September 2023 - Kernel - mailweb.openeuler.org

启动 openEuler 2023 年度优秀项目推荐
by Huxinwei 25 Sep '23

25 Sep '23

各位社区的开发者：经 openEuler技术委员会9月20日会议讨论，现正式启动 openEuler 2023年度优秀项目的评选，请各位社区开发者和参与者推荐。当前在评选标准和项目设置上的考虑，可以参见：oEEP (openeuler.org)<https://www.openeuler.org/zh/oEEP/?name=oEEP-0007%20openEuler%E4%BC%98%E7%A…> 。截止 2023 年 10 月 15 日（周日）为止，任意三名以上社区参与者联名，可以向 tc(a)openeuler.org<mailto:tc@openeuler.org> 推荐您认可的项目。推荐项目的邮件请在邮件主题中明确包含 “openEuler 2023 年度优秀项目推荐” 字样。推荐项目的邮件内容中，请明确联名推荐人的邮箱地址和相应的 gitee id，推荐的项目名称，项目代码仓位置，推荐获奖的方向。我将汇总所有推荐，在 10 月 18 日之前通过社区邮件列表公示。欢迎大家的参与和推荐 Regards openEuler Technical Committee

1 0

[PATCH openEuler-23.09 0/4] LoongArch: Add cpufreq and BMC
by Weihao Li 25 Sep '23

25 Sep '23

Weihao Li (4): cpufreq: Add cpufreq driver for LoongArch fbdev: add ls2k500sfb driver for ls2k500 bmc. ipmi: add ls2k500 bmc ipmi support. LoongArch: defconfig: enable CONFIG_FB_LS2K500=m. arch/loongarch/Kconfig | 6 + arch/loongarch/configs/loongson3_defconfig | 5 + arch/loongarch/include/asm/fpu.h | 13 +- drivers/char/ipmi/Makefile | 4 + drivers/char/ipmi/btlock.h | 92 ++ drivers/char/ipmi/ipmi_si.h | 11 + drivers/char/ipmi/ipmi_si_intf.c | 4 + drivers/char/ipmi/ipmi_si_ls2k500.c | 172 +++ drivers/char/ipmi/kcs_bmc_ls2k500.h | 67 + drivers/cpufreq/Kconfig | 11 + drivers/cpufreq/Makefile | 1 + drivers/cpufreq/loongson3-acpi-cpufreq.c | 1549 ++++++++++++++++++++ drivers/video/fbdev/Kconfig | 9 + drivers/video/fbdev/Makefile | 1 + drivers/video/fbdev/ls2k500sfb.c | 791 ++++++++++ 15 files changed, 2735 insertions(+), 1 deletion(-) create mode 100644 drivers/char/ipmi/btlock.h create mode 100644 drivers/char/ipmi/ipmi_si_ls2k500.c create mode 100644 drivers/char/ipmi/kcs_bmc_ls2k500.h create mode 100644 drivers/cpufreq/loongson3-acpi-cpufreq.c create mode 100644 drivers/video/fbdev/ls2k500sfb.c -- 2.20.1

2 5

[PATCH openEuler-23.09 0/5] LoongArch: add rtc driver and fix
by Ming Wang 25 Sep '23

25 Sep '23

Ming Wang (5): rtc: Add rtc driver for the Loongson family chips LoongArch: kdump: Add memory reservation for old kernel LoongArch: kexec: Add compatibility with old interfaces LoongArch: Fix kdump failure on v40 interface specification LoongArch: kdump: Add high memory reservation arch/loongarch/kernel/machine_kexec.c | 45 ++- arch/loongarch/kernel/setup.c | 94 +++++- drivers/rtc/Kconfig | 13 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-loongson.c | 397 ++++++++++++++++++++++++++ 5 files changed, 535 insertions(+), 15 deletions(-) create mode 100644 drivers/rtc/rtc-loongson.c -- 2.39.2

1 5

[PATCH OLK-5.10] sdei_watchdog: Avoid exception during sdei handler
by Zheng Zengkai 23 Sep '23

23 Sep '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I82QPR -------------------------------- On Kunpeng920 platform, when firmware triggers SDEI event too soon, A WARN_ON() will be called in sdei_watchdog_callback(), this leads to warning "sdei: unsafe: exception during handler" being reported in _sdei_handler(). As the comments for the warning mentioned, We took a synchronous exception from the SDEI handler. This could deadlock, and if you interrupt KVM it will hyp-panic instead. Remove the WARN_ON() to avoid potential issue and warning. Fixes: 0fa83fd0f8f7 ("sdei_watchdog: avoid possible false hardlockup") Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> --- arch/arm64/kernel/watchdog_sdei.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/kernel/watchdog_sdei.c b/arch/arm64/kernel/watchdog_sdei.c index aa980b090598..7fd8c2d3dd1b 100644 --- a/arch/arm64/kernel/watchdog_sdei.c +++ b/arch/arm64/kernel/watchdog_sdei.c @@ -78,7 +78,6 @@ static int sdei_watchdog_callback(u32 event, if (delta < watchdog_thresh * (u64)NSEC_PER_SEC * 4 / 5) { pr_err(FW_BUG "SDEI Watchdog event triggered too soon, " "time to last check:%lld ns\n", delta); - WARN_ON(1); return 0; } -- 2.20.1

2 1

[PATCH openEuler-1.0-LTS] sdei_watchdog: Avoid exception during sdei handler
by Zheng Zengkai 23 Sep '23

23 Sep '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I82QPR -------------------------------- On Kunpeng920 platform, when firmware triggers SDEI event too soon, A WARN_ON() will be called in sdei_watchdog_callback(), this leads to warning "sdei: unsafe: exception during handler" being reported in _sdei_handler(). As the comments for the warning mentioned, We took a synchronous exception from the SDEI handler. This could deadlock, and if you interrupt KVM it will hyp-panic instead. Remove the WARN_ON() to avoid potential issue and warning. Fixes: 37433b57ffdd ("sdei_watchdog: avoid possible false hardlockup") Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> --- arch/arm64/kernel/watchdog_sdei.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/kernel/watchdog_sdei.c b/arch/arm64/kernel/watchdog_sdei.c index a499a14b23c1..5884abdaeb9d 100644 --- a/arch/arm64/kernel/watchdog_sdei.c +++ b/arch/arm64/kernel/watchdog_sdei.c @@ -78,7 +78,6 @@ static int sdei_watchdog_callback(u32 event, if (delta < watchdog_thresh * (u64)NSEC_PER_SEC * 4 / 5) { pr_err(FW_BUG "SDEI Watchdog event triggered too soon, " "time to last check:%lld ns\n", delta); - WARN_ON(1); return 0; } -- 2.20.1

2 1

[PATCH 01/88] scsi: mpt3sas: Define hba_port structure
by Hao Zhang 22 Sep '23

22 Sep '23

From: Sreekanth Reddy <sreekanth.reddy(a)broadcom.com> Commit b22a0fac8c056e88fc72f7241fa9077b804634a6 upstream. Define a new hba_port structure which holds the following variables: - port_id: Port ID of the narrow/wide port of the HBA - sas_address: SAS Address of the remote device that is attached to the current HBA port - phy_mask: HBA's phy bits to which above SAS addressed device is attached - flags: This field is used to refresh port details during HBA reset Link: https://lore.kernel.org/r/20201027130847.9962-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy(a)broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Integrated-by: Siyu Zhang <siyu.zhang(a)windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.h | 35 ++++++++++++++++++++++++++++- 1 file changed, 34 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 86774747fe25..9a3429b1e7ce 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -420,6 +420,7 @@ struct Mpi2ManufacturingPage11_t { * @flags: MPT_TARGET_FLAGS_XXX flags * @deleted: target flaged for deletion * @tm_busy: target is busy with TM request. + * @port: hba port entry containing target's port number info * @sas_dev: The sas_device associated with this target * @pcie_dev: The pcie device associated with this target */ @@ -432,6 +433,7 @@ struct MPT3SAS_TARGET { u32 flags; u8 deleted; u8 tm_busy; + struct hba_port *port; struct _sas_device *sas_dev; struct _pcie_device *pcie_dev; }; @@ -534,6 +536,7 @@ struct _internal_cmd { * addition routine. * @chassis_slot: chassis slot * @is_chassis_slot_valid: chassis slot valid or not + * @port: hba port entry containing device's port number info */ struct _sas_device { struct list_head list; @@ -560,6 +563,7 @@ struct _sas_device { u8 is_chassis_slot_valid; u8 connector_name[5]; struct kref refcount; + struct hba_port *port; }; static inline void sas_device_get(struct _sas_device *s) @@ -730,6 +734,7 @@ struct _boot_device { * @remote_identify: attached device identification * @rphy: sas transport rphy object * @port: sas transport wide/narrow port object + * @hba_port: hba port entry containing port's port number info * @phy_list: _sas_phy list objects belonging to this port */ struct _sas_port { @@ -738,6 +743,7 @@ struct _sas_port { struct sas_identify remote_identify; struct sas_rphy *rphy; struct sas_port *port; + struct hba_port *hba_port; struct list_head phy_list; }; @@ -751,6 +757,7 @@ struct _sas_port { * @handle: device handle for this phy * @attached_handle: device handle for attached device * @phy_belongs_to_port: port has been created for this phy + * @port: hba port entry containing port number info */ struct _sas_phy { struct list_head port_siblings; @@ -761,6 +768,7 @@ struct _sas_phy { u16 handle; u16 attached_handle; u8 phy_belongs_to_port; + struct hba_port *port; }; /** @@ -776,6 +784,7 @@ struct _sas_phy { * @responding: used in _scsih_expander_device_mark_responding * @phy: a list of phys that make up this sas_host/expander * @sas_port_list: list of ports attached to this sas_host/expander + * @port: hba port entry containing node's port number info */ struct _sas_node { struct list_head list; @@ -787,11 +796,11 @@ struct _sas_node { u16 enclosure_handle; u64 enclosure_logical_id; u8 responding; + struct hba_port *port; struct _sas_phy *phy; struct list_head sas_port_list; }; - /** * struct _enclosure_node - enclosure information * @list: list of enclosures @@ -1009,6 +1018,27 @@ struct reply_post_struct { dma_addr_t reply_post_free_dma; }; +/** + * struct hba_port - Saves each HBA's Wide/Narrow port info + * @sas_address: sas address of this wide/narrow port's attached device + * @phy_mask: HBA PHY's belonging to this port + * @port_id: port number + * @flags: hba port flags + */ +struct hba_port { + struct list_head list; + u64 sas_address; + u32 phy_mask; + u8 port_id; + u8 flags; +}; + +/* hba port flags */ +#define HBA_PORT_FLAG_DIRTY_PORT 0x01 +#define HBA_PORT_FLAG_NEW_PORT 0x02 + +#define MULTIPATH_DISABLED_PORT_ID 0xFF + typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); /** * struct MPT3SAS_ADAPTER - per adapter struct @@ -1191,6 +1221,7 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); * which ensures the syncrhonization between cli/sysfs_show path. * @atomic_desc_capable: Atomic Request Descriptor support. * @GET_MSIX_INDEX: Get the msix index of high iops queues. + * @port_table_list: list containing HBA's wide/narrow port's info */ struct MPT3SAS_ADAPTER { struct list_head list; @@ -1483,6 +1514,8 @@ struct MPT3SAS_ADAPTER { PUT_SMID_IO_FP_HIP put_smid_hi_priority; PUT_SMID_DEFAULT put_smid_default; GET_MSIX_INDEX get_msix_index_for_smlio; + + struct list_head port_table_list; }; struct mpt3sas_debugfs_buffer { -- 2.33.0

1 87

openEuler kernel SIG双周例会
by openEuler conference 22 Sep '23

22 Sep '23

您好！ Kernel SIG 邀请您参加 2023-09-22 14:15 召开的WeLink会议(自动录制) 会议主题：openEuler kernel SIG双周例会会议链接：https://bmeeting.huaweicloud.com:36443/#/j/984839769 会议纪要：https://etherpad.openeuler.org/p/Kernel-meetings 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler Kernel SIG invites you to attend the WeLink conference(auto recording) will be held at 2023-09-22 14:15, The subject of the conference is openEuler kernel SIG双周例会, You can join the meeting at https://bmeeting.huaweicloud.com:36443/#/j/984839769. Add topics at https://etherpad.openeuler.org/p/Kernel-meetings. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

（备用）openEuler Kernel SIG双周例会
by openEuler conference 22 Sep '23

22 Sep '23

您好！ Kernel SIG 邀请您参加 2023-09-22 14:15 召开的Zoom会议(自动录制) 会议主题：（备用）openEuler Kernel SIG双周例会会议内容： 1. 进展update 2. 议题征集中会议链接：https://us06web.zoom.us/j/83148210957?pwd=UO852Qaa2nEd3cIHULjWDmtCAmZ90O.1 会议纪要：https://etherpad.openeuler.org/p/Kernel-meetings 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler Kernel SIG invites you to attend the Zoom conference(auto recording) will be held at 2023-09-22 14:15, The subject of the conference is （备用）openEuler Kernel SIG双周例会, Summary: 1. 进展update 2. 议题征集中 You can join the meeting at https://us06web.zoom.us/j/83148210957?pwd=UO852Qaa2nEd3cIHULjWDmtCAmZ90O.1. Add topics at https://etherpad.openeuler.org/p/Kernel-meetings. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

[PATCH openEuler-1.0-LTS] cpuidle: Fix kobject memory leaks in error paths
by Xia Fukun 22 Sep '23

22 Sep '23

From: Anel Orazgaliyeva <anelkz(a)amazon.de> stable inclusion from stable-v4.19.294 commit 22d44652b6d6404b96a40bb051d1046e6c005ae5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I81G0T CVE: NA -------------------------------- [ Upstream commit e5f5a66c9aa9c331da5527c2e3fd9394e7091e01 ] Commit c343bf1ba5ef ("cpuidle: Fix three reference count leaks") fixes the cleanup of kobjects; however, it removes kfree() calls altogether, leading to memory leaks. Fix those and also defer the initialization of dev->kobj_dev until after the error check, so that we do not end up with a dangling pointer. Fixes: c343bf1ba5ef ("cpuidle: Fix three reference count leaks") Signed-off-by: Anel Orazgaliyeva <anelkz(a)amazon.de> Suggested-by: Aman Priyadarshi <apeureka(a)amazon.de> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Xia Fukun <xiafukun(a)huawei.com> --- drivers/cpuidle/sysfs.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c index 38986a36197e..76fcd45eadb5 100644 --- a/drivers/cpuidle/sysfs.c +++ b/drivers/cpuidle/sysfs.c @@ -481,6 +481,7 @@ static int cpuidle_add_state_sysfs(struct cpuidle_device *device) &kdev->kobj, "state%d", i); if (ret) { kobject_put(&kobj->kobj); + kfree(kobj); goto error_state; } cpuidle_add_s2idle_attr_group(kobj); @@ -612,6 +613,7 @@ static int cpuidle_add_driver_sysfs(struct cpuidle_device *dev) &kdev->kobj, "driver"); if (ret) { kobject_put(&kdrv->kobj); + kfree(kdrv); return ret; } @@ -698,7 +700,6 @@ int cpuidle_add_sysfs(struct cpuidle_device *dev) if (!kdev) return -ENOMEM; kdev->dev = dev; - dev->kobj_dev = kdev; init_completion(&kdev->kobj_unregister); @@ -706,9 +707,11 @@ int cpuidle_add_sysfs(struct cpuidle_device *dev) "cpuidle"); if (error) { kobject_put(&kdev->kobj); + kfree(kdev); return error; } + dev->kobj_dev = kdev; kobject_uevent(&kdev->kobj, KOBJ_ADD); return 0; -- 2.34.1

2 1

[PATCH openEuler-1.0-LTS] cec-api: prevent leaking memory through hole in structure
by Zhao Wenhui 21 Sep '23

21 Sep '23

From: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> mainline inclusion from mainline-v5.9-rc1 commit 6c42227c3467549ddc65efe99c869021d2f4a570 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I82DIP CVE: CVE-2020-36766 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- Fix this smatch warning: drivers/media/cec/core/cec-api.c:156 cec_adap_g_log_addrs() warn: check that 'log_addrs' doesn't leak information (struct has a hole after 'features') Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org> Signed-off-by: Zhao Wenhui <zhaowenhui8(a)huawei.com> --- drivers/media/cec/cec-api.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/media/cec/cec-api.c b/drivers/media/cec/cec-api.c index 4961573850d5..b2b3f779592f 100644 --- a/drivers/media/cec/cec-api.c +++ b/drivers/media/cec/cec-api.c @@ -147,7 +147,13 @@ static long cec_adap_g_log_addrs(struct cec_adapter *adap, struct cec_log_addrs log_addrs; mutex_lock(&adap->lock); - log_addrs = adap->log_addrs; + /* + * We use memcpy here instead of assignment since there is a + * hole at the end of struct cec_log_addrs that an assignment + * might ignore. So when we do copy_to_user() we could leak + * one byte of memory. + */ + memcpy(&log_addrs, &adap->log_addrs, sizeof(log_addrs)); if (!adap->is_configured) memset(log_addrs.log_addr, CEC_LOG_ADDR_INVALID, sizeof(log_addrs.log_addr)); -- 2.34.1

2 1