nr_objects_to_shrink = nr_objects_to_shrink; __entry->gfp_flags = sc->gfp_mask; + __entry->pgs_scanned = pgs_scanned; + __entry->lru_pgs = lru_pgs; __entry->cache_items = cache_items; __entry->delta = delta; __entry->total_scan = total_scan; - __entry->priority = priority; ), - - TP_printk("%pS %p: nid: %d objects to shrink %ld gfp_flags %s cache items %ld delta %lld total_scan %ld priority %d", +TP_printk("%pF %p: nid: %d objects to shrink %ld gfp_flags %s pgs_scanned %ld lru_pgs %ld cache items %ld delta %lld total_scan %ld", __entry->shrink, __entry->shr, __entry->nid, __entry->nr_objects_to_shrink, show_gfp_flags(__entry->gfp_flags), + __entry->pgs_scanned, + __entry->lru_pgs, __entry->cache_items, __entry->delta, - __entry->total_scan, - __entry->priority) + __entry->total_scan) ); TRACE_EVENT(mm_shrink_slab_end, diff --git a/kernel/sysctl.c b/kernel/sysctl.c index c7ca58de3b1b..4ef436cdfdad 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -111,6 +111,7 @@ static int sixty = 60; #endif +static int zero; static int __maybe_unused neg_one = -1; static int __maybe_unused two = 2; static int __maybe_unused four = 4; @@ -648,6 +649,68 @@ static int do_proc_dointvec(struct ctl_table *table, int write, return __do_proc_dointvec(table->data, table, write, buffer, lenp, ppos, conv, data); } +int setup_pagecache_limit(void) +{ + /* reclaim $ADDITIONAL_RECLAIM_PAGES more than limit. */ + vm_pagecache_limit_reclaim_ratio = vm_pagecache_limit_ratio + ADDITIONAL_RECLAIM_RATIO; + + if (vm_pagecache_limit_reclaim_ratio > 100) + vm_pagecache_limit_reclaim_ratio = 100; + if (vm_pagecache_limit_ratio == 0) + vm_pagecache_limit_reclaim_ratio = 0; + + vm_pagecache_limit_pages = vm_pagecache_limit_ratio * totalram_pages() / 100; + vm_pagecache_limit_reclaim_pages = vm_pagecache_limit_reclaim_ratio * totalram_pages() / 100; + return 0; +} + +static int pc_limit_proc_dointvec(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos); + if (write && !ret) + ret = setup_pagecache_limit(); + return ret; +} +static int pc_reclaim_limit_proc_dointvec(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + int pre_reclaim_ratio = vm_pagecache_limit_reclaim_ratio; + int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos); + + if (write && vm_pagecache_limit_ratio == 0) + return -EINVAL; + + if (write && !ret) { + if (vm_pagecache_limit_reclaim_ratio - vm_pagecache_limit_ratio < ADDITIONAL_RECLAIM_RATIO) { + vm_pagecache_limit_reclaim_ratio = pre_reclaim_ratio; + return -EINVAL; + } + vm_pagecache_limit_reclaim_pages = vm_pagecache_limit_reclaim_ratio * totalram_pages() / 100; + } + return ret; +} +static int pc_limit_async_handler(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos); + + if (write && vm_pagecache_limit_ratio == 0) + return -EINVAL; + + if (write && !ret) { + if (vm_pagecache_limit_async > 0) { + if (kpagecache_limitd_run()) { + vm_pagecache_limit_async = 0; + return -EINVAL; + } + } + else { + kpagecache_limitd_stop(); + } + } + return ret; +} static int do_proc_douintvec_w(unsigned int *tbl_data, struct ctl_table *table, @@ -2711,6 +2774,14 @@ static struct ctl_table kern_table[] = { }, { } }; +static int pc_limit_proc_dointvec(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos); + +static int pc_reclaim_limit_proc_dointvec(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos); + +static int pc_limit_async_handler(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos); static struct ctl_table vm_table[] = { { @@ -2833,6 +2904,74 @@ static struct ctl_table vm_table[] = { .extra1 = SYSCTL_ZERO, .extra2 = &two_hundred, }, + { + .procname = "pagecache_limit_ratio", + .data = &vm_pagecache_limit_ratio, + .maxlen = sizeof(vm_pagecache_limit_ratio), + .mode = 0644, + .proc_handler = &pc_limit_proc_dointvec, + .extra1 = &zero, + .extra2 = &one_hundred, + }, + { + .procname = "pagecache_limit_reclaim_ratio", + .data = &vm_pagecache_limit_reclaim_ratio, + .maxlen = sizeof(vm_pagecache_limit_reclaim_ratio), + .mode = 0644, + .proc_handler = &pc_reclaim_limit_proc_dointvec, + .extra1 = &zero, + .extra2 = &one_hundred, + }, + { + .procname = "pagecache_limit_ignore_dirty", + .data = &vm_pagecache_ignore_dirty, + .maxlen = sizeof(vm_pagecache_ignore_dirty), + .mode = 0644, + .proc_handler = &proc_dointvec, + }, +#ifdef CONFIG_SHRINK_PAGECACHE + { + .procname = "cache_reclaim_s", + .data = &vm_cache_reclaim_s, + .maxlen = sizeof(vm_cache_reclaim_s), + .mode = 0644, + .proc_handler = cache_reclaim_sysctl_handler, + .extra1 = &vm_cache_reclaim_s_min, + .extra2 = &vm_cache_reclaim_s_max, + }, + { + .procname = "cache_reclaim_weight", + .data = &vm_cache_reclaim_weight, + .maxlen = sizeof(vm_cache_reclaim_weight), + .mode = 0644, + .proc_handler = proc_dointvec_minmax, + .extra1 = &vm_cache_reclaim_weight_min, + .extra2 = &vm_cache_reclaim_weight_max, + }, + { + .procname = "cache_reclaim_enable", + .data = &vm_cache_reclaim_enable, + .maxlen = sizeof(vm_cache_reclaim_enable), + .mode = 0644, + .proc_handler = cache_reclaim_enable_handler, + .extra1 = &zero, + .extra2 = &one, + }, + { + .procname = "pagecache_limit_async", + .data = &vm_pagecache_limit_async, + .maxlen = sizeof(vm_pagecache_limit_async), + .mode = 0644, + .proc_handler = &pc_limit_async_handler, + }, + { + .procname = "pagecache_limit_ignore_slab", + .data = &vm_pagecache_ignore_slab, + .maxlen = sizeof(vm_pagecache_ignore_slab), + .mode = 0644, + .proc_handler = &proc_dointvec, + }, +#endif #ifdef CONFIG_HUGETLB_PAGE { .procname = "nr_hugepages", diff --git a/mm/filemap.c b/mm/filemap.c index ef611eb34aa7..808d4f02b5a5 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -922,6 +922,8 @@ int add_to_page_cache_lru(struct page *page, struct address_space *mapping, { void *shadow = NULL; int ret; + if (unlikely(vm_pagecache_limit_pages) && pagecache_over_limit() > 0) + shrink_page_cache(gfp_mask, page); __SetPageLocked(page); ret = __add_to_page_cache_locked(page, mapping, offset, diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 71afec177233..08feba42d3d7 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -8933,6 +8933,58 @@ void zone_pcp_reset(struct zone *zone) local_irq_restore(flags); } +/* Returns a number that's positive if the pagecache is above + * the set limit*/ +unsigned long pagecache_over_limit() +{ + unsigned long should_reclaim_pages = 0; + unsigned long overlimit_pages = 0; + unsigned long delta_pages = 0; + unsigned long pgcache_lru_pages = 0; + /* We only want to limit unmapped and non-shmem page cache pages; + * normally all shmem pages are mapped as well*/ + unsigned long pgcache_pages = global_node_page_state(NR_FILE_PAGES) + - max_t(unsigned long, + global_node_page_state(NR_FILE_MAPPED), + global_node_page_state(NR_SHMEM)); + /* We certainly can't free more than what's on the LRU lists + * minus the dirty ones*/ + if (vm_pagecache_ignore_slab) + pgcache_lru_pages = global_node_page_state(NR_ACTIVE_FILE) + + global_node_page_state(NR_INACTIVE_FILE); + else + pgcache_lru_pages = global_node_page_state(NR_ACTIVE_FILE) + + global_node_page_state(NR_INACTIVE_FILE) + + global_node_page_state(NR_SLAB_RECLAIMABLE_B) + + global_node_page_state(NR_SLAB_UNRECLAIMABLE_B); + + if (vm_pagecache_ignore_dirty != 0) + pgcache_lru_pages -= global_node_page_state(NR_FILE_DIRTY) / vm_pagecache_ignore_dirty; + /* Paranoia */ + if (unlikely(pgcache_lru_pages > LONG_MAX)) + return 0; + + /* Limit it to 94% of LRU (not all there might be unmapped) */ + pgcache_lru_pages -= pgcache_lru_pages/16; + if (vm_pagecache_ignore_slab) + pgcache_pages = min_t(unsigned long, pgcache_pages, pgcache_lru_pages); + else + pgcache_pages = pgcache_lru_pages; + + /* + *delta_pages: we should reclaim at least 2% more pages than overlimit_page, values get from + * /proc/vm/pagecache_limit_reclaim_pages + *should_reclaim_pages: the real pages we will reclaim, but it should less than pgcache_pages; + */ + if (pgcache_pages > vm_pagecache_limit_pages) { + overlimit_pages = pgcache_pages - vm_pagecache_limit_pages; + delta_pages = vm_pagecache_limit_reclaim_pages - vm_pagecache_limit_pages; + should_reclaim_pages = min_t(unsigned long, delta_pages, vm_pagecache_limit_pages) + overlimit_pages; + return should_reclaim_pages; + } + return 0; +} + #ifdef CONFIG_MEMORY_HOTREMOVE /* * All pages in the range must be in a single zone, must not contain holes, diff --git a/mm/vmscan.c b/mm/vmscan.c index 23f8a5242de7..1fe2c74a1c10 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -175,6 +175,39 @@ struct scan_control { */ int vm_swappiness = 60; +/* + * The total number of pages which are beyond the high watermark within all + * zones. + */ +unsigned long vm_pagecache_limit_pages __read_mostly = 0; +unsigned long vm_pagecache_limit_reclaim_pages = 0; +unsigned int vm_pagecache_limit_ratio __read_mostly = 0; +int vm_pagecache_limit_reclaim_ratio __read_mostly = 0; +unsigned int vm_pagecache_ignore_dirty __read_mostly = 1; + +unsigned long vm_total_pages; +static struct task_struct *kpclimitd = NULL; +unsigned int vm_pagecache_ignore_slab __read_mostly = 1; +unsigned int vm_pagecache_limit_async __read_mostly = 0; + +#ifdef CONFIG_SHRINK_PAGECACHE +unsigned long vm_cache_limit_ratio; +unsigned long vm_cache_limit_ratio_min; +unsigned long vm_cache_limit_ratio_max; +unsigned long vm_cache_limit_mbytes __read_mostly; +unsigned long vm_cache_limit_mbytes_min; +unsigned long vm_cache_limit_mbytes_max; +static bool kpclimitd_context = false; +int vm_cache_reclaim_s __read_mostly; +int vm_cache_reclaim_s_min; +int vm_cache_reclaim_s_max; +int vm_cache_reclaim_weight __read_mostly; +int vm_cache_reclaim_weight_min; +int vm_cache_reclaim_weight_max; +int vm_cache_reclaim_enable; +static DEFINE_PER_CPU(struct delayed_work, vmscan_work); +#endif + static void set_task_reclaim_state(struct task_struct *task, struct reclaim_state *rs) { @@ -187,10 +220,12 @@ static void set_task_reclaim_state(struct task_struct *task, task->reclaim_state = rs; } +static bool kpclimitd_context = false; static LIST_HEAD(shrinker_list); static DECLARE_RWSEM(shrinker_rwsem); #ifdef CONFIG_MEMCG +static DEFINE_IDR(shrinker_idr); static int shrinker_nr_max; /* The shrinker_info is expanded in a batch of BITS_PER_LONG */ @@ -346,7 +381,6 @@ void set_shrinker_bit(struct mem_cgroup *memcg, int nid, int shrinker_id) } } -static DEFINE_IDR(shrinker_idr); static int prealloc_memcg_shrinker(struct shrinker *shrinker) { @@ -646,7 +680,9 @@ EXPORT_SYMBOL(unregister_shrinker); #define SHRINK_BATCH 128 static unsigned long do_shrink_slab(struct shrink_control *shrinkctl, - struct shrinker *shrinker, int priority) + struct shrinker *shrinker, + unsigned long nr_scanned, + unsigned long nr_eligible) { unsigned long freed = 0; unsigned long long delta; @@ -670,8 +706,10 @@ static unsigned long do_shrink_slab(struct shrink_control *shrinkctl, nr = xchg_nr_deferred(shrinker, shrinkctl); if (shrinker->seeks) { - delta = freeable >> priority; - delta *= 4; + //delta = freeable >> priority; + //delta *= 4; + delta = (4 * nr_scanned) / shrinker->seeks; + delta *= freeable; do_div(delta, shrinker->seeks); } else { /* @@ -682,12 +720,12 @@ static unsigned long do_shrink_slab(struct shrink_control *shrinkctl, delta = freeable / 2; } - total_scan = nr >> priority; + total_scan = nr; total_scan += delta; total_scan = min(total_scan, (2 * freeable)); trace_mm_shrink_slab_start(shrinker, shrinkctl, nr, - freeable, delta, total_scan, priority); + freeable, delta, total_scan, nr_scanned,nr_eligible); /* * Normally, we should not scan less than batch_size objects in one @@ -744,7 +782,7 @@ static unsigned long do_shrink_slab(struct shrink_control *shrinkctl, #ifdef CONFIG_MEMCG static unsigned long shrink_slab_memcg(gfp_t gfp_mask, int nid, - struct mem_cgroup *memcg, int priority) + struct mem_cgroup *memcg, unsigned long nr_scanned, unsigned long nr_eligible) { struct shrinker_info *info; unsigned long ret, freed = 0; @@ -780,7 +818,7 @@ static unsigned long shrink_slab_memcg(gfp_t gfp_mask, int nid, !(shrinker->flags & SHRINKER_NONSLAB)) continue; - ret = do_shrink_slab(&sc, shrinker, priority); + ret = do_shrink_slab(&sc, shrinker, nr_scanned, nr_eligible); if (ret == SHRINK_EMPTY) { clear_bit(i, info->map); /* @@ -799,7 +837,7 @@ static unsigned long shrink_slab_memcg(gfp_t gfp_mask, int nid, * set_bit() do_shrink_slab() */ smp_mb__after_atomic(); - ret = do_shrink_slab(&sc, shrinker, priority); + ret = do_shrink_slab(&sc, shrinker, nr_scanned, nr_eligible); if (ret == SHRINK_EMPTY) ret = 0; else @@ -846,7 +884,8 @@ static unsigned long shrink_slab_memcg(gfp_t gfp_mask, int nid, */ static unsigned long shrink_slab(gfp_t gfp_mask, int nid, struct mem_cgroup *memcg, - int priority) + unsigned long nr_scanned, + unsigned long nr_eligible) { unsigned long ret, freed = 0; struct shrinker *shrinker; @@ -859,7 +898,8 @@ static unsigned long shrink_slab(gfp_t gfp_mask, int nid, * oom. */ if (!mem_cgroup_disabled() && !mem_cgroup_is_root(memcg)) - return shrink_slab_memcg(gfp_mask, nid, memcg, priority); + return 0; + // return shrink_slab_memcg(gfp_mask, nid, memcg, priority); if (!down_read_trylock(&shrinker_rwsem)) goto out; @@ -871,7 +911,14 @@ static unsigned long shrink_slab(gfp_t gfp_mask, int nid, .memcg = memcg, }; - ret = do_shrink_slab(&sc, shrinker, priority); + if (memcg_kmem_enabled() && + !!memcg != !!(shrinker->flags & SHRINKER_MEMCG_AWARE)) + continue; + + if (!(shrinker->flags & SHRINKER_NUMA_AWARE)) + sc.nid = 0; + + ret = do_shrink_slab(&sc, shrinker, nr_scanned, nr_eligible); if (ret == SHRINK_EMPTY) ret = 0; freed += ret; @@ -905,7 +952,7 @@ void drop_slab_node(int nid) freed = 0; memcg = mem_cgroup_iter(NULL, NULL, NULL); do { - freed += shrink_slab(GFP_KERNEL, nid, memcg, 0); + freed += shrink_slab(GFP_KERNEL, nid, memcg, 1000,1000); } while ((memcg = mem_cgroup_iter(NULL, memcg, NULL)) != NULL); } while (freed > 10); } @@ -2369,7 +2416,7 @@ unsigned long reclaim_pages(struct list_head *page_list) EXPORT_SYMBOL_GPL(reclaim_pages); static unsigned long shrink_list(enum lru_list lru, unsigned long nr_to_scan, - struct lruvec *lruvec, struct scan_control *sc) + struct lruvec *lruvec, struct mem_cgroup *memcg, struct scan_control *sc) { if (is_active_lru(lru)) { if (sc->may_deactivate & (1 << is_file_lru(lru))) @@ -2683,7 +2730,7 @@ static void shrink_lruvec(struct lruvec *lruvec, struct scan_control *sc) nr[lru] -= nr_to_scan; nr_reclaimed += shrink_list(lru, nr_to_scan, - lruvec, sc); + lruvec, NULL, sc); } } @@ -2836,7 +2883,7 @@ static void shrink_node_memcgs(pg_data_t *pgdat, struct scan_control *sc) struct lruvec *lruvec = mem_cgroup_lruvec(memcg, pgdat); unsigned long reclaimed; unsigned long scanned; - + unsigned long lru_pages; /* * This loop can become CPU-bound when target memcgs * aren't eligible for reclaim - either because they @@ -2873,7 +2920,8 @@ static void shrink_node_memcgs(pg_data_t *pgdat, struct scan_control *sc) shrink_lruvec(lruvec, sc); shrink_slab(sc->gfp_mask, pgdat->node_id, memcg, - sc->priority); + sc->nr_scanned - scanned, + lru_pages); /* Record the group's reclaim efficiency */ vmpressure(sc->gfp_mask, memcg, false, @@ -3202,6 +3250,7 @@ static void shrink_zones(struct zonelist *zonelist, struct scan_control *sc) static void snapshot_refaults(struct mem_cgroup *target_memcg, pg_data_t *pgdat) { + struct mem_cgroup *memcg; struct lruvec *target_lruvec; unsigned long refaults; @@ -3273,8 +3322,7 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist, if (cgroup_reclaim(sc)) { struct lruvec *lruvec; - lruvec = mem_cgroup_lruvec(sc->target_mem_cgroup, - zone->zone_pgdat); + lruvec = mem_cgroup_lruvec(sc->target_mem_cgroup, zone->zone_pgdat); clear_bit(LRUVEC_CONGESTED, &lruvec->flags); } } @@ -3745,6 +3793,8 @@ static bool kswapd_shrink_node(pg_data_t *pgdat, return sc->nr_scanned >= sc->nr_to_reclaim; } +static void __shrink_page_cache(gfp_t mask); + /* * For kswapd, balance_pgdat() will reclaim pages across a node from zones * that are eligible for use by the caller until at least one zone is @@ -4208,6 +4258,27 @@ void wakeup_kswapd(struct zone *zone, gfp_t gfp_flags, int order, wake_up_interruptible(&pgdat->kswapd_wait); } +/* + * The reclaimable count would be mostly accurate. + * The less reclaimable pages may be + * - mlocked pages, which will be moved to unevictable list when encountered + * - mapped pages, which may require several travels to be reclaimed + * - dirty pages, which is not "instantly" reclaimable + */ + +static unsigned long global_reclaimable_pages(void) +{ + int nr; + + nr = global_node_page_state(NR_ACTIVE_FILE) + + global_node_page_state(NR_INACTIVE_FILE); + + if (get_nr_swap_pages() > 0) + nr += global_node_page_state(NR_ACTIVE_ANON) + + global_node_page_state(NR_INACTIVE_ANON); + return nr; +} + #ifdef CONFIG_HIBERNATION /* * Try to free `nr_to_reclaim' of memory, system-wide, and return the number of @@ -4246,6 +4317,498 @@ unsigned long shrink_all_memory(unsigned long nr_to_reclaim) return nr_reclaimed; } #endif /* CONFIG_HIBERNATION */ +/* + * Returns non-zero if the lock has been acquired, false if somebody + * else is holding the lock. + */ +static int pagecache_reclaim_lock_zone(struct zone *zone) +{ + return atomic_add_unless(&zone->pagecache_reclaim, 1, 1); +} + +static void pagecache_reclaim_unlock_zone(struct zone *zone) +{ + BUG_ON(atomic_dec_return(&zone->pagecache_reclaim)); +} + +/* + * Potential page cache reclaimers who are not able to take + * reclaim lock on any zone are sleeping on this waitqueue. + * So this is basically a congestion wait queue for them. + */ +DECLARE_WAIT_QUEUE_HEAD(pagecache_reclaim_wq); +DECLARE_WAIT_QUEUE_HEAD(kpagecache_limitd_wq); + +/* + * Similar to shrink_zone but it has a different consumer - pagecache limit + * so we cannot reuse the original function - and we do not want to clobber + * that code path so we have to live with this code duplication. + * + * In short this simply scans through the given lru for all cgroups for the + * give zone. + * + * returns true if we managed to cumulatively reclaim (via nr_reclaimed) + * the given nr_to_reclaim pages, false otherwise. The caller knows that + * it doesn't have to touch other zones if the target was hit already. + * + * DO NOT USE OUTSIDE of shrink_all_zones unless you have a really really + * really good reason. + */ + +static bool shrink_zone_per_memcg(struct zone *zone, enum lru_list lru, + unsigned long nr_to_scan, unsigned long nr_to_reclaim, + unsigned long *nr_reclaimed, struct scan_control *sc) +{ + struct mem_cgroup *root = sc->target_mem_cgroup; + struct mem_cgroup *memcg; + struct mem_cgroup_reclaim_cookie reclaim = { + .pgdat = zone->zone_pgdat, + .priority = sc->priority, + }; + + memcg = mem_cgroup_iter(root, NULL, &reclaim); + do { + struct lruvec *lruvec; + + lruvec = mem_cgroup_lruvec(memcg, zone->zone_pgdat); + *nr_reclaimed += shrink_list(lru, nr_to_scan, lruvec, memcg, sc); + if (*nr_reclaimed >= nr_to_reclaim) { + mem_cgroup_iter_break(root, memcg); + return true; + } + memcg = mem_cgroup_iter(root, memcg, &reclaim); + } while (memcg); + + return false; +} +/* + * Tries to reclaim 'nr_pages' pages from LRU lists system-wide, for given + * pass. + * + * For pass > 3 we also try to shrink the LRU lists that contain a few pages + * + * Returns the number of scanned zones. + */ +static int shrink_all_zones(unsigned long nr_pages, int pass, + struct scan_control *sc) +{ + struct zone *zone; + unsigned long nr_reclaimed = 0; + unsigned int nr_locked_zones = 0; + DEFINE_WAIT(wait); + + prepare_to_wait(&pagecache_reclaim_wq, &wait, TASK_INTERRUPTIBLE); + + for_each_populated_zone(zone) { + enum lru_list lru; + + /* + * Back off if somebody is already reclaiming this zone + * for the pagecache reclaim. + */ + if (!pagecache_reclaim_lock_zone(zone)) + continue; + + + /* + * This reclaimer might scan a zone so it will never + * sleep on pagecache_reclaim_wq + */ + finish_wait(&pagecache_reclaim_wq, &wait); + nr_locked_zones++; + + for_each_evictable_lru(lru) { + enum zone_stat_item ls = NR_ZONE_LRU_BASE + lru; + unsigned long lru_pages = zone_page_state(zone, ls); + + /* For pass = 0, we don't shrink the active list */ + if (pass == 0 && (lru == LRU_ACTIVE_ANON || + lru == LRU_ACTIVE_FILE)) + continue; + + /* Original code relied on nr_saved_scan which is no + * longer present so we are just considering LRU pages. + * This means that the zone has to have quite large + * LRU list for default priority and minimum nr_pages + * size (8*SWAP_CLUSTER_MAX). In the end we will tend + * to reclaim more from large zones wrt. small. + * This should be OK because shrink_page_cache is called + * when we are getting to short memory condition so + * LRUs tend to be large. + */ + if (((lru_pages >> sc->priority) + 1) >= nr_pages || pass >= 3) { + unsigned long nr_to_scan; + + nr_to_scan = min(nr_pages, lru_pages); + + /* + * A bit of a hack but the code has always been + * updating sc->nr_reclaimed once per shrink_all_zones + * rather than accumulating it for all calls to shrink + * lru. This costs us an additional argument to + * shrink_zone_per_memcg but well... + * + * Let's stick with this for bug-to-bug compatibility + */ + while (nr_to_scan > 0) { + /* shrink_list takes lru_lock with IRQ off so we + * should be careful about really huge nr_to_scan + */ + unsigned long batch = min_t(unsigned long, nr_to_scan, SWAP_CLUSTER_MAX); + + if (shrink_zone_per_memcg(zone, lru, + batch, nr_pages, &nr_reclaimed, sc)) { + pagecache_reclaim_unlock_zone(zone); + goto out_wakeup; + } + nr_to_scan -= batch; + } + } + } + pagecache_reclaim_unlock_zone(zone); + } + /* + * We have to go to sleep because all the zones are already reclaimed. + * One of the reclaimer will wake us up or __shrink_page_cache will + * do it if there is nothing to be done. + */ + if (!nr_locked_zones) { + if (!kpclimitd_context) + schedule(); + finish_wait(&pagecache_reclaim_wq, &wait); + goto out; + } + +out_wakeup: + wake_up_interruptible(&pagecache_reclaim_wq); + sc->nr_reclaimed += nr_reclaimed; +out: + return nr_locked_zones; +} + +/* + * Function to shrink the page cache + * + * This function calculates the number of pages (nr_pages) the page + * cache is over its limit and shrinks the page cache accordingly. + * + * The maximum number of pages, the page cache shrinks in one call of + * this function is limited to SWAP_CLUSTER_MAX pages. Therefore it may + * require a number of calls to actually reach the vm_pagecache_limit_kb. + * + * This function is similar to shrink_all_memory, except that it may never + * swap out mapped pages and only does four passes. + */ +static void __shrink_page_cache(gfp_t mask) +{ + unsigned long ret = 0; + int pass = 0; + struct reclaim_state reclaim_state; + struct scan_control sc = { + .gfp_mask = mask, + .may_swap = 0, + .may_unmap = 0, + .may_writepage = 0, + .target_mem_cgroup = NULL, + .reclaim_idx = MAX_NR_ZONES, + }; + struct reclaim_state *old_rs = current->reclaim_state; + long nr_pages; + + /* We might sleep during direct reclaim so make atomic context + * is certainly a bug. + */ + BUG_ON(!(mask & __GFP_RECLAIM)); + +retry: + /* How many pages are we over the limit?*/ + nr_pages = pagecache_over_limit(); + + /* + * Return early if there's no work to do. + * Wake up reclaimers that couldn't scan any zone due to congestion. + * There is apparently nothing to do so they do not have to sleep. + * This makes sure that no sleeping reclaimer will stay behind. + * Allow breaching the limit if the task is on the way out. + */ + if (nr_pages <= 0 || fatal_signal_pending(current)) { + wake_up_interruptible(&pagecache_reclaim_wq); + goto out; + } + + /* But do a few at least */ + nr_pages = max_t(unsigned long, nr_pages, 8*SWAP_CLUSTER_MAX); + + current->reclaim_state = &reclaim_state; + + /* + * Shrink the LRU in 4 passes: + * 0 = Reclaim from inactive_list only (fast) + * 1 = Reclaim from active list but don't reclaim mapped and dirtied (not that fast) + * 2 = Reclaim from active list but don't reclaim mapped (2nd pass) + * it may reclaim dirtied if vm_pagecache_ignore_dirty = 0 + * 3 = same as pass 2, but it will reclaim some few pages , detail in shrink_all_zones + */ + for (; pass <= 3; pass++) { + for (sc.priority = DEF_PRIORITY; sc.priority >= 0; sc.priority--) { + unsigned long nr_to_scan = nr_pages - ret; + struct mem_cgroup *memcg = NULL; + int nid; + + sc.nr_scanned = 0; + + /* + * No zone reclaimed because of too many reclaimers. Retry whether + * there is still something to do + */ + if (!shrink_all_zones(nr_to_scan, pass, &sc)) + goto retry; + + ret += sc.nr_reclaimed; + if (ret >= nr_pages) + goto out; + + reclaim_state.reclaimed_slab = 0; + for_each_online_node(nid) { + do { + shrink_slab(mask, nid, memcg, sc.nr_scanned, + global_reclaimable_pages()); + } while ((memcg = mem_cgroup_iter(NULL, memcg, NULL)) != NULL); + } + ret += reclaim_state.reclaimed_slab; + + if (ret >= nr_pages) + goto out; + + } + if (pass == 1) { + if (vm_pagecache_ignore_dirty == 1 || + (mask & (__GFP_IO | __GFP_FS)) != (__GFP_IO | __GFP_FS) ) + break; + else + sc.may_writepage = 1; + } + } + +out: + current->reclaim_state = old_rs; +} + +#ifdef CONFIG_SHRINK_PAGECACHE +static unsigned long __shrink_page_cache(gfp_t mask) +{ + struct scan_control sc = { + .gfp_mask = current_gfp_context(mask), + .reclaim_idx = gfp_zone(mask), + .may_writepage = !laptop_mode, + .nr_to_reclaim = SWAP_CLUSTER_MAX * + (unsigned long)vm_cache_reclaim_weight, + .may_unmap = 1, + .may_swap = 1, + .order = 0, + .priority = DEF_PRIORITY, + .target_mem_cgroup = NULL, + .nodemask = NULL, + }; + + struct zonelist *zonelist = node_zonelist(numa_node_id(), mask); + + return do_try_to_free_pages(zonelist, &sc); +} + + +static void shrink_page_cache_work(struct work_struct *w); +static void shrink_shepherd(struct work_struct *w); +static DECLARE_DEFERRABLE_WORK(shepherd, shrink_shepherd); + +static void shrink_shepherd(struct work_struct *w) +{ + int cpu; + + get_online_cpus(); + + for_each_online_cpu(cpu) { + struct delayed_work *work = &per_cpu(vmscan_work, cpu); + + if (!delayed_work_pending(work) && vm_cache_reclaim_enable) + queue_delayed_work_on(cpu, system_wq, work, 0); + } + + put_online_cpus(); + + /* we want all kernel thread to stop */ + if (vm_cache_reclaim_enable) { + if (vm_cache_reclaim_s == 0) + schedule_delayed_work(&shepherd, + round_jiffies_relative(120 * HZ)); + else + schedule_delayed_work(&shepherd, + round_jiffies_relative((unsigned long) + vm_cache_reclaim_s * HZ)); + } +} +static void shrink_shepherd_timer(void) +{ + int cpu; + + for_each_possible_cpu(cpu) { + struct delayed_work *work = &per_cpu(vmscan_work, cpu); + + INIT_DEFERRABLE_WORK(work, shrink_page_cache_work); + } + + schedule_delayed_work(&shepherd, + round_jiffies_relative((unsigned long)vm_cache_reclaim_s * HZ)); +} + +unsigned long shrink_page_cache(gfp_t mask) +{ + unsigned long nr_pages; + + /* We reclaim the highmem zone too, it is useful for 32bit arch */ + nr_pages = __shrink_page_cache(mask | __GFP_HIGHMEM); + + return nr_pages; +} +static void shrink_page_cache_work(struct work_struct *w) +{ + struct delayed_work *work = to_delayed_work(w); + unsigned long nr_pages; + + /* + * if vm_cache_reclaim_enable or vm_cache_reclaim_s is zero, + * we do not shrink page cache again. + */ + if (vm_cache_reclaim_s == 0 || !vm_cache_reclaim_enable) + return; + + /* It should wait more time if we hardly reclaim the page cache */ + nr_pages = shrink_page_cache(GFP_KERNEL); + if ((nr_pages < SWAP_CLUSTER_MAX) && vm_cache_reclaim_enable) + queue_delayed_work_on(smp_processor_id(), system_wq, work, + round_jiffies_relative(120 * HZ)); +} + +static void shrink_page_cache_init(void) +{ + vm_cache_limit_ratio = 0; + vm_cache_limit_ratio_min = 0; + vm_cache_limit_ratio_max = 100; + vm_cache_limit_mbytes = 0; + vm_cache_limit_mbytes_min = 0; + vm_cache_limit_mbytes_max = totalram_pages >> (20 - PAGE_SHIFT); + vm_cache_reclaim_s = 0; + vm_cache_reclaim_s_min = 0; + vm_cache_reclaim_s_max = 43200; + vm_cache_reclaim_weight = 1; + vm_cache_reclaim_weight_min = 1; + vm_cache_reclaim_weight_max = 100; + vm_cache_reclaim_enable = 1; + + shrink_shepherd_timer(); +} + +static int kswapd_cpu_down_prep(unsigned int cpu) +{ + cancel_delayed_work_sync(&per_cpu(vmscan_work, cpu)); + + return 0; +} +int cache_reclaim_enable_handler(struct ctl_table *table, int write, + void __user *buffer, size_t *length, loff_t *ppos) +{ + int ret; + + ret = proc_dointvec_minmax(table, write, buffer, length, ppos); + if (ret) + return ret; + + if (write) + schedule_delayed_work(&shepherd, round_jiffies_relative((unsigned long)vm_cache_reclaim_s * HZ)); + + return 0; +} + +int cache_reclaim_sysctl_handler(struct ctl_table *table, int write, + void __user *buffer, size_t *length, loff_t *ppos) +{ + int ret; + + ret = proc_dointvec_minmax(table, write, buffer, length, ppos); + if (ret) + return ret; + + if (write) + mod_delayed_work(system_wq, &shepherd, + round_jiffies_relative( + (unsigned long)vm_cache_reclaim_s * HZ)); + + return ret; +} +#endif + +static int kpagecache_limitd(void *data) +{ + DEFINE_WAIT(wait); + kpclimitd_context = true; + + /* + * make sure all work threads woken up, when switch to async mode + */ + if (waitqueue_active(&pagecache_reclaim_wq)) + wake_up_interruptible(&pagecache_reclaim_wq); + + for ( ; ; ) { + __shrink_page_cache(GFP_KERNEL); + prepare_to_wait(&kpagecache_limitd_wq, &wait, TASK_INTERRUPTIBLE); + + if (!kthread_should_stop()) + schedule(); + else { + finish_wait(&kpagecache_limitd_wq, &wait); + break; + } + finish_wait(&kpagecache_limitd_wq, &wait); + } + kpclimitd_context = false; + return 0; +} + +static void wakeup_kpclimitd(gfp_t mask) +{ + if (!waitqueue_active(&kpagecache_limitd_wq)) + return; + wake_up_interruptible(&kpagecache_limitd_wq); +} + +void shrink_page_cache(gfp_t mask, struct page *page) +{ + if (0 == vm_pagecache_limit_async) + __shrink_page_cache(mask); + else + wakeup_kpclimitd(mask); +} + +/* It's optimal to keep kswapds on the same CPUs as their memory, but + not required for correctness. So if the last cpu in a node goes + away, we get changed to run anywhere: as the first one comes back, + restore their cpu bindings. */ +static int kswapd_cpu_online(unsigned int cpu) +{ + int nid; + + for_each_node_state(nid, N_MEMORY) { + pg_data_t *pgdat = NODE_DATA(nid); + const struct cpumask *mask; + + mask = cpumask_of_node(pgdat->node_id); + + if (cpumask_any_and(cpu_online_mask, mask) < nr_cpu_ids) + /* One of our CPUs online: restore mask */ + set_cpus_allowed_ptr(pgdat->kswapd, mask); + } + return 0; +} /* * This kswapd start function will be called by init and node-hot-add. @@ -4286,16 +4849,61 @@ void kswapd_stop(int nid) static int __init kswapd_init(void) { - int nid; + /*int nid; swap_setup(); for_each_node_state(nid, N_MEMORY) kswapd_run(nid); - return 0; + return 0;*/ + int nid, ret; + + swap_setup(); + for_each_node_state(nid, N_MEMORY) + kswapd_run(nid); +#ifdef CONFIG_SHRINK_PAGECACHE + ret = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, + "mm/vmscan:online", kswapd_cpu_online, + kswapd_cpu_down_prep); +#else + ret = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, + "mm/vmscan:online", kswapd_cpu_online, + NULL); +#endif + WARN_ON(ret < 0); +#ifdef CONFIG_SHRINK_PAGECACHE + shrink_page_cache_init(); +#endif + return 0; + } module_init(kswapd_init) +int kpagecache_limitd_run(void) +{ + int ret = 0; + + if (kpclimitd) + return 0; + + kpclimitd = kthread_run(kpagecache_limitd, NULL, "kpclimitd"); + if (IS_ERR(kpclimitd)) { + pr_err("Failed to start kpagecache_limitd thread\n"); + ret = PTR_ERR(kpclimitd); + kpclimitd = NULL; + } + return ret; + +} + +void kpagecache_limitd_stop(void) +{ + if (kpclimitd) { + kthread_stop(kpclimitd); + kpclimitd = NULL; + } +} + #ifdef CONFIG_NUMA /* * Node reclaim mode diff --git a/mm/workingset.c b/mm/workingset.c index bba4380405b4..9a5ad145b9bd 100644 --- a/mm/workingset.c +++ b/mm/workingset.c @@ -253,6 +253,7 @@ void workingset_age_nonresident(struct lruvec *lruvec, unsigned long nr_pages) void *workingset_eviction(struct page *page, struct mem_cgroup *target_memcg) { struct pglist_data *pgdat = page_pgdat(page); + struct mem_cgroup *memcg = page_memcg(page); unsigned long eviction; struct lruvec *lruvec; int memcgid; -- 2.30.0

1 0

[PATCH kernel-4.19] drivers/txgbe: fix buffer not null terminated by strncpy in txgbe_ethtool.c
by shenzijun 26 Oct '21

26 Oct '21

From: 沈子俊 <shenzijun(a)kylinos.cn> kylin inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4AG3E?from=project-issue CVE: NA --------------------------------------------------- change copy size in the function strncpy(). Signed-off-by: 沈子俊 <shenzijun(a)kylinos.cn> --- drivers/net/ethernet/netswift/txgbe/txgbe_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/netswift/txgbe/txgbe_ethtool.c b/drivers/net/ethernet/netswift/txgbe/txgbe_ethtool.c index 5cb8ef61e04b..9af9f19fb491 100644 --- a/drivers/net/ethernet/netswift/txgbe/txgbe_ethtool.c +++ b/drivers/net/ethernet/netswift/txgbe/txgbe_ethtool.c @@ -1040,7 +1040,7 @@ static void txgbe_get_drvinfo(struct net_device *netdev, strncpy(drvinfo->version, txgbe_driver_version, sizeof(drvinfo->version) - 1); strncpy(drvinfo->fw_version, adapter->eeprom_id, - sizeof(drvinfo->fw_version)); + sizeof(drvinfo->fw_version) - 1); strncpy(drvinfo->bus_info, pci_name(adapter->pdev), sizeof(drvinfo->bus_info) - 1); if (adapter->num_tx_queues <= TXGBE_NUM_RX_QUEUES) { -- 2.30.0

1 0

[PATCH openEuler-1.0-LTS] blk-mq: complete req in softirq context in case of single queue
by Yang Yingliang 26 Oct '21

26 Oct '21

From: Ming Lei <ming.lei(a)redhat.com> mainline inclusion from mainline-4.20-rc1 commit 36e765392e48e0322222347c4d21078c0b94758c category: bugfix bugzilla: 175585 CVE: NA ------------------------------------------------- Lot of controllers may have only one irq vector for completing IO request. And usually affinity of the only irq vector is all possible CPUs, however, on most of ARCH, there may be only one specific CPU for handling this interrupt. So if all IOs are completed in hardirq context, it is inevitable to degrade IO performance because of increased irq latency. This patch tries to address this issue by allowing to complete request in softirq context, like the legacy IO path. IOPS is observed as ~13%+ in the following randread test on raid0 over virtio-scsi. mdadm --create --verbose /dev/md0 --level=0 --chunk=1024 --raid-devices=8 /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf /dev/sdg /dev/sdh /dev/sdi fio --time_based --name=benchmark --runtime=30 --filename=/dev/md0 --nrfiles=1 --ioengine=libaio --iodepth=32 --direct=1 --invalidate=1 --verify=0 --verify_fatal=0 --numjobs=32 --rw=randread --blocksize=4k Cc: Dongli Zhang <dongli.zhang(a)oracle.com> Cc: Zach Marano <zmarano(a)google.com> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Bart Van Assche <bvanassche(a)acm.org> Cc: Jianchao Wang <jianchao.w.wang(a)oracle.com> Signed-off-by: Ming Lei <ming.lei(a)redhat.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Lihong Kou <koulihong(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- block/blk-mq.c | 14 ++++++++++++++ block/blk-softirq.c | 5 ++--- 2 files changed, 16 insertions(+), 3 deletions(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index 7106c94ea58fe..55c81dcafbdc2 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -600,6 +600,20 @@ void blk_mq_force_complete_rq(struct request *rq) if (rq->internal_tag != -1) blk_mq_sched_completed_request(rq); + /* + * Most of single queue controllers, there is only one irq vector + * for handling IO completion, and the only irq's affinity is set + * as all possible CPUs. On most of ARCHs, this affinity means the + * irq is handled on one specific CPU. + * + * So complete IO reqeust in softirq context in case of single queue + * for not degrading IO performance by irqsoff latency. + */ + if (rq->q->nr_hw_queues == 1) { + __blk_complete_request(rq); + return; + } + if (!test_bit(QUEUE_FLAG_SAME_COMP, &rq->q->queue_flags)) { rq->q->softirq_done_fn(rq); return; diff --git a/block/blk-softirq.c b/block/blk-softirq.c index 15c1f5e12eb89..e47a2f751884d 100644 --- a/block/blk-softirq.c +++ b/block/blk-softirq.c @@ -97,8 +97,8 @@ static int blk_softirq_cpu_dead(unsigned int cpu) void __blk_complete_request(struct request *req) { - int ccpu, cpu; struct request_queue *q = req->q; + int cpu, ccpu = q->mq_ops ? req->mq_ctx->cpu : req->cpu; unsigned long flags; bool shared = false; @@ -110,8 +110,7 @@ void __blk_complete_request(struct request *req) /* * Select completion CPU */ - if (req->cpu != -1) { - ccpu = req->cpu; + if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags) && ccpu != -1) { if (!test_bit(QUEUE_FLAG_SAME_FORCE, &q->queue_flags)) shared = cpus_share_cache(cpu, ccpu); } else -- 2.25.1

1 0

[PATCH kernel-4.19] blk-mq: complete req in softirq context in case of single queue
by Yang Yingliang 26 Oct '21

26 Oct '21

From: Ming Lei <ming.lei(a)redhat.com> mainline inclusion from mainline-4.20-rc1 commit 36e765392e48e0322222347c4d21078c0b94758c category: bugfix bugzilla: 175585 CVE: NA ------------------------------------------------- Lot of controllers may have only one irq vector for completing IO request. And usually affinity of the only irq vector is all possible CPUs, however, on most of ARCH, there may be only one specific CPU for handling this interrupt. So if all IOs are completed in hardirq context, it is inevitable to degrade IO performance because of increased irq latency. This patch tries to address this issue by allowing to complete request in softirq context, like the legacy IO path. IOPS is observed as ~13%+ in the following randread test on raid0 over virtio-scsi. mdadm --create --verbose /dev/md0 --level=0 --chunk=1024 --raid-devices=8 /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf /dev/sdg /dev/sdh /dev/sdi fio --time_based --name=benchmark --runtime=30 --filename=/dev/md0 --nrfiles=1 --ioengine=libaio --iodepth=32 --direct=1 --invalidate=1 --verify=0 --verify_fatal=0 --numjobs=32 --rw=randread --blocksize=4k Cc: Dongli Zhang <dongli.zhang(a)oracle.com> Cc: Zach Marano <zmarano(a)google.com> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Bart Van Assche <bvanassche(a)acm.org> Cc: Jianchao Wang <jianchao.w.wang(a)oracle.com> Signed-off-by: Ming Lei <ming.lei(a)redhat.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Lihong Kou <koulihong(a)huawei.com> Reviewed-by: Tao Hou <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- block/blk-mq.c | 14 ++++++++++++++ block/blk-softirq.c | 5 ++--- 2 files changed, 16 insertions(+), 3 deletions(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index be1e2ad4631aa..52a04f6ffeea2 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -603,6 +603,20 @@ void blk_mq_force_complete_rq(struct request *rq) if (rq->internal_tag != -1) blk_mq_sched_completed_request(rq); + /* + * Most of single queue controllers, there is only one irq vector + * for handling IO completion, and the only irq's affinity is set + * as all possible CPUs. On most of ARCHs, this affinity means the + * irq is handled on one specific CPU. + * + * So complete IO reqeust in softirq context in case of single queue + * for not degrading IO performance by irqsoff latency. + */ + if (rq->q->nr_hw_queues == 1) { + __blk_complete_request(rq); + return; + } + if (!test_bit(QUEUE_FLAG_SAME_COMP, &rq->q->queue_flags)) { rq->q->softirq_done_fn(rq); return; diff --git a/block/blk-softirq.c b/block/blk-softirq.c index 15c1f5e12eb89..e47a2f751884d 100644 --- a/block/blk-softirq.c +++ b/block/blk-softirq.c @@ -97,8 +97,8 @@ static int blk_softirq_cpu_dead(unsigned int cpu) void __blk_complete_request(struct request *req) { - int ccpu, cpu; struct request_queue *q = req->q; + int cpu, ccpu = q->mq_ops ? req->mq_ctx->cpu : req->cpu; unsigned long flags; bool shared = false; @@ -110,8 +110,7 @@ void __blk_complete_request(struct request *req) /* * Select completion CPU */ - if (req->cpu != -1) { - ccpu = req->cpu; + if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags) && ccpu != -1) { if (!test_bit(QUEUE_FLAG_SAME_FORCE, &q->queue_flags)) shared = cpus_share_cache(cpu, ccpu); } else -- 2.25.1

1 0

[PATCH kernel-4.19 1/8] ovl: simplify setting of origin for index lookup
by Yang Yingliang 26 Oct '21

26 Oct '21

From: Vivek Goyal <vgoyal(a)redhat.com> mainline inclusion from mainline-v5.8-rc1 commit 59fb20138a9b5249a4176d5bbc5c670a97343061 category: bugfix bugzilla: NA CVE: NA ------------------------------------------------- overlayfs can keep index of copied up files and directories and it seems to serve two primary puroposes. For regular files, it avoids breaking lower hardlinks over copy up. For directories it seems to be used for various error checks. During ovl_lookup(), we lookup for index using lower dentry in many a cases. That lower dentry is called "origin" and following is a summary of current logic. If there is no upperdentry, always lookup for index using lower dentry. For regular files it helps avoiding breaking hard links over copyup and for directories it seems to be just error checks. If there is an upperdentry, then there are 3 possible cases. - For directories, lower dentry is found using two ways. One is regular path based lookup in lower layers and second is using ORIGIN xattr on upper dentry. First verify that path based lookup lower dentry matches the one pointed by upper ORIGIN xattr. If yes, use this verified origin for index lookup. - For regular files (non-metacopy), there is no path based lookup in lower layers as lookup stops once we find upper dentry. So there is no origin verification. If there is ORIGIN xattr present on upper, use that to lookup index otherwise don't. - For regular metacopy files, again lower dentry is found using path based lookup as well as ORIGIN xattr on upper. Path based lookup is continued in this case to find lower data dentry for metacopy upper. So like directories we only use verified origin. If ORIGIN xattr is not present (Either because lower did not support file handles or because this is hardlink copied up with index=off), then don't use path lookup based lower dentry as origin. This is same as regular non-metacopy file case. Suggested-by: Amir Goldstein <amir73il(a)gmail.com> Signed-off-by: Vivek Goyal <vgoyal(a)redhat.com> Reviewed-by: Amir Goldstein <amir73il(a)gmail.com> Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com> Signed-off-by: Zheng Liang <zhengliang6(a)huawei.com> Reviewed-by: Zhang Yi <yi.zhang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/overlayfs/namei.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/fs/overlayfs/namei.c b/fs/overlayfs/namei.c index 145bfdde53feb..968ad757c578e 100644 --- a/fs/overlayfs/namei.c +++ b/fs/overlayfs/namei.c @@ -1014,25 +1014,30 @@ struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry, } stack = origin_path; ctr = 1; + origin = origin_path->dentry; origin_path = NULL; } /* - * Lookup index by lower inode and verify it matches upper inode. - * We only trust dir index if we verified that lower dir matches - * origin, otherwise dir index entries may be inconsistent and we - * ignore them. + * Always lookup index if there is no-upperdentry. * - * For non-dir upper metacopy dentry, we already set "origin" if we - * verified that lower matched upper origin. If upper origin was - * not present (because lower layer did not support fh encode/decode), - * or indexing is not enabled, do not set "origin" and skip looking up - * index. This case should be handled in same way as a non-dir upper - * without ORIGIN is handled. + * For the case of upperdentry, we have set origin by now if it + * needed to be set. There are basically three cases. + * + * For directories, lookup index by lower inode and verify it matches + * upper inode. We only trust dir index if we verified that lower dir + * matches origin, otherwise dir index entries may be inconsistent + * and we ignore them. + * + * For regular upper, we already set origin if upper had ORIGIN + * xattr. There is no verification though as there is no path + * based dentry lookup in lower in this case. + * + * For metacopy upper, we set a verified origin already if index + * is enabled and if upper had an ORIGIN xattr. * - * Always lookup index of non-dir non-metacopy and non-upper. */ - if (ctr && (!upperdentry || (!d.is_dir && !metacopy))) + if (!upperdentry && ctr) origin = stack[0].dentry; if (origin && ovl_indexdir(dentry->d_sb) && -- 2.25.1

1 7

Re: [PATCH openEuler-21.03] USB: f_ncm: ncm_bitrate (speed) is unsigned
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 17:03, xjx00 写道: > From: Maciej Żenczykowski <maze(a)google.com> > > stable inclusion > from stable-v5.10.44 > commit 0f5a20b1fd9da3ac9f7c6edcad522712ca694d5c > bugzilla:https://bugzilla.openeuler.org/show_bug.cgi?id=358 > CVE: NA > > ------------------------------------------------- > > commit 3370139745853f7826895293e8ac3aec1430508e upstream. > > [ 190.544755] configfs-gadget gadget: notify speed -44967296 > > This is because 4250000000 - 2**32 is -44967296. > > Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added") > Cc: Brooke Basile <brookebasile(a)gmail.com> > Cc: Bryan O'Donoghue <bryan.odonoghue(a)linaro.org> > Cc: Felipe Balbi <balbi(a)kernel.org> > Cc: Lorenzo Colitti <lorenzo(a)google.com> > Cc: Yauheni Kaliuta <yauheni.kaliuta(a)nokia.com> > Cc: Linux USB Mailing List <linux-usb(a)vger.kernel.org> > Acked-By: Lorenzo Colitti <lorenzo(a)google.com> > Signed-off-by: Maciej Żenczykowski <maze(a)google.com> > Cc: stable <stable(a)vger.kernel.org> > Link: https://lore.kernel.org/r/20210608005344.3762668-1-zenczykowski@gmail.com > Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> > Signed-off-by: xjx00 <xjxyklwx(a)126.com> > --- > drivers/usb/gadget/function/f_ncm.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c > index 019bea8e09cc..0d23c6c11a13 100644 > --- a/drivers/usb/gadget/function/f_ncm.c > +++ b/drivers/usb/gadget/function/f_ncm.c > @@ -583,7 +583,7 @@ static void ncm_do_notify(struct f_ncm *ncm) > data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); > data[1] = data[0]; > > - DBG(cdev, "notify speed %d\n", ncm_bitrate(cdev->gadget)); > + DBG(cdev, "notify speed %u\n", ncm_bitrate(cdev->gadget)); > ncm->notify_state = NCM_NOTIFY_CONNECT; > break; > }

2 1

Re: [PATCH openEuler-21.03] ALSA: firewire-lib: fix the context to call snd_pcm_stop_xrun()
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 21:17, lihao 写道: > From: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> > > stable inclusion > from stable-v5.10.44 > commit 98f842951f8aa222e8a8453e6dbce6c056e9984f > bugzilla:https://bugzilla.openeuler.org/show_bug.cgi?id=430 > CVE: NA > > ------------------------------------------------- > > commit 9981b20a5e3694f4625ab5a1ddc98ce7503f6d12 upstream. > > In the workqueue to queue wake-up event, isochronous context is not > processed, thus it's useless to check context for the workqueue to switch > status of runtime for PCM substream to XRUN. On the other hand, in > software IRQ context of 1394 OHCI, it's needed. > > This commit fixes the bug introduced when tasklet was replaced with > workqueue. > > Cc: <stable(a)vger.kernel.org> > Fixes: 2b3d2987d800 ("ALSA: firewire: Replace tasklet with work") > Signed-off-by: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> > Link: https://lore.kernel.org/r/20210605091054.68866-1-o-takashi@sakamocchi.jp > Signed-off-by: Takashi Iwai <tiwai(a)suse.de> > Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> > Signed-off-by: lihao <380525608(a)qq.com> > --- > sound/firewire/amdtp-stream.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/sound/firewire/amdtp-stream.c b/sound/firewire/amdtp-stream.c > index e0faa6601966..5805c5de39fb 100644 > --- a/sound/firewire/amdtp-stream.c > +++ b/sound/firewire/amdtp-stream.c > @@ -804,7 +804,7 @@ static void generate_pkt_descs(struct amdtp_stream *s, struct pkt_desc *descs, > static inline void cancel_stream(struct amdtp_stream *s) > { > s->packet_index = -1; > - if (current_work() == &s->period_work) > + if (in_interrupt()) > amdtp_stream_pcm_abort(s); > WRITE_ONCE(s->pcm_buffer_pointer, SNDRV_PCM_POS_XRUN); > }

1 0

Re: [PATCH openEuler-21.03] drm/msm/a6xx: avoid shadow NULL reference in failure path
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 17:02, lzb 写道: > From: Jonathan Marek <jonathan(a)marek.ca> > > stable inclusion > from stable-v5.10.44 > commit fd681a8c7ac8f649a0718f6cbf2fe75d0587c9a2 > bugzilla: > CVE: NA > > https://bugzilla.openeuler.org/show_bug.cgi?id=472-------------------------… > > commit ce86c239e4d218ae6040bec18e6d19a58edb8b7c upstream. > > If a6xx_hw_init() fails before creating the shadow_bo, the a6xx_pm_suspend > code referencing it will crash. Change the condition to one that avoids > this problem (note: creation of shadow_bo is behind this same condition) > > Fixes: e8b0b994c3a5 ("drm/msm/a6xx: Clear shadow on suspend") > Signed-off-by: Jonathan Marek <jonathan(a)marek.ca> > Reviewed-by: Akhil P Oommen <akhilpo(a)codeaurora.org> > Link: https://lore.kernel.org/r/20210513171431.18632-6-jonathan@marek.ca > Signed-off-by: Rob Clark <robdclark(a)chromium.org> > Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> > Signed-off-by: lzb <zbliancs(a)qq.com> > --- > drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > index 722c2fe3bfd5..7061ba457c5b 100644 > --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > @@ -1055,7 +1055,7 @@ static int a6xx_pm_suspend(struct msm_gpu *gpu) > if (ret) > return ret; > > - if (adreno_gpu->base.hw_apriv || a6xx_gpu->has_whereami) > + if (a6xx_gpu->shadow_bo) > for (i = 0; i < gpu->nr_rings; i++) > a6xx_gpu->shadow[i] = 0; >

1 0

Re: [PATCH openEuler-21.03] sched/fair: Make sure to update tg contrib for blocked load
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 17:09, wjy 写道: > From: Vincent Guittot <vincent.guittot(a)linaro.org> > > stable inclusion > from stable-v5.10.44 > commit 32e22db8b25ea165bd9e446c7f92b089c8568eaf > bugzilla: https://bugzilla.openeuler.org/show_bug.cgi?id=379 > CVE: NA > > ------------------------------------------------- > > commit 02da26ad5ed6ea8680e5d01f20661439611ed776 upstream. > > During the update of fair blocked load (__update_blocked_fair()), we > update the contribution of the cfs in tg->load_avg if cfs_rq's pelt > has decayed. Nevertheless, the pelt values of a cfs_rq could have > been recently updated while propagating the change of a child. In this > case, cfs_rq's pelt will not decayed because it has already been > updated and we don't update tg->load_avg. > > __update_blocked_fair > ... > for_each_leaf_cfs_rq_safe: child cfs_rq > update cfs_rq_load_avg() for child cfs_rq > ... > update_load_avg(cfs_rq_of(se), se, 0) > ... > update cfs_rq_load_avg() for parent cfs_rq > -propagation of child's load makes parent cfs_rq->load_sum > becoming null > -UPDATE_TG is not set so it doesn't update parent > cfs_rq->tg_load_avg_contrib > .. > for_each_leaf_cfs_rq_safe: parent cfs_rq > update cfs_rq_load_avg() for parent cfs_rq > - nothing to do because parent cfs_rq has already been updated > recently so cfs_rq->tg_load_avg_contrib is not updated > ... > parent cfs_rq is decayed > list_del_leaf_cfs_rq parent cfs_rq > - but it still contibutes to tg->load_avg > > we must set UPDATE_TG flags when propagting pending load to the parent > > Fixes: 039ae8bcf7a5 ("sched/fair: Fix O(nr_cgroups) in the load balancing path") > Reported-by: Odin Ugedal <odin(a)uged.al> > Signed-off-by: Vincent Guittot <vincent.guittot(a)linaro.org> > Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> > Reviewed-by: Odin Ugedal <odin(a)uged.al> > Link: https://lkml.kernel.org/r/20210527122916.27683-3-vincent.guittot@linaro.org > Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> > Signed-off-by: wjy <464310675(a)qq.com> > --- > kernel/sched/fair.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c > index 1ad0e52487f6..43497d88a330 100644 > --- a/kernel/sched/fair.c > +++ b/kernel/sched/fair.c > @@ -7961,7 +7961,7 @@ static bool __update_blocked_fair(struct rq *rq, bool *done) > /* Propagate pending load changes to the parent, if any: */ > se = cfs_rq->tg->se[cpu]; > if (se && !skip_blocked_update(se)) > - update_load_avg(cfs_rq_of(se), se, 0); > + update_load_avg(cfs_rq_of(se), se, UPDATE_TG); > > /* > * There can be a lot of idle CPU cgroups. Don't let fully

1 0

Re: [PATCH openEuler-21.03] NFSv4: Fix second deadlock in nfs4_evict_inode()
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 17:13, wyp 写道: > From: Trond Myklebust <trond.myklebust(a)hammerspace.com> > > stable inclusion > from stable-v5.10.44 > commit d973bd0d6e7f9b4ea976cc619e8d6e0d235b9056 > bugzilla: https://bugzilla.openeuler.org/show_bug.cgi?id=462 > CVE: NA > > ------------------------------------------------- > > commit c3aba897c6e67fa464ec02b1f17911577d619713 upstream. > > If the inode is being evicted but has to return a layout first, then > that too can cause a deadlock in the corner case where the server > reboots. > > Signed-off-by: Trond Myklebust <trond.myklebust(a)hammerspace.com> > Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> > Signed-off-by: Hang <haihangyiyuan(a)163.com> > Reviewed-by: Jian Cheng <cj.chengjian(a)huawei.com> > Signed-off-by: Wang ShaoBo <bobo.shaobowang(a)huawei.com> > --- > fs/nfs/nfs4proc.c | 9 +++++++-- > 1 file changed, 7 insertions(+), 2 deletions(-) > > diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c > index c92d6ff0fcea..eedcbe6832fb 100644 > --- a/fs/nfs/nfs4proc.c > +++ b/fs/nfs/nfs4proc.c > @@ -9619,15 +9619,20 @@ int nfs4_proc_layoutreturn(struct nfs4_layoutreturn *lrp, bool sync) > &task_setup_data.rpc_client, &msg); > > dprintk("--> %s\n", __func__); > + lrp->inode = nfs_igrab_and_active(lrp->args.inode); > if (!sync) { > - lrp->inode = nfs_igrab_and_active(lrp->args.inode); > if (!lrp->inode) { > nfs4_layoutreturn_release(lrp); > return -EAGAIN; > } > task_setup_data.flags |= RPC_TASK_ASYNC; > } > - nfs4_init_sequence(&lrp->args.seq_args, &lrp->res.seq_res, 1, 0); > + if (!lrp->inode) > + nfs4_init_sequence(&lrp->args.seq_args, &lrp->res.seq_res, 1, > + 1); > + else > + nfs4_init_sequence(&lrp->args.seq_args, &lrp->res.seq_res, 1, > + 0); > task = rpc_run_task(&task_setup_data); > if (IS_ERR(task)) > return PTR_ERR(task);

1 0

Re: [PATCH openEuler-21.03] net: mdiobus: get rid of a BUG_ON()
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 17:15, gpj 写道: > From: Dan Carpenter <dan.carpenter(a)oracle.com> > > stable inclusion > from stable-v5.10.44 > commit be23c4af3d8a1b986fe9b43b8966797653a76ca4 > bugzilla: https://bugzilla.openeuler.org/show_bug.cgi?id=341 > CVE: NA > > -------------------------------- > > [ Upstream commit 1dde47a66d4fb181830d6fa000e5ea86907b639e ] > > We spotted a bug recently during a review where a driver was > unregistering a bus that wasn't registered, which would trigger this > BUG_ON(). Let's handle that situation more gracefully, and just print > a warning and return. > > Reported-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> > Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> > Reviewed-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> > Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> > Signed-off-by: David S. Miller <davem(a)davemloft.net> > Signed-off-by: Sasha Levin <sashal(a)kernel.org> > Signed-off-by: wangqing <wangqing(a)uniontech.com> > Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> > Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> > --- > drivers/net/phy/mdio_bus.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c > index 757e950fb745..b848439fa837 100644 > --- a/drivers/net/phy/mdio_bus.c > +++ b/drivers/net/phy/mdio_bus.c > @@ -608,7 +608,8 @@ void mdiobus_unregister(struct mii_bus *bus) > struct mdio_device *mdiodev; > int i; > > - BUG_ON(bus->state != MDIOBUS_REGISTERED); > + if (WARN_ON_ONCE(bus->state != MDIOBUS_REGISTERED)) > + return; > bus->state = MDIOBUS_UNREGISTERED; > > for (i = 0; i < PHY_MAX_ADDR; i++) {

1 0

Re: [PATCH openEuler-21.03] net: mdiobus: get rid of a BUG_ON()
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 17:18, dqh 写道: > From: Dan Carpenter <dan.carpenter(a)oracle.com> > > stable inclusion > from stable-v5.10.44 > commit be23c4af3d8a1b986fe9b43b8966797653a76ca4 > bugzilla: https://bugzilla.openeuler.org/show_bug.cgi?id=341 > CVE: NA > > -------------------------------- > > [ Upstream commit 1dde47a66d4fb181830d6fa000e5ea86907b639e ] > > We spotted a bug recently during a review where a driver was > unregistering a bus that wasn't registered, which would trigger this > BUG_ON(). Let's handle that situation more gracefully, and just print > a warning and return. > > Reported-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> > Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> > Reviewed-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> > Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> > Signed-off-by: David S. Miller <davem(a)davemloft.net> > Signed-off-by: Sasha Levin <sashal(a)kernel.org> > Signed-off-by: wangqing <wangqing(a)uniontech.com> > Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> > Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> > --- > drivers/net/phy/mdio_bus.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c > index 757e950fb745..b848439fa837 100644 > --- a/drivers/net/phy/mdio_bus.c > +++ b/drivers/net/phy/mdio_bus.c > @@ -608,7 +608,8 @@ void mdiobus_unregister(struct mii_bus *bus) > struct mdio_device *mdiodev; > int i; > > - BUG_ON(bus->state != MDIOBUS_REGISTERED); > + if (WARN_ON_ONCE(bus->state != MDIOBUS_REGISTERED)) > + return; > bus->state = MDIOBUS_UNREGISTERED; > > for (i = 0; i < PHY_MAX_ADDR; i++) {

1 0

Re: [PATCH openEuler-21.03] spi: Cleanup on failure of initial setup
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 17:18, dqh 写道: > From: Lukas Wunner <lukas(a)wunner.de> > > stable inclusion > from stable-v5.10.44 > commit fa05ba61967ad051f5f2b7c4f39d6c56719c9900 > bugzilla: https://bugzilla.openeuler.org/show_bug.cgi?id=470 > CVE: NA > > ------------------------------------------------- > > [ Upstream commit 2ec6f20b33eb4f62ab90bdcd620436c883ec3af6 ] > > Commit c7299fea6769 ("spi: Fix spi device unregister flow") changed the > SPI core's behavior if the ->setup() hook returns an error upon adding > an spi_device: Before, the ->cleanup() hook was invoked to free any > allocations that were made by ->setup(). With the commit, that's no > longer the case, so the ->setup() hook is expected to free the > allocations itself. > > I've identified 5 drivers which depend on the old behavior and am fixing > them up hereinafter: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c > spi-omap2-mcspi.c spi-pxa2xx.c > > Importantly, ->setup() is not only invoked on spi_device *addition*: > It may subsequently be called to *change* SPI parameters. If changing > these SPI parameters fails, freeing memory allocations would be wrong. > That should only be done if the spi_device is finally destroyed. > I am therefore using a bool "initial_setup" in 4 of the affected drivers > to differentiate between the invocation on *adding* the spi_device and > any subsequent invocations: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c > spi-omap2-mcspi.c > > In spi-pxa2xx.c, it seems the ->setup() hook can only fail on spi_device > addition, not any subsequent calls. It therefore doesn't need the bool. > > It's worth noting that 5 other drivers already perform a cleanup if the > ->setup() hook fails. Before c7299fea6769, they caused a double-free > if ->setup() failed on spi_device addition. Since the commit, they're > fine. These drivers are: spi-mpc512x-psc.c spi-pl022.c spi-s3c64xx.c > spi-st-ssc4.c spi-tegra114.c > > (spi-pxa2xx.c also already performs a cleanup, but only in one of > several error paths.) > > Fixes: c7299fea6769 ("spi: Fix spi device unregister flow") > Signed-off-by: Lukas Wunner <lukas(a)wunner.de> > Cc: Saravana Kannan <saravanak(a)google.com> > Acked-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> # pxa2xx > Link: https://lore.kernel.org/r/f76a0599469f265b69c371538794101fa37b5536.16221493… > Signed-off-by: Mark Brown <broonie(a)kernel.org> > Signed-off-by: Sasha Levin <sashal(a)kernel.org> > Signed-off-by: dqh <1486653795(a)qq.com> > --- > drivers/spi/spi-bitbang.c | 18 ++++++++++++++---- > drivers/spi/spi-fsl-spi.c | 4 ++++ > drivers/spi/spi-omap-uwire.c | 9 ++++++++- > drivers/spi/spi-omap2-mcspi.c | 33 ++++++++++++++++++++------------- > drivers/spi/spi-pxa2xx.c | 9 ++++++++- > 5 files changed, 54 insertions(+), 19 deletions(-) > > diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c > index 1a7352abd878..3d8948a17095 100644 > --- a/drivers/spi/spi-bitbang.c > +++ b/drivers/spi/spi-bitbang.c > @@ -181,6 +181,8 @@ int spi_bitbang_setup(struct spi_device *spi) > { > struct spi_bitbang_cs *cs = spi->controller_state; > struct spi_bitbang *bitbang; > + bool initial_setup = false; > + int retval; > > bitbang = spi_master_get_devdata(spi->master); > > @@ -189,22 +191,30 @@ int spi_bitbang_setup(struct spi_device *spi) > if (!cs) > return -ENOMEM; > spi->controller_state = cs; > + initial_setup = true; > } > > /* per-word shift register access, in hardware or bitbanging */ > cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)]; > - if (!cs->txrx_word) > - return -EINVAL; > + if (!cs->txrx_word) { > + retval = -EINVAL; > + goto err_free; > + } > > if (bitbang->setup_transfer) { > - int retval = bitbang->setup_transfer(spi, NULL); > + retval = bitbang->setup_transfer(spi, NULL); > if (retval < 0) > - return retval; > + goto err_free; > } > > dev_dbg(&spi->dev, "%s, %u nsec/bit\n", __func__, 2 * cs->nsecs); > > return 0; > + > +err_free: > + if (initial_setup) > + kfree(cs); > + return retval; > } > EXPORT_SYMBOL_GPL(spi_bitbang_setup); > > diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c > index d0e5aa18b7ba..bdf94cc7be1a 100644 > --- a/drivers/spi/spi-fsl-spi.c > +++ b/drivers/spi/spi-fsl-spi.c > @@ -440,6 +440,7 @@ static int fsl_spi_setup(struct spi_device *spi) > { > struct mpc8xxx_spi *mpc8xxx_spi; > struct fsl_spi_reg __iomem *reg_base; > + bool initial_setup = false; > int retval; > u32 hw_mode; > struct spi_mpc8xxx_cs *cs = spi_get_ctldata(spi); > @@ -452,6 +453,7 @@ static int fsl_spi_setup(struct spi_device *spi) > if (!cs) > return -ENOMEM; > spi_set_ctldata(spi, cs); > + initial_setup = true; > } > mpc8xxx_spi = spi_master_get_devdata(spi->master); > > @@ -475,6 +477,8 @@ static int fsl_spi_setup(struct spi_device *spi) > retval = fsl_spi_setup_transfer(spi, NULL); > if (retval < 0) { > cs->hw_mode = hw_mode; /* Restore settings */ > + if (initial_setup) > + kfree(cs); > return retval; > } > > diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c > index 71402f71ddd8..df28c6664aba 100644 > --- a/drivers/spi/spi-omap-uwire.c > +++ b/drivers/spi/spi-omap-uwire.c > @@ -424,15 +424,22 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t) > static int uwire_setup(struct spi_device *spi) > { > struct uwire_state *ust = spi->controller_state; > + bool initial_setup = false; > + int status; > > if (ust == NULL) { > ust = kzalloc(sizeof(*ust), GFP_KERNEL); > if (ust == NULL) > return -ENOMEM; > spi->controller_state = ust; > + initial_setup = true; > } > > - return uwire_setup_transfer(spi, NULL); > + status = uwire_setup_transfer(spi, NULL); > + if (status && initial_setup) > + kfree(ust); > + > + return status; > } > > static void uwire_cleanup(struct spi_device *spi) > diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c > index d4c9510af393..3596bbe4b776 100644 > --- a/drivers/spi/spi-omap2-mcspi.c > +++ b/drivers/spi/spi-omap2-mcspi.c > @@ -1032,8 +1032,22 @@ static void omap2_mcspi_release_dma(struct spi_master *master) > } > } > > +static void omap2_mcspi_cleanup(struct spi_device *spi) > +{ > + struct omap2_mcspi_cs *cs; > + > + if (spi->controller_state) { > + /* Unlink controller state from context save list */ > + cs = spi->controller_state; > + list_del(&cs->node); > + > + kfree(cs); > + } > +} > + > static int omap2_mcspi_setup(struct spi_device *spi) > { > + bool initial_setup = false; > int ret; > struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master); > struct omap2_mcspi_regs *ctx = &mcspi->ctx; > @@ -1051,35 +1065,28 @@ static int omap2_mcspi_setup(struct spi_device *spi) > spi->controller_state = cs; > /* Link this to context save list */ > list_add_tail(&cs->node, &ctx->cs); > + initial_setup = true; > } > > ret = pm_runtime_get_sync(mcspi->dev); > if (ret < 0) { > pm_runtime_put_noidle(mcspi->dev); > + if (initial_setup) > + omap2_mcspi_cleanup(spi); > > return ret; > } > > ret = omap2_mcspi_setup_transfer(spi, NULL); > + if (ret && initial_setup) > + omap2_mcspi_cleanup(spi); > + > pm_runtime_mark_last_busy(mcspi->dev); > pm_runtime_put_autosuspend(mcspi->dev); > > return ret; > } > > -static void omap2_mcspi_cleanup(struct spi_device *spi) > -{ > - struct omap2_mcspi_cs *cs; > - > - if (spi->controller_state) { > - /* Unlink controller state from context save list */ > - cs = spi->controller_state; > - list_del(&cs->node); > - > - kfree(cs); > - } > -} > - > static irqreturn_t omap2_mcspi_irq_handler(int irq, void *data) > { > struct omap2_mcspi *mcspi = data; > diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c > index d6b534d38e5d..56a62095ec8c 100644 > --- a/drivers/spi/spi-pxa2xx.c > +++ b/drivers/spi/spi-pxa2xx.c > @@ -1254,6 +1254,8 @@ static int setup_cs(struct spi_device *spi, struct chip_data *chip, > chip->gpio_cs_inverted = spi->mode & SPI_CS_HIGH; > > err = gpiod_direction_output(gpiod, !chip->gpio_cs_inverted); > + if (err) > + gpiod_put(chip->gpiod_cs); > } > > return err; > @@ -1267,6 +1269,7 @@ static int setup(struct spi_device *spi) > struct driver_data *drv_data = > spi_controller_get_devdata(spi->controller); > uint tx_thres, tx_hi_thres, rx_thres; > + int err; > > switch (drv_data->ssp_type) { > case QUARK_X1000_SSP: > @@ -1413,7 +1416,11 @@ static int setup(struct spi_device *spi) > if (drv_data->ssp_type == CE4100_SSP) > return 0; > > - return setup_cs(spi, chip, chip_info); > + err = setup_cs(spi, chip, chip_info); > + if (err) > + kfree(chip); > + > + return err; > } > > static void cleanup(struct spi_device *spi)

1 0

Re: [PATCH openEuler-21.03] usb: chipidea: udc: assign interrupt number to USB gadget structure
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 17:19, chensiyan96 写道: > From: Li Jun <jun.li(a)nxp.com> > > stable inclusion > from stable-v5.10.44 > commit 2e2145ccfbcb0dd38d8423681d22b595ca735846 > bugzilla: https://bugzilla.openeuler.org/show_bug.cgi?id=376 > CVE: NA > > ------------------------------------------------- > > [ Upstream commit 9e3927f6373da54cb17e17f4bd700907e1123d2f ] > > Chipidea also need sync interrupt before unbind the udc while > gadget remove driver, otherwise setup irq handling may happen > while unbind, see below dump generated from android function > switch stress test: > > [ 4703.503056] android_work: sent uevent USB_STATE=CONNECTED > [ 4703.514642] android_work: sent uevent USB_STATE=DISCONNECTED > [ 4703.651339] android_work: sent uevent USB_STATE=CONNECTED > [ 4703.661806] init: Control message: Processed ctl.stop for 'adbd' from pid: 561 (system_server) > [ 4703.673469] init: processing action (init.svc.adbd=stopped) from (/system/etc/init/hw/init.usb.configfs.rc:14) > [ 4703.676451] Unable to handle kernel read from unreadable memory at virtual address 0000000000000090 > [ 4703.676454] Mem abort info: > [ 4703.676458] ESR = 0x96000004 > [ 4703.676461] EC = 0x25: DABT (current EL), IL = 32 bits > [ 4703.676464] SET = 0, FnV = 0 > [ 4703.676466] EA = 0, S1PTW = 0 > [ 4703.676468] Data abort info: > [ 4703.676471] ISV = 0, ISS = 0x00000004 > [ 4703.676473] CM = 0, WnR = 0 > [ 4703.676478] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004a867000 > [ 4703.676481] [0000000000000090] pgd=0000000000000000, p4d=0000000000000000 > [ 4703.676503] Internal error: Oops: 96000004 [#1] PREEMPT SMP > [ 4703.758297] Modules linked in: synaptics_dsx_i2c moal(O) mlan(O) > [ 4703.764327] CPU: 0 PID: 235 Comm: lmkd Tainted: G W O 5.10.9-00001-g3f5fd8487c38-dirty #63 > [ 4703.773720] Hardware name: NXP i.MX8MNano EVK board (DT) > [ 4703.779033] pstate: 60400085 (nZCv daIf +PAN -UAO -TCO BTYPE=--) > [ 4703.785046] pc : _raw_write_unlock_bh+0xc0/0x2c8 > [ 4703.789667] lr : android_setup+0x4c/0x168 > [ 4703.793676] sp : ffff80001256bd80 > [ 4703.796989] x29: ffff80001256bd80 x28: 00000000000000a8 > [ 4703.802304] x27: ffff800012470000 x26: ffff80006d923000 > [ 4703.807616] x25: ffff800012471000 x24: ffff00000b091140 > [ 4703.812929] x23: ffff0000077dbd38 x22: ffff0000077da490 > [ 4703.818242] x21: ffff80001256be30 x20: 0000000000000000 > [ 4703.823554] x19: 0000000000000080 x18: ffff800012561048 > [ 4703.828867] x17: 0000000000000000 x16: 0000000000000039 > [ 4703.834180] x15: ffff8000106ad258 x14: ffff80001194c277 > [ 4703.839493] x13: 0000000000003934 x12: 0000000000000000 > [ 4703.844805] x11: 0000000000000000 x10: 0000000000000001 > [ 4703.850117] x9 : 0000000000000000 x8 : 0000000000000090 > [ 4703.855429] x7 : 6f72646e61203a70 x6 : ffff8000124f2450 > [ 4703.860742] x5 : ffffffffffffffff x4 : 0000000000000009 > [ 4703.866054] x3 : ffff8000108a290c x2 : ffff00007fb3a9c8 > [ 4703.871367] x1 : 0000000000000000 x0 : 0000000000000090 > [ 4703.876681] Call trace: > [ 4703.879129] _raw_write_unlock_bh+0xc0/0x2c8 > [ 4703.883397] android_setup+0x4c/0x168 > [ 4703.887059] udc_irq+0x824/0xa9c > [ 4703.890287] ci_irq+0x124/0x148 > [ 4703.893429] __handle_irq_event_percpu+0x84/0x268 > [ 4703.898131] handle_irq_event+0x64/0x14c > [ 4703.902054] handle_fasteoi_irq+0x110/0x210 > [ 4703.906236] __handle_domain_irq+0x8c/0xd4 > [ 4703.910332] gic_handle_irq+0x6c/0x124 > [ 4703.914081] el1_irq+0xdc/0x1c0 > [ 4703.917221] _raw_spin_unlock_irq+0x20/0x54 > [ 4703.921405] finish_task_switch+0x84/0x224 > [ 4703.925502] __schedule+0x4a4/0x734 > [ 4703.928990] schedule+0xa0/0xe8 > [ 4703.932132] do_notify_resume+0x150/0x184 > [ 4703.936140] work_pending+0xc/0x40c > [ 4703.939633] Code: d5384613 521b0a69 d5184609 f9800111 (885ffd01) > [ 4703.945732] ---[ end trace ba5c1875ae49d53c ]--- > [ 4703.950350] Kernel panic - not syncing: Oops: Fatal exception in interrupt > [ 4703.957223] SMP: stopping secondary CPUs > [ 4703.961151] Kernel Offset: disabled > [ 4703.964638] CPU features: 0x0240002,2000200c > [ 4703.968905] Memory Limit: none > [ 4703.971963] Rebooting in 5 seconds.. > > Tested-by: faqiang.zhu <faqiang.zhu(a)nxp.com> > Signed-off-by: Li Jun <jun.li(a)nxp.com> > Link: https://lore.kernel.org/r/1620989984-7653-1-git-send-email-jun.li@nxp.com > Signed-off-by: Peter Chen <peter.chen(a)kernel.org> > Signed-off-by: Sasha Levin <sashal(a)kernel.org> > Signed-off-by: chensiyan96 <3225973902(a)qq.com> > --- > drivers/usb/chipidea/udc.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c > index 60ea932afe2b..5f35cdd2cf1d 100644 > --- a/drivers/usb/chipidea/udc.c > +++ b/drivers/usb/chipidea/udc.c > @@ -2055,6 +2055,7 @@ static int udc_start(struct ci_hdrc *ci) > ci->gadget.name = ci->platdata->name; > ci->gadget.otg_caps = otg_caps; > ci->gadget.sg_supported = 1; > + ci->gadget.irq = ci->irq; > > if (ci->platdata->flags & CI_HDRC_REQUIRES_ALIGNED_DMA) > ci->gadget.quirk_avoids_skb_reserve = 1;

1 0

Re: [PATCH openEuler-21.03] net: mdiobus: get rid of a BUG_ON()
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 17:25, ZhuoliHuang 写道: > From: Dan Carpenter <dan.carpenter(a)oracle.com> > > stable inclusion > from stable-v5.10.44 > commit be23c4af3d8a1b986fe9b43b8966797653a76ca4 > bugzilla: https://bugzilla.openeuler.org/show_bug.cgi?id=341 > CVE: NA > > -------------------------------- > > [ Upstream commit 1dde47a66d4fb181830d6fa000e5ea86907b639e ] > > We spotted a bug recently during a review where a driver was > unregistering a bus that wasn't registered, which would trigger this > BUG_ON(). Let's handle that situation more gracefully, and just print > a warning and return. > > Reported-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> > Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> > Reviewed-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> > Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> > Signed-off-by: David S. Miller <davem(a)davemloft.net> > Signed-off-by: Sasha Levin <sashal(a)kernel.org> > Signed-off-by: wangqing <wangqing(a)uniontech.com> > Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> > Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> > --- > drivers/net/phy/mdio_bus.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c > index 757e950fb745..b848439fa837 100644 > --- a/drivers/net/phy/mdio_bus.c > +++ b/drivers/net/phy/mdio_bus.c > @@ -608,7 +608,8 @@ void mdiobus_unregister(struct mii_bus *bus) > struct mdio_device *mdiodev; > int i; > > - BUG_ON(bus->state != MDIOBUS_REGISTERED); > + if (WARN_ON_ONCE(bus->state != MDIOBUS_REGISTERED)) > + return; > bus->state = MDIOBUS_UNREGISTERED; > > for (i = 0; i < PHY_MAX_ADDR; i++) {

1 0

Re: [PATCH openEuler-21.03] net: mdiobus: get rid of a BUG_ON()
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 17:26, lihao 写道: > From: Dan Carpenter <dan.carpenter(a)oracle.com> > > stable inclusion > from stable-v5.10.44 > commit be23c4af3d8a1b986fe9b43b8966797653a76ca4 > bugzilla: https://bugzilla.openeuler.org/show_bug.cgi?id=341 > CVE: NA > > -------------------------------- > > [ Upstream commit 1dde47a66d4fb181830d6fa000e5ea86907b639e ] > > We spotted a bug recently during a review where a driver was > unregistering a bus that wasn't registered, which would trigger this > BUG_ON(). Let's handle that situation more gracefully, and just print > a warning and return. > > Reported-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> > Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> > Reviewed-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> > Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> > Signed-off-by: David S. Miller <davem(a)davemloft.net> > Signed-off-by: Sasha Levin <sashal(a)kernel.org> > Signed-off-by: wangqing <wangqing(a)uniontech.com> > Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> > Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> > --- > drivers/net/phy/mdio_bus.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c > index 757e950fb745..b848439fa837 100644 > --- a/drivers/net/phy/mdio_bus.c > +++ b/drivers/net/phy/mdio_bus.c > @@ -608,7 +608,8 @@ void mdiobus_unregister(struct mii_bus *bus) > struct mdio_device *mdiodev; > int i; > > - BUG_ON(bus->state != MDIOBUS_REGISTERED); > + if (WARN_ON_ONCE(bus->state != MDIOBUS_REGISTERED)) > + return; > bus->state = MDIOBUS_UNREGISTERED; > > for (i = 0; i < PHY_MAX_ADDR; i++) {

1 0

Re: [PATCH openEuler-21.03] net: mdiobus: get rid of a BUG_ON()
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 17:27, zanderzhao 写道: > From: Dan Carpenter <dan.carpenter(a)oracle.com> > > stable inclusion > from stable-v5.10.44 > commit be23c4af3d8a1b986fe9b43b8966797653a76ca4 > bugzilla: https://bugzilla.openeuler.org/show_bug.cgi?id=341 > CVE: NA > > -------------------------------- > > [ Upstream commit 1dde47a66d4fb181830d6fa000e5ea86907b639e ] > > We spotted a bug recently during a review where a driver was > unregistering a bus that wasn't registered, which would trigger this > BUG_ON(). Let's handle that situation more gracefully, and just print > a warning and return. > > Reported-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> > Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> > Reviewed-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> > Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> > Signed-off-by: David S. Miller <davem(a)davemloft.net> > Signed-off-by: Sasha Levin <sashal(a)kernel.org> > Signed-off-by: wangqing <wangqing(a)uniontech.com> > Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> > Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> > --- > drivers/net/phy/mdio_bus.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c > index 757e950fb745..b848439fa837 100644 > --- a/drivers/net/phy/mdio_bus.c > +++ b/drivers/net/phy/mdio_bus.c > @@ -608,7 +608,8 @@ void mdiobus_unregister(struct mii_bus *bus) > struct mdio_device *mdiodev; > int i; > > - BUG_ON(bus->state != MDIOBUS_REGISTERED); > + if (WARN_ON_ONCE(bus->state != MDIOBUS_REGISTERED)) > + return; > bus->state = MDIOBUS_UNREGISTERED; > > for (i = 0; i < PHY_MAX_ADDR; i++) {

1 0

Re: [PATCH openEuler-21.03] scsi: core: Fix failure handling of scsi_add_host_with_dma()
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 17:32, dongenyang 写道: > From: Ming Lei <ming.lei(a)redhat.com> > > stable inclusion > from stable-v5.10.44 > commit 146446a43b3dbaa3a58364ef99fd606b3f324832 > bugzilla:https://bugzilla.openeuler.org/show_bug.cgi?id=361 > CVE: NA > > ------------------------------------------------- > > commit 3719f4ff047e20062b8314c23ec3cab84d74c908 upstream. > > When scsi_add_host_with_dma() returns failure, the caller will call > scsi_host_put(shost) to release everything allocated for this host > instance. Consequently we can't also free allocated stuff in > scsi_add_host_with_dma(), otherwise we will end up with a double free. > > Strictly speaking, host resource allocations should have been done in > scsi_host_alloc(). However, the allocations may need information which is > not yet provided by the driver when that function is called. So leave the > allocations where they are but rely on host device's release handler to > free resources. > > Link: https://lore.kernel.org/r/20210602133029.2864069-3-ming.lei@redhat.com > Cc: Bart Van Assche <bvanassche(a)acm.org> > Cc: John Garry <john.garry(a)huawei.com> > Cc: Hannes Reinecke <hare(a)suse.de> > Tested-by: John Garry <john.garry(a)huawei.com> > Reviewed-by: Bart Van Assche <bvanassche(a)acm.org> > Reviewed-by: John Garry <john.garry(a)huawei.com> > Reviewed-by: Hannes Reinecke <hare(a)suse.de> > Signed-off-by: Ming Lei <ming.lei(a)redhat.com> > Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> > Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> > Signed-off-by: dongenyang <sdlpdey(a)163.com> > --- > drivers/scsi/hosts.c | 14 ++++++-------- > 1 file changed, 6 insertions(+), 8 deletions(-) > > diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c > index 2f162603876f..85ec3cce43f1 100644 > --- a/drivers/scsi/hosts.c > +++ b/drivers/scsi/hosts.c > @@ -278,23 +278,22 @@ int scsi_add_host_with_dma(struct Scsi_Host *shost, struct device *dev, > > if (!shost->work_q) { > error = -EINVAL; > - goto out_free_shost_data; > + goto out_del_dev; > } > } > > error = scsi_sysfs_add_host(shost); > if (error) > - goto out_destroy_host; > + goto out_del_dev; > > scsi_proc_host_add(shost); > scsi_autopm_put_host(shost); > return error; > > - out_destroy_host: > - if (shost->work_q) > - destroy_workqueue(shost->work_q); > - out_free_shost_data: > - kfree(shost->shost_data); > + /* > + * Any host allocation in this function will be freed in > + * scsi_host_dev_release(). > + */ > out_del_dev: > device_del(&shost->shost_dev); > out_del_gendev: > @@ -304,7 +303,6 @@ int scsi_add_host_with_dma(struct Scsi_Host *shost, struct device *dev, > pm_runtime_disable(&shost->shost_gendev); > pm_runtime_set_suspended(&shost->shost_gendev); > pm_runtime_put_noidle(&shost->shost_gendev); > - scsi_mq_destroy_tags(shost); > fail: > return error; > }

1 0

Re: [PATCH openEuler-21.03] USB: f_ncm: ncm_bitrate (speed) is unsigned
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 17:32, xjx00 写道: > From: Maciej Żenczykowski <maze(a)google.com> > > stable inclusion > from stable-v5.10.44 > commit 0f5a20b1fd9da3ac9f7c6edcad522712ca694d5c > bugzilla:https://bugzilla.openeuler.org/show_bug.cgi?id=358 > CVE: NA > > ------------------------------------------------- > > commit 3370139745853f7826895293e8ac3aec1430508e upstream. > > [ 190.544755] configfs-gadget gadget: notify speed -44967296 > > This is because 4250000000 - 2**32 is -44967296. > > Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added") > Cc: Brooke Basile <brookebasile(a)gmail.com> > Cc: Bryan O'Donoghue <bryan.odonoghue(a)linaro.org> > Cc: Felipe Balbi <balbi(a)kernel.org> > Cc: Lorenzo Colitti <lorenzo(a)google.com> > Cc: Yauheni Kaliuta <yauheni.kaliuta(a)nokia.com> > Cc: Linux USB Mailing List <linux-usb(a)vger.kernel.org> > Acked-By: Lorenzo Colitti <lorenzo(a)google.com> > Signed-off-by: Maciej Żenczykowski <maze(a)google.com> > Cc: stable <stable(a)vger.kernel.org> > Link: https://lore.kernel.org/r/20210608005344.3762668-1-zenczykowski@gmail.com > Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> > Signed-off-by: xjx00 <xjxyklwx(a)126.com> > --- > drivers/usb/gadget/function/f_ncm.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c > index 019bea8e09cc..0d23c6c11a13 100644 > --- a/drivers/usb/gadget/function/f_ncm.c > +++ b/drivers/usb/gadget/function/f_ncm.c > @@ -583,7 +583,7 @@ static void ncm_do_notify(struct f_ncm *ncm) > data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); > data[1] = data[0]; > > - DBG(cdev, "notify speed %d\n", ncm_bitrate(cdev->gadget)); > + DBG(cdev, "notify speed %u\n", ncm_bitrate(cdev->gadget)); > ncm->notify_state = NCM_NOTIFY_CONNECT; > break; > }

1 0

Re: [PATCH openEuler-21.03] gpio: wcd934x: Fix shift-out-of-bounds error
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 20:18, zcj 写道: > From: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> > > stable inclusion > from stable-v5.10.44 > commit e0b518a2eb44d8a74c19e50f79a8ed393e96d634 > bugzilla:https://bugzilla.openeuler.org/show_bug.cgi?id=463 > CVE: NA > > ------------------------------------------------- > > commit dbec64b11c65d74f31427e2b9d5746fbf17bf840 upstream. > > bit-mask for pins 0 to 4 is BIT(0) to BIT(4) however we ended up with BIT(n - 1) > which is not right, and this was caught by below usban check > > UBSAN: shift-out-of-bounds in drivers/gpio/gpio-wcd934x.c:34:14 > > Fixes: 59c324683400 ("gpio: wcd934x: Add support to wcd934x gpio controller") > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> > Reviewed-by: Andy Shevchenko <andy.shevchenko(a)gmail.com> > Reviewed-by: Bjorn Andersson <bjorn.andersson(a)linaro.org> > Signed-off-by: Bartosz Golaszewski <bgolaszewski(a)baylibre.com> > Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> > Signed-off-by: zcj <2459770937(a)qq.com> > --- > drivers/gpio/gpio-wcd934x.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/gpio/gpio-wcd934x.c b/drivers/gpio/gpio-wcd934x.c > index 1cbce5990855..97e6caedf1f3 100644 > --- a/drivers/gpio/gpio-wcd934x.c > +++ b/drivers/gpio/gpio-wcd934x.c > @@ -7,7 +7,7 @@ > #include <linux/slab.h> > #include <linux/of_device.h> > > -#define WCD_PIN_MASK(p) BIT(p - 1) > +#define WCD_PIN_MASK(p) BIT(p) > #define WCD_REG_DIR_CTL_OFFSET 0x42 > #define WCD_REG_VAL_CTL_OFFSET 0x43 > #define WCD934X_NPINS 5

1 0

Re: [PATCH openEuler-21.03] regulator: fan53880: Fix missing n_voltages setting
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 20:49, lantianbaiyun 写道: > From: Axel Lin <axel.lin(a)ingics.com> > > stable inclusion > from stable-v5.10.44 > commit 5a5f5cfb5f0996d65eae3cc034513d90f4be6783 > bugzilla: https://bugzilla.openeuler.org/show_bug.cgi?id=401 > CVE: NA > > ------------------------------------------------- > > commit 34991ee96fd8477479dd15adadceb6b28b30d9b0 upstream. > > Fixes: e6dea51e2d41 ("regulator: fan53880: Add initial support") > Signed-off-by: Axel Lin <axel.lin(a)ingics.com> > Acked-by: Christoph Fritz <chf.fritz(a)googlemail.com> > Link: https://lore.kernel.org/r/20210517105325.1227393-1-axel.lin@ingics.com > Signed-off-by: Mark Brown <broonie(a)kernel.org> > Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> > Signed-off-by: lantianbaiyun <lianyi21(a)mails.ucas.ac.cn> > --- > drivers/regulator/fan53880.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/regulator/fan53880.c b/drivers/regulator/fan53880.c > index e83eb4fb1876..1684faf82ed2 100644 > --- a/drivers/regulator/fan53880.c > +++ b/drivers/regulator/fan53880.c > @@ -51,6 +51,7 @@ static const struct regulator_ops fan53880_ops = { > REGULATOR_LINEAR_RANGE(800000, 0xf, 0x73, 25000), \ > }, \ > .n_linear_ranges = 2, \ > + .n_voltages = 0x74, \ > .vsel_reg = FAN53880_LDO ## _num ## VOUT, \ > .vsel_mask = 0x7f, \ > .enable_reg = FAN53880_ENABLE, \ > @@ -76,6 +77,7 @@ static const struct regulator_desc fan53880_regulators[] = { > REGULATOR_LINEAR_RANGE(600000, 0x1f, 0xf7, 12500), > }, > .n_linear_ranges = 2, > + .n_voltages = 0xf8, > .vsel_reg = FAN53880_BUCKVOUT, > .vsel_mask = 0x7f, > .enable_reg = FAN53880_ENABLE, > @@ -95,6 +97,7 @@ static const struct regulator_desc fan53880_regulators[] = { > REGULATOR_LINEAR_RANGE(3000000, 0x4, 0x70, 25000), > }, > .n_linear_ranges = 2, > + .n_voltages = 0x71, > .vsel_reg = FAN53880_BOOSTVOUT, > .vsel_mask = 0x7f, > .enable_reg = FAN53880_ENABLE_BOOST,

1 0

Re: [PATCH openEuler-21.03] NFSv4: Fix second deadlock in nfs4_evict_inode()
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 20:55, smilezhangs 写道: > From: Trond Myklebust <trond.myklebust(a)hammerspace.com> > > stable inclusion > from stable-v5.10.44 > commit d973bd0d6e7f9b4ea976cc619e8d6e0d235b9056 > bugzilla: https://bugzilla.openeuler.org/show_bug.cgi?id=462 > CVE: NA > > ------------------------------------------------- > > commit c3aba897c6e67fa464ec02b1f17911577d619713 upstream. > > If the inode is being evicted but has to return a layout first, then > that too can cause a deadlock in the corner case where the server > reboots. > > Signed-off-by: Trond Myklebust <trond.myklebust(a)hammerspace.com> > Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> > Signed-off-by: Hang <haihangyiyuan(a)163.com> > Reviewed-by: Jian Cheng <cj.chengjian(a)huawei.com> > Signed-off-by: Wang ShaoBo <bobo.shaobowang(a)huawei.com> > --- > fs/nfs/nfs4proc.c | 9 +++++++-- > 1 file changed, 7 insertions(+), 2 deletions(-) > > diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c > index c92d6ff0fcea..eedcbe6832fb 100644 > --- a/fs/nfs/nfs4proc.c > +++ b/fs/nfs/nfs4proc.c > @@ -9619,15 +9619,20 @@ int nfs4_proc_layoutreturn(struct nfs4_layoutreturn *lrp, bool sync) > &task_setup_data.rpc_client, &msg); > > dprintk("--> %s\n", __func__); > + lrp->inode = nfs_igrab_and_active(lrp->args.inode); > if (!sync) { > - lrp->inode = nfs_igrab_and_active(lrp->args.inode); > if (!lrp->inode) { > nfs4_layoutreturn_release(lrp); > return -EAGAIN; > } > task_setup_data.flags |= RPC_TASK_ASYNC; > } > - nfs4_init_sequence(&lrp->args.seq_args, &lrp->res.seq_res, 1, 0); > + if (!lrp->inode) > + nfs4_init_sequence(&lrp->args.seq_args, &lrp->res.seq_res, 1, > + 1); > + else > + nfs4_init_sequence(&lrp->args.seq_args, &lrp->res.seq_res, 1, > + 0); > task = rpc_run_task(&task_setup_data); > if (IS_ERR(task)) > return PTR_ERR(task);

1 0

Re: [PATCH openEuler-21.03] net/nfc/rawsock.c: fix a permission check bug
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 21:10, lf 写道: > From: Jeimon <jjjinmeng.zhou(a)gmail.com> > > stable inclusion > from stable-v5.10.44 > commit 1e5cab50208c8fb7351b798cb1d569debfeb994a > bugzilla:https://bugzilla.openeuler.org/show_bug.cgi?id=371 > CVE: NA > > ------------------------------------------------- > > [ Upstream commit 8ab78863e9eff11910e1ac8bcf478060c29b379e ] > > The function rawsock_create() calls a privileged function sk_alloc(), which requires a ns-aware check to check net->user_ns, i.e., ns_capable(). However, the original code checks the init_user_ns using capable(). So we replace the capable() with ns_capable(). > > Signed-off-by: Jeimon <jjjinmeng.zhou(a)gmail.com> > Signed-off-by: David S. Miller <davem(a)davemloft.net> > Signed-off-by: Sasha Levin <sashal(a)kernel.org> > Signed-off-by: lf <15042944259(a)163.com> > --- > net/nfc/rawsock.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/net/nfc/rawsock.c b/net/nfc/rawsock.c > index 9c7eb8455ba8..5f1d438a0a23 100644 > --- a/net/nfc/rawsock.c > +++ b/net/nfc/rawsock.c > @@ -329,7 +329,7 @@ static int rawsock_create(struct net *net, struct socket *sock, > return -ESOCKTNOSUPPORT; > > if (sock->type == SOCK_RAW) { > - if (!capable(CAP_NET_RAW)) > + if (!ns_capable(net->user_ns, CAP_NET_RAW)) > return -EPERM; > sock->ops = &rawsock_raw_ops; > } else {

1 0

Re: [PATCH openEuler-21.03] net: mdiobus: get rid of a BUG_ON()
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 21:09, lf 写道: > From: Dan Carpenter <dan.carpenter(a)oracle.com> > > stable inclusion > from stable-v5.10.44 > commit be23c4af3d8a1b986fe9b43b8966797653a76ca4 > bugzilla: https://bugzilla.openeuler.org/show_bug.cgi?id=341 > CVE: NA > > -------------------------------- > > [ Upstream commit 1dde47a66d4fb181830d6fa000e5ea86907b639e ] > > We spotted a bug recently during a review where a driver was > unregistering a bus that wasn't registered, which would trigger this > BUG_ON(). Let's handle that situation more gracefully, and just print > a warning and return. > > Reported-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> > Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> > Reviewed-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> > Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> > Signed-off-by: David S. Miller <davem(a)davemloft.net> > Signed-off-by: Sasha Levin <sashal(a)kernel.org> > Signed-off-by: wangqing <wangqing(a)uniontech.com> > Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> > Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> > --- > drivers/net/phy/mdio_bus.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c > index 757e950fb745..b848439fa837 100644 > --- a/drivers/net/phy/mdio_bus.c > +++ b/drivers/net/phy/mdio_bus.c > @@ -608,7 +608,8 @@ void mdiobus_unregister(struct mii_bus *bus) > struct mdio_device *mdiodev; > int i; > > - BUG_ON(bus->state != MDIOBUS_REGISTERED); > + if (WARN_ON_ONCE(bus->state != MDIOBUS_REGISTERED)) > + return; > bus->state = MDIOBUS_UNREGISTERED; > > for (i = 0; i < PHY_MAX_ADDR; i++) {

1 0

Re: [PATCH openEuler-21.03] Revert "ACPI: sleep: Put the FACS table after using it"
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 21:18, ws 写道: > From: Zhang Rui <rui.zhang(a)intel.com> > > stable inclusion > from stable-v5.10.44 > commit afd87792db355282c4608356b98bb2dd650a6885 > Bugzilla: https://bugzilla.openeuler.org/show_bug.cgi?id=438 > CVE: NA > > ------------------------------------------------- > > commit f1ffa9d4cccc8fdf6c03fb1b3429154d22037988 upstream. > > Commit 95722237cb2a ("ACPI: sleep: Put the FACS table after using it") > puts the FACS table during initialization. > > But the hardware signature bits in the FACS table need to be accessed, > after every hibernation, to compare with the original hardware > signature. > > So there is no reason to release the FACS table mapping after > initialization. > > This reverts commit 95722237cb2ae4f7b73471058cdb19e8f4057c93. > > An alternative solution is to use acpi_gbl_FACS variable instead, which > is mapped by the ACPICA core and never released. > > Link: https://bugzilla.kernel.org/show_bug.cgi?id=212277 > Reported-by: Stephan Hohe <sth.dev(a)tejp.de> > Signed-off-by: Zhang Rui <rui.zhang(a)intel.com> > Cc: 5.8+ <stable(a)vger.kernel.org> # 5.8+ > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> > Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> > Signed-off-by: ws <3045672234(a)qq.com> > --- > drivers/acpi/sleep.c | 4 +--- > 1 file changed, 1 insertion(+), 3 deletions(-) > > diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c > index aff13bf4d947..31c9d0c8ae11 100644 > --- a/drivers/acpi/sleep.c > +++ b/drivers/acpi/sleep.c > @@ -1290,10 +1290,8 @@ static void acpi_sleep_hibernate_setup(void) > return; > > acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs); > - if (facs) { > + if (facs) > s4_hardware_signature = facs->hardware_signature; > - acpi_put_table((struct acpi_table_header *)facs); > - } > } > #else /* !CONFIG_HIBERNATION */ > static inline void acpi_sleep_hibernate_setup(void) {}

1 0

Re: [PATCH openEuler-21.03] net: mdiobus: get rid of a BUG_ON()
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 21:27, lcr 写道: > From: Dan Carpenter <dan.carpenter(a)oracle.com> > > stable inclusion > from stable-v5.10.44 > commit be23c4af3d8a1b986fe9b43b8966797653a76ca4 > bugzilla: https://bugzilla.openeuler.org/show_bug.cgi?id=341 > CVE: NA > > -------------------------------- > > [ Upstream commit 1dde47a66d4fb181830d6fa000e5ea86907b639e ] > > We spotted a bug recently during a review where a driver was > unregistering a bus that wasn't registered, which would trigger this > BUG_ON(). Let's handle that situation more gracefully, and just print > a warning and return. > > Reported-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> > Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> > Reviewed-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> > Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> > Signed-off-by: David S. Miller <davem(a)davemloft.net> > Signed-off-by: Sasha Levin <sashal(a)kernel.org> > Signed-off-by: wangqing <wangqing(a)uniontech.com> > Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> > Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> > --- > drivers/net/phy/mdio_bus.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c > index 757e950fb745..b848439fa837 100644 > --- a/drivers/net/phy/mdio_bus.c > +++ b/drivers/net/phy/mdio_bus.c > @@ -608,7 +608,8 @@ void mdiobus_unregister(struct mii_bus *bus) > struct mdio_device *mdiodev; > int i; > > - BUG_ON(bus->state != MDIOBUS_REGISTERED); > + if (WARN_ON_ONCE(bus->state != MDIOBUS_REGISTERED)) > + return; > bus->state = MDIOBUS_UNREGISTERED; > > for (i = 0; i < PHY_MAX_ADDR; i++) {

1 0

Re: [PATCH openEuler-21.03] RDMA/mlx4: Do not map the core_clock page to user space unless enabled
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 21:27, gaodawei 写道: > From: Shay Drory <shayd(a)nvidia.com> > > stable inclusion > from stable-v5.10.44 > commit cb1aa1da04882d1860f733e24aeebdbbc85724d7 > bugzilla:https://bugzilla.openeuler.org/show_bug.cgi?id=454 > CVE: NA > > ------------------------------------------------- > > commit 404e5a12691fe797486475fe28cc0b80cb8bef2c upstream. > > Currently when mlx4 maps the hca_core_clock page to the user space there > are read-modifiable registers, one of which is semaphore, on this page as > well as the clock counter. If user reads the wrong offset, it can modify > the semaphore and hang the device. > > Do not map the hca_core_clock page to the user space unless the device has > been put in a backwards compatibility mode to support this feature. > > After this patch, mlx4 core_clock won't be mapped to user space on the > majority of existing devices and the uverbs device time feature in > ibv_query_rt_values_ex() will be disabled. > > Fixes: 52033cfb5aab ("IB/mlx4: Add mmap call to map the hardware clock") > Link: https://lore.kernel.org/r/9632304e0d6790af84b3b706d8c18732bc0d5e27.16227263… > Signed-off-by: Shay Drory <shayd(a)nvidia.com> > Signed-off-by: Leon Romanovsky <leonro(a)nvidia.com> > Signed-off-by: Jason Gunthorpe <jgg(a)nvidia.com> > Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> > Signed-off-by: gaodawei <810789471(a)qq.com> > --- > drivers/infiniband/hw/mlx4/main.c | 5 +---- > drivers/net/ethernet/mellanox/mlx4/fw.c | 3 +++ > drivers/net/ethernet/mellanox/mlx4/fw.h | 1 + > drivers/net/ethernet/mellanox/mlx4/main.c | 6 ++++++ > include/linux/mlx4/device.h | 1 + > 5 files changed, 12 insertions(+), 4 deletions(-) > > diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c > index cd0fba6b0964..7b11aff8a5ea 100644 > --- a/drivers/infiniband/hw/mlx4/main.c > +++ b/drivers/infiniband/hw/mlx4/main.c > @@ -580,12 +580,9 @@ static int mlx4_ib_query_device(struct ib_device *ibdev, > props->cq_caps.max_cq_moderation_count = MLX4_MAX_CQ_COUNT; > props->cq_caps.max_cq_moderation_period = MLX4_MAX_CQ_PERIOD; > > - if (!mlx4_is_slave(dev->dev)) > - err = mlx4_get_internal_clock_params(dev->dev, &clock_params); > - > if (uhw->outlen >= resp.response_length + sizeof(resp.hca_core_clock_offset)) { > resp.response_length += sizeof(resp.hca_core_clock_offset); > - if (!err && !mlx4_is_slave(dev->dev)) { > + if (!mlx4_get_internal_clock_params(dev->dev, &clock_params)) { > resp.comp_mask |= MLX4_IB_QUERY_DEV_RESP_MASK_CORE_CLOCK_OFFSET; > resp.hca_core_clock_offset = clock_params.offset % PAGE_SIZE; > } > diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c > index f6cfec81ccc3..dc4ac1a2b6b6 100644 > --- a/drivers/net/ethernet/mellanox/mlx4/fw.c > +++ b/drivers/net/ethernet/mellanox/mlx4/fw.c > @@ -823,6 +823,7 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) > #define QUERY_DEV_CAP_MAD_DEMUX_OFFSET 0xb0 > #define QUERY_DEV_CAP_DMFS_HIGH_RATE_QPN_BASE_OFFSET 0xa8 > #define QUERY_DEV_CAP_DMFS_HIGH_RATE_QPN_RANGE_OFFSET 0xac > +#define QUERY_DEV_CAP_MAP_CLOCK_TO_USER 0xc1 > #define QUERY_DEV_CAP_QP_RATE_LIMIT_NUM_OFFSET 0xcc > #define QUERY_DEV_CAP_QP_RATE_LIMIT_MAX_OFFSET 0xd0 > #define QUERY_DEV_CAP_QP_RATE_LIMIT_MIN_OFFSET 0xd2 > @@ -841,6 +842,8 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) > > if (mlx4_is_mfunc(dev)) > disable_unsupported_roce_caps(outbox); > + MLX4_GET(field, outbox, QUERY_DEV_CAP_MAP_CLOCK_TO_USER); > + dev_cap->map_clock_to_user = field & 0x80; > MLX4_GET(field, outbox, QUERY_DEV_CAP_RSVD_QP_OFFSET); > dev_cap->reserved_qps = 1 << (field & 0xf); > MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_QP_OFFSET); > diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.h b/drivers/net/ethernet/mellanox/mlx4/fw.h > index 8f020f26ebf5..cf64e54eecb0 100644 > --- a/drivers/net/ethernet/mellanox/mlx4/fw.h > +++ b/drivers/net/ethernet/mellanox/mlx4/fw.h > @@ -131,6 +131,7 @@ struct mlx4_dev_cap { > u32 health_buffer_addrs; > struct mlx4_port_cap port_cap[MLX4_MAX_PORTS + 1]; > bool wol_port[MLX4_MAX_PORTS + 1]; > + bool map_clock_to_user; > }; > > struct mlx4_func_cap { > diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c > index c326b434734e..00c84656b2e7 100644 > --- a/drivers/net/ethernet/mellanox/mlx4/main.c > +++ b/drivers/net/ethernet/mellanox/mlx4/main.c > @@ -498,6 +498,7 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) > } > } > > + dev->caps.map_clock_to_user = dev_cap->map_clock_to_user; > dev->caps.uar_page_size = PAGE_SIZE; > dev->caps.num_uars = dev_cap->uar_size / PAGE_SIZE; > dev->caps.local_ca_ack_delay = dev_cap->local_ca_ack_delay; > @@ -1948,6 +1949,11 @@ int mlx4_get_internal_clock_params(struct mlx4_dev *dev, > if (mlx4_is_slave(dev)) > return -EOPNOTSUPP; > > + if (!dev->caps.map_clock_to_user) { > + mlx4_dbg(dev, "Map clock to user is not supported.\n"); > + return -EOPNOTSUPP; > + } > + > if (!params) > return -EINVAL; > > diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h > index 06e066e04a4b..eb8169c03d89 100644 > --- a/include/linux/mlx4/device.h > +++ b/include/linux/mlx4/device.h > @@ -631,6 +631,7 @@ struct mlx4_caps { > bool wol_port[MLX4_MAX_PORTS + 1]; > struct mlx4_rate_limit_caps rl_caps; > u32 health_buffer_addrs; > + bool map_clock_to_user; > }; > > struct mlx4_buf_list {

1 0

Re: [PATCH openEuler-21.03] NFSv4: Fix second deadlock in nfs4_evict_inode()
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 21:31, smilezhangs 写道: > From: Trond Myklebust <trond.myklebust(a)hammerspace.com> > > stable inclusion > from stable-v5.10.44 > commit d973bd0d6e7f9b4ea976cc619e8d6e0d235b9056 > bugzilla: https://bugzilla.openeuler.org/show_bug.cgi?id=462 > CVE: NA > > ------------------------------------------------- > > commit c3aba897c6e67fa464ec02b1f17911577d619713 upstream. > > If the inode is being evicted but has to return a layout first, then > that too can cause a deadlock in the corner case where the server > reboots. > > Signed-off-by: Trond Myklebust <trond.myklebust(a)hammerspace.com> > Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> > Signed-off-by: Hang <haihangyiyuan(a)163.com> > Reviewed-by: Jian Cheng <cj.chengjian(a)huawei.com> > Signed-off-by: Wang ShaoBo <bobo.shaobowang(a)huawei.com> > --- > fs/nfs/nfs4proc.c | 9 +++++++-- > 1 file changed, 7 insertions(+), 2 deletions(-) > > diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c > index c92d6ff0fcea..eedcbe6832fb 100644 > --- a/fs/nfs/nfs4proc.c > +++ b/fs/nfs/nfs4proc.c > @@ -9619,15 +9619,20 @@ int nfs4_proc_layoutreturn(struct nfs4_layoutreturn *lrp, bool sync) > &task_setup_data.rpc_client, &msg); > > dprintk("--> %s\n", __func__); > + lrp->inode = nfs_igrab_and_active(lrp->args.inode); > if (!sync) { > - lrp->inode = nfs_igrab_and_active(lrp->args.inode); > if (!lrp->inode) { > nfs4_layoutreturn_release(lrp); > return -EAGAIN; > } > task_setup_data.flags |= RPC_TASK_ASYNC; > } > - nfs4_init_sequence(&lrp->args.seq_args, &lrp->res.seq_res, 1, 0); > + if (!lrp->inode) > + nfs4_init_sequence(&lrp->args.seq_args, &lrp->res.seq_res, 1, > + 1); > + else > + nfs4_init_sequence(&lrp->args.seq_args, &lrp->res.seq_res, 1, > + 0); > task = rpc_run_task(&task_setup_data); > if (IS_ERR(task)) > return PTR_ERR(task);

1 0

Re: [PATCH openEuler-21.03] scsi: core: Only put parent device if host state differs from SHOST_CREATED
by chengjian (D) 26 Oct '21

26 Oct '21

Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> 在 2021/10/23 21:37, yangshuo 写道: > From: Ming Lei <ming.lei(a)redhat.com> > > stable inclusion > from stable-v5.10.44 > commit 5b537408f2733d510060e72596befa44c3435cb6 > bugzilla:https://bugzilla.openeuler.org/show_bug.cgi?id=403 > CVE: NA > > ------------------------------------------------- > > commit 1e0d4e6225996f05271de1ebcb1a7c9381af0b27 upstream. > > get_device(shost->shost_gendev.parent) is called after host state has > switched to SHOST_RUNNING. scsi_host_dev_release() shouldn't release the > parent device if host state is still SHOST_CREATED. > > Link: https://lore.kernel.org/r/20210602133029.2864069-5-ming.lei@redhat.com > Cc: Bart Van Assche <bvanassche(a)acm.org> > Cc: John Garry <john.garry(a)huawei.com> > Cc: Hannes Reinecke <hare(a)suse.de> > Tested-by: John Garry <john.garry(a)huawei.com> > Reviewed-by: John Garry <john.garry(a)huawei.com> > Signed-off-by: Ming Lei <ming.lei(a)redhat.com> > Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> > Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> > Signed-off-by: yangshuo <look4polaris(a)163.com> > --- > drivers/scsi/hosts.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c > index 2f162603876f..f1b7061aa0d9 100644 > --- a/drivers/scsi/hosts.c > +++ b/drivers/scsi/hosts.c > @@ -345,7 +345,7 @@ static void scsi_host_dev_release(struct device *dev) > > ida_simple_remove(&host_index_ida, shost->host_no); > > - if (parent) > + if (shost->shost_state != SHOST_CREATED) > put_device(parent); > kfree(shost); > }

1 0