- Kernel - mailweb.openeuler.org

[PATCH OLK-5.10 V1 1/3] HID: split apart hid_device_probe to make logic more apparent
by Yao Yiqi 22 Sep '26

22 Sep '26

From: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> stable inclusion from stable-v5.10.270 commit e51882f2bf470ef77484ebd3b648553173253511 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/19484 CVE: CVE-2026-90329 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 207733f9266194b3cd90ddae723a1f82eb64030b ] hid_device_probe() has a complex flow and locks and unlocks a mutex. Move the most of the logic into __hid_device_probe() and hid_check_device_match() and leave the locking in hid_device_probe() which makes the code more clear. Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Jiri Kosina <jkosina(a)suse.cz> Stable-dep-of: 207853d46f7e ("HID: synchronize input before cleaning up a failed probe") Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yao Yiqi <yaoyiqi3(a)huawei.com> --- drivers/hid/hid-core.c | 101 ++++++++++++++++++++++------------------- 1 file changed, 54 insertions(+), 47 deletions(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index b17bdbc9d2a7..31378bb8c559 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -2283,64 +2283,71 @@ bool hid_compare_device_paths(struct hid_device *hdev_a, } EXPORT_SYMBOL_GPL(hid_compare_device_paths); +static bool hid_check_device_match(struct hid_device *hdev, + struct hid_driver *hdrv, + const struct hid_device_id **id) +{ + *id = hid_match_device(hdev, hdrv); + if (!*id) + return -ENODEV; + + if (hdrv->match) + return hdrv->match(hdev, hid_ignore_special_drivers); + + /* + * hid-generic implements .match(), so we must be dealing with a + * different HID driver here, and can simply check if + * hid_ignore_special_drivers is set or not. + */ + return !hid_ignore_special_drivers; +} + +static int __hid_device_probe(struct hid_device *hdev, struct hid_driver *hdrv) +{ + const struct hid_device_id *id; + int ret; + + if (!hid_check_device_match(hdev, hdrv, &id)) + return -ENODEV; + + /* reset the quirks that has been previously set */ + hdev->quirks = hid_lookup_quirk(hdev); + hdev->driver = hdrv; + + if (hdrv->probe) { + ret = hdrv->probe(hdev, id); + } else { /* default probe */ + ret = hid_open_report(hdev); + if (!ret) + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + } + + if (ret) { + hid_close_report(hdev); + hdev->driver = NULL; + } + + return ret; +} + static int hid_device_probe(struct device *dev) { - struct hid_driver *hdrv = to_hid_driver(dev->driver); struct hid_device *hdev = to_hid_device(dev); - const struct hid_device_id *id; + struct hid_driver *hdrv = to_hid_driver(dev->driver); int ret = 0; - if (down_interruptible(&hdev->driver_input_lock)) { - ret = -EINTR; - goto end; - } - hdev->io_started = false; + if (down_interruptible(&hdev->driver_input_lock)) + return -EINTR; + hdev->io_started = false; clear_bit(ffs(HID_STAT_REPROBED), &hdev->status); - if (!hdev->driver) { - id = hid_match_device(hdev, hdrv); - if (id == NULL) { - ret = -ENODEV; - goto unlock; - } + if (!hdev->driver) + ret = __hid_device_probe(hdev, hdrv); - if (hdrv->match) { - if (!hdrv->match(hdev, hid_ignore_special_drivers)) { - ret = -ENODEV; - goto unlock; - } - } else { - /* - * hid-generic implements .match(), so if - * hid_ignore_special_drivers is set, we can safely - * return. - */ - if (hid_ignore_special_drivers) { - ret = -ENODEV; - goto unlock; - } - } - - /* reset the quirks that has been previously set */ - hdev->quirks = hid_lookup_quirk(hdev); - hdev->driver = hdrv; - if (hdrv->probe) { - ret = hdrv->probe(hdev, id); - } else { /* default probe */ - ret = hid_open_report(hdev); - if (!ret) - ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); - } - if (ret) { - hid_close_report(hdev); - hdev->driver = NULL; - } - } -unlock: if (!hdev->io_started) up(&hdev->driver_input_lock); -end: + return ret; } -- 2.34.1

2 3

[PATCH OLK-6.6] params: fix charp corruption on allocation failure
by Pan Taixi 22 Sep '26

22 Sep '26

param_set_charp() stores charp parameters in allocated memory after slab is available, and releases the previous value when the parameter is updated. The previous value is released before the replacement allocation succeeds. If kmalloc_parameter() fails, the setter returns -ENOMEM with the parameter left as NULL. Failing zswap's compressor update before zswap is initialized can later trigger: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:strcmp+0x10/0x30 Call Trace: zswap_setup+0x3b1/0x490 zswap_enabled_param_set+0x5b/0xa0 param_attr_store+0x93/0xe0 module_attr_store+0x1c/0x30 kernfs_fop_write_iter+0x116/0x1f0 Allocate and copy the replacement first, then replace the parameter value only after allocation succeeds. Fixes: e180a6b7759a ("param: fix charp parameters set via sysfs") Cc: stable(a)vger.kernel.org Upstream commit 3dfaae04243cde460d82dfc2a7dd0bb6664d20ae Signed-off-by: Jiacheng Yu <yujiacheng3(a)huawei.com> Reviewed-by: Petr Pavlu <petr.pavlu(a)suse.com> Signed-off-by: Petr Pavlu <petr.pavlu(a)suse.com> [backport to OLK-6.6: linux-6.6.y LTS has not received this fix (stable backported only 6.12.y / 6.18.y / 7.2.y), so the mainline patch is adapted by hand. Only the hunk context differs: OLK-6.6 still uses the strlen() based length check from before fd0cd057a1b73516 ("params: Do not go over the limit when getting the string length", v6.8-rc1) and the one-line comment style from before b5e3f86a47d34 ("params: Fix multi-line comment style", v6.8-rc1), so both are kept verbatim and strcpy() is kept since val is NUL-terminated here. Neither commit is on this CVE's dependency chain (Fixes: e180a6b7759a, 2009), and the restructure (char *tmp, allocate+copy first, then maybe_kfree_parameter() and assign) matches the mainline fix.] Signed-off-by: Pan Taixi <pantaixi1(a)huawei.com> --- kernel/params.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/kernel/params.c b/kernel/params.c index 9d09ea99363f..d7afd70cfe45 100644 --- a/kernel/params.c +++ b/kernel/params.c @@ -262,26 +262,29 @@ int param_set_uint_minmax(const char *val, const struct kernel_param *kp, } EXPORT_SYMBOL_GPL(param_set_uint_minmax); int param_set_charp(const char *val, const struct kernel_param *kp) { + char *tmp; + if (strlen(val) > 1024) { pr_err("%s: string parameter too long\n", kp->name); return -ENOSPC; } - maybe_kfree_parameter(*(char **)kp->arg); - /* This is a hack. We can't kmalloc in early boot, and we * don't need to; this mangled commandline is preserved. */ if (slab_is_available()) { - *(char **)kp->arg = kmalloc_parameter(strlen(val)+1); - if (!*(char **)kp->arg) + tmp = kmalloc_parameter(strlen(val) + 1); + if (!tmp) return -ENOMEM; - strcpy(*(char **)kp->arg, val); + strcpy(tmp, val); } else - *(const char **)kp->arg = val; + tmp = (char *)val; + + maybe_kfree_parameter(*(char **)kp->arg); + *(char **)kp->arg = tmp; return 0; } EXPORT_SYMBOL(param_set_charp); -- 2.34.1

2 1

[PATCH OLK-5.10 V1] IB/isert: reject login PDUs declaring more data than was received
by Yao Yiqi 22 Sep '26

22 Sep '26

From: Yehyeong Lee <yhlee(a)isslab.korea.ac.kr> stable inclusion from stable-v5.10.270 commit b1f3313e7b3e396e4985fea5c709477387e0a065 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/19431 CVE: CVE-2026-90413 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 2488b5b4827e5415768afc8daf097e8eb83c98df ] isert_login_recv_done() records how many bytes the HCA actually placed in the login buffer, but nothing compares that against the length the login PDU's BHS declares. isert_rx_login_req() copies min(login_req_len, MAX_KEY_VALUE_PAIRS) bytes into login->req_buf, and the login code then reads the declared length back out of that buffer - for the first PDU in iscsi_target_locate_portal(), payload_length = ntoh24(login_req->dlength); tmpbuf = kmemdup_nul(login->req_buf, payload_length, GFP_KERNEL); and for the ones after it in iscsi_decode_text_input(), reached from iscsi_target_do_login(). login->req_buf is a fixed MAX_KEY_VALUE_PAIRS (8192) byte allocation, so an initiator that declares more than it sends reads off the end of it, before authentication and with the length under its control: BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80 Read of size 8193 at addr ffff8881056a8000 by task iscsi_np/167 __asan_memcpy+0x23/0x60 kmemdup_nul+0x43/0x80 iscsi_target_locate_portal+0x48d/0x1180 iscsi_target_login_thread+0x19a9/0x3350 Allocated by task 167: __kmalloc_cache_noprof+0x158/0x370 iscsi_target_login_thread+0x971/0x3350 which belongs to the cache kmalloc-8k of size 8192 allocated 8192-byte region Falsifying the second login PDU instead reaches the other reader, on the same buffer: BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80 Read of size 8193 at addr ffff888104d10000 by task kworker/1:1/50 Workqueue: isert_login_wq iscsi_target_do_login_rx __asan_memcpy+0x23/0x60 kmemdup_nul+0x43/0x80 iscsi_decode_text_input+0xc6/0x11c0 iscsi_target_do_login+0x261/0x1470 iscsi_target_do_login_rx+0x51d/0x7d0 iscsit over TCP is not exposed: iscsit_get_login_rx() validates the declared length with iscsi_target_check_login_request() and then reads exactly that many bytes off the socket, so the declared length governs how much arrives rather than how much is copied out of an already-filled buffer. isert does not call iscsi_target_check_login_request() at all. Reject a login PDU whose declared DataSegmentLength exceeds what was received, in both paths that reach isert_rx_login_req(): isert_get_login_rx() for the first login PDU and isert_login_recv_done() for the ones after it. dlength <= login_req_len is allowed because the received count can include up to three bytes of iSCSI padding. Once the check is in place the copy out can no longer exceed the copy in: the posted login SGE is ISER_RX_PAYLOAD_SIZE, so login_req_len cannot exceed MAX_KEY_VALUE_PAIRS and the min() in isert_rx_login_req() is login_req_len. Like the existing short-PDU check added by 29e7b925ae6d, the reject in isert_login_recv_done() returns without completing login_req_comp, so a malformed subsequent PDU leaves the login to be torn down by the login timer rather than failing immediately. The first-PDU path returns an error and fails straight away. Reproduced on 7.2.0-rc4 with soft-RoCE (rdma_rxe) under KASAN, using an initiator that sends the real key=value payload while declaring 8193 in the BHS, on the first login PDU and on the second in separate runs. The reported read size tracks the declared value exactly; 16384 and 61440 behave the same. Unpatched 3 of 3 runs report on each of the two paths, patched 0 of 3 on both, run alternately in a single session, and a normal login still completes on the patched build. Fixes: b8d26b3be8b3 ("iser-target: Add iSCSI Extensions for RDMA (iSER) target driver") Suggested-by: Leon Romanovsky <leonro(a)nvidia.com> Signed-off-by: Yehyeong Lee <yhlee(a)isslab.korea.ac.kr> Link: https://patch.msgid.link/20260726163931.971063-3-yhlee@isslab.korea.ac.kr Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yao Yiqi <yaoyiqi3(a)huawei.com> --- drivers/infiniband/ulp/isert/ib_isert.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c index 9f8d6113efb4..6145611f963b 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -975,6 +975,21 @@ isert_put_login_tx(struct iscsi_conn *conn, struct iscsi_login *login, return 0; } +static int +isert_check_login_req(struct isert_conn *isert_conn) +{ + struct iscsi_hdr *hdr = isert_get_iscsi_hdr(isert_conn->login_desc); + u32 dlength = ntoh24(hdr->dlength); + + if (unlikely(dlength > (u32)isert_conn->login_req_len)) { + isert_dbg("login PDU declares %u data bytes but only %d were received\n", + dlength, isert_conn->login_req_len); + return -EINVAL; + } + + return 0; +} + static void isert_rx_login_req(struct isert_conn *isert_conn) { @@ -1399,8 +1414,12 @@ isert_login_recv_done(struct ib_cq *cq, struct ib_wc *wc) if (isert_conn->conn) { struct iscsi_login *login = isert_conn->conn->conn_login; - if (login && !login->first_request) + if (login && !login->first_request) { + if (isert_check_login_req(isert_conn)) + return; + isert_rx_login_req(isert_conn); + } } mutex_lock(&isert_conn->mutex); @@ -2355,6 +2374,10 @@ isert_get_login_rx(struct iscsi_conn *conn, struct iscsi_login *login) if (!login->first_request) return 0; + ret = isert_check_login_req(isert_conn); + if (ret) + return ret; + isert_rx_login_req(isert_conn); isert_info("before login_comp conn: %p\n", conn); -- 2.34.1

2 1

[PATCH OLK-5.10 V1] IB/isert: reject PDUs declaring more data than was received
by Yao Yiqi 22 Sep '26

22 Sep '26

From: Yehyeong Lee <yhlee(a)isslab.korea.ac.kr> stable inclusion from stable-v5.10.270 commit b4706722ed3ea72882b3c986a19b4a1ba66384c4 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/19430 CVE: CVE-2026-90414 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 957f92ea4022fb6af4618271615a2a21a7b5bef9 ] isert_recv_done() hands each received PDU to the opcode handlers without ever looking at wc->byte_len, the number of bytes the HCA actually placed in the receive descriptor. The handlers then copy that many bytes - the data-segment length the initiator declared in the BHS (ntoh24(hdr->dlength), via the derived unsol_data_len / imm_data_len) - out of the fixed-size descriptor: isert_handle_iscsi_dataout(): sg_copy_from_buffer(sg_start, sg_nents, isert_get_data(rx_desc), unsol_data_len); isert_handle_scsi_cmd(): sg_copy_from_buffer(cmd->se_cmd.t_data_sg, sg_nents, isert_get_data(rx_desc), imm_data_len); Because the declared length is never checked against wc->byte_len, an initiator can declare a data segment larger than the bytes it actually sent (and larger than the descriptor) and cause an out-of-bounds read of the receive buffer. Nothing upstream of isert closes this door: - __iscsit_check_dataout_hdr() bounds the inbound payload against conn_ops->MaxXmitDataSegmentLength (MXDSL) - a transmit parameter, used here for the inbound check. - iscsi_set_connection_parameters() sets ops->MaxXmitDataSegmentLength = ops->TargetRecvDataSegmentLength; and TARGETRECVDATASEGMENTLENGTH is absent from the min()-clamp list in iscsi_check_acceptor_state(), so the value the initiator declares is adopted verbatim (type range 512..16777215). The initiator effectively raises its own ceiling. - isert never clamps the negotiated value to its own fixed receive descriptor (ISER_RX_SIZE, 9216 bytes), so the target core's bound and the descriptor size are unrelated. The imm_data_len == data_len path is more than an over-read: it aliases the receive descriptor via sg_set_buf() and passes it to the backend as the data source for the SCSI WRITE, so an over-declared length causes heap contents past the descriptor to be written through the backend to the backing store. The backend is the victim of the oversized scatterlist isert hands it, not the cause; no read-back of the written bytes was demonstrated. Trigger: after login completes (full feature phase), an initiator that has declared a large TargetRecvDataSegmentLength and a FirstBurstLength that permits unsolicited/immediate data sends a PDU whose declared data-segment length exceeds what was received. With KASAN: BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 Read of size 4096 at addr ffff888109720800 by task kworker/1:0H/25 Workqueue: ib-comp-wq ib_cq_poll_work Call Trace: sg_copy_buffer+0x150/0x1c0 isert_recv_done+0xba6/0x2390 __ib_process_cq+0xe1/0x390 ib_cq_poll_work+0x46/0x150 isert_recv_done+0xba6 resolves to isert_handle_iscsi_dataout() (ib_isert.c:1160), inlined through isert_rx_opcode(). Validate wc->byte_len against the framing in isert_recv_done() before the PDU reaches any handler, and reinstate the connection if it is short. Because the test compares without subtracting the header length, it also rejects PDUs shorter than the iSER and iSCSI headers, which would otherwise be parsed out of stale descriptor contents. The login handler rejects PDUs shorter than ISER_HEADERS_LEN (commit 29e7b925ae6d ("IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN")) but does not bound the declared length either; that is fixed in the next patch. The data handlers had no length check at all. isert reads the data segment from a fixed offset: isert_get_data() returns the iSER header plus ISER_HEADERS_LEN and makes no adjustment for an AHS. The bytes the handlers touch are therefore exactly [ISER_HEADERS_LEN, ISER_HEADERS_LEN + dlength), and comparing that sum against wc->byte_len bounds precisely the region that is read. An AHS term would only make the test stricter without bounding anything further, and cannot cause a false reject: a PDU carrying an AHS is longer, not shorter. This is a memory-safety fix that verifies the bytes that were actually received; it does not touch RFC 7145 length negotiation and is not the MaxXmitDataSegmentLength negotiation redesign raised in the 2017 "[Query] iSER-Target: QP errors observed on increasing MaxXmitDataSegmentLength" discussion. That redesign is explicitly out of scope here. The patched kernel rejects the malformed DataOut PDU and both immediate-data variants with "PDU declares ... bytes were received" and continues to pass normal traffic with no regression. Reproduced with soft-RoCE (rdma_rxe) and a raw rdma_cm/ibv initiator; no kernel-side test hooks were needed. Fixes: b8d26b3be8b3 ("iser-target: Add iSCSI Extensions for RDMA (iSER) target driver") Signed-off-by: Yehyeong Lee <yhlee(a)isslab.korea.ac.kr> Link: https://patch.msgid.link/20260726163931.971063-2-yhlee@isslab.korea.ac.kr Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yao Yiqi <yaoyiqi3(a)huawei.com> --- drivers/infiniband/ulp/isert/ib_isert.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c index 9f8d6113efb4..29d79b51aa1f 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -1338,6 +1338,21 @@ isert_recv_done(struct ib_cq *cq, struct ib_wc *wc) ib_dma_sync_single_for_cpu(ib_dev, rx_desc->dma_addr, ISER_RX_SIZE, DMA_FROM_DEVICE); + /* + * The data segment length declared in the BHS is attacker controlled + * and is used further down to read that many bytes out of the fixed + * size receive descriptor, so it has to be checked against the number + * of bytes that were actually received. Comparing without subtracting + * also rejects PDUs shorter than the iSER and iSCSI headers, which + * would otherwise be parsed out of stale descriptor contents. + */ + if (unlikely(wc->byte_len < ISER_HEADERS_LEN + ntoh24(hdr->dlength))) { + isert_err("PDU declares %u data bytes but only %u bytes were received\n", + ntoh24(hdr->dlength), wc->byte_len); + iscsit_cause_connection_reinstatement(isert_conn->conn, 0); + return; + } + isert_dbg("DMA: 0x%llx, iSCSI opcode: 0x%02x, ITT: 0x%08x, flags: 0x%02x dlen: %d\n", rx_desc->dma_addr, hdr->opcode, hdr->itt, hdr->flags, (int)(wc->byte_len - ISER_HEADERS_LEN)); -- 2.34.1

2 1

[PATCH OLK-5.10 V1] Bluetooth: SCO: hold sk properly in sco_conn_ready
by Yao Yiqi 22 Sep '26

22 Sep '26

From: Pauli Virtanen <pav(a)iki.fi> stable inclusion from stable-v5.15.212 commit 50aae396dc30377bec8e3b181b8346f8fd38f7d8 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/19595 CVE: CVE-2026-89774 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 4e37f6452d586b95c346a9abdd2fb80b67794f39 upstream. sk deref in sco_conn_ready must be done either under conn->lock, or holding a refcount, to avoid concurrent close. conn->sk and parent sk is currently accessed without either, and without checking parent->sk_state: [Task 1] [Task 2] sco_sock_release sco_conn_ready sk = conn->sk lock_sock(sk) conn->sk = NULL lock_sock(sk) release_sock(sk) sco_sock_kill(sk) UAF on sk deref and similarly for access to sco_get_sock_listen() return value. Fix possible UAF by holding sk refcount in sco_conn_ready() and making sco_get_sock_listen() increase refcount. Also recheck after lock_sock that the socket is still valid. Adjust conn->sk locking so it's protected also by lock_sock() of the associated socket if any. Fixes: 27c24fda62b60 ("Bluetooth: switch to lock_sock in SCO") Signed-off-by: Pauli Virtanen <pav(a)iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Conflicts: net/bluetooth/sco.c [ Context conflicts ] Signed-off-by: Yao Yiqi <yaoyiqi3(a)huawei.com> --- net/bluetooth/sco.c | 42 ++++++++++++++++++++++++++++++------------ 1 file changed, 30 insertions(+), 12 deletions(-) diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index 5dbd7e6e1481..33480cc5e853 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -372,9 +372,13 @@ static struct sock *sco_get_sock_listen(bdaddr_t *src) sk1 = sk; } + sk = sk ? sk : sk1; + if (sk) + sock_hold(sk); + read_unlock(&sco_sk_list.lock); - return sk ? sk : sk1; + return sk; } static void sco_sock_destruct(struct sock *sk) @@ -1108,17 +1112,28 @@ static int sco_sock_release(struct socket *sock) static void sco_conn_ready(struct sco_conn *conn) { - struct sock *parent; - struct sock *sk = conn->sk; + struct sock *parent, *sk; + + sco_conn_lock(conn); + sk = sco_sock_hold(conn); + sco_conn_unlock(conn); BT_DBG("conn %p", conn); if (sk) { - sco_sock_clear_timer(sk); lock_sock(sk); - sk->sk_state = BT_CONNECTED; - sk->sk_state_change(sk); + + /* conn->sk may have become NULL if racing with sk close, but + * due to held hdev->lock, it can't become different sk. + */ + if (conn->sk) { + sco_sock_clear_timer(sk); + sk->sk_state = BT_CONNECTED; + sk->sk_state_change(sk); + } + release_sock(sk); + sock_put(sk); } else { sco_conn_lock(conn); @@ -1135,13 +1150,15 @@ static void sco_conn_ready(struct sco_conn *conn) lock_sock(parent); + /* hdev->lock guarantees conn->sk == NULL still here */ + + if (parent->sk_state != BT_LISTEN) + goto release; + sk = sco_sock_alloc(sock_net(parent), NULL, BTPROTO_SCO, GFP_ATOMIC, 0); - if (!sk) { - release_sock(parent); - sco_conn_unlock(conn); - return; - } + if (!sk) + goto release; sco_sock_init(sk, parent); @@ -1159,9 +1176,10 @@ static void sco_conn_ready(struct sco_conn *conn) /* Wake up parent */ parent->sk_data_ready(parent); +release: release_sock(parent); - sco_conn_unlock(conn); + sock_put(parent); } } -- 2.34.1

2 1

[PATCH OLK-6.6 v3 0/2] CVE-2026-90313
by Pu Lehui 22 Sep '26

22 Sep '26

Pu Lehui (1): bpf, cgroup: Fix invalid storage access after __cgroup_bpf_attach failed Yonghong Song (1): bpf: Allow pre-ordering for bpf cgroup progs include/linux/bpf-cgroup.h | 1 + include/uapi/linux/bpf.h | 1 + kernel/bpf/cgroup.c | 43 +++++++++++++++++++++++++++------- kernel/bpf/syscall.c | 3 ++- tools/include/uapi/linux/bpf.h | 1 + 5 files changed, 39 insertions(+), 10 deletions(-) -- 2.34.1

2 3

[PATCH OLK-6.6 0/3] backport devfreq uncore DVFS governor patches
by Lifeng Zheng 22 Sep '26

22 Sep '26

From: Hongye Lin <linhongye(a)h-partners.com> driver inclusion category: feature bugzilla: https://atomgit.com/openeuler/kernel/issues/9163 ---------------------------------------------------------------------- backport devfreq uncore DVFS governor patches from linux mainline on September 21th. Jie Zhan (2): perf/core: Add perf_pmu_type_by_parent_dev() for in-kernel PMU lookup devfreq: hisi-uncore: Add devfreq-event support via L3C PMU Jonathan Cameron (1): perf/hisi-uncore: Assign parents for event_source devices drivers/devfreq/Kconfig | 3 +- drivers/devfreq/hisi_uncore_freq.c | 423 ++++++++++++++++++++++- drivers/perf/hisilicon/hisi_uncore_pmu.c | 1 + include/linux/perf_event.h | 2 + kernel/events/core.c | 28 ++ 5 files changed, 453 insertions(+), 4 deletions(-) -- 2.33.0

2 4

[PATCH OLK-5.10] audit: avoid dropping live tree ref on fsnotify rule autoremove
by Yi Yang 22 Sep '26

22 Sep '26

From: Jérémy Jean <Jeremy.Jean(a)oss.cyber.gouv.fr> stable inclusion from stable-v5.10.270 commit 9cac21f8eb82675ed19fb955b8bbb9dd14cc3d58 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/18926 CVE: CVE-2026-89643 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 783f0f0974c156aca630f4ffff248671082a098d upstream. audit_del_rule() is used for both netlink deletion templates and internal fsnotify autoremove. The former passes a parsed template which owns a temporary tree reference; the latter passes the installed entry itself. The unconditional audit_put_tree() at the end of audit_del_rule() assumes the template case. For mixed AUDIT_DIR plus AUDIT_EXE rules, an fsnotify autoremove event therefore drops the installed rule's live tree reference. Repeating this across rules sharing the same tree can free the tree while another rule still references it, and a later autoremove dereferences the freed pathname while comparing rules. Move the temporary-tree put to audit_rule_change(), the caller that owns deletion templates. Keep it in the AUDIT_DEL_RULE cleanup so both successful deletion and -ENOENT still release the parser-owned tree. Cc: stable(a)kernel.org Fixes: 34d99af52ad4 ("audit: implement audit by executable") Assisted-by: Codex:gpt-5 Signed-off-by: Jérémy Jean <Jeremy.Jean(a)oss.cyber.gouv.fr> Reviewed-by: Ricardo Robaina <rrobaina(a)redhat.com> Tested-by: Ricardo Robaina <rrobaina(a)redhat.com> [PM: dropped unnecessary comment for line length reasons] Signed-off-by: Paul Moore <paul(a)paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- kernel/auditfilter.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index a5b43f25609e..decdc01351cb 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1014,7 +1014,6 @@ static inline int audit_add_rule(struct audit_entry *entry) int audit_del_rule(struct audit_entry *entry) { struct audit_entry *e; - struct audit_tree *tree = entry->rule.tree; struct list_head *list; int ret = 0; #ifdef CONFIG_AUDITSYSCALL @@ -1060,9 +1059,6 @@ int audit_del_rule(struct audit_entry *entry) out: mutex_unlock(&audit_filter_mutex); - if (tree) - audit_put_tree(tree); /* that's the temporary one */ - return ret; } @@ -1147,6 +1143,8 @@ int audit_rule_change(int type, int seq, void *data, size_t datasz) } if (err || type == AUDIT_DEL_RULE) { + if (type == AUDIT_DEL_RULE && entry->rule.tree) + audit_put_tree(entry->rule.tree); if (entry->rule.exe) audit_remove_mark(entry->rule.exe); audit_free_rule(entry); -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS] audit: avoid dropping live tree ref on fsnotify rule autoremove
by Yi Yang 21 Sep '26

21 Sep '26

From: Jérémy Jean <Jeremy.Jean(a)oss.cyber.gouv.fr> mainline inclusion from mainline-v7.3-rc1 commit 783f0f0974c156aca630f4ffff248671082a098d category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/18926 CVE: CVE-2026-89643 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- audit_del_rule() is used for both netlink deletion templates and internal fsnotify autoremove. The former passes a parsed template which owns a temporary tree reference; the latter passes the installed entry itself. The unconditional audit_put_tree() at the end of audit_del_rule() assumes the template case. For mixed AUDIT_DIR plus AUDIT_EXE rules, an fsnotify autoremove event therefore drops the installed rule's live tree reference. Repeating this across rules sharing the same tree can free the tree while another rule still references it, and a later autoremove dereferences the freed pathname while comparing rules. Move the temporary-tree put to audit_rule_change(), the caller that owns deletion templates. Keep it in the AUDIT_DEL_RULE cleanup so both successful deletion and -ENOENT still release the parser-owned tree. Cc: stable(a)kernel.org Fixes: 34d99af52ad4 ("audit: implement audit by executable") Assisted-by: Codex:gpt-5 Signed-off-by: Jérémy Jean <Jeremy.Jean(a)oss.cyber.gouv.fr> Reviewed-by: Ricardo Robaina <rrobaina(a)redhat.com> Tested-by: Ricardo Robaina <rrobaina(a)redhat.com> [PM: dropped unnecessary comment for line length reasons] Signed-off-by: Paul Moore <paul(a)paul-moore.com> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- kernel/auditfilter.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index b2cc63ca0068..93b0d459db59 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1009,7 +1009,6 @@ static inline int audit_add_rule(struct audit_entry *entry) int audit_del_rule(struct audit_entry *entry) { struct audit_entry *e; - struct audit_tree *tree = entry->rule.tree; struct list_head *list; int ret = 0; #ifdef CONFIG_AUDITSYSCALL @@ -1055,9 +1054,6 @@ int audit_del_rule(struct audit_entry *entry) out: mutex_unlock(&audit_filter_mutex); - if (tree) - audit_put_tree(tree); /* that's the temporary one */ - return ret; } @@ -1142,6 +1138,8 @@ int audit_rule_change(int type, int seq, void *data, size_t datasz) } if (err || type == AUDIT_DEL_RULE) { + if (type == AUDIT_DEL_RULE && entry->rule.tree) + audit_put_tree(entry->rule.tree); if (entry->rule.exe) audit_remove_mark(entry->rule.exe); audit_free_rule(entry); -- 2.25.1

2 1

[PATCH OLK-5.10] apparmor: fix out-of-bounds write when null terminating a label vec
by Yi Yang 21 Sep '26

21 Sep '26

From: Hyunwoo Kim <imv4bel(a)gmail.com> mainline inclusion from mainline-v7.3-rc1 commit 9f1e40193eef7f047e6b77cfb4b4cafdecd7a123 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/18781 CVE: CVE-2026-89761 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- aa_vec_unique() null terminates at vec[n - dups] when VEC_FLAG_TERMINATE is passed. If the components are all distinct no duplicates are dropped, dups is 0 and the terminator goes to vec[n], so the caller has to provide room for n + 1 entries. aa_label_strn_parse() sets up its vector with vec_setup(profile, vec, len, gfp) and then calls aa_vec_unique(vec, len, VEC_FLAG_TERMINATE), but vec_setup() does not reserve the terminator entry. Up to LOCAL_VEC_ENTRIES it uses the local array of LOCAL_VEC_ENTRIES pointers, above that it allocates exactly len pointers. The terminator therefore lands one entry past the end of the local array when len is LOCAL_VEC_ENTRIES, and one entry past the end of the allocation when len is larger. len comes from the number of "//&" separated components in the label name and label_count_strn_entries() does not bound it. An unprivileged task reaches the parse by writing to /proc/self/attr/apparmor/current or through lsm_set_self_attr(2), both of which go through do_setattr(), and the name is parsed before the change_profile permission is checked. The query_label() path behind the securityfs .access file, which is mode 0666, performs no permission check at all. Every component has to resolve to a loaded profile, so a system with policy loaded is required. The other two VEC_FLAG_TERMINATE users work on a label vec that aa_label_alloc() has already sized with "+ 1 for null terminator entry on vec". Reserve the same entry in vec_setup() and DEFINE_VEC(). Passing len + 1 from the caller instead would move len == LOCAL_VEC_ENTRIES out of the local array and into kzalloc(). Fixes: f1bd904175e8 ("apparmor: add the base fns() for domain labels") Cc: stable(a)vger.kernel.org Signed-off-by: Hyunwoo Kim <imv4bel(a)gmail.com> Signed-off-by: John Johansen <john.johansen(a)canonical.com> Conflicts: security/apparmor/include/label.h [Commit 9f1e40193eef uses kzalloc_objs() for the terminator-sized allocation; that helper does not exist in this tree, so use the equivalent kcalloc().] Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- security/apparmor/include/label.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/security/apparmor/include/label.h b/security/apparmor/include/label.h index 55986388dfae..ab223efadd83 100644 --- a/security/apparmor/include/label.h +++ b/security/apparmor/include/label.h @@ -22,7 +22,7 @@ struct aa_ns; #define LOCAL_VEC_ENTRIES 8 #define DEFINE_VEC(T, V) \ - struct aa_ ## T *(_ ## V ## _localtmp)[LOCAL_VEC_ENTRIES]; \ + struct aa_ ## T *(_ ## V ## _localtmp)[LOCAL_VEC_ENTRIES + 1]; \ struct aa_ ## T **(V) #define vec_setup(T, V, N, GFP) \ @@ -30,10 +30,10 @@ struct aa_ns; if ((N) <= LOCAL_VEC_ENTRIES) { \ typeof(N) i; \ (V) = (_ ## V ## _localtmp); \ - for (i = 0; i < (N); i++) \ + for (i = 0; i <= (N); i++) \ (V)[i] = NULL; \ } else \ - (V) = kzalloc(sizeof(struct aa_ ## T *) * (N), (GFP)); \ + (V) = kcalloc((N) + 1, sizeof(struct aa_ ## T *), (GFP));\ (V) ? 0 : -ENOMEM; \ }) -- 2.25.1

2 1