- Kernel - mailweb.openeuler.org

[PATCH v2] net: hns3: remove the unnecessary ccflags
by Zhengyuan Liu 28 Apr '20

28 Apr '20

category: other bugzilla: NA CVE: NA ---------------------------------- The ccflags removed in this patch shouldn't be in open kernel tree. Especially for -fstack-protector-strong, there will be a compile error when CONFIG_STACKPROTECTOR_STRONG isn't enabled. Signed-off-by: Zhengyuan Liu <liuzhengyuan(a)tj.kylinos.cn> --- drivers/net/ethernet/hisilicon/hns3/Makefile | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile b/drivers/net/ethernet/hisilicon/hns3/Makefile index 6653e81..0365f1c 100644 --- a/drivers/net/ethernet/hisilicon/hns3/Makefile +++ b/drivers/net/ethernet/hisilicon/hns3/Makefile @@ -3,15 +3,6 @@ # Makefile for the HISILICON network device drivers. # -# Add security options -ccflags-y += -fstack-protector-strong -ccflags-y += -Wl,-z,relro,-z,now -ccflags-y += -Wl,-z,noexecstack -ccflags-y += -D_FORTIFY_SOURCE=2 -O2 -ccflags-y += -fvisibility=hidden -ccflags-y += -Wformat=2 -Wfloat-equal -ccflags-y += -fsigned-char - ccflags-y += -DCONFIG_IT_VALIDATION ccflags-y += -DCONFIG_HNS3_TEST -- 2.7.4

3 2

Re: [Infra] Re: [Community] 转发：gitee上已更新issue，请及时查收
by Fred Li 27 Apr '20

27 Apr '20

cc kernel(a)openeuler.org. Just for members who may not know, dwadm(a)pcl.ac.cn is from 鹏程实验室 and will help on issues related with VMs in 鹏程实验室。 On Sun, Apr 26, 2020 at 10:08 AM Xie XiuQi via Infra <infra(a)openeuler.org> wrote: > 感谢你的热心参与，我们正在和鹏程实验室的兄弟联合定位 > On 2020/4/25 13:30, Qichen Zhang wrote: > > > Qichen Zhang > 邮箱：17852657226(a)163.com > > <https://maas.mail.163.com/dashi-web-extend/html/proSignature.html?ftlId=1&n…> > > 签名由网易邮箱大师 <https://mail.163.com/dashi/dlpro.html?from=mail88> 定制 > > --------- 转发的邮件 --------- > 发件人： Qichen Zhang <17852657226(a)163.com> > 发送日期： 2020年04月25日 13:26 > 收件人： Xiehong (Cynthia) <xiehong(a)huawei.com> > 抄送人： > 主题：回复：gitee上已更新issue，请及时查收 > 各位工程师 > 你们好! > > bug依然存在，还是报Message > kernel watchdog Bug soft lockup > 在issue上已发布，昨晚上七点多一直等到今天凌晨一点，依然存在bug。 > > 请各位工程师看看如何解决? > 上周五发现的这个bug，不能这么愣着啊 > 你们需要我做什么，阔以直接给我说哈， > 我叫张琦琛，手机号同微信号17852657226 > 希望大家一起努力尽快解决这个bug > > 盼回复 > > > Qichen Zhang > 邮箱：17852657226(a)163.com > > <https://maas.mail.163.com/dashi-web-extend/html/proSignature.html?ftlId=1&n…> > > 签名由网易邮箱大师 <https://mail.163.com/dashi/dlpro.html?from=mail88> 定制 > > 在2020年04月21日 14:17，Xiehong (Cynthia) <xiehong(a)huawei.com> 写道： > > HI > > > > 多谢！ > > > > 我们会在社区上的ISSUE系统上继续跟踪。 > > > > > > *发件人:* Qichen Zhang [mailto:17852657226@163.com] > *发送时间:* 2020年4月21日 13:27 > *收件人:* Xiehong (Cynthia) <xiehong(a)huawei.com> > *主题:* gitee上已更新issue，请及时查收 > > > > 尊敬的工程师 > > 您好！ > > > > 我已在 gitee 上已更新issue，请及时查收 > > https://gitee.com/openeuler/community/issues/I1F13I?from=project-issue > > 很乐意和大家一块解决这个bug。 > > — — > > Qichen Zhang > > > _______________________________________________ > Community mailing list -- community(a)openeuler.org > To unsubscribe send an email to community-leave(a)openeuler.org > > _______________________________________________ > Infra mailing list -- infra(a)openeuler.org > To unsubscribe send an email to infra-leave(a)openeuler.org > -- Regards Fred Li (李永乐)

1 0

[PATCH 01/25] net: hns3: merge mac state HCLGE_MAC_TO_DEL and HCLGE_MAC_DEL_FAIL
by Yang Yingliang 26 Apr '20

26 Apr '20

From: shenhao <shenhao21(a)huawei.com> driver inclusion category: bugfix bugzilla: NA CVE: NA -------------------------------------------- HCLGE_MAC_DEL_FAIL is a middle state for mac address handling, it can be merged with HCLGE_MAC_TO_DEL. Btw, this patch also change the enum name from HCLGE_MAC_ADDR_STATE to HCLGE_MAC_NODE_STATE, for it's used to indicate the state of mac node. Signed-off-by: Jian Shen <shenjian15(a)huawei.com> Signed-off-by: shenhao <shenhao21(a)huawei.com> Reviewed-by: Zhong Zhaohui <zhongzhaohui(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 46 ++++++++++------------ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 9 ++--- 2 files changed, 25 insertions(+), 30 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 478a3b5..d985c68 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -7422,14 +7422,13 @@ static void hclge_update_umv_space(struct hclge_vport *vport, bool is_free) return NULL; } -static void hclge_mac_node_convert(struct hclge_vport_mac_addr_cfg *mac_node, - enum HCLGE_MAC_ADDR_STATE state) +static void hclge_update_mac_node(struct hclge_vport_mac_addr_cfg *mac_node, + enum HCLGE_MAC_NODE_STATE state) { switch (state) { /* from set_rx_mode or tmp_add_list */ case HCLGE_MAC_TO_ADD: - if (mac_node->state == HCLGE_MAC_TO_DEL || - mac_node->state == HCLGE_MAC_DEL_FAIL) + if (mac_node->state == HCLGE_MAC_TO_DEL) mac_node->state = HCLGE_MAC_ACTIVE; break; /* only from set_rx_mode */ @@ -7442,14 +7441,7 @@ static void hclge_mac_node_convert(struct hclge_vport_mac_addr_cfg *mac_node, } break; /* only from tmp_add_list, the mac_node->state won't be - * HCLGE_MAC_ACTIVE/HCLGE_MAC_DEL_FAIL/HCLGE_MAC_ADD_FAIL - */ - case HCLGE_MAC_DEL_FAIL: - if (mac_node->state == HCLGE_MAC_TO_ADD) - mac_node->state = HCLGE_MAC_ACTIVE; - break; - /* only from tmp_add_list, the mac_node->state won't be - * HCLGE_MAC_ACTIVE/HCLGE_MAC_DEL_FAIL/HCLGE_MAC_ADD_FAIL + * ACTIVE. */ case HCLGE_MAC_ACTIVE: if (mac_node->state == HCLGE_MAC_TO_ADD) @@ -7460,7 +7452,7 @@ static void hclge_mac_node_convert(struct hclge_vport_mac_addr_cfg *mac_node, } int hclge_update_mac_list(struct hclge_vport *vport, - enum HCLGE_MAC_ADDR_STATE state, + enum HCLGE_MAC_NODE_STATE state, enum HCLGE_MAC_ADDR_TYPE mac_type, const unsigned char *addr) { @@ -7480,7 +7472,7 @@ int hclge_update_mac_list(struct hclge_vport *vport, */ mac_node = hclge_find_mac_node(list, addr); if (mac_node) { - hclge_mac_node_convert(mac_node, state); + hclge_update_mac_node(mac_node, state); spin_unlock_bh(&vport->mac_list_lock); return 0; } @@ -7731,7 +7723,6 @@ static void hclge_unsync_mac_list(struct hclge_vport *vport, list_del(&mac_node->node); kfree(mac_node); } else { - mac_node->state = HCLGE_MAC_DEL_FAIL; set_bit(HCLGE_VPORT_STATE_MAC_TBL_CHANGE, &vport->state); break; @@ -7753,13 +7744,13 @@ static bool hclge_sync_from_add_list(struct list_head *add_list, * uc/mc_mac_list, it means have received a TO_DEL request * during the time window of adding the mac address into mac * table. if mac_node state is ACTIVE, then change it to TO_DEL, - * then it will be removed at next time. else it must be TO_ADD - * or ADD_FAIL, this address hasn't been added into mac table, + * then it will be removed at next time. else it must be TO_ADD, + * this address hasn't been added into mac table, * so just remove the mac node. */ new_node = hclge_find_mac_node(mac_list, mac_node->mac_addr); if (new_node) { - hclge_mac_node_convert(new_node, mac_node->state); + hclge_update_mac_node(new_node, mac_node->state); list_del(&mac_node->node); kfree(mac_node); } else if (mac_node->state == HCLGE_MAC_ACTIVE) { @@ -7782,7 +7773,16 @@ static void hclge_sync_from_del_list(struct list_head *del_list, list_for_each_entry_safe(mac_node, tmp, del_list, node) { new_node = hclge_find_mac_node(mac_list, mac_node->mac_addr); if (new_node) { - hclge_mac_node_convert(new_node, mac_node->state); + /* If the mac addr exists in the mac list, it means + * received a new TO_ADD request during the time window + * of configuring the mac address. For the mac node + * state is TO_ADD, and the address is already in the + * in the hardware(due to delete fail), so we just need + * to change the mac node state to ACTIVE. + */ + new_node->state = HCLGE_MAC_ACTIVE; + list_del(&mac_node->node); + kfree(mac_node); } else { list_del(&mac_node->node); list_add_tail(&mac_node->node, mac_list); @@ -7850,7 +7850,6 @@ static void hclge_sync_vport_mac_table(struct hclge_vport *vport, list_for_each_entry_safe(mac_node, tmp, list, node) { switch (mac_node->state) { case HCLGE_MAC_TO_DEL: - case HCLGE_MAC_DEL_FAIL: list_del(&mac_node->node); list_add_tail(&mac_node->node, &tmp_del_list); break; @@ -7962,7 +7961,6 @@ void hclge_rm_vport_all_mac_table(struct hclge_vport *vport, bool is_del_list, list_for_each_entry_safe(mac_cfg, tmp, list, node) { switch (mac_cfg->state) { case HCLGE_MAC_TO_DEL: - case HCLGE_MAC_DEL_FAIL: case HCLGE_MAC_ACTIVE: list_del(&mac_cfg->node); list_add_tail(&mac_cfg->node, &tmp_del_list); @@ -8021,7 +8019,6 @@ static void hclge_uninit_mac_list(struct hclge_vport *vport, list_for_each_entry_safe(mac_node, tmp, list, node) { switch (mac_node->state) { case HCLGE_MAC_TO_DEL: - case HCLGE_MAC_DEL_FAIL: case HCLGE_MAC_ACTIVE: list_del(&mac_node->node); list_add_tail(&mac_node->node, &tmp_del_list); @@ -8221,7 +8218,7 @@ void hclge_replace_mac_node(struct list_head *list, const u8 *old_addr, } void hclge_modify_mac_node_state(struct list_head *list, const u8 *addr, - enum HCLGE_MAC_ADDR_STATE state) + enum HCLGE_MAC_NODE_STATE state) { struct hclge_vport_mac_addr_cfg *mac_node; @@ -8989,8 +8986,7 @@ static void hclge_mac_node_convert_for_reset(struct list_head *list) list_for_each_entry_safe(mac_node, tmp, list, node) { if (mac_node->state == HCLGE_MAC_ACTIVE) { mac_node->state = HCLGE_MAC_TO_ADD; - } else if (mac_node->state == HCLGE_MAC_TO_DEL || - mac_node->state == HCLGE_MAC_DEL_FAIL) { + } else if (mac_node->state == HCLGE_MAC_TO_DEL) { list_del(&mac_node->node); kfree(mac_node); } diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h index 5e462cf..a1fa782 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h @@ -640,16 +640,15 @@ struct hclge_fd_ad_data { u16 rule_id; }; -enum HCLGE_MAC_ADDR_STATE { +enum HCLGE_MAC_NODE_STATE { HCLGE_MAC_TO_ADD, HCLGE_MAC_TO_DEL, - HCLGE_MAC_DEL_FAIL, HCLGE_MAC_ACTIVE }; struct hclge_vport_mac_addr_cfg { struct list_head node; - enum HCLGE_MAC_ADDR_STATE state; + enum HCLGE_MAC_NODE_STATE state; u8 mac_addr[ETH_ALEN]; }; @@ -1016,13 +1015,13 @@ int hclge_set_vlan_filter(struct hnae3_handle *handle, __be16 proto, int hclge_notify_client(struct hclge_dev *hdev, enum hnae3_reset_notify_type type); int hclge_update_mac_list(struct hclge_vport *vport, - enum HCLGE_MAC_ADDR_STATE state, + enum HCLGE_MAC_NODE_STATE state, enum HCLGE_MAC_ADDR_TYPE mac_type, const unsigned char *addr); void hclge_replace_mac_node(struct list_head *list, const u8 *old_addr, const u8 *new_addr, bool keep_old); void hclge_modify_mac_node_state(struct list_head *list, const u8 *addr, - enum HCLGE_MAC_ADDR_STATE state); + enum HCLGE_MAC_NODE_STATE state); void hclge_rm_vport_all_mac_table(struct hclge_vport *vport, bool is_del_list, enum HCLGE_MAC_ADDR_TYPE mac_type); void hclge_rm_vport_all_vlan_table(struct hclge_vport *vport, bool is_del_list); -- 1.8.3

1 24

[PATCH] ACPI: GED: implement powerkey evged freeze function
by Hongbo Yao 24 Apr '20

24 Apr '20

From: Huang jun <huangjun61(a)huawei.com> If we want acpi ged to support wake from freeze, we need to implement the suspend/resume function. In these two methods, ACPI's _GPO, GPP method is called to realize the setting of sleep flag and anti-shake. Signed-off-by: Huangjun <huangjun63(a)huawei.com> --- drivers/acpi/evged.c | 108 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) diff --git a/drivers/acpi/evged.c b/drivers/acpi/evged.c index f13ba2c07667..dde8fbff8d19 100644 --- a/drivers/acpi/evged.c +++ b/drivers/acpi/evged.c @@ -46,11 +46,20 @@ #include <linux/list.h> #include <linux/platform_device.h> #include <linux/acpi.h> +#include <linux/timer.h> +#include <linux/jiffies.h> #define MODULE_NAME "acpi-ged" +struct acpi_ged_handle { + struct timer_list timer;/* For 4s anti-shake of power button */ + acpi_handle gpp_handle; /* ACPI Handle: enable shutdown */ + acpi_handle gpo_handle; /* ACPI Handle: set sleep flag */ +}; + struct acpi_ged_device { struct device *dev; + struct acpi_ged_handle *wakeup_handle; struct list_head event_list; }; @@ -131,6 +140,34 @@ static acpi_status acpi_ged_request_interrupt(struct acpi_resource *ares, return AE_OK; } +#ifdef CONFIG_PM_SLEEP +static void init_ged_handle(struct acpi_ged_device *geddev) { + struct acpi_ged_handle *wakeup_handle; + acpi_handle gpo_handle = NULL; + acpi_handle gpp_handle = NULL; + acpi_status acpi_ret; + + wakeup_handle = devm_kzalloc(geddev->dev, sizeof(*wakeup_handle), GFP_KERNEL); + if (!wakeup_handle) + return; + + geddev->wakeup_handle = wakeup_handle; + + /* Initialize wakeup_handle, prepare for ged suspend and resume */ + timer_setup(&wakeup_handle->timer, NULL, 0); + + acpi_ret = acpi_get_handle(ACPI_HANDLE(geddev->dev), "_GPO", &gpo_handle); + if (ACPI_FAILURE(acpi_ret)) + dev_info(geddev->dev, "cannot locate _GPO method\n"); + wakeup_handle->gpo_handle = gpo_handle; + + acpi_ret = acpi_get_handle(ACPI_HANDLE(geddev->dev), "_GPP", &gpp_handle); + if (ACPI_FAILURE(acpi_ret)) + dev_info(geddev->dev, "cannot locate _GPP method\n"); + wakeup_handle->gpp_handle = gpp_handle; +} +#endif + static int ged_probe(struct platform_device *pdev) { struct acpi_ged_device *geddev; @@ -149,6 +186,9 @@ static int ged_probe(struct platform_device *pdev) return -EINVAL; } platform_set_drvdata(pdev, geddev); +#ifdef CONFIG_PM_SLEEP + init_ged_handle(geddev); +#endif return 0; } @@ -164,6 +204,10 @@ static void ged_shutdown(struct platform_device *pdev) dev_dbg(geddev->dev, "GED releasing GSI %u @ IRQ %u\n", event->gsi, event->irq); } + + if (geddev->wakeup_handle) + del_timer(&geddev->wakeup_handle->timer); + } static int ged_remove(struct platform_device *pdev) @@ -172,6 +216,67 @@ static int ged_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static void ged_timer_callback(struct timer_list *t) +{ + struct acpi_ged_handle *wakeup_handle = from_timer(wakeup_handle, t, timer); + acpi_status acpi_ret; + + /* _GPP method enable power button */ + if (wakeup_handle && wakeup_handle->gpp_handle) { + acpi_ret = acpi_execute_simple_method(wakeup_handle->gpp_handle, NULL, ACPI_IRQ_MODEL_GIC); + if (ACPI_FAILURE(acpi_ret)) + pr_warn("_GPP method execution failed\n"); + } +} + +static int ged_suspend(struct device *dev) +{ + struct acpi_ged_device *geddev = dev_get_drvdata(dev); + struct acpi_ged_handle *wakeup_handle = geddev->wakeup_handle; + struct acpi_ged_event *event, *next; + acpi_status acpi_ret; + + /* _GPO method set sleep flag */ + if (wakeup_handle && wakeup_handle->gpo_handle) { + acpi_ret = acpi_execute_simple_method(wakeup_handle->gpo_handle, NULL, ACPI_IRQ_MODEL_GIC); + if (ACPI_FAILURE(acpi_ret)) { + pr_warn("_GPO method execution failed\n"); + return AE_ERROR; + } + } + + list_for_each_entry_safe(event, next, &geddev->event_list, node) + enable_irq_wake(event->irq); + + return 0; +} + +static int ged_resume(struct device *dev) +{ + struct acpi_ged_device *geddev = dev_get_drvdata(dev); + struct acpi_ged_handle *wakeup_handle = geddev->wakeup_handle; + struct acpi_ged_event *event, *next; + + /* use timer to complete 4s anti-shake */ + if (wakeup_handle && wakeup_handle->gpp_handle) { + wakeup_handle->timer.expires = jiffies + (4 * HZ); + wakeup_handle->timer.function = ged_timer_callback; + add_timer(&wakeup_handle->timer); + } + + list_for_each_entry_safe(event, next, &geddev->event_list, node) + disable_irq_wake(event->irq); + + return 0; +} + +static const struct dev_pm_ops ged_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(ged_suspend, ged_resume) +}; +#endif + + static const struct acpi_device_id ged_acpi_ids[] = { {"ACPI0013"}, {}, @@ -184,6 +289,9 @@ static struct platform_driver ged_driver = { .driver = { .name = MODULE_NAME, .acpi_match_table = ACPI_PTR(ged_acpi_ids), +#ifdef CONFIG_PM_SLEEP + .pm = &ged_pm_ops, +#endif }, }; builtin_platform_driver(ged_driver); -- 2.20.1

1 1

[PATCH 00/41] Backport lts patches from Linux-4.19.117
by Yang Yingliang 24 Apr '20

24 Apr '20

Alexei Avshalom Lazar (1): wil6210: add general initialization/size checks Amir Goldstein (1): ovl: fix value of i_ino for lower hardlink corner case Austin Kim (1): mm/vmalloc.c: move 'area->pages' after if statement Can Guo (1): scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic Colin Ian King (2): ASoC: Intel: mrfld: fix incorrect check on p->sink ASoC: Intel: mrfld: return error codes when an error occurs DENG Qingfang (1): net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode Dedy Lansky (2): wil6210: check rx_buff_mgmt before accessing it wil6210: make sure Rx ring sizes are correlated Florian Fainelli (1): net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes Greg Kroah-Hartman (1): Linux 4.19.117 James Morse (1): x86/resctrl: Preserve CDP enable over CPU hotplug Jan Kara (1): ext4: do not zeroout extents beyond i_disksize Jim Mattson (1): kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD John Allen (1): x86/microcode/AMD: Increase microcode PATCH_MAX_SIZE Josef Bacik (1): btrfs: check commit root generation in should_ignore_root Josh Triplett (2): ext4: fix incorrect group count in ext4_fill_super error message ext4: fix incorrect inodes per group in error message Karthick Gopalasubramanian (1): wil6210: remove reset file from debugfs Konstantin Khlebnikov (1): net: revert default NAPI poll timeout to 2 jiffies Maurizio Lombardi (2): scsi: target: remove boilerplate code scsi: target: fix hang when multiple threads try to destroy the same iscsi session Maya Erez (1): wil6210: ignore HALP ICR if already handled Reinette Chatre (1): x86/resctrl: Fix invalid attempt at removing the default resource group Sasha Levin (1): usb: dwc3: gadget: don't enable interrupt when disabling endpoint Sebastian Andrzej Siewior (1): amd-xgbe: Use __napi_schedule() in BH context Sergei Lopatin (1): drm/amd/powerplay: force the trim of the mclk dpm_levels if OD is enabled Sven Van Asbroeck (1): pwm: pca9685: Fix PWM/GPIO inter-operation Taehee Yoo (1): hsr: check protocol version in hsr_newlink() Takashi Iwai (4): ALSA: usb-audio: Filter error from connector kctl ops, too ALSA: usb-audio: Don't override ignore_ctl_error value from the map ALSA: usb-audio: Don't create jack controls for PCM terminals ALSA: usb-audio: Check mapping at creating connector controls, too Taras Chornyi (1): net: ipv4: devinet: Fix crash when add/del multicast IP with autojoin Thinh Nguyen (1): usb: dwc3: gadget: Don't clear flags before transfer ended Tim Stallard (1): net: ipv6: do not consider routes via gateways for anycast address check Tuomas Tynkkynen (1): mac80211_hwsim: Use kstrndup() in place of kasprintf() Vasily Averin (1): keys: Fix proc_keys_next to increase position index Wang Wenhu (1): net: qrtr: send msgs from local of same id as broadcast Xiao Yang (1): tracing: Fix the race between registering 'snapshot' event trigger and triggering 'snapshot' operation zhangyi (F) (1): jbd2: improve comments about freeing data buffers whose page mapping is NULL Makefile | 2 +- arch/x86/include/asm/microcode_amd.h | 2 +- arch/x86/kernel/cpu/intel_rdt.c | 2 + arch/x86/kernel/cpu/intel_rdt.h | 1 + arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 16 ++++- arch/x86/kvm/cpuid.c | 3 +- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 5 +- drivers/net/dsa/mt7530.c | 18 +++-- drivers/net/dsa/mt7530.h | 7 ++ drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 2 +- drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 2 + drivers/net/wireless/ath/wil6210/debugfs.c | 29 +------- drivers/net/wireless/ath/wil6210/interrupt.c | 12 ++-- drivers/net/wireless/ath/wil6210/main.c | 5 +- drivers/net/wireless/ath/wil6210/txrx.c | 4 +- drivers/net/wireless/ath/wil6210/txrx_edma.c | 14 +++- drivers/net/wireless/ath/wil6210/wil6210.h | 3 +- drivers/net/wireless/ath/wil6210/wmi.c | 2 +- drivers/net/wireless/mac80211_hwsim.c | 12 ++-- drivers/pwm/pwm-pca9685.c | 85 +++++++++++++---------- drivers/scsi/ufs/ufshcd.c | 5 ++ drivers/target/iscsi/iscsi_target.c | 79 ++++++--------------- drivers/target/iscsi/iscsi_target.h | 1 - drivers/target/iscsi/iscsi_target_configfs.c | 5 +- drivers/target/iscsi/iscsi_target_login.c | 5 +- drivers/usb/dwc3/gadget.c | 18 ++--- fs/btrfs/relocation.c | 4 +- fs/ext4/extents.c | 8 +-- fs/ext4/super.c | 6 +- fs/jbd2/commit.c | 7 +- fs/overlayfs/inode.c | 4 +- include/net/ip6_route.h | 1 + include/target/iscsi/iscsi_target_core.h | 2 +- kernel/trace/trace_events_trigger.c | 10 +-- mm/vmalloc.c | 8 ++- net/core/dev.c | 3 +- net/hsr/hsr_netlink.c | 10 ++- net/ipv4/devinet.c | 13 ++-- net/qrtr/qrtr.c | 7 +- security/keys/proc.c | 2 + sound/soc/intel/atom/sst-atom-controls.c | 2 +- sound/soc/intel/atom/sst/sst_pci.c | 2 +- sound/usb/mixer.c | 31 +++++---- sound/usb/mixer_maps.c | 4 +- 44 files changed, 251 insertions(+), 212 deletions(-) -- 1.8.3

1 41

[PATCH] btrfs: tree-checker: Enhance chunk checker to validate chunk profile
by Yang Yingliang 22 Apr '20

22 Apr '20

From: Qu Wenruo <wqu(a)suse.com> mainline inclusion from mainline-v5.2-rc1 commit 80e46cf22ba0bcb57b39c7c3b52961ab3a0fd5f2 category: bugfix bugzilla: 13690 CVE: CVE-2019-19378 ------------------------------------------------- Btrfs-progs already have a comprehensive type checker, to ensure there is only 0 (SINGLE profile) or 1 (DUP/RAID0/1/5/6/10) bit set for chunk profile bits. Do the same work for kernel. Reported-by: Yoon Jungyeon <jungyeon(a)gatech.edu> Link: https://bugzilla.kernel.org/show_bug.cgi?id=202765 Reviewed-by: Nikolay Borisov <nborisov(a)suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn(a)suse.de> Signed-off-by: Qu Wenruo <wqu(a)suse.com> Reviewed-by: David Sterba <dsterba(a)suse.com> Signed-off-by: David Sterba <dsterba(a)suse.com> Conflicts: fs/btrfs/volumes.c [yyl: btrfs_check_chunk_valid() is defined in fs/btrfs/volumes.c] Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/btrfs/volumes.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 99260d2..110cdfd 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -6391,6 +6391,14 @@ static int btrfs_check_chunk_valid(struct btrfs_fs_info *fs_info, return -EIO; } + if (!is_power_of_2(type & BTRFS_BLOCK_GROUP_PROFILE_MASK) && + (type & BTRFS_BLOCK_GROUP_PROFILE_MASK) != 0) { + btrfs_err(fs_info, + "invalid chunk profile flag: 0x%llx, expect 0 or 1 bit set", + type & BTRFS_BLOCK_GROUP_PROFILE_MASK); + return -EIO; + } + if ((type & BTRFS_BLOCK_GROUP_TYPE_MASK) == 0) { btrfs_err(fs_info, "missing chunk type flag: 0x%llx", type); return -EIO; -- 1.8.3

1 0

[PATCH] livepatch/core: fix kabi for klp_rel_state
by Yang Yingliang 22 Apr '20

22 Apr '20

From: Cheng Jian <cj.chengjian(a)huawei.com> hulk inclusion category: feature bugzilla: 5391/28338/24634 CVE: NA ----------------------------------------------- The previous patch added a field klp_rel_state in the module structure, which caused KABI changes, so fix this problem Signed-off-by: Cheng Jian <cj.chengjian(a)huawei.com> Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- include/linux/module.h | 33 ++++++++++++++++++++------------- 1 file changed, 20 insertions(+), 13 deletions(-) diff --git a/include/linux/module.h b/include/linux/module.h index 4994243..e1f3418 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -469,19 +469,6 @@ struct module { /* Elf information */ struct klp_modinfo *klp_info; - /* - * livepatch should relocate the key of jump_label by - * using klp_write_module_reloc. So it's necessary to - * do jump_label_apply_nops() and jump_label_add_module() - * later after livepatch relocation finised. - * - * for normal module : - * always MODULE_KLP_REL_DONE. - * for livepatch module : - * init as MODULE_KLP_REL_UNDO, - * set to MODULE_KLP_REL_DONE when relocate completed. - */ - enum MODULE_KLP_REL_STATE klp_rel_state; #endif #ifdef CONFIG_MODULE_UNLOAD @@ -507,7 +494,27 @@ struct module { unsigned int num_ei_funcs; #endif +#if defined(CONFIG_LIVEPATCH) && !defined(__GENKSYMS__) + union { + /* + * livepatch should relocate the key of jump_label by + * using klp_write_module_reloc. So it's necessary to + * do jump_label_apply_nops() and jump_label_add_module() + * later after livepatch relocation finised. + * + * for normal module : + * always MODULE_KLP_REL_DONE. + * for livepatch module : + * init as MODULE_KLP_REL_UNDO, + * set to MODULE_KLP_REL_DONE when relocate completed. + */ + enum MODULE_KLP_REL_STATE klp_rel_state; + long klp_rel_state_KABI; + }; +#else KABI_RESERVE(1) +#endif + KABI_RESERVE(2) KABI_RESERVE(3) KABI_RESERVE(4) -- 1.8.3

1 0

[PATCH v1] scsi: hisi_sas: do not reset the timer to wait for phyup when phy already up
by Luo Jiaxing 22 Apr '20

22 Apr '20

We found out that after phy up, the hardware report another oob interrupt, but did not follow a phy up interrupt. like: oob ready -> phy up -> DEV found -> oob read -> wait phy up -> timeout We run link reset when wait phy up timeout, and it make a normal disk into reset processing. So we made some circumvention action in the code, so that this abnormal oob interrupt will not start the timer to wait for phy up. Signed-off-by: Luo Jiaxing <luojiaxing(a)huawei.com> Signed-off-by: John Garry <john.garry(a)huawei.com> --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index acf2fc6..5b80856 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -1898,8 +1898,11 @@ static void handle_chl_int0_v3_hw(struct hisi_hba *hisi_hba, int phy_no) if (irq_value0 & CHL_INT0_PHY_RDY_MSK) { struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no]; + dev_dbg(dev, "phy%d OOB ready\n", phy_no); + if (phy->phy_attached) + return; + if (!timer_pending(&phy->timer)) { - dev_dbg(dev, "phy%d OOB ready\n", phy_no); phy->timer.function = wait_phyup_timedout_v3_hw; phy->timer.expires = jiffies + WAIT_PHYUP_TIMEOUT_V3_HW * HZ; -- 2.7.4

1 0

How to get the patches openEuler 20.03 LTS Kernel has
by Fred Li 22 Apr '20

22 Apr '20

Hi all, We are frequently asked what patches kernel has comparing with Kernel 4.19. [1] shows how to find them and hope it helps. If more information is needed, please leave messages in the issue [1]. [1] https://gitee.com/openeuler/kernel/issues/I1F430 -- Regards Fred Li (李永乐)

1 0

[PATCH] net: hns3: add suspend/resume function for hns3 driver
by Jian Shen 21 Apr '20

21 Apr '20

From: Hao Shen <shenhao21(a)huawei.com> The suspend and resume feature is useful when you want to save the current state of your machine, and continue work later from the same state. This patch makes the hns3 net device work form the same state after s3 and s4. Signed-off-by: Weiwei Deng <dengweiwei(a)huawei.com> Signed-off-by: Hao Shen <shenhao21(a)huawei.com> Signed-off-by: Jian Shen <shenjian15(a)huawei.com> --- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 32 ++++++++++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 70 ++++++++++++++++++++++ 3 files changed, 104 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h index bb29b46..8b1e690 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h @@ -561,6 +561,8 @@ struct hnae3_ae_ops { int (*set_vf_mac)(struct hnae3_handle *handle, int vf, u8 *p); int (*get_module_eeprom)(struct hnae3_handle *handle, u32 offset, u32 len, u8 *data); + int (*suspend)(struct hnae3_ae_dev *ae_dev); + int (*resume)(struct hnae3_ae_dev *ae_dev); }; struct hnae3_dcb_ops { diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 4eca8cf..de3d37c3 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -2226,6 +2226,34 @@ static void hns3_shutdown(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D3hot); } +#ifdef CONFIG_PM +static int hns3_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct hnae3_ae_dev *ae_dev = pci_get_drvdata(pdev); + + if (ae_dev->ops->suspend) + ae_dev->ops->suspend(ae_dev); + + pci_save_state(pdev); + pci_set_power_state(pdev, PCI_D3hot); + + return 0; +} + +static int hns3_resume(struct pci_dev *pdev) +{ + struct hnae3_ae_dev *ae_dev = pci_get_drvdata(pdev); + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + if (ae_dev->ops->resume) + return ae_dev->ops->resume(ae_dev); + + return 0; +} +#endif + static pci_ers_result_t hns3_error_detected(struct pci_dev *pdev, pci_channel_state_t state) { @@ -2310,6 +2338,10 @@ struct pci_driver hns3_driver = { .probe = hns3_probe, .remove = hns3_remove, .shutdown = hns3_shutdown, +#ifdef CONFIG_PM + .suspend = hns3_suspend, + .resume = hns3_resume, +#endif .sriov_configure = hns3_pci_sriov_configure, .err_handler = &hns3_err_handler, }; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index c2ae05f..478a3b5 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -3820,6 +3820,72 @@ static void hclge_reset(struct hclge_dev *hdev) hclge_reset_task_schedule(hdev); } +#ifdef CONFIG_PM +static int hclge_suspend(struct hnae3_ae_dev *ae_dev) +{ + struct hclge_dev *hdev = ae_dev->priv; + int ret; + + ret = hclge_notify_roce_client(hdev, HNAE3_DOWN_CLIENT); + if (ret) + return ret; + + rtnl_lock(); + + ret = hclge_notify_client(hdev, HNAE3_DOWN_CLIENT); + if (ret) + goto err_reset_lock; + + ret = hclge_notify_client(hdev, HNAE3_UNINIT_CLIENT); + if (ret) + goto err_reset_lock; + + rtnl_unlock(); + + return hclge_notify_roce_client(hdev, HNAE3_UNINIT_CLIENT); + +err_reset_lock: + rtnl_unlock(); + return ret; +} + +static int hclge_resume(struct hnae3_ae_dev *ae_dev) +{ + struct hclge_dev *hdev = ae_dev->priv; + int ret; + + rtnl_lock(); + + ret = hclge_reset_ae_dev(hdev->ae_dev); + if (ret) + goto err_reset_lock; + + ret = hclge_notify_client(hdev, HNAE3_INIT_CLIENT); + if (ret) + goto err_reset_lock; + + rtnl_unlock(); + + ret = hclge_notify_roce_client(hdev, HNAE3_INIT_CLIENT); + if (ret) + goto err_reset_lock; + + rtnl_lock(); + + ret = hclge_notify_client(hdev, HNAE3_UP_CLIENT); + if (ret) + goto err_reset_lock; + + rtnl_unlock(); + + return hclge_notify_roce_client(hdev, HNAE3_UP_CLIENT); + +err_reset_lock: + rtnl_unlock(); + return ret; +} +#endif + static void hclge_reset_event(struct pci_dev *pdev, struct hnae3_handle *handle) { struct hnae3_ae_dev *ae_dev = pci_get_drvdata(pdev); @@ -11525,6 +11591,10 @@ struct hnae3_ae_ops hclge_ops = { .set_vf_rate = hclge_set_vf_rate, .set_vf_mac = hclge_set_vf_mac, .get_module_eeprom = hclge_get_module_eeprom, +#ifdef CONFIG_PM + .suspend = hclge_suspend, + .resume = hclge_resume, +#endif }; static struct hnae3_ae_algo ae_algo = { -- 1.9.1

1 0