November 2021 - Kernel - mailweb.openeuler.org

【Meeting Notice】openEuler kernel 技术分享第十四期 & 双周例会 Time: 2021-11-19 14:00-16:30
by Meeting Book 18 Nov '21

18 Nov '21

1 0

[PATCH openEuler-1.0-LTS] net: bridge: fix stale eth hdr pointer in br_dev_xmit
by Yang Yingliang 18 Nov '21

18 Nov '21

From: Nikolay Aleksandrov <nikolay(a)cumulusnetworks.com> mainline inclusion from mainline-v5.6-rc4 commit 823d81b0fa2cd83a640734e74caee338b5d3c093 category: bugfix bugzilla: 185773 CVE: NA ------------------------------------------------- In br_dev_xmit() we perform vlan filtering in br_allowed_ingress() but if the packet has the vlan header inside (e.g. bridge with disabled tx-vlan-offload) then the vlan filtering code will use skb_vlan_untag() to extract the vid before filtering which in turn calls pskb_may_pull() and we may end up with a stale eth pointer. Moreover the cached eth header pointer will generally be wrong after that operation. Remove the eth header caching and just use eth_hdr() directly, the compiler does the right thing and calculates it only once so we don't lose anything. Fixes: 057658cb33fb ("bridge: suppress arp pkts on BR_NEIGH_SUPPRESS ports") Signed-off-by: Nikolay Aleksandrov <nikolay(a)cumulusnetworks.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Huang Guobin <huangguobin4(a)huawei.com> Reviewed-by: Wei Yongjun <weiyongjun1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- net/bridge/br_device.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index a350c05b7ff5e..7b7784bb1cb99 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -39,7 +39,6 @@ netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev) struct pcpu_sw_netstats *brstats = this_cpu_ptr(br->stats); const struct nf_br_ops *nf_ops; const unsigned char *dest; - struct ethhdr *eth; u16 vid = 0; rcu_read_lock(); @@ -58,15 +57,14 @@ netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev) BR_INPUT_SKB_CB(skb)->brdev = dev; skb_reset_mac_header(skb); - eth = eth_hdr(skb); skb_pull(skb, ETH_HLEN); if (!br_allowed_ingress(br, br_vlan_group_rcu(br), skb, &vid)) goto out; if (IS_ENABLED(CONFIG_INET) && - (eth->h_proto == htons(ETH_P_ARP) || - eth->h_proto == htons(ETH_P_RARP)) && + (eth_hdr(skb)->h_proto == htons(ETH_P_ARP) || + eth_hdr(skb)->h_proto == htons(ETH_P_RARP)) && br->neigh_suppress_enabled) { br_do_proxy_suppress_arp(skb, br, vid, NULL); } else if (IS_ENABLED(CONFIG_IPV6) && -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS] x86/entry: Make entry_64_compat.S objtool clean
by Yang Yingliang 17 Nov '21

17 Nov '21

From: Peter Zijlstra <peterz(a)infradead.org> mainline inclusion from mainline-v5.8-rc1 commit 1c3e5d3f60e26415d4227aa1193cf9e2db4df834 category: feature bugzilla: 175666 CVE: NA --------------------------- Currently entry_64_compat is exempt from objtool, but with vmlinux mode there is no hiding it. Make the following changes to make it pass: - change entry_SYSENTER_compat to STT_NOTYPE; it's not a function and doesn't have function type stack setup. - mark all STT_NOTYPE symbols with UNWIND_HINT_EMPTY; so we do validate them and don't treat them as unreachable. - don't abuse RSP as a temp register, this confuses objtool mightily as it (rightfully) thinks we're doing unspeakable things to the stack. Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre(a)oracle.com> Acked-by: Andy Lutomirski <luto(a)kernel.org> Link: https://lkml.kernel.org/r/20200505134341.272248024@linutronix.de Signed-off-by: Wang ShaoBo <bobo.shaobowang(a)huawei.com> Conflicts: arch/x86/entry/entry_64_compat.S [wangshaobo: change ENDPROC to END, avoid objtool skipping STT_FUNC type check] Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/x86/entry/Makefile | 2 -- arch/x86/entry/entry_64_compat.S | 17 +++++++++++++++-- 2 files changed, 15 insertions(+), 4 deletions(-) diff --git a/arch/x86/entry/Makefile b/arch/x86/entry/Makefile index 06fc70cf5433d..e71890149ce0e 100644 --- a/arch/x86/entry/Makefile +++ b/arch/x86/entry/Makefile @@ -3,8 +3,6 @@ # Makefile for the x86 low level entry code # -OBJECT_FILES_NON_STANDARD_entry_64_compat.o := y - CFLAGS_syscall_64.o += $(call cc-option,-Wno-override-init,) CFLAGS_syscall_32.o += $(call cc-option,-Wno-override-init,) obj-y := entry_$(BITS).o thunk_$(BITS).o syscall_$(BITS).o diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S index 40d2834a8101e..f326e0c6e8dd8 100644 --- a/arch/x86/entry/entry_64_compat.S +++ b/arch/x86/entry/entry_64_compat.S @@ -47,11 +47,14 @@ * 0(%ebp) arg6 */ ENTRY(entry_SYSENTER_compat) + UNWIND_HINT_EMPTY /* Interrupts are off on entry. */ SWAPGS /* We are about to clobber %rsp anyway, clobbering here is OK */ - SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp + pushq %rax + SWITCH_TO_KERNEL_CR3 scratch_reg=%rax + popq %rax movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp @@ -104,6 +107,9 @@ ENTRY(entry_SYSENTER_compat) xorl %r14d, %r14d /* nospec r14 */ pushq $0 /* pt_regs->r15 = 0 */ xorl %r15d, %r15d /* nospec r15 */ + + UNWIND_HINT_REGS + cld /* @@ -147,7 +153,7 @@ ENTRY(entry_SYSENTER_compat) popfq jmp .Lsysenter_flags_fixed GLOBAL(__end_entry_SYSENTER_compat) -ENDPROC(entry_SYSENTER_compat) +END(entry_SYSENTER_compat) /* * 32-bit SYSCALL entry. @@ -197,6 +203,7 @@ ENDPROC(entry_SYSENTER_compat) * 0(%esp) arg6 */ ENTRY(entry_SYSCALL_compat) + UNWIND_HINT_EMPTY /* Interrupts are off on entry. */ swapgs @@ -247,6 +254,8 @@ GLOBAL(entry_SYSCALL_compat_after_hwframe) pushq $0 /* pt_regs->r15 = 0 */ xorl %r15d, %r15d /* nospec r15 */ + UNWIND_HINT_REGS + /* * User mode is traced as though IRQs are on, and SYSENTER * turned them off. @@ -335,6 +344,7 @@ END(entry_SYSCALL_compat) * ebp arg6 */ ENTRY(entry_INT80_compat) + UNWIND_HINT_EMPTY /* * Interrupts are off on entry. */ @@ -396,6 +406,9 @@ ENTRY(entry_INT80_compat) xorl %r14d, %r14d /* nospec r14 */ pushq %r15 /* pt_regs->r15 */ xorl %r15d, %r15d /* nospec r15 */ + + UNWIND_HINT_REGS + cld /* -- 2.25.1

1 0

[PATCH openEuler-5.10 0/3] support test GCM/CCM mode for SM4
by shenzijun 17 Nov '21

17 Nov '21

From: 沈子俊 <shenzijun(a)kylinos.cn> The GCM/CCM mode of SM4 is defined in the RFC 8998 specification: https://datatracker.ietf.org/doc/html/rfc8998 沈子俊 (3): crypto: tcrypt - Fix missing return value check crypto: testmgr - Add GCM/CCM mode test of SM4 algorithm crypto: tcrypt - add GCM/CCM mode test for SM4 algorithm crypto/tcrypt.c | 73 ++++++++++++++++++++--- crypto/testmgr.c | 29 ++++++++++ crypto/testmgr.h | 148 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 241 insertions(+), 9 deletions(-) -- 2.30.0

3 5

【Meeting Notice】openEuler kernel 技术分享第十四期 & 双周例会 Time: 2021-11-19 14:00-16:30
by Meeting Book 16 Nov '21

16 Nov '21

1 0

[PATCH openEuler-1.0-LTS] io_uring: fix ltout double free on completion race
by Yang Yingliang 15 Nov '21

15 Nov '21

From: Pavel Begunkov <asml.silence(a)gmail.com> mainline inclusion from mainline-v5.13-rc2 commit 447c19f3b5074409c794b350b10306e1da1ef4ba category: bugfix bugzilla: 185736 CVE: NA ----------------------------------------------- Always remove linked timeout on io_link_timeout_fn() from the master request link list, otherwise we may get use-after-free when first io_link_timeout_fn() puts linked timeout in the fail path, and then will be found and put on master's free. Cc: stable(a)vger.kernel.org # 5.10+ Fixes: 90cd7e424969d ("io_uring: track link timeout's master explicitly") Reported-and-tested-by: syzbot+5a864149dd970b546223(a)syzkaller.appspotmail.com Signed-off-by: Pavel Begunkov <asml.silence(a)gmail.com> Link: https://lore.kernel.org/r/69c46bf6ce37fec4fdcd98f0882e18eb07ce693a.16209901… Signed-off-by: Jens Axboe <axboe(a)kernel.dk> conflicts: fs/io_uring.c Signed-off-by: Ye Bin <yebin10(a)huawei.com> Reviewed-by: Zhang Yi <yi.zhang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/io_uring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 226e9f123f654..da61eeaf64e88 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -5925,8 +5925,8 @@ static enum hrtimer_restart io_link_timeout_fn(struct hrtimer *timer) if (!list_empty(&req->link_list)) { prev = list_entry(req->link_list.prev, struct io_kiocb, link_list); + list_del_init(&req->link_list); if (refcount_inc_not_zero(&prev->refs)) { - list_del_init(&req->link_list); prev->flags &= ~REQ_F_LINK_TIMEOUT; } else prev = NULL; -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS v3 00/26] support psi feature
by Liu Xinpeng 15 Nov '21

15 Nov '21

backport psi feature and avoid kabi change bugzilla: https://gitee.com/openeuler/kernel/issues/I47QS2 Changes since v2: 1.Remove workingset_restore field.After adding WORKINGSET_RESTORE, memcg_stat_item values will change. enum memcg_stat_item { MEMCG_CACHE = NR_VM_NODE_STAT_ITEMS, MEMCG_RSS, MEMCG_RSS_HUGE, ... Thanks to Cheng jian. 2.Patch 22 and patch 23's commit add "from mainline-v5.10.78" Baruch Siach (1): psi: fix reference to kernel commandline enable Dan Schatzberg (1): kernel/sched/psi.c: expose pressure metrics on root cgroup Johannes Weiner (12): mm: workingset: tell cache transitions from workingset thrashing sched: loadavg: consolidate LOAD_INT, LOAD_FRAC, CALC_LOAD sched: loadavg: make calc_load_n() public sched: sched.h: make rq locking and clock functions available in stats.h sched: introduce this_rq_lock_irq() psi: pressure stall information for CPU, memory, and IO psi: cgroup support psi: make disabling/enabling easier for vendor kernels psi: fix aggregation idle shut-off psi: avoid divide-by-zero crash inside virtual machines fs: kernfs: add poll file operation sched/psi: Fix sampling error and rare div0 crashes with cgroups and high uptime Josef Bacik (1): blk-iolatency: use a percentile approache for ssd's Liu Xinpeng (2): psi:enable psi in config psi:avoid kabi change Miklos Szeredi (1): fuse: ignore PG_workingset after stealing Olof Johansson (1): kernel/sched/psi.c: simplify cgroup_move_task() Suren Baghdasaryan (6): psi: introduce state_mask to represent stalled psi states psi: make psi_enable static psi: rename psi fields in preparation for psi trigger addition psi: split update_stats into parts psi: track changed states include/: refactor headers to allow kthread.h inclusion in psi_types.h Yafang Shao (1): mm, memcg: add workingset_restore in memory.stat Documentation/accounting/psi.txt | 73 +++ Documentation/admin-guide/cgroup-v2.rst | 22 + Documentation/admin-guide/kernel-parameters.txt | 4 + arch/arm64/configs/openeuler_defconfig | 2 + arch/powerpc/platforms/cell/cpufreq_spudemand.c | 2 +- arch/powerpc/platforms/cell/spufs/sched.c | 9 +- arch/s390/appldata/appldata_os.c | 4 - arch/x86/configs/openeuler_defconfig | 2 + block/blk-iolatency.c | 183 +++++- drivers/cpuidle/governors/menu.c | 4 - drivers/spi/spi-rockchip.c | 1 + fs/fuse/dev.c | 1 + fs/kernfs/file.c | 31 +- fs/proc/loadavg.c | 3 - include/linux/cgroup-defs.h | 12 + include/linux/cgroup.h | 17 + include/linux/kernfs.h | 8 + include/linux/kthread.h | 4 + include/linux/page-flags.h | 5 + include/linux/psi.h | 55 ++ include/linux/psi_types.h | 95 +++ include/linux/sched.h | 13 + include/linux/sched/loadavg.h | 24 +- include/linux/swap.h | 1 + include/trace/events/mmflags.h | 1 + init/Kconfig | 28 + kernel/cgroup/cgroup.c | 55 +- kernel/debug/kdb/kdb_main.c | 7 +- kernel/fork.c | 4 + kernel/kthread.c | 3 + kernel/sched/Makefile | 1 + kernel/sched/core.c | 16 +- kernel/sched/loadavg.c | 139 ++-- kernel/sched/psi.c | 823 ++++++++++++++++++++++++ kernel/sched/sched.h | 178 ++--- kernel/sched/stats.h | 86 +++ kernel/workqueue.c | 23 + kernel/workqueue_internal.h | 6 +- mm/compaction.c | 5 + mm/filemap.c | 20 +- mm/huge_memory.c | 1 + mm/migrate.c | 2 + mm/page_alloc.c | 9 + mm/swap_state.c | 1 + mm/vmscan.c | 10 + mm/workingset.c | 113 +++- 46 files changed, 1827 insertions(+), 279 deletions(-) create mode 100644 Documentation/accounting/psi.txt create mode 100644 include/linux/psi.h create mode 100644 include/linux/psi_types.h create mode 100644 kernel/sched/psi.c -- 1.8.3.1

1 26

[PATCH openEuler-5.10 01/20] blk-mq: don't free tags if the tag_set is used by other device in queue initialztion
by Zheng Zengkai 15 Nov '21

15 Nov '21

From: Ye Bin <yebin10(a)huawei.com> mainline inclusion from mainline-v5.16 commit a846a8e6c9a5949582c5a6a8bbc83a7d27fd891e category: bugfix bugzilla: 185668 https://gitee.com/openeuler/kernel/issues/I4DDEL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… ----------------------------------------------- We got UAF report on v5.10 as follows: [ 1446.674930] ================================================================== [ 1446.675970] BUG: KASAN: use-after-free in blk_mq_get_driver_tag+0x9a4/0xa90 [ 1446.676902] Read of size 8 at addr ffff8880185afd10 by task kworker/1:2/12348 [ 1446.677851] [ 1446.678073] CPU: 1 PID: 12348 Comm: kworker/1:2 Not tainted 5.10.0-10177-gc9c81b1e346a #2 [ 1446.679168] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1446.680692] Workqueue: kthrotld blk_throtl_dispatch_work_fn [ 1446.681448] Call Trace: [ 1446.681800] dump_stack+0x9b/0xce [ 1446.682916] print_address_description.constprop.6+0x3e/0x60 [ 1446.685999] kasan_report.cold.9+0x22/0x3a [ 1446.687186] blk_mq_get_driver_tag+0x9a4/0xa90 [ 1446.687785] blk_mq_dispatch_rq_list+0x21a/0x1d40 [ 1446.692576] __blk_mq_do_dispatch_sched+0x394/0x830 [ 1446.695758] __blk_mq_sched_dispatch_requests+0x398/0x4f0 [ 1446.698279] blk_mq_sched_dispatch_requests+0xdf/0x140 [ 1446.698967] __blk_mq_run_hw_queue+0xc0/0x270 [ 1446.699561] __blk_mq_delay_run_hw_queue+0x4cc/0x550 [ 1446.701407] blk_mq_run_hw_queue+0x13b/0x2b0 [ 1446.702593] blk_mq_sched_insert_requests+0x1de/0x390 [ 1446.703309] blk_mq_flush_plug_list+0x4b4/0x760 [ 1446.705408] blk_flush_plug_list+0x2c5/0x480 [ 1446.708471] blk_finish_plug+0x55/0xa0 [ 1446.708980] blk_throtl_dispatch_work_fn+0x23b/0x2e0 [ 1446.711236] process_one_work+0x6d4/0xfe0 [ 1446.711778] worker_thread+0x91/0xc80 [ 1446.713400] kthread+0x32d/0x3f0 [ 1446.714362] ret_from_fork+0x1f/0x30 [ 1446.714846] [ 1446.715062] Allocated by task 1: [ 1446.715509] kasan_save_stack+0x19/0x40 [ 1446.716026] __kasan_kmalloc.constprop.1+0xc1/0xd0 [ 1446.716673] blk_mq_init_tags+0x6d/0x330 [ 1446.717207] blk_mq_alloc_rq_map+0x50/0x1c0 [ 1446.717769] __blk_mq_alloc_map_and_request+0xe5/0x320 [ 1446.718459] blk_mq_alloc_tag_set+0x679/0xdc0 [ 1446.719050] scsi_add_host_with_dma.cold.3+0xa0/0x5db [ 1446.719736] virtscsi_probe+0x7bf/0xbd0 [ 1446.720265] virtio_dev_probe+0x402/0x6c0 [ 1446.720808] really_probe+0x276/0xde0 [ 1446.721320] driver_probe_device+0x267/0x3d0 [ 1446.721892] device_driver_attach+0xfe/0x140 [ 1446.722491] __driver_attach+0x13a/0x2c0 [ 1446.723037] bus_for_each_dev+0x146/0x1c0 [ 1446.723603] bus_add_driver+0x3fc/0x680 [ 1446.724145] driver_register+0x1c0/0x400 [ 1446.724693] init+0xa2/0xe8 [ 1446.725091] do_one_initcall+0x9e/0x310 [ 1446.725626] kernel_init_freeable+0xc56/0xcb9 [ 1446.726231] kernel_init+0x11/0x198 [ 1446.726714] ret_from_fork+0x1f/0x30 [ 1446.727212] [ 1446.727433] Freed by task 26992: [ 1446.727882] kasan_save_stack+0x19/0x40 [ 1446.728420] kasan_set_track+0x1c/0x30 [ 1446.728943] kasan_set_free_info+0x1b/0x30 [ 1446.729517] __kasan_slab_free+0x111/0x160 [ 1446.730084] kfree+0xb8/0x520 [ 1446.730507] blk_mq_free_map_and_requests+0x10b/0x1b0 [ 1446.731206] blk_mq_realloc_hw_ctxs+0x8cb/0x15b0 [ 1446.731844] blk_mq_init_allocated_queue+0x374/0x1380 [ 1446.732540] blk_mq_init_queue_data+0x7f/0xd0 [ 1446.733155] scsi_mq_alloc_queue+0x45/0x170 [ 1446.733730] scsi_alloc_sdev+0x73c/0xb20 [ 1446.734281] scsi_probe_and_add_lun+0x9a6/0x2d90 [ 1446.734916] __scsi_scan_target+0x208/0xc50 [ 1446.735500] scsi_scan_channel.part.3+0x113/0x170 [ 1446.736149] scsi_scan_host_selected+0x25a/0x360 [ 1446.736783] store_scan+0x290/0x2d0 [ 1446.737275] dev_attr_store+0x55/0x80 [ 1446.737782] sysfs_kf_write+0x132/0x190 [ 1446.738313] kernfs_fop_write_iter+0x319/0x4b0 [ 1446.738921] new_sync_write+0x40e/0x5c0 [ 1446.739429] vfs_write+0x519/0x720 [ 1446.739877] ksys_write+0xf8/0x1f0 [ 1446.740332] do_syscall_64+0x2d/0x40 [ 1446.740802] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1446.741462] [ 1446.741670] The buggy address belongs to the object at ffff8880185afd00 [ 1446.741670] which belongs to the cache kmalloc-256 of size 256 [ 1446.743276] The buggy address is located 16 bytes inside of [ 1446.743276] 256-byte region [ffff8880185afd00, ffff8880185afe00) [ 1446.744765] The buggy address belongs to the page: [ 1446.745416] page:ffffea0000616b00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x185ac [ 1446.746694] head:ffffea0000616b00 order:2 compound_mapcount:0 compound_pincount:0 [ 1446.747719] flags: 0x1fffff80010200(slab|head) [ 1446.748337] raw: 001fffff80010200 ffffea00006a3208 ffffea000061bf08 ffff88801004f240 [ 1446.749404] raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 [ 1446.750455] page dumped because: kasan: bad access detected [ 1446.751227] [ 1446.751445] Memory state around the buggy address: [ 1446.752102] ffff8880185afc00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1446.753090] ffff8880185afc80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1446.754079] >ffff8880185afd00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1446.755065] ^ [ 1446.755589] ffff8880185afd80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1446.756574] ffff8880185afe00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1446.757566] ================================================================== Flag 'BLK_MQ_F_TAG_QUEUE_SHARED' will be set if the second device on the same host initializes it's queue successfully. However, if the second device failed to allocate memory in blk_mq_alloc_and_init_hctx() from blk_mq_realloc_hw_ctxs() from blk_mq_init_allocated_queue(), __blk_mq_free_map_and_rqs() will be called on error path, and if 'BLK_MQ_TAG_HCTX_SHARED' is not set, 'tag_set->tags' will be freed while it's still used by the first device. To fix this issue we move release newly allocated hardware context from blk_mq_realloc_hw_ctxs to __blk_mq_update_nr_hw_queues. As there is needn't to release hardware context in blk_mq_init_allocated_queue. Fixes: 868f2f0b7206 ("blk-mq: dynamic h/w context count") Signed-off-by: Ye Bin <yebin10(a)huawei.com> Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> Reviewed-by: Ming Lei <ming.lei(a)redhat.com> Link: https://lore.kernel.org/r/20211108074019.1058843-1-yebin10@huawei.com Signed-off-by: Jens Axboe <axboe(a)kernel.dk> conflicts: block/blk-mq.c Signed-off-by: Ye Bin <yebin10(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Chen Jun <chenjun102(a)huawei.com> --- block/blk-mq.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index bc7a04cc2acf..fac25524e99e 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -3237,8 +3237,6 @@ static void blk_mq_realloc_hw_ctxs(struct blk_mq_tag_set *set, struct blk_mq_hw_ctx *hctx = hctxs[j]; if (hctx) { - if (hctx->tags) - blk_mq_free_map_and_requests(set, j); blk_mq_exit_hctx(q, set, hctx, j); hctxs[j] = NULL; } @@ -3724,8 +3722,13 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, list_for_each_entry(q, &set->tag_list, tag_set_list) { blk_mq_realloc_hw_ctxs(set, q); if (q->nr_hw_queues != set->nr_hw_queues) { + int i = prev_nr_hw_queues; + pr_warn("Increasing nr_hw_queues to %d fails, fallback to %d\n", nr_hw_queues, prev_nr_hw_queues); + for (; i < set->nr_hw_queues; i++) + blk_mq_free_map_and_requests(set, i); + set->nr_hw_queues = prev_nr_hw_queues; blk_mq_map_queues(&set->map[HCTX_TYPE_DEFAULT]); goto fallback; -- 2.20.1

1 19

[PATCH openEuler-5.10 01/13] scsi: core: Put LLD module refcnt after SCSI device is released
by Zheng Zengkai 15 Nov '21

15 Nov '21

From: Ming Lei <ming.lei(a)redhat.com> stable inclusion from stable-5.10.78 commit 7b57c38d12aed1b5d92f74748bed25e0d041729f bugzilla: 185700 https://gitee.com/openeuler/kernel/issues/I4IAU2 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit f2b85040acec9a928b4eb1b57a989324e8e38d3f upstream. SCSI host release is triggered when SCSI device is freed. We have to make sure that the low-level device driver module won't be unloaded before SCSI host instance is released because shost->hostt is required in the release handler. Make sure to put LLD module refcnt after SCSI device is released. Fixes a kernel panic of 'BUG: unable to handle page fault for address' reported by Changhui and Yi. Link: https://lore.kernel.org/r/20211008050118.1440686-1-ming.lei@redhat.com Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Reported-by: Changhui Zhong <czhong(a)redhat.com> Reported-by: Yi Zhang <yi.zhang(a)redhat.com> Tested-by: Yi Zhang <yi.zhang(a)redhat.com> Signed-off-by: Ming Lei <ming.lei(a)redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Chen Jun <chenjun102(a)huawei.com> Acked-by: Weilong Chen <chenweilong(a)huawei.com> Signed-off-by: Chen Jun <chenjun102(a)huawei.com> --- drivers/scsi/scsi.c | 4 +++- drivers/scsi/scsi_sysfs.c | 9 +++++++++ 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 24619c3bebd5..6ad834d61d4c 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -545,8 +545,10 @@ EXPORT_SYMBOL(scsi_device_get); */ void scsi_device_put(struct scsi_device *sdev) { - module_put(sdev->host->hostt->module); + struct module *mod = sdev->host->hostt->module; + put_device(&sdev->sdev_gendev); + module_put(mod); } EXPORT_SYMBOL(scsi_device_put); diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 8173b67ec7b0..1378bb1a7371 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -450,9 +450,12 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work) struct scsi_vpd *vpd_pg80 = NULL, *vpd_pg83 = NULL; struct scsi_vpd *vpd_pg0 = NULL, *vpd_pg89 = NULL; unsigned long flags; + struct module *mod; sdev = container_of(work, struct scsi_device, ew.work); + mod = sdev->host->hostt->module; + scsi_dh_release_device(sdev); parent = sdev->sdev_gendev.parent; @@ -501,11 +504,17 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work) if (parent) put_device(parent); + module_put(mod); } static void scsi_device_dev_release(struct device *dev) { struct scsi_device *sdp = to_scsi_device(dev); + + /* Set module pointer as NULL in case of module unloading */ + if (!try_module_get(sdp->host->hostt->module)) + sdp->host->hostt->module = NULL; + execute_in_process_context(scsi_device_dev_release_usercontext, &sdp->ew); } -- 2.20.1

1 12

[PATCH openEuler-5.10 01/20] blk-cgroup: synchronize blkg creation against policy deactivation
by Zheng Zengkai 15 Nov '21

15 Nov '21

From: Yu Kuai <yukuai3(a)huawei.com> mainline inclusion from mainline commit 0c9d338c8443b06da8e8d3bfce824c5ea6d3488f category: bugfix bugzilla: 182378 https://gitee.com/openeuler/kernel/issues/I4DDEL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- Our test reports a null pointer dereference: [ 168.534653] ================================================================== [ 168.535614] Disabling lock debugging due to kernel taint [ 168.536346] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 168.537274] #PF: supervisor read access in kernel mode [ 168.537964] #PF: error_code(0x0000) - not-present page [ 168.538667] PGD 0 P4D 0 [ 168.539025] Oops: 0000 [#1] PREEMPT SMP KASAN [ 168.539656] CPU: 13 PID: 759 Comm: bash Tainted: G B 5.15.0-rc2-next-202100 [ 168.540954] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_0738364 [ 168.542736] RIP: 0010:bfq_pd_init+0x88/0x1e0 [ 168.543318] Code: 98 00 00 00 e8 c9 e4 5b ff 4c 8b 65 00 49 8d 7c 24 08 e8 bb e4 5b ff 4d0 [ 168.545803] RSP: 0018:ffff88817095f9c0 EFLAGS: 00010002 [ 168.546497] RAX: 0000000000000001 RBX: ffff888101a1c000 RCX: 0000000000000000 [ 168.547438] RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff888106553428 [ 168.548402] RBP: ffff888106553400 R08: ffffffff961bcaf4 R09: 0000000000000001 [ 168.549365] R10: ffffffffa2e16c27 R11: fffffbfff45c2d84 R12: 0000000000000000 [ 168.550291] R13: ffff888101a1c098 R14: ffff88810c7a08c8 R15: ffffffffa55541a0 [ 168.551221] FS: 00007fac75227700(0000) GS:ffff88839ba80000(0000) knlGS:0000000000000000 [ 168.552278] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 168.553040] CR2: 0000000000000008 CR3: 0000000165ce7000 CR4: 00000000000006e0 [ 168.554000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 168.554929] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 168.555888] Call Trace: [ 168.556221] <TASK> [ 168.556510] blkg_create+0x1c0/0x8c0 [ 168.556989] blkg_conf_prep+0x574/0x650 [ 168.557502] ? stack_trace_save+0x99/0xd0 [ 168.558033] ? blkcg_conf_open_bdev+0x1b0/0x1b0 [ 168.558629] tg_set_conf.constprop.0+0xb9/0x280 [ 168.559231] ? kasan_set_track+0x29/0x40 [ 168.559758] ? kasan_set_free_info+0x30/0x60 [ 168.560344] ? tg_set_limit+0xae0/0xae0 [ 168.560853] ? do_sys_openat2+0x33b/0x640 [ 168.561383] ? do_sys_open+0xa2/0x100 [ 168.561877] ? __x64_sys_open+0x4e/0x60 [ 168.562383] ? __kasan_check_write+0x20/0x30 [ 168.562951] ? copyin+0x48/0x70 [ 168.563390] ? _copy_from_iter+0x234/0x9e0 [ 168.563948] tg_set_conf_u64+0x17/0x20 [ 168.564467] cgroup_file_write+0x1ad/0x380 [ 168.565014] ? cgroup_file_poll+0x80/0x80 [ 168.565568] ? __mutex_lock_slowpath+0x30/0x30 [ 168.566165] ? pgd_free+0x100/0x160 [ 168.566649] kernfs_fop_write_iter+0x21d/0x340 [ 168.567246] ? cgroup_file_poll+0x80/0x80 [ 168.567796] new_sync_write+0x29f/0x3c0 [ 168.568314] ? new_sync_read+0x410/0x410 [ 168.568840] ? __handle_mm_fault+0x1c97/0x2d80 [ 168.569425] ? copy_page_range+0x2b10/0x2b10 [ 168.570007] ? _raw_read_lock_bh+0xa0/0xa0 [ 168.570622] vfs_write+0x46e/0x630 [ 168.571091] ksys_write+0xcd/0x1e0 [ 168.571563] ? __x64_sys_read+0x60/0x60 [ 168.572081] ? __kasan_check_write+0x20/0x30 [ 168.572659] ? do_user_addr_fault+0x446/0xff0 [ 168.573264] __x64_sys_write+0x46/0x60 [ 168.573774] do_syscall_64+0x35/0x80 [ 168.574264] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 168.574960] RIP: 0033:0x7fac74915130 [ 168.575456] Code: 73 01 c3 48 8b 0d 58 ed 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 444 [ 168.577969] RSP: 002b:00007ffc3080e288 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 168.578986] RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007fac74915130 [ 168.579937] RDX: 0000000000000009 RSI: 000056007669f080 RDI: 0000000000000001 [ 168.580884] RBP: 000056007669f080 R08: 000000000000000a R09: 00007fac75227700 [ 168.581841] R10: 000056007655c8f0 R11: 0000000000000246 R12: 0000000000000009 [ 168.582796] R13: 0000000000000001 R14: 00007fac74be55e0 R15: 00007fac74be08c0 [ 168.583757] </TASK> [ 168.584063] Modules linked in: [ 168.584494] CR2: 0000000000000008 [ 168.584964] ---[ end trace 2475611ad0f77a1a ]--- This is because blkg_alloc() is called from blkg_conf_prep() without holding 'q->queue_lock', and elevator is exited before blkg_create(): thread 1 thread 2 blkg_conf_prep spin_lock_irq(&q->queue_lock); blkg_lookup_check -> return NULL spin_unlock_irq(&q->queue_lock); blkg_alloc blkcg_policy_enabled -> true pd = ->pd_alloc_fn blkg->pd[i] = pd blk_mq_exit_sched bfq_exit_queue blkcg_deactivate_policy spin_lock_irq(&q->queue_lock); __clear_bit(pol->plid, q->blkcg_pols); spin_unlock_irq(&q->queue_lock); q->elevator = NULL; spin_lock_irq(&q->queue_lock); blkg_create if (blkg->pd[i]) ->pd_init_fn -> q->elevator is NULL spin_unlock_irq(&q->queue_lock); Because blkcg_deactivate_policy() requires queue to be frozen, we can grab q_usage_counter to synchoronize blkg_conf_prep() against blkcg_deactivate_policy(). Fixes: e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support") Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> Acked-by: Tejun Heo <tj(a)kernel.org> Link: https://lore.kernel.org/r/20211020014036.2141723-1-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Conflict: block/blk-cgroup.c - commit ed6cddefdfd3 ("block: convert the rest of block to bdev_get_queue") is not backported. Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Chen Jun <chenjun102(a)huawei.com> --- block/blk-cgroup.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index 5b19665bc486..37a5dbd2c4e4 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -620,6 +620,14 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol, q = disk->queue; + /* + * blkcg_deactivate_policy() requires queue to be frozen, we can grab + * q_usage_counter to prevent concurrent with blkcg_deactivate_policy(). + */ + ret = blk_queue_enter(q, 0); + if (ret) + return ret; + rcu_read_lock(); spin_lock_irq(&q->queue_lock); @@ -689,6 +697,7 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol, goto success; } success: + blk_queue_exit(q); ctx->disk = disk; ctx->blkg = blkg; ctx->body = input; @@ -701,6 +710,7 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol, rcu_read_unlock(); fail: put_disk_and_module(disk); + blk_queue_exit(q); /* * If queue was bypassing, we should retry. Do so after a * short msleep(). It isn't strictly necessary but queue -- 2.20.1

1 19