July 2023 - Kernel - mailweb.openeuler.org

[PATCH 4.19 00/22] linux-4.19.y inclusion part2
by Yongqiang Liu 07 Jul '23

07 Jul '23

Benedict Wong (1): xfrm: Check if_id in inbound policy/secpath match Cambda Zhu (1): tcp: Return user_mss for TCP_MAXSEG in CLOSE/LISTEN state if user_mss set Eric Dumazet (7): netlink: annotate accesses to nlk->cb_running net: annotate sk->sk_err write from do_recvmmsg() net: datagram: fix data-races in datagram_poll() vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit() af_packet: do not use READ_ONCE() in packet_bind() rfs: annotate lockless accesses to sk->sk_rxhash rfs: annotate lockless accesses to RFS sock flow table Gavrilov Ilia (1): ipv6: Fix out-of-bounds access in ipv6_find_tlv() Guillaume Nault (1): ping6: Fix send to link-local addresses with VRF. Hangyu Hua (1): net: sched: fix possible refcount leak in tc_chain_tmplt_add() Kuniyuki Iwashima (4): af_unix: Fix a data race of sk->sk_receive_queue->qlen. af_unix: Fix data races around sk->sk_shutdown. udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated(). af_packet: Fix data-races of pkt_sk(sk)->num. Nick Child (1): net: Catch invalid index in XPS mapping Nicolas Dichtel (1): ipv{4,6}/raw: fix output xfrm lookup wrt protocol Paolo Abeni (1): tcp: factor out __tcp_close() helper Pratyush Yadav (1): net: fix skb leak in __skb_tstamp_tx() Tobias Brunner (1): af_key: Reject optional tunnel/BEET mode templates in outbound policies Vladislav Efanov (1): udp6: Fix race condition in udp6_sendmsg & connect include/linux/netdevice.h | 7 +++++-- include/net/ip.h | 2 ++ include/net/sock.h | 18 +++++++++++++----- include/net/tcp.h | 1 + include/uapi/linux/in.h | 2 ++ net/8021q/vlan_dev.c | 4 ++-- net/core/datagram.c | 15 ++++++++++----- net/core/dev.c | 8 ++++++-- net/core/skbuff.c | 4 +++- net/core/sock.c | 2 +- net/ipv4/ip_sockglue.c | 12 +++++++++++- net/ipv4/raw.c | 5 ++++- net/ipv4/tcp.c | 12 +++++++++--- net/ipv4/udplite.c | 2 ++ net/ipv6/exthdrs_core.c | 2 ++ net/ipv6/ping.c | 3 ++- net/ipv6/raw.c | 3 ++- net/ipv6/udplite.c | 2 ++ net/key/af_key.c | 12 ++++++++---- net/netlink/af_netlink.c | 8 ++++---- net/packet/af_packet.c | 8 +++++--- net/packet/diag.c | 2 +- net/sched/cls_api.c | 1 + net/socket.c | 2 +- net/unix/af_unix.c | 22 +++++++++++++--------- net/xfrm/xfrm_policy.c | 11 ++++++----- 26 files changed, 118 insertions(+), 52 deletions(-) -- 2.25.1

1 22

[PATCH openEuler-23.09 v1 0/2] Add initial openeuler_defconfig
by Wei Li 07 Jul '23

07 Jul '23

Add initial openeuler_defconfig of arm64 and x86_64, inheritted from openEuler-22.03-LTS-SP2. Wei Li (2): config: arm64: Add initial openeuler_defconfig config: x86_64: Add initial openeuler_defconfig arch/arm64/configs/openeuler_defconfig | 7815 ++++++++++++++++++++ arch/x86/configs/openeuler_defconfig | 9053 ++++++++++++++++++++++++ 2 files changed, 16868 insertions(+) create mode 100644 arch/arm64/configs/openeuler_defconfig create mode 100644 arch/x86/configs/openeuler_defconfig -- 2.25.1

1 2

[PATCH 4.19 1/7] quota: avoid increasing DQST_LOOKUPS when iterating over dirty/inuse list
by Yongqiang Liu 07 Jul '23

07 Jul '23

From: Chengguang Xu <cgxu519(a)zoho.com.cn> mainline inclusion from mainline-v5.5-rc1 commit 05848db2083d4f232e84e385845dcd98d5c511b2 category: bugfix bugzilla: 188812,https://gitee.com/openeuler/kernel/issues/I7E0YR CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- It is meaningless to increase DQST_LOOKUPS number while iterating over dirty/inuse list, so just avoid it. Link: https://lore.kernel.org/r/20190926083408.4269-1-cgxu519@zoho.com.cn Signed-off-by: Chengguang Xu <cgxu519(a)zoho.com.cn> Signed-off-by: Jan Kara <jack(a)suse.cz> Signed-off-by: Baokun Li <libaokun1(a)huawei.com> Reviewed-by: Yang Erkun <yangerkun(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- fs/quota/dquot.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c index 316f49cbc032..3b02d68d9522 100644 --- a/fs/quota/dquot.c +++ b/fs/quota/dquot.c @@ -589,7 +589,6 @@ int dquot_scan_active(struct super_block *sb, /* Now we have active dquot so we can just increase use count */ atomic_inc(&dquot->dq_count); spin_unlock(&dq_list_lock); - dqstats_inc(DQST_LOOKUPS); dqput(old_dquot); old_dquot = dquot; /* @@ -644,7 +643,6 @@ int dquot_writeback_dquots(struct super_block *sb, int type) * use count */ dqgrab(dquot); spin_unlock(&dq_list_lock); - dqstats_inc(DQST_LOOKUPS); err = sb->dq_op->write_dquot(dquot); if (err) { /* -- 2.25.1

1 6

[PATCH 4.19 00/12] linux-4.19.y inclusion part1
by Yongqiang Liu 07 Jul '23

07 Jul '23

Armin Wolf (1): ACPI: EC: Fix oops when removing custom query handlers Ben Hutchings (1): lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release() Damien Le Moal (1): scsi: core: Improve scsi_vpd_inquiry() checks Dave Hansen (1): x86/mm: Avoid incomplete Global INVLPG flushes Eli Cohen (1): lib: cpu_rmap: Avoid use after free on rmap->obj array entries Josh Poimboeuf (1): sched: Fix KCSAN noinstr violation Lukas Wunner (1): PCI: pciehp: Fix AB-BA deadlock between reset_lock and device_lock Min-Hua Chen (1): arm64/mm: mark private VM_FAULT_X defines as vm_fault_t Nathan Chancellor (1): kernel/extable.c: use address-of operator on section symbols Theodore Ts'o (1): ext4: improve error recovery code paths in __ext4_remount() Tony Lindgren (1): serial: 8250: Reinit port->pm on port specific driver unbind void0red (1): ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects arch/arm64/mm/fault.c | 4 ++-- arch/x86/include/asm/intel-family.h | 5 +++++ arch/x86/mm/init.c | 25 +++++++++++++++++++++++++ drivers/acpi/acpica/dbnames.c | 3 +++ drivers/acpi/ec.c | 1 + drivers/pci/hotplug/pciehp_pci.c | 15 +++++++++++++++ drivers/scsi/scsi.c | 11 +++++++++-- drivers/tty/serial/8250/8250_core.c | 1 + fs/ext4/super.c | 14 +++++++++++--- include/linux/sched/task_stack.h | 2 +- kernel/extable.c | 3 ++- lib/cpu_rmap.c | 5 ++++- 12 files changed, 79 insertions(+), 10 deletions(-) -- 2.25.1

1 12

[PATCH 4.19 0/9] mainline bugfixes backport
by Yongqiang Liu 07 Jul '23

07 Jul '23

Christoph Hellwig (1): block: return -EBUSY when there are open partitions in blkdev_reread_part Eric Biggers (1): random: fix data race on crng_node_pool Salman Qazi (1): block: Limit number of items taken from the I/O scheduler in one go Sebastian Andrzej Siewior (1): crypto: cryptd - Protect per-CPU resource by disabling BH. Siddh Raman Pant (1): loop: Check for overflow while configuring loop Yu Kuai (2): blk-wbt: make enable_state more accurate block: don't set GD_NEED_PART_SCAN if scan partition failed Zhong Jinghua (2): Revert "loop: Check for overflow while configuring loop" loop: loop_set_status_from_info() check before assignment block/blk-mq-sched.c | 66 ++++++++++++++++++++++++++++++++++--------- block/blk-wbt.c | 7 ++++- block/blk-wbt.h | 12 ++++---- block/genhd.c | 6 ++++ block/ioctl.c | 4 +++ crypto/cryptd.c | 23 ++++++++------- drivers/block/loop.c | 10 +++---- drivers/char/random.c | 42 ++++++++++++++------------- 8 files changed, 113 insertions(+), 57 deletions(-) -- 2.25.1

1 9

[PATCH 4.19] x86/kprobes: Fix the error judgment for debug exceptions
by Yongqiang Liu 07 Jul '23

07 Jul '23

From: Li Huafei <lihuafei1(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7EU4Q CVE: NA -------------------------------- We get the following crash caused by a null pointer access: <SNIP> BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 54 PID: 2469325 Comm: ftracetest Kdump: loaded Tainted: GFS OE 5.10.0+ #12 Hardware name: Huawei RH2288H V3/BC11HGSA0, BIOS 3.35 10/20/2016 RIP: 0010:resume_execution+0x35/0x190 Code: 41 54 55 48 89 fd 53 48 89 f3 48 83 ec 08 4c 8b 6f 60 4c 8b b6 98 00 00 00 48 89 14 24 4c 8b 67 28 4d 89 ef eb 04 49 83 c5 01 <41> 0f b6 7d 00 e8 f1 12 57 00 83 e0 0f 8d 48 ff 83 f9 0a 76 e7 83 RSP: 0018:fffffe16118acec0 EFLAGS: 00010086 RAX: 0000000000000000 RBX: fffffe16118acf58 RCX: 00000000eefdca76 RDX: ffff8f8cffd1f400 RSI: fffffe16118acf58 RDI: ffff8f5500d3c000 RBP: ffff8f5500d3c000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff970e39c0 R13: 0000000000000000 R14: ffffb55ba0bd7c60 R15: 0000000000000000 FS: 00002aaaaad22740(0000) GS:ffff8f8cffd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000003ac202c003 CR4: 00000000003706e0 DR0: ffffffff98000160 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <#DB> kprobe_debug_handler+0x41/0xd0 exc_debug+0xe5/0x1b0 asm_exc_debug+0x19/0x30 RIP: 0010:copy_from_kernel_nofault.part.0+0x55/0xc0 Code: 85 c0 74 e1 65 48 8b 04 25 40 f0 01 00 83 a8 78 14 00 00 01 48 c7 c0 f2 ff ff ff c3 cc cc cc cc 48 83 fa 03 76 16 31 c0 8b 0e <89> 0f 85 c0 75 d4 48 83 c7 04 48 83 c6 04 48 83 ea 04 48 83 fa 01 RSP: 0018:ffffb55ba0bd7c60 EFLAGS: 00000246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000076207325 RDX: 0000000000000004 RSI: ffffffff98000160 RDI: ffff8f5500c0902c RBP: ffff8f5500c0902c R08: ffffb55ba0bd7bdc R09: 0000000000000001 R10: ffff8f5548a0faf8 R11: 0000000000000000 R12: ffffffff98000160 R13: 0000000000000000 R14: ffff8f560da128c0 R15: 0000000000000000 </#DB> process_fetch_insn+0xfb/0x720 kprobe_trace_func+0x199/0x2c0 ? kernel_clone+0x5/0x2f0 kprobe_dispatcher+0x3d/0x60 aggr_pre_handler+0x40/0x80 ? kernel_clone+0x1/0x2f0 kprobe_ftrace_handler+0x82/0xf0 ? __se_sys_clone+0x65/0x90 ftrace_ops_assist_func+0x86/0x110 ? rcu_nocb_try_bypass+0x1f3/0x370 0xffffffffc07e60c8 ? kernel_clone+0x1/0x2f0 kernel_clone+0x5/0x2f0 <SNIP> The analysis reveals that kprobe and hardware breakpoints conflict in the use of debug exceptions. If we set a hardware breakpoint on a memory address, and at the same time there is a kprobe event that also goes to get the memory of that address, then when kprobe triggers, it will go to read the memory and trigger hardware breakpoint monitoring, at this time, because kprobe handles debug exceptions earlier than hardware breakpoints, it will cause kprobe to incorrectly consider this exception as a kprobe trigger. kprobe will change the status from KPROBE_HIT_ACTIVE to KPROBE_HIT_SS or KPROBE_HIT_SSDONE before single-step execution, so if the current status is KPROBE_HIT_ACTIVE, its not a debug exception triggered by kprobe. Signed-off-by: Li Huafei <lihuafei1(a)huawei.com> Reviewed-by: Ye Weihua <yeweihua4(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- arch/x86/kernel/kprobes/core.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c index d04f670f5262..7a40251a2061 100644 --- a/arch/x86/kernel/kprobes/core.c +++ b/arch/x86/kernel/kprobes/core.c @@ -995,7 +995,15 @@ int kprobe_debug_handler(struct pt_regs *regs) struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - if (!cur) + if (!cur || !cur->ainsn.insn) + return 0; + + /* kprobe will change the status from KPROBE_HIT_ACTIVE to + * KPROBE_HIT_SS or KPROBE_HIT_SSDONE before single-step execution, so + * if the current status is KPROBE_HIT_ACTIVE, its not a debug + * exception triggered by kprobe. + */ + if (kcb->kprobe_status == KPROBE_HIT_ACTIVE) return 0; resume_execution(cur, regs, kcb); -- 2.25.1

1 0

[PATCH OLK-5.10 v2] dm thin metadata: check fail_io before using data_sm
by Li Lingfeng 07 Jul '23

07 Jul '23

mainline inclusion from mainline-v6.4-rc8 commit cb65b282c9640c27d3129e2e04b711ce1b352838 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7FITX CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… ---------------------------------------- Must check pmd->fail_io before using pmd->data_sm since pmd->data_sm may be destroyed by other processes. P1(kworker) P2(message) do_worker process_prepared process_prepared_discard_passdown_pt2 dm_pool_dec_data_range pool_message commit dm_pool_commit_metadata ↓ // commit failed metadata_operation_failed abort_transaction dm_pool_abort_metadata __open_or_format_metadata ↓ dm_sm_disk_open ↓ // open failed // pmd->data_sm is NULL dm_sm_dec_blocks ↓ // try to access pmd->data_sm --> UAF As shown above, if dm_pool_commit_metadata() and dm_pool_abort_metadata() fail in pool_message process, kworker may trigger UAF. Fixes: be500ed721a6 ("dm space maps: improve performance with inc/dec on ranges of blocks") Cc: stable(a)vger.kernel.org Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> Signed-off-by: Mike Snitzer <snitzer(a)kernel.org> Conflicts: drivers/md/dm-thin-metadata.c Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- v1->v2: do not change default return value of dm_pool_inc_data_range and dm_pool_dec_data_range drivers/md/dm-thin-metadata.c | 36 ++++++++++++++++++++++------------- 1 file changed, 23 insertions(+), 13 deletions(-) diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c index 85e80fc17641..69401bfac76e 100644 --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -1771,13 +1771,15 @@ int dm_thin_remove_range(struct dm_thin_device *td, int dm_pool_block_is_shared(struct dm_pool_metadata *pmd, dm_block_t b, bool *result) { - int r; + int r = -EINVAL; uint32_t ref_count; down_read(&pmd->root_lock); - r = dm_sm_get_count(pmd->data_sm, b, &ref_count); - if (!r) - *result = (ref_count > 1); + if (!pmd->fail_io) { + r = dm_sm_get_count(pmd->data_sm, b, &ref_count); + if (!r) + *result = (ref_count > 1); + } up_read(&pmd->root_lock); return r; @@ -1788,10 +1790,14 @@ int dm_pool_inc_data_range(struct dm_pool_metadata *pmd, dm_block_t b, dm_block_ int r = 0; pmd_write_lock(pmd); - for (; b != e; b++) { - r = dm_sm_inc_block(pmd->data_sm, b); - if (r) - break; + if (!pmd->fail_io) { + for (; b != e; b++) { + r = dm_sm_inc_block(pmd->data_sm, b); + if (r) + break; + } + } else { + r = -EINVAL; } pmd_write_unlock(pmd); @@ -1800,13 +1806,17 @@ int dm_pool_inc_data_range(struct dm_pool_metadata *pmd, dm_block_t b, dm_block_ int dm_pool_dec_data_range(struct dm_pool_metadata *pmd, dm_block_t b, dm_block_t e) { - int r = 0; + int r = -EINVAL; pmd_write_lock(pmd); - for (; b != e; b++) { - r = dm_sm_dec_block(pmd->data_sm, b); - if (r) - break; + if (!pmd->fail_io) { + for (; b != e; b++) { + r = dm_sm_dec_block(pmd->data_sm, b); + if (r) + break; + } + } else { + r = -EINVAL; } pmd_write_unlock(pmd); -- 2.31.1

2 1

[PATCH OLK-5.10 0/4] dm: requeue IO if mapping table not yet
by Li Lingfeng 07 Jul '23

07 Jul '23

It's not proper to just abort IO when the map is not ready. So revert this and requeue IO to keep consistent with the community. And fix the deadlock introduced by the patch. v1->v2: add patch 38d11da522aa "dm: don't lock fs when the map is NULL in process of resume" Li Lingfeng (3): Revert "dm: make sure dm_table is binded before queue request" dm: don't lock fs when the map is NULL in process of resume dm: don't lock fs when the map is NULL during suspend or resume Mike Snitzer (1): dm: requeue IO if mapping table not yet available drivers/md/dm-rq.c | 6 ++---- drivers/md/dm.c | 15 +++++++-------- 2 files changed, 9 insertions(+), 12 deletions(-) -- 2.31.1

2 5

[PATCH 4.19 1/3] quota: fixup *_write_file_info() to return proper error code
by Yongqiang Liu 07 Jul '23

07 Jul '23

From: Yangtao Li <frank.li(a)vivo.com> mainline inclusion from mainline-v6.4-rc1 commit f8107c996f5419a5b964b9796d736c7b81f099a0 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7D7ZL?from=project-issue CVE: NA -------------------------------- For v1_write_file_info function, when quota_write() returns 0, it should be considered an EIO error. And for v2_write_file_info(), fix to proper error return code instead of raw number. Signed-off-by: Yangtao Li <frank.li(a)vivo.com> Signed-off-by: Jan Kara <jack(a)suse.cz> Message-Id: <20230227120216.31306-1-frank.li(a)vivo.com> Signed-off-by: Ye Bin <yebin10(a)huawei.com> Reviewed-by: Yang Erkun <yangerkun(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- fs/quota/quota_v1.c | 2 +- fs/quota/quota_v2.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/quota/quota_v1.c b/fs/quota/quota_v1.c index 7ac5298aba70..ebae72dc805a 100644 --- a/fs/quota/quota_v1.c +++ b/fs/quota/quota_v1.c @@ -205,7 +205,7 @@ static int v1_write_file_info(struct super_block *sb, int type) sizeof(struct v1_disk_dqblk), v1_dqoff(0)); if (ret == sizeof(struct v1_disk_dqblk)) ret = 0; - else if (ret > 0) + else if (ret >= 0) ret = -EIO; out: up_write(&dqopt->dqio_sem); diff --git a/fs/quota/quota_v2.c b/fs/quota/quota_v2.c index 22367b851d6b..760b947d061e 100644 --- a/fs/quota/quota_v2.c +++ b/fs/quota/quota_v2.c @@ -213,7 +213,7 @@ static int v2_write_file_info(struct super_block *sb, int type) up_write(&dqopt->dqio_sem); if (size != sizeof(struct v2_disk_dqinfo)) { quota_error(sb, "Can't write info structure"); - return -1; + return size < 0 ? size : -EIO; } return 0; } -- 2.25.1

1 2

[PATCH OLK-5.10] bpf: Fix incorrect verifier pruning due to missing register precision taints
by Pu Lehui 06 Jul '23

06 Jul '23

stable inclusion from stable-v5.10.179 commit b1281d008845ae9a4de9ef7510dcc1667557a67a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7J5UK CVE: CVE-2023-2163 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 71b547f561247897a0a14f3082730156c0533fed ] Juan Jose et al reported an issue found via fuzzing where the verifier's pruning logic prematurely marks a program path as safe. Consider the following program: 0: (b7) r6 = 1024 1: (b7) r7 = 0 2: (b7) r8 = 0 3: (b7) r9 = -2147483648 4: (97) r6 %= 1025 5: (05) goto pc+0 6: (bd) if r6 <= r9 goto pc+2 7: (97) r6 %= 1 8: (b7) r9 = 0 9: (bd) if r6 <= r9 goto pc+1 10: (b7) r6 = 0 11: (b7) r0 = 0 12: (63) *(u32 *)(r10 -4) = r0 13: (18) r4 = 0xffff888103693400 // map_ptr(ks=4,vs=48) 15: (bf) r1 = r4 16: (bf) r2 = r10 17: (07) r2 += -4 18: (85) call bpf_map_lookup_elem#1 19: (55) if r0 != 0x0 goto pc+1 20: (95) exit 21: (77) r6 >>= 10 22: (27) r6 *= 8192 23: (bf) r1 = r0 24: (0f) r0 += r6 25: (79) r3 = *(u64 *)(r0 +0) 26: (7b) *(u64 *)(r1 +0) = r3 27: (95) exit The verifier treats this as safe, leading to oob read/write access due to an incorrect verifier conclusion: func#0 @0 0: R1=ctx(off=0,imm=0) R10=fp0 0: (b7) r6 = 1024 ; R6_w=1024 1: (b7) r7 = 0 ; R7_w=0 2: (b7) r8 = 0 ; R8_w=0 3: (b7) r9 = -2147483648 ; R9_w=-2147483648 4: (97) r6 %= 1025 ; R6_w=scalar() 5: (05) goto pc+0 6: (bd) if r6 <= r9 goto pc+2 ; R6_w=scalar(umin=18446744071562067969,var_off=(0xffffffff00000000; 0xffffffff)) R9_w=-2147483648 7: (97) r6 %= 1 ; R6_w=scalar() 8: (b7) r9 = 0 ; R9=0 9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0 10: (b7) r6 = 0 ; R6_w=0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 9 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff8ad3886c2a00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 ; R0=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) 19: (55) if r0 != 0x0 goto pc+1 ; R0=0 20: (95) exit from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? 21: (77) r6 >>= 10 ; R6_w=0 22: (27) r6 *= 8192 ; R6_w=0 23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0) 24: (0f) r0 += r6 last_idx 24 first_idx 19 regs=40 stack=0 before 23: (bf) r1 = r0 regs=40 stack=0 before 22: (27) r6 *= 8192 regs=40 stack=0 before 21: (77) r6 >>= 10 regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1 parent didn't have regs=40 stack=0 marks: R0_rw=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) R6_rw=P0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? last_idx 18 first_idx 9 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff8ad3886c2a00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 regs=40 stack=0 before 10: (b7) r6 = 0 25: (79) r3 = *(u64 *)(r0 +0) ; R0_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 26: (7b) *(u64 *)(r1 +0) = r3 ; R1_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 27: (95) exit from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 11 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff8ad3886c2a00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 frame 0: propagating r6 last_idx 19 first_idx 11 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff8ad3886c2a00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_r=P0 R7=0 R8=0 R9=0 R10=fp0 last_idx 9 first_idx 9 regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar() R7_w=0 R8_w=0 R9_rw=0 R10=fp0 last_idx 8 first_idx 0 regs=40 stack=0 before 8: (b7) r9 = 0 regs=40 stack=0 before 7: (97) r6 %= 1 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=40 stack=0 before 5: (05) goto pc+0 regs=40 stack=0 before 4: (97) r6 %= 1025 regs=40 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 19: safe frame 0: propagating r6 last_idx 9 first_idx 0 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=40 stack=0 before 5: (05) goto pc+0 regs=40 stack=0 before 4: (97) r6 %= 1025 regs=40 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 from 6 to 9: safe verification time 110 usec stack depth 4 processed 36 insns (limit 1000000) max_states_per_insn 0 total_states 3 peak_states 3 mark_read 2 The verifier considers this program as safe by mistakenly pruning unsafe code paths. In the above func#0, code lines 0-10 are of interest. In line 0-3 registers r6 to r9 are initialized with known scalar values. In line 4 the register r6 is reset to an unknown scalar given the verifier does not track modulo operations. Due to this, the verifier can also not determine precisely which branches in line 6 and 9 are taken, therefore it needs to explore them both. As can be seen, the verifier starts with exploring the false/fall-through paths first. The 'from 19 to 21' path has both r6=0 and r9=0 and the pointer arithmetic on r0 += r6 is therefore considered safe. Given the arithmetic, r6 is correctly marked for precision tracking where backtracking kicks in where it walks back the current path all the way where r6 was set to 0 in the fall-through branch. Next, the pruning logics pops the path 'from 9 to 11' from the stack. Also here, the state of the registers is the same, that is, r6=0 and r9=0, so that at line 19 the path can be pruned as it is considered safe. It is interesting to note that the conditional in line 9 turned r6 into a more precise state, that is, in the fall-through path at the beginning of line 10, it is R6=scalar(umin=1), and in the branch-taken path (which is analyzed here) at the beginning of line 11, r6 turned into a known const r6=0 as r9=0 prior to that and therefore (unsigned) r6 <= 0 concludes that r6 must be 0 (**): [...] ; R6_w=scalar() 9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0 [...] from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 [...] The next path is 'from 6 to 9'. The verifier considers the old and current state equivalent, and therefore prunes the search incorrectly. Looking into the two states which are being compared by the pruning logic at line 9, the old state consists of R6_rwD=Pscalar() R9_rwD=0 R10=fp0 and the new state consists of R1=ctx(off=0,imm=0) R6_w=scalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0. While r6 had the reg->precise flag correctly set in the old state, r9 did not. Both r6'es are considered as equivalent given the old one is a superset of the current, more precise one, however, r9's actual values (0 vs 0x80000000) mismatch. Given the old r9 did not have reg->precise flag set, the verifier does not consider the register as contributing to the precision state of r6, and therefore it considered both r9 states as equivalent. However, for this specific pruned path (which is also the actual path taken at runtime), register r6 will be 0x400 and r9 0x80000000 when reaching line 21, thus oob-accessing the map. The purpose of precision tracking is to initially mark registers (including spilled ones) as imprecise to help verifier's pruning logic finding equivalent states it can then prune if they don't contribute to the program's safety aspects. For example, if registers are used for pointer arithmetic or to pass constant length to a helper, then the verifier sets reg->precise flag and backtracks the BPF program instruction sequence and chain of verifier states to ensure that the given register or stack slot including their dependencies are marked as precisely tracked scalar. This also includes any other registers and slots that contribute to a tracked state of given registers/stack slot. This backtracking relies on recorded jmp_history and is able to traverse entire chain of parent states. This process ends only when all the necessary registers/slots and their transitive dependencies are marked as precise. The backtrack_insn() is called from the current instruction up to the first instruction, and its purpose is to compute a bitmask of registers and stack slots that need precision tracking in the parent's verifier state. For example, if a current instruction is r6 = r7, then r6 needs precision after this instruction and r7 needs precision before this instruction, that is, in the parent state. Hence for the latter r7 is marked and r6 unmarked. For the class of jmp/jmp32 instructions, backtrack_insn() today only looks at call and exit instructions and for all other conditionals the masks remain as-is. However, in the given situation register r6 has a dependency on r9 (as described above in **), so also that one needs to be marked for precision tracking. In other words, if an imprecise register influences a precise one, then the imprecise register should also be marked precise. Meaning, in the parent state both dest and src register need to be tracked for precision and therefore the marking must be more conservative by setting reg->precise flag for both. The precision propagation needs to cover both for the conditional: if the src reg was marked but not the dst reg and vice versa. After the fix the program is correctly rejected: func#0 @0 0: R1=ctx(off=0,imm=0) R10=fp0 0: (b7) r6 = 1024 ; R6_w=1024 1: (b7) r7 = 0 ; R7_w=0 2: (b7) r8 = 0 ; R8_w=0 3: (b7) r9 = -2147483648 ; R9_w=-2147483648 4: (97) r6 %= 1025 ; R6_w=scalar() 5: (05) goto pc+0 6: (bd) if r6 <= r9 goto pc+2 ; R6_w=scalar(umin=18446744071562067969,var_off=(0xffffffff80000000; 0x7fffffff),u32_min=-2147483648) R9_w=-2147483648 7: (97) r6 %= 1 ; R6_w=scalar() 8: (b7) r9 = 0 ; R9=0 9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0 10: (b7) r6 = 0 ; R6_w=0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 9 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 ; R0=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) 19: (55) if r0 != 0x0 goto pc+1 ; R0=0 20: (95) exit from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? 21: (77) r6 >>= 10 ; R6_w=0 22: (27) r6 *= 8192 ; R6_w=0 23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0) 24: (0f) r0 += r6 last_idx 24 first_idx 19 regs=40 stack=0 before 23: (bf) r1 = r0 regs=40 stack=0 before 22: (27) r6 *= 8192 regs=40 stack=0 before 21: (77) r6 >>= 10 regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1 parent didn't have regs=40 stack=0 marks: R0_rw=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) R6_rw=P0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? last_idx 18 first_idx 9 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 regs=40 stack=0 before 10: (b7) r6 = 0 25: (79) r3 = *(u64 *)(r0 +0) ; R0_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 26: (7b) *(u64 *)(r1 +0) = r3 ; R1_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 27: (95) exit from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 11 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 frame 0: propagating r6 last_idx 19 first_idx 11 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_r=P0 R7=0 R8=0 R9=0 R10=fp0 last_idx 9 first_idx 9 regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1 parent didn't have regs=240 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar() R7_w=0 R8_w=0 R9_rw=P0 R10=fp0 last_idx 8 first_idx 0 regs=240 stack=0 before 8: (b7) r9 = 0 regs=40 stack=0 before 7: (97) r6 %= 1 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 19: safe from 6 to 9: R1=ctx(off=0,imm=0) R6_w=scalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0 9: (bd) if r6 <= r9 goto pc+1 last_idx 9 first_idx 0 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 last_idx 9 first_idx 0 regs=200 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 11: R6=scalar(umax=18446744071562067968) R9=-2147483648 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 11 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 ; R0_w=map_value_or_null(id=3,off=0,ks=4,vs=48,imm=0) 19: (55) if r0 != 0x0 goto pc+1 ; R0_w=0 20: (95) exit from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=scalar(umax=18446744071562067968) R7=0 R8=0 R9=-2147483648 R10=fp0 fp-8=mmmm???? 21: (77) r6 >>= 10 ; R6_w=scalar(umax=18014398507384832,var_off=(0x0; 0x3fffffffffffff)) 22: (27) r6 *= 8192 ; R6_w=scalar(smax=9223372036854767616,umax=18446744073709543424,var_off=(0x0; 0xffffffffffffe000),s32_max=2147475456,u32_max=-8192) 23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0) 24: (0f) r0 += r6 last_idx 24 first_idx 21 regs=40 stack=0 before 23: (bf) r1 = r0 regs=40 stack=0 before 22: (27) r6 *= 8192 regs=40 stack=0 before 21: (77) r6 >>= 10 parent didn't have regs=40 stack=0 marks: R0_rw=map_value(off=0,ks=4,vs=48,imm=0) R6_r=Pscalar(umax=18446744071562067968) R7=0 R8=0 R9=-2147483648 R10=fp0 fp-8=mmmm???? last_idx 19 first_idx 11 regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0 last_idx 9 first_idx 0 regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1 regs=240 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 math between map_value pointer and register with unbounded min value is not allowed verification time 886 usec stack depth 4 processed 49 insns (limit 1000000) max_states_per_insn 1 total_states 5 peak_states 5 mark_read 2 Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking") Reported-by: Juan Jose Lopez Jaimez <jjlopezjaimez(a)google.com> Reported-by: Meador Inge <meadori(a)google.com> Reported-by: Simon Scannell <simonscannell(a)google.com> Reported-by: Nenad Stojanovski <thenenadx(a)google.com> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Co-developed-by: Andrii Nakryiko <andrii(a)kernel.org> Signed-off-by: Andrii Nakryiko <andrii(a)kernel.org> Reviewed-by: John Fastabend <john.fastabend(a)gmail.com> Reviewed-by: Juan Jose Lopez Jaimez <jjlopezjaimez(a)google.com> Reviewed-by: Meador Inge <meadori(a)google.com> Reviewed-by: Simon Scannell <simonscannell(a)google.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Pu Lehui <pulehui(a)huawei.com> Reviewed-by: Xu Kuohai <xukuohai(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> --- kernel/bpf/verifier.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index c91533a54121..407f2263216d 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -1923,6 +1923,21 @@ static int backtrack_insn(struct bpf_verifier_env *env, int idx, } } else if (opcode == BPF_EXIT) { return -ENOTSUPP; + } else if (BPF_SRC(insn->code) == BPF_X) { + if (!(*reg_mask & (dreg | sreg))) + return 0; + /* dreg <cond> sreg + * Both dreg and sreg need precision before + * this insn. If only sreg was marked precise + * before it would be equally necessary to + * propagate it to dreg. + */ + *reg_mask |= (sreg | dreg); + /* else dreg <cond> K + * Only dreg still needs precision before + * this insn, so for the K-based conditional + * there is nothing new to be marked. + */ } } else if (class == BPF_LD) { if (!(*reg_mask & dreg)) -- 2.25.1

2 1