- Kernel - mailweb.openeuler.org

[PATCH openEuler-1.0-LTS] Driver for Zhaoxin CPU core temperature monitoring
by LeoLiuoc 15 Apr '22

15 Apr '22

zhaoxin inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I52DS7 CVE: NA Add support for the temperature sensor inside CPU. Supported are all known variants of the Zhaoxin processors. Signed-off-by: LeoLiu-oc <LeoLiu-oc(a)zhaoxin.com> --- drivers/hwmon/Kconfig | 9 + drivers/hwmon/Makefile | 1 + drivers/hwmon/via-cputemp.c | 1 - drivers/hwmon/zhaoxin-cputemp.c | 288 ++++++++++++++++++++++++++++++++ 4 files changed, 298 insertions(+), 1 deletion(-) create mode 100644 drivers/hwmon/zhaoxin-cputemp.c diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index c7adaca2ab01..1ef7c384d652 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1720,6 +1720,15 @@ config SENSORS_VIA_CPUTEMP sensor inside your CPU. Supported are all known variants of the VIA C7 and Nano. +config SENSORS_ZHAOXIN_CPUTEMP + tristate "Zhaoxin CPU temperature sensor" + depends on X86 + select HWMON_VID + help + If you say yes here you get support for the temperature + sensor inside your CPU. Supported are all known variants of + the Zhaoxin processors. + config SENSORS_VIA686A tristate "VIA686A" depends on PCI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 93f7f41ea4ad..44674a1e75e8 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -168,6 +168,7 @@ obj-$(CONFIG_SENSORS_TMP401) += tmp401.o obj-$(CONFIG_SENSORS_TMP421) += tmp421.o obj-$(CONFIG_SENSORS_VEXPRESS) += vexpress-hwmon.o obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o +obj-$(CONFIG_SENSORS_ZHAOXIN_CPUTEMP) += zhaoxin-cputemp.o obj-$(CONFIG_SENSORS_VIA686A) += via686a.o obj-$(CONFIG_SENSORS_VT1211) += vt1211.o obj-$(CONFIG_SENSORS_VT8231) += vt8231.o diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c index 0e81f287d305..3c960b999958 100644 --- a/drivers/hwmon/via-cputemp.c +++ b/drivers/hwmon/via-cputemp.c @@ -287,7 +287,6 @@ static const struct x86_cpu_id __initconst cputemp_ids[] = { { X86_VENDOR_CENTAUR, 6, 0xa, }, /* C7 A */ { X86_VENDOR_CENTAUR, 6, 0xd, }, /* C7 D */ { X86_VENDOR_CENTAUR, 6, 0xf, }, /* Nano */ - { X86_VENDOR_CENTAUR, 7, X86_MODEL_ANY, }, {} }; MODULE_DEVICE_TABLE(x86cpu, cputemp_ids); diff --git a/drivers/hwmon/zhaoxin-cputemp.c b/drivers/hwmon/zhaoxin-cputemp.c new file mode 100644 index 000000000000..24462719b6ca --- /dev/null +++ b/drivers/hwmon/zhaoxin-cputemp.c @@ -0,0 +1,288 @@ +/* + * zhaoxin-cputemp.c - Driver for Zhaoxin CPU core temperature monitoring + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/hwmon.h> +#include <linux/hwmon-vid.h> +#include <linux/sysfs.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/list.h> +#include <linux/platform_device.h> +#include <linux/cpu.h> +#include <asm/msr.h> +#include <asm/processor.h> +#include <asm/cpu_device_id.h> + +#define DRVNAME "zhaoxin_cputemp" + +enum { SHOW_TEMP, SHOW_LABEL, SHOW_NAME }; + +/* Functions declaration */ +struct zhaoxin_cputemp_data { + struct device *hwmon_dev; + const char *name; + u8 vrm; + u32 id; + u32 msr_temp; + u32 msr_vid; +}; + +/* Sysfs stuff */ +static ssize_t show_name(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct zhaoxin_cputemp_data *data = dev_get_drvdata(dev); + + if (attr->index == SHOW_NAME) + ret = sprintf(buf, "%s\n", data->name); + else /* show label */ + ret = sprintf(buf, "Core %d\n", data->id); + return ret; +} + +static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct zhaoxin_cputemp_data *data = dev_get_drvdata(dev); + u32 eax, edx; + int err; + + err = rdmsr_safe_on_cpu(data->id, data->msr_temp, &eax, &edx); + if (err) + return -EAGAIN; + + return sprintf(buf, "%lu\n", ((unsigned long)eax & 0xffffff) * 1000); +} + +static ssize_t cpu0_vid_show(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct zhaoxin_cputemp_data *data = dev_get_drvdata(dev); + u32 eax, edx; + int err; + + err = rdmsr_safe_on_cpu(data->id, data->msr_vid, &eax, &edx); + if (err) + return -EAGAIN; + + return sprintf(buf, "%d\n", vid_from_reg(~edx & 0x7f, data->vrm)); +} + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, SHOW_TEMP); +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_name, NULL, SHOW_LABEL); +static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, SHOW_NAME); + +static struct attribute *zhaoxin_cputemp_attributes[] = { + &sensor_dev_attr_name.dev_attr.attr, + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + NULL +}; + +static const struct attribute_group zhaoxin_cputemp_group = { + .attrs = zhaoxin_cputemp_attributes, +}; + +/* Optional attributes */ +static DEVICE_ATTR_RO(cpu0_vid); + +static int zhaoxin_cputemp_probe(struct platform_device *pdev) +{ + struct zhaoxin_cputemp_data *data; + int err; + u32 eax, edx; + + data = devm_kzalloc(&pdev->dev, sizeof(struct zhaoxin_cputemp_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->id = pdev->id; + data->name = "zhaoxin_cputemp"; + data->msr_temp = 0x1423; + + /* Test if we can access the TEMPERATURE MSR */ + err = rdmsr_safe_on_cpu(data->id, data->msr_temp, &eax, &edx); + if (err) { + dev_err(&pdev->dev, "Unable to access TEMPERATURE MSR, giving up\n"); + return err; + } + + platform_set_drvdata(pdev, data); + + err = sysfs_create_group(&pdev->dev.kobj, &zhaoxin_cputemp_group); + if (err) + return err; + + if (data->msr_vid) + data->vrm = vid_which_vrm(); + + if (data->vrm) { + err = device_create_file(&pdev->dev, &dev_attr_cpu0_vid); + if (err) + goto exit_remove; + } + + data->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + dev_err(&pdev->dev, "Class registration failed (%d)\n", err); + goto exit_remove; + } + + return 0; + +exit_remove: + if (data->vrm) + device_remove_file(&pdev->dev, &dev_attr_cpu0_vid); + sysfs_remove_group(&pdev->dev.kobj, &zhaoxin_cputemp_group); + return err; +} + +static int zhaoxin_cputemp_remove(struct platform_device *pdev) +{ + struct zhaoxin_cputemp_data *data = platform_get_drvdata(pdev); + + hwmon_device_unregister(data->hwmon_dev); + if (data->vrm) + device_remove_file(&pdev->dev, &dev_attr_cpu0_vid); + sysfs_remove_group(&pdev->dev.kobj, &zhaoxin_cputemp_group); + return 0; +} + +static struct platform_driver zhaoxin_cputemp_driver = { + .driver = { + .name = DRVNAME, + }, + .probe = zhaoxin_cputemp_probe, + .remove = zhaoxin_cputemp_remove, +}; + +struct pdev_entry { + struct list_head list; + struct platform_device *pdev; + unsigned int cpu; +}; + +static LIST_HEAD(pdev_list); +static DEFINE_MUTEX(pdev_list_mutex); + +static int zhaoxin_cputemp_online(unsigned int cpu) +{ + int err; + struct platform_device *pdev; + struct pdev_entry *pdev_entry; + + pdev = platform_device_alloc(DRVNAME, cpu); + if (!pdev) { + err = -ENOMEM; + pr_err("Device allocation failed\n"); + goto exit; + } + + pdev_entry = kzalloc(sizeof(struct pdev_entry), GFP_KERNEL); + if (!pdev_entry) { + err = -ENOMEM; + goto exit_device_put; + } + + err = platform_device_add(pdev); + if (err) { + pr_err("Device addition failed (%d)\n", err); + goto exit_device_free; + } + + pdev_entry->pdev = pdev; + pdev_entry->cpu = cpu; + mutex_lock(&pdev_list_mutex); + list_add_tail(&pdev_entry->list, &pdev_list); + mutex_unlock(&pdev_list_mutex); + + return 0; + +exit_device_free: + kfree(pdev_entry); +exit_device_put: + platform_device_put(pdev); +exit: + return err; +} + +static int zhaoxin_cputemp_down_prep(unsigned int cpu) +{ + struct pdev_entry *p; + + mutex_lock(&pdev_list_mutex); + list_for_each_entry(p, &pdev_list, list) { + if (p->cpu == cpu) { + platform_device_unregister(p->pdev); + list_del(&p->list); + mutex_unlock(&pdev_list_mutex); + kfree(p); + return 0; + } + } + mutex_unlock(&pdev_list_mutex); + return 0; +} + +static const struct x86_cpu_id __initconst cputemp_ids[] = { + { X86_VENDOR_CENTAUR, 7, X86_MODEL_ANY, }, + { X86_VENDOR_ZHAOXIN, 7, X86_MODEL_ANY, }, + {} +}; +MODULE_DEVICE_TABLE(x86cpu, cputemp_ids); + +static enum cpuhp_state zhaoxin_temp_online; + +static int __init zhaoxin_cputemp_init(void) +{ + int err; + + if (!x86_match_cpu(cputemp_ids)) + return -ENODEV; + + err = platform_driver_register(&zhaoxin_cputemp_driver); + if (err) + goto exit; + + err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "hwmon/zhaoxin:online", + zhaoxin_cputemp_online, zhaoxin_cputemp_down_prep); + if (err < 0) + goto exit_driver_unreg; + zhaoxin_temp_online = err; + +#ifndef CONFIG_HOTPLUG_CPU + if (list_empty(&pdev_list)) { + err = -ENODEV; + goto exit_hp_unreg; + } +#endif + return 0; + +#ifndef CONFIG_HOTPLUG_CPU +exit_hp_unreg: + cpuhp_remove_state_nocalls(zhaoxin_temp_online); +#endif +exit_driver_unreg: + platform_driver_unregister(&zhaoxin_cputemp_driver); +exit: + return err; +} + +static void __exit zhaoxin_cputemp_exit(void) +{ + cpuhp_remove_state(zhaoxin_temp_online); + platform_driver_unregister(&zhaoxin_cputemp_driver); +} + +MODULE_DESCRIPTION("Zhaoxin CPU temperature monitor"); +MODULE_LICENSE("GPL"); + +module_init(zhaoxin_cputemp_init) +module_exit(zhaoxin_cputemp_exit) -- 2.20.1

1 0

[PATCH openEuler-1.0-LTS 01/15] binder: use euid from cred instead of using task
by Laibin Qiu 15 Apr '22

15 Apr '22

From: Todd Kjos <tkjos(a)google.com> stable inclusion from linux-4.19.218 commit 5d40061285b81a7e213dc9b37acc4a0545eedf32 -------------------------------- commit 29bc22ac5e5bc63275e850f0c8fc549e3d0e306b upstream. Save the 'struct cred' associated with a binder process at initial open to avoid potential race conditions when converting to an euid. Set a transaction's sender_euid from the 'struct cred' saved at binder_open() instead of looking up the euid from the binder proc's 'struct task'. This ensures the euid is associated with the security context that of the task that opened binder. Cc: stable(a)vger.kernel.org # 4.4+ Fixes: 457b9a6f09f0 ("Staging: android: add binder driver") Signed-off-by: Todd Kjos <tkjos(a)google.com> Suggested-by: Stephen Smalley <stephen.smalley.work(a)gmail.com> Suggested-by: Jann Horn <jannh(a)google.com> Acked-by: Casey Schaufler <casey(a)schaufler-ca.com> Signed-off-by: Paul Moore <paul(a)paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Laibin Qiu <qiulaibin(a)huawei.com> --- drivers/android/binder.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/android/binder.c b/drivers/android/binder.c index 18c32637047f..3ba23d29f50a 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -483,6 +483,9 @@ enum binder_deferred_state { * @files files_struct for process * (protected by @files_lock) * @files_lock mutex to protect @files + * @cred struct cred associated with the `struct file` + * in binder_open() + * (invariant after initialized) * @deferred_work_node: element for binder_deferred_list * (protected by binder_deferred_lock) * @deferred_work: bitmap of deferred work to perform @@ -529,6 +532,7 @@ struct binder_proc { struct task_struct *tsk; struct files_struct *files; struct mutex files_lock; + const struct cred *cred; struct hlist_node deferred_work_node; int deferred_work; bool is_dead; @@ -2956,7 +2960,7 @@ static void binder_transaction(struct binder_proc *proc, t->from = thread; else t->from = NULL; - t->sender_euid = task_euid(proc->tsk); + t->sender_euid = proc->cred->euid; t->to_proc = target_proc; t->to_thread = target_thread; t->code = tr->code; @@ -4328,6 +4332,7 @@ static void binder_free_proc(struct binder_proc *proc) BUG_ON(!list_empty(&proc->delivered_death)); binder_alloc_deferred_release(&proc->alloc); put_task_struct(proc->tsk); + put_cred(proc->cred); binder_stats_deleted(BINDER_STAT_PROC); kfree(proc); } @@ -4786,6 +4791,7 @@ static int binder_open(struct inode *nodp, struct file *filp) get_task_struct(current->group_leader); proc->tsk = current->group_leader; mutex_init(&proc->files_lock); + proc->cred = get_cred(filp->f_cred); INIT_LIST_HEAD(&proc->todo); proc->default_priority = task_nice(current); binder_dev = container_of(filp->private_data, struct binder_device, -- 2.22.0

1 14

unsubscribe
by shichuchao 14 Apr '22

14 Apr '22

1 0

欢迎大家参加openEuler开发者大会
by tangjiayuan 13 Apr '22

13 Apr '22

各位好， openEuler开发者大会于4月13-15日线上举报，周四下午14：00内核SIG工作会议，周五下午14：00内核分论坛主题演讲，欢迎大家参与。参与周四下午的SIG工作会议需要注册，麻烦大家提前注册，方便届时接入：https://us06web.zoom.us/webinar/register/WN_nxtHqu_VSbOuWhiP16e-Bw 观看周五下午的内核分论坛主题演讲，请关注官网直播：https://www.openeuler.org/zh/interaction/summit-li… 谢谢大家支持。

1 0

[PATCH OLK-5.10 v1] Driver for Zhaoxin CPU core temperature monitoring
by LeoLiuoc 13 Apr '22

13 Apr '22

zhaoxin inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I52DS7 CVE: NA Add support for the temperature sensor inside CPU. Supported are all known variants of the Zhaoxin processors. v1: Fix some character encoding mistaken. Signed-off-by: LeoLiu-oc <LeoLiu-oc(a)zhaoxin.com> --- drivers/hwmon/Kconfig | 9 + drivers/hwmon/Makefile | 1 + drivers/hwmon/via-cputemp.c | 1 - drivers/hwmon/zhaoxin-cputemp.c | 292 ++++++++++++++++++++++++++++++++ 4 files changed, 302 insertions(+), 1 deletion(-) create mode 100644 drivers/hwmon/zhaoxin-cputemp.c diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 0c2b032ee617..c11c3c46898a 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1889,6 +1889,15 @@ config SENSORS_VIA_CPUTEMP sensor inside your CPU. Supported are all known variants of the VIA C7 and Nano. +config SENSORS_ZHAOXIN_CPUTEMP + tristate "Zhaoxin CPU temperature sensor" + depends on X86 + select HWMON_VID + help + If you say yes here you get support for the temperature + sensor inside your CPU. Supported are all known variants of + the Zhaoxin processors. + config SENSORS_VIA686A tristate "VIA686A" depends on PCI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 9db2903b61e5..2427687972c9 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -184,6 +184,7 @@ obj-$(CONFIG_SENSORS_TMP421) += tmp421.o obj-$(CONFIG_SENSORS_TMP513) += tmp513.o obj-$(CONFIG_SENSORS_VEXPRESS) += vexpress-hwmon.o obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o +obj-$(CONFIG_SENSORS_ZHAOXIN_CPUTEMP) += zhaoxin-cputemp.o obj-$(CONFIG_SENSORS_VIA686A) += via686a.o obj-$(CONFIG_SENSORS_VT1211) += vt1211.o obj-$(CONFIG_SENSORS_VT8231) += vt8231.o diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c index e5d18dac8ee7..0a5057dbe51a 100644 --- a/drivers/hwmon/via-cputemp.c +++ b/drivers/hwmon/via-cputemp.c @@ -273,7 +273,6 @@ static const struct x86_cpu_id __initconst cputemp_ids[] = { X86_MATCH_VENDOR_FAM_MODEL(CENTAUR, 6, X86_CENTAUR_FAM6_C7_A, NULL), X86_MATCH_VENDOR_FAM_MODEL(CENTAUR, 6, X86_CENTAUR_FAM6_C7_D, NULL), X86_MATCH_VENDOR_FAM_MODEL(CENTAUR, 6, X86_CENTAUR_FAM6_NANO, NULL), - X86_MATCH_VENDOR_FAM_MODEL(CENTAUR, 7, X86_MODEL_ANY, NULL), {} }; MODULE_DEVICE_TABLE(x86cpu, cputemp_ids); diff --git a/drivers/hwmon/zhaoxin-cputemp.c b/drivers/hwmon/zhaoxin-cputemp.c new file mode 100644 index 000000000000..dcedb51515f0 --- /dev/null +++ b/drivers/hwmon/zhaoxin-cputemp.c @@ -0,0 +1,292 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * zhaoxin-cputemp.c - Driver for Zhaoxin CPU core temperature monitoring + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/hwmon.h> +#include <linux/hwmon-vid.h> +#include <linux/sysfs.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/list.h> +#include <linux/platform_device.h> +#include <linux/cpu.h> +#include <asm/msr.h> +#include <asm/processor.h> +#include <asm/cpu_device_id.h> + +#define DRVNAME "zhaoxin_cputemp" + +enum { SHOW_TEMP, SHOW_LABEL, SHOW_NAME }; + +/* Functions declaration */ + +struct zhaoxin_cputemp_data { + struct device *hwmon_dev; + const char *name; + u8 vrm; + u32 id; + u32 msr_temp; + u32 msr_vid; +}; + +/* Sysfs stuff */ + +static ssize_t name_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + int ret; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct zhaoxin_cputemp_data *data = dev_get_drvdata(dev); + + if (attr->index == SHOW_NAME) + ret = sprintf(buf, "%s\n", data->name); + else /* show label */ + ret = sprintf(buf, "Core %d\n", data->id); + return ret; +} + +static ssize_t temp_show(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct zhaoxin_cputemp_data *data = dev_get_drvdata(dev); + u32 eax, edx; + int err; + + err = rdmsr_safe_on_cpu(data->id, data->msr_temp, &eax, &edx); + if (err) + return -EAGAIN; + + return sprintf(buf, "%lu\n", ((unsigned long)eax & 0xffffff) * 1000); +} + +static ssize_t cpu0_vid_show(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct zhaoxin_cputemp_data *data = dev_get_drvdata(dev); + u32 eax, edx; + int err; + + err = rdmsr_safe_on_cpu(data->id, data->msr_vid, &eax, &edx); + if (err) + return -EAGAIN; + + return sprintf(buf, "%d\n", vid_from_reg(~edx & 0x7f, data->vrm)); +} + +static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, SHOW_TEMP); +static SENSOR_DEVICE_ATTR_RO(temp1_label, name, SHOW_LABEL); +static SENSOR_DEVICE_ATTR_RO(name, name, SHOW_NAME); + +static struct attribute *zhaoxin_cputemp_attributes[] = { + &sensor_dev_attr_name.dev_attr.attr, + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + NULL +}; + +static const struct attribute_group zhaoxin_cputemp_group = { + .attrs = zhaoxin_cputemp_attributes, +}; + +/* Optional attributes */ +static DEVICE_ATTR_RO(cpu0_vid); + +static int zhaoxin_cputemp_probe(struct platform_device *pdev) +{ + struct zhaoxin_cputemp_data *data; + int err; + u32 eax, edx; + + data = devm_kzalloc(&pdev->dev, sizeof(struct zhaoxin_cputemp_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->id = pdev->id; + data->name = "zhaoxin_cputemp"; + data->msr_temp = 0x1423; + + /* test if we can access the TEMPERATURE MSR */ + err = rdmsr_safe_on_cpu(data->id, data->msr_temp, &eax, &edx); + if (err) { + dev_err(&pdev->dev, "Unable to access TEMPERATURE MSR, giving up\n"); + return err; + } + + platform_set_drvdata(pdev, data); + + err = sysfs_create_group(&pdev->dev.kobj, &zhaoxin_cputemp_group); + if (err) + return err; + + if (data->msr_vid) + data->vrm = vid_which_vrm(); + + if (data->vrm) { + err = device_create_file(&pdev->dev, &dev_attr_cpu0_vid); + if (err) + goto exit_remove; + } + + data->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + dev_err(&pdev->dev, "Class registration failed (%d)\n", err); + goto exit_remove; + } + + return 0; + +exit_remove: + if (data->vrm) + device_remove_file(&pdev->dev, &dev_attr_cpu0_vid); + sysfs_remove_group(&pdev->dev.kobj, &zhaoxin_cputemp_group); + return err; +} + +static int zhaoxin_cputemp_remove(struct platform_device *pdev) +{ + struct zhaoxin_cputemp_data *data = platform_get_drvdata(pdev); + + hwmon_device_unregister(data->hwmon_dev); + if (data->vrm) + device_remove_file(&pdev->dev, &dev_attr_cpu0_vid); + sysfs_remove_group(&pdev->dev.kobj, &zhaoxin_cputemp_group); + return 0; +} + +static struct platform_driver zhaoxin_cputemp_driver = { + .driver = { + .name = DRVNAME, + }, + .probe = zhaoxin_cputemp_probe, + .remove = zhaoxin_cputemp_remove, +}; + +struct pdev_entry { + struct list_head list; + struct platform_device *pdev; + unsigned int cpu; +}; + +static LIST_HEAD(pdev_list); +static DEFINE_MUTEX(pdev_list_mutex); + +static int zhaoxin_cputemp_online(unsigned int cpu) +{ + int err; + struct platform_device *pdev; + struct pdev_entry *pdev_entry; + + pdev = platform_device_alloc(DRVNAME, cpu); + if (!pdev) { + err = -ENOMEM; + pr_err("Device allocation failed\n"); + goto exit; + } + + pdev_entry = kzalloc(sizeof(struct pdev_entry), GFP_KERNEL); + if (!pdev_entry) { + err = -ENOMEM; + goto exit_device_put; + } + + err = platform_device_add(pdev); + if (err) { + pr_err("Device addition failed (%d)\n", err); + goto exit_device_free; + } + + pdev_entry->pdev = pdev; + pdev_entry->cpu = cpu; + mutex_lock(&pdev_list_mutex); + list_add_tail(&pdev_entry->list, &pdev_list); + mutex_unlock(&pdev_list_mutex); + + return 0; + +exit_device_free: + kfree(pdev_entry); +exit_device_put: + platform_device_put(pdev); +exit: + return err; +} + +static int zhaoxin_cputemp_down_prep(unsigned int cpu) +{ + struct pdev_entry *p; + + mutex_lock(&pdev_list_mutex); + list_for_each_entry(p, &pdev_list, list) { + if (p->cpu == cpu) { + platform_device_unregister(p->pdev); + list_del(&p->list); + mutex_unlock(&pdev_list_mutex); + kfree(p); + return 0; + } + } + mutex_unlock(&pdev_list_mutex); + return 0; +} + +static const struct x86_cpu_id __initconst cputemp_ids[] = { + X86_MATCH_VENDOR_FAM_MODEL(CENTAUR, 7, X86_MODEL_ANY, NULL), + X86_MATCH_VENDOR_FAM_MODEL(ZHAOXIN, 7, X86_MODEL_ANY, NULL), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, cputemp_ids); + +static enum cpuhp_state zhaoxin_temp_online; + +static int __init zhaoxin_cputemp_init(void) +{ + int err; + + if (!x86_match_cpu(cputemp_ids)) + return -ENODEV; + + err = platform_driver_register(&zhaoxin_cputemp_driver); + if (err) + goto exit; + + err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "hwmon/zhaoxin:online", + zhaoxin_cputemp_online, zhaoxin_cputemp_down_prep); + if (err < 0) + goto exit_driver_unreg; + zhaoxin_temp_online = err; + +#ifndef CONFIG_HOTPLUG_CPU + if (list_empty(&pdev_list)) { + err = -ENODEV; + goto exit_hp_unreg; + } +#endif + return 0; + +#ifndef CONFIG_HOTPLUG_CPU +exit_hp_unreg: + cpuhp_remove_state_nocalls(zhaoxin_temp_online); +#endif +exit_driver_unreg: + platform_driver_unregister(&zhaoxin_cputemp_driver); +exit: + return err; +} + +static void __exit zhaoxin_cputemp_exit(void) +{ + cpuhp_remove_state(zhaoxin_temp_online); + platform_driver_unregister(&zhaoxin_cputemp_driver); +} + +MODULE_DESCRIPTION("Zhaoxin CPU temperature monitor"); +MODULE_LICENSE("GPL"); + +module_init(zhaoxin_cputemp_init) +module_exit(zhaoxin_cputemp_exit) -- 2.20.1

1 0

[PATCH openEuler-5.10 1/4] swiotlb: fix info leak with DMA_FROM_DEVICE
by Zheng Zengkai 13 Apr '22

13 Apr '22

From: Halil Pasic <pasic(a)linux.ibm.com> mainline inclusion from mainline-v5.17-rc6 commit ddbd89deb7d32b1fbb879f48d68fda1a8ac58e8e category: bugfix bugzilla: 186478, https://gitee.com/src-openeuler/kernel/issues/I503W4 CVE: CVE-2022-0854 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- The problem I'm addressing was discovered by the LTP test covering cve-2018-1000204. A short description of what happens follows: 1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV and a corresponding dxferp. The peculiar thing about this is that TUR is not reading from the device. 2) In sg_start_req() the invocation of blk_rq_map_user() effectively bounces the user-space buffer. As if the device was to transfer into it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") we make sure this first bounce buffer is allocated with GFP_ZERO. 3) For the rest of the story we keep ignoring that we have a TUR, so the device won't touch the buffer we prepare as if the we had a DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device and the buffer allocated by SG is mapped by the function virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here scatter-gather and not scsi generics). This mapping involves bouncing via the swiotlb (we need swiotlb to do virtio in protected guest like s390 Secure Execution, or AMD SEV). 4) When the SCSI TUR is done, we first copy back the content of the second (that is swiotlb) bounce buffer (which most likely contains some previous IO data), to the first bounce buffer, which contains all zeros. Then we copy back the content of the first bounce buffer to the user-space buffer. 5) The test case detects that the buffer, which it zero-initialized, ain't all zeros and fails. One can argue that this is an swiotlb problem, because without swiotlb we leak all zeros, and the swiotlb should be transparent in a sense that it does not affect the outcome (if all other participants are well behaved). Copying the content of the original buffer into the swiotlb buffer is the only way I can think of to make swiotlb transparent in such scenarios. So let's do just that if in doubt, but allow the driver to tell us that the whole mapped buffer is going to be overwritten, in which case we can preserve the old behavior and avoid the performance impact of the extra bounce. Signed-off-by: Halil Pasic <pasic(a)linux.ibm.com> Signed-off-by: Christoph Hellwig <hch(a)lst.de> Conflicts: kernel/dma/swiotlb.c Signed-off-by: Liu Shixin <liushixin2(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Reviewed-by: Weilong Chen <chenweilong(a)huawei.com> --- Documentation/core-api/dma-attributes.rst | 8 ++++++++ include/linux/dma-mapping.h | 8 ++++++++ kernel/dma/swiotlb.c | 3 ++- 3 files changed, 18 insertions(+), 1 deletion(-) diff --git a/Documentation/core-api/dma-attributes.rst b/Documentation/core-api/dma-attributes.rst index 1887d92e8e92..17706dc91ec9 100644 --- a/Documentation/core-api/dma-attributes.rst +++ b/Documentation/core-api/dma-attributes.rst @@ -130,3 +130,11 @@ accesses to DMA buffers in both privileged "supervisor" and unprivileged subsystem that the buffer is fully accessible at the elevated privilege level (and ideally inaccessible or at least read-only at the lesser-privileged levels). + +DMA_ATTR_OVERWRITE +------------------ + +This is a hint to the DMA-mapping subsystem that the device is expected to +overwrite the entire mapped size, thus the caller does not require any of the +previous buffer contents to be preserved. This allows bounce-buffering +implementations to optimise DMA_FROM_DEVICE transfers. diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index a7d70cdee25e..a9361178c5db 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -61,6 +61,14 @@ */ #define DMA_ATTR_PRIVILEGED (1UL << 9) +/* + * This is a hint to the DMA-mapping subsystem that the device is expected + * to overwrite the entire mapped size, thus the caller does not require any + * of the previous buffer contents to be preserved. This allows + * bounce-buffering implementations to optimise DMA_FROM_DEVICE transfers. + */ +#define DMA_ATTR_OVERWRITE (1UL << 10) + /* * A dma_addr_t can hold any valid DMA or bus address for the platform. It can * be given to a device to use as a DMA source or target. It is specific to a diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c index 0ed0e1f215c7..62b1e5fa8673 100644 --- a/kernel/dma/swiotlb.c +++ b/kernel/dma/swiotlb.c @@ -598,7 +598,8 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr, tlb_addr = slot_addr(io_tlb_start, index) + offset; if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) && - (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)) + (!(attrs & DMA_ATTR_OVERWRITE) || dir == DMA_TO_DEVICE || + dir == DMA_BIDIRECTIONAL)) swiotlb_bounce(orig_addr, tlb_addr, mapping_size, DMA_TO_DEVICE); return tlb_addr; } -- 2.20.1

1 3

[PATCH OLK-5.10] Driver for Zhaoxin CPU core temperature monitoring
by LeoLiuoc 12 Apr '22

12 Apr '22

zhaoxin inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I52DS7 CVE: NA Add support for the temperature sensor inside your CPU. Supported are all known variants of the Zhaoxin processors. Signed-off-by: LeoLiu-oc <LeoLiu-oc(a)zhaoxin.com> --- drivers/hwmon/Kconfig | 9 + drivers/hwmon/Makefile | 1 + drivers/hwmon/via-cputemp.c | 1 - drivers/hwmon/zhaoxin-cputemp.c | 292 ++++++++++++++++++++++++++++++++ 4 files changed, 302 insertions(+), 1 deletion(-) create mode 100644 drivers/hwmon/zhaoxin-cputemp.c diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 0c2b032ee617..c11c3c46898a 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1889,6 +1889,15 @@ config SENSORS_VIA_CPUTEMP sensor inside your CPU. Supported are all known variants of the VIA C7 and Nano. +config SENSORS_ZHAOXIN_CPUTEMP + tristate "VIA CPU temperature sensor" + depends on X86 + select HWMON_VID + help + If you say yes here you get support for the temperature + sensor inside your CPU. Supported are all known variants of + the Zhaoxin processors. + config SENSORS_VIA686A tristate "VIA686A" depends on PCI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 9db2903b61e5..2427687972c9 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -184,6 +184,7 @@ obj-$(CONFIG_SENSORS_TMP421) += tmp421.o obj-$(CONFIG_SENSORS_TMP513) += tmp513.o obj-$(CONFIG_SENSORS_VEXPRESS) += vexpress-hwmon.o obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o +obj-$(CONFIG_SENSORS_ZHAOXIN_CPUTEMP) += zhaoxin-cputemp.o obj-$(CONFIG_SENSORS_VIA686A) += via686a.o obj-$(CONFIG_SENSORS_VT1211) += vt1211.o obj-$(CONFIG_SENSORS_VT8231) += vt8231.o diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c index e5d18dac8ee7..0a5057dbe51a 100644 --- a/drivers/hwmon/via-cputemp.c +++ b/drivers/hwmon/via-cputemp.c @@ -273,7 +273,6 @@ static const struct x86_cpu_id __initconst cputemp_ids[] = { X86_MATCH_VENDOR_FAM_MODEL(CENTAUR, 6, X86_CENTAUR_FAM6_C7_A, NULL), X86_MATCH_VENDOR_FAM_MODEL(CENTAUR, 6, X86_CENTAUR_FAM6_C7_D, NULL), X86_MATCH_VENDOR_FAM_MODEL(CENTAUR, 6, X86_CENTAUR_FAM6_NANO, NULL), - X86_MATCH_VENDOR_FAM_MODEL(CENTAUR, 7, X86_MODEL_ANY, NULL), {} }; MODULE_DEVICE_TABLE(x86cpu, cputemp_ids); diff --git a/drivers/hwmon/zhaoxin-cputemp.c b/drivers/hwmon/zhaoxin-cputemp.c new file mode 100644 index 000000000000..dcedb51515f0 --- /dev/null +++ b/drivers/hwmon/zhaoxin-cputemp.c @@ -0,0 +1,292 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * zhaoxin-cputemp.c - Driver for Zhaoxin CPU core temperature monitoring + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/hwmon.h> +#include <linux/hwmon-vid.h> +#include <linux/sysfs.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/list.h> +#include <linux/platform_device.h> +#include <linux/cpu.h> +#include <asm/msr.h> +#include <asm/processor.h> +#include <asm/cpu_device_id.h> + +#define DRVNAME "zhaoxin_cputemp" + +enum { SHOW_TEMP, SHOW_LABEL, SHOW_NAME }; + +/* Functions declaration */ + +struct zhaoxin_cputemp_data { + struct device *hwmon_dev; + const char *name; + u8 vrm; + u32 id; + u32 msr_temp; + u32 msr_vid; +}; + +/* Sysfs stuff */ + +static ssize_t name_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + int ret; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct zhaoxin_cputemp_data *data = dev_get_drvdata(dev); + + if (attr->index == SHOW_NAME) + ret = sprintf(buf, "%s\n", data->name); + else /* show label */ + ret = sprintf(buf, "Core %d\n", data->id); + return ret; +} + +static ssize_t temp_show(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct zhaoxin_cputemp_data *data = dev_get_drvdata(dev); + u32 eax, edx; + int err; + + err = rdmsr_safe_on_cpu(data->id, data->msr_temp, &eax, &edx); + if (err) + return -EAGAIN; + + return sprintf(buf, "%lu\n", ((unsigned long)eax & 0xffffff) * 1000); +} + +static ssize_t cpu0_vid_show(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct zhaoxin_cputemp_data *data = dev_get_drvdata(dev); + u32 eax, edx; + int err; + + err = rdmsr_safe_on_cpu(data->id, data->msr_vid, &eax, &edx); + if (err) + return -EAGAIN; + + return sprintf(buf, "%d\n", vid_from_reg(~edx & 0x7f, data->vrm)); +} + +static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, SHOW_TEMP); +static SENSOR_DEVICE_ATTR_RO(temp1_label, name, SHOW_LABEL); +static SENSOR_DEVICE_ATTR_RO(name, name, SHOW_NAME); + +static struct attribute *zhaoxin_cputemp_attributes[] = { + &sensor_dev_attr_name.dev_attr.attr, + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + NULL +}; + +static const struct attribute_group zhaoxin_cputemp_group = { + .attrs = zhaoxin_cputemp_attributes, +}; + +/* Optional attributes */ +static DEVICE_ATTR_RO(cpu0_vid); + +static int zhaoxin_cputemp_probe(struct platform_device *pdev) +{ + struct zhaoxin_cputemp_data *data; + int err; + u32 eax, edx; + + data = devm_kzalloc(&pdev->dev, sizeof(struct zhaoxin_cputemp_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->id = pdev->id; + data->name = "zhaoxin_cputemp"; + data->msr_temp = 0x1423; + + /* test if we can access the TEMPERATURE MSR */ + err = rdmsr_safe_on_cpu(data->id, data->msr_temp, &eax, &edx); + if (err) { + dev_err(&pdev->dev, "Unable to access TEMPERATURE MSR, giving up\n"); + return err; + } + + platform_set_drvdata(pdev, data); + + err = sysfs_create_group(&pdev->dev.kobj, &zhaoxin_cputemp_group); + if (err) + return err; + + if (data->msr_vid) + data->vrm = vid_which_vrm(); + + if (data->vrm) { + err = device_create_file(&pdev->dev, &dev_attr_cpu0_vid); + if (err) + goto exit_remove; + } + + data->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + dev_err(&pdev->dev, "Class registration failed (%d)\n", err); + goto exit_remove; + } + + return 0; + +exit_remove: + if (data->vrm) + device_remove_file(&pdev->dev, &dev_attr_cpu0_vid); + sysfs_remove_group(&pdev->dev.kobj, &zhaoxin_cputemp_group); + return err; +} + +static int zhaoxin_cputemp_remove(struct platform_device *pdev) +{ + struct zhaoxin_cputemp_data *data = platform_get_drvdata(pdev); + + hwmon_device_unregister(data->hwmon_dev); + if (data->vrm) + device_remove_file(&pdev->dev, &dev_attr_cpu0_vid); + sysfs_remove_group(&pdev->dev.kobj, &zhaoxin_cputemp_group); + return 0; +} + +static struct platform_driver zhaoxin_cputemp_driver = { + .driver = { + .name = DRVNAME, + }, + .probe = zhaoxin_cputemp_probe, + .remove = zhaoxin_cputemp_remove, +}; + +struct pdev_entry { + struct list_head list; + struct platform_device *pdev; + unsigned int cpu; +}; + +static LIST_HEAD(pdev_list); +static DEFINE_MUTEX(pdev_list_mutex); + +static int zhaoxin_cputemp_online(unsigned int cpu) +{ + int err; + struct platform_device *pdev; + struct pdev_entry *pdev_entry; + + pdev = platform_device_alloc(DRVNAME, cpu); + if (!pdev) { + err = -ENOMEM; + pr_err("Device allocation failed\n"); + goto exit; + } + + pdev_entry = kzalloc(sizeof(struct pdev_entry), GFP_KERNEL); + if (!pdev_entry) { + err = -ENOMEM; + goto exit_device_put; + } + + err = platform_device_add(pdev); + if (err) { + pr_err("Device addition failed (%d)\n", err); + goto exit_device_free; + } + + pdev_entry->pdev = pdev; + pdev_entry->cpu = cpu; + mutex_lock(&pdev_list_mutex); + list_add_tail(&pdev_entry->list, &pdev_list); + mutex_unlock(&pdev_list_mutex); + + return 0; + +exit_device_free: + kfree(pdev_entry); +exit_device_put: + platform_device_put(pdev); +exit: + return err; +} + +static int zhaoxin_cputemp_down_prep(unsigned int cpu) +{ + struct pdev_entry *p; + + mutex_lock(&pdev_list_mutex); + list_for_each_entry(p, &pdev_list, list) { + if (p->cpu == cpu) { + platform_device_unregister(p->pdev); + list_del(&p->list); + mutex_unlock(&pdev_list_mutex); + kfree(p); + return 0; + } + } + mutex_unlock(&pdev_list_mutex); + return 0; +} + +static const struct x86_cpu_id __initconst cputemp_ids[] = { + X86_MATCH_VENDOR_FAM_MODEL(CENTAUR, 7, X86_MODEL_ANY, NULL), + X86_MATCH_VENDOR_FAM_MODEL(ZHAOXIN, 7, X86_MODEL_ANY, NULL), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, cputemp_ids); + +static enum cpuhp_state zhaoxin_temp_online; + +static int __init zhaoxin_cputemp_init(void) +{ + int err; + + if (!x86_match_cpu(cputemp_ids)) + return -ENODEV; + + err = platform_driver_register(&zhaoxin_cputemp_driver); + if (err) + goto exit; + + err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "hwmon/zhaoxin:online", + zhaoxin_cputemp_online, zhaoxin_cputemp_down_prep); + if (err < 0) + goto exit_driver_unreg; + zhaoxin_temp_online = err; + +#ifndef CONFIG_HOTPLUG_CPU + if (list_empty(&pdev_list)) { + err = -ENODEV; + goto exit_hp_unreg; + } +#endif + return 0; + +#ifndef CONFIG_HOTPLUG_CPU +exit_hp_unreg: + cpuhp_remove_state_nocalls(zhaoxin_temp_online); +#endif +exit_driver_unreg: + platform_driver_unregister(&zhaoxin_cputemp_driver); +exit: + return err; +} + +static void __exit zhaoxin_cputemp_exit(void) +{ + cpuhp_remove_state(zhaoxin_temp_online); + platform_driver_unregister(&zhaoxin_cputemp_driver); +} + +MODULE_DESCRIPTION("Zhaoxin CPU temperature monitor"); +MODULE_LICENSE("GPL"); + +module_init(zhaoxin_cputemp_init) +module_exit(zhaoxin_cputemp_exit) -- 2.20.1

1 0

[PATCH openEuler-1.0-LTS 01/62] PM: wakeup: simplify the output logic of pm_show_wakelocks()
by Laibin Qiu 12 Apr '22

12 Apr '22

From: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> stable inclusion from linux-4.19.228 commit cf94a8a3ff3d7aa06742f1beb5166fa45ba72122 -------------------------------- commit c9d967b2ce40d71e968eb839f36c936b8a9cf1ea upstream. The buffer handling in pm_show_wakelocks() is tricky, and hopefully correct. Ensure it really is correct by using sysfs_emit_at() which handles all of the tricky string handling logic in a PAGE_SIZE buffer for us automatically as this is a sysfs file being read from. Reviewed-by: Lee Jones <lee.jones(a)linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> Signed-off-by: Laibin Qiu <qiulaibin(a)huawei.com> --- kernel/power/wakelock.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/kernel/power/wakelock.c b/kernel/power/wakelock.c index 4210152e56f0..aad7c8fcb22f 100644 --- a/kernel/power/wakelock.c +++ b/kernel/power/wakelock.c @@ -39,23 +39,19 @@ ssize_t pm_show_wakelocks(char *buf, bool show_active) { struct rb_node *node; struct wakelock *wl; - char *str = buf; - char *end = buf + PAGE_SIZE; + int len = 0; mutex_lock(&wakelocks_lock); for (node = rb_first(&wakelocks_tree); node; node = rb_next(node)) { wl = rb_entry(node, struct wakelock, node); if (wl->ws.active == show_active) - str += scnprintf(str, end - str, "%s ", wl->name); + len += sysfs_emit_at(buf, len, "%s ", wl->name); } - if (str > buf) - str--; - - str += scnprintf(str, end - str, "\n"); + len += sysfs_emit_at(buf, len, "\n"); mutex_unlock(&wakelocks_lock); - return (str - buf); + return len; } #if CONFIG_PM_WAKELOCKS_LIMIT > 0 -- 2.22.0

1 61

[PATCH OLK-5.10] xhci: Fix a logic issue when display Zhaoxin XHCI root hub speed
by LeoLiuoc 11 Apr '22

11 Apr '22

Fix a logic issue when display Zhaoxin XHCI root hub speed. Signed-off-by: LeoLiu-oc <LeoLiu-oc(a)zhaoxin.com> --- drivers/usb/host/xhci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 7f1e5296d0f6..71dcc1ba73ac 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -5261,10 +5261,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) if (XHCI_EXT_PORT_PSIV(xhci->port_caps[j].psi[i]) >= 5) minor_rev = 1; } - if (minor_rev != 1) { - hcd->speed = HCD_USB3; - hcd->self.root_hub->speed = USB_SPEED_SUPER; - } + } + if (minor_rev != 1) { + hcd->speed = HCD_USB3; + hcd->self.root_hub->speed = USB_SPEED_SUPER; } } -- 2.20.1

1 0

[PATCH openEuler-1.0-LTS 1/3] printk: Convert a use of sprintf to snprintf in console_unlock
by Laibin Qiu 11 Apr '22

11 Apr '22

From: Nathan Chancellor <natechancellor(a)gmail.com> mainline inclusion from mainline-v5.8-rc1 commit 5661dd95a2958634485bb1a53f90a6ab621d4b0c category: bugfix bugzilla: 91291 CVE: N/A -------------------------------- When CONFIG_PRINTK is disabled (e.g. when building allnoconfig), clang warns: ../kernel/printk/printk.c:2416:10: warning: 'sprintf' will always overflow; destination buffer has size 0, but format string expands to at least 33 [-Wfortify-source] len = sprintf(text, ^ 1 warning generated. It is not wrong; text has a zero size when CONFIG_PRINTK is disabled because LOG_LINE_MAX and PREFIX_MAX are both zero. Change to snprintf so that this case is explicitly handled without any risk of overflow. Link: https://github.com/ClangBuiltLinux/linux/issues/846 Link: https://github.com/llvm/llvm-project/commit/6d485ff455ea2b37fef9e06e426dae6… Link: http://lkml.kernel.org/r/20200130221644.2273-1-natechancellor@gmail.com Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: linux-kernel(a)vger.kernel.org Cc: clang-built-linux(a)googlegroups.com Signed-off-by: Nathan Chancellor <natechancellor(a)gmail.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky(a)gmail.com> Signed-off-by: Petr Mladek <pmladek(a)suse.com> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Laibin Qiu <qiulaibin(a)huawei.com> --- kernel/printk/printk.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index 0fe45941b5c7..c645a7221d0b 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -2423,9 +2423,9 @@ void console_unlock(void) printk_safe_enter_irqsave(flags); raw_spin_lock(&logbuf_lock); if (console_seq < log_first_seq) { - len = sprintf(text, - "** %llu printk messages dropped **\n", - log_first_seq - console_seq); + len = snprintf(text, sizeof(text), + "** %llu printk messages dropped **\n", + log_first_seq - console_seq); /* messages are gone, move to first one */ console_seq = log_first_seq; -- 2.22.0

1 2