- Kernel - mailweb.openeuler.org

[PATCH openEuler-22.03-LTS-SP1] PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0)
by Heyuan Wang 25 Oct '24

25 Oct '24

From: Kishon Vijay Abraham I <kishon(a)ti.com> stable inclusion from stable-v5.10.226 commit ebbdbbc580c1695dec283d0ba6448729dc993246 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAVU7T CVE: CVE-2024-47667 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 86f271f22bbb6391410a07e08d6ca3757fda01fa ] Errata #i2037 in AM65x/DRA80xM Processors Silicon Revision 1.0 (SPRZ452D_July 2018_Revised December 2019 [1]) mentions when an inbound PCIe TLP spans more than two internal AXI 128-byte bursts, the bus may corrupt the packet payload and the corrupt data may cause associated applications or the processor to hang. The workaround for Errata #i2037 is to limit the maximum read request size and maximum payload size to 128 bytes. Add workaround for Errata #i2037 here. The errata and workaround is applicable only to AM65x SR 1.0 and later versions of the silicon will have this fixed. [1] -> https://www.ti.com/lit/er/sprz452i/sprz452i.pdf Link: https://lore.kernel.org/linux-pci/16e1fcae-1ea7-46be-b157-096e05661b15@siem… Signed-off-by: Kishon Vijay Abraham I <kishon(a)ti.com> Signed-off-by: Achal Verma <a-verma1(a)ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr(a)ti.com> Signed-off-by: Jan Kiszka <jan.kiszka(a)siemens.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski(a)kernel.org> Reviewed-by: Siddharth Vadapalli <s-vadapalli(a)ti.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: wangheyuan <wangheyuan2(a)h-partners.com> --- drivers/pci/controller/dwc/pci-keystone.c | 44 ++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-) diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c index ee8fc5d98362..a39894ff783c 100644 --- a/drivers/pci/controller/dwc/pci-keystone.c +++ b/drivers/pci/controller/dwc/pci-keystone.c @@ -35,6 +35,11 @@ #define PCIE_DEVICEID_SHIFT 16 /* Application registers */ +#define PID 0x000 +#define RTL GENMASK(15, 11) +#define RTL_SHIFT 11 +#define AM6_PCI_PG1_RTL_VER 0x15 + #define CMD_STATUS 0x004 #define LTSSM_EN_VAL BIT(0) #define OB_XLAT_EN_VAL BIT(1) @@ -105,6 +110,8 @@ #define to_keystone_pcie(x) dev_get_drvdata((x)->dev) +#define PCI_DEVICE_ID_TI_AM654X 0xb00c + struct ks_pcie_of_data { enum dw_pcie_device_mode mode; const struct dw_pcie_host_ops *host_ops; @@ -544,7 +551,11 @@ static int ks_pcie_start_link(struct dw_pcie *pci) static void ks_pcie_quirk(struct pci_dev *dev) { struct pci_bus *bus = dev->bus; + struct keystone_pcie *ks_pcie; + struct device *bridge_dev; struct pci_dev *bridge; + u32 val; + static const struct pci_device_id rc_pci_devids[] = { { PCI_DEVICE(PCI_VENDOR_ID_TI, PCIE_RC_K2HK), .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, }, @@ -556,6 +567,11 @@ static void ks_pcie_quirk(struct pci_dev *dev) .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, }, { 0, }, }; + static const struct pci_device_id am6_pci_devids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_AM654X), + .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, }, + { 0, }, + }; if (pci_is_root_bus(bus)) bridge = dev; @@ -577,10 +593,36 @@ static void ks_pcie_quirk(struct pci_dev *dev) */ if (pci_match_id(rc_pci_devids, bridge)) { if (pcie_get_readrq(dev) > 256) { - dev_info(&dev->dev, "limiting MRRS to 256\n"); + dev_info(&dev->dev, "limiting MRRS to 256 bytes\n"); pcie_set_readrq(dev, 256); } } + + /* + * Memory transactions fail with PCI controller in AM654 PG1.0 + * when MRRS is set to more than 128 bytes. Force the MRRS to + * 128 bytes in all downstream devices. + */ + if (pci_match_id(am6_pci_devids, bridge)) { + bridge_dev = pci_get_host_bridge_device(dev); + if (!bridge_dev && !bridge_dev->parent) + return; + + ks_pcie = dev_get_drvdata(bridge_dev->parent); + if (!ks_pcie) + return; + + val = ks_pcie_app_readl(ks_pcie, PID); + val &= RTL; + val >>= RTL_SHIFT; + if (val != AM6_PCI_PG1_RTL_VER) + return; + + if (pcie_get_readrq(dev) > 128) { + dev_info(&dev->dev, "limiting MRRS to 128 bytes\n"); + pcie_set_readrq(dev, 128); + } + } } DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, ks_pcie_quirk); -- 2.25.1

2 1

[PATCH OLK-5.10] iommu/vt-d: Fix double list_add when enabling VMD in scalable mode
by dinglongwei 25 Oct '24

25 Oct '24

From: Adrian Huang <ahuang12(a)lenovo.com> stable inclusion from stable-v5.15.27 commit 2aaa085bd012a83be7104356301828585a2253ed category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IALPU1 CVE: CVE-2022-48916 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit b00833768e170a31af09268f7ab96aecfcca9623 upstream. When enabling VMD and IOMMU scalable mode, the following kernel panic call trace/kernel log is shown in Eagle Stream platform (Sapphire Rapids CPU) during booting: pci 0000:59:00.5: Adding to iommu group 42 ... vmd 0000:59:00.5: PCI host bridge to bus 10000:80 pci 10000:80:01.0: [8086:352a] type 01 class 0x060400 pci 10000:80:01.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit] pci 10000:80:01.0: enabling Extended Tags pci 10000:80:01.0: PME# supported from D0 D3hot D3cold pci 10000:80:01.0: DMAR: Setup RID2PASID failed pci 10000:80:01.0: Failed to add to iommu group 42: -16 pci 10000:80:03.0: [8086:352b] type 01 class 0x060400 pci 10000:80:03.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit] pci 10000:80:03.0: enabling Extended Tags pci 10000:80:03.0: PME# supported from D0 D3hot D3cold ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:29! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.17.0-rc3+ #7 Hardware name: Lenovo ThinkSystem SR650V3/SB27A86647, BIOS ESE101Y-1.00 01/13/2022 Workqueue: events work_for_cpu_fn RIP: 0010:__list_add_valid.cold+0x26/0x3f Code: 9a 4a ab ff 4c 89 c1 48 c7 c7 40 0c d9 9e e8 b9 b1 fe ff 0f 0b 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 f0 0c d9 9e e8 a2 b1 fe ff <0f> 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 98 0c d9 9e e8 8b b1 fe RSP: 0000:ff5ad434865b3a40 EFLAGS: 00010246 RAX: 0000000000000058 RBX: ff4d61160b74b880 RCX: ff4d61255e1fffa8 RDX: 0000000000000000 RSI: 00000000fffeffff RDI: ffffffff9fd34f20 RBP: ff4d611d8e245c00 R08: 0000000000000000 R09: ff5ad434865b3888 R10: ff5ad434865b3880 R11: ff4d61257fdc6fe8 R12: ff4d61160b74b8a0 R13: ff4d61160b74b8a0 R14: ff4d611d8e245c10 R15: ff4d611d8001ba70 FS: 0000000000000000(0000) GS:ff4d611d5ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ff4d611fa1401000 CR3: 0000000aa0210001 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> intel_pasid_alloc_table+0x9c/0x1d0 dmar_insert_one_dev_info+0x423/0x540 ? device_to_iommu+0x12d/0x2f0 intel_iommu_attach_device+0x116/0x290 __iommu_attach_device+0x1a/0x90 iommu_group_add_device+0x190/0x2c0 __iommu_probe_device+0x13e/0x250 iommu_probe_device+0x24/0x150 iommu_bus_notifier+0x69/0x90 blocking_notifier_call_chain+0x5a/0x80 device_add+0x3db/0x7b0 ? arch_memremap_can_ram_remap+0x19/0x50 ? memremap+0x75/0x140 pci_device_add+0x193/0x1d0 pci_scan_single_device+0xb9/0xf0 pci_scan_slot+0x4c/0x110 pci_scan_child_bus_extend+0x3a/0x290 vmd_enable_domain.constprop.0+0x63e/0x820 vmd_probe+0x163/0x190 local_pci_probe+0x42/0x80 work_for_cpu_fn+0x13/0x20 process_one_work+0x1e2/0x3b0 worker_thread+0x1c4/0x3a0 ? rescuer_thread+0x370/0x370 kthread+0xc7/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- ... Kernel panic - not syncing: Fatal exception Kernel Offset: 0x1ca00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- The following 'lspci' output shows devices '10000:80:*' are subdevices of the VMD device 0000:59:00.5: $ lspci ... 0000:59:00.5 RAID bus controller: Intel Corporation Volume Management Device NVMe RAID Controller (rev 20) ... 10000:80:01.0 PCI bridge: Intel Corporation Device 352a (rev 03) 10000:80:03.0 PCI bridge: Intel Corporation Device 352b (rev 03) 10000:80:05.0 PCI bridge: Intel Corporation Device 352c (rev 03) 10000:80:07.0 PCI bridge: Intel Corporation Device 352d (rev 03) 10000:81:00.0 Non-Volatile memory controller: Intel Corporation NVMe Datacenter SSD [3DNAND, Beta Rock Controller] 10000:82:00.0 Non-Volatile memory controller: Intel Corporation NVMe Datacenter SSD [3DNAND, Beta Rock Controller] The symptom 'list_add double add' is caused by the following failure message: pci 10000:80:01.0: DMAR: Setup RID2PASID failed pci 10000:80:01.0: Failed to add to iommu group 42: -16 pci 10000:80:03.0: [8086:352b] type 01 class 0x060400 Device 10000:80:01.0 is the subdevice of the VMD device 0000:59:00.5, so invoking intel_pasid_alloc_table() gets the pasid_table of the VMD device 0000:59:00.5. Here is call path: intel_pasid_alloc_table pci_for_each_dma_alias get_alias_pasid_table search_pasid_table pci_real_dma_dev() in pci_for_each_dma_alias() gets the real dma device which is the VMD device 0000:59:00.5. However, pte of the VMD device 0000:59:00.5 has been configured during this message "pci 0000:59:00.5: Adding to iommu group 42". So, the status -EBUSY is returned when configuring pasid entry for device 10000:80:01.0. It then invokes dmar_remove_one_dev_info() to release 'struct device_domain_info *' from iommu_devinfo_cache. But, the pasid table is not released because of the following statement in __dmar_remove_one_dev_info(): if (info->dev && !dev_is_real_dma_subdevice(info->dev)) { ... intel_pasid_free_table(info->dev); } The subsequent dmar_insert_one_dev_info() operation of device 10000:80:03.0 allocates 'struct device_domain_info *' from iommu_devinfo_cache. The allocated address is the same address that is released previously for device 10000:80:01.0. Finally, invoking device_attach_pasid_table() causes the issue. `git bisect` points to the offending commit 474dd1c65064 ("iommu/vt-d: Fix clearing real DMA device's scalable-mode context entries"), which releases the pasid table if the device is not the subdevice by checking the returned status of dev_is_real_dma_subdevice(). Reverting the offending commit can work around the issue. The solution is to prevent from allocating pasid table if those devices are subdevices of the VMD device. Fixes: 474dd1c65064 ("iommu/vt-d: Fix clearing real DMA device's scalable-mode context entries") Cc: stable(a)vger.kernel.org # v5.14+ Signed-off-by: Adrian Huang <ahuang12(a)lenovo.com> Link: https://lore.kernel.org/r/20220216091307.703-1-adrianhuang0701@gmail.com Signed-off-by: Lu Baolu <baolu.lu(a)linux.intel.com> Link: https://lore.kernel.org/r/20220221053348.262724-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: dinglongwei <dinglongwei1(a)huawei.com> --- drivers/iommu/intel/iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 069b94b55ab2..db4197689ffa 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -2838,7 +2838,7 @@ static struct dmar_domain *dmar_insert_one_dev_info(struct intel_iommu *iommu, spin_unlock_irqrestore(&device_domain_lock, flags); /* PASID table is mandatory for a PCI device in scalable mode. */ - if (dev && dev_is_pci(dev) && sm_supported(iommu)) { + if (sm_supported(iommu) && !dev_is_real_dma_subdevice(dev)) { ret = intel_pasid_alloc_table(dev); if (ret) { dev_err(dev, "PASID table allocation failed\n"); -- 2.17.1

2 1

[PATCH openEuler-22.03-LTS-SP1 0/2] Fix CVE-2024-26917 and CVE-2024-50025
by Li Lingfeng 25 Oct '24

25 Oct '24

Lee Duncan (1): scsi: fnic: Move fnic_fnic_flush_tx() to a work queue Martin Wilck (1): scsi: fnic: Move flush_work initialization out of if block drivers/scsi/fnic/fnic.h | 3 ++- drivers/scsi/fnic/fnic_fcs.c | 5 +++-- drivers/scsi/fnic/fnic_main.c | 1 + drivers/scsi/fnic/fnic_scsi.c | 4 ++-- 4 files changed, 8 insertions(+), 5 deletions(-) -- 2.31.1

2 3

[PATCH OLK-5.10 0/2] scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run
by Li Lingfeng 25 Oct '24

25 Oct '24

Reset shost->last_reset if EH does not run and fix kabi broken. Ewan D. Milne (1): scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run Li Lingfeng (1): scsi: fix kabi broken drivers/scsi/hosts.c | 1 + drivers/scsi/scsi_error.c | 25 +++++++++++++++++++++++++ drivers/scsi/scsi_lib.c | 1 + include/scsi/scsi_cmnd.h | 2 +- include/scsi/scsi_host.h | 4 ++-- 5 files changed, 30 insertions(+), 3 deletions(-) -- 2.31.1

2 3

[OLK-6.6] drm/amd/display: Initialize get_bytes_per_element's default to 1
by Bowen You 25 Oct '24

25 Oct '24

From: Alex Hung <alex.hung(a)amd.com> mainline inclusion from mainline-v6.12-rc1 commit 4067f4fa0423a89fb19a30b57231b384d77d2610 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYR8X CVE: CVE-2024-49892 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Variables, used as denominators and maybe not assigned to other values, should not be 0. bytes_per_element_y & bytes_per_element_c are initialized by get_bytes_per_element() which should never return 0. This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity. Signed-off-by: Alex Hung <alex.hung(a)amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Bowen You <youbowen2(a)huawei.com> --- .../gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c | 2 +- .../gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c index 0fc9f3e3ffae..f603486af6e3 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c @@ -78,7 +78,7 @@ static void calculate_ttu_cursor(struct display_mode_lib *mode_lib, static unsigned int get_bytes_per_element(enum source_format_class source_format, bool is_chroma) { - unsigned int ret_val = 0; + unsigned int ret_val = 1; if (source_format == dm_444_16) { if (!is_chroma) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c b/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c index 618f4b682ab1..9f28e4d3c664 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c @@ -53,7 +53,7 @@ static void calculate_ttu_cursor( static unsigned int get_bytes_per_element(enum source_format_class source_format, bool is_chroma) { - unsigned int ret_val = 0; + unsigned int ret_val = 1; if (source_format == dm_444_16) { if (!is_chroma) -- 2.34.1

1 0

[PATCH OLK-6.6] drm/amd/display: Add null check for head_pipe in dcn201_acquire_free_pipe_for_layer
by Yu Kuai 25 Oct '24

25 Oct '24

From: Srinivasan Shanmugam <srinivasan.shanmugam(a)amd.com> mainline inclusion from mainline-v6.12-rc1 commit f22f4754aaa47d8c59f166ba3042182859e5dff7 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYR8R CVE: CVE-2024-49919 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- This commit addresses a potential null pointer dereference issue in the `dcn201_acquire_free_pipe_for_layer` function. The issue could occur when `head_pipe` is null. The fix adds a check to ensure `head_pipe` is not null before asserting it. If `head_pipe` is null, the function returns NULL to prevent a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn201/dcn201_resource.c:1016 dcn201_acquire_free_pipe_for_layer() error: we previously assumed 'head_pipe' could be null (see line 1010) Cc: Tom Chung <chiahsuan.chung(a)amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira(a)amd.com> Cc: Roman Li <roman.li(a)amd.com> Cc: Alex Hung <alex.hung(a)amd.com> Cc: Aurabindo Pillai <aurabindo.pillai(a)amd.com> Cc: Harry Wentland <harry.wentland(a)amd.com> Cc: Hamza Mahfooz <hamza.mahfooz(a)amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam(a)amd.com> Reviewed-by: Tom Chung <chiahsuan.chung(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Conflicts: drivers/gpu/drm/amd/display/dc/dcn201/dcn201_resource.c drivers/gpu/drm/amd/display/dc/resource/dcn201/dcn201_resource.c, [commit 8b8eed05a1c6 ("drm/amd/display: Refactor resource into component directory") is not backported, which moved dcn201_resource.c] Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> --- drivers/gpu/drm/amd/display/dc/dcn201/dcn201_resource.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/dcn201/dcn201_resource.c b/drivers/gpu/drm/amd/display/dc/dcn201/dcn201_resource.c index 2dc4d2c1410b..8efe3f32a0e7 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn201/dcn201_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn201/dcn201_resource.c @@ -1002,8 +1002,10 @@ static struct pipe_ctx *dcn201_acquire_free_pipe_for_layer( struct pipe_ctx *head_pipe = resource_get_otg_master_for_stream(res_ctx, opp_head_pipe->stream); struct pipe_ctx *idle_pipe = resource_find_free_secondary_pipe_legacy(res_ctx, pool, head_pipe); - if (!head_pipe) + if (!head_pipe) { ASSERT(0); + return NULL; + } if (!idle_pipe) return NULL; -- 2.39.2

2 1

[PATCH openEuler-22.03-LTS-SP1] iommu/vt-d: Fix double list_add when enabling VMD in scalable mode
by dinglongwei 25 Oct '24

25 Oct '24

From: Adrian Huang <ahuang12(a)lenovo.com> stable inclusion from stable-v5.15.27 commit 2aaa085bd012a83be7104356301828585a2253ed category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IALPU1 CVE: CVE-2022-48916 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit b00833768e170a31af09268f7ab96aecfcca9623 upstream. When enabling VMD and IOMMU scalable mode, the following kernel panic call trace/kernel log is shown in Eagle Stream platform (Sapphire Rapids CPU) during booting: pci 0000:59:00.5: Adding to iommu group 42 ... vmd 0000:59:00.5: PCI host bridge to bus 10000:80 pci 10000:80:01.0: [8086:352a] type 01 class 0x060400 pci 10000:80:01.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit] pci 10000:80:01.0: enabling Extended Tags pci 10000:80:01.0: PME# supported from D0 D3hot D3cold pci 10000:80:01.0: DMAR: Setup RID2PASID failed pci 10000:80:01.0: Failed to add to iommu group 42: -16 pci 10000:80:03.0: [8086:352b] type 01 class 0x060400 pci 10000:80:03.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit] pci 10000:80:03.0: enabling Extended Tags pci 10000:80:03.0: PME# supported from D0 D3hot D3cold ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:29! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.17.0-rc3+ #7 Hardware name: Lenovo ThinkSystem SR650V3/SB27A86647, BIOS ESE101Y-1.00 01/13/2022 Workqueue: events work_for_cpu_fn RIP: 0010:__list_add_valid.cold+0x26/0x3f Code: 9a 4a ab ff 4c 89 c1 48 c7 c7 40 0c d9 9e e8 b9 b1 fe ff 0f 0b 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 f0 0c d9 9e e8 a2 b1 fe ff <0f> 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 98 0c d9 9e e8 8b b1 fe RSP: 0000:ff5ad434865b3a40 EFLAGS: 00010246 RAX: 0000000000000058 RBX: ff4d61160b74b880 RCX: ff4d61255e1fffa8 RDX: 0000000000000000 RSI: 00000000fffeffff RDI: ffffffff9fd34f20 RBP: ff4d611d8e245c00 R08: 0000000000000000 R09: ff5ad434865b3888 R10: ff5ad434865b3880 R11: ff4d61257fdc6fe8 R12: ff4d61160b74b8a0 R13: ff4d61160b74b8a0 R14: ff4d611d8e245c10 R15: ff4d611d8001ba70 FS: 0000000000000000(0000) GS:ff4d611d5ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ff4d611fa1401000 CR3: 0000000aa0210001 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> intel_pasid_alloc_table+0x9c/0x1d0 dmar_insert_one_dev_info+0x423/0x540 ? device_to_iommu+0x12d/0x2f0 intel_iommu_attach_device+0x116/0x290 __iommu_attach_device+0x1a/0x90 iommu_group_add_device+0x190/0x2c0 __iommu_probe_device+0x13e/0x250 iommu_probe_device+0x24/0x150 iommu_bus_notifier+0x69/0x90 blocking_notifier_call_chain+0x5a/0x80 device_add+0x3db/0x7b0 ? arch_memremap_can_ram_remap+0x19/0x50 ? memremap+0x75/0x140 pci_device_add+0x193/0x1d0 pci_scan_single_device+0xb9/0xf0 pci_scan_slot+0x4c/0x110 pci_scan_child_bus_extend+0x3a/0x290 vmd_enable_domain.constprop.0+0x63e/0x820 vmd_probe+0x163/0x190 local_pci_probe+0x42/0x80 work_for_cpu_fn+0x13/0x20 process_one_work+0x1e2/0x3b0 worker_thread+0x1c4/0x3a0 ? rescuer_thread+0x370/0x370 kthread+0xc7/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- ... Kernel panic - not syncing: Fatal exception Kernel Offset: 0x1ca00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- The following 'lspci' output shows devices '10000:80:*' are subdevices of the VMD device 0000:59:00.5: $ lspci ... 0000:59:00.5 RAID bus controller: Intel Corporation Volume Management Device NVMe RAID Controller (rev 20) ... 10000:80:01.0 PCI bridge: Intel Corporation Device 352a (rev 03) 10000:80:03.0 PCI bridge: Intel Corporation Device 352b (rev 03) 10000:80:05.0 PCI bridge: Intel Corporation Device 352c (rev 03) 10000:80:07.0 PCI bridge: Intel Corporation Device 352d (rev 03) 10000:81:00.0 Non-Volatile memory controller: Intel Corporation NVMe Datacenter SSD [3DNAND, Beta Rock Controller] 10000:82:00.0 Non-Volatile memory controller: Intel Corporation NVMe Datacenter SSD [3DNAND, Beta Rock Controller] The symptom 'list_add double add' is caused by the following failure message: pci 10000:80:01.0: DMAR: Setup RID2PASID failed pci 10000:80:01.0: Failed to add to iommu group 42: -16 pci 10000:80:03.0: [8086:352b] type 01 class 0x060400 Device 10000:80:01.0 is the subdevice of the VMD device 0000:59:00.5, so invoking intel_pasid_alloc_table() gets the pasid_table of the VMD device 0000:59:00.5. Here is call path: intel_pasid_alloc_table pci_for_each_dma_alias get_alias_pasid_table search_pasid_table pci_real_dma_dev() in pci_for_each_dma_alias() gets the real dma device which is the VMD device 0000:59:00.5. However, pte of the VMD device 0000:59:00.5 has been configured during this message "pci 0000:59:00.5: Adding to iommu group 42". So, the status -EBUSY is returned when configuring pasid entry for device 10000:80:01.0. It then invokes dmar_remove_one_dev_info() to release 'struct device_domain_info *' from iommu_devinfo_cache. But, the pasid table is not released because of the following statement in __dmar_remove_one_dev_info(): if (info->dev && !dev_is_real_dma_subdevice(info->dev)) { ... intel_pasid_free_table(info->dev); } The subsequent dmar_insert_one_dev_info() operation of device 10000:80:03.0 allocates 'struct device_domain_info *' from iommu_devinfo_cache. The allocated address is the same address that is released previously for device 10000:80:01.0. Finally, invoking device_attach_pasid_table() causes the issue. `git bisect` points to the offending commit 474dd1c65064 ("iommu/vt-d: Fix clearing real DMA device's scalable-mode context entries"), which releases the pasid table if the device is not the subdevice by checking the returned status of dev_is_real_dma_subdevice(). Reverting the offending commit can work around the issue. The solution is to prevent from allocating pasid table if those devices are subdevices of the VMD device. Fixes: 474dd1c65064 ("iommu/vt-d: Fix clearing real DMA device's scalable-mode context entries") Cc: stable(a)vger.kernel.org # v5.14+ Signed-off-by: Adrian Huang <ahuang12(a)lenovo.com> Link: https://lore.kernel.org/r/20220216091307.703-1-adrianhuang0701@gmail.com Signed-off-by: Lu Baolu <baolu.lu(a)linux.intel.com> Link: https://lore.kernel.org/r/20220221053348.262724-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: dinglongwei <dinglongwei1(a)huawei.com> --- drivers/iommu/intel/iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 671685e22c7b..79d8c9012e9e 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -2815,7 +2815,7 @@ static struct dmar_domain *dmar_insert_one_dev_info(struct intel_iommu *iommu, spin_unlock_irqrestore(&device_domain_lock, flags); /* PASID table is mandatory for a PCI device in scalable mode. */ - if (dev && dev_is_pci(dev) && sm_supported(iommu)) { + if (sm_supported(iommu) && !dev_is_real_dma_subdevice(dev)) { ret = intel_pasid_alloc_table(dev); if (ret) { dev_err(dev, "PASID table allocation failed\n"); -- 2.17.1

2 1

[OLK-5.10] drm/amd/display: Initialize get_bytes_per_element's default to 1
by Bowen You 25 Oct '24

25 Oct '24

From: Alex Hung <alex.hung(a)amd.com> mainline inclusion from mainline-v6.12-rc1 commit 4067f4fa0423a89fb19a30b57231b384d77d2610 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYR8X CVE: CVE-2024-49892 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Variables, used as denominators and maybe not assigned to other values, should not be 0. bytes_per_element_y & bytes_per_element_c are initialized by get_bytes_per_element() which should never return 0. This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity. Signed-off-by: Alex Hung <alex.hung(a)amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Bowen You <youbowen2(a)huawei.com> --- .../gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c | 2 +- .../gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c index 6a6d5970d1d5..0388694572f5 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c @@ -78,7 +78,7 @@ static void calculate_ttu_cursor(struct display_mode_lib *mode_lib, static unsigned int get_bytes_per_element(enum source_format_class source_format, bool is_chroma) { - unsigned int ret_val = 0; + unsigned int ret_val = 1; if (source_format == dm_444_16) { if (!is_chroma) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c b/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c index dc1c81a6e377..8593fd07116a 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c @@ -53,7 +53,7 @@ static void calculate_ttu_cursor( static unsigned int get_bytes_per_element(enum source_format_class source_format, bool is_chroma) { - unsigned int ret_val = 0; + unsigned int ret_val = 1; if (source_format == dm_444_16) { if (!is_chroma) -- 2.34.1

1 0

[PATCH openEuler-22.03-LTS-SP1] nilfs2: fix potential oob read in nilfs_btree_check_delete()
by Long Li 25 Oct '24

25 Oct '24

From: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> stable inclusion from stable-v6.6.53 commit 257f9e5185eb6de83377caea686c306e22e871f2 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYQRO CVE: CVE-2024-47757 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… -------------------------------- [ Upstream commit f9c96351aa6718b42a9f42eaf7adce0356bdb5e8 ] The function nilfs_btree_check_delete(), which checks whether degeneration to direct mapping occurs before deleting a b-tree entry, causes memory access outside the block buffer when retrieving the maximum key if the root node has no entries. This does not usually happen because b-tree mappings with 0 child nodes are never created by mkfs.nilfs2 or nilfs2 itself. However, it can happen if the b-tree root node read from a device is configured that way, so fix this potential issue by adding a check for that case. Link: https://lkml.kernel.org/r/20240904081401.16682-4-konishi.ryusuke@gmail.com Fixes: 17c76b0104e4 ("nilfs2: B-tree based block mapping") Signed-off-by: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> Cc: Lizhi Xu <lizhi.xu(a)windriver.com> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Long Li <leo.lilong(a)huawei.com> --- fs/nilfs2/btree.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c index 90842645328b..3ffee94ab960 100644 --- a/fs/nilfs2/btree.c +++ b/fs/nilfs2/btree.c @@ -1654,13 +1654,16 @@ static int nilfs_btree_check_delete(struct nilfs_bmap *btree, __u64 key) int nchildren, ret; root = nilfs_btree_get_root(btree); + nchildren = nilfs_btree_node_get_nchildren(root); + if (unlikely(nchildren == 0)) + return 0; + switch (nilfs_btree_height(btree)) { case 2: bh = NULL; node = root; break; case 3: - nchildren = nilfs_btree_node_get_nchildren(root); if (nchildren > 1) return 0; ptr = nilfs_btree_node_get_ptr(root, nchildren - 1, @@ -1669,12 +1672,12 @@ static int nilfs_btree_check_delete(struct nilfs_bmap *btree, __u64 key) if (ret < 0) return ret; node = (struct nilfs_btree_node *)bh->b_data; + nchildren = nilfs_btree_node_get_nchildren(node); break; default: return 0; } - nchildren = nilfs_btree_node_get_nchildren(node); maxkey = nilfs_btree_node_get_key(node, nchildren - 1); nextmaxkey = (nchildren > 1) ? nilfs_btree_node_get_key(node, nchildren - 2) : 0; -- 2.39.2

2 1

[PATCH OLK-5.10] nilfs2: fix potential oob read in nilfs_btree_check_delete()
by Long Li 25 Oct '24

25 Oct '24

From: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> stable inclusion from stable-v6.6.53 commit 257f9e5185eb6de83377caea686c306e22e871f2 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYQRO CVE: CVE-2024-47757 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… -------------------------------- [ Upstream commit f9c96351aa6718b42a9f42eaf7adce0356bdb5e8 ] The function nilfs_btree_check_delete(), which checks whether degeneration to direct mapping occurs before deleting a b-tree entry, causes memory access outside the block buffer when retrieving the maximum key if the root node has no entries. This does not usually happen because b-tree mappings with 0 child nodes are never created by mkfs.nilfs2 or nilfs2 itself. However, it can happen if the b-tree root node read from a device is configured that way, so fix this potential issue by adding a check for that case. Link: https://lkml.kernel.org/r/20240904081401.16682-4-konishi.ryusuke@gmail.com Fixes: 17c76b0104e4 ("nilfs2: B-tree based block mapping") Signed-off-by: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> Cc: Lizhi Xu <lizhi.xu(a)windriver.com> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Long Li <leo.lilong(a)huawei.com> --- fs/nilfs2/btree.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c index a426e4e2acda..43a180be9381 100644 --- a/fs/nilfs2/btree.c +++ b/fs/nilfs2/btree.c @@ -1659,13 +1659,16 @@ static int nilfs_btree_check_delete(struct nilfs_bmap *btree, __u64 key) int nchildren, ret; root = nilfs_btree_get_root(btree); + nchildren = nilfs_btree_node_get_nchildren(root); + if (unlikely(nchildren == 0)) + return 0; + switch (nilfs_btree_height(btree)) { case 2: bh = NULL; node = root; break; case 3: - nchildren = nilfs_btree_node_get_nchildren(root); if (nchildren > 1) return 0; ptr = nilfs_btree_node_get_ptr(root, nchildren - 1, @@ -1674,12 +1677,12 @@ static int nilfs_btree_check_delete(struct nilfs_bmap *btree, __u64 key) if (ret < 0) return ret; node = (struct nilfs_btree_node *)bh->b_data; + nchildren = nilfs_btree_node_get_nchildren(node); break; default: return 0; } - nchildren = nilfs_btree_node_get_nchildren(node); maxkey = nilfs_btree_node_get_key(node, nchildren - 1); nextmaxkey = (nchildren > 1) ? nilfs_btree_node_get_key(node, nchildren - 2) : 0; -- 2.39.2

2 1