- Kernel - mailweb.openeuler.org

[PATCH OLK-6.6] drm/amd/display: Fix && vs || typos
by Xinyu Zheng 11 Jul '25

11 Jul '25

From: Dan Carpenter <dan.carpenter(a)linaro.org> mainline inclusion from mainline-v6.8-rc5 commit 17ba9cde11c2bfebbd70867b0a2ac4a22e573379 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/ICLMKW Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- These ANDs should be ORs or it will lead to a NULL dereference. Fixes: 45716b01839a ("drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'") Fixes: 2de9bab01e39 ("drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'") Reviewed-by: Anthony Koo <anthony.koo(a)amd.com> Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org> Signed-off-by: Hamza Mahfooz <hamza.mahfooz(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Conflicts: drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hwseq.c drivers/gpu/drm/amd/display/dc/hwss/dcn21/dcn21_hwseq.c [lc: adjust context] Signed-off-by: Xinyu Zheng <zhengxinyu6(a)huawei.com> --- drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hwseq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hwseq.c index 840dfd237247..990374857d9a 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hwseq.c @@ -211,7 +211,7 @@ void dcn21_set_pipe(struct pipe_ctx *pipe_ctx) struct dmcu *dmcu = pipe_ctx->stream->ctx->dc->res_pool->dmcu; uint32_t otg_inst; - if (!abm && !tg && !panel_cntl) + if (!abm || !tg || !panel_cntl) return; otg_inst = tg->inst; @@ -245,7 +245,7 @@ bool dcn21_set_backlight_level(struct pipe_ctx *pipe_ctx, struct panel_cntl *panel_cntl = pipe_ctx->stream->link->panel_cntl; uint32_t otg_inst; - if (!abm && !tg && !panel_cntl) + if (!abm || !tg || !panel_cntl) return false; otg_inst = tg->inst; -- 2.34.1

2 1

[PATCH OLK-6.6 0/6] hns3: Fix debugfs inconsistency and optimize driver code (stack usage, timer init, readability)
by huangdonghua 11 Jul '25

11 Jul '25

This patchset fixes debugfs query inconsistencies and optimizes the hns3 driver by reducing stack usage, improving timer initialization, and enhancing array handling readability. These changes improve the reliability and maintainability of the hns3 networking driver. Arnd Bergmann (1): net: hns3: reduce stack usage in hclge_dbg_dump_tm_pri() Hao Lan (1): net: hns3: Resolved the issue that the debugfs query result is inconsistent. Jian Shen (1): net: hns3: initialize reset_timer before hclgevf_misc_irq_init() Zhang Zekun (1): net: hns3: Use ARRAY_SIZE() to improve readability huangdonghua (2): Revert "net: hns3: initialize reset_timer before hclgevf_misc_irq_init()" Revert "net: hns3: Resolved the issue that the debugfs query result is inconsistent." drivers/net/ethernet/hisilicon/hns3/hnae3.h | 3 - .../ethernet/hisilicon/hns3/hns3_debugfs.c | 98 ++++++------------- .../hisilicon/hns3/hns3pf/hclge_debugfs.c | 21 ++-- .../hisilicon/hns3/hns3vf/hclgevf_main.c | 2 + .../hisilicon/hns3/hns3vf/hclgevf_regs.c | 8 +- 5 files changed, 51 insertions(+), 81 deletions(-) -- 2.33.0

2 7

[PATCH OLK-6.6] serial: Fix potential null-ptr-deref in mlb_usio_probe()
by Yi Yang 11 Jul '25

11 Jul '25

From: Henry Martin <bsdhenrymartin(a)gmail.com> stable inclusion from stable-v6.6.94 commit a6c7c365734cd0fa1c5aa225a6294fdf80cad2ea category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/ICJT9C CVE: CVE-2025-38135 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 86bcae88c9209e334b2f8c252f4cc66beb261886 ] devm_ioremap() can return NULL on error. Currently, mlb_usio_probe() does not check for this case, which could result in a NULL pointer dereference. Add NULL check after devm_ioremap() to prevent this issue. Fixes: ba44dc043004 ("serial: Add Milbeaut serial control") Signed-off-by: Henry Martin <bsdhenrymartin(a)gmail.com> Link: https://lore.kernel.org/r/20250403070339.64990-1-bsdhenrymartin@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- drivers/tty/serial/milbeaut_usio.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/milbeaut_usio.c b/drivers/tty/serial/milbeaut_usio.c index 70a910085e93..9de3883a4e0b 100644 --- a/drivers/tty/serial/milbeaut_usio.c +++ b/drivers/tty/serial/milbeaut_usio.c @@ -522,7 +522,10 @@ static int mlb_usio_probe(struct platform_device *pdev) } port->membase = devm_ioremap(&pdev->dev, res->start, resource_size(res)); - + if (!port->membase) { + ret = -ENOMEM; + goto failed; + } ret = platform_get_irq_byname(pdev, "rx"); mlb_usio_irq[index][RX] = ret; -- 2.25.1

2 1

[PATCH OLK-6.6 0/6] hns3: Fix debugfs inconsistency and optimize driver code (stack usage, timer init, readability)
by huangdonghua 11 Jul '25

11 Jul '25

This patchset fixes debugfs query inconsistencies and optimizes the hns3 driver by reducing stack usage, improving timer initialization, and enhancing array handling readability. These changes improve the reliability and maintainability of the hns3 networking driver. Arnd Bergmann (1): net: hns3: reduce stack usage in hclge_dbg_dump_tm_pri() Hao Lan (1): net: hns3: Resolved the issue that the debugfs query result is inconsistent. Jian Shen (1): net: hns3: initialize reset_timer before hclgevf_misc_irq_init() Zhang Zekun (1): net: hns3: Use ARRAY_SIZE() to improve readability huangdonghua (2): Revert "net: hns3: initialize reset_timer before hclgevf_misc_irq_init()" Revert "net: hns3: Resolved the issue that the debugfs query result is inconsistent." drivers/net/ethernet/hisilicon/hns3/hnae3.h | 3 - .../ethernet/hisilicon/hns3/hns3_debugfs.c | 98 ++++++------------- .../hisilicon/hns3/hns3pf/hclge_debugfs.c | 21 ++-- .../hisilicon/hns3/hns3vf/hclgevf_main.c | 2 + .../hisilicon/hns3/hns3vf/hclgevf_regs.c | 8 +- 5 files changed, 51 insertions(+), 81 deletions(-) -- 2.33.0

2 7

[PATCH OLK-6.6] smb: client: fix use-after-free in crypt_message when using async crypto
by Wang Zhaolong 11 Jul '25

11 Jul '25

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/ICL9Y9 -------------------------------- The CVE-2024-50047 fix removed asynchronous crypto handling from crypt_message(), assuming all crypto operations are synchronous. However, when hardware crypto accelerators are used, this can cause use-after-free crashes: crypt_message() // Allocate the creq buffer containing the req creq = smb2_get_aead_req(..., &req); // Async encryption returns -EINPROGRESS immediately rc = enc ? crypto_aead_encrypt(req) : crypto_aead_decrypt(req); // Free creq while async operation is still in progress kvfree_sensitive(creq, ...); Hardware crypto modules often implement async AEAD operations for performance. When crypto_aead_encrypt/decrypt() returns -EINPROGRESS, the operation completes asynchronously. Without crypto_wait_req(), the function immediately frees the request buffer, leading to crashes when the driver later accesses the freed memory. This results in a use-after-free condition when the hardware crypto driver later accesses the freed request structure, leading to kernel crashes with NULL pointer dereferences. The issue occurs because crypto_alloc_aead() with mask=0 doesn't guarantee synchronous operation. Even without CRYPTO_ALG_ASYNC in the mask, async implementations can be selected. Fix by restoring the async crypto handling: - DECLARE_CRYPTO_WAIT(wait) for completion tracking - aead_request_set_callback() for async completion notification - crypto_wait_req() to wait for operation completion This ensures the request buffer isn't freed until the crypto operation completes, whether synchronous or asynchronous, while preserving the CVE-2024-50047 fix. Fixes: b0abcd65ec54 ("smb: client: fix UAF in async decryption") Link: https://lore.kernel.org/all/8b784a13-87b0-4131-9ff9-7a8993538749@huaweiclou… Cc: stable(a)vger.kernel.org Signed-off-by: Wang Zhaolong <wangzhaolong(a)huaweicloud.com> --- fs/smb/client/smb2ops.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c index 91dbf48de9d0..ce1fb2f3e095 100644 --- a/fs/smb/client/smb2ops.c +++ b/fs/smb/client/smb2ops.c @@ -4272,10 +4272,11 @@ crypt_message(struct TCP_Server_Info *server, int num_rqst, struct scatterlist *sg; u8 sign[SMB2_SIGNATURE_SIZE] = {}; u8 key[SMB3_ENC_DEC_KEY_SIZE]; struct aead_request *req; u8 *iv; + DECLARE_CRYPTO_WAIT(wait); unsigned int crypt_len = le32_to_cpu(tr_hdr->OriginalMessageSize); void *creq; size_t sensitive_size; rc = smb2_get_enc_key(server, le64_to_cpu(tr_hdr->SessionId), enc, key); @@ -4322,11 +4323,15 @@ crypt_message(struct TCP_Server_Info *server, int num_rqst, aead_request_set_tfm(req, tfm); aead_request_set_crypt(req, sg, sg, crypt_len, iv); aead_request_set_ad(req, assoc_data_len); - rc = enc ? crypto_aead_encrypt(req) : crypto_aead_decrypt(req); + aead_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG, + crypto_req_done, &wait); + + rc = crypto_wait_req(enc ? crypto_aead_encrypt(req) + : crypto_aead_decrypt(req), &wait); if (!rc && enc) memcpy(&tr_hdr->Signature, sign, SMB2_SIGNATURE_SIZE); kvfree_sensitive(creq, sensitive_size); -- 2.34.3

2 1

[PATCH OLK-5.10] smb: client: fix use-after-free in cifs_oplock_break
by Wang Zhaolong 11 Jul '25

11 Jul '25

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/ICJRGE -------------------------------- A race condition can occur in cifs_oplock_break() leading to a use-after-free of the cinode structure when unmounting: cifs_oplock_break() _cifsFileInfo_put(cfile) cifsFileInfo_put_final() cifs_sb_deactive() [last ref, start releasing sb] kill_sb() kill_anon_super() generic_shutdown_super() evict_inodes() dispose_list() evict() destroy_inode() call_rcu(&inode->i_rcu, i_callback) spin_lock(&cinode->open_file_lock) <- OK [later] i_callback() cifs_free_inode() kmem_cache_free(cinode) spin_unlock(&cinode->open_file_lock) <- UAF cifs_done_oplock_break(cinode) <- UAF The issue occurs when umount has already released its reference to the superblock. When _cifsFileInfo_put() calls cifs_sb_deactive(), this releases the last reference, triggering the immediate cleanup of all inodes under RCU. However, cifs_oplock_break() continues to access the cinode after this point, resulting in use-after-free. Fix this by holding an extra reference to the superblock during the entire oplock break operation. This ensures that the superblock and its inodes remain valid until the oplock break completes. Link: https://bugzilla.kernel.org/show_bug.cgi?id=220309 Fixes: b98749cac4a6 ("CIFS: keep FileInfo handle live during oplock break") Signed-off-by: Wang Zhaolong <wangzhaolong(a)huaweicloud.com> --- fs/cifs/file.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index dc7175b75c26..0fbae9a2bcdb 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -4781,16 +4781,23 @@ static int cifs_launder_page(struct page *page) void cifs_oplock_break(struct work_struct *work) { struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo, oplock_break); struct inode *inode = d_inode(cfile->dentry); + struct super_block *sb = inode->i_sb; struct cifsInodeInfo *cinode = CIFS_I(inode); struct cifs_tcon *tcon = tlink_tcon(cfile->tlink); struct TCP_Server_Info *server = tcon->ses->server; int rc = 0; bool purge_cache = false; + /* + * Hold a reference to the superblock to prevent it and its inodes from + * being freed while we are accessing cinode. Otherwise, _cifsFileInfo_put() + * may release the last reference to the sb and trigger inode eviction. + */ + cifs_sb_active(sb); wait_on_bit(&cinode->flags, CIFS_INODE_PENDING_WRITERS, TASK_UNINTERRUPTIBLE); server->ops->downgrade_oplock(server, cinode, cfile->oplock_level, cfile->oplock_epoch, &purge_cache); @@ -4834,10 +4841,11 @@ void cifs_oplock_break(struct work_struct *work) cinode); cifs_dbg(FYI, "Oplock release rc = %d\n", rc); } _cifsFileInfo_put(cfile, false /* do not wait for ourself */, false); cifs_done_oplock_break(cinode); + cifs_sb_deactive(sb); } /* * The presence of cifs_direct_io() in the address space ops vector * allowes open() O_DIRECT flags which would have failed otherwise. -- 2.34.3

2 1

[PATCH] [Huawei] smb: client: fix use-after-free in cifs_oplock_break
by Wang Zhaolong 11 Jul '25

11 Jul '25

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/ICJRGE -------------------------------- A race condition can occur in cifs_oplock_break() leading to a use-after-free of the cinode structure when unmounting: cifs_oplock_break() _cifsFileInfo_put(cfile) cifsFileInfo_put_final() cifs_sb_deactive() [last ref, start releasing sb] kill_sb() kill_anon_super() generic_shutdown_super() evict_inodes() dispose_list() evict() destroy_inode() call_rcu(&inode->i_rcu, i_callback) spin_lock(&cinode->open_file_lock) <- OK [later] i_callback() cifs_free_inode() kmem_cache_free(cinode) spin_unlock(&cinode->open_file_lock) <- UAF cifs_done_oplock_break(cinode) <- UAF The issue occurs when umount has already released its reference to the superblock. When _cifsFileInfo_put() calls cifs_sb_deactive(), this releases the last reference, triggering the immediate cleanup of all inodes under RCU. However, cifs_oplock_break() continues to access the cinode after this point, resulting in use-after-free. Fix this by holding an extra reference to the superblock during the entire oplock break operation. This ensures that the superblock and its inodes remain valid until the oplock break completes. Link: https://bugzilla.kernel.org/show_bug.cgi?id=220309 Fixes: b98749cac4a6 ("CIFS: keep FileInfo handle live during oplock break") Signed-off-by: Wang Zhaolong <wangzhaolong(a)huaweicloud.com> --- fs/smb/client/file.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/fs/smb/client/file.c b/fs/smb/client/file.c index 1b754fe73c83..5a916294a3c1 100644 --- a/fs/smb/client/file.c +++ b/fs/smb/client/file.c @@ -5050,20 +5050,27 @@ static int cifs_launder_folio(struct folio *folio) void cifs_oplock_break(struct work_struct *work) { struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo, oplock_break); struct inode *inode = d_inode(cfile->dentry); - struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); + struct super_block *sb = inode->i_sb; + struct cifs_sb_info *cifs_sb = CIFS_SB(sb); struct cifsInodeInfo *cinode = CIFS_I(inode); struct cifs_tcon *tcon; struct TCP_Server_Info *server; struct tcon_link *tlink; int rc = 0; bool purge_cache = false, oplock_break_cancelled; __u64 persistent_fid, volatile_fid; __u16 net_fid; + /* + * Hold a reference to the superblock to prevent it and its inodes from + * being freed while we are accessing cinode. Otherwise, _cifsFileInfo_put() + * may release the last reference to the sb and trigger inode eviction. + */ + cifs_sb_active(sb); wait_on_bit(&cinode->flags, CIFS_INODE_PENDING_WRITERS, TASK_UNINTERRUPTIBLE); tlink = cifs_sb_tlink(cifs_sb); if (IS_ERR(tlink)) @@ -5132,10 +5139,11 @@ void cifs_oplock_break(struct work_struct *work) spin_unlock(&cinode->open_file_lock); cifs_put_tlink(tlink); out: cifs_done_oplock_break(cinode); + cifs_sb_deactive(sb); } /* * The presence of cifs_direct_io() in the address space ops vector * allowes open() O_DIRECT flags which would have failed otherwise. -- 2.34.3

1 0

[PATCH OLK-6.6] smb: client: fix use-after-free in crypt_message when using async crypto
by Wang Zhaolong 11 Jul '25

11 Jul '25

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/ICL9Y9 -------------------------------- The CVE-2024-50047 fix removed asynchronous crypto handling from crypt_message(), assuming all crypto operations are synchronous. However, when hardware crypto accelerators are used, this can cause use-after-free crashes: crypt_message() // Allocate the creq buffer containing the req creq = smb2_get_aead_req(..., &req); // Async encryption returns -EINPROGRESS immediately rc = enc ? crypto_aead_encrypt(req) : crypto_aead_decrypt(req); // Free creq while async operation is still in progress kvfree_sensitive(creq, ...); Hardware crypto modules often implement async AEAD operations for performance. When crypto_aead_encrypt/decrypt() returns -EINPROGRESS, the operation completes asynchronously. Without crypto_wait_req(), the function immediately frees the request buffer, leading to crashes when the driver later accesses the freed memory. This results in a use-after-free condition when the hardware crypto driver later accesses the freed request structure, leading to kernel crashes with NULL pointer dereferences. The issue occurs because crypto_alloc_aead() with mask=0 doesn't guarantee synchronous operation. Even without CRYPTO_ALG_ASYNC in the mask, async implementations can be selected. Fix by restoring the async crypto handling: - DECLARE_CRYPTO_WAIT(wait) for completion tracking - aead_request_set_callback() for async completion notification - crypto_wait_req() to wait for operation completion This ensures the request buffer isn't freed until the crypto operation completes, whether synchronous or asynchronous, while preserving the CVE-2024-50047 fix. Fixes: b0abcd65ec54 ("smb: client: fix UAF in async decryption") Link: https://lore.kernel.org/all/8b784a13-87b0-4131-9ff9-7a8993538749@huaweiclou… Cc: stable(a)vger.kernel.org Signed-off-by: Wang Zhaolong <wangzhaolong(a)huaweicloud.com> --- fs/smb/client/smb2ops.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c index 91dbf48de9d0..ce1fb2f3e095 100644 --- a/fs/smb/client/smb2ops.c +++ b/fs/smb/client/smb2ops.c @@ -4272,10 +4272,11 @@ crypt_message(struct TCP_Server_Info *server, int num_rqst, struct scatterlist *sg; u8 sign[SMB2_SIGNATURE_SIZE] = {}; u8 key[SMB3_ENC_DEC_KEY_SIZE]; struct aead_request *req; u8 *iv; + DECLARE_CRYPTO_WAIT(wait); unsigned int crypt_len = le32_to_cpu(tr_hdr->OriginalMessageSize); void *creq; size_t sensitive_size; rc = smb2_get_enc_key(server, le64_to_cpu(tr_hdr->SessionId), enc, key); @@ -4322,11 +4323,15 @@ crypt_message(struct TCP_Server_Info *server, int num_rqst, aead_request_set_tfm(req, tfm); aead_request_set_crypt(req, sg, sg, crypt_len, iv); aead_request_set_ad(req, assoc_data_len); - rc = enc ? crypto_aead_encrypt(req) : crypto_aead_decrypt(req); + aead_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG, + crypto_req_done, &wait); + + rc = crypto_wait_req(enc ? crypto_aead_encrypt(req) + : crypto_aead_decrypt(req), &wait); if (!rc && enc) memcpy(&tr_hdr->Signature, sign, SMB2_SIGNATURE_SIZE); kvfree_sensitive(creq, sensitive_size); -- 2.34.3

2 1

[PATCH OLK-5.10] smb: client: fix use-after-free in crypt_message when using async crypto
by Wang Zhaolong 11 Jul '25

11 Jul '25

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/ICL9Y9 -------------------------------- The CVE-2024-50047 fix removed asynchronous crypto handling from crypt_message(), assuming all crypto operations are synchronous. However, when hardware crypto accelerators are used, this can cause use-after-free crashes: crypt_message() // Allocate the creq buffer containing the req creq = smb2_get_aead_req(..., &req); // Async encryption returns -EINPROGRESS immediately rc = enc ? crypto_aead_encrypt(req) : crypto_aead_decrypt(req); // Free creq while async operation is still in progress kvfree_sensitive(creq, ...); Hardware crypto modules often implement async AEAD operations for performance. When crypto_aead_encrypt/decrypt() returns -EINPROGRESS, the operation completes asynchronously. Without crypto_wait_req(), the function immediately frees the request buffer, leading to crashes when the driver later accesses the freed memory. This results in a use-after-free condition when the hardware crypto driver later accesses the freed request structure, leading to kernel crashes with NULL pointer dereferences. The issue occurs because crypto_alloc_aead() with mask=0 doesn't guarantee synchronous operation. Even without CRYPTO_ALG_ASYNC in the mask, async implementations can be selected. Fix by restoring the async crypto handling: - DECLARE_CRYPTO_WAIT(wait) for completion tracking - aead_request_set_callback() for async completion notification - crypto_wait_req() to wait for operation completion This ensures the request buffer isn't freed until the crypto operation completes, whether synchronous or asynchronous, while preserving the CVE-2024-50047 fix. Fixes: 6334d87eb12e ("[Backport] smb: client: fix UAF in async decryption") Link: https://lore.kernel.org/all/8b784a13-87b0-4131-9ff9-7a8993538749@huaweiclou… Cc: stable(a)vger.kernel.org Signed-off-by: Wang Zhaolong <wangzhaolong(a)huaweicloud.com> --- fs/cifs/smb2ops.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index a597490ae1f7..16245e8b6f28 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -4313,10 +4313,11 @@ crypt_message(struct TCP_Server_Info *server, int num_rqst, struct scatterlist *sg; u8 sign[SMB2_SIGNATURE_SIZE] = {}; u8 key[SMB3_ENC_DEC_KEY_SIZE]; struct aead_request *req; u8 *iv; + DECLARE_CRYPTO_WAIT(wait); unsigned int crypt_len = le32_to_cpu(tr_hdr->OriginalMessageSize); void *creq; rc = smb2_get_enc_key(server, tr_hdr->SessionId, enc, key); if (rc) { @@ -4361,11 +4362,15 @@ crypt_message(struct TCP_Server_Info *server, int num_rqst, aead_request_set_tfm(req, tfm); aead_request_set_crypt(req, sg, sg, crypt_len, iv); aead_request_set_ad(req, assoc_data_len); - rc = enc ? crypto_aead_encrypt(req) : crypto_aead_decrypt(req); + aead_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG, + crypto_req_done, &wait); + + rc = crypto_wait_req(enc ? crypto_aead_encrypt(req) + : crypto_aead_decrypt(req), &wait); if (!rc && enc) memcpy(&tr_hdr->Signature, sign, SMB2_SIGNATURE_SIZE); kfree_sensitive(creq); -- 2.34.3

2 1

[openeuler:OLK-6.6] BUILD REGRESSION 22dfee51b8fdbac1192cd4d92b045c4aeb8f888c
by kernel test robot 11 Jul '25

11 Jul '25

tree/branch: https://gitee.com/openeuler/kernel.git OLK-6.6 branch HEAD: 22dfee51b8fdbac1192cd4d92b045c4aeb8f888c !17055 bpf lts backport Error/Warning (recently discovered and may have been fixed): https://lore.kernel.org/oe-kbuild-all/202506110730.xt79RnwS-lkp@intel.com https://lore.kernel.org/oe-kbuild-all/202506170139.5RMGvcYK-lkp@intel.com https://lore.kernel.org/oe-kbuild-all/202506181950.B2Y9buyH-lkp@intel.com https://lore.kernel.org/oe-kbuild-all/202507011307.oRLSFbBZ-lkp@intel.com https://lore.kernel.org/oe-kbuild-all/202507040646.2QNfCtsv-lkp@intel.com https://lore.kernel.org/oe-kbuild-all/202507051010.IHIzrory-lkp@intel.com https://lore.kernel.org/oe-kbuild-all/202507052222.OKOdFMzt-lkp@intel.com <instantiation>:1:5: error: expected absolute expression drivers/coda/coda.c:269: warning: Function parameter or member 's_smmu_id' not described in 'is_cc_vmid' drivers/coda/coda.c:665: warning: Excess function parameter 'master' description in 'virtcca_create_ste_entry' drivers/coda/coda.c:665: warning: Excess function parameter 'sid' description in 'virtcca_create_ste_entry' drivers/coda/coda.c:665: warning: Excess function parameter 'smmu' description in 'virtcca_create_ste_entry' drivers/coda/coda.c:665: warning: Function parameter or member 'pci_dev' not described in 'virtcca_create_ste_entry' drivers/gpu/drm/phytium/pe220x_dc.c:252:6: warning: no previous prototype for function 'pe220x_dc_bmc_hw_plane_get_primary_format' [-Wmissing-prototypes] drivers/gpu/drm/phytium/phytium_gem.c:174:5: warning: no previous prototype for function 'phytium_gem_prime_mmap' [-Wmissing-prototypes] drivers/iommu/arm/arm-smmu-v3/arm-s-smmu-v3.c:56: warning: Function parameter or member 's_smmu_id' not described in 'virtcca_smmu_cmdq_need_forward' drivers/irqchip/irq-gic-v3-its.c:532:6: warning: no previous prototype for function 'build_devid_pools' [-Wmissing-prototypes] drivers/irqchip/irq-gic-v3.c:1548:6: warning: no previous prototype for function 'gic_get_ipiv_status' [-Wmissing-prototypes] include/linux/virtcca_cvm_domain.h:79:51: warning: declaration of 'struct pci_dev' will not be visible outside of this function [-Wvisibility] kismet: WARNING: unmet direct dependencies detected for ACPI_HOTPLUG_IGNORE_OSC when selected by X86 mm/memory.c:5532:17: warning: variable 'nr_pages' set but not used [-Wunused-but-set-variable] mm/memory.c:5532:24: warning: variable 'nr_pages' set but not used [-Wunused-but-set-variable] Unverified Error/Warning (likely false positive, kindly check if interested): fs/btrfs/accessors.h:418:43: warning: 'pslot' may be used uninitialized in this function [-Wmaybe-uninitialized] Error/Warning ids grouped by kconfigs: recent_errors |-- arm64-allmodconfig | |-- drivers-coda-coda.c:warning:Excess-function-parameter-master-description-in-virtcca_create_ste_entry | |-- drivers-coda-coda.c:warning:Excess-function-parameter-sid-description-in-virtcca_create_ste_entry | |-- drivers-coda-coda.c:warning:Excess-function-parameter-smmu-description-in-virtcca_create_ste_entry | |-- drivers-coda-coda.c:warning:Function-parameter-or-member-pci_dev-not-described-in-virtcca_create_ste_entry | |-- drivers-coda-coda.c:warning:Function-parameter-or-member-s_smmu_id-not-described-in-is_cc_vmid | |-- drivers-gpu-drm-phytium-pe22_dc.c:warning:no-previous-prototype-for-function-pe22_dc_bmc_hw_plane_get_primary_format | |-- drivers-gpu-drm-phytium-phytium_gem.c:warning:no-previous-prototype-for-function-phytium_gem_prime_mmap | |-- drivers-iommu-arm-arm-smmu-v3-arm-s-smmu-v3.c:warning:Function-parameter-or-member-s_smmu_id-not-described-in-virtcca_smmu_cmdq_need_forward | |-- drivers-irqchip-irq-gic-v3-its.c:warning:no-previous-prototype-for-function-build_devid_pools | |-- drivers-irqchip-irq-gic-v3.c:warning:no-previous-prototype-for-function-gic_get_ipiv_status | |-- instantiation:error:expected-absolute-expression | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used |-- arm64-allnoconfig | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used |-- arm64-randconfig-001-20250710 | |-- instantiation:error:expected-absolute-expression | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used |-- arm64-randconfig-002-20250710 | |-- instantiation:error:expected-absolute-expression | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used |-- arm64-randconfig-003-20250710 | |-- fs-btrfs-accessors.h:warning:pslot-may-be-used-uninitialized-in-this-function | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used |-- arm64-randconfig-004-20250710 | |-- instantiation:error:expected-absolute-expression | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used |-- loongarch-allmodconfig | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used |-- loongarch-allnoconfig | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used |-- loongarch-randconfig-001-20250710 | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used |-- loongarch-randconfig-002-20250710 | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used |-- x86_64-allnoconfig | |-- kismet:WARNING:unmet-direct-dependencies-detected-for-ACPI_HOTPLUG_IGNORE_OSC-when-selected-by-X86 | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used |-- x86_64-allyesconfig | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used |-- x86_64-buildonly-randconfig-001-20250710 | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_debugfs.c:error:no-previous-prototype-for-sxe_debugfs_entries_exit | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_debugfs.c:error:no-previous-prototype-for-sxe_debugfs_entries_init | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_debugfs.c:error:no-previous-prototype-for-sxe_debugfs_exit | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_debugfs.c:error:no-previous-prototype-for-sxe_debugfs_init | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_ethtool.c:error:no-previous-prototype-for-sxe_phys_id_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_ethtool.c:error:no-previous-prototype-for-sxe_reg_test | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_ethtool.c:error:suggest-braces-around-empty-body-in-an-if-statement | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_fc_autoneg_localcap_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_all_irq_disable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_all_ring_disable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_crc_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_dcb_max_mem_window_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_dcb_pfc_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_dcb_rate_limiter_clear | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_dcb_rx_bw_alloc_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_dcb_tx_data_bw_alloc_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_dcb_tx_desc_bw_alloc_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_dcb_tx_ring_rate_factor_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_event_irq_auto_clear_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_event_irq_map | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fc_autoneg_disable_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fc_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fc_mac_addr_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fc_requested_mode_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fc_tc_high_water_mark_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fc_tc_low_water_mark_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fnav_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fnav_port_mask_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fnav_sample_rule_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fnav_sample_rules_table_reinit | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fnav_specific_rule_add | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fnav_specific_rule_del | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fnav_specific_rule_mask_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_channel_state_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_drv_status_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_fw_ack_header_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_fw_ov_clear | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_fw_status_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_is_fw_over_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_lock_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_lock_release | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_packet_data_dword_rcv | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_packet_data_dword_send | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_packet_header_send | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_packet_send_done | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_irq_cause_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_irq_general_reg_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_irq_general_reg_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_is_fc_autoneg_disabled | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_is_link_state_up | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_link_speed_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_link_speed_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_loopback_switch | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mac_max_frame_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mac_max_frame_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mac_pad_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mac_txrx_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mbx_init | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mbx_mem_clear | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mc_filter_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mc_filter_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mta_hash_table_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mta_hash_table_update | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_nic_reset | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_no_snoop_disable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_pcie_vt_mode_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_pending_irq_read_clear | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_pending_irq_write_clear | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_pf_rst_done_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_pfc_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_pool_mac_anti_spoof_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_pool_rx_mode_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_pool_rx_mode_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_pool_rx_ring_drop_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ptp_init | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ptp_is_rx_timestamp_valid | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ptp_rx_timestamp_clear | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ptp_rx_timestamp_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ptp_systime_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ptp_systime_init | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ptp_timestamp_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ptp_timestamp_mode_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ptp_tx_timestamp_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rcv_msg_from_vf | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ring_irq_auto_disable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ring_irq_interval_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ring_irq_map | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rss_key_set_all | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rss_redir_tbl_reg_write | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rss_redir_tbl_set_all | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_cap_switch_off | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_cap_switch_on | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_desc_thresh_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_dma_ctrl_init | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_dma_lro_ctrl_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_drop_switch | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_lro_ack_switch | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_lro_ctl_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_lro_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_mode_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_mode_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_multi_ring_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_nfs_filter_disable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_pkt_buf_size_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_pool_bitmap_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_pool_bitmap_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_queue_desc_reg_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_rcv_ctl_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_ring_desc_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_ring_switch | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_ring_switch_not_polling | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_udp_frag_checksum_disable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_send_msg_to_vf | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_specific_irq_disable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_specific_irq_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_spoof_count_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_stats_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_stats_regs_clean | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_stats_seq_clean | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_desc_thresh_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_pkt_buf_size_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_pkt_buf_switch | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_pkt_buf_thresh_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_pool_bitmap_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_pool_bitmap_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_ring_desc_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_ring_head_init | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_ring_info_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_ring_switch | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_ring_switch_not_polling | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_ring_tail_init | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_vlan_insert_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_vlan_tag_clear | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_uc_addr_add | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_uc_addr_clear | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_uc_addr_del | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_uc_addr_pool_del | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_uc_addr_pool_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vf_ack_check | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vf_req_check | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vf_rst_check | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vlan_filter_array_clear | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vlan_filter_array_read | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vlan_filter_array_write | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vlan_filter_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vlan_filter_switch | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vlan_pool_filter_read | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vlan_tag_strip_switch | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vlvf_slot_find | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vt_ctrl_cfg | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vt_disable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vt_pool_loopback_switch | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:suggest-braces-around-empty-body-in-an-if-statement | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_irq.c:error:no-previous-prototype-for-sxe_disable_dcb | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_irq.c:error:no-previous-prototype-for-sxe_disable_rss | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_irq.c:error:no-previous-prototype-for-sxe_lsc_irq_handler | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_irq.c:error:no-previous-prototype-for-sxe_mailbox_irq_handler | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_irq.c:error:no-previous-prototype-for-sxe_msi_irq_init | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_main.c:error:no-previous-prototype-for-sxe_allow_inval_mac | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_phy.c:error:no-previous-prototype-for-sxe_multispeed_sfp_link_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_rx_proc.c:error:no-previous-prototype-for-sxe_headers_cleanup | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_rx_proc.c:error:no-previous-prototype-for-sxe_rx_buffer_page_offset_update | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_sriov.c:error:no-previous-prototype-for-sxe_set_vf_link_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_sriov.c:error:variable-ret-set-but-not-used | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_xdp.c:error:no-previous-prototype-for-sxe_txrx_ring_enable | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_32bit_counter_update | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_36bit_counter_update | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_event_irq_map | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_hw_reset | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_hw_ring_irq_map | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_hw_stop | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_irq_disable | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_irq_enable | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_link_state_get | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_mailbox_read | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_mailbox_write | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_msg_read | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_msg_write | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_packet_stats_get | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_pf_ack_irq_trigger | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_pf_req_irq_trigger | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_ring_irq_interval_set | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_rx_rcv_ctl_configure | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_rx_ring_desc_configure | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_rx_ring_switch | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_specific_irq_enable | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_stats_init_value_get | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_tx_ring_switch | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_rx_proc.c:error:no-previous-prototype-for-sxevf_rx_ring_buffers_alloc | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_tx_proc.c:error:no-previous-prototype-for-sxevf_tx_ring_alloc | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_tx_proc.c:error:no-previous-prototype-for-sxevf_tx_ring_free | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_tx_proc.c:error:suggest-braces-around-empty-body-in-an-else-statement | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_tx_proc.c:error:suggest-braces-around-empty-body-in-an-if-statement | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used |-- x86_64-buildonly-randconfig-002-20250710 | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used |-- x86_64-buildonly-randconfig-003-20250710 | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used |-- x86_64-buildonly-randconfig-004-20250710 | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used |-- x86_64-buildonly-randconfig-005-20250710 | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used |-- x86_64-buildonly-randconfig-006-20250710 | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used |-- x86_64-defconfig | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_debugfs.c:error:no-previous-prototype-for-sxe_debugfs_entries_exit | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_debugfs.c:error:no-previous-prototype-for-sxe_debugfs_entries_init | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_debugfs.c:error:no-previous-prototype-for-sxe_debugfs_exit | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_debugfs.c:error:no-previous-prototype-for-sxe_debugfs_init | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_ethtool.c:error:no-previous-prototype-for-sxe_phys_id_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_ethtool.c:error:no-previous-prototype-for-sxe_reg_test | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_ethtool.c:error:suggest-braces-around-empty-body-in-an-if-statement | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_fc_autoneg_localcap_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_all_irq_disable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_all_ring_disable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_crc_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_dcb_max_mem_window_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_dcb_pfc_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_dcb_rate_limiter_clear | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_dcb_rx_bw_alloc_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_dcb_tx_data_bw_alloc_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_dcb_tx_desc_bw_alloc_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_dcb_tx_ring_rate_factor_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_event_irq_auto_clear_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_event_irq_map | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fc_autoneg_disable_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fc_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fc_mac_addr_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fc_requested_mode_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fc_tc_high_water_mark_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fc_tc_low_water_mark_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fnav_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fnav_port_mask_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fnav_sample_rule_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fnav_sample_rules_table_reinit | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fnav_specific_rule_add | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fnav_specific_rule_del | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_fnav_specific_rule_mask_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_channel_state_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_drv_status_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_fw_ack_header_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_fw_ov_clear | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_fw_status_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_is_fw_over_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_lock_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_lock_release | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_packet_data_dword_rcv | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_packet_data_dword_send | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_packet_header_send | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_hdc_packet_send_done | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_irq_cause_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_irq_general_reg_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_irq_general_reg_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_is_fc_autoneg_disabled | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_is_link_state_up | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_link_speed_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_link_speed_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_loopback_switch | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mac_max_frame_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mac_max_frame_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mac_pad_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mac_txrx_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mbx_init | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mbx_mem_clear | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mc_filter_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mc_filter_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mta_hash_table_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_mta_hash_table_update | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_nic_reset | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_no_snoop_disable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_pcie_vt_mode_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_pending_irq_read_clear | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_pending_irq_write_clear | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_pf_rst_done_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_pfc_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_pool_mac_anti_spoof_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_pool_rx_mode_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_pool_rx_mode_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_pool_rx_ring_drop_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ptp_init | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ptp_is_rx_timestamp_valid | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ptp_rx_timestamp_clear | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ptp_rx_timestamp_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ptp_systime_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ptp_systime_init | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ptp_timestamp_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ptp_timestamp_mode_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ptp_tx_timestamp_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rcv_msg_from_vf | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ring_irq_auto_disable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ring_irq_interval_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_ring_irq_map | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rss_key_set_all | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rss_redir_tbl_reg_write | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rss_redir_tbl_set_all | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_cap_switch_off | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_cap_switch_on | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_desc_thresh_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_dma_ctrl_init | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_dma_lro_ctrl_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_drop_switch | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_lro_ack_switch | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_lro_ctl_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_lro_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_mode_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_mode_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_multi_ring_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_nfs_filter_disable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_pkt_buf_size_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_pool_bitmap_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_pool_bitmap_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_queue_desc_reg_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_rcv_ctl_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_ring_desc_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_ring_switch | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_ring_switch_not_polling | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_rx_udp_frag_checksum_disable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_send_msg_to_vf | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_specific_irq_disable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_specific_irq_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_spoof_count_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_stats_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_stats_regs_clean | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_stats_seq_clean | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_desc_thresh_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_pkt_buf_size_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_pkt_buf_switch | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_pkt_buf_thresh_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_pool_bitmap_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_pool_bitmap_set | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_ring_desc_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_ring_head_init | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_ring_info_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_ring_switch | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_ring_switch_not_polling | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_ring_tail_init | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_vlan_insert_get | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_tx_vlan_tag_clear | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_uc_addr_add | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_uc_addr_clear | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_uc_addr_del | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_uc_addr_pool_del | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_uc_addr_pool_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vf_ack_check | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vf_req_check | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vf_rst_check | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vlan_filter_array_clear | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vlan_filter_array_read | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vlan_filter_array_write | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vlan_filter_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vlan_filter_switch | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vlan_pool_filter_read | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vlan_tag_strip_switch | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vlvf_slot_find | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vt_ctrl_cfg | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vt_disable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:no-previous-prototype-for-sxe_hw_vt_pool_loopback_switch | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_hw.c:error:suggest-braces-around-empty-body-in-an-if-statement | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_irq.c:error:no-previous-prototype-for-sxe_disable_dcb | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_irq.c:error:no-previous-prototype-for-sxe_disable_rss | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_irq.c:error:no-previous-prototype-for-sxe_lsc_irq_handler | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_irq.c:error:no-previous-prototype-for-sxe_mailbox_irq_handler | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_irq.c:error:no-previous-prototype-for-sxe_msi_irq_init | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_main.c:error:no-previous-prototype-for-sxe_allow_inval_mac | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_phy.c:error:no-previous-prototype-for-sxe_multispeed_sfp_link_configure | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_rx_proc.c:error:no-previous-prototype-for-sxe_headers_cleanup | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_rx_proc.c:error:no-previous-prototype-for-sxe_rx_buffer_page_offset_update | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_sriov.c:error:no-previous-prototype-for-sxe_set_vf_link_enable | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_sriov.c:error:variable-ret-set-but-not-used | |-- drivers-net-ethernet-linkdata-sxe-sxepf-sxe_xdp.c:error:no-previous-prototype-for-sxe_txrx_ring_enable | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_32bit_counter_update | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_36bit_counter_update | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_event_irq_map | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_hw_reset | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_hw_ring_irq_map | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_hw_stop | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_irq_disable | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_irq_enable | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_link_state_get | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_mailbox_read | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_mailbox_write | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_msg_read | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_msg_write | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_packet_stats_get | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_pf_ack_irq_trigger | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_pf_req_irq_trigger | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_ring_irq_interval_set | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_rx_rcv_ctl_configure | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_rx_ring_desc_configure | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_rx_ring_switch | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_specific_irq_enable | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_stats_init_value_get | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_hw.c:error:no-previous-prototype-for-sxevf_tx_ring_switch | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_rx_proc.c:error:no-previous-prototype-for-sxevf_rx_ring_buffers_alloc | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_tx_proc.c:error:no-previous-prototype-for-sxevf_tx_ring_alloc | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_tx_proc.c:error:no-previous-prototype-for-sxevf_tx_ring_free | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_tx_proc.c:error:suggest-braces-around-empty-body-in-an-else-statement | |-- drivers-net-ethernet-linkdata-sxevf-sxevf-sxevf_tx_proc.c:error:suggest-braces-around-empty-body-in-an-if-statement | `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used `-- x86_64-randconfig-161-20250711 |-- include-linux-virtcca_cvm_domain.h:warning:declaration-of-struct-pci_dev-will-not-be-visible-outside-of-this-function `-- mm-memory.c:warning:variable-nr_pages-set-but-not-used elapsed time: 722m configs tested: 20 configs skipped: 117 tested configs: arm64 allmodconfig clang-19 arm64 allnoconfig gcc-15.1.0 arm64 randconfig-001-20250710 clang-21 arm64 randconfig-002-20250710 clang-21 arm64 randconfig-003-20250710 gcc-8.5.0 arm64 randconfig-004-20250710 clang-21 loongarch allmodconfig clang-19 loongarch allnoconfig clang-21 loongarch randconfig-001-20250710 gcc-14.3.0 loongarch randconfig-002-20250710 gcc-15.1.0 x86_64 allnoconfig clang-20 x86_64 allyesconfig clang-20 x86_64 buildonly-randconfig-001-20250710 gcc-12 x86_64 buildonly-randconfig-002-20250710 gcc-12 x86_64 buildonly-randconfig-003-20250710 gcc-12 x86_64 buildonly-randconfig-004-20250710 clang-20 x86_64 buildonly-randconfig-005-20250710 clang-20 x86_64 buildonly-randconfig-006-20250710 clang-20 x86_64 defconfig gcc-11 x86_64 rhel-9.4-rust clang-20 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0