October 2023 - Kernel - mailweb.openeuler.org

[PATCH openEuler-1.0-LTS 0/6] Fix netfilter conntrack
by Lu Wei 27 Oct '23

27 Oct '23

Florian Westphal (6): netfilter: conntrack: tell compiler to not inline nf_ct_resolve_clash netfilter: conntrack: remove two args from resolve_clash netfilter: conntrack: place confirm-bit setting in a helper netfilter: conntrack: split resolve_clash function netfilter: conntrack: allow insertion of clashing entries netfilter: conntrack: do not auto-delete clash entries on reply include/linux/rculist_nulls.h | 7 + .../linux/netfilter/nf_conntrack_common.h | 12 +- net/netfilter/nf_conntrack_core.c | 202 +++++++++++++++--- net/netfilter/nf_conntrack_proto_udp.c | 7 +- net/netfilter/nft_flow_offload.c | 2 +- 5 files changed, 193 insertions(+), 37 deletions(-) -- 2.34.1

2 7

[PATCH OLK-5.10 v3 0/7] coresight: etm4x: Migrate ACPI AMBA devices to platform driver
by Junhao He 27 Oct '23

27 Oct '23

CoreSight ETM4x devices could be accessed either via MMIO (handled via amba_driver) or CPU system instructions (handled via platform driver). But this has the following issues : - Each new CPU comes up with its own PID and thus we need to keep on adding the "known" PIDs to get it working with AMBA driver. While the ETM4 architecture (and CoreSight architecture) defines way to identify a device as ETM4. Thus older kernels won't be able to "discover" a newer CPU, unless we add the PIDs. - With ACPI, the ETM4x devices have the same HID to identify the device irrespective of the mode of access. This creates a problem where two different drivers (both AMBA based driver and platform driver) would hook into the "HID" and could conflict. e.g., if AMBA driver gets hold of a non-MMIO device, the probe fails. If we have single driver hooked into the given "HID", we could handle them seamlessly, irrespective of the mode of access. - CoreSight is heavily dependent on the runtime power management. With ACPI, amba_driver doesn't get us anywhere with handling the power and thus one need to always turn the power ON to use them. Moving to platform driver gives us the power management for free. Due to all of the above, we are moving ACPI MMIO based etm4x devices to be supported via tha platform driver. The series makes the existing platform driver generic to handle both type of the access modes. Although existing AMBA driver would still continue to support DT based etm4x MMIO devices. Although some problems still remain, such as manually adding PIDs for all new AMBA DT based devices. Anshuman Khandual (4): coresight: etm4x: Allocate and device assign 'struct etmv4_drvdata' earlier coresight: etm4x: Drop iomem 'base' argument from etm4_probe() coresight: etm4x: Drop pid argument from etm4_probe() coresight: etm4x: Change etm4_platform_driver driver for MMIO devices Junhao He (1): Revert "coresight: ete: Add acpi match id for Hip09" Suzuki K Poulose (2): coresight: platform: acpi: Ignore the absence of graph coresight: etm4x: Add ACPI support in platform driver drivers/acpi/acpi_amba.c | 1 - .../coresight/coresight-etm4x-core.c | 119 ++++++++++++++---- drivers/hwtracing/coresight/coresight-etm4x.h | 4 + .../hwtracing/coresight/coresight-platform.c | 6 +- include/linux/coresight.h | 59 +++++++++ 5 files changed, 162 insertions(+), 27 deletions(-) -- 2.33.0

2 8

[PATCH OLK-5.10] preempt/dynamic: Fix setup_preempt_mode() return value
by Xia Fukun 27 Oct '23

27 Oct '23

From: Andrew Halaney <ahalaney(a)redhat.com> mainline inclusion from mainline-v6.5-rc7 commit 9ed20bafc85806ca6c97c9128cec46c3ef80ae86 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8BAX7 CVE: NA -------------------------------- __setup() callbacks expect 1 for success and 0 for failure. Correct the usage here to reflect that. Fixes: 826bfeb37bb4 ("preempt/dynamic: Support dynamic preempt with preempt= boot option") Reported-by: Mark Rutland <mark.rutland(a)arm.com> Signed-off-by: Andrew Halaney <ahalaney(a)redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Link: https://lkml.kernel.org/r/20211203233203.133581-1-ahalaney@redhat.com Signed-off-by: Xia Fukun <xiafukun(a)huawei.com> --- kernel/sched/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 5d17bffffaf4..44cfb82b4f13 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5794,11 +5794,11 @@ static int __init setup_preempt_mode(char *str) int mode = sched_dynamic_mode(str); if (mode < 0) { pr_warn("Dynamic Preempt: unsupported mode: %s\n", str); - return 1; + return 0; } sched_dynamic_update(mode); - return 0; + return 1; } __setup("preempt=", setup_preempt_mode); -- 2.34.1

2 1

[PATCH openEuler-1.0-LTS 0/2] CVE-2022-44033
by Zhang Xiaoxu 27 Oct '23

27 Oct '23

Jiri Slaby (2): tty: ipwireless: move Kconfig entry to tty char: pcmcia: remove all the drivers Documentation/ioctl/ioctl-number.txt | 1 - Documentation/process/magic-number.rst | 1 - .../translations/zh_CN/magic-number.txt | 1 - MAINTAINERS | 17 - arch/powerpc/configs/ppc6xx_defconfig | 2 - drivers/char/Kconfig | 2 - drivers/char/Makefile | 1 - drivers/char/pcmcia/Kconfig | 67 - drivers/char/pcmcia/Makefile | 10 - drivers/char/pcmcia/cm4000_cs.c | 1920 -------- drivers/char/pcmcia/cm4040_cs.c | 685 --- drivers/char/pcmcia/cm4040_cs.h | 48 - drivers/char/pcmcia/scr24x_cs.c | 373 -- drivers/char/pcmcia/synclink_cs.c | 4305 ----------------- drivers/tty/Kconfig | 9 + include/linux/cm4000_cs.h | 11 - include/uapi/linux/cm4000_cs.h | 64 - 17 files changed, 9 insertions(+), 7508 deletions(-) delete mode 100644 drivers/char/pcmcia/Kconfig delete mode 100644 drivers/char/pcmcia/Makefile delete mode 100644 drivers/char/pcmcia/cm4000_cs.c delete mode 100644 drivers/char/pcmcia/cm4040_cs.c delete mode 100644 drivers/char/pcmcia/cm4040_cs.h delete mode 100644 drivers/char/pcmcia/scr24x_cs.c delete mode 100644 drivers/char/pcmcia/synclink_cs.c delete mode 100644 include/linux/cm4000_cs.h delete mode 100644 include/uapi/linux/cm4000_cs.h -- 2.34.1

2 3

[PATCH openEuler-22.03-LTS 0/2] CVE-2022-44033
by Zhang Xiaoxu 27 Oct '23

27 Oct '23

Jiri Slaby (2): tty: ipwireless: move Kconfig entry to tty char: pcmcia: remove all the drivers Documentation/process/magic-number.rst | 1 - .../it_IT/process/magic-number.rst | 1 - .../zh_CN/process/magic-number.rst | 1 - .../userspace-api/ioctl/ioctl-number.rst | 1 - MAINTAINERS | 17 - arch/powerpc/configs/ppc6xx_defconfig | 2 - drivers/char/Kconfig | 2 - drivers/char/Makefile | 1 - drivers/char/pcmcia/Kconfig | 68 - drivers/char/pcmcia/Makefile | 11 - drivers/char/pcmcia/cm4000_cs.c | 1912 -------- drivers/char/pcmcia/cm4040_cs.c | 685 --- drivers/char/pcmcia/cm4040_cs.h | 48 - drivers/char/pcmcia/scr24x_cs.c | 360 -- drivers/char/pcmcia/synclink_cs.c | 4304 ----------------- drivers/tty/Kconfig | 9 + include/linux/cm4000_cs.h | 11 - include/uapi/linux/cm4000_cs.h | 64 - 18 files changed, 9 insertions(+), 7489 deletions(-) delete mode 100644 drivers/char/pcmcia/Kconfig delete mode 100644 drivers/char/pcmcia/Makefile delete mode 100644 drivers/char/pcmcia/cm4000_cs.c delete mode 100644 drivers/char/pcmcia/cm4040_cs.c delete mode 100644 drivers/char/pcmcia/cm4040_cs.h delete mode 100644 drivers/char/pcmcia/scr24x_cs.c delete mode 100644 drivers/char/pcmcia/synclink_cs.c delete mode 100644 include/linux/cm4000_cs.h delete mode 100644 include/uapi/linux/cm4000_cs.h -- 2.34.1

2 3

[PATCH openEuler-22.03-LTS 0/2] CVE-2022-44033
by Zhang Xiaoxu 27 Oct '23

27 Oct '23

Jiri Slaby (2): tty: ipwireless: move Kconfig entry to tty char: pcmcia: remove all the drivers Documentation/process/magic-number.rst | 1 - .../it_IT/process/magic-number.rst | 1 - .../zh_CN/process/magic-number.rst | 1 - .../userspace-api/ioctl/ioctl-number.rst | 1 - MAINTAINERS | 17 - arch/powerpc/configs/ppc6xx_defconfig | 2 - drivers/char/Kconfig | 2 - drivers/char/Makefile | 1 - drivers/char/pcmcia/Kconfig | 68 - drivers/char/pcmcia/Makefile | 11 - drivers/char/pcmcia/cm4000_cs.c | 1912 -------- drivers/char/pcmcia/cm4040_cs.c | 685 --- drivers/char/pcmcia/cm4040_cs.h | 48 - drivers/char/pcmcia/scr24x_cs.c | 360 -- drivers/char/pcmcia/synclink_cs.c | 4304 ----------------- drivers/tty/Kconfig | 9 + include/linux/cm4000_cs.h | 11 - include/uapi/linux/cm4000_cs.h | 64 - 18 files changed, 9 insertions(+), 7489 deletions(-) delete mode 100644 drivers/char/pcmcia/Kconfig delete mode 100644 drivers/char/pcmcia/Makefile delete mode 100644 drivers/char/pcmcia/cm4000_cs.c delete mode 100644 drivers/char/pcmcia/cm4040_cs.c delete mode 100644 drivers/char/pcmcia/cm4040_cs.h delete mode 100644 drivers/char/pcmcia/scr24x_cs.c delete mode 100644 drivers/char/pcmcia/synclink_cs.c delete mode 100644 include/linux/cm4000_cs.h delete mode 100644 include/uapi/linux/cm4000_cs.h -- 2.34.1

2 3

[PATCH OLK-5.10 v4 0/6] Synchronize coresight driver bugfix patches to openEuler
by Junhao He 26 Oct '23

26 Oct '23

1. Fix memory leak coresight: Fix memory leak in acpi_buffer->pointer 2. Fix TRBE bug coresight: trbe: Fix TRBE potential sleep in atomic context coresight: trbe: Allocate platform data per device coresight: trbe: Fix return value check in arm_trbe_register_coresight_cpu() 3. Fix ETR bug coresight: Fix run time warnings while reusing ETR buffer coresight: tmc-etr: Disable warnings for allocation failures Junhao He (2): coresight: Fix memory leak in acpi_buffer->pointer coresight: trbe: Fix TRBE potential sleep in atomic context Linu Cherian (1): coresight: Fix run time warnings while reusing ETR buffer Suzuki K Poulose (2): coresight: trbe: Allocate platform data per device coresight: tmc-etr: Disable warnings for allocation failures Wei Yongjun (1): coresight: trbe: Fix return value check in arm_trbe_register_coresight_cpu() .../hwtracing/coresight/coresight-platform.c | 46 ++++++++++++------- .../hwtracing/coresight/coresight-tmc-etr.c | 23 +++++----- drivers/hwtracing/coresight/coresight-trbe.c | 41 ++++++++--------- 3 files changed, 62 insertions(+), 48 deletions(-) -- 2.33.0

2 7

[PATCH OLK-5.10 0/7] coresight: etm4x: Migrate ACPI AMBA devices to platform driver
by Junhao He 26 Oct '23

26 Oct '23

CoreSight ETM4x devices could be accessed either via MMIO (handled via amba_driver) or CPU system instructions (handled via platform driver). But this has the following issues : - Each new CPU comes up with its own PID and thus we need to keep on adding the "known" PIDs to get it working with AMBA driver. While the ETM4 architecture (and CoreSight architecture) defines way to identify a device as ETM4. Thus older kernels won't be able to "discover" a newer CPU, unless we add the PIDs. - With ACPI, the ETM4x devices have the same HID to identify the device irrespective of the mode of access. This creates a problem where two different drivers (both AMBA based driver and platform driver) would hook into the "HID" and could conflict. e.g., if AMBA driver gets hold of a non-MMIO device, the probe fails. If we have single driver hooked into the given "HID", we could handle them seamlessly, irrespective of the mode of access. - CoreSight is heavily dependent on the runtime power management. With ACPI, amba_driver doesn't get us anywhere with handling the power and thus one need to always turn the power ON to use them. Moving to platform driver gives us the power management for free. Due to all of the above, we are moving ACPI MMIO based etm4x devices to be supported via tha platform driver. The series makes the existing platform driver generic to handle both type of the access modes. Although existing AMBA driver would still continue to support DT based etm4x MMIO devices. Although some problems still remain, such as manually adding PIDs for all new AMBA DT based devices. Anshuman Khandual (4): coresight: etm4x: Allocate and device assign 'struct etmv4_drvdata' earlier coresight: etm4x: Drop iomem 'base' argument from etm4_probe() coresight: etm4x: Drop pid argument from etm4_probe() coresight: etm4x: Change etm4_platform_driver driver for MMIO devices Chengchang Tang (1): RDMA/hns: Add support for RDMA VF over UBL Junhao He (1): Revert "coresight: ete: Add acpi match id for Hip09" Suzuki K Poulose (1): coresight: platform: acpi: Ignore the absence of graph -- 2.33.0

2 8

[PATCH OLK-5.10 v2 0/7] coresight: etm4x: Migrate ACPI AMBA devices to platform driver
by Junhao He 26 Oct '23

26 Oct '23

CoreSight ETM4x devices could be accessed either via MMIO (handled via amba_driver) or CPU system instructions (handled via platform driver). But this has the following issues : - Each new CPU comes up with its own PID and thus we need to keep on adding the "known" PIDs to get it working with AMBA driver. While the ETM4 architecture (and CoreSight architecture) defines way to identify a device as ETM4. Thus older kernels won't be able to "discover" a newer CPU, unless we add the PIDs. - With ACPI, the ETM4x devices have the same HID to identify the device irrespective of the mode of access. This creates a problem where two different drivers (both AMBA based driver and platform driver) would hook into the "HID" and could conflict. e.g., if AMBA driver gets hold of a non-MMIO device, the probe fails. If we have single driver hooked into the given "HID", we could handle them seamlessly, irrespective of the mode of access. - CoreSight is heavily dependent on the runtime power management. With ACPI, amba_driver doesn't get us anywhere with handling the power and thus one need to always turn the power ON to use them. Moving to platform driver gives us the power management for free. Due to all of the above, we are moving ACPI MMIO based etm4x devices to be supported via tha platform driver. The series makes the existing platform driver generic to handle both type of the access modes. Although existing AMBA driver would still continue to support DT based etm4x MMIO devices. Although some problems still remain, such as manually adding PIDs for all new AMBA DT based devices. Anshuman Khandual (4): coresight: etm4x: Allocate and device assign 'struct etmv4_drvdata' earlier coresight: etm4x: Drop iomem 'base' argument from etm4_probe() coresight: etm4x: Drop pid argument from etm4_probe() coresight: etm4x: Change etm4_platform_driver driver for MMIO devices Junhao He (1): Revert "coresight: ete: Add acpi match id for Hip09" Suzuki K Poulose (2): coresight: platform: acpi: Ignore the absence of graph coresight: etm4x: Add ACPI support in platform driver drivers/acpi/acpi_amba.c | 1 - .../coresight/coresight-etm4x-core.c | 119 ++++++++++++++---- drivers/hwtracing/coresight/coresight-etm4x.h | 4 + .../hwtracing/coresight/coresight-platform.c | 6 +- include/linux/coresight.h | 59 +++++++++ 5 files changed, 162 insertions(+), 27 deletions(-) -- 2.33.0

1 7

[PATCH openEuler-1.0-LTS 0/2] Expose SVE2 features for userspace
by Yu Liao 26 Oct '23

26 Oct '23

Andrew Murray (1): arm64: HWCAP: add support for AT_HWCAP2 Dave Martin (1): arm64: Expose SVE2 features for userspace Documentation/arm64/cpu-feature-registers.txt | 16 ++++ Documentation/arm64/elf_hwcaps.txt | 37 ++++++++- Documentation/arm64/sve.txt | 17 ++++ arch/arm64/Kconfig | 3 + arch/arm64/crypto/aes-ce-ccm-glue.c | 2 +- arch/arm64/crypto/aes-neonbs-glue.c | 2 +- arch/arm64/crypto/chacha20-neon-glue.c | 2 +- arch/arm64/crypto/ghash-ce-glue.c | 6 +- arch/arm64/crypto/sha256-glue.c | 4 +- arch/arm64/include/asm/cpufeature.h | 22 +++--- arch/arm64/include/asm/hwcap.h | 55 ++++++++++++- arch/arm64/include/asm/sysreg.h | 14 ++++ arch/arm64/include/uapi/asm/hwcap.h | 12 ++- arch/arm64/kernel/cpufeature.c | 77 +++++++++++-------- arch/arm64/kernel/cpuinfo.c | 12 ++- arch/arm64/kernel/fpsimd.c | 4 +- drivers/clocksource/arm_arch_timer.c | 8 ++ 17 files changed, 236 insertions(+), 57 deletions(-) -- 2.25.1

2 3