April 2024 - Kernel - mailweb.openeuler.org

[PATCH openEuler-1.0-LTS] fbdev: savage: Error out if pixclock equals zero
by Cai Xinchen 10 Apr '24

10 Apr '24

From: Fullway Wang <fullwaywang(a)outlook.com> stable inclusion from stable-v4.19.308 commit 224453de8505aede1890f007be973925a3edf6a1 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I9E2Y8 CVE: CVE-2024-26778 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 04e5eac8f3ab2ff52fa191c187a46d4fdbc1e288 ] The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of pixclock, it may cause divide-by-zero error. Although pixclock is checked in savagefb_decode_var(), but it is not checked properly in savagefb_probe(). Fix this by checking whether pixclock is zero in the function savagefb_check_var() before info->var.pixclock is used as the divisor. This is similar to CVE-2022-3061 in i740fb which was fixed by commit 15cf0b8. Signed-off-by: Fullway Wang <fullwaywang(a)outlook.com> Signed-off-by: Helge Deller <deller(a)gmx.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Cai Xinchen <caixinchen1(a)huawei.com> --- drivers/video/fbdev/savage/savagefb_driver.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/video/fbdev/savage/savagefb_driver.c b/drivers/video/fbdev/savage/savagefb_driver.c index c09d7426cd92..d9eafdb89cea 100644 --- a/drivers/video/fbdev/savage/savagefb_driver.c +++ b/drivers/video/fbdev/savage/savagefb_driver.c @@ -869,6 +869,9 @@ static int savagefb_check_var(struct fb_var_screeninfo *var, DBG("savagefb_check_var"); + if (!var->pixclock) + return -EINVAL; + var->transp.offset = 0; var->transp.length = 0; switch (var->bits_per_pixel) { -- 2.34.1

2 1

[PATCH] fbdev: savage: Error out if pixclock equals zero
by Cai Xinchen 10 Apr '24

10 Apr '24

From: Fullway Wang <fullwaywang(a)outlook.com> stable inclusion from stable-v4.19.308 commit 224453de8505aede1890f007be973925a3edf6a1 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I9E2Y8 CVE: CVE-2024-26778 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 04e5eac8f3ab2ff52fa191c187a46d4fdbc1e288 ] The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of pixclock, it may cause divide-by-zero error. Although pixclock is checked in savagefb_decode_var(), but it is not checked properly in savagefb_probe(). Fix this by checking whether pixclock is zero in the function savagefb_check_var() before info->var.pixclock is used as the divisor. This is similar to CVE-2022-3061 in i740fb which was fixed by commit 15cf0b8. Signed-off-by: Fullway Wang <fullwaywang(a)outlook.com> Signed-off-by: Helge Deller <deller(a)gmx.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Cai Xinchen <caixinchen1(a)huawei.com> --- drivers/video/fbdev/savage/savagefb_driver.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/video/fbdev/savage/savagefb_driver.c b/drivers/video/fbdev/savage/savagefb_driver.c index c09d7426cd92..d9eafdb89cea 100644 --- a/drivers/video/fbdev/savage/savagefb_driver.c +++ b/drivers/video/fbdev/savage/savagefb_driver.c @@ -869,6 +869,9 @@ static int savagefb_check_var(struct fb_var_screeninfo *var, DBG("savagefb_check_var"); + if (!var->pixclock) + return -EINVAL; + var->transp.offset = 0; var->transp.length = 0; switch (var->bits_per_pixel) { -- 2.34.1

1 0

[PATCH OLK-5.10 0/5] cvm feature patches
by hejingxian 10 Apr '24

10 Apr '24

From: Jingxian He <hejingxian(a)huawei.com> Add cvm feature patches: 1. add cvm host feature 2. enable pmu phys irq inject for cvm 3. add bounce buffer feature for cvm guest 4. add lpi support for cvm guest 5. fix kabi for cvm host arch/arm64/configs/defconfig | 2 + arch/arm64/configs/openeuler_defconfig | 2 + arch/arm64/include/asm/cvm_guest.h | 21 + arch/arm64/include/asm/kvm_emulate.h | 18 + arch/arm64/include/asm/kvm_host.h | 28 +- arch/arm64/include/asm/kvm_tmi.h | 377 +++++++++++ arch/arm64/include/asm/kvm_tmm.h | 73 +++ arch/arm64/kvm/Kconfig | 16 + arch/arm64/kvm/Makefile | 5 + arch/arm64/kvm/arch_timer.c | 104 ++- arch/arm64/kvm/arm.c | 157 ++++- arch/arm64/kvm/cvm.c | 869 +++++++++++++++++++++++++ arch/arm64/kvm/cvm_exit.c | 240 +++++++ arch/arm64/kvm/cvm_guest.c | 91 +++ arch/arm64/kvm/guest.c | 8 + arch/arm64/kvm/hisilicon/hisi_virt.c | 7 + arch/arm64/kvm/hyp/vgic-v3-sr.c | 19 + arch/arm64/kvm/mmio.c | 19 + arch/arm64/kvm/mmu.c | 7 + arch/arm64/kvm/pmu-emul.c | 10 + arch/arm64/kvm/psci.c | 12 +- arch/arm64/kvm/reset.c | 10 + arch/arm64/kvm/tmi.c | 168 +++++ arch/arm64/kvm/vgic/vgic-v3.c | 18 +- arch/arm64/kvm/vgic/vgic.c | 59 +- arch/arm64/mm/mmu.c | 11 + arch/arm64/mm/pageattr.c | 9 +- drivers/irqchip/irq-gic-v3-its.c | 229 ++++++- drivers/perf/arm_pmu.c | 17 + include/kvm/arm_arch_timer.h | 4 + include/linux/kvm_host.h | 23 + include/linux/perf/arm_pmu.h | 3 + include/linux/swiotlb.h | 13 + include/uapi/linux/kvm.h | 27 + kernel/dma/direct.c | 39 ++ kernel/dma/swiotlb.c | 86 ++- virt/kvm/kvm_main.c | 7 +- 37 files changed, 2765 insertions(+), 43 deletions(-) create mode 100644 arch/arm64/include/asm/cvm_guest.h create mode 100644 arch/arm64/include/asm/kvm_tmi.h create mode 100644 arch/arm64/include/asm/kvm_tmm.h create mode 100644 arch/arm64/kvm/cvm.c create mode 100644 arch/arm64/kvm/cvm_exit.c create mode 100644 arch/arm64/kvm/cvm_guest.c create mode 100644 arch/arm64/kvm/tmi.c -- 2.33.0

2 6

[PATCH openEuler-22.03-LTS-SP2] EDAC/thunderx: Fix possible out-of-bounds string access
by Guo Mengqi 10 Apr '24

10 Apr '24

From: Arnd Bergmann <arnd(a)arndb.de> stable inclusion from stable-v5.10.209 commit 6aa7865ba7ff7f0ede0035180fb3b9400ceb405a category: bugfix bugzilla: 189268 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 475c58e1a471e9b873e3e39958c64a2d278275c8 ] Enabling -Wstringop-overflow globally exposes a warning for a common bug in the usage of strncat(): drivers/edac/thunderx_edac.c: In function 'thunderx_ocx_com_threaded_isr': drivers/edac/thunderx_edac.c:1136:17: error: 'strncat' specified bound 1024 equals destination size [-Werror=stringop-overflow=] 1136 | strncat(msg, other, OCX_MESSAGE_SIZE); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... 1145 | strncat(msg, other, OCX_MESSAGE_SIZE); ... 1150 | strncat(msg, other, OCX_MESSAGE_SIZE); ... Apparently the author of this driver expected strncat() to behave the way that strlcat() does, which uses the size of the destination buffer as its third argument rather than the length of the source buffer. The result is that there is no check on the size of the allocated buffer. Change it to strlcat(). [ bp: Trim compiler output, fixup commit message. ] Fixes: 41003396f932 ("EDAC, thunderx: Add Cavium ThunderX EDAC driver") Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Borislav Petkov (AMD) <bp(a)alien8.de> Reviewed-by: Gustavo A. R. Silva <gustavoars(a)kernel.org> Link: https://lore.kernel.org/r/20231122222007.3199885-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Wang Hai <wanghai38(a)huawei.com> --- drivers/edac/thunderx_edac.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/edac/thunderx_edac.c b/drivers/edac/thunderx_edac.c index 0eb5eb97fd74..3b0e1fe27d93 100644 --- a/drivers/edac/thunderx_edac.c +++ b/drivers/edac/thunderx_edac.c @@ -1133,7 +1133,7 @@ static irqreturn_t thunderx_ocx_com_threaded_isr(int irq, void *irq_id) decode_register(other, OCX_OTHER_SIZE, ocx_com_errors, ctx->reg_com_int); - strncat(msg, other, OCX_MESSAGE_SIZE); + strlcat(msg, other, OCX_MESSAGE_SIZE); for (lane = 0; lane < OCX_RX_LANES; lane++) if (ctx->reg_com_int & BIT(lane)) { @@ -1142,12 +1142,12 @@ static irqreturn_t thunderx_ocx_com_threaded_isr(int irq, void *irq_id) lane, ctx->reg_lane_int[lane], lane, ctx->reg_lane_stat11[lane]); - strncat(msg, other, OCX_MESSAGE_SIZE); + strlcat(msg, other, OCX_MESSAGE_SIZE); decode_register(other, OCX_OTHER_SIZE, ocx_lane_errors, ctx->reg_lane_int[lane]); - strncat(msg, other, OCX_MESSAGE_SIZE); + strlcat(msg, other, OCX_MESSAGE_SIZE); } if (ctx->reg_com_int & OCX_COM_INT_CE) @@ -1217,7 +1217,7 @@ static irqreturn_t thunderx_ocx_lnk_threaded_isr(int irq, void *irq_id) decode_register(other, OCX_OTHER_SIZE, ocx_com_link_errors, ctx->reg_com_link_int); - strncat(msg, other, OCX_MESSAGE_SIZE); + strlcat(msg, other, OCX_MESSAGE_SIZE); if (ctx->reg_com_link_int & OCX_COM_LINK_INT_UE) edac_device_handle_ue(ocx->edac_dev, 0, 0, msg); @@ -1896,7 +1896,7 @@ static irqreturn_t thunderx_l2c_threaded_isr(int irq, void *irq_id) decode_register(other, L2C_OTHER_SIZE, l2_errors, ctx->reg_int); - strncat(msg, other, L2C_MESSAGE_SIZE); + strlcat(msg, other, L2C_MESSAGE_SIZE); if (ctx->reg_int & mask_ue) edac_device_handle_ue(l2c->edac_dev, 0, 0, msg); -- 2.17.1

2 1

[PATCH openEuler-22.03-LTS-SP1] EDAC/thunderx: Fix possible out-of-bounds string access
by Guo Mengqi 10 Apr '24

10 Apr '24

From: Arnd Bergmann <arnd(a)arndb.de> stable inclusion from stable-v5.10.209 commit 6aa7865ba7ff7f0ede0035180fb3b9400ceb405a category: bugfix bugzilla: 189268 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 475c58e1a471e9b873e3e39958c64a2d278275c8 ] Enabling -Wstringop-overflow globally exposes a warning for a common bug in the usage of strncat(): drivers/edac/thunderx_edac.c: In function 'thunderx_ocx_com_threaded_isr': drivers/edac/thunderx_edac.c:1136:17: error: 'strncat' specified bound 1024 equals destination size [-Werror=stringop-overflow=] 1136 | strncat(msg, other, OCX_MESSAGE_SIZE); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... 1145 | strncat(msg, other, OCX_MESSAGE_SIZE); ... 1150 | strncat(msg, other, OCX_MESSAGE_SIZE); ... Apparently the author of this driver expected strncat() to behave the way that strlcat() does, which uses the size of the destination buffer as its third argument rather than the length of the source buffer. The result is that there is no check on the size of the allocated buffer. Change it to strlcat(). [ bp: Trim compiler output, fixup commit message. ] Fixes: 41003396f932 ("EDAC, thunderx: Add Cavium ThunderX EDAC driver") Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Borislav Petkov (AMD) <bp(a)alien8.de> Reviewed-by: Gustavo A. R. Silva <gustavoars(a)kernel.org> Link: https://lore.kernel.org/r/20231122222007.3199885-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Wang Hai <wanghai38(a)huawei.com> --- drivers/edac/thunderx_edac.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/edac/thunderx_edac.c b/drivers/edac/thunderx_edac.c index 0eb5eb97fd74..3b0e1fe27d93 100644 --- a/drivers/edac/thunderx_edac.c +++ b/drivers/edac/thunderx_edac.c @@ -1133,7 +1133,7 @@ static irqreturn_t thunderx_ocx_com_threaded_isr(int irq, void *irq_id) decode_register(other, OCX_OTHER_SIZE, ocx_com_errors, ctx->reg_com_int); - strncat(msg, other, OCX_MESSAGE_SIZE); + strlcat(msg, other, OCX_MESSAGE_SIZE); for (lane = 0; lane < OCX_RX_LANES; lane++) if (ctx->reg_com_int & BIT(lane)) { @@ -1142,12 +1142,12 @@ static irqreturn_t thunderx_ocx_com_threaded_isr(int irq, void *irq_id) lane, ctx->reg_lane_int[lane], lane, ctx->reg_lane_stat11[lane]); - strncat(msg, other, OCX_MESSAGE_SIZE); + strlcat(msg, other, OCX_MESSAGE_SIZE); decode_register(other, OCX_OTHER_SIZE, ocx_lane_errors, ctx->reg_lane_int[lane]); - strncat(msg, other, OCX_MESSAGE_SIZE); + strlcat(msg, other, OCX_MESSAGE_SIZE); } if (ctx->reg_com_int & OCX_COM_INT_CE) @@ -1217,7 +1217,7 @@ static irqreturn_t thunderx_ocx_lnk_threaded_isr(int irq, void *irq_id) decode_register(other, OCX_OTHER_SIZE, ocx_com_link_errors, ctx->reg_com_link_int); - strncat(msg, other, OCX_MESSAGE_SIZE); + strlcat(msg, other, OCX_MESSAGE_SIZE); if (ctx->reg_com_link_int & OCX_COM_LINK_INT_UE) edac_device_handle_ue(ocx->edac_dev, 0, 0, msg); @@ -1896,7 +1896,7 @@ static irqreturn_t thunderx_l2c_threaded_isr(int irq, void *irq_id) decode_register(other, L2C_OTHER_SIZE, l2_errors, ctx->reg_int); - strncat(msg, other, L2C_MESSAGE_SIZE); + strlcat(msg, other, L2C_MESSAGE_SIZE); if (ctx->reg_int & mask_ue) edac_device_handle_ue(l2c->edac_dev, 0, 0, msg); -- 2.17.1

2 1

[PATCH openEuler-22.03-LTS] EDAC/thunderx: Fix possible out-of-bounds string access
by Guo Mengqi 10 Apr '24

10 Apr '24

From: Arnd Bergmann <arnd(a)arndb.de> stable inclusion from stable-v5.10.209 commit 6aa7865ba7ff7f0ede0035180fb3b9400ceb405a category: bugfix bugzilla: 189268 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 475c58e1a471e9b873e3e39958c64a2d278275c8 ] Enabling -Wstringop-overflow globally exposes a warning for a common bug in the usage of strncat(): drivers/edac/thunderx_edac.c: In function 'thunderx_ocx_com_threaded_isr': drivers/edac/thunderx_edac.c:1136:17: error: 'strncat' specified bound 1024 equals destination size [-Werror=stringop-overflow=] 1136 | strncat(msg, other, OCX_MESSAGE_SIZE); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... 1145 | strncat(msg, other, OCX_MESSAGE_SIZE); ... 1150 | strncat(msg, other, OCX_MESSAGE_SIZE); ... Apparently the author of this driver expected strncat() to behave the way that strlcat() does, which uses the size of the destination buffer as its third argument rather than the length of the source buffer. The result is that there is no check on the size of the allocated buffer. Change it to strlcat(). [ bp: Trim compiler output, fixup commit message. ] Fixes: 41003396f932 ("EDAC, thunderx: Add Cavium ThunderX EDAC driver") Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Borislav Petkov (AMD) <bp(a)alien8.de> Reviewed-by: Gustavo A. R. Silva <gustavoars(a)kernel.org> Link: https://lore.kernel.org/r/20231122222007.3199885-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Wang Hai <wanghai38(a)huawei.com> --- drivers/edac/thunderx_edac.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/edac/thunderx_edac.c b/drivers/edac/thunderx_edac.c index 0eb5eb97fd74..3b0e1fe27d93 100644 --- a/drivers/edac/thunderx_edac.c +++ b/drivers/edac/thunderx_edac.c @@ -1133,7 +1133,7 @@ static irqreturn_t thunderx_ocx_com_threaded_isr(int irq, void *irq_id) decode_register(other, OCX_OTHER_SIZE, ocx_com_errors, ctx->reg_com_int); - strncat(msg, other, OCX_MESSAGE_SIZE); + strlcat(msg, other, OCX_MESSAGE_SIZE); for (lane = 0; lane < OCX_RX_LANES; lane++) if (ctx->reg_com_int & BIT(lane)) { @@ -1142,12 +1142,12 @@ static irqreturn_t thunderx_ocx_com_threaded_isr(int irq, void *irq_id) lane, ctx->reg_lane_int[lane], lane, ctx->reg_lane_stat11[lane]); - strncat(msg, other, OCX_MESSAGE_SIZE); + strlcat(msg, other, OCX_MESSAGE_SIZE); decode_register(other, OCX_OTHER_SIZE, ocx_lane_errors, ctx->reg_lane_int[lane]); - strncat(msg, other, OCX_MESSAGE_SIZE); + strlcat(msg, other, OCX_MESSAGE_SIZE); } if (ctx->reg_com_int & OCX_COM_INT_CE) @@ -1217,7 +1217,7 @@ static irqreturn_t thunderx_ocx_lnk_threaded_isr(int irq, void *irq_id) decode_register(other, OCX_OTHER_SIZE, ocx_com_link_errors, ctx->reg_com_link_int); - strncat(msg, other, OCX_MESSAGE_SIZE); + strlcat(msg, other, OCX_MESSAGE_SIZE); if (ctx->reg_com_link_int & OCX_COM_LINK_INT_UE) edac_device_handle_ue(ocx->edac_dev, 0, 0, msg); @@ -1896,7 +1896,7 @@ static irqreturn_t thunderx_l2c_threaded_isr(int irq, void *irq_id) decode_register(other, L2C_OTHER_SIZE, l2_errors, ctx->reg_int); - strncat(msg, other, L2C_MESSAGE_SIZE); + strlcat(msg, other, L2C_MESSAGE_SIZE); if (ctx->reg_int & mask_ue) edac_device_handle_ue(l2c->edac_dev, 0, 0, msg); -- 2.17.1

2 1

[PATCH V2 OLK-6.6] mm, fs: Add BPF_READAHEAD_OPTIMIZATION option for bpf readhead
by ZhaoLong Wang 10 Apr '24

10 Apr '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I7Y9JD CVE: NA --------------------------- This patch introduces a new configuration option called BPF_READAHEAD_OPTIMIZATION, which is designed to optimize the read performance in Spark SQL scenarios using eBPF to implement a programmable kernel. The changes include: - Add CONFIG_BPF_READAHEAD_OPTIMIZATION to mm/Kconfig, which depends on CONFIG_TRACEPOINTS. - Add conditional compilation directives to fs/ext4/file.c, fs/read_write.c, fs/xfs/xfs_file.c, and include/linux/fs.h to include tracepoint-related headers and functions only when BPF_READAHEAD_OPTIMIZATION is enabled. - Miodify page_cache_sync_ra() in mm/readahead.c to disable forced readahead when BPF_READAHEAD_OPTIMIZATION is not enabled. V2: Explicitly set CONFIG_ in openeuler_defconfig. Do not add redundant macros to mm/readahead. Signed-off-by: ZhaoLong Wang <wangzhaolong1(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 1 + arch/powerpc/configs/openeuler_defconfig | 1 + arch/riscv/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/ext4/file.c | 6 ++++++ fs/read_write.c | 2 +- fs/xfs/xfs_file.c | 7 ++++++- include/linux/fs.h | 9 +++++++++ mm/Kconfig | 9 +++++++++ 9 files changed, 35 insertions(+), 2 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index afd13d9e3840..fe3ad1d678b9 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -1191,6 +1191,7 @@ CONFIG_DYNAMIC_POOL=y CONFIG_ETMEM_SCAN=m CONFIG_ETMEM_SWAP=m CONFIG_ETMEM=y +# CONFIG_BPF_READAHEAD_OPTIMIZATION is not set # # Data Access Monitoring diff --git a/arch/powerpc/configs/openeuler_defconfig b/arch/powerpc/configs/openeuler_defconfig index 152b941da1d5..793cca85862c 100644 --- a/arch/powerpc/configs/openeuler_defconfig +++ b/arch/powerpc/configs/openeuler_defconfig @@ -860,6 +860,7 @@ CONFIG_ARCH_HAS_HUGEPD=y CONFIG_USERFAULTFD=y # CONFIG_LRU_GEN is not set CONFIG_LOCK_MM_AND_FIND_VMA=y +# CONFIG_BPF_READAHEAD_OPTIMIZATION is not set # # Data Access Monitoring diff --git a/arch/riscv/configs/openeuler_defconfig b/arch/riscv/configs/openeuler_defconfig index cb132f4576da..06caed7e855a 100644 --- a/arch/riscv/configs/openeuler_defconfig +++ b/arch/riscv/configs/openeuler_defconfig @@ -825,6 +825,7 @@ CONFIG_ARCH_SUPPORTS_PER_VMA_LOCK=y CONFIG_PER_VMA_LOCK=y CONFIG_LOCK_MM_AND_FIND_VMA=y # CONFIG_PAGE_CACHE_LIMIT is not set +# CONFIG_BPF_READAHEAD_OPTIMIZATION is not set # # Data Access Monitoring diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 360c382f4d9e..da6c5bd3eaa1 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -1179,6 +1179,7 @@ CONFIG_DYNAMIC_POOL=y CONFIG_ETMEM_SCAN=m CONFIG_ETMEM_SWAP=m CONFIG_ETMEM=y +# CONFIG_BPF_READAHEAD_OPTIMIZATION is not set # # Data Access Monitoring diff --git a/fs/ext4/file.c b/fs/ext4/file.c index 324b45b51d1f..14f1441c3391 100644 --- a/fs/ext4/file.c +++ b/fs/ext4/file.c @@ -30,7 +30,9 @@ #include <linux/uio.h> #include <linux/mman.h> #include <linux/backing-dev.h> +#ifdef CONFIG_BPF_READAHEAD_OPTIMIZATION #include <trace/events/fs.h> +#endif #include "ext4.h" #include "ext4_jbd2.h" #include "xattr.h" @@ -145,7 +147,9 @@ static ssize_t ext4_file_read_iter(struct kiocb *iocb, struct iov_iter *to) if (iocb->ki_flags & IOCB_DIRECT) return ext4_dio_read_iter(iocb, to); +#ifdef CONFIG_BPF_READAHEAD_OPTIMIZATION fs_file_read_do_trace(iocb); +#endif return generic_file_read_iter(iocb, to); } @@ -167,7 +171,9 @@ static ssize_t ext4_file_splice_read(struct file *in, loff_t *ppos, */ static int ext4_release_file(struct inode *inode, struct file *filp) { +#ifdef CONFIG_BPF_READAHEAD_OPTIMIZATION trace_fs_file_release(inode, filp); +#endif if (ext4_test_inode_state(inode, EXT4_STATE_DA_ALLOC_CLOSE)) { ext4_alloc_da_blocks(inode); diff --git a/fs/read_write.c b/fs/read_write.c index 3d69fb284d10..2ee9a07f7208 100644 --- a/fs/read_write.c +++ b/fs/read_write.c @@ -1721,7 +1721,7 @@ int generic_file_rw_checks(struct file *file_in, struct file *file_out) return 0; } -#ifdef CONFIG_TRACEPOINTS +#ifdef CONFIG_BPF_READAHEAD_OPTIMIZATION static void fs_file_read_ctx_init(struct fs_file_read_ctx *ctx, struct file *filp, loff_t pos) { diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c index ecf10d3aec17..7a4bd39bc694 100644 --- a/fs/xfs/xfs_file.c +++ b/fs/xfs/xfs_file.c @@ -31,7 +31,9 @@ #include <linux/mman.h> #include <linux/fadvise.h> #include <linux/mount.h> +#ifdef CONFIG_BPF_READAHEAD_OPTIMIZATION #include <trace/events/fs.h> +#endif static const struct vm_operations_struct xfs_file_vm_ops; @@ -308,8 +310,9 @@ xfs_file_buffered_read( ssize_t ret; trace_xfs_file_buffered_read(iocb, to); +#ifdef CONFIG_BPF_READAHEAD_OPTIMIZATION fs_file_read_do_trace(iocb); - +#endif ret = xfs_ilock_iocb(iocb, XFS_IOLOCK_SHARED); if (ret) return ret; @@ -1266,7 +1269,9 @@ xfs_file_release( struct inode *inode, struct file *filp) { +#ifdef CONFIG_BPF_READAHEAD_OPTIMIZATION trace_fs_file_release(inode, filp); +#endif return xfs_release(XFS_I(inode)); } diff --git a/include/linux/fs.h b/include/linux/fs.h index d74314a8fa94..5e09be647907 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -43,7 +43,9 @@ #include <linux/cred.h> #include <linux/mnt_idmapping.h> #include <linux/slab.h> +#ifdef CONFIG_BPF_READAHEAD_OPTIMIZATION #include <linux/tracepoint-defs.h> +#endif #include <linux/kabi.h> #include <asm/byteorder.h> @@ -190,11 +192,16 @@ typedef int (dio_iodone_t)(struct kiocb *iocb, loff_t offset, /* File supports async nowait buffered writes */ #define FMODE_BUF_WASYNC ((__force fmode_t)0x80000000) +#ifdef CONFIG_BPF_READAHEAD_OPTIMIZATION /* File mode control flag, expect random access pattern */ #define FMODE_CTL_RANDOM ((__force fmode_t)0x1000) /* File mode control flag, will try to read head of the file into pagecache */ #define FMODE_CTL_WILLNEED ((__force fmode_t)0x400000) +#else +#define FMODE_CTL_RANDOM 0 +#define FMODE_CTL_WILLNEED 0 +#endif /* * Attribute flags. These should be or-ed together to figure out what @@ -3524,6 +3531,7 @@ struct fs_file_read_ctx { long long index; }; +#ifdef CONFIG_BPF_READAHEAD_OPTIMIZATION #ifdef CONFIG_TRACEPOINTS DECLARE_TRACEPOINT(fs_file_read); extern void fs_file_read_update_args_by_trace(struct kiocb *iocb); @@ -3536,4 +3544,5 @@ static inline void fs_file_read_do_trace(struct kiocb *iocb) if (tracepoint_enabled(fs_file_read)) fs_file_read_update_args_by_trace(iocb); } +#endif #endif /* _LINUX_FS_H */ diff --git a/mm/Kconfig b/mm/Kconfig index cdbb1ceaa554..0c22baa52542 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -1424,6 +1424,15 @@ config ETMEM high-performance storage media to release memory space and reduce memory costs. +config BPF_READAHEAD_OPTIMIZATION + bool "Enable bpf readahead optimization" + select TRACEPOINTS + default n + help + EBPF is used to implement a programmable kernel. The readahead behavior + of the kernel is adjusted based on the application read mode to optimize + the read performance in the Spark SQL scenario, + source "mm/damon/Kconfig" endmenu -- 2.39.2

2 1

[PATCH openEuler-1.0-LTS] RDMA/qedr: Fix qedr_create_user_qp error flow
by Ziyang Xuan 10 Apr '24

10 Apr '24

From: Kamal Heib <kheib(a)redhat.com> mainline inclusion from mainline-v6.8-rc6 commit 5ba4e6d5863c53e937f49932dee0ecb004c65928 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I9E2M7 CVE: CVE-2024-26743 -------------------------------- Avoid the following warning by making sure to free the allocated resources in case that qedr_init_user_queue() fail. -----------[ cut here ]----------- WARNING: CPU: 0 PID: 143192 at drivers/infiniband/core/rdma_core.c:874 uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] Modules linked in: tls target_core_user uio target_core_pscsi target_core_file target_core_iblock ib_srpt ib_srp scsi_transport_srp nfsd nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs 8021q garp mrp stp llc ext4 mbcache jbd2 opa_vnic ib_umad ib_ipoib sunrpc rdma_ucm ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm hfi1 intel_rapl_msr intel_rapl_common mgag200 qedr sb_edac drm_shmem_helper rdmavt x86_pkg_temp_thermal drm_kms_helper intel_powerclamp ib_uverbs coretemp i2c_algo_bit kvm_intel dell_wmi_descriptor ipmi_ssif sparse_keymap kvm ib_core rfkill syscopyarea sysfillrect video sysimgblt irqbypass ipmi_si ipmi_devintf fb_sys_fops rapl iTCO_wdt mxm_wmi iTCO_vendor_support intel_cstate pcspkr dcdbas intel_uncore ipmi_msghandler lpc_ich acpi_power_meter mei_me mei fuse drm xfs libcrc32c qede sd_mod ahci libahci t10_pi sg crct10dif_pclmul crc32_pclmul crc32c_intel qed libata tg3 ghash_clmulni_intel megaraid_sas crc8 wmi [last unloaded: ib_srpt] CPU: 0 PID: 143192 Comm: fi_rdm_tagged_p Kdump: loaded Not tainted 5.14.0-408.el9.x86_64 #1 Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 2.14.0 01/25/2022 RIP: 0010:uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] Code: 5d 41 5c 41 5d 41 5e e9 0f 26 1b dd 48 89 df e8 67 6a ff ff 49 8b 86 10 01 00 00 48 85 c0 74 9c 4c 89 e7 e8 83 c0 cb dd eb 92 <0f> 0b eb be 0f 0b be 04 00 00 00 48 89 df e8 8e f5 ff ff e9 6d ff RSP: 0018:ffffb7c6cadfbc60 EFLAGS: 00010286 RAX: ffff8f0889ee3f60 RBX: ffff8f088c1a5200 RCX: 00000000802a0016 RDX: 00000000802a0017 RSI: 0000000000000001 RDI: ffff8f0880042600 RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8f11fffd5000 R11: 0000000000039000 R12: ffff8f0d5b36cd80 R13: ffff8f088c1a5250 R14: ffff8f1206d91000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8f11d7c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000147069200e20 CR3: 00000001c7210002 CR4: 00000000001706f0 Call Trace: <TASK> ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? ib_uverbs_close+0x1f/0xb0 [ib_uverbs] ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ? __warn+0x81/0x110 ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ? report_bug+0x10a/0x140 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ib_uverbs_close+0x1f/0xb0 [ib_uverbs] __fput+0x94/0x250 task_work_run+0x5c/0x90 do_exit+0x270/0x4a0 do_group_exit+0x2d/0x90 get_signal+0x87c/0x8c0 arch_do_signal_or_restart+0x25/0x100 ? ib_uverbs_ioctl+0xc2/0x110 [ib_uverbs] exit_to_user_mode_loop+0x9c/0x130 exit_to_user_mode_prepare+0xb6/0x100 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x22/0x40 ? do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x22/0x40 ? do_syscall_64+0x69/0x90 ? do_syscall_64+0x69/0x90 ? common_interrupt+0x43/0xa0 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x1470abe3ec6b Code: Unable to access opcode bytes at RIP 0x1470abe3ec41. RSP: 002b:00007fff13ce9108 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: fffffffffffffffc RBX: 00007fff13ce9218 RCX: 00001470abe3ec6b RDX: 00007fff13ce9200 RSI: 00000000c0181b01 RDI: 0000000000000004 RBP: 00007fff13ce91e0 R08: 0000558d9655da10 R09: 0000558d9655dd00 R10: 00007fff13ce95c0 R11: 0000000000000246 R12: 00007fff13ce9358 R13: 0000000000000013 R14: 0000558d9655db50 R15: 00007fff13ce9470 </TASK> --[ end trace 888a9b92e04c5c97 ]-- Fixes: df15856132bc ("RDMA/qedr: restructure functions that create/destroy QPs") Signed-off-by: Kamal Heib <kheib(a)redhat.com> Link: https://lore.kernel.org/r/20240208223628.2040841-1-kheib@redhat.com Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Conflicts: drivers/infiniband/hw/qedr/verbs.c Signed-off-by: Ziyang Xuan <william.xuanziyang(a)huawei.com> --- drivers/infiniband/hw/qedr/verbs.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c index 9167a1c40bcf..830d94e33134 100644 --- a/drivers/infiniband/hw/qedr/verbs.c +++ b/drivers/infiniband/hw/qedr/verbs.c @@ -1744,8 +1744,17 @@ static int qedr_create_user_qp(struct qedr_dev *dev, /* RQ - read access only (0), dma sync not required (0) */ rc = qedr_init_user_queue(ib_ctx, dev, &qp->urq, ureq.rq_addr, ureq.rq_len, 0, 0, alloc_and_init); - if (rc) + if (rc) { + ib_umem_release(qp->usq.umem); + qp->usq.umem = NULL; + if (rdma_protocol_roce(&dev->ibdev, 1)) { + qedr_free_pbl(dev, &qp->usq.pbl_info, + qp->usq.pbl_tbl); + } else { + kfree(qp->usq.pbl_tbl); + } return rc; + } } memset(&in_params, 0, sizeof(in_params)); -- 2.25.1

2 1

[PATCH OLK-5.10] RDMA/qedr: Fix qedr_create_user_qp error flow
by Ziyang Xuan 10 Apr '24

10 Apr '24

From: Kamal Heib <kheib(a)redhat.com> stable inclusion from stable-v5.10.211 commit 5639414a52a29336ffa1ede80a67c6d927acbc5a category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I9E2M7 CVE: CVE-2024-26743 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 5ba4e6d5863c53e937f49932dee0ecb004c65928 ] Avoid the following warning by making sure to free the allocated resources in case that qedr_init_user_queue() fail. -----------[ cut here ]----------- WARNING: CPU: 0 PID: 143192 at drivers/infiniband/core/rdma_core.c:874 uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] Modules linked in: tls target_core_user uio target_core_pscsi target_core_file target_core_iblock ib_srpt ib_srp scsi_transport_srp nfsd nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs 8021q garp mrp stp llc ext4 mbcache jbd2 opa_vnic ib_umad ib_ipoib sunrpc rdma_ucm ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm hfi1 intel_rapl_msr intel_rapl_common mgag200 qedr sb_edac drm_shmem_helper rdmavt x86_pkg_temp_thermal drm_kms_helper intel_powerclamp ib_uverbs coretemp i2c_algo_bit kvm_intel dell_wmi_descriptor ipmi_ssif sparse_keymap kvm ib_core rfkill syscopyarea sysfillrect video sysimgblt irqbypass ipmi_si ipmi_devintf fb_sys_fops rapl iTCO_wdt mxm_wmi iTCO_vendor_support intel_cstate pcspkr dcdbas intel_uncore ipmi_msghandler lpc_ich acpi_power_meter mei_me mei fuse drm xfs libcrc32c qede sd_mod ahci libahci t10_pi sg crct10dif_pclmul crc32_pclmul crc32c_intel qed libata tg3 ghash_clmulni_intel megaraid_sas crc8 wmi [last unloaded: ib_srpt] CPU: 0 PID: 143192 Comm: fi_rdm_tagged_p Kdump: loaded Not tainted 5.14.0-408.el9.x86_64 #1 Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 2.14.0 01/25/2022 RIP: 0010:uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] Code: 5d 41 5c 41 5d 41 5e e9 0f 26 1b dd 48 89 df e8 67 6a ff ff 49 8b 86 10 01 00 00 48 85 c0 74 9c 4c 89 e7 e8 83 c0 cb dd eb 92 <0f> 0b eb be 0f 0b be 04 00 00 00 48 89 df e8 8e f5 ff ff e9 6d ff RSP: 0018:ffffb7c6cadfbc60 EFLAGS: 00010286 RAX: ffff8f0889ee3f60 RBX: ffff8f088c1a5200 RCX: 00000000802a0016 RDX: 00000000802a0017 RSI: 0000000000000001 RDI: ffff8f0880042600 RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8f11fffd5000 R11: 0000000000039000 R12: ffff8f0d5b36cd80 R13: ffff8f088c1a5250 R14: ffff8f1206d91000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8f11d7c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000147069200e20 CR3: 00000001c7210002 CR4: 00000000001706f0 Call Trace: <TASK> ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? ib_uverbs_close+0x1f/0xb0 [ib_uverbs] ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ? __warn+0x81/0x110 ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ? report_bug+0x10a/0x140 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ib_uverbs_close+0x1f/0xb0 [ib_uverbs] __fput+0x94/0x250 task_work_run+0x5c/0x90 do_exit+0x270/0x4a0 do_group_exit+0x2d/0x90 get_signal+0x87c/0x8c0 arch_do_signal_or_restart+0x25/0x100 ? ib_uverbs_ioctl+0xc2/0x110 [ib_uverbs] exit_to_user_mode_loop+0x9c/0x130 exit_to_user_mode_prepare+0xb6/0x100 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x22/0x40 ? do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x22/0x40 ? do_syscall_64+0x69/0x90 ? do_syscall_64+0x69/0x90 ? common_interrupt+0x43/0xa0 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x1470abe3ec6b Code: Unable to access opcode bytes at RIP 0x1470abe3ec41. RSP: 002b:00007fff13ce9108 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: fffffffffffffffc RBX: 00007fff13ce9218 RCX: 00001470abe3ec6b RDX: 00007fff13ce9200 RSI: 00000000c0181b01 RDI: 0000000000000004 RBP: 00007fff13ce91e0 R08: 0000558d9655da10 R09: 0000558d9655dd00 R10: 00007fff13ce95c0 R11: 0000000000000246 R12: 00007fff13ce9358 R13: 0000000000000013 R14: 0000558d9655db50 R15: 00007fff13ce9470 </TASK> --[ end trace 888a9b92e04c5c97 ]-- Fixes: df15856132bc ("RDMA/qedr: restructure functions that create/destroy QPs") Signed-off-by: Kamal Heib <kheib(a)redhat.com> Link: https://lore.kernel.org/r/20240208223628.2040841-1-kheib@redhat.com Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Ziyang Xuan <william.xuanziyang(a)huawei.com> --- drivers/infiniband/hw/qedr/verbs.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c index 3543b9af10b7..d382ac21159c 100644 --- a/drivers/infiniband/hw/qedr/verbs.c +++ b/drivers/infiniband/hw/qedr/verbs.c @@ -1865,8 +1865,17 @@ static int qedr_create_user_qp(struct qedr_dev *dev, /* RQ - read access only (0) */ rc = qedr_init_user_queue(udata, dev, &qp->urq, ureq.rq_addr, ureq.rq_len, true, 0, alloc_and_init); - if (rc) + if (rc) { + ib_umem_release(qp->usq.umem); + qp->usq.umem = NULL; + if (rdma_protocol_roce(&dev->ibdev, 1)) { + qedr_free_pbl(dev, &qp->usq.pbl_info, + qp->usq.pbl_tbl); + } else { + kfree(qp->usq.pbl_tbl); + } return rc; + } } memset(&in_params, 0, sizeof(in_params)); -- 2.25.1

2 1

[PATCH OLK-5.10 0/1] CVE-2021-46926
by Liu Mingrui 10 Apr '24

10 Apr '24

CVE-2021-46926 Libin Yang (1): ALSA: hda: intel-sdw-acpi: harden detection of controller drivers/soundwire/intel_init.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) -- 2.25.1

2 2