- Kernel - mailweb.openeuler.org

[PATCH OLK-5.10] net: openvswitch: limit the number of recursions from action sets
by Dong Chenchen 02 Mar '24

02 Mar '24

From: Aaron Conole <aconole(a)redhat.com> stable inclusion from stable-v5.10.209 commit 55cfccb658fc142d7fbfeae2d0496b7841d128c3 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I91L17 CVE: CVE-2024-1151 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 6e2f90d31fe09f2b852de25125ca875aabd81367 ] The ovs module allows for some actions to recursively contain an action list for complex scenarios, such as sampling, checking lengths, etc. When these actions are copied into the internal flow table, they are evaluated to validate that such actions make sense, and these calls happen recursively. The ovs-vswitchd userspace won't emit more than 16 recursion levels deep. However, the module has no such limit and will happily accept limits larger than 16 levels nested. Prevent this by tracking the number of recursions happening and manually limiting it to 16 levels nested. The initial implementation of the sample action would track this depth and prevent more than 3 levels of recursion, but this was removed to support the clone use case, rather than limited at the current userspace limit. Fixes: 798c166173ff ("openvswitch: Optimize sample action for the clone use cases") Signed-off-by: Aaron Conole <aconole(a)redhat.com> Reviewed-by: Simon Horman <horms(a)kernel.org> Link: https://lore.kernel.org/r/20240207132416.1488485-2-aconole@redhat.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Dong Chenchen <dongchenchen2(a)huawei.com> --- net/openvswitch/flow_netlink.c | 49 +++++++++++++++++++++++----------- 1 file changed, 33 insertions(+), 16 deletions(-) diff --git a/net/openvswitch/flow_netlink.c b/net/openvswitch/flow_netlink.c index 293a798e89f4..cff18a5bbf38 100644 --- a/net/openvswitch/flow_netlink.c +++ b/net/openvswitch/flow_netlink.c @@ -47,6 +47,7 @@ struct ovs_len_tbl { #define OVS_ATTR_NESTED -1 #define OVS_ATTR_VARIABLE -2 +#define OVS_COPY_ACTIONS_MAX_DEPTH 16 static bool actions_may_change_flow(const struct nlattr *actions) { @@ -2514,13 +2515,15 @@ static int __ovs_nla_copy_actions(struct net *net, const struct nlattr *attr, const struct sw_flow_key *key, struct sw_flow_actions **sfa, __be16 eth_type, __be16 vlan_tci, - u32 mpls_label_count, bool log); + u32 mpls_label_count, bool log, + u32 depth); static int validate_and_copy_sample(struct net *net, const struct nlattr *attr, const struct sw_flow_key *key, struct sw_flow_actions **sfa, __be16 eth_type, __be16 vlan_tci, - u32 mpls_label_count, bool log, bool last) + u32 mpls_label_count, bool log, bool last, + u32 depth) { const struct nlattr *attrs[OVS_SAMPLE_ATTR_MAX + 1]; const struct nlattr *probability, *actions; @@ -2571,7 +2574,8 @@ static int validate_and_copy_sample(struct net *net, const struct nlattr *attr, return err; err = __ovs_nla_copy_actions(net, actions, key, sfa, - eth_type, vlan_tci, mpls_label_count, log); + eth_type, vlan_tci, mpls_label_count, log, + depth + 1); if (err) return err; @@ -2586,7 +2590,8 @@ static int validate_and_copy_dec_ttl(struct net *net, const struct sw_flow_key *key, struct sw_flow_actions **sfa, __be16 eth_type, __be16 vlan_tci, - u32 mpls_label_count, bool log) + u32 mpls_label_count, bool log, + u32 depth) { const struct nlattr *attrs[OVS_DEC_TTL_ATTR_MAX + 1]; int start, action_start, err, rem; @@ -2619,7 +2624,8 @@ static int validate_and_copy_dec_ttl(struct net *net, return action_start; err = __ovs_nla_copy_actions(net, actions, key, sfa, eth_type, - vlan_tci, mpls_label_count, log); + vlan_tci, mpls_label_count, log, + depth + 1); if (err) return err; @@ -2633,7 +2639,8 @@ static int validate_and_copy_clone(struct net *net, const struct sw_flow_key *key, struct sw_flow_actions **sfa, __be16 eth_type, __be16 vlan_tci, - u32 mpls_label_count, bool log, bool last) + u32 mpls_label_count, bool log, bool last, + u32 depth) { int start, err; u32 exec; @@ -2653,7 +2660,8 @@ static int validate_and_copy_clone(struct net *net, return err; err = __ovs_nla_copy_actions(net, attr, key, sfa, - eth_type, vlan_tci, mpls_label_count, log); + eth_type, vlan_tci, mpls_label_count, log, + depth + 1); if (err) return err; @@ -3022,7 +3030,7 @@ static int validate_and_copy_check_pkt_len(struct net *net, struct sw_flow_actions **sfa, __be16 eth_type, __be16 vlan_tci, u32 mpls_label_count, - bool log, bool last) + bool log, bool last, u32 depth) { const struct nlattr *acts_if_greater, *acts_if_lesser_eq; struct nlattr *a[OVS_CHECK_PKT_LEN_ATTR_MAX + 1]; @@ -3070,7 +3078,8 @@ static int validate_and_copy_check_pkt_len(struct net *net, return nested_acts_start; err = __ovs_nla_copy_actions(net, acts_if_lesser_eq, key, sfa, - eth_type, vlan_tci, mpls_label_count, log); + eth_type, vlan_tci, mpls_label_count, log, + depth + 1); if (err) return err; @@ -3083,7 +3092,8 @@ static int validate_and_copy_check_pkt_len(struct net *net, return nested_acts_start; err = __ovs_nla_copy_actions(net, acts_if_greater, key, sfa, - eth_type, vlan_tci, mpls_label_count, log); + eth_type, vlan_tci, mpls_label_count, log, + depth + 1); if (err) return err; @@ -3111,12 +3121,16 @@ static int __ovs_nla_copy_actions(struct net *net, const struct nlattr *attr, const struct sw_flow_key *key, struct sw_flow_actions **sfa, __be16 eth_type, __be16 vlan_tci, - u32 mpls_label_count, bool log) + u32 mpls_label_count, bool log, + u32 depth) { u8 mac_proto = ovs_key_mac_proto(key); const struct nlattr *a; int rem, err; + if (depth > OVS_COPY_ACTIONS_MAX_DEPTH) + return -EOVERFLOW; + nla_for_each_nested(a, attr, rem) { /* Expected argument lengths, (u32)-1 for variable length. */ static const u32 action_lens[OVS_ACTION_ATTR_MAX + 1] = { @@ -3311,7 +3325,7 @@ static int __ovs_nla_copy_actions(struct net *net, const struct nlattr *attr, err = validate_and_copy_sample(net, a, key, sfa, eth_type, vlan_tci, mpls_label_count, - log, last); + log, last, depth); if (err) return err; skip_copy = true; @@ -3382,7 +3396,7 @@ static int __ovs_nla_copy_actions(struct net *net, const struct nlattr *attr, err = validate_and_copy_clone(net, a, key, sfa, eth_type, vlan_tci, mpls_label_count, - log, last); + log, last, depth); if (err) return err; skip_copy = true; @@ -3396,7 +3410,8 @@ static int __ovs_nla_copy_actions(struct net *net, const struct nlattr *attr, eth_type, vlan_tci, mpls_label_count, - log, last); + log, last, + depth); if (err) return err; skip_copy = true; @@ -3406,7 +3421,8 @@ static int __ovs_nla_copy_actions(struct net *net, const struct nlattr *attr, case OVS_ACTION_ATTR_DEC_TTL: err = validate_and_copy_dec_ttl(net, a, key, sfa, eth_type, vlan_tci, - mpls_label_count, log); + mpls_label_count, log, + depth); if (err) return err; skip_copy = true; @@ -3446,7 +3462,8 @@ int ovs_nla_copy_actions(struct net *net, const struct nlattr *attr, (*sfa)->orig_len = nla_len(attr); err = __ovs_nla_copy_actions(net, attr, key, sfa, key->eth.type, - key->eth.vlan.tci, mpls_label_count, log); + key->eth.vlan.tci, mpls_label_count, log, + 0); if (err) ovs_nla_free_flow_actions(*sfa); -- 2.25.1

2 1

[PATCH OLK-6.6] ext4: regenerate buddy after block freeing failed if under fc replay
by Baokun Li 02 Mar '24

02 Mar '24

mainline inclusion from mainline-v6.8-rc3 commit c9b528c35795b711331ed36dc3dbee90d5812d4e category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I93HD9 CVE: CVE-2024-26601 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- This mostly reverts commit 6bd97bf273bd ("ext4: remove redundant mb_regenerate_buddy()") and reintroduces mb_regenerate_buddy(). Based on code in mb_free_blocks(), fast commit replay can end up marking as free blocks that are already marked as such. This causes corruption of the buddy bitmap so we need to regenerate it in that case. Reported-by: Jan Kara <jack(a)suse.cz> Fixes: 6bd97bf273bd ("ext4: remove redundant mb_regenerate_buddy()") Signed-off-by: Baokun Li <libaokun1(a)huawei.com> Reviewed-by: Jan Kara <jack(a)suse.cz> Link: https://lore.kernel.org/r/20240104142040.2835097-4-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Signed-off-by: Baokun Li <libaokun1(a)huawei.com> --- fs/ext4/mballoc.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index a7b8558c0d09..bbb2410a0724 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -1232,6 +1232,24 @@ void ext4_mb_generate_buddy(struct super_block *sb, atomic64_add(period, &sbi->s_mb_generation_time); } +static void mb_regenerate_buddy(struct ext4_buddy *e4b) +{ + int count; + int order = 1; + void *buddy; + + while ((buddy = mb_find_buddy(e4b, order++, &count))) + mb_set_bits(buddy, 0, count); + + e4b->bd_info->bb_fragments = 0; + memset(e4b->bd_info->bb_counters, 0, + sizeof(*e4b->bd_info->bb_counters) * + (e4b->bd_sb->s_blocksize_bits + 2)); + + ext4_mb_generate_buddy(e4b->bd_sb, e4b->bd_buddy, + e4b->bd_bitmap, e4b->bd_group, e4b->bd_info); +} + /* The buddy information is attached the buddy cache inode * for convenience. The information regarding each group * is loaded via ext4_mb_load_buddy. The information involve @@ -1920,6 +1938,8 @@ static void mb_free_blocks(struct inode *inode, struct ext4_buddy *e4b, ext4_mark_group_bitmap_corrupted( sb, e4b->bd_group, EXT4_GROUP_INFO_BBITMAP_CORRUPT); + } else { + mb_regenerate_buddy(e4b); } goto done; } -- 2.31.1

2 1

[PATCH openEuler-1.0-LTS] Input: appletouch - initialize work before device registration
by Jinjiang Tu 02 Mar '24

02 Mar '24

From: Pavel Skripkin <paskripkin(a)gmail.com> mainline inclusion from mainline-v5.16-rc8 commit 9f3ccdc3f6ef10084ceb3a47df0961bec6196fd0 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I947RI CVE: CVE-2021-46932 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Syzbot has reported warning in __flush_work(). This warning is caused by work->func == NULL, which means missing work initialization. This may happen, since input_dev->close() calls cancel_work_sync(&dev->work), but dev->work initalization happens _after_ input_register_device() call. So this patch moves dev->work initialization before registering input device Fixes: 5a6eb676d3bc ("Input: appletouch - improve powersaving for Geyser3 devices") Reported-and-tested-by: syzbot+b88c5eae27386b252bbd(a)syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin(a)gmail.com> Link: https://lore.kernel.org/r/20211230141151.17300-1-paskripkin@gmail.com Cc: stable(a)vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Jinjiang Tu <tujinjiang(a)huawei.com> --- drivers/input/mouse/appletouch.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index f1e66e257cff..e305a4f2b0f0 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -930,6 +930,8 @@ static int atp_probe(struct usb_interface *iface, set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); set_bit(BTN_LEFT, input_dev->keybit); + INIT_WORK(&dev->work, atp_reinit); + error = input_register_device(dev->input); if (error) goto err_free_buffer; @@ -937,8 +939,6 @@ static int atp_probe(struct usb_interface *iface, /* save our data pointer in this interface device */ usb_set_intfdata(iface, dev); - INIT_WORK(&dev->work, atp_reinit); - return 0; err_free_buffer: -- 2.25.1

2 1

[openeuler:OLK-6.6 2676/3767] rdtgroup.c:undefined reference to `lockdep_is_cpus_held'
by kernel test robot 02 Mar '24

02 Mar '24

Hi James, FYI, the error/warning still remains. tree: https://gitee.com/openeuler/kernel.git OLK-6.6 head: 236cb940335e3542c9d5ac16b5d8546a0cbbdfc1 commit: c054efea286659a6504fdeafc0a611c6a3b124cc [2676/3767] x86/resctrl: Claim get_domain_from_cpu() for resctrl config: x86_64-buildonly-randconfig-004-20240301 (https://download.01.org/0day-ci/archive/20240302/202403021655.4zz3RhBO-lkp@…) compiler: gcc-12 (Debian 12.2.0-14) 12.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240302/202403021655.4zz3RhBO-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202403021655.4zz3RhBO-lkp@intel.com/ All errors (new ones prefixed by >>): ld: arch/x86/kernel/cpu/resctrl/core.o: in function `rdt_ctrl_update': core.c:(.text+0x2561): undefined reference to `lockdep_is_cpus_held' ld: arch/x86/kernel/cpu/resctrl/rdtgroup.o: in function `resctrl_offline_cpu': >> rdtgroup.c:(.text+0x12301): undefined reference to `lockdep_is_cpus_held' ld: arch/x86/kernel/cpu/resctrl/monitor.o: in function `update_mba_bw': monitor.c:(.text+0x31e): undefined reference to `lockdep_is_cpus_held' -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0

[PATCH openEuler-1.0-LTS] Input: powermate - fix use-after-free in powermate_config_complete
by Xiang Yang 02 Mar '24

02 Mar '24

From: Javier Carrasco <javier.carrasco.cruz(a)gmail.com> stable inclusion from stable-v4.19.297 commit 67cace72606baf1758fd60feb358f4c6be92e1cc category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I94PA7 CVE: CVE-2023-52475 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… ----------------------------------------------------- commit 5c15c60e7be615f05a45cd905093a54b11f461bc upstream. syzbot has found a use-after-free bug [1] in the powermate driver. This happens when the device is disconnected, which leads to a memory free from the powermate_device struct. When an asynchronous control message completes after the kfree and its callback is invoked, the lock does not exist anymore and hence the bug. Use usb_kill_urb() on pm->config to cancel any in-progress requests upon device disconnection. [1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e Signed-off-by: Javier Carrasco <javier.carrasco.cruz(a)gmail.com> Reported-by: syzbot+0434ac83f907a1dbdd1e(a)syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20230916-topic-powermate_use_after_free-v3-1-6441… Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Xiang Yang <xiangyang3(a)huawei.com> --- drivers/input/misc/powermate.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c index e8de3aaf9f63..14f48e10f589 100644 --- a/drivers/input/misc/powermate.c +++ b/drivers/input/misc/powermate.c @@ -424,6 +424,7 @@ static void powermate_disconnect(struct usb_interface *intf) pm->requires_update = 0; usb_kill_urb(pm->irq); input_unregister_device(pm->input); + usb_kill_urb(pm->config); usb_free_urb(pm->irq); usb_free_urb(pm->config); powermate_free_buffers(interface_to_usbdev(intf), pm); -- 2.34.1

2 1

[PATCH openEuler-22.03-LTS-SP2] ext4: regenerate buddy after block freeing failed if under fc replay
by Baokun Li 02 Mar '24

02 Mar '24

mainline inclusion from mainline-v6.8-rc3 commit c9b528c35795b711331ed36dc3dbee90d5812d4e category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I93HD9 CVE: CVE-2024-26601 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- This mostly reverts commit 6bd97bf273bd ("ext4: remove redundant mb_regenerate_buddy()") and reintroduces mb_regenerate_buddy(). Based on code in mb_free_blocks(), fast commit replay can end up marking as free blocks that are already marked as such. This causes corruption of the buddy bitmap so we need to regenerate it in that case. Reported-by: Jan Kara <jack(a)suse.cz> Fixes: 6bd97bf273bd ("ext4: remove redundant mb_regenerate_buddy()") Signed-off-by: Baokun Li <libaokun1(a)huawei.com> Reviewed-by: Jan Kara <jack(a)suse.cz> Link: https://lore.kernel.org/r/20240104142040.2835097-4-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Conflicts: fs/ext4/mballoc.c Signed-off-by: Baokun Li <libaokun1(a)huawei.com> --- fs/ext4/mballoc.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 929fc424d68a..cdb443932e3b 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -822,6 +822,24 @@ void ext4_mb_generate_buddy(struct super_block *sb, atomic64_add(period, &sbi->s_mb_generation_time); } +static void mb_regenerate_buddy(struct ext4_buddy *e4b) +{ + int count; + int order = 1; + void *buddy; + + while ((buddy = mb_find_buddy(e4b, order++, &count))) + ext4_set_bits(buddy, 0, count); + + e4b->bd_info->bb_fragments = 0; + memset(e4b->bd_info->bb_counters, 0, + sizeof(*e4b->bd_info->bb_counters) * + (e4b->bd_sb->s_blocksize_bits + 2)); + + ext4_mb_generate_buddy(e4b->bd_sb, e4b->bd_buddy, + e4b->bd_bitmap, e4b->bd_group, e4b->bd_info); +} + /* The buddy information is attached the buddy cache inode * for convenience. The information regarding each group * is loaded via ext4_mb_load_buddy. The information involve @@ -1504,6 +1522,8 @@ static void mb_free_blocks(struct inode *inode, struct ext4_buddy *e4b, ext4_mark_group_bitmap_corrupted( sb, e4b->bd_group, EXT4_GROUP_INFO_BBITMAP_CORRUPT); + } else { + mb_regenerate_buddy(e4b); } goto done; } -- 2.31.1

2 1

[openeuler:OLK-6.6 780/3767] arch/loongarch/kernel/dma.c:37:42: sparse: sparse: incorrect type in argument 1 (different address spaces)
by kernel test robot 02 Mar '24

02 Mar '24

tree: https://gitee.com/openeuler/kernel.git OLK-6.6 head: fbcd4a3032a53350f6d182c9daeaa4c46e65d964 commit: 90d2bbc1ade2216bda17fb582a1aaabf7567478f [780/3767] LoongArch: use arch specific phys_to_dma config: loongarch-randconfig-r112-20240302 (https://download.01.org/0day-ci/archive/20240302/202403021652.crccT6al-lkp@…) compiler: loongarch64-linux-gcc (GCC) 13.2.0 reproduce: (https://download.01.org/0day-ci/archive/20240302/202403021652.crccT6al-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202403021652.crccT6al-lkp@intel.com/ sparse warnings: (new ones prefixed by >>) >> arch/loongarch/kernel/dma.c:37:42: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void const volatile [noderef] __iomem *addr @@ got void volatile * @@ arch/loongarch/kernel/dma.c:37:42: sparse: expected void const volatile [noderef] __iomem *addr arch/loongarch/kernel/dma.c:37:42: sparse: got void volatile * vim +37 arch/loongarch/kernel/dma.c 29 30 void acpi_arch_dma_setup(struct device *dev) 31 { 32 int ret; 33 u64 mask, end = 0; 34 const struct bus_dma_region *map = NULL; 35 36 if (node_id_offset == 0) { > 37 node_id_offset = ((readl(LS7A_DMA_CFG) & LS7A_DMA_NODE_MASK) >> LS7A_DMA_NODE_SHF); 38 node_id_offset += 36; 39 } 40 41 ret = acpi_dma_get_range(dev, &map); 42 if (!ret && map) { 43 const struct bus_dma_region *r = map; 44 45 for (end = 0; r->size; r++) { 46 if (r->dma_start + r->size - 1 > end) 47 end = r->dma_start + r->size - 1; 48 } 49 50 mask = DMA_BIT_MASK(ilog2(end) + 1); 51 dev->bus_dma_limit = end; 52 dev->dma_range_map = map; 53 dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask); 54 *dev->dma_mask = min(*dev->dma_mask, mask); 55 } 56 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0

[PATCH openEuler-1.0-LTS] i2c: cadence: fix reference leak when pm_runtime_get_sync fails
by Jinjiang Tu 02 Mar '24

02 Mar '24

From: Qinglang Miao <miaoqinglang(a)huawei.com> mainline inclusion from mainline-v5.13-rc1 commit 23ceb8462dc6f4b4decdb5536a7e5fc477cdf0b6 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I94JHY CVE: CVE-2020-36784 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- The PM reference count is not expected to be incremented on return in functions cdns_i2c_master_xfer and cdns_reg_slave. However, pm_runtime_get_sync will increment pm usage counter even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 7fa32329ca03 ("i2c: cadence: Move to sensible power management") Reported-by: Hulk Robot <hulkci(a)huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang(a)huawei.com> Signed-off-by: Wolfram Sang <wsa(a)kernel.org> Conflicts: drivers/i2c/busses/i2c-cadence.c Signed-off-by: Jinjiang Tu <tujinjiang(a)huawei.com> --- drivers/i2c/busses/i2c-cadence.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index d917cefc5a19..f64c7f8b924e 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -578,7 +578,7 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, struct cdns_i2c *id = adap->algo_data; bool hold_quirk; - ret = pm_runtime_get_sync(id->dev); + ret = pm_runtime_resume_and_get(id->dev); if (ret < 0) return ret; /* Check if the bus is free */ -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS] usb: dwc3: core: Do core softreset when switch mode
by Zhang Xiaoxu 02 Mar '24

02 Mar '24

From: Yu Chen <chenyu56(a)huawei.com> mainline inclusion from mainline-v5.13-rc1 commit f88359e1588b85cf0e8209ab7d6620085f3441d9 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I949BN CVE: CVE-2021-46941 --------------------------- From: John Stultz <john.stultz(a)linaro.org> According to the programming guide, to switch mode for DRD controller, the driver needs to do the following. To switch from device to host: 1. Reset controller with GCTL.CoreSoftReset 2. Set GCTL.PrtCapDir(host mode) 3. Reset the host with USBCMD.HCRESET 4. Then follow up with the initializing host registers sequence To switch from host to device: 1. Reset controller with GCTL.CoreSoftReset 2. Set GCTL.PrtCapDir(device mode) 3. Reset the device with DCTL.CSftRst 4. Then follow up with the initializing registers sequence Currently we're missing step 1) to do GCTL.CoreSoftReset and step 3) of switching from host to device. John Stult reported a lockup issue seen with HiKey960 platform without these steps[1]. Similar issue is observed with Ferry's testing platform[2]. So, apply the required steps along with some fixes to Yu Chen's and John Stultz's version. The main fixes to their versions are the missing wait for clocks synchronization before clearing GCTL.CoreSoftReset and only apply DCTL.CSftRst when switching from host to device. [1] https://lore.kernel.org/linux-usb/20210108015115.27920-1-john.stultz@linaro… [2] https://lore.kernel.org/linux-usb/0ba7a6ba-e6a7-9cd4-0695-64fc927e01f1@gmai… Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly") Cc: Andy Shevchenko <andy.shevchenko(a)gmail.com> Cc: Ferry Toth <fntoth(a)gmail.com> Cc: Wesley Cheng <wcheng(a)codeaurora.org> Cc: <stable(a)vger.kernel.org> Tested-by: John Stultz <john.stultz(a)linaro.org> Tested-by: Wesley Cheng <wcheng(a)codeaurora.org> Signed-off-by: Yu Chen <chenyu56(a)huawei.com> Signed-off-by: John Stultz <john.stultz(a)linaro.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen(a)synopsys.com> Link: https://lore.kernel.org/r/374440f8dcd4f06c02c2caf4b1efde86774e02d9.16185216… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> Conflicts: drivers/usb/dwc3/core.c --- drivers/usb/dwc3/core.c | 37 +++++++++++++++++++++++++++++++++---- drivers/usb/dwc3/core.h | 5 +++++ 2 files changed, 38 insertions(+), 4 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index f52fcbc5c971..3f605ca8a8c3 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -111,26 +111,31 @@ void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode) dwc->current_dr_role = mode; } +static int dwc3_core_soft_reset(struct dwc3 *dwc); + static void __dwc3_set_mode(struct work_struct *work) { struct dwc3 *dwc = work_to_dwc(work); unsigned long flags; int ret; + u32 reg; + + mutex_lock(&dwc->mutex); if (dwc->dr_mode != USB_DR_MODE_OTG) - return; + goto out; if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_OTG) dwc3_otg_update(dwc, 0); if (!dwc->desired_dr_role) - return; + goto out; if (dwc->desired_dr_role == dwc->current_dr_role) - return; + goto out; if (dwc->desired_dr_role == DWC3_GCTL_PRTCAP_OTG && dwc->edev) - return; + goto out; switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_HOST: @@ -151,6 +156,25 @@ static void __dwc3_set_mode(struct work_struct *work) break; } + /* For DRD host or device mode only */ + if (dwc->desired_dr_role != DWC3_GCTL_PRTCAP_OTG) { + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + reg |= DWC3_GCTL_CORESOFTRESET; + dwc3_writel(dwc->regs, DWC3_GCTL, reg); + + /* + * Wait for internal clocks to synchronized. DWC_usb31 and + * DWC_usb32 may need at least 50ms (less for DWC_usb3). To + * keep it consistent across different IPs, let's wait up to + * 100ms before clearing GCTL.CORESOFTRESET. + */ + msleep(100); + + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + reg &= ~DWC3_GCTL_CORESOFTRESET; + dwc3_writel(dwc->regs, DWC3_GCTL, reg); + } + spin_lock_irqsave(&dwc->lock, flags); dwc3_set_prtcap(dwc, dwc->desired_dr_role); @@ -171,6 +195,8 @@ static void __dwc3_set_mode(struct work_struct *work) } break; case DWC3_GCTL_PRTCAP_DEVICE: + dwc3_core_soft_reset(dwc); + dwc3_event_buffers_setup(dwc); if (dwc->usb2_phy) @@ -190,6 +216,8 @@ static void __dwc3_set_mode(struct work_struct *work) break; } +out: + mutex_unlock(&dwc->mutex); } void dwc3_set_mode(struct dwc3 *dwc, u32 mode) @@ -1453,6 +1481,7 @@ static int dwc3_probe(struct platform_device *pdev) dwc3_cache_hwparams(dwc); spin_lock_init(&dwc->lock); + mutex_init(&dwc->mutex); pm_runtime_set_active(dev); pm_runtime_use_autosuspend(dev); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 131028501752..a5d3004ae388 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -13,6 +13,7 @@ #include <linux/device.h> #include <linux/spinlock.h> +#include <linux/mutex.h> #include <linux/ioport.h> #include <linux/list.h> #include <linux/bitops.h> @@ -896,6 +897,7 @@ struct dwc3_scratchpad_array { * @scratch_addr: dma address of scratchbuf * @ep0_in_setup: one control transfer is completed and enter setup phase * @lock: for synchronizing + * @mutex: for mode switching * @dev: pointer to our struct device * @sysdev: pointer to the DMA-capable device * @xhci: pointer to our xHCI child @@ -1017,6 +1019,9 @@ struct dwc3 { /* device lock */ spinlock_t lock; + /* mode switching lock */ + struct mutex mutex; + struct device *dev; struct device *sysdev; -- 2.34.1

2 1

[PATCH OLK-5.10] ext4: regenerate buddy after block freeing failed if under fc replay
by Baokun Li 02 Mar '24

02 Mar '24

mainline inclusion from mainline-v6.8-rc3 commit c9b528c35795b711331ed36dc3dbee90d5812d4e category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I93HD9 CVE: CVE-2024-26601 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- This mostly reverts commit 6bd97bf273bd ("ext4: remove redundant mb_regenerate_buddy()") and reintroduces mb_regenerate_buddy(). Based on code in mb_free_blocks(), fast commit replay can end up marking as free blocks that are already marked as such. This causes corruption of the buddy bitmap so we need to regenerate it in that case. Reported-by: Jan Kara <jack(a)suse.cz> Fixes: 6bd97bf273bd ("ext4: remove redundant mb_regenerate_buddy()") Signed-off-by: Baokun Li <libaokun1(a)huawei.com> Reviewed-by: Jan Kara <jack(a)suse.cz> Link: https://lore.kernel.org/r/20240104142040.2835097-4-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Conflicts: fs/ext4/mballoc.c Signed-off-by: Baokun Li <libaokun1(a)huawei.com> --- fs/ext4/mballoc.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index bc25bdbcb01e..5d68204070e4 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -822,6 +822,24 @@ void ext4_mb_generate_buddy(struct super_block *sb, atomic64_add(period, &sbi->s_mb_generation_time); } +static void mb_regenerate_buddy(struct ext4_buddy *e4b) +{ + int count; + int order = 1; + void *buddy; + + while ((buddy = mb_find_buddy(e4b, order++, &count))) + ext4_set_bits(buddy, 0, count); + + e4b->bd_info->bb_fragments = 0; + memset(e4b->bd_info->bb_counters, 0, + sizeof(*e4b->bd_info->bb_counters) * + (e4b->bd_sb->s_blocksize_bits + 2)); + + ext4_mb_generate_buddy(e4b->bd_sb, e4b->bd_buddy, + e4b->bd_bitmap, e4b->bd_group, e4b->bd_info); +} + /* The buddy information is attached the buddy cache inode * for convenience. The information regarding each group * is loaded via ext4_mb_load_buddy. The information involve @@ -1504,6 +1522,8 @@ static void mb_free_blocks(struct inode *inode, struct ext4_buddy *e4b, ext4_mark_group_bitmap_corrupted( sb, e4b->bd_group, EXT4_GROUP_INFO_BBITMAP_CORRUPT); + } else { + mb_regenerate_buddy(e4b); } goto done; } -- 2.31.1

2 1