- Kernel - mailweb.openeuler.org

[PATCH OLK-5.10] dm: add error handling support for add_disk()
by Li Lingfeng 18 Dec '23

18 Dec '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I81XCK CVE: NA --------------------------- NULL pointer dereference and uaf will be triggered in del_gendisk() if add_disk has not complete. Clear request_queue and gendisk early if add_disk fail. Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- drivers/md/dm.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index e2df27c373f9..654aae1dd777 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1853,13 +1853,11 @@ static struct mapped_device *alloc_dev(int minor) * established. If request-based table is loaded: blk-mq will * override accordingly. */ - md->queue = blk_alloc_queue(numa_node_id); - if (!md->queue) - goto bad; - - md->disk = alloc_disk_node(1, md->numa_node_id); + md->disk = blk_alloc_disk(md->numa_node_id); if (!md->disk) goto bad; + md->disk->minors = 1; + md->queue = md->disk->queue; init_waitqueue_head(&md->wait); INIT_WORK(&md->work, dm_wq_work); @@ -1873,11 +1871,16 @@ static struct mapped_device *alloc_dev(int minor) md->disk->major = _major; md->disk->first_minor = minor; md->disk->fops = &dm_blk_dops; - md->disk->queue = md->queue; md->disk->private_data = md; sprintf(md->disk->disk_name, "dm-%d", minor); - add_disk_no_queue_reg(md->disk); + r = add_disk_no_queue_reg_safe(md->disk); + if (r) { + blk_cleanup_disk(md->disk); + md->queue = NULL; + md->disk = NULL; + goto bad; + } if (IS_ENABLED(CONFIG_DAX_DRIVER)) { md->dax_dev = alloc_dax(md, md->disk->disk_name, -- 2.31.1

2 1

[PATCH OLK-6.6 v3] blk-throttle: enable hierarchical throttle in cgroup v1
by Yu Kuai 18 Dec '23

18 Dec '23

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4R7RE CVE: NA ----------------------------------------------- blkio subsytem is not under default hierarchy in cgroup v1 by default, which means configurations will only be effective on current cgroup for io throttle. This patch introduces a new feature that enable default hierarchy for io throttle, which means configurations will be effective on child cgroups. Such feature is disabled by default, and can be enabled by: 1) set CONFIG_BLK_DEV_SUPPORT_LEGACY_GLOBAL_LIMIT, then 2) adding "blkcg_global_limit=1" or "blkcg_global_limit=Y" or "blkcg_global_limit=y" in boot cmd; Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + block/Kconfig | 11 ++++++++++ block/blk-throttle.c | 28 +++++++++++++++++++++++++- 4 files changed, 40 insertions(+), 1 deletion(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 039f3496af78..3e76da491416 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -855,6 +855,7 @@ CONFIG_BLK_DEV_INTEGRITY_T10=m CONFIG_BLK_DEV_ZONED=y CONFIG_BLK_DEV_THROTTLING=y # CONFIG_BLK_DEV_THROTTLING_LOW is not set +CONFIG_BLK_DEV_SUPPORT_LEGACY_GLOBAL_LIMIT=y CONFIG_BLK_WBT=y CONFIG_BLK_WBT_MQ=y # CONFIG_BLK_CGROUP_IOLATENCY is not set diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index f481c1c8b4d1..a4bd203e6db5 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -925,6 +925,7 @@ CONFIG_BLK_DEV_INTEGRITY_T10=m CONFIG_BLK_DEV_ZONED=y CONFIG_BLK_DEV_THROTTLING=y # CONFIG_BLK_DEV_THROTTLING_LOW is not set +CONFIG_BLK_DEV_SUPPORT_LEGACY_GLOBAL_LIMIT=y CONFIG_BLK_WBT=y CONFIG_BLK_WBT_MQ=y # CONFIG_BLK_CGROUP_IOLATENCY is not set diff --git a/block/Kconfig b/block/Kconfig index f1364d1c0d93..95378563a05a 100644 --- a/block/Kconfig +++ b/block/Kconfig @@ -111,6 +111,17 @@ config BLK_DEV_THROTTLING_LOW Note, this is an experimental interface and could be changed someday. +config BLK_DEV_SUPPORT_LEGACY_GLOBAL_LIMIT + bool "Block layer global limit in cgroup v1" + depends on BLK_DEV_THROTTLING + default n + help + Blkio subsytem is not under default hierarchy in cgroup v1 by default, + enabling this will support globlal limit in cgroup v1. + + Note, a cmdline "blkcg_global_limit=1" is still required to enabled this + feature. + config BLK_WBT bool "Enable support for block device writeback throttling" help diff --git a/block/blk-throttle.c b/block/blk-throttle.c index 13e4377a8b28..76a54f43135c 100644 --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -41,6 +41,31 @@ /* A workqueue to queue throttle related work */ static struct workqueue_struct *kthrotld_workqueue; +#ifdef CONFIG_BLK_DEV_SUPPORT_LEGACY_GLOBAL_LIMIT +/* True if global limit is enabled in cgroup v1 */ +static bool global_limit; + +static inline bool blkcg_global_limit_enabled(void) +{ + return global_limit; +} + +static int __init setup_global_limit(char *str) +{ + if (!strcmp(str, "1") || !strcmp(str, "Y") || !strcmp(str, "y")) + global_limit = true; + + return 1; +} + +__setup("blkcg_global_limit=", setup_global_limit); + +#else +static inline bool blkcg_global_limit_enabled(void) +{ + return false; +} +#endif #define rb_entry_tg(node) rb_entry((node), struct throtl_grp, rb_node) /* We measure latency for request size from <= 4k to >= 1M */ @@ -405,7 +430,8 @@ static void throtl_pd_init(struct blkg_policy_data *pd) * regardless of the position of the group in the hierarchy. */ sq->parent_sq = &td->service_queue; - if (cgroup_subsys_on_dfl(io_cgrp_subsys) && blkg->parent) + if ((cgroup_subsys_on_dfl(io_cgrp_subsys) || + blkcg_global_limit_enabled()) && blkg->parent) sq->parent_sq = &blkg_to_tg(blkg->parent)->service_queue; tg->td = td; } -- 2.39.2

2 1

[PATCH OLK-6.6] fs/dirty_pages: dump the number of dirty pages for each inode
by Zizhi Wo 18 Dec '23

18 Dec '23

From: yu kuai <yukuai3(a)huawei.com> hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8OHM4?from=project-issue CVE: NA --------------------------- In order to analyse the IO performance when using buffer IO, it's useful to obtain the number of dirty pages for each inode in the filesystem. This feature depends on 'CONFIG_DIRTY_PAGES'. It creates 3 interfaces by using procfs. /proc/dirty/buffer_size for buffer allocation and release, /proc/dirty/page_threshold to filter result and /proc/dirty/dirty_list to get dirty pages. Signed-off-by: yu kuai <yukuai3(a)huawei.com> Signed-off-by: Zizhi Wo <wozizhi(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/Kconfig | 13 + fs/Makefile | 1 + fs/dirty_pages.c | 457 +++++++++++++++++++++++++ 5 files changed, 473 insertions(+) create mode 100644 fs/dirty_pages.c diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 039f3496af78..66b4812050df 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -6883,6 +6883,7 @@ CONFIG_PROC_PAGE_MONITOR=y CONFIG_PROC_CHILDREN=y CONFIG_KERNFS=y CONFIG_SYSFS=y +CONFIG_DIRTY_PAGES=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index f481c1c8b4d1..6133f66fde61 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -8090,6 +8090,7 @@ CONFIG_PROC_PID_ARCH_STATUS=y CONFIG_PROC_CPU_RESCTRL=y CONFIG_KERNFS=y CONFIG_SYSFS=y +CONFIG_DIRTY_PAGES=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y diff --git a/fs/Kconfig b/fs/Kconfig index aa7e03cc1941..a2280cf98729 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -170,6 +170,19 @@ source "fs/proc/Kconfig" source "fs/kernfs/Kconfig" source "fs/sysfs/Kconfig" +config DIRTY_PAGES + bool "Dumps the number of dirty pages of each file" + depends on PROC_FS + default y + help + This config supports the rendering of dirty page data to the user, + which may be useful to analyze the IO performance when using buffer + IO. + + It create 3 interfaces by using procfs. /proc/dirty/buffer_size for + buffer allocation and release; /proc/dirty/page_threshold to filter + result; /proc/dirty/dirty_list to get dirty pages. + config TMPFS bool "Tmpfs virtual memory file system support (former shm fs)" depends on SHMEM diff --git a/fs/Makefile b/fs/Makefile index f9541f40be4e..6246e173e1e4 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_FS_POSIX_ACL) += posix_acl.o obj-$(CONFIG_NFS_COMMON) += nfs_common/ obj-$(CONFIG_COREDUMP) += coredump.o obj-$(CONFIG_SYSCTL) += drop_caches.o sysctls.o +obj-$(CONFIG_DIRTY_PAGES) += dirty_pages.o obj-$(CONFIG_FHANDLE) += fhandle.o obj-y += iomap/ diff --git a/fs/dirty_pages.c b/fs/dirty_pages.c new file mode 100644 index 000000000000..884e448d0c6c --- /dev/null +++ b/fs/dirty_pages.c @@ -0,0 +1,457 @@ +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/uaccess.h> +#include <linux/pagemap.h> +#include <linux/pagevec.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/proc_fs.h> +#include <linux/kdev_t.h> +#include <linux/vmalloc.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include "internal.h" + +static char *buf_dirty; /* buffer to store number of dirty pages */ +static unsigned long buf_size; /* size of buffer in bytes */ +static long buff_num; /* size of buffer in number of pages */ +static int buff_limit; /* filter threshold of dirty pages*/ + +static struct proc_dir_entry *dirty_dir; + +static struct mutex buff_used; /* buffer is in used */ +static struct mutex buff_lock; /* lock when buffer is changed */ + +/* proc root directory */ +#define DIRTY_ROOT "dirty" +/* proc file for buffer allocation and release */ +#define DIRTY_SWITCH "buffer_size" +/* proc file to obtain diry pages of each inode */ +#define DIRTY_PAGES "dirty_list" +/* proc file to filter result */ +#define DIRTY_LIMIT "page_threshold" + +#define MAX_BUFF_SIZE 102400 +static void seq_set_overflow(struct seq_file *m) +{ + m->count = m->size; +} + +static unsigned long dump_dirtypages_inode(struct inode *inode) +{ + struct folio_batch fbatch; + unsigned long nr_dirtys = 0; + unsigned int nr_folios; + pgoff_t index = 0; + + folio_batch_init(&fbatch); + + while (1) { + nr_folios = filemap_get_folios_tag(inode->i_mapping, &index, + (pgoff_t)-1, PAGECACHE_TAG_DIRTY, &fbatch); + if (!nr_folios) + break; + + folio_batch_release(&fbatch); + cond_resched(); + + nr_dirtys += nr_folios; + } + + return nr_dirtys; +} + +static char *inode_filename(struct inode *inode, char *tmpname) +{ + struct dentry *dentry; + char *filename; + + dentry = d_find_alias(inode); + if (!dentry) + return ERR_PTR(-ENOENT); + + tmpname[PATH_MAX-1] = '\0'; + filename = dentry_path_raw(dentry, tmpname, PATH_MAX); + + dput(dentry); + + return filename; +} + +static inline bool is_sb_writable(struct super_block *sb) +{ + if (sb_rdonly(sb)) + return false; + + if (sb->s_writers.frozen == SB_FREEZE_COMPLETE) + return false; + + return true; +} + +/* + * dump_dirtypages_sb - dump the dirty pages of each inode in the sb + * @sb the super block + * @m the seq_file witch is initialized in proc_dpages_open + * + * For each inode in the sb, call dump_dirtypages_pages to get the number + * of dirty pages. And use seq_printf to store the result in the buffer + * if it's not less than the threshold. The inode in unusual state will + * be skipped. + */ +static void dump_dirtypages_sb(struct super_block *sb, struct seq_file *m) +{ + struct inode *inode, *toput_inode = NULL; + unsigned long nr_dirtys; + const char *fstype; + char *filename; + char *tmpname; + int limit = READ_ONCE(buff_limit); + + if (!is_sb_writable(sb)) + return; + + tmpname = kmalloc(PATH_MAX, GFP_KERNEL); + if (!tmpname) + return; + + spin_lock(&sb->s_inode_list_lock); + list_for_each_entry(inode, &sb->s_inodes, i_sb_list) { + spin_lock(&inode->i_lock); + + /* + * We must skip inodes in unusual state. We may also skip + * inodes without pages but we deliberately won't in case + * we need to reschedule to avoid softlockups. + */ + if ((inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) || + (inode->i_mapping->nrpages == 0 && !need_resched())) { + spin_unlock(&inode->i_lock); + continue; + } + __iget(inode); + spin_unlock(&inode->i_lock); + spin_unlock(&sb->s_inode_list_lock); + + cond_resched(); + + nr_dirtys = dump_dirtypages_inode(inode); + if (!nr_dirtys || nr_dirtys < limit) + goto skip; + + filename = inode_filename(inode, tmpname); + if (IS_ERR_OR_NULL(filename)) + filename = "unknown"; + + if (sb->s_type && sb->s_type->name) + fstype = sb->s_type->name; + else + fstype = "unknown"; + /* + * seq_printf return nothing, if the buffer is exhausted + * (m->size <= m->count), seq_printf will not store + * anything, just set m->count = m->size and return. In + * that case, log a warn message in buffer to remind users. + */ + if (m->size <= m->count) { + seq_set_overflow(m); + strncpy(m->buf + m->count - 12, "terminated\n\0", 12); + iput(inode); + goto done; + } + seq_printf(m, "FSType: %s, Dev ID: %u(%u:%u) ino %lu, dirty pages %lu, path %s\n", + fstype, sb->s_dev, MAJOR(sb->s_dev), + MINOR(sb->s_dev), inode->i_ino, + nr_dirtys, filename); +skip: + iput(toput_inode); + toput_inode = inode; + spin_lock(&sb->s_inode_list_lock); + } + spin_unlock(&sb->s_inode_list_lock); +done: + iput(toput_inode); + kfree(tmpname); +} + +static int proc_dpages_show(struct seq_file *m, void *v) +{ + iterate_supers((void *)dump_dirtypages_sb, (void *)m); + return 0; +} + + +static ssize_t seq_read_dirty( + struct file *file, + char __user *buf, + size_t size, + loff_t *ppos) +{ + struct seq_file *m = (struct seq_file *)file->private_data; + size_t copied = 0; + size_t n; + int err = 0; + + if (!mutex_trylock(&buff_used)) + return -EBUSY; + /* don't allow buffer to change during read */ + mutex_lock(&buff_lock); + if (m->count == 0) { + memset(buf_dirty, 0, buf_size); + if (!m->buf) { + m->size = buf_size; + m->buf = buf_dirty; + } + err = m->op->show(m, NULL); + if (err < 0) + goto done; + } + + /* if buffer changed somehow */ + if (m->size != buf_size) { + mutex_unlock(&buff_lock); + mutex_unlock(&buff_used); + return -EFAULT; + } + + n = min(m->count - m->from, size); + /* check if this is the last read */ + if (n == 0) + goto done; + n -= copy_to_user(buf, m->buf + m->from, n); + if (unlikely(!n)) { + err = -EFAULT; + goto done; + } + m->from += n; + copied += n; +done: + if (!copied) + copied = err; + else + *ppos += copied; + + mutex_unlock(&buff_lock); + mutex_unlock(&buff_used); + return copied; +} + +static void free_buf_dirty(void) +{ + if (buf_dirty != NULL) { + vfree(buf_dirty); + buf_dirty = NULL; + buf_size = 0; + } +} + +static ssize_t write_proc( + struct file *filp, + const char *buf, + size_t count, + loff_t *offp) +{ + char *msg; + int ret = 0; + long old_buff_num; + + if (!mutex_trylock(&buff_used)) + return -EBUSY; + + if (count > PAGE_SIZE) { + ret = -EINVAL; + goto error; + } + + msg = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!msg) { + ret = -ENOMEM; + goto error; + } + + if (copy_from_user(msg, buf, count)) { + ret = -EINVAL; + goto free; + } + old_buff_num = buff_num; + ret = kstrtol(msg, 10, &buff_num); + if (ret != 0 || buff_num < 0 || buff_num > MAX_BUFF_SIZE) { + buff_num = old_buff_num; + ret = -EINVAL; + goto free; + } + + mutex_lock(&buff_lock); + + ret = count; + if (buff_num == 0) { + free_buf_dirty(); + goto out; + } + if (buff_num == old_buff_num) + goto out; + + free_buf_dirty(); + buf_size = PAGE_SIZE * buff_num; + buf_dirty = vzalloc(buf_size); + + if (!buf_dirty) { + ret = -ENOMEM; + goto out; + } +out: + mutex_unlock(&buff_lock); +free: + kfree(msg); +error: + mutex_unlock(&buff_used); + return ret; +} + +static int proc_dpages_open(struct inode *inode, struct file *filp) +{ + if (buf_dirty == NULL || buf_size == 0) { + pr_warn("please allocate buffer before getting dirty pages\n"); + return -ENOMEM; + } + + return single_open(filp, proc_dpages_show, NULL); +} + +static int seq_release_dirty(struct inode *inode, struct file *file) +{ + struct seq_file *m = file->private_data; + + /* we don't want to free the buf */ + m->buf = NULL; + single_release(inode, file); + return 0; +} + +static const struct proc_ops proc_dpages_operations = { + .proc_open = proc_dpages_open, + .proc_read = seq_read_dirty, + .proc_release = seq_release_dirty, +}; + +static int proc_switch_show(struct seq_file *m, void *v) +{ + seq_printf(m, "%ld\n", buff_num); + return 0; +} + +static int proc_limit_show(struct seq_file *m, void *v) +{ + seq_printf(m, "%d\n", READ_ONCE(buff_limit)); + return 0; +} + +static int proc_switch_open(struct inode *inode, struct file *filp) +{ + return single_open(filp, proc_switch_show, NULL); +} + +static int proc_limit_open(struct inode *inode, struct file *filp) +{ + return single_open(filp, proc_limit_show, NULL); +} + +static ssize_t write_limit_proc( + struct file *filp, + const char *buf, + size_t count, + loff_t *offp) +{ + char *msg; + int ret = 0; + long temp; + + if (count > PAGE_SIZE) { + ret = -EINVAL; + goto error; + } + + msg = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!msg) { + ret = -ENOMEM; + goto error; + } + + if (copy_from_user(msg, buf, count)) { + ret = -EINVAL; + goto free; + } + ret = kstrtol(msg, 10, &temp); + if (ret != 0 || temp < 0 || temp > INT_MAX) { + ret = -EINVAL; + goto free; + } + + WRITE_ONCE(buff_limit, temp); + ret = count; + +free: + kfree(msg); +error: + return ret; +} + + +static const struct proc_ops proc_switch_operations = { + .proc_open = proc_switch_open, + .proc_read = seq_read, + .proc_write = write_proc, + .proc_lseek = seq_lseek, + .proc_release = single_release, +}; + +static const struct proc_ops proc_limit_operations = { + .proc_open = proc_limit_open, + .proc_read = seq_read, + .proc_write = write_limit_proc, + .proc_lseek = seq_lseek, + .proc_release = single_release, +}; + + +static int __init dpages_proc_init(void) +{ + static struct proc_dir_entry *proc_file; + + dirty_dir = proc_mkdir(DIRTY_ROOT, NULL); + if (!dirty_dir) + goto fail_dir; + + proc_file = proc_create(DIRTY_PAGES, 0440, + dirty_dir, &proc_dpages_operations); + if (!proc_file) + goto fail_pages; + + proc_file = proc_create(DIRTY_SWITCH, 0640, + dirty_dir, &proc_switch_operations); + if (!proc_file) + goto fail_switch; + + proc_file = proc_create(DIRTY_LIMIT, 0640, + dirty_dir, &proc_limit_operations); + if (!proc_file) + goto fail_limit; + + mutex_init(&buff_used); + mutex_init(&buff_lock); + return 0; + +fail_limit: + remove_proc_entry(DIRTY_SWITCH, dirty_dir); +fail_switch: + remove_proc_entry(DIRTY_PAGES, dirty_dir); +fail_pages: + remove_proc_entry(DIRTY_ROOT, NULL); +fail_dir: + return -ENOMEM; +} + +subsys_initcall(dpages_proc_init); -- 2.39.2

2 1

[PATCH OLK-6.6 00/11] LoongArch: fix some pci problems
by Hongchen Zhang 18 Dec '23

18 Dec '23

Baoqi Zhang (2): LS7A2000: Add quirk for OHCI device rev 0x02 PCI: LS7A2000: fix GPU card error Hongchen Zhang (1): PCI: fix kabi error caused by pm_suspend_target_state Jianmin Lv (2): PCI: PM: fix pcie mrrs restoring PCI: LS7A2000: fix pm transition of devices under pcie port Juxin Gao (1): PCI: irq: Add early_param pci_irq_limit to limit pci irq numbers Tianli Xiong (4): PCI: Check if entry->offset already exist for mem resource PCI: Check if the pci controller can use both CFG0 and CFG1 mode to access configuration space LoongArch: fix some PCIE card not scanning properly LoongArch: pci root bridige set acpi companion only when not acpi_disabled. suijingfeng (1): PCI: fix X server auto probe fail when both ast and etnaviv drm present arch/loongarch/pci/acpi.c | 23 ++-- drivers/pci/controller/pci-loongson.c | 147 +++++++++++++++++++++++++- drivers/pci/msi/msi.c | 25 +++++ drivers/pci/pci.c | 20 +++- 4 files changed, 200 insertions(+), 15 deletions(-) -- 2.33.0

2 12

[PATCH OLK-5.10 00/10] Backport md mainline patch
by Li Nan 18 Dec '23

18 Dec '23

Christoph Hellwig (9): md: extend disks_mutex coverage md: convert to blk_alloc_disk/blk_cleanup_disk md: add the bitmap group to the default groups for the md kobject md: properly unwind when failing to add the kobject in md_alloc md: fix mddev->kobj lifetime md: fix error handling in md_alloc md: factor out a mddev_alloc_unit helper from mddev_find md: refactor mddev_find_or_alloc md: do not return existing mddevs from mddev_find_or_alloc Luis Chamberlain (1): md: add error handling support for add_disk() drivers/md/md.c | 231 +++++++++++++++++++++++++----------------------- 1 file changed, 121 insertions(+), 110 deletions(-) -- 2.39.2

2 11

[PATCH openEuler-1.0-LTS 0/2] Fix data-races around
by Zhengchao Shao 18 Dec '23

18 Dec '23

Fix data-races around sysctl_ip_fwd_update_priority and sysctl_ip_no_pmtu_disc. Kuniyuki Iwashima (2): ip: Fix data-races around sysctl_ip_fwd_update_priority. ip: Fix data-races around sysctl_ip_no_pmtu_disc. drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 3 ++- net/ipv4/af_inet.c | 2 +- net/ipv4/icmp.c | 2 +- net/ipv4/ip_forward.c | 2 +- net/ipv6/af_inet6.c | 2 +- 5 files changed, 6 insertions(+), 5 deletions(-) -- 2.34.1

2 3

[PATCH OLK-6.6 v2] blk-throttle: enable hierarchical throttle in cgroup v1
by Yu Kuai 18 Dec '23

18 Dec '23

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4R7RE CVE: NA ----------------------------------------------- blkio subsytem is not under default hierarchy in cgroup v1 by default, which means configurations will only be effective on current cgroup for io throttle. This patch introduces a new feature that enable default hierarchy for io throttle, which means configurations will be effective on child cgroups. Such feature is disabled by default, and can be enabled by: 1) set CONFIG_BLK_DEV_SUPPORT_LEGACY_GLOBAL_LIMIT, then 2) adding "blkcg_global_limit=1" or "blkcg_global_limit=Y" or "blkcg_global_limit=y" in boot cmd; Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> --- block/Kconfig | 11 +++++++++++ block/blk-throttle.c | 26 +++++++++++++++++++++++++- 2 files changed, 36 insertions(+), 1 deletion(-) diff --git a/block/Kconfig b/block/Kconfig index f1364d1c0d93..95378563a05a 100644 --- a/block/Kconfig +++ b/block/Kconfig @@ -111,6 +111,17 @@ config BLK_DEV_THROTTLING_LOW Note, this is an experimental interface and could be changed someday. +config BLK_DEV_SUPPORT_LEGACY_GLOBAL_LIMIT + bool "Block layer global limit in cgroup v1" + depends on BLK_DEV_THROTTLING + default n + help + Blkio subsytem is not under default hierarchy in cgroup v1 by default, + enabling this will support globlal limit in cgroup v1. + + Note, a cmdline "blkcg_global_limit=1" is still required to enabled this + feature. + config BLK_WBT bool "Enable support for block device writeback throttling" help diff --git a/block/blk-throttle.c b/block/blk-throttle.c index 13e4377a8b28..3a03cb4a1866 100644 --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -41,6 +41,29 @@ /* A workqueue to queue throttle related work */ static struct workqueue_struct *kthrotld_workqueue; +#ifdef CONFIG_BLK_DEV_SUPPORT_LEGACY_GLOBAL_LIMIT +/* True if global limit is enabled in cgroup v1 */ +static bool global_limit; + +static inline bool blkcg_global_limit_enabled(void) +{ + return global_limit; +} + +static int __init setup_global_limit(char *str) +{ + if (!strcmp(str, "1") || !strcmp(str, "Y") || !strcmp(str, "y")) + global_limit = true; + + return 1; +} + +__setup("blkcg_global_limit=", setup_global_limit); + +#else +static inline bool blkcg_global_limit_enabled(void) + return false; +#endif #define rb_entry_tg(node) rb_entry((node), struct throtl_grp, rb_node) /* We measure latency for request size from <= 4k to >= 1M */ @@ -405,7 +428,8 @@ static void throtl_pd_init(struct blkg_policy_data *pd) * regardless of the position of the group in the hierarchy. */ sq->parent_sq = &td->service_queue; - if (cgroup_subsys_on_dfl(io_cgrp_subsys) && blkg->parent) + if ((cgroup_subsys_on_dfl(io_cgrp_subsys) || + blkcg_global_limit_enabled()) && blkg->parent) sq->parent_sq = &blkg_to_tg(blkg->parent)->service_queue; tg->td = td; } -- 2.39.2

2 1

[PATCH OLK-6.6 0/9] Support dynamic affinity scheduler
by Hui Tang 16 Dec '23

16 Dec '23

patch 1~7: Introduce dynamic affinity for cfs scheduler. patch 8~9: Tiny bugfix. Hui Tang (7): sched: Introduce dynamic affinity for cfs scheduler cpuset: Introduce new interface for scheduler dynamic affinity sched: Adjust wakeup cpu range according CPU util dynamicly sched: Adjust cpu allowed in load balance dynamicly sched: Add statistics for scheduler dynamic affinity sched: Add cmdline for dynamic affinity config: enable CONFIG_QOS_SCHED_DYNAMIC_AFFINITY by default zhangwei123171 (2): sched/fair: Remove invalid cpu selection logic in dynamic affinity sched/fair: Modify idle cpu judgment in dynamic affinity arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 73 +++++++++++ include/linux/sched.h | 22 ++++ include/linux/sched/sysctl.h | 3 + init/Kconfig | 10 ++ init/init_task.c | 3 + kernel/cgroup/cpuset.c | 153 ++++++++++++++++++++++- kernel/fork.c | 16 +++ kernel/sched/core.c | 98 +++++++++++++++ kernel/sched/debug.c | 6 + kernel/sched/fair.c | 162 +++++++++++++++++++++++++ kernel/sysctl.c | 11 ++ 13 files changed, 558 insertions(+), 1 deletion(-) -- 2.34.1

2 10

[OLK-6.6 0/9] Support dynamic affinity scheduler
by Hui Tang 16 Dec '23

16 Dec '23

patch 1~7: Introduce dynamic affinity for cfs scheduler. patch 8~9: Tiny bugfix. Hui Tang (7): sched: Introduce dynamic affinity for cfs scheduler cpuset: Introduce new interface for scheduler dynamic affinity sched: Adjust wakeup cpu range according CPU util dynamicly sched: Adjust cpu allowed in load balance dynamicly sched: Add statistics for scheduler dynamic affinity sched: Add cmdline for dynamic affinity config: enable CONFIG_QOS_SCHED_DYNAMIC_AFFINITY by default zhangwei123171 (2): sched/fair: Remove invalid cpu selection logic in dynamic affinity sched/fair: Modify idle cpu judgment in dynamic affinity arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 73 +++++++++++ include/linux/sched.h | 22 ++++ include/linux/sched/sysctl.h | 3 + init/Kconfig | 10 ++ init/init_task.c | 3 + kernel/cgroup/cpuset.c | 153 ++++++++++++++++++++++- kernel/fork.c | 16 +++ kernel/sched/core.c | 98 +++++++++++++++ kernel/sched/debug.c | 6 + kernel/sched/fair.c | 162 +++++++++++++++++++++++++ kernel/sysctl.c | 11 ++ 13 files changed, 558 insertions(+), 1 deletion(-) -- 2.34.1

2 11

[PATCH OLK-6.6] security: restrict init parameters by configuration
by Yi Yang 16 Dec '23

16 Dec '23

From: Xiangyu Lu <luxiangyu(a)huawei.com> euler inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8OYXL CVE: NA --------------------------------- Linux kernel allow to specify a single-user mode, or specify the init process by init parameter, which could bypass the login authentication mechanisms, direct access to root identify. Close init kernel boot parameters through CONFIG_SECURITY_BOOT_INIT. Signed-off-by: Xiangyu Lu <luxiangyu(a)huawei.com> Reviewed-by: Wang Kai <morgan.wang(a)huawei.com> Signed-off-by: Weilong Chen <chenweilong(a)huawei.com> [hj: backport from hulk-3.10 for security enhancement] Signed-off-by: Hanjun Guo <hanjun.guo(a)linaro.org> Signed-off-by: gaobo <gaobo794(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: zhangyi (F) <yi.zhang(a)huawei.com> Acked-by: Xie XiuQi <xiexiuqi(a)huawei.com> Signed-off-by: Chen Jun <chenjun102(a)huawei.com> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- init/main.c | 2 ++ security/Kconfig | 6 ++++++ 2 files changed, 8 insertions(+) diff --git a/init/main.c b/init/main.c index 7bbce78cdccf..ba7da8fe83ea 100644 --- a/init/main.c +++ b/init/main.c @@ -573,6 +573,7 @@ static int __init unknown_bootoption(char *param, char *val, return 0; } +#ifndef CONFIG_SECURITY_BOOT_INIT static int __init init_setup(char *str) { unsigned int i; @@ -601,6 +602,7 @@ static int __init rdinit_setup(char *str) return 1; } __setup("rdinit=", rdinit_setup); +#endif #ifndef CONFIG_SMP static const unsigned int setup_max_cpus = NR_CPUS; diff --git a/security/Kconfig b/security/Kconfig index 52c9af08ad35..9a6b9a115bb9 100644 --- a/security/Kconfig +++ b/security/Kconfig @@ -249,5 +249,11 @@ config LSM source "security/Kconfig.hardening" +config SECURITY_BOOT_INIT + bool "Disable init & rdinit parameters in cmdline" + default n + help + No support init and rdinit parameters in cmdline + endmenu -- 2.25.1

2 1