- Kernel - mailweb.openeuler.org

[PATCH openEuler-5.10 1/5] arm64: fix a concurrency issue in emulation_proc_handler()
by Zheng Zengkai 13 Dec '22

13 Dec '22

From: ruanjinjie <ruanjinjie(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I65RG3?from=project-issue CVE: NA ------------------------------- In emulation_proc_handler(), read and write operations are performed on insn->current_mode. In the concurrency scenario, mutex only protects writing insn->current_mode, and not protects the read. Suppose there are two concurrent tasks, task1 updates insn->current_mode to INSN_EMULATE in the critical section, the prev_mode of task2 is still the old data INSN_UNDEF of insn->current_mode. As a result, two tasks call update_insn_emulation_mode twice with prev_mode = INSN_UNDEF and current_mode = INSN_EMULATE, then call register_emulation_hooks twice, resulting in a list_add double problem. Call trace: __list_add_valid+0xd8/0xe4 register_undef_hook+0x94/0x13c update_insn_emulation_mode+0xd0/0x12c emulation_proc_handler+0xd8/0xf4 proc_sys_call_handler+0x140/0x250 proc_sys_write+0x1c/0x2c new_sync_write+0xec/0x18c vfs_write+0x214/0x2ac ksys_write+0x70/0xfc __arm64_sys_write+0x24/0x30 el0_svc_common.constprop.0+0x7c/0x1bc do_el0_svc+0x2c/0x94 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb4 el0_sync+0x160/0x180 Fixes: fcddf02ab0da ("arm64: fix oops in concurrently setting insn_emulation sysctls") Signed-off-by: ruanjinjie <ruanjinjie(a)huawei.com> Reviewed-by: Liao Chang <liaochang1(a)huawei.com> Reviewed-by: Zhang Jianhua <chris.zjh(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> --- arch/arm64/kernel/armv8_deprecated.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c index 4a0ba2800e45..ab955c249f37 100644 --- a/arch/arm64/kernel/armv8_deprecated.c +++ b/arch/arm64/kernel/armv8_deprecated.c @@ -208,10 +208,12 @@ static int emulation_proc_handler(struct ctl_table *table, int write, loff_t *ppos) { int ret = 0; - struct insn_emulation *insn = container_of(table->data, struct insn_emulation, current_mode); - enum insn_emulation_mode prev_mode = insn->current_mode; + struct insn_emulation *insn; + enum insn_emulation_mode prev_mode; mutex_lock(&insn_emulation_mutex); + insn = container_of(table->data, struct insn_emulation, current_mode); + prev_mode = insn->current_mode; ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos); if (ret || !write || prev_mode == insn->current_mode) -- 2.20.1

1 4

[PATCH openEuler-5.10-LTS 01/23] mm/dynamic_hugetlb: fix compound_nr incorrect
by Zheng Zengkai 13 Dec '22

13 Dec '22

From: Liu Shixin <liushixin2(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I641XX CVE: NA -------------------------------- Patch 1378a5ee451a ("mm: store compound_nr as well as compound_order") add a new member compound_nr in struct page, and use this new member insteal of compound_order in hugetlb_cgroup_move_parent() to compute the nr_pages. In free_hugepage_to_hugetlb(), we reset page->mapping to NULL for each subpage. Since page->mapping and page->compound_nr is union, we reset page->compound_nr too unexpectly. This will finally result the nr_pages incorrect in hugetlb_cgroup_move_parent() and can't release hugetlb_cgroup. Fix this problem by reset page->compound_nr using set_compound_order(). Signed-off-by: Liu Shixin <liushixin2(a)huawei.com> Reviewed-by: Nanyong Sun <sunnanyong(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> --- mm/dynamic_hugetlb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/dynamic_hugetlb.c b/mm/dynamic_hugetlb.c index eb9b528b73de..8a985d816c07 100644 --- a/mm/dynamic_hugetlb.c +++ b/mm/dynamic_hugetlb.c @@ -799,7 +799,8 @@ static int free_hugepage_to_hugetlb(struct dhugetlb_pool *hpool) p->mapping = NULL; } set_compound_page_dtor(page, HUGETLB_PAGE_DTOR); - + /* compound_nr and mapping are union in page, reset it. */ + set_compound_order(page, PUD_SHIFT - PAGE_SHIFT); nid = page_to_nid(page); SetHPageFreed(page); list_move(&page->lru, &h->hugepage_freelists[nid]); -- 2.20.1

1 22

openEuler Kernel SIG双周例会
by openEuler conference 13 Dec '22

13 Dec '22

您好！ Kernel SIG 邀请您参加 2022-12-16 14:00 召开的Zoom会议(自动录制) 会议主题：openEuler Kernel SIG双周例会会议内容： 1. 进展update 2. 议题征集中欢迎大家积极申报议题（新增议题可以回复邮件反馈，或者录入会议看板）会议链接：https://us06web.zoom.us/j/83523573625?pwd=Z0QvZU5la2I5emh5NzRlemkwT1krZz09 会议纪要：https://etherpad.openeuler.org/p/Kernel-meetings 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler Kernel SIG invites you to attend the Zoom conference(auto recording) will be held at 2022-12-16 14:00, The subject of the conference is openEuler Kernel SIG双周例会, Summary: 1. 进展update 2. 议题征集中欢迎大家积极申报议题（新增议题可以回复邮件反馈，或者录入会议看板） You can join the meeting at https://us06web.zoom.us/j/83523573625?pwd=Z0QvZU5la2I5emh5NzRlemkwT1krZz09. Add topics at https://etherpad.openeuler.org/p/Kernel-meetings. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

[PATCH openEuler-5.10-LTS 001/141] Revert "block/wbt: fix negative inflight counter when remove scsi device"
by Zheng Zengkai 13 Dec '22

13 Dec '22

From: Li Nan <linan122(a)huawei.com> hulk inclusion category: bugfix bugzilla: 187584, https://gitee.com/openeuler/kernel/issues/I5QW2R CVE: NA -------------------------------- This reverts commit 36f5d7662495aa5ad4ec197443e69e01384eda3c. There are two wbt_enable_default() in bfq_exit_queue(). Although it will not lead to no fault, revert one. Signed-off-by: Li Nan <linan122(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> --- block/bfq-iosched.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c index 4bfea5e5354e..1aec01c0a707 100644 --- a/block/bfq-iosched.c +++ b/block/bfq-iosched.c @@ -6418,8 +6418,6 @@ static void bfq_exit_queue(struct elevator_queue *e) spin_unlock_irq(&bfqd->lock); #endif - wbt_enable_default(bfqd->queue); - kfree(bfqd); /* Re-enable throttling in case elevator disabled it */ -- 2.20.1

3 142

[PATCH openEuler-1.0-LTS 1/3] USB: add usb_control_msg_send() and usb_control_msg_recv()
by Yongqiang Liu 13 Dec '22

13 Dec '22

From: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> mainline inclusion from mainline-v5.10-rc1 commit 719b8f2850d3d9b863cc5e4f08e9ef0206e45b26 category: bugfix bugzilla: 188090, https://gitee.com/src-openeuler/kernel/issues/I6068W CVE: CVE-2022-3903 -------------------------------- New core functions to make sending/receiving USB control messages easier and saner. In discussions, it turns out that the large majority of users of usb_control_msg() do so in potentially incorrect ways. The most common issue is where a "short" message is received, yet never detected properly due to "incorrect" error handling. Handle all of this in the USB core with two new functions to try to make working with USB control messages simpler. No more need for dynamic data, messages can be on the stack, and only "complete" send/receive will work without causing an error. Link: https://lore.kernel.org/r/20200914153756.3412156-3-gregkh@linuxfoundation.o… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> The parts related to usb_control_msg_send() and usb_control_msg_recv() in commit USB: correct API of usb_control_msg_send/recv are added to solve CVE. Commit USB: core: drop pipe-type check from new control-message helpers is also added. Signed-off-by: Zhang Peng <zhangpeng362(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/usb/core/message.c | 134 +++++++++++++++++++++++++++++++++++++ include/linux/usb.h | 8 +++ 2 files changed, 142 insertions(+) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index fcf84bfc08e3..0be20b17e754 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -161,6 +161,140 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, } EXPORT_SYMBOL_GPL(usb_control_msg); +/** + * usb_control_msg_send - Builds a control "send" message, sends it off and waits for completion + * @dev: pointer to the usb device to send the message to + * @endpoint: endpoint to send the message to + * @request: USB message request value + * @requesttype: USB message request type value + * @value: USB message value + * @index: USB message index value + * @driver_data: pointer to the data to send + * @size: length in bytes of the data to send + * @timeout: time in msecs to wait for the message to complete before timing + * out (if 0 the wait is forever) + * @memflags: the flags for memory allocation for buffers + * + * Context: !in_interrupt () + * + * This function sends a control message to a specified endpoint that is not + * expected to fill in a response (i.e. a "send message") and waits for the + * message to complete, or timeout. + * + * Do not use this function from within an interrupt context. If you need + * an asynchronous message, or need to send a message from within interrupt + * context, use usb_submit_urb(). If a thread in your driver uses this call, + * make sure your disconnect() method can wait for it to complete. Since you + * don't have a handle on the URB used, you can't cancel the request. + * + * The data pointer can be made to a reference on the stack, or anywhere else, + * as it will not be modified at all. This does not have the restriction that + * usb_control_msg() has where the data pointer must be to dynamically allocated + * memory (i.e. memory that can be successfully DMAed to a device). + * + * Return: If successful, 0 is returned, Otherwise, a negative error number. + */ +int usb_control_msg_send(struct usb_device *dev, __u8 endpoint, __u8 request, + __u8 requesttype, __u16 value, __u16 index, + const void *driver_data, __u16 size, int timeout, + gfp_t memflags) +{ + unsigned int pipe = usb_sndctrlpipe(dev, endpoint); + int ret; + u8 *data = NULL; + + if (size) { + data = kmemdup(driver_data, size, memflags); + if (!data) + return -ENOMEM; + } + + ret = usb_control_msg(dev, pipe, request, requesttype, value, index, + data, size, timeout); + kfree(data); + + if (ret < 0) + return ret; + if (ret == size) + return 0; + return -EINVAL; +} +EXPORT_SYMBOL_GPL(usb_control_msg_send); + +/** + * usb_control_msg_recv - Builds a control "receive" message, sends it off and waits for completion + * @dev: pointer to the usb device to send the message to + * @endpoint: endpoint to send the message to + * @request: USB message request value + * @requesttype: USB message request type value + * @value: USB message value + * @index: USB message index value + * @driver_data: pointer to the data to be filled in by the message + * @size: length in bytes of the data to be received + * @timeout: time in msecs to wait for the message to complete before timing + * out (if 0 the wait is forever) + * @memflags: the flags for memory allocation for buffers + * + * Context: !in_interrupt () + * + * This function sends a control message to a specified endpoint that is + * expected to fill in a response (i.e. a "receive message") and waits for the + * message to complete, or timeout. + * + * Do not use this function from within an interrupt context. If you need + * an asynchronous message, or need to send a message from within interrupt + * context, use usb_submit_urb(). If a thread in your driver uses this call, + * make sure your disconnect() method can wait for it to complete. Since you + * don't have a handle on the URB used, you can't cancel the request. + * + * The data pointer can be made to a reference on the stack, or anywhere else + * that can be successfully written to. This function does not have the + * restriction that usb_control_msg() has where the data pointer must be to + * dynamically allocated memory (i.e. memory that can be successfully DMAed to a + * device). + * + * The "whole" message must be properly received from the device in order for + * this function to be successful. If a device returns less than the expected + * amount of data, then the function will fail. Do not use this for messages + * where a variable amount of data might be returned. + * + * Return: If successful, 0 is returned, Otherwise, a negative error number. + */ +int usb_control_msg_recv(struct usb_device *dev, __u8 endpoint, __u8 request, + __u8 requesttype, __u16 value, __u16 index, + void *driver_data, __u16 size, int timeout, + gfp_t memflags) +{ + unsigned int pipe = usb_rcvctrlpipe(dev, endpoint); + int ret; + u8 *data; + + if (!size || !driver_data) + return -EINVAL; + + data = kmalloc(size, memflags); + if (!data) + return -ENOMEM; + + ret = usb_control_msg(dev, pipe, request, requesttype, value, index, + data, size, timeout); + + if (ret < 0) + goto exit; + + if (ret == size) { + memcpy(driver_data, data, size); + ret = 0; + } else { + ret = -EINVAL; + } + +exit: + kfree(data); + return ret; +} +EXPORT_SYMBOL_GPL(usb_control_msg_recv); + /** * usb_interrupt_msg - Builds an interrupt urb, sends it off and waits for completion * @usb_dev: pointer to the usb device to send the message to diff --git a/include/linux/usb.h b/include/linux/usb.h index ff010d1fd1c7..3e1e31f73d0e 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1783,6 +1783,14 @@ extern int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, int timeout); /* wrappers around usb_control_msg() for the most common standard requests */ +int usb_control_msg_send(struct usb_device *dev, __u8 endpoint, __u8 request, + __u8 requesttype, __u16 value, __u16 index, + const void *data, __u16 size, int timeout, + gfp_t memflags); +int usb_control_msg_recv(struct usb_device *dev, __u8 endpoint, __u8 request, + __u8 requesttype, __u16 value, __u16 index, + void *data, __u16 size, int timeout, + gfp_t memflags); extern int usb_get_descriptor(struct usb_device *dev, unsigned char desctype, unsigned char descindex, void *buf, int size); extern int usb_get_status(struct usb_device *dev, -- 2.25.1

1 2

22.03LTS加入补丁的原则
by Guoqing Jiang 12 Dec '22

12 Dec '22

Hi All, 最近我发现openEuler-22.03-LTS分支加入了大量新特性的补丁, 比如ksmbd, coresight和LoongArch. 这是否意味着除了fix相关的补丁,openEuler LTS版本是可以加入新特性补丁? Thanks, Guoqing

3 4

[PATCH openEuler-5.10 1/7] ide-cd: don't clear rq_flags after blk_get_request
by Zheng Zengkai 12 Dec '22

12 Dec '22

From: Yu Kuai <yukuai3(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I65K8D CVE: NA -------------------------------- Prepare to add a flag while initializing request, there are no functional changes. Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> --- drivers/ide/ide-cd_ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/ide-cd_ioctl.c b/drivers/ide/ide-cd_ioctl.c index 46f2df288c6a..932c4be4c88c 100644 --- a/drivers/ide/ide-cd_ioctl.c +++ b/drivers/ide/ide-cd_ioctl.c @@ -298,7 +298,7 @@ int ide_cdrom_reset(struct cdrom_device_info *cdi) rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, 0); ide_req(rq)->type = ATA_PRIV_MISC; - rq->rq_flags = RQF_QUIET; + rq->rq_flags |= RQF_QUIET; blk_execute_rq(drive->queue, cd->disk, rq, 0); ret = scsi_req(rq)->result ? -EIO : 0; blk_put_request(rq); -- 2.20.1

1 6

[PATCH openEuler-5.10] iommu: Fix error handling in probe_acpi_namespace_devices()
by Zheng Zengkai 12 Dec '22

12 Dec '22

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I65QZY -------------------------------- Fix smatch error in probe_acpi_namespace_devices(). In probe_acpi_namespace_devices(), if device_to_iommu() returns NULL, unlock operation is needed before return. Fixes: d660222861c4 ("iommu/vt-d:Add support for detecting ACPI device, in RMRR") Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> Reviewed-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> --- drivers/iommu/intel/iommu.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 9e14cf9d875f..a1e56413600a 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -4995,8 +4995,10 @@ static int __init probe_acpi_namespace_devices(void) } iommu = device_to_iommu(dev, &bus, &devfn); - if (!iommu) - return -ENODEV; + if (!iommu) { + ret = -ENODEV; + goto unlock; + } info = dmar_search_domain_by_dev_info(iommu->segment, bus, devfn); if (!info) { pn->dev->bus->iommu_ops = &intel_iommu_ops; @@ -5011,8 +5013,10 @@ static int __init probe_acpi_namespace_devices(void) } if (!pn_dev) { iommu = device_to_iommu(dev, &bus, &devfn); - if (!iommu) - return -ENODEV; + if (!iommu) { + ret = -ENODEV; + goto unlock; + } info = dmar_search_domain_by_dev_info(iommu->segment, bus, devfn); if (!info) { dev->bus->iommu_ops = &intel_iommu_ops; -- 2.20.1

1 0

[PATCH openEuler-22.03-LTS] List: add info for debugging list
by Wang ShaoBo 10 Dec '22

10 Dec '22

Signed-off-by: Wang ShaoBo <bobo.shaobowang(a)huawei.com> --- include/linux/list.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/include/linux/list.h b/include/linux/list.h index a18c87b63376..b858dc1ce663 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -7,6 +7,7 @@ #include <linux/poison.h> #include <linux/const.h> #include <linux/kernel.h> +#include <asm/bug.h> /* * Simple doubly linked list implementation. @@ -71,6 +72,17 @@ static inline void __list_add(struct list_head *new, new->next = next; new->prev = prev; WRITE_ONCE(prev->next, new); + + WARN_ON(next->prev != new); + WARN_ON(new->next != next); + WARN_ON(new->prev != prev); + WARN_ON(prev->next != new); + wmb(); + mb(); + WARN_ON(next->prev != new); + WARN_ON(new->next != next); + WARN_ON(new->prev != prev); + WARN_ON(prev->next != new); } /** @@ -111,6 +123,13 @@ static inline void __list_del(struct list_head * prev, struct list_head * next) { next->prev = prev; WRITE_ONCE(prev->next, next); + + WARN_ON(next->prev != prev); + WARN_ON(prev->next != next); + wmb(); + mb(); + WARN_ON(next->prev != prev); + WARN_ON(prev->next != next); } /* -- 2.25.1

1 0

[PATCH openEuler-22.03-LTS 0/2] add debug info
by Wang ShaoBo 09 Dec '22

09 Dec '22

add debug info Wang ShaoBo (1): waitqueue: add info for debugging Yu Liao (1): timer: add info for debugging include/linux/dwait.h | 6 +++++ kernel/sched/wait.c | 39 +++++++++++++++++++++++++++++ kernel/time/timer.c | 8 ++++++ lib/list_debug.c | 57 +++++++++++++++++++++++++++++++++++++++---- 4 files changed, 105 insertions(+), 5 deletions(-) create mode 100644 include/linux/dwait.h -- 2.25.1

1 2