February 2022 - Kernel - mailweb.openeuler.org

[PATCH openEuler-1.0-LTS] mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page()
by Yang Yingliang 28 Feb '22

28 Feb '22

From: Liu Shixin <liushixin2(a)huawei.com> mainline inclusion from linux-v5.16-rc7 commit 2a57d83c78f889bf3f54eede908d0643c40d5418 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4LE22 CVE: NA -------------------------------- Hulk Robot reported a panic in put_page_testzero() when testing madvise() with MADV_SOFT_OFFLINE. The BUG() is triggered when retrying get_any_page(). This is because we keep MF_COUNT_INCREASED flag in second try but the refcnt is not increased. page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:737! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 5 PID: 2135 Comm: sshd Tainted: G B 5.16.0-rc6-dirty #373 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: release_pages+0x53f/0x840 Call Trace: free_pages_and_swap_cache+0x64/0x80 tlb_flush_mmu+0x6f/0x220 unmap_page_range+0xe6c/0x12c0 unmap_single_vma+0x90/0x170 unmap_vmas+0xc4/0x180 exit_mmap+0xde/0x3a0 mmput+0xa3/0x250 do_exit+0x564/0x1470 do_group_exit+0x3b/0x100 __do_sys_exit_group+0x13/0x20 __x64_sys_exit_group+0x16/0x20 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: ---[ end trace e99579b570fe0649 ]--- RIP: 0010:release_pages+0x53f/0x840 Link: https://lkml.kernel.org/r/20211221074908.3910286-1-liushixin2@huawei.com Fixes: b94e02822deb ("mm,hwpoison: try to narrow window race for free pages") Signed-off-by: Liu Shixin <liushixin2(a)huawei.com> Reported-by: Hulk Robot <hulkci(a)huawei.com> Reviewed-by: Oscar Salvador <osalvador(a)suse.de> Acked-by: Naoya Horiguchi <naoya.horiguchi(a)nec.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Ma Wupeng <mawupeng1(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- mm/memory-failure.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 578859c94866f..c743ad409908c 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1955,6 +1955,7 @@ int soft_offline_page(struct page *page, int flags) else if (ret == 0) if (soft_offline_free_page(page) && try_again) { try_again = false; + flags &= ~MF_COUNT_INCREASED; goto retry; } -- 2.25.1

1 0

[ANNOUNCE] 新建 openEuler-22.03-LTS 维护分支
by Xie XiuQi 25 Feb '22

25 Feb '22

各位好, openEuler 22.03 LTS 已经发布了第二轮测试版本，为支撑版本发布和维护，我们基于 OLK-5.10 创建了 openEuler-22.03-LTS 分支。该分支用于 22.03-LTS 版本的维护，不再接受未事先规划的新特性。仅接受 bugfix、CVE 和性能优化。如有补丁需要合入该分支，需在补丁标题增加版本分支前缀。 - 需要推送到该分支的补丁，需要首先合入 OLK-5.10；该分支原则上不接受没有合入 OLK-5.10 的补丁。 - 22.03-LTS 发布之后，可以接受从 OLK-5.10 backport 的不影响兼容性的优化、硬件使能等影响小的特性。同时基于 OLK-5.10 创建 openEuler-22.09 分支，用于支撑 22.09 创新版本的开发。创新版本接受新特性、Preview 特性、验证特性等，促进新技术、新特性的成熟和稳定。 OLK-5.10 分支继续接受补丁合入请求。新创建的分支路径： https://gitee.com/openeuler/kernel/tree/openEuler-22.03-LTS/ https://gitee.com/openeuler/kernel/tree/openEuler-22.09/

1 0

[PATCH OLK-5.10] configs: enable CONFIG_INTEL_IDXD
by fuyufan 24 Feb '22

24 Feb '22

euler inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4URME CVE: NA -------------------------------- Enable CONFIG_INTEL_IDXD in openeuler_defconfig for x86. Support Intel Data Accelerators on Xeon hardware. Signed-off-by: fuyufan <fuyufan(a)huawei.com> --- arch/x86/configs/openeuler_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 316c4122a859..350a02583978 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -6353,7 +6353,7 @@ CONFIG_DMA_VIRTUAL_CHANNELS=y CONFIG_DMA_ACPI=y # CONFIG_ALTERA_MSGDMA is not set CONFIG_INTEL_IDMA64=m -# CONFIG_INTEL_IDXD is not set +CONFIG_INTEL_IDXD=m CONFIG_INTEL_IOATDMA=m # CONFIG_PLX_DMA is not set # CONFIG_QCOM_HIDMA_MGMT is not set -- 2.27.0

1 0

[PATCH OLK-5.10] configs: enable CONFIG_INTEL_IDXD
by fuyufan 24 Feb '22

24 Feb '22

euler inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4URME CVE: NA -------------------------------- Enable CONFIG_INTEL_IDXD in openeuler_defconfig for x86. Support Intel Data Accelerators on Xeon hardware. Signed-off-by: fuyufan <fuyufan(a)huawei.com> --- arch/x86/configs/openeuler_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 316c4122a859..350a02583978 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -6353,7 +6353,7 @@ CONFIG_DMA_VIRTUAL_CHANNELS=y CONFIG_DMA_ACPI=y # CONFIG_ALTERA_MSGDMA is not set CONFIG_INTEL_IDMA64=m -# CONFIG_INTEL_IDXD is not set +CONFIG_INTEL_IDXD=y CONFIG_INTEL_IOATDMA=m # CONFIG_PLX_DMA is not set # CONFIG_QCOM_HIDMA_MGMT is not set -- 2.27.0

1 0

[PATCH openEuler-1.0-LTS 1/2] udf: Fix NULL ptr deref when converting from inline format
by Yang Yingliang 24 Feb '22

24 Feb '22

From: Jan Kara <jack(a)suse.cz> mainline inclusion from mainline-v5.17-rc2 commit 7fc3b7c2981bbd1047916ade327beccb90994eee category: bugfix bugzilla: 186269 CVE: CVE-2022-0617 ----------------------------------------------- udf_expand_file_adinicb() calls directly ->writepage to write data expanded into a page. This however misses to setup inode for writeback properly and so we can crash on inode->i_wb dereference when submitting page for IO like: BUG: kernel NULL pointer dereference, address: 0000000000000158 #PF: supervisor read access in kernel mode ... <TASK> __folio_start_writeback+0x2ac/0x350 __block_write_full_page+0x37d/0x490 udf_expand_file_adinicb+0x255/0x400 [udf] udf_file_write_iter+0xbe/0x1b0 [udf] new_sync_write+0x125/0x1c0 vfs_write+0x28e/0x400 Fix the problem by marking the page dirty and going through the standard writeback path to write the page. Strictly speaking we would not even have to write the page but we want to catch e.g. ENOSPC errors early. Reported-by: butt3rflyh4ck <butterflyhuangxx(a)gmail.com> CC: stable(a)vger.kernel.org Fixes: 52ebea749aae ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks") Reviewed-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Jan Kara <jack(a)suse.cz> Signed-off-by: Zhang Wensheng <zhangwensheng5(a)huawei.com> Reviewed-by: Zhang Yi <yi.zhang(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/udf/inode.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/fs/udf/inode.c b/fs/udf/inode.c index 4c46ebf0e773b..d1fab052ac759 100644 --- a/fs/udf/inode.c +++ b/fs/udf/inode.c @@ -248,10 +248,6 @@ int udf_expand_file_adinicb(struct inode *inode) char *kaddr; struct udf_inode_info *iinfo = UDF_I(inode); int err; - struct writeback_control udf_wbc = { - .sync_mode = WB_SYNC_NONE, - .nr_to_write = 1, - }; WARN_ON_ONCE(!inode_is_locked(inode)); if (!iinfo->i_lenAlloc) { @@ -295,8 +291,10 @@ int udf_expand_file_adinicb(struct inode *inode) iinfo->i_alloc_type = ICBTAG_FLAG_AD_LONG; /* from now on we have normal address_space methods */ inode->i_data.a_ops = &udf_aops; + set_page_dirty(page); + unlock_page(page); up_write(&iinfo->i_data_sem); - err = inode->i_data.a_ops->writepage(page, &udf_wbc); + err = filemap_fdatawrite(inode->i_mapping); if (err) { /* Restore everything back so that we don't lose data... */ lock_page(page); -- 2.25.1

1 1

[PATCH openEuler-5.10 01/18] efi: Make efi_print_memmap() public
by Zheng Zengkai 23 Feb '22

23 Feb '22

From: Ma Wupeng <mawupeng1(a)huawei.com> hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4PM01 CVE: NA -------------------------------- Make efi_print_memmap() public in preparation for adding fake memory support for architecture with efi support, eg, arm64. Co-developed-by: Jing Xiangfeng <jingxiangfeng(a)huawei.com> Signed-off-by: Ma Wupeng <mawupeng1(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> --- arch/x86/include/asm/efi.h | 1 - arch/x86/platform/efi/efi.c | 16 ---------------- drivers/firmware/efi/memmap.c | 16 ++++++++++++++++ include/linux/efi.h | 1 + 4 files changed, 17 insertions(+), 17 deletions(-) diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index bc9758ef292e..3be8754408d5 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -138,7 +138,6 @@ struct efi_scratch { extern struct efi_scratch efi_scratch; extern int __init efi_memblock_x86_reserve_range(void); -extern void __init efi_print_memmap(void); extern void __init efi_map_region(efi_memory_desc_t *md); extern void __init efi_map_region_fixed(efi_memory_desc_t *md); extern void efi_sync_low_kernel_mappings(void); diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 8a26e705cb06..ef6f4cbffe28 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -323,22 +323,6 @@ static void __init efi_clean_memmap(void) } } -void __init efi_print_memmap(void) -{ - efi_memory_desc_t *md; - int i = 0; - - for_each_efi_memory_desc(md) { - char buf[64]; - - pr_info("mem%02u: %s range=[0x%016llx-0x%016llx] (%lluMB)\n", - i++, efi_md_typeattr_format(buf, sizeof(buf), md), - md->phys_addr, - md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1, - (md->num_pages >> (20 - EFI_PAGE_SHIFT))); - } -} - static int __init efi_systab_init(unsigned long phys) { int size = efi_enabled(EFI_64BIT) ? sizeof(efi_system_table_64_t) diff --git a/drivers/firmware/efi/memmap.c b/drivers/firmware/efi/memmap.c index 2ff1883dc788..0155bf066ba5 100644 --- a/drivers/firmware/efi/memmap.c +++ b/drivers/firmware/efi/memmap.c @@ -376,3 +376,19 @@ void __init efi_memmap_insert(struct efi_memory_map *old_memmap, void *buf, } } } + +void __init efi_print_memmap(void) +{ + efi_memory_desc_t *md; + int i = 0; + + for_each_efi_memory_desc(md) { + char buf[64]; + + pr_info("mem%02u: %s range=[0x%016llx-0x%016llx] (%lluMB)\n", + i++, efi_md_typeattr_format(buf, sizeof(buf), md), + md->phys_addr, + md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1, + (md->num_pages >> (20 - EFI_PAGE_SHIFT))); + } +} diff --git a/include/linux/efi.h b/include/linux/efi.h index e17cd4c44f93..280f36cb7c14 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -643,6 +643,7 @@ extern int __init efi_memmap_split_count(efi_memory_desc_t *md, struct range *range); extern void __init efi_memmap_insert(struct efi_memory_map *old_memmap, void *buf, struct efi_mem_range *mem); +extern void __init efi_print_memmap(void); #ifdef CONFIG_EFI_ESRT extern void __init efi_esrt_init(void); -- 2.20.1

1 17

[PATCH openEuler-5.10 04/25] ahci: Fix some bugs like plugin support and sata link stability when user enable ahci RTD3
by Zheng Zengkai 23 Feb '22

23 Feb '22

From: LeoLiu-oc <LeoLiu-oc(a)zhaoxin.com> zhaoxin inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I40QDN CVE: NA ---------------------------------------------------------------- The kernel driver now will disable interrupt when port is suspended, causing plugin not work. It is useful to make plugin work，when the plugin interrupt is enabled with power management status. Adding pm_request_resume() is to reume port for plugin or PME signal waking up controller which in D3. with the AHCI controller frequently enters into D3 and leaves from D3, the identify cmd may be timeout when controller resumes and establishes a connect with the device.it is effective to delay 10ms between controller resume and port resume，with link’s smooth transition. with non power management request and power management competing with each other in queue, it is often found that block IO hang 120s when system disk is suspending or resuming.it is now guaranteed that PM requests will enter the queue no matter other non-PM requests are waiting. Increase the pm_only counter before checking whether any non-PM blk_queue_enter() calls are in progress. Meanwhile, the new blk_pm_request_resume() call is necessary to occur during request assigned to a queue when device is suspended. Signed-off-by: LeoLiu-oc <LeoLiu-oc(a)zhaoxin.com> Reviewed-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> --- drivers/ata/ahci.c | 13 +++++++++++++ drivers/ata/libahci.c | 15 +++++++++++++++ 2 files changed, 28 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index ff2add0101fe..8a7140ee88b5 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -869,6 +869,19 @@ static int ahci_pci_device_runtime_resume(struct device *dev) if (rc) return rc; ahci_pci_init_controller(host); + + /* Port resume for Zhaoxin platform */ + if (pdev->vendor == PCI_VENDOR_ID_ZHAOXIN) { + if (pdev->revision == 0x01) + ata_msleep(NULL, 10); + + for (rc = 0; rc < host->n_ports; rc++) { + struct ata_port *ap = host->ports[rc]; + + pm_request_resume(&ap->tdev); + } + } + return 0; } diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index fec2e9754aed..4514f3f28b7c 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -823,9 +823,15 @@ static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, static void ahci_power_down(struct ata_port *ap) { struct ahci_host_priv *hpriv = ap->host->private_data; + struct pci_dev *pdev; void __iomem *port_mmio = ahci_port_base(ap); u32 cmd, scontrol; + /* port suspended enable Plugin intr for Zhaoxin platform */ + pdev = (ap->dev && dev_is_pci(ap->dev)) ? to_pci_dev(ap->dev) : NULL; + if ((pdev && pdev->vendor == PCI_VENDOR_ID_ZHAOXIN) && !ap->link.device->sdev) + writel(PORT_IRQ_CONNECT, port_mmio + PORT_IRQ_MASK); + if (!(hpriv->cap & HOST_CAP_SSS)) return; @@ -1701,6 +1707,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) struct ata_link *link = NULL; struct ata_queued_cmd *active_qc; struct ata_eh_info *active_ehi; + struct pci_dev *pdev; bool fbs_need_dec = false; u32 serror; @@ -1791,6 +1798,14 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) ata_ehi_push_desc(host_ehi, "%s", irq_stat & PORT_IRQ_CONNECT ? "connection status changed" : "PHY RDY changed"); + + /* When plugin intr happen, now resume suspended port for Zhaoxin platform */ + pdev = (ap->dev && dev_is_pci(ap->dev)) ? to_pci_dev(ap->dev) : NULL; + if ((pdev && pdev->vendor == PCI_VENDOR_ID_ZHAOXIN) && + (ap->pflags & ATA_PFLAG_SUSPENDED)) { + pm_request_resume(&ap->tdev); + return; + } } /* okay, let's hand over to EH */ -- 2.20.1

1 3

[PATCH openEuler-5.10 01/25] rtc: Fix set RTC time delay 500ms on some Zhaoxin SOCs
by Zheng Zengkai 23 Feb '22

23 Feb '22

From: LeoLiu-oc <LeoLiu-oc(a)zhaoxin.com> zhaoxin inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I40QDN CVE: NA ---------------------------------------------------------------- When the RTC divider is changed from reset to an operating time base, the first update cycle should be 500ms later. But on some Zhaoxin SOCs, this first update cycle is one second later. So set RTC time on these Zhaoxin SOCs will causing 500ms delay. Skip setup RTC divider on these SOCs in mc146818_set_time to fix it. Signed-off-by: LeoLiu-oc <LeoLiu-oc(a)zhaoxin.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> Reviewed-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> --- drivers/rtc/rtc-mc146818-lib.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/drivers/rtc/rtc-mc146818-lib.c b/drivers/rtc/rtc-mc146818-lib.c index 2ecd8752b088..033dcc0645a5 100644 --- a/drivers/rtc/rtc-mc146818-lib.c +++ b/drivers/rtc/rtc-mc146818-lib.c @@ -8,6 +8,22 @@ #include <linux/acpi.h> #endif +#ifdef CONFIG_X86 +static inline bool follow_mc146818_divider_reset(void) +{ + if ((boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR || + boot_cpu_data.x86_vendor == X86_VENDOR_ZHAOXIN) && + (boot_cpu_data.x86 <= 7 && boot_cpu_data.x86_model <= 59)) + return false; + return true; +} +#else +static inline bool follow_mc146818_divider_reset(void) +{ + return true; +} +#endif + /* * Returns true if a clock update is in progress */ @@ -171,8 +187,11 @@ int mc146818_set_time(struct rtc_time *time) save_control = CMOS_READ(RTC_CONTROL); CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); - save_freq_select = CMOS_READ(RTC_FREQ_SELECT); - CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); + if (follow_mc146818_divider_reset()) { + save_freq_select = CMOS_READ(RTC_FREQ_SELECT); + CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); + } + #ifdef CONFIG_MACH_DECSTATION CMOS_WRITE(real_yrs, RTC_DEC_YEAR); @@ -190,7 +209,8 @@ int mc146818_set_time(struct rtc_time *time) #endif CMOS_WRITE(save_control, RTC_CONTROL); - CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + if (follow_mc146818_divider_reset()) + CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); spin_unlock_irqrestore(&rtc_lock, flags); -- 2.20.1

1 24

[PATCH openEuler-1.0-LTS] ext4: fix underflow in ext4_max_bitmap_size()
by Yang Yingliang 23 Feb '22

23 Feb '22

From: Zhang Yi <yi.zhang(a)huawei.com> hulk inclusion category: bugfix bugzilla: 186216, https://gitee.com/openeuler/kernel/issues/I4PW7R CVE: NA -------------------------------- The same to commit 1c2d14212b15 ("ext2: Fix underflow in ext2_max_size()") in ext2 filesystem, ext4 driver has the same issue with 64K block size and ^huge_file, fix this issue the same as ext2. This patch also revert commit 75ca6ad408f4 ("ext4: fix loff_t overflow in ext4_max_bitmap_size()") because it's no longer needed. Signed-off-by: Zhang Yi <yi.zhang(a)huawei.com> Conflicts: fs/ext4/super.c Signed-off-by: Baokun Li <libaokun1(a)huawei.com> Reviewed-by: Yang Erkun <yangerkun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/ext4/super.c | 46 +++++++++++++++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 15 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 59637e70f9e32..8f9d60ec607ea 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2958,9 +2958,10 @@ static loff_t ext4_max_size(int blkbits, int has_huge_files) */ static loff_t ext4_max_bitmap_size(int bits, int has_huge_files) { - loff_t res = EXT4_NDIR_BLOCKS; + loff_t upper_limit, res = EXT4_NDIR_BLOCKS; int meta_blocks; - loff_t upper_limit; + unsigned int ppb = 1 << (bits - 2); + /* This is calculated to be the largest file size for a dense, block * mapped file such that the file's total number of 512-byte sectors, * including data and all indirect blocks, does not exceed (2^48 - 1). @@ -2991,23 +2992,38 @@ static loff_t ext4_max_bitmap_size(int bits, int has_huge_files) } - /* indirect blocks */ - meta_blocks = 1; - /* double indirect blocks */ - meta_blocks += 1 + (1LL << (bits-2)); - /* tripple indirect blocks */ - meta_blocks += 1 + (1LL << (bits-2)) + (1LL << (2*(bits-2))); - - upper_limit -= meta_blocks; - upper_limit <<= bits; - + /* Compute how many blocks we can address by block tree */ res += 1LL << (bits-2); res += 1LL << (2*(bits-2)); res += 1LL << (3*(bits-2)); + /* Compute how many metadata blocks are needed */ + meta_blocks = 1; + meta_blocks += 1 + ppb; + meta_blocks += 1 + ppb + ppb * ppb; + /* Does block tree limit file size? */ + if (res + meta_blocks <= upper_limit) + goto check_lfs; + + res = upper_limit; + /* How many metadata blocks are needed for addressing upper_limit? */ + upper_limit -= EXT4_NDIR_BLOCKS; + /* indirect blocks */ + meta_blocks = 1; + upper_limit -= ppb; + /* double indirect blocks */ + if (upper_limit < ppb * ppb) { + meta_blocks += 1 + DIV_ROUND_UP(upper_limit, ppb); + res -= meta_blocks; + goto check_lfs; + } + meta_blocks += 1 + ppb; + upper_limit -= ppb * ppb; + /* tripple indirect blocks for the rest */ + meta_blocks += 1 + DIV_ROUND_UP(upper_limit, ppb) + + DIV_ROUND_UP(upper_limit, ppb*ppb); + res -= meta_blocks; +check_lfs: res <<= bits; - if (res > upper_limit) - res = upper_limit; - if (res > MAX_LFS_FILESIZE) res = MAX_LFS_FILESIZE; -- 2.25.1

1 0

[PATCH OLK-5.10 v4 0/7] Backport zhaoxin enhancement and bugfix
by Zheng Zengkai 23 Feb '22

23 Feb '22

v3->v4: Refector 0001 patch. v2->v3: Fix compile warning "ahci_error_intr ISO C90 forbids mixed declarations and code" Backport zhaoxin enhancement and bugfix patches. LeoLiu-oc (7): rtc: Fix set RTC time delay 500ms on some Zhaoxin SOCs XHCI:Fix some device identify fail when enable xHCI runtime suspend EHCI:Clear wakeup signal locked in S0 state when device plug in Fix some bugs like plugin support and sata link stability when user enable ahci RTD3 Add support for disabling PhyRdy Change Interrupt based on actual LPM capability Add support for PxSCT.LPM set based on actual LPM capability x86/tsc: Make cur->adjusted values in package#1 to be the same arch/x86/kernel/tsc_sync.c | 5 +++++ drivers/ata/ahci.c | 24 ++++++++++++++++++++++++ drivers/ata/libahci.c | 15 +++++++++++++++ drivers/ata/libata-eh.c | 7 +++++++ drivers/ata/libata-sata.c | 20 ++++++++++++++++++-- drivers/pci/pci-driver.c | 6 +++++- drivers/rtc/rtc-mc146818-lib.c | 28 +++++++++++++++++++++++++--- drivers/usb/host/ehci-hcd.c | 21 +++++++++++++++++++++ drivers/usb/host/ehci-pci.c | 4 ++++ drivers/usb/host/ehci.h | 1 + drivers/usb/host/xhci-pci.c | 2 ++ include/linux/libata.h | 4 ++++ 12 files changed, 131 insertions(+), 6 deletions(-) -- 2.20.1

2 9