- Kernel - mailweb.openeuler.org

[PATCH openEuler-22.03-LTS-SP1 0/2] fix CVE-2024-36021 and CVE-2024-36900
by Ye Bin 05 Jun '24

05 Jun '24

Yonglong Liu (2): net: hns3: fix kernel crash when devlink reload during pf initialization net: hns3: fix kernel crash when devlink reload during initialization .../ethernet/hisilicon/hns3/hns3pf/hclge_devlink.c | 5 +++-- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 12 +++++------- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 10 ++++------ 3 files changed, 12 insertions(+), 15 deletions(-) -- 2.31.1

2 3

[PATCH OLK-5.10 0/1] Fix vf init and common user permissions issue
by Shuai Wu 05 Jun '24

05 Jun '24

Modify hrn3 dev file permissions to support common users use the RDMA API. Fixes: ae52f9c522dd ("infiniband/hw/hiroce3: Add Huawei Intelligent Network Card RDMA Driver") Shuai Wu (1): net/ethernet/huawei/hiroce3: Fix vf init and common user permissions issue drivers/infiniband/hw/hiroce3/roce.h | 2 +- drivers/infiniband/hw/hiroce3/roce_main.c | 2 +- drivers/net/ethernet/huawei/hinic3/hw/hinic3_pci_id_tbl.h | 1 + 3 files changed, 3 insertions(+), 2 deletions(-) -- 2.33.0

2 2

[PATCH openEuler-22.03-LTS-SP1] batman-adv: Avoid infinite loop trying to resize local TT
by Guo Mengqi 05 Jun '24

05 Jun '24

From: Sven Eckelmann <sven(a)narfation.org> stable inclusion from stable-v5.10.216 commit 70a8be9dc2fb65d67f8c1e0c88c587e08e2e575d category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I9QRL7 CVE: CVE-2024-35982 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit b1f532a3b1e6d2e5559c7ace49322922637a28aa upstream. If the MTU of one of an attached interface becomes too small to transmit the local translation table then it must be resized to fit inside all fragments (when enabled) or a single packet. But if the MTU becomes too low to transmit even the header + the VLAN specific part then the resizing of the local TT will never succeed. This can for example happen when the usable space is 110 bytes and 11 VLANs are on top of batman-adv. In this case, at least 116 byte would be needed. There will just be an endless spam of batman_adv: batadv0: Forced to purge local tt entries to fit new maximum fragment MTU (110) in the log but the function will never finish. Problem here is that the timeout will be halved all the time and will then stagnate at 0 and therefore never be able to reduce the table even more. There are other scenarios possible with a similar result. The number of BATADV_TT_CLIENT_NOPURGE entries in the local TT can for example be too high to fit inside a packet. Such a scenario can therefore happen also with only a single VLAN + 7 non-purgable addresses - requiring at least 120 bytes. While this should be handled proactively when: * interface with too low MTU is added * VLAN is added * non-purgeable local mac is added * MTU of an attached interface is reduced * fragmentation setting gets disabled (which most likely requires dropping attached interfaces) not all of these scenarios can be prevented because batman-adv is only consuming events without the the possibility to prevent these actions (non-purgable MAC address added, MTU of an attached interface is reduced). It is therefore necessary to also make sure that the code is able to handle also the situations when there were already incompatible system configuration are present. Cc: stable(a)vger.kernel.org Fixes: a19d3d85e1b8 ("batman-adv: limit local translation table max size") Reported-by: syzbot+a6a4b5bb3da165594cff(a)syzkaller.appspotmail.com Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Guo Mengqi <guomengqi3(a)huawei.com> --- net/batman-adv/translation-table.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 5f990a206107..27ac87afdba1 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -4189,7 +4189,7 @@ void batadv_tt_local_resize_to_mtu(struct net_device *soft_iface) spin_lock_bh(&bat_priv->tt.commit_lock); - while (true) { + while (timeout) { table_size = batadv_tt_local_table_transmit_size(bat_priv); if (packet_size_max >= table_size) break; -- 2.17.1

2 1

[PATCH OLK-5.10 0/3] CVE-2024-35879
by Zhang Zekun 05 Jun '24

05 Jun '24

Fix CVE-2024-35879 Herve Codina (2): driver core: Introduce device_link_wait_removal() of: dynamic: Synchronize of_changeset_destroy() with the devlink removals Zhang Zekun (1): driver core: Fix kabi broken drivers/base/core.c | 26 +++++++++++++++++++++++--- drivers/of/dynamic.c | 11 +++++++++++ include/linux/device.h | 1 + include/linux/of.h | 2 ++ 4 files changed, 37 insertions(+), 3 deletions(-) -- 2.17.1

2 4

[PATCH OLK-5.10] Bluetooth: L2CAP: Fix not validating setsockopt user input
by Kaixiong Yu 05 Jun '24

05 Jun '24

From: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> stable inclusion from stable-v6.8.7 commit 8ee0c132a61df9723813c40e742dc5321824daa9 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I9QRQE CVE: CVE-2024-35965 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 4f3951242ace5efc7131932e2e01e6ac6baed846 ] Check user input length before copying data. Fixes: 33575df7be67 ("Bluetooth: move l2cap_sock_setsockopt() to l2cap_sock.c") Fixes: 3ee7b7cd8390 ("Bluetooth: Add BT_MODE socket option") Signed-off-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Conflicts: net/bluetooth/l2cap_sock.c [The conflict occurs because the commit 54db3630deff566224de6cfb0767d2d398e68ed5 ("Bluetooth: Remove BT_HS"), which is from stable inclusion-v6.8.2, is not merged] Signed-off-by: Kaixiong Yu <yukaixiong(a)huawei.com> --- include/net/bluetooth/bluetooth.h | 9 ++++++ net/bluetooth/l2cap_sock.c | 54 ++++++++++++------------------- 2 files changed, 30 insertions(+), 33 deletions(-) diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index 355835639ae5..18945f650ce4 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -487,6 +487,15 @@ static inline struct sk_buff *bt_skb_sendmmsg(struct sock *sk, return skb; } +static inline int bt_copy_from_sockptr(void *dst, size_t dst_size, + sockptr_t src, size_t src_size) +{ + if (dst_size > src_size) + return -EINVAL; + + return copy_from_sockptr(dst, src, dst_size); +} + int bt_to_errno(u16 code); void hci_sock_set_flag(struct sock *sk, int nr); diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index 756523e5402a..13afdc599b58 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -744,7 +744,7 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, struct sock *sk = sock->sk; struct l2cap_chan *chan = l2cap_pi(sk)->chan; struct l2cap_options opts; - int len, err = 0; + int err = 0; u32 opt; BT_DBG("sk %p", sk); @@ -771,11 +771,9 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, opts.max_tx = chan->max_tx; opts.txwin_size = chan->tx_win; - len = min_t(unsigned int, sizeof(opts), optlen); - if (copy_from_sockptr(&opts, optval, len)) { - err = -EFAULT; + err = bt_copy_from_sockptr(&opts, sizeof(opts), optval, optlen); + if (err) break; - } if (opts.txwin_size > L2CAP_DEFAULT_EXT_WINDOW) { err = -EINVAL; @@ -818,10 +816,9 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, break; case L2CAP_LM: - if (copy_from_sockptr(&opt, optval, sizeof(u32))) { - err = -EFAULT; + err = bt_copy_from_sockptr(&opt, sizeof(opt), optval, optlen); + if (err) break; - } if (opt & L2CAP_LM_FIPS) { err = -EINVAL; @@ -902,7 +899,7 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, struct bt_security sec; struct bt_power pwr; struct l2cap_conn *conn; - int len, err = 0; + int err = 0; u32 opt; u16 mtu; u8 mode; @@ -928,11 +925,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, sec.level = BT_SECURITY_LOW; - len = min_t(unsigned int, sizeof(sec), optlen); - if (copy_from_sockptr(&sec, optval, len)) { - err = -EFAULT; + err = bt_copy_from_sockptr(&sec, sizeof(sec), optval, optlen); + if (err) break; - } if (sec.level < BT_SECURITY_LOW || sec.level > BT_SECURITY_FIPS) { @@ -977,10 +972,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, break; } - if (copy_from_sockptr(&opt, optval, sizeof(u32))) { - err = -EFAULT; + err = bt_copy_from_sockptr(&opt, sizeof(opt), optval, optlen); + if (err) break; - } if (opt) { set_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags); @@ -992,10 +986,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, break; case BT_FLUSHABLE: - if (copy_from_sockptr(&opt, optval, sizeof(u32))) { - err = -EFAULT; + err = bt_copy_from_sockptr(&opt, sizeof(opt), optval, optlen); + if (err) break; - } if (opt > BT_FLUSHABLE_ON) { err = -EINVAL; @@ -1027,11 +1020,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, pwr.force_active = BT_POWER_FORCE_ACTIVE_ON; - len = min_t(unsigned int, sizeof(pwr), optlen); - if (copy_from_sockptr(&pwr, optval, len)) { - err = -EFAULT; + err = bt_copy_from_sockptr(&pwr, sizeof(pwr), optval, optlen); + if (err) break; - } if (pwr.force_active) set_bit(FLAG_FORCE_ACTIVE, &chan->flags); @@ -1040,10 +1031,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, break; case BT_CHANNEL_POLICY: - if (copy_from_sockptr(&opt, optval, sizeof(u32))) { - err = -EFAULT; - break; - } + err = bt_copy_from_sockptr(&opt, sizeof(opt), optval, optlen); + if (err) + break; if (opt > BT_CHANNEL_POLICY_AMP_PREFERRED) { err = -EINVAL; @@ -1088,10 +1078,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, break; } - if (copy_from_sockptr(&mtu, optval, sizeof(u16))) { - err = -EFAULT; + err = bt_copy_from_sockptr(&mtu, sizeof(mtu), optval, optlen); + if (err) break; - } if (chan->mode == L2CAP_MODE_EXT_FLOWCTL && sk->sk_state == BT_CONNECTED) @@ -1119,10 +1108,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, break; } - if (copy_from_sockptr(&mode, optval, sizeof(u8))) { - err = -EFAULT; + err = bt_copy_from_sockptr(&mode, sizeof(mode), optval, optlen); + if (err) break; - } BT_DBG("mode %u", mode); -- 2.25.1

2 1

[PATCH OLK-5.10 v9 00/11] Memory access profiler(SPE) driven NUMA balancing
by Ze Zuo 05 Jun '24

05 Jun '24

Hi, In Arm processors, there is a hardware PMU (Performance Monitoring Unit) facility called Statistical Profiling Extension (SPE) that can gather memory access metrics. In this patchset, SPE is exploited as an access information sampling approach to drive NUMA balancing. This sampling approach is introducedto replace the method based on address space scanning and hint faults with the access information provided by the hardware. With this, it is no longer necessary for NUMA balancing to scan over the address space periodically and rely on task-to-page association built by NUMA hint faults. Instead, the access samples obtained from hardware PMU are fed to NUMA balancing as equivalents to page fault. Except for the replaced sampling approach, the rest of the NUMA balancing policy is retained to do pages and tasks migrations according to the samples. Profiling based on SPE is an valid alternative sampling approach in NUMA balancing for the optimal page and task placement. This can be also extended to other architectures as long as there is a hardware PMU that supports memory access profiling. An abstract layer mem_sampling is introduced to reserve support for other kernel features and different types of hardware PMU. To help evaluate performance of this approach in system, syctl interfaces are added to enable/disable hardware mem sampling. NUMA balancing sampling approach can be also switched back to hint-faults- based approach dynamically. TODOs Currently, SPE for NUMA balance does not support PMD-level page migration, but it will be supported in later version. Change since v8: -- add mem_sampling to file and directory name in patch 10. -- some clean code on patch 2. Changes since v7: -- rename CONFIG_ARM_SPE to CONFIG_ARM_SPE_MEM_SAMPLING. -- clean code on patch 8. Changes since v6: -- clean code on spe.c, arm_spe_pmu.c. Changes since v5: -- Modify perf and mem_sampling compatibility logic. -- Introduce cmdline mem_sampling_on to use mem_sampling. Changes since v4: -- some patch check warning fixs, no functional change. Changes since v3: -- some clean code, no functional change. Changes since v2: -- clean code and commit fixs, no functional change. Changes since v1: -- clean code, no functional change. Ze Zuo (11): drivers/arm/spe: In-kernel SPE driver for page access profiling mm: Add PMU based memory sampling abstract layer mm/mem_sampling.c: Add controlling interface for mem_sampling sched: Enable per-process mem_sampling from sched switch path mm/mem_sampling.c: Drive NUMA balancing via mem_sampling access data mm/mem_sampling.c: Add controlling interface for mem_sampling on numa balance tracing, numa balance: add trace events for numa data caused by mem_sampling driver/arm/spe: making mem_sampling and perf mutually exclusive with spe driver tracing, mem-sampling-sample: Adding tracking events to hardware-sampled page access samples/bpf: Add program for memory access by spe config: Enable memory sampling based pmu for numa balance by default arch/arm64/configs/openeuler_defconfig | 3 + drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/arm/Kconfig | 2 + drivers/arm/spe/Kconfig | 10 + drivers/arm/spe/Makefile | 2 + drivers/arm/spe/spe-decoder/Makefile | 2 + drivers/arm/spe/spe-decoder/arm-spe-decoder.c | 213 +++++ drivers/arm/spe/spe-decoder/arm-spe-decoder.h | 74 ++ .../arm/spe/spe-decoder/arm-spe-pkt-decoder.c | 227 +++++ .../arm/spe/spe-decoder/arm-spe-pkt-decoder.h | 153 ++++ drivers/arm/spe/spe.c | 805 ++++++++++++++++++ drivers/arm/spe/spe.h | 120 +++ drivers/perf/arm_pmu_acpi.c | 2 +- drivers/perf/arm_spe_pmu.c | 6 + include/linux/mem_sampling.h | 108 +++ include/trace/events/kmem.h | 80 ++ kernel/sched/core.c | 2 + kernel/sched/fair.c | 11 + mm/Kconfig | 24 + mm/Makefile | 1 + mm/mem_sampling.c | 468 ++++++++++ samples/bpf/mem_sampling/Makefile | 25 + samples/bpf/mem_sampling/Makefile.arch | 45 + samples/bpf/mem_sampling/README.md | 0 .../spe-mem-sampling-record.bpf.c | 38 + .../mem_sampling/spe-mem-sampling-record.h | 47 + .../spe-mem-sampling-record.user.c | 116 +++ 28 files changed, 2586 insertions(+), 1 deletion(-) create mode 100644 drivers/arm/Kconfig create mode 100644 drivers/arm/spe/Kconfig create mode 100644 drivers/arm/spe/Makefile create mode 100644 drivers/arm/spe/spe-decoder/Makefile create mode 100644 drivers/arm/spe/spe-decoder/arm-spe-decoder.c create mode 100644 drivers/arm/spe/spe-decoder/arm-spe-decoder.h create mode 100644 drivers/arm/spe/spe-decoder/arm-spe-pkt-decoder.c create mode 100644 drivers/arm/spe/spe-decoder/arm-spe-pkt-decoder.h create mode 100644 drivers/arm/spe/spe.c create mode 100644 drivers/arm/spe/spe.h create mode 100644 include/linux/mem_sampling.h create mode 100644 mm/mem_sampling.c create mode 100644 samples/bpf/mem_sampling/Makefile create mode 100644 samples/bpf/mem_sampling/Makefile.arch create mode 100644 samples/bpf/mem_sampling/README.md create mode 100644 samples/bpf/mem_sampling/spe-mem-sampling-record.bpf.c create mode 100644 samples/bpf/mem_sampling/spe-mem-sampling-record.h create mode 100644 samples/bpf/mem_sampling/spe-mem-sampling-record.user.c -- 2.33.0

2 12

[PATCH OLK-5.10] Bluetooth: L2CAP: Fix not validating setsockopt user input
by Kaixiong Yu 05 Jun '24

05 Jun '24

From: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> stable inclusion from stable-v6.8.7 commit 8ee0c132a61df9723813c40e742dc5321824daa9 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I9QRQE CVE：CVE-2024-35965 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 4f3951242ace5efc7131932e2e01e6ac6baed846 ] Check user input length before copying data. Fixes: 33575df7be67 ("Bluetooth: move l2cap_sock_setsockopt() to l2cap_sock.c") Fixes: 3ee7b7cd8390 ("Bluetooth: Add BT_MODE socket option") Signed-off-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Conflicts: net/bluetooth/l2cap_sock.c [The conflict occurs because the commit 54db3630deff566224de6cfb0767d2d398e68ed5 ("Bluetooth: Remove BT_HS"), which is from stable inclusion-v6.8.2, is not merged] Signed-off-by: Kaixiong Yu <yukaixiong(a)huawei.com> --- include/net/bluetooth/bluetooth.h | 9 ++++++ net/bluetooth/l2cap_sock.c | 54 ++++++++++++------------------- 2 files changed, 30 insertions(+), 33 deletions(-) diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index 355835639ae5..18945f650ce4 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -487,6 +487,15 @@ static inline struct sk_buff *bt_skb_sendmmsg(struct sock *sk, return skb; } +static inline int bt_copy_from_sockptr(void *dst, size_t dst_size, + sockptr_t src, size_t src_size) +{ + if (dst_size > src_size) + return -EINVAL; + + return copy_from_sockptr(dst, src, dst_size); +} + int bt_to_errno(u16 code); void hci_sock_set_flag(struct sock *sk, int nr); diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index 756523e5402a..13afdc599b58 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -744,7 +744,7 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, struct sock *sk = sock->sk; struct l2cap_chan *chan = l2cap_pi(sk)->chan; struct l2cap_options opts; - int len, err = 0; + int err = 0; u32 opt; BT_DBG("sk %p", sk); @@ -771,11 +771,9 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, opts.max_tx = chan->max_tx; opts.txwin_size = chan->tx_win; - len = min_t(unsigned int, sizeof(opts), optlen); - if (copy_from_sockptr(&opts, optval, len)) { - err = -EFAULT; + err = bt_copy_from_sockptr(&opts, sizeof(opts), optval, optlen); + if (err) break; - } if (opts.txwin_size > L2CAP_DEFAULT_EXT_WINDOW) { err = -EINVAL; @@ -818,10 +816,9 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, break; case L2CAP_LM: - if (copy_from_sockptr(&opt, optval, sizeof(u32))) { - err = -EFAULT; + err = bt_copy_from_sockptr(&opt, sizeof(opt), optval, optlen); + if (err) break; - } if (opt & L2CAP_LM_FIPS) { err = -EINVAL; @@ -902,7 +899,7 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, struct bt_security sec; struct bt_power pwr; struct l2cap_conn *conn; - int len, err = 0; + int err = 0; u32 opt; u16 mtu; u8 mode; @@ -928,11 +925,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, sec.level = BT_SECURITY_LOW; - len = min_t(unsigned int, sizeof(sec), optlen); - if (copy_from_sockptr(&sec, optval, len)) { - err = -EFAULT; + err = bt_copy_from_sockptr(&sec, sizeof(sec), optval, optlen); + if (err) break; - } if (sec.level < BT_SECURITY_LOW || sec.level > BT_SECURITY_FIPS) { @@ -977,10 +972,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, break; } - if (copy_from_sockptr(&opt, optval, sizeof(u32))) { - err = -EFAULT; + err = bt_copy_from_sockptr(&opt, sizeof(opt), optval, optlen); + if (err) break; - } if (opt) { set_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags); @@ -992,10 +986,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, break; case BT_FLUSHABLE: - if (copy_from_sockptr(&opt, optval, sizeof(u32))) { - err = -EFAULT; + err = bt_copy_from_sockptr(&opt, sizeof(opt), optval, optlen); + if (err) break; - } if (opt > BT_FLUSHABLE_ON) { err = -EINVAL; @@ -1027,11 +1020,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, pwr.force_active = BT_POWER_FORCE_ACTIVE_ON; - len = min_t(unsigned int, sizeof(pwr), optlen); - if (copy_from_sockptr(&pwr, optval, len)) { - err = -EFAULT; + err = bt_copy_from_sockptr(&pwr, sizeof(pwr), optval, optlen); + if (err) break; - } if (pwr.force_active) set_bit(FLAG_FORCE_ACTIVE, &chan->flags); @@ -1040,10 +1031,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, break; case BT_CHANNEL_POLICY: - if (copy_from_sockptr(&opt, optval, sizeof(u32))) { - err = -EFAULT; - break; - } + err = bt_copy_from_sockptr(&opt, sizeof(opt), optval, optlen); + if (err) + break; if (opt > BT_CHANNEL_POLICY_AMP_PREFERRED) { err = -EINVAL; @@ -1088,10 +1078,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, break; } - if (copy_from_sockptr(&mtu, optval, sizeof(u16))) { - err = -EFAULT; + err = bt_copy_from_sockptr(&mtu, sizeof(mtu), optval, optlen); + if (err) break; - } if (chan->mode == L2CAP_MODE_EXT_FLOWCTL && sk->sk_state == BT_CONNECTED) @@ -1119,10 +1108,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, break; } - if (copy_from_sockptr(&mode, optval, sizeof(u8))) { - err = -EFAULT; + err = bt_copy_from_sockptr(&mode, sizeof(mode), optval, optlen); + if (err) break; - } BT_DBG("mode %u", mode); -- 2.25.1

2 1

[PATCH openEuler-22.03-LTS-SP1] Bluetooth: L2CAP: Fix not validating setsockopt user input
by Kaixiong Yu 05 Jun '24

05 Jun '24

From: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> stable inclusion from stable-v6.8.7 commit 8ee0c132a61df9723813c40e742dc5321824daa9 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I9QRQE CVE: CVE-2024-35965 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 4f3951242ace5efc7131932e2e01e6ac6baed846 ] Check user input length before copying data. Fixes: 33575df7be67 ("Bluetooth: move l2cap_sock_setsockopt() to l2cap_sock.c") Fixes: 3ee7b7cd8390 ("Bluetooth: Add BT_MODE socket option") Signed-off-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Conflicts: net/bluetooth/l2cap_sock.c [The conflict occurs because the commit 54db3630deff566224de6cfb0767d2d398e68ed5 ("Bluetooth: Remove BT_HS"), which is from stable inclusion-v6.8.2, is not merged] Signed-off-by: Kaixiong Yu <yukaixiong(a)huawei.com> --- include/net/bluetooth/bluetooth.h | 9 ++++++ net/bluetooth/l2cap_sock.c | 54 ++++++++++++------------------- 2 files changed, 30 insertions(+), 33 deletions(-) diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index 355835639ae5..18945f650ce4 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -487,6 +487,15 @@ static inline struct sk_buff *bt_skb_sendmmsg(struct sock *sk, return skb; } +static inline int bt_copy_from_sockptr(void *dst, size_t dst_size, + sockptr_t src, size_t src_size) +{ + if (dst_size > src_size) + return -EINVAL; + + return copy_from_sockptr(dst, src, dst_size); +} + int bt_to_errno(u16 code); void hci_sock_set_flag(struct sock *sk, int nr); diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index 63bfbb5918fe..f739223d3af8 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -744,7 +744,7 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, struct sock *sk = sock->sk; struct l2cap_chan *chan = l2cap_pi(sk)->chan; struct l2cap_options opts; - int len, err = 0; + int err = 0; u32 opt; BT_DBG("sk %p", sk); @@ -771,11 +771,9 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, opts.max_tx = chan->max_tx; opts.txwin_size = chan->tx_win; - len = min_t(unsigned int, sizeof(opts), optlen); - if (copy_from_sockptr(&opts, optval, len)) { - err = -EFAULT; + err = bt_copy_from_sockptr(&opts, sizeof(opts), optval, optlen); + if (err) break; - } if (opts.txwin_size > L2CAP_DEFAULT_EXT_WINDOW) { err = -EINVAL; @@ -818,10 +816,9 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, break; case L2CAP_LM: - if (copy_from_sockptr(&opt, optval, sizeof(u32))) { - err = -EFAULT; + err = bt_copy_from_sockptr(&opt, sizeof(opt), optval, optlen); + if (err) break; - } if (opt & L2CAP_LM_FIPS) { err = -EINVAL; @@ -902,7 +899,7 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, struct bt_security sec; struct bt_power pwr; struct l2cap_conn *conn; - int len, err = 0; + int err = 0; u32 opt; u16 mtu; u8 mode; @@ -928,11 +925,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, sec.level = BT_SECURITY_LOW; - len = min_t(unsigned int, sizeof(sec), optlen); - if (copy_from_sockptr(&sec, optval, len)) { - err = -EFAULT; + err = bt_copy_from_sockptr(&sec, sizeof(sec), optval, optlen); + if (err) break; - } if (sec.level < BT_SECURITY_LOW || sec.level > BT_SECURITY_FIPS) { @@ -977,10 +972,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, break; } - if (copy_from_sockptr(&opt, optval, sizeof(u32))) { - err = -EFAULT; + err = bt_copy_from_sockptr(&opt, sizeof(opt), optval, optlen); + if (err) break; - } if (opt) { set_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags); @@ -992,10 +986,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, break; case BT_FLUSHABLE: - if (copy_from_sockptr(&opt, optval, sizeof(u32))) { - err = -EFAULT; + err = bt_copy_from_sockptr(&opt, sizeof(opt), optval, optlen); + if (err) break; - } if (opt > BT_FLUSHABLE_ON) { err = -EINVAL; @@ -1027,11 +1020,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, pwr.force_active = BT_POWER_FORCE_ACTIVE_ON; - len = min_t(unsigned int, sizeof(pwr), optlen); - if (copy_from_sockptr(&pwr, optval, len)) { - err = -EFAULT; + err = bt_copy_from_sockptr(&pwr, sizeof(pwr), optval, optlen); + if (err) break; - } if (pwr.force_active) set_bit(FLAG_FORCE_ACTIVE, &chan->flags); @@ -1040,10 +1031,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, break; case BT_CHANNEL_POLICY: - if (copy_from_sockptr(&opt, optval, sizeof(u32))) { - err = -EFAULT; - break; - } + err = bt_copy_from_sockptr(&opt, sizeof(opt), optval, optlen); + if (err) + break; if (opt > BT_CHANNEL_POLICY_AMP_PREFERRED) { err = -EINVAL; @@ -1088,10 +1078,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, break; } - if (copy_from_sockptr(&mtu, optval, sizeof(u16))) { - err = -EFAULT; + err = bt_copy_from_sockptr(&mtu, sizeof(mtu), optval, optlen); + if (err) break; - } if (chan->mode == L2CAP_MODE_EXT_FLOWCTL && sk->sk_state == BT_CONNECTED) @@ -1119,10 +1108,9 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, break; } - if (copy_from_sockptr(&mode, optval, sizeof(u8))) { - err = -EFAULT; + err = bt_copy_from_sockptr(&mode, sizeof(mode), optval, optlen); + if (err) break; - } BT_DBG("mode %u", mode); -- 2.25.1

2 1

[PATCH OLK-5.10] s390/qeth: Fix kernel panic after setting hsuid
by Xiongfeng Wang 05 Jun '24

05 Jun '24

From: Alexandra Winter <wintera(a)linux.ibm.com> mainline inclusion from mainline-v6.9-rc7 commit 8a2e4d37afb8500b276e5ee903dee06f50ab0494 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I9TMCO CVE: CVE-2024-36928 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Symptom: When the hsuid attribute is set for the first time on an IQD Layer3 device while the corresponding network interface is already UP, the kernel will try to execute a napi function pointer that is NULL. Example: --------------------------------------------------------------------------- [ 2057.572696] illegal operation: 0001 ilc:1 [#1] SMP [ 2057.572702] Modules linked in: af_iucv qeth_l3 zfcp scsi_transport_fc sunrpc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_tables_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink ghash_s390 prng xts aes_s390 des_s390 de s_generic sha3_512_s390 sha3_256_s390 sha512_s390 vfio_ccw vfio_mdev mdev vfio_iommu_type1 eadm_sch vfio ext4 mbcache jbd2 qeth_l2 bridge stp llc dasd_eckd_mod qeth dasd_mod qdio ccwgroup pkey zcrypt [ 2057.572739] CPU: 6 PID: 60182 Comm: stress_client Kdump: loaded Not tainted 4.18.0-541.el8.s390x #1 [ 2057.572742] Hardware name: IBM 3931 A01 704 (LPAR) [ 2057.572744] Krnl PSW : 0704f00180000000 0000000000000002 (0x2) [ 2057.572748] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3 [ 2057.572751] Krnl GPRS: 0000000000000004 0000000000000000 00000000a3b008d8 0000000000000000 [ 2057.572754] 00000000a3b008d8 cb923a29c779abc5 0000000000000000 00000000814cfd80 [ 2057.572756] 000000000000012c 0000000000000000 00000000a3b008d8 00000000a3b008d8 [ 2057.572758] 00000000bab6d500 00000000814cfd80 0000000091317e46 00000000814cfc68 [ 2057.572762] Krnl Code:#0000000000000000: 0000 illegal >0000000000000002: 0000 illegal 0000000000000004: 0000 illegal 0000000000000006: 0000 illegal 0000000000000008: 0000 illegal 000000000000000a: 0000 illegal 000000000000000c: 0000 illegal 000000000000000e: 0000 illegal [ 2057.572800] Call Trace: [ 2057.572801] ([<00000000ec639700>] 0xec639700) [ 2057.572803] [<00000000913183e2>] net_rx_action+0x2ba/0x398 [ 2057.572809] [<0000000091515f76>] __do_softirq+0x11e/0x3a0 [ 2057.572813] [<0000000090ce160c>] do_softirq_own_stack+0x3c/0x58 [ 2057.572817] ([<0000000090d2cbd6>] do_softirq.part.1+0x56/0x60) [ 2057.572822] [<0000000090d2cc60>] __local_bh_enable_ip+0x80/0x98 [ 2057.572825] [<0000000091314706>] __dev_queue_xmit+0x2be/0xd70 [ 2057.572827] [<000003ff803dd6d6>] afiucv_hs_send+0x24e/0x300 [af_iucv] [ 2057.572830] [<000003ff803dd88a>] iucv_send_ctrl+0x102/0x138 [af_iucv] [ 2057.572833] [<000003ff803de72a>] iucv_sock_connect+0x37a/0x468 [af_iucv] [ 2057.572835] [<00000000912e7e90>] __sys_connect+0xa0/0xd8 [ 2057.572839] [<00000000912e9580>] sys_socketcall+0x228/0x348 [ 2057.572841] [<0000000091514e1a>] system_call+0x2a6/0x2c8 [ 2057.572843] Last Breaking-Event-Address: [ 2057.572844] [<0000000091317e44>] __napi_poll+0x4c/0x1d8 [ 2057.572846] [ 2057.572847] Kernel panic - not syncing: Fatal exception in interrupt ------------------------------------------------------------------------------------------- Analysis: There is one napi structure per out_q: card->qdio.out_qs[i].napi The napi.poll functions are set during qeth_open(). Since commit 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)") qeth_set_offline()/qeth_set_online() no longer call dev_close()/ dev_open(). So if qeth_free_qdio_queues() cleared card->qdio.out_qs[i].napi.poll while the network interface was UP and the card was offline, they are not set again. Reproduction: chzdev -e $devno layer2=0 ip link set dev $network_interface up echo 0 > /sys/bus/ccwgroup/devices/0.0.$devno/online echo foo > /sys/bus/ccwgroup/devices/0.0.$devno/hsuid echo 1 > /sys/bus/ccwgroup/devices/0.0.$devno/online -> Crash (can be enforced e.g. by af_iucv connect(), ip link down/up, ...) Note that a Completion Queue (CQ) is only enabled or disabled, when hsuid is set for the first time or when it is removed. Workarounds: - Set hsuid before setting the device online for the first time or - Use chzdev -d $devno; chzdev $devno hsuid=xxx; chzdev -e $devno; to set hsuid on an existing device. (this will remove and recreate the network interface) Fix: There is no need to free the output queues when a completion queue is added or removed. card->qdio.state now indicates whether the inbound buffer pool and the outbound queues are allocated. card->qdio.c_q indicates whether a CQ is allocated. Fixes: 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)") Signed-off-by: Alexandra Winter <wintera(a)linux.ibm.com> Reviewed-by: Simon Horman <horms(a)kernel.org> Link: https://lore.kernel.org/r/20240430091004.2265683-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni(a)redhat.com> Conflicts: drivers/s390/net/qeth_core_main.c [wangxiongfeng: context conflicts in qeth_free_cq() because following two commit is not merged. dc15012bb083 "s390/qeth: don't keep track of Input Queue count". 396c100472dd "s390/qdio: let driver manage the QAOB".] Signed-off-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> --- drivers/s390/net/qeth_core_main.c | 66 ++++++++++++++----------------- 1 file changed, 29 insertions(+), 37 deletions(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 73d564906d04..6f76dee0e601 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -384,6 +384,17 @@ static int qeth_cq_init(struct qeth_card *card) return rc; } +static void qeth_free_cq(struct qeth_card *card) +{ + if (card->qdio.c_q) { + --card->qdio.no_in_queues; + qeth_free_qdio_queue(card->qdio.c_q); + card->qdio.c_q = NULL; + } + kfree(card->qdio.out_bufstates); + card->qdio.out_bufstates = NULL; +} + static int qeth_alloc_cq(struct qeth_card *card) { int rc; @@ -393,10 +404,12 @@ static int qeth_alloc_cq(struct qeth_card *card) struct qdio_outbuf_state *outbuf_states; QETH_CARD_TEXT(card, 2, "cqon"); - card->qdio.c_q = qeth_alloc_qdio_queue(); if (!card->qdio.c_q) { - rc = -1; - goto kmsg_out; + card->qdio.c_q = qeth_alloc_qdio_queue(); + if (!card->qdio.c_q) { + rc = -1; + goto kmsg_out; + } } card->qdio.no_in_queues = 2; card->qdio.out_bufstates = @@ -415,7 +428,7 @@ static int qeth_alloc_cq(struct qeth_card *card) } } else { QETH_CARD_TEXT(card, 2, "nocq"); - card->qdio.c_q = NULL; + qeth_free_cq(card); card->qdio.no_in_queues = 1; } QETH_CARD_TEXT_(card, 2, "iqc%d", card->qdio.no_in_queues); @@ -430,17 +443,6 @@ static int qeth_alloc_cq(struct qeth_card *card) goto out; } -static void qeth_free_cq(struct qeth_card *card) -{ - if (card->qdio.c_q) { - --card->qdio.no_in_queues; - qeth_free_qdio_queue(card->qdio.c_q); - card->qdio.c_q = NULL; - } - kfree(card->qdio.out_bufstates); - card->qdio.out_bufstates = NULL; -} - static enum iucv_tx_notify qeth_compute_cq_notification(int sbalf15, int delayed) { @@ -2657,6 +2659,10 @@ static int qeth_alloc_qdio_queues(struct qeth_card *card) QETH_CARD_TEXT(card, 2, "allcqdbf"); + /* completion */ + if (qeth_alloc_cq(card)) + goto out_err; + if (atomic_cmpxchg(&card->qdio.state, QETH_QDIO_UNINITIALIZED, QETH_QDIO_ALLOCATED) != QETH_QDIO_UNINITIALIZED) return 0; @@ -2690,10 +2696,6 @@ static int qeth_alloc_qdio_queues(struct qeth_card *card) queue->priority = QETH_QIB_PQUE_PRIO_DEFAULT; } - /* completion */ - if (qeth_alloc_cq(card)) - goto out_freeoutq; - return 0; out_freeoutq: @@ -2707,6 +2709,8 @@ static int qeth_alloc_qdio_queues(struct qeth_card *card) card->qdio.in_q = NULL; out_nomem: atomic_set(&card->qdio.state, QETH_QDIO_UNINITIALIZED); + qeth_free_cq(card); +out_err: return -ENOMEM; } @@ -2714,11 +2718,12 @@ static void qeth_free_qdio_queues(struct qeth_card *card) { int i, j; + qeth_free_cq(card); + if (atomic_xchg(&card->qdio.state, QETH_QDIO_UNINITIALIZED) == QETH_QDIO_UNINITIALIZED) return; - qeth_free_cq(card); for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; ++j) { if (card->qdio.in_q->bufs[j].rx_skb) dev_kfree_skb_any(card->qdio.in_q->bufs[j].rx_skb); @@ -3758,24 +3763,11 @@ static void qeth_qdio_poll(struct ccw_device *cdev, unsigned long card_ptr) int qeth_configure_cq(struct qeth_card *card, enum qeth_cq cq) { - int rc; - - if (card->options.cq == QETH_CQ_NOTAVAILABLE) { - rc = -1; - goto out; - } else { - if (card->options.cq == cq) { - rc = 0; - goto out; - } - - qeth_free_qdio_queues(card); - card->options.cq = cq; - rc = 0; - } -out: - return rc; + if (card->options.cq == QETH_CQ_NOTAVAILABLE) + return -1; + card->options.cq = cq; + return 0; } EXPORT_SYMBOL_GPL(qeth_configure_cq); -- 2.20.1

2 1

[PATCH openEuler-1.0-LTS] can: pch_can: pch_can_rx_normal: fix use after free
by Luo Gengkun 05 Jun '24

05 Jun '24

mainline inclusion from mainline-v5.16-rc5 commit 94cddf1e9227a171b27292509d59691819c458db category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I9S211 CVE: CVE-2021-47520 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- After calling netif_receive_skb(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is dereferenced just after the call netif_receive_skb(skb). Reordering the lines solves the issue. Fixes: b21d18b51b31 ("can: Topcliff: Add PCH_CAN driver.") Link: https://lore.kernel.org/all/20211123111654.621610-1-mailhol.vincent@wanadoo… Cc: stable(a)vger.kernel.org Signed-off-by: Vincent Mailhol <mailhol.vincent(a)wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> Signed-off-by: Luo Gengkun <luogengkun2(a)huawei.com> --- drivers/net/can/pch_can.c | 2 +- drivers/net/can/pch_can.c.rej | 14 ++++++++++++++ 2 files changed, 15 insertions(+), 1 deletion(-) create mode 100644 drivers/net/can/pch_can.c.rej diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c index c1317889d3d8..ced11ea89269 100644 --- a/drivers/net/can/pch_can.c +++ b/drivers/net/can/pch_can.c @@ -703,11 +703,11 @@ static int pch_can_rx_normal(struct net_device *ndev, u32 obj_num, int quota) cf->data[i + 1] = data_reg >> 8; } - netif_receive_skb(skb); rcv_pkts++; stats->rx_packets++; quota--; stats->rx_bytes += cf->can_dlc; + netif_receive_skb(skb); pch_fifo_thresh(priv, obj_num); obj_num++; diff --git a/drivers/net/can/pch_can.c.rej b/drivers/net/can/pch_can.c.rej new file mode 100644 index 000000000000..229429bfb45c --- /dev/null +++ b/drivers/net/can/pch_can.c.rej @@ -0,0 +1,14 @@ +diff a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c (rejected hunks) +@@ -692,11 +692,11 @@ static int pch_can_rx_normal(struct net_device *ndev, u32 obj_num, int quota) + cf->data[i + 1] = data_reg >> 8; + } + +- netif_receive_skb(skb); + rcv_pkts++; + stats->rx_packets++; + quota--; + stats->rx_bytes += cf->len; ++ netif_receive_skb(skb); + + pch_fifo_thresh(priv, obj_num); + obj_num++; -- 2.34.1

2 1